diff options
author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2009-08-23 15:32:06 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-09-15 12:02:23 -0700 |
commit | 9eeb783ed4a11d7eb82d0cb5d23cc214e3827c8d (patch) | |
tree | 77f8c138a7f0f825e95b88921a59ae96068b6226 /drivers/staging/rt2860/common | |
parent | 606661ea0476fb506ca87cd41b58cbb7dc14fcc0 (diff) |
Staging: rtxx70: merge rt3070 with rt2870
* remove RT30xx ifdefs
* add -DRT3070 to rt2870's EXTRA_CFLAGS
* because of changes in the way that hardware is initialized/accessed
rt3070 driver's firmware should be now also used by rt2870 driver
(this is also done by newer out-of-tree vendor driver versions, i.e.
2.1.0.0, historically in-kernel driver was based on 1.4.0.0 version)
* change RT28xx_CHIP_NAME to RTxx70
* update rt2870's help entry text
* add MODULE_ALIAS("rt3070sta") to rt2870
* update rt3070's dependencies
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/rt2860/common')
-rw-r--r-- | drivers/staging/rt2860/common/cmm_info.c | 11 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/mlme.c | 30 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/rtmp_init.c | 81 |
3 files changed, 23 insertions, 99 deletions
diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index 05623979e6b..9d589c240ed 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -1419,17 +1419,6 @@ VOID RTMPSetHT( pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0; } -#ifndef RT30xx -#ifdef RT2870 - /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/ - if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) - { - pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0; - pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; - } -#endif // RT2870 // -#endif - if(pHTPhyMode->SHORTGI == GI_400) { pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1; diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index 9de5e240a49..61a2a4eb714 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -5565,8 +5565,7 @@ VOID AsicUpdateProtect( } } -#ifdef RT30xx -// add by johnli, RF power sequence setup +#ifdef RT2870 /* ========================================================================== Description: @@ -5721,8 +5720,7 @@ VOID RT30xxReverseRFSleepModeSetup( RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue); } } -// end johnli -#endif // RT30xx // +#endif /* ========================================================================== @@ -5764,9 +5762,7 @@ VOID AsicSwitchChannel( #ifdef RT2870 // The RF programming sequence is difference between 3xxx and 2xxx if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && ( -#ifdef RT30xx (pAd->RfIcType == RFIC_3022) || (pAd->RfIcType == RFIC_3021) || -#endif (pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) { /* modify by WY for Read RF Reg. error */ @@ -5789,7 +5785,6 @@ VOID AsicSwitchChannel( RFValue = (RFValue & 0xE0) | TxPwer; RT30xxWriteRFRegister(pAd, RF_R12, RFValue); -#ifdef RT30xx // Set Tx1 Power RT30xxReadRFRegister(pAd, RF_R13, &RFValue); RFValue = (RFValue & 0xE0) | TxPwer2; @@ -5809,7 +5804,6 @@ VOID AsicSwitchChannel( else if (pAd->Antenna.field.RxPath == 2) RFValue |= 0x40; RT30xxWriteRFRegister(pAd, RF_R01, RFValue); -#endif // Set RF offset RT30xxReadRFRegister(pAd, RF_R23, &RFValue); @@ -5827,9 +5821,8 @@ VOID AsicSwitchChannel( RFValue = pAd->Mlme.CaliBW20RfR24; } RT30xxWriteRFRegister(pAd, RF_R24, RFValue); -#ifdef RT30xx RT30xxWriteRFRegister(pAd, RF_R31, RFValue); -#endif + // Enable RF tuning RT30xxReadRFRegister(pAd, RF_R07, &RFValue); RFValue = RFValue | 0x1; @@ -5838,7 +5831,6 @@ VOID AsicSwitchChannel( // latch channel for future usage. pAd->LatchRfRegs.Channel = Channel; -#ifdef RT30xx DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n", Channel, pAd->RfIcType, @@ -5848,8 +5840,6 @@ VOID AsicSwitchChannel( FreqItems3020[index].N, FreqItems3020[index].K, FreqItems3020[index].R)); -#endif - break; } } @@ -6828,13 +6818,13 @@ VOID AsicSetEdcaParm( Ac2Cfg.field.AcTxop = 5; } -#ifdef RT30xx +#ifdef RT2870 if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) { // Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta. Ac2Cfg.field.Aifsn = 5; } -#endif // RT30xx // +#endif } Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO]; @@ -6915,11 +6905,10 @@ VOID AsicSetEdcaParm( } AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test -#ifdef RT30xx +#ifdef RT2870 if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04. -#endif // RT30xx // - +#endif RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word); NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM)); @@ -8493,12 +8482,7 @@ VOID AsicStaBbpTuning( #ifdef RT2870 // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control // Otherwise, it will have some throughput side effect when low RSSI -#ifndef RT30xx - if (IS_RT3070(pAd)) -#endif -#ifdef RT30xx if (IS_RT30xx(pAd)) -#endif { if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) { diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index e6a43b64502..e7d1ed1224e 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -38,16 +38,12 @@ Jan Lee 2006-09-15 RT2860. Change for 802.11n , EEPROM, Led, BA, HT. */ #include "../rt_config.h" -#ifndef RT30xx #ifdef RT2860 #include "firmware.h" #include <linux/bitrev.h> #endif #ifdef RT2870 -#include "../../rt2870/common/firmware.h" -#endif -#endif -#ifdef RT30xx +/* New firmware handles both RT2870 and RT3070. */ #include "../../rt3070/firmware.h" #endif @@ -147,12 +143,7 @@ REG_PAIR RT30xx_RFRegTable[] = { {RF_R06, 0x02}, {RF_R07, 0x70}, {RF_R09, 0x0F}, -#ifndef RT30xx - {RF_R10, 0x71}, -#endif -#ifdef RT30xx {RF_R10, 0x41}, -#endif {RF_R11, 0x21}, {RF_R12, 0x7B}, {RF_R14, 0x90}, @@ -165,9 +156,6 @@ REG_PAIR RT30xx_RFRegTable[] = { {RF_R21, 0xDB}, {RF_R24, 0x16}, {RF_R25, 0x01}, -#ifndef RT30xx - {RF_R27, 0x03}, -#endif {RF_R29, 0x1F}, }; #define NUM_RF_REG_PARMS (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR)) @@ -1107,7 +1095,7 @@ VOID RTMPFilterCalibration( UCHAR RF_R24_Value = 0; // Give bbp filter initial value -#ifndef RT30xx +#ifndef RT2870 pAd->Mlme.CaliBW20RfR24 = 0x16; pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40 #else @@ -1131,7 +1119,7 @@ VOID RTMPFilterCalibration( BBPValue&= (~0x18); BBPValue|= (0x10); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); -#ifdef RT30xx +#ifdef RT2870 // set to BW40 RT30xxReadRFRegister(pAd, RF_R31, &value); value |= 0x20; @@ -1147,7 +1135,7 @@ VOID RTMPFilterCalibration( FilterTarget = 0x13; else FilterTarget = 0x16; -#ifdef RT30xx +#ifdef RT2870 // set to BW20 RT30xxReadRFRegister(pAd, RF_R31, &value); value &= (~0x20); @@ -1263,20 +1251,13 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) INT i; // Driver must read EEPROM to get RfIcType before initial RF registers // Initialize RF register to default value - if (IS_RT3070(pAd) -#ifdef RT30xx - || IS_RT3071(pAd) -#else - && (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) -#endif - ) + if (IS_RT3070(pAd) || IS_RT3071(pAd)) { // Init RF calibration // Driver should toggle RF R30 bit7 before init RF registers UINT32 RfReg = 0; -#ifdef RT30xx UINT32 data; -#endif + RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); RfReg |= 0x80; RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); @@ -1290,7 +1271,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); } -#ifdef RT30xx if (IS_RT3070(pAd)) { // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate @@ -1328,10 +1308,10 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) data &= ~(0x20); RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data); } -#endif + //For RF filter Calibration RTMPFilterCalibration(pAd); -#ifdef RT30xx + // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() if ((pAd->MACVersion & 0xffff) < 0x0211) RT30xxWriteRFRegister(pAd, RF_R27, 0x3); @@ -1346,7 +1326,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) // add by johnli, RF power sequence setup, load RF normal operation-mode setup RT30xxLoadRFNormalModeSetup(pAd); } -#endif } } #endif // RT2870 // @@ -1567,9 +1546,6 @@ VOID NICReadEEPROMParameters( NicConfig2.word = pAd->EEPROMDefaultValue[1]; { -#ifndef RT30xx - NicConfig2.word = 0; -#endif if ((NicConfig2.word & 0x00ff) == 0xff) { NicConfig2.word &= 0xff00; @@ -1806,10 +1782,9 @@ VOID NICInitAsicFromEEPROM( } } -#ifndef RT30xx +#ifndef RT2870 Antenna.word = pAd->Antenna.word; -#endif -#ifdef RT30xx +#else Antenna.word = pAd->EEPROMDefaultValue[0]; if (Antenna.word == 0xFFFF) { @@ -1820,7 +1795,7 @@ VOID NICInitAsicFromEEPROM( pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath; pAd->RfIcType = (UCHAR) Antenna.field.RfIcType; -#ifdef RT30xx +#ifdef RT2870 DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath)); // Save the antenna for future use @@ -1828,7 +1803,7 @@ VOID NICInitAsicFromEEPROM( #endif NicConfig2.word = pAd->EEPROMDefaultValue[1]; -#ifdef RT30xx +#ifdef RT2870 { if ((NicConfig2.word & 0x00ff) == 0xff) { @@ -1844,7 +1819,7 @@ VOID NICInitAsicFromEEPROM( // Save the antenna for future use pAd->NicConfig2.word = NicConfig2.word; -#ifdef RT30xx +#ifdef RT2870 // set default antenna as main if (pAd->RfIcType == RFIC_3020) AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); @@ -2251,21 +2226,8 @@ NDIS_STATUS NICInitializeAsic( #endif // RT3070 // RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value); } - -#ifndef RT30xx - if(IS_RT3070(pAd)) - { - // According to Frank Hsu (from Gary Tsao) - RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400); - - // Initialize RT3070 serial MAC registers which is different from RT2870 serial - RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0); - RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0); - } -#endif #endif // RT2870 // - { for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++) { @@ -2300,7 +2262,7 @@ NDIS_STATUS NICInitializeAsic( RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0); } } -#ifdef RT30xx +#ifdef RT2870 else if (IS_RT3070(pAd)) { RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); @@ -2347,22 +2309,11 @@ NDIS_STATUS NICInitializeAsic( RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value); } -#ifndef RT30xx +#ifndef RT2870 // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. if ((pAd->MACVersion&0xffff) != 0x0101) RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19); - -#ifdef RT2870 - //write RT3070 BBP wchich different with 2870 after write RT2870 BBP - if (IS_RT3070(pAd)) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05); - } -#endif // RT2870 // -#endif -#ifdef RT30xx +#else // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. // RT3090 should not program BBP R84 to 0x19, otherwise TX will block. if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd))) |