diff options
| author | James Bottomley <jejb@mulgrave.(none)> | 2005-10-29 10:01:24 -0500 |
|---|---|---|
| committer | James Bottomley <jejb@mulgrave.(none)> | 2005-10-29 10:01:24 -0500 |
| commit | ca61f10ab2b874b889e89d14ea09fae2dcccdca6 (patch) | |
| tree | d4e7316a7d30dceb1d0eda442426431d9e2274d0 /drivers | |
| parent | 80e23babfcf21a2dc726d3be00e06993f02f0274 (diff) | |
[SCSI] remove broken driver cpqfc
Hopefully there should be a brand new replacement driver for this heap
of junk by the beginning of next year.
Acked By: Martin K. Petersen <mkp@mkp.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 3 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTS.h | 19 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTSchip.h | 238 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTScontrol.c | 2231 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTSi2c.c | 493 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTSinit.c | 2096 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTSioctl.h | 94 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTSstructs.h | 1530 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTStrigger.c | 33 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTStrigger.h | 8 | ||||
| -rw-r--r-- | drivers/scsi/cpqfcTSworker.c | 6516 |
12 files changed, 0 insertions, 13274 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 78c33180ebe..afeca325b4d 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -620,19 +620,6 @@ config SCSI_OMIT_FLASHPOINT substantial, so users of MultiMaster Host Adapters may wish to omit it. -# -# This is marked broken because it uses over 4kB of stack in -# just two routines: -# 2076 CpqTsProcessIMQEntry -# 2052 PeekIMQEntry -# -config SCSI_CPQFCTS - tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support" - depends on PCI && SCSI && BROKEN - help - Say Y here to compile in support for the Compaq StorageWorks Fibre - Channel 64-bit/66Mhz Host Bus Adapter. - config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 8dfb9884afe..b88b8c45559 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -120,7 +120,6 @@ obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o obj-$(CONFIG_SCSI_FCAL) += fcal.o -obj-$(CONFIG_SCSI_CPQFCTS) += cpqfc.o obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o obj-$(CONFIG_SCSI_IPR) += ipr.o @@ -165,8 +164,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -cpqfc-objs := cpqfcTSinit.o cpqfcTScontrol.o cpqfcTSi2c.o \ - cpqfcTSworker.o cpqfcTStrigger.o libata-objs := libata-core.o libata-scsi.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/cpqfcTS.h b/drivers/scsi/cpqfcTS.h deleted file mode 100644 index 7ce53d88cb9..00000000000 --- a/drivers/scsi/cpqfcTS.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef CPQFCTS_H -#define CPQFCTS_H -#include "cpqfcTSstructs.h" - -// These functions are required by the Linux SCSI layers -extern int cpqfcTS_detect(Scsi_Host_Template *); -extern int cpqfcTS_release(struct Scsi_Host *); -extern const char * cpqfcTS_info(struct Scsi_Host *); -extern int cpqfcTS_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int); -extern int cpqfcTS_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *)); -extern int cpqfcTS_abort(Scsi_Cmnd *); -extern int cpqfcTS_reset(Scsi_Cmnd *, unsigned int); -extern int cpqfcTS_eh_abort(Scsi_Cmnd *Cmnd); -extern int cpqfcTS_eh_device_reset(Scsi_Cmnd *); -extern int cpqfcTS_biosparam(struct scsi_device *, struct block_device *, - sector_t, int[]); -extern int cpqfcTS_ioctl( Scsi_Device *ScsiDev, int Cmnd, void *arg); - -#endif /* CPQFCTS_H */ diff --git a/drivers/scsi/cpqfcTSchip.h b/drivers/scsi/cpqfcTSchip.h deleted file mode 100644 index 14b83373861..00000000000 --- a/drivers/scsi/cpqfcTSchip.h +++ /dev/null @@ -1,238 +0,0 @@ -/* Copyright(c) 2000, Compaq Computer Corporation - * Fibre Channel Host Bus Adapter - * 64-bit, 66MHz PCI - * Originally developed and tested on: - * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... - * SP# P225CXCBFIEL6T, Rev XC - * SP# 161290-001, Rev XD - * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Written by Don Zimmerman -*/ -#ifndef CPQFCTSCHIP_H -#define CPQFCTSCHIP_H -#ifndef TACHYON_CHIP_INC - -// FC-PH (Physical) specification levels for Login payloads -// NOTE: These are NOT strictly complied with by any FC vendors - -#define FC_PH42 0x08 -#define FC_PH43 0x09 -#define FC_PH3 0x20 - -#define TACHLITE_TS_RX_SIZE 1024 // max inbound frame size -// "I" prefix is for Include - -#define IVENDID 0x00 // word -#define IDEVID 0x02 -#define ITLCFGCMD 0x04 -#define IMEMBASE 0x18 // Tachyon -#define ITLMEMBASE 0x1C // Tachlite -#define IIOBASEL 0x10 // Tachyon I/O base address, lower 256 bytes -#define IIOBASEU 0x14 // Tachyon I/O base address, upper 256 bytes -#define ITLIOBASEL 0x14 // TachLite I/O base address, lower 256 bytes -#define ITLIOBASEU 0x18 // TachLite I/O base address, upper 256 bytes -#define ITLRAMBASE 0x20 // TL on-board RAM start -#define ISROMBASE 0x24 -#define IROMBASE 0x30 - -#define ICFGCMD 0x04 // PCI config - PCI config access (word) -#define ICFGSTAT 0x06 // PCI status (R - word) -#define IRCTR_WCTR 0x1F2 // ROM control / pre-fetch wait counter -#define IPCIMCTR 0x1F3 // PCI master control register -#define IINTPEND 0x1FD // Interrupt pending (I/O Upper - Tachyon & TL) -#define IINTEN 0x1FE // Interrupt enable (I/O Upper - Tachyon & TL) -#define IINTSTAT 0x1FF // Interrupt status (I/O Upper - Tachyon & TL) - -#define IMQ_BASE 0x80 -#define IMQ_LENGTH 0x84 -#define IMQ_CONSUMER_INDEX 0x88 -#define IMQ_PRODUCER_INDEX 0x8C // Tach copies its INDX to bits 0-7 of value - -/* -// IOBASE UPPER -#define SFSBQ_BASE 0x00 // single-frame sequences -#define SFSBQ_LENGTH 0x04 -#define SFSBQ_PRODUCER_INDEX 0x08 -#define SFSBQ_CONSUMER_INDEX 0x0C // (R) -#define SFS_BUFFER_LENGTH 0X10 - // SCSI-FCP hardware assists -#define SEST_BASE 0x40 // SSCI Exchange State Table -#define SEST_LENGTH 0x44 -#define SCSI_BUFFER_LENGTH 0x48 -#define SEST_LINKED_LIST 0x4C - -#define TACHYON_My_ID 0x6C -#define TACHYON_CONFIGURATION 0x84 // (R/W) reset val 2 -#define TACHYON_CONTROL 0x88 -#define TACHYON_STATUS 0x8C // (R) -#define TACHYON_FLUSH_SEST 0x90 // (R/W) -#define TACHYON_EE_CREDIT_TMR 0x94 // (R) -#define TACHYON_BB_CREDIT_TMR 0x98 // (R) -#define TACHYON_RCV_FRAME_ERR 0x9C // (R) -#define FRAME_MANAGER_CONFIG 0xC0 // (R/W) -#define FRAME_MANAGER_CONTROL 0xC4 -#define FRAME_MANAGER_STATUS 0xC8 // (R) -#define FRAME_MANAGER_ED_TOV 0xCC -#define FRAME_MANAGER_LINK_ERR1 0xD0 // (R) -#define FRAME_MANAGER_LINK_ERR2 0xD4 // (R) -#define FRAME_MANAGER_TIMEOUT2 0xD8 // (W) -#define FRAME_MANAGER_BB_CREDIT 0xDC // (R) -#define FRAME_MANAGER_WWN_HI 0xE0 // (R/W) -#define FRAME_MANAGER_WWN_LO 0xE4 // (R/W) -#define FRAME_MANAGER_RCV_AL_PA 0xE8 // (R) -#define FRAME_MANAGER_PRIMITIVE 0xEC // {K28.5} byte1 byte2 byte3 -*/ - -#define TL_MEM_ERQ_BASE 0x0 //ERQ Base -#define TL_IO_ERQ_BASE 0x0 //ERQ base - -#define TL_MEM_ERQ_LENGTH 0x4 //ERQ Length -#define TL_IO_ERQ_LENGTH 0x4 //ERQ Length - -#define TL_MEM_ERQ_PRODUCER_INDEX 0x8 //ERQ Producer Index register -#define TL_IO_ERQ_PRODUCER_INDEX 0x8 //ERQ Producer Index register - -#define TL_MEM_ERQ_CONSUMER_INDEX_ADR 0xC //ERQ Consumer Index address register -#define TL_IO_ERQ_CONSUMER_INDEX_ADR 0xC //ERQ Consumer Index address register - -#define TL_MEM_ERQ_CONSUMER_INDEX 0xC //ERQ Consumer Index -#define TL_IO_ERQ_CONSUMER_INDEX 0xC //ERQ Consumer Index - -#define TL_MEM_SFQ_BASE 0x50 //SFQ Base -#define TL_IO_SFQ_BASE 0x50 //SFQ base - -#define TL_MEM_SFQ_LENGTH 0x54 //SFQ Length -#define TL_IO_SFQ_LENGTH 0x54 //SFQ Length - -#define TL_MEM_SFQ_CONSUMER_INDEX 0x58 //SFQ Consumer Index -#define TL_IO_SFQ_CONSUMER_INDEX 0x58 //SFQ Consumer Index - -#define TL_MEM_IMQ_BASE 0x80 //IMQ Base -#define TL_IO_IMQ_BASE 0x80 //IMQ base - -#define TL_MEM_IMQ_LENGTH 0x84 //IMQ Length -#define TL_IO_IMQ_LENGTH 0x84 //IMQ Length - -#define TL_MEM_IMQ_CONSUMER_INDEX 0x88 //IMQ Consumer Index -#define TL_IO_IMQ_CONSUMER_INDEX 0x88 //IMQ Consumer Index - -#define TL_MEM_IMQ_PRODUCER_INDEX_ADR 0x8C //IMQ Producer Index address register -#define TL_IO_IMQ_PRODUCER_INDEX_ADR 0x8C //IMQ Producer Index address register - -#define TL_MEM_SEST_BASE 0x140 //SFQ Base -#define TL_IO_SEST_BASE 0x40 //SFQ base - -#define TL_MEM_SEST_LENGTH 0x144 //SFQ Length -#define TL_IO_SEST_LENGTH 0x44 //SFQ Length - -#define TL_MEM_SEST_LINKED_LIST 0x14C - -#define TL_MEM_SEST_SG_PAGE 0x168 // Extended Scatter/Gather page size - -#define TL_MEM_TACH_My_ID 0x16C -#define TL_IO_TACH_My_ID 0x6C //My AL_PA ID - -#define TL_MEM_TACH_CONFIG 0x184 //Tachlite Configuration register -#define TL_IO_CONFIG 0x84 //Tachlite Configuration register - -#define TL_MEM_TACH_CONTROL 0x188 //Tachlite Control register -#define TL_IO_CTR 0x88 //Tachlite Control register - -#define TL_MEM_TACH_STATUS 0x18C //Tachlite Status register -#define TL_IO_STAT 0x8C //Tachlite Status register - -#define TL_MEM_FM_CONFIG 0x1C0 //Frame Manager Configuration register -#define TL_IO_FM_CONFIG 0xC0 //Frame Manager Configuration register - -#define TL_MEM_FM_CONTROL 0x1C4 //Frame Manager Control -#define TL_IO_FM_CTL 0xC4 //Frame Manager Control - -#define TL_MEM_FM_STATUS 0x1C8 //Frame Manager Status -#define TL_IO_FM_STAT 0xC8 //Frame Manager Status - -#define TL_MEM_FM_LINK_STAT1 0x1D0 //Frame Manager Link Status 1 -#define TL_IO_FM_LINK_STAT1 0xD0 //Frame Manager Link Status 1 - -#define TL_MEM_FM_LINK_STAT2 0x1D4 //Frame Manager Link Status 2 -#define TL_IO_FM_LINK_STAT2 0xD4 //Frame Manager Link Status 2 - -#define TL_MEM_FM_TIMEOUT2 0x1D8 // (W) - -#define TL_MEM_FM_BB_CREDIT0 0x1DC - -#define TL_MEM_FM_WWN_HI 0x1E0 //Frame Manager World Wide Name High -#define TL_IO_FM_WWN_HI 0xE0 //Frame Manager World Wide Name High - -#define TL_MEM_FM_WWN_LO 0x1E4 //Frame Manager World Wide Name LOW -#define TL_IO_FM_WWN_LO 0xE4 //Frame Manager World Wide Name Low - -#define TL_MEM_FM_RCV_AL_PA 0x1E8 //Frame Manager AL_PA Received register -#define TL_IO_FM_ALPA 0xE8 //Frame Manager AL_PA Received register - -#define TL_MEM_FM_ED_TOV 0x1CC - -#define TL_IO_ROMCTR 0xFA //TL PCI ROM Control Register -#define TL_IO_PCIMCTR 0xFB //TL PCI Master Control Register -#define TL_IO_SOFTRST 0xFC //Tachlite Configuration register -#define TL_MEM_SOFTRST 0x1FC //Tachlite Configuration register - -// completion message types (bit 8 set means Interrupt generated) -// CM_Type -#define OUTBOUND_COMPLETION 0 -#define ERROR_IDLE_COMPLETION 0x01 -#define OUT_HI_PRI_COMPLETION 0x01 -#define INBOUND_MFS_COMPLETION 0x02 -#define INBOUND_000_COMPLETION 0x03 -#define INBOUND_SFS_COMPLETION 0x04 // Tachyon & TachLite -#define ERQ_FROZEN_COMPLETION 0x06 // TachLite -#define INBOUND_C1_TIMEOUT 0x05 -#define INBOUND_BUSIED_FRAME 0x06 -#define SFS_BUF_WARN 0x07 -#define FCP_FROZEN_COMPLETION 0x07 // TachLite -#define MFS_BUF_WARN 0x08 -#define IMQ_BUF_WARN 0x09 -#define FRAME_MGR_INTERRUPT 0x0A -#define READ_STATUS 0x0B -#define INBOUND_SCSI_DATA_COMPLETION 0x0C -#define INBOUND_FCP_XCHG_COMPLETION 0x0C // TachLite -#define INBOUND_SCSI_DATA_COMMAND 0x0D -#define BAD_SCSI_FRAME 0x0E -#define INB_SCSI_STATUS_COMPLETION 0x0F -#define BUFFER_PROCESSED_COMPLETION 0x11 - -// FC-AL (Tachyon) Loop Port State Machine defs -// (loop "Up" states) -#define MONITORING 0x0 -#define ARBITRATING 0x1 -#define ARBITRAT_WON 0x2 -#define OPEN 0x3 -#define OPENED 0x4 -#define XMITTD_CLOSE 0x5 -#define RCVD_CLOSE 0x6 -#define TRANSFER 0x7 - -// (loop "Down" states) -#define INITIALIZING 0x8 -#define O_I_INIT 0x9 -#define O_I_PROTOCOL 0xa -#define O_I_LIP_RCVD 0xb -#define HOST_CONTROL 0xc -#define LOOP_FAIL 0xd -// (no 0xe) -#define OLD_PORT 0xf - - - -#define TACHYON_CHIP_INC -#endif -#endif /* CPQFCTSCHIP_H */ diff --git a/drivers/scsi/cpqfcTScontrol.c b/drivers/scsi/cpqfcTScontrol.c deleted file mode 100644 index bd94c70f473..00000000000 --- a/drivers/scsi/cpqfcTScontrol.c +++ /dev/null @@ -1,2231 +0,0 @@ -/* Copyright 2000, Compaq Computer Corporation - * Fibre Channel Host Bus Adapter - * 64-bit, 66MHz PCI - * Originally developed and tested on: - * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... - * SP# P225CXCBFIEL6T, Rev XC - * SP# 161290-001, Rev XD - * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Written by Don Zimmerman -*/ -/* These functions control the host bus adapter (HBA) hardware. The main chip - control takes place in the interrupt handler where we process the IMQ - (Inbound Message Queue). The IMQ is Tachyon's way of communicating FC link - events and state information to the driver. The Single Frame Queue (SFQ) - buffers incoming FC frames for processing by the driver. References to - "TL/TS UG" are for: - "HP HPFC-5100/5166 Tachyon TL/TS ICs User Guide", August 16, 1999, 1st Ed. - Hewlitt Packard Manual Part Number 5968-1083E. -*/ - -#define LinuxVersionCode(v, p, s) (((v)<<16)+((p)<<8)+(s)) - -#include <linux/blkdev.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ioport.h> // request_region() prototype -#include <linux/sched.h> -#include <linux/slab.h> // need "kfree" for ext. S/G pages -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/unistd.h> -#include <asm/io.h> // struct pt_regs for IRQ handler & Port I/O -#include <asm/irq.h> -#include <linux/spinlock.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> // Scsi_Host definition for INT handler -#include "cpqfcTSchip.h" -#include "cpqfcTSstructs.h" - -//#define IMQ_DEBUG 1 - -static void fcParseLinkStatusCounters(TACHYON * fcChip); -static void CpqTsGetSFQEntry(TACHYON * fcChip, - USHORT pi, ULONG * buffr, BOOLEAN UpdateChip); - -static void -cpqfc_free_dma_consistent(CPQFCHBA *cpqfcHBAdata) -{ - // free up the primary EXCHANGES struct and Link Q - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - - if (fcChip->Exchanges != NULL) - pci_free_consistent(cpqfcHBAdata->PciDev, sizeof(FC_EXCHANGES), - fcChip->Exchanges, fcChip->exch_dma_handle); - fcChip->Exchanges = NULL; - if (cpqfcHBAdata->fcLQ != NULL) - pci_free_consistent(cpqfcHBAdata->PciDev, sizeof(FC_LINK_QUE), - cpqfcHBAdata->fcLQ, cpqfcHBAdata->fcLQ_dma_handle); - cpqfcHBAdata->fcLQ = NULL; -} - -// Note special requirements for Q alignment! (TL/TS UG pg. 190) -// We place critical index pointers at end of QUE elements to assist -// in non-symbolic (i.e. memory dump) debugging -// opcode defines placement of Queues (e.g. local/external RAM) - -int CpqTsCreateTachLiteQues( void* pHBA, int opcode) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA*)pHBA; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - - int iStatus=0; - unsigned long ulAddr; - dma_addr_t ERQdma, IMQdma, SPQdma, SESTdma; - int i; - - // NOTE! fcMemManager() will return system virtual addresses. - // System (kernel) virtual addresses, though non-paged, still - // aren't physical addresses. Convert to PHYSICAL_ADDRESS for Tachyon's - // DMA use. - ENTER("CreateTachLiteQues"); - - - // Allocate primary EXCHANGES array... - fcChip->Exchanges = NULL; - cpqfcHBAdata->fcLQ = NULL; - - /* printk("Allocating %u for %u Exchanges ", - (ULONG)sizeof(FC_EXCHANGES), TACH_MAX_XID); */ - fcChip->Exchanges = pci_alloc_consistent(cpqfcHBAdata->PciDev, - sizeof(FC_EXCHANGES), &fcChip->exch_dma_handle); - /* printk("@ %p\n", fcChip->Exchanges); */ - - if( fcChip->Exchanges == NULL ) // fatal error!! - { - printk("pci_alloc_consistent failure on Exchanges: fatal error\n"); - return -1; - } - // zero out the entire EXCHANGE space - memset( fcChip->Exchanges, 0, sizeof( FC_EXCHANGES)); - - - /* printk("Allocating %u for LinkQ ", (ULONG)sizeof(FC_LINK_QUE)); */ - cpqfcHBAdata->fcLQ = pci_alloc_consistent(cpqfcHBAdata->PciDev, - sizeof( FC_LINK_QUE), &cpqfcHBAdata->fcLQ_dma_handle); - /* printk("@ %p (%u elements)\n", cpqfcHBAdata->fcLQ, FC_LINKQ_DEPTH); */ - - if( cpqfcHBAdata->fcLQ == NULL ) // fatal error!! - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk("pci_alloc_consistent() failure on fc Link Que: fatal error\n"); - return -1; - } - // zero out the entire EXCHANGE space - memset( cpqfcHBAdata->fcLQ, 0, sizeof( FC_LINK_QUE)); - - // Verify that basic Tach I/O registers are not NULL - if( !fcChip->Registers.ReMapMemBase ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk("HBA base address NULL: fatal error\n"); - return -1; - } - - - // Initialize the fcMemManager memory pairs (stores allocated/aligned - // pairs for future freeing) - memset( cpqfcHBAdata->dynamic_mem, 0, sizeof(cpqfcHBAdata->dynamic_mem)); - - - // Allocate Tach's Exchange Request Queue (each ERQ entry 32 bytes) - - fcChip->ERQ = fcMemManager( cpqfcHBAdata->PciDev, - &cpqfcHBAdata->dynamic_mem[0], - sizeof( TachLiteERQ ), 32*(ERQ_LEN), 0L, &ERQdma); - if( !fcChip->ERQ ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk("pci_alloc_consistent/alignment failure on ERQ: fatal error\n"); - return -1; - } - fcChip->ERQ->length = ERQ_LEN-1; - ulAddr = (ULONG) ERQdma; -#if BITS_PER_LONG > 32 - if( (ulAddr >> 32) ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk(" FATAL! ERQ ptr %p exceeds Tachyon's 32-bit register size\n", - (void*)ulAddr); - return -1; // failed - } -#endif - fcChip->ERQ->base = (ULONG)ulAddr; // copy for quick reference - - - // Allocate Tach's Inbound Message Queue (32 bytes per entry) - - fcChip->IMQ = fcMemManager( cpqfcHBAdata->PciDev, - &cpqfcHBAdata->dynamic_mem[0], - sizeof( TachyonIMQ ), 32*(IMQ_LEN), 0L, &IMQdma ); - if( !fcChip->IMQ ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk("pci_alloc_consistent/alignment failure on IMQ: fatal error\n"); - return -1; - } - fcChip->IMQ->length = IMQ_LEN-1; - - ulAddr = IMQdma; -#if BITS_PER_LONG > 32 - if( (ulAddr >> 32) ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk(" FATAL! IMQ ptr %p exceeds Tachyon's 32-bit register size\n", - (void*)ulAddr); - return -1; // failed - } -#endif - fcChip->IMQ->base = (ULONG)ulAddr; // copy for quick reference - - - // Allocate Tach's Single Frame Queue (64 bytes per entry) - fcChip->SFQ = fcMemManager( cpqfcHBAdata->PciDev, - &cpqfcHBAdata->dynamic_mem[0], - sizeof( TachLiteSFQ ), 64*(SFQ_LEN),0L, &SPQdma ); - if( !fcChip->SFQ ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk("pci_alloc_consistent/alignment failure on SFQ: fatal error\n"); - return -1; - } - fcChip->SFQ->length = SFQ_LEN-1; // i.e. Que length [# entries - - // min. 32; max. 4096 (0xffff)] - - ulAddr = SPQdma; -#if BITS_PER_LONG > 32 - if( (ulAddr >> 32) ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk(" FATAL! SFQ ptr %p exceeds Tachyon's 32-bit register size\n", - (void*)ulAddr); - return -1; // failed - } -#endif - fcChip->SFQ->base = (ULONG)ulAddr; // copy for quick reference - - - // Allocate SCSI Exchange State Table; aligned nearest @sizeof - // power-of-2 boundary - // LIVE DANGEROUSLY! Assume the boundary for SEST mem will - // be on physical page (e.g. 4k) boundary. - /* printk("Allocating %u for TachSEST for %u Exchanges\n", - (ULONG)sizeof(TachSEST), TACH_SEST_LEN); */ - fcChip->SEST = fcMemManager( cpqfcHBAdata->PciDev, - &cpqfcHBAdata->dynamic_mem[0], - sizeof(TachSEST), 4, 0L, &SESTdma ); -// sizeof(TachSEST), 64*TACH_SEST_LEN, 0L ); - if( !fcChip->SEST ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk("pci_alloc_consistent/alignment failure on SEST: fatal error\n"); - return -1; - } - - for( i=0; i < TACH_SEST_LEN; i++) // for each exchange - fcChip->SEST->sgPages[i] = NULL; - - fcChip->SEST->length = TACH_SEST_LEN; // e.g. DON'T subtract one - // (TL/TS UG, pg 153) - - ulAddr = SESTdma; -#if BITS_PER_LONG > 32 - if( (ulAddr >> 32) ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk(" FATAL! SFQ ptr %p exceeds Tachyon's 32-bit register size\n", - (void*)ulAddr); - return -1; // failed - } -#endif - fcChip->SEST->base = (ULONG)ulAddr; // copy for quick reference - - - // Now that structures are defined, - // fill in Tachyon chip registers... - - // EEEEEEEE EXCHANGE REQUEST QUEUE - - writel( fcChip->ERQ->base, - (fcChip->Registers.ReMapMemBase + TL_MEM_ERQ_BASE)); - - writel( fcChip->ERQ->length, - (fcChip->Registers.ReMapMemBase + TL_MEM_ERQ_LENGTH)); - - - fcChip->ERQ->producerIndex = 0L; - writel( fcChip->ERQ->producerIndex, - (fcChip->Registers.ReMapMemBase + TL_MEM_ERQ_PRODUCER_INDEX)); - - - // NOTE! write consumer index last, since the write - // causes Tachyon to process the other registers - - ulAddr = ((unsigned long)&fcChip->ERQ->consumerIndex - - (unsigned long)fcChip->ERQ) + (unsigned long) ERQdma; - - // NOTE! Tachyon DMAs to the ERQ consumer Index host - // address; must be correctly aligned - writel( (ULONG)ulAddr, - (fcChip->Registers.ReMapMemBase + TL_MEM_ERQ_CONSUMER_INDEX_ADR)); - - - - // IIIIIIIIIIIII INBOUND MESSAGE QUEUE - // Tell Tachyon where the Que starts - - // set the Host's pointer for Tachyon to access - - /* printk(" cpqfcTS: writing IMQ BASE %Xh ", fcChip->IMQ->base ); */ - writel( fcChip->IMQ->base, - (fcChip->Registers.ReMapMemBase + IMQ_BASE)); - - writel( fcChip->IMQ->length, - (fcChip->Registers.ReMapMemBase + IMQ_LENGTH)); - - writel( fcChip->IMQ->consumerIndex, - (fcChip->Registers.ReMapMemBase + IMQ_CONSUMER_INDEX)); - - - // NOTE: TachLite DMAs to the producerIndex host address - // must be correctly aligned with address bits 1-0 cleared - // Writing the BASE register clears the PI register, so write it last - ulAddr = ((unsigned long)&fcChip->IMQ->producerIndex - - (unsigned long)fcChip->IMQ) + (unsigned long) IMQdma; - -#if BITS_PER_LONG > 32 - if( (ulAddr >> 32) ) - { - cpqfc_free_dma_consistent(cpqfcHBAdata); - printk(" FATAL! IMQ ptr %p exceeds Tachyon's 32-bit register size\n", - (void*)ulAddr); - return -1; // failed - } -#endif -#if DBG - printk(" PI %Xh\n", (ULONG)ulAddr ); -#endif - writel( (ULONG)ulAddr, - (fcChip->Registers.ReMapMemBase + IMQ_PRODUCER_INDEX)); - - - - // SSSSSSSSSSSSSSS SINGLE FRAME SEQUENCE - // Tell TachLite where the Que starts - - writel( fcChip->SFQ->base, - (fcChip->Registers.ReMapMemBase + TL_MEM_SFQ_BASE)); - - writel( fcChip->SFQ->length, - (fcChip->Registers.ReMapMemBase + TL_MEM_SFQ_LENGTH)); - - - // tell TachLite where SEST table is & how long - writel( fcChip->SEST->base, - (fcChip->Registers.ReMapMemBase + TL_MEM_SEST_BASE)); - - /* printk(" cpqfcTS: SEST %p(virt): Wrote base %Xh @ %p\n", - fcChip->SEST, fcChip->SEST->base, - fcChip->Registers.ReMapMemBase + TL_MEM_SEST_BASE); */ - - writel( fcChip->SEST->length, - (fcChip->Registers.ReMapMemBase + TL_MEM_SEST_LENGTH)); - - writel( (TL_EXT_SG_PAGE_COUNT-1), - (fcChip->Registers.ReMapMemBase + TL_MEM_SEST_SG_PAGE)); - - - LEAVE("CreateTachLiteQues"); - - return iStatus; -} - - - -// function to return TachLite to Power On state -// 1st - reset tachyon ('SOFT' reset) -// others - future - -int CpqTsResetTachLite(void *pHBA, int type) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA*)pHBA; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - ULONG ulBuff, i; - int ret_status=0; // def. success - - ENTER("ResetTach"); - - switch(type) - { - - case CLEAR_FCPORTS: - - // in case he was running previously, mask Tach's interrupt - writeb( 0, (fcChip->Registers.ReMapMemBase + IINTEN)); - - // de-allocate mem for any Logged in ports - // (e.g., our module is unloading) - // search the forward linked list, de-allocating - // the memory we allocated when the port was initially logged in - { - PFC_LOGGEDIN_PORT pLoggedInPort = fcChip->fcPorts.pNextPort; - PFC_LOGGEDIN_PORT ptr; -// printk("checking for allocated LoggedInPorts...\n"); - - while( pLoggedInPort ) - { - ptr = pLoggedInPort; - pLoggedInPort = ptr->pNextPort; -// printk("kfree(%p) on FC LoggedInPort port_id 0x%06lX\n", -// ptr, ptr->port_id); - kfree( ptr ); - } - } - // (continue resetting hardware...) - - case 1: // RESTART Tachyon (power-up state) - - // in case he was running previously, mask Tach's interrupt - writeb( 0, (fcChip->Registers.ReMapMemBase + IINTEN)); - // turn OFF laser (NOTE: laser is turned - // off during reset, because GPIO4 is cleared - // to 0 by reset action - see TLUM, sec 7.22) - // However, CPQ 64-bit HBAs have a "health - // circuit" which keeps laser ON for a brief - // period after it is turned off ( < 1s) - - fcChip->LaserControl( fcChip->Registers.ReMapMemBase, 0); - - - - // soft reset timing constraints require: - // 1. set RST to 1 - // 2. read SOFTRST register - // (128 times per R. Callison code) - // 3. clear PCI ints - // 4. clear RST to 0 - writel( 0xff000001L, - (fcChip->Registers.ReMapMemBase + TL_MEM_SOFTRST)); - - for( i=0; i<128; i++) - ulBuff = readl( fcChip->Registers.ReMapMemBase + TL_MEM_SOFTRST); - - // clear the soft reset - for( i=0; i<8; i++) - writel( 0, (fcChip->Registers.ReMapMemBase + TL_MEM_SOFTRST)); - - - - // clear out our copy of Tach regs, - // because they must be invalid now, - // since TachLite reset all his regs. - CpqTsDestroyTachLiteQues(cpqfcHBAdata,0); // remove Host-based Que structs - cpqfcTSClearLinkStatusCounters(fcChip); // clear our s/w accumulators - // lower bits give GBIC info - fcChip->Registers.TYstatus.value = - readl( fcChip->Registers.TYstatus.address ); - break; - -/* - case 2: // freeze SCSI - case 3: // reset Outbound command que (ERQ) - case 4: // unfreeze OSM (Outbound Seq. Man.) 'er' - case 5: // report status - - break; -*/ - default: - ret_status = -1; // invalid option passed to RESET function - break; - } - LEAVE("ResetTach"); - return ret_status; -} - - - - - - -// 'addrBase' is IOBaseU for both TachLite and (older) Tachyon -int CpqTsLaserControl( void* addrBase, int opcode ) -{ - ULONG dwBuff; - - dwBuff = readl((addrBase + TL_MEM_TACH_CONTROL) ); // read TL Control reg - // (change only bit 4) - if( opcode == 1) - dwBuff |= ~0xffffffefL; // set - ON - else - dwBuff &= 0xffffffefL; // clear - OFF - writel( dwBuff, (addrBase + TL_MEM_TACH_CONTROL)); // write TL Control reg - return 0; -} - - - - - -// Use controller's "Options" field to determine loopback mode (if any) -// internal loopback (silicon - no GBIC) -// external loopback (GBIC - no FC loop) -// no loopback: L_PORT, external cable from GBIC required - -int CpqTsInitializeFrameManager( void *pChip, int opcode) -{ - PTACHYON fcChip; - int iStatus; - ULONG wwnLo, wwnHi; // for readback verification - - ENTER("InitializeFrameManager"); - fcChip = (PTACHYON)pChip; - if( !fcChip->Registers.ReMapMemBase ) // undefined controller? - return -1; - - // TL/TS UG, pg. 184 - // 0x0065 = 100ms for RT_TOV - // 0x01f5 = 500ms for ED_TOV - // 0x07D1 = 2000ms - fcChip->Registers.ed_tov.value = 0x006507D1; - writel( fcChip->Registers.ed_tov.value, - (fcChip->Registers.ed_tov.address)); - - - // Set LP_TOV to the FC-AL2 specified 2 secs. - // TL/TS UG, pg. 185 - writel( 0x07d00010, fcChip->Registers.ReMapMemBase +TL_MEM_FM_TIMEOUT2); - - - // Now try to read the WWN from the adapter's NVRAM - iStatus = CpqTsReadWriteWWN( fcChip, 1); // '1' for READ - - if( iStatus ) // NVRAM read failed? - { - printk(" WARNING! HBA NVRAM WWN read failed - make alias\n"); - // make up a WWN. If NULL or duplicated on loop, FC loop may hang! - - - fcChip->Registers.wwn_hi = (__u32)jiffies; - fcChip->Registers.wwn_hi |= 0x50000000L; - fcChip->Registers.wwn_lo = 0x44556677L; - } - - - writel( fcChip->Registers.wwn_hi, - fcChip->Registers.ReMapMemBase + TL_MEM_FM_WWN_HI); - - writel( fcChip->Registers.wwn_lo, - fcChip->Registers.ReMapMemBase + TL_MEM_FM_WWN_LO); - - - // readback for verification: - wwnHi = readl( fcChip->Registers.ReMapMemBase + TL_MEM_FM_WWN_HI ); - - wwnLo = readl( fcChip->Registers.ReMapMemBase + TL_MEM_FM_WWN_LO); - // test for correct chip register WRITE/READ - DEBUG_PCI( printk(" WWN %08X%08X\n", - fcChip->Registers.wwn_hi, fcChip->Registers.wwn_lo ) ); - - if( wwnHi != fcChip->Registers.wwn_hi || - wwnLo != fcChip->Registers.wwn_lo ) - { - printk( "cpqfcTS: WorldWideName register load failed\n"); - return -1; // FAILED! - } - - - - // set Frame Manager Initialize command - fcChip->Registers.FMcontrol.value = 0x06; - - // Note: for test/debug purposes, we may use "Hard" address, - // but we completely support "soft" addressing, including - // dynamically changing our address. - if( fcChip->Options.intLoopback == 1 ) // internal loopback - fcChip->Registers.FMconfig.value = 0x0f002080L; - else if( fcChip->Options.extLoopback == 1 ) // internal loopback - fcChip->Registers.FMconfig.value = 0x0f004080L; - else // L_Port - fcChip->Registers.FMconfig.value = 0x55000100L; // hard address (55h start) -// fcChip->Registers.FMconfig.value = 0x01000080L; // soft address (can't pick) -// fcChip->Registers.FMconfig.value = 0x55000100L; // hard address (55h start) - - // write config to FM - - if( !fcChip->Options.intLoopback && !fcChip->Options.extLoopback ) - // (also need LASER for real LOOP) - fcChip->LaserControl( fcChip->Registers.ReMapMemBase, 1); // turn on LASER - - writel( fcChip->Registers.FMconfig.value, - fcChip->Registers.FMconfig.address); - - - // issue INITIALIZE command to FM - ACTION! - writel( fcChip->Registers.FMcontrol.value, - fcChip->Registers.FMcontrol.address); - - LEAVE("InitializeFrameManager"); - - return 0; -} - - - - - -// This "look ahead" function examines the IMQ for occurrence of -// "type". Returns 1 if found, 0 if not. -static int PeekIMQEntry( PTACHYON fcChip, ULONG type) -{ - ULONG CI = fcChip->IMQ->consumerIndex; - ULONG PI = fcChip->IMQ->producerIndex; // snapshot of IMQ indexes - - while( CI != PI ) - { // proceed with search - if( (++CI) >= IMQ_LEN ) CI = 0; // rollover check - - switch( type ) - { - case ELS_LILP_FRAME: - { - // first, we need to find an Inbound Completion message, - // If we find it, check the incoming frame payload (1st word) - // for LILP frame - if( (fcChip->IMQ->QEntry[CI].type & 0x1FF) == 0x104 ) - { - TachFCHDR_GCMND* fchs; -#error This is too much stack - ULONG ulFibreFrame[2048/4]; // max DWORDS in incoming FC Frame - USHORT SFQpi = (USHORT)(fcChip->IMQ->QEntry[CI].word[0] & 0x0fffL); - - CpqTsGetSFQEntry( fcChip, - SFQpi, // SFQ producer ndx - ulFibreFrame, // contiguous dest. buffer - FALSE); // DON'T update chip--this is a "lookahead" - - fchs = (TachFCHDR_GCMND*)&ulFibreFrame; - if( fchs->pl[0] == ELS_LILP_FRAME) - { - return 1; // found the LILP frame! - } - else - { - // keep looking... - } - } - } - break; - - case OUTBOUND_COMPLETION: - if( (fcChip->IMQ->QEntry[CI].type & 0x1FF) == 0x00 ) - { - - // any OCM errors? - if( fcChip->IMQ->QEntry[CI].word[2] & 0x7a000000L ) - return 1; // found OCM error - } - break; - - - - default: - break; - } - } - return 0; // failed to find "type" -} - - -static void SetTachTOV( CPQFCHBA* cpqfcHBAdata) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - - // TL/TS UG, pg. 184 - // 0x0065 = 100ms for RT_TOV - // 0x01f5 = 500ms for ED_TOV - // 0x07d1 = 2000ms for ED_TOV - - // SANMark Level 1 requires an "initialization backoff" - // (See "SANMark Test Suite Level 1": - // initialization_timeout.fcal.SANMark-1.fc) - // We have to use 2sec, 24sec, then 128sec when login/ - // port discovery processes fail to complete. - - // when port discovery completes (logins done), we set - // ED_TOV to 500ms -- this is the normal operational case - // On the first Link Down, we'll move to 2 secs (7D1 ms) - if( (fcChip->Registers.ed_tov.value &0xFFFF) <= 0x1f5) - fcChip->Registers.ed_tov.value = 0x006507D1; - - // If we get another LST after we moved TOV to 2 sec, - // increase to 24 seconds (5DC1 ms) per SANMark! - else if( (fcChip->Registers.ed_tov.value &0xFFFF) <= 0x7D1) - fcChip->Registers.ed_tov.value = 0x00655DC1; - - // If we get still another LST, set the max TOV (Tachyon - // has only 16 bits for ms timer, so the max is 65.5 sec) - else if( (fcChip->Registers.ed_tov.value &0xFFFF) <= 0x5DC1) - fcChip->Registers.ed_tov.value = 0x0065FFFF; - - writel( fcChip->Registers.ed_tov.value, - (fcChip->Registers.ed_tov.address)); - // keep the same 2sec LP_TOV - writel( 0x07D00010, fcChip->Registers.ReMapMemBase +TL_MEM_FM_TIMEOUT2); -} - - -// The IMQ is an array with IMQ_LEN length, each element (QEntry) -// with eight 32-bit words. Tachyon PRODUCES a QEntry with each -// message it wants to send to the host. The host CONSUMES IMQ entries - -// This function copies the current -// (or oldest not-yet-processed) QEntry to -// the caller, clears/ re-enables the interrupt, and updates the -// (Host) Consumer Index. -// Return value: -// 0 message processed, none remain (producer and consumer -// indexes match) -// 1 message processed, more messages remain -// -1 no message processed - none were available to process -// Remarks: -// TL/TS UG specifices that the following actions for -// INTA_L handling: -// 1. read PCI Interrupt Status register (0xff) -// 2. all IMQ messages should be processed before writing the -// IMQ consumer index. - - -int CpqTsProcessIMQEntry(void *host) -{ - struct Scsi_Host *HostAdapter = (struct Scsi_Host *)host; - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - int iStatus; - USHORT i, RPCset, DPCset; - ULONG x_ID; - ULONG ulBuff, dwStatus; - TachFCHDR_GCMND* fchs; -#error This is too much stack - ULONG ulFibreFrame[2048/4]; // max number of DWORDS in incoming Fibre Frame - UCHAR ucInboundMessageType; // Inbound CM, dword 3 "type" field - - ENTER("ProcessIMQEntry"); - - - // check TachLite's IMQ producer index - - // is a new message waiting for us? - // equal indexes means empty que - - if( fcChip->IMQ->producerIndex != fcChip->IMQ->consumerIndex ) - { // need to process message - - -#ifdef IMQ_DEBUG - printk("PI %X, CI %X type: %X\n", - fcChip->IMQ->producerIndex,fcChip->IMQ->consumerIndex, - fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].type); -#endif - // Examine Completion Messages in IMQ - // what CM_Type? - switch( (UCHAR)(fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].type - & 0xffL) ) - { - case OUTBOUND_COMPLETION: - - // Remarks: - // x_IDs (OX_ID, RX_ID) are partitioned by SEST entries - // (starting at 0), and SFS entries (starting at - // SEST_LEN -- outside the SEST space). - // Psuedo code: - // x_ID (OX_ID or RX_ID) from message is Trans_ID or SEST index - // range check - x_ID - // if x_ID outside 'Transactions' length, error - exit - // if any OCM error, copy error status to Exchange slot - // if FCP ASSIST transaction (x_ID within SEST), - // call fcComplete (to App) - // ... - - - ulBuff = fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[1]; - x_ID = ulBuff & 0x7fffL; // lower 14 bits SEST_Index/Trans_ID - // Range check CM OX/RX_ID value... - if( x_ID < TACH_MAX_XID ) // don't go beyond array space - { - - - if( ulBuff & 0x20000000L ) // RPC -Response Phase Complete? - RPCset = 1; // (SEST transactions only) - else - RPCset = 0; - - if( ulBuff & 0x40000000L ) // DPC -Data Phase Complete? - DPCset = 1; // (SEST transactions only) - else - DPCset = 0; - // set the status for this Outbound transaction's ID - dwStatus = 0L; - if( ulBuff & 0x10000000L ) // SPE? (SEST Programming Error) - dwStatus |= SESTPROG_ERR; - - ulBuff = fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[2]; - if( ulBuff & 0x7a000000L ) // any other errs? - { - if( ulBuff & 0x40000000L ) - dwStatus |= INV_ENTRY; - if( ulBuff & 0x20000000L ) - dwStatus |= FRAME_TO; // FTO - if( ulBuff & 0x10000000L ) - dwStatus |= HOSTPROG_ERR; - if( ulBuff & 0x08000000L ) - dwStatus |= LINKFAIL_TX; - if( ulBuff & 0x02000000L ) - dwStatus |= ABORTSEQ_NOTIFY; // ASN - } - - - if( dwStatus ) // any errors? - { - // set the Outbound Completion status - Exchanges->fcExchange[ x_ID ].status |= dwStatus; - - // if this Outbound frame was for a SEST entry, automatically - // reque it in the case of LINKFAIL (it will restart on PDISC) - if( x_ID < TACH_SEST_LEN ) - { - - printk(" #OCM error %Xh x_ID %X# ", - dwStatus, x_ID); - - Exchanges->fcExchange[x_ID].timeOut = 30000; // seconds default - - - // We Q ABTS for each exchange. - // NOTE: We can get FRAME_TO on bad alpa (device gone). Since - // bad alpa is reported before FRAME_TO, examine the status - // flags to see if the device is removed. If so, DON'T - // post an ABTS, since it will be terminated by the bad alpa - // message. - if( dwStatus & FRAME_TO ) // check for device removed... - { - if( !(Exchanges->fcExchange[x_ID].status & DEVICE_REMOVED) ) - { - // presumes device is still there: send ABTS. - - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID); - } - } - else // Abort all other errors - { - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID); - } - - // if the HPE bit is set, we have to CLose the LOOP - // (see TL/TS UG, pg. 239) - - if( dwStatus &= HOSTPROG_ERR ) - // set CL bit (see TL/TS UG, pg. 172) - writel( 4, fcChip->Registers.FMcontrol.address); - } - } - // NOTE: we don't necessarily care about ALL completion messages... - // SCSI resp. complete OR - if( ((x_ID < TACH_SEST_LEN) && RPCset)|| - (x_ID >= TACH_SEST_LEN) ) // non-SCSI command - { - // exchange done; complete to upper levels with status - // (if necessary) and free the exchange slot - - - if( x_ID >= TACH_SEST_LEN ) // Link Service Outbound frame? - // A Request or Reply has been sent - { // signal waiting WorkerThread - - up( cpqfcHBAdata->TYOBcomplete); // frame is OUT of Tach - - // WorkerThread will complete Xchng - } - else // X_ID is for FCP assist (SEST) - { - // TBD (target mode) -// fcCompleteExchange( fcChip, x_ID); // TRE completed - } - } - } - else // ERROR CONDITION! bogus x_ID in completion message - { - - printk(" ProcessIMQ (OBCM) x_id out of range %Xh\n", x_ID); - - } - - - - // Load the Frame Manager's error counters. We check them here - // because presumably the link is up and healthy enough for the - // counters to be meaningful (i.e., don't check them while loop - // is initializing). - fcChip->Registers.FMLinkStatus1.value = // get TL's counter - readl(fcChip->Registers.FMLinkStatus1.address); - - fcChip->Registers.FMLinkStatus2.value = // get TL's counter - readl(fcChip->Registers.FMLinkStatus2.address); - - - fcParseLinkStatusCounters( fcChip); // load into 6 s/w accumulators - break; - - - - case ERROR_IDLE_COMPLETION: // TachLite Error Idle... - - // We usually get this when the link goes down during heavy traffic. - // For now, presume that if SEST Exchanges are open, we will - // get this as our cue to INVALIDATE all SEST entries - // (and we OWN all the SEST entries). - // See TL/TS UG, pg. 53 - - for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) - { - - // Does this VALid SEST entry need to be invalidated for Abort? - fcChip->SEST->u[ x_ID].IWE.Hdr_Len &= 0x7FFFFFFF; - } - - CpqTsUnFreezeTachlite( fcChip, 2); // unfreeze Tachyon, if Link OK - - break; - - - case INBOUND_SFS_COMPLETION: //0x04 - // NOTE! we must process this SFQ message to avoid SFQ filling - // up and stopping TachLite. Incoming commands are placed here, - // as well as 'unknown' frames (e.g. LIP loop position data) - // write this CM's producer index to global... - // TL/TS UG, pg 234: - // Type: 0 - reserved - // 1 - Unassisted FCP - // 2 - BAD FCP - // 3 - Unkown Frame - // 4-F reserved - - - fcChip->SFQ->producerIndex = (USHORT) - (fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[0] & 0x0fffL); - - - ucInboundMessageType = 0; // default to useless frame - - // we can only process two Types: 1, Unassisted FCP, and 3, Unknown - // Also, we aren't interested in processing frame fragments - // so don't Que anything with 'LKF' bit set - if( !(fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[2] - & 0x40000000) ) // 'LKF' link failure bit clear? - { - ucInboundMessageType = (UCHAR) // ICM DWord3, "Type" - (fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[2] & 0x0fL); - } - else - { - fcChip->fcStats.linkFailRX++; -// printk("LKF (link failure) bit set on inbound message\n"); - } - - // clears SFQ entry from Tachyon buffer; copies to contiguous ulBuff - CpqTsGetSFQEntry( - fcChip, // i.e. this Device Object - (USHORT)fcChip->SFQ->producerIndex, // SFQ producer ndx - ulFibreFrame, TRUE); // contiguous destination buffer, update chip - - // analyze the incoming frame outside the INT handler... - // (i.e., Worker) - - if( ucInboundMessageType == 1 ) - { - fchs = (TachFCHDR_GCMND*)ulFibreFrame; // cast to examine IB frame - // don't fill up our Q with garbage - only accept FCP-CMND - // or XRDY frames - if( (fchs->d_id & 0xFF000000) == 0x06000000 ) // CMND - { - // someone sent us a SCSI command - -// fcPutScsiQue( cpqfcHBAdata, -// SFQ_UNASSISTED_FCP, ulFibreFrame); - } - else if( ((fchs->d_id & 0xFF000000) == 0x07000000) || // RSP (status) - (fchs->d_id & 0xFF000000) == 0x05000000 ) // XRDY - { - ULONG x_ID; - // Unfortunately, ABTS requires a Freeze on the chip so - // we can modify the shared memory SEST. When frozen, - // any received Exchange frames cannot be processed by - // Tachyon, so they will be dumped in here. It is too - // complex to attempt the reconstruct these frames in - // the correct Exchange context, so we simply seek to - // find status or transfer ready frames, and cause the - // exchange to complete with errors before the timeout - // expires. We use a Linux Scsi Cmnd result code that - // causes immediate retry. - - - // Do we have an open exchange that matches this s_id - // and ox_id? - for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) - { - if( (fchs->s_id & 0xFFFFFF) == - (Exchanges->fcExchange[x_ID].fchs.d_id & 0xFFFFFF) - && - (fchs->ox_rx_id & 0xFFFF0000) == - (Exchanges->fcExchange[x_ID].fchs.ox_rx_id & 0xFFFF0000) ) - { - // printk(" #R/X frame x_ID %08X# ", fchs->ox_rx_id ); - // simulate the anticipated error - since the - // SEST was frozen, frames were lost... - Exchanges->fcExchange[ x_ID ].status |= SFQ_FRAME; - - // presumes device is still there: send ABTS. - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID); - break; // done - } - } - } - - } - - else if( ucInboundMessageType == 3) - { - // FC Link Service frames (e.g. PLOGI, ACC) come in here. - cpqfcTSPutLinkQue( cpqfcHBAdata, SFQ_UNKNOWN, ulFibreFrame); - - } - - else if( ucInboundMessageType == 2 ) // "bad FCP"? - { -#ifdef IMQ_DEBUG - printk("Bad FCP incoming frame discarded\n"); -#endif - } - - else // don't know this type - { -#ifdef IMQ_DEBUG - printk("Incoming frame discarded, type: %Xh\n", ucInboundMessageType); -#endif - } - - // Check the Frame Manager's error counters. We check them here - // because presumably the link is up and healthy enough for the - // counters to be meaningful (i.e., don't check them while loop - // is initializing). - fcChip->Registers.FMLinkStatus1.value = // get TL's counter - readl(fcChip->Registers.FMLinkStatus1.address); - - - fcChip->Registers.FMLinkStatus2.value = // get TL's counter - readl(fcChip->Registers.FMLinkStatus2.address); - - - break; - - - - - // We get this CM because we issued a freeze - // command to stop outbound frames. We issue the - // freeze command at Link Up time; when this message - // is received, the ERQ base can be switched and PDISC - // frames can be sent. - - - case ERQ_FROZEN_COMPLETION: // note: expect ERQ followed immediately - // by FCP when freezing TL - fcChip->Registers.TYstatus.value = // read what's frozen - readl(fcChip->Registers.TYstatus.address); - // (do nothing; wait for FCP frozen message) - break; - case FCP_FROZEN_COMPLETION: - - fcChip->Registers.TYstatus.value = // read what's frozen - readl(fcChip->Registers.TYstatus.address); - - // Signal the kernel thread to proceed with SEST modification - up( cpqfcHBAdata->TachFrozen); - - break; - - - - case INBOUND_C1_TIMEOUT: - case MFS_BUF_WARN: - case IMQ_BUF_WARN: - break; - - - - - - // In older Tachyons, we 'clear' the internal 'core' interrupt state - // by reading the FMstatus register. In newer TachLite (Tachyon), - // we must WRITE the register - // to clear the condition (TL/TS UG, pg 179) - case FRAME_MGR_INTERRUPT: - { - PFC_LOGGEDIN_PORT pLoggedInPort; - - fcChip->Registers.FMstatus.value = - readl( fcChip->Registers.FMstatus.address ); - - // PROBLEM: It is possible, especially with "dumb" hubs that - // don't automatically LIP on by-pass of ports that are going - // away, for the hub by-pass process to destroy critical - // ordered sets of a frame. The result of this is a hung LPSM - // (Loop Port State Machine), which on Tachyon results in a - // (default 2 sec) Loop State Timeout (LST) FM message. We - // want to avoid this relatively huge timeout by detecting - // likely scenarios which will result in LST. - // To do this, we could examine FMstatus for Loss of Synchronization - // and/or Elastic Store (ES) errors. Of these, Elastic Store is better - // because we get this indication more quickly than the LOS. - // Not all ES errors are harmfull, so we don't want to LIP on every - // ES. Instead, on every ES, detect whether our LPSM in in one - // of the LST states: ARBITRATING, OPEN, OPENED, XMITTED CLOSE, - // or RECEIVED CLOSE. (See TL/TS UG, pg. 181) - // If any of these LPSM states are detected - // in combination with the LIP while LDn is not set, - // send an FM init (LIP F7,F7 for loops)! - // It is critical to the physical link stability NOT to reset (LIP) - // more than absolutely necessary; this is a basic premise of the - // SANMark level 1 spec. - { - ULONG Lpsm = (fcChip->Registers.FMstatus.value & 0xF0) >>4; - - if( (fcChip->Registers.FMstatus.value & 0x400) // ElasticStore? - && - !(fcChip->Registers.FMstatus.value & 0x100) // NOT LDn - && - !(fcChip->Registers.FMstatus.value & 0x1000)) // NOT LF - { - if( (Lpsm != 0) || // not MONITORING? or - !(Lpsm & 0x8) )// not already offline? - { - // now check the particular LST states... - if( (Lpsm == ARBITRATING) || (Lpsm == OPEN) || - (Lpsm == OPENED) || (Lpsm == XMITTD_CLOSE) || - (Lpsm == RCVD_CLOSE) ) - { - // re-init the loop before it hangs itself! - printk(" #req FMinit on E-S: LPSM %Xh# ",Lpsm); - - - fcChip->fcStats.FMinits++; - writel( 6, fcChip->Registers.FMcontrol.address); // LIP - } - } - } - else if( fcChip->Registers.FMstatus.value & 0x40000 ) // LST? - { - printk(" #req FMinit on LST, LPSM %Xh# ",Lpsm); - - fcChip->fcStats.FMinits++; - writel( 6, fcChip->Registers.FMcontrol.address); // LIP - } - } - - - // clear only the 'interrupting' type bits for this REG read - writel( (fcChip->Registers.FMstatus.value & 0xff3fff00L), - fcChip->Registers.FMstatus.address); - - - // copy frame manager status to unused ULONG slot - fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[0] = - fcChip->Registers.FMstatus.value; // (for debugging) - - - // Load the Frame Manager's error counters. We check them here - // because presumably the link is up and healthy enough for the - // counters to be meaningful (i.e., don't check them while loop - // is initializing). - fcChip->Registers.FMLinkStatus1.value = // get TL's counter - readl(fcChip->Registers.FMLinkStatus1.address); - - fcChip->Registers.FMLinkStatus2.value = // get TL's counter - readl(fcChip->Registers.FMLinkStatus2.address); - - // Get FM BB_Credit Zero Reg - does not clear on READ - fcChip->Registers.FMBB_CreditZero.value = // get TL's counter - readl(fcChip->Registers.FMBB_CreditZero.address); - - - - fcParseLinkStatusCounters( fcChip); // load into 6 s/w accumulators - - - // LINK DOWN - - if( fcChip->Registers.FMstatus.value & 0x100L ) // Link DOWN bit - { - -#ifdef IMQ_DEBUG - printk("LinkDn\n"); -#endif - printk(" #LDn# "); - - fcChip->fcStats.linkDown++; - - SetTachTOV( cpqfcHBAdata); // must set according to SANMark - - // Check the ERQ - force it to be "empty" to prevent Tach - // from sending out frames before we do logins. - - - if( fcChip->ERQ->producerIndex != fcChip->ERQ->consumerIndex) - { -// printk("#ERQ PI != CI#"); - CpqTsFreezeTachlite( fcChip, 1); // freeze ERQ only - fcChip->ERQ->producerIndex = fcChip->ERQ->consumerIndex = 0; - writel( fcChip->ERQ->base, - (fcChip->Registers.ReMapMemBase + TL_MEM_ERQ_BASE)); - // re-writing base forces ERQ PI to equal CI - - } - - // link down transition occurred -- port_ids can change - // on next LinkUp, so we must invalidate current logins - // (and any I/O in progress) until PDISC or PLOGI/PRLI - // completes - { - pLoggedInPort = &fcChip->fcPorts; - while( pLoggedInPort ) // for all ports which are expecting - // PDISC after the next LIP, set the - // logoutTimer - { - - if( pLoggedInPort->pdisc) // expecting PDISC within 2 sec? - { - pLoggedInPort->LOGO_timer = 3; // we want 2 seconds - // but Timer granularity - // is 1 second - } - // suspend any I/O in progress until - // PDISC received... - pLoggedInPort->prli = FALSE; // block FCP-SCSI commands - - pLoggedInPort = pLoggedInPort->pNextPort; - } // ... all Previously known ports checked - } - - // since any hot plugging device may NOT support LILP frames - // (such as early Tachyon chips), clear this flag indicating - // we shouldn't use (our copy of) a LILP map. - // If we receive an LILP frame, we'll set it again. - fcChip->Options.LILPin = 0; // our LILPmap is invalid - cpqfcHBAdata->PortDiscDone = 0; // must re-validate FC ports! - - // also, we want to invalidate (i.e. INITIATOR_ABORT) any - // open Login exchanges, in case the LinkDown happened in the - // middle of logins. It's possible that some ports already - // ACCepted login commands which we have not processed before - // another LinkDown occurred. Any accepted Login exhanges are - // invalidated by LinkDown, even before they are acknowledged. - // It's also possible for a port to have a Queued Reply or Request - // for login which was interrupted by LinkDown; it may come later, - // but it will be unacceptable to us. - - // we must scan the entire exchange space, find every Login type - // originated by us, and abort it. This is NOT an abort due to - // timeout, so we don't actually send abort to the other port - - // we just complete it to free up the fcExchange slot. - - for( i=TACH_SEST_LEN; i< TACH_MAX_XID; i++) - { // looking for Extended Link Serv.Exchanges - if( Exchanges->fcExchange[i].type == ELS_PDISC || - Exchanges->fcExchange[i].type == ELS_PLOGI || - Exchanges->fcExchange[i].type == ELS_PRLI ) - { - // ABORT the exchange! -#ifdef IMQ_DEBUG - printk("Originator ABORT x_id %Xh, type %Xh, port_id %Xh on LDn\n", - i, Exchanges->fcExchange[i].type, - Exchanges->fcExchange[i].fchs.d_id); -#endif - - Exchanges->fcExchange[i].status |= INITIATOR_ABORT; - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, i); // abort on LDn - } - } - - } - - // ################ LINK UP ################## - if( fcChip->Registers.FMstatus.value & 0x200L ) // Link Up bit - { // AL_PA could have changed - - // We need the following code, duplicated from LinkDn condition, - // because it's possible for the Tachyon to re-initialize (hard - // reset) without ever getting a LinkDn indication. - pLoggedInPort = &fcChip->fcPorts; - while( pLoggedInPort ) // for all ports which are expecting - // PDISC after the next LIP, set the - // logoutTimer - { - if( pLoggedInPort->pdisc) // expecting PDISC within 2 sec? - { - pLoggedInPort->LOGO_timer = 3; // we want 2 seconds - // but Timer granularity - // is 1 second - - // suspend any I/O in progress until - // PDISC received... - - } - pLoggedInPort = pLoggedInPort->pNextPort; - } // ... all Previously known ports checked - - // CpqTs acquired AL_PA in register AL_PA (ACQ_ALPA) - fcChip->Registers.rcv_al_pa.value = - readl(fcChip->Registers.rcv_al_pa.address); - - // Now, if our acquired address is DIFFERENT from our - // previous one, we are not allow to do PDISC - we - // must go back to PLOGI, which will terminate I/O in - // progress for ALL logged in FC devices... - // (This is highly unlikely). - - if( (fcChip->Registers.my_al_pa & 0xFF) != - ((fcChip->Registers.rcv_al_pa.value >> 16) &0xFF) ) - { - -// printk(" #our HBA port_id changed!# "); // FC port_id changed!! - - pLoggedInPort = &fcChip->fcPorts; - while( pLoggedInPort ) // for all ports which are expecting - // PDISC after the next LIP, set the - // logoutTimer - { - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; - pLoggedInPort = pLoggedInPort->pNextPort; - } // ... all Previously known ports checked - - // when the port_id changes, we must terminate - // all open exchanges. - cpqfcTSTerminateExchange( cpqfcHBAdata, NULL, PORTID_CHANGED); - - } - - // Replace the entire 24-bit port_id. We only know the - // lower 8 bits (alpa) from Tachyon; if a FLOGI is done, - // we'll get the upper 16-bits from the FLOGI ACC frame. - // If someone plugs into Fabric switch, we'll do FLOGI and - // get full 24-bit port_id; someone could then remove and - // hot-plug us into a dumb hub. If we send a 24-bit PLOGI - // to a "private" loop device, it might blow up. - // Consequently, we force the upper 16-bits of port_id to - // be re-set on every LinkUp transition - fcChip->Registers.my_al_pa = - (fcChip->Registers.rcv_al_pa.value >> 16) & 0xFF; - - - // copy frame manager status to unused ULONG slot - fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[1] = - fcChip->Registers.my_al_pa; // (for debugging) - - // for TachLite, we need to write the acquired al_pa - // back into the FMconfig register, because after - // first initialization, the AQ (prev. acq.) bit gets - // set, causing TL FM to use the AL_PA field in FMconfig. - // (In Tachyon, FM writes the acquired AL_PA for us.) - ulBuff = readl( fcChip->Registers.FMconfig.address); - ulBuff &= 0x00ffffffL; // mask out current al_pa - ulBuff |= ( fcChip->Registers.my_al_pa << 24 ); // or in acq. al_pa - fcChip->Registers.FMconfig.value = ulBuff; // copy it back - writel( fcChip->Registers.FMconfig.value, // put in TachLite - fcChip->Registers.FMconfig.address); - - -#ifdef IMQ_DEBUG - printk("#LUp %Xh, FMstat 0x%08X#", - fcChip->Registers.my_al_pa, fcChip->Registers.FMstatus.value); -#endif - - // also set the WRITE-ONLY My_ID Register (for Fabric - // initialization) - writel( fcChip->Registers.my_al_pa, - fcChip->Registers.ReMapMemBase +TL_MEM_TACH_My_ID); - - - fcChip->fcStats.linkUp++; - - // reset TL statistics counters - // (we ignore these error counters - // while link is down) - ulBuff = // just reset TL's counter - readl( fcChip->Registers.FMLinkStatus1.address); - - ulBuff = // just reset TL's counter - readl( fcChip->Registers.FMLinkStatus2.address); - - // for initiator, need to start verifying ports (e.g. PDISC) - - - - - - - CpqTsUnFreezeTachlite( fcChip, 2); // unfreeze Tachlite, if Link OK - - // Tachyon creates an interesting problem for us on LILP frames. - // Instead of writing the incoming LILP frame into the SFQ before - // indicating LINK UP (the actual order of events), Tachyon tells - // us LINK UP, and later us the LILP. So we delay, then examine the - // IMQ for an Inbound CM (x04); if found, we can set - // LINKACTIVE after processing the LILP. Otherwise, just proceed. - // Since Tachyon imposes this time delay (and doesn't tell us - // what it is), we have to impose a delay before "Peeking" the IMQ - // for Tach hardware (DMA) delivery. - // Processing LILP is required by SANMark - udelay( 1000); // microsec delay waiting for LILP (if it comes) - if( PeekIMQEntry( fcChip, ELS_LILP_FRAME) ) - { // found SFQ LILP, which will post LINKACTIVE -// printk("skipping LINKACTIVE post\n"); - - } - else - cpqfcTSPutLinkQue( cpqfcHBAdata, LINKACTIVE, ulFibreFrame); - } - - - - // ******* Set Fabric Login indication ******** - if( fcChip->Registers.FMstatus.value & 0x2000 ) - { - printk(" #Fabric# "); - fcChip->Options.fabric = 1; - } - else - fcChip->Options.fabric = 0; - - - - // ******* LIP(F8,x) or BAD AL_PA? ******** - if( fcChip->Registers.FMstatus.value & 0x30000L ) - { - // copy the error AL_PAs - fcChip->Registers.rcv_al_pa.value = - readl(fcChip->Registers.rcv_al_pa.address); - - // Bad AL_PA? - if( fcChip->Registers.FMstatus.value & 0x10000L ) - { - PFC_LOGGEDIN_PORT pLoggedInPort; - - // copy "BAD" al_pa field - fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[1] = - (fcChip->Registers.rcv_al_pa.value & 0xff00L) >> 8; - - pLoggedInPort = fcFindLoggedInPort( fcChip, - NULL, // DON'T search Scsi Nexus - fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[1], // port id - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - if( pLoggedInPort ) - { - // Just in case we got this BAD_ALPA because a device - // quietly disappeared (can happen on non-managed hubs such - // as the Vixel Rapport 1000), - // do an Implicit Logout. We never expect this on a Logged - // in port (but do expect it on port discovery). - // (As a reasonable alternative, this could be changed to - // simply start the implicit logout timer, giving the device - // several seconds to "come back".) - // - printk(" #BAD alpa %Xh# ", - fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[1]); - cpqfcTSImplicitLogout( cpqfcHBAdata, pLoggedInPort); - } - } - // LIP(f8,x)? - if( fcChip->Registers.FMstatus.value & 0x20000L ) - { - // for debugging, copy al_pa field - fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[2] = - (fcChip->Registers.rcv_al_pa.value & 0xffL); - // get the other port's al_pa - // (one that sent LIP(F8,?) ) - } - } - - // Elastic store err - if( fcChip->Registers.FMstatus.value & 0x400L ) - { - // don't count e-s if loop is down! - if( !(USHORT)(fcChip->Registers.FMstatus.value & 0x80) ) - fcChip->fcStats.e_stores++; - - } - } - break; - - - case INBOUND_FCP_XCHG_COMPLETION: // 0x0C - - // Remarks: - // On Tachlite TL/TS, we get this message when the data phase - // of a SEST inbound transfer is complete. For example, if a WRITE command - // was received with OX_ID 0, we might respond with XFER_RDY with - // RX_ID 8001. This would start the SEST controlled data phases. When - // all data frames are received, we get this inbound completion. This means - // we should send a status frame to complete the status phase of the - // FCP-SCSI exchange, using the same OX_ID,RX_ID that we used for data - // frames. - // See Outbound CM discussion of x_IDs - // Psuedo Code - // Get SEST index (x_ID) - // x_ID out of range, return (err condition) - // set status bits from 2nd dword - // free transactionID & SEST entry - // call fcComplete with transactionID & status - - ulBuff = fcChip->IMQ->QEntry[fcChip->IMQ->consumerIndex].word[0]; - x_ID = ulBuff & 0x7fffL; // lower 14 bits SEST_Index/Trans_ID - // (mask out MSB "direction" bit) - // Range check CM OX/RX_ID value... - if( x_ID < TACH_SEST_LEN ) // don't go beyond SEST array space - { - -//#define FCP_COMPLETION_DBG 1 -#ifdef FCP_COMPLETION_DBG - printk(" FCP_CM x_ID %Xh, status %Xh, Cmnd %p\n", - x_ID, ulBuff, Exchanges->fcExchange[x_ID].Cmnd); -#endif - if( ulBuff & 0x08000000L ) // RPC -Response Phase Complete - or - - // time to send response frame? - RPCset = 1; // (SEST transaction) - else - RPCset = 0; - // set the status for this Inbound SCSI transaction's ID - dwStatus = 0L; - if( ulBuff & 0x70000000L ) // any errs? - { - - if( ulBuff & 0x40000000L ) - dwStatus |= LINKFAIL_RX; - - if( ulBuff & 0x20000000L ) - dwStatus |= COUNT_ERROR; - - if( ulBuff & 0x10000000L ) - dwStatus |= OVERFLOW; - } - - - // FCP transaction done - copy status - Exchanges->fcExchange[ x_ID ].status = dwStatus; - - - // Did the exchange get an FCP-RSP response frame? - // (Note the little endian/big endian FC payload difference) - - if( RPCset ) // SEST transaction Response frame rec'd - { - // complete the command in our driver... - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev,fcChip, x_ID); - - } // end "RPCset" - - else // ("target" logic) - { - // Tachlite says all data frames have been received - now it's time - // to analyze data transfer (successful?), then send a response - // frame for this exchange - - ulFibreFrame[0] = x_ID; // copy for later reference - - // if this was a TWE, we have to send satus response - if( Exchanges->fcExchange[ x_ID].type == SCSI_TWE ) - { -// fcPutScsiQue( cpqfcHBAdata, -// NEED_FCP_RSP, ulFibreFrame); // (ulFibreFrame not used here) - } - } - } - else // ERROR CONDITION! bogus x_ID in completion message - { - printk("IN FCP_XCHG: bad x_ID: %Xh\n", x_ID); - } - - break; - - - - - case INBOUND_SCSI_DATA_COMMAND: - case BAD_SCSI_FRAME: - case INB_SCSI_STATUS_COMPLETION: - case BUFFER_PROCESSED_COMPLETION: - break; - } - - // Tachyon is producing; - // we are consuming - fcChip->IMQ->consumerIndex++; // increment OUR consumerIndex - if( fcChip->IMQ->consumerIndex >= IMQ_LEN)// check for rollover - fcChip->IMQ->consumerIndex = 0L; // reset it - - - if( fcChip->IMQ->producerIndex == fcChip->IMQ->consumerIndex ) - { // all Messages are processed - - iStatus = 0; // no more messages to process - - } - else - iStatus = 1; // more messages to process - - // update TachLite's ConsumerIndex... (clears INTA_L) - // NOTE: according to TL/TS UG, the - // "host must return completion messages in sequential order". - // Does this mean one at a time, in the order received? We - // presume so. - - writel( fcChip->IMQ->consumerIndex, - (fcChip->Registers.ReMapMemBase + IMQ_CONSUMER_INDEX)); - -#if IMQ_DEBUG - printk("Process IMQ: writing consumer ndx %d\n ", - fcChip->IMQ->consumerIndex); - printk("PI %X, CI %X\n", - fcChip->IMQ->producerIndex,fcChip->IMQ->consumerIndex ); -#endif - - - - } - else - { - // hmmm... why did we get interrupted/called with no message? - iStatus = -1; // nothing to process -#if IMQ_DEBUG - printk("Process IMQ: no message PI %Xh CI %Xh", - fcChip->IMQ->producerIndex, - fcChip->IMQ->consumerIndex); -#endif - } - - LEAVE("ProcessIMQEntry"); - - return iStatus; -} - - - - - -// This routine initializes Tachyon according to the following -// options (opcode1): -// 1 - RESTART Tachyon, simulate power on condition by shutting -// down laser, resetting the hardware, de-allocating all buffers; -// continue -// 2 - Config Tachyon / PCI registers; -// continue -// 3 - Allocating memory and setting Tachyon queues (write Tachyon regs); -// continue -// 4 - Config frame manager registers, initialize, turn on laser -// -// Returns: -// -1 on fatal error -// 0 on success - -int CpqTsInitializeTachLite( void *pHBA, int opcode1, int opcode2) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA*)pHBA; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - ULONG ulBuff; - UCHAR bBuff; - int iStatus=-1; // assume failure - - ENTER("InitializeTachLite"); - - // verify board's base address (sanity check) - - if( !fcChip->Registers.ReMapMemBase) // NULL address for card? - return -1; // FATAL error! - - - - switch( opcode1 ) - { - case 1: // restore hardware to power-on (hard) restart - - - iStatus = fcChip->ResetTachyon( - cpqfcHBAdata, opcode2); // laser off, reset hardware - // de-allocate aligned buffers - - -/* TBD // reset FC link Q (producer and consumer = 0) - fcLinkQReset(cpqfcHBAdata); - -*/ - - if( iStatus ) - break; - - case 2: // Config PCI/Tachyon registers - // NOTE: For Tach TL/TS, bit 31 must be set to 1. For TS chips, a read - // of bit 31 indicates state of M66EN signal; if 1, chip may run at - // 33-66MHz (see TL/TS UG, pg 159) - - ulBuff = 0x80000000; // TachLite Configuration Register - - writel( ulBuff, fcChip->Registers.TYconfig.address); -// ulBuff = 0x0147L; // CpqTs PCI CFGCMD register -// WritePCIConfiguration( fcChip->Backplane.bus, -// fcChip->Backplane.slot, TLCFGCMD, ulBuff, 4); -// ulBuff = 0x0L; // test! -// ReadPCIConfiguration( fcChip->Backplane.bus, -// fcChip->Backplane.slot, TLCFGCMD, &ulBuff, 4); - - // read back for reference... - fcChip->Registers.TYconfig.value = - readl( fcChip->Registers.TYconfig.address ); - - // what is the PCI bus width? - pci_read_config_byte( cpqfcHBAdata->PciDev, - 0x43, // PCIMCTR offset - &bBuff); - - fcChip->Registers.PCIMCTR = bBuff; - - // set string identifying the chip on the circuit board - - fcChip->Registers.TYstatus.value = - readl( fcChip->Registers.TYstatus.address); - - { -// Now that we are supporting multiple boards, we need to change -// this logic to check for PCI vendor/device IDs... -// for now, quick & dirty is simply checking Chip rev - - ULONG RevId = (fcChip->Registers.TYstatus.value &0x3E0)>>5; - UCHAR Minor = (UCHAR)(RevId & 0x3); - UCHAR Major = (UCHAR)((RevId & 0x1C) >>2); - - /* printk(" HBA Tachyon RevId %d.%d\n", Major, Minor); */ - if( (Major == 1) && (Minor == 2) ) - { - sprintf( cpqfcHBAdata->fcChip.Name, STACHLITE66_TS12); - - } - else if( (Major == 1) && (Minor == 3) ) - { - sprintf( cpqfcHBAdata->fcChip.Name, STACHLITE66_TS13); - } - else if( (Major == 2) && (Minor == 1) ) - { - sprintf( cpqfcHBAdata->fcChip.Name, SAGILENT_XL2_21); - } - else - sprintf( cpqfcHBAdata->fcChip.Name, STACHLITE_UNKNOWN); - } - - - - case 3: // allocate mem, set Tachyon Que registers - iStatus = CpqTsCreateTachLiteQues( cpqfcHBAdata, opcode2); - - if( iStatus ) - break; - - // now that the Queues exist, Tach can DMA to them, so - // we can begin processing INTs - // INTEN register - enable INT (TachLite interrupt) - writeb( 0x1F, fcChip->Registers.ReMapMemBase + IINTEN); - - // Fall through - case 4: // Config Fame Manager, Init Loop Command, laser on - - // L_PORT or loopback - // depending on Options - iStatus = CpqTsInitializeFrameManager( fcChip,0 ); - if( iStatus ) - { - // failed to initialize Frame Manager - break; - } - - default: - break; - } - LEAVE("InitializeTachLite"); - - return iStatus; -} - - - - -// Depending on the type of platform memory allocation (e.g. dynamic), -// it's probably best to free memory in opposite order as it was allocated. -// Order of allocation: see other function - - -int CpqTsDestroyTachLiteQues( void *pHBA, int opcode) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA*)pHBA; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - USHORT i, iStatus=0; - void* vPtr; // mem Align manager sets this to the freed address on success - unsigned long ulPtr; // for 64-bit pointer cast (e.g. Alpa machine) - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PSGPAGES j, next; - - ENTER("DestroyTachLiteQues"); - - if( fcChip->SEST ) - { - // search out and free Pool for Extended S/G list pages - - for( i=0; i < TACH_SEST_LEN; i++) // for each exchange - { - // It's possible that extended S/G pages were allocated, mapped, and - // not cleared due to error conditions or O/S driver termination. - // Make sure they're all gone. - if (Exchanges->fcExchange[i].Cmnd != NULL) - cpqfc_pci_unmap(cpqfcHBAdata->PciDev, Exchanges->fcExchange[i].Cmnd, - fcChip, i); // undo DMA mappings. - - for (j=fcChip->SEST->sgPages[i] ; j != NULL ; j = next) { - next = j->next; - kfree(j); - } - fcChip->SEST->sgPages[i] = NULL; - } - ulPtr = (unsigned long)fcChip->SEST; - vPtr = fcMemManager( cpqfcHBAdata->PciDev, - &cpqfcHBAdata->dynamic_mem[0], - 0,0, (ULONG)ulPtr, NULL ); // 'free' mem - fcChip->SEST = 0L; // null invalid ptr - if( !vPtr ) - { - printk("SEST mem not freed\n"); - iStatus = -1; - } - } - - if( fcChip->SFQ ) - { - - ulPtr = (unsigned long)fcChip->SFQ; - vPtr = fcMemManager( cpqfcHBAdata->PciDev, - &cpqfcHBAdata->dynamic_mem[0], - 0,0, (ULONG)ulPtr, NULL ); // 'free' mem - fcChip->SFQ = 0L; // null invalid ptr - if( !vPtr ) - { - printk("SFQ mem not freed\n"); - iStatus = -2; - } - } - - - if( fcChip->IMQ ) - { - // clear Indexes to show empty Queue - fcChip->IMQ->producerIndex = 0; - fcChip->IMQ->consumerIndex = 0; - - ulPtr = (unsigned long)fcChip->IMQ; - vPtr = fcMemManager( cpqfcHBAdata->PciDev, &cpqfcHBAdata->dynamic_mem[0], - 0,0, (ULONG)ulPtr, NULL ); // 'free' mem - fcChip->IMQ = 0L; // null invalid ptr - if( !vPtr ) - { - printk("IMQ mem not freed\n"); - iStatus = -3; - } - } - - if( fcChip->ERQ ) // release memory blocks used by the queues - { - ulPtr = (unsigned long)fcChip->ERQ; - vPtr = fcMemManager( cpqfcHBAdata->PciDev, &cpqfcHBAdata->dynamic_mem[0], - 0,0, (ULONG)ulPtr, NULL ); // 'free' mem - fcChip->ERQ = 0L; // null invalid ptr - if( !vPtr ) - { - printk("ERQ mem not freed\n"); - iStatus = -4; - } - } - - // free up the primary EXCHANGES struct and Link Q - cpqfc_free_dma_consistent(cpqfcHBAdata); - - LEAVE("DestroyTachLiteQues"); - - return iStatus; // non-zero (failed) if any memory not freed -} - - - - - -// The SFQ is an array with SFQ_LEN length, each element (QEntry) -// with eight 32-bit words. TachLite places incoming FC frames (i.e. -// a valid FC frame with our AL_PA ) in contiguous SFQ entries -// and sends a completion message telling the host where the frame is -// in the que. -// This function copies the current (or oldest not-yet-processed) QEntry to -// a caller's contiguous buffer and updates the Tachyon chip's consumer index -// -// NOTE: -// An FC frame may consume one or many SFQ entries. We know the total -// length from the completion message. The caller passes a buffer large -// enough for the complete message (max 2k). - -static void CpqTsGetSFQEntry( - PTACHYON fcChip, - USHORT producerNdx, - ULONG *ulDestPtr, // contiguous destination buffer - BOOLEAN UpdateChip) -{ - ULONG total_bytes=0; - ULONG consumerIndex = fcChip->SFQ->consumerIndex; - - // check passed copy of SFQ producer index - - // is a new message waiting for us? - // equal indexes means SFS is copied - - while( producerNdx != consumerIndex ) - { // need to process message - total_bytes += 64; // maintain count to prevent writing past buffer - // don't allow copies over Fibre Channel defined length! - if( total_bytes <= 2048 ) - { - memcpy( ulDestPtr, - &fcChip->SFQ->QEntry[consumerIndex], - 64 ); // each SFQ entry is 64 bytes - ulDestPtr += 16; // advance pointer to next 64 byte block - } - // Tachyon is producing, - // and we are consuming - - if( ++consumerIndex >= SFQ_LEN)// check for rollover - consumerIndex = 0L; // reset it - } - - // if specified, update the Tachlite chip ConsumerIndex... - if( UpdateChip ) - { - fcChip->SFQ->consumerIndex = consumerIndex; - writel( fcChip->SFQ->consumerIndex, - fcChip->Registers.SFQconsumerIndex.address); - } -} - - - -// TachLite routinely freezes it's core ques - Outbound FIFO, Inbound FIFO, -// and Exchange Request Queue (ERQ) on error recover - -// (e.g. whenever a LIP occurs). Here -// we routinely RESUME by clearing these bits, but only if the loop is up -// to avoid ERROR IDLE messages forever. - -void CpqTsUnFreezeTachlite( void *pChip, int type ) -{ - PTACHYON fcChip = (PTACHYON)pChip; - fcChip->Registers.TYcontrol.value = - readl(fcChip->Registers.TYcontrol.address); - - // (bit 4 of value is GBIC LASER) - // if we 'unfreeze' the core machines before the loop is healthy - // (i.e. FLT, OS, LS failure bits set in FMstatus) - // we can get 'error idle' messages forever. Verify that - // FMstatus (Link Status) is OK before unfreezing. - - if( !(fcChip->Registers.FMstatus.value & 0x07000000L) && // bits clear? - !(fcChip->Registers.FMstatus.value & 0x80 )) // Active LPSM? - { - fcChip->Registers.TYcontrol.value &= ~0x300L; // clear FEQ, FFA - if( type == 1 ) // unfreeze ERQ only - { -// printk("Unfreezing ERQ\n"); - fcChip->Registers.TYcontrol.value |= 0x10000L; // set REQ - } - else // unfreeze both ERQ and FCP-ASSIST (SEST) - { -// printk("Unfreezing ERQ & FCP-ASSIST\n"); - - // set ROF, RIF, REQ - resume Outbound FCP, Inbnd FCP, ERQ - fcChip->Registers.TYcontrol.value |= 0x70000L; // set ROF, RIF, REQ - } - - writel( fcChip->Registers.TYcontrol.value, - fcChip->Registers.TYcontrol.address); - - } - // readback for verify (TachLite still frozen?) - fcChip->Registers.TYstatus.value = - readl(fcChip->Registers.TYstatus.address); -} - - -// Whenever an FC Exchange Abort is required, we must manipulate the -// Host/Tachyon shared memory SEST table. Before doing this, we -// must freeze Tachyon, which flushes certain buffers and ensure we -// can manipulate the SEST without contention. -// This freeze function will result in FCP & ERQ FROZEN completion -// messages (per argument "type"). - -void CpqTsFreezeTachlite( void *pChip, int type ) -{ - PTACHYON fcChip = (PTACHYON)pChip; - fcChip->Registers.TYcontrol.value = - readl(fcChip->Registers.TYcontrol.address); - - //set FFA, FEQ - freezes SCSI assist and ERQ - if( type == 1) // freeze ERQ only - fcChip->Registers.TYcontrol.value |= 0x100L; // (bit 4 is laser) - else // freeze both FCP assists (SEST) and ERQ - fcChip->Registers.TYcontrol.value |= 0x300L; // (bit 4 is laser) - - writel( fcChip->Registers.TYcontrol.value, - fcChip->Registers.TYcontrol.address); - -} - - - - -// TL has two Frame Manager Link Status Registers, with three 8-bit -// fields each. These eight bit counters are cleared after each read, -// so we define six 32-bit accumulators for these TL counters. This -// function breaks out each 8-bit field and adds the value to the existing -// sum. (s/w counters cleared independently) - -void fcParseLinkStatusCounters(PTACHYON fcChip) -{ - UCHAR bBuff; - ULONG ulBuff; - - -// The BB0 timer usually increments when TL is initialized, resulting -// in an initially bogus count. If our own counter is ZERO, it means we -// are reading this thing for the first time, so we ignore the first count. -// Also, reading the register does not clear it, so we have to keep an -// additional static counter to detect rollover (yuk). - - if( fcChip->fcStats.lastBB0timer == 0L) // TL was reset? (ignore 1st values) - { - // get TL's register counter - the "last" count - fcChip->fcStats.lastBB0timer = - fcChip->Registers.FMBB_CreditZero.value & 0x00ffffffL; - } - else // subsequent pass - check for rollover - { - // "this" count - ulBuff = fcChip->Registers.FMBB_CreditZero.value & 0x00ffffffL; - if( fcChip->fcStats.lastBB0timer > ulBuff ) // rollover happened - { - // counter advanced to max... - fcChip->fcStats.BB0_Timer += (0x00FFFFFFL - fcChip->fcStats.lastBB0timer); - fcChip->fcStats.BB0_Timer += ulBuff; // plus some more - - - } - else // no rollover -- more counts or no change - { - fcChip->fcStats.BB0_Timer += (ulBuff - fcChip->fcStats.lastBB0timer); - - } - - fcChip->fcStats.lastBB0timer = ulBuff; - } - - - - bBuff = (UCHAR)(fcChip->Registers.FMLinkStatus1.value >> 24); - fcChip->fcStats.LossofSignal += bBuff; - - bBuff = (UCHAR)(fcChip->Registers.FMLinkStatus1.value >> 16); - fcChip->fcStats.BadRXChar += bBuff; - - bBuff = (UCHAR)(fcChip->Registers.FMLinkStatus1.value >> 8); - fcChip->fcStats.LossofSync += bBuff; - - - bBuff = (UCHAR)(fcChip->Registers.FMLinkStatus2.value >> 24); - fcChip->fcStats.Rx_EOFa += bBuff; - - bBuff = (UCHAR)(fcChip->Registers.FMLinkStatus2.value >> 16); - fcChip->fcStats.Dis_Frm += bBuff; - - bBuff = (UCHAR)(fcChip->Registers.FMLinkStatus2.value >> 8); - fcChip->fcStats.Bad_CRC += bBuff; -} - - -void cpqfcTSClearLinkStatusCounters(PTACHYON fcChip) -{ - ENTER("ClearLinkStatusCounters"); - memset( &fcChip->fcStats, 0, sizeof( FCSTATS)); - LEAVE("ClearLinkStatusCounters"); - -} - - - - -// The following function reads the I2C hardware to get the adapter's -// World Wide Name (WWN). -// If the WWN is "500805f1fadb43e8" (as printed on the card), the -// Tachyon WWN_hi (32-bit) register is 500805f1, and WWN_lo register -// is fadb43e8. -// In the NVRAM, the bytes appear as: -// [2d] .. -// [2e] .. -// [2f] 50 -// [30] 08 -// [31] 05 -// [32] f1 -// [33] fa -// [34] db -// [35] 43 -// [36] e8 -// -// In the Fibre Channel (Big Endian) format, the FC-AL LISM frame will -// be correctly loaded by Tachyon silicon. In the login payload, bytes -// must be correctly swapped for Big Endian format. - -int CpqTsReadWriteWWN( PVOID pChip, int Read) -{ - PTACHYON fcChip = (PTACHYON)pChip; -#define NVRAM_SIZE 512 - unsigned short i, count = NVRAM_SIZE; - UCHAR nvRam[NVRAM_SIZE], WWNbuf[8]; - ULONG ulBuff; - int iStatus=-1; // assume failure - int WWNoffset; - - ENTER("ReadWriteWWN"); - // Now try to read the WWN from the adapter's NVRAM - - if( Read ) // READing NVRAM WWN? - { - ulBuff = cpqfcTS_ReadNVRAM( fcChip->Registers.TYstatus.address, - fcChip->Registers.TYcontrol.address, - count, &nvRam[0] ); - - if( ulBuff ) // NVRAM read successful? - { - iStatus = 0; // success! - - // for engineering/ prototype boards, the data may be - // invalid (GIGO, usually all "FF"); this prevents the - // parse routine from working correctly, which means - // nothing will be written to our passed buffer. - - WWNoffset = cpqfcTS_GetNVRAM_data( WWNbuf, nvRam ); - - if( !WWNoffset ) // uninitialized NVRAM -- copy bytes directly - { - printk( "CAUTION: Copying NVRAM data on fcChip\n"); - for( i= 0; i < 8; i++) - WWNbuf[i] = nvRam[i +0x2f]; // dangerous! some formats won't work - } - - fcChip->Registers.wwn_hi = 0L; - fcChip->Registers.wwn_lo = 0L; - for( i=0; i<4; i++) // WWN bytes are big endian in NVRAM - { - ulBuff = 0L; - ulBuff = (ULONG)(WWNbuf[i]) << (8 * (3-i)); - fcChip->Registers.wwn_hi |= ulBuff; - } - for( i=0; i<4; i++) // WWN bytes are big endian in NVRAM - { - ulBuff = 0L; - ulBuff = (ULONG)(WWNbuf[i+4]) << (8 * (3-i)); - fcChip->Registers.wwn_lo |= ulBuff; - } - } // done reading - else - { - - printk( "cpqfcTS: NVRAM read failed\n"); - - } - } - - else // WRITE - { - - // NOTE: WRITE not supported & not used in released driver. - - - printk("ReadWriteNRAM: can't write NVRAM; aborting write\n"); - } - - LEAVE("ReadWriteWWN"); - return iStatus; -} - - - - - -// The following function reads or writes the entire "NVRAM" contents of -// the I2C hardware (i.e. the NM24C03). Note that HP's 5121A (TS 66Mhz) -// adapter does not use the NM24C03 chip, so this function only works on -// Compaq's adapters. - -int CpqTsReadWriteNVRAM( PVOID pChip, PVOID buf, int Read) -{ - PTACHYON fcChip = (PTACHYON)pChip; -#define NVRAM_SIZE 512 - ULONG ulBuff; - UCHAR *ucPtr = buf; // cast caller's void ptr to UCHAR array - int iStatus=-1; // assume failure - - - if( Read ) // READing NVRAM? - { - ulBuff = cpqfcTS_ReadNVRAM( // TRUE on success - fcChip->Registers.TYstatus.address, - fcChip->Registers.TYcontrol.address, - 256, // bytes to write - ucPtr ); // source ptr - - - if( ulBuff ) - iStatus = 0; // success - else - { -#ifdef DBG - printk( "CAUTION: NVRAM read failed\n"); -#endif - } - } // done reading - - else // WRITING NVRAM - { - - printk("cpqfcTS: WRITE of FC Controller's NVRAM disabled\n"); - } - - return iStatus; -} diff --git a/drivers/scsi/cpqfcTSi2c.c b/drivers/scsi/cpqfcTSi2c.c deleted file mode 100644 index b38a6a9a55a..00000000000 --- a/drivers/scsi/cpqfcTSi2c.c +++ /dev/null @@ -1,493 +0,0 @@ -/* Copyright(c) 2000, Compaq Computer Corporation - * Fibre Channel Host Bus Adapter - * 64-bit, 66MHz PCI - * Originally developed and tested on: - * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... - * SP# P225CXCBFIEL6T, Rev XC - * SP# 161290-001, Rev XD - * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Written by Don Zimmerman -*/ -// These functions control the NVRAM I2C hardware on -// non-intelligent Fibre Host Adapters. -// The primary purpose is to read the HBA's NVRAM to get adapter's -// manufactured WWN to copy into Tachyon chip registers -// Orignal source author unknown - -#include <linux/types.h> -enum boolean { FALSE, TRUE } ; - - -#ifndef UCHAR -typedef __u8 UCHAR; -#endif -#ifndef BOOLEAN -typedef __u8 BOOLEAN; -#endif -#ifndef USHORT -typedef __u16 USHORT; -#endif -#ifndef ULONG -typedef __u32 ULONG; -#endif - - -#include <linux/string.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <asm/io.h> // struct pt_regs for IRQ handler & Port I/O - -#include "cpqfcTSchip.h" - -static void tl_i2c_tx_byte( void* GPIOout, UCHAR data ); -/*static BOOLEAN tl_write_i2c_page_portion( void* GPIOin, void* GPIOout, - USHORT startOffset, // e.g. 0x2f for WWN start - USHORT count, - UCHAR *buf ); -*/ - -// -// Tachlite GPIO2, GPIO3 (I2C) DEFINES -// The NVRAM chip NM24C03 defines SCL (serial clock) and SDA (serial data) -// GPIO2 drives SDA, and GPIO3 drives SCL -// -// Since Tachlite inverts the state of the GPIO 0-3 outputs, SET writes 0 -// and clear writes 1. The input lines (read in TL status) is NOT inverted -// This really helps confuse the code and debugging. - -#define SET_DATA_HI 0x0 -#define SET_DATA_LO 0x8 -#define SET_CLOCK_HI 0x0 -#define SET_CLOCK_LO 0x4 - -#define SENSE_DATA_HI 0x8 -#define SENSE_DATA_LO 0x0 -#define SENSE_CLOCK_HI 0x4 -#define SENSE_CLOCK_LO 0x0 - -#define SLAVE_READ_ADDRESS 0xA1 -#define SLAVE_WRITE_ADDRESS 0xA0 - - -static void i2c_delay(ULONG mstime); -static void tl_i2c_clock_pulse( UCHAR , void* GPIOout); -static UCHAR tl_read_i2c_data( void* ); - - -//----------------------------------------------------------------------------- -// -// Name: I2C_RX_ACK -// -// This routine receives an acknowledge over the I2C bus. -// -//----------------------------------------------------------------------------- -static unsigned short tl_i2c_rx_ack( void* GPIOin, void* GPIOout ) -{ - unsigned long value; - - // do clock pulse, let data line float high - tl_i2c_clock_pulse( SET_DATA_HI, GPIOout ); - - // slave must drive data low for acknowledge - value = tl_read_i2c_data( GPIOin); - if (value & SENSE_DATA_HI ) - return( FALSE ); - - return( TRUE ); -} -//----------------------------------------------------------------------------- -// -// Name: READ_I2C_REG -// -// This routine reads the I2C control register using the global -// IO address stored in gpioreg. -// -//----------------------------------------------------------------------------- -static UCHAR tl_read_i2c_data( void* gpioreg ) -{ - return( (UCHAR)(readl( gpioreg ) & 0x08L) ); // GPIO3 -} -//----------------------------------------------------------------------------- -// -// Name: WRITE_I2C_REG -// -// This routine writes the I2C control register using the global -// IO address stored in gpioreg. -// In Tachlite, we don't want to modify other bits in TL Control reg. -// -//----------------------------------------------------------------------------- -static void tl_write_i2c_reg( void* gpioregOUT, UCHAR value ) -{ - ULONG temp; - - // First read the register and clear out the old bits - temp = readl( gpioregOUT ) & 0xfffffff3L; - - // Now or in the new data and send it back out - writel( temp | value, gpioregOUT); -} -//----------------------------------------------------------------------------- -// -// Name: I2C_TX_START -// -// This routine transmits a start condition over the I2C bus. -// 1. Set SCL (clock, GPIO2) HIGH, set SDA (data, GPIO3) HIGH, -// wait 5us to stabilize. -// 2. With SCL still HIGH, drive SDA low. The low transition marks -// the start condition to NM24Cxx (the chip) -// NOTE! In TL control reg., output 1 means chip sees LOW -// -//----------------------------------------------------------------------------- -static unsigned short tl_i2c_tx_start( void* GPIOin, void* GPIOout ) -{ - unsigned short i; - ULONG value; - - if ( !(tl_read_i2c_data(GPIOin) & SENSE_DATA_HI)) - { - // start with clock high, let data float high - tl_write_i2c_reg( GPIOout, SET_DATA_HI | SET_CLOCK_HI ); - - // keep sending clock pulses if slave is driving data line - for (i = 0; i < 10; i++) - { - tl_i2c_clock_pulse( SET_DATA_HI, GPIOout ); - - if ( tl_read_i2c_data(GPIOin) & SENSE_DATA_HI ) - break; - } - - // if he's still driving data low after 10 clocks, abort - value = tl_read_i2c_data( GPIOin ); // read status - if (!(value & 0x08) ) - return( FALSE ); - } - - - // To START, bring data low while clock high - tl_write_i2c_reg( GPIOout, SET_CLOCK_HI | SET_DATA_LO ); - - i2c_delay(0); - - return( TRUE ); // TX start successful -} -//----------------------------------------------------------------------------- -// -// Name: I2C_TX_STOP -// -// This routine transmits a stop condition over the I2C bus. -// -//----------------------------------------------------------------------------- - -static unsigned short tl_i2c_tx_stop( void* GPIOin, void* GPIOout ) -{ - int i; - - for (i = 0; i < 10; i++) - { - // Send clock pulse, drive data line low - tl_i2c_clock_pulse( SET_DATA_LO, GPIOout ); - - // To STOP, bring data high while clock high - tl_write_i2c_reg( GPIOout, SET_DATA_HI | SET_CLOCK_HI ); - - // Give the data line time to float high - i2c_delay(0); - - // If slave is driving data line low, there's a problem; retry - if ( tl_read_i2c_data(GPIOin) & SENSE_DATA_HI ) - return( TRUE ); // TX STOP successful! - } - - return( FALSE ); // error -} -//----------------------------------------------------------------------------- -// -// Name: I2C_TX_uchar -// -// This routine transmits a byte across the I2C bus. -// -//----------------------------------------------------------------------------- -static void tl_i2c_tx_byte( void* GPIOout, UCHAR data ) -{ - UCHAR bit; - - for (bit = 0x80; bit; bit >>= 1) - { - if( data & bit ) - tl_i2c_clock_pulse( (UCHAR)SET_DATA_HI, GPIOout); - else - tl_i2c_clock_pulse( (UCHAR)SET_DATA_LO, GPIOout); - } -} -//----------------------------------------------------------------------------- -// -// Name: I2C_RX_uchar -// -// This routine receives a byte across the I2C bus. -// -//----------------------------------------------------------------------------- -static UCHAR tl_i2c_rx_byte( void* GPIOin, void* GPIOout ) -{ - UCHAR bit; - UCHAR data = 0; - - - for (bit = 0x80; bit; bit >>= 1) { - // do clock pulse, let data line float high - tl_i2c_clock_pulse( SET_DATA_HI, GPIOout ); - - // read data line - if ( tl_read_i2c_data( GPIOin) & 0x08 ) - data |= bit; - } - - return (data); -} -//***************************************************************************** -//***************************************************************************** -// Function: read_i2c_nvram -// Arguments: UCHAR count number of bytes to read -// UCHAR *buf area to store the bytes read -// Returns: 0 - failed -// 1 - success -//***************************************************************************** -//***************************************************************************** -unsigned long cpqfcTS_ReadNVRAM( void* GPIOin, void* GPIOout , USHORT count, - UCHAR *buf ) -{ - unsigned short i; - - if( !( tl_i2c_tx_start(GPIOin, GPIOout) )) - return FALSE; - - // Select the NVRAM for "dummy" write, to set the address - tl_i2c_tx_byte( GPIOout , SLAVE_WRITE_ADDRESS ); - if ( !tl_i2c_rx_ack(GPIOin, GPIOout ) ) - return( FALSE ); - - // Now send the address where we want to start reading - tl_i2c_tx_byte( GPIOout , 0 ); - if ( !tl_i2c_rx_ack(GPIOin, GPIOout ) ) - return( FALSE ); - - // Send a repeated start condition and select the - // slave for reading now. - if( tl_i2c_tx_start(GPIOin, GPIOout) ) - tl_i2c_tx_byte( GPIOout, SLAVE_READ_ADDRESS ); - - if ( !tl_i2c_rx_ack(GPIOin, GPIOout) ) - return( FALSE ); - - // this loop will now read out the data and store it - // in the buffer pointed to by buf - for ( i=0; i<count; i++) - { - *buf++ = tl_i2c_rx_byte(GPIOin, GPIOout); - - // Send ACK by holding data line low for 1 clock - if ( i < (count-1) ) - tl_i2c_clock_pulse( 0x08, GPIOout ); - else { - // Don't send ack for final byte - tl_i2c_clock_pulse( SET_DATA_HI, GPIOout ); - } - } - - tl_i2c_tx_stop(GPIOin, GPIOout); - - return( TRUE ); -} - -//**************************************************************** -// -// -// -// routines to set and clear the data and clock bits -// -// -// -//**************************************************************** - -static void tl_set_clock(void* gpioreg) -{ - ULONG ret_val; - - ret_val = readl( gpioreg ); - ret_val &= 0xffffffFBL; // clear GPIO2 (SCL) - writel( ret_val, gpioreg); -} - -static void tl_clr_clock(void* gpioreg) -{ - ULONG ret_val; - - ret_val = readl( gpioreg ); - ret_val |= SET_CLOCK_LO; - writel( ret_val, gpioreg); -} - -//***************************************************************** -// -// -// This routine will advance the clock by one period -// -// -//***************************************************************** -static void tl_i2c_clock_pulse( UCHAR value, void* GPIOout ) -{ - ULONG ret_val; - - // clear the clock bit - tl_clr_clock( GPIOout ); - - i2c_delay(0); - - - // read the port to preserve non-I2C bits - ret_val = readl( GPIOout ); - - // clear the data & clock bits - ret_val &= 0xFFFFFFf3; - - // write the value passed in... - // data can only change while clock is LOW! - ret_val |= value; // the data - ret_val |= SET_CLOCK_LO; // the clock - writel( ret_val, GPIOout ); - - i2c_delay(0); - - - //set clock bit - tl_set_clock( GPIOout); -} - - - - -//***************************************************************** -// -// -// This routine returns the 64-bit WWN -// -// -//***************************************************************** -int cpqfcTS_GetNVRAM_data( UCHAR *wwnbuf, UCHAR *buf ) -{ - ULONG len; - ULONG sub_len; - ULONG ptr_inc; - ULONG i; - ULONG j; - UCHAR *data_ptr; - UCHAR z; - UCHAR name; - UCHAR sub_name; - UCHAR done; - int iReturn=0; // def. 0 offset is failure to find WWN field - - - - data_ptr = (UCHAR *)buf; - - done = FALSE; - i = 0; - - while ( (i < 128) && (!done) ) - { - z = data_ptr[i];\ - if ( !(z & 0x80) ) - { - len = 1 + (z & 0x07); - - name = (z & 0x78) >> 3; - if (name == 0x0F) - done = TRUE; - } - else - { - name = z & 0x7F; - len = 3 + data_ptr[i+1] + (data_ptr[i+2] << 8); - - switch (name) - { - case 0x0D: - // - j = i + 3; - // - if ( data_ptr[j] == 0x3b ) { - len = 6; - break; - } - - while ( j<(i+len) ) { - sub_name = (data_ptr[j] & 0x3f); - sub_len = data_ptr[j+1] + - (data_ptr[j+2] << 8); - ptr_inc = sub_len + 3; - switch (sub_name) - { - case 0x3C: - memcpy( wwnbuf, &data_ptr[j+3], 8); - iReturn = j+3; - break; - default: - break; - } - j += ptr_inc; - } - break; - default: - break; - } - } - // - i += len; - } // end while - return iReturn; -} - - - - - -// define a short 5 micro sec delay, and longer (ms) delay - -static void i2c_delay(ULONG mstime) -{ - ULONG i; - -// NOTE: we only expect to use these delays when reading -// our adapter's NVRAM, which happens only during adapter reset. -// Delay technique from "Linux Device Drivers", A. Rubini -// (1st Ed.) pg 137. - -// printk(" delay %lx ", mstime); - if( mstime ) // ms delay? - { - // delay technique - for( i=0; i < mstime; i++) - udelay(1000); // 1ms per loop - - } - else // 5 micro sec delay - - udelay( 5 ); // micro secs - -// printk("done\n"); -} - - - diff --git a/drivers/scsi/cpqfcTSinit.c b/drivers/scsi/cpqfcTSinit.c deleted file mode 100644 index 3fda8d455c5..00000000000 --- a/drivers/scsi/cpqfcTSinit.c +++ /dev/null @@ -1,2096 +0,0 @@ -/* Copyright(c) 2000, Compaq Computer Corporation - * Fibre Channel Host Bus Adapter - * 64-bit, 66MHz PCI - * Originally developed and tested on: - * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... - * SP# P225CXCBFIEL6T, Rev XC - * SP# 161290-001, Rev XD - * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Written by Don Zimmerman - * IOCTL and procfs added by Jouke Numan - * SMP testing by Chel Van Gennip - * - * portions copied from: - * QLogic CPQFCTS SCSI-FCP - * Written by Erik H. Moe, ehm@cris.com - * Copyright 1995, Erik H. Moe - * Renamed and updated to 1.3.x by Michael Griffith <grif@cs.ucr.edu> - * Chris Loveland <cwl@iol.unh.edu> to support the isp2100 and isp2200 -*/ - - -#define LinuxVersionCode(v, p, s) (((v)<<16)+((p)<<8)+(s)) - -#include <linux/config.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/version.h> -#include <linux/blkdev.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/ioport.h> // request_region() prototype -#include <linux/completion.h> - -#include <asm/io.h> -#include <asm/uaccess.h> // ioctl related -#include <asm/irq.h> -#include <linux/spinlock.h> -#include "scsi.h" -#include <scsi/scsi_host.h> -#include <scsi/scsi_ioctl.h> -#include "cpqfcTSchip.h" -#include "cpqfcTSstructs.h" -#include "cpqfcTStrigger.h" - -#include "cpqfcTS.h" - -/* Embedded module documentation macros - see module.h */ -MODULE_AUTHOR("Compaq Computer Corporation"); -MODULE_DESCRIPTION("Driver for Compaq 64-bit/66Mhz PCI Fibre Channel HBA v. 2.5.4"); -MODULE_LICENSE("GPL"); - -int cpqfcTS_TargetDeviceReset( Scsi_Device *ScsiDev, unsigned int reset_flags); - -// This struct was originally defined in -// /usr/src/linux/include/linux/proc_fs.h -// since it's only partially implemented, we only use first -// few fields... -// NOTE: proc_fs changes in 2.4 kernel - -#if LINUX_VERSION_CODE < LinuxVersionCode(2,3,27) -static struct proc_dir_entry proc_scsi_cpqfcTS = -{ - PROC_SCSI_CPQFCTS, // ushort low_ino (enumerated list) - 7, // ushort namelen - DEV_NAME, // const char* name - S_IFDIR | S_IRUGO | S_IXUGO, // mode_t mode - 2 // nlink_t nlink - // etc. ... -}; - - -#endif - -#if LINUX_VERSION_CODE >= LinuxVersionCode(2,4,7) -# define CPQFC_DECLARE_COMPLETION(x) DECLARE_COMPLETION(x) -# define CPQFC_WAITING waiting -# define CPQFC_COMPLETE(x) complete(x) -# define CPQFC_WAIT_FOR_COMPLETION(x) wait_for_completion(x); -#else -# define CPQFC_DECLARE_COMPLETION(x) DECLARE_MUTEX_LOCKED(x) -# define CPQFC_WAITING sem -# define CPQFC_COMPLETE(x) up(x) -# define CPQFC_WAIT_FOR_COMPLETION(x) down(x) -#endif - -static int cpqfc_alloc_private_data_pool(CPQFCHBA *hba); - -/* local function to load our per-HBA (local) data for chip - registers, FC link state, all FC exchanges, etc. - - We allocate space and compute address offsets for the - most frequently accessed addresses; others (like World Wide - Name) are not necessary. -*/ -static void Cpqfc_initHBAdata(CPQFCHBA *cpqfcHBAdata, struct pci_dev *PciDev ) -{ - - cpqfcHBAdata->PciDev = PciDev; // copy PCI info ptr - - // since x86 port space is 64k, we only need the lower 16 bits - cpqfcHBAdata->fcChip.Registers.IOBaseL = - PciDev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK; - - cpqfcHBAdata->fcChip.Registers.IOBaseU = - PciDev->resource[2].start & PCI_BASE_ADDRESS_IO_MASK; - - // 32-bit memory addresses - cpqfcHBAdata->fcChip.Registers.MemBase = - PciDev->resource[3].start & PCI_BASE_ADDRESS_MEM_MASK; - - cpqfcHBAdata->fcChip.Registers.ReMapMemBase = - ioremap( PciDev->resource[3].start & PCI_BASE_ADDRESS_MEM_MASK, - 0x200); - - cpqfcHBAdata->fcChip.Registers.RAMBase = - PciDev->resource[4].start; - - cpqfcHBAdata->fcChip.Registers.SROMBase = // NULL for HP TS adapter - PciDev->resource[5].start; - - // now the Tachlite chip registers - // the REGISTER struct holds both the physical address & last - // written value (some TL registers are WRITE ONLY) - - cpqfcHBAdata->fcChip.Registers.SFQconsumerIndex.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_SFQ_CONSUMER_INDEX; - - cpqfcHBAdata->fcChip.Registers.ERQproducerIndex.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_ERQ_PRODUCER_INDEX; - - // TL Frame Manager - cpqfcHBAdata->fcChip.Registers.FMconfig.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_CONFIG; - cpqfcHBAdata->fcChip.Registers.FMcontrol.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_CONTROL; - cpqfcHBAdata->fcChip.Registers.FMstatus.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_STATUS; - cpqfcHBAdata->fcChip.Registers.FMLinkStatus1.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_LINK_STAT1; - cpqfcHBAdata->fcChip.Registers.FMLinkStatus2.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_LINK_STAT2; - cpqfcHBAdata->fcChip.Registers.FMBB_CreditZero.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_BB_CREDIT0; - - // TL Control Regs - cpqfcHBAdata->fcChip.Registers.TYconfig.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_TACH_CONFIG; - cpqfcHBAdata->fcChip.Registers.TYcontrol.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_TACH_CONTROL; - cpqfcHBAdata->fcChip.Registers.TYstatus.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_TACH_STATUS; - cpqfcHBAdata->fcChip.Registers.rcv_al_pa.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_RCV_AL_PA; - cpqfcHBAdata->fcChip.Registers.ed_tov.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + TL_MEM_FM_ED_TOV; - - - cpqfcHBAdata->fcChip.Registers.INTEN.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + IINTEN; - cpqfcHBAdata->fcChip.Registers.INTPEND.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + IINTPEND; - cpqfcHBAdata->fcChip.Registers.INTSTAT.address = - cpqfcHBAdata->fcChip.Registers.ReMapMemBase + IINTSTAT; - - DEBUG_PCI(printk(" cpqfcHBAdata->fcChip.Registers. :\n")); - DEBUG_PCI(printk(" IOBaseL = %x\n", - cpqfcHBAdata->fcChip.Registers.IOBaseL)); - DEBUG_PCI(printk(" IOBaseU = %x\n", - cpqfcHBAdata->fcChip.Registers.IOBaseU)); - - /* printk(" ioremap'd Membase: %p\n", cpqfcHBAdata->fcChip.Registers.ReMapMemBase); */ - - DEBUG_PCI(printk(" SFQconsumerIndex.address = %p\n", - cpqfcHBAdata->fcChip.Registers.SFQconsumerIndex.address)); - DEBUG_PCI(printk(" ERQproducerIndex.address = %p\n", - cpqfcHBAdata->fcChip.Registers.ERQproducerIndex.address)); - DEBUG_PCI(printk(" TYconfig.address = %p\n", - cpqfcHBAdata->fcChip.Registers.TYconfig.address)); - DEBUG_PCI(printk(" FMconfig.address = %p\n", - cpqfcHBAdata->fcChip.Registers.FMconfig.address)); - DEBUG_PCI(printk(" FMcontrol.address = %p\n", - cpqfcHBAdata->fcChip.Registers.FMcontrol.address)); - - // set default options for FC controller (chip) - cpqfcHBAdata->fcChip.Options.initiator = 1; // default: SCSI initiator - cpqfcHBAdata->fcChip.Options.target = 0; // default: SCSI target - cpqfcHBAdata->fcChip.Options.extLoopback = 0;// default: no loopback @GBIC - cpqfcHBAdata->fcChip.Options.intLoopback = 0;// default: no loopback inside chip - - // set highest and lowest FC-PH version the adapter/driver supports - // (NOT strict compliance) - cpqfcHBAdata->fcChip.highest_FCPH_ver = FC_PH3; - cpqfcHBAdata->fcChip.lowest_FCPH_ver = FC_PH43; - - // set function points for this controller / adapter - cpqfcHBAdata->fcChip.ResetTachyon = CpqTsResetTachLite; - cpqfcHBAdata->fcChip.FreezeTachyon = CpqTsFreezeTachlite; - cpqfcHBAdata->fcChip.UnFreezeTachyon = CpqTsUnFreezeTachlite; - cpqfcHBAdata->fcChip.CreateTachyonQues = CpqTsCreateTachLiteQues; - cpqfcHBAdata->fcChip.DestroyTachyonQues = CpqTsDestroyTachLiteQues; - cpqfcHBAdata->fcChip.InitializeTachyon = CpqTsInitializeTachLite; - cpqfcHBAdata->fcChip.LaserControl = CpqTsLaserControl; - cpqfcHBAdata->fcChip.ProcessIMQEntry = CpqTsProcessIMQEntry; - cpqfcHBAdata->fcChip.InitializeFrameManager = CpqTsInitializeFrameManager; - cpqfcHBAdata->fcChip.ReadWriteWWN = CpqTsReadWriteWWN; - cpqfcHBAdata->fcChip.ReadWriteNVRAM = CpqTsReadWriteNVRAM; - - if (cpqfc_alloc_private_data_pool(cpqfcHBAdata) != 0) { - printk(KERN_WARNING - "cpqfc: unable to allocate pool for passthru ioctls. " - "Passthru ioctls disabled.\n"); - } -} - - -/* (borrowed from linux/drivers/scsi/hosts.c) */ -static void launch_FCworker_thread(struct Scsi_Host *HostAdapter) -{ - DECLARE_MUTEX_LOCKED(sem); - - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - - ENTER("launch_FC_worker_thread"); - - cpqfcHBAdata->notify_wt = &sem; - - /* must unlock before kernel_thread(), for it may cause a reschedule. */ - spin_unlock_irq(HostAdapter->host_lock); - kernel_thread((int (*)(void *))cpqfcTSWorkerThread, - (void *) HostAdapter, 0); - /* - * Now wait for the kernel error thread to initialize itself - - */ - down (&sem); - spin_lock_irq(HostAdapter->host_lock); - cpqfcHBAdata->notify_wt = NULL; - - LEAVE("launch_FC_worker_thread"); - -} - - -/* "Entry" point to discover if any supported PCI - bus adapter can be found -*/ -/* We're supporting: - * Compaq 64-bit, 66MHz HBA with Tachyon TS - * Agilent XL2 - * HP Tachyon - */ -#define HBA_TYPES 3 - -#ifndef PCI_DEVICE_ID_COMPAQ_ -#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc -#endif - -static struct SupportedPCIcards cpqfc_boards[] __initdata = { - {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TACHYON}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHLITE}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHYON}, -}; - - -int cpqfcTS_detect(Scsi_Host_Template *ScsiHostTemplate) -{ - int NumberOfAdapters=0; // how many of our PCI adapters are found? - struct pci_dev *PciDev = NULL; - struct Scsi_Host *HostAdapter = NULL; - CPQFCHBA *cpqfcHBAdata = NULL; - struct timer_list *cpqfcTStimer = NULL; - int i; - - ENTER("cpqfcTS_detect"); - -#if LINUX_VERSION_CODE < LinuxVersionCode(2,3,27) - ScsiHostTemplate->proc_dir = &proc_scsi_cpqfcTS; -#else - ScsiHostTemplate->proc_name = "cpqfcTS"; -#endif - - for( i=0; i < HBA_TYPES; i++) - { - // look for all HBAs of each type - - while((PciDev = pci_find_device(cpqfc_boards[i].vendor_id, - cpqfc_boards[i].device_id, PciDev))) - { - - if (pci_enable_device(PciDev)) { - printk(KERN_ERR - "cpqfc: can't enable PCI device at %s\n", pci_name(PciDev)); - goto err_continue; - } - - if (pci_set_dma_mask(PciDev, CPQFCTS_DMA_MASK) != 0) { - printk(KERN_WARNING - "cpqfc: HBA cannot support required DMA mask, skipping.\n"); - goto err_disable_dev; - } - - // NOTE: (kernel 2.2.12-32) limits allocation to 128k bytes... - /* printk(" scsi_register allocating %d bytes for FC HBA\n", - (ULONG)sizeof(CPQFCHBA)); */ - - HostAdapter = scsi_register( ScsiHostTemplate, sizeof( CPQFCHBA ) ); - - if(HostAdapter == NULL) { - printk(KERN_WARNING - "cpqfc: can't register SCSI HBA, skipping.\n"); - goto err_disable_dev; - } - DEBUG_PCI( printk(" HBA found!\n")); - DEBUG_PCI( printk(" HostAdapter->PciDev->irq = %u\n", PciDev->irq) ); - DEBUG_PCI(printk(" PciDev->baseaddress[0]= %lx\n", - PciDev->resource[0].start)); - DEBUG_PCI(printk(" PciDev->baseaddress[1]= %lx\n", - PciDev->resource[1].start)); - DEBUG_PCI(printk(" PciDev->baseaddress[2]= %lx\n", - PciDev->resource[2].start)); - DEBUG_PCI(printk(" PciDev->baseaddress[3]= %lx\n", - PciDev->resource[3].start)); - - HostAdapter->irq = PciDev->irq; // copy for Scsi layers - - // HP Tachlite uses two (255-byte) ranges of Port I/O (lower & upper), - // for a total I/O port address space of 512 bytes. - // mask out the I/O port address (lower) & record - HostAdapter->io_port = (unsigned int) - PciDev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK; - HostAdapter->n_io_port = 0xff; - - // i.e., expect 128 targets (arbitrary number), while the - // RA-4000 supports 32 LUNs - HostAdapter->max_id = 0; // incremented as devices log in - HostAdapter->max_lun = CPQFCTS_MAX_LUN; // LUNs per FC device - HostAdapter->max_channel = CPQFCTS_MAX_CHANNEL; // multiple busses? - - // get the pointer to our HBA specific data... (one for - // each HBA on the PCI bus(ses)). - cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - - // make certain our data struct is clear - memset( cpqfcHBAdata, 0, sizeof( CPQFCHBA ) ); - - - // initialize our HBA info - cpqfcHBAdata->HBAnum = NumberOfAdapters; - - cpqfcHBAdata->HostAdapter = HostAdapter; // back ptr - Cpqfc_initHBAdata( cpqfcHBAdata, PciDev ); // fill MOST fields - - cpqfcHBAdata->HBAnum = NumberOfAdapters; - spin_lock_init(&cpqfcHBAdata->hba_spinlock); - - // request necessary resources and check for conflicts - if( request_irq( HostAdapter->irq, - cpqfcTS_intr_handler, - SA_INTERRUPT | SA_SHIRQ, - DEV_NAME, - HostAdapter) ) - { - printk(KERN_WARNING "cpqfc: IRQ %u already used\n", HostAdapter->irq); - goto err_unregister; - } - - // Since we have two 256-byte I/O port ranges (upper - // and lower), check them both - if( !request_region( cpqfcHBAdata->fcChip.Registers.IOBaseU, - 0xff, DEV_NAME ) ) - { - printk(KERN_WARNING "cpqfc: address in use: %x\n", - cpqfcHBAdata->fcChip.Registers.IOBaseU); - goto err_free_irq; - } - - if( !request_region( cpqfcHBAdata->fcChip.Registers.IOBaseL, - 0xff, DEV_NAME ) ) - { - printk(KERN_WARNING "cpqfc: address in use: %x\n", - cpqfcHBAdata->fcChip.Registers.IOBaseL); - goto err_release_region_U; - } - - // OK, we have grabbed everything we need now. - DEBUG_PCI(printk(" Reserved 255 I/O addresses @ %x\n", - cpqfcHBAdata->fcChip.Registers.IOBaseL )); - DEBUG_PCI(printk(" Reserved 255 I/O addresses @ %x\n", - cpqfcHBAdata->fcChip.Registers.IOBaseU )); - - - - // start our kernel worker thread - - spin_lock_irq(HostAdapter->host_lock); - launch_FCworker_thread(HostAdapter); - - - // start our TimerTask... - - cpqfcTStimer = &cpqfcHBAdata->cpqfcTStimer; - - init_timer( cpqfcTStimer); // Linux clears next/prev values - cpqfcTStimer->expires = jiffies + HZ; // one second - cpqfcTStimer->data = (unsigned long)cpqfcHBAdata; // this adapter - cpqfcTStimer->function = cpqfcTSheartbeat; // handles timeouts, housekeeping - - add_timer( cpqfcTStimer); // give it to Linux - - - // now initialize our hardware... - if (cpqfcHBAdata->fcChip.InitializeTachyon( cpqfcHBAdata, 1,1)) { - printk(KERN_WARNING "cpqfc: initialization of HBA hardware failed.\n"); - goto err_release_region_L; - } - - cpqfcHBAdata->fcStatsTime = jiffies; // (for FC Statistics delta) - - // give our HBA time to initialize and login current devices... - { - // The Brocade switch (e.g. 2400, 2010, etc.) as of March 2000, - // has the following algorithm for FL_Port startup: - // Time(sec) Action - // 0: Device Plugin and LIP(F7,F7) transmission - // 1.0 LIP incoming - // 1.027 LISA incoming, no CLS! (link not up) - // 1.028 NOS incoming (switch test for N_Port) - // 1.577 ED_TOV expired, transmit LIPs again - // 3.0 LIP(F8,F7) incoming (switch passes Tach Prim.Sig) - // 3.028 LILP received, link up, FLOGI starts - // slowest(worst) case, measured on 1Gb Finisar GT analyzer - - unsigned long stop_time; - - spin_unlock_irq(HostAdapter->host_lock); - stop_time = jiffies + 4*HZ; - while ( time_before(jiffies, stop_time) ) - schedule(); // (our worker task needs to run) - - } - - spin_lock_irq(HostAdapter->host_lock); - NumberOfAdapters++; - spin_unlock_irq(HostAdapter->host_lock); - - continue; - -err_release_region_L: - release_region( cpqfcHBAdata->fcChip.Registers.IOBaseL, 0xff ); -err_release_region_U: - release_region( cpqfcHBAdata->fcChip.Registers.IOBaseU, 0xff ); -err_free_irq: - free_irq( HostAdapter->irq, HostAdapter); -err_unregister: - scsi_unregister( HostAdapter); -err_disable_dev: - pci_disable_device( PciDev ); -err_continue: - continue; - } // end of while() - } - - LEAVE("cpqfcTS_detect"); - - return NumberOfAdapters; -} - -#ifdef SUPPORT_RESET -static void my_ioctl_done (Scsi_Cmnd * SCpnt) -{ - struct request * req; - - req = SCpnt->request; - req->rq_status = RQ_SCSI_DONE; /* Busy, but indicate request done */ - - if (req->CPQFC_WAITING != NULL) - CPQFC_COMPLETE(req->CPQFC_WAITING); -} -#endif - -static int cpqfc_alloc_private_data_pool(CPQFCHBA *hba) -{ - hba->private_data_bits = NULL; - hba->private_data_pool = NULL; - hba->private_data_bits = - kmalloc(((CPQFC_MAX_PASSTHRU_CMDS+BITS_PER_LONG-1) / - BITS_PER_LONG)*sizeof(unsigned long), - GFP_KERNEL); - if (hba->private_data_bits == NULL) - return -1; - memset(hba->private_data_bits, 0, - ((CPQFC_MAX_PASSTHRU_CMDS+BITS_PER_LONG-1) / - BITS_PER_LONG)*sizeof(unsigned long)); - hba->private_data_pool = kmalloc(sizeof(cpqfc_passthru_private_t) * - CPQFC_MAX_PASSTHRU_CMDS, GFP_KERNEL); - if (hba->private_data_pool == NULL) { - kfree(hba->private_data_bits); - hba->private_data_bits = NULL; - return -1; - } - return 0; -} - -static void cpqfc_free_private_data_pool(CPQFCHBA *hba) -{ - kfree(hba->private_data_bits); - kfree(hba->private_data_pool); -} - -int is_private_data_of_cpqfc(CPQFCHBA *hba, void *pointer) -{ - /* Is pointer within our private data pool? - We use Scsi_Request->upper_private_data (normally - reserved for upper layer drivers, e.g. the sg driver) - We check to see if the pointer is ours by looking at - its address. Is this ok? Hmm, it occurs to me that - a user app might do something bad by using sg to send - a cpqfc passthrough ioctl with upper_data_private - forged to be somewhere in our pool..., though they'd - normally have to be root already to do this. */ - - return (pointer != NULL && - pointer >= (void *) hba->private_data_pool && - pointer < (void *) hba->private_data_pool + - sizeof(*hba->private_data_pool) * - CPQFC_MAX_PASSTHRU_CMDS); -} - -cpqfc_passthru_private_t *cpqfc_alloc_private_data(CPQFCHBA *hba) -{ - int i; - - do { - i = find_first_zero_bit(hba->private_data_bits, - CPQFC_MAX_PASSTHRU_CMDS); - if (i == CPQFC_MAX_PASSTHRU_CMDS) - return NULL; - } while ( test_and_set_bit(i & (BITS_PER_LONG - 1), - hba->private_data_bits+(i/BITS_PER_LONG)) != 0); - return &hba->private_data_pool[i]; -} - -void cpqfc_free_private_data(CPQFCHBA *hba, cpqfc_passthru_private_t *data) -{ - int i; - i = data - hba->private_data_pool; - clear_bit(i&(BITS_PER_LONG-1), - hba->private_data_bits+(i/BITS_PER_LONG)); -} - -int cpqfcTS_ioctl( struct scsi_device *ScsiDev, int Cmnd, void *arg) -{ - int result = 0; - struct Scsi_Host *HostAdapter = ScsiDev->host; - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - PFC_LOGGEDIN_PORT pLoggedInPort = NULL; - struct scsi_cmnd *DumCmnd; - int i, j; - VENDOR_IOCTL_REQ ioc; - cpqfc_passthru_t *vendor_cmd; - Scsi_Device *SDpnt; - Scsi_Request *ScsiPassThruReq; - cpqfc_passthru_private_t *privatedata; - - ENTER("cpqfcTS_ioctl "); - - // printk("ioctl CMND %d", Cmnd); - switch (Cmnd) { - // Passthrough provides a mechanism to bypass the RAID - // or other controller and talk directly to the devices - // (e.g. physical disk drive) - // Passthrough commands, unfortunately, tend to be vendor - // specific; this is tailored to COMPAQ's RAID (RA4x00) - case CPQFCTS_SCSI_PASSTHRU: - { - void *buf = NULL; // for kernel space buffer for user data - - /* Check that our pool got allocated ok. */ - if (cpqfcHBAdata->private_data_pool == NULL) - return -ENOMEM; - - if( !arg) - return -EINVAL; - - // must be super user to send stuff directly to the - // controller and/or physical drives... - if( !capable(CAP_SYS_RAWIO) ) - return -EPERM; - - // copy the caller's struct to our space. - if( copy_from_user( &ioc, arg, sizeof( VENDOR_IOCTL_REQ))) - return( -EFAULT); - - vendor_cmd = ioc.argp; // i.e., CPQ specific command struct - - // If necessary, grab a kernel/DMA buffer - if( vendor_cmd->len) - { - buf = kmalloc( vendor_cmd->len, GFP_KERNEL); - if( !buf) - return -ENOMEM; - } - // Now build a Scsi_Request to pass down... - ScsiPassThruReq = scsi_allocate_request(ScsiDev, GFP_KERNEL); - if (ScsiPassThruReq == NULL) { - kfree(buf); - return -ENOMEM; - } - ScsiPassThruReq->upper_private_data = - cpqfc_alloc_private_data(cpqfcHBAdata); - if (ScsiPassThruReq->upper_private_data == NULL) { - kfree(buf); - scsi_release_request(ScsiPassThruReq); // "de-allocate" - return -ENOMEM; - } - - if (vendor_cmd->rw_flag == VENDOR_WRITE_OPCODE) { - if (vendor_cmd->len) { // Need data from user? - if (copy_from_user(buf, vendor_cmd->bufp, - vendor_cmd->len)) { - kfree(buf); - cpqfc_free_private_data(cpqfcHBAdata, - ScsiPassThruReq->upper_private_data); - scsi_release_request(ScsiPassThruReq); - return( -EFAULT); - } - } - ScsiPassThruReq->sr_data_direction = DMA_TO_DEVICE; - } else if (vendor_cmd->rw_flag == VENDOR_READ_OPCODE) { - ScsiPassThruReq->sr_data_direction = DMA_FROM_DEVICE; - } else - // maybe this means a bug in the user app - ScsiPassThruReq->sr_data_direction = DMA_BIDIRECTIONAL; - - ScsiPassThruReq->sr_cmd_len = 0; // set correctly by scsi_do_req() - ScsiPassThruReq->sr_sense_buffer[0] = 0; - ScsiPassThruReq->sr_sense_buffer[2] = 0; - - // We copy the scheme used by sd.c:spinup_disk() to submit commands - // to our own HBA. We do this in order to stall the - // thread calling the IOCTL until it completes, and use - // the same "_quecommand" function for synchronizing - // FC Link events with our "worker thread". - - privatedata = ScsiPassThruReq->upper_private_data; - privatedata->bus = vendor_cmd->bus; - privatedata->pdrive = vendor_cmd->pdrive; - - // eventually gets us to our own _quecommand routine - scsi_wait_req(ScsiPassThruReq, - &vendor_cmd->cdb[0], buf, vendor_cmd->len, - 10*HZ, // timeout - 1); // retries - result = ScsiPassThruReq->sr_result; - - // copy any sense data back to caller - if( result != 0 ) - { - memcpy( vendor_cmd->sense_data, // see struct def - size=40 - ScsiPassThruReq->sr_sense_buffer, - sizeof(ScsiPassThruReq->sr_sense_buffer) < - sizeof(vendor_cmd->sense_data) ? - sizeof(ScsiPassThruReq->sr_sense_buffer) : - sizeof(vendor_cmd->sense_data) - ); - } - SDpnt = ScsiPassThruReq->sr_device; - /* upper_private_data is already freed in call_scsi_done() */ - scsi_release_request(ScsiPassThruReq); // "de-allocate" - ScsiPassThruReq = NULL; - - // need to pass data back to user (space)? - if( (vendor_cmd->rw_flag == VENDOR_READ_OPCODE) && - vendor_cmd->len ) - if( copy_to_user( vendor_cmd->bufp, buf, vendor_cmd->len)) - result = -EFAULT; - - kfree(buf); - - return result; - } - - case CPQFCTS_GETPCIINFO: - { - cpqfc_pci_info_struct pciinfo; - - if( !arg) - return -EINVAL; - - - - pciinfo.bus = cpqfcHBAdata->PciDev->bus->number; - pciinfo.dev_fn = cpqfcHBAdata->PciDev->devfn; - pciinfo.board_id = cpqfcHBAdata->PciDev->device | - (cpqfcHBAdata->PciDev->vendor <<16); - - if(copy_to_user( arg, &pciinfo, sizeof(cpqfc_pci_info_struct))) - return( -EFAULT); - return 0; - } - - case CPQFCTS_GETDRIVVER: - { - DriverVer_type DriverVer = - CPQFCTS_DRIVER_VER( VER_MAJOR,VER_MINOR,VER_SUBMINOR); - - if( !arg) - return -EINVAL; - - if(copy_to_user( arg, &DriverVer, sizeof(DriverVer))) - return( -EFAULT); - return 0; - } - - - - case CPQFC_IOCTL_FC_TARGET_ADDRESS: - // can we find an FC device mapping to this SCSI target? -/* DumCmnd.channel = ScsiDev->channel; */ // For searching -/* DumCmnd.target = ScsiDev->id; */ -/* DumCmnd.lun = ScsiDev->lun; */ - - DumCmnd = scsi_get_command (ScsiDev, GFP_KERNEL); - if (!DumCmnd) - return -ENOMEM; - - pLoggedInPort = fcFindLoggedInPort( fcChip, - DumCmnd, // search Scsi Nexus - 0, // DON'T search linked list for FC port id - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - scsi_put_command (DumCmnd); - if (pLoggedInPort == NULL) { - result = -ENXIO; - break; - } - result = access_ok(VERIFY_WRITE, arg, sizeof(Scsi_FCTargAddress)) ? 0 : -EFAULT; - if (result) break; - - put_user(pLoggedInPort->port_id, - &((Scsi_FCTargAddress *) arg)->host_port_id); - - for( i=3,j=0; i>=0; i--) // copy the LOGIN port's WWN - put_user(pLoggedInPort->u.ucWWN[i], - &((Scsi_FCTargAddress *) arg)->host_wwn[j++]); - for( i=7; i>3; i--) // copy the LOGIN port's WWN - put_user(pLoggedInPort->u.ucWWN[i], - &((Scsi_FCTargAddress *) arg)->host_wwn[j++]); - break; - - - case CPQFC_IOCTL_FC_TDR: - - result = cpqfcTS_TargetDeviceReset( ScsiDev, 0); - - break; - - - - - default: - result = -EINVAL; - break; - } - - LEAVE("cpqfcTS_ioctl"); - return result; -} - - -/* "Release" the Host Bus Adapter... - disable interrupts, stop the HBA, release the interrupt, - and free all resources */ - -int cpqfcTS_release(struct Scsi_Host *HostAdapter) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - - - ENTER("cpqfcTS_release"); - - DEBUG_PCI( printk(" cpqfcTS: delete timer...\n")); - del_timer( &cpqfcHBAdata->cpqfcTStimer); - - // disable the hardware... - DEBUG_PCI( printk(" disable hardware, destroy queues, free mem\n")); - cpqfcHBAdata->fcChip.ResetTachyon( cpqfcHBAdata, CLEAR_FCPORTS); - - // kill kernel thread - if( cpqfcHBAdata->worker_thread ) // (only if exists) - { - DECLARE_MUTEX_LOCKED(sem); // synchronize thread kill - - cpqfcHBAdata->notify_wt = &sem; - DEBUG_PCI( printk(" killing kernel thread\n")); - send_sig( SIGKILL, cpqfcHBAdata->worker_thread, 1); - down( &sem); - cpqfcHBAdata->notify_wt = NULL; - - } - - cpqfc_free_private_data_pool(cpqfcHBAdata); - // free Linux resources - DEBUG_PCI( printk(" cpqfcTS: freeing resources...\n")); - free_irq( HostAdapter->irq, HostAdapter); - scsi_unregister( HostAdapter); - release_region( cpqfcHBAdata->fcChip.Registers.IOBaseL, 0xff); - release_region( cpqfcHBAdata->fcChip.Registers.IOBaseU, 0xff); - /* we get "vfree: bad address" executing this - need to investigate... - if( (void*)((unsigned long)cpqfcHBAdata->fcChip.Registers.MemBase) != - cpqfcHBAdata->fcChip.Registers.ReMapMemBase) - vfree( cpqfcHBAdata->fcChip.Registers.ReMapMemBase); -*/ - pci_disable_device( cpqfcHBAdata->PciDev); - - LEAVE("cpqfcTS_release"); - return 0; -} - - -const char * cpqfcTS_info(struct Scsi_Host *HostAdapter) -{ - static char buf[300]; - CPQFCHBA *cpqfcHBA; - int BusSpeed, BusWidth; - - // get the pointer to our Scsi layer HBA buffer - cpqfcHBA = (CPQFCHBA *)HostAdapter->hostdata; - - BusWidth = (cpqfcHBA->fcChip.Registers.PCIMCTR &0x4) > 0 ? - 64 : 32; - - if( cpqfcHBA->fcChip.Registers.TYconfig.value & 0x80000000) - BusSpeed = 66; - else - BusSpeed = 33; - - sprintf(buf, -"%s: WWN %08X%08X\n on PCI bus %d device 0x%02x irq %d IObaseL 0x%x, MEMBASE 0x%x\nPCI bus width %d bits, bus speed %d MHz\nFCP-SCSI Driver v%d.%d.%d", - cpqfcHBA->fcChip.Name, - cpqfcHBA->fcChip.Registers.wwn_hi, - cpqfcHBA->fcChip.Registers.wwn_lo, - cpqfcHBA->PciDev->bus->number, - cpqfcHBA->PciDev->device, - HostAdapter->irq, - cpqfcHBA->fcChip.Registers.IOBaseL, - cpqfcHBA->fcChip.Registers.MemBase, - BusWidth, - BusSpeed, - VER_MAJOR, VER_MINOR, VER_SUBMINOR -); - - - cpqfcTSDecodeGBICtype( &cpqfcHBA->fcChip, &buf[ strlen(buf)]); - cpqfcTSGetLPSM( &cpqfcHBA->fcChip, &buf[ strlen(buf)]); - return buf; -} - -// -// /proc/scsi support. The following routines allow us to do 'normal' -// sprintf like calls to return the currently requested piece (buflenght -// chars, starting at bufoffset) of the file. Although procfs allows for -// a 1 Kb bytes overflow after te supplied buffer, I consider it bad -// programming to use it to make programming a little simpler. This piece -// of coding is borrowed from ncr53c8xx.c with some modifications -// -struct info_str -{ - char *buffer; // Pointer to output buffer - int buflength; // It's length - int bufoffset; // File offset corresponding with buf[0] - int buffillen; // Current filled length - int filpos; // Current file offset -}; - -static void copy_mem_info(struct info_str *info, char *data, int datalen) -{ - - if (info->filpos < info->bufoffset) { // Current offset before buffer offset - if (info->filpos + datalen <= info->bufoffset) { - info->filpos += datalen; // Discard if completely before buffer - return; - } else { // Partial copy, set to begin - data += (info->bufoffset - info->filpos); - datalen -= (info->bufoffset - info->filpos); - info->filpos = info->bufoffset; - } - } - - info->filpos += datalen; // Update current offset - - if (info->buffillen == info->buflength) // Buffer full, discard - return; - - if (info->buflength - info->buffillen < datalen) // Overflows buffer ? - datalen = info->buflength - info->buffillen; - - memcpy(info->buffer + info->buffillen, data, datalen); - info->buffillen += datalen; -} - -static int copy_info(struct info_str *info, char *fmt, ...) -{ - va_list args; - char buf[400]; - int len; - - va_start(args, fmt); - len = vsprintf(buf, fmt, args); - va_end(args); - - copy_mem_info(info, buf, len); - return len; -} - - -// Routine to get data for /proc RAM filesystem -// -int cpqfcTS_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, - int inout) -{ - struct scsi_cmnd *DumCmnd; - struct scsi_device *ScsiDev; - int Chan, Targ, i; - struct info_str info; - CPQFCHBA *cpqfcHBA; - PTACHYON fcChip; - PFC_LOGGEDIN_PORT pLoggedInPort; - char buf[81]; - - if (inout) return -EINVAL; - - // get the pointer to our Scsi layer HBA buffer - cpqfcHBA = (CPQFCHBA *)host->hostdata; - fcChip = &cpqfcHBA->fcChip; - - *start = buffer; - - info.buffer = buffer; - info.buflength = length; - info.bufoffset = offset; - info.filpos = 0; - info.buffillen = 0; - copy_info(&info, "Driver version = %d.%d.%d", VER_MAJOR, VER_MINOR, VER_SUBMINOR); - cpqfcTSDecodeGBICtype( &cpqfcHBA->fcChip, &buf[0]); - cpqfcTSGetLPSM( &cpqfcHBA->fcChip, &buf[ strlen(buf)]); - copy_info(&info, "%s\n", buf); - -#define DISPLAY_WWN_INFO -#ifdef DISPLAY_WWN_INFO - ScsiDev = scsi_get_host_dev (host); - if (!ScsiDev) - return -ENOMEM; - DumCmnd = scsi_get_command (ScsiDev, GFP_KERNEL); - if (!DumCmnd) { - scsi_free_host_dev (ScsiDev); - return -ENOMEM; - } - copy_info(&info, "WWN database: (\"port_id: 000000\" means disconnected)\n"); - for ( Chan=0; Chan <= host->max_channel; Chan++) { - DumCmnd->device->channel = Chan; - for (Targ=0; Targ <= host->max_id; Targ++) { - DumCmnd->device->id = Targ; - if ((pLoggedInPort = fcFindLoggedInPort( fcChip, - DumCmnd, // search Scsi Nexus - 0, // DON'T search list for FC port id - NULL, // DON'T search list for FC WWN - NULL))){ // DON'T care about end of list - copy_info(&info, "Host: scsi%d Channel: %02d TargetId: %02d -> WWN: ", - host->host_no, Chan, Targ); - for( i=3; i>=0; i--) // copy the LOGIN port's WWN - copy_info(&info, "%02X", pLoggedInPort->u.ucWWN[i]); - for( i=7; i>3; i--) // copy the LOGIN port's WWN - copy_info(&info, "%02X", pLoggedInPort->u.ucWWN[i]); - copy_info(&info, " port_id: %06X\n", pLoggedInPort->port_id); - } - } - } - - scsi_put_command (DumCmnd); - scsi_free_host_dev (ScsiDev); -#endif - - - - - -// Unfortunately, the proc_info buffer isn't big enough -// for everything we would like... -// For FC stats, compile this and turn off WWN stuff above -//#define DISPLAY_FC_STATS -#ifdef DISPLAY_FC_STATS -// get the Fibre Channel statistics - { - int DeltaSecs = (jiffies - cpqfcHBA->fcStatsTime) / HZ; - int days,hours,minutes,secs; - - days = DeltaSecs / (3600*24); // days - hours = (DeltaSecs% (3600*24)) / 3600; // hours - minutes = (DeltaSecs%3600 /60); // minutes - secs = DeltaSecs%60; // secs -copy_info( &info, "Fibre Channel Stats (time dd:hh:mm:ss %02u:%02u:%02u:%02u\n", - days, hours, minutes, secs); - } - - cpqfcHBA->fcStatsTime = jiffies; // (for next delta) - - copy_info( &info, " LinkUp %9u LinkDown %u\n", - fcChip->fcStats.linkUp, fcChip->fcStats.linkDown); - - copy_info( &info, " Loss of Signal %9u Loss of Sync %u\n", - fcChip->fcStats.LossofSignal, fcChip->fcStats.LossofSync); - - copy_info( &info, " Discarded Frames %9u Bad CRC Frame %u\n", - fcChip->fcStats.Dis_Frm, fcChip->fcStats.Bad_CRC); - - copy_info( &info, " TACH LinkFailTX %9u TACH LinkFailRX %u\n", - fcChip->fcStats.linkFailTX, fcChip->fcStats.linkFailRX); - - copy_info( &info, " TACH RxEOFa %9u TACH Elastic Store %u\n", - fcChip->fcStats.Rx_EOFa, fcChip->fcStats.e_stores); - - copy_info( &info, " BufferCreditWait %9uus TACH FM Inits %u\n", - fcChip->fcStats.BB0_Timer*10, fcChip->fcStats.FMinits ); - - copy_info( &info, " FC-2 Timeouts %9u FC-2 Logouts %u\n", - fcChip->fcStats.timeouts, fcChip->fcStats.logouts); - - copy_info( &info, " FC-2 Aborts %9u FC-4 Aborts %u\n", - fcChip->fcStats.FC2aborted, fcChip->fcStats.FC4aborted); - - // clear the counters - cpqfcTSClearLinkStatusCounters( fcChip); -#endif - - return info.buffillen; -} - - -#if DEBUG_CMND - -UCHAR *ScsiToAscii( UCHAR ScsiCommand) -{ - -/*++ - -Routine Description: - - Converts a SCSI command to a text string for debugging purposes. - - -Arguments: - - ScsiCommand -- hex value SCSI Command - - -Return Value: - - An ASCII, null-terminated string if found, else returns NULL. - -Original code from M. McGowen, Compaq ---*/ - - - switch (ScsiCommand) - { - case 0x00: - return( "Test Unit Ready" ); - - case 0x01: - return( "Rezero Unit or Rewind" ); - - case 0x02: - return( "Request Block Address" ); - - case 0x03: - return( "Requese Sense" ); - - case 0x04: - return( "Format Unit" ); - - case 0x05: - return( "Read Block Limits" ); - - case 0x07: - return( "Reassign Blocks" ); - - case 0x08: - return( "Read (6)" ); - - case 0x0a: - return( "Write (6)" ); - - case 0x0b: - return( "Seek (6)" ); - - case 0x12: - return( "Inquiry" ); - - case 0x15: - return( "Mode Select (6)" ); - - case 0x16: - return( "Reserve" ); - - case 0x17: - return( "Release" ); - - case 0x1a: - return( "ModeSen(6)" ); - - case 0x1b: - return( "Start/Stop Unit" ); - - case 0x1c: - return( "Receive Diagnostic Results" ); - - case 0x1d: - return( "Send Diagnostic" ); - - case 0x25: - return( "Read Capacity" ); - - case 0x28: - return( "Read (10)" ); - - case 0x2a: - return( "Write (10)" ); - - case 0x2b: - return( "Seek (10)" ); - - case 0x2e: - return( "Write and Verify" ); - - case 0x2f: - return( "Verify" ); - - case 0x34: - return( "Pre-Fetch" ); - - case 0x35: - return( "Synchronize Cache" ); - - case 0x37: - return( "Read Defect Data (10)" ); - - case 0x3b: - return( "Write Buffer" ); - - case 0x3c: - return( "Read Buffer" ); - - case 0x3e: - return( "Read Long" ); - - case 0x3f: - return( "Write Long" ); - - case 0x41: - return( "Write Same" ); - - case 0x4c: - return( "Log Select" ); - - case 0x4d: - return( "Log Sense" ); - - case 0x56: - return( "Reserve (10)" ); - - case 0x57: - return( "Release (10)" ); - - case 0xa0: - return( "ReportLuns" ); - - case 0xb7: - return( "Read Defect Data (12)" ); - - case 0xca: - return( "Peripheral Device Addressing SCSI Passthrough" ); - - case 0xcb: - return( "Compaq Array Firmware Passthrough" ); - - default: - return( NULL ); - } - -} // end ScsiToAscii() - -void cpqfcTS_print_scsi_cmd(Scsi_Cmnd * cmd) -{ - -printk("cpqfcTS: (%s) chnl 0x%02x, trgt = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n", - ScsiToAscii( cmd->cmnd[0]), cmd->channel, cmd->target, cmd->lun, cmd->cmd_len); - -if( cmd->cmnd[0] == 0) // Test Unit Ready? -{ - int i; - - printk("Cmnd->request_bufflen = 0x%X, ->use_sg = %d, ->bufflen = %d\n", - cmd->request_bufflen, cmd->use_sg, cmd->bufflen); - printk("Cmnd->request_buffer = %p, ->sglist_len = %d, ->buffer = %p\n", - cmd->request_buffer, cmd->sglist_len, cmd->buffer); - for (i = 0; i < cmd->cmd_len; i++) - printk("0x%02x ", cmd->cmnd[i]); - printk("\n"); -} - -} - -#endif /* DEBUG_CMND */ - - - - -static void QueCmndOnBoardLock( CPQFCHBA *cpqfcHBAdata, Scsi_Cmnd *Cmnd) -{ - int i; - - for( i=0; i< CPQFCTS_REQ_QUEUE_LEN; i++) - { // find spare slot - if( cpqfcHBAdata->BoardLockCmnd[i] == NULL ) - { - cpqfcHBAdata->BoardLockCmnd[i] = Cmnd; -// printk(" BoardLockCmnd[%d] %p Queued, chnl/target/lun %d/%d/%d\n", -// i,Cmnd, Cmnd->channel, Cmnd->target, Cmnd->lun); - break; - } - } - if( i >= CPQFCTS_REQ_QUEUE_LEN) - { - printk(" cpqfcTS WARNING: Lost Cmnd %p on BoardLock Q full!", Cmnd); - } - -} - - -static void QueLinkDownCmnd( CPQFCHBA *cpqfcHBAdata, Scsi_Cmnd *Cmnd) -{ - int indx; - - // Remember the command ptr so we can return; we'll complete when - // the device comes back, causing immediate retry - for( indx=0; indx < CPQFCTS_REQ_QUEUE_LEN; indx++)//, SCptr++) - { - if( cpqfcHBAdata->LinkDnCmnd[indx] == NULL ) // available? - { -#ifdef DUMMYCMND_DBG - printk(" @add Cmnd %p to LnkDnCmnd[%d]@ ", Cmnd,indx); -#endif - cpqfcHBAdata->LinkDnCmnd[indx] = Cmnd; - break; - } - } - - if( indx >= CPQFCTS_REQ_QUEUE_LEN ) // no space for Cmnd?? - { - // this will result in an _abort call later (with possible trouble) - printk("no buffer for LinkDnCmnd!! %p\n", Cmnd); - } -} - - - - - -// The file <scsi/scsi_host.h> says not to call scsi_done from -// inside _queuecommand, so we'll do it from the heartbeat timer -// (clarification: Turns out it's ok to call scsi_done from queuecommand -// for cases that don't go to the hardware like scsi cmds destined -// for LUNs we know don't exist, so this code might be simplified...) - -static void QueBadTargetCmnd( CPQFCHBA *cpqfcHBAdata, Scsi_Cmnd *Cmnd) -{ - int i; - // printk(" can't find target %d\n", Cmnd->target); - - for( i=0; i< CPQFCTS_MAX_TARGET_ID; i++) - { // find spare slot - if( cpqfcHBAdata->BadTargetCmnd[i] == NULL ) - { - cpqfcHBAdata->BadTargetCmnd[i] = Cmnd; -// printk(" BadTargetCmnd[%d] %p Queued, chnl/target/lun %d/%d/%d\n", -// i,Cmnd, Cmnd->channel, Cmnd->target, Cmnd->lun); - break; - } - } -} - - -// This is the "main" entry point for Linux Scsi commands -- -// it all starts here. - -int cpqfcTS_queuecommand(Scsi_Cmnd *Cmnd, void (* done)(Scsi_Cmnd *)) -{ - struct Scsi_Host *HostAdapter = Cmnd->device->host; - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - TachFCHDR_GCMND fchs; // only use for FC destination id field - PFC_LOGGEDIN_PORT pLoggedInPort; - ULONG ulStatus, SESTtype; - LONG ExchangeID; - - - - - ENTER("cpqfcTS_queuecommand"); - - PCI_TRACEO( (ULONG)Cmnd, 0x98) - - - Cmnd->scsi_done = done; -#ifdef DEBUG_CMND - cpqfcTS_print_scsi_cmd( Cmnd); -#endif - - // prevent board contention with kernel thread... - - if( cpqfcHBAdata->BoardLock ) - { -// printk(" @BrdLck Hld@ "); - QueCmndOnBoardLock( cpqfcHBAdata, Cmnd); - } - - else - { - - // in the current system (2.2.12), this routine is called - // after spin_lock_irqsave(), so INTs are disabled. However, - // we might have something pending in the LinkQ, which - // might cause the WorkerTask to run. In case that - // happens, make sure we lock it out. - - - - PCI_TRACE( 0x98) - CPQ_SPINLOCK_HBA( cpqfcHBAdata) - PCI_TRACE( 0x98) - - // can we find an FC device mapping to this SCSI target? - pLoggedInPort = fcFindLoggedInPort( fcChip, - Cmnd, // search Scsi Nexus - 0, // DON'T search linked list for FC port id - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - if( pLoggedInPort == NULL ) // not found! - { -// printk(" @Q bad targ cmnd %p@ ", Cmnd); - QueBadTargetCmnd( cpqfcHBAdata, Cmnd); - } - else if (Cmnd->device->lun >= CPQFCTS_MAX_LUN) - { - printk(KERN_WARNING "cpqfc: Invalid LUN: %d\n", Cmnd->device->lun); - QueBadTargetCmnd( cpqfcHBAdata, Cmnd); - } - - else // we know what FC device to send to... - { - - // does this device support FCP target functions? - // (determined by PRLI field) - - if( !(pLoggedInPort->fcp_info & TARGET_FUNCTION) ) - { - printk(" Doesn't support TARGET functions port_id %Xh\n", - pLoggedInPort->port_id ); - QueBadTargetCmnd( cpqfcHBAdata, Cmnd); - } - - // In this case (previous login OK), the device is temporarily - // unavailable waiting for re-login, in which case we expect it - // to be back in between 25 - 500ms. - // If the FC port doesn't log back in within several seconds - // (i.e. implicit "logout"), or we get an explicit logout, - // we set "device_blocked" in Scsi_Device struct; in this - // case 30 seconds will elapse before Linux/Scsi sends another - // command to the device. - else if( pLoggedInPort->prli != TRUE ) - { -// printk("Device (Chnl/Target %d/%d) invalid PRLI, port_id %06lXh\n", -// Cmnd->channel, Cmnd->target, pLoggedInPort->port_id); - QueLinkDownCmnd( cpqfcHBAdata, Cmnd); -// Need to use "blocked" flag?? -// Cmnd->device->device_blocked = TRUE; // just let it timeout - } - else // device supports TARGET functions, and is logged in... - { - // (context of fchs is to "reply" to...) - fchs.s_id = pLoggedInPort->port_id; // destination FC address - - // what is the data direction? For data TO the device, - // we need IWE (Intiator Write Entry). Otherwise, IRE. - - if( Cmnd->cmnd[0] == WRITE_10 || - Cmnd->cmnd[0] == WRITE_6 || - Cmnd->cmnd[0] == WRITE_BUFFER || - Cmnd->cmnd[0] == VENDOR_WRITE_OPCODE || // CPQ specific - Cmnd->cmnd[0] == MODE_SELECT ) - { - SESTtype = SCSI_IWE; // data from HBA to Device - } - else - SESTtype = SCSI_IRE; // data from Device to HBA - - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - SESTtype, // e.g. Initiator Read Entry (IRE) - &fchs, // we are originator; only use d_id - Cmnd, // Linux SCSI command (with scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup? - - { - if( cpqfcHBAdata->BoardLock ) - { - TriggerHBA( fcChip->Registers.ReMapMemBase, 0); - printk(" @bl! %d, xID %Xh@ ", current->pid, ExchangeID); - } - - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - if( !ulStatus ) - { - PCI_TRACEO( ExchangeID, 0xB8) - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - } - else - // check reason for Exchange not being started - we might - // want to Queue and start later, or fail with error - { - printk("quecommand: cpqfcTSStartExchange failed: %Xh\n", ulStatus ); - } - } // end good BuildExchange status - - else // SEST table probably full -- why? hardware hang? - { - printk("quecommand: cpqfcTSBuildExchange faild: %Xh\n", ulStatus); - } - } // end can't do FCP-SCSI target functions - } // end can't find target (FC device) - - CPQ_SPINUNLOCK_HBA( cpqfcHBAdata) - } - - PCI_TRACEO( (ULONG)Cmnd, 0x9C) - LEAVE("cpqfcTS_queuecommand"); - return 0; -} - - -// Entry point for upper Scsi layer intiated abort. Typically -// this is called if the command (for hard disk) fails to complete -// in 30 seconds. This driver intends to complete all disk commands -// within Exchange ".timeOut" seconds (now 7) with target status, or -// in case of ".timeOut" expiration, a DID_SOFT_ERROR which causes -// immediate retry. -// If any disk commands get the _abort call, except for the case that -// the physical device was removed or unavailable due to hardware -// errors, it should be considered a driver error and reported to -// the author. - -int cpqfcTS_abort(Scsi_Cmnd *Cmnd) -{ -// printk(" cpqfcTS_abort called?? \n"); - return 0; -} - -int cpqfcTS_eh_abort(Scsi_Cmnd *Cmnd) -{ - - struct Scsi_Host *HostAdapter = Cmnd->device->host; - // get the pointer to our Scsi layer HBA buffer - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - int i; - ENTER("cpqfcTS_eh_abort"); - - Cmnd->result = DID_ABORT <<16; // assume we'll find it - - printk(" @Linux _abort Scsi_Cmnd %p ", Cmnd); - // See if we can find a Cmnd pointer that matches... - // The most likely case is we accepted the command - // from Linux Scsi (e.g. ceated a SEST entry) and it - // got lost somehow. If we can't find any reference - // to the passed pointer, we can only presume it - // got completed as far as our driver is concerned. - // If we found it, we will try to abort it through - // common mechanism. If FC ABTS is successful (ACC) - // or is rejected (RJT) by target, we will call - // Scsi "done" quickly. Otherwise, the ABTS will timeout - // and we'll call "done" later. - - // Search the SEST exchanges for a matching Cmnd ptr. - for( i=0; i< TACH_SEST_LEN; i++) - { - if( Exchanges->fcExchange[i].Cmnd == Cmnd ) - { - - // found it! - printk(" x_ID %Xh, type %Xh\n", i, Exchanges->fcExchange[i].type); - - Exchanges->fcExchange[i].status = INITIATOR_ABORT; // seconds default - Exchanges->fcExchange[i].timeOut = 10; // seconds default (changed later) - - // Since we need to immediately return the aborted Cmnd to Scsi - // upper layers, we can't make future reference to any of its - // fields (e.g the Nexus). - - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &i); - - break; - } - } - - if( i >= TACH_SEST_LEN ) // didn't find Cmnd ptr in chip's SEST? - { - // now search our non-SEST buffers (i.e. Cmnd waiting to - // start on the HBA or waiting to complete with error for retry). - - // first check BadTargetCmnd - for( i=0; i< CPQFCTS_MAX_TARGET_ID; i++) - { - if( cpqfcHBAdata->BadTargetCmnd[i] == Cmnd ) - { - cpqfcHBAdata->BadTargetCmnd[i] = NULL; - printk("in BadTargetCmnd Q\n"); - goto Done; // exit - } - } - - // if not found above... - - for( i=0; i < CPQFCTS_REQ_QUEUE_LEN; i++) - { - if( cpqfcHBAdata->LinkDnCmnd[i] == Cmnd ) - { - cpqfcHBAdata->LinkDnCmnd[i] = NULL; - printk("in LinkDnCmnd Q\n"); - goto Done; - } - } - - - for( i=0; i< CPQFCTS_REQ_QUEUE_LEN; i++) - { // find spare slot - if( cpqfcHBAdata->BoardLockCmnd[i] == Cmnd ) - { - cpqfcHBAdata->BoardLockCmnd[i] = NULL; - printk("in BoardLockCmnd Q\n"); - goto Done; - } - } - - Cmnd->result = DID_ERROR <<16; // Hmmm... - printk("Not found! "); -// panic("_abort"); - } - -Done: - -// panic("_abort"); - LEAVE("cpqfcTS_eh_abort"); - return 0; // (see scsi.h) -} - - -// FCP-SCSI Target Device Reset -// See dpANS Fibre Channel Protocol for SCSI -// X3.269-199X revision 12, pg 25 - -#ifdef SUPPORT_RESET - -int cpqfcTS_TargetDeviceReset( Scsi_Device *ScsiDev, - unsigned int reset_flags) -{ - int timeout = 10*HZ; - int retries = 1; - char scsi_cdb[12]; - int result; - Scsi_Cmnd * SCpnt; - Scsi_Device * SDpnt; - -// FIXME, cpqfcTS_TargetDeviceReset needs to be fixed -// similarly to how the passthrough ioctl was fixed -// around the 2.5.30 kernel. Scsi_Cmnd replaced with -// Scsi_Request, etc. -// For now, so people don't fall into a hole... - - // printk(" ENTERING cpqfcTS_TargetDeviceReset() - flag=%d \n",reset_flags); - - if (ScsiDev->host->eh_active) return FAILED; - - memset( scsi_cdb, 0, sizeof( scsi_cdb)); - - scsi_cdb[0] = RELEASE; - - SCpnt = scsi_get_command(ScsiDev, GFP_KERNEL); - { - CPQFC_DECLARE_COMPLETION(wait); - - SCpnt->SCp.buffers_residual = FCP_TARGET_RESET; - - // FIXME: this would panic, SCpnt->request would be NULL. - SCpnt->request->CPQFC_WAITING = &wait; - scsi_do_cmd(SCpnt, scsi_cdb, NULL, 0, my_ioctl_done, timeout, retries); - CPQFC_WAIT_FOR_COMPLETION(&wait); - SCpnt->request->CPQFC_WAITING = NULL; - } - - - if(driver_byte(SCpnt->result) != 0) - switch(SCpnt->sense_buffer[2] & 0xf) { - case ILLEGAL_REQUEST: - if(cmd[0] == ALLOW_MEDIUM_REMOVAL) dev->lockable = 0; - else printk("SCSI device (ioctl) reports ILLEGAL REQUEST.\n"); - break; - case NOT_READY: // This happens if there is no disc in drive - if(dev->removable && (cmd[0] != TEST_UNIT_READY)){ - printk(KERN_INFO "Device not ready. Make sure there is a disc in the drive.\n"); - break; - } - case UNIT_ATTENTION: - if (dev->removable){ - dev->changed = 1; - SCpnt->result = 0; // This is no longer considered an error - // gag this error, VFS will log it anyway /axboe - // printk(KERN_INFO "Disc change detected.\n"); - break; - }; - default: // Fall through for non-removable media - printk("SCSI error: host %d id %d lun %d return code = %x\n", - dev->host->host_no, - dev->id, - dev->lun, - SCpnt->result); - printk("\tSense class %x, sense error %x, extended sense %x\n", - sense_class(SCpnt->sense_buffer[0]), - sense_error(SCpnt->sense_buffer[0]), - SCpnt->sense_buffer[2] & 0xf); - - }; - result = SCpnt->result; - - SDpnt = SCpnt->device; - scsi_put_command(SCpnt); - SCpnt = NULL; - - // printk(" LEAVING cpqfcTS_TargetDeviceReset() - return SUCCESS \n"); - return SUCCESS; -} - -#else -int cpqfcTS_TargetDeviceReset( Scsi_Device *ScsiDev, - unsigned int reset_flags) -{ - return -ENOTSUPP; -} - -#endif /* SUPPORT_RESET */ - -int cpqfcTS_eh_device_reset(Scsi_Cmnd *Cmnd) -{ - int retval; - Scsi_Device *SDpnt = Cmnd->device; - // printk(" ENTERING cpqfcTS_eh_device_reset() \n"); - spin_unlock_irq(Cmnd->device->host->host_lock); - retval = cpqfcTS_TargetDeviceReset( SDpnt, 0); - spin_lock_irq(Cmnd->device->host->host_lock); - return retval; -} - - -int cpqfcTS_reset(Scsi_Cmnd *Cmnd, unsigned int reset_flags) -{ - - ENTER("cpqfcTS_reset"); - - LEAVE("cpqfcTS_reset"); - return SCSI_RESET_ERROR; /* Bus Reset Not supported */ -} - -/* This function determines the bios parameters for a given - harddisk. These tend to be numbers that are made up by the - host adapter. Parameters: - size, device number, list (heads, sectors,cylinders). - (from hosts.h) -*/ - -int cpqfcTS_biosparam(struct scsi_device *sdev, struct block_device *n, - sector_t capacity, int ip[]) -{ - int size = capacity; - - ENTER("cpqfcTS_biosparam"); - ip[0] = 64; - ip[1] = 32; - ip[2] = size >> 11; - - if( ip[2] > 1024 ) - { - ip[0] = 255; - ip[1] = 63; - ip[2] = size / (ip[0] * ip[1]); - } - - LEAVE("cpqfcTS_biosparam"); - return 0; -} - - - -irqreturn_t cpqfcTS_intr_handler( int irq, - void *dev_id, - struct pt_regs *regs) -{ - - unsigned long flags, InfLoopBrk=0; - struct Scsi_Host *HostAdapter = dev_id; - CPQFCHBA *cpqfcHBA = (CPQFCHBA *)HostAdapter->hostdata; - int MoreMessages = 1; // assume we have something to do - UCHAR IntPending; - int handled = 0; - - ENTER("intr_handler"); - spin_lock_irqsave( HostAdapter->host_lock, flags); - // is this our INT? - IntPending = readb( cpqfcHBA->fcChip.Registers.INTPEND.address); - - // broken boards can generate messages forever, so - // prevent the infinite loop -#define INFINITE_IMQ_BREAK 10000 - if( IntPending ) - { - handled = 1; - // mask our HBA interrupts until we handle it... - writeb( 0, cpqfcHBA->fcChip.Registers.INTEN.address); - - if( IntPending & 0x4) // "INT" - Tach wrote to IMQ - { - while( (++InfLoopBrk < INFINITE_IMQ_BREAK) && (MoreMessages ==1) ) - { - MoreMessages = CpqTsProcessIMQEntry( HostAdapter); // ret 0 when done - } - if( InfLoopBrk >= INFINITE_IMQ_BREAK ) - { - printk("WARNING: Compaq FC adapter generating excessive INTs -REPLACE\n"); - printk("or investigate alternate causes (e.g. physical FC layer)\n"); - } - - else // working normally - re-enable INTs and continue - writeb( 0x1F, cpqfcHBA->fcChip.Registers.INTEN.address); - - } // (...ProcessIMQEntry() clears INT by writing IMQ consumer) - else // indications of errors or problems... - // these usually indicate critical system hardware problems. - { - if( IntPending & 0x10 ) - printk(" cpqfcTS adapter external memory parity error detected\n"); - if( IntPending & 0x8 ) - printk(" cpqfcTS adapter PCI master address crossed 45-bit boundary\n"); - if( IntPending & 0x2 ) - printk(" cpqfcTS adapter DMA error detected\n"); - if( IntPending & 0x1 ) { - UCHAR IntStat; - printk(" cpqfcTS adapter PCI error detected\n"); - IntStat = readb( cpqfcHBA->fcChip.Registers.INTSTAT.address); - printk("cpqfc: ISR = 0x%02x\n", IntStat); - if (IntStat & 0x1) { - __u16 pcistat; - /* read the pci status register */ - pci_read_config_word(cpqfcHBA->PciDev, 0x06, &pcistat); - printk("PCI status register is 0x%04x\n", pcistat); - if (pcistat & 0x8000) printk("Parity Error Detected.\n"); - if (pcistat & 0x4000) printk("Signalled System Error\n"); - if (pcistat & 0x2000) printk("Received Master Abort\n"); - if (pcistat & 0x1000) printk("Received Target Abort\n"); - if (pcistat & 0x0800) printk("Signalled Target Abort\n"); - } - if (IntStat & 0x4) printk("(INT)\n"); - if (IntStat & 0x8) - printk("CRS: PCI master address crossed 46 bit bouandary\n"); - if (IntStat & 0x10) printk("MRE: external memory parity error.\n"); - } - } - } - spin_unlock_irqrestore( HostAdapter->host_lock, flags); - LEAVE("intr_handler"); - return IRQ_RETVAL(handled); -} - - - - -int cpqfcTSDecodeGBICtype( PTACHYON fcChip, char cErrorString[]) -{ - // Verify GBIC type (if any) and correct Tachyon Port State Machine - // (GBIC) module definition is: - // GPIO1, GPIO0, GPIO4 for MD2, MD1, MD0. The input states appear - // to be inverted -- i.e., a setting of 111 is read when there is NO - // GBIC present. The Module Def (MD) spec says 000 is "no GBIC" - // Hard code the bit states to detect Copper, - // Long wave (single mode), Short wave (multi-mode), and absent GBIC - - ULONG ulBuff; - - sprintf( cErrorString, "\nGBIC detected: "); - - ulBuff = fcChip->Registers.TYstatus.value & 0x13; - switch( ulBuff ) - { - case 0x13: // GPIO4, GPIO1, GPIO0 = 111; no GBIC! - sprintf( &cErrorString[ strlen( cErrorString)], - "NONE! "); - return FALSE; - - - case 0x11: // Copper GBIC detected - sprintf( &cErrorString[ strlen( cErrorString)], - "Copper. "); - break; - - case 0x10: // Long-wave (single mode) GBIC detected - sprintf( &cErrorString[ strlen( cErrorString)], - "Long-wave. "); - break; - case 0x1: // Short-wave (multi mode) GBIC detected - sprintf( &cErrorString[ strlen( cErrorString)], - "Short-wave. "); - break; - default: // unknown GBIC - presumably it will work (?) - sprintf( &cErrorString[ strlen( cErrorString)], - "Unknown. "); - - break; - } // end switch GBIC detection - - return TRUE; -} - - - - - - -int cpqfcTSGetLPSM( PTACHYON fcChip, char cErrorString[]) -{ - // Tachyon's Frame Manager LPSM in LinkDown state? - // (For non-loop port, check PSM instead.) - // return string with state and FALSE is Link Down - - int LinkUp; - - if( fcChip->Registers.FMstatus.value & 0x80 ) - LinkUp = FALSE; - else - LinkUp = TRUE; - - sprintf( &cErrorString[ strlen( cErrorString)], - " LPSM %Xh ", - (fcChip->Registers.FMstatus.value >>4) & 0xf ); - - - switch( fcChip->Registers.FMstatus.value & 0xF0) - { - // bits set in LPSM - case 0x10: - sprintf( &cErrorString[ strlen( cErrorString)], "ARB"); - break; - case 0x20: - sprintf( &cErrorString[ strlen( cErrorString)], "ARBwon"); - break; - case 0x30: - sprintf( &cErrorString[ strlen( cErrorString)], "OPEN"); - break; - case 0x40: - sprintf( &cErrorString[ strlen( cErrorString)], "OPENed"); - break; - case 0x50: - sprintf( &cErrorString[ strlen( cErrorString)], "XmitCLS"); - break; - case 0x60: - sprintf( &cErrorString[ strlen( cErrorString)], "RxCLS"); - break; - case 0x70: - sprintf( &cErrorString[ strlen( cErrorString)], "Xfer"); - break; - case 0x80: - sprintf( &cErrorString[ strlen( cErrorString)], "Init"); - break; - case 0x90: - sprintf( &cErrorString[ strlen( cErrorString)], "O-IInitFin"); - break; - case 0xa0: - sprintf( &cErrorString[ strlen( cErrorString)], "O-IProtocol"); - break; - case 0xb0: - sprintf( &cErrorString[ strlen( cErrorString)], "O-ILipRcvd"); - break; - case 0xc0: - sprintf( &cErrorString[ strlen( cErrorString)], "HostControl"); - break; - case 0xd0: - sprintf( &cErrorString[ strlen( cErrorString)], "LoopFail"); - break; - case 0xe0: - sprintf( &cErrorString[ strlen( cErrorString)], "Offline"); - break; - case 0xf0: - sprintf( &cErrorString[ strlen( cErrorString)], "OldPort"); - break; - case 0: - default: - sprintf( &cErrorString[ strlen( cErrorString)], "Monitor"); - break; - - } - - return LinkUp; -} - - - - -#include "linux/slab.h" - -// Dynamic memory allocation alignment routines -// HP's Tachyon Fibre Channel Controller chips require -// certain memory queues and register pointers to be aligned -// on various boundaries, usually the size of the Queue in question. -// Alignment might be on 2, 4, 8, ... or even 512 byte boundaries. -// Since most O/Ss don't allow this (usually only Cache aligned - -// 32-byte boundary), these routines provide generic alignment (after -// O/S allocation) at any boundary, and store the original allocated -// pointer for deletion (O/S free function). Typically, we expect -// these functions to only be called at HBA initialization and -// removal time (load and unload times) -// ALGORITHM notes: -// Memory allocation varies by compiler and platform. In the worst case, -// we are only assured BYTE alignment, but in the best case, we can -// request allocation on any desired boundary. Our strategy: pad the -// allocation request size (i.e. waste memory) so that we are assured -// of passing desired boundary near beginning of contiguous space, then -// mask out lower address bits. -// We define the following algorithm: -// allocBoundary - compiler/platform specific address alignment -// in number of bytes (default is single byte; i.e. 1) -// n_alloc - number of bytes application wants @ aligned address -// ab - alignment boundary, in bytes (e.g. 4, 32, ...) -// t_alloc - total allocation needed to ensure desired boundary -// mask - to clear least significant address bits for boundary -// Compute: -// t_alloc = n_alloc + (ab - allocBoundary) -// allocate t_alloc bytes @ alloc_address -// mask = NOT (ab - 1) -// (e.g. if ab=32 _0001 1111 -> _1110 0000 -// aligned_address = alloc_address & mask -// set n_alloc bytes to 0 -// return aligned_address (NULL if failed) -// -// If u32_AlignedAddress is non-zero, then search for BaseAddress (stored -// from previous allocation). If found, invoke call to FREE the memory. -// Return NULL if BaseAddress not found - -// we need about 8 allocations per HBA. Figuring at most 10 HBAs per server -// size the dynamic_mem array at 80. - -void* fcMemManager( struct pci_dev *pdev, ALIGNED_MEM *dynamic_mem, - ULONG n_alloc, ULONG ab, ULONG u32_AlignedAddress, - dma_addr_t *dma_handle) -{ - USHORT allocBoundary=1; // compiler specific - worst case 1 - // best case - replace malloc() call - // with function that allocates exactly - // at desired boundary - - unsigned long ulAddress; - ULONG t_alloc, i; - void *alloc_address = 0; // def. error code / address not found - LONG mask; // must be 32-bits wide! - - ENTER("fcMemManager"); - if( u32_AlignedAddress ) // are we freeing existing memory? - { -// printk(" freeing AlignedAddress %Xh\n", u32_AlignedAddress); - for( i=0; i<DYNAMIC_ALLOCATIONS; i++) // look for the base address - { -// printk("dynamic_mem[%u].AlignedAddress %lX\n", i, dynamic_mem[i].AlignedAddress); - if( dynamic_mem[i].AlignedAddress == u32_AlignedAddress ) - { - alloc_address = dynamic_mem[i].BaseAllocated; // 'success' status - pci_free_consistent(pdev,dynamic_mem[i].size, - alloc_address, - dynamic_mem[i].dma_handle); - dynamic_mem[i].BaseAllocated = 0; // clear for next use - dynamic_mem[i].AlignedAddress = 0; - dynamic_mem[i].size = 0; - break; // quit for loop; done - } - } - } - else if( n_alloc ) // want new memory? - { - dma_addr_t handle; - t_alloc = n_alloc + (ab - allocBoundary); // pad bytes for alignment -// printk("pci_alloc_consistent() for Tach alignment: %ld bytes\n", t_alloc); - -// (would like to) allow thread block to free pages - alloc_address = // total bytes (NumberOfBytes) - pci_alloc_consistent(pdev, t_alloc, &handle); - - // now mask off least sig. bits of address - if( alloc_address ) // (only if non-NULL) - { - // find place to store ptr, so we - // can free it later... - - mask = (LONG)(ab - 1); // mask all low-order bits - mask = ~mask; // invert bits - for( i=0; i<DYNAMIC_ALLOCATIONS; i++) // look for free slot - { - if( dynamic_mem[i].BaseAllocated == 0) // take 1st available - { - dynamic_mem[i].BaseAllocated = alloc_address;// address from O/S - dynamic_mem[i].dma_handle = handle; - if (dma_handle != NULL) - { -// printk("handle = %p, ab=%d, boundary = %d, mask=0x%08x\n", -// handle, ab, allocBoundary, mask); - *dma_handle = (dma_addr_t) - ((((ULONG)handle) + (ab - allocBoundary)) & mask); - } - dynamic_mem[i].size = t_alloc; - break; - } - } - ulAddress = (unsigned long)alloc_address; - - ulAddress += (ab - allocBoundary); // add the alignment bytes- - // then truncate address... - alloc_address = (void*)(ulAddress & mask); - - dynamic_mem[i].AlignedAddress = - (ULONG)(ulAddress & mask); // 32bit Tach address - memset( alloc_address, 0, n_alloc ); // clear new memory - } - else // O/S dynamic mem alloc failed! - alloc_address = 0; // (for debugging breakpt) - - } - - LEAVE("fcMemManager"); - return alloc_address; // good (or NULL) address -} - - -static Scsi_Host_Template driver_template = { - .detect = cpqfcTS_detect, - .release = cpqfcTS_release, - .info = cpqfcTS_info, - .proc_info = cpqfcTS_proc_info, - .ioctl = cpqfcTS_ioctl, - .queuecommand = cpqfcTS_queuecommand, - .eh_device_reset_handler = cpqfcTS_eh_device_reset, - .eh_abort_handler = cpqfcTS_eh_abort, - .bios_param = cpqfcTS_biosparam, - .can_queue = CPQFCTS_REQ_QUEUE_LEN, - .this_id = -1, - .sg_tablesize = SG_ALL, - .cmd_per_lun = CPQFCTS_CMD_PER_LUN, - .use_clustering = ENABLE_CLUSTERING, -}; -#include "scsi_module.c" - diff --git a/drivers/scsi/cpqfcTSioctl.h b/drivers/scsi/cpqfcTSioctl.h deleted file mode 100644 index 82553696912..00000000000 --- a/drivers/scsi/cpqfcTSioctl.h +++ /dev/null @@ -1,94 +0,0 @@ -// for user apps, make sure data size types are defined -// with - - -#define CCPQFCTS_IOC_MAGIC 'Z' - -typedef struct -{ - __u8 bus; - __u8 dev_fn; - __u32 board_id; -} cpqfc_pci_info_struct; - -typedef __u32 DriverVer_type; -/* -typedef union -{ - struct // Peripheral Unit Device - { - __u8 Bus:6; - __u8 Mode:2; // b00 - __u8 Dev; - } PeripDev; - struct // Volume Set Address - { - __u8 DevMSB:6; - __u8 Mode:2; // b01 - __u8 DevLSB; - } LogDev; - struct // Logical Unit Device (SCSI-3, SCC-2 defined) - { - __u8 Targ:6; - __u8 Mode:2; // b10 - __u8 Dev:5; - __u8 Bus:3; - - } LogUnit; -} SCSI3Addr_struct; - - -typedef struct -{ - SCSI3Addr_struct FCP_Nexus; - __u8 cdb[16]; -} PassThru_Command_struct; -*/ - -/* this is nearly duplicated in idashare.h */ -typedef struct { - int lc; /* Controller number */ - int node; /* Node (box) number */ - int ld; /* Logical Drive on this box, if required */ - __u32 nexus; /* SCSI Nexus */ - void *argp; /* Argument pointer */ -} VENDOR_IOCTL_REQ; - - -typedef struct { - char cdb[16]; /* SCSI CDB for the pass-through */ - ushort bus; /* Target bus on the box */ - ushort pdrive; /* Physical drive on the box */ - int len; /* Length of the data area of the CDB */ - int sense_len; /* Length of the sense data */ - char sense_data[40]; /* Sense data */ - void *bufp; /* Data area for the CDB */ - char rw_flag; /* Read CDB or Write CDB */ -} cpqfc_passthru_t; - -/* -** Defines for the IOCTLS. -*/ - -#define VENDOR_READ_OPCODE 0x26 -#define VENDOR_WRITE_OPCODE 0x27 - -#define CPQFCTS_GETPCIINFO _IOR( CCPQFCTS_IOC_MAGIC, 1, cpqfc_pci_info_struct) -#define CPQFCTS_GETDRIVVER _IOR( CCPQFCTS_IOC_MAGIC, 9, DriverVer_type) - -#define CPQFCTS_SCSI_PASSTHRU _IOWR( CCPQFCTS_IOC_MAGIC,11, VENDOR_IOCTL_REQ) - -/* We would rather have equivalent generic, low-level driver agnostic -ioctls that do what CPQFC_IOCTL_FC_TARGET_ADDRESS and -CPQFC_IOCTL_FC_TDR 0x5388 do, but currently, we do not have them, -consequently applications would have to know they are talking to cpqfc. */ - -/* Used to get Fibre Channel WWN and port_id from device */ -// #define CPQFC_IOCTL_FC_TARGET_ADDRESS 0x5387 -#define CPQFC_IOCTL_FC_TARGET_ADDRESS \ - _IOR( CCPQFCTS_IOC_MAGIC, 13, Scsi_FCTargAddress) - -/* Used to invoke Target Defice Reset for Fibre Channel */ -// #define CPQFC_IOCTL_FC_TDR 0x5388 -#define CPQFC_IOCTL_FC_TDR _IO( CCPQFCTS_IOC_MAGIC, 15) - diff --git a/drivers/scsi/cpqfcTSstructs.h b/drivers/scsi/cpqfcTSstructs.h deleted file mode 100644 index 0bae3298c44..00000000000 --- a/drivers/scsi/cpqfcTSstructs.h +++ /dev/null @@ -1,1530 +0,0 @@ -/* Copyright(c) 2000, Compaq Computer Corporation - * Fibre Channel Host Bus Adapter 64-bit, 66MHz PCI - * Originally developed and tested on: - * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... - * SP# P225CXCBFIEL6T, Rev XC - * SP# 161290-001, Rev XD - * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Written by Don Zimmerman -*/ -#ifndef CPQFCTSSTRUCTS_H -#define CPQFCTSSTRUCTS_H - -#include <linux/timer.h> // timer declaration in our host data -#include <linux/interrupt.h> -#include <asm/atomic.h> -#include "cpqfcTSioctl.h" - -#define DbgDelay(secs) { int wait_time; printk( " DbgDelay %ds ", secs); \ - for( wait_time=jiffies + (secs*HZ); \ - time_before(jiffies, wait_time) ;) ; } - -#define CPQFCTS_DRIVER_VER(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -// don't forget to also change MODULE_DESCRIPTION in cpqfcTSinit.c -#define VER_MAJOR 2 -#define VER_MINOR 5 -#define VER_SUBMINOR 4 - -// Macros for kernel (esp. SMP) tracing using a PCI analyzer -// (e.g. x86). -//#define PCI_KERNEL_TRACE -#ifdef PCI_KERNEL_TRACE -#define PCI_TRACE(x) inl( fcChip->Registers.IOBaseL +x); -#define PCI_TRACEO(x,y) outl( x, (fcChip->Registers.IOBaseL +y)); -#else - -#define PCI_TRACE(x) -#define PCI_TRACEO(x,y) -#endif - - -//#define DEBUG_CMND 1 // debug output for Linux Scsi CDBs -//#define DUMMYCMND_DBG 1 - -//#define DEBUG_CPQFCTS 1 -//#undef DEBUG_CPQFCTS -#ifdef DEBUG_CPQFCTS -#define ENTER(x) printk("cpqfcts : entering %s()\n", x); -#define LEAVE(x) printk("cpqfcts : leaving %s()\n", x); -#define DEBUG(x) x -#else -#define ENTER(x) -#define LEAVE(x) -#define DEBUG(x) -#endif /* DEBUG_CPQFCTS */ - -//#define DEBUG_CPQFCTS_PCI 1 -//#undef DEBUG_CPQFCTS_PCI -#if DEBUG_CPQFCTS_PCI -#define DEBUG_PCI(x) x -#else -#define DEBUG_PCI(x) -#endif /* DEBUG_CPQFCTS_PCI */ - -#define STACHLITE66_TS12 "Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.2" -#define STACHLITE66_TS13 "Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.3" -#define STACHLITE_UNKNOWN "Compaq FibreChannel HBA Tachyon Chip/Board Ver??" -#define SAGILENT_XL2_21 "Agilent FC HBA, Tachyon XL2 HPFC-5200B/2.1" - -// PDA is Peripheral Device Address, VSA is Volume Set Addressing -// Linux SCSI parameters -#define CPQFCTS_MAX_TARGET_ID 64 - -// Note, changing CPQFCTS_MAX_LUN to less than 32 (e.g, 8) will result in -// strange behavior if a box with more than, e.g. 8, is on the loop. -#define CPQFCTS_MAX_LUN 32 // The RA-4x00 supports 32 (Linux SCSI supports 8) -#define CPQFCTS_MAX_CHANNEL 0 // One FC port on cpqfcTS HBA - -#define CPQFCTS_CMD_PER_LUN 15 // power of 2 -1, must be >0 -#define CPQFCTS_REQ_QUEUE_LEN (TACH_SEST_LEN/2) // must be < TACH_SEST_LEN - -#define LinuxVersionCode(v, p, s) (((v)<<16)+((p)<<8)+(s)) -#ifndef DECLARE_MUTEX_LOCKED -#define DECLARE_MUTEX_LOCKED(sem) struct semaphore sem = MUTEX_LOCKED -#endif - -#define DEV_NAME "cpqfcTS" - -struct SupportedPCIcards -{ - __u16 vendor_id; - __u16 device_id; -}; - -// nn:nn denotes bit field - // TachyonHeader struct def. - // the fields shared with ODB - // need to have same value - - - - -#ifndef BYTE -//typedef UCHAR BYTE; -typedef __u8 BYTE; -#endif -#ifndef UCHAR -typedef __u8 UCHAR; -#endif -#ifndef LONG -typedef __s32 LONG; -#endif -#ifndef ULONG -typedef __u32 ULONG; -#endif -#ifndef PVOID -typedef void * PVOID; -#endif -#ifndef USHORT -typedef __u16 USHORT; -#endif -#ifndef BOOLEAN -typedef __u8 BOOLEAN; -#endif - - -// macro for FC-PH reject codes -// payload format for LS_RJT (FC payloads are big endian): -// byte 0 1 2 3 (MSB) -// DWORD 0 01 00 00 00 -// DWORD 1 resvd code expl. vendor - -#define LS_RJT_REASON( code, expl) (( code<<8) | (expl <<16)) - - -#define TachLiteSTATUS 0x12 - -// Fibre Channel EXCHANGE status codes for Tachyon chips/ driver software -// 32-bit ERROR word defines -#define INVALID_ARGS 0x1 -#define LNKDWN_OSLS 0x2 -#define LNKDWN_LASER 0x4 -#define OUTQUE_FULL 0x8 -#define DRIVERQ_FULL 0x10 -#define SEST_FULL 0x20 -#define BAD_ALPA 0x40 -#define OVERFLOW 0x80 // inbound CM -#define COUNT_ERROR 0x100 // inbound CM -#define LINKFAIL_RX 0x200 // inbound CM -#define ABORTSEQ_NOTIFY 0x400 // outbound CM -#define LINKFAIL_TX 0x800 // outbound CM -#define HOSTPROG_ERR 0x1000 // outbound CM -#define FRAME_TO 0x2000 // outbound CM -#define INV_ENTRY 0x4000 // outbound CM -#define SESTPROG_ERR 0x8000 // outbound CM -#define OUTBOUND_TIMEOUT 0x10000L // timeout waiting for Tachyon outbound CM -#define INITIATOR_ABORT 0x20000L // initiator exchange timeout or O/S ABORT -#define MEMPOOL_FAIL 0x40000L // O/S memory pool allocation failed -#define FC2_TIMEOUT 0x80000L // driver timeout for lost frames -#define TARGET_ABORT 0x100000L // ABTS received from FC port -#define EXCHANGE_QUEUED 0x200000L // e.g. Link State was LDn on fcStart -#define PORTID_CHANGED 0x400000L // fc Port address changed -#define DEVICE_REMOVED 0x800000L // fc Port address changed -// Several error scenarios result in SEST Exchange frames -// unexpectedly arriving in the SFQ -#define SFQ_FRAME 0x1000000L // SFQ frames from open Exchange - -// Maximum number of Host Bus Adapters (HBA) / controllers supported -// only important for mem allocation dimensions - increase as necessary - -#define MAX_ADAPTERS 8 -#define MAX_RX_PAYLOAD 1024 // hardware dependent max frame payload -// Tach header struc defines -#define SOFi3 0x7 -#define SOFf 0x8 -#define SOFn3 0xB -#define EOFn 0x5 -#define EOFt 0x6 - -// FCP R_CTL defines -#define FCP_CMND 0x6 -#define FCP_XFER_RDY 0x5 -#define FCP_RSP 0x7 -#define FCP_RESPONSE 0x777 // (arbitrary #) -#define NEED_FCP_RSP 0x77 // (arbitrary #) -#define FCP_DATA 0x1 - -#define RESET_TACH 0x100 // Reset Tachyon/TachLite -#define SCSI_IWE 0x2000 // initiator write entry (for SEST) -#define SCSI_IRE 0x3000 // initiator read entry (for SEST) -#define SCSI_TRE 0x400 // target read entry (for SEST) -#define SCSI_TWE 0x500 // target write entry (for SEST) -#define TOGGLE_LASER 0x800 -#define LIP 0x900 -#define CLEAR_FCPORTS 99 // (arbitrary #) free mem for Logged in ports -#define FMINIT 0x707 // (arbitrary) for Frame Manager Init command - -// BLS == Basic Link Service -// ELS == Extended Link Service -#define BLS_NOP 4 -#define BLS_ABTS 0x10 // FC-PH Basic Link Service Abort Sequence -#define BLS_ABTS_ACC 0x100 // FC-PH Basic Link Service Abort Sequence Accept -#define BLS_ABTS_RJT 0x101 // FC-PH Basic Link Service Abort Sequence Reject -#define ELS_PLOGI 0x03 // FC-PH Port Login (arbitrary assign) -#define ELS_SCR 0x70 // (arb assign) State Change Registration (Fabric) -#define FCS_NSR 0x72 // (arb assign) Name Service Request (Fabric) -#define ELS_FLOGI 0x44 // (arb assign) Fabric Login -#define ELS_FDISC 0x41 // (arb assign) Fabric Discovery (Login) -#define ELS_PDISC 0x50 // FC-PH2 Port Discovery -#define ELS_ABTX 0x06 // FC-PH Abort Exchange -#define ELS_LOGO 0x05 // FC-PH Port Logout -#define ELS_PRLI 0x20 // FCP-SCSI Process Login -#define ELS_PRLO 0x21 // FCP-SCSI Process Logout -#define ELS_LOGO_ACC 0x07 // {FC-PH} Port Logout Accept -#define ELS_PLOGI_ACC 0x08 // {FC-PH} Port Login Accept -#define ELS_ACC 0x18 // {FC-PH} (generic) ACCept -#define ELS_PRLI_ACC 0x22 // {FCP-SCSI} Process Login Accept -#define ELS_RJT 0x1000000 -#define SCSI_REPORT_LUNS 0x0A0 -#define FCP_TARGET_RESET 0x200 - -#define ELS_LILP_FRAME 0x00000711 // 1st payload word of LILP frame - -#define SFQ_UNASSISTED_FCP 1 // ICM, DWord3, "Type" unassisted FCP -#define SFQ_UNKNOWN 0x31 // (arbitrary) ICM, DWord3, "Type" unknown - -// these "LINK" bits refer to loop or non-loop -#define LINKACTIVE 0x2 // fcLinkQ type - LINK UP Tachyon FM 'Lup' bit set -#define LINKDOWN 0xf2 // fcLinkQ type - LINK DOWN Tachyon FM 'Ldn' bit set - -//#define VOLUME_SET_ADDRESSING 1 // "channel" or "bus" 1 - -typedef struct // 32 bytes hdr ONLY (e.g. FCP_DATA buffer for SEST) -{ - ULONG reserved; // dword 0 (don't use) - ULONG sof_eof; - ULONG d_id; // dword 2 - 31:24 R_CTL, 23:0 D_ID - ULONG s_id; // dword 3 - 31:24 CS_CTL, 23:0 S_ID - ULONG f_ctl; // dword 4 - 31:24 Type, 23:0 F_CTL - ULONG seq_cnt; // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT - ULONG ox_rx_id; // dword 6 - 31:16 OX_ID, 15:0 RX_ID - ULONG ro; // dword 7 - relative offset -} TachFCHDR; - - // NOTE!! the following struct MUST be 64 bytes. -typedef struct // 32 bytes hdr + 32 bytes payload -{ - ULONG reserved; // dword 0 (don't use - must clear to 0) - ULONG sof_eof; // dword 1 - 31:24 SOF:EOF, UAM,CLS, LCr, TFV, TimeStamp - ULONG d_id; // dword 2 - 31:24 R_CTL, 23:0 D_ID - ULONG s_id; // dword 3 - 31:24 CS_CTL, 23:0 S_ID - ULONG f_ctl; // dword 4 - 31:24 Type, 23:0 F_CTL - ULONG seq_cnt; // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT - ULONG ox_rx_id; // dword 6 - 31:16 OX_ID, 15:0 RX_ID - ULONG ro; // dword 7 - relative offset -//--------- - __u32 pl[8]; // dwords 8-15 frame data payload -} TachFCHDR_CMND; - - -typedef struct // 32 bytes hdr + 120 bytes payload -{ - ULONG reserved; // dword 0 (don't use - must clear to 0) - ULONG sof_eof; // dword 1 - 31:24 SOF:EOF, UAM,CLS, LCr, TFV, TimeStamp - ULONG d_id; // dword 2 - 31:24 R_CTL, 23:0 D_ID - ULONG s_id; // dword 3 - 31:24 CS_CTL, 23:0 S_ID - ULONG f_ctl; // dword 4 - 31:24 Type, 23:0 F_CTL - ULONG seq_cnt; // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT - ULONG ox_rx_id; // dword 6 - 31:16 OX_ID, 15:0 RX_ID - ULONG ro; // dword 7 - relative offset -//--------- - __u32 pl[30]; // largest necessary payload (for LOGIN cmnds) -} TachFCHDR_GCMND; - -typedef struct // 32 bytes hdr + 64 bytes payload -{ - ULONG reserved; // dword 0 (don't use) - ULONG sof_eof; - ULONG d_id; // dword 2 - 31:24 R_CTL, 23:0 D_ID - ULONG s_id; // dword 3 - 31:24 CS_CTL, 23:0 S_ID - ULONG f_ctl; // dword 4 - 31:24 Type, 23:0 F_CTL - ULONG seq_cnt; // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT - ULONG ox_rx_id; // dword 6 - 31:16 OX_ID, 15:0 RX_ID - ULONG ro; // dword 7 - relative offset -//--------- - __u32 pl[18]; // payload for FCP-RSP (response buffer) RA-4x00 is 72bytes -} TachFCHDR_RSP; - - - - - - -// Inbound Message Queue structures... -typedef struct // each entry 8 words (32 bytes) -{ - ULONG type; // IMQ completion message types - ULONG word[7]; // remainder of structure - // interpreted by IMQ type -} TachyonIMQE; - - -// Queues for TachLite not in original Tachyon -// ERQ - Exchange Request Queue (for outbound commands) -// SFQ - Single Frame Queue (for incoming frames) - - // Define Tachyon Outbound Command Que - // (Since many Tachyon registers are Read - // only, maintain copies for debugging) - // most Tach ques need power-of-2 sizes, - // where registers are loaded with po2 -1 -#define TACH_SEST_LEN 512 // TachLite SEST - -#define ELS_EXCHANGES 64 // e.g. PLOGI, RSCN, ... -// define the total number of outstanding (simultaneous) exchanges -#define TACH_MAX_XID (TACH_SEST_LEN + ELS_EXCHANGES) // ELS exchanges - -#define ERQ_LEN 128 // power of 2, max 4096 - -// Inbound Message Queue structures... -#define IMQ_LEN 512 // minimum 4 entries [(power of 2) - 1] -typedef struct // 8 words - 32 bytes -{ - TachyonIMQE QEntry[IMQ_LEN]; - ULONG producerIndex; // IMQ Producer Index register - // @32 byte align - ULONG consumerIndex; // Consumer Index register (in Tachyon) - ULONG length; // Length register - ULONG base; -} TachyonIMQ; // @ 32 * IMQ_LEN align - - - -typedef struct // inbound completion message -{ - ULONG Type; - ULONG Index; - ULONG TransferLength; -} TachyonInbCM; - - - -// arbitrary numeric tags for TL structures -#define TL_FCHS 1 // TachLite Fibre Channel Header Structure -#define TL_IWE 2 // initiator write entry (for SEST) -#define TL_TWE 3 // target write entry (for SEST) -#define TL_IRE 4 // initiator read entry (for SEST) -#define TL_TRE 5 // target read entry (for SEST) -#define TL_IRB 6 // I/O request block - - // for INCOMING frames -#define SFQ_LEN 32 // minimum 32 entries, max 4096 - -typedef struct // Single Frame Que -{ - TachFCHDR_CMND QEntry[SFQ_LEN]; // must be 64 bytes!! - ULONG producerIndex; // IMQ Producer Index register - // @32 byte align - ULONG consumerIndex; // Consumer Index register (in Tachyon) - ULONG length; // Length register - ULONG base; -} TachLiteSFQ; - - -typedef struct // I/O Request Block flags -{ - UCHAR BRD : 1; - UCHAR : 1; // reserved - UCHAR SFA : 1; - UCHAR DNC : 1; - UCHAR DIN : 1; - UCHAR DCM : 1; - UCHAR CTS : 1; - UCHAR SBV : 1; // IRB entry valid - IRB'B' only -} IRBflags; - -typedef struct // I/O Request Block -{ // Request 'A' - ULONG Req_A_SFS_Len; // total frame len (hdr + payload), min 32 - ULONG Req_A_SFS_Addr; // 32-bit pointer to FCHS struct (to be sent) - ULONG Req_A_SFS_D_ID; // 24-bit FC destination (i.e. 8 bit al_pa) - ULONG Req_A_Trans_ID; // X_ID (OX_ID or RX_ID) and/or Index in SEST - // Request 'B' - ULONG Req_B_SFS_Len; // total frame len (hdr + payload), min 32 - ULONG Req_B_SFS_Addr; // 32-bit pointer to FCHS struct (to be sent) - ULONG Req_B_SFS_D_ID; // 24-bit FC destination (i.e. 8 bit al_pa) - ULONG Req_B_Trans_ID; // X_ID (OX_ID or RX_ID) and/or Index in SEST -} TachLiteIRB; - - -typedef struct // TachLite placeholder for IRBs -{ // aligned @sizeof(ERQ) for TachLite - // MAX commands is sum of SEST len and ERQ - // we know that each SEST entry requires an - // IRB (ERQ) entry; in addition, we provide - // ERQ_LEN - TachLiteIRB QEntry[ERQ_LEN]; // Base register; entries 32 bytes ea. - ULONG consumerIndex; // Consumer Index register - ULONG producerIndex; // ERQ Producer Index register - ULONG length; // Length register - ULONG base; // copy of base ptr for debug - // struct is sized for largest expected cmnd (LOGIN) -} TachLiteERQ; - -// for now, just 32 bit DMA, eventually 40something, with code changes -#define CPQFCTS_DMA_MASK ((unsigned long) (0x00000000FFFFFFFF)) - -#define TL_MAX_SG_ELEM_LEN 0x7ffff // Max buffer length a single S/G entry - // may represent (a hardware limitation). The - // only reason to ever change this is if you - // want to exercise very-hard-to-reach code in - // cpqfcTSworker.c:build_SEST_sglist(). - -#define TL_DANGER_SGPAGES 7 // arbitrary high water mark for # of S/G pages - // we must exceed to elicit a warning indicative - // of EXTREMELY large data transfers or - // EXTREME memory fragmentation. - // (means we just used up 2048 S/G elements, - // Never seen this is real life, only in - // testing with tricked up driver.) - -#define TL_EXT_SG_PAGE_COUNT 256 // Number of Extended Scatter/Gather a/l PAIRS - // Tachyon register (IOBaseU 0x68) - // power-of-2 value ONLY! 4 min, 256 max - - // byte len is #Pairs * 2 ULONG/Pair * 4 bytes/ULONG -#define TL_EXT_SG_PAGE_BYTELEN (TL_EXT_SG_PAGE_COUNT *2 *4) - - - -// SEST entry types: IWE, IRE, TWE, TRE -typedef struct -{ - ULONG Hdr_Len; - ULONG Hdr_Addr; - ULONG RSP_Len; - ULONG RSP_Addr; - ULONG Buff_Off; -#define USES_EXTENDED_SGLIST(this_sest, x_ID) \ - (!((this_sest)->u[ x_ID ].IWE.Buff_Off & 0x80000000)) - ULONG Link; - ULONG RX_ID; - ULONG Data_Len; - ULONG Exp_RO; - ULONG Exp_Byte_Cnt; - // --- extended/local Gather Len/Address pairs - ULONG GLen1; - ULONG GAddr1; - ULONG GLen2; - ULONG GAddr2; - ULONG GLen3; - ULONG GAddr3; -} TachLiteIWE; - - -typedef struct -{ - ULONG Seq_Accum; - ULONG reserved; // must clear to 0 - ULONG RSP_Len; - ULONG RSP_Addr; - ULONG Buff_Off; - ULONG Buff_Index; // ULONG 5 - ULONG Exp_RO; - ULONG Byte_Count; - ULONG reserved_; // ULONG 8 - ULONG Exp_Byte_Cnt; - // --- extended/local Scatter Len/Address pairs - ULONG SLen1; - ULONG SAddr1; - ULONG SLen2; - ULONG SAddr2; - ULONG SLen3; - ULONG SAddr3; -} TachLiteIRE; - - -typedef struct // Target Write Entry -{ - ULONG Seq_Accum; // dword 0 - ULONG reserved; // dword 1 must clear to 0 - ULONG Remote_Node_ID; - ULONG reserved1; // dword 3 must clear to 0 - ULONG Buff_Off; - ULONG Buff_Index; // ULONG 5 - ULONG Exp_RO; - ULONG Byte_Count; - ULONG reserved_; // ULONG 8 - ULONG Exp_Byte_Cnt; - // --- extended/local Scatter Len/Address pairs - ULONG SLen1; - ULONG SAddr1; - ULONG SLen2; - ULONG SAddr2; - ULONG SLen3; - ULONG SAddr3; -} TachLiteTWE; - -typedef struct -{ - ULONG Hdr_Len; - ULONG Hdr_Addr; - ULONG RSP_Len; // DWord 2 - ULONG RSP_Addr; - ULONG Buff_Off; - ULONG Buff_Index; // DWord 5 - ULONG reserved; - ULONG Data_Len; - ULONG reserved_; - ULONG reserved__; - // --- extended/local Gather Len/Address pairs - ULONG GLen1; // DWord A - ULONG GAddr1; - ULONG GLen2; - ULONG GAddr2; - ULONG GLen3; - ULONG GAddr3; -} TachLiteTRE; - -typedef struct ext_sg_page_ptr_t *PSGPAGES; -typedef struct ext_sg_page_ptr_t -{ - unsigned char page[TL_EXT_SG_PAGE_BYTELEN * 2]; // 2x for alignment - dma_addr_t busaddr; // need the bus addresses and - unsigned int maplen; // lengths for later pci unmapping. - PSGPAGES next; -} SGPAGES; // linked list of S/G pairs, by Exchange - -typedef struct // SCSI Exchange State Table -{ - union // Entry can be IWE, IRE, TWE, TRE - { // 64 bytes per entry - TachLiteIWE IWE; - TachLiteIRE IRE; - TachLiteTWE TWE; - TachLiteTRE TRE; - } u[TACH_SEST_LEN]; - - TachFCHDR DataHDR[TACH_SEST_LEN]; // for SEST FCP_DATA frame hdr (no pl) - TachFCHDR_RSP RspHDR[TACH_SEST_LEN]; // space for SEST FCP_RSP frame - PSGPAGES sgPages[TACH_SEST_LEN]; // head of linked list of Pool-allocations - ULONG length; // Length register - ULONG base; // copy of base ptr for debug -} TachSEST; - - - -typedef struct // each register has it's own address - // and value (used for write-only regs) -{ - void* address; - volatile ULONG value; -} FCREGISTER; - -typedef struct // Host copy - TachLite Registers -{ - ULONG IOBaseL, IOBaseU; // I/O port lower and upper TL register addresses - ULONG MemBase; // memory mapped register addresses - void* ReMapMemBase; // O/S VM reference for MemBase - ULONG wwn_hi; // WWN is set once at startup - ULONG wwn_lo; - ULONG my_al_pa; // al_pa received after LIP() - ULONG ROMCTR; // flags for on-board RAM/ROM - ULONG RAMBase; // on-board RAM (i.e. some Tachlites) - ULONG SROMBase; // on-board EEPROM (some Tachlites) - ULONG PCIMCTR; // PCI Master Control Reg (has bus width) - - FCREGISTER INTEN; // copy of interrupt enable mask - FCREGISTER INTPEND; // interrupt pending - FCREGISTER INTSTAT; // interrupt status - FCREGISTER SFQconsumerIndex; - FCREGISTER ERQproducerIndex; - FCREGISTER TYconfig; // TachYon (chip level) - FCREGISTER TYcontrol; - FCREGISTER TYstatus; - FCREGISTER FMconfig; // Frame Manager (FC loop level) - FCREGISTER FMcontrol; - FCREGISTER FMstatus; - FCREGISTER FMLinkStatus1; - FCREGISTER FMLinkStatus2; - FCREGISTER FMBB_CreditZero; - FCREGISTER status; - FCREGISTER ed_tov; // error detect time-out value - FCREGISTER rcv_al_pa; // received arb. loop physical address - FCREGISTER primitive; // e.g. LIP(), OPN(), ... -} TL_REGISTERS; - - - -typedef struct -{ - ULONG ok; - ULONG invalidArgs; - ULONG linkDown; - ULONG linkUp; - ULONG outQueFull; - ULONG SESTFull; - ULONG hpe; // host programming err (from Tach) - ULONG FC4aborted; // aborts from Application or upper driver layer - ULONG FC2aborted; // aborts from our driver's timeouts - ULONG timeouts; // our driver timeout (on individual exchanges) - ULONG logouts; // explicit - sent LOGO; implicit - device removed - ULONG retries; - ULONG linkFailTX; - ULONG linkFailRX; - ULONG CntErrors; // byte count expected != count received (typ. SEST) - ULONG e_stores; // elastic store errs - ULONG resets; // hard or soft controller resets - ULONG FMinits; // TACH Frame Manager Init (e.g. LIPs) - ULONG lnkQueFull; // too many LOGIN, loop commands - ULONG ScsiQueFull; // too many FCP-SCSI inbound frames - ULONG LossofSignal; // FM link status 1 regs - ULONG BadRXChar; // FM link status 1 regs - ULONG LossofSync; // FM link status 1 regs - ULONG Rx_EOFa; // FM link status 2 regs (received EOFa) - ULONG Dis_Frm; // FM link status 2 regs (discarded frames) - ULONG Bad_CRC; // FM link status 2 regs - ULONG BB0_Timer; // FM BB_Credit Zero Timer Reg - ULONG loopBreaks; // infinite loop exits - ULONG lastBB0timer; // static accum. buffer needed by Tachlite -} FCSTATS; - - -typedef struct // Config Options -{ // LS Bit first - USHORT : 1; // bit0: - USHORT flogi : 1; // bit1: We sent FLOGI - wait for Fabric logins - USHORT fabric: 1; // bit2: Tachyon detected Fabric (FM stat LG) - USHORT LILPin: 1; // bit3: We can use an FC-AL LILP frame - USHORT target: 1; // bit4: this Port has SCSI target capability - USHORT initiator: 1; // bit5: this Port has SCSI initiator capability - USHORT extLoopback: 1; // bit6: loopback at GBIC - USHORT intLoopback: 1; // bit7: loopback in HP silicon - USHORT : 1; // bit8: - USHORT : 1; // bit9: - USHORT : 1; // bit10: - USHORT : 1; // bit11: - USHORT : 1; // bit12: - USHORT : 1; // bit13: - USHORT : 1; // bit14: - USHORT : 1; // bit15: -} FC_OPTIONS; - - - -typedef struct dyn_mem_pair -{ - void *BaseAllocated; // address as allocated from O/S; - unsigned long AlignedAddress; // aligned address (used by Tachyon DMA) - dma_addr_t dma_handle; - size_t size; -} ALIGNED_MEM; - - - - -// these structs contain only CRUCIAL (stuff we actually use) parameters -// from FC-PH(n) logins. (Don't save entire LOGIN payload to save mem.) - -// Implicit logout happens when the loop goes down - we require PDISC -// to restore. Explicit logout is when WE decide never to talk to someone, -// or when a target refuses to talk to us, i.e. sends us a LOGO frame or -// LS_RJT reject in response to our PLOGI request. - -#define IMPLICIT_LOGOUT 1 -#define EXPLICIT_LOGOUT 2 - -typedef struct -{ - UCHAR channel; // SCSI "bus" - UCHAR target; - UCHAR InqDeviceType; // byte 0 from SCSI Inquiry response - UCHAR VolumeSetAddressing; // FCP-SCSI LUN coding (40h for VSA) - UCHAR LunMasking; // True if selective presentation supported - UCHAR lun[CPQFCTS_MAX_LUN]; -} SCSI_NEXUS; - - -typedef struct -{ - union - { - UCHAR ucWWN[8]; // a FC 64-bit World Wide Name/ PortID of target - // addressing of single target on single loop... - u64 liWWN; - } u; - - ULONG port_id; // a FC 24-bit address of port (lower 8 bits = al_pa) - -#define REPORT_LUNS_PL 256 - UCHAR ReportLunsPayload[REPORT_LUNS_PL]; - - SCSI_NEXUS ScsiNexus; // LUNs per FC device - - ULONG LOGO_counter; // might try several times before logging out for good - ULONG LOGO_timer; // after LIP, ports expecting PDISC must time-out and - // LOGOut if successful PDISC not completed in 2 secs - - ULONG concurrent_seq; // must be 1 or greater - ULONG rx_data_size; // e.g. 128, 256, 1024, 2048 per FC-PH spec - ULONG BB_credit; - ULONG EE_credit; - - ULONG fcp_info; // from PRLI (i.e. INITIATOR/ TARGET flags) - // flags for login process - BOOLEAN Originator; // Login sequence Originated (if false, we - // responded to another port's login sequence) - BOOLEAN plogi; // PLOGI frame ACCepted (originated or responded) - BOOLEAN pdisc; // PDISC frame was ORIGINATED (self-login logic) - BOOLEAN prli; // PRLI frame ACCepted (originated or responded) - BOOLEAN flogi; // FLOGI frame ACCepted (originated or responded) - BOOLEAN logo; // port permanently logged out (invalid login param) - BOOLEAN flogiReq; // Fabric login required (set in LIP process) - UCHAR highest_ver; - UCHAR lowest_ver; - - - // when the "target" (actually FC Port) is waiting for login - // (e.g. after Link reset), set the device_blocked bit; - // after Port completes login, un-block target. - UCHAR device_blocked; // see Scsi_Device struct - - // define singly-linked list of logged-in ports - // once a port_id is identified, it is remembered, - // even if the port is removed indefinitely - PVOID pNextPort; // actually, type PFC_LOGGEDIN_PORT; void for Compiler - -} FC_LOGGEDIN_PORT, *PFC_LOGGEDIN_PORT; - - - -// This serves as the ESB (Exchange Status Block), -// and has timeout counter; used for ABORTs -typedef struct -{ // FC-1 X_IDs - ULONG type; // ELS_PLOGI, SCSI_IWE, ... (0 if free) - PFC_LOGGEDIN_PORT pLoggedInPort; // FC device on other end of Exchange - Scsi_Cmnd *Cmnd; // Linux SCSI command packet includes S/G list - ULONG timeOut; // units of ??, DEC by driver, Abort when 0 - ULONG reTries; // need one or more retries? - ULONG status; // flags indicating errors (0 if none) - TachLiteIRB IRB; // I/O Request Block, gets copied to ERQ - TachFCHDR_GCMND fchs; // location of IRB's Req_A_SFS_Addr -} FC_EXCHANGE, *PFC_EXCHANGE; - -// Unfortunately, Linux limits our kmalloc() allocations to 128k. -// Because of this and the fact that our ScsiRegister allocation -// is also constrained, we move this large structure out for -// allocation after Scsi Register. -// (In other words, this cumbersome indirection is necessary -// because of kernel memory allocation constraints!) - -typedef struct // we will allocate this dynamically -{ - FC_EXCHANGE fcExchange[ TACH_MAX_XID ]; -} FC_EXCHANGES; - - - - - - - - - - - -typedef struct -{ - char Name[64]; // name of controller ("HP Tachlite TL Rev2.0, 33MHz, 64bit bus") - //PVOID pAdapterDevExt; // back pointer to device object/extension - ULONG ChipType; // local numeric key for Tachyon Type / Rev. - ULONG status; // our Driver - logical status - - TL_REGISTERS Registers; // reg addresses & host memory copies - // FC-4 mapping of 'transaction' to X_IDs - UCHAR LILPmap[32*4]; // Loop Position Map of ALPAs (late FC-AL only) - FC_OPTIONS Options; // e.g. Target, Initiator, loopback... - UCHAR highest_FCPH_ver; // FC-PH version limits - UCHAR lowest_FCPH_ver; // FC-PH version limits - - FC_EXCHANGES *Exchanges; - ULONG fcLsExchangeLRU; // Least Recently Used counter (Link Service) - ULONG fcSestExchangeLRU; // Least Recently Used counter (FCP-SCSI) - FC_LOGGEDIN_PORT fcPorts; // linked list of every FC port ever seen - FCSTATS fcStats; // FC comm err counters - - // Host memory QUEUE pointers - TachLiteERQ *ERQ; // Exchange Request Que - TachyonIMQ *IMQ; // Inbound Message Que - TachLiteSFQ *SFQ; // Single Frame Queue - TachSEST *SEST; // SCSI Exchange State Table - - dma_addr_t exch_dma_handle; - - // these function pointers are for "generic" functions, which are - // replaced with Host Bus Adapter types at - // runtime. - int (*CreateTachyonQues)( void* , int); - int (*DestroyTachyonQues)( void* , int); - int (*LaserControl)(void*, int ); // e.g. On/Off - int (*ResetTachyon)(void*, int ); - void (*FreezeTachyon)(void*, int ); - void (*UnFreezeTachyon)(void*, int ); - int (*InitializeTachyon)(void*, int, int ); - int (*InitializeFrameManager)(void*, int ); - int (*ProcessIMQEntry)(void*); - int (*ReadWriteWWN)(void*, int ReadWrite); - int (*ReadWriteNVRAM)(void*, void*, int ReadWrite); - -} TACHYON, *PTACHYON; - - -void cpqfcTSClearLinkStatusCounters(TACHYON * fcChip); - -int CpqTsCreateTachLiteQues( void* pHBA, int opcode); -int CpqTsDestroyTachLiteQues( void* , int); -int CpqTsInitializeTachLite( void *pHBA, int opcode1, int opcode2); - -int CpqTsProcessIMQEntry(void* pHBA); -int CpqTsResetTachLite(void *pHBA, int type); -void CpqTsFreezeTachlite(void *pHBA, int type); -void CpqTsUnFreezeTachlite(void *pHBA, int type); -int CpqTsInitializeFrameManager(void *pHBA, int); -int CpqTsLaserControl( void* addrBase, int opcode ); -int CpqTsReadWriteWWN(void*, int ReadWrite); -int CpqTsReadWriteNVRAM(void*, void* data, int ReadWrite); - -void cpqfcTS_WorkTask( struct Scsi_Host *HostAdapter); -void cpqfcTSWorkerThread( void *host); - -int cpqfcTS_GetNVRAM_data( UCHAR *wwnbuf, UCHAR *buf ); -ULONG cpqfcTS_ReadNVRAM( void* GPIOin, void* GPIOout , USHORT count, - UCHAR *buf ); - -BOOLEAN tl_write_i2c_nvram( void* GPIOin, void* GPIOout, - USHORT startOffset, // e.g. 0x2f for WWN start - USHORT count, - UCHAR *buf ); - - -// define misc functions -int cpqfcTSGetLPSM( PTACHYON fcChip, char cErrorString[]); -int cpqfcTSDecodeGBICtype( PTACHYON fcChip, char cErrorString[]); -void* fcMemManager( struct pci_dev *pdev, - ALIGNED_MEM *dyn_mem_pair, ULONG n_alloc, ULONG ab, - ULONG ulAlignedAddress, dma_addr_t *dma_handle); - -void BigEndianSwap( UCHAR *source, UCHAR *dest, USHORT cnt); - -//ULONG virt_to_phys( PVOID virtaddr ); - - -// Linux interrupt handler -irqreturn_t cpqfcTS_intr_handler( int irq,void *dev_id,struct pt_regs *regs); -void cpqfcTSheartbeat( unsigned long ptr ); - - - -// The biggest Q element we deal with is Aborts - we -// need 4 bytes for x_ID, and a Scsi_Cmnd (~284 bytes) -//#define LINKQ_ITEM_SIZE ((4+sizeof(Scsi_Cmnd)+3)/4) -#define LINKQ_ITEM_SIZE (3*16) -typedef struct -{ - ULONG Type; // e.g. LINKUP, SFQENTRY, PDISC, BLS_ABTS, ... - ULONG ulBuff[ LINKQ_ITEM_SIZE ]; -} LINKQ_ITEM; - -#define FC_LINKQ_DEPTH TACH_MAX_XID -typedef struct -{ - ULONG producer; - ULONG consumer; // when producer equals consumer, Q empty - - LINKQ_ITEM Qitem[ FC_LINKQ_DEPTH ]; - -} FC_LINK_QUE, *PFC_LINK_QUE; - - - // DPC routines post to here on Inbound SCSI frames - // User thread processes -#define FC_SCSIQ_DEPTH 32 - -typedef struct -{ - int Type; // e.g. SCSI - ULONG ulBuff[ 3*16 ]; -} SCSIQ_ITEM; - -typedef struct -{ - ULONG producer; - ULONG consumer; // when producer equals consumer, Q empty - - SCSIQ_ITEM Qitem[ FC_SCSIQ_DEPTH ]; - -} FC_SCSI_QUE, *PFC_SCSI_QUE; - -typedef struct { - /* This is tacked on to a Scsi_Request in upper_private_data - for pasthrough ioctls, as a place to hold data that can't - be stashed anywhere else in the Scsi_Request. We differentiate - this from _real_ upper_private_data by checking if the virt addr - is within our special pool. */ - ushort bus; - ushort pdrive; -} cpqfc_passthru_private_t; - -#define CPQFC_MAX_PASSTHRU_CMDS 100 - -#define DYNAMIC_ALLOCATIONS 4 // Tachyon aligned allocations: ERQ,IMQ,SFQ,SEST - -// Linux space allocated per HBA (chip state, etc.) -typedef struct -{ - struct Scsi_Host *HostAdapter; // back pointer to Linux Scsi struct - - TACHYON fcChip; // All Tachyon registers, Queues, functions - ALIGNED_MEM dynamic_mem[DYNAMIC_ALLOCATIONS]; - - struct pci_dev *PciDev; - dma_addr_t fcLQ_dma_handle; - - Scsi_Cmnd *LinkDnCmnd[CPQFCTS_REQ_QUEUE_LEN]; // collects Cmnds during LDn - // (for Acceptable targets) - Scsi_Cmnd *BoardLockCmnd[CPQFCTS_REQ_QUEUE_LEN]; // SEST was full - - Scsi_Cmnd *BadTargetCmnd[CPQFCTS_MAX_TARGET_ID]; // missing targets - - u_char HBAnum; // 0-based host number - - - struct timer_list cpqfcTStimer; // FC utility timer for implicit - // logouts, FC protocol timeouts, etc. - int fcStatsTime; // Statistics delta reporting time - - struct task_struct *worker_thread; // our kernel thread - int PortDiscDone; // set by SendLogins(), cleared by LDn - - struct semaphore *TachFrozen; - struct semaphore *TYOBcomplete; // handshake for Tach outbound frames - struct semaphore *fcQueReady; // FibreChannel work for our kernel thread - struct semaphore *notify_wt; // synchronizes kernel thread kill - struct semaphore *BoardLock; - - PFC_LINK_QUE fcLQ; // the WorkerThread operates on this - - spinlock_t hba_spinlock; // held/released by WorkerThread - cpqfc_passthru_private_t *private_data_pool; - unsigned long *private_data_bits; - -} CPQFCHBA; - -#define CPQ_SPINLOCK_HBA( x ) spin_lock(&x->hba_spinlock); -#define CPQ_SPINUNLOCK_HBA(x) spin_unlock(&x->hba_spinlock); - - - -void cpqfcTSImplicitLogout( CPQFCHBA* cpqfcHBAdata, - PFC_LOGGEDIN_PORT pFcPort); - - -void cpqfcTSTerminateExchange( CPQFCHBA*, SCSI_NEXUS *target, int ); - -PFC_LOGGEDIN_PORT fcPortLoggedIn( - CPQFCHBA *cpqfcHBAdata, - TachFCHDR_GCMND* fchs, - BOOLEAN, - BOOLEAN); -void fcProcessLoggedIn( - CPQFCHBA *cpqfcHBAdata, TachFCHDR_GCMND* fchs); - - -ULONG cpqfcTSBuildExchange( - CPQFCHBA *cpqfcHBAdata, - ULONG type, // e.g. PLOGI - TachFCHDR_GCMND* InFCHS, // incoming FCHS - void *Data, // the CDB, scatter/gather, etc. - LONG *ExchangeID ); // allocated exchange ID - -ULONG cpqfcTSStartExchange( - CPQFCHBA *cpqfcHBAdata, - LONG ExchangeID ); - -void cpqfcTSCompleteExchange( - struct pci_dev *pcidev, - PTACHYON fcChip, - ULONG exchange_ID); - - -PFC_LOGGEDIN_PORT fcFindLoggedInPort( - PTACHYON fcChip, - Scsi_Cmnd *Cmnd, // (We want the channel/target/lun Nexus from Cmnd) - ULONG port_id, // search linked list for al_pa, or - UCHAR wwn[8], // search linked list for WWN, or... - PFC_LOGGEDIN_PORT *pLastLoggedInPort -); - -void cpqfcTSPutLinkQue( - CPQFCHBA *cpqfcHBAdata, - int Type, - void *QueContent); - -void fcPutScsiQue( - CPQFCHBA *cpqfcHBAdata, - int Type, - void *QueContent); - -void fcLinkQReset( - CPQFCHBA *); -void fcScsiQReset( - CPQFCHBA *); -void fcSestReset( - CPQFCHBA *); - -void cpqfc_pci_unmap(struct pci_dev *pcidev, - Scsi_Cmnd *cmd, - PTACHYON fcChip, - ULONG x_ID); - -extern const UCHAR valid_al_pa[]; -extern const int number_of_al_pa; - -#define FCP_RESID_UNDER 0x80000 -#define FCP_RESID_OVER 0x40000 -#define FCP_SNS_LEN_VALID 0x20000 -#define FCP_RSP_LEN_VALID 0x10000 - -// RSP_CODE definitions (dpANS Fibre Channel Protocol for SCSI, pg 34) -#define FCP_DATA_LEN_NOT_BURST_LEN 0x1000000 -#define FCP_CMND_FIELD_INVALID 0x2000000 -#define FCP_DATA_RO_NOT_XRDY_RO 0x3000000 -#define FCP_TASKFUNCTION_NS 0x4000000 -#define FCP_TASKFUNCTION_FAIL 0x5000000 - -// FCP-SCSI response status struct -typedef struct // see "TachFCHDR_RSP" definition - 64 bytes -{ - __u32 reserved; - __u32 reserved1; - __u32 fcp_status; // field validity and SCSI status - __u32 fcp_resid; - __u32 fcp_sns_len; // length of FCP_SNS_INFO field - __u32 fcp_rsp_len; // length of FCP_RSP_INFO field (expect 8) - __u32 fcp_rsp_info; // 4 bytes of FCP protocol response information - __u32 fcp_rsp_info2; // (4 more bytes, since most implementations use 8) - __u8 fcp_sns_info[36]; // bytes for SCSI sense (ASC, ASCQ) - -} FCP_STATUS_RESPONSE, *PFCP_STATUS_RESPONSE; - - -// Fabric State Change Registration -typedef struct scrpl -{ - __u32 command; - __u32 function; -} SCR_PL; - -// Fabric Name Service Request -typedef struct nsrpl -{ - __u32 CT_Rev; // (& IN_ID) WORD 0 - __u32 FCS_Type; // WORD 1 - __u32 Command_code; // WORD 2 - __u32 reason_code; // WORD 3 - __u32 FCP; // WORD 4 (lower byte) - -} NSR_PL; - - - -// "FC.H" -#define MAX_RX_SIZE 0x800 // Max Receive Buffer Size is 2048 -#define MIN_RX_SIZE 0x100 // Min Size is 256, per FC-PLDA Spec -#define MAX_TARGET_RXIDS SEST_DEPTH -#define TARGET_RX_SIZE SEST_BUFFER_LENGTH - -#define CLASS_1 0x01 -#define CLASS_2 0x02 -#define CLASS_3 0x03 - -#define FC_PH42 0x08 -#define FC_PH43 0x09 -#define FC_PH3 0x20 - -#define RR_TOV 2 // Minimum Time for target to wait for - // PDISC after a LIP. -#define E_D_TOV 2 // Minimum Time to wait for Sequence - // Completion. -#define R_A_TOV 0 // Minimum Time for Target to wait - // before reclaiming resources. -// -// R_CTL Field -// -// Routing Bits (31-28) -// -#define FC4_DEVICE_DATA 0x00000000 -#define EXT_LINK_DATA 0x20000000 -#define FC4_LINK_DATA 0x30000000 -#define VIDEO_DATA 0x40000000 -#define BASIC_LINK_DATA 0x80000000 -#define LINK_CONTROL 0xC0000000 -#define ROUTING_MASK 0xF0000000 - -// -// Information Bits (27-24) -// -#define UNCAT_INFORMATION 0x00000000 -#define SOLICITED_DATA 0x01000000 -#define UNSOLICITED_CONTROL 0x02000000 -#define SOLICITED_CONTROL 0x03000000 -#define UNSOLICITED_DATA 0x04000000 -#define DATA_DESCRIPTOR 0x05000000 -#define UNSOLICITED_COMMAND 0x06000000 -#define COMMAND_STATUS 0x07000000 -#define INFO_MASK 0x0F000000 -// -// (Link Control Codes) -// -#define ACK_1 0x00000000 -#define ACK_0_OR_N 0x01000000 -#define P_RJT 0x02000000 -#define F_RJT 0x03000000 -#define P_BSY 0x04000000 -#define FABRIC_BUSY_TO_DF 0x05000000 // Fabric Busy to Data Frame -#define FABRIC_BUSY_TO_LC 0x06000000 // Fabric Busy to Link Ctl Frame -#define LINK_CREDIT_RESET 0x07000000 -// -// (Link Service Command Codes) -// -//#define LS_RJT 0x01000000 // LS Reject - -#define LS_ACC 0x02000000 // LS Accept -#define LS_PLOGI 0x03000000 // N_PORT Login -#define LS_FLOGI 0x04000000 // F_PORT Login -#define LS_LOGO 0x05000000 // Logout -#define LS_ABTX 0x06000000 // Abort Exchange -#define LS_RCS 0x07000000 // Read Connection Status -#define LS_RES 0x08000000 // Read Exchange Status -#define LS_RSS 0x09000000 // Read Sequence Status -#define LS_RSI 0x0A000000 // Request Seq Initiative -#define LS_ESTS 0x0B000000 // Establish Steaming -#define LS_ESTC 0x0C000000 // Estimate Credit -#define LS_ADVC 0x0D000000 // Advice Credit -#define LS_RTV 0x0E000000 // Read Timeout Value -#define LS_RLS 0x0F000000 // Read Link Status -#define LS_ECHO 0x10000000 // Echo -#define LS_TEST 0x11000000 // Test -#define LS_RRQ 0x12000000 // Reinstate Rec. Qual. -#define LS_PRLI 0x20000000 // Process Login -#define LS_PRLO 0x21000000 // Process Logout -#define LS_TPRLO 0x24000000 // 3rd Party Process Logout -#define LS_PDISC 0x50000000 // Process Discovery -#define LS_FDISC 0x51000000 // Fabric Discovery -#define LS_ADISC 0x52000000 // Discover Address -#define LS_RNC 0x53000000 // Report Node Capability -#define LS_SCR 0x62000000 // State Change Registration -#define LS_MASK 0xFF000000 - -// -// TYPE Bit Masks -// -#define BASIC_LINK_SERVICE 0x00000000 -#define EXT_LINK_SERVICE 0x01000000 - -#define LLC 0x04000000 -#define LLC_SNAP 0x05000000 -#define SCSI_FCP 0x08000000 -#define SCSI_GPP 0x09000000 -#define IPI3_MASTER 0x11000000 -#define IPI3_SLAVE 0x12000000 -#define IPI3_PEER 0x13000000 -#define CP_IPI3_MASTER 0x15000000 -#define CP_IPI3_SLAVE 0x16000000 -#define CP_IPI3_PEER 0x17000000 -#define SBCCS_CHANNEL 0x19000000 -#define SBCCS_CONTROL 0x1A000000 -#define FIBRE_SERVICES 0x20000000 -#define FC_FG 0x21000000 -#define FC_XS 0x22000000 -#define FC_AL 0x23000000 -#define SNMP 0x24000000 -#define HIPPI_FP 0x40000000 -#define TYPE_MASK 0xFF000000 - -typedef struct { - UCHAR seq_id_valid; - UCHAR seq_id; - USHORT reserved; // 2 bytes reserved - ULONG ox_rx_id; - USHORT low_seq_cnt; - USHORT high_seq_cnt; -} BA_ACC_PAYLOAD; - -typedef struct { - UCHAR reserved; - UCHAR reason_code; - UCHAR reason_explain; - UCHAR vendor_unique; -} BA_RJT_PAYLOAD; - - -typedef struct { - ULONG command_code; - ULONG sid; - USHORT ox_id; - USHORT rx_id; -} RRQ_MESSAGE; - -typedef struct { - ULONG command_code; - UCHAR vendor; - UCHAR explain; - UCHAR reason; - UCHAR reserved; -} REJECT_MESSAGE; - - -#define N_OR_F_PORT 0x1000 -#define RANDOM_RELATIVE_OFFSET 0x4000 -#define CONTINUOSLY_INCREASING 0x8000 - -#define CLASS_VALID 0x8000 -#define INTERMIX_MODE 0x4000 -#define TRANSPARENT_STACKED 0x2000 -#define LOCKDOWN_STACKED 0x1000 -#define SEQ_DELIVERY 0x800 - -#define XID_NOT_SUPPORTED 0x00 -#define XID_SUPPORTED 0x4000 -#define XID_REQUIRED 0xC000 - -#define ASSOCIATOR_NOT_SUPPORTED 0x00 -#define ASSOCIATOR_SUPPORTED 0x1000 -#define ASSOCIATOR_REQUIRED 0x3000 - -#define INIT_ACK0_SUPPORT 0x800 -#define INIT_ACKN_SUPPORT 0x400 - -#define RECIP_ACK0_SUPPORT 0x8000 -#define RECIP_ACKN_SUPPORT 0x4000 - -#define X_ID_INTERLOCK 0x2000 - -#define ERROR_POLICY 0x1800 // Error Policy Supported -#define ERROR_DISCARD 0x00 // Only Discard Supported -#define ERROR_DISC_PROCESS 0x02 // Discard and process supported - -#define NODE_ID 0x01 -#define IEEE_EXT 0x20 - -// -// Categories Supported Per Sequence -// -#define CATEGORIES_PER_SEQUENCE 0x300 -#define ONE_CATEGORY_SEQUENCE 0x00 // 1 Category per Sequence -#define TWO_CATEGORY_SEQUENCE 0x01 // 2 Categories per Sequence -#define MANY_CATEGORY_SEQUENCE 0x03 // > 2 Categories/Sequence - -typedef struct { - - USHORT initiator_control; - USHORT service_options; - - USHORT rx_data_size; - USHORT recipient_control; - - USHORT ee_credit; - USHORT concurrent_sequences; - - USHORT reserved; - USHORT open_sequences; - -} CLASS_PARAMETERS; - -typedef struct { - ULONG login_cmd; - // - // Common Service Parameters - // - struct { - - USHORT bb_credit; - UCHAR lowest_ver; - UCHAR highest_ver; - - USHORT bb_rx_size; - USHORT common_features; - - USHORT rel_offset; - USHORT concurrent_seq; - - - ULONG e_d_tov; - } cmn_services; - - // - // Port Name - // - UCHAR port_name[8]; - - // - // Node/Fabric Name - // - UCHAR node_name[8]; - - // - // Class 1, 2 and 3 Service Parameters - // - CLASS_PARAMETERS class1; - CLASS_PARAMETERS class2; - CLASS_PARAMETERS class3; - - ULONG reserved[4]; - - // - // Vendor Version Level - // - UCHAR vendor_id[2]; - UCHAR vendor_version[6]; - ULONG buffer_size; - USHORT rxid_start; - USHORT total_rxids; -} LOGIN_PAYLOAD; - - -typedef struct -{ - ULONG cmd; // 4 bytes - UCHAR n_port_identifier[3]; - UCHAR reserved; - UCHAR port_name[8]; -} LOGOUT_PAYLOAD; - - -// -// PRLI Request Service Parameter Defines -// -#define PRLI_ACC 0x01 -#define PRLI_REQ 0x02 -#define ORIG_PROCESS_ASSOC_VALID 0x8000 -#define RESP_PROCESS_ASSOC_VALID 0x4000 -#define ESTABLISH_PAIR 0x2000 -#define DATA_OVERLAY_ALLOWED 0x40 -#define INITIATOR_FUNCTION 0x20 -#define TARGET_FUNCTION 0x10 -#define CMD_DATA_MIXED 0x08 -#define DATA_RESP_MIXED 0x04 -#define READ_XFER_RDY 0x02 -#define WRITE_XFER_RDY 0x01 - -#define RESPONSE_CODE_MASK 0xF00 -#define REQUEST_EXECUTED 0x100 -#define NO_RESOURCES 0x200 -#define INIT_NOT_COMPLETE 0x300 -#define IMAGE_DOES_NOT_EXIST 0x400 -#define BAD_PREDEFINED_COND 0x500 -#define REQ_EXEC_COND 0x600 -#define NO_MULTI_PAGE 0x700 - -typedef struct { - USHORT payload_length; - UCHAR page_length; - UCHAR cmd; - - - ULONG valid; - - ULONG orig_process_associator; - - ULONG resp_process_associator; - - ULONG fcp_info; -} PRLI_REQUEST; - -typedef struct { - - USHORT payload_length; - UCHAR page_length; - UCHAR cmd; - - ULONG valid; - ULONG orig_process_associator; - - ULONG resp_process_associator; - ULONG reserved; -} PRLO_REQUEST; - -typedef struct { - ULONG cmd; - - ULONG hard_address; - - UCHAR port_name[8]; - - UCHAR node_name[8]; - - ULONG s_id; -} ADISC_PAYLOAD; - -struct ext_sg_entry_t { - __u32 len:18; /* buffer length, bits 0-17 */ - __u32 uba:13; /* upper bus address bits 18-31 */ - __u32 lba; /* lower bus address bits 0-31 */ -}; - - -// J. McCarty's LINK.H -// -// LS_RJT Reason Codes -// - -#define INVALID_COMMAND_CODE 0x01 -#define LOGICAL_ERROR 0x03 -#define LOGICAL_BUSY 0x05 -#define PROTOCOL_ERROR 0x07 -#define UNABLE_TO_PERFORM 0x09 -#define COMMAND_NOT_SUPPORTED 0x0B -#define LS_VENDOR_UNIQUE 0xFF - -// -// LS_RJT Reason Codes Explanations -// -#define NO_REASON 0x00 -#define OPTIONS_ERROR 0x01 -#define INITIATOR_CTL_ERROR 0x03 -#define RECIPIENT_CTL_ERROR 0x05 -#define DATA_FIELD_SIZE_ERROR 0x07 -#define CONCURRENT_SEQ_ERROR 0x09 -#define CREDIT_ERROR 0x0B -#define INVALID_PORT_NAME 0x0D -#define INVALID_NODE_NAME 0x0E -#define INVALID_CSP 0x0F // Invalid Service Parameters -#define INVALID_ASSOC_HDR 0x11 // Invalid Association Header -#define ASSOC_HDR_REQUIRED 0x13 // Association Header Required -#define LS_INVALID_S_ID 0x15 -#define INVALID_OX_RX_ID 0x17 // Invalid OX_ID RX_ID Combination -#define CMD_IN_PROCESS 0x19 -#define INVALID_IDENTIFIER 0x1F // Invalid N_PORT Identifier -#define INVALID_SEQ_ID 0x21 -#define ABT_INVALID_XCHNG 0x23 // Attempt to Abort an invalid Exchange -#define ABT_INACTIVE_XCHNG 0x25 // Attempt to Abort an inactive Exchange -#define NEED_REC_QUAL 0x27 // Recovery Qualifier required -#define NO_LOGIN_RESOURCES 0x29 // No resources to support login -#define NO_DATA 0x2A // Unable to supply requested data -#define REQUEST_NOT_SUPPORTED 0x2C // Request Not Supported - -// -// Link Control Codes -// - -// -// P_BSY Action Codes -// -#define SEQUENCE_TERMINATED 0x01000000 -#define SEQUENCE_ACTIVE 0x02000000 - -// -// P_BSY Reason Codes -// -#define PHYS_NPORT_BUSY 0x010000 -#define NPORT_RESOURCE_BUSY 0x020000 - -// -// P_RJT, F_RJT Action Codes -// - -#define RETRYABLE_ERROR 0x01000000 -#define NON_RETRYABLE_ERROR 0x02000000 - -// -// P_RJT, F_RJT Reason Codes -// -#define INVALID_D_ID 0x010000 -#define INVALID_S_ID 0x020000 -#define NPORT_NOT_AVAIL_TMP 0x030000 -#define NPORT_NOT_AVAIL_PERM 0x040000 -#define CLASS_NOT_SUPPORTED 0x050000 -#define USAGE_ERROR 0x060000 -#define TYPE_NOT_SUPPORTED 0x070000 -#define INVAL_LINK_CONTROL 0x080000 -#define INVAL_R_CTL 0x090000 -#define INVAL_F_CTL 0x0A0000 -#define INVAL_OX_ID 0x0B0000 -#define INVAL_RX_ID 0x0C0000 -#define INVAL_SEQ_ID 0x0D0000 -#define INVAL_DF_CTL 0x0E0000 -#define INVAL_SEQ_CNT 0x0F0000 -#define INVAL_PARAMS 0x100000 -#define EXCHANGE_ERROR 0x110000 -#define LS_PROTOCOL_ERROR 0x120000 -#define INCORRECT_LENGTH 0x130000 -#define UNEXPECTED_ACK 0x140000 -#define LOGIN_REQ 0x160000 -#define EXCESSIVE_SEQ 0x170000 -#define NO_EXCHANGE 0x180000 -#define SEC_HDR_NOT_SUPPORTED 0x190000 -#define NO_FABRIC 0x1A0000 -#define P_VENDOR_UNIQUE 0xFF0000 - -// -// BA_RJT Reason Codes -// -#define BA_INVALID_COMMAND 0x00010000 -#define BA_LOGICAL_ERROR 0x00030000 -#define BA_LOGICAL_BUSY 0x00050000 -#define BA_PROTOCOL_ERROR 0x00070000 -#define BA_UNABLE_TO_PERFORM 0x00090000 - -// -// BA_RJT Reason Explanation Codes -// -#define BA_NO_REASON 0x00000000 -#define BA_INVALID_OX_RX 0x00000300 -#define BA_SEQUENCE_ABORTED 0x00000500 - - - -#endif /* CPQFCTSSTRUCTS_H */ - diff --git a/drivers/scsi/cpqfcTStrigger.c b/drivers/scsi/cpqfcTStrigger.c deleted file mode 100644 index dbb7e65159a..00000000000 --- a/drivers/scsi/cpqfcTStrigger.c +++ /dev/null @@ -1,33 +0,0 @@ -// Routine to trigger Finisar GTA analyzer. Runs of GPIO2 -// NOTE: DEBUG ONLY! Could interfere with FCMNGR/Miniport operation -// since it writes directly to the Tachyon board. This function -// developed for Compaq HBA Tachyon TS v1.2 (Rev X5 PCB) - -#include "cpqfcTStrigger.h" -#if TRIGGERABLE_HBA - -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/io.h> - -void TriggerHBA( void* IOBaseUpper, int Print) -{ - __u32 long value; - - // get initial value in hopes of not modifying any other GPIO line - IOBaseUpper += 0x188; // TachTL/TS Control reg - - value = readl( IOBaseUpper); - // set HIGH to trigger external analyzer (tested on Dolche Finisar 1Gb GTA) - // The Finisar anaylzer triggers on low-to-high TTL transition - value |= 0x01; // set bit 0 - - writel( value, IOBaseUpper); - - if( Print) - printk( " -GPIO0 set- "); -} - -#endif diff --git a/drivers/scsi/cpqfcTStrigger.h b/drivers/scsi/cpqfcTStrigger.h deleted file mode 100644 index c961792e6be..00000000000 --- a/drivers/scsi/cpqfcTStrigger.h +++ /dev/null @@ -1,8 +0,0 @@ -// don't do this unless you have the right hardware! -#define TRIGGERABLE_HBA 0 -#if TRIGGERABLE_HBA -void TriggerHBA( void*, int); -#else -#define TriggerHBA(x, y) -#endif - diff --git a/drivers/scsi/cpqfcTSworker.c b/drivers/scsi/cpqfcTSworker.c deleted file mode 100644 index d822ddcc52b..00000000000 --- a/drivers/scsi/cpqfcTSworker.c +++ /dev/null @@ -1,6516 +0,0 @@ -/* Copyright(c) 2000, Compaq Computer Corporation - * Fibre Channel Host Bus Adapter - * 64-bit, 66MHz PCI - * Originally developed and tested on: - * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... - * SP# P225CXCBFIEL6T, Rev XC - * SP# 161290-001, Rev XD - * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Written by Don Zimmerman -*/ - -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/stat.h> -#include <linux/blkdev.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/smp_lock.h> -#include <linux/pci.h> - -#define SHUTDOWN_SIGS (sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM)) - -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/dma.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> // struct Scsi_Host definition for T handler -#include "cpqfcTSchip.h" -#include "cpqfcTSstructs.h" -#include "cpqfcTStrigger.h" - -//#define LOGIN_DBG 1 - -// REMARKS: -// Since Tachyon chips may be permitted to wait from 500ms up to 2 sec -// to empty an outgoing frame from its FIFO to the Fibre Channel stream, -// we cannot do everything we need to in the interrupt handler. Specifically, -// every time a link re-init (e.g. LIP) takes place, all SCSI I/O has to be -// suspended until the login sequences have been completed. Login commands -// are frames just like SCSI commands are frames; they are subject to the same -// timeout issues and delays. Also, various specs provide up to 2 seconds for -// devices to log back in (i.e. respond with ACC to a login frame), so I/O to -// that device has to be suspended. -// A serious problem here occurs on highly loaded FC-AL systems. If our FC port -// has a low priority (e.g. high arbitrated loop physical address, alpa), and -// some other device is hogging bandwidth (permissible under FC-AL), we might -// time out thinking the link is hung, when it's simply busy. Many such -// considerations complicate the design. Although Tachyon assumes control -// (in silicon) for many link-specific issues, the Linux driver is left with the -// rest, which turns out to be a difficult, time critical chore. - -// These "worker" functions will handle things like FC Logins; all -// processes with I/O to our device must wait for the Login to complete -// and (if successful) I/O to resume. In the event of a malfunctioning or -// very busy loop, it may take hundreds of millisecs or even seconds to complete -// a frame send. We don't want to hang up the entire server (and all -// processes which don't depend on Fibre) during this wait. - -// The Tachyon chip can have around 30,000 I/O operations ("exchanges") -// open at one time. However, each exchange must be initiated -// synchronously (i.e. each of the 30k I/O had to be started one at a -// time by sending a starting frame via Tachyon's outbound que). - -// To accommodate kernel "module" build, this driver limits the exchanges -// to 256, because of the contiguous physical memory limitation of 128M. - -// Typical FC Exchanges are opened presuming the FC frames start without errors, -// while Exchange completion is handled in the interrupt handler. This -// optimizes performance for the "everything's working" case. -// However, when we have FC related errors or hot plugging of FC ports, we pause -// I/O and handle FC-specific tasks in the worker thread. These FC-specific -// functions will handle things like FC Logins and Aborts. As the Login sequence -// completes to each and every target, I/O can resume to that target. - -// Our kernel "worker thread" must share the HBA with threads calling -// "queuecommand". We define a "BoardLock" semaphore which indicates -// to "queuecommand" that the HBA is unavailable, and Cmnds are added to a -// board lock Q. When the worker thread finishes with the board, the board -// lock Q commands are completed with status causing immediate retry. -// Typically, the board is locked while Logins are in progress after an -// FC Link Down condition. When Cmnds are re-queued after board lock, the -// particular Scsi channel/target may or may not have logged back in. When -// the device is waiting for login, the "prli" flag is clear, in which case -// commands are passed to a Link Down Q. Whenever the login finally completes, -// the LinkDown Q is completed, again with status causing immediate retry. -// When FC devices are logged in, we build and start FC commands to the -// devices. - -// NOTE!! As of May 2000, kernel 2.2.14, the error recovery logic for devices -// that never log back in (e.g. physically removed) is NOT completely -// understood. I've still seen instances of system hangs on failed Write -// commands (possibly from the ext2 layer?) on device removal. Such special -// cases need to be evaluated from a system/application view - e.g., how -// exactly does the system want me to complete commands when the device is -// physically removed?? - -// local functions - -static void SetLoginFields( - PFC_LOGGEDIN_PORT pLoggedInPort, - TachFCHDR_GCMND* fchs, - BOOLEAN PDisc, - BOOLEAN Originator); - -static void AnalyzeIncomingFrame( - CPQFCHBA *cpqfcHBAdata, - ULONG QNdx ); - -static void SendLogins( CPQFCHBA *cpqfcHBAdata, __u32 *FabricPortIds ); - -static int verify_PLOGI( PTACHYON fcChip, - TachFCHDR_GCMND* fchs, ULONG* reject_explain); -static int verify_PRLI( TachFCHDR_GCMND* fchs, ULONG* reject_explain); - -static void LoadWWN( PTACHYON fcChip, UCHAR* dest, UCHAR type); -static void BuildLinkServicePayload( - PTACHYON fcChip, ULONG type, void* payload); - -static void UnblockScsiDevice( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort); - -static void cpqfcTSCheckandSnoopFCP( PTACHYON fcChip, ULONG x_ID); - -static void CompleteBoardLockCmnd( CPQFCHBA *cpqfcHBAdata); - -static void RevalidateSEST( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort); - -static void IssueReportLunsCommand( - CPQFCHBA* cpqfcHBAdata, - TachFCHDR_GCMND* fchs); - -// (see scsi_error.c comments on kernel task creation) - -void cpqfcTSWorkerThread( void *host) -{ - struct Scsi_Host *HostAdapter = (struct Scsi_Host*)host; - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; -#ifdef PCI_KERNEL_TRACE - PTACHYON fcChip = &cpqfcHBAdata->fcChip; -#endif - DECLARE_MUTEX_LOCKED(fcQueReady); - DECLARE_MUTEX_LOCKED(fcTYOBcomplete); - DECLARE_MUTEX_LOCKED(TachFrozen); - DECLARE_MUTEX_LOCKED(BoardLock); - - ENTER("WorkerThread"); - - lock_kernel(); - daemonize("cpqfcTS_wt_%d", HostAdapter->host_no); - siginitsetinv(¤t->blocked, SHUTDOWN_SIGS); - - - cpqfcHBAdata->fcQueReady = &fcQueReady; // primary wait point - cpqfcHBAdata->TYOBcomplete = &fcTYOBcomplete; - cpqfcHBAdata->TachFrozen = &TachFrozen; - - - cpqfcHBAdata->worker_thread = current; - - unlock_kernel(); - - if( cpqfcHBAdata->notify_wt != NULL ) - up( cpqfcHBAdata->notify_wt); // OK to continue - - while(1) - { - unsigned long flags; - - down_interruptible( &fcQueReady); // wait for something to do - - if (signal_pending(current) ) - break; - - PCI_TRACE( 0x90) - // first, take the IO lock so the SCSI upper layers can't call - // into our _quecommand function (this also disables INTs) - spin_lock_irqsave( HostAdapter->host_lock, flags); // STOP _que function - PCI_TRACE( 0x90) - - CPQ_SPINLOCK_HBA( cpqfcHBAdata) - // next, set this pointer to indicate to the _quecommand function - // that the board is in use, so it should que the command and - // immediately return (we don't actually require the semaphore function - // in this driver rev) - - cpqfcHBAdata->BoardLock = &BoardLock; - - PCI_TRACE( 0x90) - - // release the IO lock (and re-enable interrupts) - spin_unlock_irqrestore( HostAdapter->host_lock, flags); - - // disable OUR HBA interrupt (keep them off as much as possible - // during error recovery) - disable_irq( cpqfcHBAdata->HostAdapter->irq); - - // OK, let's process the Fibre Channel Link Q and do the work - cpqfcTS_WorkTask( HostAdapter); - - // hopefully, no more "work" to do; - // re-enable our INTs for "normal" completion processing - enable_irq( cpqfcHBAdata->HostAdapter->irq); - - - cpqfcHBAdata->BoardLock = NULL; // allow commands to be queued - CPQ_SPINUNLOCK_HBA( cpqfcHBAdata) - - - // Now, complete any Cmnd we Q'd up while BoardLock was held - - CompleteBoardLockCmnd( cpqfcHBAdata); - - - } - // hopefully, the signal was for our module exit... - if( cpqfcHBAdata->notify_wt != NULL ) - up( cpqfcHBAdata->notify_wt); // yep, we're outta here -} - - -// Freeze Tachyon routine. -// If Tachyon is already frozen, return FALSE -// If Tachyon is not frozen, call freeze function, return TRUE -// -static BOOLEAN FreezeTach( CPQFCHBA *cpqfcHBAdata) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - BOOLEAN FrozeTach = FALSE; - // It's possible that the chip is already frozen; if so, - // "Freezing" again will NOT! generate another Freeze - // Completion Message. - - if( (fcChip->Registers.TYstatus.value & 0x70000) != 0x70000) - { // (need to freeze...) - fcChip->FreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - // 2. Get Tach freeze confirmation - // (synchronize SEST manipulation with Freeze Completion Message) - // we need INTs on so semaphore can be set. - enable_irq( cpqfcHBAdata->HostAdapter->irq); // only way to get Semaphore - down_interruptible( cpqfcHBAdata->TachFrozen); // wait for INT handler sem. - // can we TIMEOUT semaphore wait?? TBD - disable_irq( cpqfcHBAdata->HostAdapter->irq); - - FrozeTach = TRUE; - } // (else, already frozen) - - return FrozeTach; -} - - - - -// This is the kernel worker thread task, which processes FC -// tasks which were queued by the Interrupt handler or by -// other WorkTask functions. - -#define DBG 1 -//#undef DBG -void cpqfcTS_WorkTask( struct Scsi_Host *HostAdapter) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG QconsumerNdx; - LONG ExchangeID; - ULONG ulStatus=0; - TachFCHDR_GCMND fchs; - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - - ENTER("WorkTask"); - - // copy current index to work on - QconsumerNdx = fcLQ->consumer; - - PCI_TRACEO( fcLQ->Qitem[QconsumerNdx].Type, 0x90) - - - // NOTE: when this switch completes, we will "consume" the Que item -// printk("Que type %Xh\n", fcLQ->Qitem[QconsumerNdx].Type); - switch( fcLQ->Qitem[QconsumerNdx].Type ) - { - // incoming frame - link service (ACC, UNSOL REQ, etc.) - // or FCP-SCSI command - case SFQ_UNKNOWN: - AnalyzeIncomingFrame( cpqfcHBAdata, QconsumerNdx ); - - break; - - - - case EXCHANGE_QUEUED: // an Exchange (i.e. FCP-SCSI) was previously - // Queued because the link was down. The - // heartbeat timer detected it and Queued it here. - // We attempt to start it again, and if - // successful we clear the EXCHANGE_Q flag. - // If the link doesn't come up, the Exchange - // will eventually time-out. - - ExchangeID = (LONG) // x_ID copied from DPC timeout function - fcLQ->Qitem[QconsumerNdx].ulBuff[0]; - - // It's possible that a Q'd exchange could have already - // been started by other logic (e.g. ABTS process) - // Don't start if already started (Q'd flag clear) - - if( Exchanges->fcExchange[ExchangeID].status & EXCHANGE_QUEUED ) - { -// printk(" *Start Q'd x_ID %Xh: type %Xh ", -// ExchangeID, Exchanges->fcExchange[ExchangeID].type); - - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID); - if( !ulStatus ) - { -// printk("success* "); - } - else - { -#ifdef DBG - - if( ulStatus == EXCHANGE_QUEUED) - printk("Queued* "); - else - printk("failed* "); - -#endif - } - } - break; - - - case LINKDOWN: - // (lots of things already done in INT handler) future here? - break; - - - case LINKACTIVE: // Tachyon set the Lup bit in FM status - // NOTE: some misbehaving FC ports (like Tach2.1) - // can re-LIP immediately after a LIP completes. - - // if "initiator", need to verify LOGs with ports -// printk("\n*LNKUP* "); - - if( fcChip->Options.initiator ) - SendLogins( cpqfcHBAdata, NULL ); // PLOGI or PDISC, based on fcPort data - // if SendLogins successfully completes, PortDiscDone - // will be set. - - - // If SendLogins was successful, then we expect to get incoming - // ACCepts or REJECTs, which are handled below. - - break; - - // LinkService and Fabric request/reply processing - case ELS_FDISC: // need to send Fabric Discovery (Login) - case ELS_FLOGI: // need to send Fabric Login - case ELS_SCR: // need to send State Change Registration - case FCS_NSR: // need to send Name Service Request - case ELS_PLOGI: // need to send PLOGI - case ELS_ACC: // send generic ACCept - case ELS_PLOGI_ACC: // need to send ELS ACCept frame to recv'd PLOGI - case ELS_PRLI_ACC: // need to send ELS ACCept frame to recv'd PRLI - case ELS_LOGO: // need to send ELS LOGO (logout) - case ELS_LOGO_ACC: // need to send ELS ACCept frame to recv'd PLOGI - case ELS_RJT: // ReJecT reply - case ELS_PRLI: // need to send ELS PRLI - - -// printk(" *ELS %Xh* ", fcLQ->Qitem[QconsumerNdx].Type); - // if PortDiscDone is not set, it means the SendLogins routine - // failed to complete -- assume that LDn occurred, so login frames - // are invalid - if( !cpqfcHBAdata->PortDiscDone) // cleared by LDn - { - printk("Discard Q'd ELS login frame\n"); - break; - } - - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - fcLQ->Qitem[QconsumerNdx].Type, // e.g. PLOGI - (TachFCHDR_GCMND*) - fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - } - else - // check reason for Exchange not being started - we might - // want to Queue and start later, or fail with error - { - - } - } - - else // Xchange setup failed... - printk(" cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); - - break; - - case SCSI_REPORT_LUNS: - // pass the incoming frame (actually, it's a PRLI frame) - // so we can send REPORT_LUNS, in order to determine VSA/PDU - // FCP-SCSI Lun address mode - IssueReportLunsCommand( cpqfcHBAdata, (TachFCHDR_GCMND*) - fcLQ->Qitem[QconsumerNdx].ulBuff); - - break; - - - - - case BLS_ABTS: // need to ABORT one or more exchanges - { - LONG x_ID = fcLQ->Qitem[QconsumerNdx].ulBuff[0]; - BOOLEAN FrozeTach = FALSE; - - if ( x_ID >= TACH_SEST_LEN ) // (in)sanity check - { -// printk( " cpqfcTS ERROR! BOGUS x_ID %Xh", x_ID); - break; - } - - - if( Exchanges->fcExchange[ x_ID].Cmnd == NULL ) // should be RARE - { -// printk(" ABTS %Xh Scsi Cmnd null! ", x_ID); - - break; // nothing to abort! - } - -//#define ABTS_DBG -#ifdef ABTS_DBG - printk("INV SEST[%X] ", x_ID); - if( Exchanges->fcExchange[x_ID].status & FC2_TIMEOUT) - { - printk("FC2TO"); - } - if( Exchanges->fcExchange[x_ID].status & INITIATOR_ABORT) - { - printk("IA"); - } - if( Exchanges->fcExchange[x_ID].status & PORTID_CHANGED) - { - printk("PORTID"); - } - if( Exchanges->fcExchange[x_ID].status & DEVICE_REMOVED) - { - printk("DEVRM"); - } - if( Exchanges->fcExchange[x_ID].status & LINKFAIL_TX) - { - printk("LKF"); - } - if( Exchanges->fcExchange[x_ID].status & FRAME_TO) - { - printk("FRMTO"); - } - if( Exchanges->fcExchange[x_ID].status & ABORTSEQ_NOTIFY) - { - printk("ABSQ"); - } - if( Exchanges->fcExchange[x_ID].status & SFQ_FRAME) - { - printk("SFQFR"); - } - - if( Exchanges->fcExchange[ x_ID].type == 0x2000) - printk(" WR"); - else if( Exchanges->fcExchange[ x_ID].type == 0x3000) - printk(" RD"); - else if( Exchanges->fcExchange[ x_ID].type == 0x10) - printk(" ABTS"); - else - printk(" %Xh", Exchanges->fcExchange[ x_ID].type); - - if( !(Exchanges->fcExchange[x_ID].status & INITIATOR_ABORT)) - { - printk(" Cmd %p, ", - Exchanges->fcExchange[ x_ID].Cmnd); - - printk(" brd/chn/trg/lun %d/%d/%d/%d port_id %06X\n", - cpqfcHBAdata->HBAnum, - Exchanges->fcExchange[ x_ID].Cmnd->channel, - Exchanges->fcExchange[ x_ID].Cmnd->target, - Exchanges->fcExchange[ x_ID].Cmnd->lun, - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF); - } - else // assume that Cmnd ptr is invalid on _abort() - { - printk(" Cmd ptr invalid\n"); - } - -#endif - - - // Steps to ABORT a SEST exchange: - // 1. Freeze TL SCSI assists & ERQ (everything) - // 2. Receive FROZEN inbound CM (must succeed!) - // 3. Invalidate x_ID SEST entry - // 4. Resume TL SCSI assists & ERQ (everything) - // 5. Build/start on exchange - change "type" to BLS_ABTS, - // timeout to X sec (RA_TOV from PLDA is actually 0) - // 6. Set Exchange Q'd status if ABTS cannot be started, - // or simply complete Exchange in "Terminate" condition - - PCI_TRACEO( x_ID, 0xB4) - - // 1 & 2 . Freeze Tach & get confirmation of freeze - FrozeTach = FreezeTach( cpqfcHBAdata); - - // 3. OK, Tachyon is frozen, so we can invalidate SEST exchange. - // FC2_TIMEOUT means we are originating the abort, while - // TARGET_ABORT means we are ACCepting an abort. - // LINKFAIL_TX, ABORTSEQ_NOFITY, INV_ENTRY or FRAME_TO are - // all from Tachyon: - // Exchange was corrupted by LDn or other FC physical failure - // INITIATOR_ABORT means the upper layer driver/application - // requested the abort. - - - - // clear bit 31 (VALid), to invalidate & take control from TL - fcChip->SEST->u[ x_ID].IWE.Hdr_Len &= 0x7FFFFFFF; - - - // examine and Tach's "Linked List" for IWEs that - // received (nearly) simultaneous transfer ready (XRDY) - // repair linked list if necessary (TBD!) - // (If we ignore the "Linked List", we will time out - // WRITE commands where we received the FCP-SCSI XFRDY - // frame (because Tachyon didn't processes it). Linked List - // management should be done as an optimization. - -// readl( fcChip->Registers.ReMapMemBase+TL_MEM_SEST_LINKED_LIST )); - - - - - // 4. Resume all Tachlite functions (for other open Exchanges) - // as quickly as possible to allow other exchanges to other ports - // to resume. Freezing Tachyon may cause cascading errors, because - // any received SEST frame cannot be processed by the SEST. - // Don't "unfreeze" unless Link is operational - if( FrozeTach ) // did we just freeze it (above)? - fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - - PCI_TRACEO( x_ID, 0xB4) - - // Note there is no confirmation that the chip is "unfrozen". Also, - // if the Link is down when unfreeze is called, it has no effect. - // Chip will unfreeze when the Link is back up. - - // 5. Now send out Abort commands if possible - // Some Aborts can't be "sent" (Port_id changed or gone); - // if the device is gone, there is no port_id to send the ABTS to. - - if( !(Exchanges->fcExchange[ x_ID].status & PORTID_CHANGED) - && - !(Exchanges->fcExchange[ x_ID].status & DEVICE_REMOVED) ) - { - Exchanges->fcExchange[ x_ID].type = BLS_ABTS; - fchs.s_id = Exchanges->fcExchange[ x_ID].fchs.d_id; - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - BLS_ABTS, - &fchs, // (uses only s_id) - NULL, // (no scatter/gather list for ABTS) - &x_ID );// ABTS on this Exchange ID - - if( !ulStatus ) // Exchange setup build OK? - { - - // ABTS may be needed because an Exchange was corrupted - // by a Link disruption. If the Link is UP, we can - // presume that this ABTS can start immediately; otherwise, - // set Que'd status so the Login functions - // can restart it when the FC physical Link is restored - if( ((fcChip->Registers.FMstatus.value &0xF0) &0x80)) // loop init? - { -// printk(" *set Q status x_ID %Xh on LDn* ", x_ID); - Exchanges->fcExchange[ x_ID].status |= EXCHANGE_QUEUED; - } - - else // what FC device (port_id) does the Cmd belong to? - { - PFC_LOGGEDIN_PORT pLoggedInPort = - Exchanges->fcExchange[ x_ID].pLoggedInPort; - - // if Port is logged in, we might start the abort. - - if( (pLoggedInPort != NULL) - && - (pLoggedInPort->prli == TRUE) ) - { - // it's possible that an Exchange has already been Queued - // to start after Login completes. Check and don't - // start it (again) here if Q'd status set -// printk(" ABTS xchg %Xh ", x_ID); - if( Exchanges->fcExchange[x_ID].status & EXCHANGE_QUEUED) - { -// printk("already Q'd "); - } - else - { -// printk("starting "); - - fcChip->fcStats.FC2aborted++; - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, x_ID ); - if( !ulStatus ) - { - // OK - // submitted to Tach's Outbound Que (ERQ PI incremented) - } - else - { -/* printk("ABTS exchange start failed -status %Xh, x_ID %Xh ", - ulStatus, x_ID); -*/ - } - } - } - else - { -/* printk(" ABTS NOT starting xchg %Xh, %p ", - x_ID, pLoggedInPort); - if( pLoggedInPort ) - printk("prli %d ", pLoggedInPort->prli); -*/ - } - } - } - else // what the #@! - { // how do we fail to build an Exchange for ABTS?? - printk("ABTS exchange build failed -status %Xh, x_ID %Xh\n", - ulStatus, x_ID); - } - } - else // abort without ABTS -- just complete exchange/Cmnd to Linux - { -// printk(" *Terminating x_ID %Xh on %Xh* ", -// x_ID, Exchanges->fcExchange[x_ID].status); - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, x_ID); - - } - } // end of ABTS case - break; - - - - case BLS_ABTS_ACC: // need to ACCept one ABTS - // (NOTE! this code not updated for Linux yet..) - - - printk(" *ABTS_ACC* "); - // 1. Freeze TL - - fcChip->FreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - memcpy( // copy the incoming ABTS frame - &fchs, - fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs - sizeof( fchs)); - - // 3. OK, Tachyon is frozen so we can invalidate SEST entry - // (if necessary) - // Status FC2_TIMEOUT means we are originating the abort, while - // TARGET_ABORT means we are ACCepting an abort - - ExchangeID = fchs.ox_rx_id & 0x7FFF; // RX_ID for exchange -// printk("ABTS ACC for Target ExchangeID %Xh\n", ExchangeID); - - - // sanity check on received ExchangeID - if( Exchanges->fcExchange[ ExchangeID].status == TARGET_ABORT ) - { - // clear bit 31 (VALid), to invalidate & take control from TL -// printk("Invalidating SEST exchange %Xh\n", ExchangeID); - fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len &= 0x7FFFFFFF; - } - - - // 4. Resume all Tachlite functions (for other open Exchanges) - // as quickly as possible to allow other exchanges to other ports - // to resume. Freezing Tachyon for too long may royally screw - // up everything! - fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - // Note there is no confirmation that the chip is "unfrozen". Also, - // if the Link is down when unfreeze is called, it has no effect. - // Chip will unfreeze when the Link is back up. - - // 5. Now send out Abort ACC reply for this exchange - Exchanges->fcExchange[ ExchangeID].type = BLS_ABTS_ACC; - - fchs.s_id = Exchanges->fcExchange[ ExchangeID].fchs.d_id; - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - BLS_ABTS_ACC, - &fchs, - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - } - else - // check reason for Exchange not being started - we might - // want to Queue and start later, or fail with error - { - - } - } - break; - - - case BLS_ABTS_RJT: // need to ReJecT one ABTS; reject implies the - // exchange doesn't exist in the TARGET context. - // ExchangeID has to come from LinkService space. - - printk(" *ABTS_RJT* "); - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - BLS_ABTS_RJT, - (TachFCHDR_GCMND*) - fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup OK? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - // If it fails, we aren't required to retry. - } - if( ulStatus ) - { - printk("Failed to send BLS_RJT for ABTS, X_ID %Xh\n", ExchangeID); - } - else - { - printk("Sent BLS_RJT for ABTS, X_ID %Xh\n", ExchangeID); - - } - - break; - - - - default: - break; - } // end switch -//doNothing: - // done with this item - now set the NEXT index - - if( QconsumerNdx+1 >= FC_LINKQ_DEPTH ) // rollover test - { - fcLQ->consumer = 0; - } - else - { - fcLQ->consumer++; - } - - PCI_TRACEO( fcLQ->Qitem[QconsumerNdx].Type, 0x94) - - LEAVE("WorkTask"); - return; -} - - - - -// When Tachyon reports link down, bad al_pa, or Link Service (e.g. Login) -// commands come in, post to the LinkQ so that action can be taken outside the -// interrupt handler. -// This circular Q works like Tachyon's que - the producer points to the next -// (unused) entry. Called by Interrupt handler, WorkerThread, Timer -// sputlinkq -void cpqfcTSPutLinkQue( CPQFCHBA *cpqfcHBAdata, - int Type, - void *QueContent) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; -// FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - ULONG ndx; - - ENTER("cpqfcTSPutLinkQ"); - - ndx = fcLQ->producer; - - ndx += 1; // test for Que full - - - - if( ndx >= FC_LINKQ_DEPTH ) // rollover test - ndx = 0; - - if( ndx == fcLQ->consumer ) // QUE full test - { - // QUE was full! lost LK command (fatal to logic) - fcChip->fcStats.lnkQueFull++; - - printk("*LinkQ Full!*"); - TriggerHBA( fcChip->Registers.ReMapMemBase, 1); -/* - { - int i; - printk("LinkQ PI %d, CI %d\n", fcLQ->producer, - fcLQ->consumer); - - for( i=0; i< FC_LINKQ_DEPTH; ) - { - printk(" [%d]%Xh ", i, fcLQ->Qitem[i].Type); - if( (++i %8) == 0) printk("\n"); - } - - } -*/ - printk( "cpqfcTS: WARNING!! PutLinkQue - FULL!\n"); // we're hung - } - else // QUE next element - { - // Prevent certain multiple (back-to-back) requests. - // This is important in that we don't want to issue multiple - // ABTS for the same Exchange, or do multiple FM inits, etc. - // We can never be sure of the timing of events reported to - // us by Tach's IMQ, which can depend on system/bus speeds, - // FC physical link circumstances, etc. - - if( (fcLQ->producer != fcLQ->consumer) - && - (Type == FMINIT) ) - { - LONG lastNdx; // compute previous producer index - if( fcLQ->producer) - lastNdx = fcLQ->producer- 1; - else - lastNdx = FC_LINKQ_DEPTH-1; - - - if( fcLQ->Qitem[lastNdx].Type == FMINIT) - { -// printk(" *skip FMINIT Q post* "); -// goto DoneWithPutQ; - } - - } - - // OK, add the Q'd item... - - fcLQ->Qitem[fcLQ->producer].Type = Type; - - memcpy( - fcLQ->Qitem[fcLQ->producer].ulBuff, - QueContent, - sizeof(fcLQ->Qitem[fcLQ->producer].ulBuff)); - - fcLQ->producer = ndx; // increment Que producer - - // set semaphore to wake up Kernel (worker) thread - // - up( cpqfcHBAdata->fcQueReady ); - } - -//DoneWithPutQ: - - LEAVE("cpqfcTSPutLinkQ"); -} - - - - -// reset device ext FC link Q -void cpqfcTSLinkQReset( CPQFCHBA *cpqfcHBAdata) - -{ - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - fcLQ->producer = 0; - fcLQ->consumer = 0; - -} - - - - - -// When Tachyon gets an unassisted FCP-SCSI frame, post here so -// an arbitrary context thread (e.g. IOCTL loopback test function) -// can process it. - -// (NOTE: Not revised for Linux) -// This Q works like Tachyon's que - the producer points to the next -// (unused) entry. -void cpqfcTSPutScsiQue( CPQFCHBA *cpqfcHBAdata, - int Type, - void *QueContent) -{ -// CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; -// PTACHYON fcChip = &cpqfcHBAdata->fcChip; - -// ULONG ndx; - -// ULONG *pExchangeID; -// LONG ExchangeID; - -/* - KeAcquireSpinLockAtDpcLevel( &pDevExt->fcScsiQueLock); - ndx = pDevExt->fcScsiQue.producer + 1; // test for Que full - - if( ndx >= FC_SCSIQ_DEPTH ) // rollover test - ndx = 0; - - if( ndx == pDevExt->fcScsiQue.consumer ) // QUE full test - { - // QUE was full! lost LK command (fatal to logic) - fcChip->fcStats.ScsiQueFull++; -#ifdef DBG - printk( "fcPutScsiQue - FULL!\n"); -#endif - - } - else // QUE next element - { - pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].Type = Type; - - if( Type == FCP_RSP ) - { - // this TL inbound message type means that a TL SEST exchange has - // copied an FCP response frame into a buffer pointed to by the SEST - // entry. That buffer is allocated in the SEST structure at ->RspHDR. - // Copy the RspHDR for use by the Que handler. - pExchangeID = (ULONG *)QueContent; - - memcpy( - pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff, - &fcChip->SEST->RspHDR[ *pExchangeID ], - sizeof(pDevExt->fcScsiQue.Qitem[0].ulBuff)); // (any element for size) - - } - else - { - memcpy( - pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff, - QueContent, - sizeof(pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff)); - } - - pDevExt->fcScsiQue.producer = ndx; // increment Que - - - KeSetEvent( &pDevExt->TYIBscsi, // signal any waiting thread - 0, // no priority boost - FALSE ); // no waiting later for this event - } - KeReleaseSpinLockFromDpcLevel( &pDevExt->fcScsiQueLock); -*/ -} - - - - - - - -static void ProcessELS_Request( CPQFCHBA*,TachFCHDR_GCMND*); - -static void ProcessELS_Reply( CPQFCHBA*,TachFCHDR_GCMND*); - -static void ProcessFCS_Reply( CPQFCHBA*,TachFCHDR_GCMND*); - -void cpqfcTSImplicitLogout( CPQFCHBA* cpqfcHBAdata, - PFC_LOGGEDIN_PORT pFcPort) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - - if( pFcPort->port_id != 0xFFFC01 ) // don't care about Fabric - { - fcChip->fcStats.logouts++; - printk("cpqfcTS: Implicit logout of WWN %08X%08X, port_id %06X\n", - (ULONG)pFcPort->u.liWWN, - (ULONG)(pFcPort->u.liWWN >>32), - pFcPort->port_id); - - // Terminate I/O with this (Linux) Scsi target - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pFcPort->ScsiNexus, - DEVICE_REMOVED); - } - - // Do an "implicit logout" - we can't really Logout the device - // (i.e. with LOGOut Request) because of port_id confusion - // (i.e. the Other port has no port_id). - // A new login for that WWN will have to re-write port_id (0 invalid) - pFcPort->port_id = 0; // invalid! - pFcPort->pdisc = FALSE; - pFcPort->prli = FALSE; - pFcPort->plogi = FALSE; - pFcPort->flogi = FALSE; - pFcPort->LOGO_timer = 0; - pFcPort->device_blocked = TRUE; // block Scsi Requests - pFcPort->ScsiNexus.VolumeSetAddressing=0; -} - - -// On FC-AL, there is a chance that a previously known device can -// be quietly removed (e.g. with non-managed hub), -// while a NEW device (with different WWN) took the same alpa or -// even 24-bit port_id. This chance is unlikely but we must always -// check for it. -static void TestDuplicatePortId( CPQFCHBA* cpqfcHBAdata, - PFC_LOGGEDIN_PORT pLoggedInPort) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - // set "other port" at beginning of fcPorts list - PFC_LOGGEDIN_PORT pOtherPortWithPortId = fcChip->fcPorts.pNextPort; - while( pOtherPortWithPortId ) - { - if( (pOtherPortWithPortId->port_id == - pLoggedInPort->port_id) - && - (pOtherPortWithPortId != pLoggedInPort) ) - { - // trouble! (Implicitly) Log the other guy out - printk(" *port_id %Xh is duplicated!* ", - pOtherPortWithPortId->port_id); - cpqfcTSImplicitLogout( cpqfcHBAdata, pOtherPortWithPortId); - } - pOtherPortWithPortId = pOtherPortWithPortId->pNextPort; - } -} - - - - - - -// Dynamic Memory Allocation for newly discovered FC Ports. -// For simplicity, maintain fcPorts structs for ALL -// for discovered devices, including those we never do I/O with -// (e.g. Fabric addresses) - -static PFC_LOGGEDIN_PORT CreateFcPort( - CPQFCHBA* cpqfcHBAdata, - PFC_LOGGEDIN_PORT pLastLoggedInPort, - TachFCHDR_GCMND* fchs, - LOGIN_PAYLOAD* plogi) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - PFC_LOGGEDIN_PORT pNextLoggedInPort = NULL; - int i; - - - printk("cpqfcTS: New FC port %06Xh WWN: ", fchs->s_id); - for( i=3; i>=0; i--) // copy the LOGIN port's WWN - printk("%02X", plogi->port_name[i]); - for( i=7; i>3; i--) // copy the LOGIN port's WWN - printk("%02X", plogi->port_name[i]); - - - // allocate mem for new port - // (these are small and rare allocations...) - pNextLoggedInPort = kmalloc( sizeof( FC_LOGGEDIN_PORT), GFP_ATOMIC ); - - - // allocation succeeded? Fill out NEW PORT - if( pNextLoggedInPort ) - { - // clear out any garbage (sometimes exists) - memset( pNextLoggedInPort, 0, sizeof( FC_LOGGEDIN_PORT)); - - - // If we login to a Fabric, we don't want to treat it - // as a SCSI device... - if( (fchs->s_id & 0xFFF000) != 0xFFF000) - { - int i; - - // create a unique "virtual" SCSI Nexus (for now, just a - // new target ID) -- we will update channel/target on REPORT_LUNS - // special case for very first SCSI target... - if( cpqfcHBAdata->HostAdapter->max_id == 0) - { - pNextLoggedInPort->ScsiNexus.target = 0; - fcChip->fcPorts.ScsiNexus.target = -1; // don't use "stub" - } - else - { - pNextLoggedInPort->ScsiNexus.target = - cpqfcHBAdata->HostAdapter->max_id; - } - - // initialize the lun[] Nexus struct for lun masking - for( i=0; i< CPQFCTS_MAX_LUN; i++) - pNextLoggedInPort->ScsiNexus.lun[i] = 0xFF; // init to NOT USED - - pNextLoggedInPort->ScsiNexus.channel = 0; // cpqfcTS has 1 FC port - - printk(" SCSI Chan/Trgt %d/%d", - pNextLoggedInPort->ScsiNexus.channel, - pNextLoggedInPort->ScsiNexus.target); - - // tell Scsi layers about the new target... - cpqfcHBAdata->HostAdapter->max_id++; -// printk("HostAdapter->max_id = %d\n", -// cpqfcHBAdata->HostAdapter->max_id); - } - else - { - // device is NOT SCSI (in case of Fabric) - pNextLoggedInPort->ScsiNexus.target = -1; // invalid - } - - // create forward link to new port - pLastLoggedInPort->pNextPort = pNextLoggedInPort; - printk("\n"); - - } - return pNextLoggedInPort; // NULL on allocation failure -} // end NEW PORT (WWN) logic - - - -// For certain cases, we want to terminate exchanges without -// sending ABTS to the device. Examples include when an FC -// device changed it's port_id after Loop re-init, or when -// the device sent us a logout. In the case of changed port_id, -// we want to complete the command and return SOFT_ERROR to -// force a re-try. In the case of LOGOut, we might return -// BAD_TARGET if the device is really gone. -// Since we must ensure that Tachyon is not operating on the -// exchange, we have to freeze the chip -// sterminateex -void cpqfcTSTerminateExchange( - CPQFCHBA* cpqfcHBAdata, SCSI_NEXUS *ScsiNexus, int TerminateStatus) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG x_ID; - - if( ScsiNexus ) - { -// printk("TerminateExchange: ScsiNexus chan/target %d/%d\n", -// ScsiNexus->channel, ScsiNexus->target); - - } - - for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) - { - if( Exchanges->fcExchange[x_ID].type ) // in use? - { - if( ScsiNexus == NULL ) // our HBA changed - term. all - { - Exchanges->fcExchange[x_ID].status = TerminateStatus; - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID ); - } - else - { - // If a device, according to WWN, has been removed, it's - // port_id may be used by another working device, so we - // have to terminate by SCSI target, NOT port_id. - if( Exchanges->fcExchange[x_ID].Cmnd) // Cmnd in progress? - { - if( (Exchanges->fcExchange[x_ID].Cmnd->device->id == ScsiNexus->target) - && - (Exchanges->fcExchange[x_ID].Cmnd->device->channel == ScsiNexus->channel)) - { - Exchanges->fcExchange[x_ID].status = TerminateStatus; - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID ); // timed-out - } - } - - // (in case we ever need it...) - // all SEST structures have a remote node ID at SEST DWORD 2 - // if( (fcChip->SEST->u[ x_ID ].TWE.Remote_Node_ID >> 8) - // == port_id) - } - } - } -} - - -static void ProcessELS_Request( - CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; -// FC_EXCHANGES *Exchanges = fcChip->Exchanges; -// ULONG ox_id = (fchs->ox_rx_id >>16); - PFC_LOGGEDIN_PORT pLoggedInPort=NULL, pLastLoggedInPort; - BOOLEAN NeedReject = FALSE; - ULONG ls_reject_code = 0; // default don'n know?? - - - // Check the incoming frame for a supported ELS type - switch( fchs->pl[0] & 0xFFFF) - { - case 0x0050: // PDISC? - - // Payload for PLOGI and PDISC is identical (request & reply) - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) // valid payload? - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - - // PDISC payload OK. If critical login fields - // (e.g. WWN) matches last login for this port_id, - // we may resume any prior exchanges - // with the other port - - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort != NULL) // WWN found (prior login OK) - { - - if( (fchs->s_id & 0xFFFFFF) == pLoggedInPort->port_id) - { - // Yes. We were expecting PDISC? - if( pLoggedInPort->pdisc ) - { - // Yes; set fields accordingly. (PDISC, not Originator) - SetLoginFields( pLoggedInPort, fchs, TRUE, FALSE); - - // send 'ACC' reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PLOGI_ACC, // (PDISC same as PLOGI ACC) - fchs ); - - // OK to resume I/O... - } - else - { - printk("Not expecting PDISC (pdisc=FALSE)\n"); - NeedReject = TRUE; - // set reject reason code - ls_reject_code = - LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - } - } - else - { - if( pLoggedInPort->port_id != 0) - { - printk("PDISC PortID change: old %Xh, new %Xh\n", - pLoggedInPort->port_id, fchs->s_id &0xFFFFFF); - } - NeedReject = TRUE; - // set reject reason code - ls_reject_code = - LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - - } - } - else - { - printk("PDISC Request from unknown WWN\n"); - NeedReject = TRUE; - - // set reject reason code - ls_reject_code = - LS_RJT_REASON( LOGICAL_ERROR, INVALID_PORT_NAME); - } - - } - else // Payload unacceptable - { - printk("payload unacceptable\n"); - NeedReject = TRUE; // reject code already set - - } - - if( NeedReject) - { - ULONG port_id; - // The PDISC failed. Set login struct flags accordingly, - // terminate any I/O to this port, and Q a PLOGI - if( pLoggedInPort ) - { - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; - pLoggedInPort->plogi = FALSE; - - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - port_id = pLoggedInPort->port_id; - } - else - { - port_id = fchs->s_id &0xFFFFFF; - } - fchs->reserved = ls_reject_code; // borrow this (unused) field - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_RJT, fchs ); - } - - break; - - - - case 0x0003: // PLOGI? - - // Payload for PLOGI and PDISC is identical (request & reply) - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) // valid payload? - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - BOOLEAN NeedReject = FALSE; - - // PDISC payload OK. If critical login fields - // (e.g. WWN) matches last login for this port_id, - // we may resume any prior exchanges - // with the other port - - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort == NULL) // WWN not found -New Port - { - pLoggedInPort = CreateFcPort( - cpqfcHBAdata, - pLastLoggedInPort, - fchs, - &logi); - if( pLoggedInPort == NULL ) - { - printk(" cpqfcTS: New port allocation failed - lost FC device!\n"); - // Now Q a LOGOut Request, since we won't be talking to that device - - NeedReject = TRUE; - - // set reject reason code - ls_reject_code = - LS_RJT_REASON( LOGICAL_ERROR, NO_LOGIN_RESOURCES); - - } - } - if( !NeedReject ) - { - - // OK - we have valid fcPort ptr; set fields accordingly. - // (not PDISC, not Originator) - SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); - - // send 'ACC' reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PLOGI_ACC, // (PDISC same as PLOGI ACC) - fchs ); - } - } - else // Payload unacceptable - { - printk("payload unacceptable\n"); - NeedReject = TRUE; // reject code already set - } - - if( NeedReject) - { - // The PDISC failed. Set login struct flags accordingly, - // terminate any I/O to this port, and Q a PLOGI - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; - pLoggedInPort->plogi = FALSE; - - fchs->reserved = ls_reject_code; // borrow this (unused) field - - // send 'RJT' reply - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_RJT, fchs ); - } - - // terminate any exchanges with this device... - if( pLoggedInPort ) - { - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - } - break; - - - - case 0x1020: // PRLI? - { - BOOLEAN NeedReject = TRUE; - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - (fchs->s_id & 0xFFFFFF), // search linked list for port_id - NULL, // DON'T search linked list for WWN - NULL); // don't care - - if( pLoggedInPort == NULL ) - { - // huh? - printk(" Unexpected PRLI Request -not logged in!\n"); - - // set reject reason code - ls_reject_code = LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - - // Q a LOGOut here? - } - else - { - // verify the PRLI ACC payload - if( !verify_PRLI( fchs, &ls_reject_code) ) - { - // PRLI Reply is acceptable; were we expecting it? - if( pLoggedInPort->plogi ) - { - // yes, we expected the PRLI ACC (not PDISC; not Originator) - SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); - - // Q an ACCept Reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PRLI_ACC, - fchs ); - - NeedReject = FALSE; - } - else - { - // huh? - printk(" (unexpected) PRLI REQEST with plogi FALSE\n"); - - // set reject reason code - ls_reject_code = LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - - // Q a LOGOut here? - - } - } - else - { - printk(" PRLI REQUEST payload failed verify\n"); - // (reject code set by "verify") - - // Q a LOGOut here? - } - } - - if( NeedReject ) - { - // Q a ReJecT Reply with reason code - fchs->reserved = ls_reject_code; - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - } - } - break; - - - - - case 0x0005: // LOGOut? - { - // was this LOGOUT because we sent a ELS_PDISC to an FC device - // with changed (or new) port_id, or does the port refuse - // to communicate to us? - // We maintain a logout counter - if we get 3 consecutive LOGOuts, - // give up! - LOGOUT_PAYLOAD logo; - BOOLEAN GiveUpOnDevice = FALSE; - ULONG ls_reject_code = 0; - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logo, sizeof(logo)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logo.port_name[0], // search linked list for WWN - NULL); // don't care about end of list - - if( pLoggedInPort ) // found the device? - { - // Q an ACC reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_LOGO_ACC, // Q Type - fchs ); // device to respond to - - // set login struct fields (LOGO_counter increment) - SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); - - // are we an Initiator? - if( fcChip->Options.initiator) - { - // we're an Initiator, so check if we should - // try (another?) login - - // Fabrics routinely log out from us after - // getting device info - don't try to log them - // back in. - if( (fchs->s_id & 0xFFF000) == 0xFFF000 ) - { - ; // do nothing - } - else if( pLoggedInPort->LOGO_counter <= 3) - { - // try (another) login (PLOGI request) - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PLOGI, // Q Type - fchs ); - - // Terminate I/O with "retry" potential - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, - PORTID_CHANGED); - } - else - { - printk(" Got 3 LOGOuts - terminating comm. with port_id %Xh\n", - fchs->s_id &&0xFFFFFF); - GiveUpOnDevice = TRUE; - } - } - else - { - GiveUpOnDevice = TRUE; - } - - - if( GiveUpOnDevice == TRUE ) - { - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, - DEVICE_REMOVED); - } - } - else // we don't know this WWN! - { - // Q a ReJecT Reply with reason code - fchs->reserved = ls_reject_code; - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - } - } - break; - - - - - // FABRIC only case - case 0x0461: // ELS RSCN (Registered State Change Notification)? - { - int Ports; - int i; - __u32 Buff; - // Typically, one or more devices have been added to or dropped - // from the Fabric. - // The format of this frame is defined in FC-FLA (Rev 2.7, Aug 1997) - // The first 32-bit word has a 2-byte Payload Length, which - // includes the 4 bytes of the first word. Consequently, - // this PL len must never be less than 4, must be a multiple of 4, - // and has a specified max value 256. - // (Endianess!) - Ports = ((fchs->pl[0] >>24) - 4) / 4; - Ports = Ports > 63 ? 63 : Ports; - - printk(" RSCN ports: %d\n", Ports); - if( Ports <= 0 ) // huh? - { - // ReJecT the command - fchs->reserved = LS_RJT_REASON( UNABLE_TO_PERFORM, 0); - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - - break; - } - else // Accept the command - { - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_ACC, // Q Type - fchs ); - } - - // Check the "address format" to determine action. - // We have 3 cases: - // 0 = Port Address; 24-bit address of affected device - // 1 = Area Address; MS 16 bits valid - // 2 = Domain Address; MS 8 bits valid - for( i=0; i<Ports; i++) - { - BigEndianSwap( (UCHAR*)&fchs->pl[i+1],(UCHAR*)&Buff, 4); - switch( Buff & 0xFF000000) - { - - case 0: // Port Address? - - case 0x01000000: // Area Domain? - case 0x02000000: // Domain Address - // For example, "port_id" 0x201300 - // OK, let's try a Name Service Request (Query) - fchs->s_id = 0xFFFFFC; // Name Server Address - cpqfcTSPutLinkQue( cpqfcHBAdata, FCS_NSR, fchs); - - break; - - - default: // huh? new value on version change? - break; - } - } - } - break; - - - - - default: // don't support this request (yet) - // set reject reason code - fchs->reserved = LS_RJT_REASON( UNABLE_TO_PERFORM, - REQUEST_NOT_SUPPORTED); - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - break; - } -} - - -static void ProcessELS_Reply( - CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ox_id = (fchs->ox_rx_id >>16); - ULONG ls_reject_code; - PFC_LOGGEDIN_PORT pLoggedInPort, pLastLoggedInPort; - - // If this is a valid reply, then we MUST have sent a request. - // Verify that we can find a valid request OX_ID corresponding to - // this reply - - - if( Exchanges->fcExchange[(fchs->ox_rx_id >>16)].type == 0) - { - printk(" *Discarding ACC/RJT frame, xID %04X/%04X* ", - ox_id, fchs->ox_rx_id & 0xffff); - goto Quit; // exit this routine - } - - - // Is the reply a RJT (reject)? - if( (fchs->pl[0] & 0xFFFFL) == 0x01) // Reject reply? - { -// ****** REJECT REPLY ******** - switch( Exchanges->fcExchange[ox_id].type ) - { - - case ELS_FDISC: // we sent out Fabric Discovery - case ELS_FLOGI: // we sent out FLOGI - - printk("RJT received on Fabric Login from %Xh, reason %Xh\n", - fchs->s_id, fchs->pl[1]); - - break; - - default: - break; - } - - goto Done; - } - - // OK, we have an ACCept... - // What's the ACC type? (according to what we sent) - switch( Exchanges->fcExchange[ox_id].type ) - { - - case ELS_PLOGI: // we sent out PLOGI - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - - // login ACC payload acceptable; search for WWN in our list - // of fcPorts - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort == NULL) // WWN not found - new port - { - - pLoggedInPort = CreateFcPort( - cpqfcHBAdata, - pLastLoggedInPort, - fchs, - &logi); - - if( pLoggedInPort == NULL ) - { - printk(" cpqfcTS: New port allocation failed - lost FC device!\n"); - // Now Q a LOGOut Request, since we won't be talking to that device - - goto Done; // exit with error! dropped login frame - } - } - else // WWN was already known. Ensure that any open - // exchanges for this WWN are terminated. - // NOTE: It's possible that a device can change its - // 24-bit port_id after a Link init or Fabric change - // (e.g. LIP or Fabric RSCN). In that case, the old - // 24-bit port_id may be duplicated, or no longer exist. - { - - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - } - - // We have an fcPort struct - set fields accordingly - // not PDISC, originator - SetLoginFields( pLoggedInPort, fchs, FALSE, TRUE); - - // We just set a "port_id"; is it duplicated? - TestDuplicatePortId( cpqfcHBAdata, pLoggedInPort); - - // For Fabric operation, we issued PLOGI to 0xFFFFFC - // so we can send SCR (State Change Registration) - // Check for this special case... - if( fchs->s_id == 0xFFFFFC ) - { - // PLOGI ACC was a Fabric response... issue SCR - fchs->s_id = 0xFFFFFD; // address for SCR - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_SCR, fchs); - } - - else - { - // Now we need a PRLI to enable FCP-SCSI operation - // set flags and Q up a ELS_PRLI - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PRLI, fchs); - } - } - else - { - // login payload unacceptable - reason in ls_reject_code - // Q up a Logout Request - printk("Login Payload unacceptable\n"); - - } - break; - - - // PDISC logic very similar to PLOGI, except we never want - // to allocate mem for "new" port, and we set flags differently - // (might combine later with PLOGI logic for efficiency) - case ELS_PDISC: // we sent out PDISC - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - BOOLEAN NeedLogin = FALSE; - - // login payload acceptable; search for WWN in our list - // of (previously seen) fcPorts - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort != NULL) // WWN found? - { - // WWN has same port_id as last login? (Of course, a properly - // working FC device should NEVER ACCept a PDISC if it's - // port_id changed, but check just in case...) - if( (fchs->s_id & 0xFFFFFF) == pLoggedInPort->port_id) - { - // Yes. We were expecting PDISC? - if( pLoggedInPort->pdisc ) - { - int i; - - - // PDISC expected -- set fields. (PDISC, Originator) - SetLoginFields( pLoggedInPort, fchs, TRUE, TRUE); - - // We are ready to resume FCP-SCSI to this device... - // Do we need to start anything that was Queued? - - for( i=0; i< TACH_SEST_LEN; i++) - { - // see if any exchange for this PDISC'd port was queued - if( ((fchs->s_id &0xFFFFFF) == - (Exchanges->fcExchange[i].fchs.d_id & 0xFFFFFF)) - && - (Exchanges->fcExchange[i].status & EXCHANGE_QUEUED)) - { - fchs->reserved = i; // copy ExchangeID -// printk(" *Q x_ID %Xh after PDISC* ",i); - - cpqfcTSPutLinkQue( cpqfcHBAdata, EXCHANGE_QUEUED, fchs ); - } - } - - // Complete commands Q'd while we were waiting for Login - - UnblockScsiDevice( cpqfcHBAdata->HostAdapter, pLoggedInPort); - } - else - { - printk("Not expecting PDISC (pdisc=FALSE)\n"); - NeedLogin = TRUE; - } - } - else - { - printk("PDISC PortID change: old %Xh, new %Xh\n", - pLoggedInPort->port_id, fchs->s_id &0xFFFFFF); - NeedLogin = TRUE; - - } - } - else - { - printk("PDISC ACC from unknown WWN\n"); - NeedLogin = TRUE; - } - - if( NeedLogin) - { - - // The PDISC failed. Set login struct flags accordingly, - // terminate any I/O to this port, and Q a PLOGI - if( pLoggedInPort ) // FC device previously known? - { - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_LOGO, // Q Type - fchs ); // has port_id to send to - - // There are a variety of error scenarios which can result - // in PDISC failure, so as a catchall, add the check for - // duplicate port_id. - TestDuplicatePortId( cpqfcHBAdata, pLoggedInPort); - -// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; - pLoggedInPort->plogi = FALSE; - - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - } - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PLOGI, fchs ); - } - } - else - { - // login payload unacceptable - reason in ls_reject_code - // Q up a Logout Request - printk("ERROR: Login Payload unacceptable!\n"); - - } - - break; - - - - case ELS_PRLI: // we sent out PRLI - - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - (fchs->s_id & 0xFFFFFF), // search linked list for port_id - NULL, // DON'T search linked list for WWN - NULL); // don't care - - if( pLoggedInPort == NULL ) - { - // huh? - printk(" Unexpected PRLI ACCept frame!\n"); - - // Q a LOGOut here? - - goto Done; - } - - // verify the PRLI ACC payload - if( !verify_PRLI( fchs, &ls_reject_code) ) - { - // PRLI Reply is acceptable; were we expecting it? - if( pLoggedInPort->plogi ) - { - // yes, we expected the PRLI ACC (not PDISC; Originator) - SetLoginFields( pLoggedInPort, fchs, FALSE, TRUE); - - // OK, let's send a REPORT_LUNS command to determine - // whether VSA or PDA FCP-LUN addressing is used. - - cpqfcTSPutLinkQue( cpqfcHBAdata, SCSI_REPORT_LUNS, fchs ); - - // It's possible that a device we were talking to changed - // port_id, and has logged back in. This function ensures - // that I/O will resume. - UnblockScsiDevice( cpqfcHBAdata->HostAdapter, pLoggedInPort); - - } - else - { - // huh? - printk(" (unexpected) PRLI ACCept with plogi FALSE\n"); - - // Q a LOGOut here? - goto Done; - } - } - else - { - printk(" PRLI ACCept payload failed verify\n"); - - // Q a LOGOut here? - } - - break; - - case ELS_FLOGI: // we sent out FLOGI (Fabric Login) - - // update the upper 16 bits of our port_id in Tachyon - // the switch adds those upper 16 bits when responding - // to us (i.e. we are the destination_id) - fcChip->Registers.my_al_pa = (fchs->d_id & 0xFFFFFF); - writel( fcChip->Registers.my_al_pa, - fcChip->Registers.ReMapMemBase + TL_MEM_TACH_My_ID); - - // now send out a PLOGI to the well known port_id 0xFFFFFC - fchs->s_id = 0xFFFFFC; - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PLOGI, fchs); - - break; - - - case ELS_FDISC: // we sent out FDISC (Fabric Discovery (Login)) - - printk( " ELS_FDISC success "); - break; - - - case ELS_SCR: // we sent out State Change Registration - // now we can issue Name Service Request to find any - // Fabric-connected devices we might want to login to. - - - fchs->s_id = 0xFFFFFC; // Name Server Address - cpqfcTSPutLinkQue( cpqfcHBAdata, FCS_NSR, fchs); - - - break; - - - default: - printk(" *Discarding unknown ACC frame, xID %04X/%04X* ", - ox_id, fchs->ox_rx_id & 0xffff); - break; - } - - -Done: - // Regardless of whether the Reply is valid or not, the - // the exchange is done - complete - cpqfcTSCompleteExchange(cpqfcHBAdata->PciDev, fcChip, (fchs->ox_rx_id >>16)); - -Quit: - return; -} - - - - - - -// **************** Fibre Channel Services ************** -// This is where we process the Directory (Name) Service Reply -// to know which devices are on the Fabric - -static void ProcessFCS_Reply( - CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ox_id = (fchs->ox_rx_id >>16); -// ULONG ls_reject_code; -// PFC_LOGGEDIN_PORT pLoggedInPort, pLastLoggedInPort; - - // If this is a valid reply, then we MUST have sent a request. - // Verify that we can find a valid request OX_ID corresponding to - // this reply - - if( Exchanges->fcExchange[(fchs->ox_rx_id >>16)].type == 0) - { - printk(" *Discarding Reply frame, xID %04X/%04X* ", - ox_id, fchs->ox_rx_id & 0xffff); - goto Quit; // exit this routine - } - - - // OK, we were expecting it. Now check to see if it's a - // "Name Service" Reply, and if so force a re-validation of - // Fabric device logins (i.e. Start the login timeout and - // send PDISC or PLOGI) - // (Endianess Byte Swap?) - if( fchs->pl[1] == 0x02FC ) // Name Service - { - // got a new (or NULL) list of Fabric attach devices... - // Invalidate current logins - - PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; - while( pLoggedInPort ) // for all ports which are expecting - // PDISC after the next LIP, set the - // logoutTimer - { - - if( (pLoggedInPort->port_id & 0xFFFF00) // Fabric device? - && - (pLoggedInPort->port_id != 0xFFFFFC) ) // NOT the F_Port - { - pLoggedInPort->LOGO_timer = 6; // what's the Fabric timeout?? - // suspend any I/O in progress until - // PDISC received... - pLoggedInPort->prli = FALSE; // block FCP-SCSI commands - } - - pLoggedInPort = pLoggedInPort->pNextPort; - } - - if( fchs->pl[2] == 0x0280) // ACCept? - { - // Send PLOGI or PDISC to these Fabric devices - SendLogins( cpqfcHBAdata, &fchs->pl[4] ); - } - - - // As of this writing, the only reason to reject is because NO - // devices are left on the Fabric. We already started - // "logged out" timers; if the device(s) don't come - // back, we'll do the implicit logout in the heart beat - // timer routine - else // ReJecT - { - // this just means no Fabric device is visible at this instant - } - } - - // Regardless of whether the Reply is valid or not, the - // the exchange is done - complete - cpqfcTSCompleteExchange(cpqfcHBAdata->PciDev, fcChip, (fchs->ox_rx_id >>16)); - -Quit: - return; -} - - - - - - - -static void AnalyzeIncomingFrame( - CPQFCHBA *cpqfcHBAdata, - ULONG QNdx ) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - TachFCHDR_GCMND* fchs = - (TachFCHDR_GCMND*)fcLQ->Qitem[QNdx].ulBuff; -// ULONG ls_reject_code; // reason for rejecting login - LONG ExchangeID; -// FC_LOGGEDIN_PORT *pLoggedInPort; - BOOLEAN AbortAccept; - - ENTER("AnalyzeIncomingFrame"); - - - - switch( fcLQ->Qitem[QNdx].Type) // FCP or Unknown - { - - case SFQ_UNKNOWN: // unknown frame (e.g. LIP position frame, NOP, etc.) - - - // ********* FC-4 Device Data/ Fibre Channel Service ************* - if( ((fchs->d_id &0xF0000000) == 0) // R_CTL (upper nibble) 0x0? - && - (fchs->f_ctl & 0x20000000) ) // TYPE 20h is Fibre Channel Service - { - - // ************** FCS Reply ********************** - - if( (fchs->d_id & 0xff000000L) == 0x03000000L) // (31:23 R_CTL) - { - ProcessFCS_Reply( cpqfcHBAdata, fchs ); - - } // end of FCS logic - - } - - - // *********** Extended Link Service ************** - - else if( fchs->d_id & 0x20000000 // R_CTL 0x2? - && - (fchs->f_ctl & 0x01000000) ) // TYPE = 1 - { - - // these frames are either a response to - // something we sent (0x23) or "unsolicited" - // frames (0x22). - - - // **************Extended Link REPLY ********************** - // R_CTL Solicited Control Reply - - if( (fchs->d_id & 0xff000000L) == 0x23000000L) // (31:23 R_CTL) - { - - ProcessELS_Reply( cpqfcHBAdata, fchs ); - - } // end of "R_CTL Solicited Control Reply" - - - - - // **************Extended Link REQUEST ********************** - // (unsolicited commands from another port or task...) - - // R_CTL Ext Link REQUEST - else if( (fchs->d_id & 0xff000000L) == 0x22000000L && - (fchs->ox_rx_id != 0xFFFFFFFFL) ) // (ignore LIP frame) - { - - - - ProcessELS_Request( cpqfcHBAdata, fchs ); - - } - - - - // ************** LILP ********************** - else if( (fchs->d_id & 0xff000000L) == 0x22000000L && - (fchs->ox_rx_id == 0xFFFFFFFFL)) // (e.g., LIP frames) - - { - // SANMark specifies that when available, we must use - // the LILP frame to determine which ALPAs to send Port Discovery - // to... - - if( fchs->pl[0] == 0x0711L) // ELS_PLOGI? - { -// UCHAR *ptr = (UCHAR*)&fchs->pl[1]; -// printk(" %d ALPAs found\n", *ptr); - memcpy( fcChip->LILPmap, &fchs->pl[1], 32*4); // 32 DWORDs - fcChip->Options.LILPin = 1; // our LILPmap is valid! - // now post to make Port Discovery happen... - cpqfcTSPutLinkQue( cpqfcHBAdata, LINKACTIVE, fchs); - } - } - } - - - // ***************** BASIC LINK SERVICE ***************** - - else if( fchs->d_id & 0x80000000 // R_CTL: - && // Basic Link Service Request - !(fchs->f_ctl & 0xFF000000) ) // type=0 for BLS - { - - // Check for ABTS (Abort Sequence) - if( (fchs->d_id & 0x8F000000) == 0x81000000) - { - // look for OX_ID, S_ID pair that matches in our - // fcExchanges table; if found, reply with ACCept and complete - // the exchange - - // Per PLDA, an ABTS is sent by an initiator; therefore - // assume that if we have an exhange open to the port who - // sent ABTS, it will be the d_id of what we sent. - for( ExchangeID = 0, AbortAccept=FALSE; - ExchangeID < TACH_SEST_LEN; ExchangeID++) - { - // Valid "target" exchange 24-bit port_id matches? - // NOTE: For the case of handling Intiator AND Target - // functions on the same chip, we can have TWO Exchanges - // with the same OX_ID -- OX_ID/FFFF for the CMND, and - // OX_ID/RX_ID for the XRDY or DATA frame(s). Ideally, - // we would like to support ABTS from Initiators or Targets, - // but it's not clear that can be supported on Tachyon for - // all cases (requires more investigation). - - if( (Exchanges->fcExchange[ ExchangeID].type == SCSI_TWE || - Exchanges->fcExchange[ ExchangeID].type == SCSI_TRE) - && - ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == - (fchs->s_id & 0xFFFFFF)) ) - { - - // target xchnge port_id matches -- how about OX_ID? - if( (Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id &0xFFFF0000) - == (fchs->ox_rx_id & 0xFFFF0000) ) - // yes! post ACCept response; will be completed by fcStart - { - Exchanges->fcExchange[ ExchangeID].status = TARGET_ABORT; - - // copy (add) rx_id field for simplified ACCept reply - fchs->ox_rx_id = - Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id; - - cpqfcTSPutLinkQue( cpqfcHBAdata, - BLS_ABTS_ACC, // Q Type - fchs ); // void QueContent - AbortAccept = TRUE; - printk("ACCepting ABTS for x_ID %8.8Xh, SEST pair %8.8Xh\n", - fchs->ox_rx_id, Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id); - break; // ABTS can affect only ONE exchange -exit loop - } - } - } // end of FOR loop - if( !AbortAccept ) // can't ACCept ABTS - send Reject - { - printk("ReJecTing: can't find ExchangeID %8.8Xh for ABTS command\n", - fchs->ox_rx_id); - if( Exchanges->fcExchange[ ExchangeID].type - && - !(fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len - & 0x80000000)) - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - else - { - printk("Unexpected ABTS ReJecT! SEST[%X] Dword 0: %Xh\n", - ExchangeID, fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len); - } - } - } - - // Check for BLS {ABTS? (Abort Sequence)} ACCept - else if( (fchs->d_id & 0x8F000000) == 0x84000000) - { - // target has responded with ACC for our ABTS; - // complete the indicated exchange with ABORTED status - // Make no checks for correct RX_ID, since - // all we need to conform ABTS ACC is the OX_ID. - // Verify that the d_id matches! - - ExchangeID = (fchs->ox_rx_id >> 16) & 0x7FFF; // x_id from ACC -// printk("ABTS ACC x_ID 0x%04X 0x%04X, status %Xh\n", -// fchs->ox_rx_id >> 16, fchs->ox_rx_id & 0xffff, -// Exchanges->fcExchange[ExchangeID].status); - - - - if( ExchangeID < TACH_SEST_LEN ) // x_ID makes sense - { - // Does "target" exchange 24-bit port_id match? - // (See "NOTE" above for handling Intiator AND Target in - // the same device driver) - // First, if this is a target response, then we originated - // (initiated) it with BLS_ABTS: - - if( (Exchanges->fcExchange[ ExchangeID].type == BLS_ABTS) - - && - // Second, does the source of this ACC match the destination - // of who we originally sent it to? - ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == - (fchs->s_id & 0xFFFFFF)) ) - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID ); - } - } - } - // Check for BLS {ABTS? (Abort Sequence)} ReJecT - else if( (fchs->d_id & 0x8F000000) == 0x85000000) - { - // target has responded with RJT for our ABTS; - // complete the indicated exchange with ABORTED status - // Make no checks for correct RX_ID, since - // all we need to conform ABTS ACC is the OX_ID. - // Verify that the d_id matches! - - ExchangeID = (fchs->ox_rx_id >> 16) & 0x7FFF; // x_id from ACC -// printk("BLS_ABTS RJT on Exchange 0x%04X 0x%04X\n", -// fchs->ox_rx_id >> 16, fchs->ox_rx_id & 0xffff); - - if( ExchangeID < TACH_SEST_LEN ) // x_ID makes sense - { - // Does "target" exchange 24-bit port_id match? - // (See "NOTE" above for handling Intiator AND Target in - // the same device driver) - // First, if this is a target response, then we originated - // (initiated) it with BLS_ABTS: - - if( (Exchanges->fcExchange[ ExchangeID].type == BLS_ABTS) - - && - // Second, does the source of this ACC match the destination - // of who we originally sent it to? - ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == - (fchs->s_id & 0xFFFFFF)) ) - { - // YES! NOTE: There is a bug in CPQ's RA-4000 box - // where the "reason code" isn't returned in the payload - // For now, simply presume the reject is because the target - // already completed the exchange... - -// printk("complete x_ID %Xh on ABTS RJT\n", ExchangeID); - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID ); - } - } - } // end of ABTS check - } // end of Basic Link Service Request - break; - - default: - printk("AnalyzeIncomingFrame: unknown type: %Xh(%d)\n", - fcLQ->Qitem[QNdx].Type, - fcLQ->Qitem[QNdx].Type); - break; - } -} - - -// Function for Port Discovery necessary after every FC -// initialization (e.g. LIP). -// Also may be called if from Fabric Name Service logic. - -static void SendLogins( CPQFCHBA *cpqfcHBAdata, __u32 *FabricPortIds ) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ulStatus=0; - TachFCHDR_GCMND fchs; // copy fields for transmission - int i; - ULONG loginType; - LONG ExchangeID; - PFC_LOGGEDIN_PORT pLoggedInPort; - __u32 PortIds[ number_of_al_pa]; - int NumberOfPorts=0; - - // We're going to presume (for now) that our limit of Fabric devices - // is the same as the number of alpa on a private loop (126 devices). - // (Of course this could be changed to support however many we have - // memory for). - memset( &PortIds[0], 0, sizeof(PortIds)); - - // First, check if this login is for our own Link Initialization - // (e.g. LIP on FC-AL), or if we have knowledge of Fabric devices - // from a switch. If we are logging into Fabric devices, we'll - // have a non-NULL FabricPortId pointer - - if( FabricPortIds != NULL) // may need logins - { - int LastPort=FALSE; - i = 0; - while( !LastPort) - { - // port IDs From NSR payload; byte swap needed? - BigEndianSwap( (UCHAR*)FabricPortIds, (UCHAR*)&PortIds[i], 4); - -// printk("FPortId[%d] %Xh ", i, PortIds[i]); - if( PortIds[i] & 0x80000000) - LastPort = TRUE; - - PortIds[i] &= 0xFFFFFF; // get 24-bit port_id - // some non-Fabric devices (like the Crossroads Fibre/Scsi bridge) - // erroneously use ALPA 0. - if( PortIds[i] ) // need non-zero port_id... - i++; - - if( i >= number_of_al_pa ) // (in)sanity check - break; - FabricPortIds++; // next... - } - - NumberOfPorts = i; -// printk("NumberOf Fabric ports %d", NumberOfPorts); - } - - else // need to send logins on our "local" link - { - - // are we a loop port? If so, check for reception of LILP frame, - // and if received use it (SANMark requirement) - if( fcChip->Options.LILPin ) - { - int j=0; - // sanity check on number of ALPAs from LILP frame... - // For format of LILP frame, see FC-AL specs or - // "Fibre Channel Bench Reference", J. Stai, 1995 (ISBN 1-879936-17-8) - // First byte is number of ALPAs - i = fcChip->LILPmap[0] >= (32*4) ? 32*4 : fcChip->LILPmap[0]; - NumberOfPorts = i; -// printk(" LILP alpa count %d ", i); - while( i > 0) - { - PortIds[j] = fcChip->LILPmap[1+ j]; - j++; i--; - } - } - else // have to send login to everybody - { - int j=0; - i = number_of_al_pa; - NumberOfPorts = i; - while( i > 0) - { - PortIds[j] = valid_al_pa[j]; // all legal ALPAs - j++; i--; - } - } - } - - - // Now we have a copy of the port_ids (and how many)... - for( i = 0; i < NumberOfPorts; i++) - { - // 24-bit FC Port ID - fchs.s_id = PortIds[i]; // note: only 8-bits used for ALPA - - - // don't log into ourselves (Linux Scsi disk scan will stop on - // no TARGET support error on us, and quit trying for rest of devices) - if( (fchs.s_id & 0xFF ) == (fcChip->Registers.my_al_pa & 0xFF) ) - continue; - - // fabric login needed? - if( (fchs.s_id == 0) || - (fcChip->Options.fabric == 1) ) - { - fcChip->Options.flogi = 1; // fabric needs longer for login - // Do we need FLOGI or FDISC? - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search SCSI Nexus - 0xFFFFFC, // search linked list for Fabric port_id - NULL, // don't search WWN - NULL); // (don't care about end of list) - - if( pLoggedInPort ) // If found, we have prior experience with - // this port -- check whether PDISC is needed - { - if( pLoggedInPort->flogi ) - { - // does the switch support FDISC?? (FLOGI for now...) - loginType = ELS_FLOGI; // prior FLOGI still valid - } - else - loginType = ELS_FLOGI; // expired FLOGI - } - else // first FLOGI? - loginType = ELS_FLOGI; - - - fchs.s_id = 0xFFFFFE; // well known F_Port address - - // Fabrics are not required to support FDISC, and - // it's not clear if that helps us anyway, since - // we'll want a Name Service Request to re-verify - // visible devices... - // Consequently, we always want our upper 16 bit - // port_id to be zero (we'll be rejected if we - // use our prior port_id if we've been plugged into - // a different switch port). - // Trick Tachyon to send to ALPA 0 (see TL/TS UG, pg 87) - // If our ALPA is 55h for instance, we want the FC frame - // s_id to be 0x000055, while Tach's my_al_pa register - // must be 0x000155, to force an OPN at ALPA 0 - // (the Fabric port) - fcChip->Registers.my_al_pa &= 0xFF; // only use ALPA for FLOGI - writel( fcChip->Registers.my_al_pa | 0x0100, - fcChip->Registers.ReMapMemBase + TL_MEM_TACH_My_ID); - } - - else // not FLOGI... - { - // should we send PLOGI or PDISC? Check if any prior port_id - // (e.g. alpa) completed a PLOGI/PRLI exchange by checking - // the pdisc flag. - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search SCSI Nexus - fchs.s_id, // search linked list for al_pa - NULL, // don't search WWN - NULL); // (don't care about end of list) - - - - if( pLoggedInPort ) // If found, we have prior experience with - // this port -- check whether PDISC is needed - { - if( pLoggedInPort->pdisc ) - { - loginType = ELS_PDISC; // prior PLOGI and PRLI maybe still valid - - } - else - loginType = ELS_PLOGI; // prior knowledge, but can't use PDISC - } - else // never talked to this port_id before - loginType = ELS_PLOGI; // prior knowledge, but can't use PDISC - } - - - - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - loginType, // e.g. PLOGI - &fchs, // no incoming frame (we are originator) - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup OK? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - - if( loginType == ELS_PDISC ) - { - // now, we really shouldn't Revalidate SEST exchanges until - // we get an ACC reply from our target and verify that - // the target address/WWN is unchanged. However, when a fast - // target gets the PDISC, they can send SEST Exchange data - // before we even get around to processing the PDISC ACC. - // Consequently, we lose the I/O. - // To avoid this, go ahead and Revalidate when the PDISC goes - // out, anticipating that the ACC will be truly acceptable - // (this happens 99.9999....% of the time). - // If we revalidate a SEST write, and write data goes to a - // target that is NOT the one we originated the WRITE to, - // that target is required (FCP-SCSI specs, etc) to discard - // our WRITE data. - - // Re-validate SEST entries (Tachyon hardware assists) - RevalidateSEST( cpqfcHBAdata->HostAdapter, pLoggedInPort); - //TriggerHBA( fcChip->Registers.ReMapMemBase, 1); - } - } - else // give up immediately on error - { -#ifdef LOGIN_DBG - printk("SendLogins: fcStartExchange failed: %Xh\n", ulStatus ); -#endif - break; - } - - - if( fcChip->Registers.FMstatus.value & 0x080 ) // LDn during Port Disc. - { - ulStatus = LNKDWN_OSLS; -#ifdef LOGIN_DBG - printk("SendLogins: PortDisc aborted (LDn) @alpa %Xh\n", fchs.s_id); -#endif - break; - } - // Check the exchange for bad status (i.e. FrameTimeOut), - // and complete on bad status (most likely due to BAD_ALPA) - // on LDn, DPC function may already complete (ABORT) a started - // exchange, so check type first (type = 0 on complete). - if( Exchanges->fcExchange[ExchangeID].status ) - { -#ifdef LOGIN_DBG - printk("completing x_ID %X on status %Xh\n", - ExchangeID, Exchanges->fcExchange[ExchangeID].status); -#endif - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - } - else // Xchange setup failed... - { -#ifdef LOGIN_DBG - printk("FC: cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); -#endif - break; - } - } - if( !ulStatus ) - { - // set the event signifying that all ALPAs were sent out. -#ifdef LOGIN_DBG - printk("SendLogins: PortDiscDone\n"); -#endif - cpqfcHBAdata->PortDiscDone = 1; - - - // TL/TS UG, pg. 184 - // 0x0065 = 100ms for RT_TOV - // 0x01f5 = 500ms for ED_TOV - fcChip->Registers.ed_tov.value = 0x006501f5L; - writel( fcChip->Registers.ed_tov.value, - (fcChip->Registers.ed_tov.address)); - - // set the LP_TOV back to ED_TOV (i.e. 500 ms) - writel( 0x00000010, fcChip->Registers.ReMapMemBase +TL_MEM_FM_TIMEOUT2); - } - else - { - printk("SendLogins: failed at xchng %Xh, alpa %Xh, status %Xh\n", - ExchangeID, fchs.s_id, ulStatus); - } - LEAVE("SendLogins"); - -} - - -// for REPORT_LUNS documentation, see "In-Depth Exploration of Scsi", -// D. Deming, 1994, pg 7-19 (ISBN 1-879936-08-9) -static void ScsiReportLunsDone(Scsi_Cmnd *Cmnd) -{ - struct Scsi_Host *HostAdapter = Cmnd->device->host; - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LOGGEDIN_PORT pLoggedInPort; - int LunListLen=0; - int i; - ULONG x_ID = 0xFFFFFFFF; - UCHAR *ucBuff = Cmnd->request_buffer; - -// printk("cpqfcTS: ReportLunsDone \n"); - // first, we need to find the Exchange for this command, - // so we can find the fcPort struct to make the indicated - // changes. - for( i=0; i< TACH_SEST_LEN; i++) - { - if( Exchanges->fcExchange[i].type // exchange defined? - && - (Exchanges->fcExchange[i].Cmnd == Cmnd) ) // matches? - - { - x_ID = i; // found exchange! - break; - } - } - if( x_ID == 0xFFFFFFFF) - { -// printk("cpqfcTS: ReportLuns failed - no FC Exchange\n"); - goto Done; // Report Luns FC Exchange gone; - // exchange probably Terminated by Implicit logout - } - - - // search linked list for the port_id we sent INQUIRY to - pLoggedInPort = fcFindLoggedInPort( fcChip, - NULL, // DON'T search Scsi Nexus (we will set it) - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF, - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - if( !pLoggedInPort ) - { -// printk("cpqfcTS: ReportLuns failed - device gone\n"); - goto Done; // error! can't find logged in Port - } - LunListLen = ucBuff[3]; - LunListLen += ucBuff[2]>>8; - - if( !LunListLen ) // failed - { - // generically speaking, a soft error means we should retry... - if( (Cmnd->result >> 16) == DID_SOFT_ERROR ) - { - if( ((Cmnd->sense_buffer[2] & 0xF) == 0x6) && - (Cmnd->sense_buffer[12] == 0x29) ) // Sense Code "reset" - { - TachFCHDR_GCMND *fchs = &Exchanges->fcExchange[ x_ID].fchs; - // did we fail because of "check condition, device reset?" - // e.g. the device was reset (i.e., at every power up) - // retry the Report Luns - - // who are we sending it to? - // we know this because we have a copy of the command - // frame from the original Report Lun command - - // switch the d_id/s_id fields, because the Exchange Build - // context is "reply to source". - - fchs->s_id = fchs->d_id; // (temporarily re-use the struct) - cpqfcTSPutLinkQue( cpqfcHBAdata, SCSI_REPORT_LUNS, fchs ); - } - } - else // probably, the device doesn't support Report Luns - pLoggedInPort->ScsiNexus.VolumeSetAddressing = 0; - } - else // we have LUN info - check VSA mode - { - // for now, assume all LUNs will have same addr mode - // for VSA, payload byte 8 will be 0x40; otherwise, 0 - pLoggedInPort->ScsiNexus.VolumeSetAddressing = ucBuff[8]; - - // Since we got a Report Luns answer, set lun masking flag - pLoggedInPort->ScsiNexus.LunMasking = 1; - - if( LunListLen > 8*CPQFCTS_MAX_LUN) // We expect CPQFCTS_MAX_LUN max - LunListLen = 8*CPQFCTS_MAX_LUN; - -/* - printk("Device WWN %08X%08X Reports Luns @: ", - (ULONG)(pLoggedInPort->u.liWWN &0xFFFFFFFF), - (ULONG)(pLoggedInPort->u.liWWN>>32)); - - for( i=8; i<LunListLen+8; i+=8) - { - printk("%02X%02X ", ucBuff[i], ucBuff[i+1] ); - } - printk("\n"); -*/ - - // Since the device was kind enough to tell us where the - // LUNs are, lets ensure they are contiguous for Linux's - // SCSI driver scan, which expects them to start at 0. - // Since Linux only supports 8 LUNs, only copy the first - // eight from the report luns command - - // e.g., the Compaq RA4x00 f/w Rev 2.54 and above may report - // LUNs 4001, 4004, etc., because other LUNs are masked from - // this HBA (owned by someone else). We'll make those appear as - // LUN 0, 1... to Linux - { - int j; - int AppendLunList = 0; - // Walk through the LUN list. The 'j' array number is - // Linux's lun #, while the value of .lun[j] is the target's - // lun #. - // Once we build a LUN list, it's possible for a known device - // to go offline while volumes (LUNs) are added. Later, - // the device will do another PLOGI ... Report Luns command, - // and we must not alter the existing Linux Lun map. - // (This will be very rare). - for( j=0; j < CPQFCTS_MAX_LUN; j++) - { - if( pLoggedInPort->ScsiNexus.lun[j] != 0xFF ) - { - AppendLunList = 1; - break; - } - } - if( AppendLunList ) - { - int k; - int FreeLunIndex; -// printk("cpqfcTS: AppendLunList\n"); - - // If we get a new Report Luns, we cannot change - // any existing LUN mapping! (Only additive entry) - // For all LUNs in ReportLun list - // if RL lun != ScsiNexus lun - // if RL lun present in ScsiNexus lun[], continue - // else find ScsiNexus lun[]==FF and add, continue - - for( i=8, j=0; i<LunListLen+8 && j< CPQFCTS_MAX_LUN; i+=8, j++) - { - if( pLoggedInPort->ScsiNexus.lun[j] != ucBuff[i+1] ) - { - // something changed from the last Report Luns - printk(" cpqfcTS: Report Lun change!\n"); - for( k=0, FreeLunIndex=CPQFCTS_MAX_LUN; - k < CPQFCTS_MAX_LUN; k++) - { - if( pLoggedInPort->ScsiNexus.lun[k] == 0xFF) - { - FreeLunIndex = k; - break; - } - if( pLoggedInPort->ScsiNexus.lun[k] == ucBuff[i+1] ) - break; // we already masked this lun - } - if( k >= CPQFCTS_MAX_LUN ) - { - printk(" no room for new LUN %d\n", ucBuff[i+1]); - } - else if( k == FreeLunIndex ) // need to add LUN - { - pLoggedInPort->ScsiNexus.lun[k] = ucBuff[i+1]; -// printk("add [%d]->%02d\n", k, pLoggedInPort->ScsiNexus.lun[k]); - - } - else - { - // lun already known - } - break; - } - } - // print out the new list... - for( j=0; j< CPQFCTS_MAX_LUN; j++) - { - if( pLoggedInPort->ScsiNexus.lun[j] == 0xFF) - break; // done -// printk("[%d]->%02d ", j, pLoggedInPort->ScsiNexus.lun[j]); - } - } - else - { -// printk("Linux SCSI LUNs[] -> Device LUNs: "); - // first time - this is easy - for( i=8, j=0; i<LunListLen+8 && j< CPQFCTS_MAX_LUN; i+=8, j++) - { - pLoggedInPort->ScsiNexus.lun[j] = ucBuff[i+1]; -// printk("[%d]->%02d ", j, pLoggedInPort->ScsiNexus.lun[j]); - } -// printk("\n"); - } - } - } - -Done: ; -} - -extern int is_private_data_of_cpqfc(CPQFCHBA *hba, void * pointer); -extern void cpqfc_free_private_data(CPQFCHBA *hba, cpqfc_passthru_private_t *data); - -static void -call_scsi_done(Scsi_Cmnd *Cmnd) -{ - CPQFCHBA *hba; - hba = (CPQFCHBA *) Cmnd->device->host->hostdata; - // Was this command a cpqfc passthru ioctl ? - if (Cmnd->sc_request != NULL && Cmnd->device->host != NULL && - Cmnd->device->host->hostdata != NULL && - is_private_data_of_cpqfc((CPQFCHBA *) Cmnd->device->host->hostdata, - Cmnd->sc_request->upper_private_data)) { - cpqfc_free_private_data(hba, - Cmnd->sc_request->upper_private_data); - Cmnd->sc_request->upper_private_data = NULL; - Cmnd->result &= 0xff00ffff; - Cmnd->result |= (DID_PASSTHROUGH << 16); // prevents retry - } - if (Cmnd->scsi_done != NULL) - (*Cmnd->scsi_done)(Cmnd); -} - -// After successfully getting a "Process Login" (PRLI) from an -// FC port, we want to Discover the LUNs so that we know the -// addressing type (e.g., FCP-SCSI Volume Set Address, Peripheral -// Unit Device), and whether SSP (Selective Storage Presentation or -// Lun Masking) has made the LUN numbers non-zero based or -// non-contiguous. To remain backward compatible with the SCSI-2 -// driver model, which expects a contiguous LUNs starting at 0, -// will use the ReportLuns info to map from "device" to "Linux" -// LUNs. -static void IssueReportLunsCommand( - CPQFCHBA* cpqfcHBAdata, - TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - PFC_LOGGEDIN_PORT pLoggedInPort; - struct scsi_cmnd *Cmnd = NULL; - struct scsi_device *ScsiDev = NULL; - LONG x_ID; - ULONG ulStatus; - UCHAR *ucBuff; - - if( !cpqfcHBAdata->PortDiscDone) // cleared by LDn - { - printk("Discard Q'd ReportLun command\n"); - goto Done; - } - - // find the device (from port_id) we're talking to - pLoggedInPort = fcFindLoggedInPort( fcChip, - NULL, // DON'T search Scsi Nexus - fchs->s_id & 0xFFFFFF, - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - if( pLoggedInPort ) // we'd BETTER find it! - { - - - if( !(pLoggedInPort->fcp_info & TARGET_FUNCTION) ) - goto Done; // forget it - FC device not a "target" - - - ScsiDev = scsi_get_host_dev (cpqfcHBAdata->HostAdapter); - if (!ScsiDev) - goto Done; - - Cmnd = scsi_get_command (ScsiDev, GFP_KERNEL); - if (!Cmnd) - goto Done; - - ucBuff = pLoggedInPort->ReportLunsPayload; - - memset( ucBuff, 0, REPORT_LUNS_PL); - - Cmnd->scsi_done = ScsiReportLunsDone; - - Cmnd->request_buffer = pLoggedInPort->ReportLunsPayload; - Cmnd->request_bufflen = REPORT_LUNS_PL; - - Cmnd->cmnd[0] = 0xA0; - Cmnd->cmnd[8] = REPORT_LUNS_PL >> 8; - Cmnd->cmnd[9] = (UCHAR)REPORT_LUNS_PL; - Cmnd->cmd_len = 12; - - Cmnd->device->channel = pLoggedInPort->ScsiNexus.channel; - Cmnd->device->id = pLoggedInPort->ScsiNexus.target; - - - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - SCSI_IRE, - fchs, - Cmnd, // buffer for Report Lun data - &x_ID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, x_ID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - } - else - // check reason for Exchange not being started - we might - // want to Queue and start later, or fail with error - { - - } - } - - else // Xchange setup failed... - printk(" cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); - } - else // like, we just got a PRLI ACC, and now the port is gone? - { - printk(" can't send ReportLuns - no login for port_id %Xh\n", - fchs->s_id & 0xFFFFFF); - } - - - -Done: - - if (Cmnd) - scsi_put_command (Cmnd); - if (ScsiDev) - scsi_free_host_dev (ScsiDev); -} - - - - - - - -static void CompleteBoardLockCmnd( CPQFCHBA *cpqfcHBAdata) -{ - int i; - for( i = CPQFCTS_REQ_QUEUE_LEN-1; i>= 0; i--) - { - if( cpqfcHBAdata->BoardLockCmnd[i] != NULL ) - { - Scsi_Cmnd *Cmnd = cpqfcHBAdata->BoardLockCmnd[i]; - cpqfcHBAdata->BoardLockCmnd[i] = NULL; - Cmnd->result = (DID_SOFT_ERROR << 16); // ask for retry -// printk(" BoardLockCmnd[%d] %p Complete, chnl/target/lun %d/%d/%d\n", -// i,Cmnd, Cmnd->channel, Cmnd->target, Cmnd->lun); - call_scsi_done(Cmnd); - } - } -} - - - - - - -// runs every 1 second for FC exchange timeouts and implicit FC device logouts - -void cpqfcTSheartbeat( unsigned long ptr ) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)ptr; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; - ULONG i; - unsigned long flags; - DECLARE_MUTEX_LOCKED(BoardLock); - - PCI_TRACE( 0xA8) - - if( cpqfcHBAdata->BoardLock) // Worker Task Running? - goto Skip; - - // STOP _que function - spin_lock_irqsave( cpqfcHBAdata->HostAdapter->host_lock, flags); - - PCI_TRACE( 0xA8) - - - cpqfcHBAdata->BoardLock = &BoardLock; // stop Linux SCSI command queuing - - // release the IO lock (and re-enable interrupts) - spin_unlock_irqrestore( cpqfcHBAdata->HostAdapter->host_lock, flags); - - // Ensure no contention from _quecommand or Worker process - CPQ_SPINLOCK_HBA( cpqfcHBAdata) - - PCI_TRACE( 0xA8) - - - disable_irq( cpqfcHBAdata->HostAdapter->irq); // our IRQ - - // Complete the "bad target" commands (normally only used during - // initialization, since we aren't supposed to call "scsi_done" - // inside the queuecommand() function). (this is overly contorted, - // scsi_done can be safely called from queuecommand for - // this bad target case. May want to simplify this later) - - for( i=0; i< CPQFCTS_MAX_TARGET_ID; i++) - { - if( cpqfcHBAdata->BadTargetCmnd[i] ) - { - Scsi_Cmnd *Cmnd = cpqfcHBAdata->BadTargetCmnd[i]; - cpqfcHBAdata->BadTargetCmnd[i] = NULL; - Cmnd->result = (DID_BAD_TARGET << 16); - call_scsi_done(Cmnd); - } - else - break; - } - - - // logged in ports -- re-login check (ports required to verify login with - // PDISC after LIP within 2 secs) - - // prevent contention - while( pLoggedInPort ) // for all ports which are expecting - // PDISC after the next LIP, check to see if - // time is up! - { - // Important: we only detect "timeout" condition on TRANSITION - // from non-zero to zero - if( pLoggedInPort->LOGO_timer ) // time-out "armed"? - { - if( !(--pLoggedInPort->LOGO_timer) ) // DEC from 1 to 0? - { - // LOGOUT time! Per PLDA, PDISC hasn't complete in 2 secs, so - // issue LOGO request and destroy all I/O with other FC port(s). - -/* - printk(" ~cpqfcTS heartbeat: LOGOut!~ "); - printk("Linux SCSI Chanl/Target %d/%d (port_id %06Xh) WWN %08X%08X\n", - pLoggedInPort->ScsiNexus.channel, - pLoggedInPort->ScsiNexus.target, - pLoggedInPort->port_id, - (ULONG)(pLoggedInPort->u.liWWN &0xFFFFFFFF), - (ULONG)(pLoggedInPort->u.liWWN>>32)); - -*/ - cpqfcTSImplicitLogout( cpqfcHBAdata, pLoggedInPort); - - } - // else simply decremented - maybe next time... - } - pLoggedInPort = pLoggedInPort->pNextPort; - } - - - - - - // ************ FC EXCHANGE TIMEOUT CHECK ************** - - for( i=0; i< TACH_MAX_XID; i++) - { - if( Exchanges->fcExchange[i].type ) // exchange defined? - { - - if( !Exchanges->fcExchange[i].timeOut ) // time expired - { - // Set Exchange timeout status - Exchanges->fcExchange[i].status |= FC2_TIMEOUT; - - if( i >= TACH_SEST_LEN ) // Link Service Exchange - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, i); // Don't "abort" LinkService - } - - else // SEST Exchange TO -- may post ABTS to Worker Thread Que - { - // (Make sure we don't keep timing it out; let other functions - // complete it or set the timeOut as needed) - Exchanges->fcExchange[i].timeOut = 30000; // seconds default - - if( Exchanges->fcExchange[i].type - & - (BLS_ABTS | BLS_ABTS_ACC ) ) - { - // For BLS_ABTS*, an upper level might still have - // an outstanding command waiting for low-level completion. - // Also, in the case of a WRITE, we MUST get confirmation - // of either ABTS ACC or RJT before re-using the Exchange. - // It's possible that the RAID cache algorithm can hang - // if we fail to complete a WRITE to a LBA, when a READ - // comes later to that same LBA. Therefore, we must - // ensure that the target verifies receipt of ABTS for - // the exchange - - printk("~TO Q'd ABTS (x_ID %Xh)~ ", i); -// TriggerHBA( fcChip->Registers.ReMapMemBase); - - // On timeout of a ABTS exchange, check to - // see if the FC device has a current valid login. - // If so, restart it. - pLoggedInPort = fcFindLoggedInPort( fcChip, - Exchanges->fcExchange[i].Cmnd, // find Scsi Nexus - 0, // DON'T search linked list for FC port id - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - // device exists? - if( pLoggedInPort ) // device exists? - { - if( pLoggedInPort->prli ) // logged in for FCP-SCSI? - { - // attempt to restart the ABTS - printk(" ~restarting ABTS~ "); - cpqfcTSStartExchange( cpqfcHBAdata, i ); - - } - } - } - else // not an ABTS - { - - // We expect the WorkerThread to change the xchng type to - // abort and set appropriate timeout. - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &i ); // timed-out - } - } - } - else // time not expired... - { - // decrement timeout: 1 or more seconds left - --Exchanges->fcExchange[i].timeOut; - } - } - } - - - enable_irq( cpqfcHBAdata->HostAdapter->irq); - - - CPQ_SPINUNLOCK_HBA( cpqfcHBAdata) - - cpqfcHBAdata->BoardLock = NULL; // Linux SCSI commands may be queued - - // Now, complete any Cmnd we Q'd up while BoardLock was held - - CompleteBoardLockCmnd( cpqfcHBAdata); - - - // restart the timer to run again (1 sec later) -Skip: - mod_timer( &cpqfcHBAdata->cpqfcTStimer, jiffies + HZ); - - PCI_TRACEO( i, 0xA8) - return; -} - - -// put valid FC-AL physical address in spec order -static const UCHAR valid_al_pa[]={ - 0xef, 0xe8, 0xe4, 0xe2, - 0xe1, 0xE0, 0xDC, 0xDA, - 0xD9, 0xD6, 0xD5, 0xD4, - 0xD3, 0xD2, 0xD1, 0xCe, - 0xCd, 0xCc, 0xCb, 0xCa, - 0xC9, 0xC7, 0xC6, 0xC5, - 0xC3, 0xBc, 0xBa, 0xB9, - 0xB6, 0xB5, 0xB4, 0xB3, - 0xB2, 0xB1, 0xae, 0xad, - 0xAc, 0xAb, 0xAa, 0xA9, - - 0xA7, 0xA6, 0xA5, 0xA3, - 0x9f, 0x9e, 0x9d, 0x9b, - 0x98, 0x97, 0x90, 0x8f, - 0x88, 0x84, 0x82, 0x81, - 0x80, 0x7c, 0x7a, 0x79, - 0x76, 0x75, 0x74, 0x73, - 0x72, 0x71, 0x6e, 0x6d, - 0x6c, 0x6b, 0x6a, 0x69, - 0x67, 0x66, 0x65, 0x63, - 0x5c, 0x5a, 0x59, 0x56, - - 0x55, 0x54, 0x53, 0x52, - 0x51, 0x4e, 0x4d, 0x4c, - 0x4b, 0x4a, 0x49, 0x47, - 0x46, 0x45, 0x43, 0x3c, - 0x3a, 0x39, 0x36, 0x35, - 0x34, 0x33, 0x32, 0x31, - 0x2e, 0x2d, 0x2c, 0x2b, - 0x2a, 0x29, 0x27, 0x26, - 0x25, 0x23, 0x1f, 0x1E, - 0x1d, 0x1b, 0x18, 0x17, - - 0x10, 0x0f, 8, 4, 2, 1 }; // ALPA 0 (Fabric) is special case - -const int number_of_al_pa = (sizeof(valid_al_pa) ); - - - -// this function looks up an al_pa from the table of valid al_pa's -// we decrement from the last decimal loop ID, because soft al_pa -// (our typical case) are assigned with highest priority (and high al_pa) -// first. See "In-Depth FC-AL", R. Kembel pg. 38 -// INPUTS: -// al_pa - 24 bit port identifier (8 bit al_pa on private loop) -// RETURN: -// Loop ID - serves are index to array of logged in ports -// -1 - invalid al_pa (not all 8 bit values are legal) - -#if (0) -static int GetLoopID( ULONG al_pa ) -{ - int i; - - for( i = number_of_al_pa -1; i >= 0; i--) // dec. - { - if( valid_al_pa[i] == (UCHAR)al_pa ) // take lowest 8 bits - return i; // success - found valid al_pa; return decimal LoopID - } - return -1; // failed - not found -} -#endif - -extern cpqfc_passthru_private_t *cpqfc_private(Scsi_Request *sr); - -// Search the singly (forward) linked list "fcPorts" looking for -// either the SCSI target (if != -1), port_id (if not NULL), -// or WWN (if not null), in that specific order. -// If we find a SCSI nexus (from Cmnd arg), set the SCp.phase -// field according to VSA or PDU -// RETURNS: -// Ptr to logged in port struct if found -// (NULL if not found) -// pLastLoggedInPort - ptr to last struct (for adding new ones) -// -PFC_LOGGEDIN_PORT fcFindLoggedInPort( - PTACHYON fcChip, - Scsi_Cmnd *Cmnd, // search linked list for Scsi Nexus (channel/target/lun) - ULONG port_id, // search linked list for al_pa, or - UCHAR wwn[8], // search linked list for WWN, or... - PFC_LOGGEDIN_PORT *pLastLoggedInPort ) - -{ - PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; - BOOLEAN target_id_valid=FALSE; - BOOLEAN port_id_valid=FALSE; - BOOLEAN wwn_valid=FALSE; - int i; - - - if( Cmnd != NULL ) - target_id_valid = TRUE; - - else if( port_id ) // note! 24-bit NULL address is illegal - port_id_valid = TRUE; - - else - { - if( wwn ) // non-null arg? (OK to pass NULL when not searching WWN) - { - for( i=0; i<8; i++) // valid WWN passed? NULL WWN invalid - { - if( wwn[i] != 0 ) - wwn_valid = TRUE; // any non-zero byte makes (presumably) valid - } - } - } - // check other options ... - - - // In case multiple search options are given, we use a priority - // scheme: - // While valid pLoggedIn Ptr - // If port_id is valid - // if port_id matches, return Ptr - // If wwn is valid - // if wwn matches, return Ptr - // Next Ptr in list - // - // Return NULL (not found) - - - while( pLoggedInPort ) // NULL marks end of list (1st ptr always valid) - { - if( pLastLoggedInPort ) // caller's pointer valid? - *pLastLoggedInPort = pLoggedInPort; // end of linked list - - if( target_id_valid ) - { - // check Linux Scsi Cmnd for channel/target Nexus match - // (all luns are accessed through matching "pLoggedInPort") - if( (pLoggedInPort->ScsiNexus.target == Cmnd->device->id) - && - (pLoggedInPort->ScsiNexus.channel == Cmnd->device->channel)) - { - // For "passthru" modes, the IOCTL caller is responsible - // for setting the FCP-LUN addressing - if (Cmnd->sc_request != NULL && Cmnd->device->host != NULL && - Cmnd->device->host->hostdata != NULL && - is_private_data_of_cpqfc((CPQFCHBA *) Cmnd->device->host->hostdata, - Cmnd->sc_request->upper_private_data)) { - /* This is a passthru... */ - cpqfc_passthru_private_t *pd; - pd = Cmnd->sc_request->upper_private_data; - Cmnd->SCp.phase = pd->bus; - // Cmnd->SCp.have_data_in = pd->pdrive; - Cmnd->SCp.have_data_in = Cmnd->device->lun; - } else { - /* This is not a passthru... */ - - // set the FCP-LUN addressing type - Cmnd->SCp.phase = pLoggedInPort->ScsiNexus.VolumeSetAddressing; - - // set the Device Type we got from the snooped INQUIRY string - Cmnd->SCp.Message = pLoggedInPort->ScsiNexus.InqDeviceType; - - // handle LUN masking; if not "default" (illegal) lun value, - // the use it. These lun values are set by a successful - // Report Luns command - if( pLoggedInPort->ScsiNexus.LunMasking == 1) - { - if (Cmnd->device->lun > sizeof(pLoggedInPort->ScsiNexus.lun)) - return NULL; - // we KNOW all the valid LUNs... 0xFF is invalid! - Cmnd->SCp.have_data_in = pLoggedInPort->ScsiNexus.lun[Cmnd->device->lun]; - if (pLoggedInPort->ScsiNexus.lun[Cmnd->device->lun] == 0xFF) - return NULL; - // printk("xlating lun %d to 0x%02x\n", Cmnd->lun, - // pLoggedInPort->ScsiNexus.lun[Cmnd->lun]); - } - else - Cmnd->SCp.have_data_in = Cmnd->device->lun; // Linux & target luns match - } - break; // found it! - } - } - - if( port_id_valid ) // look for alpa first - { - if( pLoggedInPort->port_id == port_id ) - break; // found it! - } - if( wwn_valid ) // look for wwn second - { - - if( !memcmp( &pLoggedInPort->u.ucWWN[0], &wwn[0], 8)) - { - // all 8 bytes of WWN match - break; // found it! - } - } - - pLoggedInPort = pLoggedInPort->pNextPort; // try next port - } - - return pLoggedInPort; -} - - - - -// -// We need to examine the SEST table and re-validate -// any open Exchanges for this LoggedInPort -// To make Tachyon pay attention, Freeze FCP assists, -// set VAL bits, Unfreeze FCP assists -static void RevalidateSEST( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG x_ID; - BOOLEAN TachFroze = FALSE; - - - // re-validate any SEST exchanges that are permitted - // to survive the link down (e.g., good PDISC performed) - for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) - { - - // If the SEST entry port_id matches the pLoggedInPort, - // we need to re-validate - if( (Exchanges->fcExchange[ x_ID].type == SCSI_IRE) - || - (Exchanges->fcExchange[ x_ID].type == SCSI_IWE)) - { - - if( (Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF) // (24-bit port ID) - == pLoggedInPort->port_id) - { -// printk(" re-val xID %Xh ", x_ID); - if( !TachFroze ) // freeze if not already frozen - TachFroze |= FreezeTach( cpqfcHBAdata); - fcChip->SEST->u[ x_ID].IWE.Hdr_Len |= 0x80000000; // set VAL bit - } - } - } - - if( TachFroze) - { - fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists - } -} - - -// Complete an Linux Cmnds that we Queued because -// our FC link was down (cause immediate retry) - -static void UnblockScsiDevice( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - Scsi_Cmnd* *SCptr = &cpqfcHBAdata->LinkDnCmnd[0]; - Scsi_Cmnd *Cmnd; - int indx; - - - - // if the device was previously "blocked", make sure - // we unblock it so Linux SCSI will resume - - pLoggedInPort->device_blocked = FALSE; // clear our flag - - // check the Link Down command ptr buffer; - // we can complete now causing immediate retry - for( indx=0; indx < CPQFCTS_REQ_QUEUE_LEN; indx++, SCptr++) - { - if( *SCptr != NULL ) // scsi command to complete? - { -#ifdef DUMMYCMND_DBG - printk("complete Cmnd %p in LinkDnCmnd[%d]\n", *SCptr,indx); -#endif - Cmnd = *SCptr; - - - // Are there any Q'd commands for this target? - if( (Cmnd->device->id == pLoggedInPort->ScsiNexus.target) - && - (Cmnd->device->channel == pLoggedInPort->ScsiNexus.channel) ) - { - Cmnd->result = (DID_SOFT_ERROR <<16); // force retry - if( Cmnd->scsi_done == NULL) - { - printk("LinkDnCmnd scsi_done ptr null, port_id %Xh\n", - pLoggedInPort->port_id); - } - else - call_scsi_done(Cmnd); - *SCptr = NULL; // free this slot for next use - } - } - } -} - - -//#define WWN_DBG 1 - -static void SetLoginFields( - PFC_LOGGEDIN_PORT pLoggedInPort, - TachFCHDR_GCMND* fchs, - BOOLEAN PDisc, - BOOLEAN Originator) -{ - LOGIN_PAYLOAD logi; // FC-PH Port Login - PRLI_REQUEST prli; // copy for BIG ENDIAN switch - int i; -#ifdef WWN_DBG - ULONG ulBuff; -#endif - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort->Originator = Originator; - pLoggedInPort->port_id = fchs->s_id & 0xFFFFFF; - - switch( fchs->pl[0] & 0xffff ) - { - case 0x00000002: // PLOGI or PDISC ACCept? - if( PDisc ) // PDISC accept - goto PDISC_case; - - case 0x00000003: // ELS_PLOGI or ELS_PLOGI_ACC - - // Login BB_credit typically 0 for Tachyons - pLoggedInPort->BB_credit = logi.cmn_services.bb_credit; - - // e.g. 128, 256, 1024, 2048 per FC-PH spec - // We have to use this when setting up SEST Writes, - // since that determines frame size we send. - pLoggedInPort->rx_data_size = logi.class3.rx_data_size; - pLoggedInPort->plogi = TRUE; - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; // ELS_PLOGI resets - pLoggedInPort->flogi = FALSE; // ELS_PLOGI resets - pLoggedInPort->logo = FALSE; // ELS_PLOGI resets - pLoggedInPort->LOGO_counter = 0;// ELS_PLOGI resets - pLoggedInPort->LOGO_timer = 0;// ELS_PLOGI resets - - // was this PLOGI to a Fabric? - if( pLoggedInPort->port_id == 0xFFFFFC ) // well know address - pLoggedInPort->flogi = TRUE; - - - for( i=0; i<8; i++) // copy the LOGIN port's WWN - pLoggedInPort->u.ucWWN[i] = logi.port_name[i]; - -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("PLOGI port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh fcPort %p\n", ulBuff, pLoggedInPort); -#endif - break; - - - - - case 0x00000005: // ELS_LOGO (logout) - - - pLoggedInPort->plogi = FALSE; - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; // ELS_PLOGI resets - pLoggedInPort->flogi = FALSE; // ELS_PLOGI resets - pLoggedInPort->logo = TRUE; // ELS_PLOGI resets - pLoggedInPort->LOGO_counter++; // ELS_PLOGI resets - pLoggedInPort->LOGO_timer = 0; -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("LOGO port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh\n", ulBuff); -#endif - break; - - - -PDISC_case: - case 0x00000050: // ELS_PDISC or ELS_PDISC_ACC - pLoggedInPort->LOGO_timer = 0; // stop the time-out - - pLoggedInPort->prli = TRUE; // ready to accept FCP-SCSI I/O - - - -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("PDISC port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh\n", ulBuff); -#endif - - - - break; - - - - case 0x1020L: // PRLI? - case 0x1002L: // PRLI ACCept? - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&prli, sizeof(prli)); - - pLoggedInPort->fcp_info = prli.fcp_info; // target/initiator flags - pLoggedInPort->prli = TRUE; // PLOGI resets, PDISC doesn't - - pLoggedInPort->pdisc = TRUE; // expect to send (or receive) PDISC - // next time - pLoggedInPort->LOGO_timer = 0; // will be set next LinkDown -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("PRLI port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh\n", ulBuff); -#endif - - break; - - } - - return; -} - - - - - - -static void BuildLinkServicePayload( PTACHYON fcChip, ULONG type, void* payload) -{ - LOGIN_PAYLOAD *plogi; // FC-PH Port Login - LOGIN_PAYLOAD PlogiPayload; // copy for BIG ENDIAN switch - PRLI_REQUEST *prli; // FCP-SCSI Process Login - PRLI_REQUEST PrliPayload; // copy for BIG ENDIAN switch - LOGOUT_PAYLOAD *logo; - LOGOUT_PAYLOAD LogoutPayload; -// PRLO_REQUEST *prlo; -// PRLO_REQUEST PrloPayload; - REJECT_MESSAGE rjt, *prjt; - - memset( &PlogiPayload, 0, sizeof( PlogiPayload)); - plogi = &PlogiPayload; // load into stack buffer, - // then BIG-ENDIAN switch a copy to caller - - - switch( type ) // payload type can be ELS_PLOGI, ELS_PRLI, ADISC, ... - { - case ELS_FDISC: - case ELS_FLOGI: - case ELS_PLOGI_ACC: // FC-PH PORT Login Accept - case ELS_PLOGI: // FC-PH PORT Login - case ELS_PDISC: // FC-PH2 Port Discovery - same payload as ELS_PLOGI - plogi->login_cmd = LS_PLOGI; - if( type == ELS_PDISC) - plogi->login_cmd = LS_PDISC; - else if( type == ELS_PLOGI_ACC ) - plogi->login_cmd = LS_ACC; - - plogi->cmn_services.bb_credit = 0x00; - plogi->cmn_services.lowest_ver = fcChip->lowest_FCPH_ver; - plogi->cmn_services.highest_ver = fcChip->highest_FCPH_ver; - plogi->cmn_services.bb_rx_size = TACHLITE_TS_RX_SIZE; - plogi->cmn_services.common_features = CONTINUOSLY_INCREASING | - RANDOM_RELATIVE_OFFSET; - - // fill in with World Wide Name based Port Name - 8 UCHARs - // get from Tach registers WWN hi & lo - LoadWWN( fcChip, plogi->port_name, 0); - // fill in with World Wide Name based Node/Fabric Name - 8 UCHARs - // get from Tach registers WWN hi & lo - LoadWWN( fcChip, plogi->node_name, 1); - - // For Seagate Drives. - // - plogi->cmn_services.common_features |= 0x800; - plogi->cmn_services.rel_offset = 0xFE; - plogi->cmn_services.concurrent_seq = 1; - plogi->class1.service_options = 0x00; - plogi->class2.service_options = 0x00; - plogi->class3.service_options = CLASS_VALID; - plogi->class3.initiator_control = 0x00; - plogi->class3.rx_data_size = MAX_RX_PAYLOAD; - plogi->class3.recipient_control = - ERROR_DISCARD | ONE_CATEGORY_SEQUENCE; - plogi->class3.concurrent_sequences = 1; - plogi->class3.open_sequences = 1; - plogi->vendor_id[0] = 'C'; plogi->vendor_id[1] = 'Q'; - plogi->vendor_version[0] = 'C'; plogi->vendor_version[1] = 'Q'; - plogi->vendor_version[2] = ' '; plogi->vendor_version[3] = '0'; - plogi->vendor_version[4] = '0'; plogi->vendor_version[5] = '0'; - - - // FLOGI specific fields... (see FC-FLA, Rev 2.7, Aug 1999, sec 5.1) - if( (type == ELS_FLOGI) || (type == ELS_FDISC) ) - { - if( type == ELS_FLOGI ) - plogi->login_cmd = LS_FLOGI; - else - plogi->login_cmd = LS_FDISC; - - plogi->cmn_services.lowest_ver = 0x20; - plogi->cmn_services.common_features = 0x0800; - plogi->cmn_services.rel_offset = 0; - plogi->cmn_services.concurrent_seq = 0; - - plogi->class3.service_options = 0x8800; - plogi->class3.rx_data_size = 0; - plogi->class3.recipient_control = 0; - plogi->class3.concurrent_sequences = 0; - plogi->class3.open_sequences = 0; - } - - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&PlogiPayload, payload, sizeof(PlogiPayload)); - break; - - - case ELS_ACC: // generic Extended Link Service ACCept - plogi->login_cmd = LS_ACC; - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&PlogiPayload, payload, 4); - break; - - - - case ELS_SCR: // Fabric State Change Registration - { - SCR_PL scr; // state change registration - - memset( &scr, 0, sizeof(scr)); - - scr.command = LS_SCR; // 0x62000000 - // see FC-FLA, Rev 2.7, Table A.22 (pg 82) - scr.function = 3; // 1 = Events detected by Fabric - // 2 = N_Port detected registration - // 3 = Full registration - - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&scr, payload, sizeof(SCR_PL)); - } - - break; - - - case FCS_NSR: // Fabric Name Service Request - { - NSR_PL nsr; // Name Server Req. payload - - memset( &nsr, 0, sizeof(NSR_PL)); - - // see Brocade Fabric Programming Guide, - // Rev 1.3, pg 4-44 - nsr.CT_Rev = 0x01000000; - nsr.FCS_Type = 0xFC020000; - nsr.Command_code = 0x01710000; - nsr.FCP = 8; - - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&nsr, payload, sizeof(NSR_PL)); - } - - break; - - - - - case ELS_LOGO: // FC-PH PORT LogOut - logo = &LogoutPayload; // load into stack buffer, - // then BIG-ENDIAN switch a copy to caller - logo->cmd = LS_LOGO; - // load the 3 UCHARs of the node name - // (if private loop, upper two UCHARs 0) - logo->reserved = 0; - - logo->n_port_identifier[0] = (UCHAR)(fcChip->Registers.my_al_pa); - logo->n_port_identifier[1] = - (UCHAR)(fcChip->Registers.my_al_pa>>8); - logo->n_port_identifier[2] = - (UCHAR)(fcChip->Registers.my_al_pa>>16); - // fill in with World Wide Name based Port Name - 8 UCHARs - // get from Tach registers WWN hi & lo - LoadWWN( fcChip, logo->port_name, 0); - - BigEndianSwap( (UCHAR*)&LogoutPayload, - payload, sizeof(LogoutPayload) ); // 16 UCHAR struct - break; - - - case ELS_LOGO_ACC: // Logout Accept (FH-PH pg 149, table 74) - logo = &LogoutPayload; // load into stack buffer, - // then BIG-ENDIAN switch a copy to caller - logo->cmd = LS_ACC; - BigEndianSwap( (UCHAR*)&LogoutPayload, payload, 4 ); // 4 UCHAR cmnd - break; - - - case ELS_RJT: // ELS_RJT link service reject (FH-PH pg 155) - - prjt = (REJECT_MESSAGE*)payload; // pick up passed data - rjt.command_code = ELS_RJT; - // reverse fields, because of Swap that follows... - rjt.vendor = prjt->reserved; // vendor specific - rjt.explain = prjt->reason; // - rjt.reason = prjt->explain; // - rjt.reserved = prjt->vendor; // - // BIG-ENDIAN switch a copy to caller - BigEndianSwap( (UCHAR*)&rjt, payload, 8 ); // 8 UCHAR cmnd - break; - - - - - - case ELS_PRLI_ACC: // Process Login ACCept - case ELS_PRLI: // Process Login - case ELS_PRLO: // Process Logout - memset( &PrliPayload, 0, sizeof( PrliPayload)); - prli = &PrliPayload; // load into stack buffer, - - if( type == ELS_PRLI ) - prli->cmd = 0x20; // Login - else if( type == ELS_PRLO ) - prli->cmd = 0x21; // Logout - else if( type == ELS_PRLI_ACC ) - { - prli->cmd = 0x02; // Login ACCept - prli->valid = REQUEST_EXECUTED; - } - - - prli->valid |= SCSI_FCP | ESTABLISH_PAIR; - prli->fcp_info = READ_XFER_RDY; - prli->page_length = 0x10; - prli->payload_length = 20; - // Can be initiator AND target - - if( fcChip->Options.initiator ) - prli->fcp_info |= INITIATOR_FUNCTION; - if( fcChip->Options.target ) - prli->fcp_info |= TARGET_FUNCTION; - - BigEndianSwap( (UCHAR*)&PrliPayload, payload, prli->payload_length); - break; - - - - default: // no can do - programming error - printk(" BuildLinkServicePayload unknown!\n"); - break; - } -} - -// loads 8 UCHARs for PORT name or NODE name base on -// controller's WWN. -void LoadWWN( PTACHYON fcChip, UCHAR* dest, UCHAR type) -{ - UCHAR* bPtr, i; - - switch( type ) - { - case 0: // Port_Name - bPtr = (UCHAR*)&fcChip->Registers.wwn_hi; - for( i =0; i<4; i++) - dest[i] = *bPtr++; - bPtr = (UCHAR*)&fcChip->Registers.wwn_lo; - for( i =4; i<8; i++) - dest[i] = *bPtr++; - break; - case 1: // Node/Fabric _Name - bPtr = (UCHAR*)&fcChip->Registers.wwn_hi; - for( i =0; i<4; i++) - dest[i] = *bPtr++; - bPtr = (UCHAR*)&fcChip->Registers.wwn_lo; - for( i =4; i<8; i++) - dest[i] = *bPtr++; - break; - } - -} - - - -// We check the Port Login payload for required values. Note that -// ELS_PLOGI and ELS_PDISC (Port DISCover) use the same payload. - - -int verify_PLOGI( PTACHYON fcChip, - TachFCHDR_GCMND* fchs, - ULONG* reject_explain) -{ - LOGIN_PAYLOAD login; - - // source, dest, len (should be mult. of 4) - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&login, sizeof(login)); - - // check FC version - // if other port's highest supported version - // is less than our lowest, and - // if other port's lowest - if( login.cmn_services.highest_ver < fcChip->lowest_FCPH_ver || - login.cmn_services.lowest_ver > fcChip->highest_FCPH_ver ) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, OPTIONS_ERROR); - return LOGICAL_ERROR; - } - - // Receive Data Field Size must be >=128 - // per FC-PH - if (login.cmn_services.bb_rx_size < 128) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, DATA_FIELD_SIZE_ERROR); - return LOGICAL_ERROR; - } - - // Only check Class 3 params - if( login.class3.service_options & CLASS_VALID) - { - if (login.class3.rx_data_size < 128) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, INVALID_CSP); - return LOGICAL_ERROR; - } - if( login.class3.initiator_control & XID_REQUIRED) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, INITIATOR_CTL_ERROR); - return LOGICAL_ERROR; - } - } - return 0; // success -} - - - - -int verify_PRLI( TachFCHDR_GCMND* fchs, ULONG* reject_explain) -{ - PRLI_REQUEST prli; // buffer for BIG ENDIAN - - // source, dest, len (should be mult. of 4) - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&prli, sizeof(prli)); - - if( prli.fcp_info == 0 ) // i.e., not target or initiator? - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, OPTIONS_ERROR); - return LOGICAL_ERROR; - } - - return 0; // success -} - - -// SWAP UCHARs as required by Fibre Channel (i.e. BIG ENDIAN) -// INPUTS: -// source - ptr to LITTLE ENDIAN ULONGS -// cnt - number of UCHARs to switch (should be mult. of ULONG) -// OUTPUTS: -// dest - ptr to BIG ENDIAN copy -// RETURN: -// none -// -void BigEndianSwap( UCHAR *source, UCHAR *dest, USHORT cnt) -{ - int i,j; - - source+=3; // start at MSB of 1st ULONG - for( j=0; j < cnt; j+=4, source+=4, dest+=4) // every ULONG - { - for( i=0; i<4; i++) // every UCHAR in ULONG - *(dest+i) = *(source-i); - } -} - - - - -// Build FC Exchanges............ - -static void buildFCPstatus( - PTACHYON fcChip, - ULONG ExchangeID); - -static LONG FindFreeExchange( PTACHYON fcChip, ULONG type ); - -static ULONG build_SEST_sgList( - struct pci_dev *pcidev, - ULONG *SESTalPairStart, - Scsi_Cmnd *Cmnd, - ULONG *sgPairs, - PSGPAGES *sgPages_head // link list of TL Ext. S/G pages from O/S Pool -); - -static int build_FCP_payload( Scsi_Cmnd *Cmnd, - UCHAR* payload, ULONG type, ULONG fcp_dl ); - - -/* - IRB - ERQ __________________ - | | / | Req_A_SFS_Len | ____________________ - |----------| / | Req_A_SFS_Addr |------->| Reserved | - | IRB | / | Req_A_D_ID | | SOF EOF TimeStamp | - |-----------/ | Req_A_SEST_Index |-+ | R_CTL | D_ID | - | IRB | | Req_B... | | | CS_CTL| S_ID | - |-----------\ | | | | TYPE | F_CTL | - | IRB | \ | | | | SEQ_ID | SEQ_CNT | - |----------- \ | | +-->+--| OX_ID | RX_ID | - | | \ |__________________| | | RO | - | | pl (payload/cmnd) | - | | ..... | - | |___________________| - | - | -+-------------------------------------------+ -| -| -| e.g. IWE -| SEST __________________ for FCP_DATA -| | | / | | Hdr_Len | ____________________ -| |----------| / | Hdr_Addr_Addr |------->| Reserved | -| | [0] | / |Remote_ID| RSP_Len| | SOF EOF TimeStamp | -| |-----------/ | RSP_Addr |---+ | R_CTL | D_ID | -+-> [1] | | | Buff_Off | | | CS_CTL| S_ID | - |-----------\ |BuffIndex| Link | | | TYPE | F_CTL | - | [2] | \ | Rsvd | RX_ID | | | SEQ_ID | SEQ_CNT | - |----------- \ | Data_Len | | | OX_ID | RX_ID | - | ... | \ | Exp_RO | | | RO | - |----------| | Exp_Byte_Cnt | | |___________________| - | SEST_LEN | +--| Len | | - |__________| | | Address | | - | | ... | | for FCP_RSP - | |__________________| | ____________________ - | +----| Reserved | - | | SOF EOF TimeStamp | - | | R_CTL | D_ID | - | | CS_CTL| S_ID | - +--- local or extended | .... | - scatter/gather lists - defining upper-layer - data (e.g. from user's App) - - -*/ -// All TachLite commands must start with a SFS (Single Frame Sequence) -// command. In the simplest case (a NOP Basic Link command), -// only one frame header and ERQ entry is required. The most complex -// case is the SCSI assisted command, which requires an ERQ entry, -// SEST entry, and several frame headers and data buffers all -// logically linked together. -// Inputs: -// cpqfcHBAdata - controller struct -// type - PLOGI, SCSI_IWE, etc. -// InFCHS - Incoming Tachlite FCHS which prompted this exchange -// (only s_id set if we are originating) -// Data - PVOID to data struct consistent with "type" -// fcExchangeIndex - pointer to OX/RD ID value of built exchange -// Return: -// fcExchangeIndex - OX/RD ID value if successful -// 0 - success -// INVALID_ARGS - NULL/ invalid passed args -// BAD_ALPA - Bad source al_pa address -// LNKDWN_OSLS - Link Down (according to this controller) -// OUTQUE_FULL - Outbound Que full -// DRIVERQ_FULL - controller's Exchange array full -// SEST_FULL - SEST table full -// -// Remarks: -// Psuedo code: -// Check for NULL pointers / bad args -// Build outgoing FCHS - the header/payload struct -// Build IRB (for ERQ entry) -// if SCSI command, build SEST entry (e.g. IWE, TRE,...) -// return success - -//sbuildex -ULONG cpqfcTSBuildExchange( - CPQFCHBA *cpqfcHBAdata, - ULONG type, // e.g. PLOGI - TachFCHDR_GCMND* InFCHS, // incoming FCHS - void *Data, // the CDB, scatter/gather, etc. - LONG *fcExchangeIndex ) // points to allocated exchange, -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ulStatus = 0; // assume OK - USHORT ox_ID, rx_ID=0xFFFF; - ULONG SfsLen=0L; - TachLiteIRB* pIRB; - IRBflags IRB_flags; - UCHAR *pIRB_flags = (UCHAR*)&IRB_flags; - TachFCHDR_GCMND* CMDfchs; - TachFCHDR* dataHDR; // 32 byte HEADER ONLY FCP-DATA buffer - TachFCHDR_RSP* rspHDR; // 32 byte header + RSP payload - Scsi_Cmnd *Cmnd = (Scsi_Cmnd*)Data; // Linux Scsi CDB, S/G, ... - TachLiteIWE* pIWE; - TachLiteIRE* pIRE; - TachLiteTWE* pTWE; - TachLiteTRE* pTRE; - ULONG fcp_dl; // total byte length of DATA transferred - ULONG fl; // frame length (FC frame size, 128, 256, 512, 1024) - ULONG sgPairs; // number of valid scatter/gather pairs - int FCP_SCSI_command; - BA_ACC_PAYLOAD *ba_acc; - BA_RJT_PAYLOAD *ba_rjt; - - // check passed ARGS - if( !fcChip->ERQ ) // NULL ptr means uninitialized Tachlite chip - return INVALID_ARGS; - - - if( type == SCSI_IRE || - type == SCSI_TRE || - type == SCSI_IWE || - type == SCSI_TWE) - FCP_SCSI_command = 1; - - else - FCP_SCSI_command = 0; - - - // for commands that pass payload data (e.g. SCSI write) - // examine command struct - verify that the - // length of s/g buffers is adequate for total payload - // length (end of list is NULL address) - - if( FCP_SCSI_command ) - { - if( Data ) // must have data descriptor (S/G list -- at least - // one address with at least 1 byte of data) - { - // something to do (later)? - } - - else - return INVALID_ARGS; // invalid DATA ptr - } - - - - // we can build an Exchange for later Queuing (on the TL chip) - // if an empty slot is available in the DevExt for this controller - // look for available Exchange slot... - - if( type != FCP_RESPONSE && - type != BLS_ABTS && - type != BLS_ABTS_ACC ) // already have Exchange slot! - *fcExchangeIndex = FindFreeExchange( fcChip, type ); - - if( *fcExchangeIndex != -1 ) // Exchange is available? - { - // assign tmp ptr (shorthand) - CMDfchs = &Exchanges->fcExchange[ *fcExchangeIndex].fchs; - - if( Cmnd != NULL ) // (necessary for ABTS cases) - { - Exchanges->fcExchange[ *fcExchangeIndex].Cmnd = Cmnd; // Linux Scsi - Exchanges->fcExchange[ *fcExchangeIndex].pLoggedInPort = - fcFindLoggedInPort( fcChip, - Exchanges->fcExchange[ *fcExchangeIndex].Cmnd, // find Scsi Nexus - 0, // DON'T search linked list for FC port id - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - } - - - // Build the command frame header (& data) according - // to command type - - // fields common for all SFS frame types - CMDfchs->reserved = 0L; // must clear - CMDfchs->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; LCr=0, no TS - - // get the destination port_id from incoming FCHS - // (initialized before calling if we're Originator) - // Frame goes to port it was from - the source_id - - CMDfchs->d_id = InFCHS->s_id &0xFFFFFF; // destination (add R_CTL later) - CMDfchs->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - - - // now enter command-specific fields - switch( type ) - { - - case BLS_NOP: // FC defined basic link service command NO-OP - // ensure unique X_IDs! (use tracking function) - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32L; // add len to LSB (header only - no payload) - - // TYPE[31-24] 00 Basic Link Service - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - CMDfchs->d_id |= 0x80000000L; // R_CTL = 80 for NOP (Basic Link Ser.) - CMDfchs->f_ctl = 0x00310000L; // xchng originator, 1st seq,.... - CMDfchs->seq_cnt = 0x0L; - CMDfchs->ox_rx_id = 0xFFFF; // RX_ID for now; OX_ID on start - CMDfchs->ro = 0x0L; // relative offset (n/a) - CMDfchs->pl[0] = 0xaabbccddL; // words 8-15 frame data payload (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 1; // seconds - // (NOP should complete ~instantly) - break; - - - - - case BLS_ABTS_ACC: // Abort Sequence ACCept - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32 + 12; // add len to LSB (header + 3 DWORD payload) - - CMDfchs->d_id |= 0x84000000L; // R_CTL = 84 for BASIC ACCept - // TYPE[31-24] 00 Basic Link Service - // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. - CMDfchs->f_ctl = 0x00910000L; // xchnge responder, last seq, xfer SI - // CMDfchs->seq_id & count might be set from DataHdr? - CMDfchs->ro = 0x0L; // relative offset (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 5; // seconds - // (Timeout in case of weird error) - - // now set the ACCept payload... - ba_acc = (BA_ACC_PAYLOAD*)&CMDfchs->pl[0]; - memset( ba_acc, 0, sizeof( BA_ACC_PAYLOAD)); - // Since PLDA requires (only) entire Exchange aborts, we don't need - // to worry about what the last sequence was. - - // We expect that a "target" task is accepting the abort, so we - // can use the OX/RX ID pair - ba_acc->ox_rx_id = CMDfchs->ox_rx_id; - - // source, dest, #bytes - BigEndianSwap((UCHAR *)&CMDfchs->ox_rx_id, (UCHAR *)&ba_acc->ox_rx_id, 4); - - ba_acc->low_seq_cnt = 0; - ba_acc->high_seq_cnt = 0xFFFF; - - - break; - - - case BLS_ABTS_RJT: // Abort Sequence ACCept - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32 + 12; // add len to LSB (header + 3 DWORD payload) - - CMDfchs->d_id |= 0x85000000L; // R_CTL = 85 for BASIC ReJecT - // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. - // TYPE[31-24] 00 Basic Link Service - CMDfchs->f_ctl = 0x00910000L; // xchnge responder, last seq, xfer SI - // CMDfchs->seq_id & count might be set from DataHdr? - CMDfchs->ro = 0x0L; // relative offset (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 5; // seconds - // (Timeout in case of weird error) - - CMDfchs->ox_rx_id = InFCHS->ox_rx_id; // copy from sender! - - // now set the ReJecT payload... - ba_rjt = (BA_RJT_PAYLOAD*)&CMDfchs->pl[0]; - memset( ba_rjt, 0, sizeof( BA_RJT_PAYLOAD)); - - // We expect that a "target" task couldn't find the Exhange in the - // array of active exchanges, so we use a new LinkService X_ID. - // See Reject payload description in FC-PH (Rev 4.3), pg. 140 - ba_rjt->reason_code = 0x09; // "unable to perform command request" - ba_rjt->reason_explain = 0x03; // invalid OX/RX ID pair - - - break; - - - case BLS_ABTS: // FC defined basic link service command ABTS - // Abort Sequence - - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32L; // add len to LSB (header only - no payload) - - // TYPE[31-24] 00 Basic Link Service - // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. - CMDfchs->d_id |= 0x81000000L; // R_CTL = 81 for ABTS - CMDfchs->f_ctl = 0x00110000L; // xchnge originator, last seq, xfer SI - // CMDfchs->seq_id & count might be set from DataHdr? - CMDfchs->ro = 0x0L; // relative offset (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds - // (ABTS must timeout when responder is gone) - break; - - - - case FCS_NSR: // Fabric Name Service Request - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 2; - - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds - // OX_ID, linked to Driver Transaction ID - // (fix-up at Queing time) - CMDfchs->ox_rx_id = 0xFFFF; // RX_ID - Responder (target) to modify - // OX_ID set at ERQueing time - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += (32L + sizeof(NSR_PL)); // add len (header & NSR payload) - - CMDfchs->d_id |= 0x02000000L; // R_CTL = 02 for - - // Name Service Request: Unsolicited - // TYPE[31-24] 01 Extended Link Service - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - CMDfchs->f_ctl = 0x20210000L; - // OX_ID will be fixed-up at Tachyon enqueing time - CMDfchs->seq_cnt = 0; // seq ID, DF_ctl, seq cnt - CMDfchs->ro = 0x0L; // relative offset (n/a) - - BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); - - - - - - - break; - - - - - case ELS_PLOGI: // FC-PH extended link service command Port Login - // (May, 2000) - // NOTE! This special case facilitates SANMark testing. The SANMark - // test script for initialization-timeout.fcal.SANMark-1.fc - // "eats" the OPN() primitive without issuing an R_RDY, causing - // Tachyon to report LST (loop state timeout), which causes a - // LIP. To avoid this, simply send out the frame (i.e. assuming a - // buffer credit of 1) without waiting for R_RDY. Many FC devices - // (other than Tachyon) have been doing this for years. We don't - // ever want to do this for non-Link Service frames unless the - // other device really did report non-zero login BB credit (i.e. - // in the PLOGI ACCept frame). -// CMDfchs->sof_eof |= 0x00000400L; // LCr=1 - - case ELS_FDISC: // Fabric Discovery (Login) - case ELS_FLOGI: // Fabric Login - case ELS_SCR: // Fabric State Change Registration - case ELS_LOGO: // FC-PH extended link service command Port Logout - case ELS_PDISC: // FC-PH extended link service cmnd Port Discovery - case ELS_PRLI: // FC-PH extended link service cmnd Process Login - - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 2; - - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds - // OX_ID, linked to Driver Transaction ID - // (fix-up at Queing time) - CMDfchs->ox_rx_id = 0xFFFF; // RX_ID - Responder (target) to modify - // OX_ID set at ERQueing time - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - if( type == ELS_LOGO ) - SfsLen += (32L + 16L); // add len (header & PLOGI payload) - else if( type == ELS_PRLI ) - SfsLen += (32L + 20L); // add len (header & PRLI payload) - else if( type == ELS_SCR ) - SfsLen += (32L + sizeof(SCR_PL)); // add len (header & SCR payload) - else - SfsLen += (32L + 116L); // add len (header & PLOGI payload) - - CMDfchs->d_id |= 0x22000000L; // R_CTL = 22 for - - // Extended Link_Data: Unsolicited Control - // TYPE[31-24] 01 Extended Link Service - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - CMDfchs->f_ctl = 0x01210000L; - // OX_ID will be fixed-up at Tachyon enqueing time - CMDfchs->seq_cnt = 0; // seq ID, DF_ctl, seq cnt - CMDfchs->ro = 0x0L; // relative offset (n/a) - - BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); - - break; - - - - case ELS_LOGO_ACC: // FC-PH extended link service logout accept - case ELS_RJT: // extended link service reject (add reason) - case ELS_ACC: // ext. link service generic accept - case ELS_PLOGI_ACC:// ext. link service login accept (PLOGI or PDISC) - case ELS_PRLI_ACC: // ext. link service process login accept - - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 1; // assume done - // ensure unique X_IDs! (use tracking function) - // OX_ID from initiator cmd - ox_ID = (USHORT)(InFCHS->ox_rx_id >> 16); - rx_ID = 0xFFFF; // RX_ID, linked to Driver Exchange ID - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - if( type == ELS_RJT ) - { - SfsLen += (32L + 8L); // add len (header + payload) - - // ELS_RJT reason codes (utilize unused "reserved" field) - CMDfchs->pl[0] = 1; - CMDfchs->pl[1] = InFCHS->reserved; - - } - else if( (type == ELS_LOGO_ACC) || (type == ELS_ACC) ) - SfsLen += (32L + 4L); // add len (header + payload) - else if( type == ELS_PLOGI_ACC ) - SfsLen += (32L + 116L); // add len (header + payload) - else if( type == ELS_PRLI_ACC ) - SfsLen += (32L + 20L); // add len (header + payload) - - CMDfchs->d_id |= 0x23000000L; // R_CTL = 23 for - - // Extended Link_Data: Control Reply - // TYPE[31-24] 01 Extended Link Service - // f_ctl[23:0] exchg responder, last seq, e_s, tsi - CMDfchs->f_ctl = 0x01990000L; - CMDfchs->seq_cnt = 0x0L; - CMDfchs->ox_rx_id = 0L; // clear - CMDfchs->ox_rx_id = ox_ID; // load upper 16 bits - CMDfchs->ox_rx_id <<= 16; // shift them - - CMDfchs->ro = 0x0L; // relative offset (n/a) - - BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); - - break; - - - // Fibre Channel SCSI 'originator' sequences... - // (originator means 'initiator' in FCP-SCSI) - - case SCSI_IWE: // TachLite Initiator Write Entry - { - PFC_LOGGEDIN_PORT pLoggedInPort = - Exchanges->fcExchange[ *fcExchangeIndex].pLoggedInPort; - - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 1; - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 7; // FC2 timeout - - // first, build FCP_CMND - // unique X_ID fix-ups in StartExchange - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS FCP-CMND (not SEST index) - - // NOTE: unlike FC LinkService login frames, normal - // SCSI commands are sent without outgoing verification - IRB_flags.DCM = 1; // Disable completion message for Cmnd frame - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 64L; // add len to LSB (header & CMND payload) - - CMDfchs->d_id |= (0x06000000L); // R_CTL = 6 for command - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - // valid RO - CMDfchs->f_ctl = 0x08210008L; - CMDfchs->seq_cnt = 0x0L; - CMDfchs->ox_rx_id = 0L; // clear for now (-or- in later) - CMDfchs->ro = 0x0L; // relative offset (n/a) - - // now, fill out FCP-DATA header - // (use buffer inside SEST object) - dataHDR = &fcChip->SEST->DataHDR[ *fcExchangeIndex ]; - dataHDR->reserved = 0L; // must clear - dataHDR->sof_eof = 0x75002000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS - dataHDR->d_id = (InFCHS->s_id | 0x01000000L); // R_CTL= FCP_DATA - dataHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] xfer S.I.| valid RO - dataHDR->f_ctl = 0x08010008L; - dataHDR->seq_cnt = 0x02000000L; // sequence ID: df_ctl : seqence count - dataHDR->ox_rx_id = 0L; // clear; fix-up dataHDR fields later - dataHDR->ro = 0x0L; // relative offset (n/a) - - // Now setup the SEST entry - pIWE = &fcChip->SEST->u[ *fcExchangeIndex ].IWE; - - // fill out the IWE: - - // VALid entry:Dir outbound:DCM:enable CM:enal INT: FC frame len - pIWE->Hdr_Len = 0x8e000020L; // data frame Len always 32 bytes - - - // from login parameters with other port, what's the largest frame - // we can send? - if( pLoggedInPort == NULL) - { - ulStatus = INVALID_ARGS; // failed! give up - break; - } - if( pLoggedInPort->rx_data_size >= 2048) - fl = 0x00020000; // 2048 code (only support 1024!) - else if( pLoggedInPort->rx_data_size >= 1024) - fl = 0x00020000; // 1024 code - else if( pLoggedInPort->rx_data_size >= 512) - fl = 0x00010000; // 512 code - else - fl = 0; // 128 bytes -- should never happen - - - pIWE->Hdr_Len |= fl; // add xmit FC frame len for data phase - pIWE->Hdr_Addr = fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->DataHDR[*fcExchangeIndex] - - (unsigned long)fcChip->SEST); - - pIWE->RSP_Len = sizeof(TachFCHDR_RSP) ; // hdr+data (recv'd RSP frame) - pIWE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - - memset( &fcChip->SEST->RspHDR[ *fcExchangeIndex].pl, 0, - sizeof( FCP_STATUS_RESPONSE) ); // clear out previous status - - pIWE->RSP_Addr = fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->RspHDR[*fcExchangeIndex] - - (unsigned long)fcChip->SEST); - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pIWE->GLen1, - Cmnd, // S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - if( !fcp_dl ) // error building S/G list? - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - - // Now that we know total data length in - // the passed S/G buffer, set FCP CMND frame - build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); - - - - if( sgPairs > 3 ) // need extended s/g list - pIWE->Buff_Off = 0x78000000L; // extended data | (no offset) - else // local data pointers (in SEST) - pIWE->Buff_Off = 0xf8000000L; // local data | (no offset) - - // ULONG 5 - pIWE->Link = 0x0000ffffL; // Buff_Index | Link - - pIWE->RX_ID = 0x0L; // DWord 6: RX_ID set by target XFER_RDY - - // DWord 7 - pIWE->Data_Len = 0L; // TL enters rcv'd XFER_RDY BURST_LEN - pIWE->Exp_RO = 0L; // DWord 8 - // DWord 9 - pIWE->Exp_Byte_Cnt = fcp_dl; // sum of gather buffers - } - break; - - - - - - case SCSI_IRE: // TachLite Initiator Read Entry - - if( Cmnd->timeout != 0) - { -// printk("Cmnd->timeout %d\n", Cmnd->timeout); - // per Linux Scsi - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = Cmnd->timeout; - } - else // use our best guess, based on FC & device - { - - if( Cmnd->SCp.Message == 1 ) // Tape device? (from INQUIRY) - { - // turn off our timeouts (for now...) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 0xFFFFFFFF; - } - else - { - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 1; - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 7; // per SCSI req. - } - } - - - // first, build FCP_CMND - - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS FCP-CMND (not SEST index) - // NOTE: unlike FC LinkService login frames, - // normal SCSI commands are sent "open loop" - IRB_flags.DCM = 1; // Disable completion message for Cmnd frame - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 64L; // add len to LSB (header & CMND payload) - - CMDfchs->d_id |= (0x06000000L); // R_CTL = 6 for command - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - // valid RO - CMDfchs->f_ctl = 0x08210008L; - CMDfchs->seq_cnt = 0x0L; - // x_ID & data direction bit set later - CMDfchs->ox_rx_id = 0xFFFF; // clear - CMDfchs->ro = 0x0L; // relative offset (n/a) - - - - // Now setup the SEST entry - pIRE = &fcChip->SEST->u[ *fcExchangeIndex ].IRE; - - // fill out the IRE: - // VALid entry:Dir outbound:enable CM:enal INT: - pIRE->Seq_Accum = 0xCE000000L; // VAL,DIR inbound,DCM| INI,DAT,RSP - - pIRE->reserved = 0L; - pIRE->RSP_Len = sizeof(TachFCHDR_RSP) ; // hdr+data (recv'd RSP frame) - pIRE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - - pIRE->RSP_Addr = fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->RspHDR[*fcExchangeIndex] - - (unsigned long)fcChip->SEST); - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pIRE->SLen1, - Cmnd, // SCSI command Data desc. with S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - - if( !fcp_dl ) // error building S/G list? - { - // It is permissible to have a ZERO LENGTH Read command. - // If there is the case, simply set fcp_dl (and Exp_Byte_Cnt) - // to 0 and continue. - if( Cmnd->request_bufflen == 0 ) - { - fcp_dl = 0; // no FC DATA frames expected - - } - else - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - } - - // now that we know the S/G length, build CMND payload - build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); - - - if( sgPairs > 3 ) // need extended s/g list - pIRE->Buff_Off = 0x00000000; // DWord 4: extended s/g list, no offset - else - pIRE->Buff_Off = 0x80000000; // local data, no offset - - pIRE->Buff_Index = 0x0L; // DWord 5: Buff_Index | Reserved - - pIRE->Exp_RO = 0x0L; // DWord 6: Expected Rel. Offset - - pIRE->Byte_Count = 0; // DWord 7: filled in by TL on err - pIRE->reserved_ = 0; // DWord 8: reserved - // NOTE: 0 length READ is OK. - pIRE->Exp_Byte_Cnt = fcp_dl;// DWord 9: sum of scatter buffers - - break; - - - - - // Fibre Channel SCSI 'responder' sequences... - // (originator means 'target' in FCP-SCSI) - case SCSI_TWE: // TachLite Target Write Entry - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 10; // per SCSI req. - - // first, build FCP_CMND - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (XFER_RDY) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += (32L + 12L);// add SFS len (header & XFER_RDY payload) - - CMDfchs->d_id |= (0x05000000L); // R_CTL = 5 for XFER_RDY - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg responder, 1st seq, xfer S.I. - // valid RO - CMDfchs->f_ctl = 0x08810008L; - CMDfchs->seq_cnt = 0x01000000; // sequence ID: df_ctl: sequence count - // use originator (other port's) OX_ID - CMDfchs->ox_rx_id = InFCHS->ox_rx_id; // we want upper 16 bits - CMDfchs->ro = 0x0L; // relative offset (n/a) - - // now, fill out FCP-RSP header - // (use buffer inside SEST object) - - rspHDR = &fcChip->SEST->RspHDR[ *fcExchangeIndex ]; - rspHDR->reserved = 0L; // must clear - rspHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS - rspHDR->d_id = (InFCHS->s_id | 0x07000000L); // R_CTL= FCP_RSP - rspHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] responder|last seq| xfer S.I. - rspHDR->f_ctl = 0x08910000L; - rspHDR->seq_cnt = 0x03000000; // sequence ID - rspHDR->ox_rx_id = InFCHS->ox_rx_id; // gives us OX_ID - rspHDR->ro = 0x0L; // relative offset (n/a) - - - // Now setup the SEST entry - - pTWE = &fcChip->SEST->u[ *fcExchangeIndex ].TWE; - - // fill out the TWE: - - // VALid entry:Dir outbound:enable CM:enal INT: - pTWE->Seq_Accum = 0xC4000000L; // upper word flags - pTWE->reserved = 0L; - pTWE->Remote_Node_ID = 0L; // no more auto RSP frame! (TL/TS change) - pTWE->Remote_Node_ID |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pTWE->SLen1, - Cmnd, // S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - - if( !fcp_dl ) // error building S/G list? - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - - // now that we know the S/G length, build CMND payload - build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); - - - if( sgPairs > 3 ) // need extended s/g list - pTWE->Buff_Off = 0x00000000; // extended s/g list, no offset - else - pTWE->Buff_Off = 0x80000000; // local data, no offset - - pTWE->Buff_Index = 0; // Buff_Index | Link - pTWE->Exp_RO = 0; - pTWE->Byte_Count = 0; // filled in by TL on err - pTWE->reserved_ = 0; - pTWE->Exp_Byte_Cnt = fcp_dl;// sum of scatter buffers - - break; - - - - - - - case SCSI_TRE: // TachLite Target Read Entry - - // It doesn't make much sense for us to "time-out" a READ, - // but we'll use it for design consistency and internal error recovery. - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 10; // per SCSI req. - - // I/O request block settings... - *pIRB_flags = 0; // clear IRB flags - // check PRLI (process login) info - // to see if Initiator Requires XFER_RDY - // if not, don't send one! - // { PRLI check...} - IRB_flags.SFA = 0; // don't send XFER_RDY - start data - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += (32L + 12L);// add SFS len (header & XFER_RDY payload) - - - - // now, fill out FCP-DATA header - // (use buffer inside SEST object) - dataHDR = &fcChip->SEST->DataHDR[ *fcExchangeIndex ]; - - dataHDR->reserved = 0L; // must clear - dataHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS,noLCr,no TS - dataHDR->d_id = (InFCHS->s_id | 0x01000000L); // R_CTL= FCP_DATA - dataHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg responder, not 1st seq, xfer S.I. - // valid RO - dataHDR->f_ctl = 0x08810008L; - dataHDR->seq_cnt = 0x01000000; // sequence ID (no XRDY) - dataHDR->ox_rx_id = InFCHS->ox_rx_id & 0xFFFF0000; // we want upper 16 bits - dataHDR->ro = 0x0L; // relative offset (n/a) - - // now, fill out FCP-RSP header - // (use buffer inside SEST object) - rspHDR = &fcChip->SEST->RspHDR[ *fcExchangeIndex ]; - - rspHDR->reserved = 0L; // must clear - rspHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS - rspHDR->d_id = (InFCHS->s_id | 0x07000000L); // R_CTL= FCP_RSP - rspHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] responder|last seq| xfer S.I. - rspHDR->f_ctl = 0x08910000L; - rspHDR->seq_cnt = 0x02000000; // sequence ID: df_ctl: sequence count - - rspHDR->ro = 0x0L; // relative offset (n/a) - - - // Now setup the SEST entry - pTRE = &fcChip->SEST->u[ *fcExchangeIndex ].TRE; - - - // VALid entry:Dir outbound:enable CM:enal INT: - pTRE->Hdr_Len = 0x86010020L; // data frame Len always 32 bytes - pTRE->Hdr_Addr = // bus address of dataHDR; - fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->DataHDR[ *fcExchangeIndex ] - - (unsigned long)fcChip->SEST); - - pTRE->RSP_Len = 64L; // hdr+data (TL assisted RSP frame) - pTRE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - pTRE->RSP_Addr = // bus address of rspHDR - fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->RspHDR[ *fcExchangeIndex ] - - (unsigned long)fcChip->SEST); - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pTRE->GLen1, - Cmnd, // S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - - if( !fcp_dl ) // error building S/G list? - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - - // no payload or command to build -- READ doesn't need XRDY - - - if( sgPairs > 3 ) // need extended s/g list - pTRE->Buff_Off = 0x78000000L; // extended data | (no offset) - else // local data pointers (in SEST) - pTRE->Buff_Off = 0xf8000000L; // local data | (no offset) - - // ULONG 5 - pTRE->Buff_Index = 0L; // Buff_Index | reserved - pTRE->reserved = 0x0L; // DWord 6 - - // DWord 7: NOTE: zero length will - // hang TachLite! - pTRE->Data_Len = fcp_dl; // e.g. sum of scatter buffers - - pTRE->reserved_ = 0L; // DWord 8 - pTRE->reserved__ = 0L; // DWord 9 - - break; - - - - - - - - case FCP_RESPONSE: - // Target response frame: this sequence uses an OX/RX ID - // pair from a completed SEST exchange. We built most - // of the response frame when we created the TWE/TRE. - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (RSP) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += sizeof(TachFCHDR_RSP);// add SFS len (header & RSP payload) - - - Exchanges->fcExchange[ *fcExchangeIndex].type = - FCP_RESPONSE; // change Exchange type to "response" phase - - // take advantage of prior knowledge of OX/RX_ID pair from - // previous XFER outbound frame (still in fchs of exchange) - fcChip->SEST->RspHDR[ *fcExchangeIndex ].ox_rx_id = - CMDfchs->ox_rx_id; - - // Check the status of the DATA phase of the exchange so we can report - // status to the initiator - buildFCPstatus( fcChip, *fcExchangeIndex); // set RSP payload fields - - memcpy( - CMDfchs, // re-use same XFER fchs for Response frame - &fcChip->SEST->RspHDR[ *fcExchangeIndex ], - sizeof( TachFCHDR_RSP )); - - - break; - - default: - printk("cpqfcTS: don't know how to build FC type: %Xh(%d)\n", type,type); - break; - - } - - - - if( !ulStatus) // no errors above? - { - // FCHS is built; now build IRB - - // link the just built FCHS (the "command") to the IRB entry - // for this Exchange. - pIRB = &Exchanges->fcExchange[ *fcExchangeIndex].IRB; - - // len & flags according to command type above - pIRB->Req_A_SFS_Len = SfsLen; // includes IRB flags & len - pIRB->Req_A_SFS_Addr = // TL needs physical addr of frame to send - fcChip->exch_dma_handle + (unsigned long)CMDfchs - - (unsigned long)Exchanges; - - pIRB->Req_A_SFS_D_ID = CMDfchs->d_id << 8; // Dest_ID must be consistent! - - // Exchange is complete except for "fix-up" fields to be set - // at Tachyon Queuing time: - // IRB->Req_A_Trans_ID (OX_ID/ RX_ID): - // for SEST entry, lower bits correspond to actual FC Exchange ID - // fchs->OX_ID or RX_ID - } - else - { -#ifdef DBG - printk( "FC Error: SEST build Pool Allocation failed\n"); -#endif - // return resources... - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, *fcExchangeIndex); // SEST build failed - } - } - else // no Exchanges available - { - ulStatus = SEST_FULL; - printk( "FC Error: no fcExchanges available\n"); - } - return ulStatus; -} - - - - - - -// set RSP payload fields -static void buildFCPstatus( PTACHYON fcChip, ULONG ExchangeID) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - FC_EXCHANGE *pExchange = &Exchanges->fcExchange[ExchangeID]; // shorthand - PFCP_STATUS_RESPONSE pFcpStatus; - - memset( &fcChip->SEST->RspHDR[ ExchangeID ].pl, 0, - sizeof( FCP_STATUS_RESPONSE) ); - if( pExchange->status ) // something wrong? - { - pFcpStatus = (PFCP_STATUS_RESPONSE) // cast RSP buffer for this xchng - &fcChip->SEST->RspHDR[ ExchangeID ].pl; - if( pExchange->status & COUNT_ERROR ) - { - - // set FCP response len valid (so we can report count error) - pFcpStatus->fcp_status |= FCP_RSP_LEN_VALID; - pFcpStatus->fcp_rsp_len = 0x04000000; // 4 byte len (BIG Endian) - - pFcpStatus->fcp_rsp_info = FCP_DATA_LEN_NOT_BURST_LEN; // RSP_CODE - } - } -} - - -static dma_addr_t -cpqfc_pci_map_sg_page( - struct pci_dev *pcidev, - ULONG *hw_paddr, // where to put phys addr for HW use - void *sgp_vaddr, // the virtual address of the sg page - dma_addr_t *umap_paddr, // where to put phys addr for unmap - unsigned int *maplen, // where to store sg entry length - int PairCount) // number of sg pairs used in the page. -{ - unsigned long aligned_addr = (unsigned long) sgp_vaddr; - - *maplen = PairCount * 8; - aligned_addr += TL_EXT_SG_PAGE_BYTELEN; - aligned_addr &= ~(TL_EXT_SG_PAGE_BYTELEN -1); - - *umap_paddr = pci_map_single(pcidev, (void *) aligned_addr, - *maplen, PCI_DMA_TODEVICE); - *hw_paddr = (ULONG) *umap_paddr; - -# if BITS_PER_LONG > 32 - if( *umap_paddr >>32 ) { - printk("cqpfcTS:Tach SG DMA addr %p>32 bits\n", - (void*)umap_paddr); - return 0; - } -# endif - return *umap_paddr; -} - -static void -cpqfc_undo_SEST_mappings(struct pci_dev *pcidev, - unsigned long contigaddr, int len, int dir, - struct scatterlist *sgl, int use_sg, - PSGPAGES *sgPages_head, - int allocated_pages) -{ - PSGPAGES i, next; - - if (contigaddr != (unsigned long) NULL) - pci_unmap_single(pcidev, contigaddr, len, dir); - - if (sgl != NULL) - pci_unmap_sg(pcidev, sgl, use_sg, dir); - - for (i=*sgPages_head; i != NULL ;i = next) - { - pci_unmap_single(pcidev, i->busaddr, i->maplen, - PCI_DMA_TODEVICE); - i->busaddr = (dma_addr_t) NULL; - i->maplen = 0L; - next = i->next; - kfree(i); - } - *sgPages_head = NULL; -} - -// This routine builds scatter/gather lists into SEST entries -// INPUTS: -// SESTalPair - SEST address @DWordA "Local Buffer Length" -// sgList - Scatter/Gather linked list of Len/Address data buffers -// OUTPUT: -// sgPairs - number of valid address/length pairs -// Remarks: -// The SEST data buffer pointers only depend on number of -// length/ address pairs, NOT on the type (IWE, TRE,...) -// Up to 3 pairs can be referenced in the SEST - more than 3 -// require this Extended S/G list page. The page holds 4, 8, 16... -// len/addr pairs, per Scatter/Gather List Page Length Reg. -// TachLite allows pages to be linked to any depth. - -//#define DBG_SEST_SGLIST 1 // for printing out S/G pairs with Ext. pages - -static int ap_hi_water = TL_DANGER_SGPAGES; - -static ULONG build_SEST_sgList( - struct pci_dev *pcidev, - ULONG *SESTalPairStart, // the 3 len/address buffers in SEST - Scsi_Cmnd *Cmnd, - ULONG *sgPairs, - PSGPAGES *sgPages_head) // link list of TL Ext. S/G pages from O/S Pool - -{ - ULONG i, AllocatedPages=0; // Tach Ext. S/G page allocations - ULONG* alPair = SESTalPairStart; - ULONG* ext_sg_page_phys_addr_place = NULL; - int PairCount; - unsigned long ulBuff, contigaddr; - ULONG total_data_len=0; // (in bytes) - ULONG bytes_to_go = Cmnd->request_bufflen; // total xfer (S/G sum) - ULONG thisMappingLen; - struct scatterlist *sgl = NULL; // S/G list (Linux format) - int sg_count, totalsgs; - dma_addr_t busaddr; - unsigned long thislen, offset; - PSGPAGES *sgpage = sgPages_head; - PSGPAGES prev_page = NULL; - -# define WE_HAVE_SG_LIST (sgl != (unsigned long) NULL) - contigaddr = (unsigned long) NULL; - - if( !Cmnd->use_sg ) // no S/G list? - { - if (bytes_to_go <= TL_MAX_SG_ELEM_LEN) - { - *sgPairs = 1; // use "local" S/G pair in SEST entry - // (for now, ignore address bits above #31) - - *alPair++ = bytes_to_go; // bits 18-0, length - - if (bytes_to_go != 0) { - contigaddr = ulBuff = pci_map_single(pcidev, - Cmnd->request_buffer, - Cmnd->request_bufflen, - Cmnd->sc_data_direction); - // printk("ms %p ", ulBuff); - } - else { - // No data transfer, (e.g.: Test Unit Ready) - // printk("btg=0 "); - *sgPairs = 0; - memset(alPair, 0, sizeof(*alPair)); - return 0; - } - -# if BITS_PER_LONG > 32 - if( ulBuff >>32 ) { - printk("FATAL! Tachyon DMA address %p " - "exceeds 32 bits\n", (void*)ulBuff ); - return 0; - } -# endif - *alPair = (ULONG)ulBuff; - return bytes_to_go; - } - else // We have a single large (too big) contiguous buffer. - { // We will have to break it up. We'll use the scatter - // gather code way below, but use contigaddr instead - // of sg_dma_addr(). (this is a very rare case). - - unsigned long btg; - contigaddr = pci_map_single(pcidev, Cmnd->request_buffer, - Cmnd->request_bufflen, - Cmnd->sc_data_direction); - - // printk("contigaddr = %p, len = %d\n", - // (void *) contigaddr, bytes_to_go); - totalsgs = 0; - for (btg = bytes_to_go; btg > 0; ) { - btg -= ( btg > TL_MAX_SG_ELEM_LEN ? - TL_MAX_SG_ELEM_LEN : btg ); - totalsgs++; - } - sgl = NULL; - *sgPairs = totalsgs; - } - } - else // we do have a scatter gather list - { - // [TBD - update for Linux to support > 32 bits addressing] - // since the format for local & extended S/G lists is different, - // check if S/G pairs exceeds 3. - // *sgPairs = Cmnd->use_sg; Nope, that's wrong. - - sgl = (struct scatterlist*)Cmnd->request_buffer; - sg_count = pci_map_sg(pcidev, sgl, Cmnd->use_sg, - Cmnd->sc_data_direction); - if( sg_count <= 3 ) { - - // we need to be careful here that no individual mapping - // is too large, and if any is, that breaking it up - // doesn't push us over 3 sgs, or, if it does, that we - // handle that case. Tachyon can take 0x7FFFF bits for length, - // but sg structure uses "unsigned int", on the face of it, - // up to 0xFFFFFFFF or even more. - - int i; - unsigned long thislen; - - totalsgs = 0; - for (i=0;i<sg_count;i++) { - thislen = sg_dma_len(&sgl[i]); - while (thislen >= TL_MAX_SG_ELEM_LEN) { - totalsgs++; - thislen -= TL_MAX_SG_ELEM_LEN; - } - if (thislen > 0) totalsgs++; - } - *sgPairs = totalsgs; - } else totalsgs = 999; // as a first estimate, definitely >3, - - // if (totalsgs != sg_count) - // printk("totalsgs = %d, sgcount=%d\n",totalsgs,sg_count); - } - - if( totalsgs <= 3 ) // can (must) use "local" SEST list - { - while( bytes_to_go) - { - offset = 0L; - - if ( WE_HAVE_SG_LIST ) - thisMappingLen = sg_dma_len(sgl); - else // or contiguous buffer? - thisMappingLen = bytes_to_go; - - while (thisMappingLen > 0) - { - thislen = thisMappingLen > TL_MAX_SG_ELEM_LEN ? - TL_MAX_SG_ELEM_LEN : thisMappingLen; - bytes_to_go = bytes_to_go - thislen; - - // we have L/A pair; L = thislen, A = physicalAddress - // load into SEST... - - total_data_len += thislen; - *alPair = thislen; // bits 18-0, length - - alPair++; - - if ( WE_HAVE_SG_LIST ) - ulBuff = sg_dma_address(sgl) + offset; - else - ulBuff = contigaddr + offset; - - offset += thislen; - -# if BITS_PER_LONG > 32 - if( ulBuff >>32 ) { - printk("cqpfcTS: 2Tach DMA address %p > 32 bits\n", - (void*)ulBuff ); - printk("%s = %p, offset = %ld\n", - WE_HAVE_SG_LIST ? "ulBuff" : "contigaddr", - WE_HAVE_SG_LIST ? (void *) ulBuff : (void *) contigaddr, - offset); - return 0; - } -# endif - *alPair++ = (ULONG)ulBuff; // lower 32 bits (31-0) - thisMappingLen -= thislen; - } - - if ( WE_HAVE_SG_LIST ) ++sgl; // next S/G pair - else if (bytes_to_go != 0) printk("BTG not zero!\n"); - -# ifdef DBG_SEST_SGLIST - printk("L=%d ", thisMappingLen); - printk("btg=%d ", bytes_to_go); -# endif - - } - // printk("i:%d\n", *sgPairs); - } - else // more than 3 pairs requires Extended S/G page (Pool Allocation) - { - // clear out SEST DWORDs (local S/G addr) C-F (A-B set in following logic) - for( i=2; i<6; i++) - alPair[i] = 0; - - PairCount = TL_EXT_SG_PAGE_COUNT; // forces initial page allocation - totalsgs = 0; - while( bytes_to_go ) - { - // Per SEST format, we can support 524287 byte lengths per - // S/G pair. Typical user buffers are 4k, and very rarely - // exceed 12k due to fragmentation of physical memory pages. - // However, on certain O/S system (not "user") buffers (on platforms - // with huge memories), it's possible to exceed this - // length in a single S/G address/len mapping, so we have to handle - // that. - - offset = 0L; - if ( WE_HAVE_SG_LIST ) - thisMappingLen = sg_dma_len(sgl); - else - thisMappingLen = bytes_to_go; - - while (thisMappingLen > 0) - { - thislen = thisMappingLen > TL_MAX_SG_ELEM_LEN ? - TL_MAX_SG_ELEM_LEN : thisMappingLen; - // printk("%d/%d/%d\n", thislen, thisMappingLen, bytes_to_go); - - // should we load into "this" extended S/G page, or allocate - // new page? - - if( PairCount >= TL_EXT_SG_PAGE_COUNT ) - { - // Now, we have to map the previous page, (triggering buffer bounce) - // The first time thru the loop, there won't be a previous page. - if (prev_page != NULL) // is there a prev page? - { - // this code is normally kind of hard to trigger, - // you have to use up more than 256 scatter gather - // elements to get here. Cranking down TL_MAX_SG_ELEM_LEN - // to an absurdly low value (128 bytes or so) to artificially - // break i/o's into a zillion pieces is how I tested it. - busaddr = cpqfc_pci_map_sg_page(pcidev, - ext_sg_page_phys_addr_place, - prev_page->page, - &prev_page->busaddr, - &prev_page->maplen, - PairCount); - } - // Allocate the TL Extended S/G list page. We have - // to allocate twice what we want to ensure required TL alignment - // (Tachlite TL/TS User Man. Rev 6.0, p 168) - // We store the original allocated PVOID so we can free later - *sgpage = kmalloc( sizeof(SGPAGES), GFP_ATOMIC); - if ( ! *sgpage ) - { - printk("cpqfc: Allocation failed @ %d S/G page allocations\n", - AllocatedPages); - total_data_len = 0; // failure!! Ext. S/G is All-or-none affair - - // unmap the previous mappings, if any. - - cpqfc_undo_SEST_mappings(pcidev, contigaddr, - Cmnd->request_bufflen, - Cmnd->sc_data_direction, - sgl, Cmnd->use_sg, sgPages_head, AllocatedPages+1); - - // FIXME: testing shows that if we get here, - // it's bad news. (this has been this way for a long - // time though, AFAIK. Not that that excuses it.) - - return 0; // give up (and probably hang the system) - } - // clear out memory we just allocated - memset( (*sgpage)->page,0,TL_EXT_SG_PAGE_BYTELEN*2); - (*sgpage)->next = NULL; - (*sgpage)->busaddr = (dma_addr_t) NULL; - (*sgpage)->maplen = 0L; - - // align the memory - TL requires sizeof() Ext. S/G page alignment. - // We doubled the actual required size so we could mask off LSBs - // to get desired offset - - ulBuff = (unsigned long) (*sgpage)->page; - ulBuff += TL_EXT_SG_PAGE_BYTELEN; - ulBuff &= ~(TL_EXT_SG_PAGE_BYTELEN -1); - - // set pointer, in SEST if first Ext. S/G page, or in last pair - // of linked Ext. S/G pages... (Only 32-bit PVOIDs, so just - // load lower 32 bits) - // NOTE: the Len field must be '0' if this is the first Ext. S/G - // pointer in SEST, and not 0 otherwise (we know thislen != 0). - - *alPair = (alPair != SESTalPairStart) ? thislen : 0; - -# ifdef DBG_SEST_SGLIST - printk("PairCount %d @%p even %Xh, ", - PairCount, alPair, *alPair); -# endif - - // Save the place where we need to store the physical - // address of this scatter gather page which we get when we map it - // (and mapping we can do only after we fill it in.) - alPair++; // next DWORD, will contain phys addr of the ext page - ext_sg_page_phys_addr_place = alPair; - - // Now, set alPair = the virtual addr of the (Extended) S/G page - // which will accept the Len/ PhysicalAddress pairs - alPair = (ULONG *) ulBuff; - - AllocatedPages++; - if (AllocatedPages >= ap_hi_water) - { - // This message should rarely, if ever, come out. - // Previously (cpqfc version <= 2.0.5) the driver would - // just puke if more than 4 SG pages were used, and nobody - // ever complained about that. This only comes out if - // more than 8 pages are used. - - printk(KERN_WARNING - "cpqfc: Possible danger. %d scatter gather pages used.\n" - "cpqfc: detected seemingly extreme memory " - "fragmentation or huge data transfers.\n", - AllocatedPages); - ap_hi_water = AllocatedPages+1; - } - - PairCount = 1; // starting new Ext. S/G page - prev_page = (*sgpage); // remember this page, for next time thru - sgpage = &((*sgpage)->next); - } // end of new TL Ext. S/G page allocation - - *alPair = thislen; // bits 18-0, length (range check above) - -# ifdef DBG_SEST_SGLIST - printk("PairCount %d @%p, even %Xh, ", PairCount, alPair, *alPair); -# endif - - alPair++; // next DWORD, physical address - - if ( WE_HAVE_SG_LIST ) - ulBuff = sg_dma_address(sgl) + offset; - else - ulBuff = contigaddr + offset; - offset += thislen; - -# if BITS_PER_LONG > 32 - if( ulBuff >>32 ) - { - printk("cqpfcTS: 1Tach DMA address %p > 32 bits\n", (void*)ulBuff ); - printk("%s = %p, offset = %ld\n", - WE_HAVE_SG_LIST ? "ulBuff" : "contigaddr", - WE_HAVE_SG_LIST ? (void *) ulBuff : (void *) contigaddr, - offset); - return 0; - } -# endif - - *alPair = (ULONG) ulBuff; // lower 32 bits (31-0) - -# ifdef DBG_SEST_SGLIST - printk("odd %Xh\n", *alPair); -# endif - alPair++; // next DWORD, next address/length pair - - PairCount++; // next Length/Address pair - - // if (PairCount > pc_hi_water) - // { - // printk("pc hi = %d ", PairCount); - // pc_hi_water = PairCount; - // } - bytes_to_go -= thislen; - total_data_len += thislen; - thisMappingLen -= thislen; - totalsgs++; - } // while (thisMappingLen > 0) - if ( WE_HAVE_SG_LIST ) sgl++; // next S/G pair - } // while (bytes_to_go) - - // printk("Totalsgs=%d\n", totalsgs); - *sgPairs = totalsgs; - - // PCI map (and bounce) the last (and usually only) extended SG page - busaddr = cpqfc_pci_map_sg_page(pcidev, - ext_sg_page_phys_addr_place, - prev_page->page, - &prev_page->busaddr, - &prev_page->maplen, - PairCount); - } - return total_data_len; -} - - - -// The Tachlite SEST table is referenced to OX_ID (or RX_ID). To optimize -// performance and debuggability, we index the Exchange structure to FC X_ID -// This enables us to build exchanges for later en-queing to Tachyon, -// provided we have an open X_ID slot. At Tachyon queing time, we only -// need an ERQ slot; then "fix-up" references in the -// IRB, FCHS, etc. as needed. -// RETURNS: -// 0 if successful -// non-zero on error -//sstartex -ULONG cpqfcTSStartExchange( - CPQFCHBA *cpqfcHBAdata, - LONG ExchangeID ) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - FC_EXCHANGE *pExchange = &Exchanges->fcExchange[ ExchangeID ]; // shorthand - USHORT producer, consumer; - ULONG ulStatus=0; - short int ErqIndex; - BOOLEAN CompleteExchange = FALSE; // e.g. ACC replies are complete - BOOLEAN SestType=FALSE; - ULONG InboundData=0; - - // We will manipulate Tachlite chip registers here to successfully - // start exchanges. - - // Check that link is not down -- we can't start an exchange on a - // down link! - - if( fcChip->Registers.FMstatus.value & 0x80) // LPSM offline? - { -printk("fcStartExchange: PSM offline (%Xh), x_ID %Xh, type %Xh, port_id %Xh\n", - fcChip->Registers.FMstatus.value & 0xFF, - ExchangeID, - pExchange->type, - pExchange->fchs.d_id); - - if( ExchangeID >= TACH_SEST_LEN ) // Link Service Outbound frame? - { - // Our most popular LinkService commands are port discovery types - // (PLOGI/ PDISC...), which are implicitly nullified by Link Down - // events, so it makes no sense to Que them. However, ABTS should - // be queued, since exchange sequences are likely destroyed by - // Link Down events, and we want to notify other ports of broken - // sequences by aborting the corresponding exchanges. - if( pExchange->type != BLS_ABTS ) - { - ulStatus = LNKDWN_OSLS; - goto Done; - // don't Que most LinkServ exchanges on LINK DOWN - } - } - - printk("fcStartExchange: Que x_ID %Xh, type %Xh\n", - ExchangeID, pExchange->type); - pExchange->status |= EXCHANGE_QUEUED; - ulStatus = EXCHANGE_QUEUED; - goto Done; - } - - // Make sure ERQ has available space. - - producer = (USHORT)fcChip->ERQ->producerIndex; // copies for logical arith. - consumer = (USHORT)fcChip->ERQ->consumerIndex; - producer++; // We are testing for full que by incrementing - - if( producer >= ERQ_LEN ) // rollover condition? - producer = 0; - if( consumer != producer ) // ERQ not full? - { - // ****************** Need Atomic access to chip registers!!******** - - // remember ERQ PI for copying IRB - ErqIndex = (USHORT)fcChip->ERQ->producerIndex; - fcChip->ERQ->producerIndex = producer; // this is written to Tachyon - // we have an ERQ slot! If SCSI command, need SEST slot - // otherwise we are done. - - // Note that Tachyon requires that bit 15 of the OX_ID or RX_ID be - // set according to direction of data to/from Tachyon for SEST assists. - // For consistency, enforce this rule for Link Service (non-SEST) - // exchanges as well. - - // fix-up the X_ID field in IRB - pExchange->IRB.Req_A_Trans_ID = ExchangeID & 0x7FFF; // 15-bit field - - // fix-up the X_ID field in fchs -- depends on Originator or Responder, - // outgoing or incoming data? - switch( pExchange->type ) - { - // ORIGINATOR types... we're setting our OX_ID and - // defaulting the responder's RX_ID to 0xFFFF - - case SCSI_IRE: - // Requirement: set MSB of x_ID for Incoming TL data - // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) - InboundData = 0x8000; - - case SCSI_IWE: - SestType = TRUE; - pExchange->fchs.ox_rx_id = (ExchangeID | InboundData); - pExchange->fchs.ox_rx_id <<= 16; // MSW shift - pExchange->fchs.ox_rx_id |= 0xffff; // add default RX_ID - - // now fix-up the Data HDR OX_ID (TL automatically does rx_id) - // (not necessary for IRE -- data buffer unused) - if( pExchange->type == SCSI_IWE) - { - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id = - pExchange->fchs.ox_rx_id; - - } - - break; - - - case FCS_NSR: // ext. link service Name Service Request - case ELS_SCR: // ext. link service State Change Registration - case ELS_FDISC:// ext. link service login - case ELS_FLOGI:// ext. link service login - case ELS_LOGO: // FC-PH extended link service logout - case BLS_NOP: // Basic link service No OPeration - case ELS_PLOGI:// ext. link service login (PLOGI) - case ELS_PDISC:// ext. link service login (PDISC) - case ELS_PRLI: // ext. link service process login - - pExchange->fchs.ox_rx_id = ExchangeID; - pExchange->fchs.ox_rx_id <<= 16; // MSW shift - pExchange->fchs.ox_rx_id |= 0xffff; // and RX_ID - - break; - - - - - // RESPONDER types... we must set our RX_ID while preserving - // sender's OX_ID - // outgoing (or no) data - case ELS_RJT: // extended link service reject - case ELS_LOGO_ACC: // FC-PH extended link service logout accept - case ELS_ACC: // ext. generic link service accept - case ELS_PLOGI_ACC:// ext. link service login accept (PLOGI or PDISC) - case ELS_PRLI_ACC: // ext. link service process login accept - - CompleteExchange = TRUE; // Reply (ACC or RJT) is end of exchange - pExchange->fchs.ox_rx_id |= (ExchangeID & 0xFFFF); - - break; - - - // since we are a Responder, OX_ID should already be set by - // cpqfcTSBuildExchange(). We need to -OR- in RX_ID - case SCSI_TWE: - SestType = TRUE; - // Requirement: set MSB of x_ID for Incoming TL data - // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) - - pExchange->fchs.ox_rx_id &= 0xFFFF0000; // clear RX_ID - // Requirement: set MSB of RX_ID for Incoming TL data - // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) - pExchange->fchs.ox_rx_id |= (ExchangeID | 0x8000); - break; - - - case SCSI_TRE: - SestType = TRUE; - - // there is no XRDY for SEST target read; the data - // header needs to be updated. Also update the RSP - // exchange IDs for the status frame, in case it is sent automatically - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id |= ExchangeID; - fcChip->SEST->RspHDR[ ExchangeID ].ox_rx_id = - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id; - - // for easier FCP response logic (works for TWE and TRE), - // copy exchange IDs. (Not needed if TRE 'RSP' bit set) - pExchange->fchs.ox_rx_id = - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id; - - break; - - - case FCP_RESPONSE: // using existing OX_ID/ RX_ID pair, - // start SFS FCP-RESPONSE frame - // OX/RX_ID should already be set! (See "fcBuild" above) - CompleteExchange = TRUE; // RSP is end of FCP-SCSI exchange - - - break; - - - case BLS_ABTS_RJT: // uses new RX_ID, since SEST x_ID non-existent - case BLS_ABTS_ACC: // using existing OX_ID/ RX_ID pair from SEST entry - CompleteExchange = TRUE; // ACC or RJT marks end of FCP-SCSI exchange - case BLS_ABTS: // using existing OX_ID/ RX_ID pair from SEST entry - - - break; - - - default: - printk("Error on fcStartExchange: undefined type %Xh(%d)\n", - pExchange->type, pExchange->type); - return INVALID_ARGS; - } - - - // X_ID fields are entered -- copy IRB to Tachyon's ERQ - - - memcpy( - &fcChip->ERQ->QEntry[ ErqIndex ], // dest. - &pExchange->IRB, - 32); // fixed (hardware) length! - - PCI_TRACEO( ExchangeID, 0xA0) - - // ACTION! May generate INT and IMQ entry - writel( fcChip->ERQ->producerIndex, - fcChip->Registers.ERQproducerIndex.address); - - - if( ExchangeID >= TACH_SEST_LEN ) // Link Service Outbound frame? - { - - // wait for completion! (TDB -- timeout and chip reset) - - - PCI_TRACEO( ExchangeID, 0xA4) - - enable_irq( cpqfcHBAdata->HostAdapter->irq); // only way to get Sem. - - down_interruptible( cpqfcHBAdata->TYOBcomplete); - - disable_irq( cpqfcHBAdata->HostAdapter->irq); - PCI_TRACE( 0xA4) - - // On login exchanges, BAD_ALPA (non-existent port_id) results in - // FTO (Frame Time Out) on the Outbound Completion message. - // If we got an FTO status, complete the exchange (free up slot) - if( CompleteExchange || // flag from Reply frames - pExchange->status ) // typically, can get FRAME_TO - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - } - - else // SEST Exchange - { - ulStatus = 0; // ship & pray success (e.g. FCP-SCSI) - - if( CompleteExchange ) // by Type of exchange (e.g. end-of-xchng) - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - - else - pExchange->status &= ~EXCHANGE_QUEUED; // clear ExchangeQueued flag - - } - } - - - else // ERQ 'producer' = 'consumer' and QUE is full - { - ulStatus = OUTQUE_FULL; // Outbound (ERQ) Que full - } - -Done: - PCI_TRACE( 0xA0) - return ulStatus; -} - - - - - -// Scan fcController->fcExchanges array for a usuable index (a "free" -// exchange). -// Inputs: -// fcChip - pointer to TachLite chip structure -// Return: -// index - exchange array element where exchange can be built -// -1 - exchange array is full -// REMARKS: -// Although this is a (yuk!) linear search, we presume -// that the system will complete exchanges about as quickly as -// they are submitted. A full Exchange array (and hence, max linear -// search time for free exchange slot) almost guarantees a Fibre problem -// of some sort. -// In the interest of making exchanges easier to debug, we want a LRU -// (Least Recently Used) scheme. - - -static LONG FindFreeExchange( PTACHYON fcChip, ULONG type ) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG i; - ULONG ulStatus=-1; // assume failure - - - if( type == SCSI_IRE || - type == SCSI_TRE || - type == SCSI_IWE || - type == SCSI_TWE) - { - // SCSI type - X_IDs should be from 0 to TACH_SEST_LEN-1 - if( fcChip->fcSestExchangeLRU >= TACH_SEST_LEN) // rollover? - fcChip->fcSestExchangeLRU = 0; - i = fcChip->fcSestExchangeLRU; // typically it's already free! - - if( Exchanges->fcExchange[i].type == 0 ) // check for "free" element - { - ulStatus = 0; // success! - } - - else - { // YUK! we need to do a linear search for free element. - // Fragmentation of the fcExchange array is due to excessively - // long completions or timeouts. - - while( TRUE ) - { - if( ++i >= TACH_SEST_LEN ) // rollover check - i = 0; // beginning of SEST X_IDs - -// printk( "looping for SCSI xchng ID: i=%d, type=%Xh\n", -// i, Exchanges->fcExchange[i].type); - - if( Exchanges->fcExchange[i].type == 0 ) // "free"? - { - ulStatus = 0; // success! - break; - } - if( i == fcChip->fcSestExchangeLRU ) // wrapped-around array? - { - printk( "SEST X_ID space full\n"); - break; // failed - prevent inf. loop - } - } - } - fcChip->fcSestExchangeLRU = i + 1; // next! (rollover check next pass) - } - - - - else // Link Service type - X_IDs should be from TACH_SEST_LEN - // to TACH_MAX_XID - { - if( fcChip->fcLsExchangeLRU >= TACH_MAX_XID || // range check - fcChip->fcLsExchangeLRU < TACH_SEST_LEN ) // (e.g. startup) - fcChip->fcLsExchangeLRU = TACH_SEST_LEN; - - i = fcChip->fcLsExchangeLRU; // typically it's already free! - if( Exchanges->fcExchange[i].type == 0 ) // check for "free" element - { - ulStatus = 0; // success! - } - - else - { // YUK! we need to do a linear search for free element - // Fragmentation of the fcExchange array is due to excessively - // long completions or timeouts. - - while( TRUE ) - { - if( ++i >= TACH_MAX_XID ) // rollover check - i = TACH_SEST_LEN;// beginning of Link Service X_IDs - -// printk( "looping for xchng ID: i=%d, type=%Xh\n", -// i, Exchanges->fcExchange[i].type); - - if( Exchanges->fcExchange[i].type == 0 ) // "free"? - { - ulStatus = 0; // success! - break; - } - if( i == fcChip->fcLsExchangeLRU ) // wrapped-around array? - { - printk( "LinkService X_ID space full\n"); - break; // failed - prevent inf. loop - } - } - } - fcChip->fcLsExchangeLRU = i + 1; // next! (rollover check next pass) - - } - - if( !ulStatus ) // success? - Exchanges->fcExchange[i].type = type; // allocate it. - - else - i = -1; // error - all exchanges "open" - - return i; -} - -static void -cpqfc_pci_unmap_extended_sg(struct pci_dev *pcidev, - PTACHYON fcChip, - ULONG x_ID) -{ - // Unmaps the memory regions used to hold the scatter gather lists - - PSGPAGES i; - - // Were there any such regions needing unmapping? - if (! USES_EXTENDED_SGLIST(fcChip->SEST, x_ID)) - return; // No such regions, we're outta here. - - // for each extended scatter gather region needing unmapping... - for (i=fcChip->SEST->sgPages[x_ID] ; i != NULL ; i = i->next) - pci_unmap_single(pcidev, i->busaddr, i->maplen, - PCI_DMA_TODEVICE); -} - -// Called also from cpqfcTScontrol.o, so can't be static -void -cpqfc_pci_unmap(struct pci_dev *pcidev, - Scsi_Cmnd *cmd, - PTACHYON fcChip, - ULONG x_ID) -{ - // Undo the DMA mappings - if (cmd->use_sg) { // Used scatter gather list for data buffer? - cpqfc_pci_unmap_extended_sg(pcidev, fcChip, x_ID); - pci_unmap_sg(pcidev, cmd->buffer, cmd->use_sg, - cmd->sc_data_direction); - // printk("umsg %d\n", cmd->use_sg); - } - else if (cmd->request_bufflen) { - // printk("ums %p ", fcChip->SEST->u[ x_ID ].IWE.GAddr1); - pci_unmap_single(pcidev, fcChip->SEST->u[ x_ID ].IWE.GAddr1, - cmd->request_bufflen, - cmd->sc_data_direction); - } -} - -// We call this routine to free an Exchange for any reason: -// completed successfully, completed with error, aborted, etc. - -// returns FALSE if Exchange failed and "retry" is acceptable -// returns TRUE if Exchange was successful, or retry is impossible -// (e.g. port/device gone). -//scompleteexchange - -void cpqfcTSCompleteExchange( - struct pci_dev *pcidev, - PTACHYON fcChip, - ULONG x_ID) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - int already_unmapped = 0; - - if( x_ID < TACH_SEST_LEN ) // SEST-based (or LinkServ for FCP exchange) - { - if( Exchanges->fcExchange[ x_ID ].Cmnd == NULL ) // what#@! - { -// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); - printk(" x_ID %Xh, type %Xh, NULL ptr!\n", x_ID, - Exchanges->fcExchange[ x_ID ].type); - - goto CleanUpSestResources; // this path should be very rare. - } - - // we have Linux Scsi Cmnd ptr..., now check our Exchange status - // to decide how to complete this SEST FCP exchange - - if( Exchanges->fcExchange[ x_ID ].status ) // perhaps a Tach indicated problem, - // or abnormal exchange completion - { - // set FCP Link statistics - - if( Exchanges->fcExchange[ x_ID ].status & FC2_TIMEOUT) - fcChip->fcStats.timeouts++; - if( Exchanges->fcExchange[ x_ID ].status & INITIATOR_ABORT) - fcChip->fcStats.FC4aborted++; - if( Exchanges->fcExchange[ x_ID ].status & COUNT_ERROR) - fcChip->fcStats.CntErrors++; - if( Exchanges->fcExchange[ x_ID ].status & LINKFAIL_TX) - fcChip->fcStats.linkFailTX++; - if( Exchanges->fcExchange[ x_ID ].status & LINKFAIL_RX) - fcChip->fcStats.linkFailRX++; - if( Exchanges->fcExchange[ x_ID ].status & OVERFLOW) - fcChip->fcStats.CntErrors++; - - // First, see if the Scsi upper level initiated an ABORT on this - // exchange... - if( Exchanges->fcExchange[ x_ID ].status == INITIATOR_ABORT ) - { - printk(" DID_ABORT, x_ID %Xh, Cmnd %p ", - x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - goto CleanUpSestResources; // (we don't expect Linux _aborts) - } - - // Did our driver timeout the Exchange, or did Tachyon indicate - // a failure during transmission? Ask for retry with "SOFT_ERROR" - else if( Exchanges->fcExchange[ x_ID ].status & FC2_TIMEOUT) - { -// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - } - - // Did frame(s) for an open exchange arrive in the SFQ, - // meaning the SEST was unable to process them? - else if( Exchanges->fcExchange[ x_ID ].status & SFQ_FRAME) - { -// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - } - - // Did our driver timeout the Exchange, or did Tachyon indicate - // a failure during transmission? Ask for retry with "SOFT_ERROR" - else if( - (Exchanges->fcExchange[ x_ID ].status & LINKFAIL_TX) || - (Exchanges->fcExchange[ x_ID ].status & PORTID_CHANGED) || - (Exchanges->fcExchange[ x_ID ].status & FRAME_TO) || - (Exchanges->fcExchange[ x_ID ].status & INV_ENTRY) || - (Exchanges->fcExchange[ x_ID ].status & ABORTSEQ_NOTIFY) ) - - - { -// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - - - } - - // e.g., a LOGOut happened, or device never logged back in. - else if( Exchanges->fcExchange[ x_ID ].status & DEVICE_REMOVED) - { -// printk(" *LOGOut or timeout on login!* "); - // trigger? -// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); - - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_BAD_TARGET <<16); - } - - - // Did Tachyon indicate a CNT error? We need further analysis - // to determine if the exchange is acceptable - else if( Exchanges->fcExchange[ x_ID ].status == COUNT_ERROR) - { - UCHAR ScsiStatus; - FCP_STATUS_RESPONSE *pFcpStatus = - (PFCP_STATUS_RESPONSE)&fcChip->SEST->RspHDR[ x_ID ].pl; - - ScsiStatus = pFcpStatus->fcp_status >>24; - - // If the command is a SCSI Read/Write type, we don't tolerate - // count errors of any kind; assume the count error is due to - // a dropped frame and ask for retry... - - if(( (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x8) || - (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x28) || - (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0xA) || - (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x2A) ) - && - ScsiStatus == 0 ) - { - // ask for retry -/* printk("COUNT_ERROR retry, x_ID %Xh, status %Xh, Cmnd %p\n", - x_ID, Exchanges->fcExchange[ x_ID ].status, - Exchanges->fcExchange[ x_ID ].Cmnd);*/ - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - } - - else // need more analysis - { - cpqfcTSCheckandSnoopFCP(fcChip, x_ID); // (will set ->result) - } - } - - // default: NOTE! We don't ever want to get here. Getting here - // implies something new is happening that we've never had a test - // case for. Need code maintenance! Return "ERROR" - else - { - unsigned int stat = Exchanges->fcExchange[ x_ID ].status; - printk("DEFAULT result %Xh, x_ID %Xh, Cmnd %p", - Exchanges->fcExchange[ x_ID ].status, x_ID, - Exchanges->fcExchange[ x_ID ].Cmnd); - - if (stat & INVALID_ARGS) printk(" INVALID_ARGS "); - if (stat & LNKDWN_OSLS) printk(" LNKDWN_OSLS "); - if (stat & LNKDWN_LASER) printk(" LNKDWN_LASER "); - if (stat & OUTQUE_FULL) printk(" OUTQUE_FULL "); - if (stat & DRIVERQ_FULL) printk(" DRIVERQ_FULL "); - if (stat & SEST_FULL) printk(" SEST_FULL "); - if (stat & BAD_ALPA) printk(" BAD_ALPA "); - if (stat & OVERFLOW) printk(" OVERFLOW "); - if (stat & COUNT_ERROR) printk(" COUNT_ERROR "); - if (stat & LINKFAIL_RX) printk(" LINKFAIL_RX "); - if (stat & ABORTSEQ_NOTIFY) printk(" ABORTSEQ_NOTIFY "); - if (stat & LINKFAIL_TX) printk(" LINKFAIL_TX "); - if (stat & HOSTPROG_ERR) printk(" HOSTPROG_ERR "); - if (stat & FRAME_TO) printk(" FRAME_TO "); - if (stat & INV_ENTRY) printk(" INV_ENTRY "); - if (stat & SESTPROG_ERR) printk(" SESTPROG_ERR "); - if (stat & OUTBOUND_TIMEOUT) printk(" OUTBOUND_TIMEOUT "); - if (stat & INITIATOR_ABORT) printk(" INITIATOR_ABORT "); - if (stat & MEMPOOL_FAIL) printk(" MEMPOOL_FAIL "); - if (stat & FC2_TIMEOUT) printk(" FC2_TIMEOUT "); - if (stat & TARGET_ABORT) printk(" TARGET_ABORT "); - if (stat & EXCHANGE_QUEUED) printk(" EXCHANGE_QUEUED "); - if (stat & PORTID_CHANGED) printk(" PORTID_CHANGED "); - if (stat & DEVICE_REMOVED) printk(" DEVICE_REMOVED "); - if (stat & SFQ_FRAME) printk(" SFQ_FRAME "); - printk("\n"); - - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_ERROR <<16); - } - } - else // definitely no Tach problem, but perhaps an FCP problem - { - // set FCP Link statistic - fcChip->fcStats.ok++; - cpqfcTSCheckandSnoopFCP( fcChip, x_ID); // (will set ->result) - } - - cpqfc_pci_unmap(pcidev, Exchanges->fcExchange[x_ID].Cmnd, - fcChip, x_ID); // undo DMA mappings. - already_unmapped = 1; - - // OK, we've set the Scsi "->result" field, so proceed with calling - // Linux Scsi "done" (if not NULL), and free any kernel memory we - // may have allocated for the exchange. - - PCI_TRACEO( (ULONG)Exchanges->fcExchange[x_ID].Cmnd, 0xAC); - // complete the command back to upper Scsi drivers - if( Exchanges->fcExchange[ x_ID ].Cmnd->scsi_done != NULL) - { - // Calling "done" on an Linux _abort() aborted - // Cmnd causes a kernel panic trying to re-free mem. - // Actually, we shouldn't do anything with an _abort CMND - if( Exchanges->fcExchange[ x_ID ].Cmnd->result != (DID_ABORT<<16) ) - { - PCI_TRACE(0xAC) - call_scsi_done(Exchanges->fcExchange[ x_ID ].Cmnd); - } - else - { -// printk(" not calling scsi_done on x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - } - } - else{ - printk(" x_ID %Xh, type %Xh, Cdb0 %Xh\n", x_ID, - Exchanges->fcExchange[ x_ID ].type, - Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0]); - printk(" cpqfcTS: Null scsi_done function pointer!\n"); - } - - - // Now, clean up non-Scsi_Cmnd items... -CleanUpSestResources: - - if (!already_unmapped) - cpqfc_pci_unmap(pcidev, Exchanges->fcExchange[x_ID].Cmnd, - fcChip, x_ID); // undo DMA mappings. - - // Was an Extended Scatter/Gather page allocated? We know - // this by checking DWORD 4, bit 31 ("LOC") of SEST entry - if( !(fcChip->SEST->u[ x_ID ].IWE.Buff_Off & 0x80000000)) - { - PSGPAGES p, next; - - // extended S/G list was used -- Free the allocated ext. S/G pages - for (p = fcChip->SEST->sgPages[x_ID]; p != NULL; p = next) { - next = p->next; - kfree(p); - } - fcChip->SEST->sgPages[x_ID] = NULL; - } - - Exchanges->fcExchange[ x_ID ].Cmnd = NULL; - } // Done with FCP (SEST) exchanges - - - // the remaining logic is common to ALL Exchanges: - // FCP(SEST) and LinkServ. - - Exchanges->fcExchange[ x_ID ].type = 0; // there -- FREE! - Exchanges->fcExchange[ x_ID ].status = 0; - - PCI_TRACEO( x_ID, 0xAC) - - - return; -} // (END of CompleteExchange function) - - - - -// Unfortunately, we must snoop all command completions in -// order to manipulate certain return fields, and take note of -// device types, etc., to facilitate the Fibre-Channel to SCSI -// "mapping". -// (Watch for BIG Endian confusion on some payload fields) -void cpqfcTSCheckandSnoopFCP( PTACHYON fcChip, ULONG x_ID) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - Scsi_Cmnd *Cmnd = Exchanges->fcExchange[ x_ID].Cmnd; - FCP_STATUS_RESPONSE *pFcpStatus = - (PFCP_STATUS_RESPONSE)&fcChip->SEST->RspHDR[ x_ID ].pl; - UCHAR ScsiStatus; - - ScsiStatus = pFcpStatus->fcp_status >>24; - -#ifdef FCP_COMPLETION_DBG - printk("ScsiStatus = 0x%X\n", ScsiStatus); -#endif - - // First, check FCP status - if( pFcpStatus->fcp_status & FCP_RSP_LEN_VALID ) - { - // check response code (RSP_CODE) -- most popular is bad len - // 1st 4 bytes of rsp info -- only byte 3 interesting - if( pFcpStatus->fcp_rsp_info & FCP_DATA_LEN_NOT_BURST_LEN ) - { - - // do we EVER get here? - printk("cpqfcTS: FCP data len not burst len, x_ID %Xh\n", x_ID); - } - } - - // for now, go by the ScsiStatus, and manipulate certain - // commands when necessary... - if( ScsiStatus == 0) // SCSI status byte "good"? - { - Cmnd->result = 0; // everything's OK - - if( (Cmnd->cmnd[0] == INQUIRY)) - { - UCHAR *InquiryData = Cmnd->request_buffer; - PFC_LOGGEDIN_PORT pLoggedInPort; - - // We need to manipulate INQUIRY - // strings for COMPAQ RAID controllers to force - // Linux to scan additional LUNs. Namely, set - // the Inquiry string byte 2 (ANSI-approved version) - // to 2. - - if( !memcmp( &InquiryData[8], "COMPAQ", 6 )) - { - InquiryData[2] = 0x2; // claim SCSI-2 compliance, - // so multiple LUNs may be scanned. - // (no SCSI-2 problems known in CPQ) - } - - // snoop the Inquiry to detect Disk, Tape, etc. type - // (search linked list for the port_id we sent INQUIRY to) - pLoggedInPort = fcFindLoggedInPort( fcChip, - NULL, // DON'T search Scsi Nexus (we will set it) - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF, - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - if( pLoggedInPort ) - { - pLoggedInPort->ScsiNexus.InqDeviceType = InquiryData[0]; - } - else - { - printk("cpqfcTS: can't find LoggedIn FC port %06X for INQUIRY\n", - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF); - } - } - } - - - // Scsi Status not good -- pass it back to caller - - else - { - Cmnd->result = ScsiStatus; // SCSI status byte is 1st - - // check for valid "sense" data - - if( pFcpStatus->fcp_status & FCP_SNS_LEN_VALID ) - { // limit Scsi Sense field length! - int SenseLen = pFcpStatus->fcp_sns_len >>24; // (BigEndian) lower byte - - SenseLen = SenseLen > sizeof( Cmnd->sense_buffer) ? - sizeof( Cmnd->sense_buffer) : SenseLen; - - -#ifdef FCP_COMPLETION_DBG - printk("copy sense_buffer %p, len %d, result %Xh\n", - Cmnd->sense_buffer, SenseLen, Cmnd->result); -#endif - - // NOTE: There is some dispute over the FCP response - // format. Most FC devices assume that FCP_RSP_INFO - // is 8 bytes long, in spite of the fact that FCP_RSP_LEN - // is (virtually) always 0 and the field is "invalid". - // Some other devices assume that - // the FCP_SNS_INFO begins after FCP_RSP_LEN bytes (i.e. 0) - // when the FCP_RSP is invalid (this almost appears to be - // one of those "religious" issues). - // Consequently, we test the usual position of FCP_SNS_INFO - // for 7Xh, since the SCSI sense format says the first - // byte ("error code") should be 0x70 or 0x71. In practice, - // we find that every device does in fact have 0x70 or 0x71 - // in the first byte position, so this test works for all - // FC devices. - // (This logic is especially effective for the CPQ/DEC HSG80 - // & HSG60 controllers). - - if( (pFcpStatus->fcp_sns_info[0] & 0x70) == 0x70 ) - memcpy( Cmnd->sense_buffer, - &pFcpStatus->fcp_sns_info[0], SenseLen); - else - { - unsigned char *sbPtr = - (unsigned char *)&pFcpStatus->fcp_sns_info[0]; - sbPtr -= 8; // back up 8 bytes hoping to find the - // start of the sense buffer - memcpy( Cmnd->sense_buffer, sbPtr, SenseLen); - } - - // in the special case of Device Reset, tell upper layer - // to immediately retry (with SOFT_ERROR status) - // look for Sense Key Unit Attention (0x6) with ASC Device - // Reset (0x29) - // printk("SenseLen %d, Key = 0x%X, ASC = 0x%X\n", - // SenseLen, Cmnd->sense_buffer[2], - // Cmnd->sense_buffer[12]); - if( ((Cmnd->sense_buffer[2] & 0xF) == 0x6) && - (Cmnd->sense_buffer[12] == 0x29) ) // Sense Code "reset" - { - Cmnd->result |= (DID_SOFT_ERROR << 16); // "Host" status byte 3rd - } - - // check for SenseKey "HARDWARE ERROR", ASC InternalTargetFailure - else if( ((Cmnd->sense_buffer[2] & 0xF) == 0x4) && // "hardware error" - (Cmnd->sense_buffer[12] == 0x44) ) // Addtl. Sense Code - { -// printk("HARDWARE_ERROR, Channel/Target/Lun %d/%d/%d\n", -// Cmnd->channel, Cmnd->target, Cmnd->lun); - Cmnd->result |= (DID_ERROR << 16); // "Host" status byte 3rd - } - - } // (end of sense len valid) - - // there is no sense data to help out Linux's Scsi layers... - // We'll just return the Scsi status and hope he will "do the - // right thing" - else - { - // as far as we know, the Scsi status is sufficient - Cmnd->result |= (DID_OK << 16); // "Host" status byte 3rd - } - } -} - - - -//PPPPPPPPPPPPPPPPPPPPPPPPP PAYLOAD PPPPPPPPP -// build data PAYLOAD; SCSI FCP_CMND I.U. -// remember BIG ENDIAN payload - DWord values must be byte-reversed -// (hence the affinity for byte pointer building). - -static int build_FCP_payload( Scsi_Cmnd *Cmnd, - UCHAR* payload, ULONG type, ULONG fcp_dl ) -{ - int i; - - - switch( type) - { - - case SCSI_IWE: - case SCSI_IRE: - // 8 bytes FCP_LUN - // Peripheral Device or Volume Set addressing, and LUN mapping - // When the FC port was looked up, we copied address mode - // and any LUN mask to the scratch pad SCp.phase & .mode - - *payload++ = (UCHAR)Cmnd->SCp.phase; - - // Now, because of "lun masking" - // (aka selective storage presentation), - // the contiguous Linux Scsi lun number may not match the - // device's lun number, so we may have to "map". - - *payload++ = (UCHAR)Cmnd->SCp.have_data_in; - - // We don't know of anyone in the FC business using these - // extra "levels" of addressing. In fact, confusion still exists - // just using the FIRST level... ;-) - - *payload++ = 0; // 2nd level addressing - *payload++ = 0; - *payload++ = 0; // 3rd level addressing - *payload++ = 0; - *payload++ = 0; // 4th level addressing - *payload++ = 0; - - // 4 bytes Control Field FCP_CNTL - *payload++ = 0; // byte 0: (MSB) reserved - *payload++ = 0; // byte 1: task codes - - // byte 2: task management flags - // another "use" of the spare field to accomplish TDR - // note combination needed - if( (Cmnd->cmnd[0] == RELEASE) && - (Cmnd->SCp.buffers_residual == FCP_TARGET_RESET) ) - { - Cmnd->cmnd[0] = 0; // issue "Test Unit Ready" for TDR - *payload++ = 0x20; // target device reset bit - } - else - *payload++ = 0; // no TDR - // byte 3: (LSB) execution management codes - // bit 0 write, bit 1 read (don't set together) - - if( fcp_dl != 0 ) - { - if( type == SCSI_IWE ) // WRITE - *payload++ = 1; - else // READ - *payload++ = 2; - } - else - { - // On some devices, if RD or WR bits are set, - // and fcp_dl is 0, they will generate an error on the command. - // (i.e., if direction is specified, they insist on a length). - *payload++ = 0; // no data (necessary for CPQ) - } - - - // NOTE: clean this up if/when MAX_COMMAND_SIZE is increased to 16 - // FCP_CDB allows 16 byte SCSI command descriptor blk; - // Linux SCSI CDB array is MAX_COMMAND_SIZE (12 at this time...) - for( i=0; (i < Cmnd->cmd_len) && i < MAX_COMMAND_SIZE; i++) - *payload++ = Cmnd->cmnd[i]; - - // if( Cmnd->cmd_len == 16 ) - // { - // memcpy( payload, &Cmnd->SCp.buffers_residual, 4); - // } - payload+= (16 - i); - - // FCP_DL is largest number of expected data bytes - // per CDB (i.e. read/write command) - *payload++ = (UCHAR)(fcp_dl >>24); // (MSB) 8 bytes data len FCP_DL - *payload++ = (UCHAR)(fcp_dl >>16); - *payload++ = (UCHAR)(fcp_dl >>8); - *payload++ = (UCHAR)fcp_dl; // (LSB) - break; - - case SCSI_TWE: // need FCP_XFER_RDY - *payload++ = 0; // (4 bytes) DATA_RO (MSB byte 0) - *payload++ = 0; - *payload++ = 0; - *payload++ = 0; // LSB (byte 3) - // (4 bytes) BURST_LEN - // size of following FCP_DATA payload - *payload++ = (UCHAR)(fcp_dl >>24); // (MSB) 8 bytes data len FCP_DL - *payload++ = (UCHAR)(fcp_dl >>16); - *payload++ = (UCHAR)(fcp_dl >>8); - *payload++ = (UCHAR)fcp_dl; // (LSB) - // 4 bytes RESERVED - *payload++ = 0; - *payload++ = 0; - *payload++ = 0; - *payload++ = 0; - break; - - default: - break; - } - - return 0; -} - |