diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-19 17:48:32 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-19 17:48:32 -0700 |
commit | fb20871a54961b82d35303b43452928186c1361d (patch) | |
tree | 1beeb39e45eda1c8b5893090904b583fceeb07ef /drivers/staging/rtl8192su/r8192S_phy.c | |
parent | bee89ab228e6f51c4ddd3481b9bd491859a8ee7b (diff) | |
parent | c7a5d70796379e3d51d0c652fbe1634b81d3bbd5 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (342 commits)
Staging: comedi: fix build errors
Staging: udlfb: update to version 0.2.3
Staging: udlfb: fix some sparse warnings.
Staging: udlfb: clean up checkpatch warnings in udlfb.c
Staging: udlfb: clean up checkpatch warnings in udlfb.h
Staging: udlfb: add udlfb driver to build
Staging: add udlfb driver
Staging: pata_rdc: remove pointless comments
Staging: pata_rdc: remove DRIVER macros
Staging: pata_rdc: remove dbgprintf macro
Staging: pata_rdc: remove broken flag
Staging: pata_rdc: fix build warnings
Staging: pata_rdc: use PCI_DEVICE
Staging: pata_rdc: remove function prototypes
Staging: pata_rdc: coding style fixes
Staging: pata_rdc: convert code to work in 2.6.29
Staging: pata_rdc: add driver to the build system
Staging: add pata_rdc driver
Staging: remove obsolete serqt_usb driver
Staging: serqt_usb2 add the driver to the build
...
Diffstat (limited to 'drivers/staging/rtl8192su/r8192S_phy.c')
-rw-r--r-- | drivers/staging/rtl8192su/r8192S_phy.c | 5028 |
1 files changed, 5028 insertions, 0 deletions
diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c new file mode 100644 index 00000000000..99a4051a845 --- /dev/null +++ b/drivers/staging/rtl8192su/r8192S_phy.c @@ -0,0 +1,5028 @@ +/****************************************************************************** + + (c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved. + + Module: hal8192sphy.c + + Note: Merge 92SE/SU PHY config as below + 1. BB register R/W API + 2. RF register R/W API + 3. Initial BB/RF/MAC config by reading BB/MAC/RF txt. + 3. Power setting API + 4. Channel switch API + 5. Initial gain switch API. + 6. Other BB/MAC/RF API. + + Function: PHY: Extern function, phy: local function + + Export: PHY_FunctionName + + Abbrev: NONE + + History: + Data Who Remark + 08/08/2008 MHC 1. Port from 9x series phycfg.c + 2. Reorganize code arch and ad description. + 3. Collect similar function. + 4. Seperate extern/local API. + 08/12/2008 MHC We must merge or move USB PHY relative function later. + 10/07/2008 MHC Add IQ calibration for PHY.(Only 1T2R mode now!!!) + 11/06/2008 MHC Add TX Power index PG file to config in 0xExx register + area to map with EEPROM/EFUSE tx pwr index. + +******************************************************************************/ +#include "r8192U.h" +#include "r8192U_dm.h" +#include "r8192S_rtl6052.h" + +#ifdef RTL8192SU +#include "r8192S_hw.h" +#include "r8192S_phy.h" +#include "r8192S_phyreg.h" +#include "r8192SU_HWImg.h" +//#include "r8192S_FwImgDTM.h" +#else +#include "r8192U_hw.h" +#include "r819xU_phy.h" +#include "r819xU_phyreg.h" +#endif + +#ifdef ENABLE_DOT11D +#include "dot11d.h" +#endif + +/*---------------------------Define Local Constant---------------------------*/ +/* Channel switch:The size of command tables for switch channel*/ +#define MAX_PRECMD_CNT 16 +#define MAX_RFDEPENDCMD_CNT 16 +#define MAX_POSTCMD_CNT 16 +#define MAX_DOZE_WAITING_TIMES_9x 64 + +/*------------------------Define local variable------------------------------*/ +// 2004-05-11 +#ifndef RTL8192SU +static u32 RF_CHANNEL_TABLE_ZEBRA[]={ + 0, + 0x085c,//2412 1 + 0x08dc,//2417 2 + 0x095c,//2422 3 + 0x09dc,//2427 4 + 0x0a5c,//2432 5 + 0x0adc,//2437 6 + 0x0b5c,//2442 7 + 0x0bdc,//2447 8 + 0x0c5c,//2452 9 + 0x0cdc,//2457 10 + 0x0d5c,//2462 11 + 0x0ddc,//2467 12 + 0x0e5c,//2472 13 + //0x0f5c,//2484 + 0x0f72,//2484 //20040810 +}; +#endif + +static u32 +phy_CalculateBitShift(u32 BitMask); +static RT_STATUS +phy_ConfigMACWithHeaderFile(struct net_device* dev); +static void +phy_InitBBRFRegisterDefinition(struct net_device* dev); +static RT_STATUS +phy_BB8192S_Config_ParaFile(struct net_device* dev); +static RT_STATUS +phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType); +static bool +phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE eRFPowerState); +void +SetBWModeCallback8192SUsbWorkItem(struct net_device *dev); +void +SetBWModeCallback8192SUsbWorkItem(struct net_device *dev); +void +SwChnlCallback8192SUsbWorkItem(struct net_device *dev ); +static void +phy_FinishSwChnlNow(struct net_device* dev,u8 channel); +static bool +phy_SwChnlStepByStep( + struct net_device* dev, + u8 channel, + u8 *stage, + u8 *step, + u32 *delay + ); +static RT_STATUS +phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType); +#ifdef RTL8192SE +static u32 phy_FwRFSerialRead( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset); +static u32 phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset); +static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); +static void phy_RFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); +#endif +static long phy_TxPwrIdxToDbm( struct net_device* dev, WIRELESS_MODE WirelessMode, u8 TxPwrIdx); +static u8 phy_DbmToTxPwrIdx( struct net_device* dev, WIRELESS_MODE WirelessMode, long PowerInDbm); +void phy_SetFwCmdIOCallback(struct net_device* dev); + +//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) +#ifdef RTL8192SU +// +// Description: +// Base Band read by 4181 to make sure that operation could be done in unlimited cycle. +// +// Assumption: +// - Only use on RTL8192S USB interface. +// - PASSIVE LEVEL +// +// Created by Roger, 2008.09.06. +// +//use in phy only +u32 phy_QueryUsbBBReg(struct net_device* dev, u32 RegAddr) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 ReturnValue = 0xffffffff; + u8 PollingCnt = 50; + u8 BBWaitCounter = 0; + + + // + // <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here. + // We have to make sure that previous BB I/O has been done. + // 2008.08.20. + // + while(priv->bChangeBBInProgress) + { + BBWaitCounter ++; + RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): Wait 1 ms (%d times)...\n", BBWaitCounter); + msleep(1); // 1 ms + + // Wait too long, return FALSE to avoid to be stuck here. + if((BBWaitCounter > 100) )//||RT_USB_CANNOT_IO(Adapter)) + { + RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): (%d) Wait too logn to query BB!!\n", BBWaitCounter); + return ReturnValue; + } + } + + priv->bChangeBBInProgress = true; + + read_nic_dword(dev, RegAddr); + + do + {// Make sure that access could be done. + if((read_nic_byte(dev, PHY_REG)&HST_RDBUSY) == 0) + break; + }while( --PollingCnt ); + + if(PollingCnt == 0) + { + RT_TRACE(COMP_RF, "Fail!!!phy_QueryUsbBBReg(): RegAddr(%#x) = %#x\n", RegAddr, ReturnValue); + } + else + { + // Data FW read back. + ReturnValue = read_nic_dword(dev, PHY_REG_DATA); + RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): RegAddr(%#x) = %#x, PollingCnt(%d)\n", RegAddr, ReturnValue, PollingCnt); + } + + priv->bChangeBBInProgress = false; + + return ReturnValue; +} + + + +// +// Description: +// Base Band wrote by 4181 to make sure that operation could be done in unlimited cycle. +// +// Assumption: +// - Only use on RTL8192S USB interface. +// - PASSIVE LEVEL +// +// Created by Roger, 2008.09.06. +// +//use in phy only +void +phy_SetUsbBBReg(struct net_device* dev,u32 RegAddr,u32 Data) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 BBWaitCounter = 0; + + RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): RegAddr(%#x) <= %#x\n", RegAddr, Data); + + // + // <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here. + // We have to make sure that previous BB I/O has been done. + // 2008.08.20. + // + while(priv->bChangeBBInProgress) + { + BBWaitCounter ++; + RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): Wait 1 ms (%d times)...\n", BBWaitCounter); + msleep(1); // 1 ms + + if((BBWaitCounter > 100))// || RT_USB_CANNOT_IO(Adapter)) + { + RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): (%d) Wait too logn to query BB!!\n", BBWaitCounter); + return; + } + } + + priv->bChangeBBInProgress = true; + //printk("**************%s: RegAddr:%x Data:%x\n", __FUNCTION__,RegAddr, Data); + write_nic_dword(dev, RegAddr, Data); + + priv->bChangeBBInProgress = false; +} + + + +// +// Description: +// RF read by 4181 to make sure that operation could be done in unlimited cycle. +// +// Assumption: +// - Only use on RTL8192S USB interface. +// - PASSIVE LEVEL +// - RT_RF_OPERATE_SPINLOCK is acquired and keep on holding to the end.FIXLZM +// +// Created by Roger, 2008.09.06. +// +//use in phy only +u32 phy_QueryUsbRFReg( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + //u32 value = 0, ReturnValue = 0; + u32 ReturnValue = 0; + //u32 tmplong,tmplong2; + u8 PollingCnt = 50; + u8 RFWaitCounter = 0; + + + // + // <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here. + // We have to make sure that previous RF I/O has been done. + // 2008.08.20. + // + while(priv->bChangeRFInProgress) + { + //PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + //spin_lock_irqsave(&priv->rf_lock, flags); //LZM,090318 + down(&priv->rf_sem); + + RFWaitCounter ++; + RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): Wait 1 ms (%d times)...\n", RFWaitCounter); + msleep(1); // 1 ms + + if((RFWaitCounter > 100)) //|| RT_USB_CANNOT_IO(Adapter)) + { + RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): (%d) Wait too logn to query BB!!\n", RFWaitCounter); + return 0xffffffff; + } + else + { + //PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + } + } + + priv->bChangeRFInProgress = true; + //PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + + + Offset &= 0x3f; //RF_Offset= 0x00~0x3F + + write_nic_dword(dev, RF_BB_CMD_ADDR, 0xF0000002| + (Offset<<8)| //RF_Offset= 0x00~0x3F + (eRFPath<<16)); //RF_Path = 0(A) or 1(B) + + do + {// Make sure that access could be done. + if(read_nic_dword(dev, RF_BB_CMD_ADDR) == 0) + break; + }while( --PollingCnt ); + + // Data FW read back. + ReturnValue = read_nic_dword(dev, RF_BB_CMD_DATA); + + //PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + //spin_unlock_irqrestore(&priv->rf_lock, flags); //LZM,090318 + up(&priv->rf_sem); + priv->bChangeRFInProgress = false; + + RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): eRFPath(%d), Offset(%#x) = %#x\n", eRFPath, Offset, ReturnValue); + + return ReturnValue; + +} + + +// +// Description: +// RF wrote by 4181 to make sure that operation could be done in unlimited cycle. +// +// Assumption: +// - Only use on RTL8192S USB interface. +// - PASSIVE LEVEL +// - RT_RF_OPERATE_SPINLOCK is acquired and keep on holding to the end.FIXLZM +// +// Created by Roger, 2008.09.06. +// +//use in phy only +void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 RegAddr,u32 Data) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + u8 PollingCnt = 50; + u8 RFWaitCounter = 0; + + + // + // <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here. + // We have to make sure that previous BB I/O has been done. + // 2008.08.20. + // + while(priv->bChangeRFInProgress) + { + //PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + //spin_lock_irqsave(&priv->rf_lock, flags); //LZM,090318 + down(&priv->rf_sem); + + RFWaitCounter ++; + RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Wait 1 ms (%d times)...\n", RFWaitCounter); + msleep(1); // 1 ms + + if((RFWaitCounter > 100))// || RT_USB_CANNOT_IO(Adapter)) + { + RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): (%d) Wait too logn to query BB!!\n", RFWaitCounter); + return; + } + else + { + //PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + } + } + + priv->bChangeRFInProgress = true; + //PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + + + RegAddr &= 0x3f; //RF_Offset= 0x00~0x3F + + write_nic_dword(dev, RF_BB_CMD_DATA, Data); + write_nic_dword(dev, RF_BB_CMD_ADDR, 0xF0000003| + (RegAddr<<8)| //RF_Offset= 0x00~0x3F + (eRFPath<<16)); //RF_Path = 0(A) or 1(B) + + do + {// Make sure that access could be done. + if(read_nic_dword(dev, RF_BB_CMD_ADDR) == 0) + break; + }while( --PollingCnt ); + + if(PollingCnt == 0) + { + RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Set RegAddr(%#x) = %#x Fail!!!\n", RegAddr, Data); + } + + //PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK); + //spin_unlock_irqrestore(&priv->rf_lock, flags); //LZM,090318 + up(&priv->rf_sem); + priv->bChangeRFInProgress = false; + +} + +#endif + +/*---------------------Define local function prototype-----------------------*/ + + +/*----------------------------Function Body----------------------------------*/ +// +// 1. BB register R/W API +// +/** +* Function: PHY_QueryBBReg +* +* OverView: Read "sepcific bits" from BB register +* +* Input: +* PADAPTER Adapter, +* u32 RegAddr, //The target address to be readback +* u32 BitMask //The target bit position in the target address +* //to be readback +* Output: None +* Return: u32 Data //The readback register value +* Note: This function is equal to "GetRegSetting" in PHY programming guide +*/ +//use phy dm core 8225 8256 6052 +//u32 PHY_QueryBBReg(struct net_device* dev,u32 RegAddr, u32 BitMask) +u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask) +{ + + u32 ReturnValue = 0, OriginalValue, BitShift; + +#if (DISABLE_BB_RF == 1) + return 0; +#endif + + RT_TRACE(COMP_RF, "--->PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x)\n", RegAddr, BitMask); + + // + // <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use + // 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in + // infinite cycle. + // 2008.09.06. + // +//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) +#ifdef RTL8192SU + if(IS_BB_REG_OFFSET_92S(RegAddr)) + { + //if(RT_USB_CANNOT_IO(Adapter)) return FALSE; + + if((RegAddr & 0x03) != 0) + { + printk("%s: Not DWORD alignment!!\n", __FUNCTION__); + return 0; + } + + OriginalValue = phy_QueryUsbBBReg(dev, RegAddr); + } + else +#endif + { + OriginalValue = read_nic_dword(dev, RegAddr); + } + + BitShift = phy_CalculateBitShift(BitMask); + ReturnValue = (OriginalValue & BitMask) >> BitShift; + + //RTPRINT(FPHY, PHY_BBR, ("BBR MASK=0x%x Addr[0x%x]=0x%x\n", BitMask, RegAddr, OriginalValue)); + RT_TRACE(COMP_RF, "<---PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x), OriginalValue(%#x)\n", RegAddr, BitMask, OriginalValue); + return (ReturnValue); +} + +/** +* Function: PHY_SetBBReg +* +* OverView: Write "Specific bits" to BB register (page 8~) +* +* Input: +* PADAPTER Adapter, +* u32 RegAddr, //The target address to be modified +* u32 BitMask //The target bit position in the target address +* //to be modified +* u32 Data //The new register value in the target bit position +* //of the target address +* +* Output: None +* Return: None +* Note: This function is equal to "PutRegSetting" in PHY programming guide +*/ +//use phy dm core 8225 8256 +//void PHY_SetBBReg(struct net_device* dev,u32 RegAddr, u32 BitMask, u32 Data ) +void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data) +{ + u32 OriginalValue, BitShift, NewValue; + +#if (DISABLE_BB_RF == 1) + return; +#endif + + RT_TRACE(COMP_RF, "--->PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data); + + // + // <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use + // 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in + // infinite cycle. + // 2008.09.06. + // +//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) +#ifdef RTL8192SU + if(IS_BB_REG_OFFSET_92S(RegAddr)) + { + if((RegAddr & 0x03) != 0) + { + printk("%s: Not DWORD alignment!!\n", __FUNCTION__); + return; + } + + if(BitMask!= bMaskDWord) + {//if not "double word" write + OriginalValue = phy_QueryUsbBBReg(dev, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + NewValue = (((OriginalValue) & (~BitMask))|(Data << BitShift)); + phy_SetUsbBBReg(dev, RegAddr, NewValue); + }else + phy_SetUsbBBReg(dev, RegAddr, Data); + } + else +#endif + { + if(BitMask!= bMaskDWord) + {//if not "double word" write + OriginalValue = read_nic_dword(dev, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + NewValue = (((OriginalValue) & (~BitMask)) | (Data << BitShift)); + write_nic_dword(dev, RegAddr, NewValue); + }else + write_nic_dword(dev, RegAddr, Data); + } + + //RT_TRACE(COMP_RF, "<---PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data); + + return; +} + + +// +// 2. RF register R/W API +// +/** +* Function: PHY_QueryRFReg +* +* OverView: Query "Specific bits" to RF register (page 8~) +* +* Input: +* PADAPTER Adapter, +* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u32 RegAddr, //The target address to be read +* u32 BitMask //The target bit position in the target address +* //to be read +* +* Output: None +* Return: u32 Readback value +* Note: This function is equal to "GetRFRegSetting" in PHY programming guide +*/ +//in dm 8256 and phy +//u32 PHY_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask) +u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask) +{ + u32 Original_Value, Readback_Value, BitShift;//, flags; + struct r8192_priv *priv = ieee80211_priv(dev); + +#if (DISABLE_BB_RF == 1) + return 0; +#endif + + RT_TRACE(COMP_RF, "--->PHY_QueryRFReg(): RegAddr(%#x), eRFPath(%#x), BitMask(%#x)\n", RegAddr, eRFPath,BitMask); + + if (!((priv->rf_pathmap >> eRFPath) & 0x1)) + { + printk("EEEEEError: rfpath off! rf_pathmap=%x eRFPath=%x\n", priv->rf_pathmap, eRFPath); + return 0; + } + + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + { + printk("EEEEEError: not legal rfpath! eRFPath=%x\n", eRFPath); + return 0; + } + + /* 2008/01/17 MH We get and release spin lock when reading RF register. */ + //PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK);FIXLZM + //spin_lock_irqsave(&priv->rf_lock, flags); //YJ,test,090113 + down(&priv->rf_sem); + // + // <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use + // 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in + // infinite cycle. + // 2008.09.06. + // +//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE) +#ifdef RTL8192SU + //if(RT_USB_CANNOT_IO(Adapter)) return FALSE; + Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr); +#else + if (priv->Rf_Mode == RF_OP_By_FW) + { + Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); + } + else + { + Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr); + } +#endif + + BitShift = phy_CalculateBitShift(BitMask); + Readback_Value = (Original_Value & BitMask) >> BitShift; + //spin_unlock_irqrestore(&priv->rf_lock, flags); //YJ,test,090113 + up(&priv->rf_sem); + //PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK); + + //RTPRINT(FPHY, PHY_RFR, ("RFR-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Original_Value)); + + return (Readback_Value); +} + +/** +* Function: PHY_SetRFReg +* +* OverView: Write "Specific bits" to RF register (page 8~) +* +* Input: +* PADAPTER Adapter, +* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u32 RegAddr, //The target address to be modified +* u32 BitMask //The target bit position in the target address +* //to be modified +* u32 Data //The new register Data in the target bit position +* //of the target address +* +* Output: None +* Return: None +* Note: This function is equal to "PutRFRegSetting" in PHY programming guide +*/ +//use phy 8225 8256 +//void PHY_SetRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask,u32 Data ) +void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + u32 Original_Value, BitShift, New_Value;//, flags; +#if (DISABLE_BB_RF == 1) + return; +#endif + + RT_TRACE(COMP_RF, "--->PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n", + RegAddr, BitMask, Data, eRFPath); + + if (!((priv->rf_pathmap >> eRFPath) & 0x1)) + { + printk("EEEEEError: rfpath off! rf_pathmap=%x eRFPath=%x\n", priv->rf_pathmap, eRFPath); + return ; + } + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + { + printk("EEEEEError: not legal rfpath! eRFPath=%x\n", eRFPath); + return; + } + + /* 2008/01/17 MH We get and release spin lock when writing RF register. */ + //PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK); + //spin_lock_irqsave(&priv->rf_lock, flags); //YJ,test,090113 + down(&priv->rf_sem); + // + // <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use + // 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in + // infinite cycle. + // 2008.09.06. + // +//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE) +#ifdef RTL8192SU + //if(RT_USB_CANNOT_IO(Adapter)) return; + + if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only + { + Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + New_Value = (((Original_Value)&(~BitMask))|(Data<< BitShift)); + phy_SetUsbRFReg(dev, eRFPath, RegAddr, New_Value); + } + else + phy_SetUsbRFReg(dev, eRFPath, RegAddr, Data); +#else + if (priv->Rf_Mode == RF_OP_By_FW) + { + //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data); + if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only + { + Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); + + phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value); + } + else + phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data); + } + else + { + //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data); + if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only + { + Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr); + BitShift = phy_CalculateBitShift(BitMask); + New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); + + phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value); + } + else + phy_RFSerialWrite(dev, eRFPath, RegAddr, Data); + + } +#endif + //PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK); + //spin_unlock_irqrestore(&priv->rf_lock, flags); //YJ,test,090113 + up(&priv->rf_sem); + //RTPRINT(FPHY, PHY_RFW, ("RFW-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Data)); + RT_TRACE(COMP_RF, "<---PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n", + RegAddr, BitMask, Data, eRFPath); + +} + +#ifdef RTL8192SE +/*----------------------------------------------------------------------------- + * Function: phy_FwRFSerialRead() + * + * Overview: We support firmware to execute RF-R/W. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 01/21/2008 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +//use in phy only +static u32 +phy_FwRFSerialRead( + struct net_device* dev, + RF90_RADIO_PATH_E eRFPath, + u32 Offset ) +{ + u32 retValue = 0; + //u32 Data = 0; + //u8 time = 0; +#if 0 + //DbgPrint("FW RF CTRL\n\r"); + /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can + not execute the scheme in the initial step. Otherwise, RF-R/W will waste + much time. This is only for site survey. */ + // 1. Read operation need not insert data. bit 0-11 + //Data &= bMask12Bits; + // 2. Write RF register address. Bit 12-19 + Data |= ((Offset&0xFF)<<12); + // 3. Write RF path. bit 20-21 + Data |= ((eRFPath&0x3)<<20); + // 4. Set RF read indicator. bit 22=0 + //Data |= 0x00000; + // 5. Trigger Fw to operate the command. bit 31 + Data |= 0x80000000; + // 6. We can not execute read operation if bit 31 is 1. + while (PlatformIORead4Byte(dev, QPNR)&0x80000000) + { + // If FW can not finish RF-R/W for more than ?? times. We must reset FW. + if (time++ < 100) + { + //DbgPrint("FW not finish RF-R Time=%d\n\r", time); + delay_us(10); + } + else + break; + } + // 7. Execute read operation. + PlatformIOWrite4Byte(dev, QPNR, Data); + // 8. Check if firmawre send back RF content. + while (PlatformIORead4Byte(dev, QPNR)&0x80000000) + { + // If FW can not finish RF-R/W for more than ?? times. We must reset FW. + if (time++ < 100) + { + //DbgPrint("FW not finish RF-W Time=%d\n\r", time); + delay_us(10); + } + else + return (0); + } + retValue = PlatformIORead4Byte(dev, RF_DATA); +#endif + return (retValue); + +} /* phy_FwRFSerialRead */ + +/*----------------------------------------------------------------------------- + * Function: phy_FwRFSerialWrite() + * + * Overview: We support firmware to execute RF-R/W. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 01/21/2008 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +//use in phy only +static void +phy_FwRFSerialWrite( + struct net_device* dev, + RF90_RADIO_PATH_E eRFPath, + u32 Offset, + u32 Data ) +{ +#if 0 + u8 time = 0; + DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data); + /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can + not execute the scheme in the initial step. Otherwise, RF-R/W will waste + much time. This is only for site survey. */ + + // 1. Set driver write bit and 12 bit data. bit 0-11 + //Data &= bMask12Bits; // Done by uper layer. + // 2. Write RF register address. bit 12-19 + Data |= ((Offset&0xFF)<<12); + // 3. Write RF path. bit 20-21 + Data |= ((eRFPath&0x3)<<20); + // 4. Set RF write indicator. bit 22=1 + Data |= 0x400000; + // 5. Trigger Fw to operate the command. bit 31=1 + Data |= 0x80000000; + + // 6. Write operation. We can not write if bit 31 is 1. + while (PlatformIORead4Byte(dev, QPNR)&0x80000000) + { + // If FW can not finish RF-R/W for more than ?? times. We must reset FW. + if (time++ < 100) + { + //DbgPrint("FW not finish RF-W Time=%d\n\r", time); + delay_us(10); + } + else + break; + } + // 7. No matter check bit. We always force the write. Because FW will + // not accept the command. + PlatformIOWrite4Byte(dev, QPNR, Data); + /* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware + to finish RF write operation. */ + /* 2008/01/17 MH We support delay in firmware side now. */ + //delay_us(20); +#endif +} /* phy_FwRFSerialWrite */ + +/** +* Function: phy_RFSerialRead +* +* OverView: Read regster from RF chips +* +* Input: +* PADAPTER Adapter, +* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u32 Offset, //The target address to be read +* +* Output: None +* Return: u32 reback value +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() +*/ +//use in phy only +static u32 phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset) +{ + + u32 retValue = 0; + struct r8192_priv *priv = ieee80211_priv(dev); + BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + u32 NewOffset; + u8 RfPiEnable=0; + + + // + // Make sure RF register offset is correct + // + Offset &= 0x3f; + + // + // Switch page for 8256 RF IC + // + if( priv->rf_chip == RF_8256 || + priv->rf_chip == RF_8225 || + priv->rf_chip == RF_6052) + { + //analog to digital off, for protection + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] + + if(Offset>=31) + { + priv->RFReadPageCnt[2]++;//cosa add for debug + priv->RfReg0Value[eRFPath] |= 0x140; + + // Switch to Reg_Mode2 for Reg31~45 + rtl8192_setBBreg(dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16) ); + + // Modified Offset + NewOffset = Offset - 30; + + }else if(Offset>=16) + { + priv->RFReadPageCnt[1]++;//cosa add for debug + priv->RfReg0Value[eRFPath] |= 0x100; + priv->RfReg0Value[eRFPath] &= (~0x40); + + // Switch to Reg_Mode1 for Reg16~30 + rtl8192_setBBreg(dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16) ); + + // Modified Offset + NewOffset = Offset - 15; + } + else + { + priv->RFReadPageCnt[0]++;//cosa add for debug + NewOffset = Offset; + } + } + else + NewOffset = Offset; + + // + // Put desired read address to LSSI control register + // + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset); + + // + // Issue a posedge trigger + // + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); + + // TODO: we should not delay such a long time. Ask help from SD3 + mdelay(1); + + retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); + + // Switch back to Reg_Mode0; + if( priv->rf_chip == RF_8256 || + priv->rf_chip == RF_8225 || + priv->rf_chip == RF_0222D) + { + if (Offset >= 0x10) + { + priv->RfReg0Value[eRFPath] &= 0xebf; + + rtl8192_setBBreg( + dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16) ); + } + + //analog to digital on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8] + } + + return retValue; +} + + + +/** +* Function: phy_RFSerialWrite +* +* OverView: Write data to RF register (page 8~) +* +* Input: +* PADAPTER Adapter, +* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u32 Offset, //The target address to be read +* u32 Data //The new register Data in the target bit position +* //of the target to be read +* +* Output: None +* Return: None +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() + * + * Note: For RF8256 only + * The total count of RTL8256(Zebra4) register is around 36 bit it only employs + * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) + * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration + * programming guide" for more details. + * Thus, we define a sub-finction for RTL8526 register address conversion + * =========================================================== + * Register Mode RegCTL[1] RegCTL[0] Note + * (Reg00[12]) (Reg00[10]) + * =========================================================== + * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) + * ------------------------------------------------------------------ +*/ +////use in phy only +static void +phy_RFSerialWrite( + struct net_device* dev, + RF90_RADIO_PATH_E eRFPath, + u32 Offset, + u32 Data + ) +{ + u32 DataAndAddr = 0; + struct r8192_priv *priv = ieee80211_priv(dev); + BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + u32 NewOffset; + + Offset &= 0x3f; + + // Shadow Update + PHY_RFShadowWrite(dev, eRFPath, Offset, Data); + + + // Switch page for 8256 RF IC + if( priv->rf_chip == RF_8256 || + priv->rf_chip == RF_8225 || + priv->rf_chip == RF_0222D) + { + //analog to digital off, for protection + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] + + if(Offset>=31) + { + priv->RFWritePageCnt[2]++;//cosa add for debug + priv->RfReg0Value[eRFPath] |= 0x140; + + rtl8192_setBBreg(dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16) ); + + NewOffset = Offset - 30; + + }else if(Offset>=16) + { + priv->RFWritePageCnt[1]++;//cosa add for debug + priv->RfReg0Value[eRFPath] |= 0x100; + priv->RfReg0Value[eRFPath] &= (~0x40); + + + rtl8192_setBBreg(dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16) ); + + NewOffset = Offset - 15; + } + else + { + priv->RFWritePageCnt[0]++;//cosa add for debug + NewOffset = Offset; + } + } + else + NewOffset = Offset; + + // + // Put write addr in [5:0] and write data in [31:16] + // + DataAndAddr = (Data<<16) | (NewOffset&0x3f); + + // + // Write Operation + // + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); + + + if(Offset==0x0) + priv->RfReg0Value[eRFPath] = Data; + + // Switch back to Reg_Mode0; + if( priv->rf_chip == RF_8256 || + priv->rf_chip == RF_8225 || + priv->rf_chip == RF_0222D) + { + if (Offset >= 0x10) + { + if(Offset != 0) + { + priv->RfReg0Value[eRFPath] &= 0xebf; + rtl8192_setBBreg( + dev, + pPhyReg->rf3wireOffset, + bMaskDWord, + (priv->RfReg0Value[eRFPath] << 16) ); + } + } + //analog to digital on + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8] + } + +} +#else +/** +* Function: phy_RFSerialRead +* +* OverView: Read regster from RF chips +* +* Input: +* PADAPTER Adapter, +* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u4Byte Offset, //The target address to be read +* +* Output: None +* Return: u4Byte reback value +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() +*/ +#if 0 +static u32 +phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset) +{ + + u32 retValue = 0; + struct r8192_priv *priv = ieee80211_priv(dev); + BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + u32 NewOffset; + //u32 value = 0; + u32 tmplong,tmplong2; + u32 RfPiEnable=0; +#if 0 + if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs + return retValue; + if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs + return retValue; +#endif + // + // Make sure RF register offset is correct + // + Offset &= 0x3f; + + // + // Switch page for 8256 RF IC + // + NewOffset = Offset; + + // For 92S LSSI Read RFLSSIRead + // For RF A/B write 0x824/82c(does not work in the future) + // We must use 0x824 for RF A and B to execute read trigger + tmplong = rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord); + tmplong2 = rtl8192_QueryBBReg(dev, pPhyReg->rfHSSIPara2, bMaskDWord); + tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; //T65 RF + + rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge)); + mdelay(1); + + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2); + mdelay(1); + + rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong|bLSSIReadEdge); + mdelay(1); + + if(eRFPath == RF90_PATH_A) + RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter1, BIT8); + else if(eRFPath == RF90_PATH_B) + RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XB_HSSIParameter1, BIT8); + + if(RfPiEnable) + { // Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF + retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData); + //DbgPrint("Readback from RF-PI : 0x%x\n", retValue); + } + else + { //Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF + retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); + //DbgPrint("Readback from RF-SI : 0x%x\n", retValue); + } + //RTPRINT(FPHY, PHY_RFR, ("RFR-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rfLSSIReadBack, retValue)); + + return retValue; + +} +4 + + +/** +* Function: phy_RFSerialWrite +* +* OverView: Write data to RF register (page 8~) +* +* Input: +* PADAPTER Adapter, +* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D +* u4Byte Offset, //The target address to be read +* u4Byte Data //The new register Data in the target bit position +* //of the target to be read +* +* Output: None +* Return: None +* Note: Threre are three types of serial operations: +* 1. Software serial write +* 2. Hardware LSSI-Low Speed Serial Interface +* 3. Hardware HSSI-High speed +* serial write. Driver need to implement (1) and (2). +* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() + * + * Note: For RF8256 only + * The total count of RTL8256(Zebra4) register is around 36 bit it only employs + * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) + * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration + * programming guide" for more details. + * Thus, we define a sub-finction for RTL8526 register address conversion + * =========================================================== + * Register Mode RegCTL[1] RegCTL[0] Note + * (Reg00[12]) (Reg00[10]) + * =========================================================== + * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) + * ------------------------------------------------------------------ + * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) + * ------------------------------------------------------------------ + * + * 2008/09/02 MH Add 92S RF definition + * + * + * +*/ +static void +phy_RFSerialWrite(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset,u32 Data) +{ + u32 DataAndAddr = 0; + struct r8192_priv *priv = ieee80211_priv(dev); + BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + u32 NewOffset; + +#if 0 + //<Roger_TODO> We should check valid regs for RF_6052 case. + if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs + return; + if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs + return; +#endif + + Offset &= 0x3f; + + // + // Shadow Update + // + PHY_RFShadowWrite(dev, eRFPath, Offset, Data); + + // + // Switch page for 8256 RF IC + // + NewOffset = Offset; + + // + // Put write addr in [5:0] and write data in [31:16] + // + //DataAndAddr = (Data<<16) | (NewOffset&0x3f); + DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; // T65 RF + + // + // Write Operation + // + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); + //RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr)); + +} +#endif +#endif + +/** +* Function: phy_CalculateBitShift +* +* OverView: Get shifted position of the BitMask +* +* Input: +* u32 BitMask, +* +* Output: none +* Return: u32 Return the shift bit bit position of the mask +*/ +//use in phy only +static u32 phy_CalculateBitShift(u32 BitMask) +{ + u32 i; + + for(i=0; i<=31; i++) + { + if ( ((BitMask>>i) & 0x1 ) == 1) + break; + } + + return (i); +} + + +// +// 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt. +// +/*----------------------------------------------------------------------------- + * Function: PHY_MACConfig8192S + * + * Overview: Condig MAC by header file or parameter file. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 08/12/2008 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ +//adapter_start +extern bool PHY_MACConfig8192S(struct net_device* dev) +{ + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + + // + // Config MAC + // +#if RTL8190_Download_Firmware_From_Header + rtStatus = phy_ConfigMACWithHeaderFile(dev); +#else + // Not make sure EEPROM, add later + RT_TRACE(COMP_INIT, "Read MACREG.txt\n"); + //rtStatus = phy_ConfigMACWithParaFile(dev, RTL819X_PHY_MACREG);// lzm del it temp +#endif + return (rtStatus == RT_STATUS_SUCCESS) ? true:false; + +} + +//adapter_start +extern bool +PHY_BBConfig8192S(struct net_device* dev) +{ + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + + u8 PathMap = 0, index = 0, rf_num = 0; + struct r8192_priv *priv = ieee80211_priv(dev); + phy_InitBBRFRegisterDefinition(dev); + + // + // Config BB and AGC + // + //switch( Adapter->MgntInfo.bRegHwParaFile ) + //{ + // case 0: + // phy_BB8190_Config_HardCode(dev); + // break; + + // case 1: + rtStatus = phy_BB8192S_Config_ParaFile(dev); + // break; + + // case 2: + // Partial Modify. + // phy_BB8190_Config_HardCode(dev); + // phy_BB8192S_Config_ParaFile(dev); + // break; + + // default: + // phy_BB8190_Config_HardCode(dev); + // break; + //} + PathMap = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_TxInfo, 0xf) | + rtl8192_QueryBBReg(dev, rOFDM0_TRxPathEnable, 0xf)); + priv->rf_pathmap = PathMap; + for(index = 0; index<4; index++) + { + if((PathMap>>index)&0x1) + rf_num++; + } + + if((priv->rf_type==RF_1T1R && rf_num!=1) || + (priv->rf_type==RF_1T2R && rf_num!=2) || + (priv->rf_type==RF_2T2R && rf_num!=2) || + (priv->rf_type==RF_2T2R_GREEN && rf_num!=2) || + (priv->rf_type==RF_2T4R && rf_num!=4)) + { + RT_TRACE( COMP_INIT, "PHY_BBConfig8192S: RF_Type(%x) does not match RF_Num(%x)!!\n", priv->rf_type, rf_num); + } + return (rtStatus == RT_STATUS_SUCCESS) ? 1:0; +} + +//adapter_start +extern bool +PHY_RFConfig8192S(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + + //Set priv->rf_chip = RF_8225 to do real PHY FPGA initilization + + //<Roger_EXP> We assign RF type here temporally. 2008.09.12. + priv->rf_chip = RF_6052; + + // + // RF config + // + switch(priv->rf_chip) + { + case RF_8225: + case RF_6052: + rtStatus = PHY_RF6052_Config(dev); + break; + + case RF_8256: + //rtStatus = PHY_RF8256_Config(dev); + break; + + case RF_8258: + break; + + case RF_PSEUDO_11N: + //rtStatus = PHY_RF8225_Config(dev); + break; + default: + break; + } + + return (rtStatus == RT_STATUS_SUCCESS) ? 1:0; +} + + +// Joseph test: new initialize order!! +// Test only!! This part need to be re-organized. +// Now it is just for 8256. +//use in phy only +#ifdef TO_DO_LIST +static RT_STATUS +phy_BB8190_Config_HardCode(struct net_device* dev) +{ + //RT_ASSERT(FALSE, ("This function is not implement yet!! \n")); + return RT_STATUS_SUCCESS; +} +#endif + +/*----------------------------------------------------------------------------- + * Function: phy_SetBBtoDiffRFWithHeaderFile() + * + * Overview: This function + * + * + * Input: PADAPTER Adapter + * u1Byte ConfigType 0 => PHY_CONFIG + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * When Who Remark + * 2008/11/10 tynli + * use in phy only + *---------------------------------------------------------------------------*/ +static RT_STATUS +phy_SetBBtoDiffRFWithHeaderFile(struct net_device* dev, u8 ConfigType) +{ + int i; + struct r8192_priv *priv = ieee80211_priv(dev); + u32* Rtl819XPHY_REGArraytoXTXR_Table; + u16 PHY_REGArraytoXTXRLen; + +//#if (HAL_CODE_BASE != RTL8192_S) + + if(priv->rf_type == RF_1T1R) + { + Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to1T1R_Array; + PHY_REGArraytoXTXRLen = PHY_ChangeTo_1T1RArrayLength; + } + else if(priv->rf_type == RF_1T2R) + { + Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to1T2R_Array; + PHY_REGArraytoXTXRLen = PHY_ChangeTo_1T2RArrayLength; + } + //else if(priv->rf_type == RF_2T2R || priv->rf_type == RF_2T2R_GREEN) + //{ + // Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to2T2R_Array; + // PHY_REGArraytoXTXRLen = PHY_ChangeTo_2T2RArrayLength; + //} + else + { + return RT_STATUS_FAILURE; + } + + if(ConfigType == BaseBand_Config_PHY_REG) + { + for(i=0;i<PHY_REGArraytoXTXRLen;i=i+3) + { + if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfe) + mdelay(50); + else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfd) + mdelay(5); + else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfc) + mdelay(1); + else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfb) + udelay(50); + else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfa) + udelay(5); + else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xf9) + udelay(1); + rtl8192_setBBreg(dev, Rtl819XPHY_REGArraytoXTXR_Table[i], Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]); + //RT_TRACE(COMP_SEND, + //"The Rtl819XPHY_REGArraytoXTXR_Table[0] is %lx Rtl819XPHY_REGArraytoXTXR_Table[1] is %lx Rtl819XPHY_REGArraytoXTXR_Table[2] is %lx \n", + //Rtl819XPHY_REGArraytoXTXR_Table[i],Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]); + } + } + else { + RT_TRACE(COMP_SEND, "phy_SetBBtoDiffRFWithHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n"); + } +//#endif // #if (HAL_CODE_BASE != RTL8192_S) + return RT_STATUS_SUCCESS; +} + + +//use in phy only +static RT_STATUS +phy_BB8192S_Config_ParaFile(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + //u8 u2RegValue; + //u16 u4RegValue; + //char szBBRegFile[] = RTL819X_PHY_REG; + //char szBBRegFile1T2R[] = RTL819X_PHY_REG_1T2R; + //char szBBRegPgFile[] = RTL819X_PHY_REG_PG; + //char szAGCTableFile[] = RTL819X_AGC_TAB; + //char szBBRegto1T1RFile[] = RTL819X_PHY_REG_to1T1R; + //char szBBRegto1T2RFile[] = RTL819X_PHY_REG_to1T2R; + + RT_TRACE(COMP_INIT, "==>phy_BB8192S_Config_ParaFile\n"); + + // + // 1. Read PHY_REG.TXT BB INIT!! + // We will seperate as 1T1R/1T2R/1T2R_GREEN/2T2R + // +#if RTL8190_Download_Firmware_From_Header + if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R || + priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN) + { + rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_PHY_REG); + if(priv->rf_type != RF_2T2R && priv->rf_type != RF_2T2R_GREEN) + {//2008.11.10 Added by tynli. The default PHY_REG.txt we read is for 2T2R, + //so we should reconfig BB reg with the right PHY parameters. + rtStatus = phy_SetBBtoDiffRFWithHeaderFile(dev,BaseBand_Config_PHY_REG); + } + }else + rtStatus = RT_STATUS_FAILURE; +#else + RT_TRACE(COMP_INIT, "RF_Type == %d\n", priv->rf_type); + // No matter what kind of RF we always read PHY_REG.txt. We must copy different + // type of parameter files to phy_reg.txt at first. + if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R || + priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN) + { + rtStatus = phy_ConfigBBWithParaFile(dev, (char* )&szBBRegFile); + if(priv->rf_type != RF_2T2R && priv->rf_type != RF_2T2R_GREEN) + {//2008.11.10 Added by tynli. The default PHY_REG.txt we read is for 2T2R, + //so we should reconfig BB reg with the right PHY parameters. + if(priv->rf_type == RF_1T1R) + rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T1RFile); + else if(priv->rf_type == RF_1T2R) + rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T2RFile); + } + + }else + rtStatus = RT_STATUS_FAILURE; +#endif + + if(rtStatus != RT_STATUS_SUCCESS){ + RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!"); + goto phy_BB8190_Config_ParaFile_Fail; + } + + // + // 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt + // + if (priv->AutoloadFailFlag == false) + { +#if RTL8190_Download_Firmware_From_Header + rtStatus = phy_ConfigBBWithPgHeaderFile(dev,BaseBand_Config_PHY_REG); +#else + rtStatus = phy_ConfigBBWithPgParaFile(dev, (char* )&szBBRegPgFile); +#endif + } + if(rtStatus != RT_STATUS_SUCCESS){ + RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!"); + goto phy_BB8190_Config_ParaFile_Fail; + } + + // + // 3. BB AGC table Initialization + // +#if RTL8190_Download_Firmware_From_Header + rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_AGC_TAB); +#else + RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile AGC_TAB.txt\n"); + rtStatus = phy_ConfigBBWithParaFile(Adapter, (char* )&szAGCTableFile); +#endif + + if(rtStatus != RT_STATUS_SUCCESS){ + printk( "phy_BB8192S_Config_ParaFile():AGC Table Fail\n"); + goto phy_BB8190_Config_ParaFile_Fail; + } + + +#if 0 // 2008/08/18 MH Disable for 92SE + if(pHalData->VersionID > VERSION_8190_BD) + { + //if(pHalData->RF_Type == RF_2T4R) + //{ + // Antenna gain offset from B/C/D to A + u4RegValue = ( pHalData->AntennaTxPwDiff[2]<<8 | + pHalData->AntennaTxPwDiff[1]<<4 | + pHalData->AntennaTxPwDiff[0]); + //} + //else + //u4RegValue = 0; + + PHY_SetBBReg(dev, rFPGA0_TxGainStage, + (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue); + + // CrystalCap + // Simulate 8192??? + u4RegValue = pHalData->CrystalCap; + PHY_SetBBReg(dev, rFPGA0_AnalogParameter1, bXtalCap92x, u4RegValue); + // Simulate 8190?? + //u4RegValue = ((pHalData->CrystalCap & 0xc)>>2); // bit2~3 of crystal cap + //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, bXtalCap23, u4RegValue); + + } +#endif + + // Check if the CCK HighPower is turned ON. + // This is used to calculate PWDB. + priv->bCckHighPower = (bool)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200)); + + +phy_BB8190_Config_ParaFile_Fail: + return rtStatus; +} + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigMACWithHeaderFile() + * + * Overview: This function read BB parameters from Header file we gen, and do register + * Read/Write + * + * Input: PADAPTER Adapter + * char* pFileName + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + * Note: The format of MACPHY_REG.txt is different from PHY and RF. + * [Register][Mask][Value] + *---------------------------------------------------------------------------*/ +//use in phy only +static RT_STATUS +phy_ConfigMACWithHeaderFile(struct net_device* dev) +{ + u32 i = 0; + u32 ArrayLength = 0; + u32* ptrArray; + //struct r8192_priv *priv = ieee80211_priv(dev); + +//#if (HAL_CODE_BASE != RTL8192_S) + /*if(Adapter->bInHctTest) + { + RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_ArrayDTM\n")); + ArrayLength = MACPHY_ArrayLengthDTM; + ptrArray = Rtl819XMACPHY_ArrayDTM; + } + else if(pHalData->bTXPowerDataReadFromEEPORM) + { +// RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_Array_PG\n")); +// ArrayLength = MACPHY_Array_PGLength; +// ptrArray = Rtl819XMACPHY_Array_PG; + + }else*/ + { //2008.11.06 Modified by tynli. + RT_TRACE(COMP_INIT, "Read Rtl819XMACPHY_Array\n"); + ArrayLength = MAC_2T_ArrayLength; + ptrArray = Rtl819XMAC_Array; + } + + /*for(i = 0 ;i < ArrayLength;i=i+3){ + RT_TRACE(COMP_SEND, DBG_LOUD, ("The Rtl819XMACPHY_Array[0] is %lx Rtl819XMACPHY_Array[1] is %lx Rtl819XMACPHY_Array[2] is %lx\n",ptrArray[i], ptrArray[i+1], ptrArray[i+2])); + if(ptrArray[i] == 0x318) + { + ptrArray[i+2] = 0x00000800; + //DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n", + // ptrArray[i], ptrArray[i+1], ptrArray[i+2]); + } + PHY_SetBBReg(Adapter, ptrArray[i], ptrArray[i+1], ptrArray[i+2]); + }*/ + for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column + write_nic_byte(dev, ptrArray[i], (u8)ptrArray[i+1]); + } +//#endif + return RT_STATUS_SUCCESS; +} + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithHeaderFile() + * + * Overview: This function read BB parameters from general file format, and do register + * Read/Write + * + * Input: PADAPTER Adapter + * u8 ConfigType 0 => PHY_CONFIG + * 1 =>AGC_TAB + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + *---------------------------------------------------------------------------*/ +//use in phy only +static RT_STATUS +phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType) +{ + int i; + //u8 ArrayLength; + u32* Rtl819XPHY_REGArray_Table; + u32* Rtl819XAGCTAB_Array_Table; + u16 PHY_REGArrayLen, AGCTAB_ArrayLen; + //struct r8192_priv *priv = ieee80211_priv(dev); +//#if (HAL_CODE_BASE != RTL8192_S) + /*if(Adapter->bInHctTest) + { + + AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM; + Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM; + + if(pHalData->RF_Type == RF_2T4R) + { + PHY_REGArrayLen = PHY_REGArrayLengthDTM; + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REGArrayDTM; + } + else if (pHalData->RF_Type == RF_1T2R) + { + PHY_REGArrayLen = PHY_REG_1T2RArrayLengthDTM; + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T2RArrayDTM; + } + + } + else + */ + //{ + // + // 2008.11.06 Modified by tynli. + // + AGCTAB_ArrayLen = AGCTAB_ArrayLength; + Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_Array; + PHY_REGArrayLen = PHY_REG_2T2RArrayLength; // Default RF_type: 2T2R + Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_Array; + //} + + if(ConfigType == BaseBand_Config_PHY_REG) + { + for(i=0;i<PHY_REGArrayLen;i=i+2) + { + if (Rtl819XPHY_REGArray_Table[i] == 0xfe) + mdelay(50); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfd) + mdelay(5); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfc) + mdelay(1); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfb) + udelay(50); + else if (Rtl819XPHY_REGArray_Table[i] == 0xfa) + udelay(5); + else if (Rtl819XPHY_REGArray_Table[i] == 0xf9) + udelay(1); + rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]); + //RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]); + + } + } + else if(ConfigType == BaseBand_Config_AGC_TAB){ + for(i=0;i<AGCTAB_ArrayLen;i=i+2) + { + rtl8192_setBBreg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]); + } + } +//#endif // #if (HAL_CODE_BASE != RTL8192_S) + return RT_STATUS_SUCCESS; +} + +/*----------------------------------------------------------------------------- + * Function: phy_ConfigBBWithPgHeaderFile + * + * Overview: Config PHY_REG_PG array + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/06/2008 MHC Add later!!!!!!.. Please modify for new files!!!! + * 11/10/2008 tynli Modify to mew files. + //use in phy only + *---------------------------------------------------------------------------*/ +static RT_STATUS +phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType) +{ + int i; + //u8 ArrayLength; + u32* Rtl819XPHY_REGArray_Table_PG; + u16 PHY_REGArrayPGLen; + //struct r8192_priv *priv = ieee80211_priv(dev); +//#if (HAL_CODE_BASE != RTL8192_S) + // Default: pHalData->RF_Type = RF_2T2R. + + PHY_REGArrayPGLen = PHY_REG_Array_PGLength; + Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG; + + if(ConfigType == BaseBand_Config_PHY_REG) + { + for(i=0;i<PHY_REGArrayPGLen;i=i+3) + { + if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfe) + mdelay(50); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfd) + mdelay(5); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfc) + mdelay(1); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfb) + udelay(50); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfa) + udelay(5); + else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xf9) + udelay(1); + rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1], Rtl819XPHY_REGArray_Table_PG[i+2]); + //RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table_PG[0] is %lx Rtl819XPHY_REGArray_Table_PG[1] is %lx \n", + // Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1]); + } + }else{ + RT_TRACE(COMP_SEND, "phy_ConfigBBWithPgHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n"); + } + return RT_STATUS_SUCCESS; + +} /* phy_ConfigBBWithPgHeaderFile */ + +/*----------------------------------------------------------------------------- + * Function: PHY_ConfigRFWithHeaderFile() + * + * Overview: This function read RF parameters from general file format, and do RF 3-wire + * + * Input: PADAPTER Adapter + * char* pFileName + * RF90_RADIO_PATH_E eRFPath + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: configuration file exist + * + * Note: Delay may be required for RF configuration + *---------------------------------------------------------------------------*/ +//in 8256 phy_RF8256_Config_ParaFile only +//RT_STATUS PHY_ConfigRFWithHeaderFile(struct net_device* dev,RF90_RADIO_PATH_E eRFPath) +u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + int i; + //u32* pRFArray; + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + u32 *Rtl819XRadioA_Array_Table; + u32 *Rtl819XRadioB_Array_Table; + //u32* Rtl819XRadioC_Array_Table; + //u32* Rtl819XRadioD_Array_Table; + u16 RadioA_ArrayLen,RadioB_ArrayLen; + + { //2008.11.06 Modified by tynli + RadioA_ArrayLen = RadioA_1T_ArrayLength; + Rtl819XRadioA_Array_Table=Rtl819XRadioA_Array; + Rtl819XRadioB_Array_Table=Rtl819XRadioB_Array; + RadioB_ArrayLen = RadioB_ArrayLength; + } + + if( priv->rf_type == RF_2T2R_GREEN ) + { + Rtl819XRadioB_Array_Table = Rtl819XRadioB_GM_Array; + RadioB_ArrayLen = RadioB_GM_ArrayLength; + } + else + { + Rtl819XRadioB_Array_Table = Rtl819XRadioB_Array; + RadioB_ArrayLen = RadioB_ArrayLength; + } + + rtStatus = RT_STATUS_SUCCESS; + + // When initialization, we want the delay function(mdelay(), delay_us() + // ==> actually we call PlatformStallExecution()) to do NdisStallExecution() + // [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK + // to run at Dispatch level to achive it. + //cosa PlatformAcquireSpinLock(Adapter, RT_INITIAL_SPINLOCK); + + switch(eRFPath){ + case RF90_PATH_A: + for(i = 0;i<RadioA_ArrayLen; i=i+2){ + if(Rtl819XRadioA_Array_Table[i] == 0xfe) + { // Deay specific ms. Only RF configuration require delay. +//#if (DEV_BUS_TYPE == USB_INTERFACE) +#ifdef RTL8192SU + mdelay(1000); +#else + mdelay(50); +#endif + } + else if (Rtl819XRadioA_Array_Table[i] == 0xfd) + mdelay(5); + else if (Rtl819XRadioA_Array_Table[i] == 0xfc) + mdelay(1); + else if (Rtl819XRadioA_Array_Table[i] == 0xfb) + udelay(50); + //PlatformStallExecution(50); + else if (Rtl819XRadioA_Array_Table[i] == 0xfa) + udelay(5); + else if (Rtl819XRadioA_Array_Table[i] == 0xf9) + udelay(1); + else + { + rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioA_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioA_Array_Table[i+1]); + } + } + break; + case RF90_PATH_B: + for(i = 0;i<RadioB_ArrayLen; i=i+2){ + if(Rtl819XRadioB_Array_Table[i] == 0xfe) + { // Deay specific ms. Only RF configuration require delay. +//#if (DEV_BUS_TYPE == USB_INTERFACE) +#ifdef RTL8192SU + mdelay(1000); +#else + mdelay(50); +#endif + } + else if (Rtl819XRadioB_Array_Table[i] == 0xfd) + mdelay(5); + else if (Rtl819XRadioB_Array_Table[i] == 0xfc) + mdelay(1); + else if (Rtl819XRadioB_Array_Table[i] == 0xfb) + udelay(50); + else if (Rtl819XRadioB_Array_Table[i] == 0xfa) + udelay(5); + else if (Rtl819XRadioB_Array_Table[i] == 0xf9) + udelay(1); + else + { + rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioB_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioB_Array_Table[i+1]); + } + } + break; + case RF90_PATH_C: + break; + case RF90_PATH_D: + break; + default: + break; + } + + return rtStatus; + +} + +/*----------------------------------------------------------------------------- + * Function: PHY_CheckBBAndRFOK() + * + * Overview: This function is write register and then readback to make sure whether + * BB[PHY0, PHY1], RF[Patha, path b, path c, path d] is Ok + * + * Input: PADAPTER Adapter + * HW90_BLOCK_E CheckBlock + * RF90_RADIO_PATH_E eRFPath // it is used only when CheckBlock is HW90_BLOCK_RF + * + * Output: NONE + * + * Return: RT_STATUS_SUCCESS: PHY is OK + * + * Note: This function may be removed in the ASIC + *---------------------------------------------------------------------------*/ +//in 8256 phy_RF8256_Config_HardCode +//but we don't use it temp +RT_STATUS +PHY_CheckBBAndRFOK( + struct net_device* dev, + HW90_BLOCK_E CheckBlock, + RF90_RADIO_PATH_E eRFPath + ) +{ + //struct r8192_priv *priv = ieee80211_priv(dev); + RT_STATUS rtStatus = RT_STATUS_SUCCESS; + u32 i, CheckTimes = 4,ulRegRead = 0; + u32 WriteAddr[4]; + u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f}; + + // Initialize register address offset to be checked + WriteAddr[HW90_BLOCK_MAC] = 0x100; + WriteAddr[HW90_BLOCK_PHY0] = 0x900; + WriteAddr[HW90_BLOCK_PHY1] = 0x800; + WriteAddr[HW90_BLOCK_RF] = 0x3; + + for(i=0 ; i < CheckTimes ; i++) + { + + // + // Write Data to register and readback + // + switch(CheckBlock) + { + case HW90_BLOCK_MAC: + //RT_ASSERT(FALSE, ("PHY_CheckBBRFOK(): Never Write 0x100 here!")); + RT_TRACE(COMP_INIT, "PHY_CheckBBRFOK(): Never Write 0x100 here!\n"); + break; + + case HW90_BLOCK_PHY0: + case HW90_BLOCK_PHY1: + write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]); + ulRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]); + break; + + case HW90_BLOCK_RF: + // When initialization, we want the delay function(mdelay(), delay_us() + // ==> actually we call PlatformStallExecution()) to do NdisStallExecution() + // [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK + // to run at Dispatch level to achive it. + //cosa PlatformAcquireSpinLock(dev, RT_INITIAL_SPINLOCK); + WriteData[i] &= 0xfff; + rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bRFRegOffsetMask, WriteData[i]); + // TODO: we should not delay for such a long time. Ask SD3 + mdelay(10); + ulRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord); + mdelay(10); + //cosa PlatformReleaseSpinLock(dev, RT_INITIAL_SPINLOCK); + break; + + default: + rtStatus = RT_STATUS_FAILURE; + break; + } + + + // + // Check whether readback data is correct + // + if(ulRegRead != WriteData[i]) + { + //RT_TRACE(COMP_FPGA, ("ulRegRead: %x, WriteData: %x \n", ulRegRead, WriteData[i])); + RT_TRACE(COMP_ERR, "read back error(read:%x, write:%x)\n", ulRegRead, WriteData[i]); + rtStatus = RT_STATUS_FAILURE; + break; + } + } + + return rtStatus; +} + +//no use temp in windows driver +#ifdef TO_DO_LIST +void +PHY_SetRFPowerState8192SUsb( + struct net_device* dev, + RF_POWER_STATE RFPowerState + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + bool WaitShutDown = FALSE; + u32 DWordContent; + //RF90_RADIO_PATH_E eRFPath; + u8 eRFPath; + BB_REGISTER_DEFINITION_T *pPhyReg; + + if(priv->SetRFPowerStateInProgress == TRUE) + return; + + priv->SetRFPowerStateInProgress = TRUE; + + // TODO: Emily, 2006.11.21, we should rewrite this function + + if(RFPowerState==RF_SHUT_DOWN) + { + RFPowerState=RF_OFF; + WaitShutDown=TRUE; + } + + + priv->RFPowerState = RFPowerState; + switch( priv->rf_chip ) + { + case RF_8225: + case RF_6052: + switch( RFPowerState ) + { + case RF_ON: + break; + + case RF_SLEEP: + break; + + case RF_OFF: + break; + } + break; + + case RF_8256: + switch( RFPowerState ) + { + case RF_ON: + break; + + case RF_SLEEP: + break; + + case RF_OFF: + for(eRFPath=(RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < RF90_PATH_MAX; eRFPath++) + { + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + continue; + + pPhyReg = &priv->PHYRegDef[eRFPath]; + rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, bRFSI_RFENV); + rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0); + } + break; + } + break; + + case RF_8258: + break; + }// switch( priv->rf_chip ) + + priv->SetRFPowerStateInProgress = FALSE; +} +#endif + +#ifdef RTL8192U +//no use temp in windows driver +void +PHY_UpdateInitialGain( + struct net_device* dev + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + //unsigned char *IGTable; + //u8 DIG_CurrentInitialGain = 4; + + switch(priv->rf_chip) + { + case RF_8225: + break; + case RF_8256: + break; + case RF_8258: + break; + case RF_PSEUDO_11N: + break; + case RF_6052: + break; + default: + RT_TRACE(COMP_DBG, "PHY_UpdateInitialGain(): unknown rf_chip: %#X\n", priv->rf_chip); + break; + } +} +#endif + +//YJ,modified,090107 +void PHY_GetHWRegOriginalValue(struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + // read tx power offset + // Simulate 8192 + priv->MCSTxPowerLevelOriginalOffset[0] = + rtl8192_QueryBBReg(dev, rTxAGC_Rate18_06, bMaskDWord); + priv->MCSTxPowerLevelOriginalOffset[1] = + rtl8192_QueryBBReg(dev, rTxAGC_Rate54_24, bMaskDWord); + priv->MCSTxPowerLevelOriginalOffset[2] = + rtl8192_QueryBBReg(dev, rTxAGC_Mcs03_Mcs00, bMaskDWord); + priv->MCSTxPowerLevelOriginalOffset[3] = + rtl8192_QueryBBReg(dev, rTxAGC_Mcs07_Mcs04, bMaskDWord); + priv->MCSTxPowerLevelOriginalOffset[4] = + rtl8192_QueryBBReg(dev, rTxAGC_Mcs11_Mcs08, bMaskDWord); + priv->MCSTxPowerLevelOriginalOffset[5] = + rtl8192_QueryBBReg(dev, rTxAGC_Mcs15_Mcs12, bMaskDWord); + + // Read CCK offset + priv->MCSTxPowerLevelOriginalOffset[6] = + rtl8192_QueryBBReg(dev, rTxAGC_CCK_Mcs32, bMaskDWord); + RT_TRACE(COMP_INIT, "Legacy OFDM =%08x/%08x HT_OFDM=%08x/%08x/%08x/%08x\n", + priv->MCSTxPowerLevelOriginalOffset[0], priv->MCSTxPowerLevelOriginalOffset[1] , + priv->MCSTxPowerLevelOriginalOffset[2], priv->MCSTxPowerLevelOriginalOffset[3] , + priv->MCSTxPowerLevelOriginalOffset[4], priv->MCSTxPowerLevelOriginalOffset[5] ); + + // read rx initial gain + priv->DefaultInitialGain[0] = rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bMaskByte0); + priv->DefaultInitialGain[1] = rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bMaskByte0); + priv->DefaultInitialGain[2] = rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bMaskByte0); + priv->DefaultInitialGain[3] = rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bMaskByte0); + RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", + priv->DefaultInitialGain[0], priv->DefaultInitialGain[1], + priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]); + + // read framesync + priv->framesync = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector3, bMaskByte0); + priv->framesyncC34 = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector2, bMaskDWord); + RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n", + rOFDM0_RxDetector3, priv->framesync); +} +//YJ,modified,090107,end + + + +/** +* Function: phy_InitBBRFRegisterDefinition +* +* OverView: Initialize Register definition offset for Radio Path A/B/C/D +* +* Input: +* PADAPTER Adapter, +* +* Output: None +* Return: None +* Note: The initialization value is constant and it should never be changes +*/ +//use in phy only +static void phy_InitBBRFRegisterDefinition( struct net_device* dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + // RF Interface Sowrtware Control + priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 + priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) + priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874 + priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) + + // RF Interface Readback Value + priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0 + priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) + priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4 + priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) + + // RF Interface Output (and Enable) + priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860 + priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864 + priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868 + priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C + + // RF Interface (Output and) Enable + priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) + priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) + priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A) + priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E) + + //Addr of LSSI. Wirte RF register by driver + priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter + priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; + priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter; + priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter; + + // RF parameter + priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select + priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter; + priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter; + priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter; + + // Tx AGC Gain Stage (same for all path. Should we remove this?) + priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage + + // Tranceiver A~D HSSI Parameter-1 + priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1 + priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1 + priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1; //wire control parameter1 + priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1; //wire control parameter1 + + // Tranceiver A~D HSSI Parameter-2 + priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2 + priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2 + priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2; //wire control parameter2 + priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2; //wire control parameter1 + + // RF switch Control + priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control + priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl; + priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl; + priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl; + + // AGC control 1 + priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1; + priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1; + priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1; + priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1; + + // AGC control 2 + priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2; + priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2; + priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2; + priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2; + + // RX AFE control 1 + priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance; + priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance; + priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance; + priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance; + + // RX AFE control 1 + priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE; + priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE; + priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE; + priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE; + + // Tx AFE control 1 + priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance; + priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance; + priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance; + priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance; + + // Tx AFE control 2 + priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE; + priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE; + priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE; + priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE; + + // Tranceiver LSSI Readback SI mode + priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack; + + // Tranceiver LSSI Readback PI mode + priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback; + priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback; + //pHalData->PHYRegDef[RF90_PATH_C].rfLSSIReadBackPi = rFPGA0_XC_LSSIReadBack; + //pHalData->PHYRegDef[RF90_PATH_D].rfLSSIReadBackPi = rFPGA0_XD_LSSIReadBack; + +} + + +// +// Description: Change RF power state. +// +// Assumption: This function must be executed in re-schdulable context, +// ie. PASSIVE_LEVEL. +// +// 050823, by rcnjko. +//not understand it seem's use in init +//SetHwReg8192SUsb--->HalFunc.SetHwRegHandler +bool PHY_SetRFPowerState(struct net_device* dev, RT_RF_POWER_STATE eRFPowerState) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + bool bResult = FALSE; + + RT_TRACE(COMP_RF, "---------> PHY_SetRFPowerState(): eRFPowerState(%d)\n", eRFPowerState); + + if(eRFPowerState == priv->ieee80211->eRFPowerState) + { + RT_TRACE(COMP_RF, "<--------- PHY_SetRFPowerState(): discard the request for eRFPowerState(%d) is the same.\n", eRFPowerState); + return bResult; + } + + bResult = phy_SetRFPowerState8192SU(dev, eRFPowerState); + + RT_TRACE(COMP_RF, "<--------- PHY_SetRFPowerState(): bResult(%d)\n", bResult); + + return bResult; +} + +//use in phy only +static bool phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE eRFPowerState) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + bool bResult = TRUE; + //u8 eRFPath; + //u8 i, QueueID; + u8 u1bTmp; + + if(priv->SetRFPowerStateInProgress == TRUE) + return FALSE; + + priv->SetRFPowerStateInProgress = TRUE; + + switch(priv->rf_chip ) + { + default: + switch( eRFPowerState ) + { + case eRfOn: + write_nic_dword(dev, WFM5, FW_BB_RESET_ENABLE); + write_nic_word(dev, CMDR, 0x37FC); + write_nic_byte(dev, PHY_CCA, 0x3); + write_nic_byte(dev, TXPAUSE, 0x00); + write_nic_byte(dev, SPS1_CTRL, 0x64); + break; + + // + // In current solution, RFSleep=RFOff in order to save power under 802.11 power save. + // By Bruce, 2008-01-16. + // + case eRfSleep: + case eRfOff: + if (priv->ieee80211->eRFPowerState == eRfSleep || priv->ieee80211->eRFPowerState == eRfOff) + break; +#ifdef NOT_YET + // Make sure BusyQueue is empty befor turn off RFE pwoer. + for(QueueID = 0, i = 0; QueueID < MAX_TX_QUEUE; ) + { + if(RTIsListEmpty(&Adapter->TcbBusyQueue[QueueID])) + { + QueueID++; + continue; + } + else + { + RT_TRACE(COMP_POWER, "eRf Off/Sleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (i+1), QueueID); + udelay(10); + i++; + } + + if(i >= MAX_DOZE_WAITING_TIMES_9x) + { + RT_TRACE(COMP_POWER, "\n\n\n SetZebraRFPowerState8185B(): eRfOff: %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID); + break; + } + } +#endif + // + //RF Off/Sleep sequence. Designed/tested from SD4 Scott, SD1 Grent and Jonbon. + // Added by Bruce, 2008-11-22. + // + //================================================================== + // (0) Disable FW BB reset checking + write_nic_dword(dev, WFM5, FW_BB_RESET_DISABLE); + + // (1) Switching Power Supply Register : Disable LD12 & SW12 (for IT) + u1bTmp = read_nic_byte(dev, LDOV12D_CTRL); + u1bTmp |= BIT0; + write_nic_byte(dev, LDOV12D_CTRL, u1bTmp); + + write_nic_byte(dev, SPS1_CTRL, 0x0); + write_nic_byte(dev, TXPAUSE, 0xFF); + + // (2) MAC Tx/Rx enable, BB enable, CCK/OFDM enable + write_nic_word(dev, CMDR, 0x77FC); + write_nic_byte(dev, PHY_CCA, 0x0); + udelay(100); + + write_nic_word(dev, CMDR, 0x37FC); + udelay(10); + + write_nic_word(dev, CMDR, 0x77FC); + udelay(10); + + // (3) Reset BB TRX blocks + write_nic_word(dev, CMDR, 0x57FC); + break; + + default: + bResult = FALSE; + //RT_ASSERT(FALSE, ("phy_SetRFPowerState8192SU(): unknow state to set: 0x%X!!!\n", eRFPowerState)); + break; + } + break; + + } + priv->ieee80211->eRFPowerState = eRFPowerState; +#ifdef TO_DO_LIST + if(bResult) + { + // Update current RF state variable. + priv->ieee80211->eRFPowerState = eRFPowerState; + + switch(priv->rf_chip ) + { + case RF_8256: + switch(priv->ieee80211->eRFPowerState) + { + case eRfOff: + // + //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015 + // + if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS ) + { + dev->HalFunc.LedControlHandler(dev,LED_CTL_NO_LINK); + } + else + { + // Turn off LED if RF is not ON. + dev->HalFunc.LedControlHandler(dev, LED_CTL_POWER_OFF); + } + break; + + case eRfOn: + // Turn on RF we are still linked, which might happen when + // we quickly turn off and on HW RF. 2006.05.12, by rcnjko. + if( pMgntInfo->bMediaConnect == TRUE ) + { + dev->HalFunc.LedControlHandler(dev, LED_CTL_LINK); + } + else + { + // Turn off LED if RF is not ON. + dev->HalFunc.LedControlHandler(dev, LED_CTL_NO_LINK); + } + break; + + default: + // do nothing. + break; + }// Switch RF state + + break; + + default: + RT_TRACE(COMP_RF, "phy_SetRFPowerState8192SU(): Unknown RF type\n"); + break; + }// Switch rf_chip + } +#endif + priv->SetRFPowerStateInProgress = FALSE; + + return bResult; +} + +/*----------------------------------------------------------------------------- + * Function: GetTxPowerLevel8190() + * + * Overview: This function is export to "common" moudule + * + * Input: PADAPTER Adapter + * psByte Power Level + * + * Output: NONE + * + * Return: NONE + * + *---------------------------------------------------------------------------*/ + // no use temp + void +PHY_GetTxPowerLevel8192S( + struct net_device* dev, + long* powerlevel + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 TxPwrLevel = 0; + long TxPwrDbm; + // + // Because the Tx power indexes are different, we report the maximum of them to + // meet the CCX TPC request. By Bruce, 2008-01-31. + // + + // CCK + TxPwrLevel = priv->CurrentCckTxPwrIdx; + TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_B, TxPwrLevel); + + // Legacy OFDM + TxPwrLevel = priv->CurrentOfdm24GTxPwrIdx + priv->LegacyHTTxPowerDiff; + + // Compare with Legacy OFDM Tx power. + if(phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm) + TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_G, TxPwrLevel); + + // HT OFDM + TxPwrLevel = priv->CurrentOfdm24GTxPwrIdx; + + // Compare with HT OFDM Tx power. + if(phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm) + TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_N_24G, TxPwrLevel); + + *powerlevel = TxPwrDbm; +} + +/*----------------------------------------------------------------------------- + * Function: SetTxPowerLevel8190() + * + * Overview: This function is export to "HalCommon" moudule + * + * Input: PADAPTER Adapter + * u1Byte channel + * + * Output: NONE + * + * Return: NONE + * 2008/11/04 MHC We remove EEPROM_93C56. + * We need to move CCX relative code to independet file. +* 2009/01/21 MHC Support new EEPROM format from SD3 requirement. + *---------------------------------------------------------------------------*/ + void PHY_SetTxPowerLevel8192S(struct net_device* dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(dev); + u8 powerlevel = (u8)EEPROM_Default_TxPower, powerlevelOFDM24G = 0x10; + s8 ant_pwr_diff = 0; + u32 u4RegValue; + u8 index = (channel -1); + // 2009/01/22 MH Add for new EEPROM format from SD3 + u8 pwrdiff[2] = {0}; + u8 ht20pwr[2] = {0}, ht40pwr[2] = {0}; + u8 rfpath = 0, rfpathnum = 2; + + if(priv->bTXPowerDataReadFromEEPORM == FALSE) + return; + + // + // Read predefined TX power index in EEPROM + // +// if(priv->epromtype == EPROM_93c46) + { +#ifdef EEPROM_OLD_FORMAT_SUPPORT + powerlevel = priv->TxPowerLevelCCK[index]; + powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[index]; +#else + // + // Mainly we use RF-A Tx Power to write the Tx Power registers, but the RF-B Tx + // Power must be calculated by the antenna diff. + // So we have to rewrite Antenna gain offset register here. + // Please refer to BB register 0x80c + // 1. For CCK. + // 2. For OFDM 1T or 2T + // + + // 1. CCK + powerlevel = priv->RfTxPwrLevelCck[0][index]; + + if (priv->rf_type == RF_1T2R || priv->rf_type == RF_1T1R) + { + // Read HT 40 OFDM TX power + powerlevelOFDM24G = priv->RfTxPwrLevelOfdm1T[0][index]; + // RF B HT OFDM pwr-RFA HT OFDM pwr + // Only one RF we need not to decide B <-> A pwr diff + + // Legacy<->HT pwr diff, we only care about path A. + + // We only assume 1T as RF path A + rfpathnum = 1; + ht20pwr[0] = ht40pwr[0] = priv->RfTxPwrLevelOfdm1T[0][index]; + } + else if (priv->rf_type == RF_2T2R) + { + // Read HT 40 OFDM TX power + powerlevelOFDM24G = priv->RfTxPwrLevelOfdm2T[0][index]; + // RF B HT OFDM pwr-RFA HT OFDM pwr + ant_pwr_diff = priv->RfTxPwrLevelOfdm2T[1][index] - + priv->RfTxPwrLevelOfdm2T[0][index]; + // RF B (HT OFDM pwr+legacy-ht-diff) -(RFA HT OFDM pwr+legacy-ht-diff) + // We can not handle Path B&A HT/Legacy pwr diff for 92S now. + + //RTPRINT(FPHY, PHY_TXPWR, ("CH-%d HT40 A/B Pwr index = %x/%x(%d/%d)\n", + //channel, priv->RfTxPwrLevelOfdm2T[0][index], + //priv->RfTxPwrLevelOfdm2T[1][index], + //priv->RfTxPwrLevelOfdm2T[0][index], + //priv->RfTxPwrLevelOfdm2T[1][index])); + + ht20pwr[0] = ht40pwr[0] = priv->RfTxPwrLevelOfdm2T[0][index]; + ht20pwr[1] = ht40pwr[1] = priv->RfTxPwrLevelOfdm2T[1][index]; + } + + // + // 2009/01/21 MH Support new EEPROM format from SD3 requirement + // 2009/02/10 Cosa, Here is only for reg B/C/D to A gain diff. + // + if (priv->EEPROMVersion == 2) // Defined by SD1 Jong + { + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20) + { + for (rfpath = 0; rfpath < rfpathnum; rfpath++) + { + // HT 20<->40 pwr diff + pwrdiff[rfpath] = priv->TxPwrHt20Diff[rfpath][index]; + + // Calculate Antenna pwr diff + if (pwrdiff[rfpath] < 8) // 0~+7 + { + #if 0//cosa, it doesn't need to add the offset here + if (rfpath == 0) + powerlevelOFDM24G += pwrdiff[rfpath]; + #endif + ht20pwr[rfpath] += pwrdiff[rfpath]; + } + else // index8-15=-8~-1 + { + #if 0//cosa, it doesn't need to add the offset here + if (rfpath == 0) + powerlevelOFDM24G -= (15-pwrdiff[rfpath]); + #endif + ht20pwr[rfpath] -= (15-pwrdiff[rfpath]); + } + } + + // RF B HT OFDM pwr-RFA HT OFDM pwr + if (priv->rf_type == RF_2T2R) + ant_pwr_diff = ht20pwr[1] - ht20pwr[0]; + + //RTPRINT(FPHY, PHY_TXPWR, + //("HT20 to HT40 pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n", + //pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0])); + } + + // Band Edge scheme is enabled for FCC mode + if (priv->TxPwrbandEdgeFlag == 1/* && pHalData->ChannelPlan == 0*/) + { + for (rfpath = 0; rfpath < rfpathnum; rfpath++) + { + pwrdiff[rfpath] = 0; + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) + { + if (channel <= 3) + pwrdiff[rfpath] = priv->TxPwrbandEdgeHt40[rfpath][0]; + else if (channel >= 9) + pwrdiff[rfpath] = priv->TxPwrbandEdgeHt40[rfpath][1]; + else + pwrdiff[rfpath] = 0; + + ht40pwr[rfpath] -= pwrdiff[rfpath]; + } + else if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20) + { + if (channel == 1) + pwrdiff[rfpath] = priv->TxPwrbandEdgeHt20[rfpath][0]; + else if (channel >= 11) + pwrdiff[rfpath] = priv->TxPwrbandEdgeHt20[rfpath][1]; + else + pwrdiff[rfpath] = 0; + + ht20pwr[rfpath] -= pwrdiff[rfpath]; + } + #if 0//cosa, it doesn't need to add the offset here + if (rfpath == 0) + powerlevelOFDM24G -= pwrdiff[rfpath]; + #endif + } + + if (priv->rf_type == RF_2T2R) + { + // HT 20/40 must decide if they need to minus BD pwr offset + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) + ant_pwr_diff = ht40pwr[1] - ht40pwr[0]; + else + ant_pwr_diff = ht20pwr[1] - ht20pwr[0]; + } + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20) + { + if (channel <= 1 || channel >= 11) + { + //RTPRINT(FPHY, PHY_TXPWR, + //("HT20 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n", + //pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0])); + } + } + else + { + if (channel <= 3 || channel >= 9) + { + //RTPRINT(FPHY, PHY_TXPWR, + //("HT40 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n", + //pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht40pwr[1], ht40pwr[0])); + } + } + } +#if 0//cosa, useless + // Read HT/Legacy OFDM diff + legacy_ant_pwr_diff= pHalData->TxPwrLegacyHtDiff[RF90_PATH_A][index]; +#endif + } + + //Cosa added for protection, the reg rFPGA0_TxGainStage + // range is from 7~-8, index = 0x0~0xf + if(ant_pwr_diff > 7) + ant_pwr_diff = 7; + if(ant_pwr_diff < -8) + ant_pwr_diff = -8; + + //RTPRINT(FPHY, PHY_TXPWR, + //("CCK/HT Power index = %x/%x(%d/%d), ant_pwr_diff=%d\n", + //powerlevel, powerlevelOFDM24G, powerlevel, powerlevelOFDM24G, ant_pwr_diff)); + + ant_pwr_diff &= 0xf; + + // Antenna TX power difference + priv->AntennaTxPwDiff[2] = 0;// RF-D, don't care + priv->AntennaTxPwDiff[1] = 0;// RF-C, don't care + priv->AntennaTxPwDiff[0] = (u8)(ant_pwr_diff); // RF-B + + // Antenna gain offset from B/C/D to A + u4RegValue = ( priv->AntennaTxPwDiff[2]<<8 | + priv->AntennaTxPwDiff[1]<<4 | + priv->AntennaTxPwDiff[0] ); + + // Notify Tx power difference for B/C/D to A!!! + rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue); +#endif + } + + // + // CCX 2 S31, AP control of client transmit power: + // 1. We shall not exceed Cell Power Limit as possible as we can. + // 2. Tolerance is +/- 5dB. + // 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit. + // + // TODO: + // 1. 802.11h power contraint + // + // 071011, by rcnjko. + // +#ifdef TODO //WB, 11h has not implemented now. + if( priv->ieee80211->iw_mode != IW_MODE_INFRA && priv->bWithCcxCellPwr && + channel == priv->ieee80211->current_network.channel)// & priv->ieee80211->mAssoc ) + { + u8 CckCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_B, priv->CcxCellPwr); + u8 LegacyOfdmCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_G, priv->CcxCellPwr); + u8 OfdmCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_N_24G, priv->CcxCellPwr); + + RT_TRACE(COMP_TXAGC, + ("CCX Cell Limit: %d dbm => CCK Tx power index : %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n", + priv->CcxCellPwr, CckCellPwrIdx, LegacyOfdmCellPwrIdx, OfdmCellPwrIdx)); + RT_TRACE(COMP_TXAGC, + ("EEPROM channel(%d) => CCK Tx power index: %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n", + channel, powerlevel, powerlevelOFDM24G + priv->LegacyHTTxPowerDiff, powerlevelOFDM24G)); + + // CCK + if(powerlevel > CckCellPwrIdx) + powerlevel = CckCellPwrIdx; + // Legacy OFDM, HT OFDM + if(powerlevelOFDM24G + priv->LegacyHTTxPowerDiff > LegacyOfdmCellPwrIdx) + { + if((OfdmCellPwrIdx - priv->LegacyHTTxPowerDiff) > 0) + { + powerlevelOFDM24G = OfdmCellPwrIdx - priv->LegacyHTTxPowerDiff; + } + else + { + powerlevelOFDM24G = 0; + } + } + + RT_TRACE(COMP_TXAGC, + ("Altered CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n", + powerlevel, powerlevelOFDM24G + priv->LegacyHTTxPowerDiff, powerlevelOFDM24G)); + } +#endif + + priv->CurrentCckTxPwrIdx = powerlevel; + priv->CurrentOfdm24GTxPwrIdx = powerlevelOFDM24G; + + switch(priv->rf_chip) + { + case RF_8225: + //PHY_SetRF8225CckTxPower(dev, powerlevel); + //PHY_SetRF8225OfdmTxPower(dev, powerlevelOFDM24G); + break; + + case RF_8256: +#if 0 + PHY_SetRF8256CCKTxPower(dev, powerlevel); + PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); +#endif + break; + + case RF_6052: + PHY_RF6052SetCckTxPower(dev, powerlevel); + PHY_RF6052SetOFDMTxPower(dev, powerlevelOFDM24G); + break; + + case RF_8258: + break; + default: + break; + } + +} + +// +// Description: +// Update transmit power level of all channel supported. +// +// TODO: +// A mode. +// By Bruce, 2008-02-04. +// no use temp +bool PHY_UpdateTxPowerDbm8192S(struct net_device* dev, long powerInDbm) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 idx; + u8 rf_path; + + // TODO: A mode Tx power. + u8 CckTxPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_B, powerInDbm); + u8 OfdmTxPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_N_24G, powerInDbm); + + if(OfdmTxPwrIdx - priv->LegacyHTTxPowerDiff > 0) + OfdmTxPwrIdx -= priv->LegacyHTTxPowerDiff; + else + OfdmTxPwrIdx = 0; + + for(idx = 0; idx < 14; idx++) + { + priv->TxPowerLevelCCK[idx] = CckTxPwrIdx; + priv->TxPowerLevelCCK_A[idx] = CckTxPwrIdx; + priv->TxPowerLevelCCK_C[idx] = CckTxPwrIdx; + priv->TxPowerLevelOFDM24G[idx] = OfdmTxPwrIdx; + priv->TxPowerLevelOFDM24G_A[idx] = OfdmTxPwrIdx; + priv->TxPowerLevelOFDM24G_C[idx] = OfdmTxPwrIdx; + + for (rf_path = 0; rf_path < 2; rf_path++) + { + priv->RfTxPwrLevelCck[rf_path][idx] = CckTxPwrIdx; + priv->RfTxPwrLevelOfdm1T[rf_path][idx] = \ + priv->RfTxPwrLevelOfdm2T[rf_path][idx] = OfdmTxPwrIdx; + } + } + + PHY_SetTxPowerLevel8192S(dev, priv->chan); + + return TRUE; +} + +/* + Description: + When beacon interval is changed, the values of the + hw registers should be modified. + By tynli, 2008.10.24. + +*/ + +extern void PHY_SetBeaconHwReg( struct net_device* dev, u16 BeaconInterval) +{ + u32 NewBeaconNum; + + NewBeaconNum = BeaconInterval *32 - 64; + //PlatformEFIOWrite4Byte(Adapter, WFM3+4, NewBeaconNum); + //PlatformEFIOWrite4Byte(Adapter, WFM3, 0xB026007C); + write_nic_dword(dev, WFM3+4, NewBeaconNum); + write_nic_dword(dev, WFM3, 0xB026007C); +} + +// +// Description: +// Map dBm into Tx power index according to +// current HW model, for example, RF and PA, and +// current wireless mode. +// By Bruce, 2008-01-29. +// use in phy only +static u8 phy_DbmToTxPwrIdx( + struct net_device* dev, + WIRELESS_MODE WirelessMode, + long PowerInDbm + ) +{ + //struct r8192_priv *priv = ieee80211_priv(dev); + u8 TxPwrIdx = 0; + long Offset = 0; + + + // + // Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to + // 3dbm, and OFDM HT equals to 0dbm repectively. + // Note: + // The mapping may be different by different NICs. Do not use this formula for what needs accurate result. + // By Bruce, 2008-01-29. + // + switch(WirelessMode) + { + case WIRELESS_MODE_B: + Offset = -7; + break; + + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + Offset = -8; + break; + default: + break; + } + + if((PowerInDbm - Offset) > 0) + { + TxPwrIdx = (u8)((PowerInDbm - Offset) * 2); + } + else + { + TxPwrIdx = 0; + } + + // Tx Power Index is too large. + if(TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S) + TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S; + + return TxPwrIdx; +} +// +// Description: +// Map Tx power index into dBm according to +// current HW model, for example, RF and PA, and +// current wireless mode. +// By Bruce, 2008-01-29. +// use in phy only +static long phy_TxPwrIdxToDbm( + struct net_device* dev, + WIRELESS_MODE WirelessMode, + u8 TxPwrIdx + ) +{ + //struct r8192_priv *priv = ieee80211_priv(dev); + long Offset = 0; + long PwrOutDbm = 0; + + // + // Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to + // 3dbm, and OFDM HT equals to 0dbm repectively. + // Note: + // The mapping may be different by different NICs. Do not use this formula for what needs accurate result. + // By Bruce, 2008-01-29. + // + switch(WirelessMode) + { + case WIRELESS_MODE_B: + Offset = -7; + break; + + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + Offset = -8; + break; + default: + break; + } + + PwrOutDbm = TxPwrIdx / 2 + Offset; // Discard the decimal part. + + return PwrOutDbm; +} + +#ifdef TO_DO_LIST +extern VOID +PHY_ScanOperationBackup8192S( + IN PADAPTER Adapter, + IN u1Byte Operation + ) +{ + + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); + u4Byte BitMask; + u1Byte initial_gain; + + + + +#if(RTL8192S_DISABLE_FW_DM == 0) + + if(!Adapter->bDriverStopped) + { + switch(Operation) + { + case SCAN_OPT_BACKUP: + // + // <Roger_Notes> We halt FW DIG and disable high ppower both two DMs here + // and resume both two DMs while scan complete. + // 2008.11.27. + // + Adapter->HalFunc.SetFwCmdHandler(Adapter, FW_CMD_PAUSE_DM_BY_SCAN); + break; + + case SCAN_OPT_RESTORE: + // + // <Roger_Notes> We resume DIG and enable high power both two DMs here and + // recover earlier DIG settings. + // 2008.11.27. + // + Adapter->HalFunc.SetFwCmdHandler(Adapter, FW_CMD_RESUME_DM_BY_SCAN); + break; + + default: + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown Scan Backup Operation. \n")); + break; + } + } +#endif +} +#endif + +//nouse temp +void PHY_InitialGain8192S(struct net_device* dev,u8 Operation ) +{ + + //struct r8192_priv *priv = ieee80211_priv(dev); + //u32 BitMask; + //u8 initial_gain; + +#if 0 // For 8192s test disable + if(!dev->bDriverStopped) + { + switch(Operation) + { + case IG_Backup: + RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Backup, backup the initial gain.\n")); + initial_gain = priv->DefaultInitialGain[0]; + BitMask = bMaskByte0; + if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM) + PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF + pMgntInfo->InitGain_Backup.XAAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask); + pMgntInfo->InitGain_Backup.XBAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask); + pMgntInfo->InitGain_Backup.XCAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask); + pMgntInfo->InitGain_Backup.XDAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask); + BitMask = bMaskByte2; + pMgntInfo->InitGain_Backup.CCA = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask); + + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA)); + + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Write scan initial gain = 0x%x \n", initial_gain)); + write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); + break; + case IG_Restore: + RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Restore, restore the initial gain.\n")); + BitMask = 0x7f; //Bit0~ Bit6 + if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM) + PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF + + rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XAAGCCore1); + rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XBAGCCore1); + rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XCAGCCore1); + rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XDAGCCore1); + BitMask = (BIT22|BIT23); + rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)pMgntInfo->InitGain_Backup.CCA); + + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1)); + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA)); + + if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM) + PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON + break; + default: + RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown IG Operation. \n")); + break; + } + } +#endif +} + +/*----------------------------------------------------------------------------- + * Function: SetBWModeCallback8190Pci() + * + * Overview: Timer callback function for SetSetBWMode + * + * Input: PRT_TIMER pTimer + * + * Output: NONE + * + * Return: NONE + * + * Note: (1) We do not take j mode into consideration now + * (2) Will two workitem of "switch channel" and "switch channel bandwidth" run + * concurrently? + *---------------------------------------------------------------------------*/ +// use in phy only (in win it's timer) +void PHY_SetBWModeCallback8192S(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 regBwOpMode; + + //return; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //u32 NowL, NowH; + //u8Byte BeginTime, EndTime; + u8 regRRSR_RSC; + + RT_TRACE(COMP_SWBW, "==>SetBWModeCallback8190Pci() Switch to %s bandwidth\n", \ + priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"); + + if(priv->rf_chip == RF_PSEUDO_11N) + { + priv->SetBWModeInProgress= FALSE; + return; + } + + if(!priv->up) + return; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //NowL = read_nic_dword(dev, TSFR); + //NowH = read_nic_dword(dev, TSFR+4); + //BeginTime = ((u8Byte)NowH << 32) + NowL; + + //3// + //3//<1>Set MAC register + //3// + regBwOpMode = read_nic_byte(dev, BW_OPMODE); + regRRSR_RSC = read_nic_byte(dev, RRSR+2); + + switch(priv->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + //if(priv->card_8192_version >= VERSION_8192S_BCUT) + // write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58); + + regBwOpMode |= BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; + + case HT_CHANNEL_WIDTH_20_40: + //if(priv->card_8192_version >= VERSION_8192S_BCUT) + // write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18); + + regBwOpMode &= ~BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5); + write_nic_byte(dev, RRSR+2, regRRSR_RSC); + break; + + default: + RT_TRACE(COMP_DBG, "SetBWModeCallback8190Pci():\ + unknown Bandwidth: %#X\n",priv->CurrentChannelBW); + break; + } + + //3// + //3//<2>Set PHY related register + //3// + switch(priv->CurrentChannelBW) + { + /* 20 MHz channel*/ + case HT_CHANNEL_WIDTH_20: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); + + // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207 + // It is set in Tx descriptor for 8192x series + //write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000); + //write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317); + //write_nic_dword(dev, rCCK0_DebugPort, 0x00000204); + #if 0 //LZM 090219 + rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000); + rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317); + rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3); + #endif + + if (priv->card_8192_version >= VERSION_8192S_BCUT) + write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58); + + + break; + + /* 40 MHz channel*/ + case HT_CHANNEL_WIDTH_20_40: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); + + // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207 + //write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000); + //write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e); + //write_nic_dword(dev, rCCK0_DebugPort, 0x00000409); + #if 0 //LZM 090219 + rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000); + rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e); + rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409); + #endif + + // Set Control channel to upper or lower. These settings are required only for 40MHz + rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); + rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); + + //rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3); + if (priv->card_8192_version >= VERSION_8192S_BCUT) + write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18); + + break; + + default: + RT_TRACE(COMP_DBG, "SetBWModeCallback8190Pci(): unknown Bandwidth: %#X\n"\ + ,priv->CurrentChannelBW); + break; + + } + //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //NowL = read_nic_dword(dev, TSFR); + //NowH = read_nic_dword(dev, TSFR+4); + //EndTime = ((u8Byte)NowH << 32) + NowL; + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime))); + + //3<3>Set RF related register + switch( priv->rf_chip ) + { + case RF_8225: + //PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8256: + // Please implement this function in Hal8190PciPhy8256.c + //PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8258: + // Please implement this function in Hal8190PciPhy8258.c + // PHY_SetRF8258Bandwidth(); + break; + + case RF_PSEUDO_11N: + // Do Nothing + break; + + case RF_6052: + PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW); + break; + default: + printk("Unknown rf_chip: %d\n", priv->rf_chip); + break; + } + + priv->SetBWModeInProgress= FALSE; + + RT_TRACE(COMP_SWBW, "<==SetBWModeCallback8190Pci() \n" ); +} + + + /*----------------------------------------------------------------------------- + * Function: SetBWMode8190Pci() + * + * Overview: This function is export to "HalCommon" moudule + * + * Input: PADAPTER Adapter + * HT_CHANNEL_WIDTH Bandwidth //20M or 40M + * + * Output: NONE + * + * Return: NONE + * + * Note: We do not take j mode into consideration now + *---------------------------------------------------------------------------*/ +//extern void PHY_SetBWMode8192S( struct net_device* dev, +// HT_CHANNEL_WIDTH Bandwidth, // 20M or 40M +// HT_EXTCHNL_OFFSET Offset // Upper, Lower, or Don't care +void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + HT_CHANNEL_WIDTH tmpBW = priv->CurrentChannelBW; + + + // Modified it for 20/40 mhz switch by guangan 070531 + + //return; + + //if(priv->SwChnlInProgress) +// if(pMgntInfo->bScanInProgress) +// { +// RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s Exit because bScanInProgress!\n", +// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")); +// return; +// } + +// if(priv->SetBWModeInProgress) +// { +// // Modified it for 20/40 mhz switch by guangan 070531 +// RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s cancel last timer because SetBWModeInProgress!\n", +// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")); +// PlatformCancelTimer(dev, &priv->SetBWModeTimer); +// //return; +// } + + if(priv->SetBWModeInProgress) + return; + + priv->SetBWModeInProgress= TRUE; + + priv->CurrentChannelBW = Bandwidth; + + if(Offset==HT_EXTCHNL_OFFSET_LOWER) + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER; + else if(Offset==HT_EXTCHNL_OFFSET_UPPER) + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER; + else + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; + +#if 0 + if(!priv->bDriverStopped) + { +#ifdef USE_WORKITEM + PlatformScheduleWorkItem(&(priv->SetBWModeWorkItem));//SetBWModeCallback8192SUsbWorkItem +#else + PlatformSetTimer(dev, &(priv->SetBWModeTimer), 0);//PHY_SetBWModeCallback8192S +#endif + } +#endif + if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) ) + { +#ifdef RTL8192SE + PHY_SetBWModeCallback8192S(dev); +#elif defined(RTL8192SU) + SetBWModeCallback8192SUsbWorkItem(dev); +#endif + } + else + { + RT_TRACE(COMP_SCAN, "PHY_SetBWMode8192S() SetBWModeInProgress FALSE driver sleep or unload\n"); + priv->SetBWModeInProgress= FALSE; + priv->CurrentChannelBW = tmpBW; + } +} + +// use in phy only (in win it's timer) +void PHY_SwChnlCallback8192S(struct net_device *dev) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + u32 delay; + //bool ret; + + RT_TRACE(COMP_CH, "==>SwChnlCallback8190Pci(), switch to channel %d\n", priv->chan); + + if(!priv->up) + return; + + if(priv->rf_chip == RF_PSEUDO_11N) + { + priv->SwChnlInProgress=FALSE; + return; //return immediately if it is peudo-phy + } + + do{ + if(!priv->SwChnlInProgress) + break; + + //if(!phy_SwChnlStepByStep(dev, priv->CurrentChannel, &priv->SwChnlStage, &priv->SwChnlStep, &delay)) + if(!phy_SwChnlStepByStep(dev, priv->chan, &priv->SwChnlStage, &priv->SwChnlStep, &delay)) + { + if(delay>0) + { + mdelay(delay); + //PlatformSetTimer(dev, &priv->SwChnlTimer, delay); + //mod_timer(&priv->SwChnlTimer, jiffies + MSECS(delay)); + //==>PHY_SwChnlCallback8192S(dev); for 92se + //==>SwChnlCallback8192SUsb(dev) for 92su + } + else + continue; + } + else + { + priv->SwChnlInProgress=FALSE; + break; + } + }while(true); +} + +// Call after initialization +//extern void PHY_SwChnl8192S(struct net_device* dev, u8 channel) +u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + //u8 tmpchannel =channel; + //bool bResult = false; + + if(!priv->up) + return false; + + if(priv->SwChnlInProgress) + return false; + + if(priv->SetBWModeInProgress) + return false; + + //-------------------------------------------- + switch(priv->ieee80211->mode) + { + case WIRELESS_MODE_A: + case WIRELESS_MODE_N_5G: + if (channel<=14){ + RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14"); + return false; + } + break; + + case WIRELESS_MODE_B: + if (channel>14){ + RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14"); + return false; + } + break; + + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + if (channel>14){ + RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14"); + return false; + } + break; + + default: + ;//RT_TRACE(COMP_ERR, "Invalid WirelessMode(%#x)!!\n", priv->ieee80211->mode); + break; + } + //-------------------------------------------- + + priv->SwChnlInProgress = TRUE; + if( channel == 0) + channel = 1; + + priv->chan=channel; + + priv->SwChnlStage=0; + priv->SwChnlStep=0; + + if((priv->up))// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower)) + { +#ifdef RTL8192SE + PHY_SwChnlCallback8192S(dev); +#elif defined(RTL8192SU) + SwChnlCallback8192SUsbWorkItem(dev); +#endif +#ifdef TO_DO_LIST + if(bResult) + { + RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress TRUE schdule workitem done\n"); + } + else + { + RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress FALSE schdule workitem error\n"); + priv->SwChnlInProgress = false; + priv->CurrentChannel = tmpchannel; + } +#endif + } + else + { + RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress FALSE driver sleep or unload\n"); + priv->SwChnlInProgress = false; + //priv->CurrentChannel = tmpchannel; + } + return true; +} + + +// +// Description: +// Switch channel synchronously. Called by SwChnlByDelayHandler. +// +// Implemented by Bruce, 2008-02-14. +// The following procedure is operted according to SwChanlCallback8190Pci(). +// However, this procedure is performed synchronously which should be running under +// passive level. +// +//not understant it +void PHY_SwChnlPhy8192S( // Only called during initialize + struct net_device* dev, + u8 channel + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + RT_TRACE(COMP_SCAN, "==>PHY_SwChnlPhy8192S(), switch to channel %d.\n", priv->chan); + +#ifdef TO_DO_LIST + // Cannot IO. + if(RT_CANNOT_IO(dev)) + return; +#endif + + // Channel Switching is in progress. + if(priv->SwChnlInProgress) + return; + + //return immediately if it is peudo-phy + if(priv->rf_chip == RF_PSEUDO_11N) + { + priv->SwChnlInProgress=FALSE; + return; + } + + priv->SwChnlInProgress = TRUE; + if( channel == 0) + channel = 1; + + priv->chan=channel; + + priv->SwChnlStage = 0; + priv->SwChnlStep = 0; + + phy_FinishSwChnlNow(dev,channel); + + priv->SwChnlInProgress = FALSE; +} + +// use in phy only +static bool +phy_SetSwChnlCmdArray( + SwChnlCmd* CmdTable, + u32 CmdTableIdx, + u32 CmdTableSz, + SwChnlCmdID CmdID, + u32 Para1, + u32 Para2, + u32 msDelay + ) +{ + SwChnlCmd* pCmd; + + if(CmdTable == NULL) + { + //RT_ASSERT(FALSE, ("phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n")); + return FALSE; + } + if(CmdTableIdx >= CmdTableSz) + { + //RT_ASSERT(FALSE, + // ("phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n", + //CmdTableIdx, CmdTableSz)); + return FALSE; + } + + pCmd = CmdTable + CmdTableIdx; + pCmd->CmdID = CmdID; + pCmd->Para1 = Para1; + pCmd->Para2 = Para2; + pCmd->msDelay = msDelay; + + return TRUE; +} + +// use in phy only +static bool +phy_SwChnlStepByStep( + struct net_device* dev, + u8 channel, + u8 *stage, + u8 *step, + u32 *delay + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + //PCHANNEL_ACCESS_SETTING pChnlAccessSetting; + SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; + u32 PreCommonCmdCnt; + SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; + u32 PostCommonCmdCnt; + SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; + u32 RfDependCmdCnt; + SwChnlCmd *CurrentCmd = NULL; + u8 eRFPath; + + //RT_ASSERT((dev != NULL), ("Adapter should not be NULL\n")); + //RT_ASSERT(IsLegalChannel(dev, channel), ("illegal channel: %d\n", channel)); + RT_TRACE(COMP_CH, "===========>%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step); + //RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n")); +#ifdef ENABLE_DOT11D + if (!IsLegalChannel(priv->ieee80211, channel)) + { + RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel); + return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop. + } +#endif + + //pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting; + //RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n")); + + //for(eRFPath = RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++) + //for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) + //{ + // <1> Fill up pre common command. + PreCommonCmdCnt = 0; + phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, + CmdID_SetTxPowerLevel, 0, 0, 0); + phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, + CmdID_End, 0, 0, 0); + + // <2> Fill up post common command. + PostCommonCmdCnt = 0; + + phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT, + CmdID_End, 0, 0, 0); + + // <3> Fill up RF dependent command. + RfDependCmdCnt = 0; + switch( priv->rf_chip ) + { + case RF_8225: + if (channel < 1 || channel > 14) + RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel); + //RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); + // 2008/09/04 MH Change channel. + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, rRfChannel, channel, 10); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_8256: + if (channel < 1 || channel > 14) + RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel); + // TEST!! This is not the table for 8256!! + //RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, rRfChannel, channel, 10); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_6052: + if (channel < 1 || channel > 14) + RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, RF_CHNLBW, channel, 10); + phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_8258: + break; + + default: + //RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip)); + return FALSE; + break; + } + + + do{ + switch(*stage) + { + case 0: + CurrentCmd=&PreCommonCmd[*step]; + break; + case 1: + CurrentCmd=&RfDependCmd[*step]; + break; + case 2: + CurrentCmd=&PostCommonCmd[*step]; + break; + } + + if(CurrentCmd->CmdID==CmdID_End) + { + if((*stage)==2) + { + return TRUE; + } + else + { + (*stage)++; + (*step)=0; + continue; + } + } + + switch(CurrentCmd->CmdID) + { + case CmdID_SetTxPowerLevel: + //if(priv->card_8192_version > VERSION_8190_BD) + PHY_SetTxPowerLevel8192S(dev,channel); + break; + case CmdID_WritePortUlong: + write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2); + break; + case CmdID_WritePortUshort: + write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2); + break; + case CmdID_WritePortUchar: + write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2); + break; + case CmdID_RF_WriteReg: // Only modify channel for the register now !!!!! + for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) + { +#if (defined RTL8192SE ||defined RTL8192SU ) + // For new T65 RF 0222d register 0x18 bit 0-9 = channel number. + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f, (CurrentCmd->Para2)); + //printk("====>%x, %x, read_back:%x\n", CurrentCmd->Para2,CurrentCmd->Para1, rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f)); +#else + rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, ((CurrentCmd->Para2)<<7)); +#endif + } + break; + default: + break; + } + + break; + }while(TRUE); + //cosa }/*for(Number of RF paths)*/ + + (*delay)=CurrentCmd->msDelay; + (*step)++; + RT_TRACE(COMP_CH, "<===========%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step); + return FALSE; +} + +//called PHY_SwChnlPhy8192S, SwChnlCallback8192SUsbWorkItem +// use in phy only +static void +phy_FinishSwChnlNow( // We should not call this function directly + struct net_device* dev, + u8 channel + ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 delay; + + while(!phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) + { + if(delay>0) + mdelay(delay); + if(!priv->up) + break; + } +} + + +/*----------------------------------------------------------------------------- + * Function: PHYCheckIsLegalRfPath8190Pci() + * + * Overview: Check different RF type to execute legal judgement. If RF Path is illegal + * We will return false. + * + * Input: NONE + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/15/2007 MHC Create Version 0. + * + *---------------------------------------------------------------------------*/ + //called by rtl8192_phy_QueryRFReg, rtl8192_phy_SetRFReg, PHY_SetRFPowerState8192SUsb +//extern bool +//PHY_CheckIsLegalRfPath8192S( +// struct net_device* dev, +// u32 eRFPath) +u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath) +{ +// struct r8192_priv *priv = ieee80211_priv(dev); + bool rtValue = TRUE; + + // NOt check RF Path now.! +#if 0 + if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A) + { + rtValue = FALSE; + } + if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A) + { + + } +#endif + return rtValue; + +} /* PHY_CheckIsLegalRfPath8192S */ + + + +/*----------------------------------------------------------------------------- + * Function: PHY_IQCalibrate8192S() + * + * Overview: After all MAC/PHY/RF is configued. We must execute IQ calibration + * to improve RF EVM!!? + * + * Input: IN PADAPTER pAdapter + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 10/07/2008 MHC Create. Document from SD3 RFSI Jenyu. + * + *---------------------------------------------------------------------------*/ + //called by InitializeAdapter8192SE +void +PHY_IQCalibrate( struct net_device* dev) +{ + //struct r8192_priv *priv = ieee80211_priv(dev); + u32 i, reg; + u32 old_value; + long X, Y, TX0[4]; + u32 TXA[4]; + + // 1. Check QFN68 or 64 92S (Read from EEPROM) + + // + // 2. QFN 68 + // + // For 1T2R IQK only now !!! + for (i = 0; i < 10; i++) + { + // IQK + rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05430); + //PlatformStallExecution(5); + udelay(5); + rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000800e4); + udelay(5); + rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x80800000); + udelay(5); + rtl8192_setBBreg(dev, 0xe40, bMaskDWord, 0x02140148); + udelay(5); + rtl8192_setBBreg(dev, 0xe44, bMaskDWord, 0x681604a2); + udelay(5); + rtl8192_setBBreg(dev, 0xe4c, bMaskDWord, 0x000028d1); + udelay(5); + rtl8192_setBBreg(dev, 0xe60, bMaskDWord, 0x0214014d); + udelay(5); + rtl8192_setBBreg(dev, 0xe64, bMaskDWord, 0x281608ba); + udelay(5); + rtl8192_setBBreg(dev, 0xe6c, bMaskDWord, 0x000028d1); + udelay(5); + rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000001); + udelay(5); + rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000001); + udelay(2000); + rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05433); + udelay(5); + rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000000e4); + udelay(5); + rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x0); + + + reg = rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord); + + // Readback IQK value and rewrite + if (!(reg&(BIT27|BIT28|BIT30|BIT31))) + { + old_value = (rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord) & 0x3FF); + + // Calibrate init gain for A path for TX0 + X = (rtl8192_QueryBBReg(dev, 0xe94, bMaskDWord) & 0x03FF0000)>>16; + TXA[RF90_PATH_A] = (X * old_value)/0x100; + reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord); + reg = (reg & 0xFFFFFC00) | (u32)TXA[RF90_PATH_A]; + rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg); + udelay(5); + + // Calibrate init gain for C path for TX0 + Y = ( rtl8192_QueryBBReg(dev, 0xe9C, bMaskDWord) & 0x03FF0000)>>16; + TX0[RF90_PATH_C] = ((Y * old_value)/0x100); + reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord); + reg = (reg & 0xffc0ffff) |((u32) (TX0[RF90_PATH_C]&0x3F)<<16); + rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg); + reg = rtl8192_QueryBBReg(dev, 0xc94, bMaskDWord); + reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28); + rtl8192_setBBreg(dev, 0xc94, bMaskDWord, reg); + udelay(5); + + // Calibrate RX A and B for RX0 + reg = rtl8192_QueryBBReg(dev, 0xc14, bMaskDWord); + X = (rtl8192_QueryBBReg(dev, 0xea4, bMaskDWord) & 0x03FF0000)>>16; + reg = (reg & 0xFFFFFC00) |X; + rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg); + Y = (rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord) & 0x003F0000)>>16; + reg = (reg & 0xFFFF03FF) |Y<<10; + rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg); + udelay(5); + old_value = (rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord) & 0x3FF); + + // Calibrate init gain for A path for TX1 !!!!!! + X = (rtl8192_QueryBBReg(dev, 0xeb4, bMaskDWord) & 0x03FF0000)>>16; + reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord); + TXA[RF90_PATH_A] = (X * old_value) / 0x100; + reg = (reg & 0xFFFFFC00) | TXA[RF90_PATH_A]; + rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg); + udelay(5); + + // Calibrate init gain for C path for TX1 + Y = (rtl8192_QueryBBReg(dev, 0xebc, bMaskDWord)& 0x03FF0000)>>16; + TX0[RF90_PATH_C] = ((Y * old_value)/0x100); + reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord); + reg = (reg & 0xffc0ffff) |( (TX0[RF90_PATH_C]&0x3F)<<16); + rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg); + reg = rtl8192_QueryBBReg(dev, 0xc9c, bMaskDWord); + reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28); + rtl8192_setBBreg(dev, 0xc9c, bMaskDWord, reg); + udelay(5); + + // Calibrate RX A and B for RX1 + reg = rtl8192_QueryBBReg(dev, 0xc1c, bMaskDWord); + X = (rtl8192_QueryBBReg(dev, 0xec4, bMaskDWord) & 0x03FF0000)>>16; + reg = (reg & 0xFFFFFC00) |X; + rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg); + + Y = (rtl8192_QueryBBReg(dev, 0xecc, bMaskDWord) & 0x003F0000)>>16; + reg = (reg & 0xFFFF03FF) |Y<<10; + rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg); + udelay(5); + + RT_TRACE(COMP_INIT, "PHY_IQCalibrate OK\n"); + break; + } + + } + + + // + // 3. QFN64. Not enabled now !!! We must use different gain table for 1T2R. + // + + +} + +/*----------------------------------------------------------------------------- + * Function: PHY_IQCalibrateBcut() + * + * Overview: After all MAC/PHY/RF is configued. We must execute IQ calibration + * to improve RF EVM!!? + * + * Input: IN PADAPTER pAdapter + * + * Output: NONE + * + * Return: NONE + * + * Revised History: + * When Who Remark + * 11/18/2008 MHC Create. Document from SD3 RFSI Jenyu. + * 92S B-cut QFN 68 pin IQ calibration procedure.doc + * + *---------------------------------------------------------------------------*/ +extern void PHY_IQCalibrateBcut(struct net_device* dev) +{ + //struct r8192_priv *priv = ieee80211_priv(dev); + //PMGNT_INFO pMgntInfo = &pAdapter->MgntInfo; + u32 i, reg; + u32 old_value; + long X, Y, TX0[4]; + u32 TXA[4]; + u32 calibrate_set[13] = {0}; + u32 load_value[13]; + u8 RfPiEnable=0; + + // 0. Check QFN68 or 64 92S (Read from EEPROM/EFUSE) + + // + // 1. Save e70~ee0 register setting, and load calibration setting + // + /* + 0xee0[31:0]=0x3fed92fb; + 0xedc[31:0] =0x3fed92fb; + 0xe70[31:0] =0x3fed92fb; + 0xe74[31:0] =0x3fed92fb; + 0xe78[31:0] =0x3fed92fb; + 0xe7c[31:0]= 0x3fed92fb; + 0xe80[31:0]= 0x3fed92fb; + 0xe84[31:0]= 0x3fed92fb; + 0xe88[31:0]= 0x3fed92fb; + 0xe8c[31:0]= 0x3fed92fb; + 0xed0[31:0]= 0x3fed92fb; + 0xed4[31:0]= 0x3fed92fb; + 0xed8[31:0]= 0x3fed92fb; + */ + calibrate_set [0] = 0xee0; + calibrate_set [1] = 0xedc; + calibrate_set [2] = 0xe70; + calibrate_set [3] = 0xe74; + calibrate_set [4] = 0xe78; + calibrate_set [5] = 0xe7c; + calibrate_set [6] = 0xe80; + calibrate_set [7] = 0xe84; + calibrate_set [8] = 0xe88; + calibrate_set [9] = 0xe8c; + calibrate_set [10] = 0xed0; + calibrate_set [11] = 0xed4; + calibrate_set [12] = 0xed8; + //RT_TRACE(COMP_INIT, DBG_LOUD, ("Save e70~ee0 register setting\n")); + for (i = 0; i < 13; i++) + { + load_value[i] = rtl8192_QueryBBReg(dev, calibrate_set[i], bMaskDWord); + rtl8192_setBBreg(dev, calibrate_set[i], bMaskDWord, 0x3fed92fb); + + } + + RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter1, BIT8); + + // + // 2. QFN 68 + // + // For 1T2R IQK only now !!! + for (i = 0; i < 10; i++) + { + RT_TRACE(COMP_INIT, "IQK -%d\n", i); + //BB switch to PI mode. If default is PI mode, ignoring 2 commands below. + if (!RfPiEnable) //if original is SI mode, then switch to PI mode. + { + //DbgPrint("IQK Switch to PI mode\n"); + rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000100); + rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000100); + } + + // IQK + // 2. IQ calibration & LO leakage calibration + rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05430); + udelay(5); + rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000800e4); + udelay(5); + rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x80800000); + udelay(5); + //path-A IQ K and LO K gain setting + rtl8192_setBBreg(dev, 0xe40, bMaskDWord, 0x02140102); + udelay(5); + rtl8192_setBBreg(dev, 0xe44, bMaskDWord, 0x681604c2); + udelay(5); + //set LO calibration + rtl8192_setBBreg(dev, 0xe4c, bMaskDWord, 0x000028d1); + udelay(5); + //path-B IQ K and LO K gain setting + rtl8192_setBBreg(dev, 0xe60, bMaskDWord, 0x02140102); + udelay(5); + rtl8192_setBBreg(dev, 0xe64, bMaskDWord, 0x28160d05); + udelay(5); + //K idac_I & IQ + rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000000); + udelay(5); + rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000000); + udelay(5); + + // delay 2ms + udelay(2000); + + //idac_Q setting + rtl8192_setBBreg(dev, 0xe6c, bMaskDWord, 0x020028d1); + udelay(5); + //K idac_Q & IQ + rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000000); + udelay(5); + rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000000); + + // delay 2ms + udelay(2000); + + rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05433); + udelay(5); + rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000000e4); + udelay(5); + rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x0); + + if (!RfPiEnable) //if original is SI mode, then switch to PI mode. + { + //DbgPrint("IQK Switch back to SI mode\n"); + rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000000); + rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000000); + } + + + reg = rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord); + + // 3. check fail bit, and fill BB IQ matrix + // Readback IQK value and rewrite + if (!(reg&(BIT27|BIT28|BIT30|BIT31))) + { + old_value = (rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord) & 0x3FF); + + // Calibrate init gain for A path for TX0 + X = (rtl8192_QueryBBReg(dev, 0xe94, bMaskDWord) & 0x03FF0000)>>16; + TXA[RF90_PATH_A] = (X * old_value)/0x100; + reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord); + reg = (reg & 0xFFFFFC00) | (u32)TXA[RF90_PATH_A]; + rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg); + udelay(5); + + // Calibrate init gain for C path for TX0 + Y = ( rtl8192_QueryBBReg(dev, 0xe9C, bMaskDWord) & 0x03FF0000)>>16; + TX0[RF90_PATH_C] = ((Y * old_value)/0x100); + reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord); + reg = (reg & 0xffc0ffff) |((u32) (TX0[RF90_PATH_C]&0x3F)<<16); + rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg); + reg = rtl8192_QueryBBReg(dev, 0xc94, bMaskDWord); + reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28); + rtl8192_setBBreg(dev, 0xc94, bMaskDWord, reg); + udelay(5); + + // Calibrate RX A and B for RX0 + reg = rtl8192_QueryBBReg(dev, 0xc14, bMaskDWord); + X = (rtl8192_QueryBBReg(dev, 0xea4, bMaskDWord) & 0x03FF0000)>>16; + reg = (reg & 0xFFFFFC00) |X; + rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg); + Y = (rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord) & 0x003F0000)>>16; + reg = (reg & 0xFFFF03FF) |Y<<10; + rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg); + udelay(5); + old_value = (rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord) & 0x3FF); + + // Calibrate init gain for A path for TX1 !!!!!! + X = (rtl8192_QueryBBReg(dev, 0xeb4, bMaskDWord) & 0x03FF0000)>>16; + reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord); + TXA[RF90_PATH_A] = (X * old_value) / 0x100; + reg = (reg & 0xFFFFFC00) | TXA[RF90_PATH_A]; + rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg); + udelay(5); + + // Calibrate init gain for C path for TX1 + Y = (rtl8192_QueryBBReg(dev, 0xebc, bMaskDWord)& 0x03FF0000)>>16; + TX0[RF90_PATH_C] = ((Y * old_value)/0x100); + reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord); + reg = (reg & 0xffc0ffff) |( (TX0[RF90_PATH_C]&0x3F)<<16); + rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg); + reg = rtl8192_QueryBBReg(dev, 0xc9c, bMaskDWord); + reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28); + rtl8192_setBBreg(dev, 0xc9c, bMaskDWord, reg); + udelay(5); + + // Calibrate RX A and B for RX1 + reg = rtl8192_QueryBBReg(dev, 0xc1c, bMaskDWord); + X = (rtl8192_QueryBBReg(dev, 0xec4, bMaskDWord) & 0x03FF0000)>>16; + reg = (reg & 0xFFFFFC00) |X; + rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg); + + Y = (rtl8192_QueryBBReg(dev, 0xecc, bMaskDWord) & 0x003F0000)>>16; + reg = (reg & 0xFFFF03FF) |Y<<10; + rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg); + udelay(5); + + RT_TRACE(COMP_INIT, "PHY_IQCalibrate OK\n"); + break; + } + + } + + // + // 4. Reload e70~ee0 register setting. + // + //RT_TRACE(COMP_INIT, DBG_LOUD, ("Reload e70~ee0 register setting.\n")); + for (i = 0; i < 13; i++) + rtl8192_setBBreg(dev, calibrate_set[i], bMaskDWord, load_value[i]); + + + // + // 3. QFN64. Not enabled now !!! We must use different gain table for 1T2R. + // + + + +} // PHY_IQCalibrateBcut + + +// +// Move from phycfg.c to gen.c to be code independent later +// +//-------------------------Move to other DIR later----------------------------*/ +//#if (DEV_BUS_TYPE == USB_INTERFACE) +#ifdef RTL8192SU + +// use in phy only (in win it's timer) +void SwChnlCallback8192SUsb(struct net_device *dev) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + u32 delay; +// bool ret; + + RT_TRACE(COMP_SCAN, "==>SwChnlCallback8190Pci(), switch to channel\ + %d\n", priv->chan); + + + if(!priv->up) + return; + + if(priv->rf_chip == RF_PSEUDO_11N) + { + priv->SwChnlInProgress=FALSE; + return; //return immediately if it is peudo-phy + } + + do{ + if(!priv->SwChnlInProgress) + break; + + if(!phy_SwChnlStepByStep(dev, priv->chan, &priv->SwChnlStage, &priv->SwChnlStep, &delay)) + { + if(delay>0) + { + //PlatformSetTimer(dev, &priv->SwChnlTimer, delay); + + } + else + continue; + } + else + { + priv->SwChnlInProgress=FALSE; + } + break; + }while(TRUE); +} + + +// +// Callback routine of the work item for switch channel. +// +// use in phy only (in win it's work) +void SwChnlCallback8192SUsbWorkItem(struct net_device *dev ) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + RT_TRACE(COMP_TRACE, "==> SwChnlCallback8192SUsbWorkItem()\n"); +#ifdef TO_DO_LIST + if(pAdapter->bInSetPower && RT_USB_CANNOT_IO(pAdapter)) + { + RT_TRACE(COMP_SCAN, DBG_LOUD, ("<== SwChnlCallback8192SUsbWorkItem() SwChnlInProgress FALSE driver sleep or unload\n")); + + pHalData->SwChnlInProgress = FALSE; + return; + } +#endif + phy_FinishSwChnlNow(dev, priv->chan); + priv->SwChnlInProgress = FALSE; + + RT_TRACE(COMP_TRACE, "<== SwChnlCallback8192SUsbWorkItem()\n"); +} + + +/*----------------------------------------------------------------------------- + * Function: SetBWModeCallback8192SUsb() + * + * Overview: Timer callback function for SetSetBWMode + * + * Input: PRT_TIMER pTimer + * + * Output: NONE + * + * Return: NONE + * + * Note: (1) We do not take j mode into consideration now + * (2) Will two workitem of "switch channel" and "switch channel bandwidth" run + * concurrently? + *---------------------------------------------------------------------------*/ +//====>//rtl8192_SetBWMode +// use in phy only (in win it's timer) +void SetBWModeCallback8192SUsb(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 regBwOpMode; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //u32 NowL, NowH; + //u8Byte BeginTime, EndTime; + u8 regRRSR_RSC; + + RT_TRACE(COMP_SCAN, "==>SetBWModeCallback8190Pci() Switch to %s bandwidth\n", \ + priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"); + + if(priv->rf_chip == RF_PSEUDO_11N) + { + priv->SetBWModeInProgress= FALSE; + return; + } + + if(!priv->up) + return; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //NowL = read_nic_dword(dev, TSFR); + //NowH = read_nic_dword(dev, TSFR+4); + //BeginTime = ((u8Byte)NowH << 32) + NowL; + + //3<1>Set MAC register + regBwOpMode = read_nic_byte(dev, BW_OPMODE); + regRRSR_RSC = read_nic_byte(dev, RRSR+2); + + switch(priv->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + regBwOpMode |= BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; + + case HT_CHANNEL_WIDTH_20_40: + regBwOpMode &= ~BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + + regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5); + write_nic_byte(dev, RRSR+2, regRRSR_RSC); + break; + + default: + RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci():\ + unknown Bandwidth: %#X\n",priv->CurrentChannelBW); + break; + } + + //3 <2>Set PHY related register + switch(priv->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); + #if 0 //LZM090219 + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3); + + // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207 + //write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000); + //write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317); + //write_nic_dword(dev, rCCK0_DebugPort, 0x00000204); + rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000); + rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317); + rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3); + #endif + + if (priv->card_8192_version >= VERSION_8192S_BCUT) + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58); + + break; + case HT_CHANNEL_WIDTH_20_40: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); + rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); + + // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207 + //PHY_SetBBReg(Adapter, rCCK0_TxFilter1, bMaskDWord, 0x35360000); + //PHY_SetBBReg(Adapter, rCCK0_TxFilter2, bMaskDWord, 0x121c252e); + //PHY_SetBBReg(Adapter, rCCK0_DebugPort, bMaskDWord, 0x00000409); + //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, bADClkPhase, 0); + + if (priv->card_8192_version >= VERSION_8192S_BCUT) + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18); + + break; + default: + RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci(): unknown Bandwidth: %#X\n"\ + ,priv->CurrentChannelBW); + break; + + } + //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //NowL = read_nic_dword(dev, TSFR); + //NowH = read_nic_dword(dev, TSFR+4); + //EndTime = ((u8Byte)NowH << 32) + NowL; + //RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime))); + +#if 1 + //3<3>Set RF related register + switch( priv->rf_chip ) + { + case RF_8225: + PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8256: + // Please implement this function in Hal8190PciPhy8256.c + //PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_6052: + PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8258: + // Please implement this function in Hal8190PciPhy8258.c + // PHY_SetRF8258Bandwidth(); + break; + + case RF_PSEUDO_11N: + // Do Nothing + break; + + default: + //RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip)); + break; + } +#endif + priv->SetBWModeInProgress= FALSE; + + RT_TRACE(COMP_SCAN, "<==SetBWMode8190Pci()" ); +} + +// +// Callback routine of the work item for set bandwidth mode. +// +// use in phy only (in win it's work) +void SetBWModeCallback8192SUsbWorkItem(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 regBwOpMode; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //u32 NowL, NowH; + //u8Byte BeginTime, EndTime; + u8 regRRSR_RSC; + + RT_TRACE(COMP_SCAN, "==>SetBWModeCallback8192SUsbWorkItem() Switch to %s bandwidth\n", \ + priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"); + + if(priv->rf_chip == RF_PSEUDO_11N) + { + priv->SetBWModeInProgress= FALSE; + return; + } + + if(!priv->up) + return; + + // Added it for 20/40 mhz switch time evaluation by guangan 070531 + //NowL = read_nic_dword(dev, TSFR); + //NowH = read_nic_dword(dev, TSFR+4); + //BeginTime = ((u8Byte)NowH << 32) + NowL; + + //3<1>Set MAC register + regBwOpMode = read_nic_byte(dev, BW_OPMODE); + regRRSR_RSC = read_nic_byte(dev, RRSR+2); + + switch(priv->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + regBwOpMode |= BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; + + case HT_CHANNEL_WIDTH_20_40: + regBwOpMode &= ~BW_OPMODE_20MHZ; + // 2007/02/07 Mark by Emily becasue we have not verify whether this register works + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5); + write_nic_byte(dev, RRSR+2, regRRSR_RSC); + + break; + + default: + RT_TRACE(COMP_DBG, "SetBWModeCallback8192SUsbWorkItem():\ + unknown Bandwidth: %#X\n",priv->CurrentChannelBW); + break; + } + + //3 <2>Set PHY related register + switch(priv->CurrentChannelBW) + { + case HT_CHANNEL_WIDTH_20: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); + + #if 0 //LZM 090219 + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 1); + + // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207 + rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000); + rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317); + rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1); + #endif + + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58); + + break; + case HT_CHANNEL_WIDTH_20_40: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); + #if 0 //LZM 090219 + rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); + + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 0); + + rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); + // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207 + rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000); + rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e); + rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409); + #endif + + // Set Control channel to upper or lower. These settings are required only for 40MHz + rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); + rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); + + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18); + + break; + + + default: + RT_TRACE(COMP_DBG, "SetBWModeCallback8192SUsbWorkItem(): unknown Bandwidth: %#X\n"\ + ,priv->CurrentChannelBW); + break; + + } + //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 + + //3<3>Set RF related register + switch( priv->rf_chip ) + { + case RF_8225: + PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8256: + // Please implement this function in Hal8190PciPhy8256.c + //PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_6052: + PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8258: + // Please implement this function in Hal8190PciPhy8258.c + // PHY_SetRF8258Bandwidth(); + break; + + case RF_PSEUDO_11N: + // Do Nothing + break; + + default: + //RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip)); + break; + } + + priv->SetBWModeInProgress= FALSE; + + RT_TRACE(COMP_SCAN, "<==SetBWModeCallback8192SUsbWorkItem()" ); +} + +//--------------------------Move to oter DIR later-------------------------------*/ +#ifdef RTL8192SU +void InitialGain8192S(struct net_device *dev, u8 Operation) +{ +#ifdef TO_DO_LIST + struct r8192_priv *priv = ieee80211_priv(dev); +#endif + +} +#endif + +void InitialGain819xUsb(struct net_device *dev, u8 Operation) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + priv->InitialGainOperateType = Operation; + + if(priv->up) + { + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0); + #else + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + schedule_task(&priv->initialgain_operate_wq); + #else + queue_work(priv->priv_wq,&priv->initialgain_operate_wq); + #endif + #endif + } +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) +extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) +{ + struct delayed_work *dwork = container_of(work,struct delayed_work,work); + struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq); + struct net_device *dev = priv->ieee80211->dev; +#else +extern void InitialGainOperateWorkItemCallBack(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); +#endif +#define SCAN_RX_INITIAL_GAIN 0x17 +#define POWER_DETECTION_TH 0x08 + u32 BitMask; + u8 initial_gain; + u8 Operation; + + Operation = priv->InitialGainOperateType; + + switch(Operation) + { + case IG_Backup: + RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); + initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];// + BitMask = bMaskByte0; + if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF + priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask); + priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask); + priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask); + priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask); + BitMask = bMaskByte2; + priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask); + + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain); + write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); + RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH); + write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH); + break; + case IG_Restore: + RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n"); + BitMask = 0x7f; //Bit0~ Bit6 + if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF + + rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1); + rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1); + rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1); + rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1); + BitMask = bMaskByte2; + rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca); + + PHY_SetTxPowerLevel8192S(dev,priv->ieee80211->current_network.channel); + + if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON + break; + default: + RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n"); + break; + } +} + +#endif // #if (DEV_BUS_TYPE == USB_INTERFACE) + +//----------------------------------------------------------------------------- +// Description: +// Schedule workitem to send specific CMD IO to FW. +// Added by Roger, 2008.12.03. +// +//----------------------------------------------------------------------------- +bool HalSetFwCmd8192S(struct net_device* dev, FW_CMD_IO_TYPE FwCmdIO) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u16 FwCmdWaitCounter = 0; + + u16 FwCmdWaitLimit = 1000; + + //if(IS_HARDWARE_TYPE_8192SU(Adapter) && Adapter->bInHctTest) + if(priv->bInHctTest) + return true; + + RT_TRACE(COMP_CMD, "-->HalSetFwCmd8192S(): Set FW Cmd(%x), SetFwCmdInProgress(%d)\n", (u32)FwCmdIO, priv->SetFwCmdInProgress); + + // Will be done by high power respectively. + if(FwCmdIO==FW_CMD_DIG_HALT || FwCmdIO==FW_CMD_DIG_RESUME) + { + RT_TRACE(COMP_CMD, "<--HalSetFwCmd8192S(): Set FW Cmd(%x)\n", (u32)FwCmdIO); + return false; + } + +#if 1 + while(priv->SetFwCmdInProgress && FwCmdWaitCounter<FwCmdWaitLimit) + { + //if(RT_USB_CANNOT_IO(Adapter)) + //{ + // RT_TRACE(COMP_CMD, DBG_WARNING, ("HalSetFwCmd8192S(): USB can NOT IO!!\n")); + // return FALSE; + //} + + RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): previous workitem not finish!!\n"); + return false; + FwCmdWaitCounter ++; + RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): Wait 10 ms (%d times)...\n", FwCmdWaitCounter); + udelay(100); + } + + if(FwCmdWaitCounter == FwCmdWaitLimit) + { + //RT_ASSERT(FALSE, ("SetFwCmdIOWorkItemCallback(): Wait too logn to set FW CMD\n")); + RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): Wait too logn to set FW CMD\n"); + //return false; + } +#endif + if (priv->SetFwCmdInProgress) + { + RT_TRACE(COMP_ERR, "<--HalSetFwCmd8192S(): Set FW Cmd(%#x)\n", FwCmdIO); + return false; + } + priv->SetFwCmdInProgress = TRUE; + priv->CurrentFwCmdIO = FwCmdIO; // Update current FW Cmd for callback use. + + phy_SetFwCmdIOCallback(dev); + return true; +} +void ChkFwCmdIoDone(struct net_device* dev) +{ + u16 PollingCnt = 1000; + u32 tmpValue; + + do + {// Make sure that CMD IO has be accepted by FW. +#ifdef TO_DO_LIST + if(RT_USB_CANNOT_IO(Adapter)) + { + RT_TRACE(COMP_CMD, "ChkFwCmdIoDone(): USB can NOT IO!!\n"); + return; + } +#endif + udelay(10); // sleep 20us + tmpValue = read_nic_dword(dev, WFM5); + if(tmpValue == 0) + { + RT_TRACE(COMP_CMD, "[FW CMD] Set FW Cmd success!!\n"); + break; + } + else + { + RT_TRACE(COMP_CMD, "[FW CMD] Polling FW Cmd PollingCnt(%d)!!\n", PollingCnt); + } + }while( --PollingCnt ); + + if(PollingCnt == 0) + { + RT_TRACE(COMP_ERR, "[FW CMD] Set FW Cmd fail!!\n"); + } +} +// Callback routine of the timer callback for FW Cmd IO. +// +// Description: +// This routine will send specific CMD IO to FW and check whether it is done. +// +void phy_SetFwCmdIOCallback(struct net_device* dev) +{ + //struct net_device* dev = (struct net_device*) data; + u32 input; + static u32 ScanRegister; + struct r8192_priv *priv = ieee80211_priv(dev); + if(!priv->up) + { + RT_TRACE(COMP_CMD, "SetFwCmdIOTimerCallback(): driver is going to unload\n"); + return; + } + + RT_TRACE(COMP_CMD, "--->SetFwCmdIOTimerCallback(): Cmd(%#x), SetFwCmdInProgress(%d)\n", priv->CurrentFwCmdIO, priv->SetFwCmdInProgress); + + switch(priv->CurrentFwCmdIO) + { + case FW_CMD_HIGH_PWR_ENABLE: + if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0) + write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE); + break; + + case FW_CMD_HIGH_PWR_DISABLE: + write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE); + break; + + case FW_CMD_DIG_RESUME: + write_nic_dword(dev, WFM5, FW_DIG_RESUME); + break; + + case FW_CMD_DIG_HALT: + write_nic_dword(dev, WFM5, FW_DIG_HALT); + break; + + // + // <Roger_Notes> The following FW CMD IO was combined into single operation + // (i.e., to prevent number of system workitem out of resource!!). + // 2008.12.04. + // + case FW_CMD_RESUME_DM_BY_SCAN: + RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR enable and DIG resume!!\n"); + if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0) + { + write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE); //break; + ChkFwCmdIoDone(dev); + } + write_nic_dword(dev, WFM5, FW_DIG_RESUME); + break; + + case FW_CMD_PAUSE_DM_BY_SCAN: + RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR disable and DIG halt!!\n"); + write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE); //break; + ChkFwCmdIoDone(dev); + write_nic_dword(dev, WFM5, FW_DIG_HALT); + break; + + // + // <Roger_Notes> The following FW CMD IO should be checked + // (i.e., workitem schedule timing issue!!). + // 2008.12.04. + // + case FW_CMD_DIG_DISABLE: + RT_TRACE(COMP_CMD, "[FW CMD] Set DIG disable!!\n"); + write_nic_dword(dev, WFM5, FW_DIG_DISABLE); + break; + + case FW_CMD_DIG_ENABLE: + RT_TRACE(COMP_CMD, "[FW CMD] Set DIG enable!!\n"); + write_nic_dword(dev, WFM5, FW_DIG_ENABLE); + break; + + case FW_CMD_RA_RESET: + write_nic_dword(dev, WFM5, FW_RA_RESET); + break; + + case FW_CMD_RA_ACTIVE: + write_nic_dword(dev, WFM5, FW_RA_ACTIVE); + break; + + case FW_CMD_RA_REFRESH_N: + RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! N\n"); + if(priv->ieee80211->pHTInfo->IOTRaFunc & HT_IOT_RAFUNC_DISABLE_ALL) + input = FW_RA_REFRESH; + else + input = FW_RA_REFRESH | (priv->ieee80211->pHTInfo->IOTRaFunc << 8); + write_nic_dword(dev, WFM5, input); + break; + case FW_CMD_RA_REFRESH_BG: + RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! B/G\n"); + write_nic_dword(dev, WFM5, FW_RA_REFRESH); + ChkFwCmdIoDone(dev); + write_nic_dword(dev, WFM5, FW_RA_ENABLE_BG); + break; + + case FW_CMD_IQK_ENABLE: + write_nic_dword(dev, WFM5, FW_IQK_ENABLE); + break; + + case FW_CMD_TXPWR_TRACK_ENABLE: + write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_ENABLE); + break; + + case FW_CMD_TXPWR_TRACK_DISABLE: + write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_DISABLE); + break; + + default: + RT_TRACE(COMP_CMD,"Unknown FW Cmd IO(%#x)\n", priv->CurrentFwCmdIO); + break; + } + + ChkFwCmdIoDone(dev); + + switch(priv->CurrentFwCmdIO) + { + case FW_CMD_HIGH_PWR_DISABLE: + //if(pMgntInfo->bTurboScan) + { + //Lower initial gain + rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x17); + rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x17); + // CCA threshold + rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x40); + // Disable OFDM Part + rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x1); + ScanRegister = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector1,bMaskDWord); + rtl8192_setBBreg(dev, rOFDM0_RxDetector1, 0xf, 0xf); + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0); + } + break; + + case FW_CMD_HIGH_PWR_ENABLE: + //if(pMgntInfo->bTurboScan) + { + rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x36); + rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x36); + + // CCA threshold + rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x83); + // Enable OFDM Part + rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x0); + + //LZM ADD because sometimes there is no FW_CMD_HIGH_PWR_DISABLE, this value will be 0. + if(ScanRegister != 0){ + rtl8192_setBBreg(dev, rOFDM0_RxDetector1, bMaskDWord, ScanRegister); + } + + if(priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R) + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3); + else + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x1); + } + break; + } + + priv->SetFwCmdInProgress = false;// Clear FW CMD operation flag. + RT_TRACE(COMP_CMD, "<---SetFwCmdIOWorkItemCallback()\n"); + +} + |