diff options
author | Adam McDaniel <adam@array.org> | 2009-02-23 08:01:07 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-04-03 14:53:31 -0700 |
commit | ed291e8051ee418de7ccd3507c1e783323fd1c35 (patch) | |
tree | c8df539e5170a8c877181db9b86312a94e33041f /drivers | |
parent | f4b44e763d1bd1dd00213c1e5820a594b55122dc (diff) |
Staging: rt2860: Ported v1.7.1.1 changes into v1.8.0.0, becoming v1.8.1.1
Staging: rt2860: Ported v1.7.1.1 changes into v1.8.0.0, becoming v1.8.1.1
When RaLink released rt2860 v1.7.0.0, it lacked proper support for both WEP
and WPA/WPA2 encryption. Either was possible, but the module had to be
compiled to support only one or the other, never both.
Since the EeePC was the most common device with this hardware (and these
users were complaining to RaLink that WPA/WPA2 encryption didn't work)
RaLink released a fix as an "eeepc-specific" version of this driver, v1.7.1.1
Unfortunately, when v1.8.0.0 was released, this WPA/WPA2 fix was never
included.
What complicates things further is that RaLink has no interest in
continuing work on this Linux driver for their hardware.
This commit ports the changes introduced in v1.7.1.1 into the v1.8.0.0
release, upgrading the kernel's module to v1.8.1.1
Signed-off-by: Adam McDaniel <adam@array.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
21 files changed, 704 insertions, 150 deletions
diff --git a/drivers/staging/rt2860/2860_main_dev.c b/drivers/staging/rt2860/2860_main_dev.c index e2f94809ca7..ff7f8338073 100644 --- a/drivers/staging/rt2860/2860_main_dev.c +++ b/drivers/staging/rt2860/2860_main_dev.c @@ -746,6 +746,7 @@ rt2860_interrupt(int irq, void *dev_instance) PRTMP_ADAPTER pAd = net_dev->ml_priv; INT_SOURCE_CSR_STRUC IntSource; POS_COOKIE pObj; + BOOLEAN bOldValue; pObj = (POS_COOKIE) pAd->OS_Cookie; @@ -778,10 +779,13 @@ rt2860_interrupt(int irq, void *dev_instance) // RT2661 => when ASIC is sleeping, MAC register cannot be read and written. // RT2860 => when ASIC is sleeping, MAC register can be read and written. + bOldValue = pAd->bPCIclkOff; + pAd->bPCIclkOff = FALSE; { RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IntSource.word); RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word); // write 1 to clear } + pAd->bPCIclkOff = bOldValue; // Do nothing if Reset in progress if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) || @@ -796,8 +800,6 @@ rt2860_interrupt(int irq, void *dev_instance) // The priority can be adjust by altering processing if statement // - pAd->bPCIclkOff = FALSE; - // If required spinlock, each interrupt service routine has to acquire // and release itself. // @@ -806,6 +808,7 @@ rt2860_interrupt(int irq, void *dev_instance) if (IntSource.word == 0xffffffff) { RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS); + printk("snowpin - IntSource.word == 0xffffffff\n"); return IRQ_HANDLED; } diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c index b67b9eba722..14a99b3e321 100644 --- a/drivers/staging/rt2860/common/cmm_data.c +++ b/drivers/staging/rt2860/common/cmm_data.c @@ -366,7 +366,7 @@ NDIS_STATUS MlmeHardTransmitTxRing( { // outgoing frame always wakeup PHY to prevent frame lost if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); } #endif // CONFIG_STA_SUPPORT // pFirstTxWI =(PTXWI_STRUC)pSrcBufVA; @@ -541,7 +541,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( { // outgoing frame always wakeup PHY to prevent frame lost if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); } #endif // CONFIG_STA_SUPPORT // diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c index 419e50c3fc4..fae741e4bee 100644 --- a/drivers/staging/rt2860/common/cmm_data_2860.c +++ b/drivers/staging/rt2860/common/cmm_data_2860.c @@ -634,7 +634,7 @@ VOID RT28xxPciAsicRadioOff( } // Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops. - pAd->bPCIclkOffDisableTx = TRUE; + RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { @@ -651,7 +651,7 @@ VOID RT28xxPciAsicRadioOff( { DBGPRINT(RT_DEBUG_TRACE, ("TbTTTime = 0x%x , give up this sleep. \n", TbTTTime)); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - pAd->bPCIclkOffDisableTx = FALSE; + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); return; } else @@ -688,18 +688,25 @@ VOID RT28xxPciAsicRadioOff( if (i >= 50) { DBGPRINT(RT_DEBUG_TRACE, ("DMA keeps busy. return on RT28xxPciAsicRadioOff ()\n")); - pAd->bPCIclkOffDisableTx = FALSE; RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); DmaCfg.field.EnableTxDMA = 1; RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); + pAd->CheckDmaBusyCount++; return; } + else + { + pAd->CheckDmaBusyCount = 0; + } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF); // Set to 1R. - tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3); + if (pAd->Antenna.field.RxPath > 1) + { + tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3); + } // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) @@ -714,8 +721,15 @@ VOID RT28xxPciAsicRadioOff( AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel); } - // When PCI clock is off, don't want to service interrupt. - RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt); + if (Level != RTMP_HALT) + { + // Change Interrupt bitmask. + RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt); + } + else + { + NICDisableInterrupt(pAd); + } RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx); // Disable MAC Rx @@ -726,7 +740,8 @@ VOID RT28xxPciAsicRadioOff( // 2. Send Sleep command RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff); RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff); - AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout unit:40us. + // send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power + AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1); // 2-1. Wait command success // Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task. brc = AsicCheckCommanOk(pAd, PowerSafeCID); @@ -734,7 +749,7 @@ VOID RT28xxPciAsicRadioOff( if (brc == FALSE) { // try again - AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout unit:40us. + AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x01); // send POWER-SAVE command to MCU. Timeout unit:40us. //RTMPusecDelay(200); brc = AsicCheckCommanOk(pAd, PowerSafeCID); } @@ -759,7 +774,7 @@ VOID RT28xxPciAsicRadioOff( do { RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - if (DmaCfg.field.RxDMABusy == 0) + if ((DmaCfg.field.RxDMABusy == 0) && (DmaCfg.field.TxDMABusy == 0)) break; RTMPusecDelay(20); i++; @@ -767,13 +782,12 @@ VOID RT28xxPciAsicRadioOff( if (i >= 50) { + pAd->CheckDmaBusyCount++; DBGPRINT(RT_DEBUG_TRACE, ("DMA Rx keeps busy. on RT28xxPciAsicRadioOff ()\n")); } - // disable DMA Rx. + else { - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - DmaCfg.field.EnableRxDMA = 0; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); + pAd->CheckDmaBusyCount = 0; } if (Level == DOT11POWERSAVE) @@ -799,7 +813,7 @@ VOID RT28xxPciAsicRadioOff( if (Level == RTMP_HALT) { if ((brc == TRUE) && (i < 50)) - RTMPPCIeLinkCtrlSetting(pAd, 1); + RTMPPCIeLinkCtrlSetting(pAd, 0); } // 4. Set PCI configuration Space Link Comtrol fields. Only Radio Off needs to call this function else @@ -808,7 +822,7 @@ VOID RT28xxPciAsicRadioOff( RTMPPCIeLinkCtrlSetting(pAd, 3); } - pAd->bPCIclkOffDisableTx = FALSE; + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); } @@ -835,7 +849,8 @@ BOOLEAN RT28xxPciAsicRadioOn( { pAd->Mlme.bPsPollTimerRunning = FALSE; RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); - if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE)) + if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE) + || (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))) { DBGPRINT(RT_DEBUG_TRACE, ("RT28xxPciAsicRadioOn ()\n")); // 1. Set PCI Link Control in Configuration Space. @@ -845,15 +860,14 @@ BOOLEAN RT28xxPciAsicRadioOn( } pAd->bPCIclkOff = FALSE; - + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x3a80); // 2. Send wake up command. - AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00); + AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02); // 2-1. wait command ok. brv = AsicCheckCommanOk(pAd, PowerWakeCID); if (brv) { - //RTMP_IO_WRITE32(pAd, INT_MASK_CSR, (DELAYINTMASK|RxINT)); NICEnableInterrupt(pAd); // 3. Enable Tx DMA. @@ -893,13 +907,10 @@ BOOLEAN RT28xxPciAsicRadioOn( VOID RT28xxPciStaAsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx) + IN UCHAR Level) { AUTO_WAKEUP_STRUC AutoWakeupCfg; - if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - return; - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW)) { DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n")); @@ -907,38 +918,48 @@ VOID RT28xxPciStaAsicForceWakeup( } OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WAKEUP_NOW); + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { // Support PCIe Advance Power Save - if (bFromTx == TRUE) + if (((Level == FROM_TX) && (pAd->Mlme.bPsPollTimerRunning == TRUE)) || + (Level == RTMP_HALT)) { pAd->Mlme.bPsPollTimerRunning = FALSE; RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP); - RTMPusecDelay(3000); + RTMPusecDelay(5000); DBGPRINT(RT_DEBUG_TRACE, ("=======AsicForceWakeup===bFromTx\n")); } AutoWakeupCfg.word = 0; RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE)) - { - // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. - if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) - && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) - { - // Must using 40MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); - } - else - { - // Must using 20MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - } - } + // If this is called from Halt. ALWAYS force wakeup!!! + if (Level == RTMP_HALT) + { + RT28xxPciAsicRadioOn(pAd, RTMP_HALT); + } + else + { + if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE)) + { + // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. + if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) + && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + } + else + { + // Must using 20MHz. + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + } + } + } } else { @@ -1122,6 +1143,7 @@ VOID RT28xxPciMlmeRadioOn( { NICResetFromError(pAd); + /* RTMPRingCleanUp(pAd, QID_AC_BK); RTMPRingCleanUp(pAd, QID_AC_BE); RTMPRingCleanUp(pAd, QID_AC_VI); @@ -1129,6 +1151,7 @@ VOID RT28xxPciMlmeRadioOn( RTMPRingCleanUp(pAd, QID_HCCA); RTMPRingCleanUp(pAd, QID_MGMT); RTMPRingCleanUp(pAd, QID_RX); + */ // Enable Tx/Rx RTMPEnableRxTx(pAd); @@ -1162,6 +1185,12 @@ VOID RT28xxPciMlmeRadioOFF( WPDMA_GLO_CFG_STRUC GloCfg; UINT32 i; + if (pAd->StaCfg.bRadio == TRUE) + { + DBGPRINT(RT_DEBUG_TRACE,("-->MlmeRadioOff() return on bRadio == TRUE; \n")); + return; + } + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) return; @@ -1169,13 +1198,12 @@ VOID RT28xxPciMlmeRadioOFF( // Set LED RTMPSetLED(pAd, LED_RADIO_OFF); - // Set Radio off flag - RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { BOOLEAN Cancelled; + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) { RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); @@ -1185,6 +1213,15 @@ VOID RT28xxPciMlmeRadioOFF( if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { BOOLEAN Cancelled; + + // Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF).
+ if ((pAd->OpMode == OPMODE_STA) &&
+ (IDLE_ON(pAd)) &&
+ (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
+ {
+ RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
+ } + pAd->Mlme.bPsPollTimerRunning = FALSE; RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); @@ -1197,9 +1234,26 @@ VOID RT28xxPciMlmeRadioOFF( //========================================== // Clean up old bss table BssTableInit(&pAd->ScanTab); + + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) + { + RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 500); + return; + } } #endif // CONFIG_STA_SUPPORT // + // Set Radio off flag + RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); + // Disable Tx/Rx DMA RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA GloCfg.field.EnableTxDMA = 0; diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c index 40e4109118e..d29e0b630e2 100644 --- a/drivers/staging/rt2860/common/cmm_sync.c +++ b/drivers/staging/rt2860/common/cmm_sync.c @@ -470,7 +470,7 @@ VOID ScanNextChannel( { // BBP and RF are not accessible in PS mode, we has to wake them up first if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); // leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON if (pAd->StaCfg.Psm == PWR_SAVE) diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c index 81c332ac252..69baf522fa0 100644 --- a/drivers/staging/rt2860/common/cmm_wpa.c +++ b/drivers/staging/rt2860/common/cmm_wpa.c @@ -39,8 +39,10 @@ // WPA OUI UCHAR OUI_WPA_NONE_AKM[4] = {0x00, 0x50, 0xF2, 0x00}; UCHAR OUI_WPA_VERSION[4] = {0x00, 0x50, 0xF2, 0x01}; +UCHAR OUI_WPA_WEP40[4] = {0x00, 0x50, 0xF2, 0x01}; UCHAR OUI_WPA_TKIP[4] = {0x00, 0x50, 0xF2, 0x02}; UCHAR OUI_WPA_CCMP[4] = {0x00, 0x50, 0xF2, 0x04}; +UCHAR OUI_WPA_WEP104[4] = {0x00, 0x50, 0xF2, 0x05}; UCHAR OUI_WPA_8021X_AKM[4] = {0x00, 0x50, 0xF2, 0x01}; UCHAR OUI_WPA_PSK_AKM[4] = {0x00, 0x50, 0xF2, 0x02}; // WPA2 OUI @@ -49,6 +51,7 @@ UCHAR OUI_WPA2_TKIP[4] = {0x00, 0x0F, 0xAC, 0x02}; UCHAR OUI_WPA2_CCMP[4] = {0x00, 0x0F, 0xAC, 0x04}; UCHAR OUI_WPA2_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x01}; UCHAR OUI_WPA2_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x02}; +UCHAR OUI_WPA2_WEP104[4] = {0x00, 0x0F, 0xAC, 0x05}; // MSA OUI UCHAR OUI_MSA_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x05}; // Not yet final - IEEE 802.11s-D1.06 UCHAR OUI_MSA_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x06}; // Not yet final - IEEE 802.11s-D1.06 @@ -367,6 +370,24 @@ static VOID RTMPInsertRsnIeCipher( break; } +#ifdef CONFIG_STA_SUPPORT + if ((pAd->OpMode == OPMODE_STA) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled)) + { + UINT GroupCipher = pAd->StaCfg.GroupCipher; + switch(GroupCipher) + { + case Ndis802_11GroupWEP40Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP40, 4); + break; + case Ndis802_11GroupWEP104Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP104, 4); + break; + } + } +#endif // CONFIG_STA_SUPPORT // + // swap for big-endian platform pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version); pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount); @@ -427,11 +448,28 @@ static VOID RTMPInsertRsnIeCipher( break; } +#ifdef CONFIG_STA_SUPPORT + if ((pAd->OpMode == OPMODE_STA) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled)) + { + UINT GroupCipher = pAd->StaCfg.GroupCipher; + switch(GroupCipher) + { + case Ndis802_11GroupWEP40Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP40, 4); + break; + case Ndis802_11GroupWEP104Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP104, 4); + break; + } + } +#endif // CONFIG_STA_SUPPORT // + // swap for big-endian platform pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version); pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount); } - } /* diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index 229747095ae..75f810ca9ae 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -808,21 +808,35 @@ VOID MlmePeriodicExec( ULONG TxTotalCnt; PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext; + //Baron 2008/07/10 + //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); + //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. + //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1. + if(pAd->StaCfg.WepStatus<2) + { + pAd->StaCfg.WpaSupplicantUP = 0; + } + else + { + pAd->StaCfg.WpaSupplicantUP = 1; + } + #ifdef CONFIG_STA_SUPPORT #ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second. // Move code to here, because following code will return when radio is off - if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && (pAd->StaCfg.bHardwareRadio == TRUE) && + if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && + (pAd->StaCfg.bHardwareRadio == TRUE) && + (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) && - (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && - (pAd->bPCIclkOff == FALSE)) + (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))) { UINT32 data = 0; // Read GPIO pin2 as Hardware controlled radio state - RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data); + RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data); if (data & 0x04) { pAd->StaCfg.bHwRadio = TRUE; @@ -860,6 +874,45 @@ VOID MlmePeriodicExec( fRTMP_ADAPTER_RESET_IN_PROGRESS)))) return; + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE)) + { + // If ReceiveByteCount doesn't change, increase SameRxByteCount by 1. + pAd->SameRxByteCount++; + } + else + pAd->SameRxByteCount = 0; + + // If after BBP, still not work...need to check to reset PBF&MAC. + if (pAd->SameRxByteCount == 702) + { + pAd->SameRxByteCount = 0; + AsicResetPBF(pAd); + AsicResetMAC(pAd); + } + + // If SameRxByteCount keeps happens for 2 second in infra mode, or for 60 seconds in idle mode. + if (((INFRA_ON(pAd)) && (pAd->SameRxByteCount > 20)) || ((IDLE_ON(pAd)) && (pAd->SameRxByteCount > 600))) + { + if ((pAd->StaCfg.bRadio == TRUE) && (pAd->SameRxByteCount < 700)) + { + DBGPRINT(RT_DEBUG_TRACE, ("---> SameRxByteCount = %d !!!!!!!!!!!!!!! \n", pAd->SameRxByteCount)); + pAd->SameRxByteCount = 700; + AsicResetBBP(pAd); + } + } + + // Update lastReceiveByteCount. + pAd->RalinkCounters.LastReceivedByteCount = pAd->RalinkCounters.ReceivedByteCount; + + if ((pAd->CheckDmaBusyCount > 3) && (IDLE_ON(pAd))) + { + pAd->CheckDmaBusyCount = 0; + AsicResetFromDMABusy(pAd); + } + } + RT28XX_MLME_PRE_SANITY_CHECK(pAd); #ifdef RALINK_ATE @@ -1081,6 +1134,19 @@ VOID STAMlmePeriodicExec( pAd->StaCfg.bBlockAssoc = FALSE; } + //Baron 2008/07/10 + //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); + //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. + //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1. + if(pAd->StaCfg.WepStatus<2) + { + pAd->StaCfg.WpaSupplicantUP = 0; + } + else + { + pAd->StaCfg.WpaSupplicantUP = 1; + } + if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent)) { if (pAd->IndicateMediaState == NdisMediaStateConnected) @@ -1090,6 +1156,15 @@ VOID STAMlmePeriodicExec( pAd->PreMediaState = pAd->IndicateMediaState; } + if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd)) && + (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && + (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) && + (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) && + (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) && + (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))) + { + RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0); + } @@ -2781,7 +2856,7 @@ VOID MlmeCheckPsmChange( if (INFRA_ON(pAd) && (PowerMode != Ndis802_11PowerModeCAM) && (pAd->StaCfg.Psm == PWR_ACTIVE) && - (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)) + RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)) { NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime); pAd->RalinkCounters.RxCountSinceLastNULL = 0; @@ -4065,7 +4140,9 @@ VOID BssTableSsidSort( continue; // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) + if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && + (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) && + (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled)) continue; // check pairwise cipher, skip if none matched @@ -4084,7 +4161,9 @@ VOID BssTableSsidSort( continue; // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher) + if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && + (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) && + (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled)) continue; // check pairwise cipher, skip if none matched @@ -4371,8 +4450,10 @@ VOID BssCipherParse( switch (*pTmp) { case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled; + pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled; + break; + case 5: + pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled; break; case 2: pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled; @@ -4489,8 +4570,10 @@ VOID BssCipherParse( switch (pCipher->Type) { case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled; + pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled; + break; + case 5: + pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled; break; case 2: pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled; @@ -6149,6 +6232,12 @@ VOID AsicAdjustTxPower( ULONG TxPwr[5]; CHAR Value; + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) + || (pAd->bPCIclkOff == TRUE) + || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF) + || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) + return; + if (pAd->CommonCfg.BBPCurrentBW == BW_40) { if (pAd->CommonCfg.CentralChannel > 14) @@ -6493,10 +6582,10 @@ VOID AsicForceSleep( */ VOID AsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx) + IN UCHAR Level) { DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n")); - RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx); + RT28XX_STA_FORCE_WAKEUP(pAd, Level); } #endif // CONFIG_STA_SUPPORT // /* @@ -7585,9 +7674,30 @@ BOOLEAN AsicSendCommandToMcu( #endif // RALINK_ATE // #endif // RT2860 // { + UINT32 Data; + + // Reset DMA + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x2; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too. + // Reset DMA/CPU ring index + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + // Clear Reset + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data &= 0xfffffffd; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n")); } - return FALSE; + //return FALSE; } #ifdef RT2860 @@ -8518,6 +8628,106 @@ VOID AsicStaBbpTuning( } } + +VOID AsicResetFromDMABusy( + IN PRTMP_ADAPTER pAd) +{ + UINT32 Data; + BOOLEAN bCtrl = FALSE; + + DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n")); + + // Be sure restore link control value so we can write register. + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + DBGPRINT(RT_DEBUG_TRACE,("AsicResetFromDMABusy==>\n")); + RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); + RTMPusecDelay(6000); + pAd->bPCIclkOff = FALSE; + bCtrl = TRUE; + } + // Reset DMA + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x2; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too. + // Reset DMA/CPU ring index + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + // Clear Reset + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data &= 0xfffffffd; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // If in Radio off, should call RTMPPCIePowerLinkCtrl again. + if ((bCtrl == TRUE) && (pAd->StaCfg.bRadio == FALSE)) + RTMPPCIeLinkCtrlSetting(pAd, 3); + + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS); + DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + +VOID AsicResetBBP( + IN PRTMP_ADAPTER pAd) +{ + DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n")); + + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0); + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x2); + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xc); + + // After hard-reset BBP, initialize all BBP values. + NICRestoreBBPValue(pAd); + DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + +VOID AsicResetMAC( + IN PRTMP_ADAPTER pAd) +{ + ULONG Data; + + DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetMAC !!!! \n")); + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x4; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + Data &= 0xfffffffb; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetMAC !!!! \n")); +} + +VOID AsicResetPBF( + IN PRTMP_ADAPTER pAd) +{ + ULONG Value1, Value2; + ULONG Data; + + RTMP_IO_READ32(pAd, TXRXQ_PCNT, &Value1); + RTMP_IO_READ32(pAd, PBF_DBG, &Value2); + + Value2 &= 0xff; + // sum should be equals to 0xff, which is the total buffer size. + if ((Value1 + Value2) < 0xff) + { + DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset PBF !!!! \n")); + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x8; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + Data &= 0xfffffff7; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset PBF !!!! \n")); + } +} #endif // CONFIG_STA_SUPPORT // VOID RTMPSetAGCInitValue( diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index 563f2c5bb85..19a21ff489a 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -2041,6 +2041,131 @@ NDIS_STATUS NICInitializeAsic( return NDIS_STATUS_SUCCESS; } + +VOID NICRestoreBBPValue( + IN PRTMP_ADAPTER pAd) +{ + UCHAR index; + UCHAR Value; + ULONG Data; + + DBGPRINT(RT_DEBUG_TRACE, ("---> NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n")); + // Initialize BBP register to default value (rtmp_init.c) + for (index = 0; index < NUM_BBP_REG_PARMS; index++) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[index].Register, BBPRegTable[index].Value); + } + // copy from (rtmp_init.c) + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12); + } + + // copy from (connect.c LinkUp function) + if (INFRA_ON(pAd)) + { + // Change to AP channel + if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + pAd->CommonCfg.BBPCurrentBW = BW_40; + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + Value |= 0x10; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + // RX : control channel at lower + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value &= (~0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + // Record BBPR3 setting, But don't keep R Antenna # information. + pAd->StaCfg.BBPR3 = Value; + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data &= 0xfffffffe; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel )); + } + else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + pAd->CommonCfg.BBPCurrentBW = BW_40; + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + Value |= 0x10; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data |= 0x1; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value |= (0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + // Record BBPR3 setting, But don't keep R Antenna # information. + pAd->StaCfg.BBPR3 = Value; + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel )); + } + else + { + pAd->CommonCfg.BBPCurrentBW = BW_20; + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data &= 0xfffffffe; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value &= (~0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + // Record BBPR3 setting, But don't keep R Antenna # information. + pAd->StaCfg.BBPR3 = Value; + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!!20MHz LINK UP !!! \n" )); + } + } + + DBGPRINT(RT_DEBUG_TRACE, ("<--- NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + /* ======================================================================== @@ -3032,6 +3157,7 @@ VOID UserCfgInit( pAd->LedIndicatorStregth = 0; pAd->RLnkCtrlOffset = 0; pAd->HostLnkCtrlOffset = 0; + pAd->CheckDmaBusyCount = 0; #endif // RT2860 // pAd->bAutoTxAgcA = FALSE; // Default is OFF @@ -3308,7 +3434,7 @@ VOID UserCfgInit( pAd->bPCIclkOff = FALSE; #endif // RT2860 // - + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n")); } diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h index f2f91b607c4..5e6ed9f62f9 100644 --- a/drivers/staging/rt2860/oid.h +++ b/drivers/staging/rt2860/oid.h @@ -544,6 +544,8 @@ typedef enum _NDIS_802_11_WEP_STATUS Ndis802_11Encryption3KeyAbsent, Ndis802_11Encryption4Enabled, // TKIP or AES mix Ndis802_11Encryption4KeyAbsent, + Ndis802_11GroupWEP40Enabled, + Ndis802_11GroupWEP104Enabled, } NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS, NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS; diff --git a/drivers/staging/rt2860/rt2860.h b/drivers/staging/rt2860/rt2860.h index 54bac00575f..4fbec906e10 100644 --- a/drivers/staging/rt2860/rt2860.h +++ b/drivers/staging/rt2860/rt2860.h @@ -315,8 +315,8 @@ rt2860_interrupt(int irq, void *dev_instance); reg16 = cpu2le16(Configuration); \ pci_write_config_word(pci_dev, offset, reg16); \ -#define RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx) \ - RT28xxPciStaAsicForceWakeup(pAd, bFromTx); +#define RT28XX_STA_FORCE_WAKEUP(pAd, Level) \ + RT28xxPciStaAsicForceWakeup(pAd, Level); #define RT28XX_STA_SLEEP_THEN_AUTO_WAKEUP(pAd, TbttNumToNextWakeUp) \ RT28xxPciStaAsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp); diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h index 1f8cf295302..713d031c28f 100644 --- a/drivers/staging/rt2860/rt_linux.h +++ b/drivers/staging/rt2860/rt_linux.h @@ -93,7 +93,7 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_ #define STA_PROFILE_PATH "/etc/Wireless/RT2860STA/RT2860STA.dat" #define STA_RTMP_FIRMWARE_FILE_NAME "/etc/Wireless/RT2860STA/RT2860STA.bin" #define STA_NIC_DEVICE_NAME "RT2860STA" -#define STA_DRIVER_VERSION "1.8.0.0" +#define STA_DRIVER_VERSION "1.8.1.1" #ifdef MULTIPLE_CARD_SUPPORT #define CARD_INFO_PATH "/etc/Wireless/RT2860STA/RT2860STACard.dat" #endif // MULTIPLE_CARD_SUPPORT // @@ -393,6 +393,12 @@ extern ULONG RTDebugLevel; (*_pV = SWAP32(*((UINT32 *)(_pV)))); \ } \ } +#define RTMP_IO_FORCE_READ32(_A, _R, _pV) \ +{ \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + (_R)))); \ + (*_pV = SWAP32(*((UINT32 *)(_pV)))); \ +} #define RTMP_IO_READ8(_A, _R, _pV) \ { \ (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ @@ -432,6 +438,11 @@ extern ULONG RTDebugLevel; else \ *_pV = 0; \ } +#define RTMP_IO_FORCE_READ32(_A, _R, _pV) \ +{ \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + (_R)))); \ +} #define RTMP_IO_READ8(_A, _R, _pV) \ { \ (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index 246fb0a29b3..429d78d0635 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -224,15 +224,13 @@ int rt28xx_close(IN PNET_DEV dev) #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef RT2860 - RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE); -#endif // RT2860 // - // If dirver doesn't wake up firmware here, // NICLoadFirmware will hang forever when interface is up again. - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) || + RTMP_SET_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) || + RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)) { - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, RTMP_HALT); } #ifdef QOS_DLS_SUPPORT @@ -656,26 +654,6 @@ int rt28xx_open(IN PNET_DEV dev) #endif // WIRELESS_EXT >= 12 // #endif // CONFIG_APSTA_MIXED_SUPPORT // -#ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // If dirver doesn't wake up firmware here, - // NICLoadFirmware will hang forever when interface is up again. - // RT2860 PCI - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) && - OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - AUTO_WAKEUP_STRUC AutoWakeupCfg; - AsicForceWakeup(pAd, TRUE); - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - } - } -#endif // RT2860 // -#endif // CONFIG_STA_SUPPORT // - // Init pObj = (POS_COOKIE)pAd->OS_Cookie; diff --git a/drivers/staging/rt2860/rt_profile.c b/drivers/staging/rt2860/rt_profile.c index 326a3cb52b9..62141f37697 100644 --- a/drivers/staging/rt2860/rt_profile.c +++ b/drivers/staging/rt2860/rt_profile.c @@ -1451,7 +1451,7 @@ NDIS_STATUS RTMPReadParametersHook( IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { //PSMode - if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, buffer)) + if (RTMPGetKeyParameter("PSMode", tmpbuf, 32, buffer)) { if (pAd->StaCfg.BssType == BSS_INFRA) { diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index 411954206c2..bef9c199022 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -366,6 +366,13 @@ typedef struct _QUEUE_HEADER { #define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0) #define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F)) +// Macro for power save flag. +#define RTMP_SET_PSFLAG(_M, _F) ((_M)->PSFlags |= (_F)) +#define RTMP_CLEAR_PSFLAG(_M, _F) ((_M)->PSFlags &= ~(_F)) +#define RTMP_CLEAR_PSFLAGS(_M) ((_M)->PSFlags = 0) +#define RTMP_TEST_PSFLAG(_M, _F) (((_M)->PSFlags & (_F)) != 0) +#define RTMP_TEST_PSFLAGS(_M, _F) (((_M)->PSFlags & (_F)) == (_F)) + #define OPSTATUS_SET_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags |= (_F)) #define OPSTATUS_CLEAR_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F)) #define OPSTATUS_TEST_FLAG(_pAd, _F) (((_pAd)->CommonCfg.OpStatusFlags & (_F)) != 0) @@ -919,9 +926,10 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { #define STA_PORT_SECURED(_pAd) \ { \ _pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \ - NdisAcquireSpinLock(&_pAd->MacTabLock); \ + RTMP_SET_PSFLAG(_pAd, fRTMP_PS_CAN_GO_SLEEP); \ + NdisAcquireSpinLock(&(_pAd)->MacTabLock); \ _pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \ - NdisReleaseSpinLock(&_pAd->MacTabLock); \ + NdisReleaseSpinLock(&(_pAd)->MacTabLock); \ } #endif // CONFIG_STA_SUPPORT // @@ -1101,6 +1109,7 @@ typedef struct _COUNTER_802_11 { typedef struct _COUNTER_RALINK { ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput + ULONG LastReceivedByteCount; ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput ULONG BeenDisassociatedCount; ULONG BadCQIAutoRecoveryCount; @@ -2671,7 +2680,9 @@ typedef struct _RTMP_ADAPTER USHORT HostLnkCtrlOffset; USHORT PCIePowerSaveLevel; BOOLEAN bPCIclkOff; // flag that indicate if the PICE power status in Configuration SPace.. - BOOLEAN bPCIclkOffDisableTx; // + ULONG CheckDmaBusyCount; // Check Interrupt Status Register Count. + USHORT ThisTbttNumToNextWakeUp; + ULONG SameRxByteCount; /*****************************************************************************************/ @@ -2895,6 +2906,7 @@ typedef struct _RTMP_ADAPTER // flags, see fRTMP_ADAPTER_xxx flags ULONG Flags; // Represent current device status + ULONG PSFlags; // Power Save operation flag. // current TX sequence # USHORT Sequence; @@ -3550,6 +3562,9 @@ NDIS_STATUS NICInitializeAsic( IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset); +VOID NICRestoreBBPValue( + IN PRTMP_ADAPTER pAd); + VOID NICIssueReset( IN PRTMP_ADAPTER pAd); @@ -4208,7 +4223,7 @@ VOID AsicForceSleep( VOID AsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx); + IN UCHAR Level); #endif // CONFIG_STA_SUPPORT // VOID AsicSetBssid( @@ -7069,7 +7084,7 @@ BOOLEAN RT28xxPciAsicRadioOn( VOID RT28xxPciStaAsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx); + IN UCHAR Level); VOID RT28xxPciStaAsicSleepThenAutoWakeup( IN PRTMP_ADAPTER pAd, @@ -7132,6 +7147,18 @@ PCHAR RTMPGetRalinkEncryModeStr( #ifdef CONFIG_STA_SUPPORT VOID AsicStaBbpTuning( IN PRTMP_ADAPTER pAd); + +VOID AsicResetFromDMABusy( + IN PRTMP_ADAPTER pAd); + +VOID AsicResetBBP( + IN PRTMP_ADAPTER pAd); + +VOID AsicResetMAC( + IN PRTMP_ADAPTER pAd); + +VOID AsicResetPBF( + IN PRTMP_ADAPTER pAd); #endif // CONFIG_STA_SUPPORT // void RTMP_IndicateMediaState( diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h index be982147883..9532eccfd9b 100644 --- a/drivers/staging/rt2860/rtmp_def.h +++ b/drivers/staging/rt2860/rtmp_def.h @@ -212,6 +212,19 @@ #define fOP_STATUS_WAKEUP_NOW 0x00008000 #define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000 +// +// RTMP_ADAPTER PSFlags : related to advanced power save. +// +// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up +#define fRTMP_PS_CAN_GO_SLEEP 0x00000001 +// Indicate whether driver has issue a LinkControl command to PCIe L1 +#define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002 +// Indicate driver should disable kick off hardware to send packets from now. +#define fRTMP_PS_DISABLE_TX 0x00000004 +// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me +//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. +#define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008 + #ifdef DOT11N_DRAFT3 #define fOP_STATUS_SCAN_2040 0x00040000 #endif // DOT11N_DRAFT3 // @@ -1514,12 +1527,14 @@ #define MCAST_HTMIX 3 #endif // MCAST_RATE_SPECIFIC // -// For AsicRadioOff/AsicRadioOn function -#define DOT11POWERSAVE 0 -#define GUIRADIO_OFF 1 -#define RTMP_HALT 2 -#define GUI_IDLE_POWER_SAVE 3 -// -- +// For AsicRadioOff/AsicRadioOn/AsicForceWakeup function +// This is to indicate from where to call this function. +#define DOT11POWERSAVE 0 // TO do .11 power save sleep +#define GUIRADIO_OFF 1 // To perform Radio OFf command from GUI +#define RTMP_HALT 2 // Called from Halt handler. +#define GUI_IDLE_POWER_SAVE 3 // Call to sleep before link up with AP +#define FROM_TX 4 // Force wake up from Tx packet. + // definition for WpaSupport flag diff --git a/drivers/staging/rt2860/sta/assoc.c b/drivers/staging/rt2860/sta/assoc.c index 42db753eed7..34f1c1490f4 100644 --- a/drivers/staging/rt2860/sta/assoc.c +++ b/drivers/staging/rt2860/sta/assoc.c @@ -473,12 +473,7 @@ VOID MlmeAssocReqAction( RSNIe = IE_WPA2; } -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT -#ifdef SIOCSIWGENIE - if (pAd->StaCfg.WpaSupplicantUP != 1) -#endif // SIOCSIWGENIE // -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // - RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0); + RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0); // Check for WPA PMK cache list if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) @@ -504,17 +499,6 @@ VOID MlmeAssocReqAction( } } -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT -#ifdef SIOCSIWGENIE - if (pAd->StaCfg.WpaSupplicantUP == 1) - { - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - pAd->StaCfg.RSNIE_Len, pAd->StaCfg.RSN_IE, - END_OF_ARGS); - } - else -#endif -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // { MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, 1, &RSNIe, @@ -525,11 +509,6 @@ VOID MlmeAssocReqAction( FrameLen += tmp; -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT -#ifdef SIOCSIWGENIE - if (pAd->StaCfg.WpaSupplicantUP != 1) -#endif -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // { // Append Variable IE NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1); diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c index 36f28f8b4aa..bbe803312cc 100644 --- a/drivers/staging/rt2860/sta/connect.c +++ b/drivers/staging/rt2860/sta/connect.c @@ -337,6 +337,10 @@ VOID CntlOidSsidProc( MLME_DISASSOC_REQ_STRUCT DisassocReq; ULONG Now; + // BBP and RF are not accessible in PS mode, we has to wake them up first + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + AsicForceWakeup(pAd, RTMP_HALT); + // Step 1. record the desired user settings to MlmeAux NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID); NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength); @@ -1240,6 +1244,13 @@ VOID LinkUp( UCHAR Value = 0, idx; MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry; + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); + RTMPusecDelay(6000); + pAd->bPCIclkOff = FALSE; + } + pEntry = &pAd->MacTab.Content[BSSID_WCID]; // @@ -1598,6 +1609,8 @@ VOID LinkUp( IV = 0; IV |= (pAd->StaCfg.DefaultKeyId << 30); AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0); + + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); } // NOTE: // the decision of using "short slot time" or not may change dynamically due to @@ -1919,6 +1932,7 @@ VOID LinkUp( } RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); #ifdef DOT11_N_SUPPORT #ifdef DOT11N_DRAFT3 @@ -1961,6 +1975,7 @@ VOID LinkDown( IN BOOLEAN IsReqFromAP) { UCHAR i, ByteValue = 0; + BOOLEAN Cancelled; // Do nothing if monitor mode is on if (MONITOR_ON(pAd)) @@ -1972,6 +1987,12 @@ VOID LinkDown( return; #endif // RALINK_ATE // + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); + RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); + + // Not allow go to sleep within linkdown function. + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + if (pAd->CommonCfg.bWirelessEvent) { RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); @@ -1988,12 +2009,11 @@ VOID LinkDown( RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); } - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) || + RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) || + RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)) { - AUTO_WAKEUP_STRUC AutoWakeupCfg; - AsicForceWakeup(pAd, TRUE); - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); + AsicForceWakeup(pAd, RTMP_HALT); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); } @@ -2266,6 +2286,9 @@ VOID LinkDown( RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); + // Allow go to sleep after linkdown steps. + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + #ifdef WPA_SUPPLICANT_SUPPORT #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP) { diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c index 36aff247cd9..5b3fb2deee8 100644 --- a/drivers/staging/rt2860/sta/rtmp_data.c +++ b/drivers/staging/rt2860/sta/rtmp_data.c @@ -811,6 +811,13 @@ BOOLEAN STARxDoneInterruptHandle( } } + // fRTMP_PS_GO_TO_SLEEP_NOW is set if receiving beacon. + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW) && (INFRA_ON(pAd))) + { + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); + AsicSleepThenAutoWakeup(pAd, pAd->ThisTbttNumToNextWakeUp); + bReschedule = FALSE; + } return bReschedule; } @@ -828,7 +835,7 @@ BOOLEAN STARxDoneInterruptHandle( VOID RTMPHandleTwakeupInterrupt( IN PRTMP_ADAPTER pAd) { - AsicForceWakeup(pAd, FALSE); + AsicForceWakeup(pAd, DOT11POWERSAVE); } /* @@ -1889,7 +1896,8 @@ VOID STA_AMPDU_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); pAd->RalinkCounters.KickTxCount++; pAd->RalinkCounters.OneSecTxDoneCount++; @@ -2019,7 +2027,8 @@ VOID STA_AMSDU_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } #endif // DOT11_N_SUPPORT // @@ -2139,7 +2148,8 @@ VOID STA_Legacy_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } @@ -2249,7 +2259,8 @@ VOID STA_ARalink_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } @@ -2526,7 +2537,7 @@ NDIS_STATUS STAHardTransmit( if ((pAd->StaCfg.Psm == PWR_SAVE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicForceWakeup At HardTx\n")); - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); } // It should not change PSM bit, when APSD turn on. diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c index d196f85395c..28bf929cba0 100644 --- a/drivers/staging/rt2860/sta/sync.c +++ b/drivers/staging/rt2860/sta/sync.c @@ -1536,7 +1536,6 @@ VOID PeerBeacon( if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); - // Turn clk to 80Mhz. } #endif // RT2860 // if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable && @@ -1588,7 +1587,10 @@ VOID PeerBeacon( if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { - AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp); + // Set a flag to go to sleep . Then after parse this RxDoneInterrupt, will go to sleep mode. + RTMP_SET_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); + pAd->ThisTbttNumToNextWakeUp = TbttNumToNextWakeUp; + //AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp); } } } diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c index 774c6567ae5..2609d845fd5 100644 --- a/drivers/staging/rt2860/sta/wpa.c +++ b/drivers/staging/rt2860/sta/wpa.c @@ -1384,6 +1384,10 @@ VOID WpaGroupMsg1Action( pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP; else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128; //hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK); } @@ -1760,7 +1764,7 @@ BOOLEAN ParseKeyData( // Get GTK length - refer to IEEE 802.11i-2004 p.82 GTKLEN = pKDE->Len -6; - if (GTKLEN < LEN_AES_KEY) + if (GTKLEN < MIN_LEN_OF_GTK) { DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN)); return FALSE; @@ -1786,6 +1790,10 @@ BOOLEAN ParseKeyData( pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP; else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128; return TRUE; diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c index c11eeabe660..320d9b2046b 100644 --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -352,6 +352,20 @@ VOID RTMPAddKey( DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n")); + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + if (pAd->StaCfg.bRadio == FALSE) + { + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + return (NDIS_STATUS_SUCCESS); + } + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPAAddKeyProc1==>\n")); + RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); + RTMPusecDelay(6000); + pAd->bPCIclkOff = FALSE; + } + if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) { if (pKey->KeyIndex & 0x80000000) @@ -545,6 +559,8 @@ VOID RTMPAddKey( } } end: + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + DBGPRINT(RT_DEBUG_INFO, ("<------ RTMPAddKey\n")); return; } @@ -1028,6 +1044,15 @@ int rt_ioctl_siwscan(struct net_device *dev, return -EINVAL; } + if ((pAdapter->OpMode == OPMODE_STA) && (IDLE_ON(pAdapter)) + && (pAdapter->StaCfg.bRadio == TRUE) + && (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_IDLE_RADIO_OFF))) + { + RT28xxPciAsicRadioOn(pAdapter, GUI_IDLE_POWER_SAVE); + } + // Check if still radio off. + else if (pAdapter->bPCIclkOff == TRUE) + return 0; #ifdef WPA_SUPPLICANT_SUPPORT if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) @@ -2151,12 +2176,6 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, wrq->length = strlen(extra) + 1; // 1: size of '\0' break; case RAIO_ON: - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) - { - sprintf(extra, "Scanning\n"); - wrq->length = strlen(extra) + 1; // 1: size of '\0' - break; - } pAd->StaCfg.bSwRadio = TRUE; //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio)) { @@ -2440,6 +2459,20 @@ void fnSetCipherKey( IN BOOLEAN bGTK, IN struct iw_encode_ext *ext) { + RTMP_CLEAR_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); + if (RTMP_TEST_PSFLAG(pAdapter, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + if (pAdapter->StaCfg.bRadio == FALSE) + { + RTMP_SET_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); + return (NDIS_STATUS_SUCCESS); + } + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPAAddKeyProc1==>\n")); + RTMPPCIeLinkCtrlValueRestore(pAdapter, RESTORE_HALT); + RTMPusecDelay(6000); + pAdapter->bPCIclkOff = FALSE; + } + NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY)); pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK; NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK); @@ -2470,6 +2503,8 @@ void fnSetCipherKey( keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, &pAdapter->MacTab.Content[BSSID_WCID]); + + RTMP_SET_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); } int rt_ioctl_siwencodeext(struct net_device *dev, @@ -2534,6 +2569,21 @@ int rt_ioctl_siwencodeext(struct net_device *dev, NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16); NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len); + + if (pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled || + pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) + { + // Set Group key material to Asic + AsicAddSharedKeyEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, pAdapter->SharedKey[BSS0][keyIdx].Key, NULL, NULL); + + // Update WCID attribute table and IVEIV table for this group key table + RTMPAddWcidAttributeEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, NULL); + + STA_PORT_SECURED(pAdapter); + + // Indicate Connected for GUI + pAdapter->IndicateMediaState = NdisMediaStateConnected; + } break; case IW_ENCODE_ALG_TKIP: DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len)); @@ -4249,7 +4299,23 @@ INT RTMPSetInformation( } #ifdef WPA_SUPPLICANT_SUPPORT - if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) + if ((pAdapter->StaCfg.WpaSupplicantUP != 0) && + (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) + { + Key = pWepKey->KeyMaterial; + + // Set Group key material to Asic + AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL); + + // Update WCID attribute table and IVEIV table for this group key table + RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL); + + STA_PORT_SECURED(pAdapter); + + // Indicate Connected for GUI + pAdapter->IndicateMediaState = NdisMediaStateConnected; + } + else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) #endif // WPA_SUPPLICANT_SUPPORT { Key = pAdapter->SharedKey[BSS0][KeyIdx].Key; diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h index 88c7c8bf3fc..0134ae6097c 100644 --- a/drivers/staging/rt2860/wpa.h +++ b/drivers/staging/rt2860/wpa.h @@ -90,6 +90,7 @@ #define TKIP_AP_RXMICK_OFFSET (TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK) #define TKIP_GTK_LENGTH ((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK)) #define LEN_PTK ((LEN_EAP_KEY)+(LEN_TKIP_KEY)) +#define MIN_LEN_OF_GTK 5 // RSN IE Length definition #define MAX_LEN_OF_RSNIE 90 |