diff options
author | Bill Pemberton <wfp5p@virginia.edu> | 2009-03-27 11:30:39 -0400 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-06-19 11:00:28 -0700 |
commit | 9ef4dea6eb9ff671ffd62f5304c7d8de716807a2 (patch) | |
tree | 5802233f81931db218f751097e46532db630128c /drivers/staging/comedi | |
parent | 6a438139a8963839a9b14709286075b2e38cf9e0 (diff) |
Staging: comedi: remove C99 comments in cb_pcidas64.c
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/comedi')
-rw-r--r-- | drivers/staging/comedi/drivers/cb_pcidas64.c | 598 |
1 files changed, 299 insertions, 299 deletions
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index 1a580bd2247..7b57e3ab79c 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -93,8 +93,8 @@ TODO: #include "plx9080.h" #include "comedi_fc.h" -#undef PCIDAS64_DEBUG // disable debugging code -//#define PCIDAS64_DEBUG // enable debugging code +#undef PCIDAS64_DEBUG /* disable debugging code */ +/* #define PCIDAS64_DEBUG enable debugging code */ #ifdef PCIDAS64_DEBUG #define DEBUG_PRINT(format, args...) rt_printk(format , ## args ) @@ -102,8 +102,8 @@ TODO: #define DEBUG_PRINT(format, args...) #endif -#define TIMER_BASE 25 // 40MHz master clock -#define PRESCALED_TIMER_BASE 10000 // 100kHz 'prescaled' clock for slow aquisition, maybe I'll support this someday +#define TIMER_BASE 25 /* 40MHz master clock */ +#define PRESCALED_TIMER_BASE 10000 /* 100kHz 'prescaled' clock for slow aquisition, maybe I'll support this someday */ #define DMA_BUFFER_SIZE 0x1000 /* maximum value that can be loaded into board's 24-bit counters*/ @@ -111,41 +111,41 @@ static const int max_counter_value = 0xffffff; /* PCI-DAS64xxx base addresses */ -// indices of base address regions +/* indices of base address regions */ enum base_address_regions { PLX9080_BADDRINDEX = 0, MAIN_BADDRINDEX = 2, DIO_COUNTER_BADDRINDEX = 3, }; -// priv(dev)->main_iobase registers +/* priv(dev)->main_iobase registers */ enum write_only_registers { - INTR_ENABLE_REG = 0x0, // interrupt enable register - HW_CONFIG_REG = 0x2, // hardware config register + INTR_ENABLE_REG = 0x0, /* interrupt enable register */ + HW_CONFIG_REG = 0x2, /* hardware config register */ DAQ_SYNC_REG = 0xc, DAQ_ATRIG_LOW_4020_REG = 0xc, - ADC_CONTROL0_REG = 0x10, // adc control register 0 - ADC_CONTROL1_REG = 0x12, // adc control register 1 + ADC_CONTROL0_REG = 0x10, /* adc control register 0 */ + ADC_CONTROL1_REG = 0x12, /* adc control register 1 */ CALIBRATION_REG = 0x14, - ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16, // lower 16 bits of adc sample interval counter - ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18, // upper 8 bits of adc sample interval counter - ADC_DELAY_INTERVAL_LOWER_REG = 0x1a, // lower 16 bits of delay interval counter - ADC_DELAY_INTERVAL_UPPER_REG = 0x1c, // upper 8 bits of delay interval counter - ADC_COUNT_LOWER_REG = 0x1e, // lower 16 bits of hardware conversion/scan counter - ADC_COUNT_UPPER_REG = 0x20, // upper 8 bits of hardware conversion/scan counter - ADC_START_REG = 0x22, // software trigger to start aquisition - ADC_CONVERT_REG = 0x24, // initiates single conversion - ADC_QUEUE_CLEAR_REG = 0x26, // clears adc queue - ADC_QUEUE_LOAD_REG = 0x28, // loads adc queue + ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16, /* lower 16 bits of adc sample interval counter */ + ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18, /* upper 8 bits of adc sample interval counter */ + ADC_DELAY_INTERVAL_LOWER_REG = 0x1a, /* lower 16 bits of delay interval counter */ + ADC_DELAY_INTERVAL_UPPER_REG = 0x1c, /* upper 8 bits of delay interval counter */ + ADC_COUNT_LOWER_REG = 0x1e, /* lower 16 bits of hardware conversion/scan counter */ + ADC_COUNT_UPPER_REG = 0x20, /* upper 8 bits of hardware conversion/scan counter */ + ADC_START_REG = 0x22, /* software trigger to start aquisition */ + ADC_CONVERT_REG = 0x24, /* initiates single conversion */ + ADC_QUEUE_CLEAR_REG = 0x26, /* clears adc queue */ + ADC_QUEUE_LOAD_REG = 0x28, /* loads adc queue */ ADC_BUFFER_CLEAR_REG = 0x2a, - ADC_QUEUE_HIGH_REG = 0x2c, // high channel for internal queue, use adc_chan_bits() inline above - DAC_CONTROL0_REG = 0x50, // dac control register 0 - DAC_CONTROL1_REG = 0x52, // dac control register 0 - DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54, // lower 16 bits of dac sample interval counter - DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56, // upper 8 bits of dac sample interval counter + ADC_QUEUE_HIGH_REG = 0x2c, /* high channel for internal queue, use adc_chan_bits() inline above */ + DAC_CONTROL0_REG = 0x50, /* dac control register 0 */ + DAC_CONTROL1_REG = 0x52, /* dac control register 0 */ + DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54, /* lower 16 bits of dac sample interval counter */ + DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56, /* upper 8 bits of dac sample interval counter */ DAC_SELECT_REG = 0x60, DAC_START_REG = 0x64, - DAC_BUFFER_CLEAR_REG = 0x66, // clear dac buffer + DAC_BUFFER_CLEAR_REG = 0x66, /* clear dac buffer */ }; static inline unsigned int dac_convert_reg(unsigned int channel) { @@ -161,7 +161,7 @@ static inline unsigned int dac_msb_4020_reg(unsigned int channel) } enum read_only_registers { - HW_STATUS_REG = 0x0, // hardware status register, reading this apparently clears pending interrupts as well + HW_STATUS_REG = 0x0, /* hardware status register, reading this apparently clears pending interrupts as well */ PIPE1_READ_REG = 0x4, ADC_READ_PNTR_REG = 0x8, LOWER_XFER_REG = 0x10, @@ -170,13 +170,13 @@ enum read_only_registers { }; enum read_write_registers { - I8255_4020_REG = 0x48, // 8255 offset, for 4020 only - ADC_QUEUE_FIFO_REG = 0x100, // external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG + I8255_4020_REG = 0x48, /* 8255 offset, for 4020 only */ + ADC_QUEUE_FIFO_REG = 0x100, /* external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG */ ADC_FIFO_REG = 0x200, /* adc data fifo */ DAC_FIFO_REG = 0x300, /* dac data fifo, has weird interactions with external channel queue */ }; -// priv(dev)->dio_counter_iobase registers +/* priv(dev)->dio_counter_iobase registers */ enum dio_counter_registers { DIO_8255_OFFSET = 0x0, DO_REG = 0x20, @@ -185,47 +185,47 @@ enum dio_counter_registers { DIO_DATA_60XX_REG = 0x48, }; -// bit definitions for write-only registers +/* bit definitions for write-only registers */ enum intr_enable_contents { - ADC_INTR_SRC_MASK = 0x3, // bits that set adc interrupt source - ADC_INTR_QFULL_BITS = 0x0, // interrupt fifo quater full - ADC_INTR_EOC_BITS = 0x1, // interrupt end of conversion - ADC_INTR_EOSCAN_BITS = 0x2, // interrupt end of scan - ADC_INTR_EOSEQ_BITS = 0x3, // interrupt end of sequence (probably wont use this it's pretty fancy) - EN_ADC_INTR_SRC_BIT = 0x4, // enable adc interrupt source - EN_ADC_DONE_INTR_BIT = 0x8, // enable adc aquisition done interrupt + ADC_INTR_SRC_MASK = 0x3, /* bits that set adc interrupt source */ + ADC_INTR_QFULL_BITS = 0x0, /* interrupt fifo quater full */ + ADC_INTR_EOC_BITS = 0x1, /* interrupt end of conversion */ + ADC_INTR_EOSCAN_BITS = 0x2, /* interrupt end of scan */ + ADC_INTR_EOSEQ_BITS = 0x3, /* interrupt end of sequence (probably wont use this it's pretty fancy) */ + EN_ADC_INTR_SRC_BIT = 0x4, /* enable adc interrupt source */ + EN_ADC_DONE_INTR_BIT = 0x8, /* enable adc aquisition done interrupt */ DAC_INTR_SRC_MASK = 0x30, DAC_INTR_QEMPTY_BITS = 0x0, DAC_INTR_HIGH_CHAN_BITS = 0x10, - EN_DAC_INTR_SRC_BIT = 0x40, // enable dac interrupt source + EN_DAC_INTR_SRC_BIT = 0x40, /* enable dac interrupt source */ EN_DAC_DONE_INTR_BIT = 0x80, - EN_ADC_ACTIVE_INTR_BIT = 0x200, // enable adc active interrupt - EN_ADC_STOP_INTR_BIT = 0x400, // enable adc stop trigger interrupt - EN_DAC_ACTIVE_INTR_BIT = 0x800, // enable dac active interrupt - EN_DAC_UNDERRUN_BIT = 0x4000, // enable dac underrun status bit - EN_ADC_OVERRUN_BIT = 0x8000, // enable adc overrun status bit + EN_ADC_ACTIVE_INTR_BIT = 0x200, /* enable adc active interrupt */ + EN_ADC_STOP_INTR_BIT = 0x400, /* enable adc stop trigger interrupt */ + EN_DAC_ACTIVE_INTR_BIT = 0x800, /* enable dac active interrupt */ + EN_DAC_UNDERRUN_BIT = 0x4000, /* enable dac underrun status bit */ + EN_ADC_OVERRUN_BIT = 0x8000, /* enable adc overrun status bit */ }; enum hw_config_contents { - MASTER_CLOCK_4020_MASK = 0x3, // bits that specify master clock source for 4020 - INTERNAL_CLOCK_4020_BITS = 0x1, // use 40 MHz internal master clock for 4020 - BNC_CLOCK_4020_BITS = 0x2, // use BNC input for master clock - EXT_CLOCK_4020_BITS = 0x3, // use dio input for master clock - EXT_QUEUE_BIT = 0x200, // use external channel/gain queue (more versatile than internal queue) - SLOW_DAC_BIT = 0x400, // use 225 nanosec strobe when loading dac instead of 50 nanosec - HW_CONFIG_DUMMY_BITS = 0x2000, // bit with unknown function yet given as default value in pci-das64 manual - DMA_CH_SELECT_BIT = 0x8000, // bit selects channels 1/0 for analog input/output, otherwise 0/1 - FIFO_SIZE_REG = 0x4, // allows adjustment of fifo sizes - DAC_FIFO_SIZE_MASK = 0xff00, // bits that set dac fifo size + MASTER_CLOCK_4020_MASK = 0x3, /* bits that specify master clock source for 4020 */ + INTERNAL_CLOCK_4020_BITS = 0x1, /* use 40 MHz internal master clock for 4020 */ + BNC_CLOCK_4020_BITS = 0x2, /* use BNC input for master clock */ + EXT_CLOCK_4020_BITS = 0x3, /* use dio input for master clock */ + EXT_QUEUE_BIT = 0x200, /* use external channel/gain queue (more versatile than internal queue) */ + SLOW_DAC_BIT = 0x400, /* use 225 nanosec strobe when loading dac instead of 50 nanosec */ + HW_CONFIG_DUMMY_BITS = 0x2000, /* bit with unknown function yet given as default value in pci-das64 manual */ + DMA_CH_SELECT_BIT = 0x8000, /* bit selects channels 1/0 for analog input/output, otherwise 0/1 */ + FIFO_SIZE_REG = 0x4, /* allows adjustment of fifo sizes */ + DAC_FIFO_SIZE_MASK = 0xff00, /* bits that set dac fifo size */ DAC_FIFO_BITS = 0xf800, /* 8k sample ao fifo */ }; #define DAC_FIFO_SIZE 0x2000 enum daq_atrig_low_4020_contents { - EXT_AGATE_BNC_BIT = 0x8000, // use trig/ext clk bnc input for analog gate signal - EXT_STOP_TRIG_BNC_BIT = 0x4000, // use trig/ext clk bnc input for external stop trigger signal - EXT_START_TRIG_BNC_BIT = 0x2000, // use trig/ext clk bnc input for external start trigger signal + EXT_AGATE_BNC_BIT = 0x8000, /* use trig/ext clk bnc input for analog gate signal */ + EXT_STOP_TRIG_BNC_BIT = 0x4000, /* use trig/ext clk bnc input for external stop trigger signal */ + EXT_START_TRIG_BNC_BIT = 0x2000, /* use trig/ext clk bnc input for external start trigger signal */ }; static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold) { @@ -233,34 +233,34 @@ static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold) } enum adc_control0_contents { - ADC_GATE_SRC_MASK = 0x3, // bits that select gate - ADC_SOFT_GATE_BITS = 0x1, // software gate - ADC_EXT_GATE_BITS = 0x2, // external digital gate - ADC_ANALOG_GATE_BITS = 0x3, // analog level gate - ADC_GATE_LEVEL_BIT = 0x4, // level-sensitive gate (for digital) - ADC_GATE_POLARITY_BIT = 0x8, // gate active low + ADC_GATE_SRC_MASK = 0x3, /* bits that select gate */ + ADC_SOFT_GATE_BITS = 0x1, /* software gate */ + ADC_EXT_GATE_BITS = 0x2, /* external digital gate */ + ADC_ANALOG_GATE_BITS = 0x3, /* analog level gate */ + ADC_GATE_LEVEL_BIT = 0x4, /* level-sensitive gate (for digital) */ + ADC_GATE_POLARITY_BIT = 0x8, /* gate active low */ ADC_START_TRIG_SOFT_BITS = 0x10, ADC_START_TRIG_EXT_BITS = 0x20, ADC_START_TRIG_ANALOG_BITS = 0x30, ADC_START_TRIG_MASK = 0x30, - ADC_START_TRIG_FALLING_BIT = 0x40, // trig 1 uses falling edge - ADC_EXT_CONV_FALLING_BIT = 0x800, // external pacing uses falling edge - ADC_SAMPLE_COUNTER_EN_BIT = 0x1000, // enable hardware scan counter - ADC_DMA_DISABLE_BIT = 0x4000, // disables dma - ADC_ENABLE_BIT = 0x8000, // master adc enable + ADC_START_TRIG_FALLING_BIT = 0x40, /* trig 1 uses falling edge */ + ADC_EXT_CONV_FALLING_BIT = 0x800, /* external pacing uses falling edge */ + ADC_SAMPLE_COUNTER_EN_BIT = 0x1000, /* enable hardware scan counter */ + ADC_DMA_DISABLE_BIT = 0x4000, /* disables dma */ + ADC_ENABLE_BIT = 0x8000, /* master adc enable */ }; enum adc_control1_contents { - ADC_QUEUE_CONFIG_BIT = 0x1, // should be set for boards with > 16 channels + ADC_QUEUE_CONFIG_BIT = 0x1, /* should be set for boards with > 16 channels */ CONVERT_POLARITY_BIT = 0x10, EOC_POLARITY_BIT = 0x20, - ADC_SW_GATE_BIT = 0x40, // software gate of adc - ADC_DITHER_BIT = 0x200, // turn on extra noise for dithering + ADC_SW_GATE_BIT = 0x40, /* software gate of adc */ + ADC_DITHER_BIT = 0x200, /* turn on extra noise for dithering */ RETRIGGER_BIT = 0x800, ADC_LO_CHANNEL_4020_MASK = 0x300, ADC_HI_CHANNEL_4020_MASK = 0xc00, - TWO_CHANNEL_4020_BITS = 0x1000, // two channel mode for 4020 - FOUR_CHANNEL_4020_BITS = 0x2000, // four channel mode for 4020 + TWO_CHANNEL_4020_BITS = 0x1000, /* two channel mode for 4020 */ + FOUR_CHANNEL_4020_BITS = 0x2000, /* four channel mode for 4020 */ CHANNEL_MODE_4020_MASK = 0x3000, ADC_MODE_MASK = 0xf000, }; @@ -281,10 +281,10 @@ enum calibration_contents { SELECT_8800_BIT = 0x1, SELECT_8402_64XX_BIT = 0x2, SELECT_1590_60XX_BIT = 0x2, - CAL_EN_64XX_BIT = 0x40, // calibration enable for 64xx series + CAL_EN_64XX_BIT = 0x40, /* calibration enable for 64xx series */ SERIAL_DATA_IN_BIT = 0x80, SERIAL_CLOCK_BIT = 0x100, - CAL_EN_60XX_BIT = 0x200, // calibration enable for 60xx series + CAL_EN_60XX_BIT = 0x200, /* calibration enable for 60xx series */ CAL_GAIN_BIT = 0x800, }; /* calibration sources for 6025 are: @@ -308,11 +308,11 @@ static inline uint16_t adc_convert_chan_4020_bits(unsigned int channel) }; enum adc_queue_load_contents { - UNIP_BIT = 0x800, // unipolar/bipolar bit - ADC_SE_DIFF_BIT = 0x1000, // single-ended/ differential bit - ADC_COMMON_BIT = 0x2000, // non-referenced single-ended (common-mode input) - QUEUE_EOSEQ_BIT = 0x4000, // queue end of sequence - QUEUE_EOSCAN_BIT = 0x8000, // queue end of scan + UNIP_BIT = 0x800, /* unipolar/bipolar bit */ + ADC_SE_DIFF_BIT = 0x1000, /* single-ended/ differential bit */ + ADC_COMMON_BIT = 0x2000, /* non-referenced single-ended (common-mode input) */ + QUEUE_EOSEQ_BIT = 0x4000, /* queue end of sequence */ + QUEUE_EOSCAN_BIT = 0x8000, /* queue end of scan */ }; static inline uint16_t adc_chan_bits(unsigned int channel) { @@ -320,7 +320,7 @@ static inline uint16_t adc_chan_bits(unsigned int channel) }; enum dac_control0_contents { - DAC_ENABLE_BIT = 0x8000, // dac controller enable bit + DAC_ENABLE_BIT = 0x8000, /* dac controller enable bit */ DAC_CYCLIC_STOP_BIT = 0x4000, DAC_WAVEFORM_MODE_BIT = 0x100, DAC_EXT_UPDATE_FALLING_BIT = 0x80, @@ -340,14 +340,14 @@ enum dac_control1_contents { DAC_WRITE_POLARITY_BIT = 0x800, /* board-dependent setting */ DAC1_EXT_REF_BIT = 0x200, DAC0_EXT_REF_BIT = 0x100, - DAC_OUTPUT_ENABLE_BIT = 0x80, // dac output enable bit + DAC_OUTPUT_ENABLE_BIT = 0x80, /* dac output enable bit */ DAC_UPDATE_POLARITY_BIT = 0x40, /* board-dependent setting */ DAC_SW_GATE_BIT = 0x20, DAC1_UNIPOLAR_BIT = 0x8, DAC0_UNIPOLAR_BIT = 0x2, }; -// bit definitions for read-only registers +/* bit definitions for read-only registers */ enum hw_status_contents { DAC_UNDERRUN_BIT = 0x1, ADC_OVERRUN_BIT = 0x2, @@ -378,7 +378,7 @@ static inline unsigned int adc_upper_write_ptr_code(uint16_t prepost_bits) return (prepost_bits >> 14) & 0x3; } -// I2C addresses for 4020 +/* I2C addresses for 4020 */ enum i2c_addresses { RANGE_CAL_I2C_ADDR = 0x20, CALDAC0_I2C_ADDR = 0xc, @@ -386,8 +386,8 @@ enum i2c_addresses { }; enum range_cal_i2c_contents { - ADC_SRC_4020_MASK = 0x70, // bits that set what source the adc converter measures - BNC_TRIG_THRESHOLD_0V_BIT = 0x80, // make bnc trig/ext clock threshold 0V instead of 2.5V + ADC_SRC_4020_MASK = 0x70, /* bits that set what source the adc converter measures */ + BNC_TRIG_THRESHOLD_0V_BIT = 0x80, /* make bnc trig/ext clock threshold 0V instead of 2.5V */ }; static inline uint8_t adc_src_4020_bits(unsigned int source) { @@ -395,11 +395,11 @@ static inline uint8_t adc_src_4020_bits(unsigned int source) }; static inline uint8_t attenuate_bit(unsigned int channel) { - // attenuate channel (+-5V input range) + /* attenuate channel (+-5V input range) */ return 1 << (channel & 0x3); }; -// analog input ranges for 64xx boards +/* analog input ranges for 64xx boards */ static const struct comedi_lrange ai_ranges_64xx = { 8, { @@ -468,7 +468,7 @@ static const struct comedi_lrange ai_ranges_6052 = { } }; -// analog input ranges for 4020 board +/* analog input ranges for 4020 board */ static const struct comedi_lrange ai_ranges_4020 = { 2, { @@ -477,7 +477,7 @@ static const struct comedi_lrange ai_ranges_4020 = { } }; -// analog output ranges +/* analog output ranges */ static const struct comedi_lrange ao_ranges_64xx = { 4, { @@ -543,18 +543,18 @@ struct hw_fifo_info { struct pcidas64_board { const char *name; - int device_id; // pci device id - int ai_se_chans; // number of ai inputs in single-ended mode - int ai_bits; // analog input resolution - int ai_speed; // fastest conversion period in ns + int device_id; /* pci device id */ + int ai_se_chans; /* number of ai inputs in single-ended mode */ + int ai_bits; /* analog input resolution */ + int ai_speed; /* fastest conversion period in ns */ const struct comedi_lrange *ai_range_table; - int ao_nchan; // number of analog out channels - int ao_bits; // analog output resolution - int ao_scan_speed; // analog output speed (for a scan, not conversion) + int ao_nchan; /* number of analog out channels */ + int ao_bits; /* analog output resolution */ + int ao_scan_speed; /* analog output speed (for a scan, not conversion) */ const struct comedi_lrange *ao_range_table; const int *ao_range_code; const struct hw_fifo_info *const ai_fifo; - enum register_layout layout; // different board families have slightly different registers + enum register_layout layout; /* different board families have slightly different registers */ unsigned has_8255:1; }; @@ -612,7 +612,7 @@ static const struct pcidas64_board pcidas64_boards[] = { has_8255:1, }, { - name: "pci-das6402/12", // XXX check + name: "pci-das6402/12", /* XXX check */ device_id:0x1e, ai_se_chans:64, ai_bits: 12, @@ -910,7 +910,7 @@ static const struct pcidas64_board pcidas64_boards[] = { ai_speed:50, ao_bits: 12, ao_nchan:2, - ao_scan_speed:0, // no hardware pacing on ao + ao_scan_speed:0, /* no hardware pacing on ao */ layout: LAYOUT_4020, ai_range_table:&ai_ranges_4020, ao_range_table:&ao_ranges_4020, @@ -921,7 +921,7 @@ static const struct pcidas64_board pcidas64_boards[] = { #if 0 { name: "pci-das6402/16/jr", - device_id:0 // XXX, + device_id:0 /* XXX, */ ai_se_chans:64, ai_bits: 16, ai_speed:5000, @@ -934,7 +934,7 @@ static const struct pcidas64_board pcidas64_boards[] = { }, { name: "pci-das64/m1/16/jr", - device_id:0 // XXX, + device_id:0 /* XXX, */ ai_se_chans:64, ai_bits: 16, ai_speed:1000, @@ -947,7 +947,7 @@ static const struct pcidas64_board pcidas64_boards[] = { }, { name: "pci-das64/m2/16/jr", - device_id:0 // XXX, + device_id:0 /* XXX, */ ai_se_chans:64, ai_bits: 16, ai_speed:500, @@ -960,7 +960,7 @@ static const struct pcidas64_board pcidas64_boards[] = { }, { name: "pci-das64/m3/16/jr", - device_id:0 // XXX, + device_id:0 /* XXX, */ ai_se_chans:64, ai_bits: 16, ai_speed:333, @@ -973,7 +973,7 @@ static const struct pcidas64_board pcidas64_boards[] = { }, { name: "pci-das64/m1/14", - device_id:0, // XXX + device_id:0, /* XXX */ ai_se_chans:64, ai_bits: 14, ai_speed:1000, @@ -986,7 +986,7 @@ static const struct pcidas64_board pcidas64_boards[] = { }, { name: "pci-das64/m2/14", - device_id:0, // XXX + device_id:0, /* XXX */ ai_se_chans:64, ai_bits: 14, ai_speed:500, @@ -999,7 +999,7 @@ static const struct pcidas64_board pcidas64_boards[] = { }, { name: "pci-das64/m3/14", - device_id:0, // XXX + device_id:0, /* XXX */ ai_se_chans:64, ai_bits: 14, ai_speed:333, @@ -1013,7 +1013,7 @@ static const struct pcidas64_board pcidas64_boards[] = { #endif }; -// Number of boards in cb_pcidas_boards +/* Number of boards in cb_pcidas_boards */ static inline unsigned int num_boards(void) { return sizeof(pcidas64_boards) / sizeof(struct pcidas64_board); @@ -1060,50 +1060,50 @@ static inline unsigned short se_diff_bit_6xxx(struct comedi_device * dev, }; struct ext_clock_info { - unsigned int divisor; // master clock divisor to use for scans with external master clock - unsigned int chanspec; // chanspec for master clock input when used as scan begin src + unsigned int divisor; /* master clock divisor to use for scans with external master clock */ + unsigned int chanspec; /* chanspec for master clock input when used as scan begin src */ }; /* this structure is for data unique to this hardware driver. */ struct pcidas64_private { - struct pci_dev *hw_dev; // pointer to board's pci_dev struct - // base addresses (physical) + struct pci_dev *hw_dev; /* pointer to board's pci_dev struct */ + /* base addresses (physical) */ resource_size_t plx9080_phys_iobase; resource_size_t main_phys_iobase; resource_size_t dio_counter_phys_iobase; - // base addresses (ioremapped) + /* base addresses (ioremapped) */ void *plx9080_iobase; void *main_iobase; void *dio_counter_iobase; - // local address (used by dma controller) + /* local address (used by dma controller) */ uint32_t local0_iobase; uint32_t local1_iobase; - volatile unsigned int ai_count; // number of analog input samples remaining - uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT]; // dma buffers for analog input - dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT]; // physical addresses of ai dma buffers - struct plx_dma_desc *ai_dma_desc; // array of ai dma descriptors read by plx9080, allocated to get proper alignment - dma_addr_t ai_dma_desc_bus_addr; // physical address of ai dma descriptor array - volatile unsigned int ai_dma_index; // index of the ai dma descriptor/buffer that is currently being used - uint16_t *ao_buffer[AO_DMA_RING_COUNT]; // dma buffers for analog output - dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT]; // physical addresses of ao dma buffers + volatile unsigned int ai_count; /* number of analog input samples remaining */ + uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT]; /* dma buffers for analog input */ + dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT]; /* physical addresses of ai dma buffers */ + struct plx_dma_desc *ai_dma_desc; /* array of ai dma descriptors read by plx9080, allocated to get proper alignment */ + dma_addr_t ai_dma_desc_bus_addr; /* physical address of ai dma descriptor array */ + volatile unsigned int ai_dma_index; /* index of the ai dma descriptor/buffer that is currently being used */ + uint16_t *ao_buffer[AO_DMA_RING_COUNT]; /* dma buffers for analog output */ + dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT]; /* physical addresses of ao dma buffers */ struct plx_dma_desc *ao_dma_desc; dma_addr_t ao_dma_desc_bus_addr; - volatile unsigned int ao_dma_index; // keeps track of buffer where the next ao sample should go - volatile unsigned long ao_count; // number of analog output samples remaining - volatile unsigned int ao_value[2]; // remember what the analog outputs are set to, to allow readback - unsigned int hw_revision; // stc chip hardware revision number - volatile unsigned int intr_enable_bits; // last bits sent to INTR_ENABLE_REG register - volatile uint16_t adc_control1_bits; // last bits sent to ADC_CONTROL1_REG register - volatile uint16_t fifo_size_bits; // last bits sent to FIFO_SIZE_REG register - volatile uint16_t hw_config_bits; // last bits sent to HW_CONFIG_REG register + volatile unsigned int ao_dma_index; /* keeps track of buffer where the next ao sample should go */ + volatile unsigned long ao_count; /* number of analog output samples remaining */ + volatile unsigned int ao_value[2]; /* remember what the analog outputs are set to, to allow readback */ + unsigned int hw_revision; /* stc chip hardware revision number */ + volatile unsigned int intr_enable_bits; /* last bits sent to INTR_ENABLE_REG register */ + volatile uint16_t adc_control1_bits; /* last bits sent to ADC_CONTROL1_REG register */ + volatile uint16_t fifo_size_bits; /* last bits sent to FIFO_SIZE_REG register */ + volatile uint16_t hw_config_bits; /* last bits sent to HW_CONFIG_REG register */ volatile uint16_t dac_control1_bits; - volatile uint32_t plx_control_bits; // last bits written to plx9080 control register - volatile uint32_t plx_intcsr_bits; // last bits written to plx interrupt control and status register - volatile int calibration_source; // index of calibration source readable through ai ch0 - volatile uint8_t i2c_cal_range_bits; // bits written to i2c calibration/range register - volatile unsigned int ext_trig_falling; // configure digital triggers to trigger on falling edge - // states of various devices stored to enable read-back + volatile uint32_t plx_control_bits; /* last bits written to plx9080 control register */ + volatile uint32_t plx_intcsr_bits; /* last bits written to plx interrupt control and status register */ + volatile int calibration_source; /* index of calibration source readable through ai ch0 */ + volatile uint8_t i2c_cal_range_bits; /* bits written to i2c calibration/range register */ + volatile unsigned int ext_trig_falling; /* configure digital triggers to trigger on falling edge */ + /* states of various devices stored to enable read-back */ unsigned int ad8402_state[2]; unsigned int caldac_state[8]; volatile short ai_cmd_running; @@ -1185,7 +1185,7 @@ static void caldac_write(struct comedi_device * dev, unsigned int channel, unsigned int value); static int caldac_8800_write(struct comedi_device * dev, unsigned int address, uint8_t value); -//static int dac_1590_write(struct comedi_device *dev, unsigned int dac_a, unsigned int dac_b); +/* static int dac_1590_write(struct comedi_device *dev, unsigned int dac_a, unsigned int dac_b); */ static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_channel, unsigned int value); static void abort_dma(struct comedi_device * dev, unsigned int channel); @@ -1274,7 +1274,7 @@ static inline int ao_cmd_is_supported(const struct pcidas64_board * board) return board->ao_nchan && board->layout != LAYOUT_4020; } -// initialize plx9080 chip +/* initialize plx9080 chip */ static void init_plx9080(struct comedi_device * dev) { uint32_t bits; @@ -1283,7 +1283,7 @@ static void init_plx9080(struct comedi_device * dev) priv(dev)->plx_control_bits = readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG); - // plx9080 dump + /* plx9080 dump */ DEBUG_PRINT(" plx interrupt status 0x%x\n", readl(plx_iobase + PLX_INTRCS_REG)); DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG)); @@ -1327,35 +1327,35 @@ static void init_plx9080(struct comedi_device * dev) abort_dma(dev, 0); abort_dma(dev, 1); - // configure dma0 mode + /* configure dma0 mode */ bits = 0; - // enable ready input, not sure if this is necessary + /* enable ready input, not sure if this is necessary */ bits |= PLX_DMA_EN_READYIN_BIT; - // enable bterm, not sure if this is necessary + /* enable bterm, not sure if this is necessary */ bits |= PLX_EN_BTERM_BIT; - // enable dma chaining + /* enable dma chaining */ bits |= PLX_EN_CHAIN_BIT; - // enable interrupt on dma done (probably don't need this, since chain never finishes) + /* enable interrupt on dma done (probably don't need this, since chain never finishes) */ bits |= PLX_EN_DMA_DONE_INTR_BIT; - // don't increment local address during transfers (we are transferring from a fixed fifo register) + /* don't increment local address during transfers (we are transferring from a fixed fifo register) */ bits |= PLX_LOCAL_ADDR_CONST_BIT; - // route dma interrupt to pci bus + /* route dma interrupt to pci bus */ bits |= PLX_DMA_INTR_PCI_BIT; - // enable demand mode + /* enable demand mode */ bits |= PLX_DEMAND_MODE_BIT; - // enable local burst mode + /* enable local burst mode */ bits |= PLX_DMA_LOCAL_BURST_EN_BIT; - // 4020 uses 32 bit dma + /* 4020 uses 32 bit dma */ if (board(dev)->layout == LAYOUT_4020) { bits |= PLX_LOCAL_BUS_32_WIDE_BITS; - } else { // localspace0 bus is 16 bits wide + } else { /* localspace0 bus is 16 bits wide */ bits |= PLX_LOCAL_BUS_16_WIDE_BITS; } writel(bits, plx_iobase + PLX_DMA1_MODE_REG); if (ao_cmd_is_supported(board(dev))) writel(bits, plx_iobase + PLX_DMA0_MODE_REG); - // enable interrupts on plx 9080 + /* enable interrupts on plx 9080 */ priv(dev)->plx_intcsr_bits |= ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE | ICS_DMA0_E | ICS_DMA1_E; @@ -1396,9 +1396,9 @@ static int setup_subdevices(struct comedi_device * dev) if (board(dev)->layout == LAYOUT_4020) { unsigned int i; uint8_t data; - // set adc to read from inputs (not internal calibration sources) + /* set adc to read from inputs (not internal calibration sources) */ priv(dev)->i2c_cal_range_bits = adc_src_4020_bits(4); - // set channels to +-5 volt input ranges + /* set channels to +-5 volt input ranges */ for (i = 0; i < s->n_chan; i++) priv(dev)->i2c_cal_range_bits |= attenuate_bit(i); data = priv(dev)->i2c_cal_range_bits; @@ -1428,7 +1428,7 @@ static int setup_subdevices(struct comedi_device * dev) s->type = COMEDI_SUBD_UNUSED; } - // digital input + /* digital input */ s = dev->subdevices + 2; if (board(dev)->layout == LAYOUT_64XX) { s->type = COMEDI_SUBD_DI; @@ -1440,7 +1440,7 @@ static int setup_subdevices(struct comedi_device * dev) } else s->type = COMEDI_SUBD_UNUSED; - // digital output + /* digital output */ if (board(dev)->layout == LAYOUT_64XX) { s = dev->subdevices + 3; s->type = COMEDI_SUBD_DO; @@ -1469,7 +1469,7 @@ static int setup_subdevices(struct comedi_device * dev) } else s->type = COMEDI_SUBD_UNUSED; - // 8 channel dio for 60xx + /* 8 channel dio for 60xx */ s = dev->subdevices + 5; if (board(dev)->layout == LAYOUT_60XX) { s->type = COMEDI_SUBD_DIO; @@ -1482,7 +1482,7 @@ static int setup_subdevices(struct comedi_device * dev) } else s->type = COMEDI_SUBD_UNUSED; - // caldac + /* caldac */ s = dev->subdevices + 6; s->type = COMEDI_SUBD_CALIB; s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; @@ -1496,7 +1496,7 @@ static int setup_subdevices(struct comedi_device * dev) for (i = 0; i < s->n_chan; i++) caldac_write(dev, i, s->maxdata / 2); - // 2 channel ad8402 potentiometer + /* 2 channel ad8402 potentiometer */ s = dev->subdevices + 7; if (board(dev)->layout == LAYOUT_64XX) { s->type = COMEDI_SUBD_CALIB; @@ -1510,7 +1510,7 @@ static int setup_subdevices(struct comedi_device * dev) } else s->type = COMEDI_SUBD_UNUSED; - //serial EEPROM, if present + /* serial EEPROM, if present */ s = dev->subdevices + 8; if (readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG) & CTL_EECHK) { s->type = COMEDI_SUBD_MEMORY; @@ -1521,7 +1521,7 @@ static int setup_subdevices(struct comedi_device * dev) } else s->type = COMEDI_SUBD_UNUSED; - // user counter subd XXX + /* user counter subd XXX */ s = dev->subdevices + 9; s->type = COMEDI_SUBD_UNUSED; @@ -1542,13 +1542,13 @@ static void init_stc_registers(struct comedi_device * dev) comedi_spin_lock_irqsave(&dev->spinlock, flags); - // bit should be set for 6025, although docs say boards with <= 16 chans should be cleared XXX + /* bit should be set for 6025, although docs say boards with <= 16 chans should be cleared XXX */ if (1) priv(dev)->adc_control1_bits |= ADC_QUEUE_CONFIG_BIT; writew(priv(dev)->adc_control1_bits, priv(dev)->main_iobase + ADC_CONTROL1_REG); - // 6402/16 manual says this register must be initialized to 0xff? + /* 6402/16 manual says this register must be initialized to 0xff? */ writew(0xff, priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); bits = SLOW_DAC_BIT | DMA_CH_SELECT_BIT; @@ -1563,7 +1563,7 @@ static void init_stc_registers(struct comedi_device * dev) comedi_spin_unlock_irqrestore(&dev->spinlock, flags); - // set fifos to maximum size + /* set fifos to maximum size */ priv(dev)->fifo_size_bits |= DAC_FIFO_BITS; set_ai_fifo_segment_length(dev, board(dev)->ai_fifo->max_segment_length); @@ -1581,7 +1581,7 @@ int alloc_and_init_dma_members(struct comedi_device * dev) { int i; - // alocate pci dma buffers + /* alocate pci dma buffers */ for (i = 0; i < ai_dma_ring_count(board(dev)); i++) { priv(dev)->ai_buffer[i] = pci_alloc_consistent(priv(dev)->hw_dev, DMA_BUFFER_SIZE, @@ -1601,7 +1601,7 @@ int alloc_and_init_dma_members(struct comedi_device * dev) } } } - // allocate dma descriptors + /* allocate dma descriptors */ priv(dev)->ai_dma_desc = pci_alloc_consistent(priv(dev)->hw_dev, sizeof(struct plx_dma_desc) * ai_dma_ring_count(board(dev)), @@ -1622,7 +1622,7 @@ int alloc_and_init_dma_members(struct comedi_device * dev) DEBUG_PRINT("ao dma descriptors start at bus addr 0x%x\n", priv(dev)->ao_dma_desc_bus_addr); } - // initialize dma descriptors + /* initialize dma descriptors */ for (i = 0; i < ai_dma_ring_count(board(dev)); i++) { priv(dev)->ai_dma_desc[i].pci_start_addr = cpu_to_le32(priv(dev)->ai_buffer_bus_addr[i]); @@ -1697,16 +1697,16 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); pcidev != NULL; pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { - // is it not a computer boards card? + /* is it not a computer boards card? */ if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS) continue; - // loop through cards supported by this driver + /* loop through cards supported by this driver */ for (index = 0; index < num_boards(); index++) { if (pcidas64_boards[index].device_id != pcidev->device) continue; - // was a particular bus/slot requested? + /* was a particular bus/slot requested? */ if (it->options[0] || it->options[1]) { - // are we on the wrong bus/slot? + /* are we on the wrong bus/slot? */ if (pcidev->bus->number != it->options[0] || PCI_SLOT(pcidev->devfn) != it->options[1]) { @@ -1736,7 +1736,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) } pci_set_master(pcidev); - //Initialize dev->board_name + /* Initialize dev->board_name */ dev->board_name = board(dev)->name; priv(dev)->plx9080_phys_iobase = @@ -1746,7 +1746,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) priv(dev)->dio_counter_phys_iobase = pci_resource_start(pcidev, DIO_COUNTER_BADDRINDEX); - // remap, won't work with 2.0 kernels but who cares + /* remap, won't work with 2.0 kernels but who cares */ priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase, pci_resource_len(pcidev, PLX9080_BADDRINDEX)); priv(dev)->main_iobase = ioremap(priv(dev)->main_phys_iobase, @@ -1766,7 +1766,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) DEBUG_PRINT(" diocounter remapped to 0x%p\n", priv(dev)->dio_counter_iobase); - // figure out what local addresses are + /* figure out what local addresses are */ local_range = readl(priv(dev)->plx9080_iobase + PLX_LAS0RNG_REG) & LRNG_MEM_MASK; @@ -1798,7 +1798,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it) printk(" stc hardware revision %i\n", priv(dev)->hw_revision); init_plx9080(dev); init_stc_registers(dev); - // get irq + /* get irq */ if (comedi_request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED, "cb_pcidas64", dev)) { printk(" unable to allocate irq %u\n", pcidev->irq); @@ -1841,7 +1841,7 @@ static int detach(struct comedi_device * dev) iounmap((void *)priv(dev)->main_iobase); if (priv(dev)->dio_counter_iobase) iounmap((void *)priv(dev)->dio_counter_iobase); - // free pci dma buffers + /* free pci dma buffers */ for (i = 0; i < ai_dma_ring_count(board(dev)); i++) { if (priv(dev)->ai_buffer[i]) pci_free_consistent(priv(dev)->hw_dev, @@ -1858,7 +1858,7 @@ static int detach(struct comedi_device * dev) priv(dev)-> ao_buffer_bus_addr[i]); } - // free dma descriptors + /* free dma descriptors */ if (priv(dev)->ai_dma_desc) pci_free_consistent(priv(dev)->hw_dev, sizeof(struct plx_dma_desc) * @@ -1896,8 +1896,8 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, range = CR_RANGE(insn->chanspec); aref = CR_AREF(insn->chanspec); - // disable card's analog input interrupt sources and pacing - // 4020 generates dac done interrupts even though they are disabled + /* disable card's analog input interrupt sources and pacing */ + /* 4020 generates dac done interrupts even though they are disabled */ disable_ai_pacing(dev); comedi_spin_lock_irqsave(&dev->spinlock, flags); @@ -1910,12 +1910,12 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, comedi_spin_unlock_irqrestore(&dev->spinlock, flags); if (board(dev)->layout != LAYOUT_4020) { - // use internal queue + /* use internal queue */ priv(dev)->hw_config_bits &= ~EXT_QUEUE_BIT; writew(priv(dev)->hw_config_bits, priv(dev)->main_iobase + HW_CONFIG_REG); - // ALT_SOURCE is internal calibration reference + /* ALT_SOURCE is internal calibration reference */ if (insn->chanspec & CR_ALT_SOURCE) { unsigned int cal_en_bit; @@ -1924,27 +1924,27 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, cal_en_bit = CAL_EN_60XX_BIT; else cal_en_bit = CAL_EN_64XX_BIT; - // select internal reference source to connect to channel 0 + /* select internal reference source to connect to channel 0 */ writew(cal_en_bit | adc_src_bits(priv(dev)-> calibration_source), priv(dev)->main_iobase + CALIBRATION_REG); } else { - // make sure internal calibration source is turned off + /* make sure internal calibration source is turned off */ writew(0, priv(dev)->main_iobase + CALIBRATION_REG); } - // load internal queue + /* load internal queue */ bits = 0; - // set gain + /* set gain */ bits |= ai_range_bits_6xxx(dev, CR_RANGE(insn->chanspec)); - // set single-ended / differential + /* set single-ended / differential */ bits |= se_diff_bit_6xxx(dev, aref == AREF_DIFF); if (aref == AREF_COMMON) bits |= ADC_COMMON_BIT; bits |= adc_chan_bits(channel); - // set stop channel + /* set stop channel */ writew(adc_chan_bits(channel), priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG); - // set start channel, and rest of settings + /* set start channel, and rest of settings */ writew(bits, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG); } else { uint8_t old_cal_range_bits = priv(dev)->i2c_cal_range_bits; @@ -1955,16 +1955,16 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(priv(dev)-> calibration_source); - } else { //select BNC inputs + } else { /* select BNC inputs */ priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4); } - // select range + /* select range */ if (range == 0) priv(dev)->i2c_cal_range_bits |= attenuate_bit(channel); else priv(dev)->i2c_cal_range_bits &= ~attenuate_bit(channel); - // update calibration/range i2c register only if necessary, as it is very slow + /* update calibration/range i2c register only if necessary, as it is very slow */ if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) { uint8_t i2c_data = priv(dev)->i2c_cal_range_bits; i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data, @@ -1981,14 +1981,14 @@ static int ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, for (n = 0; n < insn->n; n++) { - // clear adc buffer (inside loop for 4020 sake) + /* clear adc buffer (inside loop for 4020 sake) */ writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG); /* trigger conversion, bits sent only matter for 4020 */ writew(adc_convert_chan_4020_bits(CR_CHAN(insn->chanspec)), priv(dev)->main_iobase + ADC_CONVERT_REG); - // wait for data + /* wait for data */ for (i = 0; i < timeout; i++) { bits = readw(priv(dev)->main_iobase + HW_STATUS_REG); DEBUG_PRINT(" pipe bits 0x%x\n", pipe_full_bits(bits)); @@ -2092,7 +2092,7 @@ static int ai_config_master_clock_4020(struct comedi_device * dev, unsigned int return retval ? retval : 5; } -// XXX could add support for 60xx series +/* XXX could add support for 60xx series */ static int ai_config_master_clock(struct comedi_device * dev, unsigned int * data) { @@ -2182,7 +2182,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, /* step 2: make sure trigger sources are unique and mutually compatible */ - // uniqueness check + /* uniqueness check */ if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) err++; if (cmd->scan_begin_src != TRIG_TIMER && @@ -2196,7 +2196,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_EXT) err++; - // compatibility check + /* compatibility check */ if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER) err++; if (cmd->stop_src != TRIG_COUNT && @@ -2220,7 +2220,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, err++; } if (cmd->scan_begin_src == TRIG_TIMER) { - // if scans are timed faster than conversion rate allows + /* if scans are timed faster than conversion rate allows */ if (cmd->convert_arg * cmd->chanlist_len > cmd->scan_begin_arg) { cmd->scan_begin_arg = @@ -2278,7 +2278,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, if (err) return 4; - // make sure user is doesn't change analog reference mid chanlist + /* make sure user is doesn't change analog reference mid chanlist */ if (cmd->chanlist) { aref = CR_AREF(cmd->chanlist[0]); for (i = 1; i < cmd->chanlist_len; i++) { @@ -2289,7 +2289,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, break; } } - // check 4020 chanlist + /* check 4020 chanlist */ if (board(dev)->layout == LAYOUT_4020) { unsigned int first_channel = CR_CHAN(cmd->chanlist[0]); for (i = 1; i < cmd->chanlist_len; i++) { @@ -2317,7 +2317,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, static int use_hw_sample_counter(struct comedi_cmd * cmd) { -// disable for now until I work out a race +/* disable for now until I work out a race */ return 0; if (cmd->stop_src == TRIG_COUNT && cmd->stop_arg <= max_counter_value) @@ -2329,10 +2329,10 @@ static int use_hw_sample_counter(struct comedi_cmd * cmd) static void setup_sample_counters(struct comedi_device * dev, struct comedi_cmd * cmd) { if (cmd->stop_src == TRIG_COUNT) { - // set software count + /* set software count */ priv(dev)->ai_count = cmd->stop_arg * cmd->chanlist_len; } - // load hardware conversion counter + /* load hardware conversion counter */ if (use_hw_sample_counter(cmd)) { writew(cmd->stop_arg & 0xffff, priv(dev)->main_iobase + ADC_COUNT_LOWER_REG); @@ -2396,9 +2396,9 @@ static void enable_ai_interrupts(struct comedi_device * dev, const struct comedi bits = EN_ADC_OVERRUN_BIT | EN_ADC_DONE_INTR_BIT | EN_ADC_ACTIVE_INTR_BIT | EN_ADC_STOP_INTR_BIT; - // Use pio transfer and interrupt on end of conversion if TRIG_WAKE_EOS flag is set. + /* Use pio transfer and interrupt on end of conversion if TRIG_WAKE_EOS flag is set. */ if (cmd->flags & TRIG_WAKE_EOS) { - // 4020 doesn't support pio transfers except for fifo dregs + /* 4020 doesn't support pio transfers except for fifo dregs */ if (board(dev)->layout != LAYOUT_4020) bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT; } @@ -2413,14 +2413,14 @@ static void enable_ai_interrupts(struct comedi_device * dev, const struct comedi static uint32_t ai_convert_counter_6xxx(const struct comedi_device * dev, const struct comedi_cmd * cmd) { - // supposed to load counter with desired divisor minus 3 + /* supposed to load counter with desired divisor minus 3 */ return cmd->convert_arg / TIMER_BASE - 3; } static uint32_t ai_scan_counter_6xxx(struct comedi_device * dev, struct comedi_cmd * cmd) { uint32_t count; - // figure out how long we need to delay at end of scan + /* figure out how long we need to delay at end of scan */ switch (cmd->scan_begin_src) { case TRIG_TIMER: count = (cmd->scan_begin_arg - @@ -2448,20 +2448,20 @@ static uint32_t ai_convert_counter_4020(struct comedi_device * dev, struct comed case TRIG_OTHER: divisor = priv(dev)->ext_clock.divisor; break; - default: // should never happen + default: /* should never happen */ comedi_error(dev, "bug! failed to set ai pacing!"); divisor = 1000; break; } - // supposed to load counter with desired divisor minus 2 for 4020 + /* supposed to load counter with desired divisor minus 2 for 4020 */ return divisor - 2; } static void select_master_clock_4020(struct comedi_device * dev, const struct comedi_cmd * cmd) { - // select internal/external master clock + /* select internal/external master clock */ priv(dev)->hw_config_bits &= ~MASTER_CLOCK_4020_MASK; if (cmd->scan_begin_src == TRIG_OTHER) { int chanspec = priv(dev)->ext_clock.chanspec; @@ -2492,7 +2492,7 @@ static inline void dma_start_sync(struct comedi_device * dev, unsigned int chann { unsigned long flags; - // spinlock for plx dma control/status reg + /* spinlock for plx dma control/status reg */ comedi_spin_lock_irqsave(&dev->spinlock, flags); if (channel) writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | @@ -2520,17 +2520,17 @@ static void set_ai_pacing(struct comedi_device * dev, struct comedi_cmd * cmd) scan_counter = ai_scan_counter_6xxx(dev, cmd); } - // load lower 16 bits of convert interval + /* load lower 16 bits of convert interval */ writew(convert_counter & 0xffff, priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG); DEBUG_PRINT("convert counter 0x%x\n", convert_counter); - // load upper 8 bits of convert interval + /* load upper 8 bits of convert interval */ writew((convert_counter >> 16) & 0xff, priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); - // load lower 16 bits of scan delay + /* load lower 16 bits of scan delay */ writew(scan_counter & 0xffff, priv(dev)->main_iobase + ADC_DELAY_INTERVAL_LOWER_REG); - // load upper 8 bits of scan delay + /* load upper 8 bits of scan delay */ writew((scan_counter >> 16) & 0xff, priv(dev)->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG); DEBUG_PRINT("scan counter 0x%x\n", scan_counter); @@ -2563,25 +2563,25 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c writew(priv(dev)->hw_config_bits, priv(dev)->main_iobase + HW_CONFIG_REG); bits = 0; - // set channel + /* set channel */ bits |= adc_chan_bits(CR_CHAN(cmd->chanlist[0])); - // set gain + /* set gain */ bits |= ai_range_bits_6xxx(dev, CR_RANGE(cmd->chanlist[0])); - // set single-ended / differential + /* set single-ended / differential */ bits |= se_diff_bit_6xxx(dev, CR_AREF(cmd->chanlist[0]) == AREF_DIFF); if (CR_AREF(cmd->chanlist[0]) == AREF_COMMON) bits |= ADC_COMMON_BIT; - // set stop channel + /* set stop channel */ writew(adc_chan_bits(CR_CHAN(cmd->chanlist[cmd-> chanlist_len - 1])), priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG); - // set start channel, and rest of settings + /* set start channel, and rest of settings */ writew(bits, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG); } else { - // use external queue + /* use external queue */ if (dev->write_subdev && dev->write_subdev->busy) { warn_external_queue(dev); return -EBUSY; @@ -2589,26 +2589,26 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c priv(dev)->hw_config_bits |= EXT_QUEUE_BIT; writew(priv(dev)->hw_config_bits, priv(dev)->main_iobase + HW_CONFIG_REG); - // clear DAC buffer to prevent weird interactions + /* clear DAC buffer to prevent weird interactions */ writew(0, priv(dev)->main_iobase + DAC_BUFFER_CLEAR_REG); - // clear queue pointer + /* clear queue pointer */ writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG); - // load external queue + /* load external queue */ for (i = 0; i < cmd->chanlist_len; i++) { bits = 0; - // set channel + /* set channel */ bits |= adc_chan_bits(CR_CHAN(cmd-> chanlist[i])); - // set gain + /* set gain */ bits |= ai_range_bits_6xxx(dev, CR_RANGE(cmd->chanlist[i])); - // set single-ended / differential + /* set single-ended / differential */ bits |= se_diff_bit_6xxx(dev, CR_AREF(cmd->chanlist[i]) == AREF_DIFF); if (CR_AREF(cmd->chanlist[i]) == AREF_COMMON) bits |= ADC_COMMON_BIT; - // mark end of queue + /* mark end of queue */ if (i == cmd->chanlist_len - 1) bits |= QUEUE_EOSCAN_BIT | QUEUE_EOSEQ_BIT; @@ -2622,7 +2622,7 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c /* doing a queue clear is not specified in board docs, * but required for reliable operation */ writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG); - // prime queue holding register + /* prime queue holding register */ writew(0, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG); } } else { @@ -2630,9 +2630,9 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c priv(dev)->i2c_cal_range_bits; priv(dev)->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK; - //select BNC inputs + /* select BNC inputs */ priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4); - // select ranges + /* select ranges */ for (i = 0; i < cmd->chanlist_len; i++) { unsigned int channel = CR_CHAN(cmd->chanlist[i]); unsigned int range = CR_RANGE(cmd->chanlist[i]); @@ -2644,7 +2644,7 @@ static int setup_channel_queue(struct comedi_device * dev, const struct comedi_c priv(dev)->i2c_cal_range_bits &= ~attenuate_bit(channel); } - // update calibration/range i2c register only if necessary, as it is very slow + /* update calibration/range i2c register only if necessary, as it is very slow */ if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) { uint8_t i2c_data = priv(dev)->i2c_cal_range_bits; i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data, @@ -2697,7 +2697,7 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) if (retval < 0) return retval; - // make sure internal calibration source is turned off + /* make sure internal calibration source is turned off */ writew(0, priv(dev)->main_iobase + CALIBRATION_REG); set_ai_pacing(dev, cmd); @@ -2713,9 +2713,9 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) if (board(dev)->layout != LAYOUT_4020) { priv(dev)->adc_control1_bits &= ~ADC_MODE_MASK; if (cmd->convert_src == TRIG_EXT) - priv(dev)->adc_control1_bits |= adc_mode_bits(13); // good old mode 13 + priv(dev)->adc_control1_bits |= adc_mode_bits(13); /* good old mode 13 */ else - priv(dev)->adc_control1_bits |= adc_mode_bits(8); // mode 8. What else could you need? + priv(dev)->adc_control1_bits |= adc_mode_bits(8); /* mode 8. What else could you need? */ } else { priv(dev)->adc_control1_bits &= ~CHANNEL_MODE_4020_MASK; if (cmd->chanlist_len == 4) @@ -2735,20 +2735,20 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) DEBUG_PRINT("control1 bits 0x%x\n", priv(dev)->adc_control1_bits); comedi_spin_unlock_irqrestore(&dev->spinlock, flags); - // clear adc buffer + /* clear adc buffer */ writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG); if ((cmd->flags & TRIG_WAKE_EOS) == 0 || board(dev)->layout == LAYOUT_4020) { priv(dev)->ai_dma_index = 0; - // set dma transfer size + /* set dma transfer size */ for (i = 0; i < ai_dma_ring_count(board(dev)); i++) priv(dev)->ai_dma_desc[i].transfer_size = cpu_to_le32(dma_transfer_size(dev) * sizeof(uint16_t)); - // give location of first dma descriptor + /* give location of first dma descriptor */ load_first_dma_descriptor(dev, 1, priv(dev)-> ai_dma_desc_bus_addr | PLX_DESC_IN_PCI_BIT | @@ -2773,7 +2773,7 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) bits = ADC_ENABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT; if (cmd->flags & TRIG_WAKE_EOS) bits |= ADC_DMA_DISABLE_BIT; - // set start trigger + /* set start trigger */ if (cmd->start_src == TRIG_EXT) { bits |= ADC_START_TRIG_EXT_BITS; if (cmd->start_arg & CR_INVERT) @@ -2789,7 +2789,7 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) comedi_spin_unlock_irqrestore(&dev->spinlock, flags); - // start aquisition + /* start aquisition */ if (cmd->start_src == TRIG_NOW) { writew(0, priv(dev)->main_iobase + ADC_START_REG); DEBUG_PRINT("soft trig\n"); @@ -2798,7 +2798,7 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) return 0; } -// read num_samples from 16 bit wide ai fifo +/* read num_samples from 16 bit wide ai fifo */ static void pio_drain_ai_fifo_16(struct comedi_device * dev) { struct comedi_subdevice *s = dev->read_subdev; @@ -2810,7 +2810,7 @@ static void pio_drain_ai_fifo_16(struct comedi_device * dev) int num_samples; do { - // get least significant 15 bits + /* get least significant 15 bits */ read_index = readw(priv(dev)->main_iobase + ADC_READ_PNTR_REG) & 0x7fff; @@ -2899,7 +2899,7 @@ static void pio_drain_ai_fifo_32(struct comedi_device * dev) priv(dev)->ai_count -= i; } -// empty fifo +/* empty fifo */ static void pio_drain_ai_fifo(struct comedi_device * dev) { if (board(dev)->layout == LAYOUT_4020) { @@ -2923,7 +2923,7 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel) pci_addr_reg = priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG; - // loop until we have read all the full buffers + /* loop until we have read all the full buffers */ for (j = 0, next_transfer_addr = readl(pci_addr_reg); (next_transfer_addr < priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index] @@ -2931,7 +2931,7 @@ static void drain_dma_buffers(struct comedi_device * dev, unsigned int channel) priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index] + DMA_BUFFER_SIZE) && j < ai_dma_ring_count(board(dev)); j++) { - // transfer data from dma buffer to comedi buffer + /* transfer data from dma buffer to comedi buffer */ num_samples = dma_transfer_size(dev); if (async->cmd.stop_src == TRIG_COUNT) { if (num_samples > priv(dev)->ai_count) @@ -2963,15 +2963,15 @@ void handle_ai_interrupt(struct comedi_device * dev, unsigned short status, uint8_t dma1_status; unsigned long flags; - // check for fifo overrun + /* check for fifo overrun */ if (status & ADC_OVERRUN_BIT) { comedi_error(dev, "fifo overrun"); async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; } - // spin lock makes sure noone else changes plx dma control reg + /* spin lock makes sure noone else changes plx dma control reg */ comedi_spin_lock_irqsave(&dev->spinlock, flags); dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG); - if (plx_status & ICS_DMA1_A) { // dma chan 1 interrupt + if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG); DEBUG_PRINT("dma1 status 0x%x\n", dma1_status); @@ -2986,7 +2986,7 @@ void handle_ai_interrupt(struct comedi_device * dev, unsigned short status, if (status & ADC_DONE_BIT) DEBUG_PRINT("adc done interrupt\n"); - // drain fifo with pio + /* drain fifo with pio */ if ((status & ADC_DONE_BIT) || ((cmd->flags & TRIG_WAKE_EOS) && (status & ADC_INTR_PENDING_BIT) && @@ -2999,7 +2999,7 @@ void handle_ai_interrupt(struct comedi_device * dev, unsigned short status, } else comedi_spin_unlock_irqrestore(&dev->spinlock, flags); } - // if we are have all the data, then quit + /* if we are have all the data, then quit */ if ((cmd->stop_src == TRIG_COUNT && priv(dev)->ai_count <= 0) || (cmd->stop_src == TRIG_EXT && (status & ADC_STOP_BIT))) { async->events |= COMEDI_CB_EOA; @@ -3091,10 +3091,10 @@ static void handle_ao_interrupt(struct comedi_device * dev, unsigned short statu async = s->async; cmd = &async->cmd; - // spin lock makes sure noone else changes plx dma control reg + /* spin lock makes sure noone else changes plx dma control reg */ comedi_spin_lock_irqsave(&dev->spinlock, flags); dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG); - if (plx_status & ICS_DMA0_A) { // dma chan 0 interrupt + if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */ if ((dma0_status & PLX_DMA_EN_BIT) && !(dma0_status & PLX_DMA_DONE_BIT)) writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT, @@ -3152,8 +3152,8 @@ static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG) handle_ai_interrupt(dev, status, plx_status); handle_ao_interrupt(dev, status, plx_status); - // clear possible plx9080 interrupt sources - if (plx_status & ICS_LDIA) { // clear local doorbell interrupt + /* clear possible plx9080 interrupt sources */ + if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */ plx_bits = readl(priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG); writel(plx_bits, priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG); DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits); @@ -3168,7 +3168,7 @@ void abort_dma(struct comedi_device * dev, unsigned int channel) { unsigned long flags; - // spinlock for plx dma control/status reg + /* spinlock for plx dma control/status reg */ comedi_spin_lock_irqsave(&dev->spinlock, flags); plx9080_abort_dma(priv(dev)->plx9080_iobase, channel); @@ -3202,15 +3202,15 @@ static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s, int chan = CR_CHAN(insn->chanspec); int range = CR_RANGE(insn->chanspec); - // do some initializing + /* do some initializing */ writew(0, priv(dev)->main_iobase + DAC_CONTROL0_REG); - // set range + /* set range */ set_dac_range_bits(dev, &priv(dev)->dac_control1_bits, chan, range); writew(priv(dev)->dac_control1_bits, priv(dev)->main_iobase + DAC_CONTROL1_REG); - // write to channel + /* write to channel */ if (board(dev)->layout == LAYOUT_4020) { writew(data[0] & 0xff, priv(dev)->main_iobase + dac_lsb_4020_reg(chan)); @@ -3220,7 +3220,7 @@ static int ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s, writew(data[0], priv(dev)->main_iobase + dac_convert_reg(chan)); } - // remember output value + /* remember output value */ priv(dev)->ao_value[chan] = data[0]; return 1; @@ -3503,14 +3503,14 @@ static int ao_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, /* step 2: make sure trigger sources are unique and mutually compatible */ - // uniqueness check + /* uniqueness check */ if (cmd->start_src != TRIG_INT && cmd->start_src != TRIG_EXT) err++; if (cmd->scan_begin_src != TRIG_TIMER && cmd->scan_begin_src != TRIG_EXT) err++; - // compatibility check + /* compatibility check */ if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER) err++; if (cmd->stop_src != TRIG_COUNT && @@ -3624,9 +3624,9 @@ static int do_wbits(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) { data[0] &= 0xf; - // zero bits we are going to change + /* zero bits we are going to change */ s->state &= ~data[0]; - // set new bits + /* set new bits */ s->state |= data[0] & data[1]; writeb(s->state, priv(dev)->dio_counter_iobase + DO_REG); @@ -3793,24 +3793,24 @@ static uint16_t read_eeprom(struct comedi_device * dev, uint8_t address) comedi_udelay(eeprom_comedi_udelay); priv(dev)->plx_control_bits &= ~CTL_EE_CLK & ~CTL_EE_CS; - // make sure we don't send anything to the i2c bus on 4020 + /* make sure we don't send anything to the i2c bus on 4020 */ priv(dev)->plx_control_bits |= CTL_USERO; writel(priv(dev)->plx_control_bits, plx_control_addr); - // activate serial eeprom + /* activate serial eeprom */ comedi_udelay(eeprom_comedi_udelay); priv(dev)->plx_control_bits |= CTL_EE_CS; writel(priv(dev)->plx_control_bits, plx_control_addr); - // write read command and desired memory address + /* write read command and desired memory address */ for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) { - // set bit to be written + /* set bit to be written */ comedi_udelay(eeprom_comedi_udelay); if (bitstream & bit) priv(dev)->plx_control_bits |= CTL_EE_W; else priv(dev)->plx_control_bits &= ~CTL_EE_W; writel(priv(dev)->plx_control_bits, plx_control_addr); - // clock in bit + /* clock in bit */ comedi_udelay(eeprom_comedi_udelay); priv(dev)->plx_control_bits |= CTL_EE_CLK; writel(priv(dev)->plx_control_bits, plx_control_addr); @@ -3818,10 +3818,10 @@ static uint16_t read_eeprom(struct comedi_device * dev, uint8_t address) priv(dev)->plx_control_bits &= ~CTL_EE_CLK; writel(priv(dev)->plx_control_bits, plx_control_addr); } - // read back value from eeprom memory location + /* read back value from eeprom memory location */ value = 0; for (bit = 1 << (value_length - 1); bit; bit >>= 1) { - // clock out bit + /* clock out bit */ comedi_udelay(eeprom_comedi_udelay); priv(dev)->plx_control_bits |= CTL_EE_CLK; writel(priv(dev)->plx_control_bits, plx_control_addr); @@ -3833,7 +3833,7 @@ static uint16_t read_eeprom(struct comedi_device * dev, uint8_t address) value |= bit; } - // deactivate eeprom serial input + /* deactivate eeprom serial input */ comedi_udelay(eeprom_comedi_udelay); priv(dev)->plx_control_bits &= ~CTL_EE_CS; writel(priv(dev)->plx_control_bits, plx_control_addr); @@ -3880,7 +3880,7 @@ static void check_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) if (cmd->scan_begin_src == TRIG_TIMER) { scan_divisor = get_divisor(cmd->scan_begin_arg, cmd->flags); if (cmd->convert_src == TRIG_TIMER) { - // XXX check for integer overflows + /* XXX check for integer overflows */ min_scan_divisor = convert_divisor * cmd->chanlist_len; max_scan_divisor = (convert_divisor * cmd->chanlist_len - 1) + @@ -3926,7 +3926,7 @@ static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags) return get_divisor(ns, flags) - 2; } -// adjusts the size of hardware fifo (which determines block size for dma xfers) +/* adjusts the size of hardware fifo (which determines block size for dma xfers) */ static int set_ai_fifo_size(struct comedi_device * dev, unsigned int num_samples) { unsigned int num_fifo_entries; @@ -3947,7 +3947,7 @@ static int set_ai_fifo_size(struct comedi_device * dev, unsigned int num_samples return num_samples; } -// query length of fifo +/* query length of fifo */ static unsigned int ai_fifo_size(struct comedi_device * dev) { return priv(dev)->ai_fifo_segment_length * @@ -3968,7 +3968,7 @@ static int set_ai_fifo_segment_length(struct comedi_device * dev, if (num_entries > fifo->max_segment_length) num_entries = fifo->max_segment_length; - // 1 == 256 entries, 2 == 512 entries, etc + /* 1 == 256 entries, 2 == 512 entries, etc */ num_increments = (num_entries + increment_size / 2) / increment_size; bits = (~(num_increments - 1)) & fifo->fifo_size_reg_mask; @@ -4037,14 +4037,14 @@ static int caldac_8800_write(struct comedi_device * dev, unsigned int address, return 0; } -// 4020 caldacs +/* 4020 caldacs */ static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_channel, unsigned int value) { uint8_t serial_bytes[3]; uint8_t i2c_addr; enum pointer_bits { - // manual has gain and offset bits switched + /* manual has gain and offset bits switched */ OFFSET_0_2 = 0x1, GAIN_0_2 = 0x2, OFFSET_1_3 = 0x4, @@ -4055,35 +4055,35 @@ static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_chan }; switch (caldac_channel) { - case 0: // chan 0 offset + case 0: /* chan 0 offset */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = OFFSET_0_2; break; - case 1: // chan 1 offset + case 1: /* chan 1 offset */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = OFFSET_1_3; break; - case 2: // chan 2 offset + case 2: /* chan 2 offset */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = OFFSET_0_2; break; - case 3: // chan 3 offset + case 3: /* chan 3 offset */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = OFFSET_1_3; break; - case 4: // chan 0 gain + case 4: /* chan 0 gain */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = GAIN_0_2; break; - case 5: // chan 1 gain + case 5: /* chan 1 gain */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = GAIN_1_3; break; - case 6: // chan 2 gain + case 6: /* chan 2 gain */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = GAIN_0_2; break; - case 7: // chan 3 gain + case 7: /* chan 3 gain */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = GAIN_1_3; break; @@ -4098,22 +4098,22 @@ static int caldac_i2c_write(struct comedi_device * dev, unsigned int caldac_chan return 0; } -// Their i2c requires a huge delay on setting clock or data high for some reason +/* Their i2c requires a huge delay on setting clock or data high for some reason */ static const int i2c_high_comedi_udelay = 1000; static const int i2c_low_comedi_udelay = 10; -// set i2c data line high or low +/* set i2c data line high or low */ static void i2c_set_sda(struct comedi_device * dev, int state) { static const int data_bit = CTL_EE_W; void *plx_control_addr = priv(dev)->plx9080_iobase + PLX_CONTROL_REG; if (state) { - // set data line high + /* set data line high */ priv(dev)->plx_control_bits &= ~data_bit; writel(priv(dev)->plx_control_bits, plx_control_addr); comedi_udelay(i2c_high_comedi_udelay); - } else // set data line low + } else /* set data line low */ { priv(dev)->plx_control_bits |= data_bit; writel(priv(dev)->plx_control_bits, plx_control_addr); @@ -4121,18 +4121,18 @@ static void i2c_set_sda(struct comedi_device * dev, int state) } } -// set i2c clock line high or low +/* set i2c clock line high or low */ static void i2c_set_scl(struct comedi_device * dev, int state) { static const int clock_bit = CTL_USERO; void *plx_control_addr = priv(dev)->plx9080_iobase + PLX_CONTROL_REG; if (state) { - // set clock line high + /* set clock line high */ priv(dev)->plx_control_bits &= ~clock_bit; writel(priv(dev)->plx_control_bits, plx_control_addr); comedi_udelay(i2c_high_comedi_udelay); - } else // set clock line low + } else /* set clock line low */ { priv(dev)->plx_control_bits |= clock_bit; writel(priv(dev)->plx_control_bits, plx_control_addr); @@ -4157,17 +4157,17 @@ static void i2c_write_byte(struct comedi_device * dev, uint8_t byte) } } -// we can't really read the lines, so fake it +/* we can't really read the lines, so fake it */ static int i2c_read_ack(struct comedi_device * dev) { i2c_set_scl(dev, 0); i2c_set_sda(dev, 1); i2c_set_scl(dev, 1); - return 0; // return fake acknowledge bit + return 0; /* return fake acknowledge bit */ } -// send start bit +/* send start bit */ static void i2c_start(struct comedi_device * dev) { i2c_set_scl(dev, 1); @@ -4175,7 +4175,7 @@ static void i2c_start(struct comedi_device * dev) i2c_set_sda(dev, 0); } -// send stop bit +/* send stop bit */ static void i2c_stop(struct comedi_device * dev) { i2c_set_scl(dev, 0); @@ -4191,25 +4191,25 @@ static void i2c_write(struct comedi_device * dev, unsigned int address, uint8_t bitstream; static const int read_bit = 0x1; -//XXX need mutex to prevent simultaneous attempts to access eeprom and i2c bus +/* XXX need mutex to prevent simultaneous attempts to access eeprom and i2c bus */ - // make sure we dont send anything to eeprom + /* make sure we dont send anything to eeprom */ priv(dev)->plx_control_bits &= ~CTL_EE_CS; i2c_stop(dev); i2c_start(dev); - // send address and write bit + /* send address and write bit */ bitstream = (address << 1) & ~read_bit; i2c_write_byte(dev, bitstream); - // get acknowledge + /* get acknowledge */ if (i2c_read_ack(dev) != 0) { comedi_error(dev, "i2c write failed: no acknowledge"); i2c_stop(dev); return; } - // write data bytes + /* write data bytes */ for (i = 0; i < length; i++) { i2c_write_byte(dev, data[i]); if (i2c_read_ack(dev) != 0) { |