aboutsummaryrefslogtreecommitdiff
path: root/drivers/staging
diff options
context:
space:
mode:
authorLarry Finger <Larry.Finger@lwfinger.net>2010-02-14 22:07:57 -0600
committerGreg Kroah-Hartman <gregkh@suse.de>2010-03-03 16:42:59 -0800
commitcd18964a1d67c4989474ffca0109ef1c0f8502a3 (patch)
tree4fed6694fe9312e2a55d0241f7c65eef67566c08 /drivers/staging
parent8daba6b94dce76254b10de0a9a777f792a120322 (diff)
Staging: r8187se: Remove dead code from r8185b_init.c
Remove dead code from r8185b_init.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging')
-rw-r--r--drivers/staging/rtl8187se/r8185b_init.c632
1 files changed, 2 insertions, 630 deletions
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 19b5c9f90b5..a0ece1fd64a 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -243,82 +243,7 @@ void SetOutputEnableOfRfPins(struct net_device *dev)
write_nic_word(dev, RFPinsEnable, 0x1bff);
}
-void
-ZEBRA_RFSerialWrite(
- struct net_device *dev,
- u32 data2Write,
- u8 totalLength,
- u8 low2high
- )
-{
- ThreeWireReg twreg;
- int i;
- u16 oval,oval2,oval3;
- u32 mask;
- u16 UshortBuffer;
-
- u8 u1bTmp;
- // RTL8187S HSSI Read/Write Function
- u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
- u1bTmp |= RF_SW_CFG_SI; //reg08[1]=1 Serial Interface(SI)
- write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
- UshortBuffer = read_nic_word(dev, RFPinsOutput);
- oval = UshortBuffer & 0xfff8; // We shall clear bit0, 1, 2 first, 2005.10.28, by rcnjko.
-
- oval2 = read_nic_word(dev, RFPinsEnable);
- oval3 = read_nic_word(dev, RFPinsSelect);
-
- // <RJ_NOTE> 3-wire should be controled by HW when we finish SW 3-wire programming. 2005.08.10, by rcnjko.
- oval3 &= 0xfff8;
-
- write_nic_word(dev, RFPinsEnable, (oval2|0x0007)); // Set To Output Enable
- write_nic_word(dev, RFPinsSelect, (oval3|0x0007)); // Set To SW Switch
- udelay(10);
-
- // Add this to avoid hardware and software 3-wire conflict.
- // 2005.03.01, by rcnjko.
- twreg.longData = 0;
- twreg.struc.enableB = 1;
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval)); // Set SI_EN (RFLE)
- udelay(2);
- twreg.struc.enableB = 0;
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval)); // Clear SI_EN (RFLE)
- udelay(10);
-
- mask = (low2high)?0x01:((u32)0x01<<(totalLength-1));
-
- for(i=0; i<totalLength/2; i++)
- {
- twreg.struc.data = ((data2Write&mask)!=0) ? 1 : 0;
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval));
- twreg.struc.clk = 1;
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval));
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval));
-
- mask = (low2high)?(mask<<1):(mask>>1);
- twreg.struc.data = ((data2Write&mask)!=0) ? 1 : 0;
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval));
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval));
- twreg.struc.clk = 0;
- write_nic_word(dev, RFPinsOutput, (twreg.longData|oval));
- mask = (low2high)?(mask<<1):(mask>>1);
- }
-
- twreg.struc.enableB = 1;
- twreg.struc.clk = 0;
- twreg.struc.data = 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval);
- udelay(10);
-
- write_nic_word(dev, RFPinsOutput, oval|0x0004);
- write_nic_word(dev, RFPinsSelect, oval3|0x0000);
-
- SetOutputEnableOfRfPins(dev);
-}
-//by amy
-
-
-int
+static int
HwHSSIThreeWire(
struct net_device *dev,
u8 *pDataBuf,
@@ -456,138 +381,6 @@ HwHSSIThreeWire(
return bResult;
}
-//by amy
-
-int
-HwThreeWire(
- struct net_device *dev,
- u8 *pDataBuf,
- u8 nDataBufBitCnt,
- int bHold,
- int bWrite
- )
-{
- int bResult = 1;
- u8 TryCnt;
- u8 u1bTmp;
-
- do
- {
- // Check if WE and RE are cleared.
- for(TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)
- {
- u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
- if( (u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0 )
- {
- break;
- }
- udelay(10);
- }
- if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
- panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
-
- // Fill up data buffer for write operation.
- if(nDataBufBitCnt == 16)
- {
- write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
- }
- else if(nDataBufBitCnt == 64)
- {
- write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf));
- write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4)));
- }
- else
- {
- int idx;
- int ByteCnt = nDataBufBitCnt / 8;
-
- if ((nDataBufBitCnt % 8) != 0)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
- nDataBufBitCnt);
-
- if (nDataBufBitCnt > 64)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
- nDataBufBitCnt);
-
- for(idx = 0; idx < ByteCnt; idx++)
- {
- write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
- }
- }
-
- // Fill up length field.
- u1bTmp = (u8)(nDataBufBitCnt - 1); // Number of bits - 1.
- if(bHold)
- u1bTmp |= SW_3W_CMD0_HOLD;
- write_nic_byte(dev, SW_3W_CMD0, u1bTmp);
-
- // Set up command: WE or RE.
- if(bWrite)
- {
- write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE);
- }
- else
- {
- write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE);
- }
-
- // Check if WE and RE are cleared and DONE is set.
- for(TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)
- {
- u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
- if( (u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0 &&
- (u1bTmp & SW_3W_CMD1_DONE) != 0 )
- {
- break;
- }
- udelay(10);
- }
- if(TryCnt == TC_3W_POLL_MAX_TRY_CNT)
- {
- //RT_ASSERT(TryCnt != TC_3W_POLL_MAX_TRY_CNT,
- // ("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear or DONE is not set!!\n", u1bTmp));
- // Workaround suggested by wcchu: clear WE here. 2006.07.07, by rcnjko.
- write_nic_byte(dev, SW_3W_CMD1, 0);
- }
-
- // Read back data for read operation.
- // <RJ_TODO> I am not sure if this is correct output format of a read operation.
- if(bWrite == 0)
- {
- if(nDataBufBitCnt == 16)
- {
- *((u16 *)pDataBuf) = read_nic_word(dev, SW_3W_DB0);
- }
- else if(nDataBufBitCnt == 64)
- {
- *((u32 *)pDataBuf) = read_nic_dword(dev, SW_3W_DB0);
- *((u32 *)(pDataBuf + 4)) = read_nic_dword(dev, SW_3W_DB1);
- }
- else
- {
- int idx;
- int ByteCnt = nDataBufBitCnt / 8;
-
- if ((nDataBufBitCnt % 8) != 0)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
- nDataBufBitCnt);
-
- if (nDataBufBitCnt > 64)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
- nDataBufBitCnt);
-
- for(idx = 0; idx < ByteCnt; idx++)
- {
- *(pDataBuf+idx) = read_nic_byte(dev, (SW_3W_DB0+idx));
- }
- }
- }
-
- }while(0);
-
- return bResult;
-}
-
void
RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
@@ -602,125 +395,6 @@ RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
HwHSSIThreeWire(dev, (u8 *)(&data2Write), len, 1, 1);
}
-void
-ZEBRA_RFSerialRead(struct net_device *dev, u32 data2Write, u8 wLength,
- u32 *data2Read, u8 rLength, u8 low2high)
-{
- ThreeWireReg twreg;
- int i;
- u16 oval, oval2, oval3, tmp, wReg80;
- u32 mask;
- u8 u1bTmp;
- ThreeWireReg tdata;
- //PHAL_DATA_8187 pHalData = GetHalData8187(pAdapter);
- { // RTL8187S HSSI Read/Write Function
- u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
- u1bTmp |= RF_SW_CFG_SI; //reg08[1]=1 Serial Interface(SI)
- write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
- }
-
- wReg80 = oval = read_nic_word(dev, RFPinsOutput);
- oval2 = read_nic_word(dev, RFPinsEnable);
- oval3 = read_nic_word(dev, RFPinsSelect);
-
- write_nic_word(dev, RFPinsEnable, oval2|0xf);
- write_nic_word(dev, RFPinsSelect, oval3|0xf);
-
- *data2Read = 0;
-
- // We must clear BIT0-3 here, otherwise,
- // SW_Enalbe will be true when we first call ZEBRA_RFSerialRead() after 8187MPVC open,
- // which will cause the value read become 0. 2005.04.11, by rcnjko.
- oval &= ~0xf;
-
- // Avoid collision with hardware three-wire.
- twreg.longData = 0;
- twreg.struc.enableB = 1;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(4);
-
- twreg.longData = 0;
- twreg.struc.enableB = 0;
- twreg.struc.clk = 0;
- twreg.struc.read_write = 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(5);
-
- mask = (low2high) ? 0x01 : ((u32)0x01<<(32-1));
- for(i = 0; i < wLength/2; i++)
- {
- twreg.struc.data = ((data2Write&mask) != 0) ? 1 : 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(1);
- twreg.struc.clk = 1;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
-
- mask = (low2high) ? (mask<<1): (mask>>1);
-
- if(i == 2)
- {
- // Commented out by Jackie, 2004.08.26. <RJ_NOTE> We must comment out the following two lines for we cannot pull down VCOPDN during RF Serail Read.
- //PlatformEFIOWrite2Byte(pAdapter, RFPinsEnable, 0xe); // turn off data enable
- //PlatformEFIOWrite2Byte(pAdapter, RFPinsSelect, 0xe);
-
- twreg.struc.read_write=1;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- twreg.struc.clk = 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- break;
- }
- twreg.struc.data = ((data2Write&mask) != 0) ? 1: 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
-
- twreg.struc.clk = 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(1);
-
- mask = (low2high) ? (mask<<1) : (mask>>1);
- }
-
- twreg.struc.clk = 0;
- twreg.struc.data = 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- mask = (low2high) ? 0x01 : ((u32)0x01 << (12-1));
-
- //
- // 061016, by rcnjko:
- // We must set data pin to HW controled, otherwise RF can't driver it and
- // value RF register won't be able to read back properly.
- //
- write_nic_word(dev, RFPinsEnable, ( ((oval2|0x0E) & (~0x01))) );
-
- for(i = 0; i < rLength; i++)
- {
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(1);
- twreg.struc.clk = 1;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
- tmp = read_nic_word(dev, RFPinsInput);
- tdata.longData = tmp;
- *data2Read |= tdata.struc.clk ? mask : 0;
-
- twreg.struc.clk = 0;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
-
- mask = (low2high) ? (mask<<1) : (mask>>1);
- }
- twreg.struc.enableB = 1;
- twreg.struc.clk = 0;
- twreg.struc.data = 0;
- twreg.struc.read_write = 1;
- write_nic_word(dev, RFPinsOutput, twreg.longData|oval); udelay(2);
-
- //PlatformEFIOWrite2Byte(pAdapter, RFPinsEnable, oval2|0x8); // Set To Output Enable
- write_nic_word(dev, RFPinsEnable, oval2); // Set To Output Enable, <RJ_NOTE> We cannot enable BIT3 here, otherwise, we will failed to switch channel. 2005.04.12.
- //PlatformEFIOWrite2Byte(pAdapter, RFPinsEnable, 0x1bff);
- write_nic_word(dev, RFPinsSelect, oval3); // Set To SW Switch
- //PlatformEFIOWrite2Byte(pAdapter, RFPinsSelect, 0x0488);
- write_nic_word(dev, RFPinsOutput, 0x3a0);
- //PlatformEFIOWrite2Byte(pAdapter, RFPinsOutput, 0x0480);
-}
-
-
u32 RF_ReadReg(struct net_device *dev, u8 offset)
{
u32 data2Write;
@@ -891,15 +565,12 @@ ZEBRA_Config_85BASIC_HardCode(
// Page0 : reg0-reg15
-// RF_WriteReg(dev, 0x00, 0x003f); mdelay(1);//1
RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);// 1
RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1);
-// RF_WriteReg(dev, 0x02, 0x004c); mdelay(1);//2
RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);// 2
-// RF_WriteReg(dev, 0x03, 0x0000); mdelay(1);//3
RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);// 3
RF_WriteReg(dev, 0x04, 0x0975); mdelay(1);
@@ -928,8 +599,6 @@ ZEBRA_Config_85BASIC_HardCode(
RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1);
// Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl.
-// RF_WriteReg(dev, 0x08, 0x0597); mdelay(1);
-// RF_WriteReg(dev, 0x09, 0x050a); mdelay(1);
RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1);
@@ -945,7 +614,6 @@ ZEBRA_Config_85BASIC_HardCode(
RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
-// RF_WriteReg(dev, 0x00, 0x017f); mdelay(1);//6
RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1);// 6
RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1);
@@ -954,20 +622,14 @@ ZEBRA_Config_85BASIC_HardCode(
{
RF_WriteReg(dev, 0x01, i); mdelay(1);
RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
- //DbgPrint("RF - 0x%x = 0x%x", i, ZEBRA_RF_RX_GAIN_TABLE[i]);
}
RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /// 203, 343
- //RF_WriteReg(dev, 0x06, 0x0300); mdelay(1); // 400
RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); // 400
RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); // switch to reg16-reg30, and HSSI disable 137
mdelay(10); // Deay 10 ms. //0xfd
-// RF_WriteReg(dev, 0x0c, 0x09be); mdelay(1); // 7
- //RF_WriteReg(dev, 0x0c, 0x07be); mdelay(1);
- //mdelay(10); // Deay 10 ms. //0xfd
-
RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); // Z4 synthesizer loop filter setting, 392
mdelay(10); // Deay 10 ms. //0xfd
@@ -1013,10 +675,8 @@ ZEBRA_Config_85BASIC_HardCode(
RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
}
//by amy 080312
-// RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); //-by amy 080312
RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); // switch to reg0-reg15, and HSSI enable
-// RF_WriteReg(dev, 0x0d, 0x009f); mdelay(1); // Rx BB start calibration, 00c//-edward
RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); // Rx BB start calibration, 00c//+edward
RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); // temperature meter off
RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); // Rx mode
@@ -1065,13 +725,10 @@ ZEBRA_Config_85BASIC_HardCode(
// AGC.txt
//=============================================================================
-// PlatformIOWrite4Byte( dev, PhyAddr, 0x00001280); // Annie, 2006-05-05
write_phy_ofdm(dev, 0x00, 0x12);
- //WriteBBPortUchar(dev, 0x00001280);
for (i=0; i<128; i++)
{
- //DbgPrint("AGC - [%x+1] = 0x%x\n", i, ZEBRA_AGC[i+1]);
data = ZEBRA_AGC[i+1];
data = data << 8;
@@ -1087,7 +744,6 @@ ZEBRA_Config_85BASIC_HardCode(
}
PlatformIOWrite4Byte( dev, PhyAddr, 0x00001080); // Annie, 2006-05-05
- //WriteBBPortUchar(dev, 0x00001080);
//=============================================================================
@@ -1100,8 +756,6 @@ ZEBRA_Config_85BASIC_HardCode(
u4bRegOffset=i;
u4bRegValue=OFDM_CONFIG[i];
- //DbgPrint("OFDM - 0x%x = 0x%x\n", u4bRegOffset, u4bRegValue);
-
WriteBBPortUchar(dev,
(0x00000080 |
(u4bRegOffset & 0x7f) |
@@ -1125,9 +779,6 @@ UpdateInitialGain(
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- //unsigned char* IGTable;
- //u8 DIG_CurrentInitialGain = 4;
- //unsigned char u1Tmp;
//lzm add 080826
if(priv->eRFPowerState != eRfOn)
@@ -1205,13 +856,11 @@ InitTxPwrTracking87SE(
struct net_device *dev
)
{
- //struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
u32 u4bRfReg;
u4bRfReg = RF_ReadReg(dev, 0x02);
// Enable Thermal meter indication.
- //printk("InitTxPwrTracking87SE(): Enable thermal meter indication, Write RF[0x02] = %#x", u4bRfReg|PWR_METER_EN);
RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN); mdelay(1);
}
@@ -1231,7 +880,6 @@ PhyConfig8185(
{
if(priv->InitialGain == 0)
priv->InitialGain = 4;
- //printk("PhyConfig8185(): DIG is enabled, set default initial gain index to %d\n", priv->InitialGain);
}
//
@@ -1249,34 +897,17 @@ PhyConfig8185(
return;
}
-
-
-
void
HwConfigureRTL8185(
struct net_device *dev
)
{
//RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control.
-// u8 bUNIVERSAL_CONTROL_RL = 1;
u8 bUNIVERSAL_CONTROL_RL = 0;
-
u8 bUNIVERSAL_CONTROL_AGC = 1;
u8 bUNIVERSAL_CONTROL_ANT = 1;
u8 bAUTO_RATE_FALLBACK_CTL = 1;
u8 val8;
- //struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- //struct ieee80211_device *ieee = priv->ieee80211;
- //if(IS_WIRELESS_MODE_A(dev) || IS_WIRELESS_MODE_G(dev))
-//{by amy 080312 if((ieee->mode == IEEE_G)||(ieee->mode == IEEE_A))
-// {
-// write_nic_word(dev, BRSR, 0xffff);
-// }
-// else
-// {
-// write_nic_word(dev, BRSR, 0x000f);
-// }
-//by amy 080312}
write_nic_word(dev, BRSR, 0x0fff);
// Retry limit
val8 = read_nic_byte(dev, CW_CONF);
@@ -1327,20 +958,11 @@ HwConfigureRTL8185(
val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
// <RJ_TODO_8185B> We shall set up the ARFR according to user's setting.
- //write_nic_word(dev, ARFR, 0x0fff); // set 1M ~ 54M
-//by amy
- // Aadded by Roger, 2007.11.15.
PlatformIOWrite2Byte(dev, ARFR, 0x0fff); //set 1M ~ 54Mbps.
-//by amy
- }
- else
- {
}
write_nic_byte(dev, RATE_FALLBACK, val8);
}
-
-
static void
MacConfig_85BASIC_HardCode(
struct net_device *dev)
@@ -1368,14 +990,11 @@ MacConfig_85BASIC_HardCode(
{
u4bRegOffset |= (u4bPageIndex << 8);
}
- //DbgPrint("MAC - 0x%x = 0x%x\n", u4bRegOffset, u4bRegValue);
write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
}
//============================================================================
}
-
-
static void
MacConfig_85BASIC(
struct net_device *dev)
@@ -1398,8 +1017,6 @@ MacConfig_85BASIC(
PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
// Asked for by SD3 CM Lin, 2006.06.27, by rcnjko.
- //PlatformIOWrite4Byte(dev, RFTiming, 0x00004001);
-//by amy
// power save parameter based on "87SE power save parameters 20071127.doc", as follow.
//Enable DA10 TX power saving
@@ -1418,16 +1035,10 @@ MacConfig_85BASIC(
write_nic_word(dev, 0x378, 0x0560);
write_nic_word(dev, 0x37A, 0x0560);
write_nic_word(dev, 0x37C, 0x00EC);
-// write_nic_word(dev, 0x37E, 0x00FE);//-edward
write_nic_word(dev, 0x37E, 0x00EC);//+edward
write_nic_byte(dev, 0x24E,0x01);
-//by amy
-
}
-
-
-
u8
GetSupportedWirelessMode8185(
struct net_device *dev
@@ -1450,7 +1061,6 @@ ActUpdateChannelAccessSetting(
struct ieee80211_device *ieee = priv->ieee80211;
AC_CODING eACI;
AC_PARAM AcParam;
- //PSTA_QOS pStaQos = Adapter->MgntInfo.pStaQos;
u8 bFollowLegacySetting = 0;
u8 u1bAIFS;
@@ -1472,40 +1082,14 @@ ActUpdateChannelAccessSetting(
ChnlAccessSetting->CWmaxIndex = 7; // 2006.06.02, by rcnjko.
write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
- //Adapter->HalFunc.SetHwRegHandler( Adapter, HW_VAR_SLOT_TIME, &ChnlAccessSetting->SlotTimeTimer ); // Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29.
write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); // Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29.
u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer );
- //write_nic_byte(dev, AC_VO_PARAM, u1bAIFS);
- //write_nic_byte(dev, AC_VI_PARAM, u1bAIFS);
- //write_nic_byte(dev, AC_BE_PARAM, u1bAIFS);
- //write_nic_byte(dev, AC_BK_PARAM, u1bAIFS);
-
write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer);
write_nic_byte(dev, AckTimeOutReg, 0x5B); // <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS register, 2005.12.08.
-#ifdef TODO
- // <RJ_TODO_NOW_8185B> Update ECWmin/ECWmax, AIFS, TXOP Limit of each AC to the value defined by SPEC.
- if( pStaQos->CurrentQosMode > QOS_DISABLE )
- { // QoS mode.
- if(pStaQos->QBssWirelessMode == WirelessMode)
- {
- // Follow AC Parameters of the QBSS.
- for(eACI = 0; eACI < AC_MAX; eACI++)
- {
- Adapter->HalFunc.SetHwRegHandler(Adapter, HW_VAR_AC_PARAM, (pu1Byte)(&(pStaQos->WMMParamEle.AcParam[eACI])) );
- }
- }
- else
- {
- // Follow Default WMM AC Parameters.
- bFollowLegacySetting = 1;
- }
- }
- else
-#endif
{ // Legacy 802.11.
bFollowLegacySetting = 1;
@@ -1528,14 +1112,12 @@ ActUpdateChannelAccessSetting(
AcParam.f.TXOPLimit = 0;
//lzm reserved 080826
-#if 1
// For turbo mode setting. port from 87B by Isaiah 2008-08-01
if( ieee->current_network.Turbo_Enable == 1 )
AcParam.f.TXOPLimit = 0x01FF;
// For 87SE with Intel 4965 Ad-Hoc mode have poor throughput (19MB)
if (ieee->iw_mode == IW_MODE_ADHOC)
AcParam.f.TXOPLimit = 0x0020;
-#endif
for(eACI = 0; eACI < AC_MAX; eACI++)
{
@@ -1579,18 +1161,13 @@ ActUpdateChannelAccessSetting(
// Cehck ACM bit.
// If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
- //write_nic_byte(dev, ACM_CONTROL, pAcParam->f.AciAifsn);
{
PACI_AIFSN pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn);
AC_CODING eACI = pAciAifsn->f.ACI;
//modified Joseph
//for 8187B AsynIORead issue
-#ifdef TODO
- u8 AcmCtrl = pHalData->AcmControl;
-#else
u8 AcmCtrl = 0;
-#endif
if( pAciAifsn->f.ACM )
{ // ACM bit is 1.
switch(eACI)
@@ -1632,19 +1209,10 @@ ActUpdateChannelAccessSetting(
break;
}
}
-
- //printk(KERN_WARNING "SetHwReg8185(): [HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl);
-
-#ifdef TO_DO
- pHalData->AcmControl = AcmCtrl;
-#endif
- //write_nic_byte(dev, ACM_CONTROL, AcmCtrl);
write_nic_byte(dev, ACM_CONTROL, 0);
}
}
}
-
-
}
}
@@ -1656,7 +1224,6 @@ ActSetWirelessMode8185(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
- //PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
if( (btWirelessMode & btSupportedWirelessMode) == 0 )
@@ -1689,7 +1256,6 @@ ActSetWirelessMode8185(
}
}
-
/* 2. Swtich band: RF or BB specific actions,
* for example, refresh tables in omc8255, or change initial gain if necessary.
* Nothing to do for Zebra to switch band.
@@ -1706,7 +1272,6 @@ ActSetWirelessMode8185(
else if( ieee->mode == WIRELESS_MODE_G ){
DMESG("WIRELESS_MODE_G\n");
}
-
ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
}
@@ -1724,11 +1289,7 @@ DrvIFIndicateDisassociation(
u16 reason
)
{
- //printk("==> DrvIFIndicateDisassociation()\n");
-
// nothing is needed after disassociation request.
-
- //printk("<== DrvIFIndicateDisassociation()\n");
}
void
MgntDisconnectIBSS(
@@ -1738,11 +1299,7 @@ MgntDisconnectIBSS(
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
u8 i;
- //printk("XXXXXXXXXX MgntDisconnect IBSS\n");
-
DrvIFIndicateDisassociation(dev, unspec_reason);
-
-// PlatformZeroMemory( pMgntInfo->Bssid, 6 );
for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i] = 0x55;
priv->ieee80211->state = IEEE80211_NOLINK;
@@ -1754,16 +1311,10 @@ MgntDisconnectIBSS(
// Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
// Disable Beacon Queue Own bit, suggested by jong
-// Adapter->HalFunc.SetTxDescOWNHandler(Adapter, BEACON_QUEUE, 0, 0);
ieee80211_stop_send_beacons(priv->ieee80211);
priv->ieee80211->link_change(dev);
notify_wx_assoc_event(priv->ieee80211);
-
- // Stop SW Beacon.Use hw beacon so do not need to do so.by amy
-
-// MgntIndicateMediaStatus( Adapter, RT_MEDIA_DISCONNECT, GENERAL_INDICATE );
-
}
void
MlmeDisassociateRequest(
@@ -1783,14 +1334,8 @@ MlmeDisassociateRequest(
DrvIFIndicateDisassociation(dev, unspec_reason);
- // pMgntInfo->AsocTimestamp = 0;
for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i] = 0x22;
-// pMgntInfo->mBrates.Length = 0;
-// Adapter->HalFunc.SetHwRegHandler( Adapter, HW_VAR_BASIC_RATE, (pu1Byte)(&pMgntInfo->mBrates) );
-
ieee80211_disassociate(priv->ieee80211);
-
-
}
}
@@ -1808,23 +1353,12 @@ MgntDisconnectAP(
// I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
//
// //2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success
-// SecClearAllKeys(Adapter);
// In WPA WPA2 need to Clear all key ... because new key will set after new handshaking.
-#ifdef TODO
- if( pMgntInfo->SecurityInfo.AuthMode > RT_802_11AuthModeAutoSwitch ||
- (pMgntInfo->bAPSuportCCKM && pMgntInfo->bCCX8021xenable) ) // In CCKM mode will Clear key
- {
- SecClearAllKeys(Adapter);
- RT_TRACE(COMP_SEC, DBG_LOUD,("======>CCKM clear key..."))
- }
-#endif
// 2004.10.11, by rcnjko.
- //MlmeDisassociateRequest( Adapter, pMgntInfo->Bssid, disas_lv_ss );
MlmeDisassociateRequest( dev, priv->ieee80211->current_network.bssid, asRsn );
priv->ieee80211->state = IEEE80211_NOLINK;
-// pMgntInfo->AsocTimestamp = 0;
}
bool
MgntDisconnect(
@@ -1836,20 +1370,7 @@ MgntDisconnect(
//
// Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
//
-#ifdef TODO
- if(pMgntInfo->mPss != eAwake)
- {
- //
- // Using AwkaeTimer to prevent mismatch ps state.
- // In the timer the state will be changed according to the RF is being awoke or not. By Bruce, 2007-10-31.
- //
- // PlatformScheduleWorkItem( &(pMgntInfo->AwakeWorkItem) );
- PlatformSetTimer( Adapter, &(pMgntInfo->AwakeTimer), 0 );
- }
-#endif
- // Indication of disassociation event.
- //DrvIFIndicateDisassociation(Adapter, asRsn);
if(IS_DOT11D_ENABLE(priv->ieee80211))
Dot11d_Reset(priv->ieee80211);
// In adhoc mode, update beacon frame.
@@ -1857,8 +1378,6 @@ MgntDisconnect(
{
if( priv->ieee80211->iw_mode == IW_MODE_ADHOC )
{
-// RT_TRACE(COMP_MLME, DBG_LOUD, ("MgntDisconnect() ===> MgntDisconnectIBSS\n"));
- //printk("MgntDisconnect() ===> MgntDisconnectIBSS\n");
MgntDisconnectIBSS(dev);
}
if( priv->ieee80211->iw_mode == IW_MODE_INFRA )
@@ -1868,17 +1387,10 @@ MgntDisconnect(
// e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
// used to handle disassociation related things to AP, e.g. send Disassoc
// frame to AP. 2005.01.27, by rcnjko.
-// SecClearAllKeys(Adapter);
-
-// RT_TRACE(COMP_MLME, DBG_LOUD, ("MgntDisconnect() ===> MgntDisconnectAP\n"));
- //printk("MgntDisconnect() ===> MgntDisconnectAP\n");
MgntDisconnectAP(dev, asRsn);
}
-
// Inidicate Disconnect, 2005.02.23, by rcnjko.
-// MgntIndicateMediaStatus( Adapter, RT_MEDIA_DISCONNECT, GENERAL_INDICATE);
}
-
return true;
}
//
@@ -1898,10 +1410,8 @@ SetRFPowerState(
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
bool bResult = false;
-// printk("---------> SetRFPowerState(): eRFPowerState(%d)\n", eRFPowerState);
if(eRFPowerState == priv->eRFPowerState)
{
-// printk("<--------- SetRFPowerState(): discard the request for eRFPowerState(%d) is the same.\n", eRFPowerState);
return bResult;
}
@@ -1935,33 +1445,25 @@ MgntActSet_RF_State(
RT_RF_POWER_STATE rtState;
u16 RFWaitCounter = 0;
unsigned long flag;
-// printk("===>MgntActSet_RF_State(): StateToSet(%d), ChangeSource(0x%x)\n",StateToSet, ChangeSource);
//
// Prevent the race condition of RF state change. By Bruce, 2007-11-28.
// Only one thread can change the RF state at one time, and others should wait to be executed.
//
-#if 1
while(true)
{
-// down(&priv->rf_state);
spin_lock_irqsave(&priv->rf_ps_lock,flag);
if(priv->RFChangeInProgress)
{
-// printk("====================>haha111111111\n");
-// up(&priv->rf_state);
-// RT_TRACE(COMP_RF, DBG_LOUD, ("MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(%d).\n", StateToSet));
spin_unlock_irqrestore(&priv->rf_ps_lock,flag);
// Set RF after the previous action is done.
while(priv->RFChangeInProgress)
{
RFWaitCounter ++;
-// RT_TRACE(COMP_RF, DBG_LOUD, ("MgntActSet_RF_State(): Wait 1 ms (%d times)...\n", RFWaitCounter));
udelay(1000); // 1 ms
// Wait too long, return FALSE to avoid to be stuck here.
if(RFWaitCounter > 1000) // 1sec
{
-// RT_ASSERT(FALSE, ("MgntActSet_RF_State(): Wait too logn to set RF\n"));
printk("MgntActSet_RF_State(): Wait too long to set RF\n");
// TODO: Reset RF state?
return false;
@@ -1970,17 +1472,13 @@ MgntActSet_RF_State(
}
else
{
-// printk("========================>haha2\n");
priv->RFChangeInProgress = true;
-// up(&priv->rf_state);
spin_unlock_irqrestore(&priv->rf_ps_lock,flag);
break;
}
}
-#endif
rtState = priv->eRFPowerState;
-
switch(StateToSet)
{
case eRfOn:
@@ -2001,7 +1499,6 @@ MgntActSet_RF_State(
}
}
else
-// RT_TRACE(COMP_RF, DBG_LOUD, ("MgntActSet_RF_State - eRfon reject pMgntInfo->RfOffReason= 0x%x, ChangeSource=0x%X\n", pMgntInfo->RfOffReason, ChangeSource));
;
break;
@@ -2018,38 +1515,26 @@ MgntActSet_RF_State(
//
// Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
// because we do NOT need to set ssid to dummy ones.
- // Revised by Roger, 2007.12.04.
//
MgntDisconnect( dev, disas_lv_ss );
// Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI.
- // 2007.05.28, by shien chang.
-// PlatformZeroMemory( pMgntInfo->bssDesc, sizeof(RT_WLAN_BSS)*MAX_BSS_DESC );
-// pMgntInfo->NumBssDesc = 0;
-// PlatformZeroMemory( pMgntInfo->bssDesc4Query, sizeof(RT_WLAN_BSS)*MAX_BSS_DESC );
-// pMgntInfo->NumBssDesc4Query = 0;
}
-
-
priv->RfOffReason |= ChangeSource;
bActionAllowed = true;
break;
-
case eRfSleep:
priv->RfOffReason |= ChangeSource;
bActionAllowed = true;
break;
-
default:
break;
}
if(bActionAllowed)
{
-// RT_TRACE(COMP_RF, DBG_LOUD, ("MgntActSet_RF_State(): Action is allowed.... StateToSet(%d), RfOffReason(%#X)\n", StateToSet, pMgntInfo->RfOffReason));
// Config HW to the specified mode.
-// printk("MgntActSet_RF_State(): Action is allowed.... StateToSet(%d), RfOffReason(%#X)\n", StateToSet, priv->RfOffReason);
SetRFPowerState(dev, StateToSet);
// Turn on RF.
@@ -2059,7 +1544,6 @@ MgntActSet_RF_State(
if(bConnectBySSID)
{
// by amy not supported
-// MgntActSet_802_11_SSID(Adapter, Adapter->MgntInfo.Ssid.Octet, Adapter->MgntInfo.Ssid.Length, TRUE );
}
}
// Turn off RF.
@@ -2068,18 +1552,11 @@ MgntActSet_RF_State(
HalDisableRx8185Dummy(dev);
}
}
- else
- {
- // printk("MgntActSet_RF_State(): Action is rejected.... StateToSet(%d), ChangeSource(%#X), RfOffReason(%#X)\n", StateToSet, ChangeSource, priv->RfOffReason);
- }
// Release RF spinlock
-// down(&priv->rf_state);
spin_lock_irqsave(&priv->rf_ps_lock,flag);
priv->RFChangeInProgress = false;
-// up(&priv->rf_state);
spin_unlock_irqrestore(&priv->rf_ps_lock,flag);
-// printk("<===MgntActSet_RF_State()\n");
return bActionAllowed;
}
void
@@ -2088,15 +1565,12 @@ InactivePowerSave(
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- //u8 index = 0;
-
//
// This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
// is really scheduled.
// The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
// previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
// blocks the IPS procedure of switching RF.
- // By Bruce, 2007-12-25.
//
priv->bSwRfProcessing = true;
@@ -2112,7 +1586,6 @@ InactivePowerSave(
//
// Description:
// Enter the inactive power save mode. RF will be off
-// 2007.08.17, by shien chang.
//
void
IPSEnter(
@@ -2121,13 +1594,11 @@ IPSEnter(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
RT_RF_POWER_STATE rtState;
- //printk("==============================>enter IPS\n");
if (priv->bInactivePs)
{
rtState = priv->eRFPowerState;
//
- // Added by Bruce, 2007-12-25.
// Do not enter IPS in the following conditions:
// (1) RF is already OFF or Sleep
// (2) bSwRfProcessing (indicates the IPS is still under going)
@@ -2138,12 +1609,10 @@ IPSEnter(
if (rtState == eRfOn && !priv->bSwRfProcessing
&& (priv->ieee80211->state != IEEE80211_LINKED ))
{
- // printk("IPSEnter(): Turn off RF.\n");
priv->eInactivePowerState = eRfOff;
InactivePowerSave(dev);
}
}
-// printk("priv->eRFPowerState is %d\n",priv->eRFPowerState);
}
void
IPSLeave(
@@ -2152,20 +1621,17 @@ IPSLeave(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
RT_RF_POWER_STATE rtState;
- //printk("===================================>leave IPS\n");
if (priv->bInactivePs)
{
rtState = priv->eRFPowerState;
if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS)
{
-// printk("IPSLeave(): Turn on RF.\n");
priv->eInactivePowerState = eRfOn;
InactivePowerSave(dev);
}
}
-// printk("priv->eRFPowerState is %d\n",priv->eRFPowerState);
}
-//by amy for power save
+
void rtl8185b_adapter_start(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
@@ -2174,75 +1640,45 @@ void rtl8185b_adapter_start(struct net_device *dev)
u8 SupportedWirelessMode;
u8 InitWirelessMode;
u8 bInvalidWirelessMode = 0;
- //int i;
u8 tmpu8;
- //u8 u1tmp,u2tmp;
u8 btCR9346;
u8 TmpU1b;
u8 btPSR;
- //rtl8180_rtx_disable(dev);
-//{by amy 080312
write_nic_byte(dev,0x24e, (BIT5|BIT6|BIT0));
-//by amy 080312}
rtl8180_reset(dev);
priv->dma_poll_mask = 0;
priv->dma_poll_stop_mask = 0;
- //rtl8180_beacon_tx_disable(dev);
-
HwConfigureRTL8185(dev);
-
write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]);
write_nic_word(dev, MAC4, ((u32*)dev->dev_addr)[1] & 0xffff );
-
write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); // default network type to 'No Link'
-
- //write_nic_byte(dev, BRSR, 0x0); // Set BRSR= 1M
-
write_nic_word(dev, BcnItv, 100);
write_nic_word(dev, AtimWnd, 2);
-
- //PlatformEFIOWrite2Byte(dev, FEMR, 0xFFFF);
PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
-
write_nic_byte(dev, WPA_CONFIG, 0);
-
MacConfig_85BASIC(dev);
-
// Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko.
// BT_DEMO_BOARD type
PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
-//by amy
-//#ifdef CONFIG_RTL818X_S
- // for jong required
-// PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x9a56);
-//#endif
-//by amy
- //BT_QA_BOARD
- //PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x9a56);
//-----------------------------------------------------------------------------
// Set up PHY related.
//-----------------------------------------------------------------------------
// Enable Config3.PARAM_En to revise AnaaParm.
write_nic_byte(dev, CR9346, 0xc0); // enable config register write
-//by amy
tmpu8 = read_nic_byte(dev, CONFIG3);
write_nic_byte(dev, CONFIG3, (tmpu8 |CONFIG3_PARM_En) );
-//by amy
// Turn on Analog power.
// Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko.
write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
-//by amy
write_nic_word(dev, ANAPARAM3, 0x0010);
-//by amy
write_nic_byte(dev, CONFIG3, tmpu8);
write_nic_byte(dev, CR9346, 0x00);
-//{by amy 080312 for led
// enable EEM0 and EEM1 in 9346CR
btCR9346 = read_nic_byte(dev, CR9346);
write_nic_byte(dev, CR9346, (btCR9346|0xC0) );
@@ -2260,7 +1696,6 @@ void rtl8185b_adapter_start(struct net_device *dev)
// B-cut RF Radio on/off 5e[3]=0
btPSR = read_nic_byte(dev, PSR);
write_nic_byte(dev, PSR, (btPSR | BIT3));
-//by amy 080312 for led}
// setup initial timing for RFE.
write_nic_word(dev, RFPinsOutput, 0x0480);
SetOutputEnableOfRfPins(dev);
@@ -2323,55 +1758,19 @@ void rtl8185b_adapter_start(struct net_device *dev)
InitWirelessMode = ieee->mode;
}
//by amy for power save
-// printk("initialize ENABLE_IPS\n");
priv->eRFPowerState = eRfOff;
priv->RfOffReason = 0;
{
- // u32 tmp2;
- // u32 tmp = jiffies;
MgntActSet_RF_State(dev, eRfOn, 0);
- // tmp2 = jiffies;
- // printk("rf on cost jiffies:%lx\n", (tmp2-tmp)*1000/HZ);
}
-// DrvIFIndicateCurrentPhyStatus(priv);
//
// If inactive power mode is enabled, disable rf while in disconnected state.
- // 2007.07.16, by shien chang.
//
if (priv->bInactivePs)
{
- // u32 tmp2;
- // u32 tmp = jiffies;
MgntActSet_RF_State(dev,eRfOff, RF_CHANGE_BY_IPS);
- // tmp2 = jiffies;
- // printk("rf off cost jiffies:%lx\n", (tmp2-tmp)*1000/HZ);
-
}
-// IPSEnter(dev);
//by amy for power save
-#ifdef TODO
- // Turn off RF if necessary. 2005.08.23, by rcnjko.
- // We shall turn off RF after setting CMDR, otherwise,
- // RF will be turnned on after we enable MAC Tx/Rx.
- if(Adapter->MgntInfo.RegRfOff == TRUE)
- {
- SetRFPowerState8185(Adapter, RF_OFF);
- }
- else
- {
- SetRFPowerState8185(Adapter, RF_ON);
- }
-#endif
-
-/* //these is equal with above TODO.
- write_nic_byte(dev, CR9346, 0xc0); // enable config register write
- write_nic_byte(dev, CONFIG3, read_nic_byte(dev, CONFIG3) | CONFIG3_PARM_En);
- RF_WriteReg(dev, 0x4, 0x9FF);
- write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
- write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
- write_nic_byte(dev, CONFIG3, (read_nic_byte(dev, CONFIG3)&(~CONFIG3_PARM_En)));
- write_nic_byte(dev, CR9346, 0x00);
-*/
ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
@@ -2380,14 +1779,11 @@ void rtl8185b_adapter_start(struct net_device *dev)
rtl8185b_irq_enable(dev);
netif_start_queue(dev);
-
}
-
void rtl8185b_rx_enable(struct net_device *dev)
{
u8 cmd;
- //u32 rxconf;
/* for now we accept data, management & ctl frame*/
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -2399,11 +1795,6 @@ void rtl8185b_rx_enable(struct net_device *dev)
priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
}
- /*if(priv->ieee80211->iw_mode == IW_MODE_MASTER){
- rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
- rxconf = rxconf | (1<<RX_CHECK_BSSID_SHIFT);
- }*/
-
if(priv->ieee80211->iw_mode == IW_MODE_MONITOR){
priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF | RCR_APWRMGT | RCR_AICV;
}
@@ -2415,9 +1806,6 @@ void rtl8185b_rx_enable(struct net_device *dev)
fix_rx_fifo(dev);
-#ifdef DEBUG_RX
- DMESG("rxconf: %x %x",priv->ReceiveConfig ,read_nic_dword(dev,RCR));
-#endif
cmd=read_nic_byte(dev,CMD);
write_nic_byte(dev,CMD,cmd | (1<<CMD_RX_ENABLE_SHIFT));
@@ -2426,9 +1814,7 @@ void rtl8185b_rx_enable(struct net_device *dev)
void rtl8185b_tx_enable(struct net_device *dev)
{
u8 cmd;
- //u8 tx_agc_ctl;
u8 byte;
- //u32 txconf;
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
write_nic_dword(dev, TCR, priv->TransmitConfig);
@@ -2438,21 +1824,7 @@ void rtl8185b_tx_enable(struct net_device *dev)
fix_tx_fifo(dev);
-#ifdef DEBUG_TX
- DMESG("txconf: %x %x",priv->TransmitConfig,read_nic_dword(dev,TCR));
-#endif
-
cmd=read_nic_byte(dev,CMD);
write_nic_byte(dev,CMD,cmd | (1<<CMD_TX_ENABLE_SHIFT));
-
- //write_nic_dword(dev,TX_CONF,txconf);
-
-
-/*
- rtl8180_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev, TX_DMA_POLLING, priv->dma_poll_mask);
- rtl8180_set_mode(dev,EPROM_CMD_NORMAL);
- */
}
-