diff options
| author | Matt LaPlante <kernel1@cyberdogtech.com> | 2007-10-20 01:34:40 +0200 |
|---|---|---|
| committer | Adrian Bunk <bunk@kernel.org> | 2007-10-20 01:34:40 +0200 |
| commit | 01dd2fbf0da4019c380b6ca22a074538fb31db5a (patch) | |
| tree | 210291bd341c4450c8c51d8db890af0978f4035d /drivers/video | |
| parent | 0f035b8e8491f4ff87f6eec3e3f754d36b39d7a2 (diff) | |
typo fixes
Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.
Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Diffstat (limited to 'drivers/video')
| -rw-r--r-- | drivers/video/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/video/console/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/video/omap/Kconfig | 2 |
3 files changed, 5 insertions, 5 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index b3bf4ecc983..fb9d8d0b2c0 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -661,7 +661,7 @@ config FB_HECUBA help This enables support for the Hecuba board. This driver was tested with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO - interface (8 bit data, 4 bit control). If you anticpate using + interface (8 bit data, 4 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. @@ -815,7 +815,7 @@ config FB_XVR500 help This is the framebuffer device for the Sun XVR-500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver - only works on sparc64 systems where the system firwmare has + only works on sparc64 systems where the system firmware has mostly initialized the card already. It is treated as a completely dumb framebuffer device. @@ -828,7 +828,7 @@ config FB_XVR2500 help This is the framebuffer device for the Sun XVR-2500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver - only works on sparc64 systems where the system firwmare has + only works on sparc64 systems where the system firmware has mostly initialized the card already. It is treated as a completely dumb framebuffer device. diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index a22ccf9485a..267422f6625 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -27,7 +27,7 @@ config VGACON_SOFT_SCROLLBACK The scrollback buffer of the standard VGA console is located in the VGA RAM. The size of this RAM is fixed and is quite small. If you require a larger scrollback buffer, this can be placed in - System RAM which is dynamically allocated during intialization. + System RAM which is dynamically allocated during initialization. Placing the scrollback buffer in System RAM will slightly slow down the console. diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig index 7f4d25b8a18..f4fcf11b290 100644 --- a/drivers/video/omap/Kconfig +++ b/drivers/video/omap/Kconfig @@ -8,7 +8,7 @@ config FB_OMAP Frame buffer driver for OMAP based boards. config FB_OMAP_BOOTLOADER_INIT - bool "Check bootloader initializaion" + bool "Check bootloader initialization" depends on FB_OMAP help Say Y here if you want to enable checking if the bootloader has |