aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/ether.c
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2008-06-19 18:20:11 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2008-07-21 15:16:17 -0700
commit0391c828ce75cc71ae301946699a6f2d515fd99d (patch)
treec972cb6ce5a75221e046cfbd6b98a2d8abf5d8d1 /drivers/usb/gadget/ether.c
parent19e2068015d4a66f62a0a19be2130d2948ba8024 (diff)
usb ethernet gadget: use composite gadget framework
Building on the previous patches which took code from this driver and pakaged it in more-reusable network "function" components, this patch gets rid of the original code and uses those components instead. As seen with the other gadget driver conversions, the resulting code is much easier to understand and (presumably) work with. In this case that's especially true, since the Ethernet gadget had grown to handle three (!) different Ethernet-over-USB protocols. This modularization should make it much easier to add a fourth option for the newish CDC "Ethernet Emulation Model" (or EEM). Lightly tested, primarily at full speed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/gadget/ether.c')
-rw-r--r--drivers/usb/gadget/ether.c2629
1 files changed, 173 insertions, 2456 deletions
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index dee1f081165..d7aaaa29b1e 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1,8 +1,9 @@
/*
* ether.c -- Ethernet gadget driver, with CDC and non-CDC options
*
- * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2003-2005,2008 David Brownell
* Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,18 +24,9 @@
#include <linux/kernel.h>
#include <linux/utsname.h>
-#include <linux/device.h>
-#include <linux/ctype.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/cdc.h>
-#include <linux/usb/gadget.h>
+#include "u_ether.h"
-#include "gadget_chips.h"
-
-/*-------------------------------------------------------------------------*/
/*
* Ethernet gadget driver -- with CDC and non-CDC options
@@ -46,7 +38,11 @@
* this USB-IF standard as its open-systems interoperability solution;
* most host side USB stacks (except from Microsoft) support it.
*
- * There's some hardware that can't talk CDC. We make that hardware
+ * This is sometimes called "CDC ECM" (Ethernet Control Model) to support
+ * TLA-soup. "CDC ACM" (Abstract Control Model) is for modems, and a new
+ * "CDC EEM" (Ethernet Emulation Model) is starting to spread.
+ *
+ * There's some hardware that can't talk CDC ECM. We make that hardware
* implement a "minimalist" vendor-agnostic CDC core: same framing, but
* link-level setup only requires activating the configuration. Only the
* endpoint descriptors, and product/vendor IDs, are relevant; no control
@@ -64,70 +60,40 @@
* A third option is also in use. Rather than CDC Ethernet, or something
* simpler, Microsoft pushes their own approach: RNDIS. The published
* RNDIS specs are ambiguous and appear to be incomplete, and are also
- * needlessly complex.
+ * needlessly complex. They borrow more from CDC ACM than CDC ECM.
*/
#define DRIVER_DESC "Ethernet Gadget"
-#define DRIVER_VERSION "May Day 2005"
-
-static const char shortname [] = "ether";
-static const char driver_desc [] = DRIVER_DESC;
-
-#define RX_EXTRA 20 /* guard against rx overflows */
-
-#include "rndis.h"
+#define DRIVER_VERSION "Memorial Day 2008"
-#ifndef CONFIG_USB_ETH_RNDIS
-#define rndis_uninit(x) do{}while(0)
-#define rndis_deregister(c) do{}while(0)
-#define rndis_exit() do{}while(0)
+#ifdef CONFIG_USB_ETH_RNDIS
+#define PREFIX "RNDIS/"
+#else
+#define PREFIX ""
#endif
-/* CDC and RNDIS support the same host-chosen outgoing packet filters. */
-#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
- |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
- |USB_CDC_PACKET_TYPE_PROMISCUOUS \
- |USB_CDC_PACKET_TYPE_DIRECTED)
-
-
-/*-------------------------------------------------------------------------*/
-
-struct eth_dev {
- spinlock_t lock;
- struct usb_gadget *gadget;
- struct usb_request *req; /* for control responses */
- struct usb_request *stat_req; /* for cdc & rndis status */
-
- u8 config;
- struct usb_ep *in_ep, *out_ep, *status_ep;
- const struct usb_endpoint_descriptor
- *in, *out, *status;
-
- spinlock_t req_lock;
- struct list_head tx_reqs, rx_reqs;
-
- struct net_device *net;
- struct net_device_stats stats;
- atomic_t tx_qlen;
-
- struct work_struct work;
- unsigned zlp:1;
- unsigned cdc:1;
- unsigned rndis:1;
- unsigned suspended:1;
- u16 cdc_filter;
- unsigned long todo;
-#define WORK_RX_MEMORY 0
- int rndis_config;
- u8 host_mac [ETH_ALEN];
-};
-
-/* This version autoconfigures as much as possible at run-time.
+/*
+ * This driver aims for interoperability by using CDC ECM unless
+ *
+ * can_support_ecm()
+ *
+ * returns false, in which case it supports the CDC Subset. By default,
+ * that returns true; most hardware has no problems with CDC ECM, that's
+ * a good default. Previous versions of this driver had no default; this
+ * version changes that, removing overhead for new controller support.
*
- * It also ASSUMES a self-powered device, without remote wakeup,
- * although remote wakeup support would make sense.
+ * IF YOUR HARDWARE CAN'T SUPPORT CDC ECM, UPDATE THAT ROUTINE!
*/
+static inline bool has_rndis(void)
+{
+#ifdef CONFIG_USB_ETH_RNDIS
+ return true;
+#else
+ return false;
+#endif
+}
+
/*-------------------------------------------------------------------------*/
/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
@@ -137,8 +103,8 @@ struct eth_dev {
/* Thanks to NetChip Technologies for donating this product ID.
* It's for devices with only CDC Ethernet configurations.
*/
-#define CDC_VENDOR_NUM 0x0525 /* NetChip */
-#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
+#define CDC_VENDOR_NUM 0x0525 /* NetChip */
+#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
/* For hardware that can't talk CDC, we use the same vendor ID that
* ARM Linux has used for ethernet-over-usb, both with sa1100 and
@@ -162,274 +128,9 @@ struct eth_dev {
#define RNDIS_VENDOR_NUM 0x0525 /* NetChip */
#define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */
-
-/* Some systems will want different product identifers published in the
- * device descriptor, either numbers or strings or both. These string
- * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
- */
-
-static ushort idVendor;
-module_param(idVendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-
-static ushort idProduct;
-module_param(idProduct, ushort, S_IRUGO);
-MODULE_PARM_DESC(idProduct, "USB Product ID");
-
-static ushort bcdDevice;
-module_param(bcdDevice, ushort, S_IRUGO);
-MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-
-static char *iManufacturer;
-module_param(iManufacturer, charp, S_IRUGO);
-MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-
-static char *iProduct;
-module_param(iProduct, charp, S_IRUGO);
-MODULE_PARM_DESC(iProduct, "USB Product string");
-
-static char *iSerialNumber;
-module_param(iSerialNumber, charp, S_IRUGO);
-MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
-
-/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
-static char *dev_addr;
-module_param(dev_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
-
-/* this address is invisible to ifconfig */
-static char *host_addr;
-module_param(host_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Include CDC support if we could run on CDC-capable hardware. */
-
-#ifdef CONFIG_USB_GADGET_NET2280
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_DUMMY_HCD
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_GOKU
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_LH7A40X
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_MQ11XX
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_OMAP
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_N9604
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_S3C2410
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_AT91
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_MUSBHSFC
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_FSL_USB2
-#define DEV_CONFIG_CDC
-#endif
-
-/* For CDC-incapable hardware, choose the simple cdc subset.
- * Anything that talks bulk (without notable bugs) can do this.
- */
-#ifdef CONFIG_USB_GADGET_PXA25X
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_SUPERH
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_SA1100
-/* use non-CDC for backwards compatibility */
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_M66592
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_AMD5536UDC
-#define DEV_CONFIG_CDC
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* "main" config is either CDC, or its simple subset */
-static inline int is_cdc(struct eth_dev *dev)
-{
-#if !defined(DEV_CONFIG_SUBSET)
- return 1; /* only cdc possible */
-#elif !defined (DEV_CONFIG_CDC)
- return 0; /* only subset possible */
-#else
- return dev->cdc; /* depends on what hardware we found */
-#endif
-}
-
-/* "secondary" RNDIS config may sometimes be activated */
-static inline int rndis_active(struct eth_dev *dev)
-{
-#ifdef CONFIG_USB_ETH_RNDIS
- return dev->rndis;
-#else
- return 0;
-#endif
-}
-
-#define subset_active(dev) (!is_cdc(dev) && !rndis_active(dev))
-#define cdc_active(dev) ( is_cdc(dev) && !rndis_active(dev))
-
-
-
-#define DEFAULT_QLEN 2 /* double buffering by default */
-
-/* peak bulk transfer bits-per-second */
-#define HS_BPS (13 * 512 * 8 * 1000 * 8)
-#define FS_BPS (19 * 64 * 1 * 1000 * 8)
-
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-#define DEVSPEED USB_SPEED_HIGH
-
-static unsigned qmult = 5;
-module_param (qmult, uint, S_IRUGO|S_IWUSR);
-
-
-/* for dual-speed hardware, use deeper queues at highspeed */
-#define qlen(gadget) \
- (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
-
-static inline int BITRATE(struct usb_gadget *g)
-{
- return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS;
-}
-
-#else /* full speed (low speed doesn't do bulk) */
-
-#define qmult 1
-
-#define DEVSPEED USB_SPEED_FULL
-
-#define qlen(gadget) DEFAULT_QLEN
-
-static inline int BITRATE(struct usb_gadget *g)
-{
- return FS_BPS;
-}
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-#define xprintk(d,level,fmt,args...) \
- printk(level "%s: " fmt , (d)->net->name , ## args)
-
-#ifdef DEBUG
-#undef DEBUG
-#define DEBUG(dev,fmt,args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DEBUG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#define VDEBUG DEBUG
-#else
-#define VDEBUG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#define ERROR(dev,fmt,args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
-
/*-------------------------------------------------------------------------*/
-/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
- * ep0 implementation: descriptors, config management, setup().
- * also optional class-specific notification interrupt transfer.
- */
-
-/*
- * DESCRIPTORS ... most are static, but strings and (full) configuration
- * descriptors are built on demand. For now we do either full CDC, or
- * our simple subset, with RNDIS as an optional second configuration.
- *
- * RNDIS includes some CDC ACM descriptors ... like CDC Ethernet. But
- * the class descriptors match a modem (they're ignored; it's really just
- * Ethernet functionality), they don't need the NOP altsetting, and the
- * status transfer endpoint isn't optional.
- */
-
-#define STRING_MANUFACTURER 1
-#define STRING_PRODUCT 2
-#define STRING_ETHADDR 3
-#define STRING_DATA 4
-#define STRING_CONTROL 5
-#define STRING_RNDIS_CONTROL 6
-#define STRING_CDC 7
-#define STRING_SUBSET 8
-#define STRING_RNDIS 9
-#define STRING_SERIALNUMBER 10
-
-/* holds our biggest descriptor (or RNDIS response) */
-#define USB_BUFSIZ 256
-
-/*
- * This device advertises one configuration, eth_config, unless RNDIS
- * is enabled (rndis_config) on hardware supporting at least two configs.
- *
- * NOTE: Controllers like superh_udc should probably be able to use
- * an RNDIS-only configuration.
- *
- * FIXME define some higher-powered configurations to make it easier
- * to recharge batteries ...
- */
-
-#define DEV_CONFIG_VALUE 1 /* cdc or subset */
-#define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */
-
-static struct usb_device_descriptor
-device_desc = {
+static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -438,2218 +139,234 @@ device_desc = {
.bDeviceClass = USB_CLASS_COMM,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
+ /* .bMaxPacketSize0 = f(hardware) */
+ /* Vendor and product id defaults change according to what configs
+ * we support. (As does bNumConfigurations.) These values can
+ * also be overridden by module parameters.
+ */
.idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM),
.idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
+ /* .bcdDevice = f(hardware) */
+ /* .iManufacturer = DYNAMIC */
+ /* .iProduct = DYNAMIC */
+ /* NO SERIAL NUMBER */
.bNumConfigurations = 1,
};
-static struct usb_otg_descriptor
-otg_descriptor = {
+static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
- .bmAttributes = USB_OTG_SRP,
-};
-
-static struct usb_config_descriptor
-eth_config = {
- .bLength = sizeof eth_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 2,
- .bConfigurationValue = DEV_CONFIG_VALUE,
- .iConfiguration = STRING_CDC,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 50,
-};
-
-#ifdef CONFIG_USB_ETH_RNDIS
-static struct usb_config_descriptor
-rndis_config = {
- .bLength = sizeof rndis_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 2,
- .bConfigurationValue = DEV_RNDIS_CONFIG_VALUE,
- .iConfiguration = STRING_RNDIS,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 50,
-};
-#endif
-
-/*
- * Compared to the simple CDC subset, the full CDC Ethernet model adds
- * three class descriptors, two interface descriptors, optional status
- * endpoint. Both have a "data" interface and two bulk endpoints.
- * There are also differences in how control requests are handled.
- *
- * RNDIS shares a lot with CDC-Ethernet, since it's a variant of the
- * CDC-ACM (modem) spec. Unfortunately MSFT's RNDIS driver is buggy; it
- * may hang or oops. Since bugfixes (or accurate specs, letting Linux
- * work around those bugs) are unlikely to ever come from MSFT, you may
- * wish to avoid using RNDIS.
- *
- * MCCI offers an alternative to RNDIS if you need to connect to Windows
- * but have hardware that can't support CDC Ethernet. We add descriptors
- * to present the CDC Subset as a (nonconformant) CDC MDLM variant called
- * "SAFE". That borrows from both CDC Ethernet and CDC MDLM. You can
- * get those drivers from MCCI, or bundled with various products.
- */
-
-#ifdef DEV_CONFIG_CDC
-static struct usb_interface_descriptor
-control_intf = {
- .bLength = sizeof control_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 0,
- /* status endpoint is optional; this may be patched later */
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
- .bInterfaceProtocol = USB_CDC_PROTO_NONE,
- .iInterface = STRING_CONTROL,
-};
-#endif
-
-#ifdef CONFIG_USB_ETH_RNDIS
-static const struct usb_interface_descriptor
-rndis_control_intf = {
- .bLength = sizeof rndis_control_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 0,
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
- .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR,
- .iInterface = STRING_RNDIS_CONTROL,
-};
-#endif
-
-static const struct usb_cdc_header_desc header_desc = {
- .bLength = sizeof header_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_HEADER_TYPE,
-
- .bcdCDC = __constant_cpu_to_le16 (0x0110),
-};
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-
-static const struct usb_cdc_union_desc union_desc = {
- .bLength = sizeof union_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_UNION_TYPE,
-
- .bMasterInterface0 = 0, /* index of control interface */
- .bSlaveInterface0 = 1, /* index of DATA interface */
-};
-
-#endif /* CDC || RNDIS */
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
- .bLength = sizeof call_mgmt_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
-
- .bmCapabilities = 0x00,
- .bDataInterface = 0x01,
-};
-
-static const struct usb_cdc_acm_descriptor acm_descriptor = {
- .bLength = sizeof acm_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ACM_TYPE,
-
- .bmCapabilities = 0x00,
-};
-
-#endif
-
-#ifndef DEV_CONFIG_CDC
-
-/* "SAFE" loosely follows CDC WMC MDLM, violating the spec in various
- * ways: data endpoints live in the control interface, there's no data
- * interface, and it's not used to talk to a cell phone radio.
- */
-
-static const struct usb_cdc_mdlm_desc mdlm_desc = {
- .bLength = sizeof mdlm_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_MDLM_TYPE,
-
- .bcdVersion = __constant_cpu_to_le16(0x0100),
- .bGUID = {
- 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
- 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
- },
-};
-
-/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
- * can't really use its struct. All we do here is say that we're using
- * the submode of "SAFE" which directly matches the CDC Subset.
- */
-static const u8 mdlm_detail_desc[] = {
- 6,
- USB_DT_CS_INTERFACE,
- USB_CDC_MDLM_DETAIL_TYPE,
-
- 0, /* "SAFE" */
- 0, /* network control capabilities (none) */
- 0, /* network data capabilities ("raw" encapsulation) */
-};
-
-#endif
-
-static const struct usb_cdc_ether_desc ether_desc = {
- .bLength = sizeof ether_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
-
- /* this descriptor actually adds value, surprise! */
- .iMACAddress = STRING_ETHADDR,
- .bmEthernetStatistics = __constant_cpu_to_le32 (0), /* no statistics */
- .wMaxSegmentSize = __constant_cpu_to_le16 (ETH_FRAME_LEN),
- .wNumberMCFilters = __constant_cpu_to_le16 (0),
- .bNumberPowerFilters = 0,
-};
-
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-
-/* include the status endpoint if we can, even where it's optional.
- * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
- * packet, to simplify cancellation; and a big transfer interval, to
- * waste less bandwidth.
- *
- * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
- * if they ignore the connect/disconnect notifications that real aether
- * can provide. more advanced cdc configurations might want to support
- * encapsulated commands (vendor-specific, using control-OUT).
- *
- * RNDIS requires the status endpoint, since it uses that encapsulation
- * mechanism for its funky RPC scheme.
- */
-
-#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
-#define STATUS_BYTECOUNT 16 /* 8 byte header + data */
-
-static struct usb_endpoint_descriptor
-fs_status_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
- .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
-};
-#endif
-
-#ifdef DEV_CONFIG_CDC
-
-/* the default data interface has no endpoints ... */
-
-static const struct usb_interface_descriptor
-data_nop_intf = {
- .bLength = sizeof data_nop_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 1,
- .bAlternateSetting = 0,
- .bNumEndpoints = 0,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
-};
-
-/* ... but the "real" data interface has two bulk endpoints */
-
-static const struct usb_interface_descriptor
-data_intf = {
- .bLength = sizeof data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 1,
- .bAlternateSetting = 1,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = STRING_DATA,
-};
-
-#endif
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-/* RNDIS doesn't activate by changing to the "real" altsetting */
-
-static const struct usb_interface_descriptor
-rndis_data_intf = {
- .bLength = sizeof rndis_data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 1,
- .bAlternateSetting = 0,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = STRING_DATA,
-};
-
-#endif
-
-#ifdef DEV_CONFIG_SUBSET
-
-/*
- * "Simple" CDC-subset option is a simple vendor-neutral model that most
- * full speed controllers can handle: one interface, two bulk endpoints.
- *
- * To assist host side drivers, we fancy it up a bit, and add descriptors
- * so some host side drivers will understand it as a "SAFE" variant.
- */
-
-static const struct usb_interface_descriptor
-subset_data_intf = {
- .bLength = sizeof subset_data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 0,
- .bAlternateSetting = 0,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM,
- .bInterfaceProtocol = 0,
- .iInterface = STRING_DATA,
-};
-
-#endif /* SUBSET */
-
-
-static struct usb_endpoint_descriptor
-fs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usb_endpoint_descriptor
-fs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_OUT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
-static const struct usb_descriptor_header *fs_eth_function [11] = {
+static const struct usb_descriptor_header *otg_desc[] = {
(struct usb_descriptor_header *) &otg_descriptor,
-#ifdef DEV_CONFIG_CDC
- /* "cdc" mode descriptors */
- (struct usb_descriptor_header *) &control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &ether_desc,
- /* NOTE: status endpoint may need to be removed */
- (struct usb_descriptor_header *) &fs_status_desc,
- /* data interface, with altsetting */
- (struct usb_descriptor_header *) &data_nop_intf,
- (struct usb_descriptor_header *) &data_intf,
- (struct usb_descriptor_header *) &fs_source_desc,
- (struct usb_descriptor_header *) &fs_sink_desc,
NULL,
-#endif /* DEV_CONFIG_CDC */
};
-static inline void __init fs_subset_descriptors(void)
-{
-#ifdef DEV_CONFIG_SUBSET
- /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
- fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
- fs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
- fs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
- fs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
- fs_eth_function[5] = (struct usb_descriptor_header *) &ether_desc;
- fs_eth_function[6] = (struct usb_descriptor_header *) &fs_source_desc;
- fs_eth_function[7] = (struct usb_descriptor_header *) &fs_sink_desc;
- fs_eth_function[8] = NULL;
-#else
- fs_eth_function[1] = NULL;
-#endif
-}
-#ifdef CONFIG_USB_ETH_RNDIS
-static const struct usb_descriptor_header *fs_rndis_function [] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- /* control interface matches ACM, not Ethernet */
- (struct usb_descriptor_header *) &rndis_control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &call_mgmt_descriptor,
- (struct usb_descriptor_header *) &acm_descriptor,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &fs_status_desc,
- /* data interface has no altsetting */
- (struct usb_descriptor_header *) &rndis_data_intf,
- (struct usb_descriptor_header *) &fs_source_desc,
- (struct usb_descriptor_header *) &fs_sink_desc,
- NULL,
-};
-#endif
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- */
+/* string IDs are assigned dynamically */
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-static struct usb_endpoint_descriptor
-hs_status_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
- .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
-};
-#endif /* DEV_CONFIG_CDC */
-
-static struct usb_endpoint_descriptor
-hs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
-};
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
-static struct usb_endpoint_descriptor
-hs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
+static char manufacturer[50];
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
+ { } /* end of list */
};
-static struct usb_qualifier_descriptor
-dev_qualifier = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
- .bDeviceClass = USB_CLASS_COMM,
-
- .bNumConfigurations = 1,
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
};
-static const struct usb_descriptor_header *hs_eth_function [11] = {
- (struct usb_descriptor_header *) &otg_descriptor,
-#ifdef DEV_CONFIG_CDC
- /* "cdc" mode descriptors */
- (struct usb_descriptor_header *) &control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &ether_desc,
- /* NOTE: status endpoint may need to be removed */
- (struct usb_descriptor_header *) &hs_status_desc,
- /* data interface, with altsetting */
- (struct usb_descriptor_header *) &data_nop_intf,
- (struct usb_descriptor_header *) &data_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
NULL,
-#endif /* DEV_CONFIG_CDC */
};
-static inline void __init hs_subset_descriptors(void)
-{
-#ifdef DEV_CONFIG_SUBSET
- /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
- hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
- hs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
- hs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
- hs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
- hs_eth_function[5] = (struct usb_descriptor_header *) &ether_desc;
- hs_eth_function[6] = (struct usb_descriptor_header *) &hs_source_desc;
- hs_eth_function[7] = (struct usb_descriptor_header *) &hs_sink_desc;
- hs_eth_function[8] = NULL;
-#else
- hs_eth_function[1] = NULL;
-#endif
-}
-
-#ifdef CONFIG_USB_ETH_RNDIS
-static const struct usb_descriptor_header *hs_rndis_function [] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- /* control interface matches ACM, not Ethernet */
- (struct usb_descriptor_header *) &rndis_control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &call_mgmt_descriptor,
- (struct usb_descriptor_header *) &acm_descriptor,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &hs_status_desc,
- /* data interface has no altsetting */
- (struct usb_descriptor_header *) &rndis_data_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
- NULL,
-};
-#endif
-
-
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *
-ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *fs)
-{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
-
+static u8 hostaddr[ETH_ALEN];
/*-------------------------------------------------------------------------*/
-/* descriptors that are built on-demand */
-
-static char manufacturer [50];
-static char product_desc [40] = DRIVER_DESC;
-static char serial_number [20];
-
-/* address that the host will use ... usually assigned at random */
-static char ethaddr [2 * ETH_ALEN + 1];
-
-/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
- { STRING_MANUFACTURER, manufacturer, },
- { STRING_PRODUCT, product_desc, },
- { STRING_SERIALNUMBER, serial_number, },
- { STRING_DATA, "Ethernet Data", },
- { STRING_ETHADDR, ethaddr, },
-#ifdef DEV_CONFIG_CDC
- { STRING_CDC, "CDC Ethernet", },
- { STRING_CONTROL, "CDC Communications Control", },
-#endif
-#ifdef DEV_CONFIG_SUBSET
- { STRING_SUBSET, "CDC Ethernet Subset", },
-#endif
-#ifdef CONFIG_USB_ETH_RNDIS
- { STRING_RNDIS, "RNDIS", },
- { STRING_RNDIS_CONTROL, "RNDIS Communications Control", },
-#endif
- { } /* end of list */
-};
-
-static struct usb_gadget_strings stringtab = {
- .language = 0x0409, /* en-us */
- .strings = strings,
-};
-
/*
- * one config, two interfaces: control, data.
- * complications: class descriptors, and an altsetting.
+ * We may not have an RNDIS configuration, but if we do it needs to be
+ * the first one present. That's to make Microsoft's drivers happy,
+ * and to follow DOCSIS 1.0 (cable modem standard).
*/
-static int
-config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
+static int __init rndis_do_config(struct usb_configuration *c)
{
- int len;
- const struct usb_config_descriptor *config;
- const struct usb_descriptor_header **function;
- int hs = 0;
+ /* FIXME alloc iConfiguration string, set it in c->strings */
- if (gadget_is_dualspeed(g)) {
- hs = (g->speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- hs = !hs;
+ if (gadget_is_otg(c->cdev->gadget)) {
+ c->descriptors = otg_desc;
+ c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
-#define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
-
- if (index >= device_desc.bNumConfigurations)
- return -EINVAL;
-
-#ifdef CONFIG_USB_ETH_RNDIS
- /* list the RNDIS config first, to make Microsoft's drivers
- * happy. DOCSIS 1.0 needs this too.
- */
- if (device_desc.bNumConfigurations == 2 && index == 0) {
- config = &rndis_config;
- function = which_fn (rndis);
- } else
-#endif
- {
- config = &eth_config;
- function = which_fn (eth);
- }
-
- /* for now, don't advertise srp-only devices */
- if (!is_otg)
- function++;
-
- len = usb_gadget_config_buf (config, buf, USB_BUFSIZ, function);
- if (len < 0)
- return len;
- ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
- return len;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void eth_start (struct eth_dev *dev, gfp_t gfp_flags);
-static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
-
-static int
-set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
-{
- int result = 0;
- struct usb_gadget *gadget = dev->gadget;
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- /* status endpoint used for RNDIS and (optionally) CDC */
- if (!subset_active(dev) && dev->status_ep) {
- dev->status = ep_desc (gadget, &hs_status_desc,
- &fs_status_desc);
- dev->status_ep->driver_data = dev;
-
- result = usb_ep_enable (dev->status_ep, dev->status);
- if (result != 0) {
- DEBUG (dev, "enable %s --> %d\n",
- dev->status_ep->name, result);
- goto done;
- }
- }
-#endif
-
- dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
- dev->in_ep->driver_data = dev;
-
- dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
- dev->out_ep->driver_data = dev;
-
- /* With CDC, the host isn't allowed to use these two data
- * endpoints in the default altsetting for the interface.
- * so we don't activate them yet. Reset from SET_INTERFACE.
- *
- * Strictly speaking RNDIS should work the same: activation is
- * a side effect of setting a packet filter. Deactivation is
- * from REMOTE_NDIS_HALT_MSG, reset from REMOTE_NDIS_RESET_MSG.
- */
- if (!cdc_active(dev)) {
- result = usb_ep_enable (dev->in_ep, dev->in);
- if (result != 0) {
- DEBUG(dev, "enable %s --> %d\n",
- dev->in_ep->name, result);
- goto done;
- }
-
- result = usb_ep_enable (dev->out_ep, dev->out);
- if (result != 0) {
- DEBUG (dev, "enable %s --> %d\n",
- dev->out_ep->name, result);
- goto done;
- }
- }
-
-done:
- if (result == 0)
- result = alloc_requests (dev, qlen (gadget), gfp_flags);
-
- /* on error, disable any endpoints */
- if (result < 0) {
- if (!subset_active(dev) && dev->status_ep)
- (void) usb_ep_disable (dev->status_ep);
- dev->status = NULL;
- (void) usb_ep_disable (dev->in_ep);
- (void) usb_ep_disable (dev->out_ep);
- dev->in = NULL;
- dev->out = NULL;
- }
-
- /* activate non-CDC configs right away
- * this isn't strictly according to the RNDIS spec
- */
- else if (!cdc_active (dev)) {
- netif_carrier_on (dev->net);
- if (netif_running (dev->net)) {
- spin_unlock (&dev->lock);
- eth_start (dev, GFP_ATOMIC);
- spin_lock (&dev->lock);
- }
- }
-
- if (result == 0)
- DEBUG (dev, "qlen %d\n", qlen (gadget));
-
- /* caller is responsible for cleanup on error */
- return result;
-}
-
-static void eth_reset_config (struct eth_dev *dev)
-{
- struct usb_request *req;
-
- if (dev->config == 0)
- return;
-
- DEBUG (dev, "%s\n", __func__);
-
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
-
- /* RNDIS enters RNDIS_UNINITIALIZED state */
- rndis_uninit(dev->rndis_config);
-
- /* disable endpoints, forcing (synchronous) completion of
- * pending i/o. then free the requests.
- */
- if (dev->in) {
- usb_ep_disable (dev->in_ep);
- spin_lock(&dev->req_lock);
- while (likely (!list_empty (&dev->tx_reqs))) {
- req = container_of (dev->tx_reqs.next,
- struct usb_request, list);
- list_del (&req->list);
-
- spin_unlock(&dev->req_lock);
- usb_ep_free_request (dev->in_ep, req);
- spin_lock(&dev->req_lock);
- }
- spin_unlock(&dev->req_lock);
- }
- if (dev->out) {
- usb_ep_disable (dev->out_ep);
- spin_lock(&dev->req_lock);
- while (likely (!list_empty (&dev->rx_reqs))) {
- req = container_of (dev->rx_reqs.next,
- struct usb_request, list);
- list_del (&req->list);
-
- spin_unlock(&dev->req_lock);
- usb_ep_free_request (dev->out_ep, req);
- spin_lock(&dev->req_lock);
- }
- spin_unlock(&dev->req_lock);
- }
-
- if (dev->status) {
- usb_ep_disable (dev->status_ep);
- }
- dev->rndis = 0;
- dev->cdc_filter = 0;
- dev->config = 0;
-}
-
-/* change our operational config. must agree with the code
- * that returns config descriptors, and altsetting code.
- */
-static int
-eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags)
-{
- int result = 0;
- struct usb_gadget *gadget = dev->gadget;
-
- if (gadget_is_sa1100 (gadget)
- && dev->config
- && atomic_read (&dev->tx_qlen) != 0) {
- /* tx fifo is full, but we can't clear it...*/
- INFO (dev, "can't change configurations\n");
- return -ESPIPE;
- }
- eth_reset_config (dev);
-
- switch (number) {
- case DEV_CONFIG_VALUE:
- result = set_ether_config (dev, gfp_flags);
- break;
-#ifdef CONFIG_USB_ETH_RNDIS
- case DEV_RNDIS_CONFIG_VALUE:
- dev->rndis = 1;
- result = set_ether_config (dev, gfp_flags);
- break;
-#endif
- default:
- result = -EINVAL;
- /* FALL THROUGH */
- case 0:
- break;
- }
-
- if (result) {
- if (number)
- eth_reset_config (dev);
- usb_gadget_vbus_draw(dev->gadget,
- gadget_is_otg(dev->gadget) ? 8 : 100);
- } else {
- char *speed;
- unsigned power;
-
- power = 2 * eth_config.bMaxPower;
- usb_gadget_vbus_draw(dev->gadget, power);
-
- switch (gadget->speed) {
- case USB_SPEED_FULL: speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- case USB_SPEED_HIGH: speed = "high"; break;
-#endif
- default: speed = "?"; break;
- }
-
- dev->config = number;
- INFO (dev, "%s speed config #%d: %d mA, %s, using %s\n",
- speed, number, power, driver_desc,
- rndis_active(dev)
- ? "RNDIS"
- : (cdc_active(dev)
- ? "CDC Ethernet"
- : "CDC Ethernet Subset"));
- }
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEV_CONFIG_CDC
-
-/* The interrupt endpoint is used in CDC networking models (Ethernet, ATM)
- * only to notify the host about link status changes (which we support) or
- * report completion of some encapsulated command (as used in RNDIS). Since
- * we want this CDC Ethernet code to be vendor-neutral, we don't use that
- * command mechanism; and only one status request is ever queued.
- */
-
-static void eth_status_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct usb_cdc_notification *event = req->buf;
- int value = req->status;
- struct eth_dev *dev = ep->driver_data;
- /* issue the second notification if host reads the first */
- if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION
- && value == 0) {
- __le32 *data = req->buf + sizeof *event;
-
- event->bmRequestType = 0xA1;
- event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
- event->wValue = __constant_cpu_to_le16 (0);
- event->wIndex = __constant_cpu_to_le16 (1);
- event->wLength = __constant_cpu_to_le16 (8);
-
- /* SPEED_CHANGE data is up/down speeds in bits/sec */
- data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget));
-
- req->length = STATUS_BYTECOUNT;
- value = usb_ep_queue (ep, req, GFP_ATOMIC);
- DEBUG (dev, "send SPEED_CHANGE --> %d\n", value);
- if (value == 0)
- return;
- } else if (value != -ECONNRESET)
- DEBUG (dev, "event %02x --> %d\n",
- event->bNotificationType, value);
- req->context = NULL;
+ return rndis_bind_config(c, hostaddr);
}
-static void issue_start_status (struct eth_dev *dev)
-{
- struct usb_request *req = dev->stat_req;
- struct usb_cdc_notification *event;
- int value;
-
- DEBUG (dev, "%s, flush old status first\n", __func__);
-
- /* flush old status
- *
- * FIXME ugly idiom, maybe we'd be better with just
- * a "cancel the whole queue" primitive since any
- * unlink-one primitive has way too many error modes.
- * here, we "know" toggle is already clear...
- *
- * FIXME iff req->context != null just dequeue it
- */
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
-
- /* 3.8.1 says to issue first NETWORK_CONNECTION, then
- * a SPEED_CHANGE. could be useful in some configs.
- */
- event = req->buf;
- event->bmRequestType = 0xA1;
- event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
- event->wValue = __constant_cpu_to_le16 (1); /* connected */
- event->wIndex = __constant_cpu_to_le16 (1);
- event->wLength = 0;
-
- req->length = sizeof *event;
- req->complete = eth_status_complete;
- req->context = dev;
-
- value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC);
- if (value < 0)
- DEBUG (dev, "status buf queue --> %d\n", value);
-}
-
-#endif
+static struct usb_configuration rndis_config_driver = {
+ .label = "RNDIS",
+ .bind = rndis_do_config,
+ .bConfigurationValue = 2,
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+};
/*-------------------------------------------------------------------------*/
-static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length)
- DEBUG ((struct eth_dev *) ep->driver_data,
- "setup complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
-}
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-static void rndis_response_complete (struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length)
- DEBUG ((struct eth_dev *) ep->driver_data,
- "rndis response complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
-
- /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */
-}
-
-static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct eth_dev *dev = ep->driver_data;
- int status;
-
- /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
- spin_lock(&dev->lock);
- status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf);
- if (status < 0)
- ERROR(dev, "%s: rndis parse error %d\n", __func__, status);
- spin_unlock(&dev->lock);
-}
-
-#endif /* RNDIS */
-
/*
- * The setup() callback implements all the ep0 functionality that's not
- * handled lower down. CDC has a number of less-common features:
- *
- * - two interfaces: control, and ethernet data
- * - Ethernet data interface has two altsettings: default, and active
- * - class-specific descriptors for the control interface
- * - class-specific control requests
+ * We _always_ have an ECM or CDC Subset configuration.
*/
-static int
-eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+static int __init eth_do_config(struct usb_configuration *c)
{
- struct eth_dev *dev = get_gadget_data (gadget);
- struct usb_request *req = dev->req;
- int value = -EOPNOTSUPP;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- /* descriptors just go into the pre-allocated ep0 buffer,
- * while config change events may enable network traffic.
- */
- req->complete = eth_setup_complete;
- switch (ctrl->bRequest) {
-
- case USB_REQ_GET_DESCRIPTOR:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
- switch (wValue >> 8) {
-
- case USB_DT_DEVICE:
- value = min (wLength, (u16) sizeof device_desc);
- memcpy (req->buf, &device_desc, value);
- break;
- case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
- break;
- value = min (wLength, (u16) sizeof dev_qualifier);
- memcpy (req->buf, &dev_qualifier, value);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
- break;
- // FALLTHROUGH
- case USB_DT_CONFIG:
- value = config_buf(gadget, req->buf,
- wValue >> 8,
- wValue & 0xff,
- gadget_is_otg(gadget));
- if (value >= 0)
- value = min (wLength, (u16) value);
- break;
-
- case USB_DT_STRING:
- value = usb_gadget_get_string (&stringtab,
- wValue & 0xff, req->buf);
- if (value >= 0)
- value = min (wLength, (u16) value);
- break;
- }
- break;
-
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != 0)
- break;
- if (gadget->a_hnp_support)
- DEBUG (dev, "HNP available\n");
- else if (gadget->a_alt_hnp_support)
- DEBUG (dev, "HNP needs a different root port\n");
- spin_lock (&dev->lock);
- value = eth_set_config (dev, wValue, GFP_ATOMIC);
- spin_unlock (&dev->lock);
- break;
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
- *(u8 *)req->buf = dev->config;
- value = min (wLength, (u16) 1);
- break;
+ /* FIXME alloc iConfiguration string, set it in c->strings */
- case USB_REQ_SET_INTERFACE:
- if (ctrl->bRequestType != USB_RECIP_INTERFACE
- || !dev->config
- || wIndex > 1)
- break;
- if (!cdc_active(dev) && wIndex != 0)
- break;
- spin_lock (&dev->lock);
-
- /* PXA hardware partially handles SET_INTERFACE;
- * we need to kluge around that interference.
- */
- if (gadget_is_pxa (gadget)) {
- value = eth_set_config (dev, DEV_CONFIG_VALUE,
- GFP_ATOMIC);
- goto done_set_intf;
- }
-
-#ifdef DEV_CONFIG_CDC
- switch (wIndex) {
- case 0: /* control/master intf */
- if (wValue != 0)
- break;
- if (dev->status) {
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
- }
- value = 0;
- break;
- case 1: /* data intf */
- if (wValue > 1)
- break;
- usb_ep_disable (dev->in_ep);
- usb_ep_disable (dev->out_ep);
-
- /* CDC requires the data transfers not be done from
- * the default interface setting ... also, setting
- * the non-default interface resets filters etc.
- */
- if (wValue == 1) {
- if (!cdc_active (dev))
- break;
- usb_ep_enable (dev->in_ep, dev->in);
- usb_ep_enable (dev->out_ep, dev->out);
- dev->cdc_filter = DEFAULT_FILTER;
- netif_carrier_on (dev->net);
- if (dev->status)
- issue_start_status (dev);
- if (netif_running (dev->net)) {
- spin_unlock (&dev->lock);
- eth_start (dev, GFP_ATOMIC);
- spin_lock (&dev->lock);
- }
- } else {
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
- }
- value = 0;
- break;
- }
-#else
- /* FIXME this is wrong, as is the assumption that
- * all non-PXA hardware talks real CDC ...
- */
- dev_warn (&gadget->dev, "set_interface ignored!\n");
-#endif /* DEV_CONFIG_CDC */
-
-done_set_intf:
- spin_unlock (&dev->lock);
- break;
- case USB_REQ_GET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
- || !dev->config
- || wIndex > 1)
- break;
- if (!(cdc_active(dev) || rndis_active(dev)) && wIndex != 0)
- break;
-
- /* for CDC, iff carrier is on, data interface is active. */
- if (rndis_active(dev) || wIndex != 1)
- *(u8 *)req->buf = 0;
- else
- *(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0;
- value = min (wLength, (u16) 1);
- break;
-
-#ifdef DEV_CONFIG_CDC
- case USB_CDC_SET_ETHERNET_PACKET_FILTER:
- /* see 6.2.30: no data, wIndex = interface,
- * wValue = packet filter bitmap
- */
- if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- || !cdc_active(dev)
- || wLength != 0
- || wIndex > 1)
- break;
- DEBUG (dev, "packet filter %02x\n", wValue);
- dev->cdc_filter = wValue;
- value = 0;
- break;
-
- /* and potentially:
- * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
- * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
- * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
- * case USB_CDC_GET_ETHERNET_STATISTIC:
- */
-
-#endif /* DEV_CONFIG_CDC */
-
-#ifdef CONFIG_USB_ETH_RNDIS
- /* RNDIS uses the CDC command encapsulation mechanism to implement
- * an RPC scheme, with much getting/setting of attributes by OID.
- */
- case USB_CDC_SEND_ENCAPSULATED_COMMAND:
- if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- || !rndis_active(dev)
- || wLength > USB_BUFSIZ
- || wValue
- || rndis_control_intf.bInterfaceNumber
- != wIndex)
- break;
- /* read the request, then process it */
- value = wLength;
- req->complete = rndis_command_complete;
- /* later, rndis_control_ack () sends a notification */
- break;
-
- case USB_CDC_GET_ENCAPSULATED_RESPONSE:
- if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- == ctrl->bRequestType
- && rndis_active(dev)
- // && wLength >= 0x0400
- && !wValue
- && rndis_control_intf.bInterfaceNumber
- == wIndex) {
- u8 *buf;
- u32 n;
-
- /* return the result */
- buf = rndis_get_next_response(dev->rndis_config, &n);
- if (buf) {
- memcpy(req->buf, buf, n);
- req->complete = rndis_response_complete;
- rndis_free_response(dev->rndis_config, buf);
- value = n;
- }
- /* else stalls ... spec says to avoid that */
- }
- break;
-#endif /* RNDIS */
-
- default:
- VDEBUG (dev,
- "unknown control req%02x.%02x v%04x i%04x l%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- }
-
- /* respond with data transfer before status phase? */
- if (value >= 0) {
- req->length = value;
- req->zero = value < wLength
- && (value % gadget->ep0->maxpacket) == 0;
- value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
- if (value < 0) {
- DEBUG (dev, "ep_queue --> %d\n", value);
- req->status = 0;
- eth_setup_complete (gadget->ep0, req);
- }
+ if (gadget_is_otg(c->cdev->gadget)) {
+ c->descriptors = otg_desc;
+ c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- /* host either stalls (value < 0) or reports success */
- return value;
-}
-
-static void
-eth_disconnect (struct usb_gadget *gadget)
-{
- struct eth_dev *dev = get_gadget_data (gadget);
- unsigned long flags;
-
- spin_lock_irqsave (&dev->lock, flags);
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
- eth_reset_config (dev);
- spin_unlock_irqrestore (&dev->lock, flags);
-
- /* next we may get setup() calls to enumerate new connections;
- * or an unbind() during shutdown (including removing module).
- */
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
-
-static int eth_change_mtu (struct net_device *net, int new_mtu)
-{
- struct eth_dev *dev = netdev_priv(net);
-
- if (dev->rndis)
- return -EBUSY;
-
- if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
- return -ERANGE;
- /* no zero-length packet read wanted after mtu-sized packets */
- if (((new_mtu + sizeof (struct ethhdr)) % dev->in_ep->maxpacket) == 0)
- return -EDOM;
- net->mtu = new_mtu;
- return 0;
-}
-
-static struct net_device_stats *eth_get_stats (struct net_device *net)
-{
- return &((struct eth_dev *)netdev_priv(net))->stats;
-}
-
-static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
-{
- struct eth_dev *dev = netdev_priv(net);
- strlcpy(p->driver, shortname, sizeof p->driver);
- strlcpy(p->version, DRIVER_VERSION, sizeof p->version);
- strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version);
- strlcpy (p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
-}
-
-static u32 eth_get_link(struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
-static struct ethtool_ops ops = {
- .get_drvinfo = eth_get_drvinfo,
- .get_link = eth_get_link
-};
-
-static void defer_kevent (struct eth_dev *dev, int flag)
-{
- if (test_and_set_bit (flag, &dev->todo))
- return;
- if (!schedule_work (&dev->work))
- ERROR (dev, "kevent %d may have been dropped\n", flag);
+ if (can_support_ecm(c->cdev->gadget))
+ return ecm_bind_config(c, hostaddr);
else
- DEBUG (dev, "kevent %d scheduled\n", flag);
-}
-
-static void rx_complete (struct usb_ep *ep, struct usb_request *req);
-
-static int
-rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
-{
- struct sk_buff *skb;
- int retval = -ENOMEM;
- size_t size;
-
- /* Padding up to RX_EXTRA handles minor disagreements with host.
- * Normally we use the USB "terminate on short read" convention;
- * so allow up to (N*maxpacket), since that memory is normally
- * already allocated. Some hardware doesn't deal well with short
- * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
- * byte off the end (to force hardware errors on overflow).
- *
- * RNDIS uses internal framing, and explicitly allows senders to
- * pad to end-of-packet. That's potentially nice for speed,
- * but means receivers can't recover synch on their own.
- */
- size = (sizeof (struct ethhdr) + dev->net->mtu + RX_EXTRA);
- size += dev->out_ep->maxpacket - 1;
- if (rndis_active(dev))
- size += sizeof (struct rndis_packet_msg_type);
- size -= size % dev->out_ep->maxpacket;
-
- skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
- if (skb == NULL) {
- DEBUG (dev, "no rx skb\n");
- goto enomem;
- }
-
- /* Some platforms perform better when IP packets are aligned,
- * but on at least one, checksumming fails otherwise. Note:
- * RNDIS headers involve variable numbers of LE32 values.
- */
- skb_reserve(skb, NET_IP_ALIGN);
-
- req->buf = skb->data;
- req->length = size;
- req->complete = rx_complete;
- req->context = skb;
-
- retval = usb_ep_queue (dev->out_ep, req, gfp_flags);
- if (retval == -ENOMEM)
-enomem:
- defer_kevent (dev, WORK_RX_MEMORY);
- if (retval) {
- DEBUG (dev, "rx submit --> %d\n", retval);
- if (skb)
- dev_kfree_skb_any(skb);
- spin_lock(&dev->req_lock);
- list_add (&req->list, &dev->rx_reqs);
- spin_unlock(&dev->req_lock);
- }
- return retval;
-}
-
-static void rx_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct sk_buff *skb = req->context;
- struct eth_dev *dev = ep->driver_data;
- int status = req->status;
-
- switch (status) {
-
- /* normal completion */
- case 0:
- skb_put (skb, req->actual);
- /* we know MaxPacketsPerTransfer == 1 here */
- if (rndis_active(dev))
- status = rndis_rm_hdr (skb);
- if (status < 0
- || ETH_HLEN > skb->len
- || skb->len > ETH_FRAME_LEN) {
- dev->stats.rx_errors++;
- dev->stats.rx_length_errors++;
- DEBUG (dev, "rx length %d\n", skb->len);
- break;
- }
-
- skb->protocol = eth_type_trans (skb, dev->net);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
-
- /* no buffer copies needed, unless hardware can't
- * use skb buffers.
- */
- status = netif_rx (skb);
- skb = NULL;
- break;
-
- /* software-driven interface shutdown */
- case -ECONNRESET: // unlink
- case -ESHUTDOWN: // disconnect etc
- VDEBUG (dev, "rx shutdown, code %d\n", status);
- goto quiesce;
-
- /* for hardware automagic (such as pxa) */
- case -ECONNABORTED: // endpoint reset
- DEBUG (dev, "rx %s reset\n", ep->name);
- defer_kevent (dev, WORK_RX_MEMORY);
-quiesce:
- dev_kfree_skb_any (skb);
- goto clean;
-
- /* data overrun */
- case -EOVERFLOW:
- dev->stats.rx_over_errors++;
- // FALLTHROUGH
-
- default:
- dev->stats.rx_errors++;
- DEBUG (dev, "rx status %d\n", status);
- break;
- }
-
- if (skb)
- dev_kfree_skb_any (skb);
- if (!netif_running (dev->net)) {
-clean:
- spin_lock(&dev->req_lock);
- list_add (&req->list, &dev->rx_reqs);
- spin_unlock(&dev->req_lock);
- req = NULL;
- }
- if (req)
- rx_submit (dev, req, GFP_ATOMIC);
-}
-
-static int prealloc (struct list_head *list, struct usb_ep *ep,
- unsigned n, gfp_t gfp_flags)
-{
- unsigned i;
- struct usb_request *req;
-
- if (!n)
- return -ENOMEM;
-
- /* queue/recycle up to N requests */
- i = n;
- list_for_each_entry (req, list, list) {
- if (i-- == 0)
- goto extra;
- }
- while (i--) {
- req = usb_ep_alloc_request (ep, gfp_flags);
- if (!req)
- return list_empty (list) ? -ENOMEM : 0;
- list_add (&req->list, list);
- }
- return 0;
-
-extra:
- /* free extras */
- for (;;) {
- struct list_head *next;
-
- next = req->list.next;
- list_del (&req->list);
- usb_ep_free_request (ep, req);
-
- if (next == list)
- break;
-
- req = container_of (next, struct usb_request, list);
- }
- return 0;
-}
-
-static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
-{
- int status;
-
- spin_lock(&dev->req_lock);
- status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
- if (status < 0)
- goto fail;
- status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
- if (status < 0)
- goto fail;
- goto done;
-fail:
- DEBUG (dev, "can't alloc requests\n");
-done:
- spin_unlock(&dev->req_lock);
- return status;
+ return geth_bind_config(c, hostaddr);
}
-static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags)
-{
- struct usb_request *req;
- unsigned long flags;
-
- /* fill unused rxq slots with some skb */
- spin_lock_irqsave(&dev->req_lock, flags);
- while (!list_empty (&dev->rx_reqs)) {
- req = container_of (dev->rx_reqs.next,
- struct usb_request, list);
- list_del_init (&req->list);
- spin_unlock_irqrestore(&dev->req_lock, flags);
-
- if (rx_submit (dev, req, gfp_flags) < 0) {
- defer_kevent (dev, WORK_RX_MEMORY);
- return;
- }
-
- spin_lock_irqsave(&dev->req_lock, flags);
- }
- spin_unlock_irqrestore(&dev->req_lock, flags);
-}
-
-static void eth_work (struct work_struct *work)
-{
- struct eth_dev *dev = container_of(work, struct eth_dev, work);
-
- if (test_and_clear_bit (WORK_RX_MEMORY, &dev->todo)) {
- if (netif_running (dev->net))
- rx_fill (dev, GFP_KERNEL);
- }
-
- if (dev->todo)
- DEBUG (dev, "work done, flags = 0x%lx\n", dev->todo);
-}
-
-static void tx_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct sk_buff *skb = req->context;
- struct eth_dev *dev = ep->driver_data;
-
- switch (req->status) {
- default:
- dev->stats.tx_errors++;
- VDEBUG (dev, "tx err %d\n", req->status);
- /* FALLTHROUGH */
- case -ECONNRESET: // unlink
- case -ESHUTDOWN: // disconnect etc
- break;
- case 0:
- dev->stats.tx_bytes += skb->len;
- }
- dev->stats.tx_packets++;
-
- spin_lock(&dev->req_lock);
- list_add (&req->list, &dev->tx_reqs);
- spin_unlock(&dev->req_lock);
- dev_kfree_skb_any (skb);
-
- atomic_dec (&dev->tx_qlen);
- if (netif_carrier_ok (dev->net))
- netif_wake_queue (dev->net);
-}
-
-static inline int eth_is_promisc (struct eth_dev *dev)
-{
- /* no filters for the CDC subset; always promisc */
- if (subset_active (dev))
- return 1;
- return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
-}
-
-static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- int length = skb->len;
- int retval;
- struct usb_request *req = NULL;
- unsigned long flags;
-
- /* apply outgoing CDC or RNDIS filters */
- if (!eth_is_promisc (dev)) {
- u8 *dest = skb->data;
-
- if (is_multicast_ether_addr(dest)) {
- u16 type;
-
- /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
- * SET_ETHERNET_MULTICAST_FILTERS requests
- */
- if (is_broadcast_ether_addr(dest))
- type = USB_CDC_PACKET_TYPE_BROADCAST;
- else
- type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
- if (!(dev->cdc_filter & type)) {
- dev_kfree_skb_any (skb);
- return 0;
- }
- }
- /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
- }
-
- spin_lock_irqsave(&dev->req_lock, flags);
- /*
- * this freelist can be empty if an interrupt triggered disconnect()
- * and reconfigured the gadget (shutting down this queue) after the
- * network stack decided to xmit but before we got the spinlock.
- */
- if (list_empty(&dev->tx_reqs)) {
- spin_unlock_irqrestore(&dev->req_lock, flags);
- return 1;
- }
-
- req = container_of (dev->tx_reqs.next, struct usb_request, list);
- list_del (&req->list);
-
- /* temporarily stop TX queue when the freelist empties */
- if (list_empty (&dev->tx_reqs))
- netif_stop_queue (net);
- spin_unlock_irqrestore(&dev->req_lock, flags);
-
- /* no buffer copies needed, unless the network stack did it
- * or the hardware can't use skb buffers.
- * or there's not enough space for any RNDIS headers we need
- */
- if (rndis_active(dev)) {
- struct sk_buff *skb_rndis;
-
- skb_rndis = skb_realloc_headroom (skb,
- sizeof (struct rndis_packet_msg_type));
- if (!skb_rndis)
- goto drop;
-
- dev_kfree_skb_any (skb);
- skb = skb_rndis;
- rndis_add_hdr (skb);
- length = skb->len;
- }
- req->buf = skb->data;
- req->context = skb;
- req->complete = tx_complete;
-
- /* use zlp framing on tx for strict CDC-Ether conformance,
- * though any robust network rx path ignores extra padding.
- * and some hardware doesn't like to write zlps.
- */
- req->zero = 1;
- if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0)
- length++;
-
- req->length = length;
-
- /* throttle highspeed IRQ rate back slightly */
- if (gadget_is_dualspeed(dev->gadget))
- req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
- ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
- : 0;
-
- retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
- switch (retval) {
- default:
- DEBUG (dev, "tx queue err %d\n", retval);
- break;
- case 0:
- net->trans_start = jiffies;
- atomic_inc (&dev->tx_qlen);
- }
-
- if (retval) {
-drop:
- dev->stats.tx_dropped++;
- dev_kfree_skb_any (skb);
- spin_lock_irqsave(&dev->req_lock, flags);
- if (list_empty (&dev->tx_reqs))
- netif_start_queue (net);
- list_add (&req->list, &dev->tx_reqs);
- spin_unlock_irqrestore(&dev->req_lock, flags);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-/* The interrupt endpoint is used in RNDIS to notify the host when messages
- * other than data packets are available ... notably the REMOTE_NDIS_*_CMPLT
- * messages, but also REMOTE_NDIS_INDICATE_STATUS_MSG and potentially even
- * REMOTE_NDIS_KEEPALIVE_MSG.
- *
- * The RNDIS control queue is processed by GET_ENCAPSULATED_RESPONSE, and
- * normally just one notification will be queued.
- */
-
-static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, gfp_t);
-static void eth_req_free (struct usb_ep *ep, struct usb_request *req);
-
-static void
-rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct eth_dev *dev = ep->driver_data;
-
- if (req->status || req->actual != req->length)
- DEBUG (dev,
- "rndis control ack complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
- req->context = NULL;
-
- if (req != dev->stat_req)
- eth_req_free(ep, req);
-}
-
-static void rndis_resp_avail(void *_dev)
-{
- struct eth_dev *dev = _dev;
- int length;
- struct usb_request *resp = dev->stat_req;
-
- /* in case RNDIS calls this after disconnect */
- if (!dev->status) {
- DEBUG (dev, "status ENODEV\n");
- return;
- }
-
- /* in case queue length > 1 */
- if (resp->context) {
- resp = eth_req_alloc (dev->status_ep, 8, GFP_ATOMIC);
- if (!resp)
- return;
- }
-
- /* Send RNDIS RESPONSE_AVAILABLE notification;
- * USB_CDC_NOTIFY_RESPONSE_AVAILABLE should work too
- */
- resp->length = 8;
- resp->complete = rndis_control_ack_complete;
- resp->context = dev;
-
- *((__le32 *) resp->buf) = __constant_cpu_to_le32 (1);
- *((__le32 *) resp->buf + 1) = __constant_cpu_to_le32 (0);
-
- length = usb_ep_queue (dev->status_ep, resp, GFP_ATOMIC);
- if (length < 0) {
- resp->status = 0;
- rndis_control_ack_complete (dev->status_ep, resp);
- }
-}
-
-#else
-
-#define rndis_resp_avail NULL
-
-#endif /* RNDIS */
-
-static void eth_start (struct eth_dev *dev, gfp_t gfp_flags)
-{
- DEBUG (dev, "%s\n", __func__);
-
- /* fill the rx queue */
- rx_fill (dev, gfp_flags);
-
- /* and open the tx floodgates */
- atomic_set (&dev->tx_qlen, 0);
- netif_wake_queue (dev->net);
- if (rndis_active(dev)) {
- rndis_set_param_medium (dev->rndis_config,
- NDIS_MEDIUM_802_3,
- BITRATE(dev->gadget)/100);
- (void) rndis_signal_connect (dev->rndis_config);
- }
-}
-
-static int eth_open (struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
-
- DEBUG (dev, "%s\n", __func__);
- if (netif_carrier_ok (dev->net))
- eth_start (dev, GFP_KERNEL);
- return 0;
-}
-
-static int eth_stop (struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
-
- VDEBUG (dev, "%s\n", __func__);
- netif_stop_queue (net);
-
- DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
- dev->stats.rx_packets, dev->stats.tx_packets,
- dev->stats.rx_errors, dev->stats.tx_errors
- );
-
- /* ensure there are no more active requests */
- if (dev->config) {
- usb_ep_disable (dev->in_ep);
- usb_ep_disable (dev->out_ep);
- if (netif_carrier_ok (dev->net)) {
- DEBUG (dev, "host still using in/out endpoints\n");
- // FIXME idiom may leave toggle wrong here
- usb_ep_enable (dev->in_ep, dev->in);
- usb_ep_enable (dev->out_ep, dev->out);
- }
- if (dev->status_ep) {
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
- }
- }
-
- if (rndis_active(dev)) {
- rndis_set_param_medium(dev->rndis_config, NDIS_MEDIUM_802_3, 0);
- (void) rndis_signal_disconnect (dev->rndis_config);
- }
-
- return 0;
-}
+static struct usb_configuration eth_config_driver = {
+ /* .label = f(hardware) */
+ .bind = eth_do_config,
+ .bConfigurationValue = 1,
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+};
/*-------------------------------------------------------------------------*/
-static struct usb_request *
-eth_req_alloc (struct usb_ep *ep, unsigned size, gfp_t gfp_flags)
+static int __init eth_bind(struct usb_composite_dev *cdev)
{
- struct usb_request *req;
-
- req = usb_ep_alloc_request (ep, gfp_flags);
- if (!req)
- return NULL;
-
- req->buf = kmalloc (size, gfp_flags);
- if (!req->buf) {
- usb_ep_free_request (ep, req);
- req = NULL;
- }
- return req;
-}
-
-static void
-eth_req_free (struct usb_ep *ep, struct usb_request *req)
-{
- kfree (req->buf);
- usb_ep_free_request (ep, req);
-}
-
-
-static void /* __init_or_exit */
-eth_unbind (struct usb_gadget *gadget)
-{
- struct eth_dev *dev = get_gadget_data (gadget);
-
- DEBUG (dev, "unbind\n");
- rndis_deregister (dev->rndis_config);
- rndis_exit ();
-
- /* we've already been disconnected ... no i/o is active */
- if (dev->req) {
- eth_req_free (gadget->ep0, dev->req);
- dev->req = NULL;
- }
- if (dev->stat_req) {
- eth_req_free (dev->status_ep, dev->stat_req);
- dev->stat_req = NULL;
- }
-
- unregister_netdev (dev->net);
- free_netdev(dev->net);
-
- /* assuming we used keventd, it must quiesce too */
- flush_scheduled_work ();
- set_gadget_data (gadget, NULL);
-}
-
-static u8 __init nibble (unsigned char c)
-{
- if (likely (isdigit (c)))
- return c - '0';
- c = toupper (c);
- if (likely (isxdigit (c)))
- return 10 + c - 'A';
- return 0;
-}
+ int gcnum;
+ struct usb_gadget *gadget = cdev->gadget;
+ int status;
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
-{
- if (str) {
- unsigned i;
+ /* set up network link layer */
+ status = gether_setup(cdev->gadget, hostaddr);
+ if (status < 0)
+ return status;
- for (i = 0; i < 6; i++) {
- unsigned char num;
+ /* set up main config label and device descriptor */
+ if (can_support_ecm(cdev->gadget)) {
+ /* ECM */
+ eth_config_driver.label = "CDC Ethernet (ECM)";
+ } else {
+ /* CDC Subset */
+ eth_config_driver.label = "CDC Subset/SAFE";
- if((*str == '.') || (*str == ':'))
- str++;
- num = nibble(*str++) << 4;
- num |= (nibble(*str++));
- dev_addr [i] = num;
- }
- if (is_valid_ether_addr (dev_addr))
- return 0;
+ device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
+ device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
}
- random_ether_addr(dev_addr);
- return 1;
-}
-
-static int __init
-eth_bind (struct usb_gadget *gadget)
-{
- struct eth_dev *dev;
- struct net_device *net;
- u8 cdc = 1, zlp = 1, rndis = 1;
- struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
- int status = -ENOMEM;
- int gcnum;
-
- /* these flags are only ever cleared; compiler take note */
-#ifndef DEV_CONFIG_CDC
- cdc = 0;
-#endif
-#ifndef CONFIG_USB_ETH_RNDIS
- rndis = 0;
-#endif
- /* Because most host side USB stacks handle CDC Ethernet, that
- * standard protocol is _strongly_ preferred for interop purposes.
- * (By everyone except Microsoft.)
- */
- if (gadget_is_pxa (gadget)) {
- /* pxa doesn't support altsettings */
- cdc = 0;
- } else if (gadget_is_musbhdrc(gadget)) {
- /* reduce tx dma overhead by avoiding special cases */
- zlp = 0;
- } else if (gadget_is_sh(gadget)) {
- /* sh doesn't support multiple interfaces or configs */
- cdc = 0;
- rndis = 0;
- } else if (gadget_is_sa1100 (gadget)) {
- /* hardware can't write zlps */
- zlp = 0;
- /* sa1100 CAN do CDC, without status endpoint ... we use
- * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
- */
- cdc = 0;
+ if (has_rndis()) {
+ /* RNDIS plus ECM-or-Subset */
+ device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
+ device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+ device_desc.bNumConfigurations = 2;
}
- gcnum = usb_gadget_controller_number (gadget);
+ gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
else {
- /* can't assume CDC works. don't want to default to
- * anything less functional on CDC-capable hardware,
- * so we fail in this case.
+ /* We assume that can_support_ecm() tells the truth;
+ * but if the controller isn't recognized at all then
+ * that assumption is a bit more likely to be wrong.
*/
- dev_err (&gadget->dev,
- "controller '%s' not recognized\n",
- gadget->name);
- return -ENODEV;
+ WARN(cdev, "controller '%s' not recognized; trying %s\n",
+ gadget->name,
+ eth_config_driver.label);
+ device_desc.bcdDevice =
+ __constant_cpu_to_le16(0x0300 | 0x0099);
}
- snprintf (manufacturer, sizeof manufacturer, "%s %s/%s",
- init_utsname()->sysname, init_utsname()->release,
- gadget->name);
- /* If there's an RNDIS configuration, that's what Windows wants to
- * be using ... so use these product IDs here and in the "linux.inf"
- * needed to install MSFT drivers. Current Linux kernels will use
- * the second configuration if it's CDC Ethernet, and need some help
- * to choose the right configuration otherwise.
- */
- if (rndis) {
- device_desc.idVendor =
- __constant_cpu_to_le16(RNDIS_VENDOR_NUM);
- device_desc.idProduct =
- __constant_cpu_to_le16(RNDIS_PRODUCT_NUM);
- snprintf (product_desc, sizeof product_desc,
- "RNDIS/%s", driver_desc);
- /* CDC subset ... recognized by Linux since 2.4.10, but Windows
- * drivers aren't widely available. (That may be improved by
- * supporting one submode of the "SAFE" variant of MDLM.)
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
*/
- } else if (!cdc) {
- device_desc.idVendor =
- __constant_cpu_to_le16(SIMPLE_VENDOR_NUM);
- device_desc.idProduct =
- __constant_cpu_to_le16(SIMPLE_PRODUCT_NUM);
- }
-
- /* support optional vendor/distro customization */
- if (idVendor) {
- if (!idProduct) {
- dev_err (&gadget->dev, "idVendor needs idProduct!\n");
- return -ENODEV;
- }
- device_desc.idVendor = cpu_to_le16(idVendor);
- device_desc.idProduct = cpu_to_le16(idProduct);
- if (bcdDevice)
- device_desc.bcdDevice = cpu_to_le16(bcdDevice);
- }
- if (iManufacturer)
- strlcpy (manufacturer, iManufacturer, sizeof manufacturer);
- if (iProduct)
- strlcpy (product_desc, iProduct, sizeof product_desc);
- if (iSerialNumber) {
- device_desc.iSerialNumber = STRING_SERIALNUMBER,
- strlcpy(serial_number, iSerialNumber, sizeof serial_number);
- }
-
- /* all we really need is bulk IN/OUT */
- usb_ep_autoconfig_reset (gadget);
- in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
- if (!in_ep) {
-autoconf_fail:
- dev_err (&gadget->dev,
- "can't autoconfigure on %s\n",
- gadget->name);
- return -ENODEV;
- }
- in_ep->driver_data = in_ep; /* claim */
-
- out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
- if (!out_ep)
- goto autoconf_fail;
- out_ep->driver_data = out_ep; /* claim */
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- /* CDC Ethernet control interface doesn't require a status endpoint.
- * Since some hosts expect one, try to allocate one anyway.
- */
- if (cdc || rndis) {
- status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
- if (status_ep) {
- status_ep->driver_data = status_ep; /* claim */
- } else if (rndis) {
- dev_err (&gadget->dev,
- "can't run RNDIS on %s\n",
- gadget->name);
- return -ENODEV;
-#ifdef DEV_CONFIG_CDC
- /* pxa25x only does CDC subset; often used with RNDIS */
- } else if (cdc) {
- control_intf.bNumEndpoints = 0;
- /* FIXME remove endpoint from descriptor list */
-#endif
- }
- }
-#endif
-
- /* one config: cdc, else minimal subset */
- if (!cdc) {
- eth_config.bNumInterfaces = 1;
- eth_config.iConfiguration = STRING_SUBSET;
-
- /* use functions to set these up, in case we're built to work
- * with multiple controllers and must override CDC Ethernet.
- */
- fs_subset_descriptors();
- hs_subset_descriptors();
- }
-
- device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
- usb_gadget_set_selfpowered (gadget);
-
- /* For now RNDIS is always a second config */
- if (rndis)
- device_desc.bNumConfigurations = 2;
-
- if (gadget_is_dualspeed(gadget)) {
- if (rndis)
- dev_qualifier.bNumConfigurations = 2;
- else if (!cdc)
- dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
-
- /* assumes ep0 uses the same value for both speeds ... */
- dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-
- /* and that all endpoints are dual-speed */
- hs_source_desc.bEndpointAddress =
- fs_source_desc.bEndpointAddress;
- hs_sink_desc.bEndpointAddress =
- fs_sink_desc.bEndpointAddress;
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- if (status_ep)
- hs_status_desc.bEndpointAddress =
- fs_status_desc.bEndpointAddress;
-#endif
- }
-
- if (gadget_is_otg(gadget)) {
- otg_descriptor.bmAttributes |= USB_OTG_HNP,
- eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- eth_config.bMaxPower = 4;
-#ifdef CONFIG_USB_ETH_RNDIS
- rndis_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- rndis_config.bMaxPower = 4;
-#endif
- }
- net = alloc_etherdev (sizeof *dev);
- if (!net)
- return status;
- dev = netdev_priv(net);
- spin_lock_init (&dev->lock);
- spin_lock_init (&dev->req_lock);
- INIT_WORK (&dev->work, eth_work);
- INIT_LIST_HEAD (&dev->tx_reqs);
- INIT_LIST_HEAD (&dev->rx_reqs);
-
- /* network device setup */
- dev->net = net;
- strcpy (net->name, "usb%d");
- dev->cdc = cdc;
- dev->zlp = zlp;
-
- dev->in_ep = in_ep;
- dev->out_ep = out_ep;
- dev->status_ep = status_ep;
-
- /* Module params for these addresses should come from ID proms.
- * The host side address is used with CDC and RNDIS, and commonly
- * ends up in a persistent config database. It's not clear if
- * host side code for the SAFE thing cares -- its original BLAN
- * thing didn't, Sharp never assigned those addresses on Zaurii.
- */
- if (get_ether_addr(dev_addr, net->dev_addr))
- dev_warn(&gadget->dev,
- "using random %s ethernet address\n", "self");
- if (get_ether_addr(host_addr, dev->host_mac))
- dev_warn(&gadget->dev,
- "using random %s ethernet address\n", "host");
- snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
- dev->host_mac [0], dev->host_mac [1],
- dev->host_mac [2], dev->host_mac [3],
- dev->host_mac [4], dev->host_mac [5]);
-
- if (rndis) {
- status = rndis_init();
- if (status < 0) {
- dev_err (&gadget->dev, "can't init RNDIS, %d\n",
- status);
- goto fail;
- }
- }
-
- net->change_mtu = eth_change_mtu;
- net->get_stats = eth_get_stats;
- net->hard_start_xmit = eth_start_xmit;
- net->open = eth_open;
- net->stop = eth_stop;
- // watchdog_timeo, tx_timeout ...
- // set_multicast_list
- SET_ETHTOOL_OPS(net, &ops);
+ /* device descriptor strings: manufacturer, product */
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+ init_utsname()->sysname, init_utsname()->release,
+ gadget->name);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_MANUFACTURER_IDX].id = status;
+ device_desc.iManufacturer = status;
- /* preallocate control message data and buffer */
- dev->req = eth_req_alloc (gadget->ep0, USB_BUFSIZ, GFP_KERNEL);
- if (!dev->req)
+ status = usb_string_id(cdev);
+ if (status < 0)
goto fail;
- dev->req->complete = eth_setup_complete;
+ strings_dev[STRING_PRODUCT_IDX].id = status;
+ device_desc.iProduct = status;
- /* ... and maybe likewise for status transfer */
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- if (dev->status_ep) {
- dev->stat_req = eth_req_alloc (dev->status_ep,
- STATUS_BYTECOUNT, GFP_KERNEL);
- if (!dev->stat_req) {
- eth_req_free (gadget->ep0, dev->req);
+ /* register our configuration(s); RNDIS first, if it's used */
+ if (has_rndis()) {
+ status = usb_add_config(cdev, &rndis_config_driver);
+ if (status < 0)
goto fail;
- }
- dev->stat_req->context = NULL;
}
-#endif
-
- /* finish hookup to lower layer ... */
- dev->gadget = gadget;
- set_gadget_data (gadget, dev);
- gadget->ep0->driver_data = dev;
- /* two kinds of host-initiated state changes:
- * - iff DATA transfer is active, carrier is "on"
- * - tx queueing enabled if open *and* carrier is "on"
- */
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
-
- SET_NETDEV_DEV (dev->net, &gadget->dev);
- status = register_netdev (dev->net);
+ status = usb_add_config(cdev, &eth_config_driver);
if (status < 0)
- goto fail1;
-
- INFO (dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
- INFO (dev, "using %s, OUT %s IN %s%s%s\n", gadget->name,
- out_ep->name, in_ep->name,
- status_ep ? " STATUS " : "",
- status_ep ? status_ep->name : ""
- );
- INFO (dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- net->dev_addr [0], net->dev_addr [1],
- net->dev_addr [2], net->dev_addr [3],
- net->dev_addr [4], net->dev_addr [5]);
-
- if (cdc || rndis)
- INFO (dev, "HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- dev->host_mac [0], dev->host_mac [1],
- dev->host_mac [2], dev->host_mac [3],
- dev->host_mac [4], dev->host_mac [5]);
-
- if (rndis) {
- u32 vendorID = 0;
-
- /* FIXME RNDIS vendor id == "vendor NIC code" == ? */
-
- status = rndis_register(rndis_resp_avail, dev);
- if (status < 0) {
-fail0:
- unregister_netdev (dev->net);
- goto fail;
- }
- dev->rndis_config = status;
+ goto fail;
- /* these set up a lot of the OIDs that RNDIS needs */
- rndis_set_host_mac (dev->rndis_config, dev->host_mac);
- if (rndis_set_param_dev (dev->rndis_config, dev->net,
- &dev->cdc_filter))
- goto fail0;
- if (rndis_set_param_vendor(dev->rndis_config, vendorID,
- manufacturer))
- goto fail0;
- if (rndis_set_param_medium(dev->rndis_config,
- NDIS_MEDIUM_802_3, 0))
- goto fail0;
- INFO (dev, "RNDIS ready\n");
- }
+ INFO(cdev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC);
- return status;
+ return 0;
-fail1:
- dev_dbg(&gadget->dev, "register_netdev failed, %d\n", status);
fail:
- eth_unbind (gadget);
+ gether_cleanup();
return status;
}
-/*-------------------------------------------------------------------------*/
-
-static void
-eth_suspend (struct usb_gadget *gadget)
-{
- struct eth_dev *dev = get_gadget_data (gadget);
-
- DEBUG (dev, "suspend\n");
- dev->suspended = 1;
-}
-
-static void
-eth_resume (struct usb_gadget *gadget)
+static int __exit eth_unbind(struct usb_composite_dev *cdev)
{
- struct eth_dev *dev = get_gadget_data (gadget);
-
- DEBUG (dev, "resume\n");
- dev->suspended = 0;
+ gether_cleanup();
+ return 0;
}
-/*-------------------------------------------------------------------------*/
-
-static struct usb_gadget_driver eth_driver = {
- .speed = DEVSPEED,
-
- .function = (char *) driver_desc,
+static struct usb_composite_driver eth_driver = {
+ .name = "g_ether",
+ .dev = &device_desc,
+ .strings = dev_strings,
.bind = eth_bind,
- .unbind = eth_unbind,
-
- .setup = eth_setup,
- .disconnect = eth_disconnect,
-
- .suspend = eth_suspend,
- .resume = eth_resume,
-
- .driver = {
- .name = (char *) shortname,
- .owner = THIS_MODULE,
- },
+ .unbind = __exit_p(eth_unbind),
};
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_AUTHOR ("David Brownell, Benedikt Spanger");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(PREFIX DRIVER_DESC);
+MODULE_AUTHOR("David Brownell, Benedikt Spanger");
+MODULE_LICENSE("GPL");
-
-static int __init init (void)
+static int __init init(void)
{
- return usb_gadget_register_driver (&eth_driver);
+ return usb_composite_register(&eth_driver);
}
-module_init (init);
+module_init(init);
-static void __exit cleanup (void)
+static void __exit cleanup(void)
{
- usb_gadget_unregister_driver (&eth_driver);
+ usb_composite_unregister(&eth_driver);
}
-module_exit (cleanup);
-
+module_exit(cleanup);