Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  rtnetlink: propagate error from dev_change_flags in do_setlink()
  isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply
  Phonet: refuse to send bigger than MTU packets
  e1000e: fix IPMI traffic
  e1000e: fix warn_on reload after phy_id error
  phy: fix phy address bug
  e100: fix dma error in direction for mapping
  igb: use dev_printk instead of printk
  qla3xxx: Cleanup: Fix link print statements.
  igb: Use device_set_wakeup_enable
  e1000: Use device_set_wakeup_enable
  e1000e: Use device_set_wakeup_enable
  via-velocity: enable perfect filtering for multicast packets
  phy: Add support for Marvell 88E1118 PHY
  mlx4_en: Pause parameters per port
  phylib: fix premature freeing of struct mii_bus
  atl1: Do not enumerate options unsupported by chip
  atl1e: fix broken multicast by removing unnecessary crc inversion
  gianfar: Fix DMA unmap invocations
  net/ucc_geth: Fix oops in uec_get_ethtool_stats()
  ...

24 files changed, 498 insertions, 100 deletions

diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index bb904a0a98b..1bfc55d7a26 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp)
 	/* slarp reply, send own ip/netmask; if values are nonsense remote
 	 * should think we are unable to provide it with an address via SLARP */
 	p += put_u32(p, CISCO_SLARP_REPLY);
-	p += put_u32(p, addr);	// address
-	p += put_u32(p, mask);	// netmask
+	*(__be32 *)p = addr;	// address
+	p += 4;
+	*(__be32 *)p = mask;	// netmask
+	p += 4;
 	p += put_u16(p, 0);	// unused
 
 	isdn_net_write_super(lp, skb);
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c
index 8cbc1b59bd6..4a770062011 100644
--- a/drivers/net/atl1e/atl1e_hw.c
+++ b/drivers/net/atl1e/atl1e_hw.c
@@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw)
  * atl1e_hash_mc_addr
  *  purpose
  *      set hash value for a multicast address
- *      hash calcu processing :
- *          1. calcu 32bit CRC for multicast address
- *          2. reverse crc with MSB to LSB
  */
 u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
 {
@@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
 	int i;
 
 	crc32 = ether_crc_le(6, mc_addr);
-	crc32 = ~crc32;
 	for (i = 0; i < 32; i++)
 		value |= (((crc32 >> i) & 1) << (31 - i));
 
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 246d92b4263..aef403d299e 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev,
 {
 	struct atl1_adapter *adapter = netdev_priv(netdev);
 
-	wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+	wol->supported = WAKE_MAGIC;
 	wol->wolopts = 0;
-	if (adapter->wol & ATLX_WUFC_EX)
-		wol->wolopts |= WAKE_UCAST;
-	if (adapter->wol & ATLX_WUFC_MC)
-		wol->wolopts |= WAKE_MCAST;
-	if (adapter->wol & ATLX_WUFC_BC)
-		wol->wolopts |= WAKE_BCAST;
 	if (adapter->wol & ATLX_WUFC_MAG)
 		wol->wolopts |= WAKE_MAGIC;
 	return;
@@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev,
 {
 	struct atl1_adapter *adapter = netdev_priv(netdev);
 
-	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+	if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+		WAKE_ARP | WAKE_MAGICSECURE))
 		return -EOPNOTSUPP;
 	adapter->wol = 0;
-	if (wol->wolopts & WAKE_UCAST)
-		adapter->wol |= ATLX_WUFC_EX;
-	if (wol->wolopts & WAKE_MCAST)
-		adapter->wol |= ATLX_WUFC_MC;
-	if (wol->wolopts & WAKE_BCAST)
-		adapter->wol |= ATLX_WUFC_BC;
 	if (wol->wolopts & WAKE_MAGIC)
 		adapter->wol |= ATLX_WUFC_MAG;
 	return 0;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 3d69fae781c..e8bfcce6b31 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -166,7 +166,7 @@
 
 #define DRV_NAME		"e100"
 #define DRV_EXT			"-NAPI"
-#define DRV_VERSION		"3.5.23-k4"DRV_EXT
+#define DRV_VERSION		"3.5.23-k6"DRV_EXT
 #define DRV_DESCRIPTION		"Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT		"Copyright(c) 1999-2006 Intel Corporation"
 #define PFX			DRV_NAME ": "
@@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 		struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
 		put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
 		pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
-			sizeof(struct rfd), PCI_DMA_TODEVICE);
+			sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
 	}
 
 	return 0;
@@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
 	/* Need to sync before taking a peek at cb_complete bit */
 	pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
-		sizeof(struct rfd), PCI_DMA_FROMDEVICE);
+		sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
 	rfd_status = le16_to_cpu(rfd->status);
 
 	DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
@@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
 	/* Get data */
 	pci_unmap_single(nic->pdev, rx->dma_addr,
-		RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+		RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
 
 	/* If this buffer has the el bit, but we think the receiver
 	 * is still running, check to see if it really stopped while
@@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
 		new_before_last_rfd->command |= cpu_to_le16(cb_el);
 		pci_dma_sync_single_for_device(nic->pdev,
 			new_before_last_rx->dma_addr, sizeof(struct rfd),
-			PCI_DMA_TODEVICE);
+			PCI_DMA_BIDIRECTIONAL);
 
 		/* Now that we have a new stopping point, we can clear the old
 		 * stopping point.  We must sync twice to get the proper
@@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
 		old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
 		pci_dma_sync_single_for_device(nic->pdev,
 			old_before_last_rx->dma_addr, sizeof(struct rfd),
-			PCI_DMA_TODEVICE);
+			PCI_DMA_BIDIRECTIONAL);
 		old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
 		pci_dma_sync_single_for_device(nic->pdev,
 			old_before_last_rx->dma_addr, sizeof(struct rfd),
-			PCI_DMA_TODEVICE);
+			PCI_DMA_BIDIRECTIONAL);
 	}
 
 	if(restart_required) {
@@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic)
 		for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
 			if(rx->skb) {
 				pci_unmap_single(nic->pdev, rx->dma_addr,
-					RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+					RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
 				dev_kfree_skb(rx->skb);
 			}
 		}
@@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic)
 	before_last->command |= cpu_to_le16(cb_el);
 	before_last->size = 0;
 	pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
-		sizeof(struct rfd), PCI_DMA_TODEVICE);
+		sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
 
 	nic->rx_to_use = nic->rx_to_clean = nic->rxs;
 	nic->ru_running = RU_SUSPENDED;
@@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
 	msleep(10);
 
 	pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
-			RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+			RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
 
 	if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
 	   skb->data, ETH_DATA_LEN))
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6a3893acfe0..c854c96f5ab 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev,
 
 	/* this function will set ->supported = 0 and return 1 if wol is not
 	 * supported by this hardware */
-	if (e1000_wol_exclusion(adapter, wol))
+	if (e1000_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
 		return;
 
 	/* apply any specific unsupported masks here */
@@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
 		return -EOPNOTSUPP;
 
-	if (e1000_wol_exclusion(adapter, wol))
+	if (e1000_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
 		return wol->wolopts ? -EOPNOTSUPP : 0;
 
 	switch (hw->device_id) {
@@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & WAKE_MAGIC)
 		adapter->wol |= E1000_WUFC_MAG;
 
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
 	return 0;
 }
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index fac82152e4c..872799b746f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	/* initialize the wol settings based on the eeprom settings */
 	adapter->wol = adapter->eeprom_wol;
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	/* print bus type/speed/width info */
 	DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index c55de1c027a..c55fd6fdb91 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -299,6 +299,7 @@ struct e1000_adapter {
 	unsigned long led_status;
 
 	unsigned int flags;
+	unsigned int flags2;
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
 };
@@ -306,6 +307,7 @@ struct e1000_adapter {
 struct e1000_info {
 	enum e1000_mac_type	mac;
 	unsigned int		flags;
+	unsigned int            flags2;
 	u32			pba;
 	s32			(*get_variants)(struct e1000_adapter *);
 	struct e1000_mac_operations *mac_ops;
@@ -347,6 +349,9 @@ struct e1000_info {
 #define FLAG_RX_RESTART_NOW               (1 << 30)
 #define FLAG_MSI_TEST_FAILED              (1 << 31)
 
+/* CRC Stripping defines */
+#define FLAG2_CRC_STRIPPING               (1 << 0)
+
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
 #define E1000_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 70c11c811a0..62421ce9631 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev,
 	wol->supported = 0;
 	wol->wolopts = 0;
 
-	if (!(adapter->flags & FLAG_HAS_WOL))
+	if (!(adapter->flags & FLAG_HAS_WOL) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
 		return;
 
 	wol->supported = WAKE_UCAST | WAKE_MCAST |
@@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev,
 	if (wol->wolopts & WAKE_MAGICSECURE)
 		return -EOPNOTSUPP;
 
-	if (!(adapter->flags & FLAG_HAS_WOL))
+	if (!(adapter->flags & FLAG_HAS_WOL) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
 		return wol->wolopts ? -EOPNOTSUPP : 0;
 
 	/* these settings will always override what we currently have */
@@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev,
 	if (wol->wolopts & WAKE_ARP)
 		adapter->wol |= E1000_WUFC_ARP;
 
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
 	return 0;
 }
 
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index abd492b7336..91795f78c3e 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			goto next_desc;
 		}
 
+		/* adjust length to remove Ethernet CRC */
+		if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+			length -= 4;
+
 		total_rx_bytes += length;
 		total_rx_packets++;
 
@@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 			pci_dma_sync_single_for_device(pdev, ps_page->dma,
 				PAGE_SIZE, PCI_DMA_FROMDEVICE);
 
+			/* remove the CRC */
+			if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+				l1 -= 4;
+
 			skb_put(skb, l1);
 			goto copydone;
 		} /* if */
@@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 			skb->truesize += length;
 		}
 
+		/* strip the ethernet crc, problem is we're using pages now so
+		 * this whole operation can get a little cpu intensive
+		 */
+		if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+			pskb_trim(skb, skb->len - 4);
+
 copydone:
 		total_rx_bytes += skb->len;
 		total_rx_packets++;
@@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	else
 		rctl |= E1000_RCTL_LPE;
 
-	/* Enable hardware CRC frame stripping */
-	rctl |= E1000_RCTL_SECRC;
+	/* Some systems expect that the CRC is included in SMBUS traffic. The
+	 * hardware strips the CRC before sending to both SMBUS (BMC) and to
+	 * host memory when this is enabled
+	 */
+	if (adapter->flags2 & FLAG2_CRC_STRIPPING)
+		rctl |= E1000_RCTL_SECRC;
 
 	/* Setup buffer sizes */
 	rctl &= ~E1000_RCTL_SZ_4096;
@@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->ei = ei;
 	adapter->pba = ei->pba;
 	adapter->flags = ei->flags;
+	adapter->flags2 = ei->flags2;
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
@@ -4970,6 +4989,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	/* initialize the wol settings based on the eeprom settings */
 	adapter->wol = adapter->eeprom_wol;
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	/* reset the hardware with the new settings */
 	e1000e_reset(adapter);
@@ -5008,6 +5028,7 @@ err_hw_init:
 err_sw_init:
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
+	e1000e_reset_interrupt_capability(adapter);
 err_flashmap:
 	iounmap(adapter->hw.hw_addr);
 err_ioremap:
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 77a3d7207a5..e909f96698e 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
  */
 E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
 
+/*
+ * Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
+                          "the CRC");
+
 struct e1000_option {
 	enum { enable_option, range_option, list_option } type;
 	const char *name;
@@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 				adapter->flags |= FLAG_SMART_POWER_DOWN;
 		}
 	}
+	{ /* CRC Stripping */
+		const struct e1000_option opt = {
+			.type = enable_option,
+			.name = "CRC Stripping",
+			.err  = "defaulting to enabled",
+			.def  = OPTION_ENABLED
+		};
+
+		if (num_CrcStripping > bd) {
+			unsigned int crc_stripping = CrcStripping[bd];
+			e1000_validate_option(&crc_stripping, &opt, adapter);
+			if (crc_stripping == OPTION_ENABLED)
+				adapter->flags2 |= FLAG2_CRC_STRIPPING;
+		}
+	}
 	{ /* Kumeran Lock Loss Workaround */
 		const struct e1000_option opt = {
 			.type = enable_option,
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 83a5cb6aa23..c4af949bf86 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev)
 		if (bdp->status & TXBD_DEF)
 			dev->stats.collisions++;
 
+		/* Unmap the DMA memory */
+		dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+				bdp->length, DMA_TO_DEVICE);
+
 		/* Free the sk buffer associated with this TxBD */
 		dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
 
@@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 
 		skb = priv->rx_skbuff[priv->skb_currx];
 
+		dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+				priv->rx_buffer_size, DMA_FROM_DEVICE);
+
 		/* We drop the frame if we failed to allocate a new buffer */
 		if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
 				 bdp->status & RXBD_ERR)) {
@@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 			if (unlikely(!newskb))
 				newskb = skb;
 
-			if (skb) {
-				dma_unmap_single(&priv->dev->dev,
-						bdp->bufPtr,
-						priv->rx_buffer_size,
-						DMA_FROM_DEVICE);
-
+			if (skb)
 				dev_kfree_skb_any(skb);
-			}
 		} else {
 			/* Increment the number of packets */
 			dev->stats.rx_packets++;
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 58906c984be..89964fa739a 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 
 	/* this function will set ->supported = 0 and return 1 if wol is not
 	 * supported by this hardware */
-	if (igb_wol_exclusion(adapter, wol))
+	if (igb_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
 		return;
 
 	/* apply any specific unsupported masks here */
@@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
 		return -EOPNOTSUPP;
 
-	if (igb_wol_exclusion(adapter, wol))
+	if (igb_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
 		return wol->wolopts ? -EOPNOTSUPP : 0;
 
 	switch (hw->device_id) {
@@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & WAKE_MAGIC)
 		adapter->wol |= E1000_WUFC_MAG;
 
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
 	return 0;
 }
 
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 1f397cd9941..1cbae85b142 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 			state &= ~PCIE_LINK_STATE_L0S;
 			pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
 			                      state);
-			printk(KERN_INFO "Disabling ASPM L0s upstream switch "
-			       "port %x:%x.%x\n", us_dev->bus->number,
-			       PCI_SLOT(us_dev->devfn),
-			       PCI_FUNC(us_dev->devfn));
+			dev_info(&pdev->dev,
+				 "Disabling ASPM L0s upstream switch port %s\n",
+				 pci_name(us_dev));
 		}
 	default:
 		break;
@@ -1244,6 +1243,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 
 	/* initialize the wol settings based on the eeprom settings */
 	adapter->wol = adapter->eeprom_wol;
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	/* reset the hardware with the new settings */
 	igb_reset(adapter);
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index a3f732418c4..96e709d6440 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev)
 	/* Configure port */
 	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
 				    priv->rx_skb_size + ETH_FCS_LEN,
-				    mdev->profile.tx_pause,
-				    mdev->profile.tx_ppp,
-				    mdev->profile.rx_pause,
-				    mdev->profile.rx_ppp);
+				    priv->prof->tx_pause,
+				    priv->prof->tx_ppp,
+				    priv->prof->rx_pause,
+				    priv->prof->rx_ppp);
 	if (err) {
 		mlx4_err(mdev, "Failed setting port general configurations"
 			       " for port %d, with error %d\n", priv->port, err);
diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c
index c2e69b1bcd0..95706ee1c01 100644
--- a/drivers/net/mlx4/en_params.c
+++ b/drivers/net/mlx4/en_params.c
@@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2");
 int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
 {
 	struct mlx4_en_profile *params = &mdev->profile;
+	int i;
 
 	params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF);
 	params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF);
@@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
 	params->rss_xor = (rss_xor != 0);
 	params->rss_mask = rss_mask & 0x1f;
 	params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
-	params->rx_pause = pprx;
-	params->rx_ppp = pfcrx;
-	params->tx_pause = pptx;
-	params->tx_ppp = pfctx;
-	if (params->rx_ppp || params->tx_ppp) {
+	for (i = 1; i <= MLX4_MAX_PORTS; i++) {
+		params->prof[i].rx_pause = pprx;
+		params->prof[i].rx_ppp = pfcrx;
+		params->prof[i].tx_pause = pptx;
+		params->prof[i].tx_ppp = pfctx;
+	}
+	if (pfcrx || pfctx) {
 		params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM;
 		params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM;
 	} else {
@@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
 	struct mlx4_en_dev *mdev = priv->mdev;
 	int err;
 
-	mdev->profile.tx_pause = pause->tx_pause != 0;
-	mdev->profile.rx_pause = pause->rx_pause != 0;
+	priv->prof->tx_pause = pause->tx_pause != 0;
+	priv->prof->rx_pause = pause->rx_pause != 0;
 	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
 				    priv->rx_skb_size + ETH_FCS_LEN,
-				    mdev->profile.tx_pause,
-				    mdev->profile.tx_ppp,
-				    mdev->profile.rx_pause,
-				    mdev->profile.rx_ppp);
+				    priv->prof->tx_pause,
+				    priv->prof->tx_ppp,
+				    priv->prof->rx_pause,
+				    priv->prof->rx_ppp);
 	if (err)
 		mlx4_err(mdev, "Failed setting pause params to\n");
 
@@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev,
 				 struct ethtool_pauseparam *pause)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
 
-	pause->tx_pause = mdev->profile.tx_pause;
-	pause->rx_pause = mdev->profile.rx_pause;
+	pause->tx_pause = priv->prof->tx_pause;
+	pause->rx_pause = priv->prof->rx_pause;
 }
 
 static void mlx4_en_get_ringparam(struct net_device *dev,
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 11fb17c6e97..98ddc0811f9 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -322,6 +322,10 @@ struct mlx4_en_port_profile {
 	u32 rx_ring_num;
 	u32 tx_ring_size;
 	u32 rx_ring_size;
+	u8 rx_pause;
+	u8 rx_ppp;
+	u8 tx_pause;
+	u8 tx_ppp;
 };
 
 struct mlx4_en_profile {
@@ -333,10 +337,6 @@ struct mlx4_en_profile {
 	int rx_moder_cnt;
 	int rx_moder_time;
 	int auto_moder;
-	u8 rx_pause;
-	u8 rx_ppp;
-	u8 tx_pause;
-	u8 tx_ppp;
 	u8 no_reset;
 	struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1];
 };
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index d8463b1c3df..1b6f548c441 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -33,8 +33,8 @@
 
 #define DRV_MODULE_NAME		"niu"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"0.9"
-#define DRV_MODULE_RELDATE	"May 4, 2008"
+#define DRV_MODULE_VERSION	"1.0"
+#define DRV_MODULE_RELDATE	"Nov 14, 2008"
 
 static char version[] __devinitdata =
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val)
 }
 
 /* Mode is always 10G fiber.  */
-static int serdes_init_niu(struct niu *np)
+static int serdes_init_niu_10g_fiber(struct niu *np)
 {
 	struct niu_link_config *lp = &np->link_config;
 	u32 tx_cfg, rx_cfg;
@@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np)
 	return 0;
 }
 
+static int serdes_init_niu_1g_serdes(struct niu *np)
+{
+	struct niu_link_config *lp = &np->link_config;
+	u16 pll_cfg, pll_sts;
+	int max_retry = 100;
+	u64 sig, mask, val;
+	u32 tx_cfg, rx_cfg;
+	unsigned long i;
+	int err;
+
+	tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV |
+		  PLL_TX_CFG_RATE_HALF);
+	rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+		  PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+		  PLL_RX_CFG_RATE_HALF);
+
+	if (np->port == 0)
+		rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE;
+
+	if (lp->loopback_mode == LOOPBACK_PHY) {
+		u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+		mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+			   ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+		tx_cfg |= PLL_TX_CFG_ENTEST;
+		rx_cfg |= PLL_RX_CFG_ENTEST;
+	}
+
+	/* Initialize PLL for 1G */
+	pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X);
+
+	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+			 ESR2_TI_PLL_CFG_L, pll_cfg);
+	if (err) {
+		dev_err(np->device, PFX "NIU Port %d "
+			"serdes_init_niu_1g_serdes: "
+			"mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+		return err;
+	}
+
+	pll_sts = PLL_CFG_ENPLL;
+
+	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+			 ESR2_TI_PLL_STS_L, pll_sts);
+	if (err) {
+		dev_err(np->device, PFX "NIU Port %d "
+			"serdes_init_niu_1g_serdes: "
+			"mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+		return err;
+	}
+
+	udelay(200);
+
+	/* Initialize all 4 lanes of the SERDES.  */
+	for (i = 0; i < 4; i++) {
+		err = esr2_set_tx_cfg(np, i, tx_cfg);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < 4; i++) {
+		err = esr2_set_rx_cfg(np, i, rx_cfg);
+		if (err)
+			return err;
+	}
+
+	switch (np->port) {
+	case 0:
+		val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0);
+		mask = val;
+		break;
+
+	case 1:
+		val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1);
+		mask = val;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (max_retry--) {
+		sig = nr64(ESR_INT_SIGNALS);
+		if ((sig & mask) == val)
+			break;
+
+		mdelay(500);
+	}
+
+	if ((sig & mask) != val) {
+		dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
+			"[%08x]\n", np->port, (int) (sig & mask), (int) val);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int serdes_init_niu_10g_serdes(struct niu *np)
+{
+	struct niu_link_config *lp = &np->link_config;
+	u32 tx_cfg, rx_cfg, pll_cfg, pll_sts;
+	int max_retry = 100;
+	u64 sig, mask, val;
+	unsigned long i;
+	int err;
+
+	tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV);
+	rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+		  PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+		  PLL_RX_CFG_EQ_LP_ADAPTIVE);
+
+	if (lp->loopback_mode == LOOPBACK_PHY) {
+		u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+		mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+			   ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+		tx_cfg |= PLL_TX_CFG_ENTEST;
+		rx_cfg |= PLL_RX_CFG_ENTEST;
+	}
+
+	/* Initialize PLL for 10G */
+	pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X);
+
+	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+			 ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff);
+	if (err) {
+		dev_err(np->device, PFX "NIU Port %d "
+			"serdes_init_niu_10g_serdes: "
+			"mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+		return err;
+	}
+
+	pll_sts = PLL_CFG_ENPLL;
+
+	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+			 ESR2_TI_PLL_STS_L, pll_sts & 0xffff);
+	if (err) {
+		dev_err(np->device, PFX "NIU Port %d "
+			"serdes_init_niu_10g_serdes: "
+			"mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+		return err;
+	}
+
+	udelay(200);
+
+	/* Initialize all 4 lanes of the SERDES.  */
+	for (i = 0; i < 4; i++) {
+		err = esr2_set_tx_cfg(np, i, tx_cfg);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < 4; i++) {
+		err = esr2_set_rx_cfg(np, i, rx_cfg);
+		if (err)
+			return err;
+	}
+
+	/* check if serdes is ready */
+
+	switch (np->port) {
+	case 0:
+		mask = ESR_INT_SIGNALS_P0_BITS;
+		val = (ESR_INT_SRDY0_P0 |
+		       ESR_INT_DET0_P0 |
+		       ESR_INT_XSRDY_P0 |
+		       ESR_INT_XDP_P0_CH3 |
+		       ESR_INT_XDP_P0_CH2 |
+		       ESR_INT_XDP_P0_CH1 |
+		       ESR_INT_XDP_P0_CH0);
+		break;
+
+	case 1:
+		mask = ESR_INT_SIGNALS_P1_BITS;
+		val = (ESR_INT_SRDY0_P1 |
+		       ESR_INT_DET0_P1 |
+		       ESR_INT_XSRDY_P1 |
+		       ESR_INT_XDP_P1_CH3 |
+		       ESR_INT_XDP_P1_CH2 |
+		       ESR_INT_XDP_P1_CH1 |
+		       ESR_INT_XDP_P1_CH0);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (max_retry--) {
+		sig = nr64(ESR_INT_SIGNALS);
+		if ((sig & mask) == val)
+			break;
+
+		mdelay(500);
+	}
+
+	if ((sig & mask) != val) {
+		pr_info(PFX "NIU Port %u signal bits [%08x] are not "
+			"[%08x] for 10G...trying 1G\n",
+			np->port, (int) (sig & mask), (int) val);
+
+		/* 10G failed, try initializing at 1G */
+		err = serdes_init_niu_1g_serdes(np);
+		if (!err) {
+			np->flags &= ~NIU_FLAGS_10G;
+			np->mac_xcvr = MAC_XCVR_PCS;
+		}  else {
+			dev_err(np->device, PFX "Port %u 10G/1G SERDES "
+				"Link Failed \n", np->port);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
 static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val)
 {
 	int err;
@@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = {
 	.link_status		= link_status_10g_serdes,
 };
 
+static const struct niu_phy_ops phy_ops_10g_serdes_niu = {
+	.serdes_init		= serdes_init_niu_10g_serdes,
+	.link_status		= link_status_10g_serdes,
+};
+
+static const struct niu_phy_ops phy_ops_1g_serdes_niu = {
+	.serdes_init		= serdes_init_niu_1g_serdes,
+	.link_status		= link_status_1g_serdes,
+};
+
 static const struct niu_phy_ops phy_ops_1g_rgmii = {
 	.xcvr_init		= xcvr_init_1g_rgmii,
 	.link_status		= link_status_1g_rgmii,
 };
 
 static const struct niu_phy_ops phy_ops_10g_fiber_niu = {
-	.serdes_init		= serdes_init_niu,
+	.serdes_init		= serdes_init_niu_10g_fiber,
 	.xcvr_init		= xcvr_init_10g,
 	.link_status		= link_status_10g,
 };
@@ -1998,11 +2225,21 @@ struct niu_phy_template {
 	u32				phy_addr_base;
 };
 
-static const struct niu_phy_template phy_template_niu = {
+static const struct niu_phy_template phy_template_niu_10g_fiber = {
 	.ops		= &phy_ops_10g_fiber_niu,
 	.phy_addr_base	= 16,
 };
 
+static const struct niu_phy_template phy_template_niu_10g_serdes = {
+	.ops		= &phy_ops_10g_serdes_niu,
+	.phy_addr_base	= 0,
+};
+
+static const struct niu_phy_template phy_template_niu_1g_serdes = {
+	.ops		= &phy_ops_1g_serdes_niu,
+	.phy_addr_base	= 0,
+};
+
 static const struct niu_phy_template phy_template_10g_fiber = {
 	.ops		= &phy_ops_10g_fiber,
 	.phy_addr_base	= 8,
@@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np)
 	u32 phy_addr_off = 0;
 
 	if (plat_type == PLAT_TYPE_NIU) {
-		tp = &phy_template_niu;
-		phy_addr_off += np->port;
+		switch (np->flags &
+			(NIU_FLAGS_10G |
+			 NIU_FLAGS_FIBER |
+			 NIU_FLAGS_XCVR_SERDES)) {
+		case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+			/* 10G Serdes */
+			tp = &phy_template_niu_10g_serdes;
+			break;
+		case NIU_FLAGS_XCVR_SERDES:
+			/* 1G Serdes */
+			tp = &phy_template_niu_1g_serdes;
+			break;
+		case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
+			/* 10G Fiber */
+		default:
+			tp = &phy_template_niu_10g_fiber;
+			phy_addr_off += np->port;
+			break;
+		}
 	} else {
 		switch (np->flags &
 			(NIU_FLAGS_10G |
@@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np,
 		np->flags |= NIU_FLAGS_10G;
 		np->flags &= ~NIU_FLAGS_FIBER;
 		np->mac_xcvr = MAC_XCVR_XPCS;
+	} else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) {
+		/* 10G Serdes or 1G Serdes, default to 10G */
+		np->flags |= NIU_FLAGS_10G;
+		np->flags &= ~NIU_FLAGS_FIBER;
+		np->flags |= NIU_FLAGS_XCVR_SERDES;
+		np->mac_xcvr = MAC_XCVR_XPCS;
 	} else {
 		return -EINVAL;
 	}
@@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
 	u32 val;
 	int err;
 
+	num_10g = num_1g = 0;
+
 	if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
 	    !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
 		num_10g = 0;
@@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
 		parent->num_ports = 2;
 		val = (phy_encode(PORT_TYPE_10G, 0) |
 		       phy_encode(PORT_TYPE_10G, 1));
+	} else if ((np->flags & NIU_FLAGS_XCVR_SERDES) &&
+		   (parent->plat_type == PLAT_TYPE_NIU)) {
+		/* this is the Monza case */
+		if (np->flags & NIU_FLAGS_10G) {
+			val = (phy_encode(PORT_TYPE_10G, 0) |
+			       phy_encode(PORT_TYPE_10G, 1));
+		} else {
+			val = (phy_encode(PORT_TYPE_1G, 0) |
+			       phy_encode(PORT_TYPE_1G, 1));
+		}
 	} else {
 		err = fill_phy_probe_info(np, parent, info);
 		if (err)
@@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np)
 				dev->name,
 				(np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
 				(np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
-				(np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
+				(np->flags & NIU_FLAGS_FIBER ? "FIBER" :
+				 (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" :
+				  "COPPER")),
 				(np->mac_xcvr == MAC_XCVR_MII ? "MII" :
 				 (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
 				np->vpd.phy_type);
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index c6fa883daa2..180ca8ae93d 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -1048,6 +1048,13 @@
 #define  PLL_CFG_LD_SHIFT		8
 #define  PLL_CFG_MPY			0x0000001e
 #define  PLL_CFG_MPY_SHIFT		1
+#define  PLL_CFG_MPY_4X		0x0
+#define  PLL_CFG_MPY_5X		0x00000002
+#define  PLL_CFG_MPY_6X		0x00000004
+#define  PLL_CFG_MPY_8X		0x00000008
+#define  PLL_CFG_MPY_10X		0x0000000a
+#define  PLL_CFG_MPY_12X		0x0000000c
+#define  PLL_CFG_MPY_12P5X		0x0000000e
 #define  PLL_CFG_ENPLL			0x00000001
 
 #define ESR2_TI_PLL_STS_L		(ESR2_BASE + 0x002)
@@ -1093,6 +1100,9 @@
 #define  PLL_TX_CFG_INVPAIR		0x00000080
 #define  PLL_TX_CFG_RATE		0x00000060
 #define  PLL_TX_CFG_RATE_SHIFT		5
+#define  PLL_TX_CFG_RATE_FULL		0x0
+#define  PLL_TX_CFG_RATE_HALF		0x20
+#define  PLL_TX_CFG_RATE_QUAD		0x40
 #define  PLL_TX_CFG_BUSWIDTH		0x0000001c
 #define  PLL_TX_CFG_BUSWIDTH_SHIFT	2
 #define  PLL_TX_CFG_ENTEST		0x00000002
@@ -1132,6 +1142,9 @@
 #define  PLL_RX_CFG_INVPAIR		0x00000080
 #define  PLL_RX_CFG_RATE		0x00000060
 #define  PLL_RX_CFG_RATE_SHIFT		5
+#define  PLL_RX_CFG_RATE_FULL		0x0
+#define  PLL_RX_CFG_RATE_HALF		0x20
+#define  PLL_RX_CFG_RATE_QUAD		0x40
 #define  PLL_RX_CFG_BUSWIDTH		0x0000001c
 #define  PLL_RX_CFG_BUSWIDTH_SHIFT	2
 #define  PLL_RX_CFG_ENTEST		0x00000002
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4aa54794704..eb6411c4694 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int m88e1118_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_M1011_PHY_SCR,
+			MII_M1011_PHY_SCR_AUTO_CROSS);
+	if (err < 0)
+		return err;
+
+	err = genphy_config_aneg(phydev);
+	return 0;
+}
+
+static int m88e1118_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Change address */
+	err = phy_write(phydev, 0x16, 0x0002);
+	if (err < 0)
+		return err;
+
+	/* Enable 1000 Mbit */
+	err = phy_write(phydev, 0x15, 0x1070);
+	if (err < 0)
+		return err;
+
+	/* Change address */
+	err = phy_write(phydev, 0x16, 0x0003);
+	if (err < 0)
+		return err;
+
+	/* Adjust LED Control */
+	err = phy_write(phydev, 0x10, 0x021e);
+	if (err < 0)
+		return err;
+
+	/* Reset address */
+	err = phy_write(phydev, 0x16, 0x0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
 static int m88e1145_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -416,6 +469,19 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
+		.phy_id = 0x01410e10,
+		.phy_id_mask = 0xfffffff0,
+		.name = "Marvell 88E1118",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1118_config_init,
+		.config_aneg = &m88e1118_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = {.owner = THIS_MODULE,},
+	},
+	{
 		.phy_id = 0x01410cd0,
 		.phy_id_mask = 0xfffffff0,
 		.name = "Marvell 88E1145",
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index d0ed1ef284a..536bda1f428 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus)
 	BUG_ON(bus->state != MDIOBUS_REGISTERED);
 	bus->state = MDIOBUS_UNREGISTERED;
 
-	device_unregister(&bus->dev);
+	device_del(&bus->dev);
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
 		if (bus->phy_map[i])
 			device_unregister(&bus->phy_map[i]->dev);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e11b03b2b25..8fb1faca883 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
 	if (r)
 		return ERR_PTR(r);
 
-	/* If the phy_id is all Fs, there is no device there */
-	if (0xffffffff == phy_id)
+	/* If the phy_id is all Fs or all 0s, there is no device there */
+	if ((0xffff == phy_id) || (0x00 == phy_id))
 		return NULL;
 
 	dev = phy_device_create(bus, addr, phy_id);
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 3cdd07c45b6..508452c0215 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev)
 		linkState = LS_UP;
 	} else {
 		linkState = LS_DOWN;
-		if (netif_msg_link(qdev))
-			printk(KERN_WARNING PFX
-			       "%s: Link is down.\n", qdev->ndev->name);
 	}
 	return linkState;
 }
@@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev)
 			ql_mac_enable(qdev, 1);
 		}
 
-		if (netif_msg_link(qdev))
-			printk(KERN_DEBUG PFX
-			       "%s: Change port_link_state LS_DOWN to LS_UP.\n",
-			       qdev->ndev->name);
 		qdev->port_link_state = LS_UP;
 		netif_start_queue(qdev->ndev);
 		netif_carrier_on(qdev->ndev);
@@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work)
 		/* Fall Through */
 
 	case LS_DOWN:
-		if (netif_msg_link(qdev))
-			printk(KERN_DEBUG PFX
-			       "%s: port_link_state = LS_DOWN.\n",
-			       qdev->ndev->name);
 		if (curr_link_state == LS_UP) {
 			if (netif_msg_link(qdev))
-				printk(KERN_DEBUG PFX
-				       "%s: curr_link_state = LS_UP.\n",
+				printk(KERN_INFO PFX "%s: Link is up.\n",
 				       qdev->ndev->name);
 			if (ql_is_auto_neg_complete(qdev))
 				ql_finish_auto_neg(qdev);
@@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work)
 			if (qdev->port_link_state == LS_UP)
 				ql_link_down_detect_clear(qdev);
 
+			qdev->port_link_state = LS_UP;
 		}
 		break;
 
@@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work)
 		 * See if the link is currently down or went down and came
 		 * back up
 		 */
-		if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) {
+		if (curr_link_state == LS_DOWN) {
 			if (netif_msg_link(qdev))
 				printk(KERN_INFO PFX "%s: Link is down.\n",
 				       qdev->ndev->name);
 			qdev->port_link_state = LS_DOWN;
 		}
+		if (ql_link_down_detect(qdev))
+			qdev->port_link_state = LS_DOWN;
 		break;
 	}
 	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 85f38a6b6a4..68a7f541413 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev,
 	if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) {
 		base = (u32 __iomem *)&ugeth->ug_regs->tx64;
 		for (i = 0; i < UEC_HW_STATS_LEN; i++)
-			data[j++] = (u64)in_be32(&base[i]);
+			data[j++] = in_be32(&base[i]);
 	}
 	if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) {
 		base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram;
 		for (i = 0; i < UEC_TX_FW_STATS_LEN; i++)
-			data[j++] = (u64)in_be32(&base[i]);
+			data[j++] = base ? in_be32(&base[i]) : 0;
 	}
 	if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) {
 		base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram;
 		for (i = 0; i < UEC_RX_FW_STATS_LEN; i++)
-			data[j++] = (u64)in_be32(&base[i]);
+			data[j++] = base ? in_be32(&base[i]) : 0;
 	}
 }
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 3590ea5a902..11cb3e504e1 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev)
 		}
 
 		mac_set_cam_mask(regs, vptr->mCAMmask);
-		rx_mode = (RCR_AM | RCR_AB);
+		rx_mode = RCR_AM | RCR_AB | RCR_AP;
 	}
 	if (dev->mtu > 1500)
 		rx_mode |= RCR_AL;