[PATCH] USB: ohci uses driver model wakeup flags

This makes OHCI use the driver model wakeup control bits for its root hub
(e.g. disable on amd756, because of chip erratum) and for the controller
itself.  It no longer uses the hcd glue bits with those roles, and depends
on the previous patch making the root hub available earlier.

Note that on most platforms (boot code properly setting the RWC bit) this
gives a partial workaround for the way PCI isn't currently flagging devices
that support PME# signals.  (Because of odd PCI init sequencing on PPC.)
That's because many OHCI controllers support "legacy PCI PM" ... without
involving any PCI PM capability.

USB wakeup from STR, if it works on your system, may still involve
tweaking things by hand in /proc/acpi/wakeup.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 27 insertions, 22 deletions

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 2990be26900..544f7589912 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -443,11 +443,16 @@ ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
 static int ohci_init (struct ohci_hcd *ohci)
 {
 	int ret;
+	struct usb_hcd *hcd = ohci_to_hcd(ohci);
 
 	disable (ohci);
-	ohci->regs = ohci_to_hcd(ohci)->regs;
+	ohci->regs = hcd->regs;
 	ohci->next_statechange = jiffies;
 
+	/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
+	 * was never needed for most non-PCI systems ... remove the code?
+	 */
+
 #ifndef IR_DISABLE
 	/* SMM owns the HC?  not for long! */
 	if (!no_handshake && ohci_readl (ohci,
@@ -478,8 +483,10 @@ static int ohci_init (struct ohci_hcd *ohci)
 
 	/* Disable HC interrupts */
 	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	// flush the writes
-	(void) ohci_readl (ohci, &ohci->regs->control);
+
+	/* flush the writes, and save key bits like RWC */
+	if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
+		ohci->hc_control |= OHCI_CTRL_RWC;
 
 	/* Read the number of ports unless overridden */
 	if (ohci->num_ports == 0)
@@ -488,16 +495,19 @@ static int ohci_init (struct ohci_hcd *ohci)
 	if (ohci->hcca)
 		return 0;
 
-	ohci->hcca = dma_alloc_coherent (ohci_to_hcd(ohci)->self.controller,
+	ohci->hcca = dma_alloc_coherent (hcd->self.controller,
 			sizeof *ohci->hcca, &ohci->hcca_dma, 0);
 	if (!ohci->hcca)
 		return -ENOMEM;
 
 	if ((ret = ohci_mem_init (ohci)) < 0)
-		ohci_stop (ohci_to_hcd(ohci));
+		ohci_stop (hcd);
+	else {
+		register_reboot_notifier (&ohci->reboot_notifier);
+		create_debug_files (ohci);
+	}
 
 	return ret;
-
 }
 
 /*-------------------------------------------------------------------------*/
@@ -510,6 +520,7 @@ static int ohci_run (struct ohci_hcd *ohci)
 {
   	u32			mask, temp;
 	int			first = ohci->fminterval == 0;
+	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
 
 	disable (ohci);
 
@@ -525,18 +536,17 @@ static int ohci_run (struct ohci_hcd *ohci)
 		/* also: power/overcurrent flags in roothub.a */
 	}
 
-  	/* Reset USB nearly "by the book".  RemoteWakeupConnected
-	 * saved if boot firmware (BIOS/SMM/...) told us it's connected
-	 * (for OHCI integrated on mainboard, it normally is)
+  	/* Reset USB nearly "by the book".  RemoteWakeupConnected was
+	 * saved if boot firmware (BIOS/SMM/...) told us it's connected,
+	 * or if bus glue did the same (e.g. for PCI add-in cards with
+	 * PCI PM support).
 	 */
-	ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 	ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
 			hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
-			ohci->hc_control);
-
-	if (ohci->hc_control & OHCI_CTRL_RWC
-			&& !(ohci->flags & OHCI_QUIRK_AMD756))
-		ohci_to_hcd(ohci)->can_wakeup = 1;
+			ohci_readl (ohci, &ohci->regs->control));
+	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
+			&& !device_may_wakeup(hcd->self.controller))
+		device_init_wakeup(hcd->self.controller, 1);
 
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 	case OHCI_USB_OPER:
@@ -632,7 +642,7 @@ retry:
 	ohci->hc_control &= OHCI_CTRL_RWC;
  	ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
  	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
-	ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
+	hcd->state = HC_STATE_RUNNING;
 
 	/* wake on ConnectStatusChange, matching external hubs */
 	ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
@@ -667,15 +677,10 @@ retry:
 
 	// POTPGT delay is bits 24-31, in 2 ms units.
 	mdelay ((temp >> 23) & 0x1fe);
-	ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
+	hcd->state = HC_STATE_RUNNING;
 
 	ohci_dump (ohci, 1);
 
-	if (ohci_to_hcd(ohci)->self.root_hub == NULL) {
-		register_reboot_notifier (&ohci->reboot_notifier);
-		create_debug_files (ohci);
-	}
-
 	return 0;
 }