Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (132 commits)
  sh: oprofile: Fix up the module build.
  sh: add UIO support for JPU on SH7722.
  serial: sh-sci: Fix up port pinmux for SH7366.
  sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
  sh: mach-sh03: Fix up pata_platform build breakage.
  sh: enable deferred io LCDC on Migo-R
  video: sh_mobile_lcdcfb deferred io support
  video: deferred io with physically contiguous memory
  video: deferred io cleanup
  video: fix deferred io fsync()
  sh: add LCDC interrupt configuration to AP325 and Migo-R
  sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB
  sh: split coherent pages
  sh: dma: Kill off ISA DMA wrapper.
  sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
  sh: Kill off the unused SH_ALPHANUMERIC debug option.
  sh: Enable skipping of bss on debug platforms for sh32 also.
  doc: Update sh cpufreq documentation.
  sh: mrshpc_setup_windows() needs to be inline.
  serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
  ...

14 files changed, 583 insertions, 595 deletions

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 3384a717fec..6c3d60b939b 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -160,9 +160,39 @@ struct sh_mobile_i2c_data {
 
 static void activate_ch(struct sh_mobile_i2c_data *pd)
 {
+	unsigned long i2c_clk;
+	u_int32_t num;
+	u_int32_t denom;
+	u_int32_t tmp;
+
 	/* Make sure the clock is enabled */
 	clk_enable(pd->clk);
 
+	/* Get clock rate after clock is enabled */
+	i2c_clk = clk_get_rate(pd->clk);
+
+	/* Calculate the value for iccl. From the data sheet:
+	 * iccl = (p clock / transfer rate) * (L / (L + H))
+	 * where L and H are the SCL low/high ratio (5/4 in this case).
+	 * We also round off the result.
+	 */
+	num = i2c_clk * 5;
+	denom = NORMAL_SPEED * 9;
+	tmp = num * 10 / denom;
+	if (tmp % 10 >= 5)
+		pd->iccl = (u_int8_t)((num/denom) + 1);
+	else
+		pd->iccl = (u_int8_t)(num/denom);
+
+	/* Calculate the value for icch. From the data sheet:
+	   icch = (p clock / transfer rate) * (H / (L + H)) */
+	num = i2c_clk * 4;
+	tmp = num * 10 / denom;
+	if (tmp % 10 >= 5)
+		pd->icch = (u_int8_t)((num/denom) + 1);
+	else
+		pd->icch = (u_int8_t)(num/denom);
+
 	/* Enable channel and configure rx ack */
 	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
 
@@ -459,40 +489,6 @@ static struct i2c_algorithm sh_mobile_i2c_algorithm = {
 	.master_xfer	= sh_mobile_i2c_xfer,
 };
 
-static void sh_mobile_i2c_setup_channel(struct platform_device *dev)
-{
-	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
-	unsigned long peripheral_clk = clk_get_rate(pd->clk);
-	u_int32_t num;
-	u_int32_t denom;
-	u_int32_t tmp;
-
-	spin_lock_init(&pd->lock);
-	init_waitqueue_head(&pd->wait);
-
-	/* Calculate the value for iccl. From the data sheet:
-	 * iccl = (p clock / transfer rate) * (L / (L + H))
-	 * where L and H are the SCL low/high ratio (5/4 in this case).
-	 * We also round off the result.
-	 */
-	num = peripheral_clk * 5;
-	denom = NORMAL_SPEED * 9;
-	tmp = num * 10 / denom;
-	if (tmp % 10 >= 5)
-		pd->iccl = (u_int8_t)((num/denom) + 1);
-	else
-		pd->iccl = (u_int8_t)(num/denom);
-
-	/* Calculate the value for icch. From the data sheet:
-	   icch = (p clock / transfer rate) * (H / (L + H)) */
-	num = peripheral_clk * 4;
-	tmp = num * 10 / denom;
-	if (tmp % 10 >= 5)
-		pd->icch = (u_int8_t)((num/denom) + 1);
-	else
-		pd->icch = (u_int8_t)(num/denom);
-}
-
 static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
 {
 	struct resource *res;
@@ -533,6 +529,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	struct sh_mobile_i2c_data *pd;
 	struct i2c_adapter *adap;
 	struct resource *res;
+	char clk_name[8];
 	int size;
 	int ret;
 
@@ -542,9 +539,10 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		return -ENOMEM;
 	}
 
-	pd->clk = clk_get(&dev->dev, "peripheral_clk");
+	snprintf(clk_name, sizeof(clk_name), "i2c%d", dev->id);
+	pd->clk = clk_get(&dev->dev, clk_name);
 	if (IS_ERR(pd->clk)) {
-		dev_err(&dev->dev, "cannot get peripheral clock\n");
+		dev_err(&dev->dev, "cannot get clock \"%s\"\n", clk_name);
 		ret = PTR_ERR(pd->clk);
 		goto err;
 	}
@@ -586,7 +584,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 
 	strlcpy(adap->name, dev->name, sizeof(adap->name));
 
-	sh_mobile_i2c_setup_channel(dev);
+	spin_lock_init(&pd->lock);
+	init_waitqueue_head(&pd->wait);
 
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret < 0) {
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index c600ab7f93e..5c8a1bcf7ca 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <asm/sh_keysc.h>
 
@@ -39,6 +40,7 @@ static const struct {
 
 struct sh_keysc_priv {
 	void __iomem *iomem_base;
+	struct clk *clk;
 	unsigned long last_keys;
 	struct input_dev *input;
 	struct sh_keysc_info pdata;
@@ -125,6 +127,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	struct sh_keysc_info *pdata;
 	struct resource *res;
 	struct input_dev *input;
+	char clk_name[8];
 	int i, k;
 	int irq, error;
 
@@ -165,11 +168,19 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
+	snprintf(clk_name, sizeof(clk_name), "keysc%d", pdev->id);
+	priv->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		error = PTR_ERR(priv->clk);
+		goto err2;
+	}
+
 	priv->input = input_allocate_device();
 	if (!priv->input) {
 		dev_err(&pdev->dev, "failed to allocate input device\n");
 		error = -ENOMEM;
-		goto err2;
+		goto err3;
 	}
 
 	input = priv->input;
@@ -187,7 +198,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto err3;
+		goto err4;
 	}
 
 	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
@@ -199,18 +210,22 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err4;
+		goto err5;
 	}
 
+	clk_enable(priv->clk);
+
 	iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
 		  pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
 	iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
 	iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
 	return 0;
- err4:
+ err5:
 	free_irq(irq, pdev);
- err3:
+ err4:
 	input_free_device(input);
+ err3:
+	clk_put(priv->clk);
  err2:
 	iounmap(priv->iomem_base);
  err1:
@@ -230,6 +245,9 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev)
 	free_irq(platform_get_irq(pdev, 0), pdev);
 	iounmap(priv->iomem_base);
 
+	clk_disable(priv->clk);
+	clk_put(priv->clk);
+
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 	return 0;
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 47102c2c825..057fd7e160c 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -759,7 +759,7 @@ config VIDEO_PXA27x
 
 config VIDEO_SH_MOBILE_CEU
 	tristate "SuperH Mobile CEU Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA
+	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
 	select VIDEOBUF_DMA_CONTIG
 	---help---
 	  This is a v4l2 driver for the SuperH Mobile CEU Interface
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 2407607f2ef..536b1a9b310 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -31,6 +31,7 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/videodev2.h>
+#include <linux/clk.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
@@ -89,6 +90,7 @@ struct sh_mobile_ceu_dev {
 
 	unsigned int irq;
 	void __iomem *base;
+	struct clk *clk;
 	unsigned long video_limit;
 
 	/* lock used to protect videobuf */
@@ -309,6 +311,8 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 	if (ret)
 		goto err;
 
+	clk_enable(pcdev->clk);
+
 	ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
 	while (ceu_read(pcdev, CSTSR) & 1)
 		msleep(1);
@@ -342,6 +346,8 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 	}
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
+	clk_disable(pcdev->clk);
+
 	icd->ops->release(icd);
 
 	dev_info(&icd->dev,
@@ -550,6 +556,7 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 	struct sh_mobile_ceu_dev *pcdev;
 	struct resource *res;
 	void __iomem *base;
+	char clk_name[8];
 	unsigned int irq;
 	int err = 0;
 
@@ -615,6 +622,14 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 		goto exit_release_mem;
 	}
 
+	snprintf(clk_name, sizeof(clk_name), "ceu%d", pdev->id);
+	pcdev->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(pcdev->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		err = PTR_ERR(pcdev->clk);
+		goto exit_free_irq;
+	}
+
 	pcdev->ici.priv = pcdev;
 	pcdev->ici.dev.parent = &pdev->dev;
 	pcdev->ici.nr = pdev->id;
@@ -623,10 +638,12 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 
 	err = soc_camera_host_register(&pcdev->ici);
 	if (err)
-		goto exit_free_irq;
+		goto exit_free_clk;
 
 	return 0;
 
+exit_free_clk:
+	clk_put(pcdev->clk);
 exit_free_irq:
 	free_irq(pcdev->irq, pcdev);
 exit_release_mem:
@@ -645,6 +662,7 @@ static int sh_mobile_ceu_remove(struct platform_device *pdev)
 	struct sh_mobile_ceu_dev *pcdev = platform_get_drvdata(pdev);
 
 	soc_camera_host_unregister(&pcdev->ici);
+	clk_put(pcdev->clk);
 	free_irq(pcdev->irq, pcdev);
 	if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
 		dma_release_declared_memory(&pdev->dev);
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 165fc010978..557b54ab2f2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -51,7 +51,6 @@
 #ifdef CONFIG_SUPERH
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
-#include <asm/kgdb.h>
 #endif
 
 #include "sh-sci.h"
@@ -65,10 +64,6 @@ struct sci_port {
 	/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
 	unsigned int		irqs[SCIx_NR_IRQS];
 
-	/* Port pin configuration */
-	void			(*init_pins)(struct uart_port *port,
-					     unsigned int cflag);
-
 	/* Port enable callback */
 	void			(*enable)(struct uart_port *port);
 
@@ -85,10 +80,6 @@ struct sci_port {
 #endif
 };
 
-#ifdef CONFIG_SH_KGDB
-static struct sci_port *kgdb_sci_port;
-#endif
-
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
 static struct sci_port *serial_console_port;
 #endif
@@ -101,21 +92,26 @@ static void sci_stop_tx(struct uart_port *port);
 static struct sci_port sci_ports[SCI_NPORTS];
 static struct uart_driver sci_uart_driver;
 
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
-    defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+static inline struct sci_port *
+to_sci_port(struct uart_port *uart)
+{
+	return container_of(uart, struct sci_port, port);
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+
+#ifdef CONFIG_CONSOLE_POLL
 static inline void handle_error(struct uart_port *port)
 {
 	/* Clear error flags */
 	sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
 }
 
-static int get_char(struct uart_port *port)
+static int sci_poll_get_char(struct uart_port *port)
 {
-	unsigned long flags;
 	unsigned short status;
 	int c;
 
-	spin_lock_irqsave(&port->lock, flags);
 	do {
 		status = sci_in(port, SCxSR);
 		if (status & SCxSR_ERRORS(port)) {
@@ -123,23 +119,21 @@ static int get_char(struct uart_port *port)
 			continue;
 		}
 	} while (!(status & SCxSR_RDxF(port)));
+
 	c = sci_in(port, SCxRDR);
-	sci_in(port, SCxSR);            /* Dummy read */
+
+	/* Dummy read */
+	sci_in(port, SCxSR);
 	sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
-	spin_unlock_irqrestore(&port->lock, flags);
 
 	return c;
 }
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+#endif
 
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
-static void put_char(struct uart_port *port, char c)
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
 {
-	unsigned long flags;
 	unsigned short status;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	do {
 		status = sci_in(port, SCxSR);
 	} while (!(status & SCxSR_TDxE(port)));
@@ -147,96 +141,22 @@ static void put_char(struct uart_port *port, char c)
 	sci_in(port, SCxSR);            /* Dummy read */
 	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
 	sci_out(port, SCxTDR, c);
-
-	spin_unlock_irqrestore(&port->lock, flags);
 }
-#endif
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static void put_string(struct sci_port *sci_port, const char *buffer, int count)
-{
-	struct uart_port *port = &sci_port->port;
-	const unsigned char *p = buffer;
-	int i;
-
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
-	int checksum;
-	int usegdb=0;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-	/* This call only does a trap the first time it is
-	 * called, and so is safe to do here unconditionally
-	 */
-	usegdb |= sh_bios_in_gdb_mode();
-#endif
-#ifdef CONFIG_SH_KGDB
-	usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
-#endif
-
-	if (usegdb) {
-	    /*  $<packet info>#<checksum>. */
-	    do {
-		unsigned char c;
-		put_char(port, '$');
-		put_char(port, 'O'); /* 'O'utput to console */
-		checksum = 'O';
-
-		for (i=0; i<count; i++) { /* Don't use run length encoding */
-			int h, l;
-
-			c = *p++;
-			h = hex_asc_hi(c);
-			l = hex_asc_lo(c);
-			put_char(port, h);
-			put_char(port, l);
-			checksum += h + l;
-		}
-		put_char(port, '#');
-		put_char(port, hex_asc_hi(checksum));
-		put_char(port, hex_asc_lo(checksum));
-	    } while  (get_char(port) != '+');
-	} else
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
-	for (i=0; i<count; i++) {
-		if (*p == 10)
-			put_char(port, '\r');
-		put_char(port, *p++);
-	}
-}
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-
-#ifdef CONFIG_SH_KGDB
-static int kgdb_sci_getchar(void)
-{
-        int c;
-
-        /* Keep trying to read a character, this could be neater */
-        while ((c = get_char(&kgdb_sci_port->port)) < 0)
-		cpu_relax();
-
-        return c;
-}
-
-static inline void kgdb_sci_putchar(int c)
-{
-        put_char(&kgdb_sci_port->port, c);
-}
-#endif /* CONFIG_SH_KGDB */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 #if defined(__H8300S__)
 enum { sci_disable, sci_enable };
 
-static void h8300_sci_config(struct uart_port* port, unsigned int ctrl)
+static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
 {
-	volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+	volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
 	int ch = (port->mapbase  - SMR0) >> 3;
 	unsigned char mask = 1 << (ch+1);
 
-	if (ctrl == sci_disable) {
+	if (ctrl == sci_disable)
 		*mstpcrl |= mask;
-	} else {
+	else
 		*mstpcrl &= ~mask;
-	}
 }
 
 static inline void h8300_sci_enable(struct uart_port *port)
@@ -251,7 +171,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
 #endif
 
 #if defined(__H8300H__) || defined(__H8300S__)
-static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
 	int ch = (port->mapbase - SMR0) >> 3;
 
@@ -266,141 +186,99 @@ static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
 	/* tx mark output*/
 	H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
 }
-#else
-#define sci_init_pins_sci NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
-
-	if (cflag & CRTSCTS)
-		fcr_val |= SCFCR_MCE;
-
-	sci_out(port, SCFCR, fcr_val);
-}
-#else
-#define sci_init_pins_irda NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
-{
-	unsigned int fcr_val = 0;
-
-	set_sh771x_scif_pfc(port);
-	if (cflag & CRTSCTS) {
-		fcr_val |= SCFCR_MCE;
-	}
-	sci_out(port, SCFCR, fcr_val);
+	if (port->mapbase == 0xA4400000) {
+		__raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+		__raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+	} else if (port->mapbase == 0xA4410000)
+		__raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	if (cflag & CRTSCTS) {
 		/* enable RTS/CTS */
 		if (port->mapbase == 0xa4430000) { /* SCIF0 */
 			/* Clear PTCR bit 9-2; enable all scif pins but sck */
-			data = ctrl_inw(PORT_PTCR);
-			ctrl_outw((data & 0xfc03), PORT_PTCR);
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xfc03), PORT_PTCR);
 		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
 			/* Clear PVCR bit 9-2 */
-			data = ctrl_inw(PORT_PVCR);
-			ctrl_outw((data & 0xfc03), PORT_PVCR);
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xfc03), PORT_PVCR);
 		}
-		fcr_val |= SCFCR_MCE;
 	} else {
 		if (port->mapbase == 0xa4430000) { /* SCIF0 */
 			/* Clear PTCR bit 5-2; enable only tx and rx  */
-			data = ctrl_inw(PORT_PTCR);
-			ctrl_outw((data & 0xffc3), PORT_PTCR);
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xffc3), PORT_PTCR);
 		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
 			/* Clear PVCR bit 5-2 */
-			data = ctrl_inw(PORT_PVCR);
-			ctrl_outw((data & 0xffc3), PORT_PVCR);
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xffc3), PORT_PVCR);
 		}
 	}
-	sci_out(port, SCFCR, fcr_val);
 }
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	/* We need to set SCPCR to enable RTS/CTS */
-	data = ctrl_inw(SCPCR);
+	data = __raw_readw(SCPCR);
 	/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
-	ctrl_outw(data & 0x0fcf, SCPCR);
+	__raw_writew(data & 0x0fcf, SCPCR);
 
-	if (cflag & CRTSCTS)
-		fcr_val |= SCFCR_MCE;
-	else {
+	if (!(cflag & CRTSCTS)) {
 		/* We need to set SCPCR to enable RTS/CTS */
-		data = ctrl_inw(SCPCR);
+		data = __raw_readw(SCPCR);
 		/* Clear out SCP7MD1,0, SCP4MD1,0,
 		   Set SCP6MD1,0 = {01} (output)  */
-		ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
+		__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
 
 		data = ctrl_inb(SCPDR);
 		/* Set /RTS2 (bit6) = 0 */
 		ctrl_outb(data & 0xbf, SCPDR);
 	}
-
-	sci_out(port, SCFCR, fcr_val);
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
-	unsigned int fcr_val = 0;
 	unsigned short data;
 
 	if (port->mapbase == 0xffe00000) {
-		data = ctrl_inw(PSCR);
+		data = __raw_readw(PSCR);
 		data &= ~0x03cf;
-		if (cflag & CRTSCTS)
-			fcr_val |= SCFCR_MCE;
-		else
+		if (!(cflag & CRTSCTS))
 			data |= 0x0340;
 
-		ctrl_outw(data, PSCR);
+		__raw_writew(data, PSCR);
 	}
-	/* SCIF1 and SCIF2 should be setup by board code */
-
-	sci_out(port, SCFCR, fcr_val);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
-	/* Nothing to do here.. */
-	sci_out(port, SCFCR, 0);
 }
-#else
-/* For SH7750 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
-	unsigned int fcr_val = 0;
-
-	if (cflag & CRTSCTS) {
-		fcr_val |= SCFCR_MCE;
-	} else {
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
-		/* Nothing */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780) || \
       defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SHX3)
-		ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (!(cflag & CRTSCTS))
+		__raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
+}
+#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (!(cflag & CRTSCTS))
+		__raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
+}
 #else
-		ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
-#endif
-	}
-	sci_out(port, SCFCR, fcr_val);
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	/* Nothing to do */
 }
 #endif
 
@@ -419,18 +297,26 @@ static inline int scif_rxroom(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 static inline int scif_txroom(struct uart_port *port)
 {
-	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+	if ((port->mapbase == 0xffe00000) ||
+	    (port->mapbase == 0xffe08000)) {
+		/* SCIF0/1*/
 		return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
-	else /* SCIF2 */
+	} else {
+		/* SCIF2 */
 		return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+	}
 }
 
 static inline int scif_rxroom(struct uart_port *port)
 {
-	if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+	if ((port->mapbase == 0xffe00000) ||
+	    (port->mapbase == 0xffe08000)) {
+		/* SCIF0/1*/
 		return sci_in(port, SCRFDR) & 0xff;
-	else /* SCIF2 */
+	} else {
+		/* SCIF2 */
 		return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+	}
 }
 #else
 static inline int scif_txroom(struct uart_port *port)
@@ -446,12 +332,12 @@ static inline int scif_rxroom(struct uart_port *port)
 
 static inline int sci_txroom(struct uart_port *port)
 {
-	return ((sci_in(port, SCxSR) & SCI_TDRE) != 0);
+	return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
 }
 
 static inline int sci_rxroom(struct uart_port *port)
 {
-	return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0);
+	return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
 }
 
 /* ********************************************************************** *
@@ -469,11 +355,10 @@ static void sci_transmit_chars(struct uart_port *port)
 	status = sci_in(port, SCxSR);
 	if (!(status & SCxSR_TDxE(port))) {
 		ctrl = sci_in(port, SCSCR);
-		if (uart_circ_empty(xmit)) {
+		if (uart_circ_empty(xmit))
 			ctrl &= ~SCI_CTRL_FLAGS_TIE;
-		} else {
+		else
 			ctrl |= SCI_CTRL_FLAGS_TIE;
-		}
 		sci_out(port, SCSCR, ctrl);
 		return;
 	}
@@ -521,11 +406,11 @@ static void sci_transmit_chars(struct uart_port *port)
 }
 
 /* On SH3, SCIF may read end-of-break as a space->mark char */
-#define STEPFN(c)  ({int __c=(c); (((__c-1)|(__c)) == -1); })
+#define STEPFN(c)  ({int __c = (c); (((__c-1)|(__c)) == -1); })
 
 static inline void sci_receive_chars(struct uart_port *port)
 {
-	struct sci_port *sci_port = (struct sci_port *)port;
+	struct sci_port *sci_port = to_sci_port(port);
 	struct tty_struct *tty = port->info->port.tty;
 	int i, count, copied = 0;
 	unsigned short status;
@@ -550,13 +435,13 @@ static inline void sci_receive_chars(struct uart_port *port)
 
 		if (port->type == PORT_SCI) {
 			char c = sci_in(port, SCxRDR);
-			if (uart_handle_sysrq_char(port, c) || sci_port->break_flag)
+			if (uart_handle_sysrq_char(port, c) ||
+			    sci_port->break_flag)
 				count = 0;
-			else {
+			else
 				tty_insert_flip_char(tty, c, TTY_NORMAL);
-			}
 		} else {
-			for (i=0; i<count; i++) {
+			for (i = 0; i < count; i++) {
 				char c = sci_in(port, SCxRDR);
 				status = sci_in(port, SCxSR);
 #if defined(CONFIG_CPU_SH3)
@@ -569,7 +454,7 @@ static inline void sci_receive_chars(struct uart_port *port)
 					}
 
 					/* Nonzero => end-of-break */
-					pr_debug("scif: debounce<%02x>\n", c);
+					dev_dbg(port->dev, "debounce<%02x>\n", c);
 					sci_port->break_flag = 0;
 
 					if (STEPFN(c)) {
@@ -586,12 +471,13 @@ static inline void sci_receive_chars(struct uart_port *port)
 				/* Store data and status */
 				if (status&SCxSR_FER(port)) {
 					flag = TTY_FRAME;
-					pr_debug("sci: frame error\n");
+					dev_notice(port->dev, "frame error\n");
 				} else if (status&SCxSR_PER(port)) {
 					flag = TTY_PARITY;
-					pr_debug("sci: parity error\n");
+					dev_notice(port->dev, "parity error\n");
 				} else
 					flag = TTY_NORMAL;
+
 				tty_insert_flip_char(tty, c, flag);
 			}
 		}
@@ -651,13 +537,14 @@ static inline int sci_handle_errors(struct uart_port *port)
 		/* overrun error */
 		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
 			copied++;
-		pr_debug("sci: overrun error\n");
+
+		dev_notice(port->dev, "overrun error");
 	}
 
 	if (status & SCxSR_FER(port)) {
 		if (sci_rxd_in(port) == 0) {
 			/* Notify of BREAK */
-			struct sci_port *sci_port = (struct sci_port *)port;
+			struct sci_port *sci_port = to_sci_port(port);
 
 			if (!sci_port->break_flag) {
 				sci_port->break_flag = 1;
@@ -666,15 +553,19 @@ static inline int sci_handle_errors(struct uart_port *port)
 				/* Do sysrq handling. */
 				if (uart_handle_break(port))
 					return 0;
-			        pr_debug("sci: BREAK detected\n");
+
+				dev_dbg(port->dev, "BREAK detected\n");
+
 				if (tty_insert_flip_char(tty, 0, TTY_BREAK))
-				        copied++;
-                       }
+					copied++;
+			}
+
 		} else {
 			/* frame error */
 			if (tty_insert_flip_char(tty, 0, TTY_FRAME))
 				copied++;
-			pr_debug("sci: frame error\n");
+
+			dev_notice(port->dev, "frame error\n");
 		}
 	}
 
@@ -682,7 +573,8 @@ static inline int sci_handle_errors(struct uart_port *port)
 		/* parity error */
 		if (tty_insert_flip_char(tty, 0, TTY_PARITY))
 			copied++;
-		pr_debug("sci: parity error\n");
+
+		dev_notice(port->dev, "parity error");
 	}
 
 	if (copied)
@@ -691,6 +583,27 @@ static inline int sci_handle_errors(struct uart_port *port)
 	return copied;
 }
 
+static inline int sci_handle_fifo_overrun(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+	int copied = 0;
+
+	if (port->type != PORT_SCIF)
+		return 0;
+
+	if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+		sci_out(port, SCLSR, 0);
+
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		tty_flip_buffer_push(tty);
+
+		dev_notice(port->dev, "overrun error\n");
+		copied++;
+	}
+
+	return copied;
+}
+
 static inline int sci_handle_breaks(struct uart_port *port)
 {
 	int copied = 0;
@@ -709,23 +622,15 @@ static inline int sci_handle_breaks(struct uart_port *port)
 		/* Notify of BREAK */
 		if (tty_insert_flip_char(tty, 0, TTY_BREAK))
 			copied++;
-		pr_debug("sci: BREAK detected\n");
-	}
 
-#if defined(SCIF_ORER)
-	/* XXX: Handle SCIF overrun error */
-	if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
-		sci_out(port, SCLSR, 0);
-		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
-			copied++;
-			pr_debug("sci: overrun error\n");
-		}
+		dev_dbg(port->dev, "BREAK detected\n");
 	}
-#endif
 
 	if (copied)
 		tty_flip_buffer_push(tty);
 
+	copied += sci_handle_fifo_overrun(port);
+
 	return copied;
 }
 
@@ -763,16 +668,7 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
 			sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
 		}
 	} else {
-#if defined(SCIF_ORER)
-		if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
-			struct tty_struct *tty = port->info->port.tty;
-
-			sci_out(port, SCLSR, 0);
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-			tty_flip_buffer_push(tty);
-			pr_debug("scif: overrun error\n");
-		}
-#endif
+		sci_handle_fifo_overrun(port);
 		sci_rx_interrupt(irq, ptr);
 	}
 
@@ -801,8 +697,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	struct uart_port *port = ptr;
 	irqreturn_t ret = IRQ_NONE;
 
-        ssr_status = sci_in(port,SCxSR);
-        scr_status = sci_in(port,SCSCR);
+	ssr_status = sci_in(port, SCxSR);
+	scr_status = sci_in(port, SCSCR);
 
 	/* Tx Interrupt */
 	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
@@ -820,7 +716,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	return ret;
 }
 
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 /*
  * Here we define a transistion notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
@@ -828,41 +724,20 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 static int sci_notifier(struct notifier_block *self,
 			unsigned long phase, void *p)
 {
-	struct cpufreq_freqs *freqs = p;
 	int i;
 
 	if ((phase == CPUFREQ_POSTCHANGE) ||
-	    (phase == CPUFREQ_RESUMECHANGE)){
+	    (phase == CPUFREQ_RESUMECHANGE))
 		for (i = 0; i < SCI_NPORTS; i++) {
-			struct uart_port *port = &sci_ports[i].port;
-			struct clk *clk;
-
-			/*
-			 * Update the uartclk per-port if frequency has
-			 * changed, since it will no longer necessarily be
-			 * consistent with the old frequency.
-			 *
-			 * Really we want to be able to do something like
-			 * uart_change_speed() or something along those lines
-			 * here to implicitly reset the per-port baud rate..
-			 *
-			 * Clean this up later..
-			 */
-			clk = clk_get(NULL, "module_clk");
-			port->uartclk = clk_get_rate(clk);
-			clk_put(clk);
+			struct sci_port *s = &sci_ports[i];
+			s->port.uartclk = clk_get_rate(s->clk);
 		}
 
-		printk(KERN_INFO "%s: got a postchange notification "
-		       "for cpu %d (old %d, new %d)\n",
-		       __func__, freqs->cpu, freqs->old, freqs->new);
-	}
-
 	return NOTIFY_OK;
 }
 
 static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
+#endif
 
 static int sci_request_irq(struct sci_port *port)
 {
@@ -875,23 +750,22 @@ static int sci_request_irq(struct sci_port *port)
 			       "SCI Transmit Data Empty", "SCI Break" };
 
 	if (port->irqs[0] == port->irqs[1]) {
-		if (!port->irqs[0]) {
-			printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
+		if (unlikely(!port->irqs[0]))
 			return -ENODEV;
-		}
 
 		if (request_irq(port->irqs[0], sci_mpxed_interrupt,
 				IRQF_DISABLED, "sci", port)) {
-			printk(KERN_ERR "sci: Cannot allocate irq.\n");
+			dev_err(port->port.dev, "Can't allocate IRQ\n");
 			return -ENODEV;
 		}
 	} else {
 		for (i = 0; i < ARRAY_SIZE(handlers); i++) {
-			if (!port->irqs[i])
+			if (unlikely(!port->irqs[i]))
 				continue;
+
 			if (request_irq(port->irqs[i], handlers[i],
 					IRQF_DISABLED, desc[i], port)) {
-				printk(KERN_ERR "sci: Cannot allocate irq.\n");
+				dev_err(port->port.dev, "Can't allocate IRQ\n");
 				return -ENODEV;
 			}
 		}
@@ -904,12 +778,9 @@ static void sci_free_irq(struct sci_port *port)
 {
 	int i;
 
-        if (port->irqs[0] == port->irqs[1]) {
-                if (!port->irqs[0])
-                        printk("sci: sci_free_irq error\n");
-		else
-                        free_irq(port->irqs[0], port);
-        } else {
+	if (port->irqs[0] == port->irqs[1])
+		free_irq(port->irqs[0], port);
+	else {
 		for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
 			if (!port->irqs[i])
 				continue;
@@ -1028,7 +899,6 @@ static void sci_shutdown(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
-	struct sci_port *s = &sci_ports[port->line];
 	unsigned int status, baud, smr_val;
 	int t = -1;
 
@@ -1060,32 +930,36 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	sci_out(port, SCSMR, smr_val);
 
 	if (t > 0) {
-		if(t >= 256) {
+		if (t >= 256) {
 			sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
 			t >>= 2;
-		} else {
+		} else
 			sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
-		}
+
 		sci_out(port, SCBRR, t);
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
 	}
 
-	if (likely(s->init_pins))
-		s->init_pins(port, termios->c_cflag);
+	sci_init_pins(port, termios->c_cflag);
+	sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
 
 	sci_out(port, SCSCR, SCSCR_INIT(port));
 
 	if ((termios->c_cflag & CREAD) != 0)
-              sci_start_rx(port,0);
+		sci_start_rx(port, 0);
 }
 
 static const char *sci_type(struct uart_port *port)
 {
 	switch (port->type) {
-		case PORT_SCI:	return "sci";
-		case PORT_SCIF:	return "scif";
-		case PORT_IRDA: return "irda";
-		case PORT_SCIFA:	return "scifa";
+	case PORT_IRDA:
+		return "irda";
+	case PORT_SCI:
+		return "sci";
+	case PORT_SCIF:
+		return "scif";
+	case PORT_SCIFA:
+		return "scifa";
 	}
 
 	return NULL;
@@ -1108,19 +982,6 @@ static void sci_config_port(struct uart_port *port, int flags)
 
 	port->type = s->type;
 
-	switch (port->type) {
-	case PORT_SCI:
-		s->init_pins = sci_init_pins_sci;
-		break;
-	case PORT_SCIF:
-	case PORT_SCIFA:
-		s->init_pins = sci_init_pins_scif;
-		break;
-	case PORT_IRDA:
-		s->init_pins = sci_init_pins_irda;
-		break;
-	}
-
 	if (port->flags & UPF_IOREMAP && !port->membase) {
 #if defined(CONFIG_SUPERH64)
 		port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
@@ -1129,7 +990,7 @@ static void sci_config_port(struct uart_port *port, int flags)
 		port->membase = ioremap_nocache(port->mapbase, 0x40);
 #endif
 
-		printk(KERN_ERR "sci: can't remap port#%d\n", port->line);
+		dev_err(port->dev, "can't remap port#%d\n", port->line);
 	}
 }
 
@@ -1163,6 +1024,10 @@ static struct uart_ops sci_uart_ops = {
 	.request_port	= sci_request_port,
 	.config_port	= sci_config_port,
 	.verify_port	= sci_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= sci_poll_get_char,
+	.poll_put_char	= sci_poll_put_char,
+#endif
 };
 
 static void __init sci_init_ports(void)
@@ -1229,7 +1094,15 @@ int __init early_sci_setup(struct uart_port *port)
 static void serial_console_write(struct console *co, const char *s,
 				 unsigned count)
 {
-	put_string(serial_console_port, s, count);
+	struct uart_port *port = &serial_console_port->port;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		if (*s == 10)
+			sci_poll_put_char(port, '\r');
+
+		sci_poll_put_char(port, *s++);
+	}
 }
 
 static int __init serial_console_setup(struct console *co, char *options)
@@ -1307,89 +1180,8 @@ static int __init sci_console_init(void)
 console_initcall(sci_console_init);
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
-#ifdef CONFIG_SH_KGDB_CONSOLE
-/*
- * FIXME: Most of this can go away.. at the moment, we rely on
- * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
- * most of that can easily be done here instead.
- *
- * For the time being, just accept the values that were parsed earlier..
- */
-static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
-					    int *parity, int *bits)
-{
-	*baud = kgdb_baud;
-	*parity = tolower(kgdb_parity);
-	*bits = kgdb_bits - '0';
-}
-
-/*
- * The naming here is somewhat misleading, since kgdb_console_setup() takes
- * care of the early-on initialization for kgdb, regardless of whether we
- * actually use kgdb as a console or not.
- *
- * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
- */
-int __init kgdb_console_setup(struct console *co, char *options)
-{
-	struct uart_port *port = &sci_ports[kgdb_portnum].port;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (co->index != kgdb_portnum)
-		co->index = kgdb_portnum;
-
-	kgdb_sci_port = &sci_ports[co->index];
-	port = &kgdb_sci_port->port;
-
-	/*
-	 * Also need to check port->type, we don't actually have any
-	 * UPIO_PORT ports, but uart_report_port() handily misreports
-	 * it anyways if we don't have a port available by the time this is
-	 * called.
-	 */
-	if (!port->type)
-		return -ENODEV;
-	if (!port->membase || !port->mapbase)
-		return -ENODEV;
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	else
-		kgdb_console_get_options(port, &baud, &parity, &bits);
-
-	kgdb_getchar = kgdb_sci_getchar;
-	kgdb_putchar = kgdb_sci_putchar;
-
-	return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct console kgdb_console = {
-	.name		= "ttySC",
-	.device		= uart_console_device,
-	.write		= kgdb_console_write,
-	.setup		= kgdb_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &sci_uart_driver,
-};
-
-/* Register the KGDB console so we get messages (d'oh!) */
-static int __init kgdb_console_init(void)
-{
-	sci_init_ports();
-	register_console(&kgdb_console);
-	return 0;
-}
-console_initcall(kgdb_console_init);
-#endif /* CONFIG_SH_KGDB_CONSOLE */
-
-#if defined(CONFIG_SH_KGDB_CONSOLE)
-#define SCI_CONSOLE	&kgdb_console
-#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-#define SCI_CONSOLE	&serial_console
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#define SCI_CONSOLE	(&serial_console)
 #else
 #define SCI_CONSOLE	0
 #endif
@@ -1463,15 +1255,8 @@ static int __devinit sci_probe(struct platform_device *dev)
 		uart_add_one_port(&sci_uart_driver, &sciport->port);
 	}
 
-#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
-	kgdb_sci_port	= &sci_ports[kgdb_portnum];
-	kgdb_getchar	= kgdb_sci_getchar;
-	kgdb_putchar	= kgdb_sci_putchar;
-#endif
-
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-	dev_info(&dev->dev, "CPU frequency notifier registered\n");
 #endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
@@ -1491,6 +1276,10 @@ static int __devexit sci_remove(struct platform_device *dev)
 {
 	int i;
 
+#ifdef CONFIG_HAVE_CLK
+	cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
 	for (i = 0; i < SCI_NPORTS; i++)
 		uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
 
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 9f33b064172..38c600c0dbb 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,13 +133,20 @@
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
 # define SCIF_OPER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
 # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
 # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
 # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
 # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
+# if defined(CONFIG_CPU_SUBTYPE_SH7201)
+#  define SCSPTR4 0xfffeA020 /* 16 bit SCIF */
+#  define SCSPTR5 0xfffeA820 /* 16 bit SCIF */
+#  define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
+#  define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
+# endif
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
@@ -225,6 +232,10 @@
 # define SCIF_TXROOM_MAX 16
 #endif
 
+#ifndef SCIF_ORER
+#define SCIF_ORER	0x0000
+#endif
+
 #define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
 #define SCxSR_ERRORS(port)	(((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
 #define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
@@ -232,12 +243,7 @@
 #define SCxSR_FER(port)		(((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
 #define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 #define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
-#else
-# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
-#endif
+#define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER	 : SCIF_ORER)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
@@ -501,18 +507,6 @@ static inline int sci_rxd_in(struct uart_port *port)
 {
 	  return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
 }
-static inline void set_sh771x_scif_pfc(struct uart_port *port)
-{
-	if (port->mapbase == 0xA4400000){
-		ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR);
-		ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR);
-		return;
-	}
-	if (port->mapbase == 0xA4410000){
-		ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR);
-		return;
-	}
-}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 static inline int sci_rxd_in(struct uart_port *port)
@@ -664,7 +658,8 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
 static inline int sci_rxd_in(struct uart_port *port)
@@ -677,6 +672,16 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe9800)
 		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+	if (port->mapbase == 0xfffeA000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffeA800)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffeB000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffeB800)
+		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#endif
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 77b44fb48f0..3a8879ec206 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -623,7 +623,6 @@ static void start_ep0(struct m66592_ep *ep, struct m66592_request *req)
 #if defined(CONFIG_SUPERH_BUILT_IN_M66592)
 static void init_controller(struct m66592 *m66592)
 {
-	usbf_start_clock();
 	m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);		/* High spd */
 	m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
 	m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
@@ -671,9 +670,7 @@ static void init_controller(struct m66592 *m66592)
 
 static void disable_controller(struct m66592 *m66592)
 {
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	usbf_stop_clock();
-#else
+#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
 	m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
 	udelay(1);
 	m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG);
@@ -686,9 +683,7 @@ static void disable_controller(struct m66592 *m66592)
 
 static void m66592_start_xclock(struct m66592 *m66592)
 {
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	usbf_start_clock();
-#else
+#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
 	u16 tmp;
 
 	tmp = m66592_read(m66592, M66592_SYSCFG);
@@ -1539,7 +1534,10 @@ static int __exit m66592_remove(struct platform_device *pdev)
 	iounmap(m66592->reg);
 	free_irq(platform_get_irq(pdev, 0), m66592);
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
-	usbf_stop_clock();
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+	clk_disable(m66592->clk);
+	clk_put(m66592->clk);
+#endif
 	kfree(m66592);
 	return 0;
 }
@@ -1556,6 +1554,9 @@ static int __init m66592_probe(struct platform_device *pdev)
 	int irq;
 	void __iomem *reg = NULL;
 	struct m66592 *m66592 = NULL;
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+	char clk_name[8];
+#endif
 	int ret = 0;
 	int i;
 
@@ -1614,6 +1615,16 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+	snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
+	m66592->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(m66592->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		ret = PTR_ERR(m66592->clk);
+		goto clean_up2;
+	}
+	clk_enable(m66592->clk);
+#endif
 	INIT_LIST_HEAD(&m66592->gadget.ep_list);
 	m66592->gadget.ep0 = &m66592->ep[0].ep;
 	INIT_LIST_HEAD(&m66592->gadget.ep0->ep_list);
@@ -1645,7 +1656,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 
 	m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL);
 	if (m66592->ep0_req == NULL)
-		goto clean_up2;
+		goto clean_up3;
 	m66592->ep0_req->complete = nop_completion;
 
 	init_controller(m66592);
@@ -1653,7 +1664,12 @@ static int __init m66592_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
 	return 0;
 
+clean_up3:
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+	clk_disable(m66592->clk);
+	clk_put(m66592->clk);
 clean_up2:
+#endif
 	free_irq(irq, m66592);
 clean_up:
 	if (m66592) {
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index f118f00f146..286ce07e796 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -23,6 +23,10 @@
 #ifndef __M66592_UDC_H__
 #define __M66592_UDC_H__
 
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+#include <linux/clk.h>
+#endif
+
 #define M66592_SYSCFG		0x00
 #define M66592_XTAL		0xC000	/* b15-14: Crystal selection */
 #define   M66592_XTAL48		 0x8000		/* 48MHz */
@@ -476,6 +480,9 @@ struct m66592_ep {
 struct m66592 {
 	spinlock_t		lock;
 	void __iomem		*reg;
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+	struct clk *clk;
+#endif
 
 	struct usb_gadget		gadget;
 	struct usb_gadget_driver	*driver;
@@ -604,26 +611,6 @@ static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
 #define m66592_bset(m66592, val, offset)	\
 			m66592_mdfy(m66592, val, 0, offset)
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-#include <asm/io.h>
-#define MSTPCR2		0xA4150038	/* for SH7722 */
-#define MSTPCR2_USB	0x00000800
-
-static inline void usbf_start_clock(void)
-{
-	ctrl_outl(ctrl_inl(MSTPCR2) & ~MSTPCR2_USB, MSTPCR2);
-}
-
-static inline void usbf_stop_clock(void)
-{
-	ctrl_outl(ctrl_inl(MSTPCR2) | MSTPCR2_USB, MSTPCR2);
-}
-
-#else
-#define usbf_start_clock(x)
-#define usbf_stop_clock(x)
-#endif	/* if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
-
 #endif	/* ifndef __M66592_UDC_H__ */
 
 
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 2376f24f3c8..c21f14e0666 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -114,6 +114,9 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 	int i = 0;
 
 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_HAVE_CLK)
+	clk_enable(r8a66597->clk);
+#endif
 	do {
 		r8a66597_write(r8a66597, SCKE, SYSCFG0);
 		tmp = r8a66597_read(r8a66597, SYSCFG0);
@@ -154,7 +157,11 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
 {
 	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
 	udelay(1);
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_HAVE_CLK)
+	clk_disable(r8a66597->clk);
+#endif
+#else
 	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
 	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
@@ -2261,6 +2268,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
 	iounmap((void *)r8a66597->reg);
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	clk_put(r8a66597->clk);
+#endif
 	usb_put_hcd(hcd);
 	return 0;
 }
@@ -2268,6 +2278,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 #define resource_len(r) (((r)->end - (r)->start) + 1)
 static int __init r8a66597_probe(struct platform_device *pdev)
 {
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	char clk_name[8];
+#endif
 	struct resource *res = NULL, *ires;
 	int irq = -1;
 	void __iomem *reg = NULL;
@@ -2320,6 +2333,16 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	memset(r8a66597, 0, sizeof(struct r8a66597));
 	dev_set_drvdata(&pdev->dev, r8a66597);
 
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+	r8a66597->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(r8a66597->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		ret = PTR_ERR(r8a66597->clk);
+		goto clean_up2;
+	}
+#endif
+
 	spin_lock_init(&r8a66597->lock);
 	init_timer(&r8a66597->rh_timer);
 	r8a66597->rh_timer.function = r8a66597_timer;
@@ -2365,11 +2388,18 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd\n");
-		goto clean_up;
+		goto clean_up3;
 	}
 
 	return 0;
 
+clean_up3:
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	clk_put(r8a66597->clk);
+clean_up2:
+#endif
+	usb_put_hcd(hcd);
+
 clean_up:
 	if (reg)
 		iounmap(reg);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 84ee0141731..ecacde4d69b 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -26,6 +26,10 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#include <linux/clk.h>
+#endif
+
 #define SYSCFG0		0x00
 #define SYSCFG1		0x02
 #define SYSSTS0		0x04
@@ -481,7 +485,9 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	unsigned long reg;
-
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	struct clk *clk;
+#endif
 	struct r8a66597_device		device0;
 	struct r8a66597_root_hub	root_hub[R8A66597_MAX_ROOT_HUB];
 	struct list_head		pipe_queue[R8A66597_MAX_NUM_PIPE];
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3f3ce13fef4..d0c821992a9 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1889,10 +1889,11 @@ config FB_W100
 config FB_SH_MOBILE_LCDC
 	tristate "SuperH Mobile LCDC framebuffer support"
 	depends on FB && SUPERH
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	default m
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
 	---help---
 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
 
@@ -2021,17 +2022,19 @@ config FB_COBALT
 	depends on FB && MIPS_COBALT
 
 config FB_SH7760
-       bool "SH7760/SH7763 LCDC support"
-       depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763)
-       select FB_CFB_FILLRECT
-       select FB_CFB_COPYAREA
-       select FB_CFB_IMAGEBLIT
-       help
-         Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller.
-         Supports display resolutions up to 1024x1024 pixel, grayscale and
-         color operation, with depths ranging from 1 bpp to 8 bpp monochrome
-         and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
-         panels <= 320 pixel horizontal resolution.
+	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
+	depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
+		|| CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Support for the SH7760/SH7763/SH7720/SH7721 integrated
+	  (D)STN/TFT LCD Controller.
+	  Supports display resolutions up to 1024x1024 pixel, grayscale and
+	  color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+	  panels <= 320 pixel horizontal resolution.
 
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 4835bdc4e9f..082026546ae 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -24,6 +24,19 @@
 #include <linux/rmap.h>
 #include <linux/pagemap.h>
 
+struct page *fb_deferred_io_page(struct fb_info *info, unsigned long offs)
+{
+	void *screen_base = (void __force *) info->screen_base;
+	struct page *page;
+
+	if (is_vmalloc_addr(screen_base + offs))
+		page = vmalloc_to_page(screen_base + offs);
+	else
+		page = pfn_to_page((info->fix.smem_start + offs) >> PAGE_SHIFT);
+
+	return page;
+}
+
 /* this is to find and return the vmalloc-ed fb pages */
 static int fb_deferred_io_fault(struct vm_area_struct *vma,
 				struct vm_fault *vmf)
@@ -31,14 +44,12 @@ static int fb_deferred_io_fault(struct vm_area_struct *vma,
 	unsigned long offset;
 	struct page *page;
 	struct fb_info *info = vma->vm_private_data;
-	/* info->screen_base is virtual memory */
-	void *screen_base = (void __force *) info->screen_base;
 
 	offset = vmf->pgoff << PAGE_SHIFT;
 	if (offset >= info->fix.smem_len)
 		return VM_FAULT_SIGBUS;
 
-	page = vmalloc_to_page(screen_base + offset);
+	page = fb_deferred_io_page(info, offset);
 	if (!page)
 		return VM_FAULT_SIGBUS;
 
@@ -60,6 +71,10 @@ int fb_deferred_io_fsync(struct file *file, struct dentry *dentry, int datasync)
 {
 	struct fb_info *info = file->private_data;
 
+	/* Skip if deferred io is complied-in but disabled on this fbdev */
+	if (!info->fbdefio)
+		return 0;
+
 	/* Kill off the delayed work */
 	cancel_rearming_delayed_work(&info->deferred_work);
 
@@ -184,7 +199,6 @@ EXPORT_SYMBOL_GPL(fb_deferred_io_open);
 
 void fb_deferred_io_cleanup(struct fb_info *info)
 {
-	void *screen_base = (void __force *) info->screen_base;
 	struct fb_deferred_io *fbdefio = info->fbdefio;
 	struct page *page;
 	int i;
@@ -195,9 +209,12 @@ void fb_deferred_io_cleanup(struct fb_info *info)
 
 	/* clear out the mapping that we setup */
 	for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
-		page = vmalloc_to_page(screen_base + i);
+		page = fb_deferred_io_page(info, i);
 		page->mapping = NULL;
 	}
+
+	info->fbops->fb_mmap = NULL;
+	mutex_destroy(&fbdefio->lock);
 }
 EXPORT_SYMBOL_GPL(fb_deferred_io_cleanup);
 
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
index 8d0212da451..653bdfee305 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/sh7760fb.c
@@ -13,6 +13,8 @@
  *
  * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
  *     for his original source and testing!
+ *
+ * sh7760_setcolreg get from drivers/video/sh_mobile_lcdcfb.c
  */
 
 #include <linux/completion.h>
@@ -53,29 +55,6 @@ static irqreturn_t sh7760fb_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void sh7760fb_wait_vsync(struct fb_info *info)
-{
-	struct sh7760fb_par *par = info->par;
-
-	if (par->pd->novsync)
-		return;
-
-	iowrite16(ioread16(par->base + LDINTR) & ~VINT_CHECK,
-		  par->base + LDINTR);
-
-	if (par->irq < 0) {
-		/* poll for vert. retrace: status bit is sticky */
-		while (!(ioread16(par->base + LDINTR) & VINT_CHECK))
-			cpu_relax();
-	} else {
-		/* a "wait_for_irq_event(par->irq)" would be extremely nice */
-		init_completion(&par->vsync);
-		enable_irq(par->irq);
-		wait_for_completion(&par->vsync);
-		disable_irq_nosync(par->irq);
-	}
-}
-
 /* wait_for_lps - wait until power supply has reached a certain state. */
 static int wait_for_lps(struct sh7760fb_par *par, int val)
 {
@@ -117,55 +96,28 @@ static int sh7760fb_blank(int blank, struct fb_info *info)
 	return wait_for_lps(par, lps);
 }
 
-/* set color registers */
-static int sh7760fb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
+static int sh7760_setcolreg (u_int regno,
+	u_int red, u_int green, u_int blue,
+	u_int transp, struct fb_info *info)
 {
-	struct sh7760fb_par *par = info->par;
-	u32 s = cmap->start;
-	u32 l = cmap->len;
-	u16 *r = cmap->red;
-	u16 *g = cmap->green;
-	u16 *b = cmap->blue;
-	u32 col, tmo;
-	int ret;
+	u32 *palette = info->pseudo_palette;
 
-	ret = 0;
+	if (regno >= 16)
+		return -EINVAL;
 
-	sh7760fb_wait_vsync(info);
+	/* only FB_VISUAL_TRUECOLOR supported */
 
-	/* request palette access */
-	iowrite16(LDPALCR_PALEN, par->base + LDPALCR);
+	red >>= 16 - info->var.red.length;
+	green >>= 16 - info->var.green.length;
+	blue >>= 16 - info->var.blue.length;
+	transp >>= 16 - info->var.transp.length;
 
-	/* poll for access grant */
-	tmo = 100;
-	while (!(ioread16(par->base + LDPALCR) & LDPALCR_PALS) && (--tmo))
-		cpu_relax();
+	palette[regno] = (red << info->var.red.offset) |
+		(green << info->var.green.offset) |
+		(blue << info->var.blue.offset) |
+		(transp << info->var.transp.offset);
 
-	if (!tmo) {
-		ret = 1;
-		dev_dbg(info->dev, "no palette access!\n");
-		goto out;
-	}
-
-	while (l && (s < 256)) {
-		col = ((*r) & 0xff) << 16;
-		col |= ((*g) & 0xff) << 8;
-		col |= ((*b) & 0xff);
-		col &= SH7760FB_PALETTE_MASK;
-		iowrite32(col, par->base + LDPR(s));
-
-		if (s < 16)
-			((u32 *) (info->pseudo_palette))[s] = s;
-
-		s++;
-		l--;
-		r++;
-		g++;
-		b++;
-	}
-out:
-	iowrite16(0, par->base + LDPALCR);
-	return ret;
+	return 0;
 }
 
 static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info,
@@ -406,7 +358,7 @@ static struct fb_ops sh7760fb_ops = {
 	.owner = THIS_MODULE,
 	.fb_blank = sh7760fb_blank,
 	.fb_check_var = sh7760fb_check_var,
-	.fb_setcmap = sh7760fb_setcmap,
+	.fb_setcolreg = sh7760_setcolreg,
 	.fb_set_par = sh7760fb_set_par,
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index efff672fd7b..0e2b8fd24df 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -16,7 +16,9 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
 #include <video/sh_mobile_lcdc.h>
+#include <asm/atomic.h>
 
 #define PALETTE_NR 16
 
@@ -30,11 +32,15 @@ struct sh_mobile_lcdc_chan {
 	u32 pseudo_palette[PALETTE_NR];
 	struct fb_info info;
 	dma_addr_t dma_handle;
+	struct fb_deferred_io defio;
 };
 
 struct sh_mobile_lcdc_priv {
 	void __iomem *base;
+	int irq;
 #ifdef CONFIG_HAVE_CLK
+	atomic_t clk_usecnt;
+	struct clk *dot_clk;
 	struct clk *clk;
 #endif
 	unsigned long lddckr;
@@ -56,7 +62,7 @@ struct sh_mobile_lcdc_priv {
 
 /* per-channel registers */
 enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
-       LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR };
+       LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR };
 
 static unsigned long lcdc_offs_mainlcd[] = {
 	[LDDCKPAT1R] = 0x400,
@@ -66,6 +72,7 @@ static unsigned long lcdc_offs_mainlcd[] = {
 	[LDMT3R] = 0x420,
 	[LDDFR] = 0x424,
 	[LDSM1R] = 0x428,
+	[LDSM2R] = 0x42c,
 	[LDSA1R] = 0x430,
 	[LDMLSR] = 0x438,
 	[LDHCNR] = 0x448,
@@ -83,6 +90,7 @@ static unsigned long lcdc_offs_sublcd[] = {
 	[LDMT3R] = 0x608,
 	[LDDFR] = 0x60c,
 	[LDSM1R] = 0x610,
+	[LDSM2R] = 0x614,
 	[LDSA1R] = 0x618,
 	[LDMLSR] = 0x620,
 	[LDHCNR] = 0x624,
@@ -96,6 +104,8 @@ static unsigned long lcdc_offs_sublcd[] = {
 #define LCDC_RESET	0x00000100
 #define DISPLAY_BEU	0x00000008
 #define LCDC_ENABLE	0x00000001
+#define LDINTR_FE	0x00000400
+#define LDINTR_FS	0x00000004
 
 static void lcdc_write_chan(struct sh_mobile_lcdc_chan *chan,
 			    int reg_nr, unsigned long data)
@@ -170,6 +180,65 @@ struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = {
 	lcdc_sys_read_data,
 };
 
+#ifdef CONFIG_HAVE_CLK
+static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
+{
+	if (atomic_inc_and_test(&priv->clk_usecnt)) {
+		clk_enable(priv->clk);
+		if (priv->dot_clk)
+			clk_enable(priv->dot_clk);
+	}
+}
+
+static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
+{
+	if (atomic_sub_return(1, &priv->clk_usecnt) == -1) {
+		if (priv->dot_clk)
+			clk_disable(priv->dot_clk);
+		clk_disable(priv->clk);
+	}
+}
+#else
+static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) {}
+static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {}
+#endif
+
+static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
+				       struct list_head *pagelist)
+{
+	struct sh_mobile_lcdc_chan *ch = info->par;
+
+	/* enable clocks before accessing hardware */
+	sh_mobile_lcdc_clk_on(ch->lcdc);
+
+	/* trigger panel update */
+	lcdc_write_chan(ch, LDSM2R, 1);
+}
+
+static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
+{
+	struct fb_deferred_io *fbdefio = info->fbdefio;
+
+	if (fbdefio)
+		schedule_delayed_work(&info->deferred_work, fbdefio->delay);
+}
+
+static irqreturn_t sh_mobile_lcdc_irq(int irq, void *data)
+{
+	struct sh_mobile_lcdc_priv *priv = data;
+	unsigned long tmp;
+
+	/* acknowledge interrupt */
+	tmp = lcdc_read(priv, _LDINTR);
+	tmp &= 0xffffff00; /* mask in high 24 bits */
+	tmp |= 0x000000ff ^ LDINTR_FS; /* status in low 8 */
+	lcdc_write(priv, _LDINTR, tmp);
+
+	/* disable clocks */
+	sh_mobile_lcdc_clk_off(priv);
+	return IRQ_HANDLED;
+}
+
 static void sh_mobile_lcdc_start_stop(struct sh_mobile_lcdc_priv *priv,
 				      int start)
 {
@@ -207,6 +276,11 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	int k, m;
 	int ret = 0;
 
+	/* enable clocks before accessing the hardware */
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
+		if (priv->ch[k].enabled)
+			sh_mobile_lcdc_clk_on(priv);
+
 	/* reset */
 	lcdc_write(priv, _LDCNT2R, lcdc_read(priv, _LDCNT2R) | LCDC_RESET);
 	lcdc_wait_bit(priv, _LDCNT2R, LCDC_RESET, 0);
@@ -249,7 +323,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	lcdc_write(priv, _LDDCKSTPR, 0);
 	lcdc_wait_bit(priv, _LDDCKSTPR, ~0, 0);
 
-	/* interrupts are disabled */
+	/* interrupts are disabled to begin with */
 	lcdc_write(priv, _LDINTR, 0);
 
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
@@ -310,9 +384,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 			return ret;
 	}
 
-	/* --- display_lcdc_data() --- */
-	lcdc_write(priv, _LDINTR, 0x00000f00);
-
 	/* word and long word swap */
 	lcdc_write(priv, _LDDDSR, lcdc_read(priv, _LDDDSR) | 6);
 
@@ -334,8 +405,24 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		/* set line size */
 		lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
 
-		/* continuous read mode */
-		lcdc_write_chan(ch, LDSM1R, 0);
+		/* setup deferred io if SYS bus */
+		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
+		if (ch->ldmt1r_value & (1 << 12) && tmp) {
+			ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
+			ch->defio.delay = msecs_to_jiffies(tmp);
+			ch->info.fbdefio = &ch->defio;
+			fb_deferred_io_init(&ch->info);
+
+			/* one-shot mode */
+			lcdc_write_chan(ch, LDSM1R, 1);
+
+			/* enable "Frame End Interrupt Enable" bit */
+			lcdc_write(priv, _LDINTR, LDINTR_FE);
+
+		} else {
+			/* continuous read mode */
+			lcdc_write_chan(ch, LDSM1R, 0);
+		}
 	}
 
 	/* display output */
@@ -359,6 +446,7 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 {
 	struct sh_mobile_lcdc_chan *ch;
 	struct sh_mobile_lcdc_board_cfg	*board_cfg;
+	unsigned long tmp;
 	int k;
 
 	/* tell the board code to disable the panel */
@@ -367,10 +455,22 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 		board_cfg = &ch->cfg.board_cfg;
 		if (board_cfg->display_off)
 			board_cfg->display_off(board_cfg->board_data);
+
+		/* cleanup deferred io if SYS bus */
+		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
+		if (ch->ldmt1r_value & (1 << 12) && tmp) {
+			fb_deferred_io_cleanup(&ch->info);
+			ch->info.fbdefio = NULL;
+		}
 	}
 
 	/* stop the lcdc */
 	sh_mobile_lcdc_start_stop(priv, 0);
+
+	/* stop clocks */
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
+		if (priv->ch[k].enabled)
+			sh_mobile_lcdc_clk_off(priv);
 }
 
 static int sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
@@ -413,9 +513,13 @@ static int sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
 	return -EINVAL;
 }
 
-static int sh_mobile_lcdc_setup_clocks(struct device *dev, int clock_source,
+static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
+				       int clock_source,
 				       struct sh_mobile_lcdc_priv *priv)
 {
+#ifdef CONFIG_HAVE_CLK
+	char clk_name[8];
+#endif
 	char *str;
 	int icksel;
 
@@ -430,14 +534,21 @@ static int sh_mobile_lcdc_setup_clocks(struct device *dev, int clock_source,
 	priv->lddckr = icksel << 16;
 
 #ifdef CONFIG_HAVE_CLK
+	atomic_set(&priv->clk_usecnt, -1);
+	snprintf(clk_name, sizeof(clk_name), "lcdc%d", pdev->id);
+	priv->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		return PTR_ERR(priv->clk);
+	}
+	
 	if (str) {
-		priv->clk = clk_get(dev, str);
-		if (IS_ERR(priv->clk)) {
-			dev_err(dev, "cannot get clock %s\n", str);
-			return PTR_ERR(priv->clk);
+		priv->dot_clk = clk_get(&pdev->dev, str);
+		if (IS_ERR(priv->dot_clk)) {
+			dev_err(&pdev->dev, "cannot get dot clock %s\n", str);
+			clk_put(priv->clk);
+			return PTR_ERR(priv->dot_clk);
 		}
-
-		clk_enable(priv->clk);
 	}
 #endif
 
@@ -475,11 +586,34 @@ static struct fb_fix_screeninfo sh_mobile_lcdc_fix  = {
 	.accel =	FB_ACCEL_NONE,
 };
 
+static void sh_mobile_lcdc_fillrect(struct fb_info *info,
+				    const struct fb_fillrect *rect)
+{
+	sys_fillrect(info, rect);
+	sh_mobile_lcdc_deferred_io_touch(info);
+}
+
+static void sh_mobile_lcdc_copyarea(struct fb_info *info,
+				    const struct fb_copyarea *area)
+{
+	sys_copyarea(info, area);
+	sh_mobile_lcdc_deferred_io_touch(info);
+}
+
+static void sh_mobile_lcdc_imageblit(struct fb_info *info,
+				     const struct fb_image *image)
+{
+	sys_imageblit(info, image);
+	sh_mobile_lcdc_deferred_io_touch(info);
+}
+
 static struct fb_ops sh_mobile_lcdc_ops = {
 	.fb_setcolreg	= sh_mobile_lcdc_setcolreg,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
+	.fb_read        = fb_sys_read,
+	.fb_write       = fb_sys_write,
+	.fb_fillrect	= sh_mobile_lcdc_fillrect,
+	.fb_copyarea	= sh_mobile_lcdc_copyarea,
+	.fb_imageblit	= sh_mobile_lcdc_imageblit,
 };
 
 static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)
@@ -540,8 +674,9 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "cannot find IO resource\n");
+	i = platform_get_irq(pdev, 0);
+	if (!res || i < 0) {
+		dev_err(&pdev->dev, "cannot get platform resources\n");
 		error = -ENOENT;
 		goto err0;
 	}
@@ -553,6 +688,14 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
+	error = request_irq(i, sh_mobile_lcdc_irq, IRQF_DISABLED,
+			    pdev->dev.bus_id, priv);
+	if (error) {
+		dev_err(&pdev->dev, "unable to request irq\n");
+		goto err1;
+	}
+
+	priv->irq = i;
 	platform_set_drvdata(pdev, priv);
 	pdata = pdev->dev.platform_data;
 
@@ -587,8 +730,7 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	error = sh_mobile_lcdc_setup_clocks(&pdev->dev,
-					    pdata->clock_source, priv);
+	error = sh_mobile_lcdc_setup_clocks(pdev, pdata->clock_source, priv);
 	if (error) {
 		dev_err(&pdev->dev, "unable to setup clocks\n");
 		goto err1;
@@ -637,6 +779,7 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info->fix.smem_start = priv->ch[i].dma_handle;
 		info->screen_base = buf;
 		info->device = &pdev->dev;
+		info->par = &priv->ch[i];
 	}
 
 	if (error)
@@ -664,6 +807,10 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 			 (int) priv->ch[i].cfg.lcd_cfg.xres,
 			 (int) priv->ch[i].cfg.lcd_cfg.yres,
 			 priv->ch[i].cfg.bpp);
+
+		/* deferred io mode: disable clock to save power */
+		if (info->fbdefio)
+			sh_mobile_lcdc_clk_off(priv);
 	}
 
 	return 0;
@@ -697,15 +844,16 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	}
 
 #ifdef CONFIG_HAVE_CLK
-	if (priv->clk) {
-		clk_disable(priv->clk);
-		clk_put(priv->clk);
-	}
+	if (priv->dot_clk)
+		clk_put(priv->dot_clk);
+	clk_put(priv->clk);
 #endif
 
 	if (priv->base)
 		iounmap(priv->base);
 
+	if (priv->irq)
+		free_irq(priv->irq, priv);
 	kfree(priv);
 	return 0;
 }