diff options
author | David S. Miller <davem@davemloft.net> | 2010-03-15 16:23:54 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-03-15 16:23:54 -0700 |
commit | 4961e02f1999e1c3468c09b2669c94d7c3ae82a8 (patch) | |
tree | 44c15abb09d7ba5e17a9aba95ee246648b1c1a8a /drivers/staging/rar_register | |
parent | d14a0ebda7d3daede1a99c01527affb9ceaa4c22 (diff) | |
parent | a3d3203e4bb40f253b1541e310dc0f9305be7c84 (diff) |
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Diffstat (limited to 'drivers/staging/rar_register')
-rw-r--r-- | drivers/staging/rar_register/Kconfig | 30 | ||||
-rw-r--r-- | drivers/staging/rar_register/Makefile | 2 | ||||
-rw-r--r-- | drivers/staging/rar_register/rar_register.c | 615 | ||||
-rw-r--r-- | drivers/staging/rar_register/rar_register.h | 84 |
4 files changed, 731 insertions, 0 deletions
diff --git a/drivers/staging/rar_register/Kconfig b/drivers/staging/rar_register/Kconfig new file mode 100644 index 00000000000..3f73839643e --- /dev/null +++ b/drivers/staging/rar_register/Kconfig @@ -0,0 +1,30 @@ +# +# RAR device configuration +# + +menu "RAR Register Driver" +# +# Restricted Access Register Manager +# +config RAR_REGISTER + tristate "Restricted Access Region Register Driver" + default n + ---help--- + This driver allows other kernel drivers access to the + contents of the restricted access region control + registers. + + The restricted access region control registers + (rar_registers) are used to pass address and + locking information on restricted access regions + to other drivers that use restricted access regions + + The restricted access regions are regions of memory + on the Intel MID Platform that are not accessible to + the x86 processor, but are accessible to dedicated + processors on board peripheral devices. + + The purpose of the restricted access regions is to + protect sensitive data from compromise by unauthorized + programs running on the x86 processor. +endmenu diff --git a/drivers/staging/rar_register/Makefile b/drivers/staging/rar_register/Makefile new file mode 100644 index 00000000000..d5954ccc16c --- /dev/null +++ b/drivers/staging/rar_register/Makefile @@ -0,0 +1,2 @@ +EXTRA_CFLAGS += -DLITTLE__ENDIAN +obj-$(CONFIG_RAR_REGISTER) += rar_register.o diff --git a/drivers/staging/rar_register/rar_register.c b/drivers/staging/rar_register/rar_register.c new file mode 100644 index 00000000000..bfc0e31f1a6 --- /dev/null +++ b/drivers/staging/rar_register/rar_register.c @@ -0,0 +1,615 @@ +/* + * rar_register.c - An Intel Restricted Access Region register driver + * + * Copyright(c) 2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + * ------------------------------------------------------------------- + * 20091204 Mark Allyn <mark.a.allyn@intel.com> + * Ossama Othman <ossama.othman@intel.com> + * Cleanup per feedback from Alan Cox and Arjan Van De Ven + * + * 20090806 Ossama Othman <ossama.othman@intel.com> + * Return zero high address if upper 22 bits is zero. + * Cleaned up checkpatch errors. + * Clarified that driver is dealing with bus addresses. + * + * 20090702 Ossama Othman <ossama.othman@intel.com> + * Removed unnecessary include directives + * Cleaned up spinlocks. + * Cleaned up logging. + * Improved invalid parameter checks. + * Fixed and simplified RAR address retrieval and RAR locking + * code. + * + * 20090626 Mark Allyn <mark.a.allyn@intel.com> + * Initial publish + */ + +#define DEBUG 1 + +#include "rar_register.h" + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/kernel.h> + +/* === Lincroft Message Bus Interface === */ +/* Message Control Register */ +#define LNC_MCR_OFFSET 0xD0 + +/* Maximum number of clients (other drivers using this driver) */ +#define MAX_RAR_CLIENTS 10 + +/* Message Data Register */ +#define LNC_MDR_OFFSET 0xD4 + +/* Message Opcodes */ +#define LNC_MESSAGE_READ_OPCODE 0xD0 +#define LNC_MESSAGE_WRITE_OPCODE 0xE0 + +/* Message Write Byte Enables */ +#define LNC_MESSAGE_BYTE_WRITE_ENABLES 0xF + +/* B-unit Port */ +#define LNC_BUNIT_PORT 0x3 + +/* === Lincroft B-Unit Registers - Programmed by IA32 firmware === */ +#define LNC_BRAR0L 0x10 +#define LNC_BRAR0H 0x11 +#define LNC_BRAR1L 0x12 +#define LNC_BRAR1H 0x13 + +/* Reserved for SeP */ +#define LNC_BRAR2L 0x14 +#define LNC_BRAR2H 0x15 + +/* Moorestown supports three restricted access regions. */ +#define MRST_NUM_RAR 3 + + +/* RAR Bus Address Range */ +struct RAR_address_range { + dma_addr_t low; + dma_addr_t high; +}; + +/* Structure containing low and high RAR register offsets. */ +struct RAR_offsets { + u32 low; /* Register offset for low RAR bus address. */ + u32 high; /* Register offset for high RAR bus address. */ +}; + +struct client { + int (*client_callback)(void *client_data); + void *customer_data; + int client_called; + }; + +static DEFINE_MUTEX(rar_mutex); +static DEFINE_MUTEX(lnc_reg_mutex); + +struct RAR_device { + struct RAR_offsets const rar_offsets[MRST_NUM_RAR]; + struct RAR_address_range rar_addr[MRST_NUM_RAR]; + struct pci_dev *rar_dev; + bool registered; + }; + +/* this platform has only one rar_device for 3 rar regions */ +static struct RAR_device my_rar_device = { + .rar_offsets = { + [0].low = LNC_BRAR0L, + [0].high = LNC_BRAR0H, + [1].low = LNC_BRAR1L, + [1].high = LNC_BRAR1H, + [2].low = LNC_BRAR2L, + [2].high = LNC_BRAR2H + } +}; + +/* this data is for handling requests from other drivers which arrive + * prior to this driver initializing + */ + +static struct client clients[MAX_RAR_CLIENTS]; +static int num_clients; + +/* + * This function is used to retrieved RAR info using the Lincroft + * message bus interface. + */ +static int retrieve_rar_addr(struct pci_dev *pdev, + int offset, + dma_addr_t *addr) +{ + /* + * ======== The Lincroft Message Bus Interface ======== + * Lincroft registers may be obtained from the PCI + * (the Host Bridge) using the Lincroft Message Bus + * Interface. That message bus interface is generally + * comprised of two registers: a control register (MCR, 0xDO) + * and a data register (MDR, 0xD4). + * + * The MCR (message control register) format is the following: + * 1. [31:24]: Opcode + * 2. [23:16]: Port + * 3. [15:8]: Register Offset + * 4. [7:4]: Byte Enables (use 0xF to set all of these bits + * to 1) + * 5. [3:0]: reserved + * + * Read (0xD0) and write (0xE0) opcodes are written to the + * control register when reading and writing to Lincroft + * registers, respectively. + * + * We're interested in registers found in the Lincroft + * B-unit. The B-unit port is 0x3. + * + * The six B-unit RAR register offsets we use are listed + * earlier in this file. + * + * Lastly writing to the MCR register requires the "Byte + * enables" bits to be set to 1. This may be achieved by + * writing 0xF at bit 4. + * + * The MDR (message data register) format is the following: + * 1. [31:0]: Read/Write Data + * + * Data being read from this register is only available after + * writing the appropriate control message to the MCR + * register. + * + * Data being written to this register must be written before + * writing the appropriate control message to the MCR + * register. + */ + + int result; + + /* Construct control message */ + u32 const message = + (LNC_MESSAGE_READ_OPCODE << 24) + | (LNC_BUNIT_PORT << 16) + | (offset << 8) + | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4); + + dev_dbg(&pdev->dev, "Offset for 'get' LNC MSG is %x\n", offset); + + if (addr == 0) { + WARN_ON(1); + return -EINVAL; + } + + /* + * We synchronize access to the Lincroft MCR and MDR registers + * until BOTH the command is issued through the MCR register + * and the corresponding data is read from the MDR register. + * Otherwise a race condition would exist between accesses to + * both registers. + */ + + mutex_lock(&lnc_reg_mutex); + + /* Send the control message */ + result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message); + + dev_dbg(&pdev->dev, "Result from send ctl register is %x\n", result); + + if (!result) { + result = pci_read_config_dword(pdev, LNC_MDR_OFFSET, + (u32 *)addr); + dev_dbg(&pdev->dev, + "Result from read data register is %x\n", result); + + dev_dbg(&pdev->dev, + "Value read from data register is %lx\n", + (unsigned long)*addr); + } + + mutex_unlock(&lnc_reg_mutex); + + return result; +} + +static int set_rar_address(struct pci_dev *pdev, + int offset, + dma_addr_t addr) +{ + /* + * Data being written to this register must be written before + * writing the appropriate control message to the MCR + * register. + * @note See rar_get_address() for a description of the + * message bus interface being used here. + */ + + int result = 0; + + /* Construct control message */ + u32 const message = (LNC_MESSAGE_WRITE_OPCODE << 24) + | (LNC_BUNIT_PORT << 16) + | (offset << 8) + | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4); + + if (addr == 0) { + WARN_ON(1); + return -EINVAL; + } + + dev_dbg(&pdev->dev, "Offset for 'set' LNC MSG is %x\n", offset); + + /* + * We synchronize access to the Lincroft MCR and MDR registers + * until BOTH the command is issued through the MCR register + * and the corresponding data is read from the MDR register. + * Otherwise a race condition would exist between accesses to + * both registers. + */ + + mutex_lock(&lnc_reg_mutex); + + /* Send the control message */ + result = pci_write_config_dword(pdev, LNC_MDR_OFFSET, addr); + + dev_dbg(&pdev->dev, "Result from write data register is %x\n", result); + + if (!result) { + dev_dbg(&pdev->dev, + "Value written to data register is %lx\n", + (unsigned long)addr); + + result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message); + + dev_dbg(&pdev->dev, "Result from send ctl register is %x\n", + result); + } + + mutex_unlock(&lnc_reg_mutex); + + return result; +} + +/* +* Initialize RAR parameters, such as bus addresses, etc. +*/ +static int init_rar_params(struct pci_dev *pdev) +{ + unsigned int i; + int result = 0; + + /* Retrieve RAR start and end bus addresses. + * Access the RAR registers through the Lincroft Message Bus + * Interface on PCI device: 00:00.0 Host bridge. + */ + + for (i = 0; i < MRST_NUM_RAR; ++i) { + struct RAR_offsets const *offset = + &my_rar_device.rar_offsets[i]; + struct RAR_address_range *addr = &my_rar_device.rar_addr[i]; + + if ((retrieve_rar_addr(pdev, offset->low, &addr->low) != 0) + || (retrieve_rar_addr(pdev, offset->high, &addr->high) != 0)) { + result = -1; + break; + } + + /* + * Only the upper 22 bits of the RAR addresses are + * stored in their corresponding RAR registers so we + * must set the lower 10 bits accordingly. + + * The low address has its lower 10 bits cleared, and + * the high address has all its lower 10 bits set, + * e.g.: + * low = 0x2ffffc00 + */ + + addr->low &= (dma_addr_t)0xfffffc00u; + + /* + * Set bits 9:0 on uppser address if bits 31:10 are non + * zero; otherwize clear all bits + */ + + if ((addr->high & 0xfffffc00u) == 0) + addr->high = 0; + else + addr->high |= 0x3ffu; + } + /* Done accessing the device. */ + + if (result == 0) { + int z; + for (z = 0; z != MRST_NUM_RAR; ++z) { + /* + * "BRAR" refers to the RAR registers in the + * Lincroft B-unit. + */ + dev_info(&pdev->dev, "BRAR[%u] bus address range = " + "[%lx, %lx]\n", z, + (unsigned long)my_rar_device.rar_addr[z].low, + (unsigned long)my_rar_device.rar_addr[z].high); + } + } + + return result; +} + +/* + * The rar_get_address function is used by other device drivers + * to obtain RAR address information on a RAR. It takes three + * parameters: + * + * int rar_index + * The rar_index is an index to the rar for which you wish to retrieve + * the address information. + * Values can be 0,1, or 2. + * + * The function returns a 0 upon success or a -1 if there is no RAR + * facility on this system. + */ +int rar_get_address(int rar_index, + dma_addr_t *start_address, + dma_addr_t *end_address) +{ + int result = -ENODEV; + + if (my_rar_device.registered) { + if (start_address == 0 || end_address == 0 + || rar_index >= MRST_NUM_RAR || rar_index < 0) { + result = -EINVAL; + } else { + *start_address = + my_rar_device.rar_addr[rar_index].low; + *end_address = + my_rar_device.rar_addr[rar_index].high; + + result = 0; + } + } + + return result; +} +EXPORT_SYMBOL(rar_get_address); + +/* + * The rar_lock function is ued by other device drivers to lock an RAR. + * once an RAR is locked, it stays locked until the next system reboot. + * The function takes one parameter: + * + * int rar_index + * The rar_index is an index to the rar that you want to lock. + * Values can be 0,1, or 2. + * + * The function returns a 0 upon success or a -1 if there is no RAR + * facility on this system. + */ +int rar_lock(int rar_index) +{ + int result = -ENODEV; + + if (rar_index >= MRST_NUM_RAR || rar_index < 0) { + result = -EINVAL; + return result; + } + + dev_dbg(&my_rar_device.rar_dev->dev, "rar_lock mutex locking\n"); + mutex_lock(&rar_mutex); + + if (my_rar_device.registered) { + + dma_addr_t low = my_rar_device.rar_addr[rar_index].low & + 0xfffffc00u; + + dma_addr_t high = my_rar_device.rar_addr[rar_index].high & + 0xfffffc00u; + + /* + * Only allow I/O from the graphics and Langwell; + * Not from the x96 processor + */ + if (rar_index == (int)RAR_TYPE_VIDEO) { + low |= 0x00000009; + high |= 0x00000015; + } + + else if (rar_index == (int)RAR_TYPE_AUDIO) { + /* Only allow I/O from Langwell; nothing from x86 */ + low |= 0x00000008; + high |= 0x00000018; + } + + else + /* Read-only from all agents */ + high |= 0x00000018; + + /* + * Now program the register using the Lincroft message + * bus interface. + */ + result = set_rar_address(my_rar_device.rar_dev, + my_rar_device.rar_offsets[rar_index].low, + low); + + if (result == 0) + result = set_rar_address( + my_rar_device.rar_dev, + my_rar_device.rar_offsets[rar_index].high, + high); + } + + dev_dbg(&my_rar_device.rar_dev->dev, "rar_lock mutex unlocking\n"); + mutex_unlock(&rar_mutex); + return result; +} +EXPORT_SYMBOL(rar_lock); + +/* The register_rar function is to used by other device drivers + * to ensure that this driver is ready. As we cannot be sure of + * the compile/execute order of dirvers in ther kernel, it is + * best to give this driver a callback function to call when + * it is ready to give out addresses. The callback function + * would have those steps that continue the initialization of + * a driver that do require a valid RAR address. One of those + * steps would be to call rar_get_address() + * This function return 0 on success an -1 on failure. +*/ +int register_rar(int (*callback)(void *yourparameter), void *yourparameter) +{ + + int result = -ENODEV; + + if (callback == NULL) + return -EINVAL; + + mutex_lock(&rar_mutex); + + if (my_rar_device.registered) { + + mutex_unlock(&rar_mutex); + /* + * if the driver already registered, then we can simply + * call the callback right now + */ + + return (*callback)(yourparameter); + } + + if (num_clients < MRST_NUM_RAR) { + + clients[num_clients].client_callback = callback; + clients[num_clients].customer_data = yourparameter; + num_clients += 1; + result = 0; + } + + mutex_unlock(&rar_mutex); + return result; + +} +EXPORT_SYMBOL(register_rar); + +/* Suspend - returns -ENOSYS */ +static int rar_suspend(struct pci_dev *dev, pm_message_t state) +{ + return -ENOSYS; +} + +static int rar_resume(struct pci_dev *dev) +{ + return -ENOSYS; +} + +/* + * This function registers the driver with the device subsystem ( + * either PCI, USB, etc). + * Function that is activaed on the succesful probe of the RAR device + * (Moorestown host controller). + */ +static int rar_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int error; + int counter; + + dev_dbg(&dev->dev, "PCI probe starting\n"); + + /* enable the device */ + error = pci_enable_device(dev); + if (error) { + dev_err(&dev->dev, + "Error enabling RAR register PCI device\n"); + goto end_function; + } + + /* we have only one device; fill in the rar_device structure */ + my_rar_device.rar_dev = dev; + + /* + * Initialize the RAR parameters, which have to be retrieved + * via the message bus interface. + */ + error = init_rar_params(dev); + if (error) { + pci_disable_device(dev); + + dev_err(&dev->dev, + "Error retrieving RAR addresses\n"); + + goto end_function; + } + + dev_dbg(&dev->dev, "PCI probe locking\n"); + mutex_lock(&rar_mutex); + my_rar_device.registered = 1; + + /* now call anyone who has registered (using callbacks) */ + for (counter = 0; counter < num_clients; counter += 1) { + if (clients[counter].client_callback) { + error = (*clients[counter].client_callback)( + clients[counter].customer_data); + /* set callback to NULL to indicate it has been done */ + clients[counter].client_callback = NULL; + dev_dbg(&my_rar_device.rar_dev->dev, + "Callback called for %d\n", + counter); + } + } + + dev_dbg(&dev->dev, "PCI probe unlocking\n"); + mutex_unlock(&rar_mutex); + +end_function: + + return error; +} + +const struct pci_device_id rar_pci_id_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_RAR_DEVICE_ID) }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl); + +const struct pci_device_id *my_id_table = rar_pci_id_tbl; + +/* field for registering driver to PCI device */ +static struct pci_driver rar_pci_driver = { + .name = "rar_register_driver", + .id_table = rar_pci_id_tbl, + .probe = rar_probe, + .suspend = rar_suspend, + .resume = rar_resume +}; + +static int __init rar_init_handler(void) +{ + return pci_register_driver(&rar_pci_driver); +} + +static void __exit rar_exit_handler(void) +{ + pci_unregister_driver(&rar_pci_driver); +} + +module_init(rar_init_handler); +module_exit(rar_exit_handler); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Intel Restricted Access Region Register Driver"); diff --git a/drivers/staging/rar_register/rar_register.h b/drivers/staging/rar_register/rar_register.h new file mode 100644 index 00000000000..29ade0f361d --- /dev/null +++ b/drivers/staging/rar_register/rar_register.h @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General + * Public License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + * The full GNU General Public License is included in this + * distribution in the file called COPYING. + */ + + +#ifndef _RAR_REGISTER_H +#define _RAR_REGISTER_H + +# include <linux/types.h> + +/* following are used both in drivers as well as user space apps */ +enum RAR_type { + RAR_TYPE_VIDEO = 0, + RAR_TYPE_AUDIO, + RAR_TYPE_IMAGE, + RAR_TYPE_DATA +}; + +#ifdef __KERNEL__ + +/* PCI device id for controller */ +#define PCI_RAR_DEVICE_ID 0x4110 + +/* The register_rar function is to used by other device drivers + * to ensure that this driver is ready. As we cannot be sure of + * the compile/execute order of dirvers in ther kernel, it is + * best to give this driver a callback function to call when + * it is ready to give out addresses. The callback function + * would have those steps that continue the initialization of + * a driver that do require a valid RAR address. One of those + * steps would be to call get_rar_address() + * This function return 0 on success an -1 on failure. + */ +int register_rar(int (*callback)(void *yourparameter), void *yourparameter); + +/* The get_rar_address function is used by other device drivers + * to obtain RAR address information on a RAR. It takes two + * parameter: + * + * int rar_index + * The rar_index is an index to the rar for which you wish to retrieve + * the address information. + * Values can be 0,1, or 2. + * + * struct RAR_address_struct is a pointer to a place to which the function + * can return the address structure for the RAR. + * + * The function returns a 0 upon success or a -1 if there is no RAR + * facility on this system. + */ +int rar_get_address(int rar_index, + dma_addr_t *start_address, + dma_addr_t *end_address); + +/* The lock_rar function is ued by other device drivers to lock an RAR. + * once an RAR is locked, it stays locked until the next system reboot. + * The function takes one parameter: + * + * int rar_index + * The rar_index is an index to the rar that you want to lock. + * Values can be 0,1, or 2. + * + * The function returns a 0 upon success or a -1 if there is no RAR + * facility on this system. + */ +int rar_lock(int rar_index); + +#endif /* __KERNEL__ */ +#endif /* _RAR_REGISTER_H */ |