ibm_emac: Remove the ibm_emac driver

The arch/ppc sub-tree has been removed in the powerpc git tree.  The old
ibm_emac driver is no longer used by anything as a result of this.  This
removes it, leaving the ibm_newemac driver as the proper driver to use for
PowerPC boards with the EMAC hardware.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

19 files changed, 0 insertions, 5281 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 20b5367f7e0..0e0f6696cca 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1255,7 +1255,6 @@ config IBMVETH
 	  To compile this driver as a module, choose M here. The module will
 	  be called ibmveth.
 
-source "drivers/net/ibm_emac/Kconfig"
 source "drivers/net/ibm_newemac/Kconfig"
 
 config NET_PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c96fe203680..c9faa460590 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -4,7 +4,6 @@
 
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_E1000E) += e1000e/
-obj-$(CONFIG_IBM_EMAC) += ibm_emac/
 obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
 obj-$(CONFIG_IGB) += igb/
 obj-$(CONFIG_IXGBE) += ixgbe/
diff --git a/drivers/net/ibm_emac/Kconfig b/drivers/net/ibm_emac/Kconfig
deleted file mode 100644
index f61c48047dc..00000000000
--- a/drivers/net/ibm_emac/Kconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-config IBM_EMAC
-	tristate "PowerPC 4xx on-chip Ethernet support"
-	depends on 4xx && !PPC_MERGE
-	help
-	  This driver supports the PowerPC 4xx EMAC family of on-chip
-          Ethernet controllers.
-
-config IBM_EMAC_RXB
-	int "Number of receive buffers"
-	depends on IBM_EMAC
-	default "128"
-
-config IBM_EMAC_TXB
-	int "Number of transmit buffers"
-	depends on IBM_EMAC
-	default "64"
-
-config IBM_EMAC_POLL_WEIGHT
-	int "MAL NAPI polling weight"
-	depends on IBM_EMAC
-	default "32"
-
-config IBM_EMAC_RX_COPY_THRESHOLD
-	int "RX skb copy threshold (bytes)"
-	depends on IBM_EMAC
-	default "256"
-
-config IBM_EMAC_RX_SKB_HEADROOM
-	int "Additional RX skb headroom (bytes)"
-	depends on IBM_EMAC
-	default "0"
-	help
-	  Additional receive skb headroom. Note, that driver
-	  will always reserve at least 2 bytes to make IP header
-	  aligned, so usually there is no need to add any additional
-	  headroom.
-
-	  If unsure, set to 0.
-
-config IBM_EMAC_PHY_RX_CLK_FIX
-	bool "PHY Rx clock workaround"
-	depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
-	help
-	  Enable this if EMAC attached to a PHY which doesn't generate
-	  RX clock if there is no link, if this is the case, you will
-	  see "TX disable timeout" or "RX disable timeout" in the system
-	  log.
-
-	  If unsure, say N.
-
-config IBM_EMAC_DEBUG
-	bool "Debugging"
-	depends on IBM_EMAC
-	default n
-
-config IBM_EMAC_ZMII
-	bool
-	depends on IBM_EMAC && (NP405H || NP405L || 44x)
-	default y
-
-config IBM_EMAC_RGMII
-	bool
-	depends on IBM_EMAC && 440GX
-	default y
-
-config IBM_EMAC_TAH
-	bool
-	depends on IBM_EMAC && 440GX
-	default y
-
diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile
deleted file mode 100644
index f98ddf0e807..00000000000
--- a/drivers/net/ibm_emac/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the PowerPC 4xx on-chip ethernet driver
-#
-
-obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
-
-ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o 
-ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
-ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
-ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
-ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
deleted file mode 100644
index 97ed22bb432..00000000000
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac.h
- *
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- *      Matt Porter <mporter@kernel.crashing.org>
- *      Armin Kuster <akuster@mvista.com>
- * 	Copyright 2002-2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_H_
-#define __IBM_EMAC_H_
-
-#include <linux/types.h>
-
-/* This is a simple check to prevent use of this driver on non-tested SoCs */
-#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
-    !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
-    !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \
-    !defined(CONFIG_440GR)
-#error	"Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
-#endif
-
-/* EMAC registers 		Write Access rules */
-struct emac_regs {
-	u32 mr0;		/* special 	*/
-	u32 mr1;		/* Reset 	*/
-	u32 tmr0;		/* special 	*/
-	u32 tmr1;		/* special 	*/
-	u32 rmr;		/* Reset 	*/
-	u32 isr;		/* Always 	*/
-	u32 iser;		/* Reset 	*/
-	u32 iahr;		/* Reset, R, T 	*/
-	u32 ialr;		/* Reset, R, T 	*/
-	u32 vtpid;		/* Reset, R, T 	*/
-	u32 vtci;		/* Reset, R, T 	*/
-	u32 ptr;		/* Reset,    T 	*/
-	u32 iaht1;		/* Reset, R	*/
-	u32 iaht2;		/* Reset, R	*/
-	u32 iaht3;		/* Reset, R	*/
-	u32 iaht4;		/* Reset, R	*/
-	u32 gaht1;		/* Reset, R	*/
-	u32 gaht2;		/* Reset, R	*/
-	u32 gaht3;		/* Reset, R	*/
-	u32 gaht4;		/* Reset, R	*/
-	u32 lsah;
-	u32 lsal;
-	u32 ipgvr;		/* Reset,    T 	*/
-	u32 stacr;		/* special 	*/
-	u32 trtr;		/* special 	*/
-	u32 rwmr;		/* Reset 	*/
-	u32 octx;
-	u32 ocrx;
-	u32 ipcr;
-};
-
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_ETHTOOL_REGS_VER		0
-#define EMAC_ETHTOOL_REGS_SIZE		(sizeof(struct emac_regs) - sizeof(u32))
-#else
-#define EMAC_ETHTOOL_REGS_VER		1
-#define EMAC_ETHTOOL_REGS_SIZE		sizeof(struct emac_regs)
-#endif
-
-/* EMACx_MR0 */
-#define EMAC_MR0_RXI			0x80000000
-#define EMAC_MR0_TXI			0x40000000
-#define EMAC_MR0_SRST			0x20000000
-#define EMAC_MR0_TXE			0x10000000
-#define EMAC_MR0_RXE			0x08000000
-#define EMAC_MR0_WKE			0x04000000
-
-/* EMACx_MR1 */
-#define EMAC_MR1_FDE			0x80000000
-#define EMAC_MR1_ILE			0x40000000
-#define EMAC_MR1_VLE			0x20000000
-#define EMAC_MR1_EIFC			0x10000000
-#define EMAC_MR1_APP			0x08000000
-#define EMAC_MR1_IST			0x01000000
-
-#define EMAC_MR1_MF_MASK		0x00c00000
-#define EMAC_MR1_MF_10			0x00000000
-#define EMAC_MR1_MF_100			0x00400000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_MR1_MF_1000		0x00000000
-#define EMAC_MR1_MF_1000GPCS		0x00000000
-#define EMAC_MR1_MF_IPPA(id)		0x00000000
-#else
-#define EMAC_MR1_MF_1000		0x00800000
-#define EMAC_MR1_MF_1000GPCS		0x00c00000
-#define EMAC_MR1_MF_IPPA(id)		(((id) & 0x1f) << 6)
-#endif
-
-#define EMAC_TX_FIFO_SIZE		2048
-
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_MR1_RFS_4K			0x00300000
-#define EMAC_MR1_RFS_16K		0x00000000
-#define EMAC_RX_FIFO_SIZE(gige)		4096
-#define EMAC_MR1_TFS_2K			0x00080000
-#define EMAC_MR1_TR0_MULT		0x00008000
-#define EMAC_MR1_JPSM			0x00000000
-#define EMAC_MR1_MWSW_001		0x00000000
-#define EMAC_MR1_BASE(opb)		(EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
-#else
-#define EMAC_MR1_RFS_4K			0x00180000
-#define EMAC_MR1_RFS_16K		0x00280000
-#define EMAC_RX_FIFO_SIZE(gige)		((gige) ? 16384 : 4096)
-#define EMAC_MR1_TFS_2K			0x00020000
-#define EMAC_MR1_TR			0x00008000
-#define EMAC_MR1_MWSW_001		0x00001000
-#define EMAC_MR1_JPSM			0x00000800
-#define EMAC_MR1_OBCI_MASK		0x00000038
-#define EMAC_MR1_OBCI_50		0x00000000
-#define EMAC_MR1_OBCI_66		0x00000008
-#define EMAC_MR1_OBCI_83		0x00000010
-#define EMAC_MR1_OBCI_100		0x00000018
-#define EMAC_MR1_OBCI_100P		0x00000020
-#define EMAC_MR1_OBCI(freq)		((freq) <= 50  ? EMAC_MR1_OBCI_50 : \
-					 (freq) <= 66  ? EMAC_MR1_OBCI_66 : \
-					 (freq) <= 83  ? EMAC_MR1_OBCI_83 : \
-					 (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P)
-#define EMAC_MR1_BASE(opb)		(EMAC_MR1_TFS_2K | EMAC_MR1_TR | \
-					 EMAC_MR1_OBCI(opb))
-#endif
-
-/* EMACx_TMR0 */
-#define EMAC_TMR0_GNP			0x80000000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_TMR0_DEFAULT		0x00000000	
-#else
-#define EMAC_TMR0_TFAE_2_32		0x00000001
-#define EMAC_TMR0_TFAE_4_64		0x00000002
-#define EMAC_TMR0_TFAE_8_128		0x00000003
-#define EMAC_TMR0_TFAE_16_256		0x00000004
-#define EMAC_TMR0_TFAE_32_512		0x00000005
-#define EMAC_TMR0_TFAE_64_1024		0x00000006
-#define EMAC_TMR0_TFAE_128_2048		0x00000007
-#define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_2_32
-#endif
-#define EMAC_TMR0_XMIT			(EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
-
-/* EMACx_TMR1 */
-
-/* IBM manuals are not very clear here. 
- * This is my interpretation of how things are. --ebs
- */
-#if defined(CONFIG_40x)
-#define EMAC_FIFO_ENTRY_SIZE		8
-#define EMAC_MAL_BURST_SIZE		(16 * 4)
-#else
-#define EMAC_FIFO_ENTRY_SIZE		16
-#define EMAC_MAL_BURST_SIZE		(64 * 4)
-#endif
-
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_TMR1(l,h)			(((l) << 27) | (((h) & 0xff) << 16))
-#else
-#define EMAC_TMR1(l,h)			(((l) << 27) | (((h) & 0x3ff) << 14))
-#endif
-
-/* EMACx_RMR */
-#define EMAC_RMR_SP			0x80000000
-#define EMAC_RMR_SFCS			0x40000000
-#define EMAC_RMR_RRP			0x20000000
-#define EMAC_RMR_RFP			0x10000000
-#define EMAC_RMR_ROP			0x08000000
-#define EMAC_RMR_RPIR			0x04000000
-#define EMAC_RMR_PPP			0x02000000
-#define EMAC_RMR_PME			0x01000000
-#define EMAC_RMR_PMME			0x00800000
-#define EMAC_RMR_IAE			0x00400000
-#define EMAC_RMR_MIAE			0x00200000
-#define EMAC_RMR_BAE			0x00100000
-#define EMAC_RMR_MAE			0x00080000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_RMR_BASE			0x00000000
-#else
-#define EMAC_RMR_RFAF_2_32		0x00000001
-#define EMAC_RMR_RFAF_4_64		0x00000002
-#define EMAC_RMR_RFAF_8_128		0x00000003
-#define EMAC_RMR_RFAF_16_256		0x00000004
-#define EMAC_RMR_RFAF_32_512		0x00000005
-#define EMAC_RMR_RFAF_64_1024		0x00000006
-#define EMAC_RMR_RFAF_128_2048		0x00000007
-#define EMAC_RMR_BASE			EMAC_RMR_RFAF_128_2048
-#endif
-
-/* EMACx_ISR & EMACx_ISER */
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_ISR_TXPE			0x00000000
-#define EMAC_ISR_RXPE			0x00000000
-#define EMAC_ISR_TXUE			0x00000000
-#define EMAC_ISR_RXOE			0x00000000
-#else
-#define EMAC_ISR_TXPE			0x20000000
-#define EMAC_ISR_RXPE			0x10000000
-#define EMAC_ISR_TXUE			0x08000000
-#define EMAC_ISR_RXOE			0x04000000
-#endif
-#define EMAC_ISR_OVR			0x02000000
-#define EMAC_ISR_PP			0x01000000
-#define EMAC_ISR_BP			0x00800000
-#define EMAC_ISR_RP			0x00400000
-#define EMAC_ISR_SE			0x00200000
-#define EMAC_ISR_ALE			0x00100000
-#define EMAC_ISR_BFCS			0x00080000
-#define EMAC_ISR_PTLE			0x00040000
-#define EMAC_ISR_ORE			0x00020000
-#define EMAC_ISR_IRE			0x00010000
-#define EMAC_ISR_SQE			0x00000080
-#define EMAC_ISR_TE			0x00000040
-#define EMAC_ISR_MOS			0x00000002
-#define EMAC_ISR_MOF			0x00000001
-
-/* EMACx_STACR */
-#define EMAC_STACR_PHYD_MASK		0xffff
-#define EMAC_STACR_PHYD_SHIFT		16
-#define EMAC_STACR_OC			0x00008000
-#define EMAC_STACR_PHYE			0x00004000
-#define EMAC_STACR_STAC_MASK		0x00003000
-#define EMAC_STACR_STAC_READ		0x00001000
-#define EMAC_STACR_STAC_WRITE		0x00002000
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_STACR_OPBC_MASK		0x00000C00
-#define EMAC_STACR_OPBC_50		0x00000000
-#define EMAC_STACR_OPBC_66		0x00000400
-#define EMAC_STACR_OPBC_83		0x00000800
-#define EMAC_STACR_OPBC_100		0x00000C00
-#define EMAC_STACR_OPBC(freq)		((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
-					 (freq) <= 66 ? EMAC_STACR_OPBC_66 : \
-					 (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
-#define EMAC_STACR_BASE(opb)		EMAC_STACR_OPBC(opb)
-#else
-#define EMAC_STACR_BASE(opb)		0x00000000
-#endif
-#define EMAC_STACR_PCDA_MASK		0x1f
-#define EMAC_STACR_PCDA_SHIFT		5
-#define EMAC_STACR_PRA_MASK		0x1f
-
-/*
- * For the 440SPe, AMCC inexplicably changed the polarity of
- * the "operation complete" bit in the MII control register.
- */
-#if defined(CONFIG_440SPE)
-static inline int emac_phy_done(u32 stacr)
-{
-	return !(stacr & EMAC_STACR_OC);
-};
-#define EMAC_STACR_START 		EMAC_STACR_OC
-
-#else /* CONFIG_440SPE */
-static inline int emac_phy_done(u32 stacr)
-{
-	return stacr & EMAC_STACR_OC;
-};
-#define EMAC_STACR_START 		0
-#endif /* !CONFIG_440SPE */
-
-/* EMACx_TRTR */
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_TRTR_SHIFT			27
-#else
-#define EMAC_TRTR_SHIFT			24
-#endif
-#define EMAC_TRTR(size)			((((size) >> 6) - 1) << EMAC_TRTR_SHIFT)
-
-/* EMACx_RWMR */
-#if !defined(CONFIG_IBM_EMAC4)
-#define EMAC_RWMR(l,h)			(((l) << 23) | ( ((h) & 0x1ff) << 7))	
-#else
-#define EMAC_RWMR(l,h)			(((l) << 22) | ( ((h) & 0x3ff) << 6))	
-#endif
-
-/* EMAC specific TX descriptor control fields (write access) */
-#define EMAC_TX_CTRL_GFCS		0x0200
-#define EMAC_TX_CTRL_GP			0x0100
-#define EMAC_TX_CTRL_ISA		0x0080
-#define EMAC_TX_CTRL_RSA		0x0040
-#define EMAC_TX_CTRL_IVT		0x0020
-#define EMAC_TX_CTRL_RVT		0x0010
-#define EMAC_TX_CTRL_TAH_CSUM		0x000e
-
-/* EMAC specific TX descriptor status fields (read access) */
-#define EMAC_TX_ST_BFCS			0x0200
-#define EMAC_TX_ST_LCS			0x0080
-#define EMAC_TX_ST_ED			0x0040
-#define EMAC_TX_ST_EC			0x0020
-#define EMAC_TX_ST_LC			0x0010
-#define EMAC_TX_ST_MC			0x0008
-#define EMAC_TX_ST_SC			0x0004
-#define EMAC_TX_ST_UR			0x0002
-#define EMAC_TX_ST_SQE			0x0001
-#if !defined(CONFIG_IBM_EMAC_TAH)
-#define EMAC_IS_BAD_TX(v)		((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
-					 EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
-					 EMAC_TX_ST_MC | EMAC_TX_ST_UR))
-#else
-#define EMAC_IS_BAD_TX(v)		((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
-					 EMAC_TX_ST_EC | EMAC_TX_ST_LC))
-#endif					 
-
-/* EMAC specific RX descriptor status fields (read access) */
-#define EMAC_RX_ST_OE			0x0200
-#define EMAC_RX_ST_PP			0x0100
-#define EMAC_RX_ST_BP			0x0080
-#define EMAC_RX_ST_RP			0x0040
-#define EMAC_RX_ST_SE			0x0020
-#define EMAC_RX_ST_AE			0x0010
-#define EMAC_RX_ST_BFCS			0x0008
-#define EMAC_RX_ST_PTL			0x0004
-#define EMAC_RX_ST_ORE			0x0002
-#define EMAC_RX_ST_IRE			0x0001
-#define EMAC_RX_TAH_BAD_CSUM		0x0003
-#define EMAC_BAD_RX_MASK		(EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
-					 EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
-					 EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
-					 EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
-					 EMAC_RX_ST_IRE )
-#endif /* __IBM_EMAC_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
deleted file mode 100644
index 73664f226f3..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ /dev/null
@@ -1,2263 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_core.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * 	Matt Porter <mporter@kernel.crashing.org>
- *	(c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *      Armin Kuster <akuster@mvista.com>
- * 	Johnnie Peters <jpeters@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/crc32.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/bitops.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/uaccess.h>
-#include <asm/ocp.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_debug.h"
-
-/*
- * Lack of dma_unmap_???? calls is intentional.
- *
- * API-correct usage requires additional support state information to be 
- * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
- * EMAC design (e.g. TX buffer passed from network stack can be split into
- * several BDs, dma_map_single/dma_map_page can be used to map particular BD),
- * maintaining such information will add additional overhead.
- * Current DMA API implementation for 4xx processors only ensures cache coherency
- * and dma_unmap_???? routines are empty and are likely to stay this way.
- * I decided to omit dma_unmap_??? calls because I don't want to add additional
- * complexity just for the sake of following some abstract API, when it doesn't
- * add any real benefit to the driver. I understand that this decision maybe 
- * controversial, but I really tried to make code API-correct and efficient 
- * at the same time and didn't come up with code I liked :(.                --ebs
- */
-
-#define DRV_NAME        "emac"
-#define DRV_VERSION     "3.54"
-#define DRV_DESC        "PPC 4xx OCP EMAC driver"
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_AUTHOR
-    ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
-MODULE_LICENSE("GPL");
-
-/* minimum number of free TX descriptors required to wake up TX process */
-#define EMAC_TX_WAKEUP_THRESH		(NUM_TX_BUFF / 4)
-
-/* If packet size is less than this number, we allocate small skb and copy packet 
- * contents into it instead of just sending original big skb up
- */
-#define EMAC_RX_COPY_THRESH		CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
-
-/* Since multiple EMACs share MDIO lines in various ways, we need
- * to avoid re-using the same PHY ID in cases where the arch didn't
- * setup precise phy_map entries
- */
-static u32 busy_phy_map;
-
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \
-    (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR))
-/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
- * with PHY RX clock problem.
- * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which
- * also allows controlling each EMAC clock
- */
-static inline void EMAC_RX_CLK_TX(int idx)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-
-#if defined(CONFIG_405EP)
-	mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
-#else /* CONFIG_440EP || CONFIG_440GR */
-	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
-#endif
-
-	local_irq_restore(flags);
-}
-
-static inline void EMAC_RX_CLK_DEFAULT(int idx)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-
-#if defined(CONFIG_405EP)
-	mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx));
-#else /* CONFIG_440EP */
-	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx));
-#endif
-
-	local_irq_restore(flags);
-}
-#else
-#define EMAC_RX_CLK_TX(idx)		((void)0)
-#define EMAC_RX_CLK_DEFAULT(idx)	((void)0)
-#endif
-
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX)
-/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS],
- * unfortunately this is less flexible than 440EP case, because it's a global 
- * setting for all EMACs, therefore we do this clock trick only during probe.
- */
-#define EMAC_CLK_INTERNAL		SDR_WRITE(DCRN_SDR_MFR, \
-					    SDR_READ(DCRN_SDR_MFR) | 0x08000000)
-#define EMAC_CLK_EXTERNAL		SDR_WRITE(DCRN_SDR_MFR, \
-					    SDR_READ(DCRN_SDR_MFR) & ~0x08000000)
-#else
-#define EMAC_CLK_INTERNAL		((void)0)
-#define EMAC_CLK_EXTERNAL		((void)0)
-#endif
-
-/* I don't want to litter system log with timeout errors 
- * when we have brain-damaged PHY.
- */
-static inline void emac_report_timeout_error(struct ocp_enet_private *dev,
-					     const char *error)
-{
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
-	DBG("%d: %s" NL, dev->def->index, error);
-#else
-	if (net_ratelimit())
-		printk(KERN_ERR "emac%d: %s\n", dev->def->index, error);
-#endif
-}
-
-/* PHY polling intervals */
-#define PHY_POLL_LINK_ON	HZ
-#define PHY_POLL_LINK_OFF	(HZ / 5)
-
-/* Graceful stop timeouts in us. 
- * We should allow up to 1 frame time (full-duplex, ignoring collisions) 
- */
-#define STOP_TIMEOUT_10		1230	
-#define STOP_TIMEOUT_100	124
-#define STOP_TIMEOUT_1000	13
-#define STOP_TIMEOUT_1000_JUMBO	73
-
-/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
-static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
-	"rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
-	"tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
-	"rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
-	"rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
-	"rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
-	"rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
-	"rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
-	"rx_bad_packet", "rx_runt_packet", "rx_short_event",
-	"rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
-	"rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
-	"tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
-	"tx_bd_excessive_collisions", "tx_bd_late_collision",
-	"tx_bd_multple_collisions", "tx_bd_single_collision",
-	"tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
-	"tx_errors"
-};
-
-static irqreturn_t emac_irq(int irq, void *dev_instance);
-static void emac_clean_tx_ring(struct ocp_enet_private *dev);
-
-static inline int emac_phy_supports_gige(int phy_mode)
-{
-	return  phy_mode == PHY_MODE_GMII ||
-		phy_mode == PHY_MODE_RGMII ||
-		phy_mode == PHY_MODE_TBI ||
-		phy_mode == PHY_MODE_RTBI;
-}
-
-static inline int emac_phy_gpcs(int phy_mode)
-{
-	return  phy_mode == PHY_MODE_TBI ||
-		phy_mode == PHY_MODE_RTBI;
-}
-
-static inline void emac_tx_enable(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	unsigned long flags;
-	u32 r;
-
-	local_irq_save(flags);
-
-	DBG("%d: tx_enable" NL, dev->def->index);
-
-	r = in_be32(&p->mr0);
-	if (!(r & EMAC_MR0_TXE))
-		out_be32(&p->mr0, r | EMAC_MR0_TXE);
-	local_irq_restore(flags);
-}
-
-static void emac_tx_disable(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	unsigned long flags;
-	u32 r;
-
-	local_irq_save(flags);
-
-	DBG("%d: tx_disable" NL, dev->def->index);
-
-	r = in_be32(&p->mr0);
-	if (r & EMAC_MR0_TXE) {
-		int n = dev->stop_timeout;
-		out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
-		while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) {
-			udelay(1);
-			--n;
-		}	
-		if (unlikely(!n))
-			emac_report_timeout_error(dev, "TX disable timeout");
-	}
-	local_irq_restore(flags);
-}
-
-static void emac_rx_enable(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	unsigned long flags;
-	u32 r;
-
-	local_irq_save(flags);
-	if (unlikely(dev->commac.rx_stopped))
-		goto out;
-
-	DBG("%d: rx_enable" NL, dev->def->index);
-
-	r = in_be32(&p->mr0);
-	if (!(r & EMAC_MR0_RXE)) {
-		if (unlikely(!(r & EMAC_MR0_RXI))) {
-			/* Wait if previous async disable is still in progress */
-			int n = dev->stop_timeout;
-			while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
-				udelay(1);
-				--n;
-			}	
-			if (unlikely(!n))
-				emac_report_timeout_error(dev,
-							  "RX disable timeout");
-		}
-		out_be32(&p->mr0, r | EMAC_MR0_RXE);
-	}
-      out:
-	local_irq_restore(flags);
-}
-
-static void emac_rx_disable(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	unsigned long flags;
-	u32 r;
-
-	local_irq_save(flags);
-
-	DBG("%d: rx_disable" NL, dev->def->index);
-
-	r = in_be32(&p->mr0);
-	if (r & EMAC_MR0_RXE) {
-		int n = dev->stop_timeout;
-		out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
-		while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
-			udelay(1);
-			--n;
-		}	
-		if (unlikely(!n))
-			emac_report_timeout_error(dev, "RX disable timeout");
-	}
-	local_irq_restore(flags);
-}
-
-static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	unsigned long flags;
-	u32 r;
-
-	local_irq_save(flags);
-
-	DBG("%d: rx_disable_async" NL, dev->def->index);
-
-	r = in_be32(&p->mr0);
-	if (r & EMAC_MR0_RXE)
-		out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
-	local_irq_restore(flags);
-}
-
-static int emac_reset(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	unsigned long flags;
-	int n = 20;
-
-	DBG("%d: reset" NL, dev->def->index);
-
-	local_irq_save(flags);
-
-	if (!dev->reset_failed) {
-		/* 40x erratum suggests stopping RX channel before reset,
-		 * we stop TX as well
-		 */
-		emac_rx_disable(dev);
-		emac_tx_disable(dev);
-	}
-
-	out_be32(&p->mr0, EMAC_MR0_SRST);
-	while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
-		--n;
-	local_irq_restore(flags);
-
-	if (n) {
-		dev->reset_failed = 0;
-		return 0;
-	} else {
-		emac_report_timeout_error(dev, "reset timeout");
-		dev->reset_failed = 1;
-		return -ETIMEDOUT;
-	}
-}
-
-static void emac_hash_mc(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	u16 gaht[4] = { 0 };
-	struct dev_mc_list *dmi;
-
-	DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count);
-
-	for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
-		int bit;
-		DECLARE_MAC_BUF(mac);
-		DBG2("%d: mc %s" NL,
-		     dev->def->index, print_mac(mac, dmi->dmi_addr));
-
-		bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26);
-		gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f);
-	}
-	out_be32(&p->gaht1, gaht[0]);
-	out_be32(&p->gaht2, gaht[1]);
-	out_be32(&p->gaht3, gaht[2]);
-	out_be32(&p->gaht4, gaht[3]);
-}
-
-static inline u32 emac_iff2rmr(struct net_device *ndev)
-{
-	u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE |
-	    EMAC_RMR_BASE;
-
-	if (ndev->flags & IFF_PROMISC)
-		r |= EMAC_RMR_PME;
-	else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32)
-		r |= EMAC_RMR_PMME;
-	else if (ndev->mc_count > 0)
-		r |= EMAC_RMR_MAE;
-
-	return r;
-}
-
-static inline int emac_opb_mhz(void)
-{
-	return (ocp_sys_info.opb_bus_freq + 500000) / 1000000;
-}
-
-/* BHs disabled */
-static int emac_configure(struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	struct net_device *ndev = dev->ndev;
-	int gige;
-	u32 r;
-
-	DBG("%d: configure" NL, dev->def->index);
-
-	if (emac_reset(dev) < 0)
-		return -ETIMEDOUT;
-
-	tah_reset(dev->tah_dev);
-
-	/* Mode register */
-	r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
-	if (dev->phy.duplex == DUPLEX_FULL)
-		r |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001;
-	dev->stop_timeout = STOP_TIMEOUT_10;
-	switch (dev->phy.speed) {
-	case SPEED_1000:
-		if (emac_phy_gpcs(dev->phy.mode)) {
-			r |= EMAC_MR1_MF_1000GPCS |
-			    EMAC_MR1_MF_IPPA(dev->phy.address);
-
-			/* Put some arbitrary OUI, Manuf & Rev IDs so we can
-			 * identify this GPCS PHY later.
-			 */
-			out_be32(&p->ipcr, 0xdeadbeef);
-		} else
-			r |= EMAC_MR1_MF_1000;
-		r |= EMAC_MR1_RFS_16K;
-		gige = 1;
-
-		if (dev->ndev->mtu > ETH_DATA_LEN) {
-			r |= EMAC_MR1_JPSM;
-			dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO;
-		} else
-			dev->stop_timeout = STOP_TIMEOUT_1000;
-		break;
-	case SPEED_100:
-		r |= EMAC_MR1_MF_100;
-		dev->stop_timeout = STOP_TIMEOUT_100;
-		/* Fall through */
-	default:
-		r |= EMAC_MR1_RFS_4K;
-		gige = 0;
-		break;
-	}
-
-	if (dev->rgmii_dev)
-		rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input,
-				dev->phy.speed);
-	else
-		zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed);
-
-#if !defined(CONFIG_40x)
-	/* on 40x erratum forces us to NOT use integrated flow control, 
-	 * let's hope it works on 44x ;)
-	 */
-	if (dev->phy.duplex == DUPLEX_FULL) {
-		if (dev->phy.pause)
-			r |= EMAC_MR1_EIFC | EMAC_MR1_APP;
-		else if (dev->phy.asym_pause)
-			r |= EMAC_MR1_APP;
-	}
-#endif
-	out_be32(&p->mr1, r);
-
-	/* Set individual MAC address */
-	out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
-	out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
-		 (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
-		 ndev->dev_addr[5]);
-
-	/* VLAN Tag Protocol ID */
-	out_be32(&p->vtpid, 0x8100);
-
-	/* Receive mode register */
-	r = emac_iff2rmr(ndev);
-	if (r & EMAC_RMR_MAE)
-		emac_hash_mc(dev);
-	out_be32(&p->rmr, r);
-
-	/* FIFOs thresholds */
-	r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1,
-		      EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE);
-	out_be32(&p->tmr1, r);
-	out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2));
-
-	/* PAUSE frame is sent when RX FIFO reaches its high-water mark,
-	   there should be still enough space in FIFO to allow the our link
-	   partner time to process this frame and also time to send PAUSE 
-	   frame itself.
-
-	   Here is the worst case scenario for the RX FIFO "headroom"
-	   (from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
-
-	   1) One maximum-length frame on TX                    1522 bytes
-	   2) One PAUSE frame time                                64 bytes
-	   3) PAUSE frame decode time allowance                   64 bytes
-	   4) One maximum-length frame on RX                    1522 bytes
-	   5) Round-trip propagation delay of the link (100Mb)    15 bytes
-	   ----------       
-	   3187 bytes
-
-	   I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
-	   low-water mark  to RX_FIFO_SIZE / 8 (512 bytes)
-	 */
-	r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE,
-		      EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE);
-	out_be32(&p->rwmr, r);
-
-	/* Set PAUSE timer to the maximum */
-	out_be32(&p->ptr, 0xffff);
-
-	/* IRQ sources */
-	out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE |
-		 EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
-		 EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
-		 EMAC_ISR_IRE | EMAC_ISR_TE);
-		 
-	/* We need to take GPCS PHY out of isolate mode after EMAC reset */
-	if (emac_phy_gpcs(dev->phy.mode)) 
-		mii_reset_phy(&dev->phy);
-		 
-	return 0;
-}
-
-/* BHs disabled */
-static void emac_reinitialize(struct ocp_enet_private *dev)
-{
-	DBG("%d: reinitialize" NL, dev->def->index);
-
-	if (!emac_configure(dev)) {
-		emac_tx_enable(dev);
-		emac_rx_enable(dev);
-	}
-}
-
-/* BHs disabled */
-static void emac_full_tx_reset(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	struct ocp_func_emac_data *emacdata = dev->def->additions;
-
-	DBG("%d: full_tx_reset" NL, dev->def->index);
-
-	emac_tx_disable(dev);
-	mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
-	emac_clean_tx_ring(dev);
-	dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
-
-	emac_configure(dev);
-
-	mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
-	emac_tx_enable(dev);
-	emac_rx_enable(dev);
-
-	netif_wake_queue(ndev);
-}
-
-static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	u32 r;
-	int n;
-
-	DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg);
-
-	/* Enable proper MDIO port */
-	zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
-
-	/* Wait for management interface to become idle */
-	n = 10;
-	while (!emac_phy_done(in_be32(&p->stacr))) {
-		udelay(1);
-		if (!--n)
-			goto to;
-	}
-
-	/* Issue read command */
-	out_be32(&p->stacr,
-		 EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
-		 (reg & EMAC_STACR_PRA_MASK)
-		 | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)
-		 | EMAC_STACR_START);
-
-	/* Wait for read to complete */
-	n = 100;
-	while (!emac_phy_done(r = in_be32(&p->stacr))) {
-		udelay(1);
-		if (!--n)
-			goto to;
-	}
-
-	if (unlikely(r & EMAC_STACR_PHYE)) {
-		DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index,
-		    id, reg);
-		return -EREMOTEIO;
-	}
-
-	r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
-	DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r);
-	return r;
-      to:
-	DBG("%d: MII management interface timeout (read)" NL, dev->def->index);
-	return -ETIMEDOUT;
-}
-
-static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
-			      u16 val)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	int n;
-
-	DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
-	     val);
-
-	/* Enable proper MDIO port */
-	zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
-
-	/* Wait for management interface to be idle */
-	n = 10;
-	while (!emac_phy_done(in_be32(&p->stacr))) {
-		udelay(1);
-		if (!--n)
-			goto to;
-	}
-
-	/* Issue write command */
-	out_be32(&p->stacr,
-		 EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
-		 (reg & EMAC_STACR_PRA_MASK) |
-		 ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
-		 (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START);
-
-	/* Wait for write to complete */
-	n = 100;
-	while (!emac_phy_done(in_be32(&p->stacr))) {
-		udelay(1);
-		if (!--n)
-			goto to;
-	}
-	return;
-      to:
-	DBG("%d: MII management interface timeout (write)" NL, dev->def->index);
-}
-
-static int emac_mdio_read(struct net_device *ndev, int id, int reg)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	int res;
-
-	local_bh_disable();
-	res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
-			       (u8) reg);
-	local_bh_enable();
-	return res;
-}
-
-static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-
-	local_bh_disable();
-	__emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
-			  (u8) reg, (u16) val);
-	local_bh_enable();
-}
-
-/* BHs disabled */
-static void emac_set_multicast_list(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	struct emac_regs __iomem *p = dev->emacp;
-	u32 rmr = emac_iff2rmr(ndev);
-
-	DBG("%d: multicast %08x" NL, dev->def->index, rmr);
-	BUG_ON(!netif_running(dev->ndev));
-
-	/* I decided to relax register access rules here to avoid
-	 * full EMAC reset.
-	 *
-	 * There is a real problem with EMAC4 core if we use MWSW_001 bit 
-	 * in MR1 register and do a full EMAC reset.
-	 * One TX BD status update is delayed and, after EMAC reset, it 
-	 * never happens, resulting in TX hung (it'll be recovered by TX 
-	 * timeout handler eventually, but this is just gross).
-	 * So we either have to do full TX reset or try to cheat here :)
-	 *
-	 * The only required change is to RX mode register, so I *think* all
-	 * we need is just to stop RX channel. This seems to work on all
-	 * tested SoCs.                                                --ebs
-	 */
-	emac_rx_disable(dev);
-	if (rmr & EMAC_RMR_MAE)
-		emac_hash_mc(dev);
-	out_be32(&p->rmr, rmr);
-	emac_rx_enable(dev);
-}
-
-/* BHs disabled */
-static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu)
-{
-	struct ocp_func_emac_data *emacdata = dev->def->additions;
-	int rx_sync_size = emac_rx_sync_size(new_mtu);
-	int rx_skb_size = emac_rx_skb_size(new_mtu);
-	int i, ret = 0;
-
-	emac_rx_disable(dev);
-	mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
-
-	if (dev->rx_sg_skb) {
-		++dev->estats.rx_dropped_resize;
-		dev_kfree_skb(dev->rx_sg_skb);
-		dev->rx_sg_skb = NULL;
-	}
-
-	/* Make a first pass over RX ring and mark BDs ready, dropping 
-	 * non-processed packets on the way. We need this as a separate pass
-	 * to simplify error recovery in the case of allocation failure later.
-	 */
-	for (i = 0; i < NUM_RX_BUFF; ++i) {
-		if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
-			++dev->estats.rx_dropped_resize;
-
-		dev->rx_desc[i].data_len = 0;
-		dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
-		    (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-	}
-
-	/* Reallocate RX ring only if bigger skb buffers are required */
-	if (rx_skb_size <= dev->rx_skb_size)
-		goto skip;
-
-	/* Second pass, allocate new skbs */
-	for (i = 0; i < NUM_RX_BUFF; ++i) {
-		struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
-		if (!skb) {
-			ret = -ENOMEM;
-			goto oom;
-		}
-
-		BUG_ON(!dev->rx_skb[i]);
-		dev_kfree_skb(dev->rx_skb[i]);
-
-		skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
-		dev->rx_desc[i].data_ptr =
-		    dma_map_single(dev->ldev, skb->data - 2, rx_sync_size,
-				   DMA_FROM_DEVICE) + 2;
-		dev->rx_skb[i] = skb;
-	}
-      skip:
-	/* Check if we need to change "Jumbo" bit in MR1 */
-	if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
-		/* This is to prevent starting RX channel in emac_rx_enable() */
-		dev->commac.rx_stopped = 1;
-
-		dev->ndev->mtu = new_mtu;
-		emac_full_tx_reset(dev->ndev);
-	}
-
-	mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu));
-      oom:
-	/* Restart RX */
-	dev->commac.rx_stopped = dev->rx_slot = 0;
-	mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
-	emac_rx_enable(dev);
-
-	return ret;
-}
-
-/* Process ctx, rtnl_lock semaphore */
-static int emac_change_mtu(struct net_device *ndev, int new_mtu)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	int ret = 0;
-
-	if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU)
-		return -EINVAL;
-
-	DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu);
-
-	local_bh_disable();
-	if (netif_running(ndev)) {
-		/* Check if we really need to reinitalize RX ring */
-		if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
-			ret = emac_resize_rx_ring(dev, new_mtu);
-	}
-
-	if (!ret) {
-		ndev->mtu = new_mtu;
-		dev->rx_skb_size = emac_rx_skb_size(new_mtu);
-		dev->rx_sync_size = emac_rx_sync_size(new_mtu);
-	}	
-	local_bh_enable();
-
-	return ret;
-}
-
-static void emac_clean_tx_ring(struct ocp_enet_private *dev)
-{
-	int i;
-	for (i = 0; i < NUM_TX_BUFF; ++i) {
-		if (dev->tx_skb[i]) {
-			dev_kfree_skb(dev->tx_skb[i]);
-			dev->tx_skb[i] = NULL;
-			if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
-				++dev->estats.tx_dropped;
-		}
-		dev->tx_desc[i].ctrl = 0;
-		dev->tx_desc[i].data_ptr = 0;
-	}
-}
-
-static void emac_clean_rx_ring(struct ocp_enet_private *dev)
-{
-	int i;
-	for (i = 0; i < NUM_RX_BUFF; ++i)
-		if (dev->rx_skb[i]) {
-			dev->rx_desc[i].ctrl = 0;
-			dev_kfree_skb(dev->rx_skb[i]);
-			dev->rx_skb[i] = NULL;
-			dev->rx_desc[i].data_ptr = 0;
-		}
-
-	if (dev->rx_sg_skb) {
-		dev_kfree_skb(dev->rx_sg_skb);
-		dev->rx_sg_skb = NULL;
-	}
-}
-
-static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
-				    gfp_t flags)
-{
-	struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
-	if (unlikely(!skb))
-		return -ENOMEM;
-
-	dev->rx_skb[slot] = skb;
-	dev->rx_desc[slot].data_len = 0;
-
-	skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
-	dev->rx_desc[slot].data_ptr = 
-	    dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size, 
-			   DMA_FROM_DEVICE) + 2;
-	barrier();
-	dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
-	    (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-
-	return 0;
-}
-
-static void emac_print_link_status(struct ocp_enet_private *dev)
-{
-	if (netif_carrier_ok(dev->ndev))
-		printk(KERN_INFO "%s: link is up, %d %s%s\n",
-		       dev->ndev->name, dev->phy.speed,
-		       dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
-		       dev->phy.pause ? ", pause enabled" :
-		       dev->phy.asym_pause ? ", assymetric pause enabled" : "");
-	else
-		printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
-}
-
-/* Process ctx, rtnl_lock semaphore */
-static int emac_open(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	struct ocp_func_emac_data *emacdata = dev->def->additions;
-	int err, i;
-
-	DBG("%d: open" NL, dev->def->index);
-
-	/* Setup error IRQ handler */
-	err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev);
-	if (err) {
-		printk(KERN_ERR "%s: failed to request IRQ %d\n",
-		       ndev->name, dev->def->irq);
-		return err;
-	}
-
-	/* Allocate RX ring */
-	for (i = 0; i < NUM_RX_BUFF; ++i)
-		if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
-			printk(KERN_ERR "%s: failed to allocate RX ring\n",
-			       ndev->name);
-			goto oom;
-		}
-
-	local_bh_disable();
-	dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot =
-	    dev->commac.rx_stopped = 0;
-	dev->rx_sg_skb = NULL;
-
-	if (dev->phy.address >= 0) {
-		int link_poll_interval;
-		if (dev->phy.def->ops->poll_link(&dev->phy)) {
-			dev->phy.def->ops->read_link(&dev->phy);
-			EMAC_RX_CLK_DEFAULT(dev->def->index);
-			netif_carrier_on(dev->ndev);
-			link_poll_interval = PHY_POLL_LINK_ON;
-		} else {
-			EMAC_RX_CLK_TX(dev->def->index);
-			netif_carrier_off(dev->ndev);
-			link_poll_interval = PHY_POLL_LINK_OFF;
-		}
-		mod_timer(&dev->link_timer, jiffies + link_poll_interval);
-		emac_print_link_status(dev);
-	} else
-		netif_carrier_on(dev->ndev);
-
-	emac_configure(dev);
-	mal_poll_add(dev->mal, &dev->commac);
-	mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
-	mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu));
-	mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
-	emac_tx_enable(dev);
-	emac_rx_enable(dev);
-	netif_start_queue(ndev);
-	local_bh_enable();
-
-	return 0;
-      oom:
-	emac_clean_rx_ring(dev);
-	free_irq(dev->def->irq, dev);
-	return -ENOMEM;
-}
-
-/* BHs disabled */
-static int emac_link_differs(struct ocp_enet_private *dev)
-{
-	u32 r = in_be32(&dev->emacp->mr1);
-
-	int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
-	int speed, pause, asym_pause;
-
-	if (r & EMAC_MR1_MF_1000)
-		speed = SPEED_1000;
-	else if (r & EMAC_MR1_MF_100)
-		speed = SPEED_100;
-	else
-		speed = SPEED_10;
-
-	switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
-	case (EMAC_MR1_EIFC | EMAC_MR1_APP):
-		pause = 1;
-		asym_pause = 0;
-		break;
-	case EMAC_MR1_APP:
-		pause = 0;
-		asym_pause = 1;
-		break;
-	default:
-		pause = asym_pause = 0;
-	}
-	return speed != dev->phy.speed || duplex != dev->phy.duplex ||
-	    pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
-}
-
-/* BHs disabled */
-static void emac_link_timer(unsigned long data)
-{
-	struct ocp_enet_private *dev = (struct ocp_enet_private *)data;
-	int link_poll_interval;
-
-	DBG2("%d: link timer" NL, dev->def->index);
-
-	if (dev->phy.def->ops->poll_link(&dev->phy)) {
-		if (!netif_carrier_ok(dev->ndev)) {
-			EMAC_RX_CLK_DEFAULT(dev->def->index);
-
-			/* Get new link parameters */
-			dev->phy.def->ops->read_link(&dev->phy);
-
-			if (dev->tah_dev || emac_link_differs(dev))
-				emac_full_tx_reset(dev->ndev);
-
-			netif_carrier_on(dev->ndev);
-			emac_print_link_status(dev);
-		}
-		link_poll_interval = PHY_POLL_LINK_ON;
-	} else {
-		if (netif_carrier_ok(dev->ndev)) {
-			EMAC_RX_CLK_TX(dev->def->index);
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
-			emac_reinitialize(dev);
-#endif
-			netif_carrier_off(dev->ndev);
-			emac_print_link_status(dev);
-		}
-
-		/* Retry reset if the previous attempt failed.
-		 * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX
-		 * case, but I left it here because it shouldn't trigger for
-		 * sane PHYs anyway.
-		 */
-		if (unlikely(dev->reset_failed))
-			emac_reinitialize(dev);
-
-		link_poll_interval = PHY_POLL_LINK_OFF;
-	}
-	mod_timer(&dev->link_timer, jiffies + link_poll_interval);
-}
-
-/* BHs disabled */
-static void emac_force_link_update(struct ocp_enet_private *dev)
-{
-	netif_carrier_off(dev->ndev);
-	if (timer_pending(&dev->link_timer))
-		mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF);
-}
-
-/* Process ctx, rtnl_lock semaphore */
-static int emac_close(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	struct ocp_func_emac_data *emacdata = dev->def->additions;
-
-	DBG("%d: close" NL, dev->def->index);
-
-	local_bh_disable();
-
-	if (dev->phy.address >= 0)
-		del_timer_sync(&dev->link_timer);
-
-	netif_stop_queue(ndev);
-	emac_rx_disable(dev);
-	emac_tx_disable(dev);
-	mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
-	mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
-	mal_poll_del(dev->mal, &dev->commac);
-	local_bh_enable();
-
-	emac_clean_tx_ring(dev);
-	emac_clean_rx_ring(dev);
-	free_irq(dev->def->irq, dev);
-
-	return 0;
-}
-
-static inline u16 emac_tx_csum(struct ocp_enet_private *dev,
-			       struct sk_buff *skb)
-{
-#if defined(CONFIG_IBM_EMAC_TAH)
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		++dev->stats.tx_packets_csum;
-		return EMAC_TX_CTRL_TAH_CSUM;
-	}
-#endif
-	return 0;
-}
-
-static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-	struct net_device *ndev = dev->ndev;
-
-	/* Send the packet out */
-	out_be32(&p->tmr0, EMAC_TMR0_XMIT);
-
-	if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
-		netif_stop_queue(ndev);
-		DBG2("%d: stopped TX queue" NL, dev->def->index);
-	}
-
-	ndev->trans_start = jiffies;
-	++dev->stats.tx_packets;
-	dev->stats.tx_bytes += len;
-
-	return 0;
-}
-
-/* BHs disabled */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	unsigned int len = skb->len;
-	int slot;
-
-	u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
-	    MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
-
-	slot = dev->tx_slot++;
-	if (dev->tx_slot == NUM_TX_BUFF) {
-		dev->tx_slot = 0;
-		ctrl |= MAL_TX_CTRL_WRAP;
-	}
-
-	DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot);
-
-	dev->tx_skb[slot] = skb;
-	dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len,
-						     DMA_TO_DEVICE);
-	dev->tx_desc[slot].data_len = (u16) len;
-	barrier();
-	dev->tx_desc[slot].ctrl = ctrl;
-
-	return emac_xmit_finish(dev, len);
-}
-
-#if defined(CONFIG_IBM_EMAC_TAH)
-static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot,
-				  u32 pd, int len, int last, u16 base_ctrl)
-{
-	while (1) {
-		u16 ctrl = base_ctrl;
-		int chunk = min(len, MAL_MAX_TX_SIZE);
-		len -= chunk;
-
-		slot = (slot + 1) % NUM_TX_BUFF;
-
-		if (last && !len)
-			ctrl |= MAL_TX_CTRL_LAST;
-		if (slot == NUM_TX_BUFF - 1)
-			ctrl |= MAL_TX_CTRL_WRAP;
-
-		dev->tx_skb[slot] = NULL;
-		dev->tx_desc[slot].data_ptr = pd;
-		dev->tx_desc[slot].data_len = (u16) chunk;
-		dev->tx_desc[slot].ctrl = ctrl;
-		++dev->tx_cnt;
-
-		if (!len)
-			break;
-
-		pd += chunk;
-	}
-	return slot;
-}
-
-/* BHs disabled (SG version for TAH equipped EMACs) */
-static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	int nr_frags = skb_shinfo(skb)->nr_frags;
-	int len = skb->len, chunk;
-	int slot, i;
-	u16 ctrl;
-	u32 pd;
-
-	/* This is common "fast" path */
-	if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
-		return emac_start_xmit(skb, ndev);
-
-	len -= skb->data_len;
-
-	/* Note, this is only an *estimation*, we can still run out of empty
-	 * slots because of the additional fragmentation into
-	 * MAL_MAX_TX_SIZE-sized chunks
-	 */
-	if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
-		goto stop_queue;
-
-	ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
-	    emac_tx_csum(dev, skb);
-	slot = dev->tx_slot;
-
-	/* skb data */
-	dev->tx_skb[slot] = NULL;
-	chunk = min(len, MAL_MAX_TX_SIZE);
-	dev->tx_desc[slot].data_ptr = pd =
-	    dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE);
-	dev->tx_desc[slot].data_len = (u16) chunk;
-	len -= chunk;
-	if (unlikely(len))
-		slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
-				       ctrl);
-	/* skb fragments */
-	for (i = 0; i < nr_frags; ++i) {
-		struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
-		len = frag->size;
-
-		if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
-			goto undo_frame;
-
-		pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len,
-				  DMA_TO_DEVICE);
-
-		slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
-				       ctrl);
-	}
-
-	DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len,
-	     dev->tx_slot, slot);
-
-	/* Attach skb to the last slot so we don't release it too early */
-	dev->tx_skb[slot] = skb;
-
-	/* Send the packet out */
-	if (dev->tx_slot == NUM_TX_BUFF - 1)
-		ctrl |= MAL_TX_CTRL_WRAP;
-	barrier();
-	dev->tx_desc[dev->tx_slot].ctrl = ctrl;
-	dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
-
-	return emac_xmit_finish(dev, skb->len);
-
-      undo_frame:
-	/* Well, too bad. Our previous estimation was overly optimistic. 
-	 * Undo everything.
-	 */
-	while (slot != dev->tx_slot) {
-		dev->tx_desc[slot].ctrl = 0;
-		--dev->tx_cnt;
-		if (--slot < 0)
-			slot = NUM_TX_BUFF - 1;
-	}
-	++dev->estats.tx_undo;
-
-      stop_queue:
-	netif_stop_queue(ndev);
-	DBG2("%d: stopped TX queue" NL, dev->def->index);
-	return 1;
-}
-#else
-# define emac_start_xmit_sg	emac_start_xmit
-#endif	/* !defined(CONFIG_IBM_EMAC_TAH) */
-
-/* BHs disabled */
-static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl)
-{
-	struct ibm_emac_error_stats *st = &dev->estats;
-	DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl);
-
-	++st->tx_bd_errors;
-	if (ctrl & EMAC_TX_ST_BFCS)
-		++st->tx_bd_bad_fcs;
-	if (ctrl & EMAC_TX_ST_LCS)
-		++st->tx_bd_carrier_loss;
-	if (ctrl & EMAC_TX_ST_ED)
-		++st->tx_bd_excessive_deferral;
-	if (ctrl & EMAC_TX_ST_EC)
-		++st->tx_bd_excessive_collisions;
-	if (ctrl & EMAC_TX_ST_LC)
-		++st->tx_bd_late_collision;
-	if (ctrl & EMAC_TX_ST_MC)
-		++st->tx_bd_multple_collisions;
-	if (ctrl & EMAC_TX_ST_SC)
-		++st->tx_bd_single_collision;
-	if (ctrl & EMAC_TX_ST_UR)
-		++st->tx_bd_underrun;
-	if (ctrl & EMAC_TX_ST_SQE)
-		++st->tx_bd_sqe;
-}
-
-static void emac_poll_tx(void *param)
-{
-	struct ocp_enet_private *dev = param;
-	DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt,
-	     dev->ack_slot);
-
-	if (dev->tx_cnt) {
-		u16 ctrl;
-		int slot = dev->ack_slot, n = 0;
-	      again:
-		ctrl = dev->tx_desc[slot].ctrl;
-		if (!(ctrl & MAL_TX_CTRL_READY)) {
-			struct sk_buff *skb = dev->tx_skb[slot];
-			++n;
-
-			if (skb) {
-				dev_kfree_skb(skb);
-				dev->tx_skb[slot] = NULL;
-			}
-			slot = (slot + 1) % NUM_TX_BUFF;
-
-			if (unlikely(EMAC_IS_BAD_TX(ctrl)))
-				emac_parse_tx_error(dev, ctrl);
-
-			if (--dev->tx_cnt)
-				goto again;
-		}
-		if (n) {
-			dev->ack_slot = slot;
-			if (netif_queue_stopped(dev->ndev) &&
-			    dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
-				netif_wake_queue(dev->ndev);
-
-			DBG2("%d: tx %d pkts" NL, dev->def->index, n);
-		}
-	}
-}
-
-static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot,
-				       int len)
-{
-	struct sk_buff *skb = dev->rx_skb[slot];
-	DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len);
-
-	if (len) 
-		dma_map_single(dev->ldev, skb->data - 2, 
-			       EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
-
-	dev->rx_desc[slot].data_len = 0;
-	barrier();
-	dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
-	    (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-}
-
-static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl)
-{
-	struct ibm_emac_error_stats *st = &dev->estats;
-	DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl);
-
-	++st->rx_bd_errors;
-	if (ctrl & EMAC_RX_ST_OE)
-		++st->rx_bd_overrun;
-	if (ctrl & EMAC_RX_ST_BP)
-		++st->rx_bd_bad_packet;
-	if (ctrl & EMAC_RX_ST_RP)
-		++st->rx_bd_runt_packet;
-	if (ctrl & EMAC_RX_ST_SE)
-		++st->rx_bd_short_event;
-	if (ctrl & EMAC_RX_ST_AE)
-		++st->rx_bd_alignment_error;
-	if (ctrl & EMAC_RX_ST_BFCS)
-		++st->rx_bd_bad_fcs;
-	if (ctrl & EMAC_RX_ST_PTL)
-		++st->rx_bd_packet_too_long;
-	if (ctrl & EMAC_RX_ST_ORE)
-		++st->rx_bd_out_of_range;
-	if (ctrl & EMAC_RX_ST_IRE)
-		++st->rx_bd_in_range;
-}
-
-static inline void emac_rx_csum(struct ocp_enet_private *dev,
-				struct sk_buff *skb, u16 ctrl)
-{
-#if defined(CONFIG_IBM_EMAC_TAH)
-	if (!ctrl && dev->tah_dev) {
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-		++dev->stats.rx_packets_csum;
-	}
-#endif
-}
-
-static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot)
-{
-	if (likely(dev->rx_sg_skb != NULL)) {
-		int len = dev->rx_desc[slot].data_len;
-		int tot_len = dev->rx_sg_skb->len + len;
-
-		if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
-			++dev->estats.rx_dropped_mtu;
-			dev_kfree_skb(dev->rx_sg_skb);
-			dev->rx_sg_skb = NULL;
-		} else {
-			cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb),
-					 dev->rx_skb[slot]->data, len);
-			skb_put(dev->rx_sg_skb, len);
-			emac_recycle_rx_skb(dev, slot, len);
-			return 0;
-		}
-	}
-	emac_recycle_rx_skb(dev, slot, 0);
-	return -1;
-}
-
-/* BHs disabled */
-static int emac_poll_rx(void *param, int budget)
-{
-	struct ocp_enet_private *dev = param;
-	int slot = dev->rx_slot, received = 0;
-
-	DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget);
-
-      again:
-	while (budget > 0) {
-		int len;
-		struct sk_buff *skb;
-		u16 ctrl = dev->rx_desc[slot].ctrl;
-
-		if (ctrl & MAL_RX_CTRL_EMPTY)
-			break;
-
-		skb = dev->rx_skb[slot];
-		barrier();
-		len = dev->rx_desc[slot].data_len;
-
-		if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
-			goto sg;
-
-		ctrl &= EMAC_BAD_RX_MASK;
-		if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
-			emac_parse_rx_error(dev, ctrl);
-			++dev->estats.rx_dropped_error;
-			emac_recycle_rx_skb(dev, slot, 0);
-			len = 0;
-			goto next;
-		}
-
-		if (len && len < EMAC_RX_COPY_THRESH) {
-			struct sk_buff *copy_skb =
-			    alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
-			if (unlikely(!copy_skb))
-				goto oom;
-
-			skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
-			cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
-					 len + 2);
-			emac_recycle_rx_skb(dev, slot, len);
-			skb = copy_skb;
-		} else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
-			goto oom;
-
-		skb_put(skb, len);
-	      push_packet:
-		skb->protocol = eth_type_trans(skb, dev->ndev);
-		emac_rx_csum(dev, skb, ctrl);
-
-		if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
-			++dev->estats.rx_dropped_stack;
-	      next:
-		++dev->stats.rx_packets;
-	      skip:
-		dev->stats.rx_bytes += len;
-		slot = (slot + 1) % NUM_RX_BUFF;
-		--budget;
-		++received;
-		continue;
-	      sg:
-		if (ctrl & MAL_RX_CTRL_FIRST) {
-			BUG_ON(dev->rx_sg_skb);
-			if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
-				DBG("%d: rx OOM %d" NL, dev->def->index, slot);
-				++dev->estats.rx_dropped_oom;
-				emac_recycle_rx_skb(dev, slot, 0);
-			} else {
-				dev->rx_sg_skb = skb;
-				skb_put(skb, len);
-			}
-		} else if (!emac_rx_sg_append(dev, slot) &&
-			   (ctrl & MAL_RX_CTRL_LAST)) {
-
-			skb = dev->rx_sg_skb;
-			dev->rx_sg_skb = NULL;
-
-			ctrl &= EMAC_BAD_RX_MASK;
-			if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
-				emac_parse_rx_error(dev, ctrl);
-				++dev->estats.rx_dropped_error;
-				dev_kfree_skb(skb);
-				len = 0;
-			} else
-				goto push_packet;
-		}
-		goto skip;
-	      oom:
-		DBG("%d: rx OOM %d" NL, dev->def->index, slot);
-		/* Drop the packet and recycle skb */
-		++dev->estats.rx_dropped_oom;
-		emac_recycle_rx_skb(dev, slot, 0);
-		goto next;
-	}
-
-	if (received) {
-		DBG2("%d: rx %d BDs" NL, dev->def->index, received);
-		dev->rx_slot = slot;
-	}
-
-	if (unlikely(budget && dev->commac.rx_stopped)) {
-		struct ocp_func_emac_data *emacdata = dev->def->additions;
-
-		barrier();
-		if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
-			DBG2("%d: rx restart" NL, dev->def->index);
-			received = 0;
-			goto again;
-		}
-
-		if (dev->rx_sg_skb) {
-			DBG2("%d: dropping partial rx packet" NL,
-			     dev->def->index);
-			++dev->estats.rx_dropped_error;
-			dev_kfree_skb(dev->rx_sg_skb);
-			dev->rx_sg_skb = NULL;
-		}
-
-		dev->commac.rx_stopped = 0;
-		mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
-		emac_rx_enable(dev);
-		dev->rx_slot = 0;
-	}
-	return received;
-}
-
-/* BHs disabled */
-static int emac_peek_rx(void *param)
-{
-	struct ocp_enet_private *dev = param;
-	return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
-}
-
-/* BHs disabled */
-static int emac_peek_rx_sg(void *param)
-{
-	struct ocp_enet_private *dev = param;
-	int slot = dev->rx_slot;
-	while (1) {
-		u16 ctrl = dev->rx_desc[slot].ctrl;
-		if (ctrl & MAL_RX_CTRL_EMPTY)
-			return 0;
-		else if (ctrl & MAL_RX_CTRL_LAST)
-			return 1;
-
-		slot = (slot + 1) % NUM_RX_BUFF;
-
-		/* I'm just being paranoid here :) */
-		if (unlikely(slot == dev->rx_slot))
-			return 0;
-	}
-}
-
-/* Hard IRQ */
-static void emac_rxde(void *param)
-{
-	struct ocp_enet_private *dev = param;
-	++dev->estats.rx_stopped;
-	emac_rx_disable_async(dev);
-}
-
-/* Hard IRQ */
-static irqreturn_t emac_irq(int irq, void *dev_instance)
-{
-	struct ocp_enet_private *dev = dev_instance;
-	struct emac_regs __iomem *p = dev->emacp;
-	struct ibm_emac_error_stats *st = &dev->estats;
-
-	u32 isr = in_be32(&p->isr);
-	out_be32(&p->isr, isr);
-
-	DBG("%d: isr = %08x" NL, dev->def->index, isr);
-
-	if (isr & EMAC_ISR_TXPE)
-		++st->tx_parity;
-	if (isr & EMAC_ISR_RXPE)
-		++st->rx_parity;
-	if (isr & EMAC_ISR_TXUE)
-		++st->tx_underrun;
-	if (isr & EMAC_ISR_RXOE)
-		++st->rx_fifo_overrun;
-	if (isr & EMAC_ISR_OVR)
-		++st->rx_overrun;
-	if (isr & EMAC_ISR_BP)
-		++st->rx_bad_packet;
-	if (isr & EMAC_ISR_RP)
-		++st->rx_runt_packet;
-	if (isr & EMAC_ISR_SE)
-		++st->rx_short_event;
-	if (isr & EMAC_ISR_ALE)
-		++st->rx_alignment_error;
-	if (isr & EMAC_ISR_BFCS)
-		++st->rx_bad_fcs;
-	if (isr & EMAC_ISR_PTLE)
-		++st->rx_packet_too_long;
-	if (isr & EMAC_ISR_ORE)
-		++st->rx_out_of_range;
-	if (isr & EMAC_ISR_IRE)
-		++st->rx_in_range;
-	if (isr & EMAC_ISR_SQE)
-		++st->tx_sqe;
-	if (isr & EMAC_ISR_TE)
-		++st->tx_errors;
-
-	return IRQ_HANDLED;
-}
-
-static struct net_device_stats *emac_stats(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	struct ibm_emac_stats *st = &dev->stats;
-	struct ibm_emac_error_stats *est = &dev->estats;
-	struct net_device_stats *nst = &dev->nstats;
-
-	DBG2("%d: stats" NL, dev->def->index);
-
-	/* Compute "legacy" statistics */
-	local_irq_disable();
-	nst->rx_packets = (unsigned long)st->rx_packets;
-	nst->rx_bytes = (unsigned long)st->rx_bytes;
-	nst->tx_packets = (unsigned long)st->tx_packets;
-	nst->tx_bytes = (unsigned long)st->tx_bytes;
-	nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
-					  est->rx_dropped_error +
-					  est->rx_dropped_resize +
-					  est->rx_dropped_mtu);
-	nst->tx_dropped = (unsigned long)est->tx_dropped;
-
-	nst->rx_errors = (unsigned long)est->rx_bd_errors;
-	nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
-					      est->rx_fifo_overrun +
-					      est->rx_overrun);
-	nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
-					       est->rx_alignment_error);
-	nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
-					     est->rx_bad_fcs);
-	nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
-						est->rx_bd_short_event +
-						est->rx_bd_packet_too_long +
-						est->rx_bd_out_of_range +
-						est->rx_bd_in_range +
-						est->rx_runt_packet +
-						est->rx_short_event +
-						est->rx_packet_too_long +
-						est->rx_out_of_range +
-						est->rx_in_range);
-
-	nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
-	nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
-					      est->tx_underrun);
-	nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
-	nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
-					  est->tx_bd_excessive_collisions +
-					  est->tx_bd_late_collision +
-					  est->tx_bd_multple_collisions);
-	local_irq_enable();
-	return nst;
-}
-
-static void emac_remove(struct ocp_device *ocpdev)
-{
-	struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev);
-
-	DBG("%d: remove" NL, dev->def->index);
-
-	ocp_set_drvdata(ocpdev, NULL);
-	unregister_netdev(dev->ndev);
-
-	tah_fini(dev->tah_dev);
-	rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
-	zmii_fini(dev->zmii_dev, dev->zmii_input);
-
-	emac_dbg_register(dev->def->index, NULL);
-
-	mal_unregister_commac(dev->mal, &dev->commac);
-	iounmap(dev->emacp);
-	kfree(dev->ndev);
-}
-
-static struct mal_commac_ops emac_commac_ops = {
-	.poll_tx = &emac_poll_tx,
-	.poll_rx = &emac_poll_rx,
-	.peek_rx = &emac_peek_rx,
-	.rxde = &emac_rxde,
-};
-
-static struct mal_commac_ops emac_commac_sg_ops = {
-	.poll_tx = &emac_poll_tx,
-	.poll_rx = &emac_poll_rx,
-	.peek_rx = &emac_peek_rx_sg,
-	.rxde = &emac_rxde,
-};
-
-/* Ethtool support */
-static int emac_ethtool_get_settings(struct net_device *ndev,
-				     struct ethtool_cmd *cmd)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-
-	cmd->supported = dev->phy.features;
-	cmd->port = PORT_MII;
-	cmd->phy_address = dev->phy.address;
-	cmd->transceiver =
-	    dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
-
-	local_bh_disable();
-	cmd->advertising = dev->phy.advertising;
-	cmd->autoneg = dev->phy.autoneg;
-	cmd->speed = dev->phy.speed;
-	cmd->duplex = dev->phy.duplex;
-	local_bh_enable();
-
-	return 0;
-}
-
-static int emac_ethtool_set_settings(struct net_device *ndev,
-				     struct ethtool_cmd *cmd)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	u32 f = dev->phy.features;
-
-	DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index,
-	    cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
-
-	/* Basic sanity checks */
-	if (dev->phy.address < 0)
-		return -EOPNOTSUPP;
-	if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
-		return -EINVAL;
-	if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
-		return -EINVAL;
-	if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
-		return -EINVAL;
-
-	if (cmd->autoneg == AUTONEG_DISABLE) {
-		switch (cmd->speed) {
-		case SPEED_10:
-			if (cmd->duplex == DUPLEX_HALF
-			    && !(f & SUPPORTED_10baseT_Half))
-				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL
-			    && !(f & SUPPORTED_10baseT_Full))
-				return -EINVAL;
-			break;
-		case SPEED_100:
-			if (cmd->duplex == DUPLEX_HALF
-			    && !(f & SUPPORTED_100baseT_Half))
-				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL
-			    && !(f & SUPPORTED_100baseT_Full))
-				return -EINVAL;
-			break;
-		case SPEED_1000:
-			if (cmd->duplex == DUPLEX_HALF
-			    && !(f & SUPPORTED_1000baseT_Half))
-				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL
-			    && !(f & SUPPORTED_1000baseT_Full))
-				return -EINVAL;
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		local_bh_disable();
-		dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
-						cmd->duplex);
-
-	} else {
-		if (!(f & SUPPORTED_Autoneg))
-			return -EINVAL;
-
-		local_bh_disable();
-		dev->phy.def->ops->setup_aneg(&dev->phy,
-					      (cmd->advertising & f) |
-					      (dev->phy.advertising &
-					       (ADVERTISED_Pause |
-						ADVERTISED_Asym_Pause)));
-	}
-	emac_force_link_update(dev);
-	local_bh_enable();
-
-	return 0;
-}
-
-static void emac_ethtool_get_ringparam(struct net_device *ndev,
-				       struct ethtool_ringparam *rp)
-{
-	rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
-	rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
-}
-
-static void emac_ethtool_get_pauseparam(struct net_device *ndev,
-					struct ethtool_pauseparam *pp)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-
-	local_bh_disable();
-	if ((dev->phy.features & SUPPORTED_Autoneg) &&
-	    (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
-		pp->autoneg = 1;
-
-	if (dev->phy.duplex == DUPLEX_FULL) {
-		if (dev->phy.pause)
-			pp->rx_pause = pp->tx_pause = 1;
-		else if (dev->phy.asym_pause)
-			pp->tx_pause = 1;
-	}
-	local_bh_enable();
-}
-
-static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	return dev->tah_dev != 0;
-}
-
-static int emac_get_regs_len(struct ocp_enet_private *dev)
-{
-	return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE;
-}
-
-static int emac_ethtool_get_regs_len(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	return sizeof(struct emac_ethtool_regs_hdr) +
-	    emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) +
-	    zmii_get_regs_len(dev->zmii_dev) +
-	    rgmii_get_regs_len(dev->rgmii_dev) +
-	    tah_get_regs_len(dev->tah_dev);
-}
-
-static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf)
-{
-	struct emac_ethtool_regs_subhdr *hdr = buf;
-
-	hdr->version = EMAC_ETHTOOL_REGS_VER;
-	hdr->index = dev->def->index;
-	memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE);
-	return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE);
-}
-
-static void emac_ethtool_get_regs(struct net_device *ndev,
-				  struct ethtool_regs *regs, void *buf)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	struct emac_ethtool_regs_hdr *hdr = buf;
-
-	hdr->components = 0;
-	buf = hdr + 1;
-
-	local_irq_disable();
-	buf = mal_dump_regs(dev->mal, buf);
-	buf = emac_dump_regs(dev, buf);
-	if (dev->zmii_dev) {
-		hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
-		buf = zmii_dump_regs(dev->zmii_dev, buf);
-	}
-	if (dev->rgmii_dev) {
-		hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
-		buf = rgmii_dump_regs(dev->rgmii_dev, buf);
-	}
-	if (dev->tah_dev) {
-		hdr->components |= EMAC_ETHTOOL_REGS_TAH;
-		buf = tah_dump_regs(dev->tah_dev, buf);
-	}
-	local_irq_enable();
-}
-
-static int emac_ethtool_nway_reset(struct net_device *ndev)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	int res = 0;
-
-	DBG("%d: nway_reset" NL, dev->def->index);
-
-	if (dev->phy.address < 0)
-		return -EOPNOTSUPP;
-
-	local_bh_disable();
-	if (!dev->phy.autoneg) {
-		res = -EINVAL;
-		goto out;
-	}
-
-	dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
-	emac_force_link_update(dev);
-
-      out:
-	local_bh_enable();
-	return res;
-}
-
-static int emac_get_sset_count(struct net_device *ndev, int sset)
-{
-	switch (sset) {
-	case ETH_SS_STATS:
-		return EMAC_ETHTOOL_STATS_COUNT;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
-				     u8 * buf)
-{
-	if (stringset == ETH_SS_STATS)
-		memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
-}
-
-static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
-					   struct ethtool_stats *estats,
-					   u64 * tmp_stats)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	local_irq_disable();
-	memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
-	tmp_stats += sizeof(dev->stats) / sizeof(u64);
-	memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
-	local_irq_enable();
-}
-
-static void emac_ethtool_get_drvinfo(struct net_device *ndev,
-				     struct ethtool_drvinfo *info)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-
-	strcpy(info->driver, "ibm_emac");
-	strcpy(info->version, DRV_VERSION);
-	info->fw_version[0] = '\0';
-	sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index);
-	info->regdump_len = emac_ethtool_get_regs_len(ndev);
-}
-
-static const struct ethtool_ops emac_ethtool_ops = {
-	.get_settings = emac_ethtool_get_settings,
-	.set_settings = emac_ethtool_set_settings,
-	.get_drvinfo = emac_ethtool_get_drvinfo,
-
-	.get_regs_len = emac_ethtool_get_regs_len,
-	.get_regs = emac_ethtool_get_regs,
-
-	.nway_reset = emac_ethtool_nway_reset,
-
-	.get_ringparam = emac_ethtool_get_ringparam,
-	.get_pauseparam = emac_ethtool_get_pauseparam,
-
-	.get_rx_csum = emac_ethtool_get_rx_csum,
-
-	.get_strings = emac_ethtool_get_strings,
-	.get_sset_count = emac_get_sset_count,
-	.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
-
-	.get_link = ethtool_op_get_link,
-};
-
-static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
-{
-	struct ocp_enet_private *dev = ndev->priv;
-	uint16_t *data = (uint16_t *) & rq->ifr_ifru;
-
-	DBG("%d: ioctl %08x" NL, dev->def->index, cmd);
-
-	if (dev->phy.address < 0)
-		return -EOPNOTSUPP;
-
-	switch (cmd) {
-	case SIOCGMIIPHY:
-	case SIOCDEVPRIVATE:
-		data[0] = dev->phy.address;
-		/* Fall through */
-	case SIOCGMIIREG:
-	case SIOCDEVPRIVATE + 1:
-		data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
-		return 0;
-
-	case SIOCSMIIREG:
-	case SIOCDEVPRIVATE + 2:
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static int __init emac_probe(struct ocp_device *ocpdev)
-{
-	struct ocp_func_emac_data *emacdata = ocpdev->def->additions;
-	struct net_device *ndev;
-	struct ocp_device *maldev;
-	struct ocp_enet_private *dev;
-	int err, i;
-	DECLARE_MAC_BUF(mac);
-
-	DBG("%d: probe" NL, ocpdev->def->index);
-
-	if (!emacdata) {
-		printk(KERN_ERR "emac%d: Missing additional data!\n",
-		       ocpdev->def->index);
-		return -ENODEV;
-	}
-
-	/* Allocate our net_device structure */
-	ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
-	if (!ndev) {
-		printk(KERN_ERR "emac%d: could not allocate ethernet device!\n",
-		       ocpdev->def->index);
-		return -ENOMEM;
-	}
-	dev = ndev->priv;
-	dev->ndev = ndev;
-	dev->ldev = &ocpdev->dev;
-	dev->def = ocpdev->def;
-
-	/* Find MAL device we are connected to */
-	maldev =
-	    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx);
-	if (!maldev) {
-		printk(KERN_ERR "emac%d: unknown mal%d device!\n",
-		       dev->def->index, emacdata->mal_idx);
-		err = -ENODEV;
-		goto out;
-	}
-	dev->mal = ocp_get_drvdata(maldev);
-	if (!dev->mal) {
-		printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n",
-		       dev->def->index, emacdata->mal_idx);
-		err = -ENODEV;
-		goto out;
-	}
-
-	/* Register with MAL */
-	dev->commac.ops = &emac_commac_ops;
-	dev->commac.dev = dev;
-	dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan);
-	dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan);
-	err = mal_register_commac(dev->mal, &dev->commac);
-	if (err) {
-		printk(KERN_ERR "emac%d: failed to register with mal%d!\n",
-		       dev->def->index, emacdata->mal_idx);
-		goto out;
-	}
-	dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
-	dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
-
-	/* Get pointers to BD rings */
-	dev->tx_desc =
-	    dev->mal->bd_virt + mal_tx_bd_offset(dev->mal,
-						 emacdata->mal_tx_chan);
-	dev->rx_desc =
-	    dev->mal->bd_virt + mal_rx_bd_offset(dev->mal,
-						 emacdata->mal_rx_chan);
-
-	DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc);
-	DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc);
-
-	/* Clean rings */
-	memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
-	memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
-
-	/* If we depend on another EMAC for MDIO, check whether it was probed already */
-	if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) {
-		struct ocp_device *mdiodev =
-		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC,
-				    emacdata->mdio_idx);
-		if (!mdiodev) {
-			printk(KERN_ERR "emac%d: unknown emac%d device!\n",
-			       dev->def->index, emacdata->mdio_idx);
-			err = -ENODEV;
-			goto out2;
-		}
-		dev->mdio_dev = ocp_get_drvdata(mdiodev);
-		if (!dev->mdio_dev) {
-			printk(KERN_ERR
-			       "emac%d: emac%d hasn't been initialized yet!\n",
-			       dev->def->index, emacdata->mdio_idx);
-			err = -ENODEV;
-			goto out2;
-		}
-	}
-
-	/* Attach to ZMII, if needed */
-	if ((err = zmii_attach(dev)) != 0)
-		goto out2;
-
-	/* Attach to RGMII, if needed */
-	if ((err = rgmii_attach(dev)) != 0)
-		goto out3;
-
-	/* Attach to TAH, if needed */
-	if ((err = tah_attach(dev)) != 0)
-		goto out4;
-
-	/* Map EMAC regs */
-	dev->emacp = ioremap(dev->def->paddr, sizeof(struct emac_regs));
-	if (!dev->emacp) {
-		printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
-		       dev->def->index);
-		err = -ENOMEM;
-		goto out5;
-	}
-
-	/* Fill in MAC address */
-	for (i = 0; i < 6; ++i)
-		ndev->dev_addr[i] = emacdata->mac_addr[i];
-
-	/* Set some link defaults before we can find out real parameters */
-	dev->phy.speed = SPEED_100;
-	dev->phy.duplex = DUPLEX_FULL;
-	dev->phy.autoneg = AUTONEG_DISABLE;
-	dev->phy.pause = dev->phy.asym_pause = 0;
-	dev->stop_timeout = STOP_TIMEOUT_100;
-	init_timer(&dev->link_timer);
-	dev->link_timer.function = emac_link_timer;
-	dev->link_timer.data = (unsigned long)dev;
-
-	/* Find PHY if any */
-	dev->phy.dev = ndev;
-	dev->phy.mode = emacdata->phy_mode;
-	if (emacdata->phy_map != 0xffffffff) {
-		u32 phy_map = emacdata->phy_map | busy_phy_map;
-		u32 adv;
-
-		DBG("%d: PHY maps %08x %08x" NL, dev->def->index,
-		    emacdata->phy_map, busy_phy_map);
-
-		EMAC_RX_CLK_TX(dev->def->index);
-
-		dev->phy.mdio_read = emac_mdio_read;
-		dev->phy.mdio_write = emac_mdio_write;
-
-		/* Configure EMAC with defaults so we can at least use MDIO
-		 * This is needed mostly for 440GX
-		 */
-		if (emac_phy_gpcs(dev->phy.mode)) {
-			/* XXX
-			 * Make GPCS PHY address equal to EMAC index.
-			 * We probably should take into account busy_phy_map
-			 * and/or phy_map here.
-			 */
-			dev->phy.address = dev->def->index;
-		}
-		
-		emac_configure(dev);
-
-		for (i = 0; i < 0x20; phy_map >>= 1, ++i)
-			if (!(phy_map & 1)) {
-				int r;
-				busy_phy_map |= 1 << i;
-
-				/* Quick check if there is a PHY at the address */
-				r = emac_mdio_read(dev->ndev, i, MII_BMCR);
-				if (r == 0xffff || r < 0)
-					continue;
-				if (!mii_phy_probe(&dev->phy, i))
-					break;
-			}
-		if (i == 0x20) {
-			printk(KERN_WARNING "emac%d: can't find PHY!\n",
-			       dev->def->index);
-			goto out6;
-		}
-
-		/* Init PHY */
-		if (dev->phy.def->ops->init)
-			dev->phy.def->ops->init(&dev->phy);
-		
-		/* Disable any PHY features not supported by the platform */
-		dev->phy.def->features &= ~emacdata->phy_feat_exc;
-
-		/* Setup initial link parameters */
-		if (dev->phy.features & SUPPORTED_Autoneg) {
-			adv = dev->phy.features;
-#if !defined(CONFIG_40x)
-			adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-#endif
-			/* Restart autonegotiation */
-			dev->phy.def->ops->setup_aneg(&dev->phy, adv);
-		} else {
-			u32 f = dev->phy.def->features;
-			int speed = SPEED_10, fd = DUPLEX_HALF;
-
-			/* Select highest supported speed/duplex */
-			if (f & SUPPORTED_1000baseT_Full) {
-				speed = SPEED_1000;
-				fd = DUPLEX_FULL;
-			} else if (f & SUPPORTED_1000baseT_Half)
-				speed = SPEED_1000;
-			else if (f & SUPPORTED_100baseT_Full) {
-				speed = SPEED_100;
-				fd = DUPLEX_FULL;
-			} else if (f & SUPPORTED_100baseT_Half)
-				speed = SPEED_100;
-			else if (f & SUPPORTED_10baseT_Full)
-				fd = DUPLEX_FULL;
-
-			/* Force link parameters */
-			dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
-		}
-	} else {
-		emac_reset(dev);
-
-		/* PHY-less configuration.
-		 * XXX I probably should move these settings to emacdata
-		 */
-		dev->phy.address = -1;
-		dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
-		dev->phy.pause = 1;
-	}
-
-	/* Fill in the driver function table */
-	ndev->open = &emac_open;
-	if (dev->tah_dev) {
-		ndev->hard_start_xmit = &emac_start_xmit_sg;
-		ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
-	} else
-		ndev->hard_start_xmit = &emac_start_xmit;
-	ndev->tx_timeout = &emac_full_tx_reset;
-	ndev->watchdog_timeo = 5 * HZ;
-	ndev->stop = &emac_close;
-	ndev->get_stats = &emac_stats;
-	ndev->set_multicast_list = &emac_set_multicast_list;
-	ndev->do_ioctl = &emac_ioctl;
-	if (emac_phy_supports_gige(emacdata->phy_mode)) {
-		ndev->change_mtu = &emac_change_mtu;
-		dev->commac.ops = &emac_commac_sg_ops;
-	}
-	SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
-
-	netif_carrier_off(ndev);
-	netif_stop_queue(ndev);
-
-	err = register_netdev(ndev);
-	if (err) {
-		printk(KERN_ERR "emac%d: failed to register net device (%d)!\n",
-		       dev->def->index, err);
-		goto out6;
-	}
-
-	ocp_set_drvdata(ocpdev, dev);
-
-	printk("%s: emac%d, MAC %s\n",
-	       ndev->name, dev->def->index, print_mac(mac, ndev->dev_addr));
-
-	if (dev->phy.address >= 0)
-		printk("%s: found %s PHY (0x%02x)\n", ndev->name,
-		       dev->phy.def->name, dev->phy.address);
-
-	emac_dbg_register(dev->def->index, dev);
-
-	return 0;
-      out6:
-	iounmap(dev->emacp);
-      out5:
-	tah_fini(dev->tah_dev);
-      out4:
-	rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
-      out3:
-	zmii_fini(dev->zmii_dev, dev->zmii_input);
-      out2:
-	mal_unregister_commac(dev->mal, &dev->commac);
-      out:
-	kfree(ndev);
-	return err;
-}
-
-static struct ocp_device_id emac_ids[] = {
-	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC },
-	{ .vendor = OCP_VENDOR_INVALID}
-};
-
-static struct ocp_driver emac_driver = {
-	.name = "emac",
-	.id_table = emac_ids,
-	.probe = emac_probe,
-	.remove = emac_remove,
-};
-
-static int __init emac_init(void)
-{
-	printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
-
-	DBG(": init" NL);
-
-	if (mal_init())
-		return -ENODEV;
-
-	EMAC_CLK_INTERNAL;
-	if (ocp_register_driver(&emac_driver)) {
-		EMAC_CLK_EXTERNAL;
-		ocp_unregister_driver(&emac_driver);
-		mal_exit();
-		return -ENODEV;
-	}
-	EMAC_CLK_EXTERNAL;
-
-	emac_init_debug();
-	return 0;
-}
-
-static void __exit emac_exit(void)
-{
-	DBG(": exit" NL);
-	ocp_unregister_driver(&emac_driver);
-	mal_exit();
-	emac_fini_debug();
-}
-
-module_init(emac_init);
-module_exit(emac_exit);
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h
deleted file mode 100644
index dabb94afeb9..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_core.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_core.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- *      Armin Kuster <akuster@mvista.com>
- * 	Johnnie Peters <jpeters@mvista.com>
- *      Copyright 2000, 2001 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_CORE_H_
-#define __IBM_EMAC_CORE_H_
-
-#include <linux/netdevice.h>
-#include <linux/dma-mapping.h>
-#include <asm/ocp.h>
-
-#include "ibm_emac.h"
-#include "ibm_emac_phy.h"
-#include "ibm_emac_zmii.h"
-#include "ibm_emac_rgmii.h"
-#include "ibm_emac_mal.h"
-#include "ibm_emac_tah.h"
-
-#define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
-#define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
-
-/* Simple sanity check */
-#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
-#error Invalid number of buffer descriptors (greater than 256)
-#endif
-
-// XXX
-#define EMAC_MIN_MTU			46
-#define EMAC_MAX_MTU			9000
-
-/* Maximum L2 header length (VLAN tagged, no FCS) */
-#define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
-
-/* RX BD size for the given MTU */
-static inline int emac_rx_size(int mtu)
-{
-	if (mtu > ETH_DATA_LEN)
-		return MAL_MAX_RX_SIZE;
-	else
-		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
-}
-
-#define EMAC_DMA_ALIGN(x)		ALIGN((x), dma_get_cache_alignment())
-
-#define EMAC_RX_SKB_HEADROOM		\
-	EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
-
-/* Size of RX skb for the given MTU */
-static inline int emac_rx_skb_size(int mtu)
-{
-	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
-	return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
-}
-
-/* RX DMA sync size */
-static inline int emac_rx_sync_size(int mtu)
-{
-	return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
-}
-
-/* Driver statistcs is split into two parts to make it more cache friendly:
- *   - normal statistics (packet count, etc)
- *   - error statistics
- *
- * When statistics is requested by ethtool, these parts are concatenated,
- * normal one goes first.
- *
- * Please, keep these structures in sync with emac_stats_keys.
- */
-
-/* Normal TX/RX Statistics */
-struct ibm_emac_stats {
-	u64 rx_packets;
-	u64 rx_bytes;
-	u64 tx_packets;
-	u64 tx_bytes;
-	u64 rx_packets_csum;
-	u64 tx_packets_csum;
-};
-
-/* Error statistics */
-struct ibm_emac_error_stats {
-	u64 tx_undo;
-
-	/* Software RX Errors */
-	u64 rx_dropped_stack;
-	u64 rx_dropped_oom;
-	u64 rx_dropped_error;
-	u64 rx_dropped_resize;
-	u64 rx_dropped_mtu;
-	u64 rx_stopped;
-	/* BD reported RX errors */
-	u64 rx_bd_errors;
-	u64 rx_bd_overrun;
-	u64 rx_bd_bad_packet;
-	u64 rx_bd_runt_packet;
-	u64 rx_bd_short_event;
-	u64 rx_bd_alignment_error;
-	u64 rx_bd_bad_fcs;
-	u64 rx_bd_packet_too_long;
-	u64 rx_bd_out_of_range;
-	u64 rx_bd_in_range;
-	/* EMAC IRQ reported RX errors */
-	u64 rx_parity;
-	u64 rx_fifo_overrun;
-	u64 rx_overrun;
-	u64 rx_bad_packet;
-	u64 rx_runt_packet;
-	u64 rx_short_event;
-	u64 rx_alignment_error;
-	u64 rx_bad_fcs;
-	u64 rx_packet_too_long;
-	u64 rx_out_of_range;
-	u64 rx_in_range;
-
-	/* Software TX Errors */
-	u64 tx_dropped;
-	/* BD reported TX errors */
-	u64 tx_bd_errors;
-	u64 tx_bd_bad_fcs;
-	u64 tx_bd_carrier_loss;
-	u64 tx_bd_excessive_deferral;
-	u64 tx_bd_excessive_collisions;
-	u64 tx_bd_late_collision;
-	u64 tx_bd_multple_collisions;
-	u64 tx_bd_single_collision;
-	u64 tx_bd_underrun;
-	u64 tx_bd_sqe;
-	/* EMAC IRQ reported TX errors */
-	u64 tx_parity;
-	u64 tx_underrun;
-	u64 tx_sqe;
-	u64 tx_errors;
-};
-
-#define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct ibm_emac_stats) + \
-					  sizeof(struct ibm_emac_error_stats)) \
-					 / sizeof(u64))
-
-struct ocp_enet_private {
-	struct net_device		*ndev;		/* 0 */
-	struct emac_regs		__iomem *emacp;
-	
-	struct mal_descriptor		*tx_desc;
-	int				tx_cnt;
-	int				tx_slot;
-	int				ack_slot;
-
-	struct mal_descriptor		*rx_desc;
-	int				rx_slot;
-	struct sk_buff			*rx_sg_skb;	/* 1 */
-	int 				rx_skb_size;
-	int				rx_sync_size;
-
-	struct ibm_emac_stats 		stats;
-	struct ocp_device		*tah_dev;
-
-	struct ibm_ocp_mal		*mal;
-	struct mal_commac		commac;
-
-	struct sk_buff			*tx_skb[NUM_TX_BUFF];
-	struct sk_buff			*rx_skb[NUM_RX_BUFF];
-
-	struct ocp_device		*zmii_dev;
-	int				zmii_input;
-	struct ocp_enet_private		*mdio_dev;
-	struct ocp_device		*rgmii_dev;
-	int				rgmii_input;
-
-	struct ocp_def			*def;
-
-	struct mii_phy			phy;
-	struct timer_list		link_timer;
-	int				reset_failed;
-
-	int				stop_timeout;	/* in us */
-
-	struct ibm_emac_error_stats	estats;
-	struct net_device_stats		nstats;
-
-	struct device*			ldev;
-};
-
-/* Ethtool get_regs complex data.
- * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH 
- * when available.
- * 
- * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, 
- * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
- * Each register component is preceded with emac_ethtool_regs_subhdr.
- * Order of the optional headers follows their relative bit posititions 
- * in emac_ethtool_regs_hdr.components
- */
-#define EMAC_ETHTOOL_REGS_ZMII		0x00000001
-#define EMAC_ETHTOOL_REGS_RGMII		0x00000002
-#define EMAC_ETHTOOL_REGS_TAH		0x00000004
-
-struct emac_ethtool_regs_hdr {
-	u32 components;
-};
-
-struct emac_ethtool_regs_subhdr {
-	u32 version;
-	u32 index;
-};
-
-#endif				/* __IBM_EMAC_CORE_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c
deleted file mode 100644
index 1f70906cfb9..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_debug.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_debug.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/sysrq.h>
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-
-static void emac_desc_dump(int idx, struct ocp_enet_private *p)
-{
-	int i;
-	printk("** EMAC%d TX BDs **\n"
-	       " tx_cnt = %d tx_slot = %d ack_slot = %d\n",
-	       idx, p->tx_cnt, p->tx_slot, p->ack_slot);
-	for (i = 0; i < NUM_TX_BUFF / 2; ++i)
-		printk
-		    ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
-		     i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ',
-		     p->tx_desc[i].ctrl, p->tx_desc[i].data_len,
-		     NUM_TX_BUFF / 2 + i,
-		     p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr,
-		     p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ',
-		     p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl,
-		     p->tx_desc[NUM_TX_BUFF / 2 + i].data_len);
-
-	printk("** EMAC%d RX BDs **\n"
-	       " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n"
-	       " rx_sg_skb = 0x%p\n",
-	       idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size,
-	       p->rx_sync_size, p->rx_sg_skb);
-	for (i = 0; i < NUM_RX_BUFF / 2; ++i)
-		printk
-		    ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
-		     i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ',
-		     p->rx_desc[i].ctrl, p->rx_desc[i].data_len,
-		     NUM_RX_BUFF / 2 + i,
-		     p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr,
-		     p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ',
-		     p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl,
-		     p->rx_desc[NUM_RX_BUFF / 2 + i].data_len);
-}
-
-static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
-{
-	struct emac_regs __iomem *p = dev->emacp;
-
-	printk("** EMAC%d registers **\n"
-	       "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
-	       "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
-	       "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n"
-	       "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x "
-	       "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n"
-	       "LSA = %04x%08x IPGVR = 0x%04x\n"
-	       "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n"
-	       "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n",
-	       idx, in_be32(&p->mr0), in_be32(&p->mr1),
-	       in_be32(&p->tmr0), in_be32(&p->tmr1),
-	       in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
-	       in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
-	       in_be32(&p->vtci),
-	       in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3),
-	       in_be32(&p->iaht4),
-	       in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3),
-	       in_be32(&p->gaht4),
-	       in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr),
-	       in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr),
-	       in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr)
-	    );
-
-	emac_desc_dump(idx, dev);
-}
-
-static void emac_mal_dump(struct ibm_ocp_mal *mal)
-{
-	struct ocp_func_mal_data *maldata = mal->def->additions;
-	int i;
-
-	printk("** MAL%d Registers **\n"
-	       "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
-	       "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
-	       "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
-	       mal->def->index,
-	       get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
-	       get_mal_dcrn(mal, MAL_IER),
-	       get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
-	       get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR),
-	       get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR),
-	       get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR)
-	    );
-
-	printk("TX|");
-	for (i = 0; i < maldata->num_tx_chans; ++i) {
-		if (i && !(i % 4))
-			printk("\n   ");
-		printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i)));
-	}
-	printk("\nRX|");
-	for (i = 0; i < maldata->num_rx_chans; ++i) {
-		if (i && !(i % 4))
-			printk("\n   ");
-		printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i)));
-	}
-	printk("\n   ");
-	for (i = 0; i < maldata->num_rx_chans; ++i) {
-		u32 r = get_mal_dcrn(mal, MAL_RCBS(i));
-		if (i && !(i % 3))
-			printk("\n   ");
-		printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16);
-	}
-	printk("\n");
-}
-
-static struct ocp_enet_private *__emacs[4];
-static struct ibm_ocp_mal *__mals[1];
-
-void emac_dbg_register(int idx, struct ocp_enet_private *dev)
-{
-	unsigned long flags;
-
-	if (idx >= ARRAY_SIZE(__emacs)) {
-		printk(KERN_WARNING
-		       "invalid index %d when registering EMAC for debugging\n",
-		       idx);
-		return;
-	}
-
-	local_irq_save(flags);
-	__emacs[idx] = dev;
-	local_irq_restore(flags);
-}
-
-void mal_dbg_register(int idx, struct ibm_ocp_mal *mal)
-{
-	unsigned long flags;
-
-	if (idx >= ARRAY_SIZE(__mals)) {
-		printk(KERN_WARNING
-		       "invalid index %d when registering MAL for debugging\n",
-		       idx);
-		return;
-	}
-
-	local_irq_save(flags);
-	__mals[idx] = mal;
-	local_irq_restore(flags);
-}
-
-void emac_dbg_dump_all(void)
-{
-	unsigned int i;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	for (i = 0; i < ARRAY_SIZE(__mals); ++i)
-		if (__mals[i])
-			emac_mal_dump(__mals[i]);
-
-	for (i = 0; i < ARRAY_SIZE(__emacs); ++i)
-		if (__emacs[i])
-			emac_mac_dump(i, __emacs[i]);
-
-	local_irq_restore(flags);
-}
-
-#if defined(CONFIG_MAGIC_SYSRQ)
-static void emac_sysrq_handler(int key, struct tty_struct *tty)
-{
-	emac_dbg_dump_all();
-}
-
-static struct sysrq_key_op emac_sysrq_op = {
-	.handler = emac_sysrq_handler,
-	.help_msg = "emaC",
-	.action_msg = "Show EMAC(s) status",
-};
-
-int __init emac_init_debug(void)
-{
-	return register_sysrq_key('c', &emac_sysrq_op);
-}
-
-void __exit emac_fini_debug(void)
-{
-	unregister_sysrq_key('c', &emac_sysrq_op);
-}
-
-#else
-int __init emac_init_debug(void)
-{
-	return 0;
-}
-void __exit emac_fini_debug(void)
-{
-}
-#endif				/* CONFIG_MAGIC_SYSRQ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h
deleted file mode 100644
index 6c7dccc84bf..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_debug.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_debug.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_DEBUG_H_
-#define __IBM_EMAC_DEBUG_H_
-
-#include <linux/init.h>
-#include "ibm_emac_core.h"
-#include "ibm_emac_mal.h"
-
-#if defined(CONFIG_IBM_EMAC_DEBUG)
-void emac_dbg_register(int idx, struct ocp_enet_private *dev);
-void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
-int emac_init_debug(void) __init;
-void emac_fini_debug(void) __exit;
-void emac_dbg_dump_all(void);
-# define DBG_LEVEL		1
-#else
-# define emac_dbg_register(x,y) ((void)0)
-# define mal_dbg_register(x,y)	((void)0)
-# define emac_init_debug()	((void)0)
-# define emac_fini_debug()	((void)0)
-# define emac_dbg_dump_all()	((void)0)
-# define DBG_LEVEL		0
-#endif
-
-#if DBG_LEVEL > 0
-#  define DBG(f,x...)		printk("emac" f, ##x)
-#  define MAL_DBG(f,x...)	printk("mal" f, ##x)
-#  define ZMII_DBG(f,x...)	printk("zmii" f, ##x)
-#  define RGMII_DBG(f,x...)	printk("rgmii" f, ##x)
-#  define NL			"\n"
-#else
-#  define DBG(f,x...)		((void)0)
-#  define MAL_DBG(f,x...)	((void)0)
-#  define ZMII_DBG(f,x...)	((void)0)
-#  define RGMII_DBG(f,x...)	((void)0)
-#endif
-#if DBG_LEVEL > 1
-#  define DBG2(f,x...) 		DBG(f, ##x)
-#  define MAL_DBG2(f,x...) 	MAL_DBG(f, ##x)
-#  define ZMII_DBG2(f,x...) 	ZMII_DBG(f, ##x)
-#  define RGMII_DBG2(f,x...) 	RGMII_DBG(f, ##x)
-#else
-#  define DBG2(f,x...) 		((void)0)
-#  define MAL_DBG2(f,x...) 	((void)0)
-#  define ZMII_DBG2(f,x...) 	((void)0)
-#  define RGMII_DBG2(f,x...) 	((void)0)
-#endif
-
-#endif				/* __IBM_EMAC_DEBUG_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c
deleted file mode 100644
index dcd8826fc74..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_mal.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_mal.c
- *
- * Memory Access Layer (MAL) support
- * 
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- *      Benjamin Herrenschmidt <benh@kernel.crashing.org>,
- *      David Gibson <hermes@gibson.dropbear.id.au>,
- *
- *      Armin Kuster <akuster@mvista.com>
- *      Copyright 2002 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/ocp.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_mal.h"
-#include "ibm_emac_debug.h"
-
-int __init mal_register_commac(struct ibm_ocp_mal *mal,
-			       struct mal_commac *commac)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-
-	MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index,
-		commac->tx_chan_mask, commac->rx_chan_mask);
-
-	/* Don't let multiple commacs claim the same channel(s) */
-	if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
-	    (mal->rx_chan_mask & commac->rx_chan_mask)) {
-		local_irq_restore(flags);
-		printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
-		       mal->def->index);
-		return -EBUSY;
-	}
-
-	mal->tx_chan_mask |= commac->tx_chan_mask;
-	mal->rx_chan_mask |= commac->rx_chan_mask;
-	list_add(&commac->list, &mal->list);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-
-	MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index,
-		commac->tx_chan_mask, commac->rx_chan_mask);
-
-	mal->tx_chan_mask &= ~commac->tx_chan_mask;
-	mal->rx_chan_mask &= ~commac->rx_chan_mask;
-	list_del_init(&commac->list);
-
-	local_irq_restore(flags);
-}
-
-int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
-{
-	struct ocp_func_mal_data *maldata = mal->def->additions;
-	BUG_ON(channel < 0 || channel >= maldata->num_rx_chans ||
-	       size > MAL_MAX_RX_SIZE);
-
-	MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size);
-
-	if (size & 0xf) {
-		printk(KERN_WARNING
-		       "mal%d: incorrect RX size %lu for the channel %d\n",
-		       mal->def->index, size, channel);
-		return -EINVAL;
-	}
-
-	set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4);
-	return 0;
-}
-
-int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel)
-{
-	struct ocp_func_mal_data *maldata = mal->def->additions;
-	BUG_ON(channel < 0 || channel >= maldata->num_tx_chans);
-	return channel * NUM_TX_BUFF;
-}
-
-int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel)
-{
-	struct ocp_func_mal_data *maldata = mal->def->additions;
-	BUG_ON(channel < 0 || channel >= maldata->num_rx_chans);
-	return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF;
-}
-
-void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel)
-{
-	local_bh_disable();
-	MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel);
-	set_mal_dcrn(mal, MAL_TXCASR,
-		     get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel));
-	local_bh_enable();
-}
-
-void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel)
-{
-	set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel));
-	MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel);
-}
-
-void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel)
-{
-	local_bh_disable();
-	MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel);
-	set_mal_dcrn(mal, MAL_RXCASR,
-		     get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel));
-	local_bh_enable();
-}
-
-void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel)
-{
-	set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
-	MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel);
-}
-
-void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac)
-{
-	local_bh_disable();
-	MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac);
-	list_add_tail(&commac->poll_list, &mal->poll_list);
-	local_bh_enable();
-}
-
-void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac)
-{
-	local_bh_disable();
-	MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac);
-	list_del(&commac->poll_list);
-	local_bh_enable();
-}
-
-/* synchronized by mal_poll() */
-static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal)
-{
-	MAL_DBG2("%d: enable_irq" NL, mal->def->index);
-	set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
-}
-
-/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
-static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal)
-{
-	set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE);
-	MAL_DBG2("%d: disable_irq" NL, mal->def->index);
-}
-
-static irqreturn_t mal_serr(int irq, void *dev_instance)
-{
-	struct ibm_ocp_mal *mal = dev_instance;
-	u32 esr = get_mal_dcrn(mal, MAL_ESR);
-
-	/* Clear the error status register */
-	set_mal_dcrn(mal, MAL_ESR, esr);
-
-	MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr);
-
-	if (esr & MAL_ESR_EVB) {
-		if (esr & MAL_ESR_DE) {
-			/* We ignore Descriptor error,
-			 * TXDE or RXDE interrupt will be generated anyway.
-			 */
-			return IRQ_HANDLED;
-		}
-
-		if (esr & MAL_ESR_PEIN) {
-			/* PLB error, it's probably buggy hardware or
-			 * incorrect physical address in BD (i.e. bug)
-			 */
-			if (net_ratelimit())
-				printk(KERN_ERR
-				       "mal%d: system error, PLB (ESR = 0x%08x)\n",
-				       mal->def->index, esr);
-			return IRQ_HANDLED;
-		}
-
-		/* OPB error, it's probably buggy hardware or incorrect EBC setup */
-		if (net_ratelimit())
-			printk(KERN_ERR
-			       "mal%d: system error, OPB (ESR = 0x%08x)\n",
-			       mal->def->index, esr);
-	}
-	return IRQ_HANDLED;
-}
-
-static inline void mal_schedule_poll(struct ibm_ocp_mal *mal)
-{
-	if (likely(napi_schedule_prep(&mal->napi))) {
-		MAL_DBG2("%d: schedule_poll" NL, mal->def->index);
-		mal_disable_eob_irq(mal);
-		__napi_schedule(&mal->napi);
-	} else
-		MAL_DBG2("%d: already in poll" NL, mal->def->index);
-}
-
-static irqreturn_t mal_txeob(int irq, void *dev_instance)
-{
-	struct ibm_ocp_mal *mal = dev_instance;
-	u32 r = get_mal_dcrn(mal, MAL_TXEOBISR);
-	MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r);
-	mal_schedule_poll(mal);
-	set_mal_dcrn(mal, MAL_TXEOBISR, r);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t mal_rxeob(int irq, void *dev_instance)
-{
-	struct ibm_ocp_mal *mal = dev_instance;
-	u32 r = get_mal_dcrn(mal, MAL_RXEOBISR);
-	MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r);
-	mal_schedule_poll(mal);
-	set_mal_dcrn(mal, MAL_RXEOBISR, r);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t mal_txde(int irq, void *dev_instance)
-{
-	struct ibm_ocp_mal *mal = dev_instance;
-	u32 deir = get_mal_dcrn(mal, MAL_TXDEIR);
-	set_mal_dcrn(mal, MAL_TXDEIR, deir);
-
-	MAL_DBG("%d: txde %08x" NL, mal->def->index, deir);
-
-	if (net_ratelimit())
-		printk(KERN_ERR
-		       "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n",
-		       mal->def->index, deir);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t mal_rxde(int irq, void *dev_instance)
-{
-	struct ibm_ocp_mal *mal = dev_instance;
-	struct list_head *l;
-	u32 deir = get_mal_dcrn(mal, MAL_RXDEIR);
-
-	MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir);
-
-	list_for_each(l, &mal->list) {
-		struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-		if (deir & mc->rx_chan_mask) {
-			mc->rx_stopped = 1;
-			mc->ops->rxde(mc->dev);
-		}
-	}
-
-	mal_schedule_poll(mal);
-	set_mal_dcrn(mal, MAL_RXDEIR, deir);
-
-	return IRQ_HANDLED;
-}
-
-static int mal_poll(struct napi_struct *napi, int budget)
-{
-	struct ibm_ocp_mal *mal = container_of(napi, struct ibm_ocp_mal, napi);
-	struct list_head *l;
-	int received = 0;
-
-	MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget,
-		 rx_work_limit);
-      again:
-	/* Process TX skbs */
-	list_for_each(l, &mal->poll_list) {
-		struct mal_commac *mc =
-		    list_entry(l, struct mal_commac, poll_list);
-		mc->ops->poll_tx(mc->dev);
-	}
-
-	/* Process RX skbs.
-	 * We _might_ need something more smart here to enforce polling fairness.
-	 */
-	list_for_each(l, &mal->poll_list) {
-		struct mal_commac *mc =
-		    list_entry(l, struct mal_commac, poll_list);
-		int n = mc->ops->poll_rx(mc->dev, budget);
-		if (n) {
-			received += n;
-			budget -= n;
-			if (budget <= 0)
-				goto more_work;	// XXX What if this is the last one ?
-		}
-	}
-
-	/* We need to disable IRQs to protect from RXDE IRQ here */
-	local_irq_disable();
-	__napi_complete(napi);
-	mal_enable_eob_irq(mal);
-	local_irq_enable();
-
-	/* Check for "rotting" packet(s) */
-	list_for_each(l, &mal->poll_list) {
-		struct mal_commac *mc =
-		    list_entry(l, struct mal_commac, poll_list);
-		if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) {
-			MAL_DBG2("%d: rotting packet" NL, mal->def->index);
-			if (napi_reschedule(napi))
-				mal_disable_eob_irq(mal);
-			else
-				MAL_DBG2("%d: already in poll list" NL,
-					 mal->def->index);
-
-			if (budget > 0)
-				goto again;
-			else
-				goto more_work;
-		}
-		mc->ops->poll_tx(mc->dev);
-	}
-
-      more_work:
-	MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, budget, received);
-	return received;
-}
-
-static void mal_reset(struct ibm_ocp_mal *mal)
-{
-	int n = 10;
-	MAL_DBG("%d: reset" NL, mal->def->index);
-
-	set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR);
-
-	/* Wait for reset to complete (1 system clock) */
-	while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n)
-		--n;
-
-	if (unlikely(!n))
-		printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index);
-}
-
-int mal_get_regs_len(struct ibm_ocp_mal *mal)
-{
-	return sizeof(struct emac_ethtool_regs_subhdr) +
-	    sizeof(struct ibm_mal_regs);
-}
-
-void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf)
-{
-	struct emac_ethtool_regs_subhdr *hdr = buf;
-	struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1);
-	struct ocp_func_mal_data *maldata = mal->def->additions;
-	int i;
-
-	hdr->version = MAL_VERSION;
-	hdr->index = mal->def->index;
-
-	regs->tx_count = maldata->num_tx_chans;
-	regs->rx_count = maldata->num_rx_chans;
-
-	regs->cfg = get_mal_dcrn(mal, MAL_CFG);
-	regs->esr = get_mal_dcrn(mal, MAL_ESR);
-	regs->ier = get_mal_dcrn(mal, MAL_IER);
-	regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR);
-	regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR);
-	regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR);
-	regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR);
-	regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR);
-	regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR);
-	regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR);
-	regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR);
-
-	for (i = 0; i < regs->tx_count; ++i)
-		regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i));
-
-	for (i = 0; i < regs->rx_count; ++i) {
-		regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i));
-		regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i));
-	}
-	return regs + 1;
-}
-
-static int __init mal_probe(struct ocp_device *ocpdev)
-{
-	struct ibm_ocp_mal *mal;
-	struct ocp_func_mal_data *maldata;
-	int err = 0, i, bd_size;
-
-	MAL_DBG("%d: probe" NL, ocpdev->def->index);
-
-	maldata = ocpdev->def->additions;
-	if (maldata == NULL) {
-		printk(KERN_ERR "mal%d: missing additional data!\n",
-		       ocpdev->def->index);
-		return -ENODEV;
-	}
-
-	mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
-	if (!mal) {
-		printk(KERN_ERR
-		       "mal%d: out of memory allocating MAL structure!\n",
-		       ocpdev->def->index);
-		return -ENOMEM;
-	}
-
-	/* XXX This only works for native dcr for now */
-	mal->dcrhost = dcr_map(NULL, maldata->dcr_base, 0);
-
-	mal->def = ocpdev->def;
-
-	INIT_LIST_HEAD(&mal->poll_list);
-	mal->napi.weight = CONFIG_IBM_EMAC_POLL_WEIGHT;
-	mal->napi.poll = mal_poll;
-
-	INIT_LIST_HEAD(&mal->list);
-
-	/* Load power-on reset defaults */
-	mal_reset(mal);
-
-	/* Set the MAL configuration register */
-	set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB |
-		     MAL_CFG_OPBBL | MAL_CFG_LEA);
-
-	mal_enable_eob_irq(mal);
-
-	/* Allocate space for BD rings */
-	BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32);
-	BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32);
-	bd_size = sizeof(struct mal_descriptor) *
-	    (NUM_TX_BUFF * maldata->num_tx_chans +
-	     NUM_RX_BUFF * maldata->num_rx_chans);
-	mal->bd_virt =
-	    dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL);
-
-	if (!mal->bd_virt) {
-		printk(KERN_ERR
-		       "mal%d: out of memory allocating RX/TX descriptors!\n",
-		       mal->def->index);
-		err = -ENOMEM;
-		goto fail;
-	}
-	memset(mal->bd_virt, 0, bd_size);
-
-	for (i = 0; i < maldata->num_tx_chans; ++i)
-		set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma +
-			     sizeof(struct mal_descriptor) *
-			     mal_tx_bd_offset(mal, i));
-
-	for (i = 0; i < maldata->num_rx_chans; ++i)
-		set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma +
-			     sizeof(struct mal_descriptor) *
-			     mal_rx_bd_offset(mal, i));
-
-	err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
-	if (err)
-		goto fail2;
-	err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal);
-	if (err)
-		goto fail3;
-	err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
-	if (err)
-		goto fail4;
-	err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
-	if (err)
-		goto fail5;
-	err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
-	if (err)
-		goto fail6;
-
-	/* Enable all MAL SERR interrupt sources */
-	set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
-
-	/* Advertise this instance to the rest of the world */
-	ocp_set_drvdata(ocpdev, mal);
-
-	mal_dbg_register(mal->def->index, mal);
-
-	printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n",
-	       mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans);
-	return 0;
-
-      fail6:
-	free_irq(maldata->rxde_irq, mal);
-      fail5:
-	free_irq(maldata->txeob_irq, mal);
-      fail4:
-	free_irq(maldata->txde_irq, mal);
-      fail3:
-	free_irq(maldata->serr_irq, mal);
-      fail2:
-	dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
-      fail:
-	kfree(mal);
-	return err;
-}
-
-static void __exit mal_remove(struct ocp_device *ocpdev)
-{
-	struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
-	struct ocp_func_mal_data *maldata = mal->def->additions;
-
-	MAL_DBG("%d: remove" NL, mal->def->index);
-
-	/* Synchronize with scheduled polling */
-	napi_disable(&mal->napi);
-
-	if (!list_empty(&mal->list)) {
-		/* This is *very* bad */
-		printk(KERN_EMERG
-		       "mal%d: commac list is not empty on remove!\n",
-		       mal->def->index);
-	}
-
-	ocp_set_drvdata(ocpdev, NULL);
-
-	free_irq(maldata->serr_irq, mal);
-	free_irq(maldata->txde_irq, mal);
-	free_irq(maldata->txeob_irq, mal);
-	free_irq(maldata->rxde_irq, mal);
-	free_irq(maldata->rxeob_irq, mal);
-
-	mal_reset(mal);
-
-	mal_dbg_register(mal->def->index, NULL);
-
-	dma_free_coherent(&ocpdev->dev,
-			  sizeof(struct mal_descriptor) *
-			  (NUM_TX_BUFF * maldata->num_tx_chans +
-			   NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt,
-			  mal->bd_dma);
-
-	kfree(mal);
-}
-
-/* Structure for a device driver */
-static struct ocp_device_id mal_ids[] = {
-	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL },
-	{ .vendor = OCP_VENDOR_INVALID}
-};
-
-static struct ocp_driver mal_driver = {
-	.name = "mal",
-	.id_table = mal_ids,
-
-	.probe = mal_probe,
-	.remove = mal_remove,
-};
-
-int __init mal_init(void)
-{
-	MAL_DBG(": init" NL);
-	return ocp_register_driver(&mal_driver);
-}
-
-void __exit mal_exit(void)
-{
-	MAL_DBG(": exit" NL);
-	ocp_unregister_driver(&mal_driver);
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
deleted file mode 100644
index b8adbe6d4b0..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_mal.h
- *
- * Memory Access Layer (MAL) support
- * 
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- *      Armin Kuster <akuster@mvista.com>
- *      Copyright 2002 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifndef __IBM_EMAC_MAL_H_
-#define __IBM_EMAC_MAL_H_
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-
-#include <asm/io.h>
-#include <asm/dcr.h>
-
-/*
- * These MAL "versions" probably aren't the real versions IBM uses for these 
- * MAL cores, I assigned them just to make #ifdefs in this file nicer and 
- * reflect the fact that 40x and 44x have slightly different MALs. --ebs
- */
-#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
-    defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H)
-#define MAL_VERSION		1
-#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
-      defined(CONFIG_440SPE)
-#define MAL_VERSION		2
-#else
-#error "Unknown SoC, please check chip manual and choose MAL 'version'"
-#endif
-
-/* MALx DCR registers */
-#define	MAL_CFG			0x00
-#define	  MAL_CFG_SR		0x80000000
-#define   MAL_CFG_PLBB		0x00004000
-#define   MAL_CFG_OPBBL		0x00000080
-#define   MAL_CFG_EOPIE		0x00000004
-#define   MAL_CFG_LEA		0x00000002
-#define   MAL_CFG_SD		0x00000001
-#if MAL_VERSION == 1
-#define   MAL_CFG_PLBP_MASK	0x00c00000
-#define   MAL_CFG_PLBP_10	0x00800000
-#define   MAL_CFG_GA		0x00200000
-#define   MAL_CFG_OA		0x00100000
-#define   MAL_CFG_PLBLE		0x00080000
-#define   MAL_CFG_PLBT_MASK	0x00078000
-#define   MAL_CFG_DEFAULT	(MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK)
-#elif MAL_VERSION == 2
-#define   MAL_CFG_RPP_MASK	0x00c00000
-#define   MAL_CFG_RPP_10	0x00800000
-#define   MAL_CFG_RMBS_MASK	0x00300000
-#define   MAL_CFG_WPP_MASK	0x000c0000
-#define   MAL_CFG_WPP_10	0x00080000
-#define   MAL_CFG_WMBS_MASK	0x00030000
-#define   MAL_CFG_PLBLE		0x00008000
-#define   MAL_CFG_DEFAULT	(MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \
-				 MAL_CFG_RPP_10 | MAL_CFG_WPP_10)
-#else
-#error "Unknown MAL version"
-#endif
-
-#define MAL_ESR			0x01
-#define   MAL_ESR_EVB		0x80000000
-#define   MAL_ESR_CIDT		0x40000000
-#define   MAL_ESR_CID_MASK	0x3e000000
-#define   MAL_ESR_CID_SHIFT	25
-#define   MAL_ESR_DE		0x00100000
-#define   MAL_ESR_OTE		0x00040000
-#define   MAL_ESR_OSE		0x00020000
-#define   MAL_ESR_PEIN		0x00010000
-#define   MAL_ESR_DEI		0x00000010
-#define   MAL_ESR_OTEI		0x00000004
-#define   MAL_ESR_OSEI		0x00000002
-#define   MAL_ESR_PBEI		0x00000001
-#if MAL_VERSION == 1
-#define   MAL_ESR_ONE		0x00080000
-#define   MAL_ESR_ONEI		0x00000008
-#elif MAL_VERSION == 2
-#define   MAL_ESR_PTE		0x00800000
-#define   MAL_ESR_PRE		0x00400000
-#define   MAL_ESR_PWE		0x00200000
-#define   MAL_ESR_PTEI		0x00000080
-#define   MAL_ESR_PREI		0x00000040
-#define   MAL_ESR_PWEI		0x00000020
-#else
-#error "Unknown MAL version"
-#endif
-
-#define MAL_IER			0x02
-#define   MAL_IER_DE		0x00000010
-#define   MAL_IER_OTE		0x00000004
-#define   MAL_IER_OE		0x00000002
-#define   MAL_IER_PE		0x00000001
-#if MAL_VERSION == 1
-#define   MAL_IER_NWE		0x00000008
-#define   MAL_IER_SOC_EVENTS	MAL_IER_NWE
-#elif MAL_VERSION == 2
-#define   MAL_IER_PT		0x00000080
-#define   MAL_IER_PRE		0x00000040
-#define   MAL_IER_PWE		0x00000020
-#define   MAL_IER_SOC_EVENTS	(MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE)
-#else
-#error "Unknown MAL version"
-#endif
-#define   MAL_IER_EVENTS	(MAL_IER_SOC_EVENTS | MAL_IER_OTE | \
-				 MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE)
-
-#define MAL_TXCASR		0x04
-#define MAL_TXCARR		0x05
-#define MAL_TXEOBISR		0x06
-#define MAL_TXDEIR		0x07
-#define MAL_RXCASR		0x10
-#define MAL_RXCARR		0x11
-#define MAL_RXEOBISR		0x12
-#define MAL_RXDEIR		0x13
-#define MAL_TXCTPR(n)		((n) + 0x20)
-#define MAL_RXCTPR(n)		((n) + 0x40)
-#define MAL_RCBS(n)		((n) + 0x60)
-
-/* In reality MAL can handle TX buffers up to 4095 bytes long, 
- * but this isn't a good round number :) 		 --ebs
- */
-#define MAL_MAX_TX_SIZE		4080
-#define MAL_MAX_RX_SIZE		4080
-
-static inline int mal_rx_size(int len)
-{
-	len = (len + 0xf) & ~0xf;
-	return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len;
-}
-
-static inline int mal_tx_chunks(int len)
-{
-	return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE;
-}
-
-#define MAL_CHAN_MASK(n)	(0x80000000 >> (n))
-
-/* MAL Buffer Descriptor structure */
-struct mal_descriptor {
-	u16 ctrl;		/* MAL / Commac status control bits */
-	u16 data_len;		/* Max length is 4K-1 (12 bits)     */
-	u32 data_ptr;		/* pointer to actual data buffer    */
-};
-
-/* the following defines are for the MadMAL status and control registers. */
-/* MADMAL transmit and receive status/control bits  */
-#define MAL_RX_CTRL_EMPTY	0x8000
-#define MAL_RX_CTRL_WRAP	0x4000
-#define MAL_RX_CTRL_CM		0x2000
-#define MAL_RX_CTRL_LAST	0x1000
-#define MAL_RX_CTRL_FIRST	0x0800
-#define MAL_RX_CTRL_INTR	0x0400
-#define MAL_RX_CTRL_SINGLE	(MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST)
-#define MAL_IS_SINGLE_RX(ctrl)	(((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE)
-
-#define MAL_TX_CTRL_READY	0x8000
-#define MAL_TX_CTRL_WRAP	0x4000
-#define MAL_TX_CTRL_CM		0x2000
-#define MAL_TX_CTRL_LAST	0x1000
-#define MAL_TX_CTRL_INTR	0x0400
-
-struct mal_commac_ops {
-	void	(*poll_tx) (void *dev);
-	int	(*poll_rx) (void *dev, int budget);
-	int	(*peek_rx) (void *dev);
-	void	(*rxde) (void *dev);
-};
-
-struct mal_commac {
-	struct mal_commac_ops	*ops;
-	void			*dev;
-	struct list_head	poll_list;
-	int			rx_stopped;
-
-	u32			tx_chan_mask;
-	u32			rx_chan_mask;
-	struct list_head	list;
-};
-
-struct ibm_ocp_mal {
-	dcr_host_t		dcrhost;
-
-	struct list_head	poll_list;
-	struct napi_struct	napi;
-
-	struct list_head	list;
-	u32			tx_chan_mask;
-	u32			rx_chan_mask;
-
-	dma_addr_t		bd_dma;
-	struct mal_descriptor	*bd_virt;
-
-	struct ocp_def		*def;
-};
-
-static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg)
-{
-	return dcr_read(mal->dcrhost, reg);
-}
-
-static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val)
-{
-	dcr_write(mal->dcrhost, reg, val);
-}
-
-/* Register MAL devices */
-int mal_init(void) __init;
-void mal_exit(void) __exit;
-
-int mal_register_commac(struct ibm_ocp_mal *mal,
-			struct mal_commac *commac) __init;
-void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac);
-int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size);
-
-/* Returns BD ring offset for a particular channel
-   (in 'struct mal_descriptor' elements)
-*/
-int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel);
-int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel);
-
-void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel);
-void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel);
-void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel);
-void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel);
-
-/* Add/remove EMAC to/from MAL polling list */
-void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac);
-void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac);
-
-/* Ethtool MAL registers */
-struct ibm_mal_regs {
-	u32 tx_count;
-	u32 rx_count;
-
-	u32 cfg;
-	u32 esr;
-	u32 ier;
-	u32 tx_casr;
-	u32 tx_carr;
-	u32 tx_eobisr;
-	u32 tx_deir;
-	u32 rx_casr;
-	u32 rx_carr;
-	u32 rx_eobisr;
-	u32 rx_deir;
-	u32 tx_ctpr[32];
-	u32 rx_ctpr[32];
-	u32 rcbs[32];
-};
-
-int mal_get_regs_len(struct ibm_ocp_mal *mal);
-void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf);
-
-#endif				/* __IBM_EMAC_MAL_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
deleted file mode 100644
index e57862b34ca..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_phy.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_phy.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
- * Borrowed from sungem_phy.c, though I only kept the generic MII
- * driver for now.
- * 
- * This file should be shared with other drivers or eventually
- * merged as the "low level" part of miilib
- * 
- * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
- * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-
-#include <asm/ocp.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_phy.h"
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
-	return phy->mdio_read(phy->dev, phy->address, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
-	phy->mdio_write(phy->dev, phy->address, reg, val);
-}
-
-/*
- * polls MII_BMCR until BMCR_RESET bit clears or operation times out.
- *
- * returns:
- *	>= 0 => success, value in BMCR returned to caller
- *	-EBUSY => failure, RESET bit never cleared
- *	otherwise => failure, lower level PHY read failed
- */
-static int mii_spin_reset_complete(struct mii_phy *phy)
-{
-	int val;
-	int limit = 10000;
-
-	while (limit--) {
-		val = phy_read(phy, MII_BMCR);
-		if (val >= 0 && !(val & BMCR_RESET))
-			return val;	/* success */
-		udelay(10);
-	}
-	if (val & BMCR_RESET)
-		val = -EBUSY;
-
-	if (net_ratelimit())
-		printk(KERN_ERR "emac%d: PHY reset timeout (%d)\n", 
-		       ((struct ocp_enet_private *)phy->dev->priv)->def->index,
-		       val);
-	return val;		    
-}
-
-int mii_reset_phy(struct mii_phy *phy)
-{
-	int val;
-
-	val = phy_read(phy, MII_BMCR);
-	val &= ~BMCR_ISOLATE;
-	val |= BMCR_RESET;
-	phy_write(phy, MII_BMCR, val);
-
-	udelay(300);
-
-	val = mii_spin_reset_complete(phy);
-	if (val >= 0 && (val & BMCR_ISOLATE))
-		phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
-
-	return val < 0;
-}
-
-static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
-	int ctl, adv;
-
-	phy->autoneg = AUTONEG_ENABLE;
-	phy->speed = SPEED_10;
-	phy->duplex = DUPLEX_HALF;
-	phy->pause = phy->asym_pause = 0;
-	phy->advertising = advertise;
-
-	/* Setup standard advertise */
-	adv = phy_read(phy, MII_ADVERTISE);
-	if (adv < 0)
-		return adv;
-	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
-		 ADVERTISE_PAUSE_ASYM);
-	if (advertise & ADVERTISED_10baseT_Half)
-		adv |= ADVERTISE_10HALF;
-	if (advertise & ADVERTISED_10baseT_Full)
-		adv |= ADVERTISE_10FULL;
-	if (advertise & ADVERTISED_100baseT_Half)
-		adv |= ADVERTISE_100HALF;
-	if (advertise & ADVERTISED_100baseT_Full)
-		adv |= ADVERTISE_100FULL;
-	if (advertise & ADVERTISED_Pause)
-		adv |= ADVERTISE_PAUSE_CAP;
-	if (advertise & ADVERTISED_Asym_Pause)
-		adv |= ADVERTISE_PAUSE_ASYM;
-	phy_write(phy, MII_ADVERTISE, adv);
-
-	if (phy->features &
-	    (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
-		adv = phy_read(phy, MII_CTRL1000);
-		if (adv < 0)
-			return adv;
-		adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
-		if (advertise & ADVERTISED_1000baseT_Full)
-			adv |= ADVERTISE_1000FULL;
-		if (advertise & ADVERTISED_1000baseT_Half)
-			adv |= ADVERTISE_1000HALF;
-		phy_write(phy, MII_CTRL1000, adv);
-	}
-
-	/* Start/Restart aneg */
-	/* on some PHYs (e.g. National DP83843) a write to MII_ADVERTISE
-	 * causes BMCR_RESET to be set on the next read of MII_BMCR, which
-	 * if not checked for causes the PHY to be reset below */
-	ctl = mii_spin_reset_complete(phy);
-	if (ctl < 0)
-		return ctl;
-
-	ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
-	phy_write(phy, MII_BMCR, ctl);
-
-	return 0;
-}
-
-static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
-	int ctl;
-
-	phy->autoneg = AUTONEG_DISABLE;
-	phy->speed = speed;
-	phy->duplex = fd;
-	phy->pause = phy->asym_pause = 0;
-
-	/* First reset the PHY */
-	mii_reset_phy(phy);
-
-	ctl = phy_read(phy, MII_BMCR);
-	if (ctl < 0)
-		return ctl;
-	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE | BMCR_SPEED1000);
-
-	/* Select speed & duplex */
-	switch (speed) {
-	case SPEED_10:
-		break;
-	case SPEED_100:
-		ctl |= BMCR_SPEED100;
-		break;
-	case SPEED_1000:
-		ctl |= BMCR_SPEED1000;
-		break;
-	default:
-		return -EINVAL;
-	}
-	if (fd == DUPLEX_FULL)
-		ctl |= BMCR_FULLDPLX;
-	phy_write(phy, MII_BMCR, ctl);
-
-	return 0;
-}
-
-static int genmii_poll_link(struct mii_phy *phy)
-{
-	int status;
-
-	/* Clear latched value with dummy read */
-	phy_read(phy, MII_BMSR);
-	status = phy_read(phy, MII_BMSR);
-	if (status < 0 || (status & BMSR_LSTATUS) == 0)
-		return 0;
-	if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
-		return 0;
-	return 1;
-}
-
-static int genmii_read_link(struct mii_phy *phy)
-{
-	if (phy->autoneg == AUTONEG_ENABLE) {
-		int glpa = 0;
-		int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
-		if (lpa < 0)
-			return lpa;
-
-		if (phy->features &
-		    (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
-			int adv = phy_read(phy, MII_CTRL1000);
-			glpa = phy_read(phy, MII_STAT1000);
-
-			if (glpa < 0 || adv < 0)
-				return adv;
-
-			glpa &= adv << 2;
-		}
-
-		phy->speed = SPEED_10;
-		phy->duplex = DUPLEX_HALF;
-		phy->pause = phy->asym_pause = 0;
-
-		if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
-			phy->speed = SPEED_1000;
-			if (glpa & LPA_1000FULL)
-				phy->duplex = DUPLEX_FULL;
-		} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
-			phy->speed = SPEED_100;
-			if (lpa & LPA_100FULL)
-				phy->duplex = DUPLEX_FULL;
-		} else if (lpa & LPA_10FULL)
-			phy->duplex = DUPLEX_FULL;
-
-		if (phy->duplex == DUPLEX_FULL) {
-			phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
-			phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
-		}
-	} else {
-		int bmcr = phy_read(phy, MII_BMCR);
-		if (bmcr < 0)
-			return bmcr;
-
-		if (bmcr & BMCR_FULLDPLX)
-			phy->duplex = DUPLEX_FULL;
-		else
-			phy->duplex = DUPLEX_HALF;
-		if (bmcr & BMCR_SPEED1000)
-			phy->speed = SPEED_1000;
-		else if (bmcr & BMCR_SPEED100)
-			phy->speed = SPEED_100;
-		else
-			phy->speed = SPEED_10;
-
-		phy->pause = phy->asym_pause = 0;
-	}
-	return 0;
-}
-
-/* Generic implementation for most 10/100/1000 PHYs */
-static struct mii_phy_ops generic_phy_ops = {
-	.setup_aneg	= genmii_setup_aneg,
-	.setup_forced	= genmii_setup_forced,
-	.poll_link	= genmii_poll_link,
-	.read_link	= genmii_read_link
-};
-
-static struct mii_phy_def genmii_phy_def = {
-	.phy_id		= 0x00000000,
-	.phy_id_mask	= 0x00000000,
-	.name		= "Generic MII",
-	.ops		= &generic_phy_ops
-};
-
-/* CIS8201 */
-#define MII_CIS8201_10BTCSR	0x16
-#define  TENBTCSR_ECHO_DISABLE	0x2000
-#define MII_CIS8201_EPCR	0x17
-#define  EPCR_MODE_MASK		0x3000
-#define  EPCR_GMII_MODE		0x0000
-#define  EPCR_RGMII_MODE	0x1000
-#define  EPCR_TBI_MODE		0x2000
-#define  EPCR_RTBI_MODE		0x3000
-#define MII_CIS8201_ACSR	0x1c
-#define  ACSR_PIN_PRIO_SELECT	0x0004
-
-static int cis8201_init(struct mii_phy *phy)
-{
-	int epcr;
-
-	epcr = phy_read(phy, MII_CIS8201_EPCR);
-	if (epcr < 0)
-		return epcr;
-
-	epcr &= ~EPCR_MODE_MASK;
-
-	switch (phy->mode) {
-	case PHY_MODE_TBI:
-		epcr |= EPCR_TBI_MODE;
-		break;
-	case PHY_MODE_RTBI:
-		epcr |= EPCR_RTBI_MODE;
-		break;
-	case PHY_MODE_GMII:
-		epcr |= EPCR_GMII_MODE;
-		break;
-	case PHY_MODE_RGMII:
-	default:
-		epcr |= EPCR_RGMII_MODE;
-	}
-
-	phy_write(phy, MII_CIS8201_EPCR, epcr);
-	
-	/* MII regs override strap pins */
-	phy_write(phy, MII_CIS8201_ACSR, 
-		  phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
-
-	/* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
-	phy_write(phy, MII_CIS8201_10BTCSR,
-		  phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
-
-	return 0;
-}
-
-static struct mii_phy_ops cis8201_phy_ops = {
-	.init		= cis8201_init,
-	.setup_aneg	= genmii_setup_aneg,
-	.setup_forced	= genmii_setup_forced,
-	.poll_link	= genmii_poll_link,
-	.read_link	= genmii_read_link
-};
-
-static struct mii_phy_def cis8201_phy_def = {
-	.phy_id		= 0x000fc410,
-	.phy_id_mask	= 0x000ffff0,
-	.name		= "CIS8201 Gigabit Ethernet",
-	.ops		= &cis8201_phy_ops
-};
-
-static struct mii_phy_def *mii_phy_table[] = {
-	&cis8201_phy_def,
-	&genmii_phy_def,
-	NULL
-};
-
-int mii_phy_probe(struct mii_phy *phy, int address)
-{
-	struct mii_phy_def *def;
-	int i;
-	int id;
-
-	phy->autoneg = AUTONEG_DISABLE;
-	phy->advertising = 0;
-	phy->address = address;
-	phy->speed = SPEED_10;
-	phy->duplex = DUPLEX_HALF;
-	phy->pause = phy->asym_pause = 0;
-
-	/* Take PHY out of isolate mode and reset it. */
-	if (mii_reset_phy(phy))
-		return -ENODEV;
-
-	/* Read ID and find matching entry */
-	id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
-	if (id < 0)
-		return -ENODEV;
-	for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
-		if ((id & def->phy_id_mask) == def->phy_id)
-			break;
-	/* Should never be NULL (we have a generic entry), but... */
-	if (!def)
-		return -ENODEV;
-
-	phy->def = def;
-
-	/* Determine PHY features if needed */
-	phy->features = def->features;
-	if (!phy->features) {
-		u16 bmsr = phy_read(phy, MII_BMSR);
-		if (bmsr & BMSR_ANEGCAPABLE)
-			phy->features |= SUPPORTED_Autoneg;
-		if (bmsr & BMSR_10HALF)
-			phy->features |= SUPPORTED_10baseT_Half;
-		if (bmsr & BMSR_10FULL)
-			phy->features |= SUPPORTED_10baseT_Full;
-		if (bmsr & BMSR_100HALF)
-			phy->features |= SUPPORTED_100baseT_Half;
-		if (bmsr & BMSR_100FULL)
-			phy->features |= SUPPORTED_100baseT_Full;
-		if (bmsr & BMSR_ESTATEN) {
-			u16 esr = phy_read(phy, MII_ESTATUS);
-			if (esr & ESTATUS_1000_TFULL)
-				phy->features |= SUPPORTED_1000baseT_Full;
-			if (esr & ESTATUS_1000_THALF)
-				phy->features |= SUPPORTED_1000baseT_Half;
-		}
-		phy->features |= SUPPORTED_MII;
-	}
-
-	/* Setup default advertising */
-	phy->advertising = phy->features;
-
-	return 0;
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h
deleted file mode 100644
index a70e0fea54c..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_phy.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_phy.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * February 2003
- *
- * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This file basically duplicates sungem_phy.{c,h} with different PHYs
- * supported. I'm looking into merging that in a single mii layer more
- * flexible than mii.c 
- */
-
-#ifndef _IBM_OCP_PHY_H_
-#define _IBM_OCP_PHY_H_
-
-struct mii_phy;
-
-/* Operations supported by any kind of PHY */
-struct mii_phy_ops {
-	int (*init) (struct mii_phy * phy);
-	int (*suspend) (struct mii_phy * phy, int wol_options);
-	int (*setup_aneg) (struct mii_phy * phy, u32 advertise);
-	int (*setup_forced) (struct mii_phy * phy, int speed, int fd);
-	int (*poll_link) (struct mii_phy * phy);
-	int (*read_link) (struct mii_phy * phy);
-};
-
-/* Structure used to statically define an mii/gii based PHY */
-struct mii_phy_def {
-	u32 phy_id;		/* Concatenated ID1 << 16 | ID2 */
-	u32 phy_id_mask;	/* Significant bits */
-	u32 features;		/* Ethtool SUPPORTED_* defines or 
-				   0 for autodetect */
-	int magic_aneg;		/* Autoneg does all speed test for us */
-	const char *name;
-	const struct mii_phy_ops *ops;
-};
-
-/* An instance of a PHY, partially borrowed from mii_if_info */
-struct mii_phy {
-	struct mii_phy_def *def;
-	u32 advertising;	/* Ethtool ADVERTISED_* defines */
-	u32 features;		/* Copied from mii_phy_def.features 
-				   or determined automaticaly */
-	int address;		/* PHY address */
-	int mode;		/* PHY mode */
-
-	/* 1: autoneg enabled, 0: disabled */
-	int autoneg;
-
-	/* forced speed & duplex (no autoneg)
-	 * partner speed & duplex & pause (autoneg)
-	 */
-	int speed;
-	int duplex;
-	int pause;
-	int asym_pause;
-
-	/* Provided by host chip */
-	struct net_device *dev;
-	int (*mdio_read) (struct net_device * dev, int addr, int reg);
-	void (*mdio_write) (struct net_device * dev, int addr, int reg,
-			    int val);
-};
-
-/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
- * filled, the remaining fields will be filled on return
- */
-int mii_phy_probe(struct mii_phy *phy, int address);
-int mii_reset_phy(struct mii_phy *phy);
-
-#endif				/* _IBM_OCP_PHY_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c
deleted file mode 100644
index 9dbb5e5936c..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_rgmii.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- * 	Matt Porter <mporter@kernel.crashing.org>
- * 	Copyright 2004 MontaVista Software, Inc.
- * 
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/ethtool.h>
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_debug.h"
-
-/* RGMIIx_FER */
-#define RGMII_FER_MASK(idx)	(0x7 << ((idx) * 4))
-#define RGMII_FER_RTBI(idx)	(0x4 << ((idx) * 4))
-#define RGMII_FER_RGMII(idx)	(0x5 << ((idx) * 4))
-#define RGMII_FER_TBI(idx)	(0x6 << ((idx) * 4))
-#define RGMII_FER_GMII(idx)	(0x7 << ((idx) * 4))
-
-/* RGMIIx_SSR */
-#define RGMII_SSR_MASK(idx)	(0x7 << ((idx) * 8))
-#define RGMII_SSR_100(idx)	(0x2 << ((idx) * 8))
-#define RGMII_SSR_1000(idx)	(0x4 << ((idx) * 8))
-
-/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
-static inline int rgmii_valid_mode(int phy_mode)
-{
-	return  phy_mode == PHY_MODE_GMII ||
-		phy_mode == PHY_MODE_RGMII ||
-		phy_mode == PHY_MODE_TBI ||
-		phy_mode == PHY_MODE_RTBI;
-}
-
-static inline const char *rgmii_mode_name(int mode)
-{
-	switch (mode) {
-	case PHY_MODE_RGMII:
-		return "RGMII";
-	case PHY_MODE_TBI:
-		return "TBI";
-	case PHY_MODE_GMII:
-		return "GMII";
-	case PHY_MODE_RTBI:
-		return "RTBI";
-	default:
-		BUG();
-	}
-}
-
-static inline u32 rgmii_mode_mask(int mode, int input)
-{
-	switch (mode) {
-	case PHY_MODE_RGMII:
-		return RGMII_FER_RGMII(input);
-	case PHY_MODE_TBI:
-		return RGMII_FER_TBI(input);
-	case PHY_MODE_GMII:
-		return RGMII_FER_GMII(input);
-	case PHY_MODE_RTBI:
-		return RGMII_FER_RTBI(input);
-	default:
-		BUG();
-	}
-}
-
-static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
-{
-	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
-	struct rgmii_regs *p;
-
-	RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
-
-	if (!dev) {
-		dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
-		if (!dev) {
-			printk(KERN_ERR
-			       "rgmii%d: couldn't allocate device structure!\n",
-			       ocpdev->def->index);
-			return -ENOMEM;
-		}
-
-		p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
-						 sizeof(struct rgmii_regs));
-		if (!p) {
-			printk(KERN_ERR
-			       "rgmii%d: could not ioremap device registers!\n",
-			       ocpdev->def->index);
-			kfree(dev);
-			return -ENOMEM;
-		}
-
-		dev->base = p;
-		ocp_set_drvdata(ocpdev, dev);
-
-		/* Disable all inputs by default */
-		out_be32(&p->fer, 0);
-	} else
-		p = dev->base;
-
-	/* Enable this input */
-	out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
-
-	printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
-	       ocpdev->def->index, input, rgmii_mode_name(mode));
-
-	++dev->users;
-	return 0;
-}
-
-int __init rgmii_attach(void *emac)
-{
-	struct ocp_enet_private *dev = emac;
-	struct ocp_func_emac_data *emacdata = dev->def->additions;
-
-	/* Check if we need to attach to a RGMII */
-	if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
-		dev->rgmii_input = emacdata->rgmii_mux;
-		dev->rgmii_dev =
-		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
-				    emacdata->rgmii_idx);
-		if (!dev->rgmii_dev) {
-			printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
-			       dev->def->index, emacdata->rgmii_idx);
-			return -ENODEV;
-		}
-		if (rgmii_init
-		    (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
-			printk(KERN_ERR
-			       "emac%d: rgmii%d initialization failed!\n",
-			       dev->def->index, emacdata->rgmii_idx);
-			return -ENODEV;
-		}
-	}
-	return 0;
-}
-
-void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
-{
-	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
-	u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
-
-	RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
-
-	if (speed == SPEED_1000)
-		ssr |= RGMII_SSR_1000(input);
-	else if (speed == SPEED_100)
-		ssr |= RGMII_SSR_100(input);
-
-	out_be32(&dev->base->ssr, ssr);
-}
-
-void __rgmii_fini(struct ocp_device *ocpdev, int input)
-{
-	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
-	BUG_ON(!dev || dev->users == 0);
-
-	RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
-
-	/* Disable this input */
-	out_be32(&dev->base->fer,
-		 in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
-
-	if (!--dev->users) {
-		/* Free everything if this is the last user */
-		ocp_set_drvdata(ocpdev, NULL);
-		iounmap((void *)dev->base);
-		kfree(dev);
-	}
-}
-
-int __rgmii_get_regs_len(struct ocp_device *ocpdev)
-{
-	return sizeof(struct emac_ethtool_regs_subhdr) +
-	    sizeof(struct rgmii_regs);
-}
-
-void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
-{
-	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
-	struct emac_ethtool_regs_subhdr *hdr = buf;
-	struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
-
-	hdr->version = 0;
-	hdr->index = ocpdev->def->index;
-	memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
-	return regs + 1;
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
deleted file mode 100644
index 971e45815c6..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_rgmii.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
- *
- * Based on ocp_zmii.h/ibm_emac_zmii.h
- * Armin Kuster akuster@mvista.com
- *
- * Copyright 2004 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef _IBM_EMAC_RGMII_H_
-#define _IBM_EMAC_RGMII_H_
-
-
-/* RGMII bridge */
-struct rgmii_regs {
-	u32 fer;		/* Function enable register */
-	u32 ssr;		/* Speed select register */
-};
-
-/* RGMII device */
-struct ibm_ocp_rgmii {
-	struct rgmii_regs __iomem *base;
-	int users;		/* number of EMACs using this RGMII bridge */
-};
-
-#ifdef CONFIG_IBM_EMAC_RGMII
-int rgmii_attach(void *emac) __init;
-
-void __rgmii_fini(struct ocp_device *ocpdev, int input);
-static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
-{
-	if (ocpdev)
-		__rgmii_fini(ocpdev, input);
-}
-
-void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
-
-int __rgmii_get_regs_len(struct ocp_device *ocpdev);
-static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
-{
-	return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
-}
-
-void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
-#else
-# define rgmii_attach(x)	0
-# define rgmii_fini(x,y)	((void)0)
-# define rgmii_set_speed(x,y,z)	((void)0)
-# define rgmii_get_regs_len(x)	0
-# define rgmii_dump_regs(x,buf)	(buf)
-#endif				/* !CONFIG_IBM_EMAC_RGMII */
-
-#endif				/* _IBM_EMAC_RGMII_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c
deleted file mode 100644
index 3c2d5ba522a..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_tah.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_tah.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
- *
- * Copyright 2004 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-
-static int __init tah_init(struct ocp_device *ocpdev)
-{
-	struct tah_regs *p;
-
-	if (ocp_get_drvdata(ocpdev)) {
-		printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
-		return -EBUSY;
-	}
-
-	/* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
-	p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
-	if (!p) {
-		printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
-		       ocpdev->def->index);
-		return -ENOMEM;
-	}
-	ocp_set_drvdata(ocpdev, p);
-	__tah_reset(ocpdev);
-
-	return 0;
-}
-
-int __init tah_attach(void *emac)
-{
-	struct ocp_enet_private *dev = emac;
-	struct ocp_func_emac_data *emacdata = dev->def->additions;
-
-	/* Check if we need to attach to a TAH */
-	if (emacdata->tah_idx >= 0) {
-		dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
-					       emacdata->tah_idx);
-		if (!dev->tah_dev) {
-			printk(KERN_ERR "emac%d: unknown tah%d!\n",
-			       dev->def->index, emacdata->tah_idx);
-			return -ENODEV;
-		}
-		if (tah_init(dev->tah_dev)) {
-			printk(KERN_ERR
-			       "emac%d: tah%d initialization failed!\n",
-			       dev->def->index, emacdata->tah_idx);
-			return -ENODEV;
-		}
-	}
-	return 0;
-}
-
-void __tah_fini(struct ocp_device *ocpdev)
-{
-	struct tah_regs *p = ocp_get_drvdata(ocpdev);
-	BUG_ON(!p);
-	ocp_set_drvdata(ocpdev, NULL);
-	iounmap((void *)p);
-}
-
-void __tah_reset(struct ocp_device *ocpdev)
-{
-	struct tah_regs *p = ocp_get_drvdata(ocpdev);
-	int n;
-
-	/* Reset TAH */
-	out_be32(&p->mr, TAH_MR_SR);
-	n = 100;
-	while ((in_be32(&p->mr) & TAH_MR_SR) && n)
-		--n;
-
-	if (unlikely(!n))
-		printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
-
-	/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
-	out_be32(&p->mr,
-		 TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
-		 TAH_MR_DIG);
-}
-
-int __tah_get_regs_len(struct ocp_device *ocpdev)
-{
-	return sizeof(struct emac_ethtool_regs_subhdr) +
-	    sizeof(struct tah_regs);
-}
-
-void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
-{
-	struct tah_regs *dev = ocp_get_drvdata(ocpdev);
-	struct emac_ethtool_regs_subhdr *hdr = buf;
-	struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
-
-	hdr->version = 0;
-	hdr->index = ocpdev->def->index;
-	memcpy_fromio(regs, dev, sizeof(struct tah_regs));
-	return regs + 1;
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h
deleted file mode 100644
index ccf64915e1e..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_tah.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_tah.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
- *
- * Copyright 2004 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef _IBM_EMAC_TAH_H
-#define _IBM_EMAC_TAH_H
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-
-/* TAH */
-struct tah_regs {
-	u32 revid;
-	u32 pad[3];
-	u32 mr;
-	u32 ssr0;
-	u32 ssr1;
-	u32 ssr2;
-	u32 ssr3;
-	u32 ssr4;
-	u32 ssr5;
-	u32 tsr;
-};
-
-/* TAH engine */
-#define TAH_MR_CVR		0x80000000
-#define TAH_MR_SR		0x40000000
-#define TAH_MR_ST_256		0x01000000
-#define TAH_MR_ST_512		0x02000000
-#define TAH_MR_ST_768		0x03000000
-#define TAH_MR_ST_1024		0x04000000
-#define TAH_MR_ST_1280		0x05000000
-#define TAH_MR_ST_1536		0x06000000
-#define TAH_MR_TFS_16KB		0x00000000
-#define TAH_MR_TFS_2KB		0x00200000
-#define TAH_MR_TFS_4KB		0x00400000
-#define TAH_MR_TFS_6KB		0x00600000
-#define TAH_MR_TFS_8KB		0x00800000
-#define TAH_MR_TFS_10KB		0x00a00000
-#define TAH_MR_DTFP		0x00100000
-#define TAH_MR_DIG		0x00080000
-
-#ifdef CONFIG_IBM_EMAC_TAH
-int tah_attach(void *emac) __init;
-
-void __tah_fini(struct ocp_device *ocpdev);
-static inline void tah_fini(struct ocp_device *ocpdev)
-{
-	if (ocpdev)
-		__tah_fini(ocpdev);
-}
-
-void __tah_reset(struct ocp_device *ocpdev);
-static inline void tah_reset(struct ocp_device *ocpdev)
-{
-	if (ocpdev)
-		__tah_reset(ocpdev);
-}
-
-int __tah_get_regs_len(struct ocp_device *ocpdev);
-static inline int tah_get_regs_len(struct ocp_device *ocpdev)
-{
-	return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
-}
-
-void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
-#else
-# define tah_attach(x)		0
-# define tah_fini(x)		((void)0)
-# define tah_reset(x)		((void)0)
-# define tah_get_regs_len(x)	0
-# define tah_dump_regs(x,buf)	(buf)
-#endif				/* !CONFIG_IBM_EMAC_TAH */
-
-#endif				/* _IBM_EMAC_TAH_H */
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c
deleted file mode 100644
index 2c0fdb0cabf..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_zmii.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_zmii.c
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- *      Armin Kuster <akuster@mvista.com>
- * 	Copyright 2001 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/ethtool.h>
-#include <asm/io.h>
-
-#include "ibm_emac_core.h"
-#include "ibm_emac_debug.h"
-
-/* ZMIIx_FER */
-#define ZMII_FER_MDI(idx)	(0x80000000 >> ((idx) * 4))
-#define ZMII_FER_MDI_ALL	(ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
-				 ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
-
-#define ZMII_FER_SMII(idx)	(0x40000000 >> ((idx) * 4))
-#define ZMII_FER_RMII(idx)	(0x20000000 >> ((idx) * 4))
-#define ZMII_FER_MII(idx)	(0x10000000 >> ((idx) * 4))
-
-/* ZMIIx_SSR */
-#define ZMII_SSR_SCI(idx)	(0x40000000 >> ((idx) * 4))
-#define ZMII_SSR_FSS(idx)	(0x20000000 >> ((idx) * 4))
-#define ZMII_SSR_SP(idx)	(0x10000000 >> ((idx) * 4))
-
-/* ZMII only supports MII, RMII and SMII 
- * we also support autodetection for backward compatibility
- */
-static inline int zmii_valid_mode(int mode)
-{
-	return  mode == PHY_MODE_MII ||
-		mode == PHY_MODE_RMII ||
-		mode == PHY_MODE_SMII ||
-		mode == PHY_MODE_NA;
-}
-
-static inline const char *zmii_mode_name(int mode)
-{
-	switch (mode) {
-	case PHY_MODE_MII:
-		return "MII";
-	case PHY_MODE_RMII:
-		return "RMII";
-	case PHY_MODE_SMII:
-		return "SMII";
-	default:
-		BUG();
-	}
-}
-
-static inline u32 zmii_mode_mask(int mode, int input)
-{
-	switch (mode) {
-	case PHY_MODE_MII:
-		return ZMII_FER_MII(input);
-	case PHY_MODE_RMII:
-		return ZMII_FER_RMII(input);
-	case PHY_MODE_SMII:
-		return ZMII_FER_SMII(input);
-	default:
-		return 0;
-	}
-}
-
-static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
-{
-	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
-	struct zmii_regs __iomem *p;
-
-	ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
-
-	if (!dev) {
-		dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
-		if (!dev) {
-			printk(KERN_ERR
-			       "zmii%d: couldn't allocate device structure!\n",
-			       ocpdev->def->index);
-			return -ENOMEM;
-		}
-		dev->mode = PHY_MODE_NA;
-
-		p = ioremap(ocpdev->def->paddr, sizeof(struct zmii_regs));
-		if (!p) {
-			printk(KERN_ERR
-			       "zmii%d: could not ioremap device registers!\n",
-			       ocpdev->def->index);
-			kfree(dev);
-			return -ENOMEM;
-		}
-		dev->base = p;
-		ocp_set_drvdata(ocpdev, dev);
-		
-		/* We may need FER value for autodetection later */
-		dev->fer_save = in_be32(&p->fer);
-
-		/* Disable all inputs by default */
-		out_be32(&p->fer, 0);
-	} else
-		p = dev->base;
-
-	if (!zmii_valid_mode(*mode)) {
-		/* Probably an EMAC connected to RGMII, 
-		 * but it still may need ZMII for MDIO 
-		 */
-		goto out;
-	}
-
-	/* Autodetect ZMII mode if not specified.
-	 * This is only for backward compatibility with the old driver.
-	 * Please, always specify PHY mode in your board port to avoid
-	 * any surprises.
-	 */
-	if (dev->mode == PHY_MODE_NA) {
-		if (*mode == PHY_MODE_NA) {
-			u32 r = dev->fer_save;
-
-			ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
-				 ocpdev->def->index, r);
-			
-			if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
-				dev->mode = PHY_MODE_MII;
-			else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
-				dev->mode = PHY_MODE_RMII;
-			else
-				dev->mode = PHY_MODE_SMII;
-		} else
-			dev->mode = *mode;
-
-		printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
-		       ocpdev->def->index, zmii_mode_name(dev->mode));
-	} else {
-		/* All inputs must use the same mode */
-		if (*mode != PHY_MODE_NA && *mode != dev->mode) {
-			printk(KERN_ERR
-			       "zmii%d: invalid mode %d specified for input %d\n",
-			       ocpdev->def->index, *mode, input);
-			return -EINVAL;
-		}
-	}
-
-	/* Report back correct PHY mode, 
-	 * it may be used during PHY initialization.
-	 */
-	*mode = dev->mode;
-
-	/* Enable this input */
-	out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
-      out:
-	++dev->users;
-	return 0;
-}
-
-int __init zmii_attach(void *emac)
-{
-	struct ocp_enet_private *dev = emac;
-	struct ocp_func_emac_data *emacdata = dev->def->additions;
-
-	if (emacdata->zmii_idx >= 0) {
-		dev->zmii_input = emacdata->zmii_mux;
-		dev->zmii_dev =
-		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
-				    emacdata->zmii_idx);
-		if (!dev->zmii_dev) {
-			printk(KERN_ERR "emac%d: unknown zmii%d!\n",
-			       dev->def->index, emacdata->zmii_idx);
-			return -ENODEV;
-		}
-		if (zmii_init
-		    (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
-			printk(KERN_ERR
-			       "emac%d: zmii%d initialization failed!\n",
-			       dev->def->index, emacdata->zmii_idx);
-			return -ENODEV;
-		}
-	}
-	return 0;
-}
-
-void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
-{
-	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
-	u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
-
-	ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
-
-	out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
-}
-
-void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
-{
-	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
-	u32 ssr = in_be32(&dev->base->ssr);
-
-	ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
-
-	if (speed == SPEED_100)
-		ssr |= ZMII_SSR_SP(input);
-	else
-		ssr &= ~ZMII_SSR_SP(input);
-
-	out_be32(&dev->base->ssr, ssr);
-}
-
-void __zmii_fini(struct ocp_device *ocpdev, int input)
-{
-	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
-	BUG_ON(!dev || dev->users == 0);
-
-	ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
-
-	/* Disable this input */
-	out_be32(&dev->base->fer,
-		 in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
-
-	if (!--dev->users) {
-		/* Free everything if this is the last user */
-		ocp_set_drvdata(ocpdev, NULL);
-		iounmap(dev->base);
-		kfree(dev);
-	}
-}
-
-int __zmii_get_regs_len(struct ocp_device *ocpdev)
-{
-	return sizeof(struct emac_ethtool_regs_subhdr) +
-	    sizeof(struct zmii_regs);
-}
-
-void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
-{
-	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
-	struct emac_ethtool_regs_subhdr *hdr = buf;
-	struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
-
-	hdr->version = 0;
-	hdr->index = ocpdev->def->index;
-	memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
-	return regs + 1;
-}
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h
deleted file mode 100644
index fad6d8bf983..00000000000
--- a/drivers/net/ibm_emac/ibm_emac_zmii.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * drivers/net/ibm_emac/ibm_emac_zmii.h
- *
- * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
- *
- * Copyright (c) 2004, 2005 Zultys Technologies.
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *
- * Based on original work by
- *      Armin Kuster <akuster@mvista.com>
- * 	Copyright 2001 MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifndef _IBM_EMAC_ZMII_H_
-#define _IBM_EMAC_ZMII_H_
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-
-/* ZMII bridge registers */
-struct zmii_regs {
-	u32 fer;		/* Function enable reg */
-	u32 ssr;		/* Speed select reg */
-	u32 smiirs;		/* SMII status reg */
-};
-
-/* ZMII device */
-struct ibm_ocp_zmii {
-	struct zmii_regs __iomem *base;
-	int mode;		/* subset of PHY_MODE_XXXX */
-	int users;		/* number of EMACs using this ZMII bridge */
-	u32 fer_save;		/* FER value left by firmware */
-};
-
-#ifdef CONFIG_IBM_EMAC_ZMII
-int zmii_attach(void *emac) __init;
-
-void __zmii_fini(struct ocp_device *ocpdev, int input);
-static inline void zmii_fini(struct ocp_device *ocpdev, int input)
-{
-	if (ocpdev)
-		__zmii_fini(ocpdev, input);
-}
-
-void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
-static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
-{
-	if (ocpdev)
-		__zmii_enable_mdio(ocpdev, input);
-}
-
-void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
-static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
-				  int speed)
-{
-	if (ocpdev)
-		__zmii_set_speed(ocpdev, input, speed);
-}
-
-int __zmii_get_regs_len(struct ocp_device *ocpdev);
-static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
-{
-	return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
-}
-
-void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
-
-#else
-# define zmii_attach(x)		0
-# define zmii_fini(x,y)		((void)0)
-# define zmii_enable_mdio(x,y)	((void)0)
-# define zmii_set_speed(x,y,z)	((void)0)
-# define zmii_get_regs_len(x)	0
-# define zmii_dump_regs(x,buf)	(buf)
-#endif				/* !CONFIG_IBM_EMAC_ZMII */
-
-#endif				/* _IBM_EMAC_ZMII_H_ */