aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2009-03-23 16:43:59 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2009-04-03 14:54:27 -0700
commit5ca0121ff24d2efba208a0f6df2cb6e372170d1d (patch)
treee90a086ca42dd28ef653e2eeb9eb57689281cc57 /drivers
parent4e9bf410dc6006e95aba512272747bc8f30e7a20 (diff)
Staging: add USB serial Quatech driver
Add support for all Quatech usb to serial devices. Based on an original driver from Quatech. Cleaned up and forward ported by me. It's a mess, uses it's own tty layer interface, and the coding style is horrible. Cc: Tim Gobeli <tgobeli@quatech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/staging/Kconfig2
-rw-r--r--drivers/staging/Makefile1
-rw-r--r--drivers/staging/serqt_usb/Kconfig9
-rw-r--r--drivers/staging/serqt_usb/Makefile1
-rw-r--r--drivers/staging/serqt_usb/serqt_usb.c2983
5 files changed, 2996 insertions, 0 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 98dae044cbf..7ea9d918387 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -113,5 +113,7 @@ source "drivers/staging/heci/Kconfig"
source "drivers/staging/line6/Kconfig"
+source "drivers/staging/serqt_usb/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 2a859ee036d..47dfd5b4288 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -39,3 +39,4 @@ obj-$(CONFIG_IDE_PHISON) += phison/
obj-$(CONFIG_PLAN9AUTH) += p9auth/
obj-$(CONFIG_HECI) += heci/
obj-$(CONFIG_LINE6_USB) += line6/
+obj-$(CONFIG_USB_SERIAL_QUATECH_ESU100) += serqt_usb/
diff --git a/drivers/staging/serqt_usb/Kconfig b/drivers/staging/serqt_usb/Kconfig
new file mode 100644
index 00000000000..cc1af5df40d
--- /dev/null
+++ b/drivers/staging/serqt_usb/Kconfig
@@ -0,0 +1,9 @@
+config USB_SERIAL_QUATECH_ESU100
+ tristate "USB Quatech ESU-100 8 Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use the Quatech ESU-100 8 port usb to
+ serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called serqt_usb.
diff --git a/drivers/staging/serqt_usb/Makefile b/drivers/staging/serqt_usb/Makefile
new file mode 100644
index 00000000000..4fd1da275e8
--- /dev/null
+++ b/drivers/staging/serqt_usb/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_USB_SERIAL_QUATECH_ESU100) += serqt_usb.o
diff --git a/drivers/staging/serqt_usb/serqt_usb.c b/drivers/staging/serqt_usb/serqt_usb.c
new file mode 100644
index 00000000000..7ababa0dfa7
--- /dev/null
+++ b/drivers/staging/serqt_usb/serqt_usb.c
@@ -0,0 +1,2983 @@
+/*
+ * This code was developed for the Quatech USB line for linux, it used
+ * much of the code developed by Greg Kroah-Hartman for USB serial devices
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/version.h>
+
+#include <asm/uaccess.h>
+
+/* Use our own dbg macro */
+//#define DEBUG_ON
+//#undef dbg
+#ifdef DEBUG_ON
+ #define mydbg(const...) printk(const)
+#else
+ #define mydbg(const...)
+#endif
+
+
+/* parity check flag */
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+
+#define SERIAL_TTY_MAJOR 0 /* Nice legal number now */
+#define SERIAL_TTY_MINORS 255 /* loads of devices :) */
+#define MAX_NUM_PORTS 8 /* The maximum number of ports one device can grab at once */
+#define PREFUFF_LEVEL_CONSERVATIVE 128
+#define ATC_DISABLED 0x00
+
+#define RR_BITS 0x03 //for clearing clock bits
+#define DUPMODE_BITS 0xc0
+
+#define RS232_MODE 0x00
+#define RTSCTS_TO_CONNECTOR 0x40
+#define CLKS_X4 0x02 ///
+
+#define LOOPMODE_BITS 0x41 //LOOP1 = b6, LOOP0 = b0 (PORT B)
+#define ALL_LOOPBACK 0x01
+#define MODEM_CTRL 0x40
+
+
+#define THISCHAR data[i]
+#define NEXTCHAR data[i + 1]
+#define THIRDCHAR data[i + 2]
+#define FOURTHCHAR data[i + 3]
+
+//*************************************************
+// Useful defintions for port A, Port B and Port C
+#define FULLPWRBIT 0x00000080
+#define NEXT_BOARD_POWER_BIT 0x00000004
+
+
+#define SERIAL_LSR_OE 0x02
+#define SERIAL_LSR_PE 0x04
+#define SERIAL_LSR_FE 0x08
+#define SERIAL_LSR_BI 0x10
+
+#define SERIAL_LSR_TEMT 0x40
+
+#define DIV_LATCH_LS 0x00
+#define XMT_HOLD_REGISTER 0x00
+#define XVR_BUFFER_REGISTER 0x00
+#define DIV_LATCH_MS 0x01
+#define FIFO_CONTROL_REGISTER 0x02
+#define LINE_CONTROL_REGISTER 0x03
+#define MODEM_CONTROL_REGISTER 0x04
+#define LINE_STATUS_REGISTER 0x05
+#define MODEM_STATUS_REGISTER 0x06
+
+
+#define SERIAL_MCR_DTR 0x01
+#define SERIAL_MCR_RTS 0x02
+#define SERIAL_MCR_LOOP 0x10
+
+#define SERIAL_MSR_CTS 0x10
+#define SERIAL_MSR_CD 0x80
+#define SERIAL_MSR_RI 0x40
+#define SERIAL_MSR_DSR 0x20
+#define SERIAL_MSR_MASK 0xf0
+
+#define SERIAL_8_DATA 0x03
+#define SERIAL_7_DATA 0x02
+#define SERIAL_6_DATA 0x01
+#define SERIAL_5_DATA 0x00
+
+#define SERIAL_ODD_PARITY 0X08
+#define SERIAL_EVEN_PARITY 0X18
+#define SERIAL_TWO_STOPB 0x04
+#define SERIAL_ONE_STOPB 0x00
+
+#define MAX_BAUD_RATE 460800
+#define MAX_BAUD_REMAINDER 4608
+
+
+#define QT_SET_GET_DEVICE 0xc2
+#define QT_OPEN_CLOSE_CHANNEL 0xca
+#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
+#define QT_SET_ATF 0xcd
+#define QT_GET_SET_REGISTER 0xc0
+#define QT_GET_SET_UART 0xc1
+#define QT_HW_FLOW_CONTROL_MASK 0xc5
+#define QT_SW_FLOW_CONTROL_MASK 0xc6
+#define QT_SW_FLOW_CONTROL_DISABLE 0xc7
+#define QT_BREAK_CONTROL 0xc8
+
+#define SERIALQT_PCI_IOC_MAGIC 'k'
+#define SERIALQT_WRITE_QOPR _IOW(SERIALQT_PCI_IOC_MAGIC, 0, int)
+#define SERIALQT_WRITE_QMCR _IOW(SERIALQT_PCI_IOC_MAGIC, 1, int)
+#define SERIALQT_GET_NUMOF_UNITS _IOR(SERIALQT_PCI_IOC_MAGIC, 2, void *)
+#define SERIALQT_GET_THIS_UNIT _IOR(SERIALQT_PCI_IOC_MAGIC, 3, void *)
+#define SERIALQT_READ_QOPR _IOR(SERIALQT_PCI_IOC_MAGIC, 4, int)
+#define SERIALQT_READ_QMCR _IOR(SERIALQT_PCI_IOC_MAGIC, 5, int)
+#define SERIALQT_IS422_EXTENDED _IOR(SERIALQT_PCI_IOC_MAGIC, 6, int) //returns successful if 422 extended
+
+
+#define USBD_TRANSFER_DIRECTION_IN 0xc0
+#define USBD_TRANSFER_DIRECTION_OUT 0x40
+
+#define ATC_DISABLED 0x00
+#define ATC_RTS_ENABLED 0x02
+#define ATC_DTR_ENABLED 0x01
+
+#define RR_BITS 0x03 //for clearing clock bits
+#define DUPMODE_BITS 0xc0
+
+#define FULL_DUPLEX 0x00
+#define HALF_DUPLEX_RTS 0x40
+#define HALF_DUPLEX_DTR 0x80
+
+#define QMCR_FULL_DUPLEX 0x00
+#define QMCR_HALF_DUPLEX_RTS 0x02
+#define QMCR_HALF_DUPLEX_DTR 0x01
+#define QMCR_HALF_DUPLEX_MASK 0x03
+#define QMCR_CONNECTOR_MASK 0x1C
+
+#define QMCR_RX_EN_MASK 0x20
+
+#define QMCR_ALL_LOOPBACK 0x10
+#define QMCR_MODEM_CONTROL 0X00
+
+
+
+#define SERIALQT_IOC_MAXNR 6
+
+struct usb_serial_port {
+ struct usb_serial *serial; /* pointer back to the owner of this port */
+ struct tty_struct * tty; /* the coresponding tty for this port */
+ unsigned char number;
+ char active; /* someone has this device open */
+
+ unsigned char * interrupt_in_buffer;
+ struct urb * interrupt_in_urb;
+ __u8 interrupt_in_endpointAddress;
+
+ unsigned char * bulk_in_buffer;
+ unsigned char * xfer_to_tty_buffer;
+ struct urb * read_urb;
+ __u8 bulk_in_endpointAddress;
+
+ unsigned char * bulk_out_buffer;
+ int bulk_out_size;
+ struct urb * write_urb;
+ __u8 bulk_out_endpointAddress;
+
+ wait_queue_head_t write_wait;
+ wait_queue_head_t wait;
+ struct work_struct work;
+
+ int open_count; /* number of times this port has been opened */
+ struct semaphore sem; /* locks this structure */
+
+ __u8 shadowLCR; /* last LCR value received */
+ __u8 shadowMCR; /* last MCR value received */
+ __u8 shadowMSR; /* last MSR value received */
+ __u8 shadowLSR; /* last LSR value received */
+ int RxHolding;
+ char closePending;
+ int ReadBulkStopped;
+
+ void * private; /* data private to the specific port */
+};
+
+struct identity {
+ int index;
+ int n_identity;
+};
+
+struct usb_serial {
+ struct usb_device * dev;
+ struct usb_interface * interface; /* the interface for this device */
+ struct tty_driver * tty_driver; /* the tty_driver for this device */
+ unsigned char minor; /* the starting minor number for this device */
+ unsigned char num_ports; /* the number of ports this device has */
+ char num_interrupt_in; /* number of interrupt in endpoints we have */
+ char num_bulk_in; /* number of bulk in endpoints we have */
+ char num_bulk_out; /* number of bulk out endpoints we have */
+ unsigned char num_OpenCount; /* the number of ports this device has */
+
+
+ __u16 vendor; /* vendor id of this device */
+ __u16 product; /* product id of this device */
+ struct usb_serial_port port[MAX_NUM_PORTS];
+
+ void * private; /* data private to the specific driver */
+};
+
+
+
+static inline int port_paranoia_check (struct usb_serial_port *port, const char *function)
+{
+ if (!port) {
+ dbg("%s - port == NULL", function);
+ return -1;
+ }
+ if (!port->serial) {
+ dbg("%s - port->serial == NULL\n", function);
+ return -1;
+ }
+ if (!port->tty) {
+ dbg("%s - port->tty == NULL\n", function);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+/* Inline functions to check the sanity of a pointer that is passed to us */
+static inline int serial_paranoia_check (struct usb_serial *serial, const char *function)
+{
+ if (!serial) {
+ dbg("%s - serial == NULL\n", function);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+static inline struct usb_serial* get_usb_serial (struct usb_serial_port *port, const char *function)
+{
+ /* if no port was specified, or it fails a paranoia check */
+ if (!port ||
+ port_paranoia_check (port, function) ||
+ serial_paranoia_check (port->serial, function)) {
+ /* then say that we dont have a valid usb_serial thing, which will
+ * end up genrating -ENODEV return values */
+ return NULL;
+ }
+
+ return port->serial;
+}
+
+
+struct qt_get_device_data
+{
+ __u8 porta;
+ __u8 portb;
+ __u8 portc;
+};
+
+struct qt_open_channel_data
+{
+ __u8 line_status;
+ __u8 modem_status;
+};
+
+static void ProcessLineStatus(struct usb_serial_port *port, unsigned char line_status);
+static void ProcessModemStatus(struct usb_serial_port *port, unsigned char modem_status);
+static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data);
+static struct usb_serial *get_free_serial (int num_ports, int *minor);
+
+
+static int serqt_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
+
+static void serqt_usb_disconnect(struct usb_interface *interface);
+static int box_set_device(struct usb_serial *serial, struct qt_get_device_data *pDeviceData);
+static int box_get_device(struct usb_serial *serial, struct qt_get_device_data *pDeviceData);
+static int serial_open (struct tty_struct *tty, struct file * filp);
+static void serial_close(struct tty_struct *tty, struct file * filp);
+static int serial_write_room (struct tty_struct *tty);
+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void serial_set_termios (struct tty_struct *tty, struct ktermios * old);
+static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count);
+
+static void serial_throttle (struct tty_struct * tty);
+static void serial_unthrottle (struct tty_struct * tty);
+static int serial_break (struct tty_struct *tty, int break_state);
+static int serial_chars_in_buffer (struct tty_struct *tty);
+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data);
+
+static int qt_open (struct usb_serial_port *port, struct file *filp);
+static int BoxSetPrebufferLevel(struct usb_serial *serial);
+
+static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode);
+static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number, unsigned short default_divisor, unsigned char default_LCR );
+
+
+static int BoxOPenCloseChannel(struct usb_serial *serial, __u16 Uart_Number, __u16 OpenClose, struct qt_open_channel_data *pDeviceData);
+static void qt_close (struct usb_serial_port *port, struct file * filp);
+static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,unsigned short Register_Num, __u8 *pValue);
+static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number, unsigned short Register_Num, unsigned short Value );
+static void qt_write_bulk_callback(struct urb *urb);
+static int qt_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
+static void port_softint(struct work_struct *work);
+static int qt_write_room (struct usb_serial_port *port);
+static int qt_chars_in_buffer (struct usb_serial_port *port);
+static int qt_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
+static void qt_set_termios(struct usb_serial_port *port, struct ktermios *old_termios);
+static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int UartNumber, int bSet);
+static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber);
+static int EmulateWriteQMCR_Reg(int index, unsigned uc_value);
+static int EmulateReadQMCR_Reg(int index, unsigned *uc_value);
+static struct usb_serial *find_the_box(unsigned int index);
+int ioctl_serial_usb (struct inode *innod, struct file *filp, unsigned int cmd, unsigned long arg);
+
+
+static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 Uart, unsigned char stop_char, unsigned char start_char);
+static void qt_read_bulk_callback(struct urb *urb);
+
+static void port_sofrint(void *private);
+
+static void return_serial(struct usb_serial *serial);
+
+
+static int serial_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
+static int serial_tiocmget(struct tty_struct *tty, struct file *file);
+
+
+
+static int qt_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int value);
+
+static int qt_tiocmget(struct usb_serial_port *port, struct file * file);
+
+
+
+/* Version Information */
+#define DRIVER_VERSION "v2.14"
+#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc"
+#define DRIVER_DESC "Quatech USB to Serial Driver"
+
+#define USB_VENDOR_ID_QUATECH 0x061d // Quatech VID
+#define DEVICE_ID_QUATECH_RS232_SINGLE_PORT 0xC020 //SSU100
+#define DEVICE_ID_QUATECH_RS422_SINGLE_PORT 0xC030 //SSU200
+#define DEVICE_ID_QUATECH_RS232_DUAL_PORT 0xC040 //DSU100
+#define DEVICE_ID_QUATECH_RS422_DUAL_PORT 0xC050 //DSU200
+#define DEVICE_ID_QUATECH_RS232_FOUR_PORT 0xC060 //QSU100
+#define DEVICE_ID_QUATECH_RS422_FOUR_PORT 0xC070 //QSU200
+#define DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A 0xC080 //ESU100A
+#define DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B 0xC081 //ESU100B
+#define DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A 0xC0A0 //ESU200A
+#define DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B 0xC0A1 //ESU200B
+#define DEVICE_ID_QUATECH_RS232_16_PORT_A 0xC090 //HSU100A
+#define DEVICE_ID_QUATECH_RS232_16_PORT_B 0xC091 //HSU100B
+#define DEVICE_ID_QUATECH_RS232_16_PORT_C 0xC092 //HSU100C
+#define DEVICE_ID_QUATECH_RS232_16_PORT_D 0xC093 //HSU100D
+#define DEVICE_ID_QUATECH_RS422_16_PORT_A 0xC0B0 //HSU200A
+#define DEVICE_ID_QUATECH_RS422_16_PORT_B 0xC0B1 //HSU200B
+#define DEVICE_ID_QUATECH_RS422_16_PORT_C 0xC0B2 //HSU200C
+#define DEVICE_ID_QUATECH_RS422_16_PORT_D 0xC0B3 //HSU200D
+
+
+/* table of Quatech devices */
+static struct usb_device_id serqt_table [] = {
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_SINGLE_PORT)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_SINGLE_PORT)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_DUAL_PORT)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_DUAL_PORT)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_FOUR_PORT)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_FOUR_PORT)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_A)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_B)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_C)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS232_16_PORT_D)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_A)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_B)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_C)},
+ { USB_DEVICE(USB_VENDOR_ID_QUATECH, DEVICE_ID_QUATECH_RS422_16_PORT_D)},
+ {} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, serqt_table);
+
+static int major_number;
+static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
+
+
+/* table of Quatech 422devices */
+static unsigned int serqt_422_table[] = {
+ DEVICE_ID_QUATECH_RS422_SINGLE_PORT,
+ DEVICE_ID_QUATECH_RS422_DUAL_PORT,
+ DEVICE_ID_QUATECH_RS422_FOUR_PORT,
+ DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A,
+ DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B,
+ DEVICE_ID_QUATECH_RS422_16_PORT_A,
+ DEVICE_ID_QUATECH_RS422_16_PORT_B,
+ DEVICE_ID_QUATECH_RS422_16_PORT_C,
+ DEVICE_ID_QUATECH_RS422_16_PORT_D,
+ 0 /* terminate with zero */
+};
+
+
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver serqt_usb_driver = {
+ .name = "quatech-usb-serial",
+ .probe = serqt_probe,
+ .disconnect = serqt_usb_disconnect,
+ .id_table = serqt_table,
+};
+
+static struct ktermios *serial_termios[SERIAL_TTY_MINORS];
+static struct ktermios *serial_termios_locked[SERIAL_TTY_MINORS];
+
+static const struct tty_operations serial_ops = {
+ .open = serial_open,
+ .close = serial_close,
+ .write = serial_write,
+ .write_room = serial_write_room,
+ .ioctl = serial_ioctl,
+ .set_termios = serial_set_termios,
+ .throttle = serial_throttle,
+ .unthrottle = serial_unthrottle,
+ .break_ctl = serial_break,
+ .chars_in_buffer = serial_chars_in_buffer,
+ .read_proc = serial_read_proc,
+ .tiocmset = serial_tiocmset,
+ .tiocmget = serial_tiocmget,
+};
+
+static struct tty_driver serial_tty_driver = {
+ .magic = TTY_DRIVER_MAGIC,
+ .driver_name = "Quatech usb-serial",
+ .name = "ttyQT_USB",
+ .major = SERIAL_TTY_MAJOR,
+ .minor_start = 0,
+ .num = SERIAL_TTY_MINORS,
+ .type = TTY_DRIVER_TYPE_SERIAL,
+ .subtype = SERIAL_TYPE_NORMAL,
+ .flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV,
+
+ .termios = serial_termios,
+ .termios_locked = serial_termios_locked,
+ .init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL,
+
+ .init_termios.c_iflag = ICRNL | IXON,
+ .init_termios.c_oflag = OPOST,
+
+ .init_termios.c_lflag= ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHOCTL | ECHOKE | IEXTEN,
+};
+
+//fops for parent device
+static struct file_operations serialqt_usb_fops = {
+ .ioctl = ioctl_serial_usb,
+
+};
+
+
+ /**
+ * serqt_probe
+ *
+ * Called by the usb core when a new device is connected that it thinks
+ * this driver might be interested in.
+ *
+ */
+static int serqt_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(interface);
+ struct usb_serial *serial = NULL;
+ struct usb_serial_port *port;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
+ struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
+ struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
+ int minor;
+ int buffer_size;
+ int i;
+ struct usb_host_interface *iface_desc;
+ int num_interrupt_in = 0;
+ int num_bulk_in = 0;
+ int num_bulk_out = 0;
+ int num_ports;
+ struct qt_get_device_data DeviceData;
+ int status;
+
+ mydbg("In %s\n", __FUNCTION__);
+
+ /* let's find the endpoints needed */
+ /* check out the endpoints */
+ iface_desc = interface->cur_altsetting;;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
+ {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ if ((endpoint->bEndpointAddress & 0x80) &&
+ ((endpoint->bmAttributes & 3) == 0x02))
+ {
+ /* we found a bulk in endpoint */
+ mydbg("found bulk in");
+ bulk_in_endpoint[num_bulk_in] = endpoint;
+ ++num_bulk_in;
+ }
+
+ if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
+ ((endpoint->bmAttributes & 3) == 0x02))
+ {
+ /* we found a bulk out endpoint */
+ mydbg("found bulk out\n");
+ bulk_out_endpoint[num_bulk_out] = endpoint;
+ ++num_bulk_out;
+ }
+
+ if ((endpoint->bEndpointAddress & 0x80) &&
+ ((endpoint->bmAttributes & 3) == 0x03))
+ {
+ /* we found a interrupt in endpoint */
+ mydbg("found interrupt in\n");
+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
+ ++num_interrupt_in;
+ }
+ }
+
+ /* found all that we need */
+ dev_info(&interface->dev, "Quatech converter detected\n");
+ num_ports = num_bulk_out;
+ if (num_ports == 0)
+ {
+ err("Quatech device with no bulk out, not allowed.");
+ return -ENODEV;
+
+ }
+
+ serial = get_free_serial (num_ports, &minor);
+ if (serial == NULL)
+ {
+ err("No more free serial devices");
+ return -ENODEV;
+ }
+
+ serial->dev = dev;
+ serial->interface = interface;
+ serial->minor = minor;
+ serial->num_ports = num_ports;
+ serial->num_bulk_in = num_bulk_in;
+ serial->num_bulk_out = num_bulk_out;
+ serial->num_interrupt_in = num_interrupt_in;
+ serial->vendor = dev->descriptor.idVendor;
+ serial->product = dev->descriptor.idProduct;
+
+
+ /* set up the endpoint information */
+ for (i = 0; i < num_bulk_in; ++i)
+ {
+ endpoint = bulk_in_endpoint[i];
+ port = &serial->port[i];
+ port->read_urb = usb_alloc_urb (0, GFP_KERNEL);
+ if (!port->read_urb)
+ {
+ err("No free urbs available");
+ goto probe_error;
+ }
+ buffer_size = endpoint->wMaxPacketSize;
+ port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
+ port->xfer_to_tty_buffer = kmalloc (buffer_size, GFP_KERNEL);
+ if (!port->bulk_in_buffer)
+ {
+ err("Couldn't allocate bulk_in_buffer");
+ goto probe_error;
+ }
+ usb_fill_bulk_urb (port->read_urb, dev,
+ usb_rcvbulkpipe (dev,
+ endpoint->bEndpointAddress),
+ port->bulk_in_buffer, buffer_size,
+ qt_read_bulk_callback,
+ port);
+ }
+
+ for (i = 0; i < num_bulk_out; ++i)
+ {
+ endpoint = bulk_out_endpoint[i];
+ port = &serial->port[i];
+ port->write_urb = usb_alloc_urb (0, GFP_KERNEL);
+ if (!port->write_urb)
+ {
+ err("No free urbs available");
+ goto probe_error;
+ }
+ buffer_size = endpoint->wMaxPacketSize;
+ port->bulk_out_size = buffer_size;
+ port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
+ port->bulk_out_buffer = kmalloc (buffer_size, GFP_KERNEL);
+ if (!port->bulk_out_buffer)
+ {
+ err("Couldn't allocate bulk_out_buffer");
+ goto probe_error;
+ }
+ usb_fill_bulk_urb (port->write_urb, dev,
+ usb_sndbulkpipe (dev,
+ endpoint->bEndpointAddress),
+ port->bulk_out_buffer, buffer_size,
+ qt_write_bulk_callback,
+ port);
+
+
+ }
+
+ //For us numb of bulkin or out = number of ports
+
+ mydbg("%s - setting up %d port structures for this device\n", __FUNCTION__, num_bulk_in);
+ for (i = 0; i < num_bulk_in; ++i)
+ {
+ port = &serial->port[i];
+ port->number = i + serial->minor;
+ port->serial = serial;
+
+ INIT_WORK(&port->work, port_softint);
+
+ init_MUTEX (&port->sem);
+
+
+
+ }
+ status = box_get_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_get_device failed");
+ goto probe_error;
+ }
+
+ mydbg(__FILE__"DeviceData.portb = 0x%x",DeviceData.portb);
+
+ DeviceData.portb &= ~FULLPWRBIT;
+ mydbg(__FILE__"Changing DeviceData.portb to 0x%x",DeviceData.portb);
+
+ status = box_set_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_set_device failed\n");
+ goto probe_error;
+ }
+
+
+
+ /* initialize the devfs nodes for this device and let the user know what ports we are bound to */
+ for (i = 0; i < serial->num_ports; ++i)
+ {
+ dev_info(&interface->dev, "Converter now attached to ttyUSB%d (or usb/tts/%d for devfs)",
+ serial->port[i].number, serial->port[i].number);
+ }
+
+ //usb_serial_console_init (debug, minor);
+
+ ///***********TAG add start next board here ****///
+ status = box_get_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_get_device failed");
+ goto probe_error;
+ }
+
+ //*****************and before we power up lets initialiaze parnent device stuff here before
+ //*****************we set thmem via any other method such as the property pages
+ switch (serial->product)
+ {
+ case DEVICE_ID_QUATECH_RS232_SINGLE_PORT:
+ case DEVICE_ID_QUATECH_RS232_DUAL_PORT:
+ case DEVICE_ID_QUATECH_RS232_FOUR_PORT:
+ case DEVICE_ID_QUATECH_RS232_EIGHT_PORT_A:
+ case DEVICE_ID_QUATECH_RS232_EIGHT_PORT_B:
+ case DEVICE_ID_QUATECH_RS232_16_PORT_A:
+ case DEVICE_ID_QUATECH_RS232_16_PORT_B:
+ case DEVICE_ID_QUATECH_RS232_16_PORT_C:
+ case DEVICE_ID_QUATECH_RS232_16_PORT_D:
+ DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
+ DeviceData.porta |= CLKS_X4;
+ DeviceData.portb &= ~(LOOPMODE_BITS);
+ DeviceData.portb |= RS232_MODE;
+ break;
+
+
+ case DEVICE_ID_QUATECH_RS422_SINGLE_PORT:
+ case DEVICE_ID_QUATECH_RS422_DUAL_PORT:
+ case DEVICE_ID_QUATECH_RS422_FOUR_PORT:
+ case DEVICE_ID_QUATECH_RS422_EIGHT_PORT_A:
+ case DEVICE_ID_QUATECH_RS422_EIGHT_PORT_B:
+ case DEVICE_ID_QUATECH_RS422_16_PORT_A:
+ case DEVICE_ID_QUATECH_RS422_16_PORT_B:
+ case DEVICE_ID_QUATECH_RS422_16_PORT_C:
+ case DEVICE_ID_QUATECH_RS422_16_PORT_D:
+ DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
+ DeviceData.porta |= CLKS_X4;
+ DeviceData.portb &= ~(LOOPMODE_BITS);
+ DeviceData.portb |= ALL_LOOPBACK;
+ break;
+ default:
+ DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS);
+ DeviceData.porta |= CLKS_X4;
+ DeviceData.portb &= ~(LOOPMODE_BITS);
+ DeviceData.portb |= RS232_MODE;
+ break;
+
+ }
+ status = BoxSetPrebufferLevel(serial); //sets to default vaue
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetPrebufferLevel failed\n");
+ goto probe_error;
+ }
+
+ status = BoxSetATC(serial, ATC_DISABLED);
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetATC failed\n");
+ goto probe_error;
+ }
+ //****************************************************************************
+ mydbg(__FILE__"DeviceData.portb = 0x%x",DeviceData.portb);
+
+ DeviceData.portb |= NEXT_BOARD_POWER_BIT;
+ mydbg(__FILE__"Changing DeviceData.portb to 0x%x",DeviceData.portb);
+
+ status = box_set_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_set_device failed\n");
+ goto probe_error;
+ }
+
+
+ mydbg("Exit Success %s\n", __FUNCTION__);
+
+ usb_set_intfdata (interface, serial);
+ return 0;
+
+
+
+ probe_error:
+
+ for (i = 0; i < num_bulk_in; ++i)
+ {
+ port = &serial->port[i];
+ if (port->read_urb)
+ usb_free_urb (port->read_urb);
+ if (port->bulk_in_buffer)
+ kfree (port->bulk_in_buffer);
+ }
+ for (i = 0; i < num_bulk_out; ++i)
+ {
+ port = &serial->port[i];
+ if (port->write_urb)
+ usb_free_urb (port->write_urb);
+ if (port->bulk_out_buffer)
+ kfree (port->bulk_out_buffer);
+
+ if (port->xfer_to_tty_buffer)
+ kfree (port->xfer_to_tty_buffer);
+ }
+ for (i = 0; i < num_interrupt_in; ++i)
+ {
+ port = &serial->port[i];
+ if (port->interrupt_in_urb)
+ usb_free_urb (port->interrupt_in_urb);
+ if (port->interrupt_in_buffer)
+ kfree (port->interrupt_in_buffer);
+ }
+
+
+ /* return the minor range that this device had */
+ return_serial (serial);
+ mydbg("Exit fail %s\n", __FUNCTION__);
+
+ /* free up any memory that we allocated */
+ kfree (serial);
+ return -EIO;
+}
+
+
+
+
+
+
+//returns the serial_table array pointers that are taken
+//up in consecutive positions for each port to a common usb_serial structure
+//back to NULL
+static void return_serial(struct usb_serial *serial)
+{
+ int i;
+
+ mydbg("%s\n", __FUNCTION__);
+
+ if (serial == NULL)
+ return;
+
+ for (i = 0; i < serial->num_ports; ++i)
+ {
+ serial_table[serial->minor + i] = NULL;
+ }
+
+ return;
+}
+
+//Finds the first locatio int the serial_table array where it can fit
+//num_ports number of consecutive points to a common usb_serial structure
+//,allocates a stucture points to it in all the structures, and returns the index
+//to the first location in the array in the "minor" variable.
+
+static struct usb_serial *get_free_serial (int num_ports, int *minor)
+{
+ struct usb_serial *serial = NULL;
+ int i, j;
+ int good_spot;
+
+ mydbg("%s %d\n", __FUNCTION__, num_ports);
+
+ *minor = 0;
+ for (i = 0; i < SERIAL_TTY_MINORS; ++i)
+ {
+ if (serial_table[i])
+ continue;
+
+ good_spot = 1;
+ //find a spot in the array where you can fit consecutive positions
+ //to put the pointers to the usb_serail allocated structure for all
+ //the minor numbers (ie. ports)
+ for (j = 1; j <= num_ports-1; ++j)
+ if (serial_table[i+j])
+ good_spot = 0;
+ if (good_spot == 0)
+ continue;
+
+ if (!(serial = kmalloc(sizeof(struct usb_serial), GFP_KERNEL)))
+ {
+ err("%s - Out of memory", __FUNCTION__);
+ return NULL;
+ }
+ memset(serial, 0, sizeof(struct usb_serial));
+ serial_table[i] = serial;
+ *minor = i;
+ mydbg("%s - minor base = %d\n", __FUNCTION__, *minor);
+ //copy in the pointer into the array starting a the *minor position
+ //*minor is the index into the array
+ for (i = *minor+1; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
+ serial_table[i] = serial;
+ return serial;
+ }
+ return NULL;
+}
+
+static int flip_that( struct tty_struct *tty, __u16 UartNumber, struct usb_serial *serial)
+{
+ tty_flip_buffer_push(tty);
+ tty_schedule_flip(tty);
+ return 0;
+}
+
+//Handles processing and moving data to the tty layer
+static void port_sofrint(void *private)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *)private;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ struct tty_struct *tty = port->tty;
+ unsigned char *data = port->read_urb->transfer_buffer;
+ unsigned int UartNumber;
+ struct urb *urb = port->read_urb;
+ unsigned int RxCount = urb->actual_length;
+ int i, result;
+ int flag, flag_data;
+
+ //UartNumber = MINOR(port->tty->device) - serial->minor;
+ UartNumber = tty->index - serial->minor;
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+ mydbg ("%s - port->RxHolding = %d\n", __FUNCTION__, port->RxHolding);
+
+ if (port_paranoia_check (port, __FUNCTION__) != 0) {
+ mydbg("%s - port_paranoia_check, exiting\n", __FUNCTION__);
+ port->ReadBulkStopped = 1;
+ return;
+ }
+
+ if (!serial) {
+ mydbg("%s - bad serial pointer, exiting\n", __FUNCTION__);
+ return;
+ }
+ if (port->closePending == 1) //Were closing , stop reading
+ {
+ mydbg("%s - (port->closepending == 1\n", __FUNCTION__);
+ port->ReadBulkStopped = 1;
+ return;
+ }
+
+ //RxHolding is asserted by throttle, if we assert it, we're not receiving any more
+ //characters and let the box handle the flow control
+ if (port->RxHolding == 1) {
+ port->ReadBulkStopped = 1;
+ return;
+ }
+
+ if (urb->status) {
+ port->ReadBulkStopped = 1;
+
+ mydbg("%s - nonzero read bulk status received: %d\n", __FUNCTION__, urb->status);
+ return;
+ }
+
+
+ tty = port->tty;
+ mydbg("%s - port %d, tty =0x%p\n", __FUNCTION__, port->number, tty);
+
+
+ if (tty && RxCount) {
+ flag_data = 0;
+ for (i = 0; i < RxCount ; ++i) {
+ //Look ahead code here
+
+ if ((i <= (RxCount - 3)) && (THISCHAR == 0x1b) && (NEXTCHAR == 0x1b)) {
+ flag = 0;
+ switch (THIRDCHAR) {
+ case 0x00:
+ //Line status change 4th byte must follow
+ if (i > (RxCount - 4)) {
+ mydbg("Illegal escape sequences in received data\n");
+ break;
+ }
+ ProcessLineStatus(port, FOURTHCHAR);
+ i += 3;
+ flag = 1;
+ break;
+
+ case 0x01:
+ //Modem status status change 4th byte must follow
+ mydbg("Modem status status. \n");
+
+ if (i > (RxCount - 4)) {
+ mydbg("Illegal escape sequences in received data\n");
+ break;
+ }
+ ProcessModemStatus(port, FOURTHCHAR);
+ i += 3;
+ flag = 1;
+ break;
+ case 0xff:
+ mydbg("No status sequence. \n");
+
+ ProcessRxChar(port, THISCHAR);
+ ProcessRxChar(port, NEXTCHAR);
+ i += 2;
+ break;
+
+ }//end switch
+ if (flag == 1)
+ continue;
+ } //endif
+
+ if(tty && urb->actual_length) {
+ tty_buffer_request_room(tty, 1);
+ tty_insert_flip_string(tty, (data + i), 1);
+ }
+
+
+ }//endfor
+
+ tty_flip_buffer_push(tty);
+
+ }//endif
+
+ /* Continue trying to always read */
+ usb_fill_bulk_urb (port->read_urb, serial->dev,
+ usb_rcvbulkpipe (serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ qt_read_bulk_callback, port);
+ result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ if (result)
+ mydbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+ else
+ {
+ if (tty && RxCount)
+ flip_that(tty, UartNumber, serial);
+ }
+
+
+ return;
+
+ }
+
+
+
+static void qt_read_bulk_callback(struct urb *urb)
+{
+
+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+
+
+ if (urb->status)
+ {
+
+ port->ReadBulkStopped = 1;
+ mydbg("%s - nonzero write bulk status received: %d\n", __FUNCTION__, urb->status);
+ return;
+ }
+
+ port_sofrint((void *) port);
+ schedule_work(&port->work);
+}
+
+
+static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data){
+ struct tty_struct *tty;
+ struct urb *urb = port->read_urb;
+ tty = port->tty;
+ /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
+
+ if(tty && urb->actual_length)
+ {
+ tty_buffer_request_room(tty, 1);
+ tty_insert_flip_string(tty, &Data, 1);
+ //tty_flip_buffer_push(tty);
+
+
+ }
+
+ return;
+}
+
+static void ProcessLineStatus(struct usb_serial_port *port, unsigned char line_status){
+
+ port->shadowLSR = line_status & (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE |
+ SERIAL_LSR_BI);
+ return;
+}
+
+
+static void ProcessModemStatus(struct usb_serial_port *port, unsigned char modem_status){
+
+ port->shadowMSR = modem_status;
+ wake_up_interruptible(&port->wait);
+ return;
+}
+
+
+
+
+
+
+static void serqt_usb_disconnect(struct usb_interface *interface){
+ struct usb_serial *serial = usb_get_intfdata (interface);
+ //struct device *dev = &interface->dev;
+ struct usb_serial_port *port;
+ int i;
+
+ mydbg ("%s\n", __FUNCTION__);
+ if (serial)
+ {
+
+ serial->dev = NULL;
+
+ for (i = 0; i < serial->num_ports; ++i)
+ serial->port[i].open_count = 0;
+
+ for (i = 0; i < serial->num_bulk_in; ++i)
+ {
+ port = &serial->port[i];
+ if (port->read_urb)
+ {
+ usb_unlink_urb (port->read_urb);
+ usb_free_urb (port->read_urb);
+ }
+ if (port->bulk_in_buffer)
+ kfree (port->bulk_in_buffer);
+ }
+ for (i = 0; i < serial->num_bulk_out; ++i)
+ {
+ port = &serial->port[i];
+ if (port->write_urb)
+ {
+ usb_unlink_urb (port->write_urb);
+ usb_free_urb (port->write_urb);
+ }
+ if (port->bulk_out_buffer)
+ kfree (port->bulk_out_buffer);
+ }
+ for (i = 0; i < serial->num_interrupt_in; ++i)
+ {
+ port = &serial->port[i];
+ if (port->interrupt_in_urb)
+ {
+ usb_unlink_urb (port->interrupt_in_urb);
+ usb_free_urb (port->interrupt_in_urb);
+ }
+ if (port->interrupt_in_buffer)
+ kfree (port->interrupt_in_buffer);
+ }
+
+
+ /* return the minor range that this device had */
+ return_serial (serial);
+
+ /* free up any memory that we allocated */
+ kfree (serial);
+
+
+
+ } else
+ {
+ dev_info(&interface->dev, "device disconnected");
+ }
+
+
+}
+
+
+
+
+
+
+
+static struct usb_serial *get_serial_by_minor (unsigned int minor)
+{
+ return serial_table[minor];
+}
+
+/*****************************************************************************
+ * Driver tty interface functions
+ *****************************************************************************/
+static int serial_open (struct tty_struct *tty, struct file * filp){
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ unsigned int portNumber;
+ int retval = 0;
+
+ mydbg("%s\n", __FUNCTION__);
+
+ /* initialize the pointer incase something fails */
+ tty->driver_data = NULL;
+
+ /* get the serial object associated with this tty pointer */
+ //serial = get_serial_by_minor (MINOR(tty->device));
+
+ /* get the serial object associated with this tty pointer */
+ serial = get_serial_by_minor(tty->index);
+
+
+ if (serial_paranoia_check (serial, __FUNCTION__))
+ return -ENODEV;
+
+
+ /* set up our port structure making the tty driver remember our port object, and us it */
+ portNumber = tty->index - serial->minor;
+ port = &serial->port[portNumber];
+ tty->driver_data = port;
+
+ down (&port->sem);
+ port->tty = tty;
+
+
+ ++port->open_count;
+ if (port->open_count == 1)
+ {
+ port->closePending = 0;
+ mydbg("%s port->closepending = 0\n", __FUNCTION__);
+
+ port->RxHolding = 0;
+ mydbg("%s port->RxHolding = 0\n", __FUNCTION__);
+
+ retval = qt_open(port, filp);
+ }
+
+ if (retval)
+ {
+ port->open_count = 0;
+ }
+ mydbg("%s returning port->closePending = %d\n", __FUNCTION__, port->closePending);
+
+ up (&port->sem);
+ return retval;
+}
+/*****************************************************************************
+ *device's specific driver functions
+ *****************************************************************************/
+static int qt_open (struct usb_serial_port *port, struct file *filp){
+ struct usb_serial *serial = port->serial;
+ int result = 0;
+ unsigned int UartNumber;
+ struct qt_get_device_data DeviceData;
+ struct qt_open_channel_data ChannelData;
+ unsigned short default_divisor = 0x30; //gives 9600 baud rate
+ unsigned char default_LCR = SERIAL_8_DATA; // 8, none , 1
+ int status = 0;
+
+
+
+
+ if (port_paranoia_check (port, __FUNCTION__))
+ return -ENODEV;
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ /* force low_latency on so that our tty_push actually forces the data through,
+ otherwise it is scheduled, and with high data rates (like with OHCI) data
+ can get lost. */
+ if (port->tty)
+ port->tty->low_latency = 0;
+
+
+ UartNumber = port->tty->index - serial->minor;
+
+ status = box_get_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_get_device failed\n");
+ return status;
+ }
+ serial->num_OpenCount++;
+ mydbg("%s serial->num_OpenCount = %d\n", __FUNCTION__, serial->num_OpenCount);
+ //Open uart channel
+
+ //Port specific setups
+ status = BoxOPenCloseChannel(serial, UartNumber, 1, &ChannelData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxOPenCloseChannel failed\n");
+ return status;
+ }
+ mydbg(__FILE__"BoxOPenCloseChannel completed.\n");
+
+ port->shadowLSR = ChannelData.line_status &
+ (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | SERIAL_LSR_BI);
+
+ port->shadowMSR = ChannelData.modem_status &
+ (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD);
+
+
+ //Set Baud rate to default and turn off (default)flow control here
+ status = BoxSetUart(serial, UartNumber, default_divisor, default_LCR);
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetUart failed\n");
+ return status;
+ }
+ mydbg(__FILE__"BoxSetUart completed.\n");
+
+
+ //Put this here to make it responsive to stty and defauls set by the tty layer
+ qt_set_termios(port, NULL);
+
+
+ //Initialize the wait que head
+ init_waitqueue_head(&(port->wait));
+
+ /* if we have a bulk endpoint, start reading from it */
+ if (serial->num_bulk_in)
+ {
+ /* Start reading from the device */
+ usb_fill_bulk_urb (port->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ qt_read_bulk_callback,
+ port);
+
+ port->ReadBulkStopped = 0;
+
+ result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+
+ if (result)
+ {
+ err("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ port->ReadBulkStopped = 1;
+ }
+
+ }
+
+ return result;
+}
+
+static void serial_close(struct tty_struct *tty, struct file * filp){
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ /* if disconnect beat us to the punch here, there's nothing to do */
+ if (tty->driver_data)
+ {
+ if (!port->open_count)
+ {
+ mydbg ("%s - port not opened\n", __FUNCTION__);
+ goto exit;
+ }
+
+ --port->open_count;
+ if (port->open_count <= 0)
+ {
+ port->closePending = 1;
+ mydbg ("%s - port->closePending = 1\n", __FUNCTION__);
+
+ if (serial->dev)
+ {
+ qt_close(port, filp);
+ port->open_count = 0;
+ }
+ }
+
+ }
+
+ exit:
+ up (&port->sem);
+
+ mydbg("%s - %d return\n", __FUNCTION__, port->number);
+
+
+}
+
+static void qt_close (struct usb_serial_port *port, struct file *filp){
+ unsigned long jift = jiffies + 10 * HZ;
+ __u8 LSR_Value, MCR_Value;
+ struct usb_serial *serial = port->serial;
+ int status;
+ unsigned int UartNumber;
+
+ struct qt_open_channel_data ChannelData;
+ status = 0;
+ LSR_Value = 0;
+
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+ UartNumber = port->tty->index - serial->minor;
+
+ /* shutdown any bulk reads that might be going on */
+ if (serial->num_bulk_out)
+ usb_unlink_urb (port->write_urb);
+ if (serial->num_bulk_in)
+ usb_unlink_urb (port->read_urb);
+
+
+ //wait up to 30 seconds for transmitter to empty
+ do
+ {
+ status = BoxGetRegister(serial, UartNumber, LINE_STATUS_REGISTER, &LSR_Value);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_get_device failed\n");
+ break;
+ }
+
+ if ((LSR_Value & SERIAL_LSR_TEMT) && (port->ReadBulkStopped == 1))
+ break;
+ schedule();
+
+
+ }
+ while (jiffies <= jift);
+
+ if(jiffies > jift)
+ mydbg("%s - port %d timout of checking transmitter empty\n", __FUNCTION__, port->number);
+ else
+ mydbg("%s - port %d checking transmitter empty succeded\n", __FUNCTION__, port->number);
+
+
+
+ status = BoxGetRegister(serial, UartNumber, MODEM_CONTROL_REGISTER, &MCR_Value);
+ mydbg(__FILE__"BoxGetRegister MCR = 0x%x.\n", MCR_Value);
+
+
+ if (status >= 0)
+ {
+ MCR_Value &= ~(SERIAL_MCR_DTR | SERIAL_MCR_RTS);
+// status = BoxSetRegister(serial, UartNumber, MODEM_CONTROL_REGISTER, MCR_Value);
+ }
+
+
+ //Close uart channel
+ status = BoxOPenCloseChannel(serial, UartNumber, 0, &ChannelData);
+ if(status < 0)
+ mydbg("%s - port %d BoxOPenCloseChannel failed.\n", __FUNCTION__, port->number);
+
+ serial->num_OpenCount--;
+
+
+}
+
+
+
+static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial;
+ int retval = -EINVAL;
+ unsigned int UartNumber;
+ int from_user = 0;
+
+
+ serial = get_usb_serial (port, __FUNCTION__);
+ if(serial == NULL)
+ return -ENODEV;
+ //This can happen if we get disconnected a
+ if (port->open_count == 0)
+ {
+ return -ENODEV;
+ }
+ UartNumber = port->tty->index - serial->minor;
+
+ mydbg("%s - port %d, %d byte(s)\n", __FUNCTION__, port->number, count);
+ mydbg("%s - port->RxHolding = %d\n", __FUNCTION__, port->RxHolding);
+
+ if (!port->open_count)
+ {
+ mydbg("%s - port not opened\n", __FUNCTION__);
+ goto exit;
+ }
+
+ retval = qt_write(port, from_user, buf, count);
+
+ exit:
+ return retval;
+}
+
+
+static int qt_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count){
+ int result;
+ unsigned int UartNumber;
+
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ if(serial == NULL)
+ return -ENODEV;
+
+
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (count == 0)
+ {
+ mydbg("%s - write request of 0 bytes\n", __FUNCTION__);
+ return(0);
+ }
+
+
+ UartNumber = port->tty->index - serial->minor;
+ /* only do something if we have a bulk out endpoint */
+ if (serial->num_bulk_out)
+ {
+ if (port->write_urb->status == -EINPROGRESS)
+ {
+ mydbg("%s - already writing\n", __FUNCTION__);
+ return(0);
+ }
+
+ count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
+
+ if (from_user)
+ {
+ if (copy_from_user(port->write_urb->transfer_buffer, buf, count))
+ return -EFAULT;
+ } else
+ {
+ memcpy (port->write_urb->transfer_buffer, buf, count);
+ }
+
+ //usb_serial_debug_data(__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer);
+
+ /* set up our urb */
+
+
+ usb_fill_bulk_urb (port->write_urb, serial->dev,
+ usb_sndbulkpipe (serial->dev,
+ port->bulk_out_endpointAddress),
+ port->write_urb->transfer_buffer, count,
+ qt_write_bulk_callback, port);
+
+
+
+
+
+ /* send the data out the bulk port */
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ if (result)
+ mydbg("%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ else
+ result = count;
+
+ return result;
+ }
+
+ /* no bulk out, so return 0 bytes written */
+ return(0);
+}
+
+
+
+static void qt_write_bulk_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (!serial)
+ {
+ mydbg("%s - bad serial pointer, exiting\n", __FUNCTION__);
+ return;
+ }
+
+ if (urb->status)
+ {
+ mydbg("%s - nonzero write bulk status received: %d\n", __FUNCTION__, urb->status);
+ return;
+ }
+ //
+ port_softint(&port->work);
+ schedule_work(&port->work);
+
+ return;
+}
+
+
+static void port_softint(struct work_struct *work)
+{
+ struct usb_serial_port *port =
+ container_of(work, struct usb_serial_port, work);
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ struct tty_struct *tty;
+
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+
+
+ if (!serial)
+ return;
+
+
+ tty = port->tty;
+ if (!tty)
+ return;
+#if 0
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup)
+ {
+ mydbg("%s - write wakeup call.\n", __FUNCTION__);
+ (tty->ldisc.write_wakeup)(tty);
+ }
+#endif
+
+ wake_up_interruptible(&tty->write_wait);
+}
+static int serial_write_room (struct tty_struct *tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -EINVAL;
+
+ if (!serial)
+ return -ENODEV;
+
+ down (&port->sem);
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (!port->open_count)
+ {
+ mydbg("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ retval = qt_write_room(port);
+
+ exit:
+ up (&port->sem);
+ return retval;
+}
+static int qt_write_room (struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ int room = 0;
+ if (port->closePending == 1)
+ {
+ mydbg("%s - port->closePending == 1\n", __FUNCTION__);
+ return -ENODEV;
+ }
+
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (serial->num_bulk_out)
+ {
+ if (port->write_urb->status != -EINPROGRESS)
+ room = port->bulk_out_size;
+ }
+
+ mydbg("%s - returns %d\n", __FUNCTION__, room);
+ return(room);
+}
+static int serial_chars_in_buffer (struct tty_struct *tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -EINVAL;
+
+ if (!serial)
+ return -ENODEV;
+
+ down (&port->sem);
+
+ mydbg("%s = port %d\n", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ mydbg("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ retval = qt_chars_in_buffer(port);
+
+exit:
+ up (&port->sem);
+ return retval;
+}
+
+
+
+static int qt_chars_in_buffer (struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ int chars = 0;
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (serial->num_bulk_out)
+ {
+ if (port->write_urb->status == -EINPROGRESS)
+ chars = port->write_urb->transfer_buffer_length;
+ }
+
+ mydbg("%s - returns %d\n", __FUNCTION__, chars);
+ return(chars);
+}
+
+
+static int serial_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
+{
+
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -ENODEV;
+ unsigned int UartNumber;
+ mydbg("In %s \n", __FUNCTION__);
+
+ if (!serial)
+ return -ENODEV;
+
+
+ UartNumber = port->tty->index - serial->minor;
+
+
+ down (&port->sem);
+
+ mydbg("%s - port %d \n", __FUNCTION__, port->number);
+ mydbg ("%s - port->RxHolding = %d\n", __FUNCTION__, port->RxHolding);
+
+ if (!port->open_count)
+ {
+ mydbg ("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ retval = qt_tiocmset(port, file, set);
+
+ exit:
+ up (&port->sem);
+ return retval;
+}
+
+
+static int qt_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int value)
+{
+
+ __u8 MCR_Value;
+ int status;
+ unsigned int UartNumber;
+
+
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ if(serial == NULL)
+ return -ENODEV;
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ /**************************************************************************************/
+ /** TIOCMGET
+ */
+ UartNumber = port->tty->index - serial->minor;
+ status = BoxGetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER, &MCR_Value);
+ if (status < 0)
+ return -ESPIPE;
+
+ //Turn off the RTS and DTR and loopbcck and then only
+ //trun on what was asked for
+ MCR_Value &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
+ if (value & TIOCM_RTS)
+ MCR_Value |= SERIAL_MCR_RTS;
+ if (value & TIOCM_DTR)
+ MCR_Value |= SERIAL_MCR_DTR;
+ if (value & TIOCM_LOOP)
+ MCR_Value |= SERIAL_MCR_LOOP;
+
+ status = BoxSetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER, MCR_Value);
+ if (status < 0)
+ return -ESPIPE;
+ else
+ return 0;
+}
+
+static int serial_tiocmget(struct tty_struct *tty, struct file *file)
+{
+
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -ENODEV;
+ unsigned int UartNumber;
+ mydbg("In %s \n", __FUNCTION__);
+
+ if (!serial)
+ return -ENODEV;
+
+
+ UartNumber = port->tty->index - serial->minor;
+
+
+ down (&port->sem);
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+ mydbg ("%s - port->RxHolding = %d\n", __FUNCTION__, port->RxHolding);
+
+ if (!port->open_count)
+ {
+ mydbg ("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ retval = qt_tiocmget(port, file);
+
+ exit:
+ up (&port->sem);
+ return retval;
+}
+
+
+
+static int qt_tiocmget(struct usb_serial_port *port, struct file * file)
+{
+
+ __u8 MCR_Value;
+ __u8 MSR_Value;
+ unsigned int result = 0;
+ int status;
+ unsigned int UartNumber;
+ struct tty_struct * tty;
+
+
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ if(serial == NULL)
+ return -ENODEV;
+ tty = port->tty;
+
+ mydbg("%s - port %d, tty =0x%p\n", __FUNCTION__, port->number, tty);
+
+ /**************************************************************************************/
+ /** TIOCMGET
+ */
+ UartNumber = port->tty->index - serial->minor;
+ status = BoxGetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER, &MCR_Value);
+ if (status >= 0)
+ {
+ status = BoxGetRegister(port->serial, UartNumber, MODEM_STATUS_REGISTER, &MSR_Value);
+
+ }
+
+ if (status >= 0)
+ {
+ result = ((MCR_Value & SERIAL_MCR_DTR) ? TIOCM_DTR: 0)
+ //DTR IS SET
+ | ((MCR_Value & SERIAL_MCR_RTS) ? TIOCM_RTS: 0)
+ //RTS IS SET
+ | ((MSR_Value & SERIAL_MSR_CTS) ? TIOCM_CTS: 0)
+ //CTS is set
+ | ((MSR_Value & SERIAL_MSR_CD) ? TIOCM_CAR: 0)
+ //Carrier detect is set
+ | ((MSR_Value & SERIAL_MSR_RI) ? TIOCM_RI: 0)
+ //Ring indicator set
+ | ((MSR_Value & SERIAL_MSR_DSR) ? TIOCM_DSR: 0);
+ //DSR is set
+ return result;
+
+ }
+ else
+ return -ESPIPE;
+ //endif tatus => 0
+}
+
+
+
+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+{
+
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ int retval = -ENODEV;
+ unsigned int UartNumber;
+ mydbg("In %s \n", __FUNCTION__);
+
+ if (!serial)
+ return -ENODEV;
+
+
+ UartNumber = port->tty->index - serial->minor;
+
+
+ down (&port->sem);
+
+ mydbg("%s - port %d, cmd 0x%.4x\n", __FUNCTION__, port->number, cmd);
+ mydbg ("%s - port->RxHolding = %d\n", __FUNCTION__, port->RxHolding);
+
+ if (!port->open_count)
+ {
+ mydbg ("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ retval = qt_ioctl(port, file, cmd, arg);
+
+ exit:
+ up (&port->sem);
+ return retval;
+}
+static int qt_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+{
+ __u8 MCR_Value;
+ __u8 MSR_Value;
+ unsigned short Prev_MSR_Value;
+ unsigned int value, result = 0;
+ int status;
+ unsigned int UartNumber;
+ struct tty_struct * tty;
+
+
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ if(serial == NULL)
+ return -ENODEV;
+ tty = port->tty;
+
+ mydbg("%s - port %d, tty =0x%p\n", __FUNCTION__, port->number, tty);
+
+ /**************************************************************************************/
+ /** TIOCMGET
+ */
+ UartNumber = port->tty->index - serial->minor;
+
+ if(cmd == TIOCMGET)
+ {
+ MCR_Value = port->shadowMCR;
+ MSR_Value = port->shadowMSR;
+
+ {
+ result = ((MCR_Value & SERIAL_MCR_DTR) ? TIOCM_DTR: 0)
+ //DTR IS SET
+ | ((MCR_Value & SERIAL_MCR_RTS) ? TIOCM_RTS: 0)
+ //RTS IS SET
+ | ((MSR_Value & SERIAL_MSR_CTS) ? TIOCM_CTS: 0)
+ //CTS is set
+ | ((MSR_Value & SERIAL_MSR_CD) ? TIOCM_CAR: 0)
+ //Carrier detect is set
+ | ((MSR_Value & SERIAL_MSR_RI) ? TIOCM_RI: 0)
+ //Ring indicator set
+ | ((MSR_Value & SERIAL_MSR_DSR) ? TIOCM_DSR: 0);
+ //DSR is set
+ if(copy_to_user((unsigned int *)arg, &result, sizeof(unsigned int)))
+ return -EFAULT;
+ return 0;
+
+ }//endif tatus => 0
+
+ }//endif(cmd == TIOCMGET)
+ /**************************************************************************************/
+ /** End TIOCMGET
+ */
+ /**************************************************************************************/
+ /** TIOCMBIS, TIOCMBIC, AND TIOCMSET */
+
+ /**************************************************************************************/
+
+ if(cmd == TIOCMBIS || cmd == TIOCMBIC || cmd == TIOCMSET)
+ {
+ status = BoxGetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER, &MCR_Value);
+ if (status < 0)
+ return -ESPIPE;
+ if (copy_from_user(&value, (unsigned int *)arg, sizeof(unsigned int)))
+ return -EFAULT;
+
+ switch (cmd)
+ {
+ case TIOCMBIS:
+ if (value & TIOCM_RTS)
+ MCR_Value |= SERIAL_MCR_RTS;
+ if (value & TIOCM_DTR)
+ MCR_Value |= SERIAL_MCR_DTR;
+ if (value & TIOCM_LOOP)
+ MCR_Value |= SERIAL_MCR_LOOP;
+ break;
+ case TIOCMBIC:
+ if (value & TIOCM_RTS)
+ MCR_Value &= ~SERIAL_MCR_RTS;
+ if (value & TIOCM_DTR)
+ MCR_Value &= ~SERIAL_MCR_DTR;
+ if (value & TIOCM_LOOP)
+ MCR_Value &= ~SERIAL_MCR_LOOP;
+ break;
+ case TIOCMSET:
+ //Turn off the RTS and DTR and loopbcck and then only
+ //trun on what was asked for
+ MCR_Value &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
+ if (value & TIOCM_RTS)
+ MCR_Value |= SERIAL_MCR_RTS;
+ if (value & TIOCM_DTR)
+ MCR_Value |= SERIAL_MCR_DTR;
+ if (value & TIOCM_LOOP)
+ MCR_Value |= SERIAL_MCR_LOOP;
+ break;
+ default:
+ break;
+
+ }
+ status = BoxSetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER, MCR_Value);
+ if (status < 0)
+ return -ESPIPE;
+ else
+ {
+ port->shadowMCR = MCR_Value;
+ return 0;
+ }
+
+
+ }
+ /**************************************************************************************/
+ /** TIOCMBIS, TIOCMBIC, AND TIOCMSET end
+ */
+ /**************************************************************************************/
+
+ if(cmd == TIOCMIWAIT)
+ {
+ DECLARE_WAITQUEUE(wait, current);
+ Prev_MSR_Value = port->shadowMSR & SERIAL_MSR_MASK;
+ while(1)
+ {
+ add_wait_queue(&port->wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ remove_wait_queue(&port->wait, &wait);
+ /* see if a signal woke us up */
+ if(signal_pending(current))
+ return -ERESTARTSYS;
+ MSR_Value = port->shadowMSR & SERIAL_MSR_MASK;
+ if(MSR_Value == Prev_MSR_Value)
+ return -EIO; //no change error
+
+ if((arg & TIOCM_RNG && ((Prev_MSR_Value & SERIAL_MSR_RI) ==
+ (MSR_Value & SERIAL_MSR_RI))) ||
+ (arg & TIOCM_DSR && ((Prev_MSR_Value & SERIAL_MSR_DSR) ==
+ (MSR_Value & SERIAL_MSR_DSR))) ||
+ (arg & TIOCM_CD && ((Prev_MSR_Value & SERIAL_MSR_CD) ==
+ (MSR_Value & SERIAL_MSR_CD))) ||
+ (arg & TIOCM_CTS && ((Prev_MSR_Value & SERIAL_MSR_CTS) ==
+ (MSR_Value & SERIAL_MSR_CTS))))
+ {
+ return 0;
+ }
+
+ }//endwhile
+
+ }
+ mydbg("%s -No ioctl for that one. port = %d\n", __FUNCTION__, port->number);
+
+
+ return -ENOIOCTLCMD;
+}
+
+static void serial_set_termios (struct tty_struct *tty, struct ktermios *old)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ mydbg("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ /* pass on to the driver specific version of this function if it is available */
+ qt_set_termios(port, old);
+
+exit:
+ up (&port->sem);
+}
+
+static void qt_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ unsigned int cflag;
+ int baud, divisor, remainder;
+ unsigned char LCR_change_to = 0;
+ struct tty_struct *tty;
+ int status;
+ struct usb_serial *serial;
+ __u16 UartNumber;
+ __u16 tmp, tmp2;
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ tmp = port->tty->index;
+ mydbg("%s - MINOR(port->tty->index) = %d\n", __FUNCTION__, tmp);
+
+
+ serial = port->serial;
+ tmp2 = serial->minor;
+ mydbg("%s - serial->minor = %d\n", __FUNCTION__, tmp2);
+
+
+
+ UartNumber = port->tty->index - serial->minor;
+
+ tty = port->tty;
+
+ cflag = tty->termios->c_cflag;
+
+ if (old_termios)
+ {
+ if((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+ RELEVANT_IFLAG(old_termios->c_iflag)))
+ {
+ mydbg("%s - Nothing to change\n", __FUNCTION__);
+ return;
+ }
+
+
+ }
+
+ mydbg("%s - 3\n", __FUNCTION__);
+
+ switch(cflag)
+ {
+ case CS5:
+ LCR_change_to |= SERIAL_5_DATA;
+ break;
+ case CS6:
+ LCR_change_to |= SERIAL_6_DATA;
+ break;
+ case CS7:
+ LCR_change_to |= SERIAL_7_DATA;
+ break;
+ default:
+ case CS8:
+ LCR_change_to |= SERIAL_8_DATA;
+ break;
+ }
+
+ //Parity stuff
+ if(cflag & PARENB)
+ {
+ if(cflag & PARODD)
+ LCR_change_to |= SERIAL_ODD_PARITY;
+ else
+ LCR_change_to |= SERIAL_EVEN_PARITY;
+ }
+ if(cflag & CSTOPB)
+ LCR_change_to |= SERIAL_TWO_STOPB;
+ else
+ LCR_change_to |= SERIAL_TWO_STOPB;
+
+ mydbg("%s - 4\n", __FUNCTION__);
+ //Thats the LCR stuff, go ahead and set it
+ baud = tty_get_baud_rate(tty);
+ if (!baud) {
+ /* pick a default, any default... */
+ baud = 9600;
+ }
+
+ mydbg("%s - got baud = %d\n", __FUNCTION__, baud);
+
+
+ divisor = MAX_BAUD_RATE / baud;
+ remainder = MAX_BAUD_RATE % baud;
+ //Round to nearest divisor
+ if(((remainder * 2) >= baud) && (baud != 110))
+ divisor++;
+
+ //Set Baud rate to default and turn off (default)flow control here
+ status = BoxSetUart(serial, UartNumber, (unsigned short) divisor, LCR_change_to);
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetUart failed\n");
+ return;
+ }
+ //************************Now determine flow control
+
+ if(cflag & CRTSCTS)
+ {
+ mydbg("%s - Enabling HW flow control port %d\n", __FUNCTION__, port->number);
+
+ //Enable RTS/CTS flow control
+ status = BoxSetHW_FlowCtrl(serial, UartNumber, 1);
+
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetHW_FlowCtrl failed\n");
+ return;
+ }
+ }
+ else
+ {
+ //Disable RTS/CTS flow control
+ mydbg("%s - disabling HW flow control port %d\n", __FUNCTION__, port->number);
+
+ status = BoxSetHW_FlowCtrl(serial, UartNumber, 0);
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetHW_FlowCtrl failed\n");
+ return;
+ }
+
+
+ }
+
+ //*************************************************
+ /* if we are implementing XON/XOFF, set the start and stop character in the device */
+ if (I_IXOFF(tty) || I_IXON(tty))
+ {
+ unsigned char stop_char = STOP_CHAR(tty);
+ unsigned char start_char = START_CHAR(tty);
+ status = BoxSetSW_FlowCtrl(serial, UartNumber, stop_char, start_char);
+ if(status < 0)
+ mydbg(__FILE__"BoxSetSW_FlowCtrl (enabled) failed\n");
+
+ }
+ else
+ {
+ //disable SW flow control
+ status = BoxDisable_SW_FlowCtrl(serial, UartNumber);
+ if(status < 0)
+ mydbg(__FILE__"BoxSetSW_FlowCtrl (diabling) failed\n");
+
+ }
+
+
+
+}
+/****************************************************************************
+* BoxGetRegister
+* issuse a GET_REGISTER vendor-spcific request on the default control pipe
+* If successful, fills in the pValue with the register value asked for
+****************************************************************************/
+static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
+ unsigned short Register_Num, __u8 *pValue )
+{
+ int result;
+ __u16 current_length;
+
+
+ current_length = sizeof(struct qt_get_device_data);
+
+ result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), QT_GET_SET_REGISTER,
+ 0xC0, Register_Num, Uart_Number, (void *)pValue, sizeof(*pValue), 300);
+
+ return result;
+}
+/****************************************************************************
+* BoxSetRegister
+* issuse a GET_REGISTER vendor-spcific request on the default control pipe
+* If successful, fills in the pValue with the register value asked for
+****************************************************************************/
+static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
+ unsigned short Register_Num, unsigned short Value )
+{
+ int result;
+ unsigned short RegAndByte;
+
+
+ RegAndByte = Value;
+ RegAndByte = RegAndByte << 8;
+ RegAndByte = RegAndByte + Register_Num;
+
+// result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_GET_SET_REGISTER,
+// 0xC0, Register_Num, Uart_Number, NULL, 0, 300);
+
+
+ result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_GET_SET_REGISTER,
+ 0x40, RegAndByte, Uart_Number, NULL,0, 300);
+
+
+ return result;
+}
+
+
+
+/**
+ * box_get_device
+ * Issue a GET_DEVICE vendor-specific request on the default control pipe If
+ * successful, fills in the qt_get_device_data structure pointed to by
+ * device_data, otherwise return a negative error number of the problem.
+ */
+static int box_get_device(struct usb_serial *serial,
+ struct qt_get_device_data *device_data)
+{
+ int result;
+ __u16 current_length;
+ unsigned char *transfer_buffer;
+
+ current_length = sizeof(struct qt_get_device_data);
+ transfer_buffer = kmalloc(current_length, GFP_KERNEL);
+ if (!transfer_buffer)
+ return -ENOMEM;
+
+ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ QT_SET_GET_DEVICE, 0xc0, 0, 0,
+ transfer_buffer, current_length, 300);
+ if (result > 0)
+ memcpy(device_data, transfer_buffer, current_length);
+ kfree(transfer_buffer);
+
+ return result;
+}
+
+/**
+ * box_set_device
+ * Issue a SET_DEVICE vendor-specific request on the default control pipe If
+ * successful returns the number of bytes written, otherwise it returns a
+ * negative error number of the problem.
+ */
+static int box_set_device(struct usb_serial *serial, struct qt_get_device_data *device_data)
+{
+ int result;
+ __u16 length;
+ __u16 PortSettings;
+
+ PortSettings = ((__u16)(device_data->portb));
+ PortSettings = (PortSettings << 8);
+ PortSettings += ((__u16)(device_data->porta));
+
+ length = sizeof(struct qt_get_device_data);
+ mydbg("%s - PortSettings = 0x%x\n", __FUNCTION__, PortSettings);
+
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ QT_SET_GET_DEVICE, 0x40, PortSettings,
+ 0, NULL, 0, 300);
+ return result;
+}
+
+/****************************************************************************
+ * BoxOPenCloseChannel
+ * This funciotn notifies the device that the device driver wishes to open a particular UART channel. its
+ * purpose is to allow the device driver and the device to synchronize state information.
+ * OpenClose = 1 for open , 0 for close
+ ****************************************************************************/
+static int BoxOPenCloseChannel(struct usb_serial *serial, __u16 Uart_Number, __u16 OpenClose, struct qt_open_channel_data *pDeviceData)
+{
+ int result;
+ __u16 length;
+ __u8 Direcion;
+ unsigned int pipe;
+ length = sizeof(struct qt_open_channel_data);
+
+ if (OpenClose == 1) //IF OPENING
+ {
+ Direcion = USBD_TRANSFER_DIRECTION_IN;
+ pipe = usb_rcvctrlpipe(serial->dev, 0);
+ result = usb_control_msg (serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
+ Direcion, OpenClose, Uart_Number, pDeviceData, length, 300);
+
+
+ }
+ else
+ {
+ Direcion = USBD_TRANSFER_DIRECTION_OUT;
+ pipe = usb_sndctrlpipe(serial->dev, 0);
+ result = usb_control_msg (serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
+ Direcion, OpenClose, Uart_Number, NULL, 0, 300);
+
+ }
+
+
+
+ return result;
+}
+
+/****************************************************************************
+ * BoxSetPrebufferLevel
+ TELLS BOX WHEN TO ASSERT FLOW CONTROL
+ ****************************************************************************/
+static int BoxSetPrebufferLevel(struct usb_serial *serial)
+{
+ int result;
+ __u16 buffer_length;
+
+ buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ QT_GET_SET_PREBUF_TRIG_LVL, 0x40,
+ buffer_length, 0, NULL, 0, 300);
+ return result;
+}
+
+
+
+/****************************************************************************
+ * BoxSetATC
+ TELLS BOX WHEN TO ASSERT automatic transmitter control
+ ****************************************************************************/
+static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode)
+{
+ int result;
+ __u16 buffer_length;
+
+
+ buffer_length = PREFUFF_LEVEL_CONSERVATIVE;
+
+ result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_SET_ATF,
+ 0x40, n_Mode, 0, NULL, 0, 300);
+
+ return result;
+}
+
+/****************************************************************************
+* BoxSetUart
+* issuse a SET_UART vendor-spcific request on the default control pipe
+* If successful sets baud rate divisor and LCR value
+****************************************************************************/
+static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number,
+ unsigned short default_divisor, unsigned char default_LCR )
+{
+ int result;
+ unsigned short UartNumandLCR;
+
+ UartNumandLCR = (default_LCR << 8) + Uart_Number;
+
+ result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_GET_SET_UART,
+ 0x40, default_divisor, UartNumandLCR, NULL, 0, 300);
+
+ return result;
+}
+
+
+static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int UartNumber, int bSet)
+{
+ __u8 MCR_Value = 0;
+ __u8 MSR_Value = 0, MOUT_Value = 0;
+ struct usb_serial_port *port;
+ unsigned int status;
+
+ port = serial->port;
+
+ if (bSet == 1)
+ {
+ MCR_Value = SERIAL_MCR_RTS; //flow control, box will clear RTS line to prevent remote
+ } //device from xmitting more chars
+ else
+ { //no flow control to remote device
+ MCR_Value = 0;
+
+ }
+ MOUT_Value = MCR_Value << 8;
+
+
+ if(bSet == 1)
+ {
+ MSR_Value = SERIAL_MSR_CTS; //flow control, box will inhibit xmit data if CTS line is asserted
+ }
+ else
+ {
+ MSR_Value = 0; //Box will not inhimbe xmit data due to CTS line
+ }
+ MOUT_Value |= MSR_Value;
+
+
+ status = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_HW_FLOW_CONTROL_MASK,
+ 0x40, MOUT_Value, UartNumber, NULL, 0, 300);
+ return status;
+
+}
+
+static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber, unsigned char stop_char, unsigned char start_char)
+{
+ __u16 nSWflowout;
+ int result;
+
+ nSWflowout = start_char << 8;
+ nSWflowout = (unsigned short)stop_char;
+
+ result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_SW_FLOW_CONTROL_MASK,
+ 0x40, nSWflowout, UartNumber, NULL, 0, 300);
+ return result;
+
+}
+static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber)
+{
+ int result;
+
+
+ result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_SW_FLOW_CONTROL_DISABLE,
+ 0x40, 0, UartNumber, NULL, 0, 300);
+ return result;
+
+}
+
+
+/*****************************************************************************
+ * SerialThrottle
+ * this function is called by the tty driver when it wants to stop the data
+ * being read from the port.
+ *****************************************************************************/
+
+
+static void serial_throttle (struct tty_struct * tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (!serial)
+ return;
+
+ down (&port->sem);
+
+
+ if (!port->open_count) {
+ mydbg ("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+ //shut down any bulk reads that may be going on
+// usb_unlink_urb (port->read_urb);
+ /* pass on to the driver specific version of this function */
+ port->RxHolding = 1;
+ mydbg("%s - port->RxHolding = 1\n", __FUNCTION__);
+
+
+exit:
+ up (&port->sem);
+ return;
+}
+
+static void serial_unthrottle (struct tty_struct * tty)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ unsigned int result;
+
+ if (!serial)
+ return;
+ down (&port->sem);
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ mydbg ("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ if(port->RxHolding == 1)
+ {
+ mydbg ("%s -port->RxHolding == 1\n", __FUNCTION__);
+
+ port->RxHolding = 0;
+ mydbg ("%s - port->RxHolding = 0\n", __FUNCTION__);
+
+ /* if we have a bulk endpoint, start it up */
+ if ((serial->num_bulk_in) && (port->ReadBulkStopped == 1))
+ {
+ /* Start reading from the device */
+ usb_fill_bulk_urb (port->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ qt_read_bulk_callback,
+ port);
+ result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ if (result)
+ err("%s - failed restarting read urb, error %d", __FUNCTION__, result);
+ }
+ }
+ exit:
+ up (&port->sem);
+ return;
+
+
+
+}
+
+
+static int serial_break (struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+ __u16 UartNumber, Break_Value;
+ unsigned int result;
+
+ UartNumber = port->tty->index - serial->minor;
+ if (!serial)
+ return -ENODEV;
+
+ if(break_state == -1)
+ Break_Value = 1;
+ else
+ Break_Value = 0;
+
+ down (&port->sem);
+
+ mydbg("%s - port %d\n", __FUNCTION__, port->number);
+
+ if (!port->open_count) {
+ mydbg("%s - port not open\n", __FUNCTION__);
+ goto exit;
+ }
+
+ result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_BREAK_CONTROL,
+ 0x40, Break_Value, UartNumber, NULL, 0, 300);
+
+exit:
+ up (&port->sem);
+ return 0;
+}
+
+
+
+
+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ struct usb_serial *serial;
+ int length = 0;
+ int i;
+ off_t begin = 0;
+
+ mydbg("%s\n", __FUNCTION__);
+ length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION);
+ for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
+ serial = get_serial_by_minor(i);
+ if (serial == NULL)
+ continue;
+
+ length += sprintf (page+length, "%d:\n", i);
+ length += sprintf (page+length, " vendor:%04x product:%04x\n", serial->vendor, serial->product);
+ length += sprintf (page+length, " num_ports:%d\n", serial->num_ports);
+ length += sprintf (page+length, " port:%d\n", i - serial->minor + 1);
+
+// usb_make_path(serial->dev, tmp, sizeof(tmp));
+// length += sprintf (page+length, " path:%s", tmp);
+
+ length += sprintf (page+length, "\n");
+ if ((length + begin) > (off + count))
+ goto done;
+ if ((length + begin) < off) {
+ begin += length;
+ length = 0;
+ }
+ }
+ *eof = 1;
+done:
+ if (off >= (length + begin))
+ return 0;
+ *start = page + (off-begin);
+ return ((count < begin+length-off) ? count : begin+length-off);
+}
+
+
+
+int ioctl_serial_usb (struct inode *innod, struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+
+ unsigned err;
+ unsigned ucOPR_NewValue, uc_Value;
+ int *p_Num_of_adapters, counts, index, *p_QMCR_Value;
+ struct identity *p_Identity_of;
+ struct identity Identity_of;
+ struct usb_serial *lastserial, *serial;
+
+ mydbg(KERN_DEBUG"ioctl_serial_usb cmd =\n");
+ if (_IOC_TYPE(cmd) != SERIALQT_PCI_IOC_MAGIC)
+ return -ENOTTY;
+ if (_IOC_NR(cmd) > SERIALQT_IOC_MAXNR)
+ return -ENOTTY;
+ mydbg(KERN_DEBUG"ioctl_serial_usb cmd = 0x%x\n", cmd);
+ err = 0;
+ switch (cmd)
+ {
+
+
+ case SERIALQT_WRITE_QMCR:
+ err = -ENOTTY; //initialize as error so if we don't find this one we give//an error.
+ index = arg >> 16;
+ counts = 0;
+
+ ucOPR_NewValue = arg;
+
+
+ err = EmulateWriteQMCR_Reg(index, ucOPR_NewValue);
+ break;
+
+ case SERIALQT_READ_QMCR:
+ err = -ENOTTY; //initialize as error so if we don't find this one we give
+ //an error.
+ p_QMCR_Value = (int *)arg;
+ index = arg >> 16;
+ counts = 0;
+
+
+
+ err = EmulateReadQMCR_Reg(index, &uc_Value);
+ if (err == 0)
+ {
+ err = put_user(uc_Value, p_QMCR_Value);
+ }
+ break;
+
+ case SERIALQT_GET_NUMOF_UNITS:
+ p_Num_of_adapters = (int *)arg;
+ counts = 0; //Initialize counts to zero
+ //struct usb_serial *lastserial = serial_table[0], *serial;
+ lastserial = serial_table[0];
+
+ mydbg(KERN_DEBUG"SERIALQT_GET_NUMOF_UNITS \n");
+ //if first pointer is nonull, we at least have one box
+ if(lastserial)
+ counts = 1; //we at least have one box
+
+ for (index = 1; index < SERIAL_TTY_MINORS ; index++)
+ {
+ serial = serial_table[index];
+ if(serial)
+ {
+ if(serial != lastserial)
+ {
+ //we had a change in the array, hence another box is there
+ lastserial = serial;
+ counts++;
+ }
+ }
+ else
+ break;
+ }
+
+ mydbg(KERN_DEBUG"ioctl_serial_usb writting counts = %d", counts);
+
+ err = put_user(counts, p_Num_of_adapters);
+
+
+ break;
+ case SERIALQT_GET_THIS_UNIT:
+ counts = 0;
+ p_Identity_of = (struct identity *)arg;
+ //copy user structure to local variable
+ get_user(Identity_of.index, &p_Identity_of->index);
+ mydbg(KERN_DEBUG"SERIALQT_GET_THIS_UNIT Identity_of.index\n");
+ mydbg(KERN_DEBUG"SERIALQT_GET_THIS_UNIT Identity_of.index= 0x%x\n", Identity_of.index);
+
+ err = -ENOTTY; //initialize as error so if we don't find this one we give
+ //an error.
+ serial = find_the_box(Identity_of.index);
+ if(serial)
+ {
+ err = put_user(serial->product, &p_Identity_of->n_identity);
+
+ }
+ break;
+
+ case SERIALQT_IS422_EXTENDED:
+ err = -ENOTTY; //initialize as error so if we don't find this one we give
+ mydbg(KERN_DEBUG"SERIALQT_IS422_EXTENDED \n");
+ //an error.
+ index = arg >> 16;
+
+
+ counts = 0;
+
+ mydbg(KERN_DEBUG"SERIALQT_IS422_EXTENDED, looking Identity_of.indext = 0x%x\n",index);
+ serial = find_the_box(index);
+ if(serial)
+ {
+ mydbg("%s index = 0x%x, serial = 0x%p\n", __FUNCTION__, index, serial);
+ for (counts = 0; serqt_422_table[counts] != 0; counts++)
+ {
+
+ mydbg("%s serial->product = = 0x%x, serqt_422_table[counts] = 0x%x\n", __FUNCTION__, serial->product, serqt_422_table[counts]);
+ if(serial->product == serqt_422_table[counts])
+ {
+ err = 0;
+
+ mydbg("%s found match for 422extended\n", __FUNCTION__);
+ break;
+ }
+ }
+ }
+ break;
+
+
+
+
+ default:
+ err = -ENOTTY;
+
+
+
+
+ } //End switch
+
+ mydbg("%s returning err = 0x%x\n", __FUNCTION__, err);
+ return err;
+}
+
+
+
+static struct usb_serial *find_the_box(unsigned int index)
+{
+ struct usb_serial *lastserial, *foundserial, *serial;
+ int counts = 0, index2;
+ lastserial = serial_table[0];
+ foundserial = NULL;
+ for (index2 = 0; index2 < SERIAL_TTY_MINORS ; index2++)
+ {
+ serial = serial_table[index2];
+
+ mydbg("%s index = 0x%x, index2 = 0x%x, serial = 0x%p\n", __FUNCTION__, index, index2, serial);
+
+ if(serial)
+ {
+ //first see if this is the unit we'er looking for
+ mydbg("%s inside if(serial) counts = 0x%x , index = 0x%x\n", __FUNCTION__, counts, index);
+ if(counts == index)
+ {
+ //we found the one we're looking for, copythe product Id to user
+
+ mydbg("%s we found the one we're looking for serial = 0x%p\n", __FUNCTION__, serial);
+ foundserial = serial;
+ break;
+ }
+
+ if(serial != lastserial)
+ {
+ //when we have a change in the pointer
+ lastserial = serial;
+ counts++;
+ }
+ }
+ else
+ break; // no matches
+ }
+
+ mydbg("%s returning foundserial = 0x%p\n", __FUNCTION__, foundserial);
+ return foundserial;
+}
+
+
+
+ static int EmulateWriteQMCR_Reg(int index, unsigned uc_value)
+ {
+
+ __u16 ATC_Mode = 0;
+ struct usb_serial *serial;
+ int status;
+ struct qt_get_device_data DeviceData;
+ unsigned uc_temp = 0;
+ mydbg("Inside %s, uc_value = 0x%x\n", __FUNCTION__, uc_value);
+
+ DeviceData.porta = 0;
+ DeviceData.portb = 0;
+ serial = find_the_box(index);
+ //Determine Duplex mode
+ if(!(serial))
+ return -ENOTTY;
+ status = box_get_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_set_device failed\n");
+ return status;
+ }
+
+ uc_temp = uc_value & QMCR_HALF_DUPLEX_MASK;
+ switch (uc_temp)
+ {
+ case QMCR_FULL_DUPLEX:
+ DeviceData.porta &= ~DUPMODE_BITS;
+ DeviceData.porta |= FULL_DUPLEX;
+ ATC_Mode = ATC_DISABLED;
+ break;
+ case QMCR_HALF_DUPLEX_RTS:
+ DeviceData.porta &= ~DUPMODE_BITS;
+ DeviceData.porta |= HALF_DUPLEX_RTS;
+ ATC_Mode = ATC_RTS_ENABLED;
+ break;
+ case QMCR_HALF_DUPLEX_DTR:
+ DeviceData.porta &= ~DUPMODE_BITS;
+ DeviceData.porta |= HALF_DUPLEX_DTR;
+ ATC_Mode = ATC_DTR_ENABLED;
+ break;
+ default:
+ break;
+ }
+
+ uc_temp = uc_value & QMCR_CONNECTOR_MASK;
+ switch (uc_temp)
+ {
+ case QMCR_MODEM_CONTROL:
+ DeviceData.portb &= ~LOOPMODE_BITS; //reset connection bits
+ DeviceData.portb |= MODEM_CTRL;
+ break;
+ case QMCR_ALL_LOOPBACK:
+ DeviceData.portb &= ~LOOPMODE_BITS; //reset connection bits
+ DeviceData.portb |= ALL_LOOPBACK;
+ break;
+ }
+
+ mydbg(__FILE__"Calling box_set_device with failed\n");
+ status = box_set_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_set_device failed\n");
+ return status;
+ }
+
+ if(uc_value & QMCR_RX_EN_MASK) //This bit (otherwise unused) i'll used to detect whether ATC is selected
+ {
+
+ mydbg(__FILE__"calling BoxsetATC with DeviceData.porta = 0x%x and DeviceData.portb = 0x%x\n", DeviceData.porta, DeviceData.portb);
+ status = BoxSetATC(serial, ATC_Mode);
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetATC failed\n");
+ return status;
+ }
+ }
+ else
+ {
+
+ mydbg(__FILE__"calling BoxsetATC with DeviceData.porta = 0x%x and DeviceData.portb = 0x%x\n", DeviceData.porta, DeviceData.portb);
+ status = BoxSetATC(serial, ATC_DISABLED);
+ if (status < 0)
+ {
+ mydbg(__FILE__"BoxSetATC failed\n");
+ return status;
+ }
+ }
+
+
+ return 0;
+
+ }
+
+
+static int EmulateReadQMCR_Reg(int index, unsigned *uc_value)
+{
+ struct usb_serial *serial;
+ int status;
+ struct qt_get_device_data DeviceData;
+ __u8 uc_temp;
+
+ *uc_value = 0;
+
+ serial = find_the_box(index);
+ if(!(serial))
+ return -ENOTTY;
+
+ status = box_get_device(serial, &DeviceData);
+ if (status < 0)
+ {
+ mydbg(__FILE__"box_get_device failed\n");
+ return status;
+ }
+ uc_temp = DeviceData.porta & DUPMODE_BITS;
+ switch (uc_temp)
+ {
+ case FULL_DUPLEX:
+ *uc_value |= QMCR_FULL_DUPLEX;
+ break;
+ case HALF_DUPLEX_RTS:
+ *uc_value |= QMCR_HALF_DUPLEX_RTS;
+ break;
+ case HALF_DUPLEX_DTR:
+ *uc_value |= QMCR_HALF_DUPLEX_DTR;
+ break;
+ default:
+ break;
+ }
+
+ uc_temp = DeviceData.portb & LOOPMODE_BITS; //I use this for ATC control se
+
+ switch (uc_temp)
+ {
+ case ALL_LOOPBACK:
+ *uc_value |= QMCR_ALL_LOOPBACK;
+ break;
+ case MODEM_CTRL:
+ *uc_value |= QMCR_MODEM_CONTROL;
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+
+
+ }
+
+static int __init serqt_usb_init(void)
+{
+ int i, result;
+ int status = 0;
+
+ mydbg("%s\n", __FUNCTION__);
+ tty_set_operations(&serial_tty_driver, &serial_ops);
+ result = tty_register_driver(&serial_tty_driver);
+ if (result) {
+ mydbg("tty_register_driver failed error = 0x%x", result);
+ return result;
+ }
+
+ /* Initalize our global data */
+ for (i = 0; i < SERIAL_TTY_MINORS; ++i)
+ serial_table[i] = NULL;
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&serqt_usb_driver);
+ if (result < 0) {
+ err("usb_register failed for the "__FILE__" driver. Error number %d", result);
+ return result;
+ }
+ status = 0; // Dynamic assignment of major number
+ major_number = register_chrdev(status, "SerialQT_USB", &serialqt_usb_fops);
+ if (major_number < 0) {
+ mydbg(KERN_DEBUG"No devices found \n\n");
+ return -EBUSY;
+ } else
+ mydbg(KERN_DEBUG"SerQT_USB major number assignment = %d \n\n", major_number);
+
+ printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION);
+ return 0;
+}
+
+static void __exit serqt_usb_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&serqt_usb_driver);
+ tty_unregister_driver(&serial_tty_driver);
+ unregister_chrdev(major_number, "SerialQT_USB");
+}
+
+module_init(serqt_usb_init);
+module_exit(serqt_usb_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");