Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (176 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

21 files changed, 204 insertions, 159 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8d12b26bb6c..b61f56b6f31 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -643,7 +643,7 @@ config I2C_PCA_ISA
 
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
-	depends on MV64X60 && EXPERIMENTAL
+	depends on (MV64X60 || ARCH_ORION) && EXPERIMENTAL
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Marvell 64xxx line of host bridges.
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index bb7bf68a7fb..036e6a883e6 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -1,6 +1,6 @@
 /*
- * Driver for the i2c controller on the Marvell line of host bridges for MIPS
- * and PPC (e.g, gt642[46]0, mv643[46]0, mv644[46]0).
+ * Driver for the i2c controller on the Marvell line of host bridges
+ * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
@@ -14,7 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/mv643xx.h>
+#include <linux/mv643xx_i2c.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -86,6 +86,7 @@ struct mv64xxx_i2c_data {
 	u32			cntl_bits;
 	void __iomem		*reg_base;
 	u32			reg_base_p;
+	u32			reg_size;
 	u32			addr1;
 	u32			addr2;
 	u32			bytes_left;
@@ -463,17 +464,20 @@ static int __devinit
 mv64xxx_i2c_map_regs(struct platform_device *pd,
 	struct mv64xxx_i2c_data *drv_data)
 {
-	struct resource	*r;
+	int size;
+	struct resource	*r = platform_get_resource(pd, IORESOURCE_MEM, 0);
 
-	if ((r = platform_get_resource(pd, IORESOURCE_MEM, 0)) &&
-		request_mem_region(r->start, MV64XXX_I2C_REG_BLOCK_SIZE,
-			drv_data->adapter.name)) {
+	if (!r)
+		return -ENODEV;
 
-		drv_data->reg_base = ioremap(r->start,
-			MV64XXX_I2C_REG_BLOCK_SIZE);
-		drv_data->reg_base_p = r->start;
-	} else
-		return -ENOMEM;
+	size = r->end - r->start + 1;
+
+	if (!request_mem_region(r->start, size, drv_data->adapter.name))
+		return -EBUSY;
+
+	drv_data->reg_base = ioremap(r->start, size);
+	drv_data->reg_base_p = r->start;
+	drv_data->reg_size = size;
 
 	return 0;
 }
@@ -483,8 +487,7 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
 {
 	if (drv_data->reg_base) {
 		iounmap(drv_data->reg_base);
-		release_mem_region(drv_data->reg_base_p,
-			MV64XXX_I2C_REG_BLOCK_SIZE);
+		release_mem_region(drv_data->reg_base_p, drv_data->reg_size);
 	}
 
 	drv_data->reg_base = NULL;
@@ -529,7 +532,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	drv_data->adapter.owner = THIS_MODULE;
 	drv_data->adapter.class = I2C_CLASS_HWMON;
 	drv_data->adapter.timeout = pdata->timeout;
-	drv_data->adapter.retries = pdata->retries;
 	drv_data->adapter.nr = pd->id;
 	platform_set_drvdata(pd, drv_data);
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index b1b2e07bf08..99d92f5c93d 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -74,10 +74,10 @@ extern unsigned int get_clk_frequency_khz(int info);
 
 static unsigned long calc_waittime(struct corgi_ts *corgi_ts)
 {
-	unsigned long hsync_len = corgi_ts->machinfo->get_hsync_len();
+	unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod();
 
-	if (hsync_len)
-		return get_clk_frequency_khz(0)*1000/hsync_len;
+	if (hsync_invperiod)
+		return get_clk_frequency_khz(0)*1000/hsync_invperiod;
 	else
 		return 0;
 }
@@ -114,7 +114,7 @@ static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, i
 			if (timer2-timer1 > wait_time) {
 				/* too slow - timeout, try again */
 				corgi_ts->machinfo->wait_hsync();
-				/* get OSCR */
+				/* get CCNT */
 				CCNT(timer1);
 				/* Wait after HSync */
 				CCNT(timer2);
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index b7c8e781386..61aeaf79640 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -20,7 +20,7 @@
 #include "ucb1x00.h"
 
 #define UCB1X00_ATTR(name,input)\
-static ssize_t name##_show(struct device *dev, struct device_attribute *attr,
+static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
 			   char *buf)	\
 {								\
 	struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);		\
@@ -38,17 +38,17 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2);
 
 static int ucb1x00_assabet_add(struct ucb1x00_dev *dev)
 {
-	device_create_file(&dev->ucb->dev, &device_attr_vbatt);
-	device_create_file(&dev->ucb->dev, &device_attr_vcharger);
-	device_create_file(&dev->ucb->dev, &device_attr_batt_temp);
+	device_create_file(&dev->ucb->dev, &dev_attr_vbatt);
+	device_create_file(&dev->ucb->dev, &dev_attr_vcharger);
+	device_create_file(&dev->ucb->dev, &dev_attr_batt_temp);
 	return 0;
 }
 
 static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev)
 {
-	device_remove_file(&dev->ucb->cdev, &device_attr_batt_temp);
-	device_remove_file(&dev->ucb->cdev, &device_attr_vcharger);
-	device_remove_file(&dev->ucb->cdev, &device_attr_vbatt);
+	device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp);
+	device_remove_file(&dev->ucb->dev, &dev_attr_vcharger);
+	device_remove_file(&dev->ucb->dev, &dev_attr_vbatt);
 }
 
 static struct ucb1x00_driver ucb1x00_assabet_driver = {
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 1654a333034..1ea8482037b 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -65,6 +65,8 @@ struct pxamci_host {
 	unsigned int		dma_len;
 
 	unsigned int		dma_dir;
+	unsigned int		dma_drcmrrx;
+	unsigned int		dma_drcmrtx;
 };
 
 static void pxamci_stop_clock(struct pxamci_host *host)
@@ -131,13 +133,13 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 	if (data->flags & MMC_DATA_READ) {
 		host->dma_dir = DMA_FROM_DEVICE;
 		dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
-		DRCMRTXMMC = 0;
-		DRCMRRXMMC = host->dma | DRCMR_MAPVLD;
+		DRCMR(host->dma_drcmrtx) = 0;
+		DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
 	} else {
 		host->dma_dir = DMA_TO_DEVICE;
 		dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
-		DRCMRRXMMC = 0;
-		DRCMRTXMMC = host->dma | DRCMR_MAPVLD;
+		DRCMR(host->dma_drcmrrx) = 0;
+		DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
 	}
 
 	dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
@@ -375,14 +377,23 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		if (host->clkrt == CLKRT_OFF)
 			clk_enable(host->clk);
 
-		/*
-		 * clk might result in a lower divisor than we
-		 * desire.  check for that condition and adjust
-		 * as appropriate.
-		 */
-		if (rate / clk > ios->clock)
-			clk <<= 1;
-		host->clkrt = fls(clk) - 1;
+		if (ios->clock == 26000000) {
+			/* to support 26MHz on pxa300/pxa310 */
+			host->clkrt = 7;
+		} else {
+			/* to handle (19.5MHz, 26MHz) */
+			if (!clk)
+				clk = 1;
+
+			/*
+			 * clk might result in a lower divisor than we
+			 * desire.  check for that condition and adjust
+			 * as appropriate.
+			 */
+			if (rate / clk > ios->clock)
+				clk <<= 1;
+			host->clkrt = fls(clk) - 1;
+		}
 
 		/*
 		 * we write clkrt on the next command
@@ -459,7 +470,7 @@ static int pxamci_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
 	struct pxamci_host *host = NULL;
-	struct resource *r;
+	struct resource *r, *dmarx, *dmatx;
 	int ret, irq;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -519,7 +530,8 @@ static int pxamci_probe(struct platform_device *pdev)
 	 * Calculate minimum clock rate, rounding up.
 	 */
 	mmc->f_min = (host->clkrate + 63) / 64;
-	mmc->f_max = host->clkrate;
+	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
+							  : host->clkrate;
 
 	mmc->ocr_avail = host->pdata ?
 			 host->pdata->ocr_mask :
@@ -529,6 +541,9 @@ static int pxamci_probe(struct platform_device *pdev)
 	if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) {
 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 		host->cmdat |= CMDAT_SDIO_INT_EN;
+		if (cpu_is_pxa300() || cpu_is_pxa310())
+			mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
+				     MMC_CAP_SD_HIGHSPEED;
 	}
 
 	host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
@@ -570,6 +585,20 @@ static int pxamci_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mmc);
 
+	dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmarx) {
+		ret = -ENXIO;
+		goto out;
+	}
+	host->dma_drcmrrx = dmarx->start;
+
+	dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmatx) {
+		ret = -ENXIO;
+		goto out;
+	}
+	host->dma_drcmrtx = dmatx->start;
+
 	if (host->pdata && host->pdata->init)
 		host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
 
@@ -613,8 +642,8 @@ static int pxamci_remove(struct platform_device *pdev)
 		       END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
 		       host->base + MMC_I_MASK);
 
-		DRCMRRXMMC = 0;
-		DRCMRTXMMC = 0;
+		DRCMR(host->dma_drcmrrx) = 0;
+		DRCMR(host->dma_drcmrtx) = 0;
 
 		free_irq(host->irq, host);
 		pxa_free_dma(host->dma);
diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h
index 748c7706f23..f6c2e2fcce3 100644
--- a/drivers/mmc/host/pxamci.h
+++ b/drivers/mmc/host/pxamci.h
@@ -68,7 +68,7 @@
 #define PRG_DONE		(1 << 1)
 #define DATA_TRAN_DONE		(1 << 0)
 
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define MMC_I_MASK_ALL          0x00001fff
 #else
 #define MMC_I_MASK_ALL          0x0000007f
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9af05a2f4af..a6728661c41 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -212,7 +212,7 @@ config MII
 
 config MACB
 	tristate "Atmel MACB support"
-	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
+	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
 	select PHYLIB
 	help
 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 3286d2a0a87..6a20a5491a9 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -66,6 +66,7 @@
 #include <linux/dm9000.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
 
 #include <asm/delay.h>
 #include <asm/irq.h>
@@ -113,7 +114,7 @@
 #define writesl	outsl
 #define DM9000_IRQ_FLAGS	(IRQF_SHARED | IRQF_TRIGGER_HIGH)
 #else
-#define DM9000_IRQ_FLAGS	IRQF_SHARED
+#define DM9000_IRQ_FLAGS	(IRQF_SHARED | IRQT_RISING)
 #endif
 
 /*
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 7da7589d45d..4020e9e955b 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1775,7 +1775,8 @@ static int __init smc_findirq(void __iomem *ioaddr)
  * o  actually GRAB the irq.
  * o  GRAB the region
  */
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr)
+static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+			    unsigned long irq_flags)
 {
 	struct smc_local *lp = netdev_priv(dev);
 	static int version_printed = 0;
@@ -1941,7 +1942,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr)
 	}
 
 	/* Grab the IRQ */
-      	retval = request_irq(dev->irq, &smc_interrupt, SMC_IRQ_FLAGS, dev->name, dev);
+	retval = request_irq(dev->irq, &smc_interrupt, irq_flags, dev->name, dev);
       	if (retval)
       		goto err_out;
 
@@ -2123,8 +2124,9 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
 static int smc_drv_probe(struct platform_device *pdev)
 {
 	struct net_device *ndev;
-	struct resource *res;
+	struct resource *res, *ires;
 	unsigned int __iomem *addr;
+	unsigned long irq_flags = SMC_IRQ_FLAGS;
 	int ret;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
@@ -2150,12 +2152,17 @@ static int smc_drv_probe(struct platform_device *pdev)
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 
 	ndev->dma = (unsigned char)-1;
-	ndev->irq = platform_get_irq(pdev, 0);
-	if (ndev->irq < 0) {
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
 		ret = -ENODEV;
 		goto out_free_netdev;
 	}
 
+	ndev->irq = ires->start;
+	if (SMC_IRQ_FLAGS == -1)
+		irq_flags = ires->flags & IRQF_TRIGGER_MASK;
+
 	ret = smc_request_attrib(pdev);
 	if (ret)
 		goto out_free_netdev;
@@ -2181,7 +2188,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 #endif
 
 	platform_set_drvdata(pdev, ndev);
-	ret = smc_probe(ndev, addr);
+	ret = smc_probe(ndev, addr, irq_flags);
 	if (ret != 0)
 		goto out_iounmap;
 
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 07b7f7120e3..271c28dc9ba 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -54,6 +54,7 @@
 #define SMC_outw(v, a, r)	writew(v, (a) + (r))
 #define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
+#define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
 #elif defined(CONFIG_BLACKFIN)
 
@@ -158,7 +159,7 @@
 #define SMC_outw(v, a, r)	writew(v, (a) + (r))
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
 
-#define SMC_IRQ_FLAGS		(0)
+#define SMC_IRQ_FLAGS		(-1)
 
 #elif defined(CONFIG_SA1100_ASSABET)
 
@@ -177,6 +178,7 @@
 #define SMC_outb(v, a, r)	writeb(v, (a) + (r))
 #define SMC_insb(a, r, p, l)	readsb((a) + (r), p, (l))
 #define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
+#define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
 #elif	defined(CONFIG_MACH_LOGICPD_PXA270)
 
@@ -194,7 +196,8 @@
 #elif	defined(CONFIG_ARCH_INNOKOM) || \
 	defined(CONFIG_MACH_MAINSTONE) || \
 	defined(CONFIG_ARCH_PXA_IDP) || \
-	defined(CONFIG_ARCH_RAMSES)
+	defined(CONFIG_ARCH_RAMSES) || \
+	defined(CONFIG_ARCH_PCM027)
 
 #define SMC_CAN_USE_8BIT	1
 #define SMC_CAN_USE_16BIT	1
@@ -210,6 +213,7 @@
 #define SMC_outl(v, a, r)	writel(v, (a) + (r))
 #define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
 #define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
+#define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
 /* We actually can't write halfwords properly if not word aligned */
 static inline void
@@ -238,6 +242,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_outsw(a, r, p, l)   outsw((a) + (r), p, l)
 #define SMC_outb(v, a, r)       writeb(v, (a) + (r))
 #define SMC_outw(v, a, r)       writew(v, (a) + (r))
+#define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
 #elif	defined(CONFIG_ARCH_OMAP)
 
@@ -252,17 +257,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_outw(v, a, r)	writew(v, (a) + (r))
 #define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-
-#include <asm/mach-types.h>
-#include <asm/arch/cpu.h>
-
-#define	SMC_IRQ_FLAGS (( \
-		   machine_is_omap_h2() \
-		|| machine_is_omap_h3() \
-		|| machine_is_omap_h4() \
-		|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
-	) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING)
-
+#define	SMC_IRQ_FLAGS		(-1)	/* from resource */
 
 #elif	defined(CONFIG_SH_SH4202_MICRODEV)
 
@@ -453,8 +448,7 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 #define SMC_outl(v, a, r)	writel(v, (a) + (r))
 #define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
 #define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS		(0)
+#define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
 #else
 
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 874923fcb2f..e439044d88f 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -29,6 +29,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 6f1e9a9804b..2eb38520f0c 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -337,6 +337,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
 
+	device_init_wakeup(&pdev->dev, 1);
+
 	platform_set_drvdata(pdev, rtc);
 
 	return 0;
@@ -352,9 +354,38 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (pdev->dev.power.power_state.event != state.event) {
+		if (state.event == PM_EVENT_SUSPEND &&
+		    device_may_wakeup(&pdev->dev))
+			enable_irq_wake(IRQ_RTCAlrm);
+
+		pdev->dev.power.power_state = state;
+	}
+	return 0;
+}
+
+static int sa1100_rtc_resume(struct platform_device *pdev)
+{
+	if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
+		if (device_may_wakeup(&pdev->dev))
+			disable_irq_wake(IRQ_RTCAlrm);
+		pdev->dev.power.power_state = PMSG_ON;
+	}
+	return 0;
+}
+#else
+#define sa1100_rtc_suspend	NULL
+#define sa1100_rtc_resume	NULL
+#endif
+
 static struct platform_driver sa1100_rtc_driver = {
 	.probe		= sa1100_rtc_probe,
 	.remove		= sa1100_rtc_remove,
+	.suspend	= sa1100_rtc_suspend,
+	.resume		= sa1100_rtc_resume,
 	.driver		= {
 		.name		= "sa1100-rtc",
 	},
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index facb6785561..6a48dfa1efe 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -277,6 +277,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
 
+	tty_encode_baud_rate(tty,  baud, baud);
+
 	/*
 	 * Which character status flags should we ignore?
 	 */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index abf05048c63..aaaea81e412 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -153,6 +153,7 @@ config SPI_OMAP24XX
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+	select PXA_SSP
 	help
 	  This enables using a PXA2xx SSP port as a SPI master controller.
 	  The driver can be configured to use any SSP port and additional
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 1c2ab541d37..eb817b8eb02 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -27,6 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -36,6 +37,8 @@
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/ssp.h>
 #include <asm/arch/pxa2xx_spi.h>
 
 MODULE_AUTHOR("Stephen Street");
@@ -80,6 +83,9 @@ struct driver_data {
 	/* Driver model hookup */
 	struct platform_device *pdev;
 
+	/* SSP Info */
+	struct ssp_device *ssp;
+
 	/* SPI framework hookup */
 	enum pxa_ssp_type ssp_type;
 	struct spi_master *master;
@@ -778,6 +784,16 @@ int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi,
 	return retval;
 }
 
+static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
+{
+	unsigned long ssp_clk = clk_get_rate(ssp->clk);
+
+	if (ssp->type == PXA25x_SSP)
+		return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
+	else
+		return ((ssp_clk / rate - 1) & 0xfff) << 8;
+}
+
 static void pump_transfers(unsigned long data)
 {
 	struct driver_data *drv_data = (struct driver_data *)data;
@@ -785,6 +801,7 @@ static void pump_transfers(unsigned long data)
 	struct spi_transfer *transfer = NULL;
 	struct spi_transfer *previous = NULL;
 	struct chip_data *chip = NULL;
+	struct ssp_device *ssp = drv_data->ssp;
 	void *reg = drv_data->ioaddr;
 	u32 clk_div = 0;
 	u8 bits = 0;
@@ -866,12 +883,7 @@ static void pump_transfers(unsigned long data)
 		if (transfer->bits_per_word)
 			bits = transfer->bits_per_word;
 
-		if (reg == SSP1_VIRT)
-			clk_div = SSP1_SerClkDiv(speed);
-		else if (reg == SSP2_VIRT)
-			clk_div = SSP2_SerClkDiv(speed);
-		else if (reg == SSP3_VIRT)
-			clk_div = SSP3_SerClkDiv(speed);
+		clk_div = ssp_get_clk_div(ssp, speed);
 
 		if (bits <= 8) {
 			drv_data->n_bytes = 1;
@@ -1074,6 +1086,7 @@ static int setup(struct spi_device *spi)
 	struct pxa2xx_spi_chip *chip_info = NULL;
 	struct chip_data *chip;
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	struct ssp_device *ssp = drv_data->ssp;
 	unsigned int clk_div;
 
 	if (!spi->bits_per_word)
@@ -1157,18 +1170,7 @@ static int setup(struct spi_device *spi)
 		}
 	}
 
-	if (drv_data->ioaddr == SSP1_VIRT)
-		clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
-	else if (drv_data->ioaddr == SSP2_VIRT)
-		clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
-	else if (drv_data->ioaddr == SSP3_VIRT)
-		clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
-	else
-	{
-		dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n",
-			drv_data->ioaddr);
-		return -ENODEV;
-	}
+	clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
 	chip->speed_hz = spi->max_speed_hz;
 
 	chip->cr0 = clk_div
@@ -1183,15 +1185,15 @@ static int setup(struct spi_device *spi)
 
 	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
 	if (drv_data->ssp_type != PXA25x_SSP)
-		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+		dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
 				spi->bits_per_word,
-				(CLOCK_SPEED_HZ)
+				clk_get_rate(ssp->clk)
 					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
 				spi->mode & 0x3);
 	else
-		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+		dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
 				spi->bits_per_word,
-				(CLOCK_SPEED_HZ/2)
+				clk_get_rate(ssp->clk)
 					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
 				spi->mode & 0x3);
 
@@ -1323,14 +1325,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	struct pxa2xx_spi_master *platform_info;
 	struct spi_master *master;
 	struct driver_data *drv_data = 0;
-	struct resource *memory_resource;
-	int irq;
+	struct ssp_device *ssp;
 	int status = 0;
 
 	platform_info = dev->platform_data;
 
-	if (platform_info->ssp_type == SSP_UNDEFINED) {
-		dev_err(&pdev->dev, "undefined SSP\n");
+	ssp = ssp_request(pdev->id, pdev->name);
+	if (ssp == NULL) {
+		dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
 		return -ENODEV;
 	}
 
@@ -1338,12 +1340,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
 	if (!master) {
 		dev_err(&pdev->dev, "can not alloc spi_master\n");
+		ssp_free(ssp);
 		return -ENOMEM;
 	}
 	drv_data = spi_master_get_devdata(master);
 	drv_data->master = master;
 	drv_data->master_info = platform_info;
 	drv_data->pdev = pdev;
+	drv_data->ssp = ssp;
 
 	master->bus_num = pdev->id;
 	master->num_chipselect = platform_info->num_chipselect;
@@ -1351,21 +1355,13 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	master->setup = setup;
 	master->transfer = transfer;
 
-	drv_data->ssp_type = platform_info->ssp_type;
+	drv_data->ssp_type = ssp->type;
 	drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
 						sizeof(struct driver_data)), 8);
 
-	/* Setup register addresses */
-	memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!memory_resource) {
-		dev_err(&pdev->dev, "memory resources not defined\n");
-		status = -ENODEV;
-		goto out_error_master_alloc;
-	}
-
-	drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
-	drv_data->ssdr_physical = memory_resource->start + 0x00000010;
-	if (platform_info->ssp_type == PXA25x_SSP) {
+	drv_data->ioaddr = ssp->mmio_base;
+	drv_data->ssdr_physical = ssp->phys_base + SSDR;
+	if (ssp->type == PXA25x_SSP) {
 		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
 		drv_data->dma_cr1 = 0;
 		drv_data->clear_sr = SSSR_ROR;
@@ -1377,15 +1373,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 		drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
 	}
 
-	/* Attach to IRQ */
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "irq resource not defined\n");
-		status = -ENODEV;
-		goto out_error_master_alloc;
-	}
-
-	status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
+	status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data);
 	if (status < 0) {
 		dev_err(&pdev->dev, "can not get IRQ\n");
 		goto out_error_master_alloc;
@@ -1418,29 +1406,12 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 			goto out_error_dma_alloc;
 		}
 
-		if (drv_data->ioaddr == SSP1_VIRT) {
-				DRCMRRXSSDR = DRCMR_MAPVLD
-						| drv_data->rx_channel;
-				DRCMRTXSSDR = DRCMR_MAPVLD
-						| drv_data->tx_channel;
-		} else if (drv_data->ioaddr == SSP2_VIRT) {
-				DRCMRRXSS2DR = DRCMR_MAPVLD
-						| drv_data->rx_channel;
-				DRCMRTXSS2DR = DRCMR_MAPVLD
-						| drv_data->tx_channel;
-		} else if (drv_data->ioaddr == SSP3_VIRT) {
-				DRCMRRXSS3DR = DRCMR_MAPVLD
-						| drv_data->rx_channel;
-				DRCMRTXSS3DR = DRCMR_MAPVLD
-						| drv_data->tx_channel;
-		} else {
-			dev_err(dev, "bad SSP type\n");
-			goto out_error_dma_alloc;
-		}
+		DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
+		DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
 	}
 
 	/* Enable SOC clock */
-	pxa_set_cken(platform_info->clock_enable, 1);
+	clk_enable(ssp->clk);
 
 	/* Load default SSP configuration */
 	write_SSCR0(0, drv_data->ioaddr);
@@ -1479,7 +1450,7 @@ out_error_queue_alloc:
 	destroy_queue(drv_data);
 
 out_error_clock_enabled:
-	pxa_set_cken(platform_info->clock_enable, 0);
+	clk_disable(ssp->clk);
 
 out_error_dma_alloc:
 	if (drv_data->tx_channel != -1)
@@ -1488,17 +1459,18 @@ out_error_dma_alloc:
 		pxa_free_dma(drv_data->rx_channel);
 
 out_error_irq_alloc:
-	free_irq(irq, drv_data);
+	free_irq(ssp->irq, drv_data);
 
 out_error_master_alloc:
 	spi_master_put(master);
+	ssp_free(ssp);
 	return status;
 }
 
 static int pxa2xx_spi_remove(struct platform_device *pdev)
 {
 	struct driver_data *drv_data = platform_get_drvdata(pdev);
-	int irq;
+	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
 	if (!drv_data)
@@ -1520,28 +1492,21 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
 
 	/* Disable the SSP at the peripheral and SOC level */
 	write_SSCR0(0, drv_data->ioaddr);
-	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+	clk_disable(ssp->clk);
 
 	/* Release DMA */
 	if (drv_data->master_info->enable_dma) {
-		if (drv_data->ioaddr == SSP1_VIRT) {
-			DRCMRRXSSDR = 0;
-			DRCMRTXSSDR = 0;
-		} else if (drv_data->ioaddr == SSP2_VIRT) {
-			DRCMRRXSS2DR = 0;
-			DRCMRTXSS2DR = 0;
-		} else if (drv_data->ioaddr == SSP3_VIRT) {
-			DRCMRRXSS3DR = 0;
-			DRCMRTXSS3DR = 0;
-		}
+		DRCMR(ssp->drcmr_rx) = 0;
+		DRCMR(ssp->drcmr_tx) = 0;
 		pxa_free_dma(drv_data->tx_channel);
 		pxa_free_dma(drv_data->rx_channel);
 	}
 
 	/* Release IRQ */
-	irq = platform_get_irq(pdev, 0);
-	if (irq >= 0)
-		free_irq(irq, drv_data);
+	free_irq(ssp->irq, drv_data);
+
+	/* Release SSP */
+	ssp_free(ssp);
 
 	/* Disconnect from the SPI framework */
 	spi_unregister_master(drv_data->master);
@@ -1576,6 +1541,7 @@ static int suspend_devices(struct device *dev, void *pm_message)
 static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
 	/* Check all childern for current power state */
@@ -1588,7 +1554,7 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 	if (status != 0)
 		return status;
 	write_SSCR0(0, drv_data->ioaddr);
-	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+	clk_disable(ssp->clk);
 
 	return 0;
 }
@@ -1596,10 +1562,11 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 static int pxa2xx_spi_resume(struct platform_device *pdev)
 {
 	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
 	/* Enable the SSP clock */
-	pxa_set_cken(drv_data->master_info->clock_enable, 1);
+	clk_disable(ssp->clk);
 
 	/* Start the queue running */
 	status = start_queue(drv_data);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7580aa5da0f..7a6499008b8 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -33,6 +33,7 @@ config USB_ARCH_HAS_OHCI
 	default y if ARCH_LH7A404
 	default y if ARCH_S3C2410
 	default y if PXA27x
+	default y if PXA3xx
 	default y if ARCH_EP93XX
 	default y if ARCH_AT91
 	default y if ARCH_PNX4008
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f81d08d6538..77a3759d6fc 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -308,7 +308,7 @@ config USB_S3C2410_DEBUG
 
 config USB_GADGET_AT91
 	boolean "AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL
+	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
 	select USB_GADGET_SELECTED
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ecfe800fd72..ddd4ee1f241 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -997,7 +997,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_lh7a404_driver
 #endif
 
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #include "ohci-pxa27x.c"
 #define PLATFORM_DRIVER		ohci_hcd_pxa27x_driver
 #endif
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 23d2fe5a62f..ff9a7984347 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/signal.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
@@ -32,6 +33,8 @@
 
 #define UHCRHPS(x)              __REG2( 0x4C000050, (x)<<2 )
 
+static struct clk *usb_clk;
+
 /*
   PMM_NPS_MODE -- PMM Non-power switching mode
       Ports are powered continuously.
@@ -80,7 +83,7 @@ static int pxa27x_start_hc(struct device *dev)
 
 	inf = dev->platform_data;
 
-	pxa_set_cken(CKEN_USBHOST, 1);
+	clk_enable(usb_clk);
 
 	UHCHR |= UHCHR_FHR;
 	udelay(11);
@@ -123,7 +126,7 @@ static void pxa27x_stop_hc(struct device *dev)
 	UHCCOMS |= 1;
 	udelay(10);
 
-	pxa_set_cken(CKEN_USBHOST, 0);
+	clk_disable(usb_clk);
 }
 
 
@@ -158,6 +161,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 		return -ENOMEM;
 	}
 
+	usb_clk = clk_get(&pdev->dev, "USBCLK");
+	if (IS_ERR(usb_clk))
+		return PTR_ERR(usb_clk);
+
 	hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
 	if (!hcd)
 		return -ENOMEM;
@@ -201,6 +208,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
 	usb_put_hcd(hcd);
+	clk_put(usb_clk);
 	return retval;
 }
 
@@ -225,6 +233,7 @@ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
+	clk_put(usb_clk);
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5b3dbcfcda4..758435f8a6f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -889,7 +889,7 @@ config FB_S1D13XXX
 
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 7c30cc8df71..f8e71114750 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -30,7 +30,7 @@
 #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
 #define ATMEL_LCDC_DMA_BURST_LEN	8
 
-#if defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
 #define ATMEL_LCDC_FIFO_SIZE		2048
 #else
 #define ATMEL_LCDC_FIFO_SIZE		512