aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.osdl.org>2006-12-01 16:38:18 -0800
committerLinus Torvalds <torvalds@woody.osdl.org>2006-12-01 16:38:18 -0800
commit1399ff54741b3aa0aaf5097b8559fa30277ebe61 (patch)
treeb384aef82007144b067cc171d2a9aa168b50b262 /drivers
parentbb37b94c68e7b37eecea8576039ae9396ca07839 (diff)
parent6b44d4e69c6144d0df71ab47ec90d2009237d48f (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Fix typos in drivers/isdn/hisax/isdnl2.c Fix typos in doc and comments BUG_ON conversion for fs/aio.c BUG_ON conversion for drivers/mmc/omap.c BUG_ON conversion for drivers/media/video/pwc/pwc-if.c Fix misc .c/.h comment typos Fix misc Kconfig typos Fix typos in /Documentation : Misc Fix typos in /Documentation : 'U-Z' Fix typos in /Documentation : 'T'' Fix jiffies.h comment tabify MAINTAINERS fix spelling error in include/linux/kernel.h mqueue.h: don't include linux/types.h
Diffstat (limited to 'drivers')
-rw-r--r--drivers/atm/iphase.c2
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/char/rio/riocmd.c2
-rw-r--r--drivers/char/rio/rioinit.c2
-rw-r--r--drivers/char/rio/rioparam.c6
-rw-r--r--drivers/ide/ide-floppy.c2
-rw-r--r--drivers/isdn/hardware/eicon/os_4bri.c2
-rw-r--r--drivers/isdn/hisax/hfc4s8s_l1.h2
-rw-r--r--drivers/isdn/hisax/isdnl2.c20
-rw-r--r--drivers/media/dvb/ttpci/budget-patch.c8
-rw-r--r--drivers/media/video/Kconfig2
-rw-r--r--drivers/media/video/pwc/pwc-if.c3
-rw-r--r--drivers/message/fusion/mptbase.c2
-rw-r--r--drivers/mmc/omap.c3
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/maps/cfi_flagadm.c2
-rw-r--r--drivers/net/Kconfig4
-rw-r--r--drivers/net/e100.c2
-rw-r--r--drivers/net/e1000/e1000_hw.c2
-rw-r--r--drivers/net/phy/Kconfig4
-rw-r--r--drivers/net/sk98lin/h/skdrv2nd.h2
-rw-r--r--drivers/net/sk98lin/skdim.c4
-rw-r--r--drivers/net/wireless/ipw2200.c4
-rw-r--r--drivers/parisc/ccio-dma.c2
-rw-r--r--drivers/parisc/iosapic.c6
-rw-r--r--drivers/pci/Kconfig4
-rw-r--r--drivers/pci/hotplug/ibmphp_hpc.c2
-rw-r--r--drivers/s390/net/claw.h2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_reg_def.h2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_sds.c4
-rw-r--r--drivers/scsi/ncr53c8xx.c14
-rw-r--r--drivers/scsi/ncr53c8xx.h6
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/u132-hcd.c6
-rw-r--r--drivers/usb/misc/usb_u132.h2
-rw-r--r--drivers/usb/serial/digi_acceleport.c2
37 files changed, 69 insertions, 71 deletions
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 9ed1c60048f..bb7ef570514 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -305,7 +305,7 @@ static void clear_lockup (struct atm_vcc *vcc, IADEV *dev) {
** | R | NZ | 5-bit exponent | 9-bit mantissa |
** +----+----+------------------+-------------------------------+
**
-** R = reserverd (written as 0)
+** R = reserved (written as 0)
** NZ = 0 if 0 cells/sec; 1 otherwise
**
** if NZ = 1, rate = 1.mmmmmmmmm x 2^(eeeee) cells/sec
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 2af12fc4511..ad8b537ad47 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -994,7 +994,7 @@ config HPET
help
If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
open selects one of the timers supported by the HPET. The timers are
- non-periodioc and/or periodic.
+ non-periodic and/or periodic.
config HPET_RTC_IRQ
bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c
index 4df6ab2206a..167ebc84e8d 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/char/rio/riocmd.c
@@ -922,7 +922,7 @@ int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP)
**
** Packet is an actual packet structure to be filled in with the packet
** information associated with the command. You need to fill in everything,
-** as the command processore doesn't process the command packet in any way.
+** as the command processor doesn't process the command packet in any way.
**
** The PreFuncP is called before the packet is enqueued on the host rup.
** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must
diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c
index 99f3df02b61..0794844369d 100644
--- a/drivers/char/rio/rioinit.c
+++ b/drivers/char/rio/rioinit.c
@@ -222,7 +222,7 @@ int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, i
** which value will be written into memory.
** Call with op set to zero means that the RAM will not be read and checked
** before it is written.
-** Call with op not zero, and the RAM will be read and compated with val[op-1]
+** Call with op not zero and the RAM will be read and compared with val[op-1]
** to check that the data from the previous phase was retained.
*/
diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c
index 1066d976070..bb498d24adc 100644
--- a/drivers/char/rio/rioparam.c
+++ b/drivers/char/rio/rioparam.c
@@ -87,8 +87,8 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3";
** command bit set onto the port. The command bit is in the len field,
** and gets ORed in with the actual byte count.
**
-** When you send a packet with the command bit set, then the first
-** data byte ( data[0] ) is interpretted as the command to execute.
+** When you send a packet with the command bit set the first
+** data byte (data[0]) is interpreted as the command to execute.
** It also governs what data structure overlay should accompany the packet.
** Commands are defined in cirrus/cirrus.h
**
@@ -103,7 +103,7 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3";
**
** Most commands do not use the remaining bytes in the data array. The
** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and
-** OPEN are currently analagous). With these three commands the following
+** OPEN are currently analogous). With these three commands the following
** 11 data bytes are all used to pass config information such as baud rate etc.
** The fields are also defined in cirrus.h. Some contain straightforward
** information such as the transmit XON character. Two contain the transmit and
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 8ccee9c769f..e3a267622bb 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1635,7 +1635,7 @@ static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg)
/*
** Get ATAPI_FORMAT_UNIT progress indication.
**
-** Userland gives a pointer to an int. The int is set to a progresss
+** Userland gives a pointer to an int. The int is set to a progress
** indicator 0-65536, with 65536=100%.
**
** If the drive does not support format progress indication, we just check
diff --git a/drivers/isdn/hardware/eicon/os_4bri.c b/drivers/isdn/hardware/eicon/os_4bri.c
index 11e6f937c1e..7b4ec3f60db 100644
--- a/drivers/isdn/hardware/eicon/os_4bri.c
+++ b/drivers/isdn/hardware/eicon/os_4bri.c
@@ -464,7 +464,7 @@ int diva_4bri_init_card(diva_os_xdi_adapter_t * a)
/*
** Cleanup function will be called for master adapter only
-** this is garanteed by design: cleanup callback is set
+** this is guaranteed by design: cleanup callback is set
** by master adapter only
*/
static int diva_4bri_cleanup_adapter(diva_os_xdi_adapter_t * a)
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.h b/drivers/isdn/hisax/hfc4s8s_l1.h
index e8f9c077fa8..9d5d2a56b4e 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.h
+++ b/drivers/isdn/hisax/hfc4s8s_l1.h
@@ -16,7 +16,7 @@
/*
* include Genero generated HFC-4S/8S header file hfc48scu.h
-* for comlete register description. This will define _HFC48SCU_H_
+* for complete register description. This will define _HFC48SCU_H_
* to prevent redefinitions
*/
diff --git a/drivers/isdn/hisax/isdnl2.c b/drivers/isdn/hisax/isdnl2.c
index 6d043172555..cd3b5ad5349 100644
--- a/drivers/isdn/hisax/isdnl2.c
+++ b/drivers/isdn/hisax/isdnl2.c
@@ -1442,7 +1442,7 @@ l2_tei_remove(struct FsmInst *fi, int event, void *arg)
}
static void
-l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st14_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct PStack *st = fi->userdata;
@@ -1453,7 +1453,7 @@ l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg)
}
static void
-l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st5_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct PStack *st = fi->userdata;
@@ -1466,7 +1466,7 @@ l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg)
}
static void
-l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st6_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct PStack *st = fi->userdata;
@@ -1477,7 +1477,7 @@ l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg)
}
static void
-l2_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_persistent_da(struct FsmInst *fi, int event, void *arg)
{
struct PStack *st = fi->userdata;
@@ -1612,14 +1612,14 @@ static struct FsmNode L2FnList[] __initdata =
{ST_L2_6, EV_L2_FRAME_ERROR, l2_frame_error},
{ST_L2_7, EV_L2_FRAME_ERROR, l2_frame_error_reest},
{ST_L2_8, EV_L2_FRAME_ERROR, l2_frame_error_reest},
- {ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistant_da},
+ {ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistent_da},
{ST_L2_2, EV_L1_DEACTIVATE, l2_st24_tei_remove},
{ST_L2_3, EV_L1_DEACTIVATE, l2_st3_tei_remove},
- {ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistant_da},
- {ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistant_da},
- {ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistant_da},
- {ST_L2_7, EV_L1_DEACTIVATE, l2_persistant_da},
- {ST_L2_8, EV_L1_DEACTIVATE, l2_persistant_da},
+ {ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistent_da},
+ {ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistent_da},
+ {ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistent_da},
+ {ST_L2_7, EV_L1_DEACTIVATE, l2_persistent_da},
+ {ST_L2_8, EV_L1_DEACTIVATE, l2_persistent_da},
};
#define L2_FN_COUNT (sizeof(L2FnList)/sizeof(struct FsmNode))
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index fc1267b8c89..9a155396d6a 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
/* New design (By Emard)
** this rps1 code will copy internal HS event to GPIO3 pin.
-** GPIO3 is in budget-patch hardware connectd to port B VSYNC
+** GPIO3 is in budget-patch hardware connected to port B VSYNC
** HS is an internal event of 7146, accessible with RPS
** and temporarily raised high every n lines
** (n in defined in the RPS_THRESH1 counter threshold)
** I think HS is raised high on the beginning of the n-th line
** and remains high until this n-th line that triggered
-** it is completely received. When the receiption of n-th line
+** it is completely received. When the reception of n-th line
** ends, HS is lowered.
** To transmit data over DMA, 7146 needs changing state at
@@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
** hardware debug note: a working budget card (including budget patch)
** with vpeirq() interrupt setup in mode "0x90" (every 64K) will
** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
-** and that means 3*25=75 Hz of interrupt freqency, as seen by
+** and that means 3*25=75 Hz of interrupt frequency, as seen by
** watch cat /proc/interrupts
**
** If this frequency is 3x lower (and data received in the DMA
@@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
** this means VSYNC line is not connected in the hardware.
** (check soldering pcb and pins)
** The same behaviour of missing VSYNC can be duplicated on budget
-** cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
+** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
*/
// Setup RPS1 "program" (p35)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bf267552941..b8fde5cf473 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO
decode audio/video standards. This option will autoselect
all pertinent modules to each selected video module.
- Unselect this only if you know exaclty what you are doing, since
+ Unselect this only if you know exactly what you are doing, since
it may break support on some boards.
In doubt, say Y.
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 46c11483088..e8db6e58d39 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -1095,8 +1095,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev);
pdev = (struct pwc_device *)vdev->priv;
- if (pdev == NULL)
- BUG();
+ BUG_ON(!pdev);
if (pdev->vopen) {
PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n");
return -EBUSY;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index e5c72719deb..051b7c5b8f0 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -6185,7 +6185,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
"Abort", /* 12h */
"IO Not Yet Executed", /* 13h */
"IO Executed", /* 14h */
- "Persistant Reservation Out Not Affiliation Owner", /* 15h */
+ "Persistent Reservation Out Not Affiliation Owner", /* 15h */
"Open Transmit DMA Abort", /* 16h */
"IO Device Missing Delay Retry", /* 17h */
NULL, /* 18h */
diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c
index 762fa289589..d593ef342e7 100644
--- a/drivers/mmc/omap.c
+++ b/drivers/mmc/omap.c
@@ -640,8 +640,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
}
/* Max limit for DMA frame count is 0xffff */
- if (unlikely(count > 0xffff))
- BUG();
+ BUG_ON(count > 0xffff);
OMAP_MMC_WRITE(host->base, BUF, buf);
omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16,
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 24747bdc3e1..d132ed571f1 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE
default "4"
config MTD_SHARP_SL
- bool "ROM maped on Sharp SL Series"
+ bool "ROM mapped on Sharp SL Series"
depends on MTD && ARCH_PXA
help
This enables access to the flash chip on the Sharp SL Series of PDAs.
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index 92b5d883d7b..65e5ee55201 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -80,7 +80,7 @@ struct mtd_partition flagadm_parts[] = {
.size = FLASH_PARTITION2_SIZE
},
{
- .name = "Persistant storage",
+ .name = "Persistent storage",
.offset = FLASH_PARTITION3_ADDR,
.size = FLASH_PARTITION3_SIZE
}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6e863aa9894..b6c70c58ae9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -32,7 +32,7 @@ config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
---help---
- This is an intermidiate driver that allows sharing of
+ This is an intermediate driver that allows sharing of
resources.
To compile this driver as a module, choose M here: the module
will be called ifb. If you want to use more than one ifb
@@ -2136,7 +2136,7 @@ config SK98LIN
This driver supports the original Yukon chipset. A cleaner driver is
also available (skge) which seems to work better than this one.
- This driver does not support the newer Yukon2 chipset. A seperate
+ This driver does not support the newer Yukon2 chipset. A separate
driver, sky2, is provided to support Yukon2-based adapters.
The following adapters are supported by this driver:
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 19ab3441269..3a8df479cbd 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1215,7 +1215,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb
* the literal in the instruction before the code is loaded, the
* driver can change the algorithm.
*
-* INTDELAY - This loads the dead-man timer with its inital value.
+* INTDELAY - This loads the dead-man timer with its initial value.
* When this timer expires the interrupt is asserted, and the
* timer is reset each time a new packet is received. (see
* BUNDLEMAX below to set the limit on number of chained packets)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 65077f39da6..796c4f7d426 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -3868,7 +3868,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*
-* Sets bit 15 of the MII Control regiser
+* Sets bit 15 of the MII Control register
******************************************************************************/
int32_t
e1000_phy_reset(struct e1000_hw *hw)
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index b79ec0d7480..ecb61f876f2 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -61,8 +61,8 @@ config FIXED_PHY
depends on PHYLIB
---help---
Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
- but with the ability to manipulate with speed/link in software. The relavant MII
- speed/duplex parameters could be effectively handled in user-specified fuction.
+ but with the ability to manipulate the speed/link in software. The relevant MII
+ speed/duplex parameters could be effectively handled in a user-specified function.
Currently tested with mpc866ads.
config FIXED_MII_10_FDX
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
index 778d9e618eb..3fa67171e83 100644
--- a/drivers/net/sk98lin/h/skdrv2nd.h
+++ b/drivers/net/sk98lin/h/skdrv2nd.h
@@ -160,7 +160,7 @@ struct s_IOCTL {
/*
** Interim definition of SK_DRV_TIMER placed in this file until
-** common modules have boon finallized
+** common modules have been finalized
*/
#define SK_DRV_TIMER 11
#define SK_DRV_MODERATION_TIMER 1
diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c
index 07c1b4c8699..37ce03fb8de 100644
--- a/drivers/net/sk98lin/skdim.c
+++ b/drivers/net/sk98lin/skdim.c
@@ -252,7 +252,7 @@ SkDimEnableModerationIfNeeded(SK_AC *pAC) {
/*******************************************************************************
** Function : SkDimDisplayModerationSettings
-** Description : Displays the current settings regaring interrupt moderation
+** Description : Displays the current settings regarding interrupt moderation
** Programmer : Ralph Roesler
** Last Modified: 22-mar-03
** Returns : void (!)
@@ -510,7 +510,7 @@ EnableIntMod(SK_AC *pAC) {
/*******************************************************************************
** Function : DisableIntMod()
-** Description : Disbles the interrupt moderation independent of what inter-
+** Description : Disables the interrupt moderation independent of what inter-
** rupts are running or not
** Programmer : Ralph Roesler
** Last Modified: 23-mar-03
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 1f742814a01..72120d5c2f7 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -6920,8 +6920,8 @@ static int ipw_qos_association(struct ipw_priv *priv,
}
/*
-* handling the beaconing responces. if we get different QoS setting
-* of the network from the the associated setting adjust the QoS
+* handling the beaconing responses. if we get different QoS setting
+* off the network from the associated setting, adjust the QoS
* setting
*/
static int ipw_qos_association_resp(struct ipw_priv *priv,
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 68cb3a08005..fe3f5f5365c 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -486,7 +486,7 @@ typedef unsigned long space_t;
** This bit tells U2 to do R/M/W for partial cachelines. "Streaming"
** data can avoid this if the mapping covers full cache lines.
** o STOP_MOST is needed for atomicity across cachelines.
-** Apperently only "some EISA devices" need this.
+** Apparently only "some EISA devices" need this.
** Using CONFIG_ISA is hack. Only the IOA with EISA under it needs
** to use this hint iff the EISA devices needs this feature.
** According to the U2 ERS, STOP_MOST enabled pages hurt performance.
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index c2949b4367e..12bab64a62a 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -50,12 +50,12 @@
**
** PA Firmware
** -----------
-** PA-RISC platforms have two fundementally different types of firmware.
+** PA-RISC platforms have two fundamentally different types of firmware.
** For PCI devices, "Legacy" PDC initializes the "INTERRUPT_LINE" register
** and BARs similar to a traditional PC BIOS.
** The newer "PAT" firmware supports PDC calls which return tables.
-** PAT firmware only initializes PCI Console and Boot interface.
-** With these tables, the OS can progam all other PCI devices.
+** PAT firmware only initializes the PCI Console and Boot interface.
+** With these tables, the OS can program all other PCI devices.
**
** One such PAT PDC call returns the "Interrupt Routing Table" (IRT).
** The IRT maps each PCI slot's INTA-D "output" line to an I/O SAPIC
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 5f1b9f58070..3cfb0a3575e 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -27,14 +27,14 @@ config PCI_MULTITHREAD_PROBE
smaller speedup on single processor machines.
But it can also cause lots of bad things to happen. A number
- of PCI drivers can not properly handle running in this way,
+ of PCI drivers cannot properly handle running in this way,
some will just not work properly at all, while others might
decide to blow up power supplies with a huge load all at once,
so use this option at your own risk.
It is very unwise to use this option if you are not using a
boot process that can handle devices being created in any
- order. A program that can create persistant block and network
+ order. A program that can create persistent block and network
device names (like udev) is a good idea if you wish to use
this option.
diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
index c3ac98a0a6a..f55ac3885cb 100644
--- a/drivers/pci/hotplug/ibmphp_hpc.c
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -531,7 +531,7 @@ static u8 hpc_readcmdtoindex (u8 cmd, u8 index)
*
* Action: issue a READ command to HPC
*
-* Input: pslot - can not be NULL for READ_ALLSTAT
+* Input: pslot - cannot be NULL for READ_ALLSTAT
* pstatus - can be NULL for READ_ALLSTAT
*
* Return 0 or error codes
diff --git a/drivers/s390/net/claw.h b/drivers/s390/net/claw.h
index 969be465309..1ee9a6f0654 100644
--- a/drivers/s390/net/claw.h
+++ b/drivers/s390/net/claw.h
@@ -29,7 +29,7 @@
#define CLAW_COMPLETE 0xff /* flag to indicate i/o completed */
/*-----------------------------------------------------*
-* CLAW control comand code *
+* CLAW control command code *
*------------------------------------------------------*/
#define SYSTEM_VALIDATE_REQUEST 0x01 /* System Validate request */
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index b79f45f3ad4..a11f4e6d8bd 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -2000,7 +2000,7 @@
* The host accesses this scratch in a different manner from the
* central sequencer. The sequencer has to use CSEQ registers CSCRPAGE
* and CMnSCRPAGE to access the scratch memory. A flat mapping of the
- * scratch memory is avaliable for software convenience and to prevent
+ * scratch memory is available for software convenience and to prevent
* corruption while the sequencer is running. This memory is mapped
* onto addresses 800h - BFFh, total of 400h bytes.
*
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
index de7c04d4254..e5a0ec37e95 100644
--- a/drivers/scsi/aic94xx/aic94xx_sds.c
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -64,7 +64,7 @@ struct asd_ocm_dir {
#define OCM_INIT_DIR_ENTRIES 5
/***************************************************************************
-* OCM dircetory default
+* OCM directory default
***************************************************************************/
static struct asd_ocm_dir OCMDirInit =
{
@@ -73,7 +73,7 @@ static struct asd_ocm_dir OCMDirInit =
};
/***************************************************************************
-* OCM dircetory Entries default
+* OCM directory Entries default
***************************************************************************/
static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] =
{
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 6cc2bc2f62b..adb8eb4f5fd 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -185,7 +185,7 @@ static inline struct list_head *ncr_list_pop(struct list_head *head)
** power of 2 cache line size.
** Enhanced in linux-2.3.44 to provide a memory pool
** per pcidev to support dynamic dma mapping. (I would
-** have preferred a real bus astraction, btw).
+** have preferred a real bus abstraction, btw).
**
**==========================================================
*/
@@ -1438,7 +1438,7 @@ struct head {
** The first four bytes (scr_st[4]) are used inside the script by
** "COPY" commands.
** Because source and destination must have the same alignment
-** in a DWORD, the fields HAVE to be at the choosen offsets.
+** in a DWORD, the fields HAVE to be at the chosen offsets.
** xerr_st 0 (0x34) scratcha
** sync_st 1 (0x05) sxfer
** wide_st 3 (0x03) scntl3
@@ -1498,7 +1498,7 @@ struct head {
** the DSA (data structure address) register points
** to this substructure of the ccb.
** This substructure contains the header with
-** the script-processor-changable data and
+** the script-processor-changeable data and
** data blocks for the indirect move commands.
**
**----------------------------------------------------------
@@ -5107,7 +5107,7 @@ void ncr_complete (struct ncb *np, struct ccb *cp)
/*
** This CCB has been skipped by the NCR.
-** Queue it in the correponding unit queue.
+** Queue it in the corresponding unit queue.
*/
static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp)
{
@@ -5896,8 +5896,8 @@ static void ncr_log_hard_error(struct ncb *np, u16 sist, u_char dstat)
**
** In normal cases, interrupt conditions occur one at a
** time. The ncr is able to stack in some extra registers
-** other interrupts that will occurs after the first one.
-** But severall interrupts may occur at the same time.
+** other interrupts that will occur after the first one.
+** But, several interrupts may occur at the same time.
**
** We probably should only try to deal with the normal
** case, but it seems that multiple interrupts occur in
@@ -6796,7 +6796,7 @@ void ncr_int_sir (struct ncb *np)
** The host status field is set to HS_NEGOTIATE to mark this
** situation.
**
-** If the target doesn't answer this message immidiately
+** If the target doesn't answer this message immediately
** (as required by the standard), the SIR_NEGO_FAIL interrupt
** will be raised eventually.
** The handler removes the HS_NEGOTIATE status, and sets the
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
index cb8b7701431..b39357d9af8 100644
--- a/drivers/scsi/ncr53c8xx.h
+++ b/drivers/scsi/ncr53c8xx.h
@@ -218,7 +218,7 @@
** Same as option 1, but also deal with
** misconfigured interrupts.
**
-** - Edge triggerred instead of level sensitive.
+** - Edge triggered instead of level sensitive.
** - No interrupt line connected.
** - IRQ number misconfigured.
**
@@ -549,7 +549,7 @@ struct ncr_driver_setup {
/*
** Initial setup.
-** Can be overriden at startup by a command line.
+** Can be overridden at startup by a command line.
*/
#define SCSI_NCR_DRIVER_SETUP \
{ \
@@ -1093,7 +1093,7 @@ struct scr_tblsel {
**-----------------------------------------------------------
** On 810A, 860, 825A, 875, 895 and 896 chips the content
** of SFBR register can be used as data (SCR_SFBR_DATA).
-** The 896 has additionnal IO registers starting at
+** The 896 has additional IO registers starting at
** offset 0x80. Bit 7 of register offset is stored in
** bit 7 of the SCRIPTS instruction first DWORD.
**-----------------------------------------------------------
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 23334c8bc4c..d895a1adb42 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -16,7 +16,7 @@ config SPI
controller and a chipselect. Most SPI slaves don't support
dynamic device discovery; some are even write-only or read-only.
- SPI is widely used by microcontollers to talk with sensors,
+ SPI is widely used by microcontrollers to talk with sensors,
eeprom and flash memory, codecs and various other controller
chips, analog to digital (and d-to-a) converters, and more.
MMC and SD cards can be accessed using SPI protocol; and for
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc98f8..cc60759083b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_U132_HCD
adapter will *NOT* work with PC cards that do not contain an OHCI
controller.
- For those PC cards that contain multiple OHCI controllers only ther
+ For those PC cards that contain multiple OHCI controllers only the
first one is used.
The driver consists of two modules, the "ftdi-elan" module is a
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 32c635ecbf3..a00d1595656 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -211,7 +211,7 @@ int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs,
int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs,
u8 width, u32 data);
/*
-* these can not be inlines because we need the structure offset!!
+* these cannot be inlines because we need the structure offset!!
* Does anyone have a better way?????
*/
#define u132_read_pcimem(u132, member, data) \
@@ -3045,7 +3045,7 @@ static struct hc_driver u132_hc_driver = {
* This function may be called by the USB core whilst the "usb_all_devices_rwsem"
* is held for writing, thus this module must not call usb_remove_hcd()
* synchronously - but instead should immediately stop activity to the
-* device and ansynchronously call usb_remove_hcd()
+* device and asynchronously call usb_remove_hcd()
*/
static int __devexit u132_remove(struct platform_device *pdev)
{
@@ -3241,7 +3241,7 @@ static int u132_resume(struct platform_device *pdev)
#define u132_resume NULL
#endif
/*
-* this driver is loaded explicitely by ftdi_u132
+* this driver is loaded explicitly by ftdi_u132
*
* the platform_driver struct is static because it is per type of module
*/
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
index 551ba8906d6..5b5a3e621da 100644
--- a/drivers/usb/misc/usb_u132.h
+++ b/drivers/usb/misc/usb_u132.h
@@ -52,7 +52,7 @@
* the kernel to load the "u132-hcd" module.
*
* The "ftdi-u132" module provides the interface to the inserted
-* PC card and the "u132-hcd" module uses the API to send and recieve
+* PC card and the "u132-hcd" module uses the API to send and receive
* data. The API features call-backs, so that part of the "u132-hcd"
* module code will run in the context of one of the kernel threads
* of the "ftdi-u132" module.
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index bdb58100fc1..5e3ac281a2f 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -157,7 +157,7 @@
* to TASK_RUNNING will be lost and write_chan's subsequent call to
* schedule() will never return (unless it catches a signal).
* This race condition occurs because write_bulk_callback() (and thus
-* the wakeup) are called asynchonously from an interrupt, rather than
+* the wakeup) are called asynchronously from an interrupt, rather than
* from the scheduler. We can avoid the race by calling the wakeup
* from the scheduler queue and that's our fix: Now, at the end of
* write_bulk_callback() we queue up a wakeup call on the scheduler