Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (51 commits)
  [libata] bump versions
  [libata] Trim trailing whitespace.
  [libata] sata_mv: Fix 50xx irq mask
  [libata] sata_mv: don't touch reserved bits in EDMA config register
  libata: Use new id_to_dma_mode function to tidy reporting in more drivers (minimally tested)
  pata_pcmcia: Fix oops in 2.6.21-rc1
  Add id_to_dma_mode function for printing DMA modes
  sata_promise: simplify port setup
  sata_promise: fix 20619 new EH merge error
  [libata] ACPI: remove needless ->qc_issue hook existence test
  sata_vsc: refactor vsc_sata_interrupt and hook up error handling
  sata_sil: ignore and clear spurious IRQs while executing commands by polling
  sata_mv: fix pci_enable_msi() error handling
  pata_amd: fix an obvious bug in cable detection
  [libata] ata_piix: remove duplicate PCI IDs
  sata_nv: complain on spurious completion notifiers
  libata: test major version in ata_id_is_sata()
  sata_nv: kill old private BMDMA helper functions
  libata: fix remaining ap->id
  ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated)
  ...

51 files changed, 1985 insertions, 552 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4af0a4bb578..d16b5b0c8b7 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -562,6 +562,15 @@ config PATA_IXP4XX_CF
 
 	  If unsure, say N.
 
+config PATA_SCC
+	tristate "Toshiba's Cell Reference Set IDE support"
+	depends on PCI && PPC_IBM_CELL_BLADE
+	help
+	  This option enables support for the built-in IDE controller on
+	  Toshiba Cell Reference Board.
+
+	  If unsure, say N.
+
 endif
 endmenu
 
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 74298afbbaa..13d7397e000 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
 obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
 obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
+obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 # Should be last but one libata driver
 obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6a3543e0624..6d932409aad 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ahci"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 
 enum {
@@ -198,7 +198,6 @@ struct ahci_port_priv {
 	void			*rx_fis;
 	dma_addr_t		rx_fis_dma;
 	/* for NCQ spurious interrupt analysis */
-	int			ncq_saw_spurious_sdb_cnt;
 	unsigned int		ncq_saw_d2h:1;
 	unsigned int		ncq_saw_dmas:1;
 };
@@ -1160,23 +1159,24 @@ static void ahci_host_intr(struct ata_port *ap)
 		known_irq = 1;
 	}
 
-	if (status & PORT_IRQ_SDB_FIS &&
-		   pp->ncq_saw_spurious_sdb_cnt < 10) {
+	if (status & PORT_IRQ_SDB_FIS) {
 		/* SDB FIS containing spurious completions might be
-		 * dangerous, we need to know more about them.  Print
-		 * more of it.
-		 */
+		 * dangerous, whine and fail commands with HSM
+		 * violation.  EH will turn off NCQ after several such
+		 * failures.
+  		 */
 		const __le32 *f = pp->rx_fis + RX_FIS_SDB;
 
-		ata_port_printk(ap, KERN_INFO, "Spurious SDB FIS during NCQ "
-				"issue=0x%x SAct=0x%x FIS=%08x:%08x%s\n",
-				readl(port_mmio + PORT_CMD_ISSUE),
-				readl(port_mmio + PORT_SCR_ACT),
-				le32_to_cpu(f[0]), le32_to_cpu(f[1]),
-				pp->ncq_saw_spurious_sdb_cnt < 10 ?
-				"" : ", shutting up");
+		ata_ehi_push_desc(ehi, "spurious completion during NCQ "
+				  "issue=0x%x SAct=0x%x FIS=%08x:%08x",
+				  readl(port_mmio + PORT_CMD_ISSUE),
+				  readl(port_mmio + PORT_SCR_ACT),
+				  le32_to_cpu(f[0]), le32_to_cpu(f[1]));
+
+		ehi->err_mask |= AC_ERR_HSM;
+		ehi->action |= ATA_EH_SOFTRESET;
+		ata_port_freeze(ap);
 
-		pp->ncq_saw_spurious_sdb_cnt++;
 		known_irq = 1;
 	}
 
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index be66ea08da5..f48b4883c93 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.10"
+#define DRV_VERSION "0.2.11"
 
 /*
  *	A generic parallel ATA driver using libata
@@ -90,10 +90,10 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
 			/* We do need the right mode information for DMA or PIO
 			   and this comes from the current configuration flags */
 			if (dma_enabled & (1 << (5 + i))) {
-				dev->xfer_mode = XFER_MW_DMA_0;
-				dev->xfer_shift = ATA_SHIFT_MWDMA;
+				ata_id_to_dma_mode(dev, XFER_MW_DMA_0);
 				dev->flags &= ~ATA_DFLAG_PIO;
 			} else {
+				ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
 				dev->xfer_mode = XFER_PIO_0;
 				dev->xfer_shift = ATA_SHIFT_PIO;
 				dev->flags |= ATA_DFLAG_PIO;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 4d716c7347e..61572d8c78a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -93,7 +93,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"2.00ac7"
+#define DRV_VERSION	"2.10"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
@@ -169,8 +169,6 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
 	/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
 	{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
-	{ 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
-	{ 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* Intel PIIX4 */
 	{ 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
 	/* Intel PIIX4 */
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index b4e8be5d292..d14a48e75f1 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -294,9 +294,8 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix,
 		return 0;
 
 	if (ata_msg_probe(ap))
-		ata_dev_printk(atadev, KERN_DEBUG,
-			"%s: ENTER: ap->id: %d, port#: %d\n",
-			__FUNCTION__, ap->id, ap->port_no);
+		ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+			       __FUNCTION__, ap->port_no);
 
 	if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) {
 		if (ata_msg_probe(ap))
@@ -456,6 +455,9 @@ static void taskfile_load_raw(struct ata_port *ap,
 				struct ata_device *atadev,
 				const struct taskfile_array *gtf)
 {
+	struct ata_taskfile tf;
+	unsigned int err;
+
 	if (ata_msg_probe(ap))
 		ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
 			"%02x %02x %02x %02x %02x %02x %02x\n",
@@ -468,35 +470,25 @@ static void taskfile_load_raw(struct ata_port *ap,
 	    && (gtf->tfa[6] == 0))
 		return;
 
-	if (ap->ops->qc_issue) {
-		struct ata_taskfile tf;
-		unsigned int err;
-
-		ata_tf_init(atadev, &tf);
-
-		/* convert gtf to tf */
-		tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
-		tf.protocol = atadev->class == ATA_DEV_ATAPI ?
-			ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
-		tf.feature = gtf->tfa[0];	/* 0x1f1 */
-		tf.nsect   = gtf->tfa[1];	/* 0x1f2 */
-		tf.lbal    = gtf->tfa[2];	/* 0x1f3 */
-		tf.lbam    = gtf->tfa[3];	/* 0x1f4 */
-		tf.lbah    = gtf->tfa[4];	/* 0x1f5 */
-		tf.device  = gtf->tfa[5];	/* 0x1f6 */
-		tf.command = gtf->tfa[6];	/* 0x1f7 */
-
-		err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0);
-		if (err && ata_msg_probe(ap))
-			ata_dev_printk(atadev, KERN_ERR,
-				"%s: ata_exec_internal failed: %u\n",
-				__FUNCTION__, err);
-	} else
-		if (ata_msg_warn(ap))
-			ata_dev_printk(atadev, KERN_WARNING,
-				"%s: SATA driver is missing qc_issue function"
-				" entry points\n",
-				__FUNCTION__);
+	ata_tf_init(atadev, &tf);
+
+	/* convert gtf to tf */
+	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
+	tf.protocol = atadev->class == ATA_DEV_ATAPI ?
+		ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
+	tf.feature = gtf->tfa[0];	/* 0x1f1 */
+	tf.nsect   = gtf->tfa[1];	/* 0x1f2 */
+	tf.lbal    = gtf->tfa[2];	/* 0x1f3 */
+	tf.lbam    = gtf->tfa[3];	/* 0x1f4 */
+	tf.lbah    = gtf->tfa[4];	/* 0x1f5 */
+	tf.device  = gtf->tfa[5];	/* 0x1f6 */
+	tf.command = gtf->tfa[6];	/* 0x1f7 */
+
+	err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err && ata_msg_probe(ap))
+		ata_dev_printk(atadev, KERN_ERR,
+			"%s: ata_exec_internal failed: %u\n",
+			__FUNCTION__, err);
 }
 
 /**
@@ -521,9 +513,8 @@ static int do_drive_set_taskfiles(struct ata_port *ap,
 	struct taskfile_array	*gtf;
 
 	if (ata_msg_probe(ap))
-		ata_dev_printk(atadev, KERN_DEBUG,
-			"%s: ENTER: ap->id: %d, port#: %d\n",
-			__FUNCTION__, ap->id, ap->port_no);
+		ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+			       __FUNCTION__, ap->port_no);
 
 	if (noacpi || !(ap->cbl == ATA_CBL_SATA))
 		return 0;
@@ -627,9 +618,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
 		return 0;
 
 	if (ata_msg_probe(ap))
-		ata_dev_printk(atadev, KERN_DEBUG,
-			"%s: ap->id: %d, ix = %d, port#: %d\n",
-			__FUNCTION__, ap->id, ix, ap->port_no);
+		ata_dev_printk(atadev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
+			       __FUNCTION__, ix, ap->port_no);
 
 	/* Don't continue if not a SATA device. */
 	if (!(ap->cbl == ATA_CBL_SATA)) {
@@ -685,9 +675,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
 	if (err < 0) {
 		if (ata_msg_probe(ap))
 			ata_dev_printk(atadev, KERN_DEBUG,
-				"ata%u(%u): %s _SDD error: status = 0x%x\n",
-				ap->id, ap->device->devno,
-				__FUNCTION__, status);
+				       "%s _SDD error: status = 0x%x\n",
+				       __FUNCTION__, status);
 	}
 
 	/* always return success */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e900c5edefc..c8d44a7c403 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -59,7 +59,7 @@
 
 #include "libata.h"
 
-#define DRV_VERSION	"2.10"	/* must be exactly four chars */
+#define DRV_VERSION	"2.20"	/* must be exactly four chars */
 
 
 /* debounce timing parameters in msecs { interval, duration, timeout } */
@@ -72,7 +72,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
 static void ata_dev_xfermask(struct ata_device *dev);
 
-static unsigned int ata_unique_id = 1;
+static unsigned int ata_print_id = 1;
 static struct workqueue_struct *ata_wq;
 
 struct workqueue_struct *ata_aux_wq;
@@ -315,9 +315,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
 	tf->flags |= tf_flags;
 
-	if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
-			   ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ &&
-	    likely(tag != ATA_TAG_INTERNAL)) {
+	if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) {
 		/* yay, NCQ */
 		if (!lba_48_ok(block, n_block))
 			return -ERANGE;
@@ -600,6 +598,8 @@ void ata_dev_disable(struct ata_device *dev)
 {
 	if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) {
 		ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+		ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
+					     ATA_DNXFER_QUIET);
 		dev->class++;
 	}
 }
@@ -708,7 +708,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
  *	Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
  */
 
-static unsigned int
+unsigned int
 ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
 {
 	struct ata_taskfile tf;
@@ -824,6 +824,48 @@ static u64 ata_id_n_sectors(const u16 *id)
 }
 
 /**
+ *	ata_id_to_dma_mode	-	Identify DMA mode from id block
+ *	@dev: device to identify
+ *	@mode: mode to assume if we cannot tell
+ *
+ *	Set up the timing values for the device based upon the identify
+ *	reported values for the DMA mode. This function is used by drivers
+ *	which rely upon firmware configured modes, but wish to report the
+ *	mode correctly when possible.
+ *
+ *	In addition we emit similarly formatted messages to the default
+ *	ata_dev_set_mode handler, in order to provide consistency of
+ *	presentation.
+ */
+
+void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown)
+{
+	unsigned int mask;
+	u8 mode;
+
+	/* Pack the DMA modes */
+	mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA;
+	if (dev->id[53] & 0x04)
+		mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA;
+
+	/* Select the mode in use */
+	mode = ata_xfer_mask2mode(mask);
+
+	if (mode != 0) {
+		ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
+		       ata_mode_string(mask));
+	} else {
+		/* SWDMA perhaps ? */
+		mode = unknown;
+		ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
+	}
+
+	/* Configure the device reporting */
+	dev->xfer_mode = mode;
+	dev->xfer_shift = ata_xfer_mode2shift(mode);
+}
+
+/**
  *	ata_noop_dev_select - Select device 0/1 on ATA bus
  *	@ap: ATA channel to manipulate
  *	@device: ATA device (numbered from zero) to select
@@ -891,8 +933,8 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
 			   unsigned int wait, unsigned int can_sleep)
 {
 	if (ata_msg_probe(ap))
-		ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: "
-				"device %u, wait %u\n", ap->id, device, wait);
+		ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
+				"device %u, wait %u\n", device, wait);
 
 	if (wait)
 		ata_wait_idle(ap);
@@ -1392,8 +1434,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	int rc;
 
 	if (ata_msg_ctl(ap))
-		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
-			       __FUNCTION__, ap->id, dev->devno);
+		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
 
 	ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
 
@@ -1430,7 +1471,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	if (err_mask) {
 		if (err_mask & AC_ERR_NODEV_HINT) {
 			DPRINTK("ata%u.%d: NODEV after polling detection\n",
-				ap->id, dev->devno);
+				ap->print_id, dev->devno);
 			return -ENOENT;
 		}
 
@@ -1558,15 +1599,13 @@ int ata_dev_configure(struct ata_device *dev)
 	int rc;
 
 	if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
-		ata_dev_printk(dev, KERN_INFO,
-			       "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n",
-			       __FUNCTION__, ap->id, dev->devno);
+		ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
+			       __FUNCTION__);
 		return 0;
 	}
 
 	if (ata_msg_probe(ap))
-		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
-			       __FUNCTION__, ap->id, dev->devno);
+		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
 
 	/* set _SDD */
 	rc = ata_acpi_push_id(ap, dev->devno);
@@ -1610,8 +1649,9 @@ int ata_dev_configure(struct ata_device *dev)
 	if (dev->class == ATA_DEV_ATA) {
 		if (ata_id_is_cfa(id)) {
 			if (id[162] & 1) /* CPRM may make this media unusable */
-				ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u  supports DRM functions and may not be fully accessable.\n",
-					ap->id, dev->devno);
+				ata_dev_printk(dev, KERN_WARNING,
+					       "supports DRM functions and may "
+					       "not be fully accessable.\n");
 			snprintf(revbuf, 7, "CFA");
 		}
 		else
@@ -1679,7 +1719,7 @@ int ata_dev_configure(struct ata_device *dev)
 					"%s: %s, %s, max %s\n",
 					revbuf,	modelbuf, fwrevbuf,
 					ata_mode_string(xfer_mask));
-				ata_dev_printk(dev, KERN_INFO, 
+				ata_dev_printk(dev, KERN_INFO,
 					"%Lu sectors, multi %u, CHS %u/%u/%u\n",
 					(unsigned long long)dev->n_sectors,
 					dev->multi_count, dev->cylinders,
@@ -1778,7 +1818,7 @@ int ata_bus_probe(struct ata_port *ap)
 {
 	unsigned int classes[ATA_MAX_DEVICES];
 	int tries[ATA_MAX_DEVICES];
-	int i, rc, down_xfermask;
+	int i, rc;
 	struct ata_device *dev;
 
 	ata_port_probe(ap);
@@ -1787,8 +1827,6 @@ int ata_bus_probe(struct ata_port *ap)
 		tries[i] = ATA_PROBE_MAX_TRIES;
 
  retry:
-	down_xfermask = 0;
-
 	/* reset and determine device classes */
 	ap->ops->phy_reset(ap);
 
@@ -1836,10 +1874,8 @@ int ata_bus_probe(struct ata_port *ap)
 
 	/* configure transfer mode */
 	rc = ata_set_mode(ap, &dev);
-	if (rc) {
-		down_xfermask = 1;
+	if (rc)
 		goto fail;
-	}
 
 	for (i = 0; i < ATA_MAX_DEVICES; i++)
 		if (ata_dev_enabled(&ap->device[i]))
@@ -1851,25 +1887,29 @@ int ata_bus_probe(struct ata_port *ap)
 	return -ENODEV;
 
  fail:
+	tries[dev->devno]--;
+
 	switch (rc) {
 	case -EINVAL:
-	case -ENODEV:
+		/* eeek, something went very wrong, give up */
 		tries[dev->devno] = 0;
 		break;
+
+	case -ENODEV:
+		/* give it just one more chance */
+		tries[dev->devno] = min(tries[dev->devno], 1);
 	case -EIO:
-		sata_down_spd_limit(ap);
-		/* fall through */
-	default:
-		tries[dev->devno]--;
-		if (down_xfermask &&
-		    ata_down_xfermask_limit(dev, tries[dev->devno] == 1))
-			tries[dev->devno] = 0;
+		if (tries[dev->devno] == 1) {
+			/* This is the last chance, better to slow
+			 * down than lose it.
+			 */
+			sata_down_spd_limit(ap);
+			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+		}
 	}
 
-	if (!tries[dev->devno]) {
-		ata_down_xfermask_limit(dev, 1);
+	if (!tries[dev->devno])
 		ata_dev_disable(dev);
-	}
 
 	goto retry;
 }
@@ -2300,7 +2340,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 /**
  *	ata_down_xfermask_limit - adjust dev xfer masks downward
  *	@dev: Device to adjust xfer masks
- *	@force_pio0: Force PIO0
+ *	@sel: ATA_DNXFER_* selector
  *
  *	Adjust xfer masks of @dev downward.  Note that this function
  *	does not apply the change.  Invoking ata_set_mode() afterwards
@@ -2312,37 +2352,78 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
  *	RETURNS:
  *	0 on success, negative errno on failure
  */
-int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
+int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
 {
-	unsigned long xfer_mask;
-	int highbit;
+	char buf[32];
+	unsigned int orig_mask, xfer_mask;
+	unsigned int pio_mask, mwdma_mask, udma_mask;
+	int quiet, highbit;
 
-	xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask,
-				      dev->udma_mask);
+	quiet = !!(sel & ATA_DNXFER_QUIET);
+	sel &= ~ATA_DNXFER_QUIET;
 
-	if (!xfer_mask)
-		goto fail;
-	/* don't gear down to MWDMA from UDMA, go directly to PIO */
-	if (xfer_mask & ATA_MASK_UDMA)
-		xfer_mask &= ~ATA_MASK_MWDMA;
+	xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
+						  dev->mwdma_mask,
+						  dev->udma_mask);
+	ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
 
-	highbit = fls(xfer_mask) - 1;
-	xfer_mask &= ~(1 << highbit);
-	if (force_pio0)
-		xfer_mask &= 1 << ATA_SHIFT_PIO;
-	if (!xfer_mask)
-		goto fail;
+	switch (sel) {
+	case ATA_DNXFER_PIO:
+		highbit = fls(pio_mask) - 1;
+		pio_mask &= ~(1 << highbit);
+		break;
+
+	case ATA_DNXFER_DMA:
+		if (udma_mask) {
+			highbit = fls(udma_mask) - 1;
+			udma_mask &= ~(1 << highbit);
+			if (!udma_mask)
+				return -ENOENT;
+		} else if (mwdma_mask) {
+			highbit = fls(mwdma_mask) - 1;
+			mwdma_mask &= ~(1 << highbit);
+			if (!mwdma_mask)
+				return -ENOENT;
+		}
+		break;
+
+	case ATA_DNXFER_40C:
+		udma_mask &= ATA_UDMA_MASK_40C;
+		break;
+
+	case ATA_DNXFER_FORCE_PIO0:
+		pio_mask &= 1;
+	case ATA_DNXFER_FORCE_PIO:
+		mwdma_mask = 0;
+		udma_mask = 0;
+		break;
+
+	default:
+		BUG();
+	}
+
+	xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
+
+	if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
+		return -ENOENT;
+
+	if (!quiet) {
+		if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
+			snprintf(buf, sizeof(buf), "%s:%s",
+				 ata_mode_string(xfer_mask),
+				 ata_mode_string(xfer_mask & ATA_MASK_PIO));
+		else
+			snprintf(buf, sizeof(buf), "%s",
+				 ata_mode_string(xfer_mask));
+
+		ata_dev_printk(dev, KERN_WARNING,
+			       "limiting speed to %s\n", buf);
+	}
 
 	ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
 			    &dev->udma_mask);
 
-	ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n",
-		       ata_mode_string(xfer_mask));
-
 	return 0;
-
- fail:
-	return -EINVAL;
 }
 
 static int ata_dev_set_mode(struct ata_device *dev)
@@ -2609,7 +2690,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 
-	DPRINTK("ata%u: bus reset via SRST\n", ap->id);
+	DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
 
 	/* software reset.  causes dev0 to be selected */
 	iowrite8(ap->ctl, ioaddr->ctl_addr);
@@ -2669,7 +2750,7 @@ void ata_bus_reset(struct ata_port *ap)
 	u8 err;
 	unsigned int dev0, dev1 = 0, devmask = 0;
 
-	DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
+	DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
 
 	/* determine if device 0/1 are present */
 	if (ap->flags & ATA_FLAG_SATA_RESET)
@@ -3256,7 +3337,6 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "WPI CDD-820", 	NULL,		ATA_HORKAGE_NODMA },
 	{ "SAMSUNG CD-ROM SC-148C", NULL,	ATA_HORKAGE_NODMA },
 	{ "SAMSUNG CD-ROM SC",	NULL,		ATA_HORKAGE_NODMA },
-	{ "SanDisk SDP3B-64", 	NULL,		ATA_HORKAGE_NODMA },
 	{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
 	{ "_NEC DV5800A", 	NULL,		ATA_HORKAGE_NODMA },
 	{ "SAMSUNG CD-ROM SN-124","N001",	ATA_HORKAGE_NODMA },
@@ -3739,7 +3819,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
 	struct scatterlist *lsg = &sg[qc->n_elem - 1];
 	int n_elem, pre_n_elem, dir, trim_sg = 0;
 
-	VPRINTK("ENTER, ata%u\n", ap->id);
+	VPRINTK("ENTER, ata%u\n", ap->print_id);
 	WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
 
 	/* we must lengthen transfers to end on a 32-bit boundary */
@@ -4140,7 +4220,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
 	if (do_write != i_write)
 		goto err_out;
 
-	VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes);
+	VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
 
 	__atapi_pio_bytes(qc, bytes);
 
@@ -4257,7 +4337,7 @@ int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
 
 fsm_start:
 	DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
-		ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+		ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
 
 	switch (ap->hsm_task_state) {
 	case HSM_ST_FIRST:
@@ -4290,8 +4370,8 @@ fsm_start:
 		 * let the EH abort the command or reset the device.
 		 */
 		if (unlikely(status & (ATA_ERR | ATA_DF))) {
-			printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
-			       ap->id, status);
+			ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
+					"error, dev_stat 0x%X\n", status);
 			qc->err_mask |= AC_ERR_HSM;
 			ap->hsm_task_state = HSM_ST_ERR;
 			goto fsm_start;
@@ -4348,8 +4428,9 @@ fsm_start:
 			 * let the EH abort the command or reset the device.
 			 */
 			if (unlikely(status & (ATA_ERR | ATA_DF))) {
-				printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
-				       ap->id, status);
+				ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
+						"device error, dev_stat 0x%X\n",
+						status);
 				qc->err_mask |= AC_ERR_HSM;
 				ap->hsm_task_state = HSM_ST_ERR;
 				goto fsm_start;
@@ -4435,7 +4516,7 @@ fsm_start:
 
 		/* no more data to transfer */
 		DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
-			ap->id, qc->dev->devno, status);
+			ap->print_id, qc->dev->devno, status);
 
 		WARN_ON(qc->err_mask);
 
@@ -4977,7 +5058,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
 	u8 status, host_stat = 0;
 
 	VPRINTK("ata%u: protocol %d task_state %d\n",
-		ap->id, qc->tf.protocol, ap->hsm_task_state);
+		ap->print_id, qc->tf.protocol, ap->hsm_task_state);
 
 	/* Check whether we are expecting interrupt in this state */
 	switch (ap->hsm_task_state) {
@@ -4998,7 +5079,8 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
 		    qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
 			/* check status of DMA engine */
 			host_stat = ap->ops->bmdma_status(ap);
-			VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
+			VPRINTK("ata%u: host_stat 0x%X\n",
+				ap->print_id, host_stat);
 
 			/* if it's not our irq... */
 			if (!(host_stat & ATA_DMA_INTR))
@@ -5457,7 +5539,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host,
 
 	ap->lock = &host->lock;
 	ap->flags = ATA_FLAG_DISABLED;
-	ap->id = ata_unique_id++;
+	ap->print_id = ata_print_id++;
 	ap->ctl = ATA_DEVCTL_OBS;
 	ap->host = host;
 	ap->dev = ent->dev;
@@ -5528,7 +5610,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost)
 {
 	ap->scsi_host = shost;
 
-	shost->unique_id = ap->id;
+	shost->unique_id = ap->print_id;
 	shost->max_id = 16;
 	shost->max_lun = 1;
 	shost->max_channel = 1;
@@ -5792,9 +5874,9 @@ int ata_device_add(const struct ata_probe_ent *ent)
 			/* wait for EH to finish */
 			ata_port_wait_eh(ap);
 		} else {
-			DPRINTK("ata%u: bus probe begin\n", ap->id);
+			DPRINTK("ata%u: bus probe begin\n", ap->print_id);
 			rc = ata_bus_probe(ap);
-			DPRINTK("ata%u: bus probe end\n", ap->id);
+			DPRINTK("ata%u: bus probe end\n", ap->print_id);
 
 			if (rc) {
 				/* FIXME: do something useful here?
@@ -5905,11 +5987,7 @@ ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
 {
 	struct ata_probe_ent *probe_ent;
 
-	/* XXX - the following if can go away once all LLDs are managed */
-	if (!list_empty(&dev->devres_head))
-		probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	else
-		probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
 	if (!probe_ent) {
 		printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
 		       kobject_name(&(dev->kobj)));
@@ -6015,11 +6093,10 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
 void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
 	pci_save_state(pdev);
+	pci_disable_device(pdev);
 
-	if (mesg.event == PM_EVENT_SUSPEND) {
-		pci_disable_device(pdev);
+	if (mesg.event == PM_EVENT_SUSPEND)
 		pci_set_power_state(pdev, PCI_D3hot);
-	}
 }
 
 int ata_pci_device_do_resume(struct pci_dev *pdev)
@@ -6241,6 +6318,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
 EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
 EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
 EXPORT_SYMBOL_GPL(ata_port_probe);
+EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_phy_debounce);
 EXPORT_SYMBOL_GPL(sata_phy_resume);
@@ -6275,6 +6353,7 @@ EXPORT_SYMBOL_GPL(ata_host_suspend);
 EXPORT_SYMBOL_GPL(ata_host_resume);
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
 EXPORT_SYMBOL_GPL(ata_device_blacklisted);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
@@ -6311,3 +6390,4 @@ EXPORT_SYMBOL_GPL(ata_irq_on);
 EXPORT_SYMBOL_GPL(ata_dummy_irq_on);
 EXPORT_SYMBOL_GPL(ata_irq_ack);
 EXPORT_SYMBOL_GPL(ata_dummy_irq_ack);
+EXPORT_SYMBOL_GPL(ata_dev_try_classify);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 52c85af7fe9..cad0d6db6df 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -44,6 +44,12 @@
 
 #include "libata.h"
 
+enum {
+	ATA_EH_SPDN_NCQ_OFF		= (1 << 0),
+	ATA_EH_SPDN_SPEED_DOWN		= (1 << 1),
+	ATA_EH_SPDN_FALLBACK_TO_PIO	= (1 << 2),
+};
+
 static void __ata_port_freeze(struct ata_port *ap);
 static void ata_eh_finish(struct ata_port *ap);
 static void ata_eh_handle_port_suspend(struct ata_port *ap);
@@ -65,12 +71,9 @@ static void ata_ering_record(struct ata_ering *ering, int is_io,
 	ent->timestamp = get_jiffies_64();
 }
 
-static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering)
+static void ata_ering_clear(struct ata_ering *ering)
 {
-	struct ata_ering_entry *ent = &ering->ring[ering->cursor];
-	if (!ent->err_mask)
-		return NULL;
-	return ent;
+	memset(ering, 0, sizeof(*ering));
 }
 
 static int ata_ering_map(struct ata_ering *ering,
@@ -585,7 +588,7 @@ static void __ata_port_freeze(struct ata_port *ap)
 
 	ap->pflags |= ATA_PFLAG_FROZEN;
 
-	DPRINTK("ata%u port frozen\n", ap->id);
+	DPRINTK("ata%u port frozen\n", ap->print_id);
 }
 
 /**
@@ -658,7 +661,7 @@ void ata_eh_thaw_port(struct ata_port *ap)
 
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	DPRINTK("ata%u port thawed\n", ap->id);
+	DPRINTK("ata%u port thawed\n", ap->print_id);
 }
 
 static void ata_eh_scsidone(struct scsi_cmnd *scmd)
@@ -1159,87 +1162,99 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 	return action;
 }
 
-static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent)
+static int ata_eh_categorize_error(int is_io, unsigned int err_mask)
 {
-	if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT))
+	if (err_mask & AC_ERR_ATA_BUS)
 		return 1;
 
-	if (ent->is_io) {
-		if (ent->err_mask & AC_ERR_HSM)
-			return 1;
-		if ((ent->err_mask &
-		     (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
+	if (err_mask & AC_ERR_TIMEOUT)
+		return 2;
+
+	if (is_io) {
+		if (err_mask & AC_ERR_HSM)
 			return 2;
+		if ((err_mask &
+		     (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
+			return 3;
 	}
 
 	return 0;
 }
 
-struct speed_down_needed_arg {
+struct speed_down_verdict_arg {
 	u64 since;
-	int nr_errors[3];
+	int nr_errors[4];
 };
 
-static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg)
+static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
 {
-	struct speed_down_needed_arg *arg = void_arg;
+	struct speed_down_verdict_arg *arg = void_arg;
+	int cat = ata_eh_categorize_error(ent->is_io, ent->err_mask);
 
 	if (ent->timestamp < arg->since)
 		return -1;
 
-	arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++;
+	arg->nr_errors[cat]++;
 	return 0;
 }
 
 /**
- *	ata_eh_speed_down_needed - Determine wheter speed down is necessary
+ *	ata_eh_speed_down_verdict - Determine speed down verdict
  *	@dev: Device of interest
  *
  *	This function examines error ring of @dev and determines
- *	whether speed down is necessary.  Speed down is necessary if
- *	there have been more than 3 of Cat-1 errors or 10 of Cat-2
- *	errors during last 15 minutes.
+ *	whether NCQ needs to be turned off, transfer speed should be
+ *	stepped down, or falling back to PIO is necessary.
  *
- *	Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM
- *	violation for known supported commands.
+ *	Cat-1 is ATA_BUS error for any command.
  *
- *	Cat-2 errors are unclassified DEV error for known supported
+ *	Cat-2 is TIMEOUT for any command or HSM violation for known
+ *	supported commands.
+ *
+ *	Cat-3 is is unclassified DEV error for known supported
  *	command.
  *
+ *	NCQ needs to be turned off if there have been more than 3
+ *	Cat-2 + Cat-3 errors during last 10 minutes.
+ *
+ *	Speed down is necessary if there have been more than 3 Cat-1 +
+ *	Cat-2 errors or 10 Cat-3 errors during last 10 minutes.
+ *
+ *	Falling back to PIO mode is necessary if there have been more
+ *	than 10 Cat-1 + Cat-2 + Cat-3 errors during last 5 minutes.
+ *
  *	LOCKING:
  *	Inherited from caller.
  *
  *	RETURNS:
- *	1 if speed down is necessary, 0 otherwise
+ *	OR of ATA_EH_SPDN_* flags.
  */
-static int ata_eh_speed_down_needed(struct ata_device *dev)
+static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
 {
-	const u64 interval = 15LLU * 60 * HZ;
-	static const int err_limits[3] = { -1, 3, 10 };
-	struct speed_down_needed_arg arg;
-	struct ata_ering_entry *ent;
-	int err_cat;
-	u64 j64;
+	const u64 j5mins = 5LLU * 60 * HZ, j10mins = 10LLU * 60 * HZ;
+	u64 j64 = get_jiffies_64();
+	struct speed_down_verdict_arg arg;
+	unsigned int verdict = 0;
 
-	ent = ata_ering_top(&dev->ering);
-	if (!ent)
-		return 0;
+	/* scan past 10 mins of error history */
+	memset(&arg, 0, sizeof(arg));
+	arg.since = j64 - min(j64, j10mins);
+	ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
 
-	err_cat = ata_eh_categorize_ering_entry(ent);
-	if (err_cat == 0)
-		return 0;
+	if (arg.nr_errors[2] + arg.nr_errors[3] > 3)
+		verdict |= ATA_EH_SPDN_NCQ_OFF;
+	if (arg.nr_errors[1] + arg.nr_errors[2] > 3 || arg.nr_errors[3] > 10)
+		verdict |= ATA_EH_SPDN_SPEED_DOWN;
 
+	/* scan past 3 mins of error history */
 	memset(&arg, 0, sizeof(arg));
+	arg.since = j64 - min(j64, j5mins);
+	ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
 
-	j64 = get_jiffies_64();
-	if (j64 >= interval)
-		arg.since = j64 - interval;
-	else
-		arg.since = 0;
-
-	ata_ering_map(&dev->ering, speed_down_needed_cb, &arg);
+	if (arg.nr_errors[1] + arg.nr_errors[2] + arg.nr_errors[3] > 10)
+		verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
 
-	return arg.nr_errors[err_cat] > err_limits[err_cat];
+	return verdict;
 }
 
 /**
@@ -1257,31 +1272,80 @@ static int ata_eh_speed_down_needed(struct ata_device *dev)
  *	Kernel thread context (may sleep).
  *
  *	RETURNS:
- *	0 on success, -errno otherwise
+ *	Determined recovery action.
  */
-static int ata_eh_speed_down(struct ata_device *dev, int is_io,
-			     unsigned int err_mask)
+static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
+				      unsigned int err_mask)
 {
-	if (!err_mask)
+	unsigned int verdict;
+	unsigned int action = 0;
+
+	/* don't bother if Cat-0 error */
+	if (ata_eh_categorize_error(is_io, err_mask) == 0)
 		return 0;
 
 	/* record error and determine whether speed down is necessary */
 	ata_ering_record(&dev->ering, is_io, err_mask);
+	verdict = ata_eh_speed_down_verdict(dev);
 
-	if (!ata_eh_speed_down_needed(dev))
-		return 0;
+	/* turn off NCQ? */
+	if ((verdict & ATA_EH_SPDN_NCQ_OFF) &&
+	    (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ |
+			   ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) {
+		dev->flags |= ATA_DFLAG_NCQ_OFF;
+		ata_dev_printk(dev, KERN_WARNING,
+			       "NCQ disabled due to excessive errors\n");
+		goto done;
+	}
 
-	/* speed down SATA link speed if possible */
-	if (sata_down_spd_limit(dev->ap) == 0)
-		return ATA_EH_HARDRESET;
+	/* speed down? */
+	if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
+		/* speed down SATA link speed if possible */
+		if (sata_down_spd_limit(dev->ap) == 0) {
+			action |= ATA_EH_HARDRESET;
+			goto done;
+		}
 
-	/* lower transfer mode */
-	if (ata_down_xfermask_limit(dev, 0) == 0)
-		return ATA_EH_SOFTRESET;
+		/* lower transfer mode */
+		if (dev->spdn_cnt < 2) {
+			static const int dma_dnxfer_sel[] =
+				{ ATA_DNXFER_DMA, ATA_DNXFER_40C };
+			static const int pio_dnxfer_sel[] =
+				{ ATA_DNXFER_PIO, ATA_DNXFER_FORCE_PIO0 };
+			int sel;
+
+			if (dev->xfer_shift != ATA_SHIFT_PIO)
+				sel = dma_dnxfer_sel[dev->spdn_cnt];
+			else
+				sel = pio_dnxfer_sel[dev->spdn_cnt];
+
+			dev->spdn_cnt++;
+
+			if (ata_down_xfermask_limit(dev, sel) == 0) {
+				action |= ATA_EH_SOFTRESET;
+				goto done;
+			}
+		}
+	}
+
+	/* Fall back to PIO?  Slowing down to PIO is meaningless for
+	 * SATA.  Consider it only for PATA.
+	 */
+	if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
+	    (dev->ap->cbl != ATA_CBL_SATA) &&
+	    (dev->xfer_shift != ATA_SHIFT_PIO)) {
+		if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
+			dev->spdn_cnt = 0;
+			action |= ATA_EH_SOFTRESET;
+			goto done;
+		}
+	}
 
-	ata_dev_printk(dev, KERN_ERR,
-		       "speed down requested but no transfer mode left\n");
 	return 0;
+ done:
+	/* device has been slowed down, blow error history */
+	ata_ering_clear(&dev->ering);
+	return action;
 }
 
 /**
@@ -1964,7 +2028,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 {
 	struct ata_eh_context *ehc = &ap->eh_context;
 	struct ata_device *dev;
-	int down_xfermask, i, rc;
+	int i, rc;
 
 	DPRINTK("ENTER\n");
 
@@ -1993,7 +2057,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	}
 
  retry:
-	down_xfermask = 0;
 	rc = 0;
 
 	/* if UNLOADING, finish immediately */
@@ -2038,10 +2101,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	/* configure transfer mode if necessary */
 	if (ehc->i.flags & ATA_EHI_SETMODE) {
 		rc = ata_set_mode(ap, &dev);
-		if (rc) {
-			down_xfermask = 1;
+		if (rc)
 			goto dev_fail;
-		}
 		ehc->i.flags &= ~ATA_EHI_SETMODE;
 	}
 
@@ -2053,20 +2114,27 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	goto out;
 
  dev_fail:
+	ehc->tries[dev->devno]--;
+
 	switch (rc) {
-	case -ENODEV:
-		/* device missing, schedule probing */
-		ehc->i.probe_mask |= (1 << dev->devno);
 	case -EINVAL:
+		/* eeek, something went very wrong, give up */
 		ehc->tries[dev->devno] = 0;
 		break;
+
+	case -ENODEV:
+		/* device missing or wrong IDENTIFY data, schedule probing */
+		ehc->i.probe_mask |= (1 << dev->devno);
+		/* give it just one more chance */
+		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
 	case -EIO:
-		sata_down_spd_limit(ap);
-	default:
-		ehc->tries[dev->devno]--;
-		if (down_xfermask &&
-		    ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1))
-			ehc->tries[dev->devno] = 0;
+		if (ehc->tries[dev->devno] == 1) {
+			/* This is the last chance, better to slow
+			 * down than lose it.
+			 */
+			sata_down_spd_limit(ap);
+			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+		}
 	}
 
 	if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0009818a430..00a9a6c8f83 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -333,6 +333,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
 	scsi_cmd[8]  = args[3];
 	scsi_cmd[10] = args[4];
 	scsi_cmd[12] = args[5];
+	scsi_cmd[13] = args[6] & 0x0f;
 	scsi_cmd[14] = args[0];
 
 	/* Good values for timeout and retries?  Values below
@@ -781,7 +782,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 	 */
 	if (qc->err_mask ||
 	    tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
-		ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+		ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
 				   &sb[1], &sb[2], &sb[3], verbose);
 		sb[1] &= 0x0f;
 	}
@@ -854,7 +855,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
 	 */
 	if (qc->err_mask ||
 	    tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
-		ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+		ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
 				   &sb[1], &sb[2], &sb[3], verbose);
 		sb[1] &= 0x0f;
 	}
@@ -986,29 +987,32 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
 	unsigned long flags;
-	int max_depth;
 
-	if (queue_depth < 1)
+	if (queue_depth < 1 || queue_depth == sdev->queue_depth)
 		return sdev->queue_depth;
 
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev || !ata_dev_enabled(dev))
 		return sdev->queue_depth;
 
-	max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
-	max_depth = min(ATA_MAX_QUEUE - 1, max_depth);
-	if (queue_depth > max_depth)
-		queue_depth = max_depth;
-
-	scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
-
+	/* NCQ enabled? */
 	spin_lock_irqsave(ap->lock, flags);
-	if (queue_depth > 1)
-		dev->flags &= ~ATA_DFLAG_NCQ_OFF;
-	else
+	dev->flags &= ~ATA_DFLAG_NCQ_OFF;
+	if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
 		dev->flags |= ATA_DFLAG_NCQ_OFF;
+		queue_depth = 1;
+	}
 	spin_unlock_irqrestore(ap->lock, flags);
 
+	/* limit and apply queue depth */
+	queue_depth = min(queue_depth, sdev->host->can_queue);
+	queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
+	queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1);
+
+	if (sdev->queue_depth == queue_depth)
+		return -EINVAL;
+
+	scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
 	return queue_depth;
 }
 
@@ -1469,7 +1473,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 	}
 
 	if (need_sense && !ap->ops->error_handler)
-		ata_dump_status(ap->id, &qc->result_tf);
+		ata_dump_status(ap->print_id, &qc->result_tf);
 
 	qc->scsidone(cmd);
 
@@ -1495,11 +1499,9 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 static int ata_scmd_need_defer(struct ata_device *dev, int is_io)
 {
 	struct ata_port *ap = dev->ap;
+	int is_ncq = is_io && ata_ncq_enabled(dev);
 
-	if (!(dev->flags & ATA_DFLAG_NCQ))
-		return 0;
-
-	if (is_io) {
+	if (is_ncq) {
 		if (!ata_tag_valid(ap->active_tag))
 			return 0;
 	} else {
@@ -2774,7 +2776,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
 	u8 *scsicmd = cmd->cmnd;
 
 	DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
-		ap->id,
+		ap->print_id,
 		scsidev->channel, scsidev->id, scsidev->lun,
 		scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
 		scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
@@ -3234,7 +3236,7 @@ struct ata_port *ata_sas_port_alloc(struct ata_host *host,
 
 	ata_port_init(ap, host, ent, 0);
 	ap->lock = shost->host_lock;
-	kfree(ent);
+	devm_kfree(host->dev, ent);
 	return ap;
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 16bc3e35bdd..2ffcca063d8 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -175,7 +175,7 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
  */
 void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
 {
-	DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
 
 	iowrite8(tf->command, ap->ioaddr.command_addr);
 	ata_pause(ap);
@@ -521,7 +521,7 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
 static int ata_resources_present(struct pci_dev *pdev, int port)
 {
 	int i;
-	
+
 	/* Check the PCI resources for this channel are enabled */
 	port = port * 2;
 	for (i = 0; i < 2; i ++) {
@@ -531,7 +531,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
 	}
 	return 1;
 }
-		
+
 /**
  *	ata_pci_init_native_mode - Initialize native-mode driver
  *	@pdev:  pci device to be initialized
@@ -576,7 +576,7 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
 
 	probe_ent->irq = pdev->irq;
 	probe_ent->irq_flags = IRQF_SHARED;
-	
+
 	/* Discard disabled ports. Some controllers show their
 	   unused channels this way */
 	if (ata_resources_present(pdev, 0) == 0)
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 0ad7781d72a..c42671493e8 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -41,6 +41,15 @@ struct ata_scsi_args {
 enum {
 	/* flags for ata_dev_read_id() */
 	ATA_READID_POSTRESET	= (1 << 0), /* reading ID after reset */
+
+	/* selector for ata_down_xfermask_limit() */
+	ATA_DNXFER_PIO		= 0,	/* speed down PIO */
+	ATA_DNXFER_DMA		= 1,	/* speed down DMA */
+	ATA_DNXFER_40C		= 2,	/* apply 40c cable limit */
+	ATA_DNXFER_FORCE_PIO	= 3,	/* force PIO */
+	ATA_DNXFER_FORCE_PIO0	= 4,	/* force PIO0 */
+
+	ATA_DNXFER_QUIET	= (1 << 31),
 };
 
 extern struct workqueue_struct *ata_aux_wq;
@@ -69,7 +78,7 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
 extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_port *ap);
 extern int sata_set_spd_needed(struct ata_port *ap);
-extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);
+extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);
@@ -150,7 +159,5 @@ extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
 /* libata-sff.c */
 extern u8 ata_irq_on(struct ata_port *ap);
 
-/* pata_sis.c */
-extern struct ata_port_info sis_info133;
 
 #endif /* __LIBATA_H__ */
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index ab44d18850f..a90ed00c07e 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.3"
 
 /*
  *	Cable special cases
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 619e44b0403..3c760d0f471 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -128,7 +128,7 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
 
 static int amd_pre_reset(struct ata_port *ap)
 {
-	static const u32 bitmask[2] = {0x03, 0xC0};
+	static const u32 bitmask[2] = {0x03, 0x0C};
 	static const struct pci_bits amd_enable_bits[] = {
 		{ 0x40, 1, 0x02, 0x02 },
 		{ 0x40, 1, 0x01, 0x01 }
@@ -247,7 +247,7 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  */
 
 static int nv_pre_reset(struct ata_port *ap) {
-	static const u8 bitmask[2] = {0x03, 0xC0};
+	static const u8 bitmask[2] = {0x03, 0x0C};
 	static const struct pci_bits nv_enable_bits[] = {
 		{ 0x50, 1, 0x02, 0x02 },
 		{ 0x50, 1, 0x01, 0x01 }
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 1ce8fcfd782..c1334c6c415 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_cs5520"
-#define DRV_VERSION	"0.6.3"
+#define DRV_VERSION	"0.6.4"
 
 struct pio_clocks
 {
@@ -325,6 +325,30 @@ static int cs5520_reinit_one(struct pci_dev *pdev)
 		pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
 	return ata_pci_device_resume(pdev);
 }
+
+/**
+ *	cs5520_pci_device_suspend	-	device suspend
+ *	@pdev: PCI device
+ *
+ *	We have to cut and waste bits from the standard method because
+ *	the 5520 is a bit odd and not just a pure ATA device. As a result
+ *	we must not disable it. The needed code is short and this avoids
+ *	chip specific mess in the core code.
+ */
+
+static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc = 0;
+
+	rc = ata_host_suspend(host, mesg);
+	if (rc)
+		return rc;
+
+	pci_save_state(pdev);
+	return 0;
+}
+
 /* For now keep DMA off. We can set it for all but A rev CS5510 once the
    core ATA code can handle it */
 
@@ -340,7 +364,7 @@ static struct pci_driver cs5520_pci_driver = {
 	.id_table	= pata_cs5520,
 	.probe 		= cs5520_init_one,
 	.remove		= cs5520_remove_one,
-	.suspend	= ata_pci_device_suspend,
+	.suspend	= cs5520_pci_device_suspend,
 	.resume		= cs5520_reinit_one,
 };
 
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 3d7b7d87ec6..78c7cdfff69 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"pata_cs5530"
-#define DRV_VERSION	"0.7.1"
+#define DRV_VERSION	"0.7.2"
 
 static void __iomem *cs5530_port_base(struct ata_port *ap)
 {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 27d724b5eea..e7d33c628a6 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.5.3"
+#define DRV_VERSION	"0.6.0"
 
 struct hpt_clock {
 	u8	xfer_speed;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 4ffc392052c..f331eeeafa0 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.5.2"
+#define DRV_VERSION	"0.6.0"
 
 struct hpt_clock {
 	u8	xfer_speed;
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 1bf5ec18b2e..d5f2e85e28f 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -17,7 +17,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.1.5"
+#define DRV_VERSION "0.2.0"
 
 static struct scsi_host_template isapnp_sht = {
 	.module			= THIS_MODULE,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 73394c75be4..903137a6da5 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
 
 struct it821x_dev
 {
@@ -503,10 +503,12 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused
 			/* We do need the right mode information for DMA or PIO
 			   and this comes from the current configuration flags */
 			if (dma_enabled & (1 << (5 + i))) {
+				ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
 				dev->xfer_mode = XFER_MW_DMA_0;
 				dev->xfer_shift = ATA_SHIFT_MWDMA;
 				dev->flags &= ~ATA_DFLAG_PIO;
 			} else {
+				ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
 				dev->xfer_mode = XFER_PIO_0;
 				dev->xfer_shift = ATA_SHIFT_PIO;
 				dev->flags |= ATA_DFLAG_PIO;
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 3222ac7b945..9a0523b5c94 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -23,15 +23,16 @@
 #include <scsi/scsi_host.h>
 
 #define DRV_NAME	"pata_ixp4xx_cf"
-#define DRV_VERSION	"0.1.1ac1"
+#define DRV_VERSION	"0.1.2"
 
-static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device *adev)
+static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 {
 	int i;
 
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
-		if (ata_dev_enabled(dev)) {
+		if (ata_dev_ready(dev)) {
+			ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
 			dev->pio_mode = XFER_PIO_0;
 			dev->xfer_mode = XFER_PIO_0;
 			dev->xfer_shift = ATA_SHIFT_PIO;
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 98c1fee4b30..6ee61c67163 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -64,7 +64,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.5.4"
 
 #define NR_HOST 6
 
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 45215aa05e7..2389107a200 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_oldpiix"
-#define DRV_VERSION	"0.5.3"
+#define DRV_VERSION	"0.5.4"
 
 /**
  *	oldpiix_pre_reset		-	probe begin
@@ -209,10 +209,9 @@ static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
 	struct ata_device *adev = qc->dev;
 
 	if (adev != ap->private_data) {
+		oldpiix_set_piomode(ap, adev);
 		if (adev->dma_mode)
 			oldpiix_set_dmamode(ap, adev);
-		else if (adev->pio_mode)
-			oldpiix_set_piomode(ap, adev);
 	}
 	return ata_qc_issue_prot(qc);
 }
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index da1aa148b37..1b3cd5369f0 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index d80b36e209c..b76c976e505 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 8928a6dfac5..103720f873c 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.3.0"
 
 /*
  *	Private data structure to glue stuff together
@@ -319,14 +319,17 @@ static void pcmcia_remove_one(struct pcmcia_device *pdev)
 static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_FUNC_ID(4),
 	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
+	PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),	/* I-O Data CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
-	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
+	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
  	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
 	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
-	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar */
+	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),	/* Viking CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar, Viking CFA */
 	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
 	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 61537873d28..93bcdadb7be 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_pdc2027x"
-#define DRV_VERSION	"0.74-ac5"
+#define DRV_VERSION	"0.8"
 #undef PDC_DEBUG
 
 #ifdef PDC_DEBUG
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 6dd63413a52..80685388c2b 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -21,7 +21,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.3.0"
 
 /**
  *	pdc2024x_pre_reset		-	probe begin
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 479a326114e..02ea95fcba6 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -42,6 +42,7 @@ static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unuse
 			dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
 			dev->xfer_shift = ATA_SHIFT_PIO;
 			dev->flags |= ATA_DFLAG_PIO;
+			ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
 		}
 	}
 	return 0;
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 4362141976a..c2f87da6033 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.3.0"
 
 #define NR_HOST 4	/* Two 6580s */
 
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 71a2bac09e0..60fc598f765 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -71,6 +71,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
 			dev->xfer_mode = XFER_PIO_0;
 			dev->xfer_shift = ATA_SHIFT_PIO;
 			dev->flags |= ATA_DFLAG_PIO;
+			ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
 		}
 	}
 	return 0;
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
new file mode 100644
index 00000000000..45866098fbf
--- /dev/null
+++ b/drivers/ata/pata_scc.c
@@ -0,0 +1,1228 @@
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ata/ata_piix.c:
+ *  Copyright 2003-2005 Red Hat Inc
+ *  Copyright 2003-2005 Jeff Garzik
+ *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
+ *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *
+ * and drivers/ata/ahci.c:
+ *  Copyright 2004-2005 Red Hat, Inc.
+ *
+ * and drivers/ata/libata-core.c:
+ *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+ *  Copyright 2003-2004 Jeff Garzik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME		"pata_scc"
+#define DRV_VERSION		"0.1"
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA		0x01b4
+
+/* PCI BARs */
+#define SCC_CTRL_BAR		0
+#define SCC_BMID_BAR		1
+
+/* offset of CTRL registers */
+#define SCC_CTL_PIOSHT		0x000
+#define SCC_CTL_PIOCT		0x004
+#define SCC_CTL_MDMACT		0x008
+#define SCC_CTL_MCRCST		0x00C
+#define SCC_CTL_SDMACT		0x010
+#define SCC_CTL_SCRCST		0x014
+#define SCC_CTL_UDENVT		0x018
+#define SCC_CTL_TDVHSEL 	0x020
+#define SCC_CTL_MODEREG 	0x024
+#define SCC_CTL_ECMODE		0xF00
+#define SCC_CTL_MAEA0		0xF50
+#define SCC_CTL_MAEC0		0xF54
+#define SCC_CTL_CCKCTRL 	0xFF0
+
+/* offset of BMID registers */
+#define SCC_DMA_CMD		0x000
+#define SCC_DMA_STATUS		0x004
+#define SCC_DMA_TABLE_OFS	0x008
+#define SCC_DMA_INTMASK 	0x010
+#define SCC_DMA_INTST		0x014
+#define SCC_DMA_PTERADD 	0x018
+#define SCC_REG_CMD_ADDR	0x020
+#define SCC_REG_DATA		0x000
+#define SCC_REG_ERR		0x004
+#define SCC_REG_FEATURE 	0x004
+#define SCC_REG_NSECT		0x008
+#define SCC_REG_LBAL		0x00C
+#define SCC_REG_LBAM		0x010
+#define SCC_REG_LBAH		0x014
+#define SCC_REG_DEVICE		0x018
+#define SCC_REG_STATUS		0x01C
+#define SCC_REG_CMD		0x01C
+#define SCC_REG_ALTSTATUS	0x020
+
+/* register value */
+#define TDVHSEL_MASTER		0x00000001
+#define TDVHSEL_SLAVE		0x00000004
+
+#define MODE_JCUSFEN		0x00000080
+
+#define ECMODE_VALUE		0x01
+
+#define CCKCTRL_ATARESET	0x00040000
+#define CCKCTRL_BUFCNT		0x00020000
+#define CCKCTRL_CRST		0x00010000
+#define CCKCTRL_OCLKEN		0x00000100
+#define CCKCTRL_ATACLKOEN	0x00000002
+#define CCKCTRL_LCLKEN		0x00000001
+
+#define QCHCD_IOS_SS		0x00000001
+
+#define QCHSD_STPDIAG		0x00020000
+
+#define INTMASK_MSK		0xD1000012
+#define INTSTS_SERROR		0x80000000
+#define INTSTS_PRERR		0x40000000
+#define INTSTS_RERR		0x10000000
+#define INTSTS_ICERR		0x01000000
+#define INTSTS_BMSINT		0x00000010
+#define INTSTS_BMHE		0x00000008
+#define INTSTS_IOIRQS		0x00000004
+#define INTSTS_INTRQ		0x00000002
+#define INTSTS_ACTEINT		0x00000001
+
+
+/* PIO transfer mode table */
+/* JCHST */
+static const unsigned long JCHSTtbl[2][7] = {
+	{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00},	/* 100MHz */
+	{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00}	/* 133MHz */
+};
+
+/* JCHHT */
+static const unsigned long JCHHTtbl[2][7] = {
+	{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00},	/* 100MHz */
+	{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00}	/* 133MHz */
+};
+
+/* JCHCT */
+static const unsigned long JCHCTtbl[2][7] = {
+	{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00},	/* 100MHz */
+	{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00}	/* 133MHz */
+};
+
+/* DMA transfer mode  table */
+/* JCHDCTM/JCHDCTS */
+static const unsigned long JCHDCTxtbl[2][7] = {
+	{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00},	/* 100MHz */
+	{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00}	/* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS  */
+static const unsigned long JCSTWTxtbl[2][7] = {
+	{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00},	/* 100MHz */
+	{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02}	/* 133MHz */
+};
+
+/* JCTSS */
+static const unsigned long JCTSStbl[2][7] = {
+	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00},	/* 100MHz */
+	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05}	/* 133MHz */
+};
+
+/* JCENVT */
+static const unsigned long JCENVTtbl[2][7] = {
+	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00},	/* 100MHz */
+	{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02}	/* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static const unsigned long JCACTSELtbl[2][7] = {
+	{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00},	/* 100MHz */
+	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}	/* 133MHz */
+};
+
+static const struct pci_device_id scc_pci_tbl[] = {
+	{PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ }	/* terminate list */
+};
+
+/**
+ *	scc_set_piomode - Initialize host controller PATA PIO timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: um
+ *
+ *	Set PIO mode for device.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+	unsigned int pio = adev->pio_mode - XFER_PIO_0;
+	void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
+	void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
+	void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT;
+	void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT;
+	unsigned long reg;
+	int offset;
+
+	reg = in_be32(cckctrl_port);
+	if (reg & CCKCTRL_ATACLKOEN)
+		offset = 1;	/* 133MHz */
+	else
+		offset = 0;	/* 100MHz */
+
+	reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
+	out_be32(piosht_port, reg);
+	reg = JCHCTtbl[offset][pio];
+	out_be32(pioct_port, reg);
+}
+
+/**
+ *	scc_set_dmamode - Initialize host controller PATA DMA timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: um
+ *	@udma: udma mode, 0 - 6
+ *
+ *	Set UDMA mode for device.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+	unsigned int udma = adev->dma_mode;
+	unsigned int is_slave = (adev->devno != 0);
+	u8 speed = udma;
+	void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
+	void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
+	void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT;
+	void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST;
+	void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT;
+	void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST;
+	void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT;
+	void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL;
+	int offset, idx;
+
+	if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
+		offset = 1;	/* 133MHz */
+	else
+		offset = 0;	/* 100MHz */
+
+	if (speed >= XFER_UDMA_0)
+		idx = speed - XFER_UDMA_0;
+	else
+		return;
+
+	if (is_slave) {
+		out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
+		out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
+		out_be32(tdvhsel_port,
+			 (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
+	} else {
+		out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
+		out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
+		out_be32(tdvhsel_port,
+			 (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
+	}
+	out_be32(udenvt_port,
+		 JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
+}
+
+/**
+ *	scc_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Note: Original code is ata_tf_load().
+ */
+
+static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		out_be32(ioaddr->ctl_addr, tf->ctl);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		out_be32(ioaddr->feature_addr, tf->hob_feature);
+		out_be32(ioaddr->nsect_addr, tf->hob_nsect);
+		out_be32(ioaddr->lbal_addr, tf->hob_lbal);
+		out_be32(ioaddr->lbam_addr, tf->hob_lbam);
+		out_be32(ioaddr->lbah_addr, tf->hob_lbah);
+		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->hob_feature,
+			tf->hob_nsect,
+			tf->hob_lbal,
+			tf->hob_lbam,
+			tf->hob_lbah);
+	}
+
+	if (is_addr) {
+		out_be32(ioaddr->feature_addr, tf->feature);
+		out_be32(ioaddr->nsect_addr, tf->nsect);
+		out_be32(ioaddr->lbal_addr, tf->lbal);
+		out_be32(ioaddr->lbam_addr, tf->lbam);
+		out_be32(ioaddr->lbah_addr, tf->lbah);
+		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		out_be32(ioaddr->device_addr, tf->device);
+		VPRINTK("device 0x%X\n", tf->device);
+	}
+
+	ata_wait_idle(ap);
+}
+
+/**
+ *	scc_check_status - Read device status reg & clear interrupt
+ *	@ap: port where the device is
+ *
+ *	Note: Original code is ata_check_status().
+ */
+
+static u8 scc_check_status (struct ata_port *ap)
+{
+	return in_be32(ap->ioaddr.status_addr);
+}
+
+/**
+ *	scc_tf_read - input device's ATA taskfile shadow registers
+ *	@ap: Port from which input is read
+ *	@tf: ATA taskfile register set for storing input
+ *
+ *	Note: Original code is ata_tf_read().
+ */
+
+static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	tf->command = scc_check_status(ap);
+	tf->feature = in_be32(ioaddr->error_addr);
+	tf->nsect = in_be32(ioaddr->nsect_addr);
+	tf->lbal = in_be32(ioaddr->lbal_addr);
+	tf->lbam = in_be32(ioaddr->lbam_addr);
+	tf->lbah = in_be32(ioaddr->lbah_addr);
+	tf->device = in_be32(ioaddr->device_addr);
+
+	if (tf->flags & ATA_TFLAG_LBA48) {
+		out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
+		tf->hob_feature = in_be32(ioaddr->error_addr);
+		tf->hob_nsect = in_be32(ioaddr->nsect_addr);
+		tf->hob_lbal = in_be32(ioaddr->lbal_addr);
+		tf->hob_lbam = in_be32(ioaddr->lbam_addr);
+		tf->hob_lbah = in_be32(ioaddr->lbah_addr);
+	}
+}
+
+/**
+ *	scc_exec_command - issue ATA command to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Note: Original code is ata_exec_command().
+ */
+
+static void scc_exec_command (struct ata_port *ap,
+			      const struct ata_taskfile *tf)
+{
+	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+
+	out_be32(ap->ioaddr.command_addr, tf->command);
+	ata_pause(ap);
+}
+
+/**
+ *	scc_check_altstatus - Read device alternate status reg
+ *	@ap: port where the device is
+ */
+
+static u8 scc_check_altstatus (struct ata_port *ap)
+{
+	return in_be32(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ *	scc_std_dev_select - Select device 0/1 on ATA bus
+ *	@ap: ATA channel to manipulate
+ *	@device: ATA device (numbered from zero) to select
+ *
+ *	Note: Original code is ata_std_dev_select().
+ */
+
+static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
+{
+	u8 tmp;
+
+	if (device == 0)
+		tmp = ATA_DEVICE_OBS;
+	else
+		tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+	out_be32(ap->ioaddr.device_addr, tmp);
+	ata_pause(ap);
+}
+
+/**
+ *	scc_bmdma_setup - Set up PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Note: Original code is ata_bmdma_setup().
+ */
+
+static void scc_bmdma_setup (struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+	u8 dmactl;
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	/* load PRD table addr */
+	out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma);
+
+	/* specify data direction, triple-check start bit is clear */
+	dmactl = in_be32(mmio + SCC_DMA_CMD);
+	dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+	if (!rw)
+		dmactl |= ATA_DMA_WR;
+	out_be32(mmio + SCC_DMA_CMD, dmactl);
+
+	/* issue r/w command */
+	ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ *	scc_bmdma_start - Start a PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Note: Original code is ata_bmdma_start().
+ */
+
+static void scc_bmdma_start (struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	u8 dmactl;
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	/* start host DMA transaction */
+	dmactl = in_be32(mmio + SCC_DMA_CMD);
+	out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
+}
+
+/**
+ *	scc_devchk - PATA device presence detection
+ *	@ap: ATA channel to examine
+ *	@device: Device to examine (starting at zero)
+ *
+ *	Note: Original code is ata_devchk().
+ */
+
+static unsigned int scc_devchk (struct ata_port *ap,
+				unsigned int device)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	u8 nsect, lbal;
+
+	ap->ops->dev_select(ap, device);
+
+	out_be32(ioaddr->nsect_addr, 0x55);
+	out_be32(ioaddr->lbal_addr, 0xaa);
+
+	out_be32(ioaddr->nsect_addr, 0xaa);
+	out_be32(ioaddr->lbal_addr, 0x55);
+
+	out_be32(ioaddr->nsect_addr, 0x55);
+	out_be32(ioaddr->lbal_addr, 0xaa);
+
+	nsect = in_be32(ioaddr->nsect_addr);
+	lbal = in_be32(ioaddr->lbal_addr);
+
+	if ((nsect == 0x55) && (lbal == 0xaa))
+		return 1;	/* we found a device */
+
+	return 0;		/* nothing found */
+}
+
+/**
+ *	scc_bus_post_reset - PATA device post reset
+ *
+ *	Note: Original code is ata_bus_post_reset().
+ */
+
+static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int dev0 = devmask & (1 << 0);
+	unsigned int dev1 = devmask & (1 << 1);
+	unsigned long timeout;
+
+	/* if device 0 was found in ata_devchk, wait for its
+	 * BSY bit to clear
+	 */
+	if (dev0)
+		ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+	/* if device 1 was found in ata_devchk, wait for
+	 * register access, then wait for BSY to clear
+	 */
+	timeout = jiffies + ATA_TMOUT_BOOT;
+	while (dev1) {
+		u8 nsect, lbal;
+
+		ap->ops->dev_select(ap, 1);
+		nsect = in_be32(ioaddr->nsect_addr);
+		lbal = in_be32(ioaddr->lbal_addr);
+		if ((nsect == 1) && (lbal == 1))
+			break;
+		if (time_after(jiffies, timeout)) {
+			dev1 = 0;
+			break;
+		}
+		msleep(50);	/* give drive a breather */
+	}
+	if (dev1)
+		ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+	/* is all this really necessary? */
+	ap->ops->dev_select(ap, 0);
+	if (dev1)
+		ap->ops->dev_select(ap, 1);
+	if (dev0)
+		ap->ops->dev_select(ap, 0);
+}
+
+/**
+ *	scc_bus_softreset - PATA device software reset
+ *
+ *	Note: Original code is ata_bus_softreset().
+ */
+
+static unsigned int scc_bus_softreset (struct ata_port *ap,
+				       unsigned int devmask)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
+
+	/* software reset.  causes dev0 to be selected */
+	out_be32(ioaddr->ctl_addr, ap->ctl);
+	udelay(20);
+	out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST);
+	udelay(20);
+	out_be32(ioaddr->ctl_addr, ap->ctl);
+
+	/* spec mandates ">= 2ms" before checking status.
+	 * We wait 150ms, because that was the magic delay used for
+	 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+	 * between when the ATA command register is written, and then
+	 * status is checked.  Because waiting for "a while" before
+	 * checking status is fine, post SRST, we perform this magic
+	 * delay here as well.
+	 *
+	 * Old drivers/ide uses the 2mS rule and then waits for ready
+	 */
+	msleep(150);
+
+	/* Before we perform post reset processing we want to see if
+	 * the bus shows 0xFF because the odd clown forgets the D7
+	 * pulldown resistor.
+	 */
+	if (scc_check_status(ap) == 0xFF)
+		return 0;
+
+	scc_bus_post_reset(ap, devmask);
+
+	return 0;
+}
+
+/**
+ *	scc_std_softreset - reset host port via ATA SRST
+ *	@ap: port to reset
+ *	@classes: resulting classes of attached devices
+ *
+ *	Note: Original code is ata_std_softreset().
+ */
+
+static int scc_std_softreset (struct ata_port *ap, unsigned int *classes)
+{
+	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+	unsigned int devmask = 0, err_mask;
+	u8 err;
+
+	DPRINTK("ENTER\n");
+
+	if (ata_port_offline(ap)) {
+		classes[0] = ATA_DEV_NONE;
+		goto out;
+	}
+
+	/* determine if device 0/1 are present */
+	if (scc_devchk(ap, 0))
+		devmask |= (1 << 0);
+	if (slave_possible && scc_devchk(ap, 1))
+		devmask |= (1 << 1);
+
+	/* select device 0 again */
+	ap->ops->dev_select(ap, 0);
+
+	/* issue bus reset */
+	DPRINTK("about to softreset, devmask=%x\n", devmask);
+	err_mask = scc_bus_softreset(ap, devmask);
+	if (err_mask) {
+		ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
+				err_mask);
+		return -EIO;
+	}
+
+	/* determine by signature whether we have ATA or ATAPI devices */
+	classes[0] = ata_dev_try_classify(ap, 0, &err);
+	if (slave_possible && err != 0x81)
+		classes[1] = ata_dev_try_classify(ap, 1, &err);
+
+ out:
+	DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+	return 0;
+}
+
+/**
+ *	scc_bmdma_stop - Stop PCI IDE BMDMA transfer
+ *	@qc: Command we are ending DMA for
+ */
+
+static void scc_bmdma_stop (struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
+	void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR];
+	u32 reg;
+
+	while (1) {
+		reg = in_be32(bmid_base + SCC_DMA_INTST);
+
+		if (reg & INTSTS_SERROR) {
+			printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
+			out_be32(bmid_base + SCC_DMA_CMD,
+				 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+			continue;
+		}
+
+		if (reg & INTSTS_PRERR) {
+			u32 maea0, maec0;
+			maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0);
+			maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0);
+			printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
+			out_be32(bmid_base + SCC_DMA_CMD,
+				 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+			continue;
+		}
+
+		if (reg & INTSTS_RERR) {
+			printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
+			out_be32(bmid_base + SCC_DMA_CMD,
+				 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+			continue;
+		}
+
+		if (reg & INTSTS_ICERR) {
+			out_be32(bmid_base + SCC_DMA_CMD,
+				 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+			printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
+			continue;
+		}
+
+		if (reg & INTSTS_BMSINT) {
+			unsigned int classes;
+			printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
+			/* TBD: SW reset */
+			scc_std_softreset(ap, &classes);
+			continue;
+		}
+
+		if (reg & INTSTS_BMHE) {
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE);
+			continue;
+		}
+
+		if (reg & INTSTS_ACTEINT) {
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT);
+			continue;
+		}
+
+		if (reg & INTSTS_IOIRQS) {
+			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS);
+			continue;
+		}
+		break;
+	}
+
+	/* clear start/stop bit */
+	out_be32(bmid_base + SCC_DMA_CMD,
+		 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+
+	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+	ata_altstatus(ap);	/* dummy read */
+}
+
+/**
+ *	scc_bmdma_status - Read PCI IDE BMDMA status
+ *	@ap: Port associated with this ATA transaction.
+ */
+
+static u8 scc_bmdma_status (struct ata_port *ap)
+{
+	u8 host_stat;
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	host_stat = in_be32(mmio + SCC_DMA_STATUS);
+
+	/* Workaround for PTERADD: emulate DMA_INTR when
+	 * - IDE_STATUS[ERR] = 1
+	 * - INT_STATUS[INTRQ] = 1
+	 * - DMA_STATUS[IORACTA] = 1
+	 */
+	if (!(host_stat & ATA_DMA_INTR)) {
+		u32 int_status = in_be32(mmio + SCC_DMA_INTST);
+		if (ata_altstatus(ap) & ATA_ERR &&
+		    int_status & INTSTS_INTRQ &&
+		    host_stat & ATA_DMA_ACTIVE)
+			host_stat |= ATA_DMA_INTR;
+	}
+
+	return host_stat;
+}
+
+/**
+ *	scc_data_xfer - Transfer data by PIO
+ *	@adev: device for this I/O
+ *	@buf: data buffer
+ *	@buflen: buffer length
+ *	@write_data: read/write
+ *
+ *	Note: Original code is ata_data_xfer().
+ */
+
+static void scc_data_xfer (struct ata_device *adev, unsigned char *buf,
+			   unsigned int buflen, int write_data)
+{
+	struct ata_port *ap = adev->ap;
+	unsigned int words = buflen >> 1;
+	unsigned int i;
+	u16 *buf16 = (u16 *) buf;
+	void __iomem *mmio = ap->ioaddr.data_addr;
+
+	/* Transfer multiple of 2 bytes */
+	if (write_data) {
+		for (i = 0; i < words; i++)
+			out_be32(mmio, cpu_to_le16(buf16[i]));
+	} else {
+		for (i = 0; i < words; i++)
+			buf16[i] = le16_to_cpu(in_be32(mmio));
+	}
+
+	/* Transfer trailing 1 byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		u16 align_buf[1] = { 0 };
+		unsigned char *trailing_buf = buf + buflen - 1;
+
+		if (write_data) {
+			memcpy(align_buf, trailing_buf, 1);
+			out_be32(mmio, cpu_to_le16(align_buf[0]));
+		} else {
+			align_buf[0] = le16_to_cpu(in_be32(mmio));
+			memcpy(trailing_buf, align_buf, 1);
+		}
+	}
+}
+
+/**
+ *	scc_irq_on - Enable interrupts on a port.
+ *	@ap: Port on which interrupts are enabled.
+ *
+ *	Note: Original code is ata_irq_on().
+ */
+
+static u8 scc_irq_on (struct ata_port *ap)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	u8 tmp;
+
+	ap->ctl &= ~ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	out_be32(ioaddr->ctl_addr, ap->ctl);
+	tmp = ata_wait_idle(ap);
+
+	ap->ops->irq_clear(ap);
+
+	return tmp;
+}
+
+/**
+ *	scc_irq_ack - Acknowledge a device interrupt.
+ *	@ap: Port on which interrupts are enabled.
+ *
+ *	Note: Original code is ata_irq_ack().
+ */
+
+static u8 scc_irq_ack (struct ata_port *ap, unsigned int chk_drq)
+{
+	unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
+	u8 host_stat, post_stat, status;
+
+	status = ata_busy_wait(ap, bits, 1000);
+	if (status & bits)
+		if (ata_msg_err(ap))
+			printk(KERN_ERR "abnormal status 0x%X\n", status);
+
+	/* get controller status; clear intr, err bits */
+	host_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
+	out_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS,
+		 host_stat | ATA_DMA_INTR | ATA_DMA_ERR);
+
+	post_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
+
+	if (ata_msg_intr(ap))
+		printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
+		       __FUNCTION__,
+		       host_stat, post_stat, status);
+
+	return status;
+}
+
+/**
+ *	scc_bmdma_freeze - Freeze BMDMA controller port
+ *	@ap: port to freeze
+ *
+ *	Note: Original code is ata_bmdma_freeze().
+ */
+
+static void scc_bmdma_freeze (struct ata_port *ap)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	ap->ctl |= ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	out_be32(ioaddr->ctl_addr, ap->ctl);
+
+	/* Under certain circumstances, some controllers raise IRQ on
+	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
+	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
+	 */
+	ata_chk_status(ap);
+
+	ap->ops->irq_clear(ap);
+}
+
+/**
+ *	scc_pata_prereset - prepare for reset
+ *	@ap: ATA port to be reset
+ */
+
+static int scc_pata_prereset (struct ata_port *ap)
+{
+	ap->cbl = ATA_CBL_PATA80;
+	return ata_std_prereset(ap);
+}
+
+/**
+ *	scc_std_postreset - standard postreset callback
+ *	@ap: the target ata_port
+ *	@classes: classes of attached devices
+ *
+ *	Note: Original code is ata_std_postreset().
+ */
+
+static void scc_std_postreset (struct ata_port *ap, unsigned int *classes)
+{
+	DPRINTK("ENTER\n");
+
+	/* re-enable interrupts */
+	if (!ap->ops->error_handler)
+		ap->ops->irq_on(ap);
+
+	/* is double-select really necessary? */
+	if (classes[0] != ATA_DEV_NONE)
+		ap->ops->dev_select(ap, 1);
+	if (classes[1] != ATA_DEV_NONE)
+		ap->ops->dev_select(ap, 0);
+
+	/* bail out if no device is present */
+	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+		DPRINTK("EXIT, no device\n");
+		return;
+	}
+
+	/* set up device control */
+	if (ap->ioaddr.ctl_addr)
+		out_be32(ap->ioaddr.ctl_addr, ap->ctl);
+
+	DPRINTK("EXIT\n");
+}
+
+/**
+ *	scc_error_handler - Stock error handler for BMDMA controller
+ *	@ap: port to handle error for
+ */
+
+static void scc_error_handler (struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL,
+			   scc_std_postreset);
+}
+
+/**
+ *	scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Note: Original code is ata_bmdma_irq_clear().
+ */
+
+static void scc_bmdma_irq_clear (struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	if (!mmio)
+		return;
+
+	out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS));
+}
+
+/**
+ *	scc_port_start - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Allocate space for PRD table using ata_port_start().
+ *	Set PRD table address for PTERADD. (PRD Transfer End Read)
+ */
+
+static int scc_port_start (struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+	int rc;
+
+	rc = ata_port_start(ap);
+	if (rc)
+		return rc;
+
+	out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma);
+	return 0;
+}
+
+/**
+ *	scc_port_stop - Undo scc_port_start()
+ *	@ap: Port to shut down
+ *
+ *	Reset PTERADD.
+ */
+
+static void scc_port_stop (struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	out_be32(mmio + SCC_DMA_PTERADD, 0);
+}
+
+static struct scsi_host_template scc_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+};
+
+static const struct ata_port_operations scc_pata_ops = {
+	.port_disable		= ata_port_disable,
+	.set_piomode		= scc_set_piomode,
+	.set_dmamode		= scc_set_dmamode,
+	.mode_filter		= ata_pci_default_filter,
+
+	.tf_load		= scc_tf_load,
+	.tf_read		= scc_tf_read,
+	.exec_command		= scc_exec_command,
+	.check_status		= scc_check_status,
+	.check_altstatus	= scc_check_altstatus,
+	.dev_select		= scc_std_dev_select,
+
+	.bmdma_setup		= scc_bmdma_setup,
+	.bmdma_start		= scc_bmdma_start,
+	.bmdma_stop		= scc_bmdma_stop,
+	.bmdma_status		= scc_bmdma_status,
+	.data_xfer		= scc_data_xfer,
+
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+
+	.freeze			= scc_bmdma_freeze,
+	.error_handler		= scc_error_handler,
+	.post_internal_cmd	= scc_bmdma_stop,
+
+	.irq_handler		= ata_interrupt,
+	.irq_clear		= scc_bmdma_irq_clear,
+	.irq_on			= scc_irq_on,
+	.irq_ack		= scc_irq_ack,
+
+	.port_start		= scc_port_start,
+	.port_stop		= scc_port_stop,
+};
+
+static struct ata_port_info scc_port_info[] = {
+	{
+		.sht		= &scc_sht,
+		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
+		.pio_mask	= 0x1f,	/* pio0-4 */
+		.mwdma_mask	= 0x00,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &scc_pata_ops,
+	},
+};
+
+/**
+ *	scc_reset_controller - initialize SCC PATA controller.
+ */
+
+static int scc_reset_controller(struct ata_probe_ent *probe_ent)
+{
+	void __iomem *ctrl_base = probe_ent->iomap[SCC_CTRL_BAR];
+	void __iomem *bmid_base = probe_ent->iomap[SCC_BMID_BAR];
+	void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
+	void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
+	void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
+	void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK;
+	void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS;
+	u32 reg = 0;
+
+	out_be32(cckctrl_port, reg);
+	reg |= CCKCTRL_ATACLKOEN;
+	out_be32(cckctrl_port, reg);
+	reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+	out_be32(cckctrl_port, reg);
+	reg |= CCKCTRL_CRST;
+	out_be32(cckctrl_port, reg);
+
+	for (;;) {
+		reg = in_be32(cckctrl_port);
+		if (reg & CCKCTRL_CRST)
+			break;
+		udelay(5000);
+	}
+
+	reg |= CCKCTRL_ATARESET;
+	out_be32(cckctrl_port, reg);
+	out_be32(ecmode_port, ECMODE_VALUE);
+	out_be32(mode_port, MODE_JCUSFEN);
+	out_be32(intmask_port, INTMASK_MSK);
+
+	if (in_be32(dmastatus_port) & QCHSD_STPDIAG) {
+		printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ *	scc_setup_ports - initialize ioaddr with SCC PATA port offsets.
+ *	@ioaddr: IO address structure to be initialized
+ *	@base: base address of BMID region
+ */
+
+static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
+{
+	ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR;
+	ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
+	ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
+	ioaddr->bmdma_addr = base;
+	ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
+	ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
+	ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
+	ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
+	ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
+	ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
+	ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
+	ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
+	ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
+	ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
+}
+
+static int scc_host_init(struct ata_probe_ent *probe_ent)
+{
+	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+	int rc;
+
+	rc = scc_reset_controller(probe_ent);
+	if (rc)
+		return rc;
+
+	probe_ent->n_ports = 1;
+
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	scc_setup_ports(&probe_ent->port[0], probe_ent->iomap[SCC_BMID_BAR]);
+
+	pci_set_master(pdev);
+
+	return 0;
+}
+
+/**
+ *	scc_init_one - Register SCC PATA device with kernel services
+ *	@pdev: PCI device to register
+ *	@ent: Entry in scc_pci_tbl matching with @pdev
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, or -ERRNO value.
+ */
+
+static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static int printed_version;
+	unsigned int board_idx = (unsigned int) ent->driver_data;
+	struct device *dev = &pdev->dev;
+	struct ata_probe_ent *probe_ent;
+	int rc;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "version " DRV_VERSION "\n");
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
+	if (rc == -EBUSY)
+		pcim_pin_device(pdev);
+	if (rc)
+		return rc;
+
+	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
+	if (!probe_ent)
+		return -ENOMEM;
+
+	probe_ent->dev = dev;
+	INIT_LIST_HEAD(&probe_ent->node);
+
+	probe_ent->sht 		= scc_port_info[board_idx].sht;
+	probe_ent->port_flags 	= scc_port_info[board_idx].flags;
+	probe_ent->pio_mask 	= scc_port_info[board_idx].pio_mask;
+	probe_ent->udma_mask 	= scc_port_info[board_idx].udma_mask;
+	probe_ent->port_ops 	= scc_port_info[board_idx].port_ops;
+
+	probe_ent->irq = pdev->irq;
+	probe_ent->irq_flags = IRQF_SHARED;
+	probe_ent->iomap = pcim_iomap_table(pdev);
+
+	rc = scc_host_init(probe_ent);
+	if (rc)
+		return rc;
+
+	if (!ata_device_add(probe_ent))
+		return -ENODEV;
+
+	devm_kfree(dev, probe_ent);
+	return 0;
+}
+
+static struct pci_driver scc_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= scc_pci_tbl,
+	.probe			= scc_init_one,
+	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
+};
+
+static int __init scc_init (void)
+{
+	int rc;
+
+	DPRINTK("pci_register_driver\n");
+	rc = pci_register_driver(&scc_pci_driver);
+	if (rc)
+		return rc;
+
+	DPRINTK("done\n");
+	return 0;
+}
+
+static void __exit scc_exit (void)
+{
+	pci_unregister_driver(&scc_pci_driver);
+}
+
+module_init(scc_init);
+module_exit(scc_exit);
+
+MODULE_AUTHOR("Toshiba corp");
+MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index ad5b43fef3d..dde7eb9f72b 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.3.9"
+#define DRV_VERSION "0.4.0"
 
 #define SVWKS_CSB5_REVISION_NEW	0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION	0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index ed79fabe025..1cb67b221c2 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.5"
 
 /**
  *	sil680_selreg		-	return register base
@@ -139,10 +139,13 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
 	unsigned long tfaddr = sil680_selreg(ap, 0x02);
 	unsigned long addr = sil680_seldev(ap, adev, 0x04);
+	unsigned long addr_mask = 0x80 + 4 * ap->port_no;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int pio = adev->pio_mode - XFER_PIO_0;
 	int lowest_pio = pio;
+	int port_shift = 4 * adev->devno;
 	u16 reg;
+	u8 mode;
 
 	struct ata_device *pair = ata_dev_pair(adev);
 
@@ -153,10 +156,17 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
 
 	pci_read_config_word(pdev, tfaddr-2, &reg);
+	pci_read_config_byte(pdev, addr_mask, &mode);
+
 	reg &= ~0x0200;			/* Clear IORDY */
-	if (ata_pio_need_iordy(adev))
+	mode &= ~(3 << port_shift);	/* Clear IORDY and DMA bits */
+
+	if (ata_pio_need_iordy(adev)) {
 		reg |= 0x0200;		/* Enable IORDY */
+		mode |= 1 << port_shift;
+	}
 	pci_write_config_word(pdev, tfaddr-2, reg);
+	pci_write_config_byte(pdev, addr_mask, mode);
 }
 
 /**
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 560103d55b2..be300923b27 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -32,11 +32,10 @@
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
 #include <linux/ata.h>
-#include "libata.h"
+#include "sis.h"
 
-#undef DRV_NAME		/* already defined in libata.h, for libata-core */
 #define DRV_NAME	"pata_sis"
-#define DRV_VERSION	"0.4.5"
+#define DRV_VERSION	"0.5.0"
 
 struct sis_chipset {
 	u16 device;			/* PCI host ID */
@@ -151,7 +150,7 @@ static int sis_66_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
 		ata_port_disable(ap);
-		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+		ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
 		return 0;
 	}
 	/* Older chips keep cable detect in bits 4/5 of reg 0x48 */
@@ -197,7 +196,7 @@ static int sis_old_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
 		ata_port_disable(ap);
-		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+		ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
 		return 0;
 	}
 	ap->cbl = ATA_CBL_PATA40;
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 96e890fd645..13e81f0ef1f 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -7,6 +7,13 @@
  * 		SL82C105/Winbond 553 IDE driver
  *
  * and in part on the documentation and errata sheet
+ *
+ *
+ * Note: The controller like many controllers has shared timings for
+ * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
+ * in the dma_stop function. Thus we actually don't need a set_dmamode
+ * method as the PIO method is always called and will set the right PIO
+ * timing parameters.
  */
 
 #include <linux/kernel.h>
@@ -19,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.3.0"
 
 enum {
 	/*
@@ -126,33 +133,6 @@ static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *a
 }
 
 /**
- *	sl82c105_set_dmamode	-	set initial DMA mode data
- *	@ap: ATA interface
- *	@adev: ATA device
- *
- *	Called to do the DMA mode setup. This replaces the PIO timings
- *	for the device in question. Set appropriate PIO timings not DMA
- *	timings at this point.
- */
-
-static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
-	switch(adev->dma_mode) {
-		case XFER_MW_DMA_0:
-			sl82c105_configure_piomode(ap, adev, 0);
-			break;
-		case XFER_MW_DMA_1:
-			sl82c105_configure_piomode(ap, adev, 3);
-			break;
-		case XFER_MW_DMA_2:
-			sl82c105_configure_piomode(ap, adev, 4);
-			break;
-		default:
-			BUG();
-	}
-}
-
-/**
  *	sl82c105_reset_engine	-	Reset the DMA engine
  *	@ap: ATA interface
  *
@@ -222,7 +202,7 @@ static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc)
 
 	/* This will redo the initial setup of the DMA device to matching
 	   PIO timings */
-	sl82c105_set_dmamode(ap, qc->dev);
+	sl82c105_set_piomode(ap, qc->dev);
 }
 
 static struct scsi_host_template sl82c105_sht = {
@@ -246,7 +226,6 @@ static struct scsi_host_template sl82c105_sht = {
 static struct ata_port_operations sl82c105_port_ops = {
 	.port_disable	= ata_port_disable,
 	.set_piomode	= sl82c105_set_piomode,
-	.set_dmamode	= sl82c105_set_dmamode,
 	.mode_filter	= ata_pci_default_filter,
 
 	.tf_load	= ata_tf_load,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 220fcd6c549..20fc2d0dcfa 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -170,7 +170,7 @@ static int via_pre_reset(struct ata_port *ap)
 		ap->cbl = ATA_CBL_PATA40;
 	else
 		ap->cbl = ATA_CBL_PATA_UNK;
-		
+
 
 	return ata_std_prereset(ap);
 }
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 0888b4f19f4..6c111035fc8 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.1"
+#define DRV_VERSION "0.0.2"
 
 #define NR_HOST 4	/* Two winbond controllers, two channels each */
 
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 857ac23217a..5dd3ca8b5f2 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pdc_adma"
-#define DRV_VERSION	"0.04"
+#define DRV_VERSION	"0.05"
 
 /* macro to calculate base address for ATA regs */
 #define ADMA_ATA_REGS(base,port_no)	((base) + ((port_no) * 0x40))
@@ -498,7 +498,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host)
 				if ((status & ATA_BUSY))
 					continue;
 				DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
-					ap->id, qc->tf.protocol, status);
+					ap->print_id, qc->tf.protocol, status);
 
 				/* complete taskfile transaction */
 				pp->state = adma_state_idle;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index d689df52eae..a65ba636aaa 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.7"
+#define DRV_VERSION	"0.8"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -137,14 +137,19 @@ enum {
 	PCI_ERR			= (1 << 18),
 	TRAN_LO_DONE		= (1 << 19),	/* 6xxx: IRQ coalescing */
 	TRAN_HI_DONE		= (1 << 20),	/* 6xxx: IRQ coalescing */
+	PORTS_0_3_COAL_DONE	= (1 << 8),
+	PORTS_4_7_COAL_DONE	= (1 << 17),
 	PORTS_0_7_COAL_DONE	= (1 << 21),	/* 6xxx: IRQ coalescing */
 	GPIO_INT		= (1 << 22),
 	SELF_INT		= (1 << 23),
 	TWSI_INT		= (1 << 24),
 	HC_MAIN_RSVD		= (0x7f << 25),	/* bits 31-25 */
+	HC_MAIN_RSVD_5		= (0x1fff << 19), /* bits 31-19 */
 	HC_MAIN_MASKED_IRQS	= (TRAN_LO_DONE | TRAN_HI_DONE |
 				   PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
 				   HC_MAIN_RSVD),
+	HC_MAIN_MASKED_IRQS_5	= (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
+				   HC_MAIN_RSVD_5),
 
 	/* SATAHC registers */
 	HC_CFG_OFS		= 0,
@@ -814,23 +819,27 @@ static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
 	u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
 
 	/* set up non-NCQ EDMA configuration */
-	cfg &= ~0x1f;		/* clear queue depth */
-	cfg &= ~EDMA_CFG_NCQ;	/* clear NCQ mode */
 	cfg &= ~(1 << 9);	/* disable equeue */
 
-	if (IS_GEN_I(hpriv))
+	if (IS_GEN_I(hpriv)) {
+		cfg &= ~0x1f;		/* clear queue depth */
 		cfg |= (1 << 8);	/* enab config burst size mask */
+	}
 
-	else if (IS_GEN_II(hpriv))
+	else if (IS_GEN_II(hpriv)) {
+		cfg &= ~0x1f;		/* clear queue depth */
 		cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+		cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
+	}
 
 	else if (IS_GEN_IIE(hpriv)) {
-		cfg |= (1 << 23);	/* dis RX PM port mask */
-		cfg &= ~(1 << 16);	/* dis FIS-based switching (for now) */
+		cfg |= (1 << 23);	/* do not mask PM field in rx'd FIS */
+		cfg |= (1 << 22);	/* enab 4-entry host queue cache */
 		cfg &= ~(1 << 19);	/* dis 128-entry queue (for now?) */
 		cfg |= (1 << 18);	/* enab early completion */
-		cfg |= (1 << 17);	/* enab host q cache */
-		cfg |= (1 << 22);	/* enab cutthrough */
+		cfg |= (1 << 17);	/* enab cut-through (dis stor&forwrd) */
+		cfg &= ~(1 << 16);	/* dis FIS-based switching (for now) */
+		cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
 	}
 
 	writelfl(cfg, port_mmio + EDMA_CFG_OFS);
@@ -1276,7 +1285,7 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed)
 		pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
 	}
 	DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
-		"SERR: 0x%08x\n", ap->id, edma_err_cause, serr);
+		"SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr);
 
 	/* Clear EDMA now that SERR cleanup done */
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -2052,7 +2061,7 @@ static void mv_port_init(struct ata_ioports *port,  void __iomem *port_mmio)
 	port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
 
 	/* unused: */
-	port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+	port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
 
 	/* Clear any currently outstanding port interrupt conditions */
 	serr_ofs = mv_scr_offset(SCR_ERROR);
@@ -2240,7 +2249,11 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 
 	/* and unmask interrupt generation for host regs */
 	writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
-	writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
+
+	if (IS_50XX(hpriv))
+		writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
+	else
+		writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
 
 	VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
 		"PCI int cause/mask=0x%08x/0x%08x\n",
@@ -2347,7 +2360,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 
 	/* Enable interrupts */
-	if (msi && !pci_enable_msi(pdev))
+	if (msi && pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
 
 	mv_dump_pci_cfg(pdev, 0x68);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ab92f208dae..30eed12b363 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -219,6 +219,7 @@ struct nv_adma_port_priv {
 	void __iomem *		gen_block;
 	void __iomem *		notifier_clear_block;
 	u8			flags;
+	int			last_issue_ncq;
 };
 
 struct nv_host_priv {
@@ -254,10 +255,7 @@ static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg);
 static int nv_adma_port_resume(struct ata_port *ap);
 static void nv_adma_error_handler(struct ata_port *ap);
 static void nv_adma_host_stop(struct ata_host *host);
-static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc);
-static void nv_adma_bmdma_start(struct ata_queued_cmd *qc);
-static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 nv_adma_bmdma_status(struct ata_port *ap);
+static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
 
 enum nv_host_type
 {
@@ -432,16 +430,16 @@ static const struct ata_port_operations nv_adma_ops = {
 	.exec_command		= ata_exec_command,
 	.check_status		= ata_check_status,
 	.dev_select		= ata_std_dev_select,
-	.bmdma_setup		= nv_adma_bmdma_setup,
-	.bmdma_start		= nv_adma_bmdma_start,
-	.bmdma_stop		= nv_adma_bmdma_stop,
-	.bmdma_status		= nv_adma_bmdma_status,
+	.bmdma_setup		= ata_bmdma_setup,
+	.bmdma_start		= ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= nv_adma_qc_prep,
 	.qc_issue		= nv_adma_qc_issue,
 	.freeze			= nv_ck804_freeze,
 	.thaw			= nv_ck804_thaw,
 	.error_handler		= nv_adma_error_handler,
-	.post_internal_cmd	= nv_adma_bmdma_stop,
+	.post_internal_cmd	= nv_adma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= nv_adma_interrupt,
 	.irq_clear		= nv_adma_irq_clear,
@@ -661,30 +659,31 @@ static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
 {
 	unsigned int idx = 0;
 
-	cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB);
-
-	if ((tf->flags & ATA_TFLAG_LBA48) == 0) {
-		cpb[idx++] = cpu_to_le16(IGN);
-		cpb[idx++] = cpu_to_le16(IGN);
-		cpb[idx++] = cpu_to_le16(IGN);
-		cpb[idx++] = cpu_to_le16(IGN);
-		cpb[idx++] = cpu_to_le16(IGN);
-	}
-	else {
-		cpb[idx++] = cpu_to_le16((ATA_REG_ERR   << 8) | tf->hob_feature);
-		cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
-		cpb[idx++] = cpu_to_le16((ATA_REG_LBAL  << 8) | tf->hob_lbal);
-		cpb[idx++] = cpu_to_le16((ATA_REG_LBAM  << 8) | tf->hob_lbam);
-		cpb[idx++] = cpu_to_le16((ATA_REG_LBAH  << 8) | tf->hob_lbah);
+	if(tf->flags & ATA_TFLAG_ISADDR) {
+		if (tf->flags & ATA_TFLAG_LBA48) {
+			cpb[idx++] = cpu_to_le16((ATA_REG_ERR   << 8) | tf->hob_feature | WNB);
+			cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
+			cpb[idx++] = cpu_to_le16((ATA_REG_LBAL  << 8) | tf->hob_lbal);
+			cpb[idx++] = cpu_to_le16((ATA_REG_LBAM  << 8) | tf->hob_lbam);
+			cpb[idx++] = cpu_to_le16((ATA_REG_LBAH  << 8) | tf->hob_lbah);
+			cpb[idx++] = cpu_to_le16((ATA_REG_ERR    << 8) | tf->feature);
+		} else
+			cpb[idx++] = cpu_to_le16((ATA_REG_ERR    << 8) | tf->feature | WNB);
+
+		cpb[idx++] = cpu_to_le16((ATA_REG_NSECT  << 8) | tf->nsect);
+		cpb[idx++] = cpu_to_le16((ATA_REG_LBAL   << 8) | tf->lbal);
+		cpb[idx++] = cpu_to_le16((ATA_REG_LBAM   << 8) | tf->lbam);
+		cpb[idx++] = cpu_to_le16((ATA_REG_LBAH   << 8) | tf->lbah);
 	}
-	cpb[idx++] = cpu_to_le16((ATA_REG_ERR    << 8) | tf->feature);
-	cpb[idx++] = cpu_to_le16((ATA_REG_NSECT  << 8) | tf->nsect);
-	cpb[idx++] = cpu_to_le16((ATA_REG_LBAL   << 8) | tf->lbal);
-	cpb[idx++] = cpu_to_le16((ATA_REG_LBAM   << 8) | tf->lbam);
-	cpb[idx++] = cpu_to_le16((ATA_REG_LBAH   << 8) | tf->lbah);
+
+	if(tf->flags & ATA_TFLAG_DEVICE)
+		cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device);
 
 	cpb[idx++] = cpu_to_le16((ATA_REG_CMD    << 8) | tf->command | CMDEND);
 
+	while(idx < 12)
+		cpb[idx++] = cpu_to_le16(IGN);
+
 	return idx;
 }
 
@@ -741,6 +740,17 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
 			DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
 				qc->err_mask);
 			ata_qc_complete(qc);
+		} else {
+			struct ata_eh_info *ehi = &ap->eh_info;
+			/* Notifier bits set without a command may indicate the drive
+			   is misbehaving. Raise host state machine violation on this
+			   condition. */
+			ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n",
+				cpb_num);
+			ehi->err_mask |= AC_ERR_HSM;
+			ehi->action |= ATA_EH_SOFTRESET;
+			ata_port_freeze(ap);
+			return 1;
 		}
 	}
 	return 0;
@@ -852,22 +862,14 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
 
 			if (status & (NV_ADMA_STAT_DONE |
 				      NV_ADMA_STAT_CPBERR)) {
+				u32 check_commands = notifier | notifier_error;
+				int pos, error = 0;
 				/** Check CPBs for completed commands */
-
-				if (ata_tag_valid(ap->active_tag)) {
-					/* Non-NCQ command */
-					nv_adma_check_cpb(ap, ap->active_tag,
-						notifier_error & (1 << ap->active_tag));
-				} else {
-					int pos, error = 0;
-					u32 active = ap->sactive;
-
-					while ((pos = ffs(active)) && !error) {
-						pos--;
-						error = nv_adma_check_cpb(ap, pos,
-							notifier_error & (1 << pos) );
-						active &= ~(1 << pos );
-					}
+				while ((pos = ffs(check_commands)) && !error) {
+					pos--;
+					error = nv_adma_check_cpb(ap, pos,
+						notifier_error & (1 << pos) );
+					check_commands &= ~(1 << pos );
 				}
 			}
 		}
@@ -905,73 +907,12 @@ static void nv_adma_irq_clear(struct ata_port *ap)
 	iowrite8(ioread8(dma_stat_addr), dma_stat_addr);
 }
 
-static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
-	struct nv_adma_port_priv *pp = ap->private_data;
-	u8 dmactl;
-
-	if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
-		WARN_ON(1);
-		return;
-	}
-
-	/* load PRD table addr. */
-	iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
-	/* specify data direction, triple-check start bit is clear */
-	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-	dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
-	if (!rw)
-		dmactl |= ATA_DMA_WR;
-
-	iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
-	/* issue r/w command */
-	ata_exec_command(ap, &qc->tf);
-}
-
-static void nv_adma_bmdma_start(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct nv_adma_port_priv *pp = ap->private_data;
-	u8 dmactl;
-
-	if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
-		WARN_ON(1);
-		return;
-	}
-
-	/* start host DMA transaction */
-	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-	iowrite8(dmactl | ATA_DMA_START,
-		 ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-}
-
-static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct nv_adma_port_priv *pp = ap->private_data;
-
-	if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
-		return;
-
-	/* clear start/stop bit */
-	iowrite8(ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
-		 ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
-	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_altstatus(ap);        /* dummy read */
-}
-
-static u8 nv_adma_bmdma_status(struct ata_port *ap)
+static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
 {
-	struct nv_adma_port_priv *pp = ap->private_data;
-
-	WARN_ON(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE));
+	struct nv_adma_port_priv *pp = qc->ap->private_data;
 
-	return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+		ata_bmdma_post_internal_cmd(qc);
 }
 
 static int nv_adma_port_start(struct ata_port *ap)
@@ -1040,14 +981,15 @@ static int nv_adma_port_start(struct ata_port *ap)
 
 	/* clear GO for register mode, enable interrupt */
 	tmp = readw(mmio + NV_ADMA_CTL);
-	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+		 NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
 
 	tmp = readw(mmio + NV_ADMA_CTL);
 	writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 	udelay(1);
 	writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 
 	return 0;
 }
@@ -1099,14 +1041,15 @@ static int nv_adma_port_resume(struct ata_port *ap)
 
 	/* clear GO for register mode, enable interrupt */
 	tmp = readw(mmio + NV_ADMA_CTL);
-	writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+		 NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
 
 	tmp = readw(mmio + NV_ADMA_CTL);
 	writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 	udelay(1);
 	writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 
 	return 0;
 }
@@ -1163,11 +1106,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
 			      int idx,
 			      struct nv_adma_prd *aprd)
 {
-	u8 flags;
-
-	memset(aprd, 0, sizeof(struct nv_adma_prd));
-
-	flags = 0;
+	u8 flags = 0;
 	if (qc->tf.flags & ATA_TFLAG_WRITE)
 		flags |= NV_APRD_WRITE;
 	if (idx == qc->n_elem - 1)
@@ -1178,6 +1117,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
 	aprd->addr  = cpu_to_le64(((u64)sg_dma_address(sg)));
 	aprd->len   = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
 	aprd->flags = flags;
+	aprd->packet_len = 0;
 }
 
 static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
@@ -1198,6 +1138,8 @@ static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
 	}
 	if (idx > 5)
 		cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
+	else
+		cpb->next_aprd = cpu_to_le64(0);
 }
 
 static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
@@ -1230,7 +1172,10 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
 		return;
 	}
 
-	memset(cpb, 0, sizeof(struct nv_adma_cpb));
+	cpb->resp_flags = NV_CPB_RESP_DONE;
+	wmb();
+	cpb->ctl_flags = 0;
+	wmb();
 
 	cpb->len		= 3;
 	cpb->tag		= qc->tag;
@@ -1254,12 +1199,15 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
 	   finished filling in all of the contents */
 	wmb();
 	cpb->ctl_flags = ctl_flags;
+	wmb();
+	cpb->resp_flags = 0;
 }
 
 static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct nv_adma_port_priv *pp = qc->ap->private_data;
 	void __iomem *mmio = pp->ctl_block;
+	int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ);
 
 	VPRINTK("ENTER\n");
 
@@ -1274,6 +1222,14 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
 	/* write append register, command tag in lower 8 bits
 	   and (number of cpbs to append -1) in top 8 bits */
 	wmb();
+
+	if(curr_ncq != pp->last_issue_ncq) {
+	   	/* Seems to need some delay before switching between NCQ and non-NCQ
+		   commands, else we get command timeouts and such. */
+		udelay(20);
+		pp->last_issue_ncq = curr_ncq;
+	}
+
 	writew(qc->tag, mmio + NV_ADMA_APPEND);
 
 	DPRINTK("Issued tag %u\n",qc->tag);
@@ -1447,6 +1403,30 @@ static void nv_adma_error_handler(struct ata_port *ap)
 		int i;
 		u16 tmp;
 
+		if(ata_tag_valid(ap->active_tag) || ap->sactive) {
+			u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+			u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+			u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
+			u32 status = readw(mmio + NV_ADMA_STAT);
+			u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
+			u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
+
+			ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+				"notifier_error 0x%X gen_ctl 0x%X status 0x%X "
+				"next cpb count 0x%X next cpb idx 0x%x\n",
+				notifier, notifier_error, gen_ctl, status,
+				cpb_count, next_cpb_idx);
+
+			for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+				struct nv_adma_cpb *cpb = &pp->cpb[i];
+				if( (ata_tag_valid(ap->active_tag) && i == ap->active_tag) ||
+				    ap->sactive & (1 << i) )
+					ata_port_printk(ap, KERN_ERR,
+						"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
+						i, cpb->ctl_flags, cpb->resp_flags);
+			}
+		}
+
 		/* Push us back into port register mode for error handling. */
 		nv_adma_register_mode(ap);
 
@@ -1460,10 +1440,10 @@ static void nv_adma_error_handler(struct ata_port *ap)
 		/* Reset channel */
 		tmp = readw(mmio + NV_ADMA_CTL);
 		writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-		readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+		readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 		udelay(1);
 		writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-		readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+		readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 	}
 
 	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index cf9ed8c3930..2339813ce9f 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"1.05"
+#define DRV_VERSION	"2.00"
 
 
 enum {
@@ -218,6 +218,7 @@ static const struct ata_port_operations pdc_pata_ops = {
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
 	.error_handler		= pdc_error_handler,
+	.post_internal_cmd	= pdc_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
@@ -776,7 +777,8 @@ static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
 	return pdc_check_atapi_dma(qc);
 }
 
-static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
+static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base,
+			       void __iomem *scr_addr)
 {
 	port->cmd_addr		= base;
 	port->data_addr		= base;
@@ -791,6 +793,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
 	port->status_addr	= base + 0x1c;
 	port->altstatus_addr	=
 	port->ctl_addr		= base + 0x38;
+	port->scr_addr		= scr_addr;
 }
 
 
@@ -903,11 +906,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 
 	base = probe_ent->iomap[PDC_MMIO_BAR];
 
-	pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
-	pdc_ata_setup_port(&probe_ent->port[1], base + 0x280);
-
-	probe_ent->port[0].scr_addr = base + 0x400;
-	probe_ent->port[1].scr_addr = base + 0x500;
+	pdc_ata_setup_port(&probe_ent->port[0], base + 0x200, base + 0x400);
+	pdc_ata_setup_port(&probe_ent->port[1], base + 0x280, base + 0x500);
 
 	/* notice 4-port boards */
 	switch (board_idx) {
@@ -916,12 +916,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		/* Fall through */
 	case board_20319:
        		probe_ent->n_ports = 4;
-
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
-		probe_ent->port[2].scr_addr = base + 0x600;
-		probe_ent->port[3].scr_addr = base + 0x700;
+		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, base + 0x600);
+		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, base + 0x700);
 		break;
 	case board_2057x:
 		hp->flags |= PDC_FLAG_GEN_II;
@@ -931,7 +927,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		tmp = readb(base + PDC_FLASH_CTL+1);
 		if (!(tmp & 0x80)) {
 			probe_ent->n_ports = 3;
-			pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
+			pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
 			hp->port_flags[2] = ATA_FLAG_SLAVE_POSS;
 			printk(KERN_INFO DRV_NAME " PATA port found\n");
 		} else
@@ -941,12 +937,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		break;
 	case board_20619:
 		probe_ent->n_ports = 4;
-
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
-		probe_ent->port[2].scr_addr = base + 0x600;
-		probe_ent->port[3].scr_addr = base + 0x700;
+		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
+		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, NULL);
 		break;
 	default:
 		BUG();
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 6097d8f2a0c..8786b45f291 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -39,7 +39,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_qstor"
-#define DRV_VERSION	"0.06"
+#define DRV_VERSION	"0.07"
 
 enum {
 	QS_MMIO_BAR		= 4,
@@ -446,7 +446,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
 				if ((status & ATA_BUSY))
 					continue;
 				DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
-					ap->id, qc->tf.protocol, status);
+					ap->print_id, qc->tf.protocol, status);
 
 				/* complete taskfile transaction */
 				pp->state = qs_state_idle;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index dca3d3749f0..f7179c646be 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum {
 	SIL_MMIO_BAR		= 5,
@@ -339,7 +339,7 @@ static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_re
 		break;
 	}
 
-	return 0;
+	return NULL;
 }
 
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
@@ -386,9 +386,15 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 		goto freeze;
 	}
 
-	if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
+	if (unlikely(!qc))
 		goto freeze;
 
+	if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+		/* this sometimes happens, just clear IRQ */
+		ata_chk_status(ap);
+		return;
+	}
+
 	/* Check whether we are expecting interrupt in this state */
 	switch (ap->hsm_task_state) {
 	case HSM_ST_FIRST:
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e65e8d55da3..5d083f43f90 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -30,7 +30,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.3"
+#define DRV_VERSION	"0.8"
 
 /*
  * Port request block (PRB) 32 bytes
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 49c9e2bd706..1879e0cd56a 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -40,9 +40,8 @@
 #include <linux/device.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
-#include "libata.h"
+#include "sis.h"
 
-#undef DRV_NAME		/* already defined in libata.h, for libata-core */
 #define DRV_NAME	"sata_sis"
 #define DRV_VERSION	"0.7"
 
@@ -310,7 +309,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		case 0x10:
 			ppi[1] = &sis_info133;
 			break;
-			
+
 		case 0x30:
 			ppi[0] = &sis_info133;
 			break;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 4e428999420..b121195cc59 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -53,7 +53,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME	"sata_svw"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum {
 	K2_FLAG_NO_ATAPI_DMA		= (1 << 29),
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 0ebd77b080d..1a081c3a8c0 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -44,7 +44,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_sx4"
-#define DRV_VERSION	"0.9"
+#define DRV_VERSION	"0.10"
 
 
 enum {
@@ -421,7 +421,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
 
 	WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
 
-	VPRINTK("ata%u: ENTER\n", ap->id);
+	VPRINTK("ata%u: ENTER\n", ap->print_id);
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -478,7 +478,7 @@ static void pdc20621_nodata_prep(struct ata_queued_cmd *qc)
 	unsigned int portno = ap->port_no;
 	unsigned int i;
 
-	VPRINTK("ata%u: ENTER\n", ap->id);
+	VPRINTK("ata%u: ENTER\n", ap->print_id);
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -605,7 +605,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
 
-	VPRINTK("ata%u: ENTER\n", ap->id);
+	VPRINTK("ata%u: ENTER\n", ap->print_id);
 
 	wmb();			/* flush PRD, pkt writes */
 
@@ -672,7 +672,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
 
 		/* step two - DMA from DIMM to host */
 		if (doing_hdma) {
-			VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
+			VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->print_id,
 				readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
 			/* get drive status; clear intr; complete txn */
 			qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
@@ -683,7 +683,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
 		/* step one - exec ATA command */
 		else {
 			u8 seq = (u8) (port_no + 1 + 4);
-			VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id,
+			VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->print_id,
 				readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
 
 			/* submit hdma pkt */
@@ -698,7 +698,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
 		/* step one - DMA from host to DIMM */
 		if (doing_hdma) {
 			u8 seq = (u8) (port_no + 1);
-			VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id,
+			VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->print_id,
 				readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
 
 			/* submit ata pkt */
@@ -711,7 +711,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
 
 		/* step two - execute ATA command */
 		else {
-			VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
+			VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->print_id,
 				readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
 			/* get drive status; clear intr; complete txn */
 			qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 80131eec68f..d659ace80f4 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -36,7 +36,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_uli"
-#define DRV_VERSION	"1.0"
+#define DRV_VERSION	"1.1"
 
 enum {
 	uli_5289		= 0,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index baca6d79bb0..598e6a26a48 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_via"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum board_ids_enum {
 	vt6420,
@@ -60,7 +60,7 @@ enum {
 	SATA_PATA_SHARING	= 0x49, /* PATA/SATA sharing func ctrl */
 	PATA_UDMA_TIMING	= 0xB3, /* PATA timing for DMA/ cable detect */
 	PATA_PIO_TIMING		= 0xAB, /* PATA timing register */
-	
+
 	PORT0			= (1 << 1),
 	PORT1			= (1 << 0),
 	ALL_PORTS		= PORT0 | PORT1,
@@ -151,7 +151,7 @@ static const struct ata_port_operations vt6420_sata_ops = {
 
 static const struct ata_port_operations vt6421_pata_ops = {
 	.port_disable		= ata_port_disable,
-	
+
 	.set_piomode		= vt6421_set_pio_mode,
 	.set_dmamode		= vt6421_set_dma_mode,
 
@@ -185,7 +185,7 @@ static const struct ata_port_operations vt6421_pata_ops = {
 
 static const struct ata_port_operations vt6421_sata_ops = {
 	.port_disable		= ata_port_disable,
-	
+
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
 	.check_status		= ata_check_status,
@@ -423,16 +423,21 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
 {
 	struct ata_probe_ent *probe_ent;
 	struct ata_port_info *ppi[2];
-	void __iomem * const *iomap;
+	void __iomem *bar5;
 
 	ppi[0] = ppi[1] = &vt6420_port_info;
 	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
 	if (!probe_ent)
 		return NULL;
 
-	iomap = pcim_iomap_table(pdev);
-	probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0);
-	probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1);
+	bar5 = pcim_iomap(pdev, 5, 0);
+	if (!bar5) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
+		return NULL;
+	}
+
+	probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0);
+	probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1);
 
 	return probe_ent;
 }
@@ -460,6 +465,13 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
 	probe_ent->mwdma_mask	= 0x07;
 	probe_ent->udma_mask	= 0x7f;
 
+	for (i = 0; i < 6; i++)
+		if (!pcim_iomap(pdev, i, 0)) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "failed to iomap PCI BAR %d\n", i);
+			return NULL;
+		}
+
 	for (i = 0; i < N_PORTS; i++)
 		vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i);
 
@@ -522,7 +534,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME);
+	rc = pci_request_regions(pdev, DRV_NAME);
 	if (rc) {
 		pcim_pin_device(pdev);
 		return rc;
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 2fd037bde09..170bad1b415 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum {
 	VSC_MMIO_BAR			= 0,
@@ -98,10 +98,6 @@ enum {
 			      VSC_SATA_INT_PHY_CHANGE),
 };
 
-#define is_vsc_sata_int_err(port_idx, int_status) \
-	 (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
-
-
 static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	if (sc_reg > SCR_CONTROL)
@@ -119,6 +115,28 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 }
 
 
+static void vsc_freeze(struct ata_port *ap)
+{
+	void __iomem *mask_addr;
+
+	mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+		VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+	writeb(0, mask_addr);
+}
+
+
+static void vsc_thaw(struct ata_port *ap)
+{
+	void __iomem *mask_addr;
+
+	mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+		VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+	writeb(0xff, mask_addr);
+}
+
+
 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
 {
 	void __iomem *mask_addr;
@@ -203,6 +221,36 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
         }
 }
 
+static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
+{
+	if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
+		ata_port_freeze(ap);
+	else
+		ata_port_abort(ap);
+}
+
+static void vsc_port_intr(u8 port_status, struct ata_port *ap)
+{
+	struct ata_queued_cmd *qc;
+	int handled = 0;
+
+	if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
+		vsc_error_intr(port_status, ap);
+		return;
+	}
+
+	qc = ata_qc_from_tag(ap, ap->active_tag);
+	if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
+		handled = ata_host_intr(ap, qc);
+
+	/* We received an interrupt during a polled command,
+	 * or some other spurious condition.  Interrupt reporting
+	 * with this hardware is fairly reliable so it is safe to
+	 * simply clear the interrupt
+	 */
+	if (unlikely(!handled))
+		ata_chk_status(ap);
+}
 
 /*
  * vsc_sata_interrupt
@@ -214,59 +262,36 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
 	struct ata_host *host = dev_instance;
 	unsigned int i;
 	unsigned int handled = 0;
-	u32 int_status;
-
-	spin_lock(&host->lock);
+	u32 status;
 
-	int_status = readl(host->iomap[VSC_MMIO_BAR] +
-			   VSC_SATA_INT_STAT_OFFSET);
+	status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
 
-	for (i = 0; i < host->n_ports; i++) {
-		if (int_status & ((u32) 0xFF << (8 * i))) {
-			struct ata_port *ap;
+	if (unlikely(status == 0xffffffff || status == 0)) {
+		if (status)
+			dev_printk(KERN_ERR, host->dev,
+				": IRQ status == 0xffffffff, "
+				"PCI fault or device removal?\n");
+		goto out;
+	}
 
-			ap = host->ports[i];
+	spin_lock(&host->lock);
 
-			if (is_vsc_sata_int_err(i, int_status)) {
-				u32 err_status;
-				printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
-				err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
-				vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-				handled++;
-			}
+	for (i = 0; i < host->n_ports; i++) {
+		u8 port_status = (status >> (8 * i)) & 0xff;
+		if (port_status) {
+			struct ata_port *ap = host->ports[i];
 
 			if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
-				struct ata_queued_cmd *qc;
-
-				qc = ata_qc_from_tag(ap, ap->active_tag);
-				if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
-					handled += ata_host_intr(ap, qc);
-				else if (is_vsc_sata_int_err(i, int_status)) {
-					/*
-					 * On some chips (i.e. Intel 31244), an error
-					 * interrupt will sneak in at initialization
-					 * time (phy state changes).  Clearing the SCR
-					 * error register is not required, but it prevents
-					 * the phy state change interrupts from recurring
-					 * later.
-					 */
-					u32 err_status;
-					err_status = vsc_sata_scr_read(ap, SCR_ERROR);
-					printk(KERN_DEBUG "%s: clearing interrupt, "
-					       "status %x; sata err status %x\n",
-					       __FUNCTION__,
-					       int_status, err_status);
-					vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-					/* Clear interrupt status */
-					ata_chk_status(ap);
-					handled++;
-				}
-			}
+				vsc_port_intr(port_status, ap);
+				handled++;
+			} else
+				dev_printk(KERN_ERR, host->dev,
+					": interrupt from disabled port %d\n", i);
 		}
 	}
 
 	spin_unlock(&host->lock);
-
+out:
 	return IRQ_RETVAL(handled);
 }
 
@@ -304,8 +329,8 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
+	.freeze			= vsc_freeze,
+	.thaw			= vsc_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.irq_handler		= vsc_sata_interrupt,
diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h
new file mode 100644
index 00000000000..231da8fc220
--- /dev/null
+++ b/drivers/ata/sis.h
@@ -0,0 +1,5 @@
+
+struct ata_port_info;
+
+/* pata_sis.c */
+extern struct ata_port_info sis_info133;