diff options
author | Greg Kroah-Hartman <gregkh@suse.de> | 2009-02-25 16:14:55 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-04-03 14:54:24 -0700 |
commit | e642f09951f7cbb69983781b07bb9cd881546ac4 (patch) | |
tree | c783967792f17f0abfab38c9a893fb9565b8bae2 /drivers/staging/rt3070/sta/connect.c | |
parent | 21a6a6e9f81fb26fbcecbb1304018d34dcd1794f (diff) |
Staging: add rt3070 wireless driver
This is the Ralink RT3070 driver from the company that does horrible
things like reading a config file from /etc. However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).
So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.
Ported to the Linux build system, fixed lots of build issues, forward
ported to the current kernel version, and other minor cleanups were all
done by me.
Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/rt3070/sta/connect.c')
-rw-r--r-- | drivers/staging/rt3070/sta/connect.c | 2857 |
1 files changed, 2857 insertions, 0 deletions
diff --git a/drivers/staging/rt3070/sta/connect.c b/drivers/staging/rt3070/sta/connect.c new file mode 100644 index 00000000000..152c0bd0f82 --- /dev/null +++ b/drivers/staging/rt3070/sta/connect.c @@ -0,0 +1,2857 @@ +/* + ************************************************************************* + * Ralink Tech Inc. + * 5F., No.36, Taiyuan St., Jhubei City, + * Hsinchu County 302, + * Taiwan, R.O.C. + * + * (c) Copyright 2002-2007, Ralink Technology, Inc. + * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + ************************************************************************* + + Module Name: + connect.c + + Abstract: + + Revision History: + Who When What + -------- ---------- ---------------------------------------------- + John 2004-08-08 Major modification from RT2560 +*/ +#include "../rt_config.h" + +UCHAR CipherSuiteWpaNoneTkip[] = { + 0x00, 0x50, 0xf2, 0x01, // oui + 0x01, 0x00, // Version + 0x00, 0x50, 0xf2, 0x02, // Multicast + 0x01, 0x00, // Number of unicast + 0x00, 0x50, 0xf2, 0x02, // unicast + 0x01, 0x00, // number of authentication method + 0x00, 0x50, 0xf2, 0x00 // authentication + }; +UCHAR CipherSuiteWpaNoneTkipLen = (sizeof(CipherSuiteWpaNoneTkip) / sizeof(UCHAR)); + +UCHAR CipherSuiteWpaNoneAes[] = { + 0x00, 0x50, 0xf2, 0x01, // oui + 0x01, 0x00, // Version + 0x00, 0x50, 0xf2, 0x04, // Multicast + 0x01, 0x00, // Number of unicast + 0x00, 0x50, 0xf2, 0x04, // unicast + 0x01, 0x00, // number of authentication method + 0x00, 0x50, 0xf2, 0x00 // authentication + }; +UCHAR CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) / sizeof(UCHAR)); + +// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS, +// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS +// All settings successfuly negotiated furing MLME state machines become final settings +// and are copied to pAd->StaActive +#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \ +{ \ + (_pAd)->CommonCfg.SsidLen = (_pAd)->MlmeAux.SsidLen; \ + NdisMoveMemory((_pAd)->CommonCfg.Ssid, (_pAd)->MlmeAux.Ssid, (_pAd)->MlmeAux.SsidLen); \ + COPY_MAC_ADDR((_pAd)->CommonCfg.Bssid, (_pAd)->MlmeAux.Bssid); \ + (_pAd)->CommonCfg.Channel = (_pAd)->MlmeAux.Channel; \ + (_pAd)->CommonCfg.CentralChannel = (_pAd)->MlmeAux.CentralChannel; \ + (_pAd)->StaActive.Aid = (_pAd)->MlmeAux.Aid; \ + (_pAd)->StaActive.AtimWin = (_pAd)->MlmeAux.AtimWin; \ + (_pAd)->StaActive.CapabilityInfo = (_pAd)->MlmeAux.CapabilityInfo; \ + (_pAd)->CommonCfg.BeaconPeriod = (_pAd)->MlmeAux.BeaconPeriod; \ + (_pAd)->StaActive.CfpMaxDuration = (_pAd)->MlmeAux.CfpMaxDuration; \ + (_pAd)->StaActive.CfpPeriod = (_pAd)->MlmeAux.CfpPeriod; \ + (_pAd)->StaActive.SupRateLen = (_pAd)->MlmeAux.SupRateLen; \ + NdisMoveMemory((_pAd)->StaActive.SupRate, (_pAd)->MlmeAux.SupRate, (_pAd)->MlmeAux.SupRateLen);\ + (_pAd)->StaActive.ExtRateLen = (_pAd)->MlmeAux.ExtRateLen; \ + NdisMoveMemory((_pAd)->StaActive.ExtRate, (_pAd)->MlmeAux.ExtRate, (_pAd)->MlmeAux.ExtRateLen);\ + NdisMoveMemory(&(_pAd)->CommonCfg.APEdcaParm, &(_pAd)->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));\ + NdisMoveMemory(&(_pAd)->CommonCfg.APQosCapability, &(_pAd)->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));\ + NdisMoveMemory(&(_pAd)->CommonCfg.APQbssLoad, &(_pAd)->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));\ + COPY_MAC_ADDR((_pAd)->MacTab.Content[BSSID_WCID].Addr, (_pAd)->MlmeAux.Bssid); \ + (_pAd)->MacTab.Content[BSSID_WCID].Aid = (_pAd)->MlmeAux.Aid; \ + (_pAd)->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = (_pAd)->StaCfg.PairCipher;\ + COPY_MAC_ADDR((_pAd)->MacTab.Content[BSSID_WCID].PairwiseKey.BssId, (_pAd)->MlmeAux.Bssid);\ + (_pAd)->MacTab.Content[BSSID_WCID].RateLen = (_pAd)->StaActive.SupRateLen + (_pAd)->StaActive.ExtRateLen;\ +} + +/* + ========================================================================== + Description: + + IRQL = PASSIVE_LEVEL + + ========================================================================== +*/ +VOID MlmeCntlInit( + IN PRTMP_ADAPTER pAd, + IN STATE_MACHINE *S, + OUT STATE_MACHINE_FUNC Trans[]) +{ + // Control state machine differs from other state machines, the interface + // follows the standard interface + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID MlmeCntlMachinePerformAction( + IN PRTMP_ADAPTER pAd, + IN STATE_MACHINE *S, + IN MLME_QUEUE_ELEM *Elem) +{ + switch(pAd->Mlme.CntlMachine.CurrState) + { + case CNTL_IDLE: + { + CntlIdleProc(pAd, Elem); + } + break; + case CNTL_WAIT_DISASSOC: + CntlWaitDisassocProc(pAd, Elem); + break; + case CNTL_WAIT_JOIN: + CntlWaitJoinProc(pAd, Elem); + break; + + // CNTL_WAIT_REASSOC is the only state in CNTL machine that does + // not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)". + // Therefore not protected by NDIS's "only one outstanding OID request" + // rule. Which means NDIS may SET OID in the middle of ROAMing attempts. + // Current approach is to block new SET request at RTMPSetInformation() + // when CntlMachine.CurrState is not CNTL_IDLE + case CNTL_WAIT_REASSOC: + CntlWaitReassocProc(pAd, Elem); + break; + + case CNTL_WAIT_START: + CntlWaitStartProc(pAd, Elem); + break; + case CNTL_WAIT_AUTH: + CntlWaitAuthProc(pAd, Elem); + break; + case CNTL_WAIT_AUTH2: + CntlWaitAuthProc2(pAd, Elem); + break; + case CNTL_WAIT_ASSOC: + CntlWaitAssocProc(pAd, Elem); + break; + + case CNTL_WAIT_OID_LIST_SCAN: + if(Elem->MsgType == MT2_SCAN_CONF) + { + // Resume TxRing after SCANING complete. We hope the out-of-service time + // won't be too long to let upper layer time-out the waiting frames + RTMPResumeMsduTransmission(pAd); + if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) + { + // Cisco scan request is finished, prepare beacon report + MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL); + } + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + + // + // Set LED status to previous status. + // + if (pAd->bLedOnScanning) + { + pAd->bLedOnScanning = FALSE; + RTMPSetLED(pAd, pAd->LedStatus); + } +#ifdef DOT11N_DRAFT3 + // AP sent a 2040Coexistence mgmt frame, then station perform a scan, and then send back the respone. + if (pAd->CommonCfg.BSSCoexist2040.field.InfoReq == 1) + { + Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE); + } +#endif // DOT11N_DRAFT3 // + } + break; + + case CNTL_WAIT_OID_DISASSOC: + if (Elem->MsgType == MT2_DISASSOC_CONF) + { + LinkDown(pAd, FALSE); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + } + break; +#ifdef RT2870 + // + // This state is for that we want to connect to an AP but + // it didn't find on BSS List table. So we need to scan the air first, + // after that we can try to connect to the desired AP if available. + // + case CNTL_WAIT_SCAN_FOR_CONNECT: + if(Elem->MsgType == MT2_SCAN_CONF) + { + // Resume TxRing after SCANING complete. We hope the out-of-service time + // won't be too long to let upper layer time-out the waiting frames + RTMPResumeMsduTransmission(pAd); +#ifdef CCX_SUPPORT + if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) + { + // Cisco scan request is finished, prepare beacon report + MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL); + } +#endif // CCX_SUPPORT // + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + + // + // Check if we can connect to. + // + BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen); + if (pAd->MlmeAux.SsidBssTab.BssNr > 0) + { + MlmeAutoReconnectLastSSID(pAd); + } + } + break; +#endif // RT2870 // + default: + DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)", Elem->MsgType)); + break; + } +} + + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlIdleProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + MLME_DISASSOC_REQ_STRUCT DisassocReq; + + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) + return; + + switch(Elem->MsgType) + { + case OID_802_11_SSID: + CntlOidSsidProc(pAd, Elem); + break; + + case OID_802_11_BSSID: + CntlOidRTBssidProc(pAd,Elem); + break; + + case OID_802_11_BSSID_LIST_SCAN: + CntlOidScanProc(pAd,Elem); + break; + + case OID_802_11_DISASSOCIATE: +#ifdef RALINK_ATE + if(ATE_ON(pAd)) + { + DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); + break; + } +#endif // RALINK_ATE // + DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING); + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC; +#ifdef WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI) +#endif // WPA_SUPPLICANT_SUPPORT // + { + // Set the AutoReconnectSsid to prevent it reconnect to old SSID + // Since calling this indicate user don't want to connect to that SSID anymore. + pAd->MlmeAux.AutoReconnectSsidLen= 32; + NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen); + } + break; + + case MT2_MLME_ROAMING_REQ: + CntlMlmeRoamingProc(pAd, Elem); + break; + + case OID_802_11_MIC_FAILURE_REPORT_FRAME: + WpaMicFailureReportFrame(pAd, Elem); + break; + +#ifdef QOS_DLS_SUPPORT + case RT_OID_802_11_SET_DLS_PARAM: + CntlOidDLSSetupProc(pAd, Elem); + break; +#endif // QOS_DLS_SUPPORT // + + default: + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Illegal message in CntlIdleProc(MsgType=%ld)\n",Elem->MsgType)); + break; + } +} + +VOID CntlOidScanProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + MLME_SCAN_REQ_STRUCT ScanReq; + ULONG BssIdx = BSS_NOT_FOUND; + BSS_ENTRY CurrBss; + +#ifdef RALINK_ATE +/* Disable scanning when ATE is running. */ + if (ATE_ON(pAd)) + return; +#endif // RALINK_ATE // + + + // record current BSS if network is connected. + // 2003-2-13 do not include current IBSS if this is the only STA in this IBSS. + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) + { + BssIdx = BssSsidTableSearch(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, pAd->CommonCfg.Channel); + if (BssIdx != BSS_NOT_FOUND) + { + NdisMoveMemory(&CurrBss, &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY)); + } + } + + // clean up previous SCAN result, add current BSS back to table if any + BssTableInit(&pAd->ScanTab); + if (BssIdx != BSS_NOT_FOUND) + { + // DDK Note: If the NIC is associated with a particular BSSID and SSID + // that are not contained in the list of BSSIDs generated by this scan, the + // BSSID description of the currently associated BSSID and SSID should be + // appended to the list of BSSIDs in the NIC's database. + // To ensure this, we append this BSS as the first entry in SCAN result + NdisMoveMemory(&pAd->ScanTab.BssEntry[0], &CurrBss, sizeof(BSS_ENTRY)); + pAd->ScanTab.BssNr = 1; + } + + ScanParmFill(pAd, &ScanReq, "", 0, BSS_ANY, SCAN_ACTIVE); + MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, + sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN; +} + +/* + ========================================================================== + Description: + Before calling this routine, user desired SSID should already been + recorded in CommonCfg.Ssid[] + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlOidSsidProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM * Elem) +{ + PNDIS_802_11_SSID pOidSsid = (NDIS_802_11_SSID *)Elem->Msg; + MLME_DISASSOC_REQ_STRUCT DisassocReq; + ULONG Now; + + // Step 1. record the desired user settings to MlmeAux + NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID); + NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength); + pAd->MlmeAux.SsidLen = (UCHAR)pOidSsid->SsidLength; + NdisZeroMemory(pAd->MlmeAux.Bssid, MAC_ADDR_LEN); + pAd->MlmeAux.BssType = pAd->StaCfg.BssType; + + + // + // Update Reconnect Ssid, that user desired to connect. + // + NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID); + NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen); + pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen; + + // step 2. find all matching BSS in the lastest SCAN result (inBssTab) + // & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order + BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen); + + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - %d BSS of %d BSS match the desire (%d)SSID - %s\n", + pAd->MlmeAux.SsidBssTab.BssNr, pAd->ScanTab.BssNr, pAd->MlmeAux.SsidLen, pAd->MlmeAux.Ssid)); + NdisGetSystemUpTime(&Now); + + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && + (pAd->CommonCfg.SsidLen == pAd->MlmeAux.SsidBssTab.BssEntry[0].SsidLen) && + NdisEqualMemory(pAd->CommonCfg.Ssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Ssid, pAd->CommonCfg.SsidLen) && + MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Bssid)) + { + // Case 1. already connected with an AP who has the desired SSID + // with highest RSSI + + // Add checking Mode "LEAP" for CCX 1.0 + if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || + (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) || + (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || + (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) +#ifdef LEAP_SUPPORT + || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) +#endif // LEAP_SUPPORT // + ) && + (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)) + { + // case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo + // connection process + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP...\n")); + DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING); + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, + sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC; + } + else if (pAd->bConfigChanged == TRUE) + { + // case 1.2 Important Config has changed, we have to reconnect to the same AP + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP Because config changed...\n")); + DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING); + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, + sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC; + } + else + { + // case 1.3. already connected to the SSID with highest RSSI. + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - already with this BSSID. ignore this SET_SSID request\n")); + // + // (HCT 12.1) 1c_wlan_mediaevents required + // media connect events are indicated when associating with the same AP + // + if (INFRA_ON(pAd)) + { + // + // Since MediaState already is NdisMediaStateConnected + // We just indicate the connect event again to meet the WHQL required. + // + pAd->IndicateMediaState = NdisMediaStateConnected; + RTMP_IndicateMediaState(pAd); + pAd->ExtraInfo = GENERAL_LINK_UP; // Update extra information to link is up + } + + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; +#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT + { + union iwreq_data wrqu; + + memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN); + memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN); + wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); + + } +#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // + } + } + else if (INFRA_ON(pAd)) + { + // + // For RT61 + // [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: ) + // RT61 may lost SSID, and not connect to NDTEST_WEP_AP2 and will connect to NDTEST_WEP_AP2 by Autoreconnect + // But media status is connected, so the SSID not report correctly. + // + if (!SSID_EQUAL(pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen)) + { + // + // Different SSID means not Roaming case, so we let LinkDown() to Indicate a disconnect event. + // + pAd->MlmeAux.CurrReqIsFromNdis = TRUE; + } + // case 2. active INFRA association existent + // roaming is done within miniport driver, nothing to do with configuration + // utility. so upon a new SET(OID_802_11_SSID) is received, we just + // disassociate with the current associated AP, + // then perform a new association with this new SSID, no matter the + // new/old SSID are the same or not. + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - disassociate with current AP...\n")); + DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING); + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, + sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC; + } + else + { + if (ADHOC_ON(pAd)) + { + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - drop current ADHOC\n")); + LinkDown(pAd, FALSE); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); + pAd->IndicateMediaState = NdisMediaStateDisconnected; + RTMP_IndicateMediaState(pAd); + pAd->ExtraInfo = GENERAL_LINK_DOWN; + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():NDIS_STATUS_MEDIA_DISCONNECT Event C!\n")); + } + + if ((pAd->MlmeAux.SsidBssTab.BssNr == 0) && + (pAd->StaCfg.bAutoReconnect == TRUE) && + (pAd->MlmeAux.BssType == BSS_INFRA) && + (MlmeValidateSSID(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen) == TRUE) + ) + { + MLME_SCAN_REQ_STRUCT ScanReq; + + DBGPRINT(RT_DEBUG_TRACE, ("CntlOidSsidProc():CNTL - No matching BSS, start a new scan\n")); + ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, BSS_ANY, SCAN_ACTIVE); + MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN; + // Reset Missed scan number + pAd->StaCfg.LastScanTime = Now; + } + else + { + pAd->MlmeAux.BssIdx = 0; + IterateOnBssTab(pAd); + } + } +} + + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlOidRTBssidProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM * Elem) +{ + ULONG BssIdx; + PUCHAR pOidBssid = (PUCHAR)Elem->Msg; + MLME_DISASSOC_REQ_STRUCT DisassocReq; + MLME_JOIN_REQ_STRUCT JoinReq; + +#ifdef RALINK_ATE +/* No need to perform this routine when ATE is running. */ + if (ATE_ON(pAd)) + return; +#endif // RALINK_ATE // + + // record user desired settings + COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid); + pAd->MlmeAux.BssType = pAd->StaCfg.BssType; + + // + // Update Reconnect Ssid, that user desired to connect. + // + NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID); + pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen; + NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen); + + // find the desired BSS in the latest SCAN result table + BssIdx = BssTableSearch(&pAd->ScanTab, pOidBssid, pAd->MlmeAux.Channel); + if (BssIdx == BSS_NOT_FOUND) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - BSSID not found. reply NDIS_STATUS_NOT_ACCEPTED\n")); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + return; + } + + // copy the matched BSS entry from ScanTab to MlmeAux.SsidBssTab. Why? + // Because we need this entry to become the JOIN target in later on SYNC state machine + pAd->MlmeAux.BssIdx = 0; + pAd->MlmeAux.SsidBssTab.BssNr = 1; + NdisMoveMemory(&pAd->MlmeAux.SsidBssTab.BssEntry[0], &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY)); + + //pAd->MlmeAux.AutoReconnectSsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen; + //NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->ScanTab.BssEntry[BssIdx].Ssid, pAd->ScanTab.BssEntry[BssIdx].SsidLen); + + // Add SSID into MlmeAux for site surey joining hidden SSID + //pAd->MlmeAux.SsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen; + //NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->ScanTab.BssEntry[BssIdx].Ssid, pAd->MlmeAux.SsidLen); + + // 2002-11-26 skip the following checking. i.e. if user wants to re-connect to same AP + // we just follow normal procedure. The reason of user doing this may because he/she changed + // AP to another channel, but we still received BEACON from it thus don't claim Link Down. + // Since user knows he's changed AP channel, he'll re-connect again. By skipping the following + // checking, we'll disassociate then re-do normal association with this AP at the new channel. + // 2003-1-6 Re-enable this feature based on microsoft requirement which prefer not to re-do + // connection when setting the same BSSID. + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && + MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid, pOidBssid)) + { + // already connected to the same BSSID, go back to idle state directly + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - already in this BSSID. ignore this SET_BSSID request\n")); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; +#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT + { + union iwreq_data wrqu; + + memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN); + memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN); + wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); + + } +#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // + } + else + { + if (INFRA_ON(pAd)) + { + // disassoc from current AP first + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - disassociate with current AP ...\n")); + DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING); + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, + sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC; + } + else + { + if (ADHOC_ON(pAd)) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - drop current ADHOC\n")); + LinkDown(pAd, FALSE); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); + pAd->IndicateMediaState = NdisMediaStateDisconnected; + RTMP_IndicateMediaState(pAd); + pAd->ExtraInfo = GENERAL_LINK_DOWN; + DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event C!\n")); + } + + // Change the wepstatus to original wepstatus + pAd->StaCfg.WepStatus = pAd->StaCfg.OrigWepStatus; + pAd->StaCfg.PairCipher = pAd->StaCfg.OrigWepStatus; + pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus; + + // Check cipher suite, AP must have more secured cipher than station setting + // Set the Pairwise and Group cipher to match the intended AP setting + // We can only connect to AP with less secured cipher setting + if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) + { + pAd->StaCfg.GroupCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.GroupCipher; + + if (pAd->StaCfg.WepStatus == pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipher) + pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipher; + else if (pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipherAux != Ndis802_11WEPDisabled) + pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA.PairCipherAux; + else // There is no PairCipher Aux, downgrade our capability to TKIP + pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled; + } + else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) + { + pAd->StaCfg.GroupCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.GroupCipher; + + if (pAd->StaCfg.WepStatus == pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipher) + pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipher; + else if (pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipherAux != Ndis802_11WEPDisabled) + pAd->StaCfg.PairCipher = pAd->ScanTab.BssEntry[BssIdx].WPA2.PairCipherAux; + else // There is no PairCipher Aux, downgrade our capability to TKIP + pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled; + + // RSN capability + pAd->StaCfg.RsnCapability = pAd->ScanTab.BssEntry[BssIdx].WPA2.RsnCapability; + } + + // Set Mix cipher flag + pAd->StaCfg.bMixCipher = (pAd->StaCfg.PairCipher == pAd->StaCfg.GroupCipher) ? FALSE : TRUE; + if (pAd->StaCfg.bMixCipher == TRUE) + { + // If mix cipher, re-build RSNIE + RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0); + } + // No active association, join the BSS immediately + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - joining %02x:%02x:%02x:%02x:%02x:%02x ...\n", + pOidBssid[0],pOidBssid[1],pOidBssid[2],pOidBssid[3],pOidBssid[4],pOidBssid[5])); + + JoinParmFill(pAd, &JoinReq, pAd->MlmeAux.BssIdx); + MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_JOIN_REQ, sizeof(MLME_JOIN_REQ_STRUCT), &JoinReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_JOIN; + } + } +} + +// Roaming is the only external request triggering CNTL state machine +// despite of other "SET OID" operation. All "SET OID" related oerations +// happen in sequence, because no other SET OID will be sent to this device +// until the the previous SET operation is complete (successful o failed). +// So, how do we quarantee this ROAMING request won't corrupt other "SET OID"? +// or been corrupted by other "SET OID"? +// +// IRQL = DISPATCH_LEVEL +VOID CntlMlmeRoamingProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + // TODO: + // AP in different channel may show lower RSSI than actual value?? + // should we add a weighting factor to compensate it? + DBGPRINT(RT_DEBUG_TRACE,("CNTL - Roaming in MlmeAux.RoamTab...\n")); + + NdisMoveMemory(&pAd->MlmeAux.SsidBssTab, &pAd->MlmeAux.RoamTab, sizeof(pAd->MlmeAux.RoamTab)); + pAd->MlmeAux.SsidBssTab.BssNr = pAd->MlmeAux.RoamTab.BssNr; + + BssTableSortByRssi(&pAd->MlmeAux.SsidBssTab); + pAd->MlmeAux.BssIdx = 0; + IterateOnBssTab(pAd); +} + +#ifdef QOS_DLS_SUPPORT +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlOidDLSSetupProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + PRT_802_11_DLS pDLS = (PRT_802_11_DLS)Elem->Msg; + MLME_DLS_REQ_STRUCT MlmeDlsReq; + INT i; + USHORT reason = REASON_UNSPECIFY; + + DBGPRINT(RT_DEBUG_TRACE,("CNTL - (OID set %02x:%02x:%02x:%02x:%02x:%02x with Valid=%d, Status=%d, TimeOut=%d, CountDownTimer=%d)\n", + pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5], + pDLS->Valid, pDLS->Status, pDLS->TimeOut, pDLS->CountDownTimer)); + + if (!pAd->CommonCfg.bDLSCapable) + return; + + // DLS will not be supported when Adhoc mode + if (INFRA_ON(pAd)) + { + for (i = 0; i < MAX_NUM_OF_DLS_ENTRY; i++) + { + if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && + (pDLS->TimeOut == pAd->StaCfg.DLSEntry[i].TimeOut) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr)) + { + // 1. Same setting, just drop it + DBGPRINT(RT_DEBUG_TRACE,("CNTL - setting unchanged\n")); + break; + } + else if (!pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && + MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr)) + { + // 2. Disable DLS link case, just tear down DLS link + reason = REASON_QOS_UNWANTED_MECHANISM; + pAd->StaCfg.DLSEntry[i].Valid = FALSE; + pAd->StaCfg.DLSEntry[i].Status = DLS_NONE; + DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason); + MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq); + DBGPRINT(RT_DEBUG_TRACE,("CNTL - start tear down procedure\n")); + break; + } + else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && !pAd->StaCfg.DLSEntry[i].Valid) + { + // 3. Enable case, start DLS setup procedure + NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI)); + + //Update countdown timer + pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut; + DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason); + MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq); + DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS setup case\n")); + break; + } + else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && + (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && !MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr)) + { + // 4. update mac case, tear down old DLS and setup new DLS + reason = REASON_QOS_UNWANTED_MECHANISM; + pAd->StaCfg.DLSEntry[i].Valid = FALSE; + pAd->StaCfg.DLSEntry[i].Status = DLS_NONE; + DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason); + MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq); + NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI)); + DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason); + MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq); + DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS tear down and restart case\n")); + break; + } + else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && + MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr) && (pAd->StaCfg.DLSEntry[i].TimeOut != pDLS->TimeOut)) + { + // 5. update timeout case, start DLS setup procedure (no tear down) + pAd->StaCfg.DLSEntry[i].TimeOut = pDLS->TimeOut; + //Update countdown timer + pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut; + DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason); + MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq); + DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS update timeout case\n")); + break; + } + else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && + (pAd->StaCfg.DLSEntry[i].Status != DLS_FINISH) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr)) + { + // 6. re-setup case, start DLS setup procedure (no tear down) + DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason); + MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq); + DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS retry setup procedure\n")); + break; + } + else + { + DBGPRINT(RT_DEBUG_WARN,("CNTL - DLS not changed in entry - %d - Valid=%d, Status=%d, TimeOut=%d\n", + i, pAd->StaCfg.DLSEntry[i].Valid, pAd->StaCfg.DLSEntry[i].Status, pAd->StaCfg.DLSEntry[i].TimeOut)); + } + } + } +} +#endif // QOS_DLS_SUPPORT // + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlWaitDisassocProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + MLME_START_REQ_STRUCT StartReq; + + if (Elem->MsgType == MT2_DISASSOC_CONF) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Dis-associate successful\n")); + + if (pAd->CommonCfg.bWirelessEvent) + { + RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); + } + + LinkDown(pAd, FALSE); + + // case 1. no matching BSS, and user wants ADHOC, so we just start a new one + if ((pAd->MlmeAux.SsidBssTab.BssNr==0) && (pAd->StaCfg.BssType == BSS_ADHOC)) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - No matching BSS, start a new ADHOC (Ssid=%s)...\n",pAd->MlmeAux.Ssid)); + StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen); + MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START; + } + // case 2. try each matched BSS + else + { + pAd->MlmeAux.BssIdx = 0; + + IterateOnBssTab(pAd); + } + } +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlWaitJoinProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + USHORT Reason; + MLME_AUTH_REQ_STRUCT AuthReq; + + if (Elem->MsgType == MT2_JOIN_CONF) + { + NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT)); + if (Reason == MLME_SUCCESS) + { + // 1. joined an IBSS, we are pretty much done here + if (pAd->MlmeAux.BssType == BSS_ADHOC) + { + // + // 5G bands rules of Japan: + // Ad hoc must be disabled in W53(ch52,56,60,64) channels. + // + if ( (pAd->CommonCfg.bIEEE80211H == 1) && + RadarChannelCheck(pAd, pAd->CommonCfg.Channel) + ) + { + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Join adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel)); + return; + } + + LinkUp(pAd, BSS_ADHOC); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - join the IBSS = %02x:%02x:%02x:%02x:%02x:%02x ...\n", + pAd->CommonCfg.Bssid[0],pAd->CommonCfg.Bssid[1],pAd->CommonCfg.Bssid[2], + pAd->CommonCfg.Bssid[3],pAd->CommonCfg.Bssid[4],pAd->CommonCfg.Bssid[5])); + + pAd->IndicateMediaState = NdisMediaStateConnected; + pAd->ExtraInfo = GENERAL_LINK_UP; + } + // 2. joined a new INFRA network, start from authentication + else + { +#ifdef LEAP_SUPPORT + // Add AuthMode "LEAP" for CCX 1.X + if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) + { + AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP); + } + else +#endif // LEAP_SUPPORT // + { + // either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first + if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) || + (pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch)) + { + AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeShared); + } + else + { + AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen); + } + } + MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ, + sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH; + } + } + else + { + // 3. failed, try next BSS + pAd->MlmeAux.BssIdx++; + IterateOnBssTab(pAd); + } + } +} + + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlWaitStartProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + USHORT Result; + + if (Elem->MsgType == MT2_START_CONF) + { + NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT)); + if (Result == MLME_SUCCESS) + { + // + // 5G bands rules of Japan: + // Ad hoc must be disabled in W53(ch52,56,60,64) channels. + // + if ( (pAd->CommonCfg.bIEEE80211H == 1) && + RadarChannelCheck(pAd, pAd->CommonCfg.Channel) + ) + { + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Channel=%d, Start adhoc on W53(52,56,60,64) Channels are not accepted\n", pAd->CommonCfg.Channel)); + return; + } +#ifdef DOT11_N_SUPPORT + if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) + { + N_ChannelCheck(pAd); + SetCommonHT(pAd); + NdisMoveMemory(&pAd->MlmeAux.AddHtInfo, &pAd->CommonCfg.AddHTInfo, sizeof(ADD_HT_INFO_IE)); + RTMPCheckHt(pAd, BSSID_WCID, &pAd->CommonCfg.HtCapability, &pAd->CommonCfg.AddHTInfo); + pAd->StaActive.SupportedPhyInfo.bHtEnable = TRUE; + NdisZeroMemory(&pAd->StaActive.SupportedPhyInfo.MCSSet[0], 16); + NdisMoveMemory(&pAd->StaActive.SupportedPhyInfo.MCSSet[0], &pAd->CommonCfg.HtCapability.MCSSet[0], 16); + COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd); + + if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) && + (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE)) + { + pAd->MlmeAux.CentralChannel = pAd->CommonCfg.Channel + 2; + } + else if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) && + (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW)) + { + pAd->MlmeAux.CentralChannel = pAd->CommonCfg.Channel - 2; + } + } + else +#endif // DOT11_N_SUPPORT // + { + pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE; + } + LinkUp(pAd, BSS_ADHOC); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + // Before send beacon, driver need do radar detection + if ((pAd->CommonCfg.Channel > 14 ) + && (pAd->CommonCfg.bIEEE80211H == 1) + && RadarChannelCheck(pAd, pAd->CommonCfg.Channel)) + { + pAd->CommonCfg.RadarDetect.RDMode = RD_SILENCE_MODE; + pAd->CommonCfg.RadarDetect.RDCount = 0; +#ifdef DFS_SUPPORT + BbpRadarDetectionStart(pAd); +#endif // DFS_SUPPORT // + } + + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - start a new IBSS = %02x:%02x:%02x:%02x:%02x:%02x ...\n", + pAd->CommonCfg.Bssid[0],pAd->CommonCfg.Bssid[1],pAd->CommonCfg.Bssid[2], + pAd->CommonCfg.Bssid[3],pAd->CommonCfg.Bssid[4],pAd->CommonCfg.Bssid[5])); + } + else + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Start IBSS fail. BUG!!!!!\n")); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + } + } +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlWaitAuthProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + USHORT Reason; + MLME_ASSOC_REQ_STRUCT AssocReq; + MLME_AUTH_REQ_STRUCT AuthReq; + + if (Elem->MsgType == MT2_AUTH_CONF) + { + NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT)); + if (Reason == MLME_SUCCESS) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH OK\n")); + AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo, + ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount); + +#ifdef LEAP_SUPPORT + // + // Cisco Leap CCKM supported Re-association. + // + if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE)) + { + //if CCKM is turn on , that's mean Fast Reauthentication + //Use CCKM Reassociation instead of normal association for Fast Roaming. + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ, + sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC; + } + else +#endif // LEAP_SUPPORT // + { + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ, + sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_ASSOC; + } + } + else + { + // This fail may because of the AP already keep us in its MAC table without + // ageing-out. The previous authentication attempt must have let it remove us. + // so try Authentication again may help. For D-Link DWL-900AP+ compatibility. + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try again...\n")); +#ifdef LEAP_SUPPORT + //Add AuthMode "LEAP" for CCX 1.X + if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) + { + AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP); + } + else +#endif // LEAP_SUPPORT // + { + if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) || + (pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch)) + { + // either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first + AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeShared); + } + else + { + AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen); + } + } + MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ, + sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH2; + } + } +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlWaitAuthProc2( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + USHORT Reason; + MLME_ASSOC_REQ_STRUCT AssocReq; + MLME_AUTH_REQ_STRUCT AuthReq; + + if (Elem->MsgType == MT2_AUTH_CONF) + { + NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT)); + if (Reason == MLME_SUCCESS) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH OK\n")); + AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo, + ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount); + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ, + sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_ASSOC; + } + else + { +#ifdef LEAP_SUPPORT + // Process LEAP first, since it use different control variable + // We don't want to affect other poven operation + if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) + { + // LEAP Auth not success, try next BSS + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - *LEAP* AUTH FAIL, give up; try next BSS\n")); + DBGPRINT(RT_DEBUG_TRACE, ("Total match BSSID [=%d]\n", pAd->MlmeAux.SsidBssTab.BssNr)); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + pAd->MlmeAux.BssIdx++; + IterateOnBssTab(pAd); + } + else +#endif // LEAP_SUPPORT // + if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch) && + (pAd->MlmeAux.Alg == Ndis802_11AuthModeShared)) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try OPEN system...\n")); + AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, Ndis802_11AuthModeOpen); + MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_MLME_AUTH_REQ, + sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_AUTH2; + } + else + { + // not success, try next BSS + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, give up; try next BSS\n")); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; //??????? + pAd->MlmeAux.BssIdx++; + IterateOnBssTab(pAd); + } + } + } +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlWaitAssocProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + USHORT Reason; + + if (Elem->MsgType == MT2_ASSOC_CONF) + { + NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT)); + if (Reason == MLME_SUCCESS) + { + LinkUp(pAd, BSS_INFRA); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Association successful on BSS #%ld\n",pAd->MlmeAux.BssIdx)); + + if (pAd->CommonCfg.bWirelessEvent) + { + RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); + } + } + else + { + // not success, try next BSS + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Association fails on BSS #%ld\n",pAd->MlmeAux.BssIdx)); + pAd->MlmeAux.BssIdx++; + IterateOnBssTab(pAd); + } + } +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID CntlWaitReassocProc( + IN PRTMP_ADAPTER pAd, + IN MLME_QUEUE_ELEM *Elem) +{ + USHORT Result; + + if (Elem->MsgType == MT2_REASSOC_CONF) + { + NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT)); + if (Result == MLME_SUCCESS) + { + // + // NDIS requires a new Link UP indication but no Link Down for RE-ASSOC + // + LinkUp(pAd, BSS_INFRA); + + // send wireless event - for association + if (pAd->CommonCfg.bWirelessEvent) + RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); + + +#ifdef LEAP_SUPPORT + if (LEAP_CCKM_ON(pAd)) + { + STA_PORT_SECURED(pAd); + pAd->StaCfg.WpaState = SS_FINISH; + } +#endif // LEAP_SUPPORT // + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition successful on BSS #%ld\n", pAd->MlmeAux.RoamIdx)); + } + else + { + // reassoc failed, try to pick next BSS in the BSS Table + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition fails on BSS #%ld\n", pAd->MlmeAux.RoamIdx)); + pAd->MlmeAux.RoamIdx++; + IterateOnBssTab2(pAd); + } + } +} + + +VOID AdhocTurnOnQos( + IN PRTMP_ADAPTER pAd) +{ +#define AC0_DEF_TXOP 0 +#define AC1_DEF_TXOP 0 +#define AC2_DEF_TXOP 94 +#define AC3_DEF_TXOP 47 + + // Turn on QOs if use HT rate. + if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) + { + pAd->CommonCfg.APEdcaParm.bValid = TRUE; + pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3; + pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7; + pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1; + pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1; + + pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4; + pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4; + pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3; + pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2; + + pAd->CommonCfg.APEdcaParm.Cwmax[0] = 10; + pAd->CommonCfg.APEdcaParm.Cwmax[1] = 6; + pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4; + pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3; + + pAd->CommonCfg.APEdcaParm.Txop[0] = 0; + pAd->CommonCfg.APEdcaParm.Txop[1] = 0; + pAd->CommonCfg.APEdcaParm.Txop[2] = AC2_DEF_TXOP; + pAd->CommonCfg.APEdcaParm.Txop[3] = AC3_DEF_TXOP; + } + AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID LinkUp( + IN PRTMP_ADAPTER pAd, + IN UCHAR BssType) +{ + ULONG Now; + UINT32 Data; + BOOLEAN Cancelled; + UCHAR Value = 0, idx; + MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry; + + pEntry = &pAd->MacTab.Content[BSSID_WCID]; + + // + // ASSOC - DisassocTimeoutAction + // CNTL - Dis-associate successful + // !!! LINK DOWN !!! + // [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: ) + // + // To prevent DisassocTimeoutAction to call Link down after we link up, + // cancel the DisassocTimer no matter what it start or not. + // + RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled); + + COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd); + +#ifdef DOT11_N_SUPPORT + COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd); +#endif // DOT11_N_SUPPORT // + // It's quite difficult to tell if a newly added KEY is WEP or CKIP until a new BSS + // is formed (either ASSOC/RE-ASSOC done or IBSS started. LinkUP should be a safe place + // to examine if cipher algorithm switching is required. + //rt2860b. Don't know why need this + SwitchBetweenWepAndCkip(pAd); + + + if (BssType == BSS_ADHOC) + { + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON); + +#ifdef DOT11_N_SUPPORT + if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) && + (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE)) + { + pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2; + } + else if ((pAd->CommonCfg.Channel > 2) && + (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) && + (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW)) + { + pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2; + } +#endif // DOT11_N_SUPPORT // + +#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier + // No carrier detection when adhoc + // CarrierDetectionStop(pAd); + pAd->CommonCfg.CarrierDetect.CD_State = CD_NORMAL; +#endif // CARRIER_DETECTION_SUPPORT // + +#ifdef DOT11_N_SUPPORT + if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) + AdhocTurnOnQos(pAd); +#endif // DOT11_N_SUPPORT // + + DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" )); + } + else + { + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_INFRA_ON); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON); + + DBGPRINT(RT_DEBUG_TRACE, ("!!!Infra LINK UP !!! \n" )); + } + + // 3*3 + // reset Tx beamforming bit + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x01); + Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + +#ifdef DOT11_N_SUPPORT + // Change to AP channel + if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + pAd->CommonCfg.BBPCurrentBW = BW_40; + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + Value |= 0x10; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + // RX : control channel at lower + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value &= (~0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data &= 0xfffffffe; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel )); + } + else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + pAd->CommonCfg.BBPCurrentBW = BW_40; + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + Value |= 0x10; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data |= 0x1; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value |= (0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!! 40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel )); + } + else +#endif // DOT11_N_SUPPORT // + { + pAd->CommonCfg.BBPCurrentBW = BW_20; + pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel; + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data &= 0xfffffffe; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value &= (~0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!! 20MHz LINK UP !!! \n" )); + } + + RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW); + // + // Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission + // + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &pAd->BbpTuning.R66CurrentValue); + + DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (BssType=%d, AID=%d, ssid=%s, Channel=%d, CentralChannel = %d)\n", + BssType, pAd->StaActive.Aid, pAd->CommonCfg.Ssid, pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel)); + +#ifdef DOT11_N_SUPPORT + DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! (Density =%d, )\n", pAd->MacTab.Content[BSSID_WCID].MpduDensity)); +#endif // DOT11_N_SUPPORT // + + AsicSetBssid(pAd, pAd->CommonCfg.Bssid); + + AsicSetSlotTime(pAd, TRUE); + AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); + + // Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit + AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE, FALSE); + +#ifdef DOT11_N_SUPPORT + if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) + { + // Update HT protectionfor based on AP's operating mode. + if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1) + { + AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, TRUE); + } + else + AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE); + } +#endif // DOT11_N_SUPPORT // + + NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS)); + + NdisGetSystemUpTime(&Now); + pAd->StaCfg.LastBeaconRxTime = Now; // last RX timestamp + + if ((pAd->CommonCfg.TxPreamble != Rt802_11PreambleLong) && + CAP_IS_SHORT_PREAMBLE_ON(pAd->StaActive.CapabilityInfo)) + { + MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); + } + + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); + + if (pAd->CommonCfg.RadarDetect.RDMode == RD_SILENCE_MODE) + { +#ifdef DFS_SUPPORT + RadarDetectionStop(pAd); +#endif // DFS_SUPPORT // + } + pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE; + + if (BssType == BSS_ADHOC) + { + MakeIbssBeacon(pAd); + if ((pAd->CommonCfg.Channel > 14) + && (pAd->CommonCfg.bIEEE80211H == 1) + && RadarChannelCheck(pAd, pAd->CommonCfg.Channel)) + { + ; //Do nothing + } + else + { + AsicEnableIbssSync(pAd); + } + + // In ad hoc mode, use MAC table from index 1. + // p.s ASIC use all 0xff as termination of WCID table search.To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here. + RTMP_IO_WRITE32(pAd, MAC_WCID_BASE, 0x00); + RTMP_IO_WRITE32(pAd, 0x1808, 0x00); + + // If WEP is enabled, add key material and cipherAlg into Asic + // Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000) + + if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) + { + PUCHAR Key; + UCHAR CipherAlg; + + for (idx=0; idx < SHARE_KEY_NUM; idx++) + { + CipherAlg = pAd->SharedKey[BSS0][idx].CipherAlg; + Key = pAd->SharedKey[BSS0][idx].Key; + + if (pAd->SharedKey[BSS0][idx].KeyLen > 0) + { + // Set key material and cipherAlg to Asic + AsicAddSharedKeyEntry(pAd, BSS0, idx, CipherAlg, Key, NULL, NULL); + + if (idx == pAd->StaCfg.DefaultKeyId) + { + // Update WCID attribute table and IVEIV table for this group key table + RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, NULL); + } + } + + + } + } + // If WPANone is enabled, add key material and cipherAlg into Asic + // Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000) + else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) + { + pAd->StaCfg.DefaultKeyId = 0; // always be zero + + NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY)); + pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK; + NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pAd->StaCfg.PMK, LEN_TKIP_EK); + + if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) + { + NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_RXMICK); + NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, &pAd->StaCfg.PMK[16], LEN_TKIP_TXMICK); + } + + // Decide its ChiperAlg + if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) + pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP; + else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled) + pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES; + else + { + DBGPRINT(RT_DEBUG_TRACE, ("Unknow Cipher (=%d), set Cipher to AES\n", pAd->StaCfg.PairCipher)); + pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES; + } + + // Set key material and cipherAlg to Asic + AsicAddSharedKeyEntry(pAd, + BSS0, + 0, + pAd->SharedKey[BSS0][0].CipherAlg, + pAd->SharedKey[BSS0][0].Key, + pAd->SharedKey[BSS0][0].TxMic, + pAd->SharedKey[BSS0][0].RxMic); + + // Update WCID attribute table and IVEIV table for this group key table + RTMPAddWcidAttributeEntry(pAd, BSS0, 0, pAd->SharedKey[BSS0][0].CipherAlg, NULL); + + } + + } + else // BSS_INFRA + { + // Check the new SSID with last SSID + while (Cancelled == TRUE) + { + if (pAd->CommonCfg.LastSsidLen == pAd->CommonCfg.SsidLen) + { + if (RTMPCompareMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid, pAd->CommonCfg.LastSsidLen) == 0) + { + // Link to the old one no linkdown is required. + break; + } + } + // Send link down event before set to link up + pAd->IndicateMediaState = NdisMediaStateDisconnected; + RTMP_IndicateMediaState(pAd); + pAd->ExtraInfo = GENERAL_LINK_DOWN; + DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event AA!\n")); + break; + } + + // + // On WPA mode, Remove All Keys if not connect to the last BSSID + // Key will be set after 4-way handshake. + // + if ((pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) + { + ULONG IV; + + // Remove all WPA keys + RTMPWPARemoveAllKeys(pAd); + pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED; + pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP; + + // Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP + // If IV related values are too large in GroupMsg2, AP would ignore this message. + IV = 0; + IV |= (pAd->StaCfg.DefaultKeyId << 30); + AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0); + } + // NOTE: + // the decision of using "short slot time" or not may change dynamically due to + // new STA association to the AP. so we have to decide that upon parsing BEACON, not here + + // NOTE: + // the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically + // due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here + + ComposePsPoll(pAd); + ComposeNullFrame(pAd); + + AsicEnableBssSync(pAd); + + // Add BSSID to WCID search table + AsicUpdateRxWCIDTable(pAd, BSSID_WCID, pAd->CommonCfg.Bssid); + + NdisAcquireSpinLock(&pAd->MacTabLock); + // add this BSSID entry into HASH table + { + UCHAR HashIdx; + + //pEntry = &pAd->MacTab.Content[BSSID_WCID]; + HashIdx = MAC_ADDR_HASH_INDEX(pAd->CommonCfg.Bssid); + if (pAd->MacTab.Hash[HashIdx] == NULL) + { + pAd->MacTab.Hash[HashIdx] = pEntry; + } + else + { + pCurrEntry = pAd->MacTab.Hash[HashIdx]; + while (pCurrEntry->pNext != NULL) + pCurrEntry = pCurrEntry->pNext; + pCurrEntry->pNext = pEntry; + } + } + NdisReleaseSpinLock(&pAd->MacTabLock); + + + // If WEP is enabled, add paiewise and shared key +#ifdef WPA_SUPPLICANT_SUPPORT + if (((pAd->StaCfg.WpaSupplicantUP)&& + (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&& + (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) || + ((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&& + (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled))) +#else + if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) +#endif // WPA_SUPPLICANT_SUPPORT // + { + PUCHAR Key; + UCHAR CipherAlg; + + for (idx=0; idx < SHARE_KEY_NUM; idx++) + { + CipherAlg = pAd->SharedKey[BSS0][idx].CipherAlg; + Key = pAd->SharedKey[BSS0][idx].Key; + + if (pAd->SharedKey[BSS0][idx].KeyLen > 0) + { + // Set key material and cipherAlg to Asic + AsicAddSharedKeyEntry(pAd, BSS0, idx, CipherAlg, Key, NULL, NULL); + + if (idx == pAd->StaCfg.DefaultKeyId) + { + // Assign group key info + RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, NULL); + + // Assign pairwise key info + RTMPAddWcidAttributeEntry(pAd, BSS0, idx, CipherAlg, pEntry); + } + } + } + } + + // only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode + // should wait until at least 2 active nodes in this BSSID. + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); + + // For GUI ++ + if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA) + { + pAd->IndicateMediaState = NdisMediaStateConnected; + pAd->ExtraInfo = GENERAL_LINK_UP; + RTMP_IndicateMediaState(pAd); + } + // -- + + // Add BSSID in my MAC Table. + NdisAcquireSpinLock(&pAd->MacTabLock); + RTMPMoveMemory(pAd->MacTab.Content[BSSID_WCID].Addr, pAd->CommonCfg.Bssid, MAC_ADDR_LEN); + pAd->MacTab.Content[BSSID_WCID].Aid = BSSID_WCID; + pAd->MacTab.Content[BSSID_WCID].pAd = pAd; + pAd->MacTab.Content[BSSID_WCID].ValidAsCLI = TRUE; //Although this is bssid..still set ValidAsCl + pAd->MacTab.Size = 1; // infra mode always set MACtab size =1. + pAd->MacTab.Content[BSSID_WCID].Sst = SST_ASSOC; + pAd->MacTab.Content[BSSID_WCID].AuthState = SST_ASSOC; + pAd->MacTab.Content[BSSID_WCID].AuthMode = pAd->StaCfg.AuthMode; + pAd->MacTab.Content[BSSID_WCID].WepStatus = pAd->StaCfg.WepStatus; + NdisReleaseSpinLock(&pAd->MacTabLock); + + DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !!! ClientStatusFlags=%lx)\n", + pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags)); + + MlmeUpdateTxRates(pAd, TRUE, BSS0); +#ifdef DOT11_N_SUPPORT + MlmeUpdateHtTxRates(pAd, BSS0); + DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable)); +#endif // DOT11_N_SUPPORT // + + // + // Report Adjacent AP report. + // +#ifdef LEAP_SUPPORT + CCXAdjacentAPReport(pAd); +#endif // LEAP_SUPPORT // + + if (pAd->CommonCfg.bAggregationCapable) + { + if ((pAd->CommonCfg.bPiggyBackCapable) && (pAd->MlmeAux.APRalinkIe & 0x00000003) == 3) + { + + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED); + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); + RTMPSetPiggyBack(pAd, TRUE); + DBGPRINT(RT_DEBUG_TRACE, ("Turn on Piggy-Back\n")); + } + else if (pAd->MlmeAux.APRalinkIe & 0x00000001) + { + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); + } + } + + if (pAd->MlmeAux.APRalinkIe != 0x0) + { +#ifdef DOT11_N_SUPPORT + if (CLIENT_STATUS_TEST_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RDG_CAPABLE)) + { + AsicEnableRDG(pAd); + } +#endif // DOT11_N_SUPPORT // + OPSTATUS_SET_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET); + CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET); + } + else + { + OPSTATUS_CLEAR_FLAG(pAd, fCLIENT_STATUS_RALINK_CHIPSET); + CLIENT_STATUS_CLEAR_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_RALINK_CHIPSET); + } + } + +#ifdef DOT11_N_SUPPORT + DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = %x. ClientStatusFlags = %lx\n", pAd->CommonCfg.BACapability.word, pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags)); +#endif // DOT11_N_SUPPORT // + + // Set LED + RTMPSetLED(pAd, LED_LINK_UP); + + pAd->Mlme.PeriodicRound = 0; + pAd->Mlme.OneSecPeriodicRound = 0; + pAd->bConfigChanged = FALSE; // Reset config flag + pAd->ExtraInfo = GENERAL_LINK_UP; // Update extra information to link is up + + // Set asic auto fall back + { + PUCHAR pTable; + UCHAR TableSize = 0; + + MlmeSelectTxRateTable(pAd, &pAd->MacTab.Content[BSSID_WCID], &pTable, &TableSize, &pAd->CommonCfg.TxRateIndex); + AsicUpdateAutoFallBackTable(pAd, pTable); + } + + NdisAcquireSpinLock(&pAd->MacTabLock); + pEntry->HTPhyMode.word = pAd->StaCfg.HTPhyMode.word; + pEntry->MaxHTPhyMode.word = pAd->StaCfg.HTPhyMode.word; + if (pAd->StaCfg.bAutoTxRateSwitch == FALSE) + { + pEntry->bAutoTxRateSwitch = FALSE; +#ifdef DOT11_N_SUPPORT + if (pEntry->HTPhyMode.field.MCS == 32) + pEntry->HTPhyMode.field.ShortGI = GI_800; + + if ((pEntry->HTPhyMode.field.MCS > MCS_7) || (pEntry->HTPhyMode.field.MCS == 32)) + pEntry->HTPhyMode.field.STBC = STBC_NONE; +#endif // DOT11_N_SUPPORT // + // If the legacy mode is set, overwrite the transmit setting of this entry. + if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM) + RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry); + } + else + pEntry->bAutoTxRateSwitch = TRUE; + NdisReleaseSpinLock(&pAd->MacTabLock); + + // Let Link Status Page display first initial rate. + pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word); + // Select DAC according to HT or Legacy + if (pAd->StaActive.SupportedPhyInfo.MCSSet[0] != 0x00) + { + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value); + Value &= (~0x18); + if (pAd->Antenna.field.TxPath == 2) + { + Value |= 0x10; + } + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value); + } + else + { + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value); + Value &= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, Value); + } + +#ifdef DOT11_N_SUPPORT + if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) + { + } + else if (pEntry->MaxRAmpduFactor == 0) + { + // If HT AP doesn't support MaxRAmpduFactor = 1, we need to set max PSDU to 0. + // Because our Init value is 1 at MACRegTable. + RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff); + } +#endif // DOT11_N_SUPPORT // + + // Patch for Marvel AP to gain high throughput + // Need to set as following, + // 1. Set txop in register-EDCA_AC0_CFG as 0x60 + // 2. Set EnTXWriteBackDDONE in register-WPDMA_GLO_CFG as zero + // 3. PBF_MAX_PCNT as 0x1F3FBF9F + // 4. kick per two packets when dequeue + // + // Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable + // + // if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is. +#ifdef DOT11_N_SUPPORT +// if ((!IS_RT30xx(pAd)) && + if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) && + (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)) + || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))) + { + RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); + Data &= 0xFFFFFF00; + RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data); + + RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3F7F9F); + DBGPRINT(RT_DEBUG_TRACE, ("Txburst 1\n")); + } + else +#endif // DOT11_N_SUPPORT // + if (pAd->CommonCfg.bEnableTxBurst) + { + RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); + Data &= 0xFFFFFF00; + Data |= 0x60; + RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data); + pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = TRUE; + + RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3FBF9F); + DBGPRINT(RT_DEBUG_TRACE, ("Txburst 2\n")); + } + else + { + RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); + Data &= 0xFFFFFF00; + RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data); + + RTMP_IO_WRITE32(pAd, PBF_MAX_PCNT, 0x1F3F7F9F); + DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n")); + } + +#ifdef DOT11_N_SUPPORT + // Re-check to turn on TX burst or not. + if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE) && ((STA_WEP_ON(pAd))||(STA_TKIP_ON(pAd)))) + { + pAd->CommonCfg.IOTestParm.bNextDisableRxBA = TRUE; + if (pAd->CommonCfg.bEnableTxBurst) + { + UINT32 MACValue = 0; + // Force disable TXOP value in this case. The same action in MLMEUpdateProtect too. + // I didn't change PBF_MAX_PCNT setting. + RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &MACValue); + MACValue &= 0xFFFFFF00; + RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, MACValue); + pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE; + } + } + else + { + pAd->CommonCfg.IOTestParm.bNextDisableRxBA = FALSE; + } +#endif // DOT11_N_SUPPORT // + + pAd->CommonCfg.IOTestParm.bLastAtheros = FALSE; + COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid); + DBGPRINT(RT_DEBUG_TRACE, ("!!!pAd->bNextDisableRxBA= %d \n", pAd->CommonCfg.IOTestParm.bNextDisableRxBA)); + // BSSID add in one MAC entry too. Because in Tx, ASIC need to check Cipher and IV/EIV, BAbitmap + // Pther information in MACTab.Content[BSSID_WCID] is not necessary for driver. + // Note: As STA, The MACTab.Content[BSSID_WCID]. PairwiseKey and Shared Key for BSS0 are the same. + + if (pAd->StaCfg.WepStatus <= Ndis802_11WEPDisabled) + { + pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilterAcceptAll; + } + + NdisAcquireSpinLock(&pAd->MacTabLock); + pEntry->PortSecured = pAd->StaCfg.PortSecured; + NdisReleaseSpinLock(&pAd->MacTabLock); + + // + // Patch Atheros AP TX will breakdown issue. + // AP Model: DLink DWL-8200AP + // + if (INFRA_ON(pAd) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && STA_TKIP_ON(pAd)) + { + RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x01); + } + else + { + RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x00); + } + + RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); + +#ifdef DOT11_N_SUPPORT +#ifdef DOT11N_DRAFT3 + if ((pAd->CommonCfg.BACapability.field.b2040CoexistScanSup) && (pAd->CommonCfg.Channel <= 11)) + { + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SCAN_2040); + BuildEffectedChannelList(pAd); + } +#endif // DOT11N_DRAFT3 // +#endif // DOT11_N_SUPPORT // +} + +/* + ========================================================================== + + Routine Description: + Disconnect current BSSID + + Arguments: + pAd - Pointer to our adapter + IsReqFromAP - Request from AP + + Return Value: + None + + IRQL = DISPATCH_LEVEL + + Note: + We need more information to know it's this requst from AP. + If yes! we need to do extra handling, for example, remove the WPA key. + Otherwise on 4-way handshaking will faied, since the WPA key didn't be + remove while auto reconnect. + Disconnect request from AP, it means we will start afresh 4-way handshaking + on WPA mode. + + ========================================================================== +*/ +VOID LinkDown( + IN PRTMP_ADAPTER pAd, + IN BOOLEAN IsReqFromAP) +{ + UCHAR i, ByteValue = 0; + + // Do nothing if monitor mode is on + if (MONITOR_ON(pAd)) + return; + +#ifdef RALINK_ATE + // Nothing to do in ATE mode. + if (ATE_ON(pAd)) + return; +#endif // RALINK_ATE // + + if (pAd->CommonCfg.bWirelessEvent) + { + RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n")); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); + + if (ADHOC_ON(pAd)) // Adhoc mode link down + { + DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n")); + + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); + pAd->IndicateMediaState = NdisMediaStateDisconnected; + RTMP_IndicateMediaState(pAd); + pAd->ExtraInfo = GENERAL_LINK_DOWN; + BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Channel); + DBGPRINT(RT_DEBUG_TRACE, ("!!! MacTab.Size=%d !!!\n", pAd->MacTab.Size)); + } + else // Infra structure mode + { + DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 2!!!\n")); + +#ifdef QOS_DLS_SUPPORT + // DLS tear down frame must be sent before link down + // send DLS-TEAR_DOWN message + if (pAd->CommonCfg.bDLSCapable) + { + // tear down local dls table entry + for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++) + { + if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)) + { + pAd->StaCfg.DLSEntry[i].Status = DLS_NONE; + RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr); + } + } + + // tear down peer dls table entry + for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++) + { + if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH)) + { + pAd->StaCfg.DLSEntry[i].Status = DLS_NONE; + RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr); + } + } + } +#endif // QOS_DLS_SUPPORT // + + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); + + // Saved last SSID for linkup comparison + pAd->CommonCfg.LastSsidLen = pAd->CommonCfg.SsidLen; + NdisMoveMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid, pAd->CommonCfg.LastSsidLen); + COPY_MAC_ADDR(pAd->CommonCfg.LastBssid, pAd->CommonCfg.Bssid); + if (pAd->MlmeAux.CurrReqIsFromNdis == TRUE) + { + pAd->IndicateMediaState = NdisMediaStateDisconnected; + RTMP_IndicateMediaState(pAd); + pAd->ExtraInfo = GENERAL_LINK_DOWN; + DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event A!\n")); + pAd->MlmeAux.CurrReqIsFromNdis = FALSE; + } + else + { + // + // If disassociation request is from NDIS, then we don't need to delete BSSID from entry. + // Otherwise lost beacon or receive De-Authentication from AP, + // then we should delete BSSID from BssTable. + // If we don't delete from entry, roaming will fail. + // + BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid, pAd->CommonCfg.Channel); + } + + // restore back to - + // 1. long slot (20 us) or short slot (9 us) time + // 2. turn on/off RTS/CTS and/or CTS-to-self protection + // 3. short preamble + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED); + + if (pAd->StaCfg.CCXAdjacentAPReportFlag == TRUE) + { + // + // Record current AP's information. + // for later used reporting Adjacent AP report. + // + pAd->StaCfg.CCXAdjacentAPChannel = pAd->CommonCfg.Channel; + pAd->StaCfg.CCXAdjacentAPSsidLen = pAd->CommonCfg.SsidLen; + NdisMoveMemory(pAd->StaCfg.CCXAdjacentAPSsid, pAd->CommonCfg.Ssid, pAd->StaCfg.CCXAdjacentAPSsidLen); + COPY_MAC_ADDR(pAd->StaCfg.CCXAdjacentAPBssid, pAd->CommonCfg.Bssid); + } + +#ifdef EXT_BUILD_CHANNEL_LIST + // Country IE of the AP will be evaluated and will be used. + if (pAd->StaCfg.IEEE80211dClientMode != Rt802_11_D_None) + { + NdisMoveMemory(&pAd->CommonCfg.CountryCode[0], &pAd->StaCfg.StaOriCountryCode[0], 2); + pAd->CommonCfg.Geography = pAd->StaCfg.StaOriGeography; + BuildChannelListEx(pAd); + } +#endif // EXT_BUILD_CHANNEL_LIST // + + } + + for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++) + { + if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) + MacTableDeleteEntry(pAd, pAd->MacTab.Content[i].Aid, pAd->MacTab.Content[i].Addr); + } + + pAd->StaCfg.CCXQosECWMin = 4; + pAd->StaCfg.CCXQosECWMax = 10; + + AsicSetSlotTime(pAd, TRUE); //FALSE); + AsicSetEdcaParm(pAd, NULL); + + // Set LED + RTMPSetLED(pAd, LED_LINK_DOWN); + pAd->LedIndicatorStregth = 0xF0; + RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, firmware is not done it. + + AsicDisableSync(pAd); + + pAd->Mlme.PeriodicRound = 0; + pAd->Mlme.OneSecPeriodicRound = 0; + + if (pAd->StaCfg.BssType == BSS_INFRA) + { + // Remove StaCfg Information after link down + NdisZeroMemory(pAd->CommonCfg.Bssid, MAC_ADDR_LEN); + NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID); + pAd->CommonCfg.SsidLen = 0; + } +#ifdef DOT11_N_SUPPORT + NdisZeroMemory(&pAd->MlmeAux.HtCapability, sizeof(HT_CAPABILITY_IE)); + NdisZeroMemory(&pAd->MlmeAux.AddHtInfo, sizeof(ADD_HT_INFO_IE)); + pAd->MlmeAux.HtCapabilityLen = 0; + pAd->MlmeAux.NewExtChannelOffset = 0xff; +#endif // DOT11_N_SUPPORT // + + // Reset WPA-PSK state. Only reset when supplicant enabled + if (pAd->StaCfg.WpaState != SS_NOTUSE) + { + pAd->StaCfg.WpaState = SS_START; + // Clear Replay counter + NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8); + +#ifdef QOS_DLS_SUPPORT + if (pAd->CommonCfg.bDLSCapable) + NdisZeroMemory(pAd->StaCfg.DlsReplayCounter, 8); +#endif // QOS_DLS_SUPPORT // + } + + + // + // if link down come from AP, we need to remove all WPA keys on WPA mode. + // otherwise will cause 4-way handshaking failed, since the WPA key not empty. + // + if ((IsReqFromAP) && (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) + { + // Remove all WPA keys + RTMPWPARemoveAllKeys(pAd); + } + + // 802.1x port control +#ifdef WPA_SUPPLICANT_SUPPORT + // Prevent clear PortSecured here with static WEP + // NetworkManger set security policy first then set SSID to connect AP. + if (pAd->StaCfg.WpaSupplicantUP && + (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) && + (pAd->StaCfg.IEEE8021X == FALSE)) + { + pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + } + else +#endif // WPA_SUPPLICANT_SUPPORT // + { + pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED; + pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP; + } + + NdisAcquireSpinLock(&pAd->MacTabLock); + pAd->MacTab.Content[BSSID_WCID].PortSecured = pAd->StaCfg.PortSecured; + NdisReleaseSpinLock(&pAd->MacTabLock); + + pAd->StaCfg.MicErrCnt = 0; + + // Turn off Ckip control flag + pAd->StaCfg.bCkipOn = FALSE; + pAd->StaCfg.CCXEnable = FALSE; + + pAd->IndicateMediaState = NdisMediaStateDisconnected; + // Update extra information to link is up + pAd->ExtraInfo = GENERAL_LINK_DOWN; + + //pAd->StaCfg.AdhocBOnlyJoined = FALSE; + //pAd->StaCfg.AdhocBGJoined = FALSE; + //pAd->StaCfg.Adhoc20NJoined = FALSE; + pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE; + + // Reset the Current AP's IP address + NdisZeroMemory(pAd->StaCfg.AironetIPAddress, 4); +#ifdef RT2870 + pAd->bUsbTxBulkAggre = FALSE; +#endif // RT2870 // + + // Clean association information + NdisZeroMemory(&pAd->StaCfg.AssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION)); + pAd->StaCfg.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION); + pAd->StaCfg.ReqVarIELen = 0; + pAd->StaCfg.ResVarIELen = 0; + + // + // Reset RSSI value after link down + // + pAd->StaCfg.RssiSample.AvgRssi0 = 0; + pAd->StaCfg.RssiSample.AvgRssi0X8 = 0; + pAd->StaCfg.RssiSample.AvgRssi1 = 0; + pAd->StaCfg.RssiSample.AvgRssi1X8 = 0; + pAd->StaCfg.RssiSample.AvgRssi2 = 0; + pAd->StaCfg.RssiSample.AvgRssi2X8 = 0; + + // Restore MlmeRate + pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate; + pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate; + +#ifdef DOT11_N_SUPPORT + // + // After Link down, reset piggy-back setting in ASIC. Disable RDG. + // + if (pAd->CommonCfg.BBPCurrentBW == BW_40) + { + pAd->CommonCfg.BBPCurrentBW = BW_20; + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &ByteValue); + ByteValue &= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue); + } +#endif // DOT11_N_SUPPORT // + // Reset DAC + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue); + ByteValue &= (~0x18); + if (pAd->Antenna.field.TxPath == 2) + { + ByteValue |= 0x10; + } + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, ByteValue); + + RTMPSetPiggyBack(pAd,FALSE); + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_PIGGYBACK_INUSED); + +#ifdef DOT11_N_SUPPORT + pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word; +#endif // DOT11_N_SUPPORT // + + // Restore all settings in the following. + AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT|CCKSETPROTECT|OFDMSETPROTECT), TRUE, FALSE); + AsicDisableRDG(pAd); + pAd->CommonCfg.IOTestParm.bCurrentAtheros = FALSE; + pAd->CommonCfg.IOTestParm.bNowAtherosBurstOn = FALSE; + +#ifdef DOT11_N_SUPPORT +#ifdef DOT11N_DRAFT3 + OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SCAN_2040); + pAd->CommonCfg.BSSCoexist2040.word = 0; + TriEventInit(pAd); + for (i = 0; i < (pAd->ChannelListNum - 1); i++) + { + pAd->ChannelList[i].bEffectedChannel = FALSE; + } +#endif // DOT11N_DRAFT3 // +#endif // DOT11_N_SUPPORT // + + RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff); + RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); + +#ifdef WPA_SUPPLICANT_SUPPORT +#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.WpaSupplicantUP) { + union iwreq_data wrqu; + //send disassociate event to wpa_supplicant + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.flags = RT_DISASSOC_EVENT_FLAG; + wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL); + } +#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // +#endif // WPA_SUPPLICANT_SUPPORT // + +#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT + { + union iwreq_data wrqu; + memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN); + wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); + } +#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // + +#ifdef RT30xx + if (IS_RT3090(pAd)) + { + UINT32 macdata; + // disable MMPS BBP control register + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &ByteValue); + ByteValue &= ~(0x04); //bit 2 + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, ByteValue); + + // disable MMPS MAC control register + RTMP_IO_READ32(pAd, 0x1210, &macdata); + macdata &= ~(0x09); //bit 0, 3 + RTMP_IO_WRITE32(pAd, 0x1210, macdata); + } +#endif // RT30xx // + +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID IterateOnBssTab( + IN PRTMP_ADAPTER pAd) +{ + MLME_START_REQ_STRUCT StartReq; + MLME_JOIN_REQ_STRUCT JoinReq; + ULONG BssIdx; + + // Change the wepstatus to original wepstatus + pAd->StaCfg.WepStatus = pAd->StaCfg.OrigWepStatus; + pAd->StaCfg.PairCipher = pAd->StaCfg.OrigWepStatus; + pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus; + + BssIdx = pAd->MlmeAux.BssIdx; + if (BssIdx < pAd->MlmeAux.SsidBssTab.BssNr) + { + // Check cipher suite, AP must have more secured cipher than station setting + // Set the Pairwise and Group cipher to match the intended AP setting + // We can only connect to AP with less secured cipher setting + if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) + { + pAd->StaCfg.GroupCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.GroupCipher; + + if (pAd->StaCfg.WepStatus == pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipher) + pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipher; + else if (pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipherAux != Ndis802_11WEPDisabled) + pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA.PairCipherAux; + else // There is no PairCipher Aux, downgrade our capability to TKIP + pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled; + } + else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) + { + pAd->StaCfg.GroupCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.GroupCipher; + + if (pAd->StaCfg.WepStatus == pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipher) + pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipher; + else if (pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipherAux != Ndis802_11WEPDisabled) + pAd->StaCfg.PairCipher = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.PairCipherAux; + else // There is no PairCipher Aux, downgrade our capability to TKIP + pAd->StaCfg.PairCipher = Ndis802_11Encryption2Enabled; + + // RSN capability + pAd->StaCfg.RsnCapability = pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.RsnCapability; + } + + // Set Mix cipher flag + pAd->StaCfg.bMixCipher = (pAd->StaCfg.PairCipher == pAd->StaCfg.GroupCipher) ? FALSE : TRUE; + if (pAd->StaCfg.bMixCipher == TRUE) + { + // If mix cipher, re-build RSNIE + RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0); + } + + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - iterate BSS %ld of %d\n", BssIdx, pAd->MlmeAux.SsidBssTab.BssNr)); + JoinParmFill(pAd, &JoinReq, BssIdx); + MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_JOIN_REQ, sizeof(MLME_JOIN_REQ_STRUCT), + &JoinReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_JOIN; + } + else if (pAd->StaCfg.BssType == BSS_ADHOC) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All BSS fail; start a new ADHOC (Ssid=%s)...\n",pAd->MlmeAux.Ssid)); + StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen); + MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq); + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START; + } + else // no more BSS + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All roaming failed, stay @ ch #%d\n", pAd->CommonCfg.Channel)); + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + } +} + +// for re-association only +// IRQL = DISPATCH_LEVEL +VOID IterateOnBssTab2( + IN PRTMP_ADAPTER pAd) +{ + MLME_REASSOC_REQ_STRUCT ReassocReq; + ULONG BssIdx; + BSS_ENTRY *pBss; + + BssIdx = pAd->MlmeAux.RoamIdx; + pBss = &pAd->MlmeAux.RoamTab.BssEntry[BssIdx]; + + if (BssIdx < pAd->MlmeAux.RoamTab.BssNr) + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - iterate BSS %ld of %d\n", BssIdx, pAd->MlmeAux.RoamTab.BssNr)); + + AsicSwitchChannel(pAd, pBss->Channel, FALSE); + AsicLockChannel(pAd, pBss->Channel); + + // reassociate message has the same structure as associate message + AssocParmFill(pAd, &ReassocReq, pBss->Bssid, pBss->CapabilityInfo, + ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount); + MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ, + sizeof(MLME_REASSOC_REQ_STRUCT), &ReassocReq); + + pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC; + } + else // no more BSS + { + DBGPRINT(RT_DEBUG_TRACE, ("CNTL - All fast roaming failed, back to ch #%d\n",pAd->CommonCfg.Channel)); + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + } +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID JoinParmFill( + IN PRTMP_ADAPTER pAd, + IN OUT MLME_JOIN_REQ_STRUCT *JoinReq, + IN ULONG BssIdx) +{ + JoinReq->BssIdx = BssIdx; +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID ScanParmFill( + IN PRTMP_ADAPTER pAd, + IN OUT MLME_SCAN_REQ_STRUCT *ScanReq, + IN CHAR Ssid[], + IN UCHAR SsidLen, + IN UCHAR BssType, + IN UCHAR ScanType) +{ + NdisZeroMemory(ScanReq->Ssid, MAX_LEN_OF_SSID); + ScanReq->SsidLen = SsidLen; + NdisMoveMemory(ScanReq->Ssid, Ssid, SsidLen); + ScanReq->BssType = BssType; + ScanReq->ScanType = ScanType; +} + +#ifdef QOS_DLS_SUPPORT +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID DlsParmFill( + IN PRTMP_ADAPTER pAd, + IN OUT MLME_DLS_REQ_STRUCT *pDlsReq, + IN PRT_802_11_DLS pDls, + IN USHORT reason) +{ + pDlsReq->pDLS = pDls; + pDlsReq->Reason = reason; +} +#endif // QOS_DLS_SUPPORT // + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID StartParmFill( + IN PRTMP_ADAPTER pAd, + IN OUT MLME_START_REQ_STRUCT *StartReq, + IN CHAR Ssid[], + IN UCHAR SsidLen) +{ + ASSERT(SsidLen <= MAX_LEN_OF_SSID); + NdisMoveMemory(StartReq->Ssid, Ssid, SsidLen); + StartReq->SsidLen = SsidLen; +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +VOID AuthParmFill( + IN PRTMP_ADAPTER pAd, + IN OUT MLME_AUTH_REQ_STRUCT *AuthReq, + IN PUCHAR pAddr, + IN USHORT Alg) +{ + COPY_MAC_ADDR(AuthReq->Addr, pAddr); + AuthReq->Alg = Alg; + AuthReq->Timeout = AUTH_TIMEOUT; +} + +/* + ========================================================================== + Description: + + IRQL = DISPATCH_LEVEL + + ========================================================================== + */ + + +#ifdef RT2870 + +VOID MlmeCntlConfirm( + IN PRTMP_ADAPTER pAd, + IN ULONG MsgType, + IN USHORT Msg) +{ + MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MsgType, sizeof(USHORT), &Msg); +} + +VOID ComposePsPoll( + IN PRTMP_ADAPTER pAd) +{ + PTXINFO_STRUC pTxInfo; + PTXWI_STRUC pTxWI; + + DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n")); + NdisZeroMemory(&pAd->PsPollFrame, sizeof(PSPOLL_FRAME)); + + pAd->PsPollFrame.FC.PwrMgmt = 0; + pAd->PsPollFrame.FC.Type = BTYPE_CNTL; + pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL; + pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000; + COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid); + COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress); + + RTMPZeroMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0], 100); + pTxInfo = (PTXINFO_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0]; + RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(PSPOLL_FRAME)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE); + pTxWI = (PTXWI_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE]; + RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(PSPOLL_FRAME)), + 0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit); + RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->PsPollFrame, sizeof(PSPOLL_FRAME)); + // Append 4 extra zero bytes. + pAd->PsPollContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4; +} + +// IRQL = DISPATCH_LEVEL +VOID ComposeNullFrame( + IN PRTMP_ADAPTER pAd) +{ + PTXINFO_STRUC pTxInfo; + PTXWI_STRUC pTxWI; + + NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11)); + pAd->NullFrame.FC.Type = BTYPE_DATA; + pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC; + pAd->NullFrame.FC.ToDs = 1; + COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid); + COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress); + COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid); + RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], 100); + pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0]; + RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE); + pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE]; + RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)), + 0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit); + RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11)); + pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4; +} +#endif // RT2870 // + + +/* + ========================================================================== + Description: + Pre-build a BEACON frame in the shared memory + + IRQL = PASSIVE_LEVEL + IRQL = DISPATCH_LEVEL + + ========================================================================== +*/ +ULONG MakeIbssBeacon( + IN PRTMP_ADAPTER pAd) +{ + UCHAR DsLen = 1, IbssLen = 2; + UCHAR LocalErpIe[3] = {IE_ERP, 1, 0x04}; + HEADER_802_11 BcnHdr; + USHORT CapabilityInfo; + LARGE_INTEGER FakeTimestamp; + ULONG FrameLen = 0; + PTXWI_STRUC pTxWI = &pAd->BeaconTxWI; + CHAR *pBeaconFrame = pAd->BeaconBuf; + BOOLEAN Privacy; + UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES]; + UCHAR SupRateLen = 0; + UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES]; + UCHAR ExtRateLen = 0; + UCHAR RSNIe = IE_WPA; + + if ((pAd->CommonCfg.PhyMode == PHY_11B) && (pAd->CommonCfg.Channel <= 14)) + { + SupRate[0] = 0x82; // 1 mbps + SupRate[1] = 0x84; // 2 mbps + SupRate[2] = 0x8b; // 5.5 mbps + SupRate[3] = 0x96; // 11 mbps + SupRateLen = 4; + ExtRateLen = 0; + } + else if (pAd->CommonCfg.Channel > 14) + { + SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate + SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps + SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate + SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps + SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate + SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps + SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps + SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps + SupRateLen = 8; + ExtRateLen = 0; + + // + // Also Update MlmeRate & RtsRate for G only & A only + // + pAd->CommonCfg.MlmeRate = RATE_6; + pAd->CommonCfg.RtsRate = RATE_6; + pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; + pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; + pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_OFDM; + pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; + } + else + { + SupRate[0] = 0x82; // 1 mbps + SupRate[1] = 0x84; // 2 mbps + SupRate[2] = 0x8b; // 5.5 mbps + SupRate[3] = 0x96; // 11 mbps + SupRateLen = 4; + + ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps, + ExtRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps + ExtRate[2] = 0x18; // 12 mbps, in units of 0.5 Mbps, + ExtRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps + ExtRate[4] = 0x30; // 24 mbps, in units of 0.5 Mbps, + ExtRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps + ExtRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps + ExtRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps + ExtRateLen = 8; + } + + pAd->StaActive.SupRateLen = SupRateLen; + NdisMoveMemory(pAd->StaActive.SupRate, SupRate, SupRateLen); + pAd->StaActive.ExtRateLen = ExtRateLen; + NdisMoveMemory(pAd->StaActive.ExtRate, ExtRate, ExtRateLen); + + // compose IBSS beacon frame + MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->CommonCfg.Bssid); + Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) || + (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) || + (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled); + CapabilityInfo = CAP_GENERATE(0, 1, Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 0, 0); + + MakeOutgoingFrame(pBeaconFrame, &FrameLen, + sizeof(HEADER_802_11), &BcnHdr, + TIMESTAMP_LEN, &FakeTimestamp, + 2, &pAd->CommonCfg.BeaconPeriod, + 2, &CapabilityInfo, + 1, &SsidIe, + 1, &pAd->CommonCfg.SsidLen, + pAd->CommonCfg.SsidLen, pAd->CommonCfg.Ssid, + 1, &SupRateIe, + 1, &SupRateLen, + SupRateLen, SupRate, + 1, &DsIe, + 1, &DsLen, + 1, &pAd->CommonCfg.Channel, + 1, &IbssIe, + 1, &IbssLen, + 2, &pAd->StaActive.AtimWin, + END_OF_ARGS); + + // add ERP_IE and EXT_RAE IE of in 802.11g + if (ExtRateLen) + { + ULONG tmp; + + MakeOutgoingFrame(pBeaconFrame + FrameLen, &tmp, + 3, LocalErpIe, + 1, &ExtRateIe, + 1, &ExtRateLen, + ExtRateLen, ExtRate, + END_OF_ARGS); + FrameLen += tmp; + } + + // If adhoc secruity is set for WPA-None, append the cipher suite IE + if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) + { + ULONG tmp; + RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0); + + MakeOutgoingFrame(pBeaconFrame + FrameLen, &tmp, + 1, &RSNIe, + 1, &pAd->StaCfg.RSNIE_Len, + pAd->StaCfg.RSNIE_Len, pAd->StaCfg.RSN_IE, + END_OF_ARGS); + FrameLen += tmp; + } + +#ifdef DOT11_N_SUPPORT + if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)) + { + ULONG TmpLen; + UCHAR HtLen, HtLen1; + +#ifdef RT_BIG_ENDIAN + HT_CAPABILITY_IE HtCapabilityTmp; + ADD_HT_INFO_IE addHTInfoTmp; + USHORT b2lTmp, b2lTmp2; +#endif + + // add HT Capability IE + HtLen = sizeof(pAd->CommonCfg.HtCapability); + HtLen1 = sizeof(pAd->CommonCfg.AddHTInfo); +#ifndef RT_BIG_ENDIAN + MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen, + 1, &HtCapIe, + 1, &HtLen, + HtLen, &pAd->CommonCfg.HtCapability, + 1, &AddHtInfoIe, + 1, &HtLen1, + HtLen1, &pAd->CommonCfg.AddHTInfo, + END_OF_ARGS); +#else + NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen); + *(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo)); + *(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo)); + + NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, HtLen1); + *(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2)); + *(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3)); + + MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen, + 1, &HtCapIe, + 1, &HtLen, + HtLen, &HtCapabilityTmp, + 1, &AddHtInfoIe, + 1, &HtLen1, + HtLen1, &addHTInfoTmp, + END_OF_ARGS); +#endif + FrameLen += TmpLen; + } +#endif // DOT11_N_SUPPORT // + + //beacon use reserved WCID 0xff + if (pAd->CommonCfg.Channel > 14) + { + RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, 0xff, FrameLen, + PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit); + } + else + { + // Set to use 1Mbps for Adhoc beacon. + HTTRANSMIT_SETTING Transmit; + Transmit.word = 0; + RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, 0xff, FrameLen, + PID_MGMT, PID_BEACON, RATE_1, IFS_HTTXOP, FALSE, &Transmit); + } + +#ifdef RT_BIG_ENDIAN + RTMPFrameEndianChange(pAd, pBeaconFrame, DIR_WRITE, FALSE); + RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI); +#endif + + DBGPRINT(RT_DEBUG_TRACE, ("MakeIbssBeacon (len=%ld), SupRateLen=%d, ExtRateLen=%d, Channel=%d, PhyMode=%d\n", + FrameLen, SupRateLen, ExtRateLen, pAd->CommonCfg.Channel, pAd->CommonCfg.PhyMode)); + return FrameLen; +} + + |