diff options
author | Alan Cox <alan@linux.intel.com> | 2009-08-27 11:02:25 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-09-15 12:02:29 -0700 |
commit | b8c4cc46541d864b37497d0047b81b62a5d4e073 (patch) | |
tree | 7709393cc60976d97baa2e3b1d2c8aac5b01cd95 /drivers/staging | |
parent | 2211b732ba8050bc228e129cdc30b4fdedcbea86 (diff) |
Staging: et131x: put the jagcore routines in with their users
We have two trivial IRQ routines, a single statement and a real function -
relocate them. While we are at it kill the trivial to sort out soft reset
and slv bits in the same areas of code.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/et131x/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_address_map.h | 56 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_jagcore.c | 214 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_initpci.c | 77 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_isr.c | 43 |
5 files changed, 128 insertions, 263 deletions
diff --git a/drivers/staging/et131x/Makefile b/drivers/staging/et131x/Makefile index 3ddbc64aa5f..111049405cb 100644 --- a/drivers/staging/et131x/Makefile +++ b/drivers/staging/et131x/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_ET131X) += et131x.o et131x-objs := et1310_eeprom.o \ - et1310_jagcore.o \ et1310_mac.o \ et1310_phy.o \ et1310_pm.o \ diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h index c4b0a4f2b84..6dea0d91110 100644 --- a/drivers/staging/et131x/et1310_address_map.h +++ b/drivers/staging/et131x/et1310_address_map.h @@ -116,52 +116,20 @@ */ /* - * structure for software reset reg in global address map - * located at address 0x0028 + * Software reset reg at address 0x0028 + * 0: txdma_sw_reset + * 1: rxdma_sw_reset + * 2: txmac_sw_reset + * 3: rxmac_sw_reset + * 4: mac_sw_reset + * 5: mac_stat_sw_reset + * 6: mmc_sw_reset + *31: selfclr_disable */ -typedef union _SW_RESET_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 selfclr_disable:1; /* bit 31 */ - u32 unused:24; /* bits 7-30 */ - u32 mmc_sw_reset:1; /* bit 6 */ - u32 mac_stat_sw_reset:1; /* bit 5 */ - u32 mac_sw_reset:1; /* bit 4 */ - u32 rxmac_sw_reset:1; /* bit 3 */ - u32 txmac_sw_reset:1; /* bit 2 */ - u32 rxdma_sw_reset:1; /* bit 1 */ - u32 txdma_sw_reset:1; /* bit 0 */ -#else - u32 txdma_sw_reset:1; /* bit 0 */ - u32 rxdma_sw_reset:1; /* bit 1 */ - u32 txmac_sw_reset:1; /* bit 2 */ - u32 rxmac_sw_reset:1; /* bit 3 */ - u32 mac_sw_reset:1; /* bit 4 */ - u32 mac_stat_sw_reset:1; /* bit 5 */ - u32 mmc_sw_reset:1; /* bit 6 */ - u32 unused:24; /* bits 7-30 */ - u32 selfclr_disable:1; /* bit 31 */ -#endif - } bits; -} SW_RESET_t, *PSW_RESET_t; /* - * structure for SLV Timer reg in global address map - * located at address 0x002C + * SLV Timer reg at address 0x002C (low 24 bits) */ -typedef union _SLV_TIMER_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:8; /* bits 24-31 */ - u32 timer_ini:24; /* bits 0-23 */ -#else - u32 timer_ini:24; /* bits 0-23 */ - u32 unused:8; /* bits 24-31 */ -#endif - } bits; -} SLV_TIMER_t, *PSLV_TIMER_t; /* * structure for MSI Configuration reg in global address map @@ -218,8 +186,8 @@ typedef struct _GLOBAL_t { /* Location: */ u32 int_mask; /* 0x001C */ u32 int_alias_clr_en; /* 0x0020 */ u32 int_status_alias; /* 0x0024 */ - SW_RESET_t sw_reset; /* 0x0028 */ - SLV_TIMER_t slv_timer; /* 0x002C */ + u32 sw_reset; /* 0x0028 */ + u32 slv_timer; /* 0x002C */ MSI_CONFIG_t msi_config; /* 0x0030 */ LOOPBACK_t loopback; /* 0x0034 */ u32 watchdog_timer; /* 0x0038 */ diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c deleted file mode 100644 index ff238ef9728..00000000000 --- a/drivers/staging/et131x/et1310_jagcore.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et1310_jagcore.c - All code pertaining to the ET1301/ET131x's JAGcore - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/bitops.h> -#include <asm/system.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_initpci.h" - -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - -/** - * ConfigGlobalRegs - Used to configure the global registers on the JAGCore - * @pAdpater: pointer to our adapter structure - */ -void ConfigGlobalRegs(struct et131x_adapter *etdev) -{ - struct _GLOBAL_t __iomem *pGbl = &etdev->regs->global; - - DBG_ENTER(et131x_dbginfo); - - if (etdev->RegistryPhyLoopbk == false) { - if (etdev->RegistryJumboPacket < 2048) { - /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word - * block of RAM that the driver can split between Tx - * and Rx as it desires. Our default is to split it - * 50/50: - */ - writel(0, &pGbl->rxq_start_addr); - writel(PARM_RX_MEM_END_DEF, &pGbl->rxq_end_addr); - writel(PARM_RX_MEM_END_DEF + 1, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); - } else if (etdev->RegistryJumboPacket < 8192) { - /* For jumbo packets > 2k but < 8k, split 50-50. */ - writel(0, &pGbl->rxq_start_addr); - writel(INTERNAL_MEM_RX_OFFSET, &pGbl->rxq_end_addr); - writel(INTERNAL_MEM_RX_OFFSET + 1, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); - } else { - /* 9216 is the only packet size greater than 8k that - * is available. The Tx buffer has to be big enough - * for one whole packet on the Tx side. We'll make - * the Tx 9408, and give the rest to Rx - */ - writel(0x0000, &pGbl->rxq_start_addr); - writel(0x01b3, &pGbl->rxq_end_addr); - writel(0x01b4, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1,&pGbl->txq_end_addr); - } - - /* Initialize the loopback register. Disable all loopbacks. */ - writel(0, &pGbl->loopback.value); - } else { - /* For PHY Line loopback, the memory is configured as if Tx - * and Rx both have all the memory. This is because the - * RxMAC will write data into the space, and the TxMAC will - * read it out. - */ - writel(0, &pGbl->rxq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr); - writel(0, &pGbl->txq_start_addr); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); - - /* Initialize the loopback register (MAC loopback). */ - writel(1, &pGbl->loopback); - } - - /* MSI Register */ - writel(0, &pGbl->msi_config.value); - - /* By default, disable the watchdog timer. It will be enabled when - * a packet is queued. - */ - writel(0, &pGbl->watchdog_timer); - - DBG_LEAVE(et131x_dbginfo); -} - -/** - * ConfigMMCRegs - Used to configure the main memory registers in the JAGCore - * @etdev: pointer to our adapter structure - */ -void ConfigMMCRegs(struct et131x_adapter *etdev) -{ - DBG_ENTER(et131x_dbginfo); - /* All we need to do is initialize the Memory Control Register */ - writel(ET_MMC_ENABLE, &etdev->regs->mmc.mmc_ctrl); - DBG_LEAVE(et131x_dbginfo); -} - -/** - * et131x_enable_interrupts - enable interrupt - * @adapter: et131x device - * - * Enable the appropriate interrupts on the ET131x according to our - * configuration - */ - -void et131x_enable_interrupts(struct et131x_adapter *adapter) -{ - u32 mask; - - /* Enable all global interrupts */ - if (adapter->FlowControl == TxOnly || adapter->FlowControl == Both) - mask = INT_MASK_ENABLE; - else - mask = INT_MASK_ENABLE_NO_FLOW; - - if (adapter->DriverNoPhyAccess) - mask |= ET_INTR_PHY; - - adapter->CachedMaskValue = mask; - writel(mask, &adapter->regs->global.int_mask); -} - -/** - * et131x_disable_interrupts - interrupt disable - * @adapter: et131x device - * - * Block all interrupts from the et131x device at the device itself - */ - -void et131x_disable_interrupts(struct et131x_adapter *adapter) -{ - /* Disable all global interrupts */ - adapter->CachedMaskValue = INT_MASK_DISABLE; - writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); -} diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index 0a3464aa380..936e5e6c8a8 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -532,6 +532,76 @@ void et131x_link_detection_handler(unsigned long data) } /** + * et131x_configure_global_regs - configure JAGCore global regs + * @etdev: pointer to our adapter structure + * + * Used to configure the global registers on the JAGCore + */ +void ConfigGlobalRegs(struct et131x_adapter *etdev) +{ + struct _GLOBAL_t __iomem *pGbl = &etdev->regs->global; + + DBG_ENTER(et131x_dbginfo); + + if (etdev->RegistryPhyLoopbk == false) { + if (etdev->RegistryJumboPacket < 2048) { + /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word + * block of RAM that the driver can split between Tx + * and Rx as it desires. Our default is to split it + * 50/50: + */ + writel(0, &pGbl->rxq_start_addr); + writel(PARM_RX_MEM_END_DEF, &pGbl->rxq_end_addr); + writel(PARM_RX_MEM_END_DEF + 1, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); + } else if (etdev->RegistryJumboPacket < 8192) { + /* For jumbo packets > 2k but < 8k, split 50-50. */ + writel(0, &pGbl->rxq_start_addr); + writel(INTERNAL_MEM_RX_OFFSET, &pGbl->rxq_end_addr); + writel(INTERNAL_MEM_RX_OFFSET + 1, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); + } else { + /* 9216 is the only packet size greater than 8k that + * is available. The Tx buffer has to be big enough + * for one whole packet on the Tx side. We'll make + * the Tx 9408, and give the rest to Rx + */ + writel(0x0000, &pGbl->rxq_start_addr); + writel(0x01b3, &pGbl->rxq_end_addr); + writel(0x01b4, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1,&pGbl->txq_end_addr); + } + + /* Initialize the loopback register. Disable all loopbacks. */ + writel(0, &pGbl->loopback.value); + } else { + /* For PHY Line loopback, the memory is configured as if Tx + * and Rx both have all the memory. This is because the + * RxMAC will write data into the space, and the TxMAC will + * read it out. + */ + writel(0, &pGbl->rxq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr); + writel(0, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); + + /* Initialize the loopback register (MAC loopback). */ + writel(1, &pGbl->loopback); + } + + /* MSI Register */ + writel(0, &pGbl->msi_config.value); + + /* By default, disable the watchdog timer. It will be enabled when + * a packet is queued. + */ + writel(0, &pGbl->watchdog_timer); + + DBG_LEAVE(et131x_dbginfo); +} + + +/** * et131x_adapter_setup - Set the adapter up as per cassini+ documentation * @adapter: pointer to our private adapter structure * @@ -547,7 +617,10 @@ int et131x_adapter_setup(struct et131x_adapter *etdev) ConfigGlobalRegs(etdev); ConfigMACRegs1(etdev); - ConfigMMCRegs(etdev); + + /* Configure the MMC registers */ + /* All we need to do is initialize the Memory Control Register */ + writel(ET_MMC_ENABLE, &etdev->regs->mmc.mmc_ctrl); ConfigRxMacRegs(etdev); ConfigTxMacRegs(etdev); @@ -645,7 +718,7 @@ void et131x_soft_reset(struct et131x_adapter *adapter) writel(0xc00f0000, &adapter->regs->mac.cfg1.value); /* Set everything to a reset value */ - writel(0x7F, &adapter->regs->global.sw_reset.value); + writel(0x7F, &adapter->regs->global.sw_reset); writel(0x000f0000, &adapter->regs->mac.cfg1.value); writel(0x00000000, &adapter->regs->mac.cfg1.value); diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c index 656df12acf7..878fd205e41 100644 --- a/drivers/staging/et131x/et131x_isr.c +++ b/drivers/staging/et131x/et131x_isr.c @@ -97,12 +97,53 @@ extern dbg_info_t *et131x_dbginfo; #endif /* CONFIG_ET131X_DEBUG */ /** + * et131x_enable_interrupts - enable interrupt + * @adapter: et131x device + * + * Enable the appropriate interrupts on the ET131x according to our + * configuration + */ + +void et131x_enable_interrupts(struct et131x_adapter *adapter) +{ + u32 mask; + + /* Enable all global interrupts */ + if (adapter->FlowControl == TxOnly || adapter->FlowControl == Both) + mask = INT_MASK_ENABLE; + else + mask = INT_MASK_ENABLE_NO_FLOW; + + if (adapter->DriverNoPhyAccess) + mask |= ET_INTR_PHY; + + adapter->CachedMaskValue = mask; + writel(mask, &adapter->regs->global.int_mask); +} + +/** + * et131x_disable_interrupts - interrupt disable + * @adapter: et131x device + * + * Block all interrupts from the et131x device at the device itself + */ + +void et131x_disable_interrupts(struct et131x_adapter *adapter) +{ + /* Disable all global interrupts */ + adapter->CachedMaskValue = INT_MASK_DISABLE; + writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); +} + + +/** * et131x_isr - The Interrupt Service Routine for the driver. * @irq: the IRQ on which the interrupt was received. * @dev_id: device-specific info (here a pointer to a net_device struct) * * Returns a value indicating if the interrupt was handled. */ + irqreturn_t et131x_isr(int irq, void *dev_id) { bool handled = true; @@ -197,7 +238,6 @@ irqreturn_t et131x_isr(int irq, void *dev_id) * execution */ schedule_work(&adapter->task); - out: return IRQ_RETVAL(handled); } @@ -476,6 +516,5 @@ void et131x_isr_handler(struct work_struct *work) DBG_VERBOSE(et131x_dbginfo, "SLV_TIMEOUT interrupt\n"); } } - et131x_enable_interrupts(etdev); } |