diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-19 17:48:32 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-19 17:48:32 -0700 |
commit | fb20871a54961b82d35303b43452928186c1361d (patch) | |
tree | 1beeb39e45eda1c8b5893090904b583fceeb07ef /drivers/staging/rt2860/common/rtmp_init.c | |
parent | bee89ab228e6f51c4ddd3481b9bd491859a8ee7b (diff) | |
parent | c7a5d70796379e3d51d0c652fbe1634b81d3bbd5 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (342 commits)
Staging: comedi: fix build errors
Staging: udlfb: update to version 0.2.3
Staging: udlfb: fix some sparse warnings.
Staging: udlfb: clean up checkpatch warnings in udlfb.c
Staging: udlfb: clean up checkpatch warnings in udlfb.h
Staging: udlfb: add udlfb driver to build
Staging: add udlfb driver
Staging: pata_rdc: remove pointless comments
Staging: pata_rdc: remove DRIVER macros
Staging: pata_rdc: remove dbgprintf macro
Staging: pata_rdc: remove broken flag
Staging: pata_rdc: fix build warnings
Staging: pata_rdc: use PCI_DEVICE
Staging: pata_rdc: remove function prototypes
Staging: pata_rdc: coding style fixes
Staging: pata_rdc: convert code to work in 2.6.29
Staging: pata_rdc: add driver to the build system
Staging: add pata_rdc driver
Staging: remove obsolete serqt_usb driver
Staging: serqt_usb2 add the driver to the build
...
Diffstat (limited to 'drivers/staging/rt2860/common/rtmp_init.c')
-rw-r--r-- | drivers/staging/rt2860/common/rtmp_init.c | 1253 |
1 files changed, 860 insertions, 393 deletions
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index 8a00cee3ee9..004f53023b0 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -38,8 +38,18 @@ Jan Lee 2006-09-15 RT2860. Change for 802.11n , EEPROM, Led, BA, HT. */ #include "../rt_config.h" -#include "firmware.h" +#ifndef RT30xx +#ifdef RT2860 +#include "firmware.h" #include <linux/bitrev.h> +#endif +#ifdef RT2870 +#include "../../rt2870/common/firmware.h" +#endif +#endif +#ifdef RT30xx +#include "../../rt3070/firmware.h" +#endif UCHAR BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80}; ULONG BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008, @@ -90,6 +100,22 @@ const unsigned short ccitt_16Table[] = { #define ByteCRC16(v, crc) \ (unsigned short)((crc << 8) ^ ccitt_16Table[((crc >> 8) ^ (v)) & 255]) +#ifdef RT2870 +unsigned char BitReverse(unsigned char x) +{ + int i; + unsigned char Temp=0; + for(i=0; ; i++) + { + if(x & 0x80) Temp |= 0x80; + if(i==7) break; + x <<= 1; + Temp >>= 1; + } + return Temp; +} +#endif + // // BBP register initialization set // @@ -114,6 +140,38 @@ REG_PAIR BBPRegTable[] = { // // RF register initialization set // +#ifdef RT2870 +REG_PAIR RT30xx_RFRegTable[] = { + {RF_R04, 0x40}, + {RF_R05, 0x03}, + {RF_R06, 0x02}, + {RF_R07, 0x70}, + {RF_R09, 0x0F}, +#ifndef RT30xx + {RF_R10, 0x71}, +#endif +#ifdef RT30xx + {RF_R10, 0x41}, +#endif + {RF_R11, 0x21}, + {RF_R12, 0x7B}, + {RF_R14, 0x90}, + {RF_R15, 0x58}, + {RF_R16, 0xB3}, + {RF_R17, 0x92}, + {RF_R18, 0x2C}, + {RF_R19, 0x02}, + {RF_R20, 0xBA}, + {RF_R21, 0xDB}, + {RF_R24, 0x16}, + {RF_R25, 0x01}, +#ifndef RT30xx + {RF_R27, 0x03}, +#endif + {RF_R29, 0x1F}, +}; +#define NUM_RF_REG_PARMS (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR)) +#endif // RT2870 // // // ASIC register initialization sets @@ -146,10 +204,18 @@ RTMP_REG_PAIR MACRegTable[] = { {AUTO_RSP_CFG, 0x00000013}, // Initial Auto_Responder, because QA will turn off Auto-Responder {CCK_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. {OFDM_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. +//PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA) +#ifdef RT2870 + {PBF_CFG, 0xf40006}, // Only enable Queue 2 + {MM40_PROT_CFG, 0x3F44084}, // Initial Auto_Responder, because QA will turn off Auto-Responder + {WPDMA_GLO_CFG, 0x00000030}, +#endif // RT2870 // {GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS {GF40_PROT_CFG, 0x03F44084}, {MM20_PROT_CFG, 0x01744004}, +#ifdef RT2860 {MM40_PROT_CFG, 0x03F54084}, +#endif {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f*/ /*0x000024bf*/}, //Extension channel backoff. {TX_RTS_CFG, 0x00092b20}, {EXP_ACK_TIME, 0x002400ca}, // default value @@ -163,20 +229,22 @@ RTMP_REG_PAIR MACRegTable[] = { {PWR_PIN_CFG, 0x00000003}, // patch for 2880-E }; - -#ifdef CONFIG_STA_SUPPORT RTMP_REG_PAIR STAMACRegTable[] = { {WMM_AIFSN_CFG, 0x00002273}, {WMM_CWMIN_CFG, 0x00002344}, {WMM_CWMAX_CFG, 0x000034aa}, }; -#endif // CONFIG_STA_SUPPORT // #define NUM_MAC_REG_PARMS (sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR)) -#ifdef CONFIG_STA_SUPPORT #define NUM_STA_MAC_REG_PARMS (sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR)) -#endif // CONFIG_STA_SUPPORT // +#ifdef RT2870 +// +// RT2870 Firmware Spec only used 1 oct for version expression +// +#define FIRMWARE_MINOR_VERSION 7 + +#endif // RT2870 // // New 8k byte firmware size for RT3071/RT3072 #define FIRMWAREIMAGE_MAX_LENGTH 0x2000 @@ -186,7 +254,9 @@ RTMP_REG_PAIR STAMACRegTable[] = { #define FIRMWAREIMAGEV1_LENGTH 0x1000 #define FIRMWAREIMAGEV2_LENGTH 0x1000 +#ifdef RT2860 #define FIRMWARE_MINOR_VERSION 2 +#endif /* @@ -244,7 +314,9 @@ NDIS_STATUS RTMPAllocAdapterBlock( // Init spin locks NdisAllocateSpinLock(&pAd->MgmtRingLock); +#ifdef RT2860 NdisAllocateSpinLock(&pAd->RxRingLock); +#endif for (index =0 ; index < NUM_OF_TX_RING; index++) { @@ -974,67 +1046,6 @@ VOID RTMPReadChannelPwr( // 4. Print and Debug choffset = 14 + 12 + 16 + 7; - - -#if 0 - // Init the 802.11j channel number for TX channel power - // 0. 20MHz - for (i = 0; i < 3; i++) - { - pAd->TxPower11J[i].Channel = 8 + i * 4; - pAd->TxPower11J[i].BW = BW_20; - } - - for (i = 0; i < 4; i++) - { - pAd->TxPower11J[i + 3].Channel = 34 + i * 4; - pAd->TxPower11J[i + 3].BW = BW_20; - } - - for (i = 0; i < 4; i++) - { - pAd->TxPower11J[i + 7].Channel = 184 + i * 4; - pAd->TxPower11J[i + 7].BW = BW_20; - } - - // 0. 10MHz - for (i = 0; i < 2; i++) - { - pAd->TxPower11J[i + 11].Channel = 7 + i; - pAd->TxPower11J[i + 11].BW = BW_10; - } - pAd->TxPower11J[13].Channel = 11; - pAd->TxPower11J[13].BW = BW_10; - - for (i = 0; i < 3; i++) - { - pAd->TxPower11J[i + 14].Channel = 183 + i; - pAd->TxPower11J[i + 14].BW= BW_10; - } - - for (i = 0; i < 3; i++) - { - pAd->TxPower11J[i + 17].Channel = 187 + i; - pAd->TxPower11J[i + 17].BW = BW_10; - } - for (i = 0; i < 10; i++) - { - Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX_PWR_OFFSET + i * 2); - Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX2_PWR_OFFSET + i * 2); - - if ((Power.field.Byte0 < 36) && (Power.field.Byte0 > -6)) - pAd->TxPower11J[i * 2].Power = Power.field.Byte0; - - if ((Power.field.Byte1 < 36) && (Power.field.Byte1 > -6)) - pAd->TxPower11J[i * 2 + 1].Power = Power.field.Byte1; - - if ((Power2.field.Byte0 < 36) && (Power2.field.Byte0 > -6)) - pAd->TxPower11J[i * 2].Power2 = Power2.field.Byte0; - - if ((Power2.field.Byte1 < 36) && (Power2.field.Byte1 > -6)) - pAd->TxPower11J[i * 2 + 1].Power2 = Power2.field.Byte1; - } -#endif } /* @@ -1071,6 +1082,425 @@ NDIS_STATUS NICReadRegParameters( } +#ifdef RT2870 +/* + ======================================================================== + + Routine Description: + For RF filter calibration purpose + + Arguments: + pAd Pointer to our adapter + + Return Value: + None + + IRQL = PASSIVE_LEVEL + + ======================================================================== +*/ +#ifndef RT30xx +VOID RTUSBFilterCalibration( + IN PRTMP_ADAPTER pAd) +{ + UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue; + UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0; + UCHAR RF_R24_Value = 0; + + // Give bbp filter initial value + pAd->Mlme.CaliBW20RfR24 = 0x16; + pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40 + + do + { + if (loop == 1) //BandWidth = 40 MHz + { + // Write 0x27 to RF_R24 to program filter + RF_R24_Value = 0x27; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + FilterTarget = 0x19; + + // when calibrate BW40, BBP mask must set to BW40. + RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + BBPValue|= (0x10); + RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue); + } + else //BandWidth = 20 MHz + { + // Write 0x07 to RF_R24 to program filter + RF_R24_Value = 0x07; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + FilterTarget = 0x16; + } + + // Write 0x01 to RF_R22 to enable baseband loopback mode + RT30xxReadRFRegister(pAd, RF_R22, &value); + value |= 0x01; + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // Write 0x00 to BBP_R24 to set power & frequency of passband test tone + RTUSBWriteBBPRegister(pAd, BBP_R24, 0); + + do + { + // Write 0x90 to BBP_R25 to transmit test tone + RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90); + + RTMPusecDelay(1000); + // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] + RTUSBReadBBPRegister(pAd, BBP_R55, &value); + R55x = value & 0xFF; + + } while ((ReTry++ < 100) && (R55x == 0)); + + // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone + RTUSBWriteBBPRegister(pAd, BBP_R24, 0x06); + + while(TRUE) + { + // Write 0x90 to BBP_R25 to transmit test tone + RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90); + + //We need to wait for calibration + RTMPusecDelay(1000); + RTUSBReadBBPRegister(pAd, BBP_R55, &value); + value &= 0xFF; + if ((R55x - value) < FilterTarget) + { + RF_R24_Value ++; + } + else if ((R55x - value) == FilterTarget) + { + RF_R24_Value ++; + count ++; + } + else + { + break; + } + + // prevent infinite loop cause driver hang. + if (loopcnt++ > 100) + { + DBGPRINT(RT_DEBUG_ERROR, ("RTUSBFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt)); + break; + } + + // Write RF_R24 to program filter + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + } + + if (count > 0) + { + RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0)); + } + + // Store for future usage + if (loopcnt < 100) + { + if (loop++ == 0) + { + //BandWidth = 20 MHz + pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value; + } + else + { + //BandWidth = 40 MHz + pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value; + break; + } + } + else + break; + + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + + // reset count + count = 0; + } while(TRUE); + + // + // Set back to initial state + // + RTUSBWriteBBPRegister(pAd, BBP_R24, 0); + + RT30xxReadRFRegister(pAd, RF_R22, &value); + value &= ~(0x01); + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // set BBP back to BW20 + RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue); + + DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24)); +} +#endif /* RT30xx */ +#ifdef RT30xx +VOID RTMPFilterCalibration( + IN PRTMP_ADAPTER pAd) +{ + UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue=0; + UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0; + UCHAR RF_R24_Value = 0; + + // Give bbp filter initial value + pAd->Mlme.CaliBW20RfR24 = 0x1F; + pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40 + + do + { + if (loop == 1) //BandWidth = 40 MHz + { + // Write 0x27 to RF_R24 to program filter + RF_R24_Value = 0x27; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + if (IS_RT3090(pAd)) + FilterTarget = 0x15; + else + FilterTarget = 0x19; + + // when calibrate BW40, BBP mask must set to BW40. + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + BBPValue|= (0x10); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); + + // set to BW40 + RT30xxReadRFRegister(pAd, RF_R31, &value); + value |= 0x20; + RT30xxWriteRFRegister(pAd, RF_R31, value); + } + else //BandWidth = 20 MHz + { + // Write 0x07 to RF_R24 to program filter + RF_R24_Value = 0x07; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + if (IS_RT3090(pAd)) + FilterTarget = 0x13; + else + FilterTarget = 0x16; + + // set to BW20 + RT30xxReadRFRegister(pAd, RF_R31, &value); + value &= (~0x20); + RT30xxWriteRFRegister(pAd, RF_R31, value); + } + + // Write 0x01 to RF_R22 to enable baseband loopback mode + RT30xxReadRFRegister(pAd, RF_R22, &value); + value |= 0x01; + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // Write 0x00 to BBP_R24 to set power & frequency of passband test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); + + do + { + // Write 0x90 to BBP_R25 to transmit test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); + + RTMPusecDelay(1000); + // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); + R55x = value & 0xFF; + + } while ((ReTry++ < 100) && (R55x == 0)); + + // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06); + + while(TRUE) + { + // Write 0x90 to BBP_R25 to transmit test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); + + //We need to wait for calibration + RTMPusecDelay(1000); + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); + value &= 0xFF; + if ((R55x - value) < FilterTarget) + { + RF_R24_Value ++; + } + else if ((R55x - value) == FilterTarget) + { + RF_R24_Value ++; + count ++; + } + else + { + break; + } + + // prevent infinite loop cause driver hang. + if (loopcnt++ > 100) + { + DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt)); + break; + } + + // Write RF_R24 to program filter + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + } + + if (count > 0) + { + RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0)); + } + + // Store for future usage + if (loopcnt < 100) + { + if (loop++ == 0) + { + //BandWidth = 20 MHz + pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value; + } + else + { + //BandWidth = 40 MHz + pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value; + break; + } + } + else + break; + + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + + // reset count + count = 0; + } while(TRUE); + + // + // Set back to initial state + // + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); + + RT30xxReadRFRegister(pAd, RF_R22, &value); + value &= ~(0x01); + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // set BBP back to BW20 + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); + + DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24)); +} +#endif /* RT30xx */ + +VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) +{ + INT i; + // Driver must read EEPROM to get RfIcType before initial RF registers + // Initialize RF register to default value +#ifndef RT30xx + if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) ||(pAd->RfIcType == RFIC_2020))) + { + // Init RF calibration + // Driver should toggle RF R30 bit7 before init RF registers + ULONG RfReg = 0; + RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); + RfReg |= 0x80; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + RTMPusecDelay(1000); + RfReg &= 0x7F; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + + // Initialize RF register to default value + for (i = 0; i < NUM_RF_REG_PARMS; i++) + { + RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); + } + + //For RF filter Calibration + RTUSBFilterCalibration(pAd); + } +#endif +#ifdef RT30xx + if (IS_RT3070(pAd) || IS_RT3071(pAd)) + { + // Init RF calibration + // Driver should toggle RF R30 bit7 before init RF registers + UINT32 RfReg = 0; + UINT32 data; + + RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); + RfReg |= 0x80; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + RTMPusecDelay(1000); + RfReg &= 0x7F; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + + // Initialize RF register to default value + for (i = 0; i < NUM_RF_REG_PARMS; i++) + { + RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); + } + + // add by johnli + if (IS_RT3070(pAd)) + { + // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate + RTUSBReadMACRegister(pAd, LDO_CFG0, &data); + data = ((data & 0xF0FFFFFF) | 0x0D000000); + RTUSBWriteMACRegister(pAd, LDO_CFG0, data); + } + else if (IS_RT3071(pAd)) + { + // Driver should set RF R6 bit6 on before init RF registers + RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg); + RfReg |= 0x40; + RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg); + + // init R31 + RT30xxWriteRFRegister(pAd, RF_R31, 0x14); + + // RT3071 version E has fixed this issue + if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) + { + // patch tx EVM issue temporarily + RTUSBReadMACRegister(pAd, LDO_CFG0, &data); + data = ((data & 0xE0FFFFFF) | 0x0D000000); + RTUSBWriteMACRegister(pAd, LDO_CFG0, data); + } + else + { + RTMP_IO_READ32(pAd, LDO_CFG0, &data); + data = ((data & 0xE0FFFFFF) | 0x01000000); + RTMP_IO_WRITE32(pAd, LDO_CFG0, data); + } + + // patch LNA_PE_G1 failed issue + RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data); + data &= ~(0x20); + RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data); + } + + //For RF filter Calibration + RTMPFilterCalibration(pAd); + + // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() + if ((pAd->MACVersion & 0xffff) < 0x0211) + RT30xxWriteRFRegister(pAd, RF_R27, 0x3); + + // set led open drain enable + RTUSBReadMACRegister(pAd, OPT_14, &data); + data |= 0x01; + RTUSBWriteMACRegister(pAd, OPT_14, data); + + if (IS_RT3071(pAd)) + { + // add by johnli, RF power sequence setup, load RF normal operation-mode setup + RT30xxLoadRFNormalModeSetup(pAd); + } + } +#endif +} +#endif // RT2870 // /* @@ -1245,11 +1675,25 @@ VOID NICReadEEPROMParameters( Antenna.word = pAd->EEPROMDefaultValue[0]; if (Antenna.word == 0xFFFF) { +#ifdef RT30xx + if(IS_RT3090(pAd)) + { + Antenna.word = 0; + Antenna.field.RfIcType = RFIC_3020; + Antenna.field.TxPath = 1; + Antenna.field.RxPath = 1; + } + else + { +#endif // RT30xx // Antenna.word = 0; Antenna.field.RfIcType = RFIC_2820; Antenna.field.TxPath = 1; Antenna.field.RxPath = 2; DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word)); +#ifdef RT30xx + } +#endif // RT30xx // } // Choose the desired Tx&Rx stream. @@ -1277,12 +1721,10 @@ VOID NICReadEEPROMParameters( NicConfig2.word = pAd->EEPROMDefaultValue[1]; - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { +#ifndef RT30xx NicConfig2.word = 0; +#endif if ((NicConfig2.word & 0x00ff) == 0xff) { NicConfig2.word &= 0xff00; @@ -1293,7 +1735,6 @@ VOID NICReadEEPROMParameters( NicConfig2.word &= 0x00ff; } } -#endif // CONFIG_STA_SUPPORT // if (NicConfig2.field.DynamicTxAgcControl == 1) pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE; @@ -1314,13 +1755,11 @@ VOID NICReadEEPROMParameters( if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11A)) pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; -#ifdef DOT11_N_SUPPORT else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)) pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED; -#endif // DOT11_N_SUPPORT // } // Read TSSI reference and TSSI boundary for temperature compensation. This is ugly @@ -1411,9 +1850,7 @@ VOID NICReadEEPROMParameters( TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // } // @@ -1480,10 +1917,13 @@ VOID NICReadEEPROMParameters( RTMPReadTxPwrPerRate(pAd); -#ifdef SINGLE_SKU - //pAd->CommonCfg.DefineMaxTxPwr = RTMP_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR); - RT28xx_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR, pAd->CommonCfg.DefineMaxTxPwr); -#endif // SINGLE_SKU // +#ifdef RT30xx + if (IS_RT30xx(pAd)) + { + eFusePhysicalReadRegisters(pAd, EFUSE_TAG, 2, &value); + pAd->EFuseTag = (value & 0xff); + } +#endif // RT30xx // DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n")); } @@ -1509,10 +1949,8 @@ VOID NICReadEEPROMParameters( VOID NICInitAsicFromEEPROM( IN PRTMP_ADAPTER pAd) { -#ifdef CONFIG_STA_SUPPORT UINT32 data = 0; UCHAR BBPR1 = 0; -#endif // CONFIG_STA_SUPPORT // USHORT i; EEPROM_ANTENNA_STRUC Antenna; EEPROM_NIC_CONFIG2_STRUC NicConfig2; @@ -1531,16 +1969,49 @@ VOID NICInitAsicFromEEPROM( } } +#ifndef RT30xx Antenna.word = pAd->Antenna.word; +#endif +#ifdef RT30xx + Antenna.word = pAd->EEPROMDefaultValue[0]; + if (Antenna.word == 0xFFFF) + { + DBGPRINT(RT_DEBUG_ERROR, ("E2PROM error, hard code as 0x%04x\n", Antenna.word)); + BUG_ON(Antenna.word == 0xFFFF); + } +#endif pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath; pAd->RfIcType = (UCHAR) Antenna.field.RfIcType; +#ifdef RT30xx + DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath)); + + // Save the antenna for future use + pAd->Antenna.word = Antenna.word; +#endif NicConfig2.word = pAd->EEPROMDefaultValue[1]; +#ifdef RT30xx + { + if ((NicConfig2.word & 0x00ff) == 0xff) + { + NicConfig2.word &= 0xff00; + } + if ((NicConfig2.word >> 8) == 0xff) + { + NicConfig2.word &= 0x00ff; + } + } +#endif // Save the antenna for future use pAd->NicConfig2.word = NicConfig2.word; +#ifdef RT30xx + // set default antenna as main + if (pAd->RfIcType == RFIC_3020) + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); +#endif // // Send LED Setting to MCU. // @@ -1549,7 +2020,13 @@ VOID NICInitAsicFromEEPROM( pAd->LedCntl.word = 0x01; pAd->Led1 = 0x5555; pAd->Led2 = 0x2221; +#ifdef RT2860 pAd->Led3 = 0xA9F8; +#endif + +#ifdef RT2870 + pAd->Led3 = 0x5627; +#endif // RT2870 // } AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8)); @@ -1558,8 +2035,6 @@ VOID NICInitAsicFromEEPROM( pAd->LedIndicatorStregth = 0xFF; RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, before link up -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // Read Hardware controlled Radio state enable bit if (NicConfig2.field.HardwareRadioControl == 1) @@ -1585,13 +2060,14 @@ VOID NICInitAsicFromEEPROM( else { RTMPSetLED(pAd, LED_RADIO_ON); +#ifdef RT2860 AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02); AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00); // 2-1. wait command ok. AsicCheckCommanOk(pAd, PowerWakeCID); +#endif } } -#endif // CONFIG_STA_SUPPORT // // Turn off patching for cardbus controller if (NicConfig2.field.CardbusAcceleration == 1) @@ -1624,8 +2100,6 @@ VOID NICInitAsicFromEEPROM( } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // Handle the difference when 1T RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1); @@ -1637,7 +2111,7 @@ VOID NICInitAsicFromEEPROM( DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio)); } -#endif // CONFIG_STA_SUPPORT // + DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word)); DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n")); } @@ -1666,8 +2140,10 @@ NDIS_STATUS NICInitializeAdapter( { NDIS_STATUS Status = NDIS_STATUS_SUCCESS; WPDMA_GLO_CFG_STRUC GloCfg; +#ifdef RT2860 UINT32 Value; DELAY_INT_CFG_STRUC IntCfg; +#endif ULONG i =0, j=0; AC_TXOP_CSR0_STRUC csr0; @@ -1706,9 +2182,11 @@ retry: // asic simulation sequence put this ahead before loading firmware. // pbf hardware reset +#ifdef RT2860 RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); // 0x10000 for reset rx, 0x3f resets all 6 tx rings. RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f); RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00); +#endif // Initialze ASIC for TX & Rx operation if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS) @@ -1722,6 +2200,7 @@ retry: } +#ifdef RT2860 // Write AC_BK base address register Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa); RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value); @@ -1794,6 +2273,7 @@ retry: // Write RX_RING_CSR register Value = RX_RING_SIZE; RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value); +#endif /* RT2860 */ // WMM parameter @@ -1812,6 +2292,7 @@ retry: RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word); +#ifdef RT2860 // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: i = 0; do @@ -1830,6 +2311,7 @@ retry: IntCfg.word = 0; RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word); +#endif // reset action @@ -1865,36 +2347,133 @@ NDIS_STATUS NICInitializeAsic( ULONG Index = 0; UCHAR R0 = 0xff; UINT32 MacCsr12 = 0, Counter = 0; +#ifdef RT2870 + UINT32 MacCsr0 = 0; + NTSTATUS Status; + UCHAR Value = 0xff; +#endif // RT2870 // +#ifdef RT30xx + UINT32 eFuseCtrl; +#endif // RT30xx // USHORT KeyIdx; INT i,apidx; DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n")); +#ifdef RT2860 if (bHardReset == TRUE) { RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3); } else RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1); +#endif +#ifdef RT2870 + // + // Make sure MAC gets ready after NICLoadFirmware(). + // + Index = 0; + + //To avoid hang-on issue when interface up in kernel 2.4, + //we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly. + do + { + RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0); + + if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF)) + break; + + RTMPusecDelay(10); + } while (Index++ < 100); + + pAd->MACVersion = MacCsr0; + DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion)); + // turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue. + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12); + MacCsr12 &= (~0x2000); + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12); + + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3); + RTMP_IO_WRITE32(pAd, USB_DMA_CFG, 0x0); + Status = RTUSBVenderReset(pAd); +#endif RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0); + // Initialize MAC register to default value +#ifdef RT2860 for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++) { RTMP_IO_WRITE32(pAd, MACRegTable[Index].Register, MACRegTable[Index].Value); } +#endif +#ifdef RT2870 + for(Index=0; Index<NUM_MAC_REG_PARMS; Index++) + { +#ifdef RT3070 + if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd))) + { + MACRegTable[Index].Value = 0x00000400; + } +#endif // RT3070 // + RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value); + } + +#ifndef RT30xx + if(IS_RT3070(pAd)) + { + // According to Frank Hsu (from Gary Tsao) + RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400); + + // Initialize RT3070 serial MAC registers which is different from RT2870 serial + RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0); + RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0); + } +#endif +#endif // RT2870 // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++) { +#ifdef RT2860 RTMP_IO_WRITE32(pAd, STAMACRegTable[Index].Register, STAMACRegTable[Index].Value); +#endif +#ifdef RT2870 + RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value); +#endif } } -#endif // CONFIG_STA_SUPPORT // +#ifdef RT30xx + // Initialize RT3070 serial MAc registers which is different from RT2870 serial + if (IS_RT3090(pAd)) + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); + + // RT3071 version E has fixed this issue + if ((pAd->MACVersion & 0xffff) < 0x0211) + { + if (pAd->NicConfig2.field.DACTestBit == 1) + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically + } + else + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); // To fix throughput drop drastically + } + } + else + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0); + } + } + else if (IS_RT3070(pAd)) + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically + } +#endif // RT30xx // // // Before program BBP, we need to wait BBP/RF get wake up. @@ -1935,11 +2514,69 @@ NDIS_STATUS NICInitializeAsic( RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value); } +#ifndef RT30xx // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. if ((pAd->MACVersion&0xffff) != 0x0101) RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19); +#ifdef RT2870 + //write RT3070 BBP wchich different with 2870 after write RT2870 BBP + if (IS_RT3070(pAd)) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05); + } +#endif // RT2870 // +#endif +#ifdef RT30xx + // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. + // RT3090 should not program BBP R84 to 0x19, otherwise TX will block. + if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd))) + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19); + +// add by johnli, RF power sequence setup + if (IS_RT30xx(pAd)) + { //update for RT3070/71/72/90/91/92. + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33); + } + + if (IS_RT3090(pAd)) + { + UCHAR bbpreg=0; + + // enable DC filter + if ((pAd->MACVersion & 0xffff) >= 0x0211) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0); + } + // improve power consumption + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg); + if (pAd->Antenna.field.TxPath == 1) + { + // turn off tx DAC_1 + bbpreg = (bbpreg | 0x20); + } + + if (pAd->Antenna.field.RxPath == 1) + { + // turn off tx ADC_1 + bbpreg &= (~0x2); + } + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg); + + // improve power consumption in RT3071 Ver.E + if ((pAd->MACVersion & 0xffff) >= 0x0211) + { + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg); + bbpreg &= (~0x3); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg); + } + } +#endif if (pAd->MACVersion == 0x28600100) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); @@ -1956,10 +2593,20 @@ NDIS_STATUS NICInitializeAsic( RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, csr); } +#ifdef RT2870 +{ + UCHAR MAC_Value[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0,0}; + + //Initialize WCID table + Value = 0xff; + for(Index =0 ;Index < 254;Index++) + { + RTUSBMultiWrite(pAd, (USHORT)(MAC_WCID_BASE + Index * 8), MAC_Value, 8); + } +} +#endif // RT2870 // // Add radio off control -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pAd->StaCfg.bRadio == FALSE) { @@ -1968,7 +2615,6 @@ NDIS_STATUS NICInitializeAsic( DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n")); } } -#endif // CONFIG_STA_SUPPORT // // Clear raw counters RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter); @@ -2006,21 +2652,48 @@ NDIS_STATUS NICInitializeAsic( RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[apidx] + i, 0x00); } } +#ifdef RT2870 + AsicDisableSync(pAd); + // Clear raw counters + RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter); + RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter); + RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter); + RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter); + RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter); + RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter); + // Default PCI clock cycle per ms is different as default setting, which is based on PCI. + RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter); + Counter&=0xffffff00; + Counter|=0x000001e; + RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter); +#endif // RT2870 // +#ifdef RT30xx + pAd->bUseEfuse=FALSE; + RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrl); + pAd->bUseEfuse = ( (eFuseCtrl & 0x80000000) == 0x80000000) ? 1 : 0; + if(pAd->bUseEfuse) + { + DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse\n")); + } + else + { + DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n")); + + } +#endif // RT30xx // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT. if ((pAd->MACVersion&0xffff) != 0x0101) RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f); } -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n")); return NDIS_STATUS_SUCCESS; } +#ifdef RT2860 VOID NICRestoreBBPValue( IN PRTMP_ADAPTER pAd) { @@ -2144,6 +2817,7 @@ VOID NICRestoreBBPValue( DBGPRINT(RT_DEBUG_TRACE, ("<--- NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n")); } +#endif /* RT2860 */ /* ======================================================================== @@ -2214,12 +2888,6 @@ VOID NICUpdateFifoStaCounters( CHAR reTry; UCHAR succMCS; -#ifdef RALINK_ATE - /* Nothing to do in ATE mode */ - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - do { RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word); @@ -2244,10 +2912,8 @@ VOID NICUpdateFifoStaCounters( pEntry->DebugFIFOCount++; -#ifdef DOT11_N_SUPPORT if (StaFifo.field.TxBF) // 3*3 pEntry->TxBFCount++; -#endif // DOT11_N_SUPPORT // #ifdef UAPSD_AP_SUPPORT UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess); @@ -2261,23 +2927,15 @@ VOID NICUpdateFifoStaCounters( if (pEntry->FIFOCount >= 1) { DBGPRINT(RT_DEBUG_TRACE, ("#")); -#if 0 - SendRefreshBAR(pAd, pEntry); pEntry->NoBADataCountDown = 64; -#else -#ifdef DOT11_N_SUPPORT - pEntry->NoBADataCountDown = 64; -#endif // DOT11_N_SUPPORT // if(pEntry->PsMode == PWR_ACTIVE) { -#ifdef DOT11_N_SUPPORT int tid; for (tid=0; tid<NUM_OF_TID; tid++) { BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, FALSE); } -#endif // DOT11_N_SUPPORT // // Update the continuous transmission counter except PS mode pEntry->ContinueTxFailCnt++; @@ -2289,14 +2947,10 @@ VOID NICUpdateFifoStaCounters( pEntry->FIFOCount = 0; pEntry->ContinueTxFailCnt = 0; } -#endif - //pEntry->FIFOCount = 0; } - //pEntry->bSendBAR = TRUE; } else { -#ifdef DOT11_N_SUPPORT if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0)) { pEntry->NoBADataCountDown--; @@ -2305,7 +2959,7 @@ VOID NICUpdateFifoStaCounters( DBGPRINT(RT_DEBUG_TRACE, ("@\n")); } } -#endif // DOT11_N_SUPPORT // + pEntry->FIFOCount = 0; pEntry->OneSecTxNoRetryOkCount++; // update NoDataIdleCount when sucessful send packet to STA. @@ -2416,6 +3070,22 @@ VOID NICUpdateRawCounters( // Update RX Overflow counter pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount); +#ifdef RT2870 + if (pAd->RalinkCounters.RxCount != pAd->watchDogRxCnt) + { + pAd->watchDogRxCnt = pAd->RalinkCounters.RxCount; + pAd->watchDogRxOverFlowCnt = 0; + } + else + { + if (RxStaCnt2.field.RxFifoOverflowCount) + pAd->watchDogRxOverFlowCnt++; + else + pAd->watchDogRxOverFlowCnt = 0; + } +#endif // RT2870 // + + if (!pAd->bUpdateBcnCntDone) { // Update BEACON sent count @@ -2643,217 +3313,46 @@ VOID NICEraseFirmware( NDIS_STATUS NICLoadFirmware( IN PRTMP_ADAPTER pAd) { -#ifdef BIN_IN_FILE -#define NICLF_DEFAULT_USE() \ - flg_default_firm_use = TRUE; \ - printk("%s - Use default firmware!\n", __func__); - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - PUCHAR src; - struct file *srcf; - INT retval, orgfsuid, orgfsgid, i; - mm_segment_t orgfs; PUCHAR pFirmwareImage; - UINT FileLength = 0; - UINT32 MacReg; - ULONG Index; - ULONG firm; - BOOLEAN flg_default_firm_use = FALSE; - - - DBGPRINT(RT_DEBUG_TRACE, ("===> %s\n", __func__)); - - /* init */ - pFirmwareImage = NULL; - src = RTMP_FIRMWARE_FILE_NAME; - - /* save uid and gid used for filesystem access. - set user and group to 0 (root) */ - orgfsuid = current->fsuid; - orgfsgid = current->fsgid; - current->fsuid = current->fsgid = 0; - orgfs = get_fs(); - set_fs(KERNEL_DS); - - pAd->FirmwareVersion = (FIRMWARE_MAJOR_VERSION << 8) + \ - FIRMWARE_MINOR_VERSION; - - - /* allocate firmware buffer */ - pFirmwareImage = kmalloc(MAX_FIRMWARE_IMAGE_SIZE, MEM_ALLOC_FLAG); - if (pFirmwareImage == NULL) - { - /* allocate fail, use default firmware array in firmware.h */ - printk("%s - Allocate memory fail!\n", __func__); - NICLF_DEFAULT_USE(); - } - else - { - /* allocate ok! zero the firmware buffer */ - memset(pFirmwareImage, 0x00, MAX_FIRMWARE_IMAGE_SIZE); - } /* End of if */ - + ULONG FileLength, Index; + //ULONG firm; + UINT32 MacReg = 0; +#ifdef RT2870 + UINT32 Version = (pAd->MACVersion >> 16); +#endif // RT2870 // - /* if ok, read firmware file from *.bin file */ - if (flg_default_firm_use == FALSE) + pFirmwareImage = FirmwareImage; + FileLength = sizeof(FirmwareImage); +#ifdef RT2870 + // New 8k byte firmware size for RT3071/RT3072 + //printk("Usb Chip\n"); + if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH) + //The firmware image consists of two parts. One is the origianl and the other is the new. + //Use Second Part { - do - { - /* open the bin file */ - srcf = filp_open(src, O_RDONLY, 0); - - if (IS_ERR(srcf)) - { - printk("%s - Error %ld opening %s\n", - __func__, -PTR_ERR(srcf), src); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - - /* the object must have a read method */ - if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL)) - { - printk("%s - %s does not have a write method\n", __func__, src); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - - /* read the firmware from the file *.bin */ - FileLength = srcf->f_op->read(srcf, - pFirmwareImage, - MAX_FIRMWARE_IMAGE_SIZE, - &srcf->f_pos); - - if (FileLength != MAX_FIRMWARE_IMAGE_SIZE) - { - printk("%s: error file length (=%d) in RT2860AP.BIN\n", - __func__, FileLength); - NICLF_DEFAULT_USE(); - break; - } - else - { - PUCHAR ptr = pFirmwareImage; - USHORT crc = 0xffff; - - - /* calculate firmware CRC */ - for(i=0; i<(MAX_FIRMWARE_IMAGE_SIZE-2); i++, ptr++) - crc = ByteCRC16(bitrev8(*ptr), crc); - /* End of for */ - - if ((pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2] != \ - (UCHAR)bitrev8((UCHAR)(crc>>8))) || - (pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1] != \ - (UCHAR)bitrev8((UCHAR)crc))) - { - /* CRC fail */ - printk("%s: CRC = 0x%02x 0x%02x " - "error, should be 0x%02x 0x%02x\n", - __func__, - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2], - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1], - (UCHAR)(crc>>8), (UCHAR)(crc)); - NICLF_DEFAULT_USE(); - break; - } - else - { - /* firmware is ok */ - pAd->FirmwareVersion = \ - (pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4] << 8) + - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3]; - - /* check if firmware version of the file is too old */ - if ((pAd->FirmwareVersion) < \ - ((FIRMWARE_MAJOR_VERSION << 8) + - FIRMWARE_MINOR_VERSION)) - { - printk("%s: firmware version too old!\n", __func__); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - } /* End of if */ - - DBGPRINT(RT_DEBUG_TRACE, - ("NICLoadFirmware: CRC ok, ver=%d.%d\n", - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4], - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3])); - } /* End of if (FileLength == MAX_FIRMWARE_IMAGE_SIZE) */ - break; - } while(TRUE); - - /* close firmware file */ - if (IS_ERR(srcf)) - ; + if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070)) + { // Use Firmware V2. + //printk("KH:Use New Version,part2\n"); + pFirmwareImage = (PUCHAR)&FirmwareImage[FIRMWAREIMAGEV1_LENGTH]; + FileLength = FIRMWAREIMAGEV2_LENGTH; + } else { - retval = filp_close(srcf, NULL); - if (retval) - { - DBGPRINT(RT_DEBUG_ERROR, - ("--> Error %d closing %s\n", -retval, src)); - } /* End of if */ - } /* End of if */ - } /* End of if */ - - - /* write firmware to ASIC */ - if (flg_default_firm_use == TRUE) - { - /* use default fimeware, free allocated buffer */ - if (pFirmwareImage != NULL) - kfree(pFirmwareImage); - /* End of if */ - - /* use default *.bin array */ - pFirmwareImage = FirmwareImage; - FileLength = sizeof(FirmwareImage); - } /* End of if */ - - /* enable Host program ram write selection */ - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x10000); - - for(i=0; i<FileLength; i+=4) - { - firm = pFirmwareImage[i] + - (pFirmwareImage[i+3] << 24) + - (pFirmwareImage[i+2] << 16) + - (pFirmwareImage[i+1] << 8); - - RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, firm); - } /* End of for */ - - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00000); - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00001); - - /* initialize BBP R/W access agent */ - RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); - RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0); - - if (flg_default_firm_use == FALSE) + //printk("KH:Use New Version,part1\n"); + pFirmwareImage = FirmwareImage; + FileLength = FIRMWAREIMAGEV1_LENGTH; + } + } + else { - /* use file firmware, free allocated buffer */ - if (pFirmwareImage != NULL) - kfree(pFirmwareImage); - /* End of if */ - } /* End of if */ + DBGPRINT(RT_DEBUG_ERROR, ("KH: bin file should be 8KB.\n")); + Status = NDIS_STATUS_FAILURE; + } - set_fs(orgfs); - current->fsuid = orgfsuid; - current->fsgid = orgfsgid; -#else +#endif // RT2870 // - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - PUCHAR pFirmwareImage; - ULONG FileLength, Index; - //ULONG firm; - UINT32 MacReg = 0; - - pFirmwareImage = FirmwareImage; - FileLength = sizeof(FirmwareImage); RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength); -#endif /* check if MCU is ready */ Index = 0; @@ -2867,7 +3366,7 @@ NDIS_STATUS NICLoadFirmware( RTMPusecDelay(1000); } while (Index++ < 1000); - if (Index >= 1000) + if (Index > 1000) { Status = NDIS_STATUS_FAILURE; DBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware: MCU is not ready\n\n\n")); @@ -3118,6 +3617,31 @@ VOID UserCfgInit( // // part I. intialize common configuration // +#ifdef RT2870 + pAd->BulkOutReq = 0; + + pAd->BulkOutComplete = 0; + pAd->BulkOutCompleteOther = 0; + pAd->BulkOutCompleteCancel = 0; + pAd->BulkInReq = 0; + pAd->BulkInComplete = 0; + pAd->BulkInCompleteFail = 0; + + //pAd->QuickTimerP = 100; + //pAd->TurnAggrBulkInCount = 0; + pAd->bUsbTxBulkAggre = 0; + + // init as unsed value to ensure driver will set to MCU once. + pAd->LedIndicatorStregth = 0xFF; + + pAd->CommonCfg.MaxPktOneTxBulk = 2; + pAd->CommonCfg.TxBulkFactor = 1; + pAd->CommonCfg.RxBulkFactor =1; + + pAd->CommonCfg.TxPower = 100; //mW + + NdisZeroMemory(&pAd->CommonCfg.IOTestParm, sizeof(pAd->CommonCfg.IOTestParm)); +#endif // RT2870 // for(key_index=0; key_index<SHARE_KEY_NUM; key_index++) { @@ -3128,14 +3652,19 @@ VOID UserCfgInit( } } +#ifdef RT30xx + pAd->EepromAccess = FALSE; +#endif pAd->Antenna.word = 0; pAd->CommonCfg.BBPCurrentBW = BW_20; pAd->LedCntl.word = 0; +#ifdef RT2860 pAd->LedIndicatorStregth = 0; pAd->RLnkCtrlOffset = 0; pAd->HostLnkCtrlOffset = 0; pAd->CheckDmaBusyCount = 0; +#endif pAd->bAutoTxAgcA = FALSE; // Default is OFF pAd->bAutoTxAgcG = FALSE; // Default is OFF @@ -3176,23 +3705,11 @@ VOID UserCfgInit( NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI)); -#ifdef DOT11_N_SUPPORT NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability)); pAd->HTCEnable = FALSE; pAd->bBroadComHT = FALSE; pAd->CommonCfg.bRdg = FALSE; -#ifdef DOT11N_DRAFT3 - pAd->CommonCfg.Dot11OBssScanPassiveDwell = dot11OBSSScanPassiveDwell; // Unit : TU. 5~1000 - pAd->CommonCfg.Dot11OBssScanActiveDwell = dot11OBSSScanActiveDwell; // Unit : TU. 10~1000 - pAd->CommonCfg.Dot11BssWidthTriggerScanInt = dot11BSSWidthTriggerScanInterval; // Unit : Second - pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel = dot11OBSSScanPassiveTotalPerChannel; // Unit : TU. 200~10000 - pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel = dot11OBSSScanActiveTotalPerChannel; // Unit : TU. 20~10000 - pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor = dot11BSSWidthChannelTransactionDelayFactor; - pAd->CommonCfg.Dot11OBssScanActivityThre = dot11BSSScanActivityThreshold; // Unit : percentage - pAd->CommonCfg.Dot11BssWidthChanTranDelay = (pAd->CommonCfg.Dot11BssWidthTriggerScanInt * pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor); -#endif // DOT11N_DRAFT3 // - NdisZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo)); pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE; pAd->CommonCfg.BACapability.field.MpduDensity = 0; @@ -3213,7 +3730,6 @@ VOID UserCfgInit( pAd->CommonCfg.TxBASize = 7; pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word; -#endif // DOT11_N_SUPPORT // //pAd->CommonCfg.HTPhyMode.field.BW = BW_20; //pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO; @@ -3230,8 +3746,6 @@ VOID UserCfgInit( // // part II. intialize STA specific configuration // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT); RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST); @@ -3270,11 +3784,6 @@ VOID UserCfgInit( pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; } -#ifdef EXT_BUILD_CHANNEL_LIST - pAd->StaCfg.IEEE80211dClientMode = Rt802_11_D_None; -#endif // EXT_BUILD_CHANNEL_LIST // -#endif // CONFIG_STA_SUPPORT // - // global variables mXXXX used in MAC protocol state machines OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON); @@ -3284,21 +3793,12 @@ VOID UserCfgInit( pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; // default PHY mode OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); // CCK use LONG preamble -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // user desired power mode pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM; pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM; pAd->StaCfg.bWindowsACCAMEnable = FALSE; -#ifdef LEAP_SUPPORT - // CCX v1.0 releated init value - RTMPInitTimer(pAd, &pAd->StaCfg.LeapAuthTimer, GET_TIMER_FUNCTION(LeapAuthTimeout), pAd, FALSE); - pAd->StaCfg.LeapAuthMode = CISCO_AuthModeLEAPNone; - pAd->StaCfg.bCkipOn = FALSE; -#endif // LEAP_SUPPORT // - RTMPInitTimer(pAd, &pAd->StaCfg.StaQuickResponeForRateUpTimer, GET_TIMER_FUNCTION(StaQuickResponeForRateUpExec), pAd, FALSE); pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE; @@ -3326,17 +3826,11 @@ VOID UserCfgInit( NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1); sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME); RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE); -#ifdef WPA_SUPPLICANT_SUPPORT pAd->StaCfg.IEEE8021X = FALSE; pAd->StaCfg.IEEE8021x_required_keys = FALSE; pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE; -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE; -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // -#endif // WPA_SUPPLICANT_SUPPORT // - } -#endif // CONFIG_STA_SUPPORT // // Default for extra information is not valid pAd->ExtraInfo = EXTRA_INFO_CLEAR; @@ -3373,41 +3867,12 @@ VOID UserCfgInit( InitializeQueueHeader(&pAd->MacTab.McastPsQueue); NdisAllocateSpinLock(&pAd->MacTabLock); -#ifdef RALINK_ATE - NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO)); - pAd->ate.Mode = ATE_STOP; - pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */ - pAd->ate.TxLength = 1024; - pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns - pAd->ate.TxWI.PHYMODE = MODE_CCK; - pAd->ate.TxWI.MCS = 3; - pAd->ate.TxWI.BW = BW_20; - pAd->ate.Channel = 1; - pAd->ate.QID = QID_AC_BE; - pAd->ate.Addr1[0] = 0x00; - pAd->ate.Addr1[1] = 0x11; - pAd->ate.Addr1[2] = 0x22; - pAd->ate.Addr1[3] = 0xAA; - pAd->ate.Addr1[4] = 0xBB; - pAd->ate.Addr1[5] = 0xCC; - NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - pAd->ate.bRxFer = 0; - pAd->ate.bQATxStart = FALSE; - pAd->ate.bQARxStart = FALSE; - pAd->ate.bFWLoading = FALSE; -#ifdef RALINK_28xx_QA - //pAd->ate.Repeat = 0; - pAd->ate.TxStatus = 0; - pAd->ate.AtePid = THREAD_PID_INIT_VALUE; -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - - pAd->CommonCfg.bWiFiTest = FALSE; +#ifdef RT2860 pAd->bPCIclkOff = FALSE; RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); +#endif DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n")); } @@ -3509,6 +3974,9 @@ VOID RTMPInitTimer( pTimer->State = FALSE; pTimer->cookie = (ULONG) pData; +#ifdef RT2870 + pTimer->pAd = pAd; +#endif // RT2870 // RTMP_OS_Init_Timer(pAd, &pTimer->TimerObj, pTimerFunc, (PVOID) pTimer); } @@ -3635,6 +4103,12 @@ VOID RTMPCancelTimer( if (*pCancelled == TRUE) pTimer->State = TRUE; +#ifdef RT2870 + // We need to go-through the TimerQ to findout this timer handler and remove it if + // it's still waiting for execution. + + RT2870_TimerQ_Remove(pTimer->pAd, pTimer); +#endif // RT2870 // } else { @@ -3674,13 +4148,6 @@ VOID RTMPSetLED( UCHAR HighByte = 0; UCHAR LowByte; -// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware. -// So LED mode is not supported when ATE is running. -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - LowByte = pAd->LedCntl.field.LedMode&0x7f; switch (Status) { |