diff options
author | David Brownell <david-b@pacbell.net> | 2005-09-22 22:38:16 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2005-10-28 16:47:40 -0700 |
commit | 5f827ea3c3820cd8e0a1a35e4d275c8b78ee94e1 (patch) | |
tree | 7bd8a0f12f83c219cab6da7e30e8d0e1d94df57d /drivers/usb/core | |
parent | f3f3253d644d36a2ea5464005a9c2cf28804d200 (diff) |
[PATCH] usbcore PCI glue updates for PM
This updates the PCI glue to address the new and simplified usbcore suspend
semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because
hcd->hub_suspend() will always be called.
- Removes now-unneeded recursion support
- Go back to ignoring faults reported by the wakeup calls; we expect them
to fail sometimes, and that's just fine.
The PCI HCDs will need simple changes to catch up to this, like being able
to ignore the setting of CONFIG_USB_SUSPEND.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------
drivers/usb/core/hcd.h | 6 +-
2 files changed, 53 insertions(+), 59 deletions(-)
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/hcd-pci.c | 106 | ||||
-rw-r--r-- | drivers/usb/core/hcd.h | 6 |
2 files changed, 53 insertions, 59 deletions
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 6385d1a99b6..84d9e69329b 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -30,6 +30,8 @@ #include <asm/io.h> #include <asm/irq.h> #include <linux/usb.h> + +#include "usb.h" #include "hcd.h" @@ -197,6 +199,26 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) hcd = pci_get_drvdata(dev); + /* Root hub suspend should have stopped all downstream traffic, + * and all bus master traffic. And done so for both the interface + * and the stub usb_device (which we check here). But maybe it + * didn't; writing sysfs power/state files ignores such rules... + * + * We must ignore the FREEZE vs SUSPEND distinction here, because + * otherwise the swsusp will save (and restore) garbage state. + */ + if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON) + return -EBUSY; + + if (hcd->driver->suspend) { + retval = hcd->driver->suspend(hcd, message); + if (retval) { + dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n", + retval); + goto done; + } + } + /* FIXME until the generic PM interfaces change a lot more, this * can't use PCI D1 and D2 states. For example, the confusion * between messages and states will need to vanish, and messages @@ -215,31 +237,13 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) */ has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - switch (hcd->state) { - - /* entry if root hub wasn't yet suspended ... from sysfs, - * without autosuspend, or if USB_SUSPEND isn't configured. + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. */ - case HC_STATE_RUNNING: - hcd->state = HC_STATE_QUIESCING; - retval = hcd->driver->suspend (hcd, message); - if (retval) { - dev_dbg (hcd->self.controller, - "suspend fail, retval %d\n", - retval); - break; - } - hcd->state = HC_STATE_SUSPENDED; - /* FALLTHROUGH */ + if (hcd->state == HC_STATE_SUSPENDED) { - /* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the - * controller and/or root hub will already have been suspended, - * but it won't be ready for a PCI resume call. - * - * FIXME only CONFIG_USB_SUSPEND guarantees hub_suspend() will - * have been called, otherwise root hub timers still run ... - */ - case HC_STATE_SUSPENDED: /* no DMA or IRQs except when HC is active */ if (dev->current_state == PCI_D0) { pci_save_state (dev); @@ -248,7 +252,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) if (!has_pci_pm) { dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n"); - break; + goto done; } /* NOTE: dev->current_state becomes nonzero only here, and @@ -259,28 +263,29 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) retval = pci_set_power_state (dev, PCI_D3hot); if (retval == 0) { dev_dbg (hcd->self.controller, "--> PCI D3\n"); - retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup); - if (retval) - break; - retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup); - } else if (retval < 0) { + + /* Ignore these return values. We rely on pci code to + * reject requests the hardware can't implement, rather + * than coding the same thing. + */ + (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup); + (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup); + } else { dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n", retval); (void) usb_hcd_pci_resume (dev); - break; } - break; - default: + + } else { dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n", hcd->state); WARN_ON(1); retval = -EINVAL; - break; } - /* update power_state **ONLY** to make sysfs happier */ +done: if (retval == 0) - dev->dev.power.power_state = message; + dev->dev.power.power_state = PMSG_SUSPEND; return retval; } EXPORT_SYMBOL (usb_hcd_pci_suspend); @@ -336,20 +341,9 @@ int usb_hcd_pci_resume (struct pci_dev *dev) dev->current_state); } #endif - retval = pci_enable_wake (dev, dev->current_state, 0); - if (retval) { - dev_err(hcd->self.controller, - "can't enable_wake to %d, %d!\n", - dev->current_state, retval); - return retval; - } - retval = pci_enable_wake (dev, PCI_D3cold, 0); - if (retval) { - dev_err(hcd->self.controller, - "can't enable_wake to %d, %d!\n", - PCI_D3cold, retval); - return retval; - } + /* yes, ignore these results too... */ + (void) pci_enable_wake (dev, dev->current_state, 0); + (void) pci_enable_wake (dev, PCI_D3cold, 0); } else { /* Same basic cases: clean (powered/not), dirty */ dev_dbg(hcd->self.controller, "PCI legacy resume\n"); @@ -371,17 +365,17 @@ int usb_hcd_pci_resume (struct pci_dev *dev) dev->dev.power.power_state = PMSG_ON; - hcd->state = HC_STATE_RESUMING; hcd->saw_irq = 0; - retval = hcd->driver->resume (hcd); - if (!HC_IS_RUNNING (hcd->state)) { - dev_dbg (hcd->self.controller, - "resume fail, retval %d\n", retval); - usb_hc_died (hcd); + if (hcd->driver->resume) { + retval = hcd->driver->resume(hcd); + if (retval) { + dev_err (hcd->self.controller, + "PCI post-resume error %d!\n", retval); + usb_hc_died (hcd); + } } - retval = pci_enable_device(dev); return retval; } EXPORT_SYMBOL (usb_hcd_pci_resume); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index eb21f13c5c7..74757fc1a99 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -182,12 +182,12 @@ struct hc_driver { int (*start) (struct usb_hcd *hcd); /* NOTE: these suspend/resume calls relate to the HC as - * a whole, not just the root hub; they're for bus glue. + * a whole, not just the root hub; they're for PCI bus glue. */ - /* called after all devices were suspended */ + /* called after suspending the hub, before entering D3 etc */ int (*suspend) (struct usb_hcd *hcd, pm_message_t message); - /* called before any devices get resumed */ + /* called after entering D0 (etc), before resuming the hub */ int (*resume) (struct usb_hcd *hcd); /* cleanly make HCD stop writing memory and doing I/O */ |