ath5k: Update reset code

 * Update reset and sync with HALs

 * Clean up eeprom settings and tweaking of initvals and
   put them on separate functions

 * Set/Restore 32KHz ref clk operation

 * Add some more documentation

 TODO: Spur mitigation, tpc, half/quarter rate, compression etc

 v2: Address comments from Bob and Felix and fix RSSI threshold bug
 introduced on the first version of the patch

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

6 files changed, 732 insertions, 296 deletions

diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index 5b2e0da0a22..b9af2b84c05 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -222,6 +222,7 @@
 #endif
 
 /* Initial values */
+#define	AR5K_INIT_CYCRSSI_THR1			2
 #define AR5K_INIT_TX_LATENCY			502
 #define AR5K_INIT_USEC				39
 #define AR5K_INIT_USEC_TURBO			79
@@ -313,7 +314,7 @@ struct ath5k_srev_name {
 #define AR5K_SREV_AR5424	0x90 /* Condor */
 #define AR5K_SREV_AR5413	0xa4 /* Eagle lite */
 #define AR5K_SREV_AR5414	0xa0 /* Eagle */
-#define AR5K_SREV_AR2415	0xb0 /* Cobra */
+#define AR5K_SREV_AR2415	0xb0 /* Talon */
 #define AR5K_SREV_AR5416	0xc0 /* PCI-E */
 #define AR5K_SREV_AR5418	0xca /* PCI-E */
 #define AR5K_SREV_AR2425	0xe0 /* Swan */
@@ -331,7 +332,7 @@ struct ath5k_srev_name {
 #define	AR5K_SREV_RAD_2112B	0x46
 #define AR5K_SREV_RAD_2413	0x50
 #define AR5K_SREV_RAD_5413	0x60
-#define AR5K_SREV_RAD_2316	0x70
+#define AR5K_SREV_RAD_2316	0x70 /* Cobra SoC */
 #define AR5K_SREV_RAD_2317	0x80
 #define AR5K_SREV_RAD_5424	0xa0 /* Mostly same as 5413 */
 #define AR5K_SREV_RAD_2425	0xa2
@@ -340,7 +341,7 @@ struct ath5k_srev_name {
 #define AR5K_SREV_PHY_5211	0x30
 #define AR5K_SREV_PHY_5212	0x41
 #define	AR5K_SREV_PHY_5212A	0x42
-#define AR5K_SREV_PHY_2112B	0x43
+#define AR5K_SREV_PHY_5212B	0x43
 #define AR5K_SREV_PHY_2413	0x45
 #define AR5K_SREV_PHY_5413	0x61
 #define AR5K_SREV_PHY_2425	0x70
@@ -1030,7 +1031,6 @@ struct ath5k_hw {
 	u16			ah_phy_revision;
 	u16			ah_radio_5ghz_revision;
 	u16			ah_radio_2ghz_revision;
-	u32			ah_phy_spending;
 
 	enum ath5k_version	ah_version;
 	enum ath5k_radio	ah_radio;
@@ -1156,6 +1156,7 @@ extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_l
 /* EEPROM access functions */
 extern int ath5k_eeprom_init(struct ath5k_hw *ah);
 extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
+extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah);
 
 /* Protocol Control Unit Functions */
 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
@@ -1258,6 +1259,7 @@ extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
 
 /*
  * Translate usec to hw clock units
+ * TODO: Half/quarter rate
  */
 static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
 {
@@ -1266,6 +1268,7 @@ static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
 
 /*
  * Translate hw clock units to usec
+ * TODO: Half/quarter rate
  */
 static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
 {
diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c
index a3f07a4ebf4..05bc5cb44e8 100644
--- a/drivers/net/wireless/ath5k/attach.c
+++ b/drivers/net/wireless/ath5k/attach.c
@@ -169,7 +169,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 		ah->ah_single_chip = false;
 		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
 							CHANNEL_2GHZ);
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
 		break;
 	case AR5K_SREV_RAD_5112:
 	case AR5K_SREV_RAD_2112:
@@ -177,38 +176,31 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 		ah->ah_single_chip = false;
 		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
 							CHANNEL_2GHZ);
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
 		break;
 	case AR5K_SREV_RAD_2413:
 		ah->ah_radio = AR5K_RF2413;
 		ah->ah_single_chip = true;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
 		break;
 	case AR5K_SREV_RAD_5413:
 		ah->ah_radio = AR5K_RF5413;
 		ah->ah_single_chip = true;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 		break;
 	case AR5K_SREV_RAD_2316:
 		ah->ah_radio = AR5K_RF2316;
 		ah->ah_single_chip = true;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
 		break;
 	case AR5K_SREV_RAD_2317:
 		ah->ah_radio = AR5K_RF2317;
 		ah->ah_single_chip = true;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2317;
 		break;
 	case AR5K_SREV_RAD_5424:
 		if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
 		ah->ah_mac_version == AR5K_SREV_AR2417){
 			ah->ah_radio = AR5K_RF2425;
 			ah->ah_single_chip = true;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
 		} else {
 			ah->ah_radio = AR5K_RF5413;
 			ah->ah_single_chip = true;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 		}
 		break;
 	default:
@@ -227,29 +219,25 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 			ah->ah_radio = AR5K_RF2425;
 			ah->ah_single_chip = true;
 			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
 		} else if (srev == AR5K_SREV_AR5213A &&
-		ah->ah_phy_revision == AR5K_SREV_PHY_2112B) {
+		ah->ah_phy_revision == AR5K_SREV_PHY_5212B) {
 			ah->ah_radio = AR5K_RF5112;
 			ah->ah_single_chip = false;
-			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2112B;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B;
 		} else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) {
 			ah->ah_radio = AR5K_RF2316;
 			ah->ah_single_chip = true;
 			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
 		} else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
 		ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
 			ah->ah_radio = AR5K_RF5413;
 			ah->ah_single_chip = true;
 			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 		} else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
 		ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
 			ah->ah_radio = AR5K_RF2413;
 			ah->ah_single_chip = true;
 			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
 		} else {
 			ATH5K_ERR(sc, "Couldn't identify radio revision.\n");
 			ret = -ENODEV;
diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c
index b4ec539c464..21b9334eeaf 100644
--- a/drivers/net/wireless/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath5k/eeprom.c
@@ -204,7 +204,7 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
 
 	/* Get antenna modes */
 	ah->ah_antenna[mode][0] =
-	    (ee->ee_ant_control[mode][0] << 4) | 0x1;
+	    (ee->ee_ant_control[mode][0] << 4);
 	ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
 	     ee->ee_ant_control[mode][1] 	|
 	    (ee->ee_ant_control[mode][2] << 6) 	|
@@ -1412,6 +1412,7 @@ ath5k_eeprom_init(struct ath5k_hw *ah)
 
 	return 0;
 }
+
 /*
  * Read the MAC address from eeprom
  */
@@ -1448,3 +1449,14 @@ int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
 	return 0;
 }
 
+bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah)
+{
+	u16 data;
+
+	ath5k_hw_eeprom_read(ah, AR5K_EEPROM_IS_HB63, &data);
+
+	if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && data)
+		return true;
+	else
+		return false;
+}
diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h
index 09eb7d0176a..1deebc0257d 100644
--- a/drivers/net/wireless/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath5k/eeprom.h
@@ -25,6 +25,7 @@
 #define AR5K_EEPROM_MAGIC_5211		0x0000145b /* 5211 */
 #define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
 
+#define	AR5K_EEPROM_IS_HB63		0x000b	/* Talon detect */
 #define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
 #define AR5K_EEPROM_CHECKSUM		0x00c0	/* EEPROM checksum */
 #define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 84f4669278a..2dc008e1022 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -187,6 +187,7 @@
 #define AR5K_TXCFG_FRMPAD_DIS		0x00002000	/* [5211+] */
 #define AR5K_TXCFG_RDY_CBR_DIS		0x00004000	/* Ready time CBR disable [5211+] */
 #define AR5K_TXCFG_JUMBO_FRM_MODE	0x00008000	/* Jumbo frame mode [5211+] */
+#define	AR5K_TXCFG_DCU_DBL_BUF_DIS	0x00008000	/* Disable double buffering on DCU */
 #define AR5K_TXCFG_DCU_CACHING_DIS	0x00010000	/* Disable DCU caching */
 
 /*
@@ -753,7 +754,7 @@
  */
 #define AR5K_DCU_SEQNUM_BASE		0x1140
 #define	AR5K_DCU_SEQNUM_M		0x00000fff
-#define	AR5K_QUEUE_DFS_SEQNUM(_q)	AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
+#define	AR5K_QUEUE_DCU_SEQNUM(_q)	AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
 
 /*
  * DCU global IFS SIFS register
@@ -1467,7 +1468,7 @@
 #define AR5K_ADDAC_TEST_TRIG_PTY	0x00020000	/* Trigger polarity */
 #define AR5K_ADDAC_TEST_RXCONT		0x00040000	/* Continuous capture */
 #define AR5K_ADDAC_TEST_CAPTURE		0x00080000	/* Begin capture */
-#define AR5K_ADDAC_TEST_TST_ARM		0x00100000	/* Test ARM (Adaptive Radio Mode ?) */
+#define AR5K_ADDAC_TEST_TST_ARM		0x00100000	/* ARM rx buffer for capture */
 
 /*
  * Default antenna register [5211+]
@@ -1679,7 +1680,7 @@
  * TSF parameter register
  */
 #define AR5K_TSF_PARM			0x8104			/* Register Address */
-#define AR5K_TSF_PARM_INC_M		0x000000ff	/* Mask for TSF increment */
+#define AR5K_TSF_PARM_INC		0x000000ff	/* Mask for TSF increment */
 #define AR5K_TSF_PARM_INC_S		0
 
 /*
@@ -1691,7 +1692,7 @@
 #define AR5K_QOS_NOACK_BIT_OFFSET	0x00000070	/* ??? */
 #define AR5K_QOS_NOACK_BIT_OFFSET_S	4
 #define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000180	/* ??? */
-#define AR5K_QOS_NOACK_BYTE_OFFSET_S	8
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S	7
 
 /*
  * PHY error filter register
@@ -1850,15 +1851,14 @@
  * TST_2 (Misc config parameters)
  */
 #define	AR5K_PHY_TST2			0x9800			/* Register Address */
-#define AR5K_PHY_TST2_TRIG_SEL		0x00000001	/* Trigger select (?) (field ?) */
-#define AR5K_PHY_TST2_TRIG		0x00000010	/* Trigger (?) (field ?) */
-#define AR5K_PHY_TST2_CBUS_MODE		0x00000100	/* Cardbus mode (?) */
-/* bit reserved */
+#define AR5K_PHY_TST2_TRIG_SEL		0x00000007	/* Trigger select (?)*/
+#define AR5K_PHY_TST2_TRIG		0x00000010	/* Trigger (?) */
+#define AR5K_PHY_TST2_CBUS_MODE		0x00000060	/* Cardbus mode (?) */
 #define AR5K_PHY_TST2_CLK32		0x00000400	/* CLK_OUT is CLK32 (32Khz external) */
 #define AR5K_PHY_TST2_CHANCOR_DUMP_EN	0x00000800	/* Enable Chancor dump (?) */
 #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP	0x00001000	/* Even Chancor dump (?) */
 #define AR5K_PHY_TST2_RFSILENT_EN	0x00002000	/* Enable RFSILENT */
-#define AR5K_PHY_TST2_ALT_RFDATA	0x00004000	/* Alternate RFDATA (5-2GHz switch) */
+#define AR5K_PHY_TST2_ALT_RFDATA	0x00004000	/* Alternate RFDATA (5-2GHz switch ?) */
 #define AR5K_PHY_TST2_MINI_OBS_EN	0x00008000	/* Enable mini OBS (?) */
 #define AR5K_PHY_TST2_RX2_IS_RX5_INV	0x00010000	/* 2GHz rx path is the 5GHz path inverted (?) */
 #define AR5K_PHY_TST2_SLOW_CLK160	0x00020000	/* Slow CLK160 (?) */
@@ -1928,8 +1928,8 @@
 #define	AR5K_PHY_RF_CTL2_TXF2TXD_START_S	0
 
 #define AR5K_PHY_RF_CTL3		0x9828			/* Register Address */
-#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* TX end to XLNA on */
-#define	AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S	0
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000ff00	/* TX end to XLNA on */
+#define	AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S	8
 
 #define	AR5K_PHY_ADC_CTL			0x982c
 #define	AR5K_PHY_ADC_CTL_INBUFGAIN_OFF		0x00000003
@@ -1963,7 +1963,7 @@
 #define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* AGC settling time */
 #define	AR5K_PHY_SETTLING_AGC_S		0
 #define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Switch settlig time */
-#define	AR5K_PHY_SETTLINK_SWITCH_S	7
+#define	AR5K_PHY_SETTLING_SWITCH_S	7
 
 /*
  * PHY Gain registers
@@ -2069,14 +2069,14 @@
  * PHY sleep registers [5112+]
  */
 #define AR5K_PHY_SCR			0x9870
-#define AR5K_PHY_SCR_32MHZ		0x0000001f
 
 #define AR5K_PHY_SLMT			0x9874
 #define AR5K_PHY_SLMT_32MHZ		0x0000007f
 
 #define AR5K_PHY_SCAL			0x9878
 #define AR5K_PHY_SCAL_32MHZ		0x0000000e
-
+#define	AR5K_PHY_SCAL_32MHZ_2417	0x0000000a
+#define	AR5K_PHY_SCAL_32MHZ_HB63	0x00000032
 
 /*
  * PHY PLL (Phase Locked Loop) control register
@@ -2156,7 +2156,8 @@
 #define	AR5K_PHY_ANT_CTL_TXRX_EN	0x00000001	/* Enable TX/RX (?) */
 #define	AR5K_PHY_ANT_CTL_SECTORED_ANT	0x00000004	/* Sectored Antenna */
 #define	AR5K_PHY_ANT_CTL_HITUNE5	0x00000008	/* Hitune5 (?) */
-#define	AR5K_PHY_ANT_CTL_SWTABLE_IDLE	0x00000010	/* Switch table idle (?) */
+#define	AR5K_PHY_ANT_CTL_SWTABLE_IDLE	0x000003f0	/* Switch table idle (?) */
+#define	AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S	4
 
 /*
  * PHY receiver delay register [5111+]
@@ -2196,7 +2197,7 @@
 #define	AR5K_PHY_OFDM_SELFCORR			0x9924			/* Register Address */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN	0x00000001	/* Enable cyclic RSSI thr 1 */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1	0x000000fe	/* Mask for Cyclic RSSI threshold 1 */
-#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S	0
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S	1
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3	0x00000100	/* Cyclic RSSI threshold 3 (field) (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN	0x00008000	/* Enable 1A RSSI threshold (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR	0x00010000	/* 1A RSSI threshold (field) (?) */
@@ -2279,6 +2280,15 @@
 			AR5K_PHY_FRAME_CTL_TIMING_ERR
 
 /*
+ * PHY Tx Power adjustment register [5212A+]
+ */
+#define	AR5K_PHY_TX_PWR_ADJ			0x994c
+#define	AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA	0x00000fc0
+#define	AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S	6
+#define	AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX	0x00fc0000
+#define	AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S	18
+
+/*
  * PHY radar detection register [5111+]
  */
 #define	AR5K_PHY_RADAR			0x9954
@@ -2331,7 +2341,7 @@
 #define AR5K_PHY_SIGMA_DELTA_FILT2_S	3
 #define AR5K_PHY_SIGMA_DELTA_FILT1	0x00001f00
 #define AR5K_PHY_SIGMA_DELTA_FILT1_S	8
-#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP	0x01ff3000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP	0x01ffe000
 #define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S	13
 
 /*
@@ -2459,17 +2469,7 @@
 #define AR5K_PHY_SDELAY			0x99f4
 #define AR5K_PHY_SDELAY_32MHZ		0x000000ff
 #define AR5K_PHY_SPENDING		0x99f8
-#define AR5K_PHY_SPENDING_14		0x00000014
-#define AR5K_PHY_SPENDING_18		0x00000018
-#define AR5K_PHY_SPENDING_RF5111	0x00000018
-#define AR5K_PHY_SPENDING_RF5112	0x00000014
-/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
-/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
-#define AR5K_PHY_SPENDING_RF5413	0x00000018
-#define AR5K_PHY_SPENDING_RF2413	0x00000018
-#define AR5K_PHY_SPENDING_RF2316	0x00000018
-#define AR5K_PHY_SPENDING_RF2317	0x00000018
-#define AR5K_PHY_SPENDING_RF2425	0x00000014
+
 
 /*
  * PHY PAPD I (power?) table (?)
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
index 579c64ce610..1531ccd3506 100644
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -25,7 +25,8 @@
   Reset functions and helpers
 \*****************************/
 
-#include <linux/pci.h>
+#include <linux/pci.h> 		/* To determine if a card is pci-e */
+#include <linux/bitops.h>	/* For get_bitmask_order */
 #include "ath5k.h"
 #include "reg.h"
 #include "base.h"
@@ -37,10 +38,14 @@
  * @ah: the &struct ath5k_hw
  * @channel: the currently set channel upon reset
  *
- * Write the OFDM timings for the AR5212 upon reset. This is a helper for
- * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
- * depending on the bandwidth of the channel.
+ * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
+ * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset().
  *
+ * Since delta slope is floating point we split it on its exponent and
+ * mantissa and provide these values on hw.
+ *
+ * For more infos i think this patent is related
+ * http://www.freepatentsonline.com/7184495.html
  */
 static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
 	struct ieee80211_channel *channel)
@@ -53,23 +58,34 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
 		!(channel->hw_value & CHANNEL_OFDM))
 		BUG();
 
-	/* Seems there are two PLLs, one for baseband sampling and one
-	 * for tuning. Tuning basebands are 40 MHz or 80MHz when in
-	 * turbo. */
-	clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
-	coef_scaled = ((5 * (clock << 24)) / 2) /
-	channel->center_freq;
+	/* Get coefficient
+	 * ALGO: coef = (5 * clock * carrier_freq) / 2)
+	 * we scale coef by shifting clock value by 24 for
+	 * better precision since we use integers */
+	/* TODO: Half/quarter rate */
+	clock =  ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO);
 
-	for (coef_exp = 31; coef_exp > 0; coef_exp--)
-		if ((coef_scaled >> coef_exp) & 0x1)
-			break;
+	coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
+
+	/* Get exponent
+	 * ALGO: coef_exp = 14 - highest set bit position */
+	coef_exp = get_bitmask_order(coef_scaled);
 
+	/* Doesn't make sense if it's zero*/
 	if (!coef_exp)
 		return -EINVAL;
 
+	/* Note: we've shifted coef_scaled by 24 */
 	coef_exp = 14 - (coef_exp - 24);
+
+
+	/* Get mantissa (significant digits)
+	 * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
 	coef_man = coef_scaled +
 		(1 << (24 - coef_exp - 1));
+
+	/* Calculate delta slope coefficient exponent
+	 * and mantissa (remove scaling) and set them on hw */
 	ds_coef_man = coef_man >> (24 - coef_exp);
 	ds_coef_exp = coef_exp - 16;
 
@@ -90,16 +106,23 @@ static int control_rates[] =
 	{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
 
 /**
- * ath5k_hw_write_rate_duration - set rate duration during hw resets
+ * ath5k_hw_write_rate_duration - fill rate code to duration table
  *
  * @ah: the &struct ath5k_hw
  * @mode: one of enum ath5k_driver_mode
  *
- * Write the rate duration table upon hw reset. This is a helper for
- * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for
- * the hardware for the current mode for each rate. The rates which are capable
- * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another
- * register for the short preamble ACK timeout calculation.
+ * Write the rate code to duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on
+ * the hardware, based on current mode, for each rate. The rates which are
+ * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
+ * different rate code so we write their value twice (one for long preample
+ * and one for short).
+ *
+ * Note: Band doesn't matter here, if we set the values for OFDM it works
+ * on both a and g modes. So all we have to do is set values for all g rates
+ * that include all OFDM and CCK rates. If we operate in turbo or xr/half/
+ * quarter rate mode, we need to use another set of bitrates (that's why we
+ * need the mode parameter) but we don't handle these proprietary modes yet.
  */
 static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
        unsigned int mode)
@@ -275,7 +298,8 @@ commit:
 }
 
 /*
- * Bring up MAC + PHY Chips
+ * Bring up MAC + PHY Chips and program PLL
+ * TODO: Half/Quarter rate support
  */
 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 {
@@ -333,7 +357,11 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 			}
 		} else if (flags & CHANNEL_5GHZ) {
 			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
-			clock |= AR5K_PHY_PLL_40MHZ;
+
+			if (ah->ah_radio == AR5K_RF5413)
+				clock |= AR5K_PHY_PLL_40MHZ_5413;
+			else
+				clock |= AR5K_PHY_PLL_40MHZ;
 
 			if (flags & CHANNEL_OFDM)
 				mode |= AR5K_PHY_MODE_MOD_OFDM;
@@ -391,10 +419,14 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 	}
 
 	if (ah->ah_version != AR5K_AR5210) {
-		/* ...set the PHY operating mode */
-		ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
-		udelay(300);
 
+		/* ...update PLL if needed */
+		if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
+			ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+			udelay(300);
+		}
+
+		/* ...set the PHY operating mode */
 		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
 		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
 	}
@@ -403,22 +435,393 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 }
 
 /*
+ * If there is an external 32KHz crystal available, use it
+ * as ref. clock instead of 32/40MHz clock and baseband clocks
+ * to save power during sleep or restore normal 32/40MHz
+ * operation.
+ *
+ * XXX: When operating on 32KHz certain PHY registers (27 - 31,
+ * 	123 - 127) require delay on access.
+ */
+static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 scal, spending, usec32;
+
+	/* Only set 32KHz settings if we have an external
+	 * 32KHz crystal present */
+	if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
+	AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
+	enable) {
+
+		/* 1 usec/cycle */
+		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
+		/* Set up tsf increment on each cycle */
+		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
+
+		/* Set baseband sleep control registers
+		 * and sleep control rate */
+		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+			spending = 0x14;
+		else
+			spending = 0x18;
+		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+			ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
+			ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
+			ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
+			ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
+			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
+		} else {
+			ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
+			ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
+			ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
+			ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
+			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
+		}
+
+		/* Enable sleep clock operation */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+	} else {
+
+		/* Disable sleep clock operation and
+		 * restore default parameters */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
+
+		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+
+		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+			scal = AR5K_PHY_SCAL_32MHZ_2417;
+		else if (ath5k_eeprom_is_hb63(ah))
+			scal = AR5K_PHY_SCAL_32MHZ_HB63;
+		else
+			scal = AR5K_PHY_SCAL_32MHZ;
+		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+			spending = 0x14;
+		else
+			spending = 0x18;
+		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413))
+			usec32 = 39;
+		else
+			usec32 = 31;
+		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
+	}
+	return;
+}
+
+static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	u8 refclk_freq;
+
+	if ((ah->ah_radio == AR5K_RF5112) ||
+	(ah->ah_radio == AR5K_RF5413) ||
+	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+		refclk_freq = 40;
+	else
+		refclk_freq = 32;
+
+	if ((channel->center_freq % refclk_freq != 0) &&
+	((channel->center_freq % refclk_freq < 10) ||
+	(channel->center_freq % refclk_freq > 22)))
+		return true;
+	else
+		return false;
+}
+
+/* TODO: Half/Quarter rate */
+static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	if (ah->ah_version == AR5K_AR5212 &&
+	    ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+
+		/* Setup ADC control */
+		ath5k_hw_reg_write(ah,
+				(AR5K_REG_SM(2,
+				AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
+				AR5K_REG_SM(2,
+				AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
+				AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
+				AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
+				AR5K_PHY_ADC_CTL);
+
+
+
+		/* Disable barker RSSI threshold */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+				AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+			AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);
+
+		/* Set the mute mask */
+		ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+	}
+
+	/* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
+	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);
+
+	/* Enable DCU double buffering */
+	if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
+		AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+				AR5K_TXCFG_DCU_DBL_BUF_DIS);
+
+	/* Set DAC/ADC delays */
+	if (ah->ah_version == AR5K_AR5212) {
+		u32 scal;
+		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+			scal = AR5K_PHY_SCAL_32MHZ_2417;
+		else if (ath5k_eeprom_is_hb63(ah))
+			scal = AR5K_PHY_SCAL_32MHZ_HB63;
+		else
+			scal = AR5K_PHY_SCAL_32MHZ;
+		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+	}
+
+	/* Set fast ADC */
+	if ((ah->ah_radio == AR5K_RF5413) ||
+	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+		u32 fast_adc = true;
+
+		if (channel->center_freq == 2462 ||
+		channel->center_freq == 2467)
+			fast_adc = 0;
+
+		/* Only update if needed */
+		if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
+				ath5k_hw_reg_write(ah, fast_adc,
+						AR5K_PHY_FAST_ADC);
+	}
+
+	/* Fix for first revision of the RF5112 RF chipset */
+	if (ah->ah_radio == AR5K_RF5112 &&
+			ah->ah_radio_5ghz_revision <
+			AR5K_SREV_RAD_5112A) {
+		u32 data;
+		ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+				AR5K_PHY_CCKTXCTL);
+		if (channel->hw_value & CHANNEL_5GHZ)
+			data = 0xffb81020;
+		else
+			data = 0xffb80d20;
+		ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+	}
+
+	if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+		u32 usec_reg;
+		/* 5311 has different tx/rx latency masks
+		 * from 5211, since we deal 5311 the same
+		 * as 5211 when setting initvals, shift
+		 * values here to their proper locations */
+		usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
+		ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
+				AR5K_USEC_32 |
+				AR5K_USEC_TX_LATENCY_5211 |
+				AR5K_REG_SM(29,
+				AR5K_USEC_RX_LATENCY_5210)),
+				AR5K_USEC_5211);
+		/* Clear QCU/DCU clock gating register */
+		ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
+		/* Set DAC/ADC delays */
+		ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
+		/* Enable PCU FIFO corruption ECO */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+					AR5K_DIAG_SW_ECO_ENABLE);
+	}
+}
+
+static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel, u8 *ant, u8 ee_mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+
+	/* Set CCK to OFDM power delta */
+	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+		int16_t cck_ofdm_pwr_delta;
+
+		/* Adjust power delta for channel 14 */
+		if (channel->center_freq == 2484)
+			cck_ofdm_pwr_delta =
+				((ee->ee_cck_ofdm_power_delta -
+				ee->ee_scaled_cck_delta) * 2) / 10;
+		else
+			cck_ofdm_pwr_delta =
+				(ee->ee_cck_ofdm_power_delta * 2) / 10;
+
+		if (channel->hw_value == CHANNEL_G)
+			ath5k_hw_reg_write(ah,
+			AR5K_REG_SM((ee->ee_cck_ofdm_power_delta * -1),
+				AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
+			AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
+				AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
+				AR5K_PHY_TX_PWR_ADJ);
+		else
+			ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
+	}
+
+	/* Set antenna idle switch table */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
+			AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
+			(ah->ah_antenna[ee_mode][0] |
+			AR5K_PHY_ANT_CTL_TXRX_EN));
+
+	/* Set antenna switch table */
+	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+		AR5K_PHY_ANT_SWITCH_TABLE_0);
+	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+		AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+	/* Noise floor threshold */
+	ath5k_hw_reg_write(ah,
+		AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+		AR5K_PHY_NFTHRES);
+
+	if ((channel->hw_value & CHANNEL_TURBO) &&
+	(ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
+		/* Switch settling time (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+				AR5K_PHY_SETTLING_SWITCH,
+				ee->ee_switch_settling_turbo[ee_mode]);
+
+		/* Tx/Rx attenuation (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+				AR5K_PHY_GAIN_TXRX_ATTEN,
+				ee->ee_atn_tx_rx_turbo[ee_mode]);
+
+		/* ADC/PGA desired size (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_ADC,
+				ee->ee_adc_desired_size_turbo[ee_mode]);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_PGA,
+				ee->ee_pga_desired_size_turbo[ee_mode]);
+
+		/* Tx/Rx margin (Turbo) */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+				ee->ee_margin_tx_rx_turbo[ee_mode]);
+
+	} else {
+		/* Switch settling time */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+				AR5K_PHY_SETTLING_SWITCH,
+				ee->ee_switch_settling[ee_mode]);
+
+		/* Tx/Rx attenuation */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+				AR5K_PHY_GAIN_TXRX_ATTEN,
+				ee->ee_atn_tx_rx[ee_mode]);
+
+		/* ADC/PGA desired size */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_ADC,
+				ee->ee_adc_desired_size[ee_mode]);
+
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+				AR5K_PHY_DESIRED_SIZE_PGA,
+				ee->ee_pga_desired_size[ee_mode]);
+
+		/* Tx/Rx margin */
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+				ee->ee_margin_tx_rx[ee_mode]);
+	}
+
+	/* XPA delays */
+	ath5k_hw_reg_write(ah,
+		(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+		(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+		(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+		(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+	/* XLNA delay */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
+			AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
+			ee->ee_tx_end2xlna_enable[ee_mode]);
+
+	/* Thresh64 (ANI) */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
+			AR5K_PHY_NF_THRESH62,
+			ee->ee_thr_62[ee_mode]);
+
+
+	/* False detect backoff for channels
+	 * that have spur noise. Write the new
+	 * cyclic power RSSI threshold. */
+	if (ath5k_hw_chan_has_spur_noise(ah, channel))
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+				AR5K_INIT_CYCRSSI_THR1 +
+				ee->ee_false_detect[ee_mode]);
+	else
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+				AR5K_INIT_CYCRSSI_THR1);
+
+	/* I/Q correction
+	 * TODO: Per channel i/q infos ? */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+		AR5K_PHY_IQ_CORR_ENABLE |
+		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+		ee->ee_q_cal[ee_mode]);
+
+	/* Heavy clipping -disable for now */
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
+
+	return;
+}
+
+/*
  * Main reset function
  */
 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	struct ieee80211_channel *channel, bool change_channel)
 {
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	struct pci_dev *pdev = ah->ah_sc->pdev;
-	u32 data, s_seq, s_ant, s_led[3], dma_size;
-	unsigned int i, mode, freq, ee_mode, ant[2];
-	int ret;
+	u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
+	u32 phy_tst1;
+	u8 mode, freq, ee_mode, ant[2];
+	int i, ret;
 
 	ATH5K_TRACE(ah->ah_sc);
 
-	s_seq = 0;
 	s_ant = 0;
 	ee_mode = 0;
+	staid1_flags = 0;
+	tsf_up = 0;
+	tsf_lo = 0;
 	freq = 0;
 	mode = 0;
 
@@ -427,36 +830,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	 */
 	/*DCU/Antenna selection not available on 5210*/
 	if (ah->ah_version != AR5K_AR5210) {
-		if (change_channel) {
-			/* Seq number for queue 0 -do this for all queues ? */
-			s_seq = ath5k_hw_reg_read(ah,
-					AR5K_QUEUE_DFS_SEQNUM(0));
-			/*Default antenna*/
-			s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
-		}
-	}
-
-	/*GPIOs*/
-	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
-	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
-	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
-
-	/*Wakeup the device*/
-	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
-	if (ret)
-		return ret;
-
-	/*
-	 * Initialize operating mode
-	 */
-	ah->ah_op_mode = op_mode;
-
-	/*
-	 * 5111/5112 Settings
-	 * 5210 only comes with RF5110
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
 
 		switch (channel->hw_value & CHANNEL_MODES) {
 		case CHANNEL_A:
@@ -479,8 +852,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			freq = AR5K_INI_RFGAIN_5GHZ;
 			ee_mode = AR5K_EEPROM_MODE_11A;
 			break;
-		/*Is this ok on 5211 too ?*/
 		case CHANNEL_TG:
+			if (ah->ah_version == AR5K_AR5211) {
+				ATH5K_ERR(ah->ah_sc,
+					"TurboG mode not available on 5211");
+				return -EINVAL;
+			}
 			mode = AR5K_MODE_11G_TURBO;
 			freq = AR5K_INI_RFGAIN_2GHZ;
 			ee_mode = AR5K_EEPROM_MODE_11G;
@@ -501,11 +878,93 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			return -EINVAL;
 		}
 
+		if (change_channel) {
+			/*
+			 * Save frame sequence count
+			 * For revs. after Oahu, only save
+			 * seq num for DCU 0 (Global seq num)
+			 */
+			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+
+				for (i = 0; i < 10; i++)
+					s_seq[i] = ath5k_hw_reg_read(ah,
+						AR5K_QUEUE_DCU_SEQNUM(i));
+
+			} else {
+				s_seq[0] = ath5k_hw_reg_read(ah,
+						AR5K_QUEUE_DCU_SEQNUM(0));
+			}
+
+			/* TSF accelerates on AR5211 durring reset
+			 * As a workaround save it here and restore
+			 * it later so that it's back in time after
+			 * reset. This way it'll get re-synced on the
+			 * next beacon without breaking ad-hoc.
+			 *
+			 * On AR5212 TSF is almost preserved across a
+			 * reset so it stays back in time anyway and
+			 * we don't have to save/restore it.
+			 *
+			 * XXX: Since this breaks power saving we have
+			 * to disable power saving until we receive the
+			 * next beacon, so we can resync beacon timers */
+			if (ah->ah_version == AR5K_AR5211) {
+				tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+				tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+			}
+		}
+
+		/* Save default antenna */
+		s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+
+		if (ah->ah_version == AR5K_AR5212) {
+			/* Restore normal 32/40MHz clock operation
+			 * to avoid register access delay on certain
+			 * PHY registers */
+			ath5k_hw_set_sleep_clock(ah, false);
+
+			/* Since we are going to write rf buffer
+			 * check if we have any pending gain_F
+			 * optimization settings */
+			if (change_channel && ah->ah_rf_banks != NULL)
+				ath5k_hw_gainf_calibrate(ah);
+		}
 	}
 
+	/*GPIOs*/
+	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+					AR5K_PCICFG_LEDSTATE;
+	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+	/* AR5K_STA_ID1 flags, only preserve antenna
+	 * settings and ack/cts rate mode */
+	staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
+			(AR5K_STA_ID1_DEFAULT_ANTENNA |
+			AR5K_STA_ID1_DESC_ANTENNA |
+			AR5K_STA_ID1_RTS_DEF_ANTENNA |
+			AR5K_STA_ID1_ACKCTS_6MB |
+			AR5K_STA_ID1_BASE_RATE_11B |
+			AR5K_STA_ID1_SELFGEN_DEF_ANT);
+
+	/* Wakeup the device */
+	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialize operating mode
+	 */
+	ah->ah_op_mode = op_mode;
+
 	/* PHY access enable */
-	ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+	if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+	else
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
+							AR5K_PHY(0));
 
+	/* Write initial settings */
 	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
 	if (ret)
 		return ret;
@@ -514,6 +973,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	 * 5211/5212 Specific
 	 */
 	if (ah->ah_version != AR5K_AR5210) {
+
 		/*
 		 * Write initial RF gain settings
 		 * This should work for both 5111/5112
@@ -525,53 +985,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		mdelay(1);
 
 		/*
-		 * Write some more initial register settings for revised chips
+		 * Tweak initval settings for revised
+		 * chipsets and add some more config
+		 * bits
 		 */
-		if (ah->ah_version == AR5K_AR5212 &&
-		    ah->ah_phy_revision > 0x41) {
-			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
-
-			if (channel->hw_value == CHANNEL_G)
-				if (ah->ah_mac_srev < AR5K_SREV_AR2413)
-					ath5k_hw_reg_write(ah, 0x00f80d80,
-								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_AR5424)
-					ath5k_hw_reg_write(ah, 0x00380140,
-								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_AR2425)
-					ath5k_hw_reg_write(ah, 0x00fc0ec0,
-								0x994c);
-				else /* 2425 */
-					ath5k_hw_reg_write(ah, 0x00fc0fc0,
-								0x994c);
-			else
-				ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
-
-			/* Got this from legacy-hal */
-			AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200);
-
-			AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff);
-
-			/* Just write 0x9b5 ? */
-			/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
-			ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
-			ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
-			ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
-		}
-
-		/* Fix for first revision of the RF5112 RF chipset */
-		if (ah->ah_radio >= AR5K_RF5112 &&
-				ah->ah_radio_5ghz_revision <
-				AR5K_SREV_RAD_5112A) {
-			ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
-					AR5K_PHY_CCKTXCTL);
-			if (channel->hw_value & CHANNEL_5GHZ)
-				data = 0xffb81020;
-			else
-				data = 0xffb80d20;
-			ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
-			data = 0;
-		}
+		ath5k_hw_tweak_initval_settings(ah, channel);
 
 		/*
 		 * Set TX power (FIXME)
@@ -589,15 +1007,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			ath5k_hw_write_rate_duration(ah, mode);
 
 		/*
-		 * Write RF registers
+		 * Write RF buffer
 		 */
 		ret = ath5k_hw_rfregs_init(ah, channel, mode);
 		if (ret)
 			return ret;
 
-		/*
-		 * Configure additional registers
-		 */
 
 		/* Write OFDM timings on 5212*/
 		if (ah->ah_version == AR5K_AR5212 &&
@@ -619,17 +1034,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		}
 
 		/*
-		 * Set channel and calibrate the PHY
-		 */
-		ret = ath5k_hw_channel(ah, channel);
-		if (ret)
-			return ret;
-
-		/* Set antenna mode */
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
-			ah->ah_antenna[ee_mode][0], 0xfffffc06);
-
-		/*
 		 * In case a fixed antenna was set as default
 		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
 		 * registers.
@@ -644,54 +1048,16 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			ant[1] = AR5K_ANT_FIXED_B;
 		}
 
-		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
-			AR5K_PHY_ANT_SWITCH_TABLE_0);
-		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
-			AR5K_PHY_ANT_SWITCH_TABLE_1);
-
 		/* Commit values from EEPROM */
-		if (ah->ah_radio == AR5K_RF5111)
-			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
-			    AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
-
-		ath5k_hw_reg_write(ah,
-			AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
-			AR5K_PHY_NFTHRES);
-
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
-			(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
-			0xffffc07f);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
-			(ee->ee_atn_tx_rx[ee_mode] << 12) & 0x3f000,
-			0xfffc0fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
-			(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
-			((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
-			0xffff0000);
-
-		ath5k_hw_reg_write(ah,
-			(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
-			(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
-
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
-			ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
-			(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
-
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		    AR5K_PHY_IQ_CORR_ENABLE |
-		    (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		    ee->ee_q_cal[ee_mode]);
-
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
-				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
-				ee->ee_margin_tx_rx[ee_mode]);
+		ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode);
 
 	} else {
+		/*
+		 * For 5210 we do all initialization using
+		 * initvals, so we don't have to modify
+		 * any settings (5210 also only supports
+		 * a/aturbo modes)
+		 */
 		mdelay(1);
 		/* Disable phy and wait */
 		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
@@ -701,100 +1067,154 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	/*
 	 * Restore saved values
 	 */
+
 	/*DCU/Antenna selection not available on 5210*/
 	if (ah->ah_version != AR5K_AR5210) {
-		ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
+
+		if (change_channel) {
+			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+				for (i = 0; i < 10; i++)
+					ath5k_hw_reg_write(ah, s_seq[i],
+						AR5K_QUEUE_DCU_SEQNUM(i));
+			} else {
+				ath5k_hw_reg_write(ah, s_seq[0],
+					AR5K_QUEUE_DCU_SEQNUM(0));
+			}
+
+
+			if (ah->ah_version == AR5K_AR5211) {
+				ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
+				ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
+			}
+		}
+
 		ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
 	}
+
+	/* Ledstate */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+
+	/* Gpio settings */
 	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
 	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
 
+	/* Restore sta_id flags and preserve our mac address*/
+	ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
+						AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
+						AR5K_STA_ID1);
+
+
 	/*
-	 * Misc
+	 * Configure PCU
 	 */
+
+	/* Restore bssid and bssid mask */
 	/* XXX: add ah->aid once mac80211 gives this to us */
 	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
 
+	/* Set PCU config */
 	ath5k_hw_set_opmode(ah);
-	/*PISR/SISR Not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
+
+	/* Clear any pending interrupts
+	 * PISR/SISR Not available on 5210 */
+	if (ah->ah_version != AR5K_AR5210)
 		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
-		/* If we later allow tuning for this, store into sc structure */
-		data = AR5K_TUNE_RSSI_THRES |
-			AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
-		ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
+
+	/* Set RSSI/BRSSI thresholds
+	 *
+	 * Note: If we decide to set this value
+	 * dynamicaly, have in mind that when AR5K_RSSI_THR
+	 * register is read it might return 0x40 if we haven't
+	 * wrote anything to it plus BMISS RSSI threshold is zeroed.
+	 * So doing a save/restore procedure here isn't the right
+	 * choice. Instead store it on ath5k_hw */
+	ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
+				AR5K_TUNE_BMISS_THRES <<
+				AR5K_RSSI_THR_BMISS_S),
+				AR5K_RSSI_THR);
+
+	/* MIC QoS support */
+	if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
+		ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
+		ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
+	}
+
+	/* QoS NOACK Policy */
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
+			AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET)  |
+			AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
+			AR5K_QOS_NOACK);
 	}
 
+
 	/*
-	 * Set Rx/Tx DMA Configuration
-	 *
-	 * Set maximum DMA size (512) except for PCI-E cards since
-	 * it causes rx overruns and tx errors (tested on 5424 but since
-	 * rx overruns also occur on 5416/5418 with madwifi we set 128
-	 * for all PCI-E cards to be safe).
-	 *
-	 * In dumps this is 128 for allchips.
-	 *
-	 * XXX: need to check 5210 for this
-	 * TODO: Check out tx triger level, it's always 64 on dumps but I
-	 * guess we can tweak it and see how it goes ;-)
+	 * Configure PHY
 	 */
-	dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
-	if (ah->ah_version != AR5K_AR5210) {
-		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
-			AR5K_TXCFG_SDMAMR, dma_size);
-		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
-			AR5K_RXCFG_SDMAMW, dma_size);
-	}
+
+	/* Set channel on PHY */
+	ret = ath5k_hw_channel(ah, channel);
+	if (ret)
+		return ret;
 
 	/*
 	 * Enable the PHY and wait until completion
+	 * This includes BaseBand and Synthesizer
+	 * activation.
 	 */
 	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
 
 	/*
 	 * On 5211+ read activation -> rx delay
 	 * and use it.
+	 *
+	 * TODO: Half/quarter rate support
 	 */
 	if (ah->ah_version != AR5K_AR5210) {
-		data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+		u32 delay;
+		delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
 			AR5K_PHY_RX_DELAY_M;
-		data = (channel->hw_value & CHANNEL_CCK) ?
-			((data << 2) / 22) : (data / 10);
+		delay = (channel->hw_value & CHANNEL_CCK) ?
+			((delay << 2) / 22) : (delay / 10);
 
-		udelay(100 + (2 * data));
-		data = 0;
+		udelay(100 + (2 * delay));
 	} else {
 		mdelay(1);
 	}
 
 	/*
-	 * Perform ADC test (?)
+	 * Perform ADC test to see if baseband is ready
+	 * Set tx hold and check adc test register
 	 */
-	data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+	phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
 	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
 	for (i = 0; i <= 20; i++) {
 		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
 			break;
 		udelay(200);
 	}
-	ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
-	data = 0;
+	ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
 
 	/*
-	 * Start automatic gain calibration
+	 * Start automatic gain control calibration
 	 *
 	 * During AGC calibration RX path is re-routed to
-	 * a signal detector so we don't receive anything.
+	 * a power detector so we don't receive anything.
 	 *
 	 * This method is used to calibrate some static offsets
 	 * used together with on-the fly I/Q calibration (the
 	 * one performed via ath5k_hw_phy_calibrate), that doesn't
 	 * interrupt rx path.
 	 *
+	 * While rx path is re-routed to the power detector we also
+	 * start a noise floor calibration, to measure the
+	 * card's noise floor (the noise we measure when we are not
+	 * transmiting or receiving anything).
+	 *
 	 * If we are in a noisy environment AGC calibration may time
-	 * out.
+	 * out and/or noise floor calibration might timeout.
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
 				AR5K_PHY_AGCCTL_CAL);
@@ -816,30 +1236,37 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			AR5K_PHY_AGCCTL_CAL, 0, false)) {
 		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
 			channel->center_freq);
-		return -EAGAIN;
 	}
 
 	/*
-	 * Start noise floor calibration
-	 *
 	 * If we run NF calibration before AGC, it always times out.
 	 * Binary HAL starts NF and AGC calibration at the same time
-	 * and only waits for AGC to finish. I believe that's wrong because
-	 * during NF calibration, rx path is also routed to a detector, so if
-	 * it doesn't finish we won't have RX.
-	 *
-	 * XXX: Find an interval that's OK for all cards...
+	 * and only waits for AGC to finish. Also if AGC or NF cal.
+	 * times out, reset doesn't fail on binary HAL. I believe
+	 * that's wrong because since rx path is routed to a detector,
+	 * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
+	 * enables noise floor calibration after offset calibration and if noise
+	 * floor calibration fails, reset fails. I believe that's
+	 * a better approach, we just need to find a polling interval
+	 * that suits best, even if reset continues we need to make
+	 * sure that rx path is ready.
 	 */
 	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
 
+
+	/*
+	 * Configure QCUs/DCUs
+	 */
+
+	/* TODO: HW Compression support for data queues */
+	/* TODO: Burst prefetch for data queues */
+
 	/*
 	 * Reset queues and start beacon timers at the end of the reset routine
+	 * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
+	 * Note: If we want we can assign multiple qcus on one dcu.
 	 */
 	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
-		/*No QCU on 5210*/
-		if (ah->ah_version != AR5K_AR5210)
-			AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
-
 		ret = ath5k_hw_reset_tx_queue(ah, i);
 		if (ret) {
 			ATH5K_ERR(ah->ah_sc,
@@ -848,14 +1275,40 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		}
 	}
 
+
+	/*
+	 * Configure DMA/Interrupts
+	 */
+
+	/*
+	 * Set Rx/Tx DMA Configuration
+	 *
+	 * Set standard DMA size (128). Note that
+	 * a DMA size of 512 causes rx overruns and tx errors
+	 * on pci-e cards (tested on 5424 but since rx overruns
+	 * also occur on 5416/5418 with madwifi we set 128
+	 * for all PCI-E cards to be safe).
+	 *
+	 * XXX: need to check 5210 for this
+	 * TODO: Check out tx triger level, it's always 64 on dumps but I
+	 * guess we can tweak it and see how it goes ;-)
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+			AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
+		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+			AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
+	}
+
 	/* Pre-enable interrupts on 5211/5212*/
 	if (ah->ah_version != AR5K_AR5210)
 		ath5k_hw_set_imr(ah, ah->ah_imr);
 
 	/*
-	 * Set RF kill flags if supported by the device (read from the EEPROM)
-	 * Disable gpio_intr for now since it results system hang.
-	 * TODO: Handle this in ath5k_intr
+	 * Setup RFKill interrupt if rfkill flag is set on eeprom.
+	 * TODO: Use gpio pin and polarity infos from eeprom
+	 * TODO: Handle this in ath5k_intr because it'll result
+	 * 	 a nasty interrupt storm.
 	 */
 #if 0
 	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
@@ -868,33 +1321,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	}
 #endif
 
-	/*
-	 * Set the 32MHz reference clock on 5212 phy clock sleep register
-	 *
-	 * TODO: Find out how to switch to external 32Khz clock to save power
-	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
-		ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
-
-		data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
-		data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
-						0x00000f80 : 0x00001380 ;
-		ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
-		data = 0;
-	}
-
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
-		ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
-		ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
-		if (ah->ah_mac_srev >= AR5K_SREV_AR2413)
-			ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
-	}
+	/* Enable 32KHz clock function for AR5212+ chips
+	 * Set clocks to 32KHz operation and use an
+	 * external 32KHz crystal when sleeping if one
+	 * exists */
+	if (ah->ah_version == AR5K_AR5212)
+			ath5k_hw_set_sleep_clock(ah, true);
 
 	/*
 	 * Disable beacons and reset the register