diff options
author | Ivo van Doorn <ivdoorn@gmail.com> | 2007-09-25 20:55:39 +0200 |
---|---|---|
committer | David S. Miller <davem@sunset.davemloft.net> | 2007-10-10 16:53:03 -0700 |
commit | 066cb637b1b562bebd09d237bfaaca6724f247e5 (patch) | |
tree | 340b3902e69246cb73e820bbd9994bd1bdcca402 /drivers | |
parent | 12dadb9009723dd0512091643e6e403f9e1b25cb (diff) |
[PATCH] rt2x00: Reorganize rt2x00dev->flags
The rt2x00dev->flags has become a chaos over time,
this will reorganize the flags by renaming, deleting, adding
and properly implement the flags.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2400pci.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2500pci.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2500usb.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00.h | 31 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00config.c | 27 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 55 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00lib.h | 3 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00mac.c | 55 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00rfkill.c | 12 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/rt2x00/rt73usb.c | 2 |
11 files changed, 115 insertions, 84 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 03a94a33e6b..faa47111a57 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1374,7 +1374,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Detect if this device has an hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); /* * Check if the BBP tuning should be enabled. @@ -1469,7 +1469,7 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * This device requires the beacon ring */ - __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); /* * Set the rssi offset. diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 892baa907a6..929257d34ae 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1545,7 +1545,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Detect if this device has an hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); /* * Check if the BBP tuning should be enabled. @@ -1801,7 +1801,7 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * This device requires the beacon ring */ - __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); /* * Set the rssi offset. diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index f4e6f6eb7fb..7aacc7b5c1b 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1573,7 +1573,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * This device requires the beacon ring */ - __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); /* * Set the rssi offset. diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 5f05c7ee0df..ea20f3adde5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -493,24 +493,21 @@ struct rt2x00_dev { * of the device capabilities are stored. */ unsigned long flags; -#define DEVICE_ENABLED_RADIO 1 -#define DEVICE_ENABLED_RADIO_HW 2 +#define DEVICE_PRESENT 1 +#define DEVICE_REGISTERED_HW 2 #define DEVICE_INITIALIZED 3 -#define DEVICE_INITIALIZED_HW 4 -#define REQUIRE_FIRMWARE 5 -/* Hole: Add new Flag here */ -#define INTERFACE_RESUME 8 -#define INTERFACE_ENABLED 9 -/* Hole: Add new Flag here */ -#define REQUIRE_BEACON_RING 11 -#define DEVICE_SUPPORT_HW_BUTTON 12 -#define CONFIG_FRAME_TYPE 13 -#define CONFIG_RF_SEQUENCE 14 -/* Hole: Add new Flag here */ -#define CONFIG_EXTERNAL_LNA_A 16 -#define CONFIG_EXTERNAL_LNA_BG 17 -#define CONFIG_DOUBLE_ANTENNA 18 -#define CONFIG_DISABLE_LINK_TUNING 19 +#define DEVICE_STARTED 4 +#define DEVICE_ENABLED_RADIO 5 +#define DEVICE_ENABLED_RADIO_HW 6 +#define DRIVER_REQUIRE_FIRMWARE 7 +#define DRIVER_REQUIRE_BEACON_RING 8 +#define CONFIG_SUPPORT_HW_BUTTON 9 +#define CONFIG_FRAME_TYPE 10 +#define CONFIG_RF_SEQUENCE 11 +#define CONFIG_EXTERNAL_LNA_A 12 +#define CONFIG_EXTERNAL_LNA_BG 13 +#define CONFIG_DOUBLE_ANTENNA 14 +#define CONFIG_DISABLE_LINK_TUNING 15 /* * Chipset identification. diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index f962ce49708..13b510687bc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -48,33 +48,20 @@ void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type) { - struct interface *intf = &rt2x00dev->interface; - - if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) && - (!!test_bit(INTERFACE_ENABLED, &rt2x00dev->flags) == - !!is_interface_present(intf))) - return; - - rt2x00dev->ops->lib->config_type(rt2x00dev, type); - - /* - * Update the configuration flags. - */ - if (is_interface_present(intf)) - __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags); - else - __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags); + if (type != INVALID_INTERFACE) + rt2x00dev->ops->lib->config_type(rt2x00dev, type); } -void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf) +void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, const int force_config) { int flags = 0; /* - * If we are in RESUME state we should - * force all configuration options. + * In some situations we want to force all configurations + * to be reloaded (When resuming for instance). */ - if (test_bit(INTERFACE_RESUME, &rt2x00dev->flags)) { + if (force_config) { flags = CONFIG_UPDATE_ALL; goto config; } diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 4f66adc5b09..f8f7e6e47f8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -40,7 +40,7 @@ struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, const unsigned int queue) { - int beacon = test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); + int beacon = test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); /* * Check if we are requesting a reqular TX ring, @@ -102,7 +102,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) * And check if the hardware button has been disabled. */ if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - (test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags) && + (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) && !test_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags))) return 0; @@ -162,6 +162,9 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable) { enum dev_state state = enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF; + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + /* * When we are disabling the RX, we should also stop the link tuner. */ @@ -721,7 +724,7 @@ exit: static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) { - if (test_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags)) + if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags)) ieee80211_unregister_hw(rt2x00dev->hw); if (likely(rt2x00dev->hwmodes)) { @@ -753,7 +756,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) return status; } - __set_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags); + __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags); return 0; } @@ -810,7 +813,7 @@ static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev) return -ENOMEM; } - if (!test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags)) + if (!test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) return 0; /* @@ -919,7 +922,7 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) * Atim: 1 (if required) */ rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues + - (2 * test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags)); + (2 * test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)); ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL); if (!ring) { @@ -932,7 +935,7 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->rx = ring; rt2x00dev->tx = &rt2x00dev->rx[1]; - if (test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags)) + if (test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues]; /* @@ -1011,6 +1014,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) */ rt2x00debug_register(rt2x00dev); + __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + return 0; exit: @@ -1022,6 +1027,8 @@ EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) { + __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); + /* * Disable radio. */ @@ -1068,6 +1075,13 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) int retval; NOTICE(rt2x00dev, "Going to sleep.\n"); + __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); + + /* + * Only continue if mac80211 has open interfaces. + */ + if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + goto exit; /* * Disable radio and unitialize all items @@ -1077,6 +1091,7 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) rt2x00lib_uninitialize(rt2x00dev); rt2x00debug_deregister(rt2x00dev); +exit: /* * Set device mode to sleep for power management. */ @@ -1094,7 +1109,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) int retval; NOTICE(rt2x00dev, "Waking up.\n"); - __set_bit(INTERFACE_RESUME, &rt2x00dev->flags); + __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); /* * Open the debugfs entry. @@ -1102,6 +1117,12 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) rt2x00debug_register(rt2x00dev); /* + * Only continue if mac80211 has open interfaces. + */ + if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + return 0; + + /* * Reinitialize device and all active interfaces. */ retval = rt2x00mac_start(rt2x00dev->hw); @@ -1111,15 +1132,23 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reconfigure device. */ - retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); - if (retval) - goto exit; + rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1); + if (!rt2x00dev->hw->conf.radio_enabled) + rt2x00lib_disable_radio(rt2x00dev); rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); rt2x00lib_config_bssid(rt2x00dev, intf->bssid); rt2x00lib_config_type(rt2x00dev, intf->type); /* + * It is possible that during that mac80211 has attempted + * to send frames while we were suspending or resuming. + * In that case we have disabled the TX queue and should + * now enable it again + */ + ieee80211_start_queues(rt2x00dev->hw); + + /* * When in Master or Ad-hoc mode, * restart Beacon transmitting by faking a beacondone event. */ @@ -1127,8 +1156,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) intf->type == IEEE80211_IF_TYPE_IBSS) rt2x00lib_beacondone(rt2x00dev); - __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags); - return 0; exit: @@ -1136,8 +1163,6 @@ exit: rt2x00lib_uninitialize(rt2x00dev); rt2x00debug_deregister(rt2x00dev); - __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags); - return retval; } EXPORT_SYMBOL_GPL(rt2x00lib_resume); diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index fcc2ffdd1a3..6dd92eb2b22 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -52,7 +52,8 @@ void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev); void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac); void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid); void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type); -void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf); +void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, const int force_config); /* * Firmware handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 17802f6d3d6..e98d013a189 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -82,6 +82,17 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, u16 frame_control; /* + * Mac80211 might be calling this function while we are trying + * to remove the device or perhaps suspending it. + * Note that we can only stop the TX queues inside the TX path + * due to possible race conditions in mac80211. + */ + if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) { + ieee80211_stop_queues(hw); + return 0; + } + + /* * Determine which ring to put packet on. */ ring = rt2x00lib_get_ring(rt2x00dev, control->queue); @@ -126,14 +137,15 @@ int rt2x00mac_start(struct ieee80211_hw *hw) struct rt2x00_dev *rt2x00dev = hw->priv; int status; - if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || + test_bit(DEVICE_STARTED, &rt2x00dev->flags)) return 0; /* * If this is the first interface which is added, * we should load the firmware now. */ - if (test_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags)) { + if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) { status = rt2x00lib_load_firmware(rt2x00dev); if (status) return status; @@ -155,6 +167,8 @@ int rt2x00mac_start(struct ieee80211_hw *hw) return status; } + __set_bit(DEVICE_STARTED, &rt2x00dev->flags); + return 0; } EXPORT_SYMBOL_GPL(rt2x00mac_start); @@ -163,11 +177,16 @@ void rt2x00mac_stop(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; + if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + return; + /* * Perhaps we can add something smarter here, * but for now just disabling the radio should do. */ rt2x00lib_disable_radio(rt2x00dev); + + __clear_bit(DEVICE_STARTED, &rt2x00dev->flags); } EXPORT_SYMBOL_GPL(rt2x00mac_stop); @@ -178,9 +197,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, struct interface *intf = &rt2x00dev->interface; /* - * We only support 1 non-monitor interface. + * Don't allow interfaces to be added while + * either the device has disappeared or when + * another interface is already present. */ - if (is_interface_present(intf)) + if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || + is_interface_present(intf)) return -ENOBUFS; intf->id = conf->if_id; @@ -208,9 +230,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, struct interface *intf = &rt2x00dev->interface; /* - * We only support 1 non-monitor interface. + * Don't allow interfaces to be remove while + * either the device has disappeared or when + * no interface is present. */ - if (!is_interface_present(intf)) + if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || + !is_interface_present(intf)) return; intf->id = 0; @@ -233,12 +258,10 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) struct rt2x00_dev *rt2x00dev = hw->priv; /* - * If the device is not initialized we shouldn't accept - * any configuration changes. Mac80211 might be calling - * this function while we are trying to remove the device - * or perhaps suspending it. + * Mac80211 might be calling this function while we are trying + * to remove the device or perhaps suspending it. */ - if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) return 0; /* @@ -252,7 +275,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) rt2x00lib_toggle_rx(rt2x00dev, 0); } - rt2x00lib_config(rt2x00dev, conf); + rt2x00lib_config(rt2x00dev, conf, 0); /* * Reenable RX only if the radio should be on. @@ -274,12 +297,10 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id, int status; /* - * If the device is not initialized we shouldn't accept - * any configuration changes. Mac80211 might be calling - * this function while we are trying to remove the device - * or perhaps suspending it. + * Mac80211 might be calling this function while we are trying + * to remove the device or perhaps suspending it. */ - if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) return 0; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index b54457c921c..06af01451cd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -45,9 +45,9 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) return 0; /* - * Only continue if we have an active interface. + * Only continue if there are enabled interfaces. */ - if (!is_interface_present(&rt2x00dev->interface)) + if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) return 0; if (state == RFKILL_STATE_ON) { @@ -76,7 +76,7 @@ int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) { int retval; - if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) return 0; retval = rfkill_register(rt2x00dev->rfkill); @@ -97,7 +97,7 @@ int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) return; input_unregister_polled_device(rt2x00dev->poll_dev); @@ -108,7 +108,7 @@ int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) { struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); - if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) return 0; rt2x00dev->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); @@ -138,7 +138,7 @@ int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) + if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) return; input_free_polled_device(rt2x00dev->poll_dev); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 3edcd743dce..4c5e317a3ad 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2105,7 +2105,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Detect if this device has an hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); /* * Read frequency offset and RF programming sequence. @@ -2360,7 +2360,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * This device requires firmware */ - __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); /* * Set the rssi offset. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index b18cc934ff8..ffed3ec5fb9 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1827,7 +1827,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * This device requires firmware */ - __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); /* * Set the rssi offset. |