Merge branch 'master'

111 files changed, 8725 insertions, 5187 deletions

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 6a4da417c16..606f8733a77 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -28,6 +28,7 @@
 #include <linux/list.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 #include <linux/device.h>
 #include <linux/proc_fs.h>
 #ifdef CONFIG_X86
@@ -754,7 +755,7 @@ static int __init acpi_init(void)
 	result = acpi_bus_init();
 
 	if (!result) {
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 		if (!PM_IS_ACTIVE())
 			pm_active = 1;
 		else {
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 98f6c02d679..59dacb6552c 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -526,18 +526,23 @@ request_firmware_work_func(void *arg)
 {
 	struct firmware_work *fw_work = arg;
 	const struct firmware *fw;
+	int ret;
 	if (!arg) {
 		WARN_ON(1);
 		return 0;
 	}
 	daemonize("%s/%s", "firmware", fw_work->name);
-	_request_firmware(&fw, fw_work->name, fw_work->device,
+	ret = _request_firmware(&fw, fw_work->name, fw_work->device,
 		fw_work->hotplug);
-	fw_work->cont(fw, fw_work->context);
-	release_firmware(fw);
+	if (ret < 0)
+		fw_work->cont(NULL, fw_work->context);
+	else {
+		fw_work->cont(fw, fw_work->context);
+		release_firmware(fw);
+	}
 	module_put(fw_work->module);
 	kfree(fw_work);
-	return 0;
+	return ret;
 }
 
 /**
@@ -586,6 +591,8 @@ request_firmware_nowait(
 
 	if (ret < 0) {
 		fw_work->cont(NULL, fw_work->context);
+		module_put(fw_work->module);
+		kfree(fw_work);
 		return ret;
 	}
 	return 0;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 59e5982a5db..c0233efabeb 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -1188,7 +1188,7 @@ static void pkt_count_states(struct pktcdvd_device *pd, int *states)
 	struct packet_data *pkt;
 	int i;
 
-	for (i = 0; i <= PACKET_NUM_STATES; i++)
+	for (i = 0; i < PACKET_NUM_STATES; i++)
 		states[i] = 0;
 
 	spin_lock(&pd->cdrw.active_list_lock);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index fdf4370db99..970f70d498f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -735,7 +735,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32 && !SPARC64
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 78ce98a69f3..76589782adc 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -57,9 +57,8 @@ static int nr_garts;
 static struct pci_dev * hammers[MAX_HAMMER_GARTS];
 
 static struct resource *aperture_resource;
-static int __initdata agp_try_unsupported;
+static int __initdata agp_try_unsupported = 1;
 
-static int gart_iterator;
 #define for_each_nb() for(gart_iterator=0;gart_iterator<nr_garts;gart_iterator++)
 
 static void flush_amd64_tlb(struct pci_dev *dev)
@@ -73,6 +72,7 @@ static void flush_amd64_tlb(struct pci_dev *dev)
 
 static void amd64_tlbflush(struct agp_memory *temp)
 {
+	int gart_iterator;
 	for_each_nb()
 		flush_amd64_tlb(hammers[gart_iterator]);
 }
@@ -222,6 +222,7 @@ static struct aper_size_info_32 amd_8151_sizes[7] =
 static int amd_8151_configure(void)
 {
 	unsigned long gatt_bus = virt_to_gart(agp_bridge->gatt_table_real);
+	int gart_iterator;
 
 	/* Configure AGP regs in each x86-64 host bridge. */
 	for_each_nb() {
@@ -235,7 +236,7 @@ static int amd_8151_configure(void)
 static void amd64_cleanup(void)
 {
 	u32 tmp;
-
+	int gart_iterator;
 	for_each_nb() {
 		/* disable gart translation */
 		pci_read_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, &tmp);
@@ -697,6 +698,16 @@ static struct pci_device_id agp_amd64_pci_table[] = {
 	.subvendor	= PCI_ANY_ID,
 	.subdevice	= PCI_ANY_ID,
 	},
+	/* ALI/ULI M1695 */
+	{
+	.class		= (PCI_CLASS_BRIDGE_HOST << 8),
+	.class_mask	= ~0,
+	.vendor		= PCI_VENDOR_ID_AL,
+	.device		= 0x1689,
+	.subvendor	= PCI_ANY_ID,
+	.subdevice	= PCI_ANY_ID,
+	},
+
 	{ }
 };
 
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index c8255312b8c..50947e38501 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -557,6 +557,10 @@ static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = {
 		.device_id	= PCI_DEVICE_ID_APPLE_U3H_AGP,
 		.chipset_name	= "U3H",
 	},
+	{
+		.device_id	= PCI_DEVICE_ID_APPLE_IPID2_AGP,
+		.chipset_name	= "UniNorth/Intrepid2",
+	},
 };
 
 static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index 6c4b3f986d0..f3c3aaf4560 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -99,7 +99,9 @@ struct smm_regs {
 
 static inline char *i8k_get_dmi_data(int field)
 {
-	return dmi_get_system_info(field) ? : "N/A";
+	char *dmi_data = dmi_get_system_info(field);
+
+	return dmi_data && *dmi_data ? dmi_data : "?";
 }
 
 /*
@@ -396,7 +398,7 @@ static int i8k_proc_show(struct seq_file *seq, void *offset)
 	return seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n",
 			  I8K_PROC_FMT,
 			  bios_version,
-			  dmi_get_system_info(DMI_PRODUCT_SERIAL) ? : "N/A",
+			  i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
 			  cpu_temp,
 			  left_fan, right_fan, left_speed, right_speed,
 			  ac_power, fn_key);
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index d22bfdc1356..27c1179ee52 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -18,5 +18,29 @@ config SYNCLINK_CS
 	  The module will be called synclinkmp.  If you want to do that, say M
 	  here.
 
+config CARDMAN_4000
+	tristate "Omnikey Cardman 4000 support"
+	depends on PCMCIA
+	help
+	  Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard
+	  reader.
+
+	  This kernel driver requires additional userspace support, either
+	  by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
+	  or via the cm4000 backend of OpenCT (http://www.opensc.com/).
+
+config CARDMAN_4040
+	tristate "Omnikey CardMan 4040 support"
+	depends on PCMCIA
+	help
+	  Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
+	  reader.
+
+	  This card is basically a USB CCID device connected to a FIFO
+	  in I/O space.  To use the kernel driver, you will need either the
+	  PC/SC ifdhandler provided from the Omnikey homepage
+	  (http://www.omnikey.com/), or a current development version of OpenCT
+	  (http://www.opensc.org/).
+
 endmenu
 
diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile
index 1fcd4c59195..0aae20985d5 100644
--- a/drivers/char/pcmcia/Makefile
+++ b/drivers/char/pcmcia/Makefile
@@ -5,3 +5,5 @@
 #
 
 obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
+obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o
+obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
new file mode 100644
index 00000000000..ef011ef5dc4
--- /dev/null
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -0,0 +1,2078 @@
+ /*
+  * A driver for the PCMCIA Smartcard Reader "Omnikey CardMan Mobile 4000"
+  *
+  * cm4000_cs.c support.linux@omnikey.com
+  *
+  * Tue Oct 23 11:32:43 GMT 2001 herp - cleaned up header files
+  * Sun Jan 20 10:11:15 MET 2002 herp - added modversion header files
+  * Thu Nov 14 16:34:11 GMT 2002 mh   - added PPS functionality
+  * Tue Nov 19 16:36:27 GMT 2002 mh   - added SUSPEND/RESUME functionailty
+  * Wed Jul 28 12:55:01 CEST 2004 mh  - kernel 2.6 adjustments
+  *
+  * current version: 2.4.0gm4
+  *
+  * (C) 2000,2001,2002,2003,2004 Omnikey AG
+  *
+  * (C) 2005 Harald Welte <laforge@gnumonks.org>
+  * 	- Adhere to Kernel CodingStyle
+  * 	- Port to 2.6.13 "new" style PCMCIA
+  * 	- Check for copy_{from,to}_user return values
+  * 	- Use nonseekable_open()
+  *
+  * All rights reserved. Licensed under dual BSD/GPL license.
+  */
+
+/* #define PCMCIA_DEBUG 6 */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <linux/cm4000_cs.h>
+
+/* #define ATR_CSUM */
+
+#ifdef PCMCIA_DEBUG
+#define reader_to_dev(x)	(&handle_to_dev(x->link.handle))
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0600);
+#define DEBUGP(n, rdr, x, args...) do { 				\
+	if (pc_debug >= (n))						\
+		dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, 	\
+			   __FUNCTION__ , ## args);			\
+	} while (0)
+#else
+#define DEBUGP(n, rdr, x, args...)
+#endif
+static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte";
+
+#define	T_1SEC		(HZ)
+#define	T_10MSEC	msecs_to_jiffies(10)
+#define	T_20MSEC	msecs_to_jiffies(20)
+#define	T_40MSEC	msecs_to_jiffies(40)
+#define	T_50MSEC	msecs_to_jiffies(50)
+#define	T_100MSEC	msecs_to_jiffies(100)
+#define	T_500MSEC	msecs_to_jiffies(500)
+
+static void cm4000_detach(dev_link_t *link);
+static void cm4000_release(dev_link_t *link);
+
+static int major;		/* major number we get from the kernel */
+
+/* note: the first state has to have number 0 always */
+
+#define	M_FETCH_ATR	0
+#define	M_TIMEOUT_WAIT	1
+#define	M_READ_ATR_LEN	2
+#define	M_READ_ATR	3
+#define	M_ATR_PRESENT	4
+#define	M_BAD_CARD	5
+#define M_CARDOFF	6
+
+#define	LOCK_IO			0
+#define	LOCK_MONITOR		1
+
+#define IS_AUTOPPS_ACT		 6
+#define	IS_PROCBYTE_PRESENT	 7
+#define	IS_INVREV		 8
+#define IS_ANY_T0		 9
+#define	IS_ANY_T1		10
+#define	IS_ATR_PRESENT		11
+#define	IS_ATR_VALID		12
+#define	IS_CMM_ABSENT		13
+#define	IS_BAD_LENGTH		14
+#define	IS_BAD_CSUM		15
+#define	IS_BAD_CARD		16
+
+#define REG_FLAGS0(x)		(x + 0)
+#define REG_FLAGS1(x)		(x + 1)
+#define REG_NUM_BYTES(x)	(x + 2)
+#define REG_BUF_ADDR(x)		(x + 3)
+#define REG_BUF_DATA(x)		(x + 4)
+#define REG_NUM_SEND(x)		(x + 5)
+#define REG_BAUDRATE(x)		(x + 6)
+#define REG_STOPBITS(x)		(x + 7)
+
+struct cm4000_dev {
+	dev_link_t link;		/* pcmcia link */
+	dev_node_t node;		/* OS node (major,minor) */
+
+	unsigned char atr[MAX_ATR];
+	unsigned char rbuf[512];
+	unsigned char sbuf[512];
+
+	wait_queue_head_t devq;		/* when removing cardman must not be
+					   zeroed! */
+
+	wait_queue_head_t ioq;		/* if IO is locked, wait on this Q */
+	wait_queue_head_t atrq;		/* wait for ATR valid */
+	wait_queue_head_t readq;	/* used by write to wake blk.read */
+
+	/* warning: do not move this fields.
+	 * initialising to zero depends on it - see ZERO_DEV below.  */
+	unsigned char atr_csum;
+	unsigned char atr_len_retry;
+	unsigned short atr_len;
+	unsigned short rlen;	/* bytes avail. after write */
+	unsigned short rpos;	/* latest read pos. write zeroes */
+	unsigned char procbyte;	/* T=0 procedure byte */
+	unsigned char mstate;	/* state of card monitor */
+	unsigned char cwarn;	/* slow down warning */
+	unsigned char flags0;	/* cardman IO-flags 0 */
+	unsigned char flags1;	/* cardman IO-flags 1 */
+	unsigned int mdelay;	/* variable monitor speeds, in jiffies */
+
+	unsigned int baudv;	/* baud value for speed */
+	unsigned char ta1;
+	unsigned char proto;	/* T=0, T=1, ... */
+	unsigned long flags;	/* lock+flags (MONITOR,IO,ATR) * for concurrent
+				   access */
+
+	unsigned char pts[4];
+
+	struct timer_list timer;	/* used to keep monitor running */
+	int monitor_running;
+};
+
+#define	ZERO_DEV(dev)  						\
+	memset(&dev->atr_csum,0,				\
+		sizeof(struct cm4000_dev) - 			\
+		/*link*/ sizeof(dev_link_t) - 			\
+		/*node*/ sizeof(dev_node_t) - 			\
+		/*atr*/ MAX_ATR*sizeof(char) - 			\
+		/*rbuf*/ 512*sizeof(char) - 			\
+		/*sbuf*/ 512*sizeof(char) - 			\
+		/*queue*/ 4*sizeof(wait_queue_head_t))
+
+static dev_info_t dev_info = MODULE_NAME;
+static dev_link_t *dev_table[CM4000_MAX_DEV];
+
+/* This table doesn't use spaces after the comma between fields and thus
+ * violates CodingStyle.  However, I don't really think wrapping it around will
+ * make it any clearer to read -HW */
+static unsigned char fi_di_table[10][14] = {
+/*FI     00   01   02   03   04   05   06   07   08   09   10   11   12   13 */
+/*DI */
+/* 0 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
+/* 1 */ {0x01,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x91,0x11,0x11,0x11,0x11},
+/* 2 */ {0x02,0x12,0x22,0x32,0x11,0x11,0x11,0x11,0x11,0x92,0xA2,0xB2,0x11,0x11},
+/* 3 */ {0x03,0x13,0x23,0x33,0x43,0x53,0x63,0x11,0x11,0x93,0xA3,0xB3,0xC3,0xD3},
+/* 4 */ {0x04,0x14,0x24,0x34,0x44,0x54,0x64,0x11,0x11,0x94,0xA4,0xB4,0xC4,0xD4},
+/* 5 */ {0x00,0x15,0x25,0x35,0x45,0x55,0x65,0x11,0x11,0x95,0xA5,0xB5,0xC5,0xD5},
+/* 6 */ {0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x11,0x11,0x96,0xA6,0xB6,0xC6,0xD6},
+/* 7 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
+/* 8 */ {0x08,0x11,0x28,0x38,0x48,0x58,0x68,0x11,0x11,0x98,0xA8,0xB8,0xC8,0xD8},
+/* 9 */ {0x09,0x19,0x29,0x39,0x49,0x59,0x69,0x11,0x11,0x99,0xA9,0xB9,0xC9,0xD9}
+};
+
+#ifndef PCMCIA_DEBUG
+#define	xoutb	outb
+#define	xinb	inb
+#else
+static inline void xoutb(unsigned char val, unsigned short port)
+{
+	if (pc_debug >= 7)
+		printk(KERN_DEBUG "outb(val=%.2x,port=%.4x)\n", val, port);
+	outb(val, port);
+}
+static inline unsigned char xinb(unsigned short port)
+{
+	unsigned char val;
+
+	val = inb(port);
+	if (pc_debug >= 7)
+		printk(KERN_DEBUG "%.2x=inb(%.4x)\n", val, port);
+
+	return val;
+}
+#endif
+
+#define	b_0000	15
+#define	b_0001	14
+#define	b_0010	13
+#define	b_0011	12
+#define	b_0100	11
+#define	b_0101	10
+#define	b_0110	9
+#define	b_0111	8
+#define	b_1000	7
+#define	b_1001	6
+#define	b_1010	5
+#define	b_1011	4
+#define	b_1100	3
+#define	b_1101	2
+#define	b_1110	1
+#define	b_1111	0
+
+static unsigned char irtab[16] = {
+	b_0000, b_1000, b_0100, b_1100,
+	b_0010, b_1010, b_0110, b_1110,
+	b_0001, b_1001, b_0101, b_1101,
+	b_0011, b_1011, b_0111, b_1111
+};
+
+static void str_invert_revert(unsigned char *b, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		b[i] = (irtab[b[i] & 0x0f] << 4) | irtab[b[i] >> 4];
+}
+
+static unsigned char invert_revert(unsigned char ch)
+{
+	return (irtab[ch & 0x0f] << 4) | irtab[ch >> 4];
+}
+
+#define	ATRLENCK(dev,pos) \
+	if (pos>=dev->atr_len || pos>=MAX_ATR) \
+		goto return_0;
+
+static unsigned int calc_baudv(unsigned char fidi)
+{
+	unsigned int wcrcf, wbrcf, fi_rfu, di_rfu;
+
+	fi_rfu = 372;
+	di_rfu = 1;
+
+	/* FI */
+	switch ((fidi >> 4) & 0x0F) {
+	case 0x00:
+		wcrcf = 372;
+		break;
+	case 0x01:
+		wcrcf = 372;
+		break;
+	case 0x02:
+		wcrcf = 558;
+		break;
+	case 0x03:
+		wcrcf = 744;
+		break;
+	case 0x04:
+		wcrcf = 1116;
+		break;
+	case 0x05:
+		wcrcf = 1488;
+		break;
+	case 0x06:
+		wcrcf = 1860;
+		break;
+	case 0x07:
+		wcrcf = fi_rfu;
+		break;
+	case 0x08:
+		wcrcf = fi_rfu;
+		break;
+	case 0x09:
+		wcrcf = 512;
+		break;
+	case 0x0A:
+		wcrcf = 768;
+		break;
+	case 0x0B:
+		wcrcf = 1024;
+		break;
+	case 0x0C:
+		wcrcf = 1536;
+		break;
+	case 0x0D:
+		wcrcf = 2048;
+		break;
+	default:
+		wcrcf = fi_rfu;
+		break;
+	}
+
+	/* DI */
+	switch (fidi & 0x0F) {
+	case 0x00:
+		wbrcf = di_rfu;
+		break;
+	case 0x01:
+		wbrcf = 1;
+		break;
+	case 0x02:
+		wbrcf = 2;
+		break;
+	case 0x03:
+		wbrcf = 4;
+		break;
+	case 0x04:
+		wbrcf = 8;
+		break;
+	case 0x05:
+		wbrcf = 16;
+		break;
+	case 0x06:
+		wbrcf = 32;
+		break;
+	case 0x07:
+		wbrcf = di_rfu;
+		break;
+	case 0x08:
+		wbrcf = 12;
+		break;
+	case 0x09:
+		wbrcf = 20;
+		break;
+	default:
+		wbrcf = di_rfu;
+		break;
+	}
+
+	return (wcrcf / wbrcf);
+}
+
+static unsigned short io_read_num_rec_bytes(ioaddr_t iobase, unsigned short *s)
+{
+	unsigned short tmp;
+
+	tmp = *s = 0;
+	do {
+		*s = tmp;
+		tmp = inb(REG_NUM_BYTES(iobase)) |
+				(inb(REG_FLAGS0(iobase)) & 4 ? 0x100 : 0);
+	} while (tmp != *s);
+
+	return *s;
+}
+
+static int parse_atr(struct cm4000_dev *dev)
+{
+	unsigned char any_t1, any_t0;
+	unsigned char ch, ifno;
+	int ix, done;
+
+	DEBUGP(3, dev, "-> parse_atr: dev->atr_len = %i\n", dev->atr_len);
+
+	if (dev->atr_len < 3) {
+		DEBUGP(5, dev, "parse_atr: atr_len < 3\n");
+		return 0;
+	}
+
+	if (dev->atr[0] == 0x3f)
+		set_bit(IS_INVREV, &dev->flags);
+	else
+		clear_bit(IS_INVREV, &dev->flags);
+	ix = 1;
+	ifno = 1;
+	ch = dev->atr[1];
+	dev->proto = 0;		/* XXX PROTO */
+	any_t1 = any_t0 = done = 0;
+	dev->ta1 = 0x11;	/* defaults to 9600 baud */
+	do {
+		if (ifno == 1 && (ch & 0x10)) {
+			/* read first interface byte and TA1 is present */
+			dev->ta1 = dev->atr[2];
+			DEBUGP(5, dev, "Card says FiDi is 0x%.2x\n", dev->ta1);
+			ifno++;
+		} else if ((ifno == 2) && (ch & 0x10)) { /* TA(2) */
+			dev->ta1 = 0x11;
+			ifno++;
+		}
+
+		DEBUGP(5, dev, "Yi=%.2x\n", ch & 0xf0);
+		ix += ((ch & 0x10) >> 4)	/* no of int.face chars */
+		    +((ch & 0x20) >> 5)
+		    + ((ch & 0x40) >> 6)
+		    + ((ch & 0x80) >> 7);
+		/* ATRLENCK(dev,ix); */
+		if (ch & 0x80) {	/* TDi */
+			ch = dev->atr[ix];
+			if ((ch & 0x0f)) {
+				any_t1 = 1;
+				DEBUGP(5, dev, "card is capable of T=1\n");
+			} else {
+				any_t0 = 1;
+				DEBUGP(5, dev, "card is capable of T=0\n");
+			}
+		} else
+			done = 1;
+	} while (!done);
+
+	DEBUGP(5, dev, "ix=%d noHist=%d any_t1=%d\n",
+	      ix, dev->atr[1] & 15, any_t1);
+	if (ix + 1 + (dev->atr[1] & 0x0f) + any_t1 != dev->atr_len) {
+		DEBUGP(5, dev, "length error\n");
+		return 0;
+	}
+	if (any_t0)
+		set_bit(IS_ANY_T0, &dev->flags);
+
+	if (any_t1) {		/* compute csum */
+		dev->atr_csum = 0;
+#ifdef ATR_CSUM
+		for (i = 1; i < dev->atr_len; i++)
+			dev->atr_csum ^= dev->atr[i];
+		if (dev->atr_csum) {
+			set_bit(IS_BAD_CSUM, &dev->flags);
+			DEBUGP(5, dev, "bad checksum\n");
+			goto return_0;
+		}
+#endif
+		if (any_t0 == 0)
+			dev->proto = 1;	/* XXX PROTO */
+		set_bit(IS_ANY_T1, &dev->flags);
+	}
+
+	return 1;
+}
+
+struct card_fixup {
+	char atr[12];
+	u_int8_t atr_len;
+	u_int8_t stopbits;
+};
+
+static struct card_fixup card_fixups[] = {
+	{	/* ACOS */
+		.atr = { 0x3b, 0xb3, 0x11, 0x00, 0x00, 0x41, 0x01 },
+		.atr_len = 7,
+		.stopbits = 0x03,
+	},
+	{	/* Motorola */
+		.atr = {0x3b, 0x76, 0x13, 0x00, 0x00, 0x80, 0x62, 0x07,
+			0x41, 0x81, 0x81 },
+		.atr_len = 11,
+		.stopbits = 0x04,
+	},
+};
+
+static void set_cardparameter(struct cm4000_dev *dev)
+{
+	int i;
+	ioaddr_t iobase = dev->link.io.BasePort1;
+	u_int8_t stopbits = 0x02; /* ISO default */
+
+	DEBUGP(3, dev, "-> set_cardparameter\n");
+
+	dev->flags1 = dev->flags1 | (((dev->baudv - 1) & 0x0100) >> 8);
+	xoutb(dev->flags1, REG_FLAGS1(iobase));
+	DEBUGP(5, dev, "flags1 = 0x%02x\n", dev->flags1);
+
+	/* set baudrate */
+	xoutb((unsigned char)((dev->baudv - 1) & 0xFF), REG_BAUDRATE(iobase));
+
+	DEBUGP(5, dev, "baudv = %i -> write 0x%02x\n", dev->baudv,
+	      ((dev->baudv - 1) & 0xFF));
+
+	/* set stopbits */
+	for (i = 0; i < ARRAY_SIZE(card_fixups); i++) {
+		if (!memcmp(dev->atr, card_fixups[i].atr,
+			    card_fixups[i].atr_len))
+			stopbits = card_fixups[i].stopbits;
+	}
+	xoutb(stopbits, REG_STOPBITS(iobase));
+
+	DEBUGP(3, dev, "<- set_cardparameter\n");
+}
+
+static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
+{
+
+	unsigned long tmp, i;
+	unsigned short num_bytes_read;
+	unsigned char pts_reply[4];
+	ssize_t rc;
+	ioaddr_t iobase = dev->link.io.BasePort1;
+
+	rc = 0;
+
+	DEBUGP(3, dev, "-> set_protocol\n");
+	DEBUGP(5, dev, "ptsreq->Protocol = 0x%.8x, ptsreq->Flags=0x%.8x, "
+		 "ptsreq->pts1=0x%.2x, ptsreq->pts2=0x%.2x, "
+		 "ptsreq->pts3=0x%.2x\n", (unsigned int)ptsreq->protocol,
+		 (unsigned int)ptsreq->flags, ptsreq->pts1, ptsreq->pts2,
+		 ptsreq->pts3);
+
+	/* Fill PTS structure */
+	dev->pts[0] = 0xff;
+	dev->pts[1] = 0x00;
+	tmp = ptsreq->protocol;
+	while ((tmp = (tmp >> 1)) > 0)
+		dev->pts[1]++;
+	dev->proto = dev->pts[1];	/* Set new protocol */
+	dev->pts[1] = (0x01 << 4) | (dev->pts[1]);
+
+	/* Correct Fi/Di according to CM4000 Fi/Di table */
+	DEBUGP(5, dev, "Ta(1) from ATR is 0x%.2x\n", dev->ta1);
+	/* set Fi/Di according to ATR TA(1) */
+	dev->pts[2] = fi_di_table[dev->ta1 & 0x0F][(dev->ta1 >> 4) & 0x0F];
+
+	/* Calculate PCK character */
+	dev->pts[3] = dev->pts[0] ^ dev->pts[1] ^ dev->pts[2];
+
+	DEBUGP(5, dev, "pts0=%.2x, pts1=%.2x, pts2=%.2x, pts3=%.2x\n",
+	       dev->pts[0], dev->pts[1], dev->pts[2], dev->pts[3]);
+
+	/* check card convention */
+	if (test_bit(IS_INVREV, &dev->flags))
+		str_invert_revert(dev->pts, 4);
+
+	/* reset SM */
+	xoutb(0x80, REG_FLAGS0(iobase));
+
+	/* Enable access to the message buffer */
+	DEBUGP(5, dev, "Enable access to the messages buffer\n");
+	dev->flags1 = 0x20	/* T_Active */
+	    | (test_bit(IS_INVREV, &dev->flags) ? 0x02 : 0x00) /* inv parity */
+	    | ((dev->baudv >> 8) & 0x01);	/* MSB-baud */
+	xoutb(dev->flags1, REG_FLAGS1(iobase));
+
+	DEBUGP(5, dev, "Enable message buffer -> flags1 = 0x%.2x\n",
+	       dev->flags1);
+
+	/* write challenge to the buffer */
+	DEBUGP(5, dev, "Write challenge to buffer: ");
+	for (i = 0; i < 4; i++) {
+		xoutb(i, REG_BUF_ADDR(iobase));
+		xoutb(dev->pts[i], REG_BUF_DATA(iobase));	/* buf data */
+#ifdef PCMCIA_DEBUG
+		if (pc_debug >= 5)
+			printk("0x%.2x ", dev->pts[i]);
+	}
+	if (pc_debug >= 5)
+		printk("\n");
+#else
+	}
+#endif
+
+	/* set number of bytes to write */
+	DEBUGP(5, dev, "Set number of bytes to write\n");
+	xoutb(0x04, REG_NUM_SEND(iobase));
+
+	/* Trigger CARDMAN CONTROLLER */
+	xoutb(0x50, REG_FLAGS0(iobase));
+
+	/* Monitor progress */
+	/* wait for xmit done */
+	DEBUGP(5, dev, "Waiting for NumRecBytes getting valid\n");
+
+	for (i = 0; i < 100; i++) {
+		if (inb(REG_FLAGS0(iobase)) & 0x08) {
+			DEBUGP(5, dev, "NumRecBytes is valid\n");
+			break;
+		}
+		mdelay(10);
+	}
+	if (i == 100) {
+		DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting "
+		       "valid\n");
+		rc = -EIO;
+		goto exit_setprotocol;
+	}
+
+	DEBUGP(5, dev, "Reading NumRecBytes\n");
+	for (i = 0; i < 100; i++) {
+		io_read_num_rec_bytes(iobase, &num_bytes_read);
+		if (num_bytes_read >= 4) {
+			DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read);
+			break;
+		}
+		mdelay(10);
+	}
+
+	/* check whether it is a short PTS reply? */
+	if (num_bytes_read == 3)
+		i = 0;
+
+	if (i == 100) {
+		DEBUGP(5, dev, "Timeout reading num_bytes_read\n");
+		rc = -EIO;
+		goto exit_setprotocol;
+	}
+
+	DEBUGP(5, dev, "Reset the CARDMAN CONTROLLER\n");
+	xoutb(0x80, REG_FLAGS0(iobase));
+
+	/* Read PPS reply */
+	DEBUGP(5, dev, "Read PPS reply\n");
+	for (i = 0; i < num_bytes_read; i++) {
+		xoutb(i, REG_BUF_ADDR(iobase));
+		pts_reply[i] = inb(REG_BUF_DATA(iobase));
+	}
+
+#ifdef PCMCIA_DEBUG
+	DEBUGP(2, dev, "PTSreply: ");
+	for (i = 0; i < num_bytes_read; i++) {
+		if (pc_debug >= 5)
+			printk("0x%.2x ", pts_reply[i]);
+	}
+	printk("\n");
+#endif	/* PCMCIA_DEBUG */
+
+	DEBUGP(5, dev, "Clear Tactive in Flags1\n");
+	xoutb(0x20, REG_FLAGS1(iobase));
+
+	/* Compare ptsreq and ptsreply */
+	if ((dev->pts[0] == pts_reply[0]) &&
+	    (dev->pts[1] == pts_reply[1]) &&
+	    (dev->pts[2] == pts_reply[2]) && (dev->pts[3] == pts_reply[3])) {
+		/* setcardparameter according to PPS */
+		dev->baudv = calc_baudv(dev->pts[2]);
+		set_cardparameter(dev);
+	} else if ((dev->pts[0] == pts_reply[0]) &&
+		   ((dev->pts[1] & 0xef) == pts_reply[1]) &&
+		   ((pts_reply[0] ^ pts_reply[1]) == pts_reply[2])) {
+		/* short PTS reply, set card parameter to default values */
+		dev->baudv = calc_baudv(0x11);
+		set_cardparameter(dev);
+	} else
+		rc = -EIO;
+
+exit_setprotocol:
+	DEBUGP(3, dev, "<- set_protocol\n");
+	return rc;
+}
+
+static int io_detect_cm4000(ioaddr_t iobase, struct cm4000_dev *dev)
+{
+
+	/* note: statemachine is assumed to be reset */
+	if (inb(REG_FLAGS0(iobase)) & 8) {
+		clear_bit(IS_ATR_VALID, &dev->flags);
+		set_bit(IS_CMM_ABSENT, &dev->flags);
+		return 0;	/* detect CMM = 1 -> failure */
+	}
+	/* xoutb(0x40, REG_FLAGS1(iobase)); detectCMM */
+	xoutb(dev->flags1 | 0x40, REG_FLAGS1(iobase));
+	if ((inb(REG_FLAGS0(iobase)) & 8) == 0) {
+		clear_bit(IS_ATR_VALID, &dev->flags);
+		set_bit(IS_CMM_ABSENT, &dev->flags);
+		return 0;	/* detect CMM=0 -> failure */
+	}
+	/* clear detectCMM again by restoring original flags1 */
+	xoutb(dev->flags1, REG_FLAGS1(iobase));
+	return 1;
+}
+
+static void terminate_monitor(struct cm4000_dev *dev)
+{
+
+	/* tell the monitor to stop and wait until
+	 * it terminates.
+	 */
+	DEBUGP(3, dev, "-> terminate_monitor\n");
+	wait_event_interruptible(dev->devq,
+				 test_and_set_bit(LOCK_MONITOR,
+						  (void *)&dev->flags));
+
+	/* now, LOCK_MONITOR has been set.
+	 * allow a last cycle in the monitor.
+	 * the monitor will indicate that it has
+	 * finished by clearing this bit.
+	 */
+	DEBUGP(5, dev, "Now allow last cycle of monitor!\n");
+	while (test_bit(LOCK_MONITOR, (void *)&dev->flags))
+		msleep(25);
+
+	DEBUGP(5, dev, "Delete timer\n");
+	del_timer_sync(&dev->timer);
+#ifdef PCMCIA_DEBUG
+	dev->monitor_running = 0;
+#endif
+
+	DEBUGP(3, dev, "<- terminate_monitor\n");
+}
+
+/*
+ * monitor the card every 50msec. as a side-effect, retrieve the
+ * atr once a card is inserted. another side-effect of retrieving the
+ * atr is that the card will be powered on, so there is no need to
+ * power on the card explictely from the application: the driver
+ * is already doing that for you.
+ */
+
+static void monitor_card(unsigned long p)
+{
+	struct cm4000_dev *dev = (struct cm4000_dev *) p;
+	ioaddr_t iobase = dev->link.io.BasePort1;
+	unsigned short s;
+	struct ptsreq ptsreq;
+	int i, atrc;
+
+	DEBUGP(7, dev, "->  monitor_card\n");
+
+	/* if someone has set the lock for us: we're done! */
+	if (test_and_set_bit(LOCK_MONITOR, &dev->flags)) {
+		DEBUGP(4, dev, "About to stop monitor\n");
+		/* no */
+		dev->rlen =
+		    dev->rpos =
+		    dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0;
+		dev->mstate = M_FETCH_ATR;
+		clear_bit(LOCK_MONITOR, &dev->flags);
+		/* close et al. are sleeping on devq, so wake it */
+		wake_up_interruptible(&dev->devq);
+		DEBUGP(2, dev, "<- monitor_card (we are done now)\n");
+		return;
+	}
+
+	/* try to lock io: if it is already locked, just add another timer */
+	if (test_and_set_bit(LOCK_IO, (void *)&dev->flags)) {
+		DEBUGP(4, dev, "Couldn't get IO lock\n");
+		goto return_with_timer;
+	}
+
+	/* is a card/a reader inserted at all ? */
+	dev->flags0 = xinb(REG_FLAGS0(iobase));
+	DEBUGP(7, dev, "dev->flags0 = 0x%2x\n", dev->flags0);
+	DEBUGP(7, dev, "smartcard present: %s\n",
+	       dev->flags0 & 1 ? "yes" : "no");
+	DEBUGP(7, dev, "cardman present: %s\n",
+	       dev->flags0 == 0xff ? "no" : "yes");
+
+	if ((dev->flags0 & 1) == 0	/* no smartcard inserted */
+	    || dev->flags0 == 0xff) {	/* no cardman inserted */
+		/* no */
+		dev->rlen =
+		    dev->rpos =
+		    dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0;
+		dev->mstate = M_FETCH_ATR;
+
+		dev->flags &= 0x000000ff; /* only keep IO and MONITOR locks */
+
+		if (dev->flags0 == 0xff) {
+			DEBUGP(4, dev, "set IS_CMM_ABSENT bit\n");
+			set_bit(IS_CMM_ABSENT, &dev->flags);
+		} else if (test_bit(IS_CMM_ABSENT, &dev->flags)) {
+			DEBUGP(4, dev, "clear IS_CMM_ABSENT bit "
+			       "(card is removed)\n");
+			clear_bit(IS_CMM_ABSENT, &dev->flags);
+		}
+
+		goto release_io;
+	} else if ((dev->flags0 & 1) && test_bit(IS_CMM_ABSENT, &dev->flags)) {
+		/* cardman and card present but cardman was absent before
+		 * (after suspend with inserted card) */
+		DEBUGP(4, dev, "clear IS_CMM_ABSENT bit (card is inserted)\n");
+		clear_bit(IS_CMM_ABSENT, &dev->flags);
+	}
+
+	if (test_bit(IS_ATR_VALID, &dev->flags) == 1) {
+		DEBUGP(7, dev, "believe ATR is already valid (do nothing)\n");
+		goto release_io;
+	}
+
+	switch (dev->mstate) {
+		unsigned char flags0;
+	case M_CARDOFF:
+		DEBUGP(4, dev, "M_CARDOFF\n");
+		flags0 = inb(REG_FLAGS0(iobase));
+		if (flags0 & 0x02) {
+			/* wait until Flags0 indicate power is off */
+			dev->mdelay = T_10MSEC;
+		} else {
+			/* Flags0 indicate power off and no card inserted now;
+			 * Reset CARDMAN CONTROLLER */
+			xoutb(0x80, REG_FLAGS0(iobase));
+
+			/* prepare for fetching ATR again: after card off ATR
+			 * is read again automatically */
+			dev->rlen =
+			    dev->rpos =
+			    dev->atr_csum =
+			    dev->atr_len_retry = dev->cwarn = 0;
+			dev->mstate = M_FETCH_ATR;
+
+			/* minimal gap between CARDOFF and read ATR is 50msec */
+			dev->mdelay = T_50MSEC;
+		}
+		break;
+	case M_FETCH_ATR:
+		DEBUGP(4, dev, "M_FETCH_ATR\n");
+		xoutb(0x80, REG_FLAGS0(iobase));
+		DEBUGP(4, dev, "Reset BAUDV to 9600\n");
+		dev->baudv = 0x173;	/* 9600 */
+		xoutb(0x02, REG_STOPBITS(iobase));	/* stopbits=2 */
+		xoutb(0x73, REG_BAUDRATE(iobase));	/* baud value */
+		xoutb(0x21, REG_FLAGS1(iobase));	/* T_Active=1, baud
+							   value */
+		/* warm start vs. power on: */
+		xoutb(dev->flags0 & 2 ? 0x46 : 0x44, REG_FLAGS0(iobase));
+		dev->mdelay = T_40MSEC;
+		dev->mstate = M_TIMEOUT_WAIT;
+		break;
+	case M_TIMEOUT_WAIT:
+		DEBUGP(4, dev, "M_TIMEOUT_WAIT\n");
+		/* numRecBytes */
+		io_read_num_rec_bytes(iobase, &dev->atr_len);
+		dev->mdelay = T_10MSEC;
+		dev->mstate = M_READ_ATR_LEN;
+		break;
+	case M_READ_ATR_LEN:
+		DEBUGP(4, dev, "M_READ_ATR_LEN\n");
+		/* infinite loop possible, since there is no timeout */
+
+#define	MAX_ATR_LEN_RETRY	100
+
+		if (dev->atr_len == io_read_num_rec_bytes(iobase, &s)) {
+			if (dev->atr_len_retry++ >= MAX_ATR_LEN_RETRY) {					/* + XX msec */
+				dev->mdelay = T_10MSEC;
+				dev->mstate = M_READ_ATR;
+			}
+		} else {
+			dev->atr_len = s;
+			dev->atr_len_retry = 0;	/* set new timeout */
+		}
+
+		DEBUGP(4, dev, "Current ATR_LEN = %i\n", dev->atr_len);
+		break;
+	case M_READ_ATR:
+		DEBUGP(4, dev, "M_READ_ATR\n");
+		xoutb(0x80, REG_FLAGS0(iobase));	/* reset SM */
+		for (i = 0; i < dev->atr_len; i++) {
+			xoutb(i, REG_BUF_ADDR(iobase));
+			dev->atr[i] = inb(REG_BUF_DATA(iobase));
+		}
+		/* Deactivate T_Active flags */
+		DEBUGP(4, dev, "Deactivate T_Active flags\n");
+		dev->flags1 = 0x01;
+		xoutb(dev->flags1, REG_FLAGS1(iobase));
+
+		/* atr is present (which doesnt mean it's valid) */
+		set_bit(IS_ATR_PRESENT, &dev->flags);
+		if (dev->atr[0] == 0x03)
+			str_invert_revert(dev->atr, dev->atr_len);
+		atrc = parse_atr(dev);
+		if (atrc == 0) {	/* atr invalid */
+			dev->mdelay = 0;
+			dev->mstate = M_BAD_CARD;
+		} else {
+			dev->mdelay = T_50MSEC;
+			dev->mstate = M_ATR_PRESENT;
+			set_bit(IS_ATR_VALID, &dev->flags);
+		}
+
+		if (test_bit(IS_ATR_VALID, &dev->flags) == 1) {
+			DEBUGP(4, dev, "monitor_card: ATR valid\n");
+ 			/* if ta1 == 0x11, no PPS necessary (default values) */
+			/* do not do PPS with multi protocol cards */
+			if ((test_bit(IS_AUTOPPS_ACT, &dev->flags) == 0) &&
+			    (dev->ta1 != 0x11) &&
+			    !(test_bit(IS_ANY_T0, &dev->flags) &&
+			    test_bit(IS_ANY_T1, &dev->flags))) {
+				DEBUGP(4, dev, "Perform AUTOPPS\n");
+				set_bit(IS_AUTOPPS_ACT, &dev->flags);
+				ptsreq.protocol = ptsreq.protocol =
+				    (0x01 << dev->proto);
+				ptsreq.flags = 0x01;
+				ptsreq.pts1 = 0x00;
+				ptsreq.pts2 = 0x00;
+				ptsreq.pts3 = 0x00;
+				if (set_protocol(dev, &ptsreq) == 0) {
+					DEBUGP(4, dev, "AUTOPPS ret SUCC\n");
+					clear_bit(IS_AUTOPPS_ACT, &dev->flags);
+					wake_up_interruptible(&dev->atrq);
+				} else {
+					DEBUGP(4, dev, "AUTOPPS failed: "
+					       "repower using defaults\n");
+					/* prepare for repowering  */
+					clear_bit(IS_ATR_PRESENT, &dev->flags);
+					clear_bit(IS_ATR_VALID, &dev->flags);
+					dev->rlen =
+					    dev->rpos =
+					    dev->atr_csum =
+					    dev->atr_len_retry = dev->cwarn = 0;
+					dev->mstate = M_FETCH_ATR;
+
+					dev->mdelay = T_50MSEC;
+				}
+			} else {
+				/* for cards which use slightly different
+				 * params (extra guard time) */
+				set_cardparameter(dev);
+				if (test_bit(IS_AUTOPPS_ACT, &dev->flags) == 1)
+					DEBUGP(4, dev, "AUTOPPS already active "
+					       "2nd try:use default values\n");
+				if (dev->ta1 == 0x11)
+					DEBUGP(4, dev, "No AUTOPPS necessary "
+					       "TA(1)==0x11\n");
+				if (test_bit(IS_ANY_T0, &dev->flags)
+				    && test_bit(IS_ANY_T1, &dev->flags))
+					DEBUGP(4, dev, "Do NOT perform AUTOPPS "
+					       "with multiprotocol cards\n");
+				clear_bit(IS_AUTOPPS_ACT, &dev->flags);
+				wake_up_interruptible(&dev->atrq);
+			}
+		} else {
+			DEBUGP(4, dev, "ATR invalid\n");
+			wake_up_interruptible(&dev->atrq);
+		}
+		break;
+	case M_BAD_CARD:
+		DEBUGP(4, dev, "M_BAD_CARD\n");
+		/* slow down warning, but prompt immediately after insertion */
+		if (dev->cwarn == 0 || dev->cwarn == 10) {
+			set_bit(IS_BAD_CARD, &dev->flags);
+			printk(KERN_WARNING MODULE_NAME ": device %s: ",
+			       dev->node.dev_name);
+			if (test_bit(IS_BAD_CSUM, &dev->flags)) {
+				DEBUGP(4, dev, "ATR checksum (0x%.2x, should "
+				       "be zero) failed\n", dev->atr_csum);
+			}
+#ifdef PCMCIA_DEBUG
+			else if (test_bit(IS_BAD_LENGTH, &dev->flags)) {
+				DEBUGP(4, dev, "ATR length error\n");
+			} else {
+				DEBUGP(4, dev, "card damaged or wrong way "
+					"inserted\n");
+			}
+#endif
+			dev->cwarn = 0;
+			wake_up_interruptible(&dev->atrq);	/* wake open */
+		}
+		dev->cwarn++;
+		dev->mdelay = T_100MSEC;
+		dev->mstate = M_FETCH_ATR;
+		break;
+	default:
+		DEBUGP(7, dev, "Unknown action\n");
+		break;		/* nothing */
+	}
+
+release_io:
+	DEBUGP(7, dev, "release_io\n");
+	clear_bit(LOCK_IO, &dev->flags);
+	wake_up_interruptible(&dev->ioq);	/* whoever needs IO */
+
+return_with_timer:
+	DEBUGP(7, dev, "<- monitor_card (returns with timer)\n");
+	dev->timer.expires = jiffies + dev->mdelay;
+	add_timer(&dev->timer);
+	clear_bit(LOCK_MONITOR, &dev->flags);
+}
+
+/* Interface to userland (file_operations) */
+
+static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count,
+			loff_t *ppos)
+{
+	struct cm4000_dev *dev = filp->private_data;
+	ioaddr_t iobase = dev->link.io.BasePort1;
+	ssize_t rc;
+	int i, j, k;
+
+	DEBUGP(2, dev, "-> cmm_read(%s,%d)\n", current->comm, current->pid);
+
+	if (count == 0)		/* according to manpage */
+		return 0;
+
+	if ((dev->link.state & DEV_PRESENT) == 0 ||	/* socket removed */
+	    test_bit(IS_CMM_ABSENT, &dev->flags))
+		return -ENODEV;
+
+	if (test_bit(IS_BAD_CSUM, &dev->flags))
+		return -EIO;
+
+	/* also see the note about this in cmm_write */
+	if (wait_event_interruptible
+	    (dev->atrq,
+	     ((filp->f_flags & O_NONBLOCK)
+	      || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) {
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		return -ERESTARTSYS;
+	}
+
+	if (test_bit(IS_ATR_VALID, &dev->flags) == 0)
+		return -EIO;
+
+	/* this one implements blocking IO */
+	if (wait_event_interruptible
+	    (dev->readq,
+	     ((filp->f_flags & O_NONBLOCK) || (dev->rpos < dev->rlen)))) {
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		return -ERESTARTSYS;
+	}
+
+	/* lock io */
+	if (wait_event_interruptible
+	    (dev->ioq,
+	     ((filp->f_flags & O_NONBLOCK)
+	      || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) {
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		return -ERESTARTSYS;
+	}
+
+	rc = 0;
+	dev->flags0 = inb(REG_FLAGS0(iobase));
+	if ((dev->flags0 & 1) == 0	/* no smartcard inserted */
+	    || dev->flags0 == 0xff) {	/* no cardman inserted */
+		clear_bit(IS_ATR_VALID, &dev->flags);
+		if (dev->flags0 & 1) {
+			set_bit(IS_CMM_ABSENT, &dev->flags);
+			rc = -ENODEV;
+		}
+		rc = -EIO;
+		goto release_io;
+	}
+
+	DEBUGP(4, dev, "begin read answer\n");
+	j = min(count, (size_t)(dev->rlen - dev->rpos));
+	k = dev->rpos;
+	if (k + j > 255)
+		j = 256 - k;
+	DEBUGP(4, dev, "read1 j=%d\n", j);
+	for (i = 0; i < j; i++) {
+		xoutb(k++, REG_BUF_ADDR(iobase));
+		dev->rbuf[i] = xinb(REG_BUF_DATA(iobase));
+	}
+	j = min(count, (size_t)(dev->rlen - dev->rpos));
+	if (k + j > 255) {
+		DEBUGP(4, dev, "read2 j=%d\n", j);
+		dev->flags1 |= 0x10;	/* MSB buf addr set */
+		xoutb(dev->flags1, REG_FLAGS1(iobase));
+		for (; i < j; i++) {
+			xoutb(k++, REG_BUF_ADDR(iobase));
+			dev->rbuf[i] = xinb(REG_BUF_DATA(iobase));
+		}
+	}
+
+	if (dev->proto == 0 && count > dev->rlen - dev->rpos) {
+		DEBUGP(4, dev, "T=0 and count > buffer\n");
+		dev->rbuf[i] = dev->rbuf[i - 1];
+		dev->rbuf[i - 1] = dev->procbyte;
+		j++;
+	}
+	count = j;
+
+	dev->rpos = dev->rlen + 1;
+
+	/* Clear T1Active */
+	DEBUGP(4, dev, "Clear T1Active\n");
+	dev->flags1 &= 0xdf;
+	xoutb(dev->flags1, REG_FLAGS1(iobase));
+
+	xoutb(0, REG_FLAGS1(iobase));	/* clear detectCMM */
+	/* last check before exit */
+	if (!io_detect_cm4000(iobase, dev))
+		count = -ENODEV;
+
+	if (test_bit(IS_INVREV, &dev->flags) && count > 0)
+		str_invert_revert(dev->rbuf, count);
+
+	if (copy_to_user(buf, dev->rbuf, count))
+		return -EFAULT;
+
+release_io:
+	clear_bit(LOCK_IO, &dev->flags);
+	wake_up_interruptible(&dev->ioq);
+
+	DEBUGP(2, dev, "<- cmm_read returns: rc = %Zi\n",
+	       (rc < 0 ? rc : count));
+	return rc < 0 ? rc : count;
+}
+
+static ssize_t cmm_write(struct file *filp, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	struct cm4000_dev *dev = (struct cm4000_dev *) filp->private_data;
+	ioaddr_t iobase = dev->link.io.BasePort1;
+	unsigned short s;
+	unsigned char tmp;
+	unsigned char infolen;
+	unsigned char sendT0;
+	unsigned short nsend;
+	unsigned short nr;
+	ssize_t rc;
+	int i;
+
+	DEBUGP(2, dev, "-> cmm_write(%s,%d)\n", current->comm, current->pid);
+
+	if (count == 0)		/* according to manpage */
+		return 0;
+
+	if (dev->proto == 0 && count < 4) {
+		/* T0 must have at least 4 bytes */
+		DEBUGP(4, dev, "T0 short write\n");
+		return -EIO;
+	}
+
+	nr = count & 0x1ff;	/* max bytes to write */
+
+	sendT0 = dev->proto ? 0 : nr > 5 ? 0x08 : 0;
+
+	if ((dev->link.state & DEV_PRESENT) == 0 ||	/* socket removed */
+	    test_bit(IS_CMM_ABSENT, &dev->flags))
+		return -ENODEV;
+
+	if (test_bit(IS_BAD_CSUM, &dev->flags)) {
+		DEBUGP(4, dev, "bad csum\n");
+		return -EIO;
+	}
+
+	/*
+	 * wait for atr to become valid.
+	 * note: it is important to lock this code. if we dont, the monitor
+	 * could be run between test_bit and the the call the sleep on the
+	 * atr-queue.  if *then* the monitor detects atr valid, it will wake up
+	 * any process on the atr-queue, *but* since we have been interrupted,
+	 * we do not yet sleep on this queue. this would result in a missed
+	 * wake_up and the calling process would sleep forever (until
+	 * interrupted).  also, do *not* restore_flags before sleep_on, because
+	 * this could result in the same situation!
+	 */
+	if (wait_event_interruptible
+	    (dev->atrq,
+	     ((filp->f_flags & O_NONBLOCK)
+	      || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) {
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		return -ERESTARTSYS;
+	}
+
+	if (test_bit(IS_ATR_VALID, &dev->flags) == 0) {	/* invalid atr */
+		DEBUGP(4, dev, "invalid ATR\n");
+		return -EIO;
+	}
+
+	/* lock io */
+	if (wait_event_interruptible
+	    (dev->ioq,
+	     ((filp->f_flags & O_NONBLOCK)
+	      || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) {
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		return -ERESTARTSYS;
+	}
+
+	if (copy_from_user(dev->sbuf, buf, ((count > 512) ? 512 : count)))
+		return -EFAULT;
+
+	rc = 0;
+	dev->flags0 = inb(REG_FLAGS0(iobase));
+	if ((dev->flags0 & 1) == 0	/* no smartcard inserted */
+	    || dev->flags0 == 0xff) {	/* no cardman inserted */
+		clear_bit(IS_ATR_VALID, &dev->flags);
+		if (dev->flags0 & 1) {
+			set_bit(IS_CMM_ABSENT, &dev->flags);
+			rc = -ENODEV;
+		} else {
+			DEBUGP(4, dev, "IO error\n");
+			rc = -EIO;
+		}
+		goto release_io;
+	}
+
+	xoutb(0x80, REG_FLAGS0(iobase));	/* reset SM  */
+
+	if (!io_detect_cm4000(iobase, dev)) {
+		rc = -ENODEV;
+		goto release_io;
+	}
+
+	/* reflect T=0 send/read mode in flags1 */
+	dev->flags1 |= (sendT0);
+
+	set_cardparameter(dev);
+
+	/* dummy read, reset flag procedure received */
+	tmp = inb(REG_FLAGS1(iobase));
+
+	dev->flags1 = 0x20	/* T_Active */
+	    | (sendT0)
+	    | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)/* inverse parity  */
+	    | (((dev->baudv - 1) & 0x0100) >> 8);	/* MSB-Baud */
+	DEBUGP(1, dev, "set dev->flags1 = 0x%.2x\n", dev->flags1);
+	xoutb(dev->flags1, REG_FLAGS1(iobase));
+
+	/* xmit data */
+	DEBUGP(4, dev, "Xmit data\n");
+	for (i = 0; i < nr; i++) {
+		if (i >= 256) {
+			dev->flags1 = 0x20	/* T_Active */
+			    | (sendT0)	/* SendT0 */
+				/* inverse parity: */
+			    | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)
+			    | (((dev->baudv - 1) & 0x0100) >> 8) /* MSB-Baud */
+			    | 0x10;	/* set address high */
+			DEBUGP(4, dev, "dev->flags = 0x%.2x - set address "
+			       "high\n", dev->flags1);
+			xoutb(dev->flags1, REG_FLAGS1(iobase));
+		}
+		if (test_bit(IS_INVREV, &dev->flags)) {
+			DEBUGP(4, dev, "Apply inverse convention for 0x%.2x "
+				"-> 0x%.2x\n", (unsigned char)dev->sbuf[i],
+			      invert_revert(dev->sbuf[i]));
+			xoutb(i, REG_BUF_ADDR(iobase));
+			xoutb(invert_revert(dev->sbuf[i]),
+			      REG_BUF_DATA(iobase));
+		} else {
+			xoutb(i, REG_BUF_ADDR(iobase));
+			xoutb(dev->sbuf[i], REG_BUF_DATA(iobase));
+		}
+	}
+	DEBUGP(4, dev, "Xmit done\n");
+
+	if (dev->proto == 0) {
+		/* T=0 proto: 0 byte reply  */
+		if (nr == 4) {
+			DEBUGP(4, dev, "T=0 assumes 0 byte reply\n");
+			xoutb(i, REG_BUF_ADDR(iobase));
+			if (test_bit(IS_INVREV, &dev->flags))
+				xoutb(0xff, REG_BUF_DATA(iobase));
+			else
+				xoutb(0x00, REG_BUF_DATA(iobase));
+		}
+
+		/* numSendBytes */
+		if (sendT0)
+			nsend = nr;
+		else {
+			if (nr == 4)
+				nsend = 5;
+			else {
+				nsend = 5 + (unsigned char)dev->sbuf[4];
+				if (dev->sbuf[4] == 0)
+					nsend += 0x100;
+			}
+		}
+	} else
+		nsend = nr;
+
+	/* T0: output procedure byte */
+	if (test_bit(IS_INVREV, &dev->flags)) {
+		DEBUGP(4, dev, "T=0 set Procedure byte (inverse-reverse) "
+		       "0x%.2x\n", invert_revert(dev->sbuf[1]));
+		xoutb(invert_revert(dev->sbuf[1]), REG_NUM_BYTES(iobase));
+	} else {
+		DEBUGP(4, dev, "T=0 set Procedure byte 0x%.2x\n", dev->sbuf[1]);
+		xoutb(dev->sbuf[1], REG_NUM_BYTES(iobase));
+	}
+
+	DEBUGP(1, dev, "set NumSendBytes = 0x%.2x\n",
+	       (unsigned char)(nsend & 0xff));
+	xoutb((unsigned char)(nsend & 0xff), REG_NUM_SEND(iobase));
+
+	DEBUGP(1, dev, "Trigger CARDMAN CONTROLLER (0x%.2x)\n",
+	       0x40	/* SM_Active */
+	      | (dev->flags0 & 2 ? 0 : 4)	/* power on if needed */
+	      |(dev->proto ? 0x10 : 0x08)	/* T=1/T=0 */
+	      |(nsend & 0x100) >> 8 /* MSB numSendBytes */ );
+	xoutb(0x40		/* SM_Active */
+	      | (dev->flags0 & 2 ? 0 : 4)	/* power on if needed */
+	      |(dev->proto ? 0x10 : 0x08)	/* T=1/T=0 */
+	      |(nsend & 0x100) >> 8,	/* MSB numSendBytes */
+	      REG_FLAGS0(iobase));
+
+	/* wait for xmit done */
+	if (dev->proto == 1) {
+		DEBUGP(4, dev, "Wait for xmit done\n");
+		for (i = 0; i < 1000; i++) {
+			if (inb(REG_FLAGS0(iobase)) & 0x08)
+				break;
+			msleep_interruptible(10);
+		}
+		if (i == 1000) {
+			DEBUGP(4, dev, "timeout waiting for xmit done\n");
+			rc = -EIO;
+			goto release_io;
+		}
+	}
+
+	/* T=1: wait for infoLen */
+
+	infolen = 0;
+	if (dev->proto) {
+		/* wait until infoLen is valid */
+		for (i = 0; i < 6000; i++) {	/* max waiting time of 1 min */
+			io_read_num_rec_bytes(iobase, &s);
+			if (s >= 3) {
+				infolen = inb(REG_FLAGS1(iobase));
+				DEBUGP(4, dev, "infolen=%d\n", infolen);
+				break;
+			}
+			msleep_interruptible(10);
+		}
+		if (i == 6000) {
+			DEBUGP(4, dev, "timeout waiting for infoLen\n");
+			rc = -EIO;
+			goto release_io;
+		}
+	} else
+		clear_bit(IS_PROCBYTE_PRESENT, &dev->flags);
+
+	/* numRecBytes | bit9 of numRecytes */
+	io_read_num_rec_bytes(iobase, &dev->rlen);
+	for (i = 0; i < 600; i++) {	/* max waiting time of 2 sec */
+		if (dev->proto) {
+			if (dev->rlen >= infolen + 4)
+				break;
+		}
+		msleep_interruptible(10);
+		/* numRecBytes | bit9 of numRecytes */
+		io_read_num_rec_bytes(iobase, &s);
+		if (s > dev->rlen) {
+			DEBUGP(1, dev, "NumRecBytes inc (reset timeout)\n");
+			i = 0;	/* reset timeout */
+			dev->rlen = s;
+		}
+		/* T=0: we are done when numRecBytes doesn't
+		 *      increment any more and NoProcedureByte
+		 *      is set and numRecBytes == bytes sent + 6
+		 *      (header bytes + data + 1 for sw2)
+		 *      except when the card replies an error
+		 *      which means, no data will be sent back.
+		 */
+		else if (dev->proto == 0) {
+			if ((inb(REG_BUF_ADDR(iobase)) & 0x80)) {
+				/* no procedure byte received since last read */
+				DEBUGP(1, dev, "NoProcedure byte set\n");
+				/* i=0; */
+			} else {
+				/* procedure byte received since last read */
+				DEBUGP(1, dev, "NoProcedure byte unset "
+					"(reset timeout)\n");
+				dev->procbyte = inb(REG_FLAGS1(iobase));
+				DEBUGP(1, dev, "Read procedure byte 0x%.2x\n",
+				      dev->procbyte);
+				i = 0;	/* resettimeout */
+			}
+			if (inb(REG_FLAGS0(iobase)) & 0x08) {
+				DEBUGP(1, dev, "T0Done flag (read reply)\n");
+				break;
+			}
+		}
+		if (dev->proto)
+			infolen = inb(REG_FLAGS1(iobase));
+	}
+	if (i == 600) {
+		DEBUGP(1, dev, "timeout waiting for numRecBytes\n");
+		rc = -EIO;
+		goto release_io;
+	} else {
+		if (dev->proto == 0) {
+			DEBUGP(1, dev, "Wait for T0Done bit to be  set\n");
+			for (i = 0; i < 1000; i++) {
+				if (inb(REG_FLAGS0(iobase)) & 0x08)
+					break;
+				msleep_interruptible(10);
+			}
+			if (i == 1000) {
+				DEBUGP(1, dev, "timeout waiting for T0Done\n");
+				rc = -EIO;
+				goto release_io;
+			}
+
+			dev->procbyte = inb(REG_FLAGS1(iobase));
+			DEBUGP(4, dev, "Read procedure byte 0x%.2x\n",
+			      dev->procbyte);
+
+			io_read_num_rec_bytes(iobase, &dev->rlen);
+			DEBUGP(4, dev, "Read NumRecBytes = %i\n", dev->rlen);
+
+		}
+	}
+	/* T=1: read offset=zero, T=0: read offset=after challenge */
+	dev->rpos = dev->proto ? 0 : nr == 4 ? 5 : nr > dev->rlen ? 5 : nr;
+	DEBUGP(4, dev, "dev->rlen = %i,  dev->rpos = %i, nr = %i\n",
+	      dev->rlen, dev->rpos, nr);
+
+release_io:
+	DEBUGP(4, dev, "Reset SM\n");
+	xoutb(0x80, REG_FLAGS0(iobase));	/* reset SM */
+
+	if (rc < 0) {
+		DEBUGP(4, dev, "Write failed but clear T_Active\n");
+		dev->flags1 &= 0xdf;
+		xoutb(dev->flags1, REG_FLAGS1(iobase));
+	}
+
+	clear_bit(LOCK_IO, &dev->flags);
+	wake_up_interruptible(&dev->ioq);
+	wake_up_interruptible(&dev->readq);	/* tell read we have data */
+
+	/* ITSEC E2: clear write buffer */
+	memset((char *)dev->sbuf, 0, 512);
+
+	/* return error or actually written bytes */
+	DEBUGP(2, dev, "<- cmm_write\n");
+	return rc < 0 ? rc : nr;
+}
+
+static void start_monitor(struct cm4000_dev *dev)
+{
+	DEBUGP(3, dev, "-> start_monitor\n");
+	if (!dev->monitor_running) {
+		DEBUGP(5, dev, "create, init and add timer\n");
+		init_timer(&dev->timer);
+		dev->monitor_running = 1;
+		dev->timer.expires = jiffies;
+		dev->timer.data = (unsigned long) dev;
+		dev->timer.function = monitor_card;
+		add_timer(&dev->timer);
+	} else
+		DEBUGP(5, dev, "monitor already running\n");
+	DEBUGP(3, dev, "<- start_monitor\n");
+}
+
+static void stop_monitor(struct cm4000_dev *dev)
+{
+	DEBUGP(3, dev, "-> stop_monitor\n");
+	if (dev->monitor_running) {
+		DEBUGP(5, dev, "stopping monitor\n");
+		terminate_monitor(dev);
+		/* reset monitor SM */
+		clear_bit(IS_ATR_VALID, &dev->flags);
+		clear_bit(IS_ATR_PRESENT, &dev->flags);
+	} else
+		DEBUGP(5, dev, "monitor already stopped\n");
+	DEBUGP(3, dev, "<- stop_monitor\n");
+}
+
+static int cmm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+		     unsigned long arg)
+{
+	struct cm4000_dev *dev = filp->private_data;
+	ioaddr_t iobase = dev->link.io.BasePort1;
+	dev_link_t *link;
+	int size;
+	int rc;
+#ifdef PCMCIA_DEBUG
+	char *ioctl_names[CM_IOC_MAXNR + 1] = {
+		[_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS",
+		[_IOC_NR(CM_IOCGATR)] "CM_IOCGATR",
+		[_IOC_NR(CM_IOCARDOFF)] "CM_IOCARDOFF",
+		[_IOC_NR(CM_IOCSPTS)] "CM_IOCSPTS",
+		[_IOC_NR(CM_IOSDBGLVL)] "CM4000_DBGLVL",
+	};
+#endif
+	DEBUGP(3, dev, "cmm_ioctl(device=%d.%d) %s\n", imajor(inode),
+	       iminor(inode), ioctl_names[_IOC_NR(cmd)]);
+
+	link = dev_table[iminor(inode)];
+	if (!(DEV_OK(link))) {
+		DEBUGP(4, dev, "DEV_OK false\n");
+		return -ENODEV;
+	}
+
+	if (test_bit(IS_CMM_ABSENT, &dev->flags)) {
+		DEBUGP(4, dev, "CMM_ABSENT flag set\n");
+		return -ENODEV;
+	}
+
+	if (_IOC_TYPE(cmd) != CM_IOC_MAGIC) {
+		DEBUGP(4, dev, "ioctype mismatch\n");
+		return -EINVAL;
+	}
+	if (_IOC_NR(cmd) > CM_IOC_MAXNR) {
+		DEBUGP(4, dev, "iocnr mismatch\n");
+		return -EINVAL;
+	}
+	size = _IOC_SIZE(cmd);
+	rc = 0;
+	DEBUGP(4, dev, "iocdir=%.4x iocr=%.4x iocw=%.4x iocsize=%d cmd=%.4x\n",
+	      _IOC_DIR(cmd), _IOC_READ, _IOC_WRITE, size, cmd);
+
+	if (_IOC_DIR(cmd) & _IOC_READ) {
+		if (!access_ok(VERIFY_WRITE, (void *)arg, size))
+			return -EFAULT;
+	}
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
+		if (!access_ok(VERIFY_READ, (void *)arg, size))
+			return -EFAULT;
+	}
+
+	switch (cmd) {
+	case CM_IOCGSTATUS:
+		DEBUGP(4, dev, " ... in CM_IOCGSTATUS\n");
+		{
+			int status;
+
+			/* clear other bits, but leave inserted & powered as
+			 * they are */
+			status = dev->flags0 & 3;
+			if (test_bit(IS_ATR_PRESENT, &dev->flags))
+				status |= CM_ATR_PRESENT;
+			if (test_bit(IS_ATR_VALID, &dev->flags))
+				status |= CM_ATR_VALID;
+			if (test_bit(IS_CMM_ABSENT, &dev->flags))
+				status |= CM_NO_READER;
+			if (test_bit(IS_BAD_CARD, &dev->flags))
+				status |= CM_BAD_CARD;
+			if (copy_to_user((int *)arg, &status, sizeof(int)))
+				return -EFAULT;
+		}
+		return 0;
+	case CM_IOCGATR:
+		DEBUGP(4, dev, "... in CM_IOCGATR\n");
+		{
+			struct atreq *atreq = (struct atreq *) arg;
+			int tmp;
+			/* allow nonblocking io and being interrupted */
+			if (wait_event_interruptible
+			    (dev->atrq,
+			     ((filp->f_flags & O_NONBLOCK)
+			      || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags)
+				  != 0)))) {
+				if (filp->f_flags & O_NONBLOCK)
+					return -EAGAIN;
+				return -ERESTARTSYS;
+			}
+
+			if (test_bit(IS_ATR_VALID, &dev->flags) == 0) {
+				tmp = -1;
+				if (copy_to_user(&(atreq->atr_len), &tmp,
+						 sizeof(int)))
+					return -EFAULT;
+			} else {
+				if (copy_to_user(atreq->atr, dev->atr,
+						 dev->atr_len))
+					return -EFAULT;
+
+				tmp = dev->atr_len;
+				if (copy_to_user(&(atreq->atr_len), &tmp, sizeof(int)))
+					return -EFAULT;
+			}
+			return 0;
+		}
+	case CM_IOCARDOFF:
+
+#ifdef PCMCIA_DEBUG
+		DEBUGP(4, dev, "... in CM_IOCARDOFF\n");
+		if (dev->flags0 & 0x01) {
+			DEBUGP(4, dev, "    Card inserted\n");
+		} else {
+			DEBUGP(2, dev, "    No card inserted\n");
+		}
+		if (dev->flags0 & 0x02) {
+			DEBUGP(4, dev, "    Card powered\n");
+		} else {
+			DEBUGP(2, dev, "    Card not powered\n");
+		}
+#endif
+
+		/* is a card inserted and powered? */
+		if ((dev->flags0 & 0x01) && (dev->flags0 & 0x02)) {
+
+			/* get IO lock */
+			if (wait_event_interruptible
+			    (dev->ioq,
+			     ((filp->f_flags & O_NONBLOCK)
+			      || (test_and_set_bit(LOCK_IO, (void *)&dev->flags)
+				  == 0)))) {
+				if (filp->f_flags & O_NONBLOCK)
+					return -EAGAIN;
+				return -ERESTARTSYS;
+			}
+			/* Set Flags0 = 0x42 */
+			DEBUGP(4, dev, "Set Flags0=0x42 \n");
+			xoutb(0x42, REG_FLAGS0(iobase));
+			clear_bit(IS_ATR_PRESENT, &dev->flags);
+			clear_bit(IS_ATR_VALID, &dev->flags);
+			dev->mstate = M_CARDOFF;
+			clear_bit(LOCK_IO, &dev->flags);
+			if (wait_event_interruptible
+			    (dev->atrq,
+			     ((filp->f_flags & O_NONBLOCK)
+			      || (test_bit(IS_ATR_VALID, (void *)&dev->flags) !=
+				  0)))) {
+				if (filp->f_flags & O_NONBLOCK)
+					return -EAGAIN;
+				return -ERESTARTSYS;
+			}
+		}
+		/* release lock */
+		clear_bit(LOCK_IO, &dev->flags);
+		wake_up_interruptible(&dev->ioq);
+
+		return 0;
+	case CM_IOCSPTS:
+		{
+			struct ptsreq krnptsreq;
+
+			if (copy_from_user(&krnptsreq, (struct ptsreq *) arg,
+					   sizeof(struct ptsreq)))
+				return -EFAULT;
+
+			rc = 0;
+			DEBUGP(4, dev, "... in CM_IOCSPTS\n");
+			/* wait for ATR to get valid */
+			if (wait_event_interruptible
+			    (dev->atrq,
+			     ((filp->f_flags & O_NONBLOCK)
+			      || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags)
+				  != 0)))) {
+				if (filp->f_flags & O_NONBLOCK)
+					return -EAGAIN;
+				return -ERESTARTSYS;
+			}
+			/* get IO lock */
+			if (wait_event_interruptible
+			    (dev->ioq,
+			     ((filp->f_flags & O_NONBLOCK)
+			      || (test_and_set_bit(LOCK_IO, (void *)&dev->flags)
+				  == 0)))) {
+				if (filp->f_flags & O_NONBLOCK)
+					return -EAGAIN;
+				return -ERESTARTSYS;
+			}
+
+			if ((rc = set_protocol(dev, &krnptsreq)) != 0) {
+				/* auto power_on again */
+				dev->mstate = M_FETCH_ATR;
+				clear_bit(IS_ATR_VALID, &dev->flags);
+			}
+			/* release lock */
+			clear_bit(LOCK_IO, &dev->flags);
+			wake_up_interruptible(&dev->ioq);
+
+		}
+		return rc;
+#ifdef PCMCIA_DEBUG
+	case CM_IOSDBGLVL:	/* set debug log level */
+		{
+			int old_pc_debug = 0;
+
+			old_pc_debug = pc_debug;
+			if (copy_from_user(&pc_debug, (int *)arg, sizeof(int)))
+				return -EFAULT;
+
+			if (old_pc_debug != pc_debug)
+				DEBUGP(0, dev, "Changed debug log level "
+				       "to %i\n", pc_debug);
+		}
+		return rc;
+#endif
+	default:
+		DEBUGP(4, dev, "... in default (unknown IOCTL code)\n");
+		return -EINVAL;
+	}
+}
+
+static int cmm_open(struct inode *inode, struct file *filp)
+{
+	struct cm4000_dev *dev;
+	dev_link_t *link;
+	int rc, minor = iminor(inode);
+
+	if (minor >= CM4000_MAX_DEV)
+		return -ENODEV;
+
+	link = dev_table[minor];
+	if (link == NULL || !(DEV_OK(link)))
+		return -ENODEV;
+
+	if (link->open)
+		return -EBUSY;
+
+	dev = link->priv;
+	filp->private_data = dev;
+
+	DEBUGP(2, dev, "-> cmm_open(device=%d.%d process=%s,%d)\n",
+	      imajor(inode), minor, current->comm, current->pid);
+
+	/* init device variables, they may be "polluted" after close
+	 * or, the device may never have been closed (i.e. open failed)
+	 */
+
+	ZERO_DEV(dev);
+
+	/* opening will always block since the
+	 * monitor will be started by open, which
+	 * means we have to wait for ATR becoming
+	 * vaild = block until valid (or card
+	 * inserted)
+	 */
+	if (filp->f_flags & O_NONBLOCK)
+		return -EAGAIN;
+
+	dev->mdelay = T_50MSEC;
+
+	/* start monitoring the cardstatus */
+	start_monitor(dev);
+
+	link->open = 1;		/* only one open per device */
+	rc = 0;
+
+	DEBUGP(2, dev, "<- cmm_open\n");
+	return nonseekable_open(inode, filp);
+}
+
+static int cmm_close(struct inode *inode, struct file *filp)
+{
+	struct cm4000_dev *dev;
+	dev_link_t *link;
+	int minor = iminor(inode);
+
+	if (minor >= CM4000_MAX_DEV)
+		return -ENODEV;
+
+	link = dev_table[minor];
+	if (link == NULL)
+		return -ENODEV;
+
+	dev = link->priv;
+
+	DEBUGP(2, dev, "-> cmm_close(maj/min=%d.%d)\n",
+	       imajor(inode), minor);
+
+	stop_monitor(dev);
+
+	ZERO_DEV(dev);
+
+	link->open = 0;		/* only one open per device */
+	wake_up(&dev->devq);	/* socket removed? */
+
+	DEBUGP(2, dev, "cmm_close\n");
+	return 0;
+}
+
+static void cmm_cm4000_release(dev_link_t * link)
+{
+	struct cm4000_dev *dev = link->priv;
+
+	/* dont terminate the monitor, rather rely on
+	 * close doing that for us.
+	 */
+	DEBUGP(3, dev, "-> cmm_cm4000_release\n");
+	while (link->open) {
+		printk(KERN_INFO MODULE_NAME ": delaying release until "
+		       "process has terminated\n");
+		/* note: don't interrupt us:
+		 * close the applications which own
+		 * the devices _first_ !
+		 */
+		wait_event(dev->devq, (link->open == 0));
+	}
+	/* dev->devq=NULL;	this cannot be zeroed earlier */
+	DEBUGP(3, dev, "<- cmm_cm4000_release\n");
+	return;
+}
+
+/*==== Interface to PCMCIA Layer =======================================*/
+
+static void cm4000_config(dev_link_t * link, int devno)
+{
+	client_handle_t handle = link->handle;
+	struct cm4000_dev *dev;
+	tuple_t tuple;
+	cisparse_t parse;
+	config_info_t conf;
+	u_char buf[64];
+	int fail_fn, fail_rc;
+	int rc;
+
+	/* read the config-tuples */
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+
+	if ((fail_rc = pcmcia_get_first_tuple(handle, &tuple)) != CS_SUCCESS) {
+		fail_fn = GetFirstTuple;
+		goto cs_failed;
+	}
+	if ((fail_rc = pcmcia_get_tuple_data(handle, &tuple)) != CS_SUCCESS) {
+		fail_fn = GetTupleData;
+		goto cs_failed;
+	}
+	if ((fail_rc =
+	     pcmcia_parse_tuple(handle, &tuple, &parse)) != CS_SUCCESS) {
+		fail_fn = ParseTuple;
+		goto cs_failed;
+	}
+	if ((fail_rc =
+	     pcmcia_get_configuration_info(handle, &conf)) != CS_SUCCESS) {
+		fail_fn = GetConfigurationInfo;
+		goto cs_failed;
+	}
+
+	link->state |= DEV_CONFIG;
+	link->conf.ConfigBase = parse.config.base;
+	link->conf.Present = parse.config.rmask[0];
+	link->conf.Vcc = conf.Vcc;
+
+	link->io.BasePort2 = 0;
+	link->io.NumPorts2 = 0;
+	link->io.Attributes2 = 0;
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	for (rc = pcmcia_get_first_tuple(handle, &tuple);
+	     rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(handle, &tuple)) {
+
+		rc = pcmcia_get_tuple_data(handle, &tuple);
+		if (rc != CS_SUCCESS)
+			continue;
+		rc = pcmcia_parse_tuple(handle, &tuple, &parse);
+		if (rc != CS_SUCCESS)
+			continue;
+
+		link->conf.ConfigIndex = parse.cftable_entry.index;
+
+		if (!parse.cftable_entry.io.nwin)
+			continue;
+
+		/* Get the IOaddr */
+		link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
+		link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
+		link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		link->io.IOAddrLines = parse.cftable_entry.io.flags
+		    & CISTPL_IO_LINES_MASK;
+
+		rc = pcmcia_request_io(handle, &link->io);
+		if (rc == CS_SUCCESS)
+			break;	/* we are done */
+	}
+	if (rc != CS_SUCCESS)
+		goto cs_release;
+
+	link->conf.IntType = 00000002;
+
+	if ((fail_rc =
+	     pcmcia_request_configuration(handle, &link->conf)) != CS_SUCCESS) {
+		fail_fn = RequestConfiguration;
+		goto cs_release;
+	}
+
+	dev = link->priv;
+	sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
+	dev->node.major = major;
+	dev->node.minor = devno;
+	dev->node.next = NULL;
+	link->dev = &dev->node;
+	link->state &= ~DEV_CONFIG_PENDING;
+
+	return;
+
+cs_failed:
+	cs_error(handle, fail_fn, fail_rc);
+cs_release:
+	cm4000_release(link);
+
+	link->state &= ~DEV_CONFIG_PENDING;
+}
+
+static int cm4000_event(event_t event, int priority,
+			event_callback_args_t *args)
+{
+	dev_link_t *link;
+	struct cm4000_dev *dev;
+	int devno;
+
+	link = args->client_data;
+	dev = link->priv;
+
+	DEBUGP(3, dev, "-> cm4000_event\n");
+	for (devno = 0; devno < CM4000_MAX_DEV; devno++)
+		if (dev_table[devno] == link)
+			break;
+
+	if (devno == CM4000_MAX_DEV)
+		return CS_BAD_ADAPTER;
+
+	switch (event) {
+	case CS_EVENT_CARD_INSERTION:
+		DEBUGP(5, dev, "CS_EVENT_CARD_INSERTION\n");
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		cm4000_config(link, devno);
+		break;
+	case CS_EVENT_CARD_REMOVAL:
+		DEBUGP(5, dev, "CS_EVENT_CARD_REMOVAL\n");
+		link->state &= ~DEV_PRESENT;
+		stop_monitor(dev);
+		break;
+	case CS_EVENT_PM_SUSPEND:
+		DEBUGP(5, dev, "CS_EVENT_PM_SUSPEND "
+		      "(fall-through to CS_EVENT_RESET_PHYSICAL)\n");
+		link->state |= DEV_SUSPEND;
+		/* fall-through */
+	case CS_EVENT_RESET_PHYSICAL:
+		DEBUGP(5, dev, "CS_EVENT_RESET_PHYSICAL\n");
+		if (link->state & DEV_CONFIG) {
+			DEBUGP(5, dev, "ReleaseConfiguration\n");
+			pcmcia_release_configuration(link->handle);
+		}
+		stop_monitor(dev);
+		break;
+	case CS_EVENT_PM_RESUME:
+		DEBUGP(5, dev, "CS_EVENT_PM_RESUME "
+		      "(fall-through to CS_EVENT_CARD_RESET)\n");
+		link->state &= ~DEV_SUSPEND;
+		/* fall-through */
+	case CS_EVENT_CARD_RESET:
+		DEBUGP(5, dev, "CS_EVENT_CARD_RESET\n");
+		if ((link->state & DEV_CONFIG)) {
+			DEBUGP(5, dev, "RequestConfiguration\n");
+			pcmcia_request_configuration(link->handle, &link->conf);
+		}
+		if (link->open)
+			start_monitor(dev);
+		break;
+	default:
+		DEBUGP(5, dev, "unknown event %.2x\n", event);
+		break;
+	}
+	DEBUGP(3, dev, "<- cm4000_event\n");
+	return CS_SUCCESS;
+}
+
+static void cm4000_release(dev_link_t *link)
+{
+	cmm_cm4000_release(link->priv);	/* delay release until device closed */
+	pcmcia_release_configuration(link->handle);
+	pcmcia_release_io(link->handle, &link->io);
+}
+
+static dev_link_t *cm4000_attach(void)
+{
+	struct cm4000_dev *dev;
+	dev_link_t *link;
+	client_reg_t client_reg;
+	int i;
+
+	for (i = 0; i < CM4000_MAX_DEV; i++)
+		if (dev_table[i] == NULL)
+			break;
+
+	if (i == CM4000_MAX_DEV) {
+		printk(KERN_NOTICE MODULE_NAME ": all devices in use\n");
+		return NULL;
+	}
+
+	/* create a new cm4000_cs device */
+	dev = kzalloc(sizeof(struct cm4000_dev), GFP_KERNEL);
+	if (dev == NULL)
+		return NULL;
+
+	link = &dev->link;
+	link->priv = dev;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+	dev_table[i] = link;
+
+	/* register with card services */
+	client_reg.dev_info = &dev_info;
+	client_reg.EventMask =
+	    CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+	    CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+	    CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+
+	i = pcmcia_register_client(&link->handle, &client_reg);
+	if (i) {
+		cs_error(link->handle, RegisterClient, i);
+		cm4000_detach(link);
+		return NULL;
+	}
+
+	init_waitqueue_head(&dev->devq);
+	init_waitqueue_head(&dev->ioq);
+	init_waitqueue_head(&dev->atrq);
+	init_waitqueue_head(&dev->readq);
+
+	return link;
+}
+
+static void cm4000_detach_by_devno(int devno, dev_link_t * link)
+{
+	struct cm4000_dev *dev = link->priv;
+
+	DEBUGP(3, dev, "-> detach_by_devno(devno=%d)\n", devno);
+
+	if (link->state & DEV_CONFIG) {
+		DEBUGP(5, dev, "device still configured (try to release it)\n");
+		cm4000_release(link);
+	}
+
+	if (link->handle) {
+		pcmcia_deregister_client(link->handle);
+	}
+
+	dev_table[devno] = NULL;
+	kfree(dev);
+	return;
+}
+
+static void cm4000_detach(dev_link_t * link)
+{
+	int i;
+
+	/* find device */
+	for (i = 0; i < CM4000_MAX_DEV; i++)
+		if (dev_table[i] == link)
+			break;
+
+	if (i == CM4000_MAX_DEV)
+		return;
+
+	cm4000_detach_by_devno(i, link);
+	return;
+}
+
+static struct file_operations cm4000_fops = {
+	.owner	= THIS_MODULE,
+	.read	= cmm_read,
+	.write	= cmm_write,
+	.ioctl	= cmm_ioctl,
+	.open	= cmm_open,
+	.release= cmm_close,
+};
+
+static struct pcmcia_device_id cm4000_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0002),
+	PCMCIA_DEVICE_PROD_ID12("CardMan", "4000", 0x2FB368CA, 0xA2BD8C39),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, cm4000_ids);
+
+static struct pcmcia_driver cm4000_driver = {
+	.owner	  = THIS_MODULE,
+	.drv	  = {
+		.name = "cm4000_cs",
+		},
+	.attach   = cm4000_attach,
+	.detach   = cm4000_detach,
+	.event	  = cm4000_event,
+	.id_table = cm4000_ids,
+};
+
+static int __init cmm_init(void)
+{
+	printk(KERN_INFO "%s\n", version);
+	pcmcia_register_driver(&cm4000_driver);
+	major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
+	if (major < 0) {
+		printk(KERN_WARNING MODULE_NAME
+			": could not get major number\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void __exit cmm_exit(void)
+{
+	int i;
+
+	printk(KERN_INFO MODULE_NAME ": unloading\n");
+	pcmcia_unregister_driver(&cm4000_driver);
+	for (i = 0; i < CM4000_MAX_DEV; i++)
+		if (dev_table[i])
+			cm4000_detach_by_devno(i, dev_table[i]);
+	unregister_chrdev(major, DEVICE_NAME);
+};
+
+module_init(cmm_init);
+module_exit(cmm_exit);
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
new file mode 100644
index 00000000000..4c698d908ff
--- /dev/null
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -0,0 +1,841 @@
+/*
+ * A driver for the Omnikey PCMCIA smartcard reader CardMan 4040
+ *
+ * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/)
+ *
+ * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * 	- add support for poll()
+ * 	- driver cleanup
+ * 	- add waitqueues
+ * 	- adhere to linux kernel coding style and policies
+ * 	- support 2.6.13 "new style" pcmcia interface
+ *
+ * The device basically is a USB CCID compliant device that has been
+ * attached to an I/O-Mapped FIFO.
+ *
+ * All rights reserved, Dual BSD/GPL Licensed.
+ */
+
+/* #define PCMCIA_DEBUG 6 */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include "cm4040_cs.h"
+
+
+#ifdef PCMCIA_DEBUG
+#define reader_to_dev(x)	(&handle_to_dev(x->link.handle))
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0600);
+#define DEBUGP(n, rdr, x, args...) do { 				\
+	if (pc_debug >= (n)) 						\
+		dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, 	\
+			   __FUNCTION__ , ##args); 			\
+	} while (0)
+#else
+#define DEBUGP(n, rdr, x, args...)
+#endif
+
+static char *version =
+"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte";
+
+#define	CCID_DRIVER_BULK_DEFAULT_TIMEOUT  	(150*HZ)
+#define	CCID_DRIVER_ASYNC_POWERUP_TIMEOUT 	(35*HZ)
+#define	CCID_DRIVER_MINIMUM_TIMEOUT 		(3*HZ)
+#define READ_WRITE_BUFFER_SIZE 512
+#define POLL_LOOP_COUNT				1000
+
+/* how often to poll for fifo status change */
+#define POLL_PERIOD 				msecs_to_jiffies(10)
+
+static void reader_release(dev_link_t *link);
+static void reader_detach(dev_link_t *link);
+
+static int major;
+
+#define		BS_READABLE	0x01
+#define		BS_WRITABLE	0x02
+
+struct reader_dev {
+	dev_link_t		link;
+	dev_node_t		node;
+	wait_queue_head_t	devq;
+	wait_queue_head_t	poll_wait;
+	wait_queue_head_t	read_wait;
+	wait_queue_head_t	write_wait;
+	unsigned long 	  	buffer_status;
+	unsigned long     	timeout;
+	unsigned char     	s_buf[READ_WRITE_BUFFER_SIZE];
+	unsigned char     	r_buf[READ_WRITE_BUFFER_SIZE];
+	struct timer_list 	poll_timer;
+};
+
+static dev_info_t dev_info = MODULE_NAME;
+static dev_link_t *dev_table[CM_MAX_DEV];
+
+#ifndef PCMCIA_DEBUG
+#define	xoutb	outb
+#define	xinb	inb
+#else
+static inline void xoutb(unsigned char val, unsigned short port)
+{
+	if (pc_debug >= 7)
+		printk(KERN_DEBUG "outb(val=%.2x,port=%.4x)\n", val, port);
+	outb(val, port);
+}
+
+static inline unsigned char xinb(unsigned short port)
+{
+	unsigned char val;
+
+	val = inb(port);
+	if (pc_debug >= 7)
+		printk(KERN_DEBUG "%.2x=inb(%.4x)\n", val, port);
+	return val;
+}
+#endif
+
+/* poll the device fifo status register.  not to be confused with
+ * the poll syscall. */
+static void cm4040_do_poll(unsigned long dummy)
+{
+	struct reader_dev *dev = (struct reader_dev *) dummy;
+	unsigned int obs = xinb(dev->link.io.BasePort1
+				+ REG_OFFSET_BUFFER_STATUS);
+
+	if ((obs & BSR_BULK_IN_FULL)) {
+		set_bit(BS_READABLE, &dev->buffer_status);
+		DEBUGP(4, dev, "waking up read_wait\n");
+		wake_up_interruptible(&dev->read_wait);
+	} else
+		clear_bit(BS_READABLE, &dev->buffer_status);
+
+	if (!(obs & BSR_BULK_OUT_FULL)) {
+		set_bit(BS_WRITABLE, &dev->buffer_status);
+		DEBUGP(4, dev, "waking up write_wait\n");
+		wake_up_interruptible(&dev->write_wait);
+	} else
+		clear_bit(BS_WRITABLE, &dev->buffer_status);
+
+	if (dev->buffer_status)
+		wake_up_interruptible(&dev->poll_wait);
+
+	mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD);
+}
+
+static void cm4040_stop_poll(struct reader_dev *dev)
+{
+	del_timer_sync(&dev->poll_timer);
+}
+
+static int wait_for_bulk_out_ready(struct reader_dev *dev)
+{
+	int i, rc;
+	int iobase = dev->link.io.BasePort1;
+
+	for (i = 0; i < POLL_LOOP_COUNT; i++) {
+		if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
+		    & BSR_BULK_OUT_FULL) == 0) {
+			DEBUGP(4, dev, "BulkOut empty (i=%d)\n", i);
+			return 1;
+		}
+	}
+
+	DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n",
+		dev->timeout);
+	rc = wait_event_interruptible_timeout(dev->write_wait,
+					      test_and_clear_bit(BS_WRITABLE,
+						       &dev->buffer_status),
+					      dev->timeout);
+
+	if (rc > 0)
+		DEBUGP(4, dev, "woke up: BulkOut empty\n");
+	else if (rc == 0)
+		DEBUGP(4, dev, "woke up: BulkOut full, returning 0 :(\n");
+	else if (rc < 0)
+		DEBUGP(4, dev, "woke up: signal arrived\n");
+
+	return rc;
+}
+
+/* Write to Sync Control Register */
+static int write_sync_reg(unsigned char val, struct reader_dev *dev)
+{
+	int iobase = dev->link.io.BasePort1;
+	int rc;
+
+	rc = wait_for_bulk_out_ready(dev);
+	if (rc <= 0)
+		return rc;
+
+	xoutb(val, iobase + REG_OFFSET_SYNC_CONTROL);
+	rc = wait_for_bulk_out_ready(dev);
+	if (rc <= 0)
+		return rc;
+
+	return 1;
+}
+
+static int wait_for_bulk_in_ready(struct reader_dev *dev)
+{
+	int i, rc;
+	int iobase = dev->link.io.BasePort1;
+
+	for (i = 0; i < POLL_LOOP_COUNT; i++) {
+		if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
+		    & BSR_BULK_IN_FULL) == BSR_BULK_IN_FULL) {
+			DEBUGP(3, dev, "BulkIn full (i=%d)\n", i);
+			return 1;
+		}
+	}
+
+	DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n",
+		dev->timeout);
+	rc = wait_event_interruptible_timeout(dev->read_wait,
+					      test_and_clear_bit(BS_READABLE,
+						 	&dev->buffer_status),
+					      dev->timeout);
+	if (rc > 0)
+		DEBUGP(4, dev, "woke up: BulkIn full\n");
+	else if (rc == 0)
+		DEBUGP(4, dev, "woke up: BulkIn not full, returning 0 :(\n");
+	else if (rc < 0)
+		DEBUGP(4, dev, "woke up: signal arrived\n");
+
+	return rc;
+}
+
+static ssize_t cm4040_read(struct file *filp, char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	struct reader_dev *dev = filp->private_data;
+	int iobase = dev->link.io.BasePort1;
+	size_t bytes_to_read;
+	unsigned long i;
+	size_t min_bytes_to_read;
+	int rc;
+	unsigned char uc;
+
+	DEBUGP(2, dev, "-> cm4040_read(%s,%d)\n", current->comm, current->pid);
+
+	if (count == 0)
+		return 0;
+
+	if (count < 10)
+		return -EFAULT;
+
+	if (filp->f_flags & O_NONBLOCK) {
+		DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n");
+		DEBUGP(2, dev, "<- cm4040_read (failure)\n");
+		return -EAGAIN;
+	}
+
+	if ((dev->link.state & DEV_PRESENT)==0)
+		return -ENODEV;
+
+	for (i = 0; i < 5; i++) {
+		rc = wait_for_bulk_in_ready(dev);
+		if (rc <= 0) {
+			DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc);
+			DEBUGP(2, dev, "<- cm4040_read (failed)\n");
+			if (rc == -ERESTARTSYS)
+				return rc;
+			return -EIO;
+		}
+	  	dev->r_buf[i] = xinb(iobase + REG_OFFSET_BULK_IN);
+#ifdef PCMCIA_DEBUG
+		if (pc_debug >= 6)
+			printk(KERN_DEBUG "%lu:%2x ", i, dev->r_buf[i]);
+	}
+	printk("\n");
+#else
+	}
+#endif
+
+	bytes_to_read = 5 + le32_to_cpu(*(__le32 *)&dev->r_buf[1]);
+
+	DEBUGP(6, dev, "BytesToRead=%lu\n", bytes_to_read);
+
+	min_bytes_to_read = min(count, bytes_to_read + 5);
+
+	DEBUGP(6, dev, "Min=%lu\n", min_bytes_to_read);
+
+	for (i = 0; i < (min_bytes_to_read-5); i++) {
+		rc = wait_for_bulk_in_ready(dev);
+		if (rc <= 0) {
+			DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc);
+			DEBUGP(2, dev, "<- cm4040_read (failed)\n");
+			if (rc == -ERESTARTSYS)
+				return rc;
+			return -EIO;
+		}
+		dev->r_buf[i+5] = xinb(iobase + REG_OFFSET_BULK_IN);
+#ifdef PCMCIA_DEBUG
+		if (pc_debug >= 6)
+			printk(KERN_DEBUG "%lu:%2x ", i, dev->r_buf[i]);
+	}
+	printk("\n");
+#else
+	}
+#endif
+
+	*ppos = min_bytes_to_read;
+	if (copy_to_user(buf, dev->r_buf, min_bytes_to_read))
+		return -EFAULT;
+
+	rc = wait_for_bulk_in_ready(dev);
+	if (rc <= 0) {
+		DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc);
+		DEBUGP(2, dev, "<- cm4040_read (failed)\n");
+		if (rc == -ERESTARTSYS)
+			return rc;
+		return -EIO;
+	}
+
+	rc = write_sync_reg(SCR_READER_TO_HOST_DONE, dev);
+	if (rc <= 0) {
+		DEBUGP(5, dev, "write_sync_reg c=%.2x\n", rc);
+		DEBUGP(2, dev, "<- cm4040_read (failed)\n");
+		if (rc == -ERESTARTSYS)
+			return rc;
+		else
+			return -EIO;
+	}
+
+	uc = xinb(iobase + REG_OFFSET_BULK_IN);
+
+	DEBUGP(2, dev, "<- cm4040_read (successfully)\n");
+	return min_bytes_to_read;
+}
+
+static ssize_t cm4040_write(struct file *filp, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	struct reader_dev *dev = filp->private_data;
+	int iobase = dev->link.io.BasePort1;
+	ssize_t rc;
+	int i;
+	unsigned int bytes_to_write;
+
+	DEBUGP(2, dev, "-> cm4040_write(%s,%d)\n", current->comm, current->pid);
+
+	if (count == 0) {
+		DEBUGP(2, dev, "<- cm4040_write empty read (successfully)\n");
+		return 0;
+	}
+
+	if (count < 5) {
+		DEBUGP(2, dev, "<- cm4040_write buffersize=%Zd < 5\n", count);
+		return -EIO;
+	}
+
+	if (filp->f_flags & O_NONBLOCK) {
+		DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n");
+		DEBUGP(4, dev, "<- cm4040_write (failure)\n");
+		return -EAGAIN;
+	}
+
+	if ((dev->link.state & DEV_PRESENT) == 0)
+		return -ENODEV;
+
+	bytes_to_write = count;
+	if (copy_from_user(dev->s_buf, buf, bytes_to_write))
+		return -EFAULT;
+
+	switch (dev->s_buf[0]) {
+		case CMD_PC_TO_RDR_XFRBLOCK:
+		case CMD_PC_TO_RDR_SECURE:
+		case CMD_PC_TO_RDR_TEST_SECURE:
+		case CMD_PC_TO_RDR_OK_SECURE:
+			dev->timeout = CCID_DRIVER_BULK_DEFAULT_TIMEOUT;
+			break;
+
+		case CMD_PC_TO_RDR_ICCPOWERON:
+			dev->timeout = CCID_DRIVER_ASYNC_POWERUP_TIMEOUT;
+			break;
+
+		case CMD_PC_TO_RDR_GETSLOTSTATUS:
+		case CMD_PC_TO_RDR_ICCPOWEROFF:
+		case CMD_PC_TO_RDR_GETPARAMETERS:
+		case CMD_PC_TO_RDR_RESETPARAMETERS:
+		case CMD_PC_TO_RDR_SETPARAMETERS:
+		case CMD_PC_TO_RDR_ESCAPE:
+		case CMD_PC_TO_RDR_ICCCLOCK:
+		default:
+			dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT;
+			break;
+	}
+
+	rc = write_sync_reg(SCR_HOST_TO_READER_START, dev);
+	if (rc <= 0) {
+		DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc);
+		DEBUGP(2, dev, "<- cm4040_write (failed)\n");
+		if (rc == -ERESTARTSYS)
+			return rc;
+		else
+			return -EIO;
+	}
+
+	DEBUGP(4, dev, "start \n");
+
+	for (i = 0; i < bytes_to_write; i++) {
+		rc = wait_for_bulk_out_ready(dev);
+		if (rc <= 0) {
+			DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2Zx\n",
+			       rc);
+			DEBUGP(2, dev, "<- cm4040_write (failed)\n");
+			if (rc == -ERESTARTSYS)
+				return rc;
+			else
+				return -EIO;
+		}
+
+		xoutb(dev->s_buf[i],iobase + REG_OFFSET_BULK_OUT);
+	}
+	DEBUGP(4, dev, "end\n");
+
+	rc = write_sync_reg(SCR_HOST_TO_READER_DONE, dev);
+
+	if (rc <= 0) {
+		DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc);
+		DEBUGP(2, dev, "<- cm4040_write (failed)\n");
+		if (rc == -ERESTARTSYS)
+			return rc;
+		else
+			return -EIO;
+	}
+
+	DEBUGP(2, dev, "<- cm4040_write (successfully)\n");
+	return count;
+}
+
+static unsigned int cm4040_poll(struct file *filp, poll_table *wait)
+{
+	struct reader_dev *dev = filp->private_data;
+	unsigned int mask = 0;
+
+	poll_wait(filp, &dev->poll_wait, wait);
+
+	if (test_and_clear_bit(BS_READABLE, &dev->buffer_status))
+		mask |= POLLIN | POLLRDNORM;
+	if (test_and_clear_bit(BS_WRITABLE, &dev->buffer_status))
+		mask |= POLLOUT | POLLWRNORM;
+
+	DEBUGP(2, dev, "<- cm4040_poll(%u)\n", mask);
+
+	return mask;
+}
+
+static int cm4040_open(struct inode *inode, struct file *filp)
+{
+	struct reader_dev *dev;
+	dev_link_t *link;
+	int minor = iminor(inode);
+
+	if (minor >= CM_MAX_DEV)
+		return -ENODEV;
+
+	link = dev_table[minor];
+	if (link == NULL || !(DEV_OK(link)))
+		return -ENODEV;
+
+	if (link->open)
+		return -EBUSY;
+
+	dev = link->priv;
+	filp->private_data = dev;
+
+	if (filp->f_flags & O_NONBLOCK) {
+		DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n");
+		return -EAGAIN;
+	}
+
+	link->open = 1;
+
+	dev->poll_timer.data = (unsigned long) dev;
+	mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD);
+
+	DEBUGP(2, dev, "<- cm4040_open (successfully)\n");
+	return nonseekable_open(inode, filp);
+}
+
+static int cm4040_close(struct inode *inode, struct file *filp)
+{
+	struct reader_dev *dev = filp->private_data;
+	dev_link_t *link;
+	int minor = iminor(inode);
+
+	DEBUGP(2, dev, "-> cm4040_close(maj/min=%d.%d)\n", imajor(inode),
+	      iminor(inode));
+
+	if (minor >= CM_MAX_DEV)
+		return -ENODEV;
+
+	link = dev_table[minor];
+	if (link == NULL)
+		return -ENODEV;
+
+	cm4040_stop_poll(dev);
+
+	link->open = 0;
+	wake_up(&dev->devq);
+
+	DEBUGP(2, dev, "<- cm4040_close\n");
+	return 0;
+}
+
+static void cm4040_reader_release(dev_link_t *link)
+{
+	struct reader_dev *dev = link->priv;
+
+	DEBUGP(3, dev, "-> cm4040_reader_release\n");
+	while (link->open) {
+		DEBUGP(3, dev, KERN_INFO MODULE_NAME ": delaying release "
+		       "until process has terminated\n");
+ 		wait_event(dev->devq, (link->open == 0));
+	}
+	DEBUGP(3, dev, "<- cm4040_reader_release\n");
+	return;
+}
+
+static void reader_config(dev_link_t *link, int devno)
+{
+	client_handle_t handle;
+	struct reader_dev *dev;
+	tuple_t tuple;
+	cisparse_t parse;
+	config_info_t conf;
+	u_char buf[64];
+	int fail_fn, fail_rc;
+	int rc;
+
+	handle = link->handle;
+
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = sizeof(buf);
+ 	tuple.TupleOffset = 0;
+
+	if ((fail_rc = pcmcia_get_first_tuple(handle, &tuple)) != CS_SUCCESS) {
+		fail_fn = GetFirstTuple;
+		goto cs_failed;
+	}
+	if ((fail_rc = pcmcia_get_tuple_data(handle, &tuple)) != CS_SUCCESS) {
+		fail_fn = GetTupleData;
+		goto cs_failed;
+	}
+	if ((fail_rc = pcmcia_parse_tuple(handle, &tuple, &parse))
+							!= CS_SUCCESS) {
+		fail_fn = ParseTuple;
+		goto cs_failed;
+	}
+	if ((fail_rc = pcmcia_get_configuration_info(handle, &conf))
+							!= CS_SUCCESS) {
+		fail_fn = GetConfigurationInfo;
+		goto cs_failed;
+	}
+
+	link->state |= DEV_CONFIG;
+	link->conf.ConfigBase = parse.config.base;
+	link->conf.Present = parse.config.rmask[0];
+	link->conf.Vcc = conf.Vcc;
+
+	link->io.BasePort2 = 0;
+	link->io.NumPorts2 = 0;
+	link->io.Attributes2 = 0;
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	for (rc = pcmcia_get_first_tuple(handle, &tuple);
+	     rc == CS_SUCCESS;
+	     rc = pcmcia_get_next_tuple(handle, &tuple)) {
+		rc = pcmcia_get_tuple_data(handle, &tuple);
+		if (rc != CS_SUCCESS)
+			continue;
+		rc = pcmcia_parse_tuple(handle, &tuple, &parse);
+		if (rc != CS_SUCCESS)
+			continue;
+
+		link->conf.ConfigIndex = parse.cftable_entry.index;
+
+		if (!parse.cftable_entry.io.nwin)
+			continue;
+
+		link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
+		link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
+		link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		link->io.IOAddrLines = parse.cftable_entry.io.flags
+						& CISTPL_IO_LINES_MASK;
+		rc = pcmcia_request_io(handle, &link->io);
+
+		dev_printk(KERN_INFO, &handle_to_dev(handle), "foo");
+		if (rc == CS_SUCCESS)
+			break;
+		else
+			dev_printk(KERN_INFO, &handle_to_dev(handle),
+				   "pcmcia_request_io failed 0x%x\n", rc);
+	}
+	if (rc != CS_SUCCESS)
+		goto cs_release;
+
+	link->conf.IntType = 00000002;
+
+	if ((fail_rc = pcmcia_request_configuration(handle,&link->conf))
+								!=CS_SUCCESS) {
+		fail_fn = RequestConfiguration;
+		dev_printk(KERN_INFO, &handle_to_dev(handle),
+			   "pcmcia_request_configuration failed 0x%x\n",
+			   fail_rc);
+		goto cs_release;
+	}
+
+	dev = link->priv;
+	sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
+	dev->node.major = major;
+	dev->node.minor = devno;
+	dev->node.next = NULL;
+	link->dev = &dev->node;
+	link->state &= ~DEV_CONFIG_PENDING;
+
+	DEBUGP(2, dev, "device " DEVICE_NAME "%d at 0x%.4x-0x%.4x\n", devno,
+	      link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1);
+	DEBUGP(2, dev, "<- reader_config (succ)\n");
+
+	return;
+
+cs_failed:
+	cs_error(handle, fail_fn, fail_rc);
+cs_release:
+	reader_release(link);
+	link->state &= ~DEV_CONFIG_PENDING;
+}
+
+static int reader_event(event_t event, int priority,
+			event_callback_args_t *args)
+{
+	dev_link_t *link;
+	struct reader_dev *dev;
+	int devno;
+
+	link = args->client_data;
+	dev = link->priv;
+	DEBUGP(3, dev, "-> reader_event\n");
+	for (devno = 0; devno < CM_MAX_DEV; devno++) {
+		if (dev_table[devno] == link)
+			break;
+	}
+	if (devno == CM_MAX_DEV)
+		return CS_BAD_ADAPTER;
+
+	switch (event) {
+		case CS_EVENT_CARD_INSERTION:
+			DEBUGP(5, dev, "CS_EVENT_CARD_INSERTION\n");
+			link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+			reader_config(link, devno);
+			break;
+		case CS_EVENT_CARD_REMOVAL:
+			DEBUGP(5, dev, "CS_EVENT_CARD_REMOVAL\n");
+			link->state &= ~DEV_PRESENT;
+			break;
+		case CS_EVENT_PM_SUSPEND:
+			DEBUGP(5, dev, "CS_EVENT_PM_SUSPEND "
+			      "(fall-through to CS_EVENT_RESET_PHYSICAL)\n");
+			link->state |= DEV_SUSPEND;
+
+		case CS_EVENT_RESET_PHYSICAL:
+			DEBUGP(5, dev, "CS_EVENT_RESET_PHYSICAL\n");
+			if (link->state & DEV_CONFIG) {
+		  		DEBUGP(5, dev, "ReleaseConfiguration\n");
+		  		pcmcia_release_configuration(link->handle);
+			}
+			break;
+		case CS_EVENT_PM_RESUME:
+			DEBUGP(5, dev, "CS_EVENT_PM_RESUME "
+			      "(fall-through to CS_EVENT_CARD_RESET)\n");
+			link->state &= ~DEV_SUSPEND;
+
+		case CS_EVENT_CARD_RESET:
+			DEBUGP(5, dev, "CS_EVENT_CARD_RESET\n");
+			if ((link->state & DEV_CONFIG)) {
+				DEBUGP(5, dev, "RequestConfiguration\n");
+		  		pcmcia_request_configuration(link->handle,
+							     &link->conf);
+			}
+			break;
+		default:
+			DEBUGP(5, dev, "reader_event: unknown event %.2x\n",
+			       event);
+			break;
+	}
+	DEBUGP(3, dev, "<- reader_event\n");
+	return CS_SUCCESS;
+}
+
+static void reader_release(dev_link_t *link)
+{
+	cm4040_reader_release(link->priv);
+	pcmcia_release_configuration(link->handle);
+	pcmcia_release_io(link->handle, &link->io);
+}
+
+static dev_link_t *reader_attach(void)
+{
+	struct reader_dev *dev;
+	dev_link_t *link;
+	client_reg_t client_reg;
+	int i;
+
+	for (i = 0; i < CM_MAX_DEV; i++) {
+		if (dev_table[i] == NULL)
+			break;
+	}
+
+	if (i == CM_MAX_DEV)
+		return NULL;
+
+	dev = kzalloc(sizeof(struct reader_dev), GFP_KERNEL);
+	if (dev == NULL)
+		return NULL;
+
+	dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT;
+	dev->buffer_status = 0;
+
+	link = &dev->link;
+	link->priv = dev;
+
+	link->conf.IntType = INT_MEMORY_AND_IO;
+	dev_table[i] = link;
+
+	client_reg.dev_info = &dev_info;
+	client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
+	client_reg.EventMask=
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+	i = pcmcia_register_client(&link->handle, &client_reg);
+	if (i) {
+		cs_error(link->handle, RegisterClient, i);
+		reader_detach(link);
+		return NULL;
+	}
+	init_waitqueue_head(&dev->devq);
+	init_waitqueue_head(&dev->poll_wait);
+	init_waitqueue_head(&dev->read_wait);
+	init_waitqueue_head(&dev->write_wait);
+	init_timer(&dev->poll_timer);
+	dev->poll_timer.function = &cm4040_do_poll;
+
+	return link;
+}
+
+static void reader_detach_by_devno(int devno, dev_link_t *link)
+{
+	struct reader_dev *dev = link->priv;
+
+	if (link->state & DEV_CONFIG) {
+		DEBUGP(5, dev, "device still configured (try to release it)\n");
+		reader_release(link);
+	}
+
+	pcmcia_deregister_client(link->handle);
+	dev_table[devno] = NULL;
+	DEBUGP(5, dev, "freeing dev=%p\n", dev);
+	cm4040_stop_poll(dev);
+	kfree(dev);
+	return;
+}
+
+static void reader_detach(dev_link_t *link)
+{
+	int i;
+
+	/* find device */
+	for (i = 0; i < CM_MAX_DEV; i++) {
+		if (dev_table[i] == link)
+			break;
+	}
+	if (i == CM_MAX_DEV)
+		return;
+
+	reader_detach_by_devno(i, link);
+	return;
+}
+
+static struct file_operations reader_fops = {
+	.owner		= THIS_MODULE,
+	.read		= cm4040_read,
+	.write		= cm4040_write,
+	.open		= cm4040_open,
+	.release	= cm4040_close,
+	.poll		= cm4040_poll,
+};
+
+static struct pcmcia_device_id cm4040_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0200),
+	PCMCIA_DEVICE_PROD_ID12("OMNIKEY", "CardMan 4040",
+				0xE32CDD8C, 0x8F23318B),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, cm4040_ids);
+
+static struct pcmcia_driver reader_driver = {
+  	.owner		= THIS_MODULE,
+  	.drv		= {
+		.name	= "cm4040_cs",
+	},
+	.attach		= reader_attach,
+	.detach		= reader_detach,
+	.event		= reader_event,
+	.id_table	= cm4040_ids,
+};
+
+static int __init cm4040_init(void)
+{
+	printk(KERN_INFO "%s\n", version);
+	pcmcia_register_driver(&reader_driver);
+	major = register_chrdev(0, DEVICE_NAME, &reader_fops);
+	if (major < 0) {
+		printk(KERN_WARNING MODULE_NAME
+			": could not get major number\n");
+		return -1;
+	}
+	return 0;
+}
+
+static void __exit cm4040_exit(void)
+{
+	int i;
+
+	printk(KERN_INFO MODULE_NAME ": unloading\n");
+	pcmcia_unregister_driver(&reader_driver);
+	for (i = 0; i < CM_MAX_DEV; i++) {
+		if (dev_table[i])
+			reader_detach_by_devno(i, dev_table[i]);
+	}
+	unregister_chrdev(major, DEVICE_NAME);
+}
+
+module_init(cm4040_init);
+module_exit(cm4040_exit);
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/char/pcmcia/cm4040_cs.h b/drivers/char/pcmcia/cm4040_cs.h
new file mode 100644
index 00000000000..9a8b805c509
--- /dev/null
+++ b/drivers/char/pcmcia/cm4040_cs.h
@@ -0,0 +1,47 @@
+#ifndef	_CM4040_H_
+#define	_CM4040_H_
+
+#define	CM_MAX_DEV		4
+
+#define	DEVICE_NAME		"cmx"
+#define	MODULE_NAME		"cm4040_cs"
+
+#define REG_OFFSET_BULK_OUT      0
+#define REG_OFFSET_BULK_IN       0
+#define REG_OFFSET_BUFFER_STATUS 1
+#define REG_OFFSET_SYNC_CONTROL  2
+
+#define BSR_BULK_IN_FULL  0x02
+#define BSR_BULK_OUT_FULL 0x01
+
+#define SCR_HOST_TO_READER_START 0x80
+#define SCR_ABORT                0x40
+#define SCR_EN_NOTIFY            0x20
+#define SCR_ACK_NOTIFY           0x10
+#define SCR_READER_TO_HOST_DONE  0x08
+#define SCR_HOST_TO_READER_DONE  0x04
+#define SCR_PULSE_INTERRUPT      0x02
+#define SCR_POWER_DOWN           0x01
+
+
+#define  CMD_PC_TO_RDR_ICCPOWERON       0x62
+#define  CMD_PC_TO_RDR_GETSLOTSTATUS    0x65
+#define  CMD_PC_TO_RDR_ICCPOWEROFF      0x63
+#define  CMD_PC_TO_RDR_SECURE           0x69
+#define  CMD_PC_TO_RDR_GETPARAMETERS    0x6C
+#define  CMD_PC_TO_RDR_RESETPARAMETERS  0x6D
+#define  CMD_PC_TO_RDR_SETPARAMETERS    0x61
+#define  CMD_PC_TO_RDR_XFRBLOCK         0x6F
+#define  CMD_PC_TO_RDR_ESCAPE           0x6B
+#define  CMD_PC_TO_RDR_ICCCLOCK         0x6E
+#define  CMD_PC_TO_RDR_TEST_SECURE      0x74
+#define  CMD_PC_TO_RDR_OK_SECURE        0x89
+
+
+#define  CMD_RDR_TO_PC_SLOTSTATUS         0x81
+#define  CMD_RDR_TO_PC_DATABLOCK          0x80
+#define  CMD_RDR_TO_PC_PARAMETERS         0x82
+#define  CMD_RDR_TO_PC_ESCAPE             0x83
+#define  CMD_RDR_TO_PC_OK_SECURE          0x89
+
+#endif	/* _CM4040_H_ */
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 82c6abde68d..62aa0e534a6 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -1,7 +1,7 @@
 /*
  * linux/drivers/char/synclink.c
  *
- * $Id: synclink.c,v 4.37 2005/09/07 13:13:19 paulkf Exp $
+ * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
  *
  * Device driver for Microgate SyncLink ISA and PCI
  * high speed multiprotocol serial adapters.
@@ -101,6 +101,7 @@
 #include <linux/termios.h>
 #include <linux/workqueue.h>
 #include <linux/hdlc.h>
+#include <linux/dma-mapping.h>
 
 #ifdef CONFIG_HDLC_MODULE
 #define CONFIG_HDLC 1
@@ -148,6 +149,7 @@ typedef struct _DMABUFFERENTRY
 	u32 link;	/* 32-bit flat link to next buffer entry */
 	char *virt_addr;	/* virtual address of data buffer */
 	u32 phys_entry;	/* physical address of this buffer entry */
+	dma_addr_t dma_addr;
 } DMABUFFERENTRY, *DMAPBUFFERENTRY;
 
 /* The queue of BH actions to be performed */
@@ -233,7 +235,8 @@ struct mgsl_struct {
 	int ri_chkcount;
 
 	char *buffer_list;		/* virtual address of Rx & Tx buffer lists */
-	unsigned long buffer_list_phys;
+	u32 buffer_list_phys;
+	dma_addr_t buffer_list_dma_addr;
 
 	unsigned int rx_buffer_count;	/* count of total allocated Rx buffers */
 	DMABUFFERENTRY *rx_buffer_list;	/* list of receive buffer entries */
@@ -896,7 +899,7 @@ module_param_array(txdmabufs, int, NULL, 0);
 module_param_array(txholdbufs, int, NULL, 0);
 
 static char *driver_name = "SyncLink serial driver";
-static char *driver_version = "$Revision: 4.37 $";
+static char *driver_version = "$Revision: 4.38 $";
 
 static int synclink_init_one (struct pci_dev *dev,
 				     const struct pci_device_id *ent);
@@ -3811,11 +3814,10 @@ static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
 		/* inspect portions of the buffer while other portions are being */
 		/* updated by the adapter using Bus Master DMA. */
 
-		info->buffer_list = kmalloc(BUFFERLISTSIZE, GFP_KERNEL | GFP_DMA);
-		if ( info->buffer_list == NULL )
+		info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
+		if (info->buffer_list == NULL)
 			return -ENOMEM;
-			
-		info->buffer_list_phys = isa_virt_to_bus(info->buffer_list);
+		info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
 	}
 
 	/* We got the memory for the buffer entry lists. */
@@ -3882,8 +3884,8 @@ static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
  */
 static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
 {
-	if ( info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI )
-		kfree(info->buffer_list);
+	if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
+		dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
 		
 	info->buffer_list = NULL;
 	info->rx_buffer_list = NULL;
@@ -3910,7 +3912,7 @@ static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
 static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
 {
 	int i;
-	unsigned long phys_addr;
+	u32 phys_addr;
 
 	/* Allocate page sized buffers for the receive buffer list */
 
@@ -3922,11 +3924,10 @@ static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *Buff
 			info->last_mem_alloc += DMABUFFERSIZE;
 		} else {
 			/* ISA adapter uses system memory. */
-			BufferList[i].virt_addr = 
-				kmalloc(DMABUFFERSIZE, GFP_KERNEL | GFP_DMA);
-			if ( BufferList[i].virt_addr == NULL )
+			BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
+			if (BufferList[i].virt_addr == NULL)
 				return -ENOMEM;
-			phys_addr = isa_virt_to_bus(BufferList[i].virt_addr);
+			phys_addr = (u32)(BufferList[i].dma_addr);
 		}
 		BufferList[i].phys_addr = phys_addr;
 	}
@@ -3957,7 +3958,7 @@ static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *Buf
 		for ( i = 0 ; i < Buffercount ; i++ ) {
 			if ( BufferList[i].virt_addr ) {
 				if ( info->bus_type != MGSL_BUS_TYPE_PCI )
-					kfree(BufferList[i].virt_addr);
+					dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
 				BufferList[i].virt_addr = NULL;
 			}
 		}
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 303f1588046..0b283d24673 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -43,6 +43,13 @@ static void user_reader_timeout(unsigned long ptr)
 {
 	struct tpm_chip *chip = (struct tpm_chip *) ptr;
 
+	schedule_work(&chip->work);
+}
+
+static void timeout_work(void * ptr)
+{
+	struct tpm_chip *chip = ptr;
+
 	down(&chip->buffer_mutex);
 	atomic_set(&chip->data_pending, 0);
 	memset(chip->data_buffer, 0, TPM_BUFSIZE);
@@ -428,8 +435,7 @@ ssize_t tpm_read(struct file * file, char __user *buf,
 			ret_size = size;
 
 		down(&chip->buffer_mutex);
-		if (copy_to_user
-		    ((void __user *) buf, chip->data_buffer, ret_size))
+		if (copy_to_user(buf, chip->data_buffer, ret_size))
 			ret_size = -EFAULT;
 		up(&chip->buffer_mutex);
 	}
@@ -460,7 +466,7 @@ void tpm_remove_hardware(struct device *dev)
 	sysfs_remove_group(&dev->kobj, chip->vendor->attr_group);
 
 	dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &=
-		!(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES));
+		~(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES));
 
 	kfree(chip);
 
@@ -528,6 +534,8 @@ int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry)
 	init_MUTEX(&chip->tpm_mutex);
 	INIT_LIST_HEAD(&chip->list);
 
+	INIT_WORK(&chip->work, timeout_work, chip);
+
 	init_timer(&chip->user_read_timer);
 	chip->user_read_timer.function = user_reader_timeout;
 	chip->user_read_timer.data = (unsigned long) chip;
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 9293bcc4dc6..159882ca69d 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -50,7 +50,11 @@ struct tpm_vendor_specific {
 	u8 req_complete_mask;
 	u8 req_complete_val;
 	u8 req_canceled;
-	u16 base;		/* TPM base address */
+	void __iomem *iobase;		/* ioremapped address */
+	unsigned long base;		/* TPM base address */
+
+	int region_size;
+	int have_region;
 
 	int (*recv) (struct tpm_chip *, u8 *, size_t);
 	int (*send) (struct tpm_chip *, u8 *, size_t);
@@ -73,6 +77,7 @@ struct tpm_chip {
 	struct semaphore buffer_mutex;
 
 	struct timer_list user_read_timer;	/* user needs to claim result */
+	struct work_struct work;
 	struct semaphore tpm_mutex;	/* tpm is processing */
 
 	struct tpm_vendor_specific *vendor;
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index 32e01450c42..deb4b5c8091 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -19,14 +19,8 @@
  * 
  */
 
-#include <linux/platform_device.h>
 #include "tpm.h"
-
-/* Atmel definitions */
-enum tpm_atmel_addr {
-	TPM_ATMEL_BASE_ADDR_LO = 0x08,
-	TPM_ATMEL_BASE_ADDR_HI = 0x09
-};
+#include "tpm_atmel.h"
 
 /* write status bits */
 enum tpm_atmel_write_status {
@@ -53,13 +47,13 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		return -EIO;
 
 	for (i = 0; i < 6; i++) {
-		status = inb(chip->vendor->base + 1);
+		status = atmel_getb(chip, 1);
 		if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 			dev_err(chip->dev,
 				"error reading header\n");
 			return -EIO;
 		}
-		*buf++ = inb(chip->vendor->base);
+		*buf++ = atmel_getb(chip, 0);
 	}
 
 	/* size of the data received */
@@ -70,7 +64,7 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		dev_err(chip->dev,
 			"Recv size(%d) less than available space\n", size);
 		for (; i < size; i++) {	/* clear the waiting data anyway */
-			status = inb(chip->vendor->base + 1);
+			status = atmel_getb(chip, 1);
 			if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 				dev_err(chip->dev,
 					"error reading data\n");
@@ -82,17 +76,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 
 	/* read all the data available */
 	for (; i < size; i++) {
-		status = inb(chip->vendor->base + 1);
+		status = atmel_getb(chip, 1);
 		if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 			dev_err(chip->dev,
 				"error reading data\n");
 			return -EIO;
 		}
-		*buf++ = inb(chip->vendor->base);
+		*buf++ = atmel_getb(chip, 0);
 	}
 
 	/* make sure data available is gone */
-	status = inb(chip->vendor->base + 1);
+	status = atmel_getb(chip, 1);
 	if (status & ATML_STATUS_DATA_AVAIL) {
 		dev_err(chip->dev, "data available is stuck\n");
 		return -EIO;
@@ -108,7 +102,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
 	dev_dbg(chip->dev, "tpm_atml_send:\n");
 	for (i = 0; i < count; i++) {
 		dev_dbg(chip->dev, "%d 0x%x(%d)\n",  i, buf[i], buf[i]);
-		outb(buf[i], chip->vendor->base);
+		atmel_putb(buf[i], chip, 0);
 	}
 
 	return count;
@@ -116,12 +110,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
 
 static void tpm_atml_cancel(struct tpm_chip *chip)
 {
-	outb(ATML_STATUS_ABORT, chip->vendor->base + 1);
+	atmel_putb(ATML_STATUS_ABORT, chip, 1);
 }
 
 static u8 tpm_atml_status(struct tpm_chip *chip)
 {
-	return inb(chip->vendor->base + 1);
+	return atmel_getb(chip, 1);
 }
 
 static struct file_operations atmel_ops = {
@@ -162,12 +156,16 @@ static struct tpm_vendor_specific tpm_atmel = {
 
 static struct platform_device *pdev;
 
-static void __devexit tpm_atml_remove(struct device *dev)
+static void atml_plat_remove(void)
 {
-	struct tpm_chip *chip = dev_get_drvdata(dev);
+	struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);
+
 	if (chip) {
-		release_region(chip->vendor->base, 2);
+		if (chip->vendor->have_region)
+			atmel_release_region(chip->vendor->base, chip->vendor->region_size);
+		atmel_put_base_addr(chip->vendor);
 		tpm_remove_hardware(chip->dev);
+		platform_device_unregister(pdev);
 	}
 }
 
@@ -182,72 +180,40 @@ static struct device_driver atml_drv = {
 static int __init init_atmel(void)
 {
 	int rc = 0;
-	int lo, hi;
 
 	driver_register(&atml_drv);
 
-	lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
-	hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
-
-	tpm_atmel.base = (hi<<8)|lo;
-
-	/* verify that it is an Atmel part */
-	if (tpm_read_index(TPM_ADDR, 4) != 'A' || tpm_read_index(TPM_ADDR, 5) != 'T'
-	    || tpm_read_index(TPM_ADDR, 6) != 'M' || tpm_read_index(TPM_ADDR, 7) != 'L') {
-		return -ENODEV;
-	}
-
-	/* verify chip version number is 1.1 */
-	if (	(tpm_read_index(TPM_ADDR, 0x00) != 0x01) ||
-		(tpm_read_index(TPM_ADDR, 0x01) != 0x01 ))
-		return -ENODEV;
-
-	pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
-	if ( !pdev )
-		return -ENOMEM;
-
-	pdev->name = "tpm_atmel0";
-	pdev->id = -1;
-	pdev->num_resources = 0;
-	pdev->dev.release = tpm_atml_remove;
-	pdev->dev.driver = &atml_drv;
-
-	if ((rc = platform_device_register(pdev)) < 0) {
-		kfree(pdev);
-		pdev = NULL;
-		return rc;
+	if (atmel_get_base_addr(&tpm_atmel) != 0) {
+		rc = -ENODEV;
+		goto err_unreg_drv;
 	}
 
-	if (request_region(tpm_atmel.base, 2, "tpm_atmel0") == NULL ) {
-		platform_device_unregister(pdev);
-		kfree(pdev);
-		pdev = NULL;
-		return -EBUSY;
-	}
+	tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1;
 
-	if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0) {
-		release_region(tpm_atmel.base, 2);
-		platform_device_unregister(pdev);
-		kfree(pdev);
-		pdev = NULL;
-		return rc;
+	if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) {
+		rc = PTR_ERR(pdev);
+		goto err_rel_reg;
 	}
 
-	dev_info(&pdev->dev, "Atmel TPM 1.1, Base Address: 0x%x\n",
-			tpm_atmel.base);
+	if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0)
+		goto err_unreg_dev;
 	return 0;
+
+err_unreg_dev:
+	platform_device_unregister(pdev);
+err_rel_reg:
+	if (tpm_atmel.have_region)
+		atmel_release_region(tpm_atmel.base, tpm_atmel.region_size);
+	atmel_put_base_addr(&tpm_atmel);
+err_unreg_drv:
+	driver_unregister(&atml_drv);
+	return rc;
 }
 
 static void __exit cleanup_atmel(void)
 {
-	if (pdev) {
-		tpm_atml_remove(&pdev->dev);
-		platform_device_unregister(pdev);
-		kfree(pdev);
-		pdev = NULL;
-	}
-
 	driver_unregister(&atml_drv);
+	atml_plat_remove();
 }
 
 module_init(init_atmel);
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
new file mode 100644
index 00000000000..3c5b9a8d1c4
--- /dev/null
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2005 IBM Corporation
+ *
+ * Authors:
+ * Kylene Hall <kjhall@us.ibm.com>
+ *
+ * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ *
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ * These difference are required on power because the device must be
+ * discovered through the device tree and iomap must be used to get
+ * around the need for holes in the io_page_mask.  This does not happen
+ * automatically because the tpm is not a normal pci device and lives
+ * under the root node.
+ *
+ */
+
+#ifdef CONFIG_PPC64
+#define atmel_getb(chip, offset) readb(chip->vendor->iobase + offset);
+#define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset)
+#define atmel_request_region request_mem_region
+#define atmel_release_region release_mem_region
+static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+{
+	iounmap(vendor->iobase);
+}
+
+static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
+{
+	struct device_node *dn;
+	unsigned long address, size;
+	unsigned int *reg;
+	int reglen;
+	int naddrc;
+	int nsizec;
+
+	dn = of_find_node_by_name(NULL, "tpm");
+
+	if (!dn)
+		return 1;
+
+	if (!device_is_compatible(dn, "AT97SC3201")) {
+		of_node_put(dn);
+		return 1;
+	}
+
+	reg = (unsigned int *) get_property(dn, "reg", &reglen);
+	naddrc = prom_n_addr_cells(dn);
+	nsizec = prom_n_size_cells(dn);
+
+	of_node_put(dn);
+
+
+	if (naddrc == 2)
+		address = ((unsigned long) reg[0] << 32) | reg[1];
+	else
+		address = reg[0];
+
+	if (nsizec == 2)
+		size =
+		    ((unsigned long) reg[naddrc] << 32) | reg[naddrc + 1];
+	else
+		size = reg[naddrc];
+
+	vendor->base = address;
+	vendor->region_size = size;
+	vendor->iobase = ioremap(address, size);
+	return 0;
+}
+#else
+#define atmel_getb(chip, offset) inb(chip->vendor->base + offset)
+#define atmel_putb(val, chip, offset) outb(val, chip->vendor->base + offset)
+#define atmel_request_region request_region
+#define atmel_release_region release_region
+/* Atmel definitions */
+enum tpm_atmel_addr {
+	TPM_ATMEL_BASE_ADDR_LO = 0x08,
+	TPM_ATMEL_BASE_ADDR_HI = 0x09
+};
+
+/* Verify this is a 1.1 Atmel TPM */
+static int atmel_verify_tpm11(void)
+{
+
+	/* verify that it is an Atmel part */
+	if (tpm_read_index(TPM_ADDR, 4) != 'A' ||
+	    tpm_read_index(TPM_ADDR, 5) != 'T' ||
+	    tpm_read_index(TPM_ADDR, 6) != 'M' ||
+	    tpm_read_index(TPM_ADDR, 7) != 'L')
+		return 1;
+
+	/* query chip for its version number */
+	if (tpm_read_index(TPM_ADDR, 0x00) != 1 ||
+	    tpm_read_index(TPM_ADDR, 0x01) != 1)
+		return 1;
+
+	/* This is an atmel supported part */
+	return 0;
+}
+
+static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+{
+}
+
+/* Determine where to talk to device */
+static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
+					 *vendor)
+{
+	int lo, hi;
+
+	if (atmel_verify_tpm11() != 0)
+		return 1;
+
+	lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
+	hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
+
+	vendor->base = (hi << 8) | lo;
+	vendor->region_size = 2;
+
+	return 0;
+}
+#endif
diff --git a/drivers/char/watchdog/booke_wdt.c b/drivers/char/watchdog/booke_wdt.c
index abc30cca664..65830ec7104 100644
--- a/drivers/char/watchdog/booke_wdt.c
+++ b/drivers/char/watchdog/booke_wdt.c
@@ -4,7 +4,7 @@
  * Watchdog timer for PowerPC Book-E systems
  *
  * Author: Matthew McClintock
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2005 Freescale Semiconductor Inc.
  *
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index ea0806c82be..8a5c7b286b2 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -399,34 +399,6 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
 	return dev->irq;
 }
 
-static void __devinit init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base)
-{
-	unsigned int rev;
-	u8 dma_state;
-
-	DBG(("init_dma_sl82c105(hwif: ide%d, dma_base: 0x%08x)\n", hwif->index, dma_base));
-
-	hwif->autodma = 0;
-
-	if (!dma_base)
-		return;
-
-	dma_state = hwif->INB(dma_base + 2);
-	rev = sl82c105_bridge_revision(hwif->pci_dev);
-	if (rev <= 5) {
-		printk("    %s: Winbond 553 bridge revision %d, BM-DMA disabled\n",
-		       hwif->name, rev);
-		dma_state &= ~0x60;
-	} else {
-		dma_state |= 0x60;
-		if (!noautodma)
-			hwif->autodma = 1;
-	}
-	hwif->OUTB(dma_state, dma_base + 2);
-
-	ide_setup_dma(hwif, dma_base, 8);
-}
-
 /*
  * Initialise the chip
  */
@@ -434,6 +406,8 @@ static void __devinit init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base
 static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = hwif->pci_dev;
+	unsigned int rev;
+	u8 dma_state;
 	u32 val;
 	
 	DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
@@ -455,33 +429,54 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
 	pci_read_config_dword(dev, 0x40, &val);
 	*((u32 *)&hwif->hwif_data) = val;
 	
+	hwif->atapi_dma = 0;
+	hwif->mwdma_mask = 0;
+	hwif->swdma_mask = 0;
+	hwif->autodma = 0;
+
 	if (!hwif->dma_base)
 		return;
 
-	hwif->atapi_dma = 1;
-	hwif->mwdma_mask = 0x07;
-	hwif->swdma_mask = 0x07;
-
+	dma_state = hwif->INB(hwif->dma_base + 2) & ~0x60;
+	rev = sl82c105_bridge_revision(hwif->pci_dev);
+	if (rev <= 5) {
+		/*
+		 * Never ever EVER under any circumstances enable
+		 * DMA when the bridge is this old.
+		 */
+		printk("    %s: Winbond 553 bridge revision %d, BM-DMA disabled\n",
+		       hwif->name, rev);
+	} else {
 #ifdef CONFIG_BLK_DEV_IDEDMA
-	hwif->ide_dma_check = &sl82c105_check_drive;
-	hwif->ide_dma_on = &sl82c105_ide_dma_on;
-	hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly;
-	hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq;
-	hwif->dma_start = &sl82c105_ide_dma_start;
-	hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout;
-
-	if (!noautodma)
-		hwif->autodma = 1;
-	hwif->drives[0].autodma = hwif->autodma;
-	hwif->drives[1].autodma = hwif->autodma;
+		dma_state |= 0x60;
+
+		hwif->atapi_dma = 1;
+		hwif->mwdma_mask = 0x07;
+		hwif->swdma_mask = 0x07;
+
+		hwif->ide_dma_check = &sl82c105_check_drive;
+		hwif->ide_dma_on = &sl82c105_ide_dma_on;
+		hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly;
+		hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq;
+		hwif->dma_start = &sl82c105_ide_dma_start;
+		hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout;
+
+		if (!noautodma)
+			hwif->autodma = 1;
+		hwif->drives[0].autodma = hwif->autodma;
+		hwif->drives[1].autodma = hwif->autodma;
+
+		if (hwif->mate)
+			hwif->serialized = hwif->mate->serialized = 1;
 #endif /* CONFIG_BLK_DEV_IDEDMA */
+	}
+	hwif->OUTB(dma_state, hwif->dma_base + 2);
 }
 
 static ide_pci_device_t sl82c105_chipset __devinitdata = {
 	.name		= "W82C105",
 	.init_chipset	= init_chipset_sl82c105,
 	.init_hwif	= init_hwif_sl82c105,
-	.init_dma	= init_dma_sl82c105,
 	.channels	= 2,
 	.autodma	= NOAUTODMA,
 	.enablebits	= {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index b3e65a65d20..136911a86e8 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1667,11 +1667,16 @@ static struct macio_driver pmac_ide_macio_driver =
 };
 
 static struct pci_device_id pmac_ide_pci_match[] = {
-	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 };
 
 static struct pci_driver pmac_ide_pci_driver = {
diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c
index 4b71fd6f7ae..7972c73bc14 100644
--- a/drivers/media/common/ir-common.c
+++ b/drivers/media/common/ir-common.c
@@ -126,6 +126,66 @@ IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = {
 };
 EXPORT_SYMBOL_GPL(ir_codes_winfast);
 
+IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE] = {
+	[ 0x59 ] = KEY_MUTE,
+	[ 0x4a ] = KEY_POWER,
+
+	[ 0x18 ] = KEY_TEXT,
+	[ 0x26 ] = KEY_TV,
+	[ 0x3d ] = KEY_PRINT,
+
+	[ 0x48 ] = KEY_RED,
+	[ 0x04 ] = KEY_GREEN,
+	[ 0x11 ] = KEY_YELLOW,
+	[ 0x00 ] = KEY_BLUE,
+
+	[ 0x2d ] = KEY_VOLUMEUP,
+	[ 0x1e ] = KEY_VOLUMEDOWN,
+
+	[ 0x49 ] = KEY_MENU,
+
+	[ 0x16 ] = KEY_CHANNELUP,
+	[ 0x17 ] = KEY_CHANNELDOWN,
+
+	[ 0x20 ] = KEY_UP,
+	[ 0x21 ] = KEY_DOWN,
+	[ 0x22 ] = KEY_LEFT,
+	[ 0x23 ] = KEY_RIGHT,
+	[ 0x0d ] = KEY_SELECT,
+
+
+
+	[ 0x08 ] = KEY_BACK,
+	[ 0x07 ] = KEY_REFRESH,
+
+	[ 0x2f ] = KEY_ZOOM,
+	[ 0x29 ] = KEY_RECORD,
+
+	[ 0x4b ] = KEY_PAUSE,
+	[ 0x4d ] = KEY_REWIND,
+	[ 0x2e ] = KEY_PLAY,
+	[ 0x4e ] = KEY_FORWARD,
+	[ 0x53 ] = KEY_PREVIOUS,
+	[ 0x4c ] = KEY_STOP,
+	[ 0x54 ] = KEY_NEXT,
+
+	[ 0x69 ] = KEY_KP0,
+	[ 0x6a ] = KEY_KP1,
+	[ 0x6b ] = KEY_KP2,
+	[ 0x6c ] = KEY_KP3,
+	[ 0x6d ] = KEY_KP4,
+	[ 0x6e ] = KEY_KP5,
+	[ 0x6f ] = KEY_KP6,
+	[ 0x70 ] = KEY_KP7,
+	[ 0x71 ] = KEY_KP8,
+	[ 0x72 ] = KEY_KP9,
+
+	[ 0x74 ] = KEY_CHANNEL,
+	[ 0x0a ] = KEY_BACKSPACE,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_pinnacle);
+
 /* empty keytable, can be used as placeholder for not-yet created keytables */
 IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE] = {
 	[ 42 ] = KEY_COFFEE,
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index d7417eac2ab..2583a865a58 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -7,6 +7,7 @@ config DVB_B2C2_FLEXCOP
 	select DVB_NXT2002
 	select DVB_STV0297
 	select DVB_BCM3510
+	select DVB_LGDT330X
 	help
 	  Support for the digital TV receiver chip made by B2C2 Inc. included in
 	  Technisats PCI cards and USB boxes.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 199b0118885..1a3b3c7e5e9 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -333,4 +333,18 @@ config VIDEO_M32R_AR_M64278
 	  Say Y here to use the Renesas M64278E-800 camera module,
 	  which supports VGA(640x480 pixcels) size of images.
 
+config VIDEO_AUDIO_DECODER
+	tristate "Add support for additional audio chipsets"
+	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	---help---
+	  Say Y here to compile drivers for WM8775 and CS53L32A audio
+	  decoders.
+
+config VIDEO_DECODER
+	tristate "Add support for additional video chipsets"
+	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	---help---
+	  Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
+	  video  decoders.
+
 endmenu
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 3ac46599240..82060f9909d 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -36,10 +36,11 @@ obj-$(CONFIG_VIDEO_CPIA) += cpia.o
 obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
 obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o
 obj-$(CONFIG_VIDEO_MEYE) += meye.o
-obj-$(CONFIG_VIDEO_SAA7134) += saa7134/
+obj-$(CONFIG_VIDEO_SAA7134) += ir-kbd-i2c.o saa7134/
 obj-$(CONFIG_VIDEO_CX88) += cx88/
 obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
 obj-$(CONFIG_VIDEO_EM28XX) += saa711x.o tvp5150.o
+obj-$(CONFIG_VIDEO_AUDIO_DECODER) += wm8775.o cs53l32a.o
 obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
 obj-$(CONFIG_VIDEO_MXB) += saa7111.o tuner.o tda9840.o tea6415c.o tea6420.o mxb.o
 obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
@@ -55,4 +56,6 @@ obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
 
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
+obj-$(CONFIG_VIDEO_DECODER)     += saa7115.o cx25840/ saa7127.o
+
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c
index 3413bace443..e31ebb11c46 100644
--- a/drivers/media/video/bttv-cards.c
+++ b/drivers/media/video/bttv-cards.c
@@ -2133,7 +2133,10 @@ struct tvcard bttv_tvcards[] = {
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
 		.has_dvb        = 1,
+		.has_remote	= 1,
+		.gpiomask	= 0x1b,
 		.no_gpioirq     = 1,
+		.any_irq		= 1,
 	},
 	[BTTV_BOARD_PV143] = {
 		/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
@@ -2796,7 +2799,24 @@ struct tvcard bttv_tvcards[] = {
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
 	},
-
+		/* ---- card 0x8e ---------------------------------- */
+	[BTTV_BOARD_SABRENT_TVFM] = {
+		.name		= "Sabrent TV-FM (bttv version)",
+		.video_inputs	= 3,
+		.audio_inputs	= 1,
+		.tuner		= 0,
+		.svhs		= 2,
+		.gpiomask	= 0x108007,
+		.muxsel		= { 2, 3, 1, 1},
+		.audiomux	= { 100000, 100002, 100002, 100000},
+		.no_msp34xx	= 1,
+		.no_tda9875     = 1,
+		.no_tda7432     = 1,
+		.pll		= PLL_28,
+		.tuner_type	= TUNER_TNF_5335MF,
+		.tuner_addr	= ADDR_UNSET,
+		.has_radio      = 1,
+	},
 };
 
 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
@@ -3367,6 +3387,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		btv->has_remote=1;
 	if (!bttv_tvcards[btv->c.type].no_gpioirq)
 		btv->gpioirq=1;
+	if (bttv_tvcards[btv->c.type].any_irq)
+		btv->any_irq = 1;
 	if (bttv_tvcards[btv->c.type].audio_hook)
 		btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
 
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index 0005741d551..709099f03bd 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -3667,6 +3667,10 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs)
 	int handled = 0;
 
 	btv=(struct bttv *)dev_id;
+
+	if (btv->any_irq)
+		handled = bttv_any_irq(&btv->c);
+
 	count=0;
 	while (1) {
 		/* get/clear interrupt status bits */
diff --git a/drivers/media/video/bttv-gpio.c b/drivers/media/video/bttv-gpio.c
index 575ce8b8e71..616a5b7e510 100644
--- a/drivers/media/video/bttv-gpio.c
+++ b/drivers/media/video/bttv-gpio.c
@@ -113,6 +113,24 @@ void bttv_gpio_irq(struct bttv_core *core)
 	}
 }
 
+int bttv_any_irq(struct bttv_core *core)
+{
+	struct bttv_sub_driver *drv;
+	struct bttv_sub_device *dev;
+	struct list_head *item;
+	int handled = 0;
+
+	list_for_each(item,&core->subs) {
+		dev = list_entry(item,struct bttv_sub_device,list);
+		drv = to_bttv_sub_drv(dev->dev.driver);
+		if (drv && drv->any_irq) {
+			if (drv->any_irq(dev))
+				handled = 1;
+		}
+	}
+	return handled;
+}
+
 /* ----------------------------------------------------------------------- */
 /* external: sub-driver register/unregister                                */
 
diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bttv.h
index 124ea41dada..93298f06e01 100644
--- a/drivers/media/video/bttv.h
+++ b/drivers/media/video/bttv.h
@@ -162,6 +162,7 @@
 #define BTTV_BOARD_PV_M4900                0x8b
 #define BTTV_BOARD_OSPREY440               0x8c
 #define BTTV_BOARD_ASOUND_SKYEYE	   0x8d
+#define BTTV_BOARD_SABRENT_TVFM   	   0x8e
 
 /* i2c address list */
 #define I2C_TSA5522        0xc2
@@ -234,6 +235,7 @@ struct tvcard
 	unsigned int has_dvb:1;
 	unsigned int has_remote:1;
 	unsigned int no_gpioirq:1;
+	unsigned int any_irq:1;
 
 	/* other settings */
 	unsigned int pll;
@@ -333,6 +335,7 @@ struct bttv_sub_driver {
 	struct device_driver   drv;
 	char                   wanted[BUS_ID_SIZE];
 	void                   (*gpio_irq)(struct bttv_sub_device *sub);
+	int                    (*any_irq)(struct bttv_sub_device *sub);
 };
 #define to_bttv_sub_drv(x) container_of((x), struct bttv_sub_driver, drv)
 
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index 386f546f7d1..3aa9c6e4fc3 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -208,6 +208,7 @@ extern struct bus_type bttv_sub_bus_type;
 int bttv_sub_add_device(struct bttv_core *core, char *name);
 int bttv_sub_del_devices(struct bttv_core *core);
 void bttv_gpio_irq(struct bttv_core *core);
+int bttv_any_irq(struct bttv_core *core);
 
 
 /* ---------------------------------------------------------- */
@@ -273,6 +274,7 @@ struct bttv {
 	struct bttv_pll_info pll;
 	int triton1;
 	int gpioirq;
+	int any_irq;
 	int use_i2c_hw;
 
 	/* old gpio interface */
diff --git a/drivers/media/video/cx25840/Makefile b/drivers/media/video/cx25840/Makefile
new file mode 100644
index 00000000000..543ebacdc9d
--- /dev/null
+++ b/drivers/media/video/cx25840/Makefile
@@ -0,0 +1,6 @@
+cx25840-objs    := cx25840-core.o cx25840-audio.o cx25840-firmware.o \
+		   cx25840-vbi.o
+
+obj-$(CONFIG_VIDEO_DECODER) += cx25840.o
+
+EXTRA_CFLAGS += -I$(src)/..
diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c
new file mode 100644
index 00000000000..740908f8027
--- /dev/null
+++ b/drivers/media/video/cx25840/cx25840-audio.c
@@ -0,0 +1,368 @@
+/* cx25840 audio functions
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+#include <media/audiochip.h>
+#include <media/v4l2-common.h>
+
+#include "cx25840.h"
+
+inline static int set_audclk_freq(struct i2c_client *client,
+				 enum v4l2_audio_clock_freq freq)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+
+	/* assert soft reset */
+	cx25840_and_or(client, 0x810, ~0x1, 0x01);
+
+	/* common for all inputs and rates */
+	/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */
+	cx25840_write(client, 0x127, 0x50);
+
+	switch (state->audio_input) {
+	case AUDIO_TUNER:
+		switch (freq) {
+		case V4L2_AUDCLK_32_KHZ:
+			/* VID_PLL and AUX_PLL */
+			cx25840_write4(client, 0x108, 0x0f040610);
+
+			/* AUX_PLL_FRAC */
+			cx25840_write4(client, 0x110, 0xee39bb01);
+
+			/* src3/4/6_ctl = 0x0801f77f */
+			cx25840_write4(client, 0x900, 0x7ff70108);
+			cx25840_write4(client, 0x904, 0x7ff70108);
+			cx25840_write4(client, 0x90c, 0x7ff70108);
+			break;
+
+		case V4L2_AUDCLK_441_KHZ:
+			/* VID_PLL and AUX_PLL */
+			cx25840_write4(client, 0x108, 0x0f040910);
+
+			/* AUX_PLL_FRAC */
+			cx25840_write4(client, 0x110, 0xd66bec00);
+
+			/* src3/4/6_ctl = 0x08016d59 */
+			cx25840_write4(client, 0x900, 0x596d0108);
+			cx25840_write4(client, 0x904, 0x596d0108);
+			cx25840_write4(client, 0x90c, 0x596d0108);
+			break;
+
+		case V4L2_AUDCLK_48_KHZ:
+			/* VID_PLL and AUX_PLL */
+			cx25840_write4(client, 0x108, 0x0f040a10);
+
+			/* AUX_PLL_FRAC */
+			cx25840_write4(client, 0x110, 0xe5d69800);
+
+			/* src3/4/6_ctl = 0x08014faa */
+			cx25840_write4(client, 0x900, 0xaa4f0108);
+			cx25840_write4(client, 0x904, 0xaa4f0108);
+			cx25840_write4(client, 0x90c, 0xaa4f0108);
+			break;
+		}
+		break;
+
+	case AUDIO_EXTERN_1:
+	case AUDIO_EXTERN_2:
+	case AUDIO_INTERN:
+	case AUDIO_RADIO:
+		switch (freq) {
+		case V4L2_AUDCLK_32_KHZ:
+			/* VID_PLL and AUX_PLL */
+			cx25840_write4(client, 0x108, 0x0f04081e);
+
+			/* AUX_PLL_FRAC */
+			cx25840_write4(client, 0x110, 0x69082a01);
+
+			/* src1_ctl = 0x08010000 */
+			cx25840_write4(client, 0x8f8, 0x00000108);
+
+			/* src3/4/6_ctl = 0x08020000 */
+			cx25840_write4(client, 0x900, 0x00000208);
+			cx25840_write4(client, 0x904, 0x00000208);
+			cx25840_write4(client, 0x90c, 0x00000208);
+
+			/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
+			cx25840_write(client, 0x127, 0x54);
+			break;
+
+		case V4L2_AUDCLK_441_KHZ:
+			/* VID_PLL and AUX_PLL */
+			cx25840_write4(client, 0x108, 0x0f040918);
+
+			/* AUX_PLL_FRAC */
+			cx25840_write4(client, 0x110, 0xd66bec00);
+
+			/* src1_ctl = 0x08010000 */
+			cx25840_write4(client, 0x8f8, 0xcd600108);
+
+			/* src3/4/6_ctl = 0x08020000 */
+			cx25840_write4(client, 0x900, 0x85730108);
+			cx25840_write4(client, 0x904, 0x85730108);
+			cx25840_write4(client, 0x90c, 0x85730108);
+			break;
+
+		case V4L2_AUDCLK_48_KHZ:
+			/* VID_PLL and AUX_PLL */
+			cx25840_write4(client, 0x108, 0x0f040a18);
+
+			/* AUX_PLL_FRAC */
+			cx25840_write4(client, 0x110, 0xe5d69800);
+
+			/* src1_ctl = 0x08010000 */
+			cx25840_write4(client, 0x8f8, 0x00800108);
+
+			/* src3/4/6_ctl = 0x08020000 */
+			cx25840_write4(client, 0x900, 0x55550108);
+			cx25840_write4(client, 0x904, 0x55550108);
+			cx25840_write4(client, 0x90c, 0x55550108);
+			break;
+		}
+		break;
+	}
+
+	/* deassert soft reset */
+	cx25840_and_or(client, 0x810, ~0x1, 0x00);
+
+	state->audclk_freq = freq;
+
+	return 0;
+}
+
+static int set_input(struct i2c_client *client, int audio_input)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+
+	cx25840_dbg("set audio input (%d)\n", audio_input);
+
+	/* stop microcontroller */
+	cx25840_and_or(client, 0x803, ~0x10, 0);
+
+	/* Mute everything to prevent the PFFT! */
+	cx25840_write(client, 0x8d3, 0x1f);
+
+	switch (audio_input) {
+	case AUDIO_TUNER:
+		/* Set Path1 to Analog Demod Main Channel */
+		cx25840_write4(client, 0x8d0, 0x7038061f);
+
+		/* When the microcontroller detects the
+		 * audio format, it will unmute the lines */
+		cx25840_and_or(client, 0x803, ~0x10, 0x10);
+		break;
+
+	case AUDIO_EXTERN_1:
+	case AUDIO_EXTERN_2:
+	case AUDIO_INTERN:
+	case AUDIO_RADIO:
+		/* Set Path1 to Serial Audio Input */
+		cx25840_write4(client, 0x8d0, 0x12100101);
+
+		/* The microcontroller should not be started for the
+		 * non-tuner inputs: autodetection is specific for
+		 * TV audio. */
+		break;
+
+	default:
+		cx25840_dbg("Invalid audio input selection %d\n", audio_input);
+		return -EINVAL;
+	}
+
+	state->audio_input = audio_input;
+
+	return set_audclk_freq(client, state->audclk_freq);
+}
+
+inline static int get_volume(struct i2c_client *client)
+{
+	/* Volume runs +18dB to -96dB in 1/2dB steps
+	 * change to fit the msp3400 -114dB to +12dB range */
+
+	/* check PATH1_VOLUME */
+	int vol = 228 - cx25840_read(client, 0x8d4);
+	vol = (vol / 2) + 23;
+	return vol << 9;
+}
+
+inline static void set_volume(struct i2c_client *client, int volume)
+{
+	/* First convert the volume to msp3400 values (0-127) */
+	int vol = volume >> 9;
+	/* now scale it up to cx25840 values
+	 * -114dB to -96dB maps to 0
+	 * this should be 19, but in my testing that was 4dB too loud */
+	if (vol <= 23) {
+		vol = 0;
+	} else {
+		vol -= 23;
+	}
+
+	/* PATH1_VOLUME */
+	cx25840_write(client, 0x8d4, 228 - (vol * 2));
+}
+
+inline static int get_bass(struct i2c_client *client)
+{
+	/* bass is 49 steps +12dB to -12dB */
+
+	/* check PATH1_EQ_BASS_VOL */
+	int bass = cx25840_read(client, 0x8d9) & 0x3f;
+	bass = (((48 - bass) * 0xffff) + 47) / 48;
+	return bass;
+}
+
+inline static void set_bass(struct i2c_client *client, int bass)
+{
+	/* PATH1_EQ_BASS_VOL */
+	cx25840_and_or(client, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff));
+}
+
+inline static int get_treble(struct i2c_client *client)
+{
+	/* treble is 49 steps +12dB to -12dB */
+
+	/* check PATH1_EQ_TREBLE_VOL */
+	int treble = cx25840_read(client, 0x8db) & 0x3f;
+	treble = (((48 - treble) * 0xffff) + 47) / 48;
+	return treble;
+}
+
+inline static void set_treble(struct i2c_client *client, int treble)
+{
+	/* PATH1_EQ_TREBLE_VOL */
+	cx25840_and_or(client, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff));
+}
+
+inline static int get_balance(struct i2c_client *client)
+{
+	/* balance is 7 bit, 0 to -96dB */
+
+	/* check PATH1_BAL_LEVEL */
+	int balance = cx25840_read(client, 0x8d5) & 0x7f;
+	/* check PATH1_BAL_LEFT */
+	if ((cx25840_read(client, 0x8d5) & 0x80) == 0)
+		balance = 0x80 - balance;
+	else
+		balance = 0x80 + balance;
+	return balance << 8;
+}
+
+inline static void set_balance(struct i2c_client *client, int balance)
+{
+	int bal = balance >> 8;
+	if (bal > 0x80) {
+		/* PATH1_BAL_LEFT */
+		cx25840_and_or(client, 0x8d5, 0x7f, 0x80);
+		/* PATH1_BAL_LEVEL */
+		cx25840_and_or(client, 0x8d5, ~0x7f, bal & 0x7f);
+	} else {
+		/* PATH1_BAL_LEFT */
+		cx25840_and_or(client, 0x8d5, 0x7f, 0x00);
+		/* PATH1_BAL_LEVEL */
+		cx25840_and_or(client, 0x8d5, ~0x7f, 0x80 - bal);
+	}
+}
+
+inline static int get_mute(struct i2c_client *client)
+{
+	/* check SRC1_MUTE_EN */
+	return cx25840_read(client, 0x8d3) & 0x2 ? 1 : 0;
+}
+
+inline static void set_mute(struct i2c_client *client, int mute)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+
+	if (state->audio_input == AUDIO_TUNER) {
+		/* Must turn off microcontroller in order to mute sound.
+		 * Not sure if this is the best method, but it does work.
+		 * If the microcontroller is running, then it will undo any
+		 * changes to the mute register. */
+		if (mute) {
+			/* disable microcontroller */
+			cx25840_and_or(client, 0x803, ~0x10, 0x00);
+			cx25840_write(client, 0x8d3, 0x1f);
+		} else {
+			/* enable microcontroller */
+			cx25840_and_or(client, 0x803, ~0x10, 0x10);
+		}
+	} else {
+		/* SRC1_MUTE_EN */
+		cx25840_and_or(client, 0x8d3, ~0x2, mute ? 0x02 : 0x00);
+	}
+}
+
+int cx25840_audio(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	struct v4l2_control *ctrl = arg;
+
+	switch (cmd) {
+	case AUDC_SET_INPUT:
+		return set_input(client, *(int *)arg);
+	case VIDIOC_INT_AUDIO_CLOCK_FREQ:
+		return set_audclk_freq(client, *(enum v4l2_audio_clock_freq *)arg);
+	case VIDIOC_G_CTRL:
+		switch (ctrl->id) {
+		case V4L2_CID_AUDIO_VOLUME:
+			ctrl->value = get_volume(client);
+			break;
+		case V4L2_CID_AUDIO_BASS:
+			ctrl->value = get_bass(client);
+			break;
+		case V4L2_CID_AUDIO_TREBLE:
+			ctrl->value = get_treble(client);
+			break;
+		case V4L2_CID_AUDIO_BALANCE:
+			ctrl->value = get_balance(client);
+			break;
+		case V4L2_CID_AUDIO_MUTE:
+			ctrl->value = get_mute(client);
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case VIDIOC_S_CTRL:
+		switch (ctrl->id) {
+		case V4L2_CID_AUDIO_VOLUME:
+			set_volume(client, ctrl->value);
+			break;
+		case V4L2_CID_AUDIO_BASS:
+			set_bass(client, ctrl->value);
+			break;
+		case V4L2_CID_AUDIO_TREBLE:
+			set_treble(client, ctrl->value);
+			break;
+		case V4L2_CID_AUDIO_BALANCE:
+			set_balance(client, ctrl->value);
+			break;
+		case V4L2_CID_AUDIO_MUTE:
+			set_mute(client, ctrl->value);
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
new file mode 100644
index 00000000000..f6afeec499c
--- /dev/null
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -0,0 +1,1020 @@
+/* cx25840 - Conexant CX25840 audio/video decoder driver
+ *
+ * Copyright (C) 2004 Ulf Eklund
+ *
+ * Based on the saa7115 driver and on the first verison of Chris Kennedy's
+ * cx25840 driver.
+ *
+ * Changes by Tyler Trafford <tatrafford@comcast.net>
+ *    - cleanup/rewrite for V4L2 API (2005)
+ *
+ * VBI support by Hans Verkuil <hverkuil@xs4all.nl>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+#include <media/audiochip.h>
+#include <media/v4l2-common.h>
+
+#include "cx25840.h"
+
+MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver");
+MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford");
+MODULE_LICENSE("GPL");
+
+static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
+
+
+int cx25840_debug = 0;
+
+module_param(cx25840_debug, bool, 0644);
+
+MODULE_PARM_DESC(cx25840_debug, "Debugging messages [0=Off (default) 1=On]");
+
+I2C_CLIENT_INSMOD;
+
+/* ----------------------------------------------------------------------- */
+
+int cx25840_write(struct i2c_client *client, u16 addr, u8 value)
+{
+	u8 buffer[3];
+	buffer[0] = addr >> 8;
+	buffer[1] = addr & 0xff;
+	buffer[2] = value;
+	return i2c_master_send(client, buffer, 3);
+}
+
+int cx25840_write4(struct i2c_client *client, u16 addr, u32 value)
+{
+	u8 buffer[6];
+	buffer[0] = addr >> 8;
+	buffer[1] = addr & 0xff;
+	buffer[2] = value >> 24;
+	buffer[3] = (value >> 16) & 0xff;
+	buffer[4] = (value >> 8) & 0xff;
+	buffer[5] = value & 0xff;
+	return i2c_master_send(client, buffer, 6);
+}
+
+u8 cx25840_read(struct i2c_client * client, u16 addr)
+{
+	u8 buffer[2];
+	buffer[0] = addr >> 8;
+	buffer[1] = addr & 0xff;
+
+	if (i2c_master_send(client, buffer, 2) < 2)
+		return 0;
+
+	if (i2c_master_recv(client, buffer, 1) < 1)
+		return 0;
+
+	return buffer[0];
+}
+
+u32 cx25840_read4(struct i2c_client * client, u16 addr)
+{
+	u8 buffer[4];
+	buffer[0] = addr >> 8;
+	buffer[1] = addr & 0xff;
+
+	if (i2c_master_send(client, buffer, 2) < 2)
+		return 0;
+
+	if (i2c_master_recv(client, buffer, 4) < 4)
+		return 0;
+
+	return (buffer[0] << 24) | (buffer[1] << 16) |
+	    (buffer[2] << 8) | buffer[3];
+}
+
+int cx25840_and_or(struct i2c_client *client, u16 addr, u8 and_mask,
+		   u8 or_value)
+{
+	return cx25840_write(client, addr,
+			     (cx25840_read(client, addr) & and_mask) |
+			     or_value);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int set_input(struct i2c_client *, enum cx25840_input);
+static void input_change(struct i2c_client *);
+static void log_status(struct i2c_client *client);
+
+/* ----------------------------------------------------------------------- */
+
+static inline void init_dll1(struct i2c_client *client)
+{
+	/* This is the Hauppauge sequence used to
+	 * initialize the Delay Lock Loop 1 (ADC DLL). */
+	cx25840_write(client, 0x159, 0x23);
+	cx25840_write(client, 0x15a, 0x87);
+	cx25840_write(client, 0x15b, 0x06);
+	cx25840_write(client, 0x159, 0xe1);
+	cx25840_write(client, 0x15a, 0x86);
+	cx25840_write(client, 0x159, 0xe0);
+	cx25840_write(client, 0x159, 0xe1);
+	cx25840_write(client, 0x15b, 0x10);
+}
+
+static inline void init_dll2(struct i2c_client *client)
+{
+	/* This is the Hauppauge sequence used to
+	 * initialize the Delay Lock Loop 2 (ADC DLL). */
+	cx25840_write(client, 0x15d, 0xe3);
+	cx25840_write(client, 0x15e, 0x86);
+	cx25840_write(client, 0x15f, 0x06);
+	cx25840_write(client, 0x15d, 0xe1);
+	cx25840_write(client, 0x15d, 0xe0);
+	cx25840_write(client, 0x15d, 0xe1);
+}
+
+static void cx25840_initialize(struct i2c_client *client, int loadfw)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+
+	/* datasheet startup in numbered steps, refer to page 3-77 */
+	/* 2. */
+	cx25840_and_or(client, 0x803, ~0x10, 0x00);
+	/* The default of this register should be 4, but I get 0 instead.
+	 * Set this register to 4 manually. */
+	cx25840_write(client, 0x000, 0x04);
+	/* 3. */
+	init_dll1(client);
+	init_dll2(client);
+	cx25840_write(client, 0x136, 0x0a);
+	/* 4. */
+	cx25840_write(client, 0x13c, 0x01);
+	cx25840_write(client, 0x13c, 0x00);
+	/* 5. */
+	if (loadfw)
+		cx25840_loadfw(client);
+	/* 6. */
+	cx25840_write(client, 0x115, 0x8c);
+	cx25840_write(client, 0x116, 0x07);
+	cx25840_write(client, 0x118, 0x02);
+	/* 7. */
+	cx25840_write(client, 0x4a5, 0x80);
+	cx25840_write(client, 0x4a5, 0x00);
+	cx25840_write(client, 0x402, 0x00);
+	/* 8. */
+	cx25840_write(client, 0x401, 0x18);
+	cx25840_write(client, 0x4a2, 0x10);
+	cx25840_write(client, 0x402, 0x04);
+	/* 10. */
+	cx25840_write(client, 0x8d3, 0x1f);
+	cx25840_write(client, 0x8e3, 0x03);
+
+	cx25840_vbi_setup(client);
+
+	/* trial and error says these are needed to get audio */
+	cx25840_write(client, 0x914, 0xa0);
+	cx25840_write(client, 0x918, 0xa0);
+	cx25840_write(client, 0x919, 0x01);
+
+	/* stereo prefered */
+	cx25840_write(client, 0x809, 0x04);
+	/* AC97 shift */
+	cx25840_write(client, 0x8cf, 0x0f);
+
+	/* (re)set video input */
+	set_input(client, state->input);
+	/* (re)set audio input */
+	cx25840_audio(client, AUDC_SET_INPUT, &state->audio_input);
+
+	/* start microcontroller */
+	cx25840_and_or(client, 0x803, ~0x10, 0x10);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void input_change(struct i2c_client *client)
+{
+	v4l2_std_id std = cx25840_get_v4lstd(client);
+
+	if (std & V4L2_STD_PAL) {
+		/* Follow tuner change procedure for PAL */
+		cx25840_write(client, 0x808, 0xff);
+		cx25840_write(client, 0x80b, 0x10);
+	} else if (std & V4L2_STD_SECAM) {
+		/* Select autodetect for SECAM */
+		cx25840_write(client, 0x808, 0xff);
+		cx25840_write(client, 0x80b, 0x10);
+	} else if (std & V4L2_STD_NTSC) {
+		/* NTSC */
+		cx25840_write(client, 0x808, 0xf6);
+		cx25840_write(client, 0x80b, 0x00);
+	}
+
+	if (cx25840_read(client, 0x803) & 0x10) {
+		/* restart audio decoder microcontroller */
+		cx25840_and_or(client, 0x803, ~0x10, 0x00);
+		cx25840_and_or(client, 0x803, ~0x10, 0x10);
+	}
+}
+
+static int set_input(struct i2c_client *client, enum cx25840_input input)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+
+	cx25840_dbg("decoder set input (%d)\n", input);
+
+	switch (input) {
+	case CX25840_TUNER:
+		cx25840_dbg("now setting Tuner input\n");
+
+		if (state->cardtype == CARDTYPE_PVR150) {
+			/* CH_SEL_ADC2=1 */
+			cx25840_and_or(client, 0x102, ~0x2, 0x02);
+		}
+
+		/* Video Input Control */
+		if (state->cardtype == CARDTYPE_PG600) {
+			cx25840_write(client, 0x103, 0x11);
+		} else {
+			cx25840_write(client, 0x103, 0x46);
+		}
+
+		/* INPUT_MODE=0 */
+		cx25840_and_or(client, 0x401, ~0x6, 0x00);
+		break;
+
+	case CX25840_COMPOSITE0:
+	case CX25840_COMPOSITE1:
+		cx25840_dbg("now setting Composite input\n");
+
+		/* Video Input Control */
+		if (state->cardtype == CARDTYPE_PG600) {
+			cx25840_write(client, 0x103, 0x00);
+		} else {
+			cx25840_write(client, 0x103, 0x02);
+		}
+
+		/* INPUT_MODE=0 */
+		cx25840_and_or(client, 0x401, ~0x6, 0x00);
+		break;
+
+	case CX25840_SVIDEO0:
+	case CX25840_SVIDEO1:
+		cx25840_dbg("now setting S-Video input\n");
+
+		/* CH_SEL_ADC2=0 */
+		cx25840_and_or(client, 0x102, ~0x2, 0x00);
+
+		/* Video Input Control */
+		if (state->cardtype == CARDTYPE_PG600) {
+			cx25840_write(client, 0x103, 0x02);
+		} else {
+			cx25840_write(client, 0x103, 0x10);
+		}
+
+		/* INPUT_MODE=1 */
+		cx25840_and_or(client, 0x401, ~0x6, 0x02);
+		break;
+
+	default:
+		cx25840_err("%d is not a valid input!\n", input);
+		return -EINVAL;
+	}
+
+	state->input = input;
+	input_change(client);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
+{
+	u8 fmt;
+
+	switch (std) {
+	/* zero is autodetect */
+	case 0: fmt = 0x0; break;
+	/* default ntsc to ntsc-m */
+	case V4L2_STD_NTSC:
+	case V4L2_STD_NTSC_M: fmt = 0x1; break;
+	case V4L2_STD_NTSC_M_JP: fmt = 0x2; break;
+	case V4L2_STD_NTSC_443: fmt = 0x3; break;
+	case V4L2_STD_PAL: fmt = 0x4; break;
+	case V4L2_STD_PAL_M: fmt = 0x5; break;
+	case V4L2_STD_PAL_N: fmt = 0x6; break;
+	case V4L2_STD_PAL_Nc: fmt = 0x7; break;
+	case V4L2_STD_PAL_60: fmt = 0x8; break;
+	case V4L2_STD_SECAM: fmt = 0xc; break;
+	default:
+		return -ERANGE;
+	}
+
+	cx25840_and_or(client, 0x400, ~0xf, fmt);
+	cx25840_vbi_setup(client);
+	return 0;
+}
+
+v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client)
+{
+	/* check VID_FMT_SEL first */
+	u8 fmt = cx25840_read(client, 0x400) & 0xf;
+
+	if (!fmt) {
+		/* check AFD_FMT_STAT if set to autodetect */
+		fmt = cx25840_read(client, 0x40d) & 0xf;
+	}
+
+	switch (fmt) {
+	case 0x1: return V4L2_STD_NTSC_M;
+	case 0x2: return V4L2_STD_NTSC_M_JP;
+	case 0x3: return V4L2_STD_NTSC_443;
+	case 0x4: return V4L2_STD_PAL;
+	case 0x5: return V4L2_STD_PAL_M;
+	case 0x6: return V4L2_STD_PAL_N;
+	case 0x7: return V4L2_STD_PAL_Nc;
+	case 0x8: return V4L2_STD_PAL_60;
+	case 0xc: return V4L2_STD_SECAM;
+	default: return V4L2_STD_UNKNOWN;
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+
+	switch (ctrl->id) {
+	case CX25840_CID_CARDTYPE:
+		switch (ctrl->value) {
+		case CARDTYPE_PVR150:
+		case CARDTYPE_PG600:
+			state->cardtype = ctrl->value;
+			break;
+		default:
+			return -ERANGE;
+		}
+
+		set_input(client, state->input);
+		break;
+
+	case V4L2_CID_BRIGHTNESS:
+		if (ctrl->value < 0 || ctrl->value > 255) {
+			cx25840_err("invalid brightness setting %d\n",
+				    ctrl->value);
+			return -ERANGE;
+		}
+
+		cx25840_write(client, 0x414, ctrl->value - 128);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		if (ctrl->value < 0 || ctrl->value > 127) {
+			cx25840_err("invalid contrast setting %d\n",
+				    ctrl->value);
+			return -ERANGE;
+		}
+
+		cx25840_write(client, 0x415, ctrl->value << 1);
+		break;
+
+	case V4L2_CID_SATURATION:
+		if (ctrl->value < 0 || ctrl->value > 127) {
+			cx25840_err("invalid saturation setting %d\n",
+				    ctrl->value);
+			return -ERANGE;
+		}
+
+		cx25840_write(client, 0x420, ctrl->value << 1);
+		cx25840_write(client, 0x421, ctrl->value << 1);
+		break;
+
+	case V4L2_CID_HUE:
+		if (ctrl->value < -127 || ctrl->value > 127) {
+			cx25840_err("invalid hue setting %d\n", ctrl->value);
+			return -ERANGE;
+		}
+
+		cx25840_write(client, 0x422, ctrl->value);
+		break;
+
+	case V4L2_CID_AUDIO_VOLUME:
+	case V4L2_CID_AUDIO_BASS:
+	case V4L2_CID_AUDIO_TREBLE:
+	case V4L2_CID_AUDIO_BALANCE:
+	case V4L2_CID_AUDIO_MUTE:
+		return cx25840_audio(client, VIDIOC_S_CTRL, ctrl);
+	}
+
+	return 0;
+}
+
+static int get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+
+	switch (ctrl->id) {
+	case CX25840_CID_CARDTYPE:
+		ctrl->value = state->cardtype;
+		break;
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = cx25840_read(client, 0x414) + 128;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = cx25840_read(client, 0x415) >> 1;
+		break;
+	case V4L2_CID_SATURATION:
+		ctrl->value = cx25840_read(client, 0x420) >> 1;
+		break;
+	case V4L2_CID_HUE:
+		ctrl->value = cx25840_read(client, 0x422);
+		break;
+	case V4L2_CID_AUDIO_VOLUME:
+	case V4L2_CID_AUDIO_BASS:
+	case V4L2_CID_AUDIO_TREBLE:
+	case V4L2_CID_AUDIO_BALANCE:
+	case V4L2_CID_AUDIO_MUTE:
+		return cx25840_audio(client, VIDIOC_G_CTRL, ctrl);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
+{
+	switch (fmt->type) {
+	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+		return cx25840_vbi(client, VIDIOC_G_FMT, fmt);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix;
+	int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
+	int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_NTSC);
+
+	switch (fmt->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		pix = &(fmt->fmt.pix);
+
+		Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+		Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+
+		Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+		Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+
+		Vlines = pix->height + (is_pal ? 4 : 7);
+
+		if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
+		    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+			cx25840_err("%dx%d is not a valid size!\n",
+				    pix->width, pix->height);
+			return -ERANGE;
+		}
+
+		HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20);
+		VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+		VSC &= 0x1fff;
+
+		if (pix->width >= 385)
+			filter = 0;
+		else if (pix->width > 192)
+			filter = 1;
+		else if (pix->width > 96)
+			filter = 2;
+		else
+			filter = 3;
+
+		cx25840_dbg("decoder set size %dx%d -> scale  %ux%u\n",
+			    pix->width, pix->height, HSC, VSC);
+
+		/* HSCALE=HSC */
+		cx25840_write(client, 0x418, HSC & 0xff);
+		cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
+		cx25840_write(client, 0x41a, HSC >> 16);
+		/* VSCALE=VSC */
+		cx25840_write(client, 0x41c, VSC & 0xff);
+		cx25840_write(client, 0x41d, VSC >> 8);
+		/* VS_INTRLACE=1 VFILT=filter */
+		cx25840_write(client, 0x41e, 0x8 | filter);
+		break;
+
+	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+		return cx25840_vbi(client, VIDIOC_S_FMT, fmt);
+
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		return cx25840_vbi(client, VIDIOC_S_FMT, fmt);
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int cx25840_command(struct i2c_client *client, unsigned int cmd,
+			   void *arg)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+	struct v4l2_tuner *vt = arg;
+	int result = 0;
+
+	switch (cmd) {
+	case 0:
+		break;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	/* ioctls to allow direct access to the
+	 * cx25840 registers for testing */
+	case VIDIOC_INT_G_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_CX25840)
+			return -EINVAL;
+		reg->val = cx25840_read(client, reg->reg & 0x0fff);
+		break;
+	}
+
+	case VIDIOC_INT_S_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_CX25840)
+			return -EINVAL;
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		cx25840_write(client, reg->reg & 0x0fff, reg->val & 0xff);
+		break;
+	}
+#endif
+
+	case VIDIOC_INT_DECODE_VBI_LINE:
+		return cx25840_vbi(client, cmd, arg);
+
+	case VIDIOC_INT_AUDIO_CLOCK_FREQ:
+	case AUDC_SET_INPUT:
+		result = cx25840_audio(client, cmd, arg);
+		break;
+
+	case VIDIOC_STREAMON:
+		cx25840_dbg("enable output\n");
+		cx25840_write(client, 0x115, 0x8c);
+		cx25840_write(client, 0x116, 0x07);
+		break;
+
+	case VIDIOC_STREAMOFF:
+		cx25840_dbg("disable output\n");
+		cx25840_write(client, 0x115, 0x00);
+		cx25840_write(client, 0x116, 0x00);
+		break;
+
+	case VIDIOC_LOG_STATUS:
+		log_status(client);
+		break;
+
+	case VIDIOC_G_CTRL:
+		result = get_v4lctrl(client, (struct v4l2_control *)arg);
+		break;
+
+	case VIDIOC_S_CTRL:
+		result = set_v4lctrl(client, (struct v4l2_control *)arg);
+		break;
+
+	case VIDIOC_G_STD:
+		*(v4l2_std_id *)arg = cx25840_get_v4lstd(client);
+		break;
+
+	case VIDIOC_S_STD:
+		result = set_v4lstd(client, *(v4l2_std_id *)arg);
+		break;
+
+	case VIDIOC_G_INPUT:
+		*(int *)arg = state->input;
+		break;
+
+	case VIDIOC_S_INPUT:
+		result = set_input(client, *(int *)arg);
+		break;
+
+	case VIDIOC_S_FREQUENCY:
+		input_change(client);
+		break;
+
+	case VIDIOC_G_TUNER:
+	{
+		u8 mode = cx25840_read(client, 0x804);
+		u8 pref = cx25840_read(client, 0x809) & 0xf;
+		u8 vpres = cx25840_read(client, 0x80a) & 0x10;
+		int val = 0;
+
+		vt->capability |=
+		    V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
+		    V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
+
+		vt->signal = vpres ? 0xffff : 0x0;
+
+		/* get rxsubchans and audmode */
+		if ((mode & 0xf) == 1)
+			val |= V4L2_TUNER_SUB_STEREO;
+		else
+			val |= V4L2_TUNER_SUB_MONO;
+
+		if (mode == 2 || mode == 4)
+			val |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+
+		if (mode & 0x10)
+			val |= V4L2_TUNER_SUB_SAP;
+
+		vt->rxsubchans = val;
+
+		switch (pref) {
+		case 0:
+			vt->audmode = V4L2_TUNER_MODE_MONO;
+			break;
+		case 1:
+		case 2:
+			vt->audmode = V4L2_TUNER_MODE_LANG2;
+			break;
+		case 4:
+		default:
+			vt->audmode = V4L2_TUNER_MODE_STEREO;
+		}
+		break;
+	}
+
+	case VIDIOC_S_TUNER:
+		switch (vt->audmode) {
+		case V4L2_TUNER_MODE_MONO:
+		case V4L2_TUNER_MODE_LANG1:
+			/* Force PREF_MODE to MONO */
+			cx25840_and_or(client, 0x809, ~0xf, 0x00);
+			break;
+		case V4L2_TUNER_MODE_STEREO:
+			/* Force PREF_MODE to STEREO */
+			cx25840_and_or(client, 0x809, ~0xf, 0x04);
+			break;
+		case V4L2_TUNER_MODE_LANG2:
+			/* Force PREF_MODE to LANG2 */
+			cx25840_and_or(client, 0x809, ~0xf, 0x01);
+			break;
+		}
+		break;
+
+	case VIDIOC_G_FMT:
+		result = get_v4lfmt(client, (struct v4l2_format *)arg);
+		break;
+
+	case VIDIOC_S_FMT:
+		result = set_v4lfmt(client, (struct v4l2_format *)arg);
+		break;
+
+	case VIDIOC_INT_RESET:
+		cx25840_initialize(client, 0);
+		break;
+
+	case VIDIOC_INT_G_CHIP_IDENT:
+		*(enum v4l2_chip_ident *)arg =
+			V4L2_IDENT_CX25840 + ((cx25840_read(client, 0x100) >> 4) & 0xf);
+		break;
+
+	default:
+		cx25840_err("invalid ioctl %x\n", cmd);
+		return -EINVAL;
+	}
+
+	return result;
+}
+
+/* ----------------------------------------------------------------------- */
+
+struct i2c_driver i2c_driver_cx25840;
+
+static int cx25840_detect_client(struct i2c_adapter *adapter, int address,
+				 int kind)
+{
+	struct i2c_client *client;
+	struct cx25840_state *state;
+	u16 device_id;
+
+	/* Check if the adapter supports the needed features
+	 * Not until kernel version 2.6.11 did the bit-algo
+	 * correctly report that it would do an I2C-level xfer */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+		return 0;
+
+	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (client == 0)
+		return -ENOMEM;
+
+	memset(client, 0, sizeof(struct i2c_client));
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &i2c_driver_cx25840;
+	client->flags = I2C_CLIENT_ALLOW_USE;
+	snprintf(client->name, sizeof(client->name) - 1, "cx25840");
+
+	cx25840_dbg("detecting cx25840 client on address 0x%x\n", address << 1);
+
+	device_id = cx25840_read(client, 0x101) << 8;
+	device_id |= cx25840_read(client, 0x100);
+
+	/* The high byte of the device ID should be
+	 * 0x84 if chip is present */
+	if ((device_id & 0xff00) != 0x8400) {
+		cx25840_dbg("cx25840 not found\n");
+		kfree(client);
+		return 0;
+	}
+
+	cx25840_info("cx25%3x-2%x found @ 0x%x (%s)\n",
+		    (device_id & 0xfff0) >> 4,
+		    (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1 : 3,
+		    address << 1, adapter->name);
+
+	state = kmalloc(sizeof(struct cx25840_state), GFP_KERNEL);
+	if (state == NULL) {
+		kfree(client);
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(client, state);
+	memset(state, 0, sizeof(struct cx25840_state));
+	state->input = CX25840_TUNER;
+	state->audclk_freq = V4L2_AUDCLK_48_KHZ;
+	state->audio_input = AUDIO_TUNER;
+	state->cardtype = CARDTYPE_PVR150;
+
+	cx25840_initialize(client, 1);
+
+	i2c_attach_client(client);
+
+	return 0;
+}
+
+static int cx25840_attach_adapter(struct i2c_adapter *adapter)
+{
+#ifdef I2C_CLASS_TV_ANALOG
+	if (adapter->class & I2C_CLASS_TV_ANALOG)
+#else
+	if (adapter->id == I2C_HW_B_BT848)
+#endif
+		return i2c_probe(adapter, &addr_data, &cx25840_detect_client);
+	return 0;
+}
+
+static int cx25840_detach_client(struct i2c_client *client)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+	int err;
+
+	err = i2c_detach_client(client);
+	if (err) {
+		return err;
+	}
+
+	kfree(state);
+	kfree(client);
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+struct i2c_driver i2c_driver_cx25840 = {
+	.name = "cx25840",
+
+	.id = I2C_DRIVERID_CX25840,
+	.flags = I2C_DF_NOTIFY,
+
+	.attach_adapter = cx25840_attach_adapter,
+	.detach_client = cx25840_detach_client,
+	.command = cx25840_command,
+	.owner = THIS_MODULE,
+};
+
+
+static int __init m__init(void)
+{
+	return i2c_add_driver(&i2c_driver_cx25840);
+}
+
+static void __exit m__exit(void)
+{
+	i2c_del_driver(&i2c_driver_cx25840);
+}
+
+module_init(m__init);
+module_exit(m__exit);
+
+/* ----------------------------------------------------------------------- */
+
+static void log_status(struct i2c_client *client)
+{
+	static const char *const fmt_strs[] = {
+		"0x0",
+		"NTSC-M", "NTSC-J", "NTSC-4.43",
+		"PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60",
+		"0x9", "0xA", "0xB",
+		"SECAM",
+		"0xD", "0xE", "0xF"
+	};
+
+	struct cx25840_state *state = i2c_get_clientdata(client);
+	u8 microctrl_vidfmt = cx25840_read(client, 0x80a);
+	u8 vidfmt_sel = cx25840_read(client, 0x400) & 0xf;
+	u8 gen_stat1 = cx25840_read(client, 0x40d);
+	u8 download_ctl = cx25840_read(client, 0x803);
+	u8 mod_det_stat0 = cx25840_read(client, 0x804);
+	u8 mod_det_stat1 = cx25840_read(client, 0x805);
+	u8 audio_config = cx25840_read(client, 0x808);
+	u8 pref_mode = cx25840_read(client, 0x809);
+	u8 afc0 = cx25840_read(client, 0x80b);
+	u8 mute_ctl = cx25840_read(client, 0x8d3);
+	char *p;
+
+	cx25840_info("Video signal:              %spresent\n",
+		    (microctrl_vidfmt & 0x10) ? "" : "not ");
+	cx25840_info("Detected format:           %s\n",
+		    fmt_strs[gen_stat1 & 0xf]);
+
+	switch (mod_det_stat0) {
+	case 0x00: p = "mono"; break;
+	case 0x01: p = "stereo"; break;
+	case 0x02: p = "dual"; break;
+	case 0x04: p = "tri"; break;
+	case 0x10: p = "mono with SAP"; break;
+	case 0x11: p = "stereo with SAP"; break;
+	case 0x12: p = "dual with SAP"; break;
+	case 0x14: p = "tri with SAP"; break;
+	case 0xfe: p = "forced mode"; break;
+	default: p = "not defined";
+	}
+	cx25840_info("Detected audio mode:       %s\n", p);
+
+	switch (mod_det_stat1) {
+	case 0x00: p = "not defined"; break;
+	case 0x01: p = "EIAJ"; break;
+	case 0x02: p = "A2-M"; break;
+	case 0x03: p = "A2-BG"; break;
+	case 0x04: p = "A2-DK1"; break;
+	case 0x05: p = "A2-DK2"; break;
+	case 0x06: p = "A2-DK3"; break;
+	case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
+	case 0x08: p = "AM-L"; break;
+	case 0x09: p = "NICAM-BG"; break;
+	case 0x0a: p = "NICAM-DK"; break;
+	case 0x0b: p = "NICAM-I"; break;
+	case 0x0c: p = "NICAM-L"; break;
+	case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
+	case 0x0e: p = "IF FM Radio"; break;
+	case 0x0f: p = "BTSC"; break;
+	case 0x10: p = "high-deviation FM"; break;
+	case 0x11: p = "very high-deviation FM"; break;
+	case 0xfd: p = "unknown audio standard"; break;
+	case 0xfe: p = "forced audio standard"; break;
+	case 0xff: p = "no detected audio standard"; break;
+	default: p = "not defined";
+	}
+	cx25840_info("Detected audio standard:   %s\n", p);
+	cx25840_info("Audio muted:               %s\n",
+		    (mute_ctl & 0x2) ? "yes" : "no");
+	cx25840_info("Audio microcontroller:     %s\n",
+		    (download_ctl & 0x10) ? "running" : "stopped");
+
+	switch (audio_config >> 4) {
+	case 0x00: p = "undefined"; break;
+	case 0x01: p = "BTSC"; break;
+	case 0x02: p = "EIAJ"; break;
+	case 0x03: p = "A2-M"; break;
+	case 0x04: p = "A2-BG"; break;
+	case 0x05: p = "A2-DK1"; break;
+	case 0x06: p = "A2-DK2"; break;
+	case 0x07: p = "A2-DK3"; break;
+	case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
+	case 0x09: p = "AM-L"; break;
+	case 0x0a: p = "NICAM-BG"; break;
+	case 0x0b: p = "NICAM-DK"; break;
+	case 0x0c: p = "NICAM-I"; break;
+	case 0x0d: p = "NICAM-L"; break;
+	case 0x0e: p = "FM radio"; break;
+	case 0x0f: p = "automatic detection"; break;
+	default: p = "undefined";
+	}
+	cx25840_info("Configured audio standard: %s\n", p);
+
+	if ((audio_config >> 4) < 0xF) {
+		switch (audio_config & 0xF) {
+		case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break;
+		case 0x01: p = "MONO2 (LANGUAGE B)"; break;
+		case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
+		case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
+		case 0x04: p = "STEREO"; break;
+		case 0x05: p = "DUAL1 (AB)"; break;
+		case 0x06: p = "DUAL2 (AC) (FM)"; break;
+		case 0x07: p = "DUAL3 (BC) (FM)"; break;
+		case 0x08: p = "DUAL4 (AC) (AM)"; break;
+		case 0x09: p = "DUAL5 (BC) (AM)"; break;
+		case 0x0a: p = "SAP"; break;
+		default: p = "undefined";
+		}
+		cx25840_info("Configured audio mode:     %s\n", p);
+	} else {
+		switch (audio_config & 0xF) {
+		case 0x00: p = "BG"; break;
+		case 0x01: p = "DK1"; break;
+		case 0x02: p = "DK2"; break;
+		case 0x03: p = "DK3"; break;
+		case 0x04: p = "I"; break;
+		case 0x05: p = "L"; break;
+		case 0x06: p = "BTSC"; break;
+		case 0x07: p = "EIAJ"; break;
+		case 0x08: p = "A2-M"; break;
+		case 0x09: p = "FM Radio"; break;
+		case 0x0f: p = "automatic standard and mode detection"; break;
+		default: p = "undefined";
+		}
+		cx25840_info("Configured audio system:   %s\n", p);
+	}
+
+	cx25840_info("Specified standard:        %s\n",
+		    vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection");
+
+	switch (state->input) {
+	case CX25840_COMPOSITE0: p = "Composite 0"; break;
+	case CX25840_COMPOSITE1: p = "Composite 1"; break;
+	case CX25840_SVIDEO0: p = "S-Video 0"; break;
+	case CX25840_SVIDEO1: p = "S-Video 1"; break;
+	case CX25840_TUNER: p = "Tuner"; break;
+	}
+	cx25840_info("Specified input:           %s\n", p);
+	cx25840_info("Specified audio input:     %s\n",
+		    state->audio_input == 0 ? "Tuner" : "External");
+
+	switch (state->audclk_freq) {
+	case V4L2_AUDCLK_441_KHZ: p = "44.1 kHz"; break;
+	case V4L2_AUDCLK_48_KHZ: p = "48 kHz"; break;
+	case V4L2_AUDCLK_32_KHZ: p = "32 kHz"; break;
+	default: p = "undefined";
+	}
+	cx25840_info("Specified audioclock freq: %s\n", p);
+
+	switch (pref_mode & 0xf) {
+	case 0: p = "mono/language A"; break;
+	case 1: p = "language B"; break;
+	case 2: p = "language C"; break;
+	case 3: p = "analog fallback"; break;
+	case 4: p = "stereo"; break;
+	case 5: p = "language AC"; break;
+	case 6: p = "language BC"; break;
+	case 7: p = "language AB"; break;
+	default: p = "undefined";
+	}
+	cx25840_info("Preferred audio mode:      %s\n", p);
+
+	if ((audio_config & 0xf) == 0xf) {
+		switch ((afc0 >> 3) & 0x3) {
+		case 0: p = "system DK"; break;
+		case 1: p = "system L"; break;
+		case 2: p = "autodetect"; break;
+		default: p = "undefined";
+		}
+		cx25840_info("Selected 65 MHz format:    %s\n", p);
+
+		switch (afc0 & 0x7) {
+		case 0: p = "chroma"; break;
+		case 1: p = "BTSC"; break;
+		case 2: p = "EIAJ"; break;
+		case 3: p = "A2-M"; break;
+		case 4: p = "autodetect"; break;
+		default: p = "undefined";
+		}
+		cx25840_info("Selected 45 MHz format:    %s\n", p);
+	}
+}
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
new file mode 100644
index 00000000000..df9d50a7554
--- /dev/null
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -0,0 +1,167 @@
+/* cx25840 firmware functions
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/firmware.h>
+#include <media/v4l2-common.h>
+
+#include "cx25840.h"
+
+#define FWFILE "v4l-cx25840.fw"
+#define FWSEND 1024
+
+#define FWDEV(x) &((x)->adapter->dev)
+
+static int fastfw = 1;
+static char *firmware = FWFILE;
+
+module_param(fastfw, bool, 0444);
+module_param(firmware, charp, 0444);
+
+MODULE_PARM_DESC(fastfw, "Load firmware fast [0=100MHz 1=333MHz (default)]");
+MODULE_PARM_DESC(firmware, "Firmware image [default: " FWFILE "]");
+
+static inline void set_i2c_delay(struct i2c_client *client, int delay)
+{
+	struct i2c_algo_bit_data *algod = client->adapter->algo_data;
+
+	/* We aren't guaranteed to be using algo_bit,
+	 * so avoid the null pointer dereference
+	 * and disable the 'fast firmware load' */
+	if (algod) {
+		algod->udelay = delay;
+	} else {
+		fastfw = 0;
+	}
+}
+
+static inline void start_fw_load(struct i2c_client *client)
+{
+	/* DL_ADDR_LB=0 DL_ADDR_HB=0 */
+	cx25840_write(client, 0x800, 0x00);
+	cx25840_write(client, 0x801, 0x00);
+	// DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1
+	cx25840_write(client, 0x803, 0x0b);
+	/* AUTO_INC_DIS=1 */
+	cx25840_write(client, 0x000, 0x20);
+
+	if (fastfw)
+		set_i2c_delay(client, 3);
+}
+
+static inline void end_fw_load(struct i2c_client *client)
+{
+	if (fastfw)
+		set_i2c_delay(client, 10);
+
+	/* AUTO_INC_DIS=0 */
+	cx25840_write(client, 0x000, 0x00);
+	/* DL_ENABLE=0 */
+	cx25840_write(client, 0x803, 0x03);
+}
+
+static inline int check_fw_load(struct i2c_client *client, int size)
+{
+	/* DL_ADDR_HB DL_ADDR_LB */
+	int s = cx25840_read(client, 0x801) << 8;
+	s |= cx25840_read(client, 0x800);
+
+	if (size != s) {
+		cx25840_err("firmware %s load failed\n", firmware);
+		return -EINVAL;
+	}
+
+	cx25840_info("loaded %s firmware (%d bytes)\n", firmware, size);
+	return 0;
+}
+
+static inline int fw_write(struct i2c_client *client, u8 * data, int size)
+{
+	if (i2c_master_send(client, data, size) < size) {
+
+		if (fastfw) {
+			cx25840_err("333MHz i2c firmware load failed\n");
+			fastfw = 0;
+			set_i2c_delay(client, 10);
+
+			if (i2c_master_send(client, data, size) < size) {
+				cx25840_err
+				    ("100MHz i2c firmware load failed\n");
+				return -ENOSYS;
+			}
+
+		} else {
+			cx25840_err("firmware load i2c failure\n");
+			return -ENOSYS;
+		}
+
+	}
+
+	return 0;
+}
+
+int cx25840_loadfw(struct i2c_client *client)
+{
+	const struct firmware *fw = NULL;
+	u8 buffer[4], *ptr;
+	int size, send, retval;
+
+	if (request_firmware(&fw, firmware, FWDEV(client)) != 0) {
+		cx25840_err("unable to open firmware %s\n", firmware);
+		return -EINVAL;
+	}
+
+	start_fw_load(client);
+
+	buffer[0] = 0x08;
+	buffer[1] = 0x02;
+	buffer[2] = fw->data[0];
+	buffer[3] = fw->data[1];
+	retval = fw_write(client, buffer, 4);
+
+	if (retval < 0) {
+		release_firmware(fw);
+		return retval;
+	}
+
+	size = fw->size - 2;
+	ptr = fw->data;
+	while (size > 0) {
+		ptr[0] = 0x08;
+		ptr[1] = 0x02;
+		send = size > (FWSEND - 2) ? FWSEND : size + 2;
+		retval = fw_write(client, ptr, send);
+
+		if (retval < 0) {
+			release_firmware(fw);
+			return retval;
+		}
+
+		size -= FWSEND - 2;
+		ptr += FWSEND - 2;
+	}
+
+	end_fw_load(client);
+
+	size = fw->size;
+	release_firmware(fw);
+
+	return check_fw_load(client, size);
+}
diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c
new file mode 100644
index 00000000000..13ba4e15dde
--- /dev/null
+++ b/drivers/media/video/cx25840/cx25840-vbi.c
@@ -0,0 +1,315 @@
+/* cx25840 VBI functions
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+#include <media/v4l2-common.h>
+
+#include "cx25840.h"
+
+static inline int odd_parity(u8 c)
+{
+	c ^= (c >> 4);
+	c ^= (c >> 2);
+	c ^= (c >> 1);
+
+	return c & 1;
+}
+
+static inline int decode_vps(u8 * dst, u8 * p)
+{
+	static const u8 biphase_tbl[] = {
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
+		0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
+		0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
+		0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
+		0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
+		0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
+		0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+	};
+
+	u8 c, err = 0;
+	int i;
+
+	for (i = 0; i < 2 * 13; i += 2) {
+		err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
+		c = (biphase_tbl[p[i + 1]] & 0xf) |
+		    ((biphase_tbl[p[i]] & 0xf) << 4);
+		dst[i / 2] = c;
+	}
+
+	return err & 0xf0;
+}
+
+void cx25840_vbi_setup(struct i2c_client *client)
+{
+	v4l2_std_id std = cx25840_get_v4lstd(client);
+
+	if (std & ~V4L2_STD_NTSC) {
+		/* datasheet startup, step 8d */
+		cx25840_write(client, 0x49f, 0x11);
+
+		cx25840_write(client, 0x470, 0x84);
+		cx25840_write(client, 0x471, 0x00);
+		cx25840_write(client, 0x472, 0x2d);
+		cx25840_write(client, 0x473, 0x5d);
+
+		cx25840_write(client, 0x474, 0x24);
+		cx25840_write(client, 0x475, 0x40);
+		cx25840_write(client, 0x476, 0x24);
+		cx25840_write(client, 0x477, 0x28);
+
+		cx25840_write(client, 0x478, 0x1f);
+		cx25840_write(client, 0x479, 0x02);
+
+		if (std & V4L2_STD_SECAM) {
+			cx25840_write(client, 0x47a, 0x80);
+			cx25840_write(client, 0x47b, 0x00);
+			cx25840_write(client, 0x47c, 0x5f);
+			cx25840_write(client, 0x47d, 0x42);
+		} else {
+			cx25840_write(client, 0x47a, 0x90);
+			cx25840_write(client, 0x47b, 0x20);
+			cx25840_write(client, 0x47c, 0x63);
+			cx25840_write(client, 0x47d, 0x82);
+		}
+
+		cx25840_write(client, 0x47e, 0x0a);
+		cx25840_write(client, 0x47f, 0x01);
+	} else {
+		/* datasheet startup, step 8d */
+		cx25840_write(client, 0x49f, 0x14);
+
+		cx25840_write(client, 0x470, 0x7a);
+		cx25840_write(client, 0x471, 0x00);
+		cx25840_write(client, 0x472, 0x2d);
+		cx25840_write(client, 0x473, 0x5b);
+
+		cx25840_write(client, 0x474, 0x1a);
+		cx25840_write(client, 0x475, 0x70);
+		cx25840_write(client, 0x476, 0x1e);
+		cx25840_write(client, 0x477, 0x1e);
+
+		cx25840_write(client, 0x478, 0x1f);
+		cx25840_write(client, 0x479, 0x02);
+		cx25840_write(client, 0x47a, 0x50);
+		cx25840_write(client, 0x47b, 0x66);
+
+		cx25840_write(client, 0x47c, 0x1f);
+		cx25840_write(client, 0x47d, 0x7c);
+		cx25840_write(client, 0x47e, 0x08);
+		cx25840_write(client, 0x47f, 0x00);
+	}
+}
+
+int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	struct v4l2_format *fmt;
+	struct v4l2_sliced_vbi_format *svbi;
+
+	switch (cmd) {
+	case VIDIOC_G_FMT:
+	{
+		static u16 lcr2vbi[] = {
+			0, V4L2_SLICED_TELETEXT_B, 0,	/* 1 */
+			0, V4L2_SLICED_WSS_625, 0,	/* 4 */
+			V4L2_SLICED_CAPTION_525,	/* 6 */
+			0, 0, V4L2_SLICED_VPS, 0, 0,	/* 9 */
+			0, 0, 0, 0
+		};
+		int i;
+
+		fmt = arg;
+		if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+			return -EINVAL;
+		svbi = &fmt->fmt.sliced;
+		memset(svbi, 0, sizeof(*svbi));
+		/* we're done if raw VBI is active */
+		if ((cx25840_read(client, 0x404) & 0x10) == 0)
+			break;
+
+		for (i = 7; i <= 23; i++) {
+			u8 v = cx25840_read(client, 0x424 + i - 7);
+
+			svbi->service_lines[0][i] = lcr2vbi[v >> 4];
+			svbi->service_lines[1][i] = lcr2vbi[v & 0xf];
+			svbi->service_set |=
+				 svbi->service_lines[0][i] | svbi->service_lines[1][i];
+		}
+		break;
+	}
+
+	case VIDIOC_S_FMT:
+	{
+		int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_NTSC);
+		int vbi_offset = is_pal ? 1 : 0;
+		int i, x;
+		u8 lcr[24];
+
+		fmt = arg;
+		if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+			return -EINVAL;
+		svbi = &fmt->fmt.sliced;
+		if (svbi->service_set == 0) {
+			/* raw VBI */
+			memset(svbi, 0, sizeof(*svbi));
+
+			/* Setup VBI */
+			cx25840_vbi_setup(client);
+
+			/* VBI Offset */
+			cx25840_write(client, 0x47f, vbi_offset);
+			cx25840_write(client, 0x404, 0x2e);
+			break;
+		}
+
+		for (x = 0; x <= 23; x++)
+			lcr[x] = 0x00;
+
+		/* Setup VBI */
+		cx25840_vbi_setup(client);
+
+		/* Sliced VBI */
+		cx25840_write(client, 0x404, 0x36);	/* Ancillery data */
+		cx25840_write(client, 0x406, 0x13);
+		cx25840_write(client, 0x47f, vbi_offset);
+
+		if (is_pal) {
+			for (i = 0; i <= 6; i++)
+				svbi->service_lines[0][i] =
+					svbi->service_lines[1][i] = 0;
+		} else {
+			for (i = 0; i <= 9; i++)
+				svbi->service_lines[0][i] =
+					svbi->service_lines[1][i] = 0;
+
+			for (i = 22; i <= 23; i++)
+				svbi->service_lines[0][i] =
+					svbi->service_lines[1][i] = 0;
+		}
+
+		for (i = 7; i <= 23; i++) {
+			for (x = 0; x <= 1; x++) {
+				switch (svbi->service_lines[1-x][i]) {
+				case V4L2_SLICED_TELETEXT_B:
+					lcr[i] |= 1 << (4 * x);
+					break;
+				case V4L2_SLICED_WSS_625:
+					lcr[i] |= 4 << (4 * x);
+					break;
+				case V4L2_SLICED_CAPTION_525:
+					lcr[i] |= 6 << (4 * x);
+					break;
+				case V4L2_SLICED_VPS:
+					lcr[i] |= 9 << (4 * x);
+					break;
+				}
+			}
+		}
+
+		for (x = 1, i = 0x424; i <= 0x434; i++, x++) {
+			cx25840_write(client, i, lcr[6 + x]);
+		}
+
+		cx25840_write(client, 0x43c, 0x16);
+
+		if (is_pal) {
+			cx25840_write(client, 0x474, 0x2a);
+		} else {
+			cx25840_write(client, 0x474, 0x1a + 6);
+		}
+		break;
+	}
+
+	case VIDIOC_INT_DECODE_VBI_LINE:
+	{
+		struct v4l2_decode_vbi_line *vbi = arg;
+		u8 *p = vbi->p;
+		int id1, id2, l, err = 0;
+
+		if (p[0] || p[1] != 0xff || p[2] != 0xff ||
+		    (p[3] != 0x55 && p[3] != 0x91)) {
+			vbi->line = vbi->type = 0;
+			break;
+		}
+
+		p += 4;
+		id1 = p[-1];
+		id2 = p[0] & 0xf;
+		l = p[2] & 0x3f;
+		l += 5;
+		p += 4;
+
+		switch (id2) {
+		case 1:
+			id2 = V4L2_SLICED_TELETEXT_B;
+			break;
+		case 4:
+			id2 = V4L2_SLICED_WSS_625;
+			break;
+		case 6:
+			id2 = V4L2_SLICED_CAPTION_525;
+			err = !odd_parity(p[0]) || !odd_parity(p[1]);
+			break;
+		case 9:
+			id2 = V4L2_SLICED_VPS;
+			if (decode_vps(p, p) != 0) {
+				err = 1;
+			}
+			break;
+		default:
+			id2 = 0;
+			err = 1;
+			break;
+		}
+
+		vbi->type = err ? 0 : id2;
+		vbi->line = err ? 0 : l;
+		vbi->is_second_field = err ? 0 : (id1 == 0x55);
+		vbi->p = p;
+		break;
+	}
+	}
+
+	return 0;
+}
diff --git a/drivers/media/video/cx25840/cx25840.h b/drivers/media/video/cx25840/cx25840.h
new file mode 100644
index 00000000000..5c3f0639fb7
--- /dev/null
+++ b/drivers/media/video/cx25840/cx25840.h
@@ -0,0 +1,85 @@
+/* cx25840 API header
+ *
+ * Copyright (C) 2003-2004 Chris Kennedy
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _CX25840_H_
+#define _CX25840_H_
+
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+
+extern int cx25840_debug;
+
+#define cx25840_dbg(fmt, arg...) do { if (cx25840_debug) \
+	printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+	       i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+
+#define cx25840_err(fmt, arg...) do { \
+	printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+	       i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+
+#define cx25840_info(fmt, arg...) do { \
+	printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+	       i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+
+#define CX25840_CID_CARDTYPE (V4L2_CID_PRIVATE_BASE+0)
+
+enum cx25840_cardtype {
+	CARDTYPE_PVR150,
+	CARDTYPE_PG600
+};
+
+enum cx25840_input {
+	CX25840_TUNER,
+	CX25840_COMPOSITE0,
+	CX25840_COMPOSITE1,
+	CX25840_SVIDEO0,
+	CX25840_SVIDEO1
+};
+
+struct cx25840_state {
+	enum cx25840_cardtype cardtype;
+	enum cx25840_input input;
+	int audio_input;
+	enum v4l2_audio_clock_freq audclk_freq;
+};
+
+/* ----------------------------------------------------------------------- */
+/* cx25850-core.c 							   */
+int cx25840_write(struct i2c_client *client, u16 addr, u8 value);
+int cx25840_write4(struct i2c_client *client, u16 addr, u32 value);
+u8 cx25840_read(struct i2c_client *client, u16 addr);
+u32 cx25840_read4(struct i2c_client *client, u16 addr);
+int cx25840_and_or(struct i2c_client *client, u16 addr, u8 mask, u8 value);
+v4l2_std_id cx25840_get_v4lstd(struct i2c_client *client);
+
+/* ----------------------------------------------------------------------- */
+/* cx25850-firmware.c                                                      */
+int cx25840_loadfw(struct i2c_client *client);
+
+/* ----------------------------------------------------------------------- */
+/* cx25850-audio.c                                                         */
+int cx25840_audio(struct i2c_client *client, unsigned int cmd, void *arg);
+
+/* ----------------------------------------------------------------------- */
+/* cx25850-vbi.c                                                           */
+void cx25840_vbi_setup(struct i2c_client *client);
+int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg);
+
+#endif
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 9cce91ec334..99ea955f598 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -439,9 +439,6 @@ static int dvb_register(struct cx8802_dev *dev)
 	/* Put the analog decoder in standby to keep it quiet */
 	cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
 
-	/* Put the analog decoder in standby to keep it quiet */
-	cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
-
 	/* register everything */
 	return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
 }
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 32c49df58ad..9b94f77d6fd 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -120,9 +120,6 @@ static int get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	if (buf[1]==0xff)
 		return 0;
 
-	/* avoid fast reapeating */
-	if (buf[1]==ir->old)
-		return 0;
 	ir->old=buf[1];
 
 	/* Rearranges bits to the right order */
diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c
index ed81934ef3c..5abfc0fbf6d 100644
--- a/drivers/media/video/ir-kbd-gpio.c
+++ b/drivers/media/video/ir-kbd-gpio.c
@@ -221,24 +221,99 @@ static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = {
 	[ 24 ] = KEY_MUTE         // mute/unmute
 };
 
+static IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = {
+	[0x00] = KEY_KP0,
+	[0x01] = KEY_KP1,
+	[0x02] = KEY_KP2,
+	[0x03] = KEY_KP3,
+	[0x04] = KEY_KP4,
+	[0x05] = KEY_KP5,
+	[0x06] = KEY_KP6,
+	[0x07] = KEY_KP7,
+	[0x08] = KEY_KP8,
+	[0x09] = KEY_KP9,
+	[0x0a] = KEY_TV,
+	[0x0b] = KEY_AUX,
+	[0x0c] = KEY_DVD,
+	[0x0d] = KEY_POWER,
+	[0x0e] = KEY_MHP,	/* labelled 'Picture' */
+	[0x0f] = KEY_AUDIO,
+	[0x10] = KEY_INFO,
+	[0x11] = KEY_F13,	/* 16:9 */
+	[0x12] = KEY_F14,	/* 14:9 */
+	[0x13] = KEY_EPG,
+	[0x14] = KEY_EXIT,
+	[0x15] = KEY_MENU,
+	[0x16] = KEY_UP,
+	[0x17] = KEY_DOWN,
+	[0x18] = KEY_LEFT,
+	[0x19] = KEY_RIGHT,
+	[0x1a] = KEY_ENTER,
+	[0x1b] = KEY_CHANNELUP,
+	[0x1c] = KEY_CHANNELDOWN,
+	[0x1d] = KEY_VOLUMEUP,
+	[0x1e] = KEY_VOLUMEDOWN,
+	[0x1f] = KEY_RED,
+	[0x20] = KEY_GREEN,
+	[0x21] = KEY_YELLOW,
+	[0x22] = KEY_BLUE,
+	[0x23] = KEY_SUBTITLE,
+	[0x24] = KEY_F15,	/* AD */
+	[0x25] = KEY_TEXT,
+	[0x26] = KEY_MUTE,
+	[0x27] = KEY_REWIND,
+	[0x28] = KEY_STOP,
+	[0x29] = KEY_PLAY,
+	[0x2a] = KEY_FASTFORWARD,
+	[0x2b] = KEY_F16,	/* chapter */
+	[0x2c] = KEY_PAUSE,
+	[0x2d] = KEY_PLAY,
+	[0x2e] = KEY_RECORD,
+	[0x2f] = KEY_F17,	/* picture in picture */
+	[0x30] = KEY_KPPLUS,	/* zoom in */
+	[0x31] = KEY_KPMINUS,	/* zoom out */
+	[0x32] = KEY_F18,	/* capture */
+	[0x33] = KEY_F19,	/* web */
+	[0x34] = KEY_EMAIL,
+	[0x35] = KEY_PHONE,
+	[0x36] = KEY_PC
+};
+
 struct IR {
 	struct bttv_sub_device  *sub;
 	struct input_dev        *input;
 	struct ir_input_state   ir;
 	char                    name[32];
 	char                    phys[32];
+
+	/* Usual gpio signalling */
+
 	u32                     mask_keycode;
 	u32                     mask_keydown;
 	u32                     mask_keyup;
-
-	int                     polling;
+	u32			polling;
 	u32                     last_gpio;
 	struct work_struct      work;
 	struct timer_list       timer;
+
+	/* RC5 gpio */
+
+	u32 rc5_gpio;
+	struct timer_list timer_end;	/* timer_end for code completion */
+	struct timer_list timer_keyup;	/* timer_end for key release */
+	u32 last_rc5;			/* last good rc5 code */
+	u32 last_bit;			/* last raw bit seen */
+	u32 code;			/* raw code under construction */
+	struct timeval base_time;	/* time of last seen code */
+	int active;			/* building raw code */
 };
 
 static int debug;
 module_param(debug, int, 0644);    /* debug level (0,1,2) */
+static int repeat_delay = 500;
+module_param(repeat_delay, int, 0644);
+static int repeat_period = 33;
+module_param(repeat_period, int, 0644);
 
 #define DEVNAME "ir-kbd-gpio"
 #define dprintk(fmt, arg...)	if (debug) \
@@ -254,7 +329,7 @@ static struct bttv_sub_driver driver = {
 		.probe	= ir_probe,
 		.remove	= ir_remove,
 	},
-	.gpio_irq       = ir_irq,
+	.gpio_irq 	= ir_irq,
 };
 
 /* ---------------------------------------------------------------------- */
@@ -327,6 +402,173 @@ static void ir_work(void *data)
 	mod_timer(&ir->timer, timeout);
 }
 
+/* ---------------------------------------------------------------*/
+
+static int rc5_remote_gap = 885;
+module_param(rc5_remote_gap, int, 0644);
+static int rc5_key_timeout = 200;
+module_param(rc5_key_timeout, int, 0644);
+
+#define RC5_START(x)	(((x)>>12)&3)
+#define RC5_TOGGLE(x)	(((x)>>11)&1)
+#define RC5_ADDR(x)	(((x)>>6)&31)
+#define RC5_INSTR(x)	((x)&63)
+
+/* decode raw bit pattern to RC5 code */
+static u32 rc5_decode(unsigned int code)
+{
+	unsigned int org_code = code;
+	unsigned int pair;
+	unsigned int rc5 = 0;
+	int i;
+
+	code = (code << 1) | 1;
+	for (i = 0; i < 14; ++i) {
+		pair = code & 0x3;
+		code >>= 2;
+
+		rc5 <<= 1;
+		switch (pair) {
+		case 0:
+		case 2:
+			break;
+		case 1:
+			rc5 |= 1;
+			break;
+		case 3:
+			dprintk("bad code: %x\n", org_code);
+			return 0;
+		}
+	}
+	dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+	return rc5;
+}
+
+static int ir_rc5_irq(struct bttv_sub_device *sub)
+{
+	struct IR *ir = dev_get_drvdata(&sub->dev);
+	struct timeval tv;
+	u32 gpio;
+	u32 gap;
+	unsigned long current_jiffies, timeout;
+
+	/* read gpio port */
+	gpio = bttv_gpio_read(ir->sub->core);
+
+	/* remote IRQ? */
+	if (!(gpio & 0x20))
+		return 0;
+
+	/* get time of bit */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* active code => add bit */
+	if (ir->active) {
+		/* only if in the code (otherwise spurious IRQ or timer
+		   late) */
+		if (ir->last_bit < 28) {
+			ir->last_bit = (gap - rc5_remote_gap / 2) /
+			    rc5_remote_gap;
+			ir->code |= 1 << ir->last_bit;
+		}
+		/* starting new code */
+	} else {
+		ir->active = 1;
+		ir->code = 0;
+		ir->base_time = tv;
+		ir->last_bit = 0;
+
+		timeout = current_jiffies + (500 + 30 * HZ) / 1000;
+		mod_timer(&ir->timer_end, timeout);
+	}
+
+	/* toggle GPIO pin 4 to reset the irq */
+	bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4));
+	bttv_gpio_write(ir->sub->core, gpio | (1 << 4));
+	return 1;
+}
+
+static void ir_rc5_timer_end(unsigned long data)
+{
+	struct IR *ir = (struct IR *)data;
+	struct timeval tv;
+	unsigned long current_jiffies, timeout;
+	u32 gap;
+
+	/* get time */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
+	if (gap < 28000) {
+		dprintk("spurious timer_end\n");
+		return;
+	}
+
+	ir->active = 0;
+	if (ir->last_bit < 20) {
+		/* ignore spurious codes (caused by light/other remotes) */
+		dprintk("short code: %x\n", ir->code);
+	} else {
+		u32 rc5 = rc5_decode(ir->code);
+
+		/* two start bits? */
+		if (RC5_START(rc5) != 3) {
+			dprintk("rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+			/* right address? */
+		} else if (RC5_ADDR(rc5) == 0x0) {
+			u32 toggle = RC5_TOGGLE(rc5);
+			u32 instr = RC5_INSTR(rc5);
+
+			/* Good code, decide if repeat/repress */
+			if (toggle != RC5_TOGGLE(ir->last_rc5) ||
+			    instr != RC5_INSTR(ir->last_rc5)) {
+				dprintk("instruction %x, toggle %x\n", instr,
+					toggle);
+				ir_input_nokey(ir->input, &ir->ir);
+				ir_input_keydown(ir->input, &ir->ir, instr,
+						 instr);
+			}
+
+			/* Set/reset key-up timer */
+			timeout = current_jiffies + (500 + rc5_key_timeout
+						     * HZ) / 1000;
+			mod_timer(&ir->timer_keyup, timeout);
+
+			/* Save code for repeat test */
+			ir->last_rc5 = rc5;
+		}
+	}
+}
+
+static void ir_rc5_timer_keyup(unsigned long data)
+{
+	struct IR *ir = (struct IR *)data;
+
+	dprintk("key released\n");
+	ir_input_nokey(ir->input, &ir->ir);
+}
+
 /* ---------------------------------------------------------------------- */
 
 static int ir_probe(struct device *dev)
@@ -400,6 +642,12 @@ static int ir_probe(struct device *dev)
 		ir->mask_keyup   = 0x006000;
 		ir->polling      = 50; // ms
 		break;
+	case BTTV_BOARD_NEBULA_DIGITV:
+		ir_codes = ir_codes_nebula;
+		driver.any_irq = ir_rc5_irq;
+		driver.gpio_irq = NULL;
+		ir->rc5_gpio = 1;
+		 break;
 	}
 	if (NULL == ir_codes) {
 		kfree(ir);
@@ -407,9 +655,17 @@ static int ir_probe(struct device *dev)
 		return -ENODEV;
 	}
 
-	/* init hardware-specific stuff */
-	bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0);
-	ir->sub = sub;
+	if (ir->rc5_gpio) {
+		u32 gpio;
+		/* enable remote irq */
+		bttv_gpio_inout(sub->core, (1 << 4), 1 << 4);
+		gpio = bttv_gpio_read(sub->core);
+		bttv_gpio_write(sub->core, gpio & ~(1 << 4));
+		bttv_gpio_write(sub->core, gpio | (1 << 4));
+	} else {
+		/* init hardware-specific stuff */
+		bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0);
+	}
 
 	/* init input device */
 	snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
@@ -417,6 +673,7 @@ static int ir_probe(struct device *dev)
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 		 pci_name(sub->core->pci));
 
+	ir->sub = sub;
 	ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
@@ -437,11 +694,25 @@ static int ir_probe(struct device *dev)
 		ir->timer.function = ir_timer;
 		ir->timer.data     = (unsigned long)ir;
 		schedule_work(&ir->work);
+	} else if (ir->rc5_gpio) {
+		/* set timer_end for code completion */
+		init_timer(&ir->timer_end);
+		ir->timer_end.function = ir_rc5_timer_end;
+		ir->timer_end.data = (unsigned long)ir;
+
+		init_timer(&ir->timer_keyup);
+		ir->timer_keyup.function = ir_rc5_timer_keyup;
+		ir->timer_keyup.data = (unsigned long)ir;
 	}
 
 	/* all done */
 	dev_set_drvdata(dev, ir);
 	input_register_device(ir->input);
+	printk(DEVNAME ": %s detected at %s\n",ir->name,ir->phys);
+
+	/* the remote isn't as bouncy as a keyboard */
+	ir->input->rep[REP_DELAY] = repeat_delay;
+	ir->input->rep[REP_PERIOD] = repeat_period;
 
 	return 0;
 }
@@ -454,6 +725,15 @@ static int ir_remove(struct device *dev)
 		del_timer(&ir->timer);
 		flush_scheduled_work();
 	}
+	if (ir->rc5_gpio) {
+		u32 gpio;
+
+		del_timer(&ir->timer_end);
+		flush_scheduled_work();
+
+		gpio = bttv_gpio_read(ir->sub->core);
+		bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4));
+	}
 
 	input_unregister_device(ir->input);
 	kfree(ir);
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 0085567a142..801c736e932 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -183,6 +183,58 @@ static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	return 1;
 }
 
+/* The new pinnacle PCTV remote (with the colored buttons)
+ *
+ * Ricardo Cerqueira <v4l@cerqueira.org>
+ */
+
+int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	unsigned char b[4];
+	unsigned int start = 0,parity = 0,code = 0;
+
+	/* poll IR chip */
+	if (4 != i2c_master_recv(&ir->c,b,4)) {
+		dprintk(2,"read error\n");
+		return -EIO;
+	}
+
+	for (start = 0; start<4; start++) {
+		if (b[start] == 0x80) {
+			code=b[(start+3)%4];
+			parity=b[(start+2)%4];
+		}
+	}
+
+	/* Empty Request */
+	if (parity==0)
+		return 0;
+
+	/* Repeating... */
+	if (ir->old == parity)
+		return 0;
+
+
+	ir->old = parity;
+
+	/* Reduce code value to fit inside IR_KEYTAB_SIZE
+	 *
+	 * this is the only value that results in 42 unique
+	 * codes < 128
+	 */
+
+	code %= 0x88;
+
+	*ir_raw = code;
+	*ir_key = code;
+
+	dprintk(1,"Pinnacle PCTV key %02x\n", code);
+
+	return 1;
+}
+
+EXPORT_SYMBOL_GPL(get_key_pinnacle);
+
 /* ----------------------------------------------------------------------- */
 
 static void ir_key_poll(struct IR_i2c *ir)
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
new file mode 100644
index 00000000000..0235cef07b3
--- /dev/null
+++ b/drivers/media/video/saa7115.c
@@ -0,0 +1,1376 @@
+/* saa7115 - Philips SAA7114/SAA7115 video decoder driver
+ *
+ * Based on saa7114 driver by Maxim Yevtyushkin, which is based on
+ * the saa7111 driver by Dave Perks.
+ *
+ * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
+ * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
+ *
+ * Slight changes for video timing and attachment output by
+ * Wolfgang Scherr <scherr@net4you.net>
+ *
+ * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003)
+ * by Ronald Bultje <rbultje@ronald.bitfreak.net>
+ *
+ * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com>
+ * (2/17/2003)
+ *
+ * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+
+MODULE_DESCRIPTION("Philips SAA7114/SAA7115 video decoder driver");
+MODULE_AUTHOR("Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+#define saa7115_dbg(fmt,arg...) \
+	do { \
+		if (debug) \
+			printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+			       i2c_adapter_id(client->adapter), client->addr , ## arg); \
+	} while (0)
+
+#define saa7115_err(fmt, arg...) do { \
+	printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+	       i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+#define saa7115_info(fmt, arg...) do { \
+	printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+	       i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+
+static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+struct saa7115_state {
+	v4l2_std_id std;
+	int input;
+	int enable;
+	int bright;
+	int contrast;
+	int hue;
+	int sat;
+	enum v4l2_chip_ident ident;
+	enum v4l2_audio_clock_freq audclk_freq;
+};
+
+/* ----------------------------------------------------------------------- */
+
+static inline int saa7115_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int saa7115_writeregs(struct i2c_client *client, const unsigned char *regs)
+{
+	unsigned char reg, data;
+
+	while (*regs != 0x00) {
+		reg = *(regs++);
+		data = *(regs++);
+		if (saa7115_write(client, reg, data) < 0)
+			return -1;
+	}
+	return 0;
+}
+
+static inline int saa7115_read(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* If a value differs from the Hauppauge driver values, then the comment starts with
+   'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the
+   Hauppauge driver sets. */
+
+static const unsigned char saa7115_init_auto_input[] = {
+	0x01, 0x48,		/* white peak control disabled */
+	0x03, 0x20,		/* was 0x30. 0x20: long vertical blanking */
+	0x04, 0x90,		/* analog gain set to 0 */
+	0x05, 0x90,		/* analog gain set to 0 */
+	0x06, 0xeb,		/* horiz sync begin = -21 */
+	0x07, 0xe0,		/* horiz sync stop = -17 */
+	0x0a, 0x80,		/* was 0x88. decoder brightness, 0x80 is itu standard */
+	0x0b, 0x44,		/* was 0x48. decoder contrast, 0x44 is itu standard */
+	0x0c, 0x40,		/* was 0x47. decoder saturation, 0x40 is itu standard */
+	0x0d, 0x00,		/* chrominance hue control */
+	0x0f, 0x00,		/* chrominance gain control: use automicatic mode */
+	0x10, 0x06,		/* chrominance/luminance control: active adaptive combfilter */
+	0x11, 0x00,		/* delay control */
+	0x12, 0x9d,		/* RTS0 output control: VGATE */
+	0x13, 0x80,		/* X-port output control: ITU656 standard mode, RTCO output enable RTCE */
+	0x14, 0x00,		/* analog/ADC/auto compatibility control */
+	0x18, 0x40,		/* raw data gain 0x00 = nominal */
+	0x19, 0x80,		/* raw data offset 0x80 = 0 LSB */
+	0x1a, 0x77,		/* color killer level control 0x77 = recommended */
+	0x1b, 0x42,		/* misc chroma control 0x42 = recommended */
+	0x1c, 0xa9,		/* combfilter control 0xA9 = recommended */
+	0x1d, 0x01,		/* combfilter control 0x01 = recommended */
+	0x88, 0xd0,		/* reset device */
+	0x88, 0xf0,		/* set device programmed, all in operational mode */
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_reset_scaler[] = {
+	0x87, 0x00,		/* disable I-port output */
+	0x88, 0xd0,		/* reset scaler */
+	0x88, 0xf0,		/* activate scaler */
+	0x87, 0x01,		/* enable I-port output */
+	0x00, 0x00
+};
+
+/* ============== SAA7715 VIDEO templates =============  */
+
+static const unsigned char saa7115_cfg_60hz_fullres_x[] = {
+	0xcc, 0xd0,		/* hsize low (output), hor. output window size = 0x2d0 = 720 */
+	0xcd, 0x02,		/* hsize hi (output) */
+
+	/* Why not in 60hz-Land, too? */
+	0xd0, 0x01,		/* downscale = 1 */
+	0xd8, 0x00,		/* hor lum scaling 0x0400 = 1 */
+	0xd9, 0x04,
+	0xdc, 0x00,		/* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+	0xdd, 0x02,		/* H-scaling incr chroma */
+
+	0x00, 0x00
+};
+static const unsigned char saa7115_cfg_60hz_fullres_y[] = {
+	0xce, 0xf8,		/* vsize low (output), ver. output window size = 248 (but 60hz is 240?) */
+	0xcf, 0x00,		/* vsize hi (output) */
+
+	/* Why not in 60hz-Land, too? */
+	0xd5, 0x40,		/* Lum contrast, nominal value = 0x40 */
+	0xd6, 0x40,		/* Chroma satur. nominal value = 0x80 */
+
+	0xe0, 0x00,		/* V-scaling incr luma low */
+	0xe1, 0x04,		/* " hi */
+	0xe2, 0x00,		/* V-scaling incr chroma low */
+	0xe3, 0x04,		/* " hi */
+
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_60hz_video[] = {
+	0x80, 0x00,		/* reset tasks */
+	0x88, 0xd0,		/* reset scaler */
+
+	0x15, 0x03,		/* VGATE pulse start */
+	0x16, 0x11,		/* VGATE pulse stop */
+	0x17, 0x9c,		/* VGATE MSB and other values */
+
+	0x08, 0x68,		/* 0xBO: auto detection, 0x68 = NTSC */
+	0x0e, 0x07,		/* lots of different stuff... video autodetection is on */
+
+	0x5a, 0x06,		/* Vertical offset, standard 60hz value for ITU656 line counting */
+
+	/* Task A */
+	0x90, 0x80,		/* Task Handling Control */
+	0x91, 0x48,		/* X-port formats/config */
+	0x92, 0x40,		/* Input Ref. signal Def. */
+	0x93, 0x84,		/* I-port config */
+	0x94, 0x01,		/* hoffset low (input), 0x0002 is minimum */
+	0x95, 0x00,		/* hoffset hi (input) */
+	0x96, 0xd0,		/* hsize low (input), 0x02d0 = 720 */
+	0x97, 0x02,		/* hsize hi (input) */
+	0x98, 0x05,		/* voffset low (input) */
+	0x99, 0x00,		/* voffset hi (input) */
+	0x9a, 0x0c,		/* vsize low (input), 0x0c = 12 */
+	0x9b, 0x00,		/* vsize hi (input) */
+	0x9c, 0xa0,		/* hsize low (output), 0x05a0 = 1440 */
+	0x9d, 0x05,		/* hsize hi (output) */
+	0x9e, 0x0c,		/* vsize low (output), 0x0c = 12 */
+	0x9f, 0x00,		/* vsize hi (output) */
+
+	/* Task B */
+	0xc0, 0x00,		/* Task Handling Control */
+	0xc1, 0x08,		/* X-port formats/config */
+	0xc2, 0x00,		/* Input Ref. signal Def. */
+	0xc3, 0x80,		/* I-port config */
+	0xc4, 0x02,		/* hoffset low (input), 0x0002 is minimum */
+	0xc5, 0x00,		/* hoffset hi (input) */
+	0xc6, 0xd0,		/* hsize low (input), 0x02d0 = 720 */
+	0xc7, 0x02,		/* hsize hi (input) */
+	0xc8, 0x12,		/* voffset low (input), 0x12 = 18 */
+	0xc9, 0x00,		/* voffset hi (input) */
+	0xca, 0xf8,		/* vsize low (input), 0xf8 = 248 */
+	0xcb, 0x00,		/* vsize hi (input) */
+	0xcc, 0xd0,		/* hsize low (output), 0x02d0 = 720 */
+	0xcd, 0x02,		/* hsize hi (output) */
+
+	0xf0, 0xad,		/* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
+	0xf1, 0x05,		/* low bit with 0xF0 */
+	0xf5, 0xad,		/* Set pulse generator register */
+	0xf6, 0x01,
+
+	0x87, 0x00,		/* Disable I-port output */
+	0x88, 0xd0,		/* reset scaler */
+	0x80, 0x20,		/* Activate only task "B", continuous mode (was 0xA0) */
+	0x88, 0xf0,		/* activate scaler */
+	0x87, 0x01,		/* Enable I-port output */
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_50hz_fullres_x[] = {
+	0xcc, 0xd0,		/* hsize low (output), 720 same as 60hz */
+	0xcd, 0x02,		/* hsize hi (output) */
+
+	0xd0, 0x01,		/* down scale = 1 */
+	0xd8, 0x00,		/* hor lum scaling 0x0400 = 1 */
+	0xd9, 0x04,
+	0xdc, 0x00,		/* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+	0xdd, 0x02,		/* H-scaling incr chroma */
+
+	0x00, 0x00
+};
+static const unsigned char saa7115_cfg_50hz_fullres_y[] = {
+	0xce, 0x20,		/* vsize low (output), 0x0120 = 288 */
+	0xcf, 0x01,		/* vsize hi (output) */
+
+	0xd5, 0x40,		/* Lum contrast, nominal value = 0x40 */
+	0xd6, 0x40,		/* Chroma satur. nominal value = 0x80 */
+
+	0xe0, 0x00,		/* V-scaling incr luma low */
+	0xe1, 0x04,		/* " hi */
+	0xe2, 0x00,		/* V-scaling incr chroma low */
+	0xe3, 0x04,		/* " hi */
+
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_50hz_video[] = {
+	0x80, 0x00,		/* reset tasks */
+	0x88, 0xd0,		/* reset scaler */
+
+	0x15, 0x37,		/* VGATE start */
+	0x16, 0x16,		/* VGATE stop */
+	0x17, 0x99,		/* VGATE MSB and other values */
+
+	0x08, 0x28,		/* 0x28 = PAL */
+	0x0e, 0x07,		/* chrominance control 1 */
+
+	0x5a, 0x03,		/* Vertical offset, standard 50hz value */
+
+	/* Task A */
+	0x90, 0x81,		/* Task Handling Control */
+	0x91, 0x48,		/* X-port formats/config */
+	0x92, 0x40,		/* Input Ref. signal Def. */
+	0x93, 0x84,		/* I-port config */
+	/* This is weird: the datasheet says that you should use 2 as the minimum value, */
+	/* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
+	0x94, 0x00,		/* hoffset low (input), 0x0002 is minimum */
+	0x95, 0x00,		/* hoffset hi (input) */
+	0x96, 0xd0,		/* hsize low (input), 0x02d0 = 720 */
+	0x97, 0x02,		/* hsize hi (input) */
+	0x98, 0x03,		/* voffset low (input) */
+	0x99, 0x00,		/* voffset hi (input) */
+	0x9a, 0x12,		/* vsize low (input), 0x12 = 18 */
+	0x9b, 0x00,		/* vsize hi (input) */
+	0x9c, 0xa0,		/* hsize low (output), 0x05a0 = 1440 */
+	0x9d, 0x05,		/* hsize hi (output) */
+	0x9e, 0x12,		/* vsize low (output), 0x12 = 18 */
+	0x9f, 0x00,		/* vsize hi (output) */
+
+	/* Task B */
+	0xc0, 0x00,		/* Task Handling Control */
+	0xc1, 0x08,		/* X-port formats/config */
+	0xc2, 0x00,		/* Input Ref. signal Def. */
+	0xc3, 0x80,		/* I-port config */
+	0xc4, 0x00,		/* hoffset low (input), 0x0002 is minimum. See comment at 0x94 above. */
+	0xc5, 0x00,		/* hoffset hi (input) */
+	0xc6, 0xd0,		/* hsize low (input), 0x02d0 = 720 */
+	0xc7, 0x02,		/* hsize hi (input) */
+	0xc8, 0x16,		/* voffset low (input), 0x16 = 22 */
+	0xc9, 0x00,		/* voffset hi (input) */
+	0xca, 0x20,		/* vsize low (input), 0x0120 = 288 */
+	0xcb, 0x01,		/* vsize hi (input) */
+	0xcc, 0xd0,		/* hsize low (output), 0x02d0 = 720 */
+	0xcd, 0x02,		/* hsize hi (output) */
+	0xce, 0x20,		/* vsize low (output), 0x0120 = 288 */
+	0xcf, 0x01,		/* vsize hi (output) */
+
+	0xf0, 0xb0,		/* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
+	0xf1, 0x05,		/* low bit with 0xF0, (was 0x05) */
+	0xf5, 0xb0,		/* Set pulse generator register */
+	0xf6, 0x01,
+
+	0x87, 0x00,		/* Disable I-port output */
+	0x88, 0xd0,		/* reset scaler (was 0xD0) */
+	0x80, 0x20,		/* Activate only task "B" */
+	0x88, 0xf0,		/* activate scaler */
+	0x87, 0x01,		/* Enable I-port output */
+	0x00, 0x00
+};
+
+/* ============== SAA7715 VIDEO templates (end) =======  */
+
+static const unsigned char saa7115_cfg_vbi_on[] = {
+	0x80, 0x00,		/* reset tasks */
+	0x88, 0xd0,		/* reset scaler */
+	0x80, 0x30,		/* Activate both tasks */
+	0x88, 0xf0,		/* activate scaler */
+	0x87, 0x01,		/* Enable I-port output */
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_vbi_off[] = {
+	0x80, 0x00,		/* reset tasks */
+	0x88, 0xd0,		/* reset scaler */
+	0x80, 0x20,		/* Activate only task "B" */
+	0x88, 0xf0,		/* activate scaler */
+	0x87, 0x01,		/* Enable I-port output */
+	0x00, 0x00
+};
+
+static const unsigned char saa7115_init_misc[] = {
+	0x38, 0x03,		/* audio stuff */
+	0x39, 0x10,
+	0x3a, 0x08,
+
+	0x81, 0x01,		/* reg 0x15,0x16 define blanking window */
+	0x82, 0x00,
+	0x83, 0x01,		/* I port settings */
+	0x84, 0x20,
+	0x85, 0x21,
+	0x86, 0xc5,
+	0x87, 0x01,
+
+	/* Task A */
+	0xa0, 0x01,		/* down scale = 1 */
+	0xa1, 0x00,		/* prescale accumulation length = 1 */
+	0xa2, 0x00,		/* dc gain and fir prefilter control */
+	0xa4, 0x80,		/* Lum Brightness, nominal value = 0x80 */
+	0xa5, 0x40,		/* Lum contrast, nominal value = 0x40 */
+	0xa6, 0x40,		/* Chroma satur. nominal value = 0x80 */
+	0xa8, 0x00,		/* hor lum scaling 0x0200 = 2 zoom */
+	0xa9, 0x02,		/* note: 2 x zoom ensures that VBI lines have same length as video lines. */
+	0xaa, 0x00,		/* H-phase offset Luma = 0 */
+	0xac, 0x00,		/* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+	0xad, 0x01,		/* H-scaling incr chroma */
+	0xae, 0x00,		/* H-phase offset chroma. must be offset luma / 2 */
+
+	0xb0, 0x00,		/* V-scaling incr luma low */
+	0xb1, 0x04,		/* " hi */
+	0xb2, 0x00,		/* V-scaling incr chroma low */
+	0xb3, 0x04,		/* " hi */
+	0xb4, 0x01,		/* V-scaling mode control */
+	0xb8, 0x00,		/* V-phase offset chroma 00 */
+	0xb9, 0x00,		/* V-phase offset chroma 01 */
+	0xba, 0x00,		/* V-phase offset chroma 10 */
+	0xbb, 0x00,		/* V-phase offset chroma 11 */
+	0xbc, 0x00,		/* V-phase offset luma 00 */
+	0xbd, 0x00,		/* V-phase offset luma 01 */
+	0xbe, 0x00,		/* V-phase offset luma 10 */
+	0xbf, 0x00,		/* V-phase offset luma 11 */
+
+	/* Task B */
+	0xd0, 0x01,		/* down scale = 1 */
+	0xd1, 0x00,		/* prescale accumulation length = 1 */
+	0xd2, 0x00,		/* dc gain and fir prefilter control */
+	0xd4, 0x80,		/* Lum Brightness, nominal value = 0x80 */
+	0xd5, 0x40,		/* Lum contrast, nominal value = 0x40 */
+	0xd6, 0x40,		/* Chroma satur. nominal value = 0x80 */
+	0xd8, 0x00,		/* hor lum scaling 0x0400 = 1 */
+	0xd9, 0x04,
+	0xda, 0x00,		/* H-phase offset Luma = 0 */
+	0xdc, 0x00,		/* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+	0xdd, 0x02,		/* H-scaling incr chroma */
+	0xde, 0x00,		/* H-phase offset chroma. must be offset luma / 2 */
+
+	0xe0, 0x00,		/* V-scaling incr luma low */
+	0xe1, 0x04,		/* " hi */
+	0xe2, 0x00,		/* V-scaling incr chroma low */
+	0xe3, 0x04,		/* " hi */
+	0xe4, 0x01,		/* V-scaling mode control */
+	0xe8, 0x00,		/* V-phase offset chroma 00 */
+	0xe9, 0x00,		/* V-phase offset chroma 01 */
+	0xea, 0x00,		/* V-phase offset chroma 10 */
+	0xeb, 0x00,		/* V-phase offset chroma 11 */
+	0xec, 0x00,		/* V-phase offset luma 00 */
+	0xed, 0x00,		/* V-phase offset luma 01 */
+	0xee, 0x00,		/* V-phase offset luma 10 */
+	0xef, 0x00,		/* V-phase offset luma 11 */
+
+	0xf2, 0x50,		/* crystal clock = 24.576 MHz, target = 27MHz */
+	0xf3, 0x46,
+	0xf4, 0x00,
+	0xf7, 0x4b,		/* not the recommended settings! */
+	0xf8, 0x00,
+	0xf9, 0x4b,
+	0xfa, 0x00,
+	0xfb, 0x4b,
+	0xff, 0x88,		/* PLL2 lock detection settings: 71 lines 50% phase error */
+
+	/* Turn off VBI */
+	0x40, 0x20,             /* No framing code errors allowed. */
+	0x41, 0xff,
+	0x42, 0xff,
+	0x43, 0xff,
+	0x44, 0xff,
+	0x45, 0xff,
+	0x46, 0xff,
+	0x47, 0xff,
+	0x48, 0xff,
+	0x49, 0xff,
+	0x4a, 0xff,
+	0x4b, 0xff,
+	0x4c, 0xff,
+	0x4d, 0xff,
+	0x4e, 0xff,
+	0x4f, 0xff,
+	0x50, 0xff,
+	0x51, 0xff,
+	0x52, 0xff,
+	0x53, 0xff,
+	0x54, 0xff,
+	0x55, 0xff,
+	0x56, 0xff,
+	0x57, 0xff,
+	0x58, 0x40,
+	0x59, 0x47,
+	0x5b, 0x83,
+	0x5d, 0xbd,
+	0x5e, 0x35,
+
+	0x02, 0x84,		/* input tuner -> input 4, amplifier active */
+	0x09, 0x53,		/* 0x53, was 0x56 for 60hz. luminance control */
+
+	0x80, 0x20,		/* enable task B */
+	0x88, 0xd0,
+	0x88, 0xf0,
+	0x00, 0x00
+};
+
+/* ============== SAA7715 AUDIO settings ============= */
+
+/* 48.0 kHz */
+static const unsigned char saa7115_cfg_48_audio[] = {
+	0x34, 0xce,
+	0x35, 0xfb,
+	0x36, 0x30,
+	0x00, 0x00
+};
+
+/* 44.1 kHz */
+static const unsigned char saa7115_cfg_441_audio[] = {
+	0x34, 0xf2,
+	0x35, 0x00,
+	0x36, 0x2d,
+	0x00, 0x00
+};
+
+/* 32.0 kHz */
+static const unsigned char saa7115_cfg_32_audio[] = {
+	0x34, 0xdf,
+	0x35, 0xa7,
+	0x36, 0x20,
+	0x00, 0x00
+};
+
+/* 48.0 kHz 60hz */
+static const unsigned char saa7115_cfg_60hz_48_audio[] = {
+	0x30, 0xcd,
+	0x31, 0x20,
+	0x32, 0x03,
+	0x00, 0x00
+};
+
+/* 48.0 kHz 50hz */
+static const unsigned char saa7115_cfg_50hz_48_audio[] = {
+	0x30, 0x00,
+	0x31, 0xc0,
+	0x32, 0x03,
+	0x00, 0x00
+};
+
+/* 44.1 kHz 60hz */
+static const unsigned char saa7115_cfg_60hz_441_audio[] = {
+	0x30, 0xbc,
+	0x31, 0xdf,
+	0x32, 0x02,
+	0x00, 0x00
+};
+
+/* 44.1 kHz 50hz */
+static const unsigned char saa7115_cfg_50hz_441_audio[] = {
+	0x30, 0x00,
+	0x31, 0x72,
+	0x32, 0x03,
+	0x00, 0x00
+};
+
+/* 32.0 kHz 60hz */
+static const unsigned char saa7115_cfg_60hz_32_audio[] = {
+	0x30, 0xde,
+	0x31, 0x15,
+	0x32, 0x02,
+	0x00, 0x00
+};
+
+/* 32.0 kHz 50hz */
+static const unsigned char saa7115_cfg_50hz_32_audio[] = {
+	0x30, 0x00,
+	0x31, 0x80,
+	0x32, 0x02,
+	0x00, 0x00
+};
+
+static int saa7115_odd_parity(u8 c)
+{
+	c ^= (c >> 4);
+	c ^= (c >> 2);
+	c ^= (c >> 1);
+
+	return c & 1;
+}
+
+static int saa7115_decode_vps(u8 * dst, u8 * p)
+{
+	static const u8 biphase_tbl[] = {
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
+		0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
+		0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
+		0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
+		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
+		0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
+		0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
+		0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
+		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+	};
+	int i;
+	u8 c, err = 0;
+
+	for (i = 0; i < 2 * 13; i += 2) {
+		err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
+		c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4);
+		dst[i / 2] = c;
+	}
+	return err & 0xf0;
+}
+
+static int saa7115_decode_wss(u8 * p)
+{
+	static const int wss_bits[8] = {
+		0, 0, 0, 1, 0, 1, 1, 1
+	};
+	unsigned char parity;
+	int wss = 0;
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		int b1 = wss_bits[p[i] & 7];
+		int b2 = wss_bits[(p[i] >> 3) & 7];
+
+		if (b1 == b2)
+			return -1;
+		wss |= b2 << i;
+	}
+	parity = wss & 15;
+	parity ^= parity >> 2;
+	parity ^= parity >> 1;
+
+	if (!(parity & 1))
+		return -1;
+
+	return wss;
+}
+
+
+static int saa7115_set_audio_clock_freq(struct i2c_client *client, enum v4l2_audio_clock_freq freq)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+
+	saa7115_dbg("set audio clock freq: %d\n", freq);
+	switch (freq) {
+		case V4L2_AUDCLK_32_KHZ:
+			saa7115_writeregs(client, saa7115_cfg_32_audio);
+			if (state->std & V4L2_STD_525_60) {
+				saa7115_writeregs(client, saa7115_cfg_60hz_32_audio);
+			} else {
+				saa7115_writeregs(client, saa7115_cfg_50hz_32_audio);
+			}
+			break;
+		case V4L2_AUDCLK_441_KHZ:
+			saa7115_writeregs(client, saa7115_cfg_441_audio);
+			if (state->std & V4L2_STD_525_60) {
+				saa7115_writeregs(client, saa7115_cfg_60hz_441_audio);
+			} else {
+				saa7115_writeregs(client, saa7115_cfg_50hz_441_audio);
+			}
+			break;
+		case V4L2_AUDCLK_48_KHZ:
+			saa7115_writeregs(client, saa7115_cfg_48_audio);
+			if (state->std & V4L2_STD_525_60) {
+				saa7115_writeregs(client, saa7115_cfg_60hz_48_audio);
+			} else {
+				saa7115_writeregs(client, saa7115_cfg_50hz_48_audio);
+			}
+			break;
+		default:
+			saa7115_dbg("invalid audio setting %d\n", freq);
+			return -EINVAL;
+	}
+	state->audclk_freq = freq;
+	return 0;
+}
+
+static int saa7115_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		if (ctrl->value < 0 || ctrl->value > 255) {
+			saa7115_err("invalid brightness setting %d\n", ctrl->value);
+			return -ERANGE;
+		}
+
+		state->bright = ctrl->value;
+		saa7115_write(client, 0x0a, state->bright);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		if (ctrl->value < 0 || ctrl->value > 127) {
+			saa7115_err("invalid contrast setting %d\n", ctrl->value);
+			return -ERANGE;
+		}
+
+		state->contrast = ctrl->value;
+		saa7115_write(client, 0x0b, state->contrast);
+		break;
+
+	case V4L2_CID_SATURATION:
+		if (ctrl->value < 0 || ctrl->value > 127) {
+			saa7115_err("invalid saturation setting %d\n", ctrl->value);
+			return -ERANGE;
+		}
+
+		state->sat = ctrl->value;
+		saa7115_write(client, 0x0c, state->sat);
+		break;
+
+	case V4L2_CID_HUE:
+		if (ctrl->value < -127 || ctrl->value > 127) {
+			saa7115_err("invalid hue setting %d\n", ctrl->value);
+			return -ERANGE;
+		}
+
+		state->hue = ctrl->value;
+		saa7115_write(client, 0x0d, state->hue);
+		break;
+	}
+
+	return 0;
+}
+
+static int saa7115_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = state->bright;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = state->contrast;
+		break;
+	case V4L2_CID_SATURATION:
+		ctrl->value = state->sat;
+		break;
+	case V4L2_CID_HUE:
+		ctrl->value = state->hue;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+	int taskb = saa7115_read(client, 0x80) & 0x10;
+
+	// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
+	if (std & V4L2_STD_525_60) {
+		saa7115_dbg("decoder set standard 60 Hz\n");
+		saa7115_writeregs(client, saa7115_cfg_60hz_video);
+	} else {
+		saa7115_dbg("decoder set standard 50 Hz\n");
+		saa7115_writeregs(client, saa7115_cfg_50hz_video);
+	}
+
+	state->std = std;
+
+	/* restart task B if needed */
+	if (taskb && state->ident == V4L2_IDENT_SAA7114) {
+		saa7115_writeregs(client, saa7115_cfg_vbi_on);
+	}
+
+	/* switch audio mode too! */
+	saa7115_set_audio_clock_freq(client, state->audclk_freq);
+}
+
+static v4l2_std_id saa7115_get_v4lstd(struct i2c_client *client)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+
+	return state->std;
+}
+
+static void saa7115_log_status(struct i2c_client *client)
+{
+	static const char * const audclk_freq_strs[] = {
+		"44.1 kHz",
+		"48 kHz",
+		"32 kHz"
+	};
+	struct saa7115_state *state = i2c_get_clientdata(client);
+	int reg1e, reg1f;
+	int signalOk;
+	int vcr;
+
+	saa7115_info("Audio frequency: %s\n", audclk_freq_strs[state->audclk_freq]);
+	if (client->name[6] == '4') {
+		/* status for the saa7114 */
+		reg1f = saa7115_read(client, 0x1f);
+		signalOk = (reg1f & 0xc1) == 0x81;
+		saa7115_info("Video signal:    %s\n", signalOk ? "ok" : "bad");
+		saa7115_info("Frequency:       %s\n", (reg1f & 0x20) ? "60Hz" : "50Hz");
+		return;
+	}
+
+	/* status for the saa7115 */
+	reg1e = saa7115_read(client, 0x1e);
+	reg1f = saa7115_read(client, 0x1f);
+
+	signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80;
+	vcr = !(reg1f & 0x10);
+
+	saa7115_info("Video signal:    %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
+	saa7115_info("Frequency:       %s\n", (reg1f & 0x20) ? "60Hz" : "50Hz");
+
+	switch (reg1e & 0x03) {
+		case 1:
+			saa7115_info("Detected format: NTSC\n");
+			break;
+		case 2:
+			saa7115_info("Detected format: PAL\n");
+			break;
+		case 3:
+			saa7115_info("Detected format: SECAM\n");
+			break;
+		default:
+			saa7115_info("Detected format: BW/No color\n");
+			break;
+	}
+}
+
+/* setup the sliced VBI lcr registers according to the sliced VBI format */
+static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_format *fmt)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+	int is_50hz = (state->std & V4L2_STD_625_50);
+	u8 lcr[24];
+	int i, x;
+
+	/* saa7114 doesn't yet support VBI */
+	if (state->ident == V4L2_IDENT_SAA7114)
+		return;
+
+	for (i = 0; i <= 23; i++)
+		lcr[i] = 0xff;
+
+	if (fmt->service_set == 0) {
+		/* raw VBI */
+		if (is_50hz)
+			for (i = 6; i <= 23; i++)
+				lcr[i] = 0xdd;
+		else
+			for (i = 10; i <= 21; i++)
+				lcr[i] = 0xdd;
+	} else {
+		/* sliced VBI */
+		/* first clear lines that cannot be captured */
+		if (is_50hz) {
+			for (i = 0; i <= 5; i++)
+				fmt->service_lines[0][i] =
+					fmt->service_lines[1][i] = 0;
+		}
+		else {
+			for (i = 0; i <= 9; i++)
+				fmt->service_lines[0][i] =
+					fmt->service_lines[1][i] = 0;
+			for (i = 22; i <= 23; i++)
+				fmt->service_lines[0][i] =
+					fmt->service_lines[1][i] = 0;
+		}
+
+		/* Now set the lcr values according to the specified service */
+		for (i = 6; i <= 23; i++) {
+			lcr[i] = 0;
+			for (x = 0; x <= 1; x++) {
+				switch (fmt->service_lines[1-x][i]) {
+					case 0:
+						lcr[i] |= 0xf << (4 * x);
+						break;
+					case V4L2_SLICED_TELETEXT_B:
+						lcr[i] |= 1 << (4 * x);
+						break;
+					case V4L2_SLICED_CAPTION_525:
+						lcr[i] |= 4 << (4 * x);
+						break;
+					case V4L2_SLICED_WSS_625:
+						lcr[i] |= 5 << (4 * x);
+						break;
+					case V4L2_SLICED_VPS:
+						lcr[i] |= 7 << (4 * x);
+						break;
+				}
+			}
+		}
+	}
+
+	/* write the lcr registers */
+	for (i = 2; i <= 23; i++) {
+		saa7115_write(client, i - 2 + 0x41, lcr[i]);
+	}
+
+	/* enable/disable raw VBI capturing */
+	saa7115_writeregs(client, fmt->service_set == 0 ? saa7115_cfg_vbi_on : saa7115_cfg_vbi_off);
+}
+
+static int saa7115_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
+{
+	static u16 lcr2vbi[] = {
+		0, V4L2_SLICED_TELETEXT_B, 0,	/* 1 */
+		0, V4L2_SLICED_CAPTION_525,	/* 4 */
+		V4L2_SLICED_WSS_625, 0,		/* 5 */
+		V4L2_SLICED_VPS, 0, 0, 0, 0,	/* 7 */
+		0, 0, 0, 0
+	};
+	struct v4l2_sliced_vbi_format *sliced = &fmt->fmt.sliced;
+	int i;
+
+	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+		return -EINVAL;
+	memset(sliced, 0, sizeof(*sliced));
+	/* done if using raw VBI */
+	if (saa7115_read(client, 0x80) & 0x10)
+		return 0;
+	for (i = 2; i <= 23; i++) {
+		u8 v = saa7115_read(client, i - 2 + 0x41);
+
+		sliced->service_lines[0][i] = lcr2vbi[v >> 4];
+		sliced->service_lines[1][i] = lcr2vbi[v & 0xf];
+		sliced->service_set |=
+			sliced->service_lines[0][i] | sliced->service_lines[1][i];
+	}
+	return 0;
+}
+
+static int saa7115_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+	struct v4l2_pix_format *pix;
+	int HPSC, HFSC;
+	int VSCY, Vsrc;
+	int is_50hz = state->std & V4L2_STD_625_50;
+
+	if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
+		saa7115_set_lcr(client, &fmt->fmt.sliced);
+		return 0;
+	}
+	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	pix = &(fmt->fmt.pix);
+
+	saa7115_dbg("decoder set size\n");
+
+	/* FIXME need better bounds checking here */
+	if ((pix->width < 1) || (pix->width > 1440))
+		return -EINVAL;
+	if ((pix->height < 1) || (pix->height > 960))
+		return -EINVAL;
+
+	/* probably have a valid size, let's set it */
+	/* Set output width/height */
+	/* width */
+	saa7115_write(client, 0xcc, (u8) (pix->width & 0xff));
+	saa7115_write(client, 0xcd, (u8) ((pix->width >> 8) & 0xff));
+	/* height */
+	saa7115_write(client, 0xce, (u8) (pix->height & 0xff));
+	saa7115_write(client, 0xcf, (u8) ((pix->height >> 8) & 0xff));
+
+	/* Scaling settings */
+	/* Hprescaler is floor(inres/outres) */
+	/* FIXME hardcoding input res */
+	if (pix->width != 720) {
+		HPSC = (int)(720 / pix->width);
+		/* 0 is not allowed (div. by zero) */
+		HPSC = HPSC ? HPSC : 1;
+		HFSC = (int)((1024 * 720) / (HPSC * pix->width));
+
+		saa7115_dbg("Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
+		/* FIXME hardcodes to "Task B"
+		 * write H prescaler integer */
+		saa7115_write(client, 0xd0, (u8) (HPSC & 0x3f));
+
+		/* write H fine-scaling (luminance) */
+		saa7115_write(client, 0xd8, (u8) (HFSC & 0xff));
+		saa7115_write(client, 0xd9, (u8) ((HFSC >> 8) & 0xff));
+		/* write H fine-scaling (chrominance)
+		 * must be lum/2, so i'll just bitshift :) */
+		saa7115_write(client, 0xDC, (u8) ((HFSC >> 1) & 0xff));
+		saa7115_write(client, 0xDD, (u8) ((HFSC >> 9) & 0xff));
+	} else {
+		if (is_50hz) {
+			saa7115_dbg("Setting full 50hz width\n");
+			saa7115_writeregs(client, saa7115_cfg_50hz_fullres_x);
+		} else {
+			saa7115_dbg("Setting full 60hz width\n");
+			saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x);
+		}
+	}
+
+	Vsrc = is_50hz ? 576 : 480;
+
+	if (pix->height != Vsrc) {
+		VSCY = (int)((1024 * Vsrc) / pix->height);
+		saa7115_dbg("Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
+
+		/* Correct Contrast and Luminance */
+		saa7115_write(client, 0xd5, (u8) (64 * 1024 / VSCY));
+		saa7115_write(client, 0xd6, (u8) (64 * 1024 / VSCY));
+
+		/* write V fine-scaling (luminance) */
+		saa7115_write(client, 0xe0, (u8) (VSCY & 0xff));
+		saa7115_write(client, 0xe1, (u8) ((VSCY >> 8) & 0xff));
+		/* write V fine-scaling (chrominance) */
+		saa7115_write(client, 0xe2, (u8) (VSCY & 0xff));
+		saa7115_write(client, 0xe3, (u8) ((VSCY >> 8) & 0xff));
+	} else {
+		if (is_50hz) {
+			saa7115_dbg("Setting full 50Hz height\n");
+			saa7115_writeregs(client, saa7115_cfg_50hz_fullres_y);
+		} else {
+			saa7115_dbg("Setting full 60hz height\n");
+			saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y);
+		}
+	}
+
+	saa7115_writeregs(client, saa7115_cfg_reset_scaler);
+	return 0;
+}
+
+/* Decode the sliced VBI data stream as created by the saa7115.
+   The format is described in the saa7115 datasheet in Tables 25 and 26
+   and in Figure 33.
+   The current implementation uses SAV/EAV codes and not the ancillary data
+   headers. The vbi->p pointer points to the SDID byte right after the SAV
+   code. */
+static void saa7115_decode_vbi_line(struct i2c_client *client,
+				    struct v4l2_decode_vbi_line *vbi)
+{
+	static const char vbi_no_data_pattern[] = {
+		0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0
+	};
+	struct saa7115_state *state = i2c_get_clientdata(client);
+	u8 *p = vbi->p;
+	u32 wss;
+	int id1, id2;   /* the ID1 and ID2 bytes from the internal header */
+
+	vbi->type = 0;  /* mark result as a failure */
+	id1 = p[2];
+	id2 = p[3];
+	/* Note: the field bit is inverted for 60 Hz video */
+	if (state->std & V4L2_STD_525_60)
+		id1 ^= 0x40;
+
+	/* Skip internal header, p now points to the start of the payload */
+	p += 4;
+	vbi->p = p;
+
+	/* calculate field and line number of the VBI packet (1-23) */
+	vbi->is_second_field = ((id1 & 0x40) != 0);
+	vbi->line = (id1 & 0x3f) << 3;
+	vbi->line |= (id2 & 0x70) >> 4;
+
+	/* Obtain data type */
+	id2 &= 0xf;
+
+	/* If the VBI slicer does not detect any signal it will fill up
+	   the payload buffer with 0xa0 bytes. */
+	if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern)))
+		return;
+
+	/* decode payloads */
+	switch (id2) {
+	case 1:
+		vbi->type = V4L2_SLICED_TELETEXT_B;
+		break;
+	case 4:
+		if (!saa7115_odd_parity(p[0]) || !saa7115_odd_parity(p[1]))
+			return;
+		vbi->type = V4L2_SLICED_CAPTION_525;
+		break;
+	case 5:
+		wss = saa7115_decode_wss(p);
+		if (wss == -1)
+			return;
+		p[0] = wss & 0xff;
+		p[1] = wss >> 8;
+		vbi->type = V4L2_SLICED_WSS_625;
+		break;
+	case 7:
+		if (saa7115_decode_vps(p, p) != 0)
+			return;
+		vbi->type = V4L2_SLICED_VPS;
+		break;
+	default:
+		return;
+	}
+}
+
+/* ============ SAA7115 AUDIO settings (end) ============= */
+
+static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+	int *iarg = arg;
+
+	/* ioctls to allow direct access to the saa7115 registers for testing */
+	switch (cmd) {
+	case VIDIOC_S_FMT:
+		return saa7115_set_v4lfmt(client, (struct v4l2_format *)arg);
+
+	case VIDIOC_G_FMT:
+		return saa7115_get_v4lfmt(client, (struct v4l2_format *)arg);
+
+	case VIDIOC_INT_AUDIO_CLOCK_FREQ:
+		return saa7115_set_audio_clock_freq(client, *(enum v4l2_audio_clock_freq *)arg);
+
+	case VIDIOC_G_TUNER:
+	{
+		struct v4l2_tuner *vt = arg;
+		int status;
+
+		status = saa7115_read(client, 0x1f);
+
+		saa7115_dbg("status: 0x%02x\n", status);
+		vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
+		break;
+	}
+
+	case VIDIOC_LOG_STATUS:
+		saa7115_log_status(client);
+		break;
+
+	case VIDIOC_G_CTRL:
+		return saa7115_get_v4lctrl(client, (struct v4l2_control *)arg);
+
+	case VIDIOC_S_CTRL:
+		return saa7115_set_v4lctrl(client, (struct v4l2_control *)arg);
+
+	case VIDIOC_G_STD:
+		*(v4l2_std_id *)arg = saa7115_get_v4lstd(client);
+		break;
+
+	case VIDIOC_S_STD:
+		saa7115_set_v4lstd(client, *(v4l2_std_id *)arg);
+		break;
+
+	case VIDIOC_G_INPUT:
+		*(int *)arg = state->input;
+		break;
+
+	case VIDIOC_S_INPUT:
+		saa7115_dbg("decoder set input %d\n", *iarg);
+		/* inputs from 0-9 are available */
+		if (*iarg < 0 || *iarg > 9) {
+			return -EINVAL;
+		}
+
+		if (state->input == *iarg)
+			break;
+		saa7115_dbg("now setting %s input\n",
+			*iarg >= 6 ? "S-Video" : "Composite");
+		state->input = *iarg;
+
+		/* select mode */
+		saa7115_write(client, 0x02,
+			      (saa7115_read(client, 0x02) & 0xf0) |
+			       state->input);
+
+		/* bypass chrominance trap for modes 6..9 */
+		saa7115_write(client, 0x09,
+			      (saa7115_read(client, 0x09) & 0x7f) |
+			       (state->input < 6 ? 0x0 : 0x80));
+		break;
+
+	case VIDIOC_STREAMON:
+	case VIDIOC_STREAMOFF:
+		saa7115_dbg("%s output\n",
+			(cmd == VIDIOC_STREAMON) ? "enable" : "disable");
+
+		if (state->enable != (cmd == VIDIOC_STREAMON)) {
+			state->enable = (cmd == VIDIOC_STREAMON);
+			saa7115_write(client, 0x87, state->enable);
+		}
+		break;
+
+	case VIDIOC_INT_DECODE_VBI_LINE:
+		saa7115_decode_vbi_line(client, arg);
+		break;
+
+	case VIDIOC_INT_RESET:
+		saa7115_dbg("decoder RESET\n");
+		saa7115_writeregs(client, saa7115_cfg_reset_scaler);
+		break;
+
+	case VIDIOC_INT_G_VBI_DATA:
+	{
+		struct v4l2_sliced_vbi_data *data = arg;
+
+		switch (data->id) {
+		case V4L2_SLICED_WSS_625:
+			if (saa7115_read(client, 0x6b) & 0xc0)
+				return -EIO;
+			data->data[0] = saa7115_read(client, 0x6c);
+			data->data[1] = saa7115_read(client, 0x6d);
+			return 0;
+		case V4L2_SLICED_CAPTION_525:
+			if (data->field == 0) {
+				/* CC */
+				if (saa7115_read(client, 0x66) & 0xc0)
+					return -EIO;
+				data->data[0] = saa7115_read(client, 0x67);
+				data->data[1] = saa7115_read(client, 0x68);
+				return 0;
+			}
+			/* XDS */
+			if (saa7115_read(client, 0x66) & 0x30)
+				return -EIO;
+			data->data[0] = saa7115_read(client, 0x69);
+			data->data[1] = saa7115_read(client, 0x6a);
+			return 0;
+		default:
+			return -EINVAL;
+		}
+		break;
+	}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	case VIDIOC_INT_G_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_SAA711X)
+			return -EINVAL;
+		reg->val = saa7115_read(client, reg->reg & 0xff);
+		break;
+	}
+
+	case VIDIOC_INT_S_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_SAA711X)
+			return -EINVAL;
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		saa7115_write(client, reg->reg & 0xff, reg->val & 0xff);
+		break;
+	}
+#endif
+
+	case VIDIOC_INT_G_CHIP_IDENT:
+		*iarg = state->ident;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_driver i2c_driver_saa7115;
+
+static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct saa7115_state *state;
+	u8 chip_id;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return 0;
+
+	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (client == 0)
+		return -ENOMEM;
+	memset(client, 0, sizeof(struct i2c_client));
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &i2c_driver_saa7115;
+	client->flags = I2C_CLIENT_ALLOW_USE;
+	snprintf(client->name, sizeof(client->name) - 1, "saa7115");
+
+	saa7115_dbg("detecting saa7115 client on address 0x%x\n", address << 1);
+
+	saa7115_write(client, 0, 5);
+	chip_id = saa7115_read(client, 0) & 0x0f;
+	if (chip_id != 4 && chip_id != 5) {
+		saa7115_dbg("saa7115 not found\n");
+		kfree(client);
+		return 0;
+	}
+	if (chip_id == 4) {
+		snprintf(client->name, sizeof(client->name) - 1, "saa7114");
+	}
+	saa7115_info("saa711%d found @ 0x%x (%s)\n", chip_id, address << 1, adapter->name);
+
+	state = kmalloc(sizeof(struct saa7115_state), GFP_KERNEL);
+	i2c_set_clientdata(client, state);
+	if (state == NULL) {
+		kfree(client);
+		return -ENOMEM;
+	}
+	memset(state, 0, sizeof(struct saa7115_state));
+	state->std = V4L2_STD_NTSC;
+	state->input = -1;
+	state->enable = 1;
+	state->bright = 128;
+	state->contrast = 64;
+	state->hue = 0;
+	state->sat = 64;
+	state->ident = (chip_id == 4) ? V4L2_IDENT_SAA7114 : V4L2_IDENT_SAA7115;
+	state->audclk_freq = V4L2_AUDCLK_48_KHZ;
+
+	saa7115_dbg("writing init values\n");
+
+	/* init to 60hz/48khz */
+	saa7115_writeregs(client, saa7115_init_auto_input);
+	saa7115_writeregs(client, saa7115_init_misc);
+	saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x);
+	saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y);
+	saa7115_writeregs(client, saa7115_cfg_60hz_video);
+	saa7115_writeregs(client, saa7115_cfg_48_audio);
+	saa7115_writeregs(client, saa7115_cfg_60hz_48_audio);
+	saa7115_writeregs(client, saa7115_cfg_reset_scaler);
+
+	i2c_attach_client(client);
+
+	saa7115_dbg("status: (1E) 0x%02x, (1F) 0x%02x\n",
+		saa7115_read(client, 0x1e), saa7115_read(client, 0x1f));
+
+	return 0;
+}
+
+static int saa7115_probe(struct i2c_adapter *adapter)
+{
+#ifdef I2C_CLASS_TV_ANALOG
+	if (adapter->class & I2C_CLASS_TV_ANALOG)
+#else
+	if (adapter->id == I2C_HW_B_BT848)
+#endif
+		return i2c_probe(adapter, &addr_data, &saa7115_attach);
+	return 0;
+}
+
+static int saa7115_detach(struct i2c_client *client)
+{
+	struct saa7115_state *state = i2c_get_clientdata(client);
+	int err;
+
+	err = i2c_detach_client(client);
+	if (err) {
+		return err;
+	}
+
+	kfree(state);
+	kfree(client);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver_saa7115 = {
+	.name = "saa7115",
+	.id = I2C_DRIVERID_SAA711X,
+	.flags = I2C_DF_NOTIFY,
+	.attach_adapter = saa7115_probe,
+	.detach_client = saa7115_detach,
+	.command = saa7115_command,
+	.owner = THIS_MODULE,
+};
+
+
+static int __init saa7115_init_module(void)
+{
+	return i2c_add_driver(&i2c_driver_saa7115);
+}
+
+static void __exit saa7115_cleanup_module(void)
+{
+	i2c_del_driver(&i2c_driver_saa7115);
+}
+
+module_init(saa7115_init_module);
+module_exit(saa7115_cleanup_module);
diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c
index 9aa8827de2c..25b30f352d8 100644
--- a/drivers/media/video/saa711x.c
+++ b/drivers/media/video/saa711x.c
@@ -36,7 +36,6 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <linux/sched.h>
-#include <asm/segment.h>
 #include <linux/types.h>
 #include <asm/uaccess.h>
 #include <linux/videodev.h>
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
new file mode 100644
index 00000000000..843431f10e3
--- /dev/null
+++ b/drivers/media/video/saa7127.c
@@ -0,0 +1,849 @@
+/*
+ * saa7127 - Philips SAA7127/SAA7129 video encoder driver
+ *
+ * Copyright (C) 2003 Roy Bulter <rbulter@hetnet.nl>
+ *
+ * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter
+ *
+ * Copyright (C) 2000-2001 Gillem <htoa@gmx.net>
+ * Copyright (C) 2002 Andreas Oberritter <obi@saftware.de>
+ *
+ * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo
+ *
+ * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
+ *
+ * This driver is designed for the Hauppauge 250/350 Linux driver
+ * from the ivtv Project
+ *
+ * Copyright (C) 2003 Kevin Thayer <nufan_wfk@yahoo.com>
+ *
+ * Dual output support:
+ * Copyright (C) 2004 Eric Varsanyi
+ *
+ * NTSC Tuning and 7.5 IRE Setup
+ * Copyright (C) 2004  Chris Kennedy <c@groovy.org>
+ *
+ * VBI additions & cleanup:
+ * Copyright (C) 2004, 2005 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * Note: the saa7126 is identical to the saa7127, and the saa7128 is
+ * identical to the saa7129, except that the saa7126 and saa7128 have
+ * macrovision anti-taping support. This driver will almost certainly
+ * work find for those chips, except of course for the missing anti-taping
+ * support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+
+static int debug = 0;
+static int test_image = 0;
+
+MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver");
+MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
+MODULE_LICENSE("GPL");
+module_param(debug, int, 0644);
+module_param(test_image, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+MODULE_PARM_DESC(test_image, "test_image (0-1)");
+
+#define saa7127_dbg(fmt, arg...) \
+	do { \
+		if (debug >= 1) \
+			printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+			       i2c_adapter_id(client->adapter), client->addr , ## arg); \
+	} while (0)
+
+/* High volume debug. Use with care. */
+#define saa7127_dbg_highvol(fmt, arg...) \
+	do { \
+		if (debug == 2) \
+			printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+			       i2c_adapter_id(client->adapter), client->addr , ## arg); \
+	} while (0)
+
+#define saa7127_err(fmt, arg...) do { \
+	printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+	       i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+#define saa7127_info(fmt, arg...) do { \
+	printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+	       i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+
+static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+/*
+ * SAA7127 registers
+ */
+
+#define SAA7127_REG_STATUS                           0x00
+#define SAA7127_REG_WIDESCREEN_CONFIG                0x26
+#define SAA7127_REG_WIDESCREEN_ENABLE                0x27
+#define SAA7127_REG_BURST_START                      0x28
+#define SAA7127_REG_BURST_END                        0x29
+#define SAA7127_REG_COPYGEN_0                        0x2a
+#define SAA7127_REG_COPYGEN_1                        0x2b
+#define SAA7127_REG_COPYGEN_2                        0x2c
+#define SAA7127_REG_OUTPUT_PORT_CONTROL              0x2d
+#define SAA7127_REG_GAIN_LUMINANCE_RGB               0x38
+#define SAA7127_REG_GAIN_COLORDIFF_RGB               0x39
+#define SAA7127_REG_INPUT_PORT_CONTROL_1             0x3a
+#define SAA7129_REG_FADE_KEY_COL2		     0x4f
+#define SAA7127_REG_CHROMA_PHASE                     0x5a
+#define SAA7127_REG_GAINU                            0x5b
+#define SAA7127_REG_GAINV                            0x5c
+#define SAA7127_REG_BLACK_LEVEL                      0x5d
+#define SAA7127_REG_BLANKING_LEVEL                   0x5e
+#define SAA7127_REG_VBI_BLANKING                     0x5f
+#define SAA7127_REG_DAC_CONTROL                      0x61
+#define SAA7127_REG_BURST_AMP                        0x62
+#define SAA7127_REG_SUBC3                            0x63
+#define SAA7127_REG_SUBC2                            0x64
+#define SAA7127_REG_SUBC1                            0x65
+#define SAA7127_REG_SUBC0                            0x66
+#define SAA7127_REG_LINE_21_ODD_0                    0x67
+#define SAA7127_REG_LINE_21_ODD_1                    0x68
+#define SAA7127_REG_LINE_21_EVEN_0                   0x69
+#define SAA7127_REG_LINE_21_EVEN_1                   0x6a
+#define SAA7127_REG_RCV_PORT_CONTROL                 0x6b
+#define SAA7127_REG_VTRIG                            0x6c
+#define SAA7127_REG_HTRIG_HI                         0x6d
+#define SAA7127_REG_MULTI                            0x6e
+#define SAA7127_REG_CLOSED_CAPTION                   0x6f
+#define SAA7127_REG_RCV2_OUTPUT_START                0x70
+#define SAA7127_REG_RCV2_OUTPUT_END                  0x71
+#define SAA7127_REG_RCV2_OUTPUT_MSBS                 0x72
+#define SAA7127_REG_TTX_REQUEST_H_START              0x73
+#define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH       0x74
+#define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT        0x75
+#define SAA7127_REG_TTX_ODD_REQ_VERT_START           0x76
+#define SAA7127_REG_TTX_ODD_REQ_VERT_END             0x77
+#define SAA7127_REG_TTX_EVEN_REQ_VERT_START          0x78
+#define SAA7127_REG_TTX_EVEN_REQ_VERT_END            0x79
+#define SAA7127_REG_FIRST_ACTIVE                     0x7a
+#define SAA7127_REG_LAST_ACTIVE                      0x7b
+#define SAA7127_REG_MSB_VERTICAL                     0x7c
+#define SAA7127_REG_DISABLE_TTX_LINE_LO_0            0x7e
+#define SAA7127_REG_DISABLE_TTX_LINE_LO_1            0x7f
+
+/*
+ **********************************************************************
+ *
+ *  Arrays with configuration parameters for the SAA7127
+ *
+ **********************************************************************
+ */
+
+struct i2c_reg_value {
+	unsigned char reg;
+	unsigned char value;
+};
+
+static const struct i2c_reg_value saa7129_init_config_extra[] = {
+	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x38 },
+	{ SAA7127_REG_VTRIG, 				0xfa },
+};
+
+static const struct i2c_reg_value saa7127_init_config_common[] = {
+	{ SAA7127_REG_WIDESCREEN_CONFIG, 		0x0d },
+	{ SAA7127_REG_WIDESCREEN_ENABLE, 		0x00 },
+	{ SAA7127_REG_COPYGEN_0, 			0x77 },
+	{ SAA7127_REG_COPYGEN_1, 			0x41 },
+	{ SAA7127_REG_COPYGEN_2, 			0x00 },	/* Macrovision enable/disable */
+	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x9e },
+	{ SAA7127_REG_GAIN_LUMINANCE_RGB, 		0x00 },
+	{ SAA7127_REG_GAIN_COLORDIFF_RGB, 		0x00 },
+	{ SAA7127_REG_INPUT_PORT_CONTROL_1, 		0x80 },	/* for color bars */
+	{ SAA7127_REG_LINE_21_ODD_0, 			0x77 },
+	{ SAA7127_REG_LINE_21_ODD_1, 			0x41 },
+	{ SAA7127_REG_LINE_21_EVEN_0, 			0x88 },
+	{ SAA7127_REG_LINE_21_EVEN_1, 			0x41 },
+	{ SAA7127_REG_RCV_PORT_CONTROL, 		0x12 },
+	{ SAA7127_REG_VTRIG, 				0xf9 },
+	{ SAA7127_REG_HTRIG_HI, 			0x00 },
+	{ SAA7127_REG_RCV2_OUTPUT_START, 		0x41 },
+	{ SAA7127_REG_RCV2_OUTPUT_END, 			0xc3 },
+	{ SAA7127_REG_RCV2_OUTPUT_MSBS, 		0x00 },
+	{ SAA7127_REG_TTX_REQUEST_H_START, 		0x3e },
+	{ SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH, 	0xb8 },
+	{ SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT,  	0x03 },
+	{ SAA7127_REG_TTX_ODD_REQ_VERT_START, 		0x15 },
+	{ SAA7127_REG_TTX_ODD_REQ_VERT_END, 		0x16 },
+	{ SAA7127_REG_TTX_EVEN_REQ_VERT_START, 		0x15 },
+	{ SAA7127_REG_TTX_EVEN_REQ_VERT_END, 		0x16 },
+	{ SAA7127_REG_FIRST_ACTIVE, 			0x1a },
+	{ SAA7127_REG_LAST_ACTIVE, 			0x01 },
+	{ SAA7127_REG_MSB_VERTICAL, 			0xc0 },
+	{ SAA7127_REG_DISABLE_TTX_LINE_LO_0, 		0x00 },
+	{ SAA7127_REG_DISABLE_TTX_LINE_LO_1, 		0x00 },
+	{ 0, 0 }
+};
+
+#define SAA7127_60HZ_DAC_CONTROL 0x15
+static const struct i2c_reg_value saa7127_init_config_60hz[] = {
+	{ SAA7127_REG_BURST_START, 			0x19 },
+	/* BURST_END is also used as a chip ID in saa7127_detect_client */
+	{ SAA7127_REG_BURST_END, 			0x1d },
+	{ SAA7127_REG_CHROMA_PHASE, 			0xa3 },
+	{ SAA7127_REG_GAINU, 				0x98 },
+	{ SAA7127_REG_GAINV, 				0xd3 },
+	{ SAA7127_REG_BLACK_LEVEL, 			0x39 },
+	{ SAA7127_REG_BLANKING_LEVEL, 			0x2e },
+	{ SAA7127_REG_VBI_BLANKING, 			0x2e },
+	{ SAA7127_REG_DAC_CONTROL, 			0x15 },
+	{ SAA7127_REG_BURST_AMP, 			0x4d },
+	{ SAA7127_REG_SUBC3, 				0x1f },
+	{ SAA7127_REG_SUBC2, 				0x7c },
+	{ SAA7127_REG_SUBC1, 				0xf0 },
+	{ SAA7127_REG_SUBC0, 				0x21 },
+	{ SAA7127_REG_MULTI, 				0x90 },
+	{ SAA7127_REG_CLOSED_CAPTION, 			0x11 },
+	{ 0, 0 }
+};
+
+#define SAA7127_50HZ_DAC_CONTROL 0x02
+struct i2c_reg_value saa7127_init_config_50hz[] = {
+	{ SAA7127_REG_BURST_START, 			0x21 },
+	/* BURST_END is also used as a chip ID in saa7127_detect_client */
+	{ SAA7127_REG_BURST_END, 			0x1d },
+	{ SAA7127_REG_CHROMA_PHASE, 			0x3f },
+	{ SAA7127_REG_GAINU, 				0x7d },
+	{ SAA7127_REG_GAINV, 				0xaf },
+	{ SAA7127_REG_BLACK_LEVEL, 			0x33 },
+	{ SAA7127_REG_BLANKING_LEVEL, 			0x35 },
+	{ SAA7127_REG_VBI_BLANKING, 			0x35 },
+	{ SAA7127_REG_DAC_CONTROL, 			0x02 },
+	{ SAA7127_REG_BURST_AMP, 			0x2f },
+	{ SAA7127_REG_SUBC3, 				0xcb },
+	{ SAA7127_REG_SUBC2, 				0x8a },
+	{ SAA7127_REG_SUBC1, 				0x09 },
+	{ SAA7127_REG_SUBC0, 				0x2a },
+	{ SAA7127_REG_MULTI, 				0xa0 },
+	{ SAA7127_REG_CLOSED_CAPTION, 			0x00 },
+	{ 0, 0 }
+};
+
+/* Enumeration for the Supported input types */
+enum saa7127_input_type {
+	SAA7127_INPUT_TYPE_NORMAL,
+	SAA7127_INPUT_TYPE_TEST_IMAGE
+};
+
+/* Enumeration for the Supported Output signal types */
+enum saa7127_output_type {
+	SAA7127_OUTPUT_TYPE_BOTH,
+	SAA7127_OUTPUT_TYPE_COMPOSITE,
+	SAA7127_OUTPUT_TYPE_SVIDEO,
+	SAA7127_OUTPUT_TYPE_RGB,
+	SAA7127_OUTPUT_TYPE_YUV_C,
+	SAA7127_OUTPUT_TYPE_YUV_V
+};
+
+/*
+ **********************************************************************
+ *
+ *  Encoder Struct, holds the configuration state of the encoder
+ *
+ **********************************************************************
+ */
+
+struct saa7127_state {
+	v4l2_std_id std;
+	enum v4l2_chip_ident ident;
+	enum saa7127_input_type input_type;
+	enum saa7127_output_type output_type;
+	int video_enable;
+	int wss_enable;
+	u16 wss_mode;
+	int cc_enable;
+	u16 cc_data;
+	int xds_enable;
+	u16 xds_data;
+	int vps_enable;
+	u8 vps_data[5];
+	u8 reg_2d;
+	u8 reg_3a;
+	u8 reg_3a_cb;   /* colorbar bit */
+	u8 reg_61;
+};
+
+static const char * const output_strs[] =
+{
+	"S-Video + Composite",
+	"Composite",
+	"S-Video",
+	"RGB",
+	"YUV C",
+	"YUV V"
+};
+
+static const char * const wss_strs[] = {
+	"invalid",
+	"letterbox 14:9 center",
+	"letterbox 14:9 top",
+	"invalid",
+	"letterbox 16:9 top",
+	"invalid",
+	"invalid",
+	"16:9 full format anamorphic"
+	"4:3 full format",
+	"invalid",
+	"invalid",
+	"letterbox 16:9 center",
+	"invalid",
+	"letterbox >16:9 center",
+	"14:9 full format center",
+	"invalid",
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_read(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (i2c_smbus_write_byte_data(client, reg, val) == 0)
+			return 0;
+	}
+	saa7127_err("I2C Write Problem\n");
+	return -1;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_write_inittab(struct i2c_client *client,
+				 const struct i2c_reg_value *regs)
+{
+	while (regs->reg != 0) {
+		saa7127_write(client, regs->reg, regs->value);
+		regs++;
+	}
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_vps(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 0 || data->line != 16))
+		return -EINVAL;
+	if (state->vps_enable != enable) {
+		saa7127_dbg("Turn VPS Signal %s\n", enable ? "on" : "off");
+		saa7127_write(client, 0x54, enable << 7);
+		state->vps_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	state->vps_data[0] = data->data[4];
+	state->vps_data[1] = data->data[10];
+	state->vps_data[2] = data->data[11];
+	state->vps_data[3] = data->data[12];
+	state->vps_data[4] = data->data[13];
+	saa7127_dbg("Set VPS data %02x %02x %02x %02x %02x\n",
+		state->vps_data[0], state->vps_data[1],
+		state->vps_data[2], state->vps_data[3],
+		state->vps_data[4]);
+	saa7127_write(client, 0x55, state->vps_data[0]);
+	saa7127_write(client, 0x56, state->vps_data[1]);
+	saa7127_write(client, 0x57, state->vps_data[2]);
+	saa7127_write(client, 0x58, state->vps_data[3]);
+	saa7127_write(client, 0x59, state->vps_data[4]);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_cc(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+	u16 cc = data->data[0] << 8 | data->data[1];
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 0 || data->line != 21))
+		return -EINVAL;
+	if (state->cc_enable != enable) {
+		saa7127_dbg("Turn CC %s\n", enable ? "on" : "off");
+		saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
+				(enable << 6) | 0x11);
+		state->cc_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	saa7127_dbg_highvol("CC data: %04x\n", cc);
+	saa7127_write(client, SAA7127_REG_LINE_21_ODD_0, cc & 0xff);
+	saa7127_write(client, SAA7127_REG_LINE_21_ODD_1, cc >> 8);
+	state->cc_data = cc;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_xds(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+	u16 xds = data->data[1] << 8 | data->data[0];
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 1 || data->line != 21))
+		return -EINVAL;
+	if (state->xds_enable != enable) {
+		saa7127_dbg("Turn XDS %s\n", enable ? "on" : "off");
+		saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
+				(enable << 7) | 0x11);
+		state->xds_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	saa7127_dbg_highvol("XDS data: %04x\n", xds);
+	saa7127_write(client, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff);
+	saa7127_write(client, SAA7127_REG_LINE_21_EVEN_1, xds >> 8);
+	state->xds_data = xds;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_wss(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 0 || data->line != 23))
+		return -EINVAL;
+	if (state->wss_enable != enable) {
+		saa7127_dbg("Turn WSS %s\n", enable ? "on" : "off");
+		saa7127_write(client, 0x27, enable << 7);
+		state->wss_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	saa7127_write(client, 0x26, data->data[0]);
+	saa7127_write(client, 0x27, 0x80 | (data->data[1] & 0x3f));
+	saa7127_dbg("WSS mode: %s\n", wss_strs[data->data[0] & 0xf]);
+	state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0];
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_video_enable(struct i2c_client *client, int enable)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+
+	if (enable) {
+		saa7127_dbg("Enable Video Output\n");
+		saa7127_write(client, 0x2d, state->reg_2d);
+		saa7127_write(client, 0x61, state->reg_61);
+	} else {
+		saa7127_dbg("Disable Video Output\n");
+		saa7127_write(client, 0x2d, (state->reg_2d & 0xf0));
+		saa7127_write(client, 0x61, (state->reg_61 | 0xc0));
+	}
+	state->video_enable = enable;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_std(struct i2c_client *client, v4l2_std_id std)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+	const struct i2c_reg_value *inittab;
+
+	if (std & V4L2_STD_525_60) {
+		saa7127_dbg("Selecting 60 Hz video Standard\n");
+		inittab = saa7127_init_config_60hz;
+		state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
+	} else {
+		saa7127_dbg("Selecting 50 Hz video Standard\n");
+		inittab = saa7127_init_config_50hz;
+		state->reg_61 = SAA7127_50HZ_DAC_CONTROL;
+	}
+
+	/* Write Table */
+	saa7127_write_inittab(client, inittab);
+	state->std = std;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_output_type(struct i2c_client *client, int output)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+
+	switch (output) {
+	case SAA7127_OUTPUT_TYPE_RGB:
+		state->reg_2d = 0x0f;	/* RGB + CVBS (for sync) */
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_COMPOSITE:
+		state->reg_2d = 0x08;	/* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_SVIDEO:
+		state->reg_2d = 0xff;	/* 11111111  croma -> R, luma -> CVBS + G + B */
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_YUV_V:
+		state->reg_2d = 0x4f;	/* reg 2D = 01001111, all DAC's on, RGB + VBS */
+		state->reg_3a = 0x0b;	/* reg 3A = 00001011, bypass RGB-matrix */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_YUV_C:
+		state->reg_2d = 0x0f;	/* reg 2D = 00001111, all DAC's on, RGB + CVBS */
+		state->reg_3a = 0x0b;	/* reg 3A = 00001011, bypass RGB-matrix */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_BOTH:
+		state->reg_2d = 0xbf;
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	saa7127_dbg("Selecting %s output type\n", output_strs[output]);
+
+	/* Configure Encoder */
+	saa7127_write(client, 0x2d, state->reg_2d);
+	saa7127_write(client, 0x3a, state->reg_3a | state->reg_3a_cb);
+	state->output_type = output;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_input_type(struct i2c_client *client, int input)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+
+	switch (input) {
+	case SAA7127_INPUT_TYPE_NORMAL:	/* avia */
+		saa7127_dbg("Selecting Normal Encoder Input\n");
+		state->reg_3a_cb = 0;
+		break;
+
+	case SAA7127_INPUT_TYPE_TEST_IMAGE:	/* color bar */
+		saa7127_dbg("Selecting Color Bar generator\n");
+		state->reg_3a_cb = 0x80;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	saa7127_write(client, 0x3a, state->reg_3a | state->reg_3a_cb);
+	state->input_type = input;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_command(struct i2c_client *client,
+			   unsigned int cmd, void *arg)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+	struct v4l2_format *fmt = arg;
+	int *iarg = arg;
+
+	switch (cmd) {
+	case VIDIOC_S_STD:
+		if (state->std == *(v4l2_std_id *)arg)
+			break;
+		return saa7127_set_std(client, *(v4l2_std_id *)arg);
+
+	case VIDIOC_G_STD:
+		*(v4l2_std_id *)arg = state->std;
+		break;
+
+	case VIDIOC_S_INPUT:
+		if (state->input_type == *iarg)
+			break;
+		return saa7127_set_input_type(client, *iarg);
+
+	case VIDIOC_S_OUTPUT:
+		if (state->output_type == *iarg)
+			break;
+		return saa7127_set_output_type(client, *iarg);
+
+	case VIDIOC_STREAMON:
+	case VIDIOC_STREAMOFF:
+		if (state->video_enable == (cmd == VIDIOC_STREAMON))
+			break;
+		return saa7127_set_video_enable(client, cmd == VIDIOC_STREAMON);
+
+	case VIDIOC_G_FMT:
+		if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+			return -EINVAL;
+
+		memset(&fmt->fmt.sliced, 0, sizeof(fmt->fmt.sliced));
+		if (state->vps_enable)
+			fmt->fmt.sliced.service_lines[0][16] = V4L2_SLICED_VPS;
+		if (state->wss_enable)
+			fmt->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625;
+		if (state->cc_enable) {
+			fmt->fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525;
+			fmt->fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525;
+		}
+		fmt->fmt.sliced.service_set =
+			(state->vps_enable ? V4L2_SLICED_VPS : 0) |
+			(state->wss_enable ? V4L2_SLICED_WSS_625 : 0) |
+			(state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0);
+		break;
+
+	case VIDIOC_LOG_STATUS:
+		saa7127_info("Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz");
+		saa7127_info("Input:    %s\n", state->input_type ?  "color bars" : "normal");
+		saa7127_info("Output:   %s\n", state->video_enable ?
+			output_strs[state->output_type] : "disabled");
+		saa7127_info("WSS:      %s\n", state->wss_enable ?
+			wss_strs[state->wss_mode] : "disabled");
+		saa7127_info("VPS:      %s\n", state->vps_enable ? "enabled" : "disabled");
+		saa7127_info("CC:       %s\n", state->cc_enable ? "enabled" : "disabled");
+		break;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	case VIDIOC_INT_G_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_SAA7127)
+			return -EINVAL;
+		reg->val = saa7127_read(client, reg->reg & 0xff);
+		break;
+	}
+
+	case VIDIOC_INT_S_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_SAA7127)
+			return -EINVAL;
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		saa7127_write(client, reg->reg & 0xff, reg->val & 0xff);
+		break;
+	}
+#endif
+
+	case VIDIOC_INT_S_VBI_DATA:
+	{
+		struct v4l2_sliced_vbi_data *data = arg;
+
+		switch (data->id) {
+			case V4L2_SLICED_WSS_625:
+				return saa7127_set_wss(client, data);
+			case V4L2_SLICED_VPS:
+				return saa7127_set_vps(client, data);
+			case V4L2_SLICED_CAPTION_525:
+				if (data->field == 0)
+					return saa7127_set_cc(client, data);
+				return saa7127_set_xds(client, data);
+			default:
+				return -EINVAL;
+		}
+		break;
+	}
+
+	case VIDIOC_INT_G_CHIP_IDENT:
+		*(enum v4l2_chip_ident *)arg = state->ident;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+struct i2c_driver i2c_driver_saa7127;
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct saa7127_state *state;
+	struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 };  /* set to disabled */
+	int read_result = 0;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return 0;
+
+	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (client == 0)
+		return -ENOMEM;
+
+	memset(client, 0, sizeof(struct i2c_client));
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &i2c_driver_saa7127;
+	client->flags = I2C_CLIENT_ALLOW_USE;
+	snprintf(client->name, sizeof(client->name) - 1, "saa7127");
+
+	saa7127_dbg("detecting saa7127 client on address 0x%x\n", address << 1);
+
+	/* First test register 0: Bits 5-7 are a version ID (should be 0),
+	   and bit 2 should also be 0.
+	   This is rather general, so the second test is more specific and
+	   looks at the 'ending point of burst in clock cycles' which is
+	   0x1d after a reset and not expected to ever change. */
+	if ((saa7127_read(client, 0) & 0xe4) != 0 ||
+			(saa7127_read(client, 0x29) & 0x3f) != 0x1d) {
+		saa7127_dbg("saa7127 not found\n");
+		kfree(client);
+		return 0;
+	}
+	state = kmalloc(sizeof(struct saa7127_state), GFP_KERNEL);
+
+	if (state == NULL) {
+		kfree(client);
+		return (-ENOMEM);
+	}
+
+	i2c_set_clientdata(client, state);
+	memset(state, 0, sizeof(struct saa7127_state));
+
+	/* Configure Encoder */
+
+	saa7127_dbg("Configuring encoder\n");
+	saa7127_write_inittab(client, saa7127_init_config_common);
+	saa7127_set_std(client, V4L2_STD_NTSC);
+	saa7127_set_output_type(client, SAA7127_OUTPUT_TYPE_BOTH);
+	saa7127_set_vps(client, &vbi);
+	saa7127_set_wss(client, &vbi);
+	saa7127_set_cc(client, &vbi);
+	saa7127_set_xds(client, &vbi);
+	if (test_image == 1) {
+		/* The Encoder has an internal Colorbar generator */
+		/* This can be used for debugging */
+		saa7127_set_input_type(client, SAA7127_INPUT_TYPE_TEST_IMAGE);
+	} else {
+		saa7127_set_input_type(client, SAA7127_INPUT_TYPE_NORMAL);
+	}
+	saa7127_set_video_enable(client, 1);
+
+	/* Detect if it's an saa7129 */
+	read_result = saa7127_read(client, SAA7129_REG_FADE_KEY_COL2);
+	saa7127_write(client, SAA7129_REG_FADE_KEY_COL2, 0xaa);
+	if (saa7127_read(client, SAA7129_REG_FADE_KEY_COL2) == 0xaa) {
+		saa7127_info("saa7129 found @ 0x%x (%s)\n", address << 1, adapter->name);
+		saa7127_write(client, SAA7129_REG_FADE_KEY_COL2, read_result);
+		saa7127_write_inittab(client, saa7129_init_config_extra);
+		state->ident = V4L2_IDENT_SAA7129;
+	} else {
+		saa7127_info("saa7127 found @ 0x%x (%s)\n", address << 1, adapter->name);
+		state->ident = V4L2_IDENT_SAA7127;
+	}
+
+	i2c_attach_client(client);
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_probe(struct i2c_adapter *adapter)
+{
+#ifdef I2C_CLASS_TV_ANALOG
+	if (adapter->class & I2C_CLASS_TV_ANALOG)
+#else
+	if (adapter->id == I2C_HW_B_BT848)
+#endif
+		return i2c_probe(adapter, &addr_data, saa7127_attach);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_detach(struct i2c_client *client)
+{
+	struct saa7127_state *state = i2c_get_clientdata(client);
+	int err;
+
+	/* Turn off TV output */
+	saa7127_set_video_enable(client, 0);
+
+	err = i2c_detach_client(client);
+
+	if (err) {
+		return err;
+	}
+
+	kfree(state);
+	kfree(client);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+struct i2c_driver i2c_driver_saa7127 = {
+	.name = "saa7127",
+	.id = I2C_DRIVERID_SAA7127,
+	.flags = I2C_DF_NOTIFY,
+	.attach_adapter = saa7127_probe,
+	.detach_client = saa7127_detach,
+	.command = saa7127_command,
+	.owner = THIS_MODULE,
+};
+
+
+/* ----------------------------------------------------------------------- */
+
+static int __init saa7127_init_module(void)
+{
+	return i2c_add_driver(&i2c_driver_saa7127);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void __exit saa7127_cleanup_module(void)
+{
+	i2c_del_driver(&i2c_driver_saa7127);
+}
+
+/* ----------------------------------------------------------------------- */
+
+module_init(saa7127_init_module);
+module_exit(saa7127_cleanup_module);
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 624e8808a51..7bdeabe638c 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -1,10 +1,11 @@
 config VIDEO_SAA7134
 	tristate "Philips SAA7134 support"
-	depends on VIDEO_DEV && PCI && I2C && SOUND
+	depends on VIDEO_DEV && PCI && I2C && SOUND && SND
 	select VIDEO_BUF
 	select VIDEO_IR
 	select VIDEO_TUNER
 	select CRC32
+	select SND_PCM_OSS
 	---help---
 	  This is a video4linux driver for Philips SAA713x based
 	  TV cards.
diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile
index e0b28f0533a..4226b61cc61 100644
--- a/drivers/media/video/saa7134/Makefile
+++ b/drivers/media/video/saa7134/Makefile
@@ -1,10 +1,11 @@
 
 saa7134-objs :=	saa7134-cards.o saa7134-core.o saa7134-i2c.o	\
-		saa7134-oss.o saa7134-ts.o saa7134-tvaudio.o	\
-		saa7134-vbi.o saa7134-video.o saa7134-input.o
+		saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o    \
+		saa7134-video.o saa7134-input.o
 
 obj-$(CONFIG_VIDEO_SAA7134) +=  saa7134.o saa7134-empress.o \
-				saa6752hs.o saa7134-alsa.o
+				saa6752hs.o saa7134-alsa.o \
+				saa7134-oss.o
 obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o
 
 EXTRA_CFLAGS += -I$(src)/..
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index 4f3c4235432..5707c666660 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -30,7 +30,9 @@
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
+#include <sound/pcm_params.h>
 #include <sound/initval.h>
+#include <linux/interrupt.h>
 
 #include "saa7134.h"
 #include "saa7134-reg.h"
@@ -56,6 +58,8 @@ static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
 
+int position;
+
 #define dprintk(fmt, arg...)    if (debug) \
         printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ## arg)
 
@@ -68,7 +72,7 @@ typedef struct snd_card_saa7134 {
 	int mixer_volume[MIXER_ADDR_LAST+1][2];
 	int capture_source[MIXER_ADDR_LAST+1][2];
 	struct pci_dev *pci;
-	struct saa7134_dev *saadev;
+	struct saa7134_dev *dev;
 
 	unsigned long iobase;
 	int irq;
@@ -83,12 +87,10 @@ typedef struct snd_card_saa7134 {
  */
 
 typedef struct snd_card_saa7134_pcm {
-	struct saa7134_dev *saadev;
+	struct saa7134_dev *dev;
 
 	spinlock_t lock;
-	unsigned int pcm_size;		/* buffer size */
-	unsigned int pcm_count;		/* bytes per period */
-	unsigned int pcm_bps;		/* bytes per second */
+
 	snd_pcm_substream_t *substream;
 } snd_card_saa7134_pcm_t;
 
@@ -100,13 +102,11 @@ static snd_card_t *snd_saa7134_cards[SNDRV_CARDS];
  *
  *   Called when the capture device is released or the buffer overflows
  *
- *   - Copied verbatim from saa7134-oss's dsp_dma_stop. Can be dropped
- *     if we just share dsp_dma_stop and use it here
+ *   - Copied verbatim from saa7134-oss's dsp_dma_stop.
  *
  */
 
 static void saa7134_dma_stop(struct saa7134_dev *dev)
-
 {
 	dev->dmasound.dma_blk     = -1;
 	dev->dmasound.dma_running = 0;
@@ -118,8 +118,7 @@ static void saa7134_dma_stop(struct saa7134_dev *dev)
  *
  *   Called when preparing the capture device for use
  *
- *   - Copied verbatim from saa7134-oss's dsp_dma_start. Can be dropped
- *     if we just share dsp_dma_start and use it here
+ *   - Copied verbatim from saa7134-oss's dsp_dma_start.
  *
  */
 
@@ -170,9 +169,9 @@ void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status)
 	if (dev->dmasound.read_count >= dev->dmasound.blksize * (dev->dmasound.blocks-2)) {
 		dprintk("irq: overrun [full=%d/%d] - Blocks in %d\n",dev->dmasound.read_count,
 			dev->dmasound.bufsize, dev->dmasound.blocks);
+		spin_unlock(&dev->slock);
 		snd_pcm_stop(dev->dmasound.substream,SNDRV_PCM_STATE_XRUN);
-		saa7134_dma_stop(dev);
-		goto done;
+		return;
 	}
 
 	/* next block addr */
@@ -194,6 +193,7 @@ void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status)
 		snd_pcm_period_elapsed(dev->dmasound.substream);
 		spin_lock(&dev->slock);
 	}
+
  done:
 	spin_unlock(&dev->slock);
 
@@ -209,7 +209,9 @@ void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status)
 
 static irqreturn_t saa7134_alsa_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
-	struct saa7134_dev *dev = (struct saa7134_dev*) dev_id;
+        struct saa7134_dmasound *dmasound = dev_id;
+        struct saa7134_dev *dev = dmasound->priv_data;
+
 	unsigned long report, status;
 	int loop, handled = 0;
 
@@ -248,56 +250,23 @@ static int snd_card_saa7134_capture_trigger(snd_pcm_substream_t * substream,
 					  int cmd)
 {
 	snd_pcm_runtime_t *runtime = substream->runtime;
-	snd_card_saa7134_pcm_t *saapcm = runtime->private_data;
-	struct saa7134_dev *dev=saapcm->saadev;
+	snd_card_saa7134_pcm_t *pcm = runtime->private_data;
+	struct saa7134_dev *dev=pcm->dev;
 	int err = 0;
 
-	spin_lock_irq(&dev->slock);
-        if (cmd == SNDRV_PCM_TRIGGER_START) {
+	spin_lock(&dev->slock);
+	if (cmd == SNDRV_PCM_TRIGGER_START) {
 		/* start dma */
 		saa7134_dma_start(dev);
-        } else if (cmd == SNDRV_PCM_TRIGGER_STOP) {
+	} else if (cmd == SNDRV_PCM_TRIGGER_STOP) {
 		/* stop dma */
 		saa7134_dma_stop(dev);
-        } else {
-                err = -EINVAL;
-        }
-	spin_unlock_irq(&dev->slock);
-
-        return err;
-}
-
-/*
- * DMA buffer config
- *
- *   Sets the values that will later be used as the size of the buffer,
- *  size of the fragments, and total number of fragments.
- *   Must be called during the preparation stage, before memory is
- *  allocated
- *
- *   - Copied verbatim from saa7134-oss. Can be dropped
- *     if we just share dsp_buffer_conf from OSS.
- */
+	} else {
+		err = -EINVAL;
+	}
+	spin_unlock(&dev->slock);
 
-static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks)
-{
-	if (blksize < 0x100)
-		blksize = 0x100;
-	if (blksize > 0x10000)
-		blksize = 0x10000;
-
-	if (blocks < 2)
-		blocks = 2;
-	if ((blksize * blocks) > 1024*1024)
-		blocks = 1024*1024 / blksize;
-
-	dev->dmasound.blocks  = blocks;
-	dev->dmasound.blksize = blksize;
-	dev->dmasound.bufsize = blksize * blocks;
-
-	dprintk("buffer config: %d blocks / %d bytes, %d kB total\n",
-		blocks,blksize,blksize * blocks / 1024);
-	return 0;
+	return err;
 }
 
 /*
@@ -307,16 +276,16 @@ static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks)
  *  ALSA, but I was unable to use ALSA's own DMA, and had to force the
  *  usage of V4L's
  *
- *   - Copied verbatim from saa7134-oss. Can be dropped
- *     if we just share dsp_buffer_init from OSS.
+ *   - Copied verbatim from saa7134-oss.
+ *
  */
 
 static int dsp_buffer_init(struct saa7134_dev *dev)
 {
 	int err;
 
-	if (!dev->dmasound.bufsize)
-		BUG();
+	BUG_ON(!dev->dmasound.bufsize);
+
 	videobuf_dma_init(&dev->dmasound.dma);
 	err = videobuf_dma_init_kernel(&dev->dmasound.dma, PCI_DMA_FROMDEVICE,
 				       (dev->dmasound.bufsize + PAGE_SIZE) >> PAGE_SHIFT);
@@ -326,6 +295,28 @@ static int dsp_buffer_init(struct saa7134_dev *dev)
 }
 
 /*
+ * DMA buffer release
+ *
+ *   Called after closing the device, during snd_card_saa7134_capture_close
+ *
+ */
+
+static int dsp_buffer_free(struct saa7134_dev *dev)
+{
+	if (!dev->dmasound.blksize)
+		BUG();
+
+	videobuf_dma_free(&dev->dmasound.dma);
+
+	dev->dmasound.blocks  = 0;
+	dev->dmasound.blksize = 0;
+	dev->dmasound.bufsize = 0;
+
+       return 0;
+}
+
+
+/*
  * ALSA PCM preparation
  *
  *   - One of the ALSA capture callbacks.
@@ -340,84 +331,30 @@ static int dsp_buffer_init(struct saa7134_dev *dev)
 static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream)
 {
 	snd_pcm_runtime_t *runtime = substream->runtime;
-	int err, bswap, sign;
+	int bswap, sign;
 	u32 fmt, control;
 	snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
 	struct saa7134_dev *dev;
-	snd_card_saa7134_pcm_t *saapcm = runtime->private_data;
-	unsigned int bps;
-	unsigned long size;
-	unsigned count;
-
-	size = snd_pcm_lib_buffer_bytes(substream);
-	count = snd_pcm_lib_period_bytes(substream);
-
-	saapcm->saadev->dmasound.substream = substream;
-	bps = runtime->rate * runtime->channels;
-	bps *= snd_pcm_format_width(runtime->format);
-	bps /= 8;
-	if (bps <= 0)
-		return -EINVAL;
-	saapcm->pcm_bps = bps;
-	saapcm->pcm_size = snd_pcm_lib_buffer_bytes(substream);
-	saapcm->pcm_count = snd_pcm_lib_period_bytes(substream);
-
+	snd_card_saa7134_pcm_t *pcm = runtime->private_data;
 
-	dev=saa7134->saadev;
+	pcm->dev->dmasound.substream = substream;
 
-	dsp_buffer_conf(dev,saapcm->pcm_count,(saapcm->pcm_size/saapcm->pcm_count));
+	dev = saa7134->dev;
 
-	err = dsp_buffer_init(dev);
-	if (0 != err)
-		goto fail2;
-
-	/* prepare buffer */
-	if (0 != (err = videobuf_dma_pci_map(dev->pci,&dev->dmasound.dma)))
-		return err;
-	if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt)))
-		goto fail1;
-	if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->dmasound.pt,
-					      dev->dmasound.dma.sglist,
-					      dev->dmasound.dma.sglen,
-					      0)))
-		goto fail2;
-
-
-
-	switch (runtime->format) {
-	  case SNDRV_PCM_FORMAT_U8:
-	  case SNDRV_PCM_FORMAT_S8:
+	if (snd_pcm_format_width(runtime->format) == 8)
 		fmt = 0x00;
-		break;
-	  case SNDRV_PCM_FORMAT_U16_LE:
-	  case SNDRV_PCM_FORMAT_U16_BE:
-	  case SNDRV_PCM_FORMAT_S16_LE:
-	  case SNDRV_PCM_FORMAT_S16_BE:
+	else
 		fmt = 0x01;
-		break;
-	  default:
-		err = -EINVAL;
-		return 1;
-	}
 
-	switch (runtime->format) {
-	  case SNDRV_PCM_FORMAT_S8:
-	  case SNDRV_PCM_FORMAT_S16_LE:
-	  case SNDRV_PCM_FORMAT_S16_BE:
+	if (snd_pcm_format_signed(runtime->format))
 		sign = 1;
-		break;
-	  default:
+	else
 		sign = 0;
-		break;
-	}
 
-	switch (runtime->format) {
-	  case SNDRV_PCM_FORMAT_U16_BE:
-	  case SNDRV_PCM_FORMAT_S16_BE:
-		bswap = 1; break;
-	  default:
-		bswap = 0; break;
-	}
+	if (snd_pcm_format_big_endian(runtime->format))
+		bswap = 1;
+	else
+		bswap = 0;
 
 	switch (dev->pci->device) {
 	  case PCI_DEVICE_ID_PHILIPS_SAA7134:
@@ -445,7 +382,6 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream)
 			fmt |= 0x04;
 		saa_writel(SAA7133_NUM_SAMPLES, dev->dmasound.blksize -1);
 		saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210 | (fmt << 24));
-		//saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210);
 		break;
 	}
 
@@ -459,12 +395,6 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream)
 	if (bswap)
 		control |= SAA7134_RS_CONTROL_BSWAP;
 
-	/* I should be able to use runtime->dma_addr in the control
-	   byte, but it doesn't work. So I allocate the DMA using the
-	   V4L functions, and force ALSA to use that as the DMA area */
-
-	runtime->dma_area = dev->dmasound.dma.vmalloc;
-
 	saa_writel(SAA7134_RS_BA1(6),0);
 	saa_writel(SAA7134_RS_BA2(6),dev->dmasound.blksize);
 	saa_writel(SAA7134_RS_PITCH(6),0);
@@ -473,12 +403,6 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream)
 	dev->dmasound.rate = runtime->rate;
 
 	return 0;
- fail2:
-	saa7134_pgtable_free(dev->pci,&dev->dmasound.pt);
- fail1:
-	videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma);
-	return err;
-
 
 }
 
@@ -496,10 +420,8 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream)
 static snd_pcm_uframes_t snd_card_saa7134_capture_pointer(snd_pcm_substream_t * substream)
 {
 	snd_pcm_runtime_t *runtime = substream->runtime;
-	snd_card_saa7134_pcm_t *saapcm = runtime->private_data;
-	struct saa7134_dev *dev=saapcm->saadev;
-
-
+	snd_card_saa7134_pcm_t *pcm = runtime->private_data;
+	struct saa7134_dev *dev=pcm->dev;
 
 	if (dev->dmasound.read_count) {
 		dev->dmasound.read_count  -= snd_pcm_lib_period_bytes(substream);
@@ -540,9 +462,9 @@ static snd_pcm_hardware_t snd_card_saa7134_capture =
 
 static void snd_card_saa7134_runtime_free(snd_pcm_runtime_t *runtime)
 {
-	snd_card_saa7134_pcm_t *saapcm = runtime->private_data;
+	snd_card_saa7134_pcm_t *pcm = runtime->private_data;
 
-	kfree(saapcm);
+	kfree(pcm);
 }
 
 
@@ -552,17 +474,76 @@ static void snd_card_saa7134_runtime_free(snd_pcm_runtime_t *runtime)
  *   - One of the ALSA capture callbacks.
  *
  *   Called on initialization, right before the PCM preparation
- *   Usually used in ALSA to allocate the DMA, but since we don't use the
- *  ALSA DMA it does nothing
  *
  */
 
 static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream,
 				    snd_pcm_hw_params_t * hw_params)
 {
+	snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
+	struct saa7134_dev *dev;
+	unsigned int period_size, periods;
+	int err;
 
-	return 0;
+	period_size = params_period_bytes(hw_params);
+	periods = params_periods(hw_params);
+
+	snd_assert(period_size >= 0x100 && period_size <= 0x10000,
+		   return -EINVAL);
+	snd_assert(periods >= 2, return -EINVAL);
+	snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL);
 
+	dev = saa7134->dev;
+
+	if (dev->dmasound.blocks == periods &&
+	    dev->dmasound.blksize == period_size)
+		return 0;
+
+	/* release the old buffer */
+	if (substream->runtime->dma_area) {
+		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
+		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		dsp_buffer_free(dev);
+		substream->runtime->dma_area = NULL;
+	}
+	dev->dmasound.blocks  = periods;
+	dev->dmasound.blksize = period_size;
+	dev->dmasound.bufsize = period_size * periods;
+
+	err = dsp_buffer_init(dev);
+	if (0 != err) {
+		dev->dmasound.blocks  = 0;
+		dev->dmasound.blksize = 0;
+		dev->dmasound.bufsize = 0;
+		return err;
+	}
+
+	if (0 != (err = videobuf_dma_pci_map(dev->pci, &dev->dmasound.dma))) {
+		dsp_buffer_free(dev);
+		return err;
+	}
+	if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) {
+		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		dsp_buffer_free(dev);
+		return err;
+	}
+	if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->dmasound.pt,
+						dev->dmasound.dma.sglist,
+						dev->dmasound.dma.sglen,
+						0))) {
+		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
+		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		dsp_buffer_free(dev);
+		return err;
+	}
+
+	/* I should be able to use runtime->dma_addr in the control
+	   byte, but it doesn't work. So I allocate the DMA using the
+	   V4L functions, and force ALSA to use that as the DMA area */
+
+	substream->runtime->dma_area = dev->dmasound.dma.vmalloc;
+
+	return 1;
 
 }
 
@@ -572,33 +553,23 @@ static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream,
  *   - One of the ALSA capture callbacks.
  *
  *   Called after closing the device, but before snd_card_saa7134_capture_close
- *   Usually used in ALSA to free the DMA, but since we don't use the
- *  ALSA DMA I'm almost sure this isn't necessary.
+ *   It stops the DMA audio and releases the buffers.
  *
  */
 
 static int snd_card_saa7134_hw_free(snd_pcm_substream_t * substream)
 {
-	return 0;
-}
-
-/*
- * DMA buffer release
- *
- *   Called after closing the device, during snd_card_saa7134_capture_close
- *
- */
-
-static int dsp_buffer_free(struct saa7134_dev *dev)
-{
-	if (!dev->dmasound.blksize)
-		BUG();
+	snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
+	struct saa7134_dev *dev;
 
-	videobuf_dma_free(&dev->dmasound.dma);
+	dev = saa7134->dev;
 
-	dev->dmasound.blocks  = 0;
-	dev->dmasound.blksize = 0;
-	dev->dmasound.bufsize = 0;
+	if (substream->runtime->dma_area) {
+		saa7134_pgtable_free(dev->pci, &dev->dmasound.pt);
+		videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma);
+		dsp_buffer_free(dev);
+		substream->runtime->dma_area = NULL;
+	}
 
 	return 0;
 }
@@ -608,21 +579,12 @@ static int dsp_buffer_free(struct saa7134_dev *dev)
  *
  *   - One of the ALSA capture callbacks.
  *
- *   Called after closing the device. It stops the DMA audio and releases
- *  the buffers
+ *   Called after closing the device.
  *
  */
 
 static int snd_card_saa7134_capture_close(snd_pcm_substream_t * substream)
 {
-	snd_card_saa7134_t *chip = snd_pcm_substream_chip(substream);
-	struct saa7134_dev *dev = chip->saadev;
-
-	/* unlock buffer */
-	saa7134_pgtable_free(dev->pci,&dev->dmasound.pt);
-	videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma);
-
-	dsp_buffer_free(dev);
 	return 0;
 }
 
@@ -639,29 +601,28 @@ static int snd_card_saa7134_capture_close(snd_pcm_substream_t * substream)
 static int snd_card_saa7134_capture_open(snd_pcm_substream_t * substream)
 {
 	snd_pcm_runtime_t *runtime = substream->runtime;
-	snd_card_saa7134_pcm_t *saapcm;
+	snd_card_saa7134_pcm_t *pcm;
 	snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
-	struct saa7134_dev *dev = saa7134->saadev;
+	struct saa7134_dev *dev = saa7134->dev;
 	int err;
 
 	down(&dev->dmasound.lock);
 
-	dev->dmasound.afmt        = SNDRV_PCM_FORMAT_U8;
-	dev->dmasound.channels    = 2;
 	dev->dmasound.read_count  = 0;
 	dev->dmasound.read_offset = 0;
 
 	up(&dev->dmasound.lock);
 
-	saapcm = kzalloc(sizeof(*saapcm), GFP_KERNEL);
-	if (saapcm == NULL)
+	pcm = kzalloc(sizeof(*pcm), GFP_KERNEL);
+	if (pcm == NULL)
 		return -ENOMEM;
-	saapcm->saadev=saa7134->saadev;
 
-	spin_lock_init(&saapcm->lock);
+	pcm->dev=saa7134->dev;
 
-	saapcm->substream = substream;
-	runtime->private_data = saapcm;
+	spin_lock_init(&pcm->lock);
+
+	pcm->substream = substream;
+	runtime->private_data = pcm;
 	runtime->private_free = snd_card_saa7134_runtime_free;
 	runtime->hw = snd_card_saa7134_capture;
 
@@ -736,7 +697,6 @@ static int snd_saa7134_volume_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_
 static int snd_saa7134_volume_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol)
 {
 	snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol);
-	unsigned long flags;
 	int change, addr = kcontrol->private_value;
 	int left, right;
 
@@ -750,12 +710,12 @@ static int snd_saa7134_volume_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_
 		right = 0;
 	if (right > 20)
 		right = 20;
-	spin_lock_irqsave(&chip->mixer_lock, flags);
+	spin_lock_irq(&chip->mixer_lock);
 	change = chip->mixer_volume[addr][0] != left ||
 		 chip->mixer_volume[addr][1] != right;
 	chip->mixer_volume[addr][0] = left;
 	chip->mixer_volume[addr][1] = right;
-	spin_unlock_irqrestore(&chip->mixer_lock, flags);
+	spin_unlock_irq(&chip->mixer_lock);
 	return change;
 }
 
@@ -777,38 +737,37 @@ static int snd_saa7134_capsrc_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_
 static int snd_saa7134_capsrc_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol)
 {
 	snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol);
-	unsigned long flags;
 	int addr = kcontrol->private_value;
 
-	spin_lock_irqsave(&chip->mixer_lock, flags);
+	spin_lock_irq(&chip->mixer_lock);
 	ucontrol->value.integer.value[0] = chip->capture_source[addr][0];
 	ucontrol->value.integer.value[1] = chip->capture_source[addr][1];
-	spin_unlock_irqrestore(&chip->mixer_lock, flags);
+	spin_unlock_irq(&chip->mixer_lock);
+
 	return 0;
 }
 
 static int snd_saa7134_capsrc_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol)
 {
 	snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol);
-	unsigned long flags;
 	int change, addr = kcontrol->private_value;
 	int left, right;
 	u32 anabar, xbarin;
 	int analog_io, rate;
 	struct saa7134_dev *dev;
 
-	dev = chip->saadev;
+	dev = chip->dev;
 
 	left = ucontrol->value.integer.value[0] & 1;
 	right = ucontrol->value.integer.value[1] & 1;
-	spin_lock_irqsave(&chip->mixer_lock, flags);
+	spin_lock_irq(&chip->mixer_lock);
 
 	change = chip->capture_source[addr][0] != left ||
 		 chip->capture_source[addr][1] != right;
 	chip->capture_source[addr][0] = left;
 	chip->capture_source[addr][1] = right;
 	dev->dmasound.input=addr;
-	spin_unlock_irqrestore(&chip->mixer_lock, flags);
+	spin_unlock_irq(&chip->mixer_lock);
 
 
 	if (change) {
@@ -898,43 +857,44 @@ static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip)
 	return 0;
 }
 
-static int snd_saa7134_free(snd_card_saa7134_t *chip)
+static void snd_saa7134_free(snd_card_t * card)
 {
-	return 0;
-}
+	snd_card_saa7134_t *chip = card->private_data;
+
+	if (chip->dev->dmasound.priv_data == NULL)
+		return;
+
+	if (chip->irq >= 0) {
+		synchronize_irq(chip->irq);
+		free_irq(chip->irq, &chip->dev->dmasound);
+	}
+
+	chip->dev->dmasound.priv_data = NULL;
 
-static int snd_saa7134_dev_free(snd_device_t *device)
-{
-	snd_card_saa7134_t *chip = device->device_data;
-	return snd_saa7134_free(chip);
 }
 
 /*
  * ALSA initialization
  *
- *   Called by saa7134-core, it creates the basic structures and registers
- *  the ALSA devices
+ *   Called by the init routine, once for each saa7134 device present,
+ *  it creates the basic structures and registers the ALSA devices
  *
  */
 
-int alsa_card_saa7134_create (struct saa7134_dev *saadev)
+int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum)
 {
-	static int dev;
 
 	snd_card_t *card;
 	snd_card_saa7134_t *chip;
 	int err;
-	static snd_device_ops_t ops = {
-		.dev_free =     snd_saa7134_dev_free,
-	};
 
 
-	if (dev >= SNDRV_CARDS)
+	if (devnum >= SNDRV_CARDS)
 		return -ENODEV;
-	if (!enable[dev])
+	if (!enable[devnum])
 		return -ENODEV;
 
-	card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+	card = snd_card_new(index[devnum], id[devnum], THIS_MODULE, sizeof(snd_card_saa7134_t));
 
 	if (card == NULL)
 		return -ENOMEM;
@@ -943,34 +903,33 @@ int alsa_card_saa7134_create (struct saa7134_dev *saadev)
 
 	/* Card "creation" */
 
-	chip = kcalloc(1, sizeof(*chip), GFP_KERNEL);
-	if (chip == NULL) {
-		return -ENOMEM;
-	}
+	card->private_free = snd_saa7134_free;
+	chip = (snd_card_saa7134_t *) card->private_data;
 
 	spin_lock_init(&chip->lock);
 	spin_lock_init(&chip->mixer_lock);
 
-	chip->saadev = saadev;
+	chip->dev = dev;
 
 	chip->card = card;
 
-	chip->pci = saadev->pci;
-	chip->irq = saadev->pci->irq;
-	chip->iobase = pci_resource_start(saadev->pci, 0);
+	chip->pci = dev->pci;
+	chip->iobase = pci_resource_start(dev->pci, 0);
 
-	err = request_irq(saadev->pci->irq, saa7134_alsa_irq,
-				SA_SHIRQ | SA_INTERRUPT, saadev->name, saadev);
+
+	err = request_irq(dev->pci->irq, saa7134_alsa_irq,
+				SA_SHIRQ | SA_INTERRUPT, dev->name,
+				(void*) &dev->dmasound);
 
 	if (err < 0) {
 		printk(KERN_ERR "%s: can't get IRQ %d for ALSA\n",
-			saadev->name, saadev->pci->irq);
+			dev->name, dev->pci->irq);
 		goto __nodev;
 	}
 
-	if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
-		goto __nodev;
-	}
+	chip->irq = dev->pci->irq;
+
+	init_MUTEX(&dev->dmasound.lock);
 
 	if ((err = snd_card_saa7134_new_mixer(chip)) < 0)
 		goto __nodev;
@@ -984,16 +943,15 @@ int alsa_card_saa7134_create (struct saa7134_dev *saadev)
 
 	strcpy(card->shortname, "SAA7134");
 	sprintf(card->longname, "%s at 0x%lx irq %d",
-		chip->saadev->name, chip->iobase, chip->irq);
+		chip->dev->name, chip->iobase, chip->irq);
 
 	if ((err = snd_card_register(card)) == 0) {
-		snd_saa7134_cards[dev] = card;
+		snd_saa7134_cards[devnum] = card;
 		return 0;
 	}
 
 __nodev:
 	snd_card_free(card);
-	kfree(chip);
 	return err;
 }
 
@@ -1007,21 +965,29 @@ __nodev:
 
 static int saa7134_alsa_init(void)
 {
-        struct saa7134_dev *saadev = NULL;
-        struct list_head *list;
+	struct saa7134_dev *dev = NULL;
+	struct list_head *list;
 
-	printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n");
+	position = 0;
 
-        list_for_each(list,&saa7134_devlist) {
-                saadev = list_entry(list, struct saa7134_dev, devlist);
-		alsa_card_saa7134_create(saadev);
-        }
+        printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n");
 
-	if (saadev == NULL)
+	list_for_each(list,&saa7134_devlist) {
+		dev = list_entry(list, struct saa7134_dev, devlist);
+		if (dev->dmasound.priv_data == NULL) {
+			dev->dmasound.priv_data = dev;
+			alsa_card_saa7134_create(dev,position);
+			position++;
+		} else {
+			printk(KERN_ERR "saa7134 ALSA: DMA sound is being handled by OSS. ignoring %s\n",dev->name);
+			return -EBUSY;
+		}
+	}
+
+	if (dev == NULL)
 		printk(KERN_INFO "saa7134 ALSA: no saa7134 cards found\n");
 
 	return 0;
-
 }
 
 /*
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 663d03e5bc6..75abc20b0cc 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2529,6 +2529,32 @@ struct saa7134_board saa7134_boards[] = {
 			.amux   = LINE1,
 		}},
 	},
+	[SAA7134_BOARD_MSI_TVATANYWHERE_PLUS] = {
+		.name           = "MSI TV@Anywhere plus",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_TDA8290,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.inputs = {{
+			.name   = name_tv,
+			.vmux   = 1,
+			.amux   = TV,
+			.tv     = 1,
+		},{
+			.name   = name_comp1,
+			.vmux   = 3,
+			.amux   = LINE1,
+		},{
+			.name   = name_svideo,
+			.vmux   = 0,
+			.amux   = LINE1,
+		}},
+		.radio = {
+			.name   = name_radio,
+			.amux   = LINE1,
+		},
+	},
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -2970,6 +2996,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subdevice    = 0x2018,
 		.driver_data  = SAA7134_BOARD_PHILIPS_TIGER,
 	},{
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x1462,
+		.subdevice    = 0x6231,
+		.driver_data  = SAA7134_BOARD_MSI_TVATANYWHERE_PLUS,
+	},{
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 19b88744fb3..4275d2ddb86 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -53,13 +53,13 @@ static unsigned int gpio_tracking = 0;
 module_param(gpio_tracking, int, 0644);
 MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]");
 
-static unsigned int oss = 0;
-module_param(oss, int, 0444);
-MODULE_PARM_DESC(oss,"register oss devices (default: no)");
-
 static unsigned int alsa = 0;
-module_param(alsa, int, 0444);
-MODULE_PARM_DESC(alsa,"register alsa devices (default: no)");
+module_param(alsa, int, 0644);
+MODULE_PARM_DESC(alsa,"enable ALSA DMA sound [dmasound]");
+
+static unsigned int oss = 0;
+module_param(oss, int, 0644);
+MODULE_PARM_DESC(oss,"enable OSS DMA sound [dmasound]");
 
 static unsigned int latency = UNSET;
 module_param(latency, int, 0444);
@@ -68,24 +68,18 @@ MODULE_PARM_DESC(latency,"pci latency timer");
 static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
 static unsigned int vbi_nr[]   = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
 static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
-static unsigned int dsp_nr[]   = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
-static unsigned int mixer_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
 static unsigned int tuner[]    = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
 static unsigned int card[]     = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
 
 module_param_array(video_nr, int, NULL, 0444);
 module_param_array(vbi_nr,   int, NULL, 0444);
 module_param_array(radio_nr, int, NULL, 0444);
-module_param_array(dsp_nr,   int, NULL, 0444);
-module_param_array(mixer_nr, int, NULL, 0444);
 module_param_array(tuner,    int, NULL, 0444);
 module_param_array(card,     int, NULL, 0444);
 
 MODULE_PARM_DESC(video_nr, "video device number");
 MODULE_PARM_DESC(vbi_nr,   "vbi device number");
 MODULE_PARM_DESC(radio_nr, "radio device number");
-MODULE_PARM_DESC(dsp_nr,   "oss dsp device number");
-MODULE_PARM_DESC(mixer_nr, "oss mixer device number");
 MODULE_PARM_DESC(tuner,    "tuner type");
 MODULE_PARM_DESC(card,     "card type");
 
@@ -195,6 +189,7 @@ void saa7134_track_gpio(struct saa7134_dev *dev, char *msg)
 static int need_empress;
 static int need_dvb;
 static int need_alsa;
+static int need_oss;
 
 static int pending_call(struct notifier_block *self, unsigned long state,
 			void *module)
@@ -208,6 +203,8 @@ static int pending_call(struct notifier_block *self, unsigned long state,
 		request_module("saa7134-dvb");
 	if (need_alsa)
 		request_module("saa7134-alsa");
+	if (need_oss)
+		request_module("saa7134-oss");
 	return NOTIFY_DONE;
 }
 
@@ -218,10 +215,11 @@ static struct notifier_block pending_notifier = {
 
 static void request_module_depend(char *name, int *flag)
 {
+	int err;
 	switch (THIS_MODULE->state) {
 	case MODULE_STATE_COMING:
 		if (!pending_registered) {
-			register_module_notifier(&pending_notifier);
+			err = register_module_notifier(&pending_notifier);
 			pending_registered = 1;
 		}
 		*flag = 1;
@@ -578,12 +576,14 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 			goto out;
 		}
 
-		/* If alsa support is active and we get a sound report, exit
-		   and let the saa7134-alsa module deal with it */
+		/* If dmasound support is active and we get a sound report, exit
+		   and let the saa7134-alsa/oss module deal with it */
 
-		if ((report & SAA7134_IRQ_REPORT_DONE_RA3) && alsa)  {
+		if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
+			(dev->dmasound.priv_data != NULL) )
+		{
 			if (irq_debug > 1)
-				printk(KERN_DEBUG "%s/irq: ignoring interrupt for ALSA\n",
+				printk(KERN_DEBUG "%s/irq: ignoring interrupt for DMA sound\n",
 				       dev->name);
 			goto out;
 		}
@@ -609,12 +609,6 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 		    card_has_mpeg(dev))
 			saa7134_irq_ts_done(dev,status);
 
-		if ((report & SAA7134_IRQ_REPORT_DONE_RA3))  {
-			if (oss) {
-				saa7134_irq_oss_done(dev,status);
-			}
-		}
-
 		if ((report & (SAA7134_IRQ_REPORT_GPIO16 |
 			       SAA7134_IRQ_REPORT_GPIO18)) &&
 		    dev->remote)
@@ -689,14 +683,6 @@ static int saa7134_hwinit1(struct saa7134_dev *dev)
 	 * audio will not work.
 	 */
 
-	switch (dev->pci->device) {
-	case PCI_DEVICE_ID_PHILIPS_SAA7134:
-	case PCI_DEVICE_ID_PHILIPS_SAA7133:
-	case PCI_DEVICE_ID_PHILIPS_SAA7135:
-		saa7134_oss_init1(dev);
-		break;
-	}
-
 	/* enable peripheral devices */
 	saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
 
@@ -728,8 +714,6 @@ static int saa7134_hwinit2(struct saa7134_dev *dev)
 		irq2_mask |= (SAA7134_IRQ2_INTE_GPIO18  |
 			      SAA7134_IRQ2_INTE_GPIO18A |
 			      SAA7134_IRQ2_INTE_GPIO16  );
-	else if (dev->has_remote == SAA7134_REMOTE_I2C)
-		request_module("ir-kbd-i2c");
 
 	saa_writel(SAA7134_IRQ1, 0);
 	saa_writel(SAA7134_IRQ2, irq2_mask);
@@ -742,13 +726,6 @@ static int saa7134_hwfini(struct saa7134_dev *dev)
 {
 	dprintk("hwfini\n");
 
-	switch (dev->pci->device) {
-	case PCI_DEVICE_ID_PHILIPS_SAA7134:
-	case PCI_DEVICE_ID_PHILIPS_SAA7133:
-	case PCI_DEVICE_ID_PHILIPS_SAA7135:
-		saa7134_oss_fini(dev);
-		break;
-	}
 	if (card_has_mpeg(dev))
 		saa7134_ts_fini(dev);
 	saa7134_input_fini(dev);
@@ -986,11 +963,12 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (card_is_dvb(dev))
 		request_module_depend("saa7134-dvb",&need_dvb);
 
-	if (!oss && alsa) {
-		dprintk("Requesting ALSA module\n");
+
+	if (alsa)
 		request_module_depend("saa7134-alsa",&need_alsa);
-	}
 
+	if (oss)
+		request_module_depend("saa7134-oss",&need_oss);
 
 	v4l2_prio_init(&dev->prio);
 
@@ -1024,32 +1002,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		       dev->name,dev->radio_dev->minor & 0x1f);
 	}
 
-	/* register oss devices */
-	switch (dev->pci->device) {
-	case PCI_DEVICE_ID_PHILIPS_SAA7134:
-	case PCI_DEVICE_ID_PHILIPS_SAA7133:
-	case PCI_DEVICE_ID_PHILIPS_SAA7135:
-		if (oss) {
-			err = dev->dmasound.minor_dsp =
-				register_sound_dsp(&saa7134_dsp_fops,
-						   dsp_nr[dev->nr]);
-			if (err < 0) {
-				goto fail4;
-			}
-			printk(KERN_INFO "%s: registered device dsp%d\n",
-			       dev->name,dev->dmasound.minor_dsp >> 4);
-
-			err = dev->dmasound.minor_mixer =
-				register_sound_mixer(&saa7134_mixer_fops,
-						     mixer_nr[dev->nr]);
-			if (err < 0)
-				goto fail5;
-			printk(KERN_INFO "%s: registered device mixer%d\n",
-			       dev->name,dev->dmasound.minor_mixer >> 4);
-		}
-		break;
-	}
-
 	/* everything worked */
 	pci_set_drvdata(pci_dev,dev);
 	saa7134_devcount++;
@@ -1064,17 +1016,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 
 	/* check for signal */
 	saa7134_irq_video_intl(dev);
+
 	return 0;
 
- fail5:
-	switch (dev->pci->device) {
-	case PCI_DEVICE_ID_PHILIPS_SAA7134:
-	case PCI_DEVICE_ID_PHILIPS_SAA7133:
-	case PCI_DEVICE_ID_PHILIPS_SAA7135:
-		if (oss)
-			unregister_sound_dsp(dev->dmasound.minor_dsp);
-		break;
-	}
  fail4:
 	saa7134_unregister_video(dev);
 	saa7134_i2c_unregister(dev);
@@ -1125,19 +1069,16 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
 	saa7134_devcount--;
 
 	saa7134_i2c_unregister(dev);
-	switch (dev->pci->device) {
-	case PCI_DEVICE_ID_PHILIPS_SAA7134:
-	case PCI_DEVICE_ID_PHILIPS_SAA7133:
-	case PCI_DEVICE_ID_PHILIPS_SAA7135:
-		if (oss) {
-			unregister_sound_mixer(dev->dmasound.minor_mixer);
-			unregister_sound_dsp(dev->dmasound.minor_dsp);
-		}
-		break;
-	}
 	saa7134_unregister_video(dev);
 
-	/* release ressources */
+	/* the DMA sound modules should be unloaded before reaching
+	   this, but just in case they are still present... */
+	if (dev->dmasound.priv_data != NULL) {
+		free_irq(pci_dev->irq, &dev->dmasound);
+		dev->dmasound.priv_data = NULL;
+	}
+
+	/* release resources */
 	free_irq(pci_dev->irq, dev);
 	iounmap(dev->lmmio);
 	release_mem_region(pci_resource_start(pci_dev,0),
@@ -1225,7 +1166,7 @@ EXPORT_SYMBOL(saa7134_i2c_call_clients);
 EXPORT_SYMBOL(saa7134_devlist);
 EXPORT_SYMBOL(saa7134_boards);
 
-/* ----------------- For ALSA -------------------------------- */
+/* ----------------- for the DMA sound modules --------------- */
 
 EXPORT_SYMBOL(saa7134_pgtable_free);
 EXPORT_SYMBOL(saa7134_pgtable_build);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 329accda6d4..e648cc3bc96 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -485,64 +485,6 @@ static IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = {
 
 };
 
-static IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE] = {
-	[ 0x59 ] = KEY_MUTE,
-	[ 0x4a ] = KEY_POWER,
-
-	[ 0x18 ] = KEY_TEXT,
-	[ 0x26 ] = KEY_TV,
-	[ 0x3d ] = KEY_PRINT,
-
-	[ 0x48 ] = KEY_RED,
-	[ 0x04 ] = KEY_GREEN,
-	[ 0x11 ] = KEY_YELLOW,
-	[ 0x00 ] = KEY_BLUE,
-
-	[ 0x2d ] = KEY_VOLUMEUP,
-	[ 0x1e ] = KEY_VOLUMEDOWN,
-
-	[ 0x49 ] = KEY_MENU,
-
-	[ 0x16 ] = KEY_CHANNELUP,
-	[ 0x17 ] = KEY_CHANNELDOWN,
-
-	[ 0x20 ] = KEY_UP,
-	[ 0x21 ] = KEY_DOWN,
-	[ 0x22 ] = KEY_LEFT,
-	[ 0x23 ] = KEY_RIGHT,
-	[ 0x0d ] = KEY_SELECT,
-
-
-
-	[ 0x08 ] = KEY_BACK,
-	[ 0x07 ] = KEY_REFRESH,
-
-	[ 0x2f ] = KEY_ZOOM,
-	[ 0x29 ] = KEY_RECORD,
-
-	[ 0x4b ] = KEY_PAUSE,
-	[ 0x4d ] = KEY_REWIND,
-	[ 0x2e ] = KEY_PLAY,
-	[ 0x4e ] = KEY_FORWARD,
-	[ 0x53 ] = KEY_PREVIOUS,
-	[ 0x4c ] = KEY_STOP,
-	[ 0x54 ] = KEY_NEXT,
-
-	[ 0x69 ] = KEY_KP0,
-	[ 0x6a ] = KEY_KP1,
-	[ 0x6b ] = KEY_KP2,
-	[ 0x6c ] = KEY_KP3,
-	[ 0x6d ] = KEY_KP4,
-	[ 0x6e ] = KEY_KP5,
-	[ 0x6f ] = KEY_KP6,
-	[ 0x70 ] = KEY_KP7,
-	[ 0x71 ] = KEY_KP8,
-	[ 0x72 ] = KEY_KP9,
-
-	[ 0x74 ] = KEY_CHANNEL,
-	[ 0x0a ] = KEY_BACKSPACE,
-};
-
 /* Mapping for the 28 key remote control as seen at
    http://www.sednacomputer.com/photo/cardbus-tv.jpg
    Pavel Mihaylov <bin@bash.info> */
@@ -635,57 +577,6 @@ static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	return 1;
 }
 
-/* The new pinnacle PCTV remote (with the colored buttons)
- *
- * Ricardo Cerqueira <v4l@cerqueira.org>
- */
-
-static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-	unsigned char b[4];
-	unsigned int start = 0,parity = 0,code = 0;
-
-	/* poll IR chip */
-	if (4 != i2c_master_recv(&ir->c,b,4)) {
-		i2cdprintk("read error\n");
-		return -EIO;
-	}
-
-	for (start = 0; start<4; start++) {
-		if (b[start] == 0x80) {
-			code=b[(start+3)%4];
-			parity=b[(start+2)%4];
-		}
-	}
-
-	/* Empty Request */
-	if (parity==0)
-		return 0;
-
-	/* Repeating... */
-	if (ir->old == parity)
-		return 0;
-
-
-	ir->old = parity;
-
-	/* Reduce code value to fit inside IR_KEYTAB_SIZE
-	 *
-	 * this is the only value that results in 42 unique
-	 * codes < 128
-	 */
-
-	code %= 0x88;
-
-	*ir_raw = code;
-	*ir_key = code;
-
-	i2cdprintk("Pinnacle PCTV key %02x\n", code);
-
-	return 1;
-}
-
-
 void saa7134_input_irq(struct saa7134_dev *dev)
 {
 	struct saa7134_ir *ir = dev->remote;
diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c
index fd53dfcc164..fd9ed11ab1e 100644
--- a/drivers/media/video/saa7134/saa7134-oss.c
+++ b/drivers/media/video/saa7134/saa7134-oss.c
@@ -4,6 +4,8 @@
  * oss dsp interface
  *
  * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *     2005 conversion to standalone module:
+ *         Ricardo Cerqueira <v4l@cerqueira.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -25,7 +27,9 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/sound.h>
 #include <linux/soundcard.h>
 
 #include "saa7134-reg.h"
@@ -33,15 +37,23 @@
 
 /* ------------------------------------------------------------------ */
 
-static unsigned int oss_debug  = 0;
-module_param(oss_debug, int, 0644);
-MODULE_PARM_DESC(oss_debug,"enable debug messages [oss]");
+static unsigned int debug  = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug,"enable debug messages [oss]");
 
-static unsigned int oss_rate  = 0;
-module_param(oss_rate, int, 0444);
-MODULE_PARM_DESC(oss_rate,"sample rate (valid are: 32000,48000)");
+static unsigned int rate  = 0;
+module_param(rate, int, 0444);
+MODULE_PARM_DESC(rate,"sample rate (valid are: 32000,48000)");
 
-#define dprintk(fmt, arg...)	if (oss_debug) \
+static unsigned int dsp_nr[]   = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
+MODULE_PARM_DESC(dsp_nr, "device numbers for SAA7134 capture interface(s).");
+module_param_array(dsp_nr,   int, NULL, 0444);
+
+static unsigned int mixer_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
+MODULE_PARM_DESC(mixer_nr, "mixer numbers for SAA7134 capture interface(s).");
+module_param_array(mixer_nr, int, NULL, 0444);
+
+#define dprintk(fmt, arg...)	if (debug) \
 	printk(KERN_DEBUG "%s/oss: " fmt, dev->name , ## arg)
 
 
@@ -369,7 +381,7 @@ static int dsp_ioctl(struct inode *inode, struct file *file,
 	int __user *p = argp;
 	int val = 0;
 
-	if (oss_debug > 1)
+	if (debug > 1)
 		saa7134_print_ioctl(dev->name,cmd);
 	switch (cmd) {
 	case OSS_GETVERSION:
@@ -665,7 +677,7 @@ static int mixer_ioctl(struct inode *inode, struct file *file,
 	void __user *argp = (void __user *) arg;
 	int __user *p = argp;
 
-	if (oss_debug > 1)
+	if (debug > 1)
 		saa7134_print_ioctl(dev->name,cmd);
 	switch (cmd) {
 	case OSS_GETVERSION:
@@ -768,8 +780,41 @@ struct file_operations saa7134_mixer_fops = {
 
 /* ------------------------------------------------------------------ */
 
+static irqreturn_t saa7134_oss_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+        struct saa7134_dmasound *dmasound = dev_id;
+        struct saa7134_dev *dev = dmasound->priv_data;
+        unsigned long report, status;
+        int loop, handled = 0;
+
+        for (loop = 0; loop < 10; loop++) {
+                report = saa_readl(SAA7134_IRQ_REPORT);
+                status = saa_readl(SAA7134_IRQ_STATUS);
+
+                if (report & SAA7134_IRQ_REPORT_DONE_RA3) {
+                        handled = 1;
+                        saa_writel(SAA7134_IRQ_REPORT,report);
+                        saa7134_irq_oss_done(dev, status);
+                } else {
+                        goto out;
+                }
+        }
+
+        if (loop == 10) {
+                dprintk("error! looping IRQ!");
+        }
+out:
+        return IRQ_RETVAL(handled);
+}
+
 int saa7134_oss_init1(struct saa7134_dev *dev)
 {
+
+        if ((request_irq(dev->pci->irq, saa7134_oss_irq,
+                         SA_SHIRQ | SA_INTERRUPT, dev->name,
+			(void*) &dev->dmasound)) < 0)
+		return -1;
+
 	/* general */
 	init_MUTEX(&dev->dmasound.lock);
 	init_waitqueue_head(&dev->dmasound.wq);
@@ -785,8 +830,8 @@ int saa7134_oss_init1(struct saa7134_dev *dev)
 
 	/* dsp */
 	dev->dmasound.rate = 32000;
-	if (oss_rate)
-		dev->dmasound.rate = oss_rate;
+	if (rate)
+		dev->dmasound.rate = rate;
 	dev->dmasound.rate = (dev->dmasound.rate > 40000) ? 48000 : 32000;
 
 	/* mixer */
@@ -840,7 +885,7 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status)
 	/* next block addr */
 	next_blk = (dev->dmasound.dma_blk + 2) % dev->dmasound.blocks;
 	saa_writel(reg,next_blk * dev->dmasound.blksize);
-	if (oss_debug > 2)
+	if (debug > 2)
 		dprintk("irq: ok, %s, next_blk=%d, addr=%x\n",
 			(status & 0x10000000) ? "even" : "odd ", next_blk,
 			next_blk * dev->dmasound.blksize);
@@ -854,6 +899,98 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status)
 	spin_unlock(&dev->slock);
 }
 
+int saa7134_dsp_create(struct saa7134_dev *dev)
+{
+	int err;
+
+                        err = dev->dmasound.minor_dsp =
+                                register_sound_dsp(&saa7134_dsp_fops,
+                                                   dsp_nr[dev->nr]);
+                        if (err < 0) {
+                                goto fail;
+                        }
+                        printk(KERN_INFO "%s: registered device dsp%d\n",
+                               dev->name,dev->dmasound.minor_dsp >> 4);
+
+                        err = dev->dmasound.minor_mixer =
+                                register_sound_mixer(&saa7134_mixer_fops,
+                                                     mixer_nr[dev->nr]);
+                        if (err < 0)
+                                goto fail;
+                        printk(KERN_INFO "%s: registered device mixer%d\n",
+                               dev->name,dev->dmasound.minor_mixer >> 4);
+
+	return 0;
+
+fail:
+        unregister_sound_dsp(dev->dmasound.minor_dsp);
+	return 0;
+
+
+}
+
+static int saa7134_oss_init(void)
+{
+        struct saa7134_dev *dev = NULL;
+        struct list_head *list;
+
+        printk(KERN_INFO "saa7134 OSS driver for DMA sound loaded\n");
+
+        list_for_each(list,&saa7134_devlist) {
+                dev = list_entry(list, struct saa7134_dev, devlist);
+		if (dev->dmasound.priv_data == NULL) {
+			dev->dmasound.priv_data = dev;
+			saa7134_oss_init1(dev);
+			saa7134_dsp_create(dev);
+		} else {
+                	printk(KERN_ERR "saa7134 OSS: DMA sound is being handled by ALSA, ignoring %s\n",dev->name);
+			return -EBUSY;
+		}
+        }
+
+        if (dev == NULL)
+                printk(KERN_INFO "saa7134 OSS: no saa7134 cards found\n");
+
+        return 0;
+
+}
+
+void saa7134_oss_exit(void)
+{
+        struct saa7134_dev *dev = NULL;
+        struct list_head *list;
+
+        list_for_each(list,&saa7134_devlist) {
+                dev = list_entry(list, struct saa7134_dev, devlist);
+
+		/* Device isn't registered by OSS, probably ALSA's */
+		if (!dev->dmasound.minor_dsp)
+			continue;
+
+                unregister_sound_mixer(dev->dmasound.minor_mixer);
+                unregister_sound_dsp(dev->dmasound.minor_dsp);
+
+		saa7134_oss_fini(dev);
+
+		if (dev->pci->irq > 0) {
+			synchronize_irq(dev->pci->irq);
+			free_irq(dev->pci->irq,&dev->dmasound);
+		}
+
+        	dev->dmasound.priv_data = NULL;
+
+        }
+
+        printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n");
+
+        return;
+}
+
+module_init(saa7134_oss_init);
+module_exit(saa7134_oss_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+
 /* ----------------------------------------------------------- */
 /*
  * Local variables:
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index fb972747166..244e1973081 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -208,6 +208,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_SEDNA_PC_TV_CARDBUS     79
 #define SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV 80
 #define SAA7134_BOARD_PHILIPS_TIGER  81
+#define SAA7134_BOARD_MSI_TVATANYWHERE_PLUS  82
 
 #define SAA7134_MAXBOARDS 8
 #define SAA7134_INPUT_MAX 8
@@ -383,6 +384,7 @@ struct saa7134_dmasound {
 	unsigned int               dma_blk;
 	unsigned int               read_offset;
 	unsigned int               read_count;
+	void *			   priv_data;
 	snd_pcm_substream_t 	   *substream;
 };
 
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index b2dfe07e9f9..61d94ddaff4 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -437,6 +437,10 @@ static void set_audio(struct tuner *t)
 		t->sgIF = 124;
 		t->tda8290_easy_mode = 0x20;
 		mode = "L";
+	} else if (t->std & V4L2_STD_SECAM_LC) {
+		t->sgIF = 20;
+		t->tda8290_easy_mode = 0x40;
+		mode = "LC";
 	}
     tuner_dbg("setting tda8290 to system %s\n", mode);
 }
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 73c4041c35d..e58abdfcaab 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -251,7 +251,7 @@ static inline int check_mode(struct tuner *t, char *cmd)
 
 static char pal[] = "-";
 module_param_string(pal, pal, sizeof(pal), 0644);
-static char secam[] = "-";
+static char secam[] = "--";
 module_param_string(secam, secam, sizeof(secam), 0644);
 
 /* get more precise norm info from insmod option */
@@ -307,8 +307,13 @@ static int tuner_fixup_std(struct tuner *t)
 			break;
 		case 'l':
 		case 'L':
-			tuner_dbg ("insmod fixup: SECAM => SECAM-L\n");
-			t->std = V4L2_STD_SECAM_L;
+			if ((secam[1]=='C')||(secam[1]=='c')) {
+				tuner_dbg ("insmod fixup: SECAM => SECAM-L'\n");
+				t->std = V4L2_STD_SECAM_LC;
+			} else {
+				tuner_dbg ("insmod fixup: SECAM => SECAM-L\n");
+				t->std = V4L2_STD_SECAM_L;
+			}
 			break;
 		case '-':
 			/* default parameter, do nothing */
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index d832205818f..e0c9fdb9914 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -233,7 +233,7 @@ static struct tunertype tuners[] = {
 	{ "Ymec TVision TVF-5533MF", Philips, NTSC,
 	  16*160.00,16*454.00,0x01,0x02,0x04,0x8e,732},
 
-	/* 60-68 */
+	/* 60-69 */
 	{ "Thomson DDT 7611 (ATSC/NTSC)", THOMSON, ATSC,
 	  16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732},
 	{ "Tena TNF9533-D/IF/TNF9533-B/DF", Philips, PAL,
@@ -252,6 +252,8 @@ static struct tunertype tuners[] = {
 	  16*160.00,16*442.00,0xa1,0xa2,0xa4,0xc8,623 },
 	{ "Philips TUV1236D ATSC/NTSC dual in", Philips, ATSC,
 	  16*157.25,16*454.00,0x01,0x02,0x04,0xce,732 },
+	{ "Tena TNF 5335 MF", Philips, NTSC,
+	  16*157.25,16*454.00,0x01,0x02,0x04,0x8e,732 },
 };
 
 unsigned const int tuner_count = ARRAY_SIZE(tuners);
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index 22f28622200..a6936ad74fc 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -5,6 +5,11 @@
  *
  * Based on saa7115 driver
  *
+ * Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl>
+ * - Cleanup
+ * - V4L2 API update
+ * - sound fixes
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -31,7 +36,7 @@
 #include <media/audiochip.h>
 
 MODULE_DESCRIPTION("wm8775 driver");
-MODULE_AUTHOR("Ulf Eklund");
+MODULE_AUTHOR("Ulf Eklund, Hans Verkuil");
 MODULE_LICENSE("GPL");
 
 #define wm8775_err(fmt, arg...) do { \
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 1e6bdba2675..166c9b0ad04 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -22,7 +22,6 @@
 
 #include <asm/div64.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/scatterlist.h>
 #include <asm/sizes.h>
 #include <asm/hardware/amba.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 48638c8097a..846a533323a 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -94,7 +94,7 @@ config MTD_NETSC520
 
 config MTD_TS5500
 	tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
-	depends on ELAN
+	depends on X86
 	select MTD_PARTITIONS
 	select MTD_JEDECPROBE
 	select MTD_CFI_AMDSTD
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 977935a3d89..824e430486c 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -84,6 +84,7 @@ static int max_interrupt_work = 10;
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>	/* for udelay() */
 #include <linux/spinlock.h>
@@ -173,7 +174,7 @@ struct el3_private {
 	/* skb send-queue */
 	int head, size;
 	struct sk_buff *queue[SKB_QUEUE_SIZE];
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 	struct pm_dev *pmdev;
 #endif
 	enum {
@@ -200,7 +201,7 @@ static void el3_tx_timeout (struct net_device *dev);
 static void el3_down(struct net_device *dev);
 static void el3_up(struct net_device *dev);
 static struct ethtool_ops ethtool_ops;
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 static int el3_suspend(struct pm_dev *pdev);
 static int el3_resume(struct pm_dev *pdev);
 static int el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data);
@@ -361,7 +362,7 @@ static void el3_common_remove (struct net_device *dev)
 	struct el3_private *lp = netdev_priv(dev);
 
 	(void) lp;				/* Keep gcc quiet... */
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 	if (lp->pmdev)
 		pm_unregister(lp->pmdev);
 #endif
@@ -571,7 +572,7 @@ no_pnp:
 	if (err)
 		goto out1;
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 	/* register power management */
 	lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback);
 	if (lp->pmdev) {
@@ -1479,7 +1480,7 @@ el3_up(struct net_device *dev)
 }
 
 /* Power Management support functions */
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 
 static int
 el3_suspend(struct pm_dev *pdev)
@@ -1548,7 +1549,7 @@ el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
 	return 0;
 }
 
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_LEGACY */
 
 /* Parameters that may be passed into the module. */
 static int debug = -1;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index e3a329539f1..0f030b73cbb 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -6,7 +6,7 @@
  * Based on 8260_io/fcc_enet.c
  *
  * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ * Maintainer: Kumar Gala
  *
  * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
  *
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 220084e5334..5065ba82cb7 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -6,7 +6,7 @@
  * Based on 8260_io/fcc_enet.c
  *
  * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ * Maintainer: Kumar Gala
  *
  * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
  *
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 5a2d810ce57..cfa3cd7c91a 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -6,7 +6,7 @@
  *  Based on e1000 ethtool support
  *
  *  Author: Andy Fleming
- *  Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *  Maintainer: Kumar Gala
  *
  *  Copyright (c) 2003,2004 Freescale Semiconductor, Inc.
  *
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 9544279e8bc..04a462c2a5b 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -5,7 +5,7 @@
  * Provides Bus interface for MIIM regs
  *
  * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ * Maintainer: Kumar Gala
  *
  * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
  *
diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h
index 56e5665d5c9..e85eb216fb5 100644
--- a/drivers/net/gianfar_mii.h
+++ b/drivers/net/gianfar_mii.h
@@ -5,7 +5,7 @@
  * Driver for the MDIO bus controller in the Gianfar register space
  *
  * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ * Maintainer: Kumar Gala
  *
  * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
  *
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 9bf34681d3d..2e7882eb7d6 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -40,6 +40,7 @@
 #include <asm/byteorder.h>
 
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 
 #include <net/irda/wrapper.h>
 #include <net/irda/irda.h>
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 805714ec9a8..ee717d0e939 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -59,6 +59,7 @@
 #include <asm/byteorder.h>
 
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 
 #include <net/irda/wrapper.h>
 #include <net/irda/irda.h>
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index a10cd184d59..5c2824be4ee 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -100,14 +100,14 @@
 #define SMC_IO_SHIFT		0
 #define SMC_NOWAIT		1
 
-#define SMC_inb(a, r)		inb((a) + (r))
-#define SMC_insb(a, r, p, l)	insb((a) + (r), p, (l))
-#define SMC_inw(a, r)		inw((a) + (r))
-#define SMC_insw(a, r, p, l)	insw((a) + (r), p, l)
-#define SMC_outb(v, a, r)	outb(v, (a) + (r))
-#define SMC_outsb(a, r, p, l)	outsb((a) + (r), p, (l))
-#define SMC_outw(v, a, r)	outw(v, (a) + (r))
-#define SMC_outsw(a, r, p, l)	outsw((a) + (r), p, l)
+#define SMC_inb(a, r)		readb((a) + (r))
+#define SMC_insb(a, r, p, l)	readsb((a) + (r), p, (l))
+#define SMC_inw(a, r)		readw((a) + (r))
+#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
+#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
+#define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
+#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
 
 #define set_irq_type(irq, type) do {} while (0)
 
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index de399563a9d..081717d0137 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -128,6 +128,8 @@ static struct pci_device_id gem_pci_tbl[] = {
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_SUNGEM,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_GMAC,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{0, }
 };
 
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 4a3cecca012..2387e75da0f 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -31,6 +31,8 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/interrupt.h>
+
 #include "../pci.h"
 #include "pciehp.h"
 
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index a7859a84d1a..4b35097b3d9 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -253,7 +253,7 @@ rpaphp_pci_config_slot(struct pci_bus *bus)
 	if (!dn || !dn->child)
 		return NULL;
 
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR) {
+	if (_machine == PLATFORM_PSERIES_LPAR) {
 		of_scan_bus(dn, bus);
 		if (list_empty(&bus->devices)) {
 			err("%s: No new device found\n", __FUNCTION__);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 40905a6c809..9987a6fd65b 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -31,6 +31,8 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/interrupt.h>
+
 #include "shpchp.h"
 
 #ifdef DEBUG
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 234cdca6fe1..a30aa74304a 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -513,6 +513,11 @@ static int socket_insert(struct pcmcia_socket *skt)
 	ret = socket_setup(skt, setup_delay);
 	if (ret == CS_SUCCESS) {
 		skt->state |= SOCKET_PRESENT;
+
+		printk(KERN_NOTICE "pccard: %s card inserted into slot %d\n",
+		       (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
+		       skt->sock);
+
 #ifdef CONFIG_CARDBUS
 		if (skt->state & SOCKET_CARDBUS) {
 			cb_alloc(skt);
@@ -598,6 +603,7 @@ static int socket_resume(struct pcmcia_socket *skt)
 
 static void socket_remove(struct pcmcia_socket *skt)
 {
+	printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock);
 	socket_shutdown(skt);
 	cs_socket_put(skt);
 }
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 39d096b5292..7f8219f3fd9 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -544,6 +544,9 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f
 	list_add_tail(&p_dev->socket_device_list, &s->devices_list);
 	spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
 
+	printk(KERN_NOTICE "pcmcia: registering new device %s\n",
+	       p_dev->devname);
+
 	pcmcia_device_query(p_dev);
 
 	if (device_register(&p_dev->dev)) {
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 4ddd76239b3..4d56bc9926d 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1339,10 +1339,7 @@ static struct device_driver i82365_driver = {
 	.resume = pcmcia_socket_dev_resume,
 };
 
-static struct platform_device i82365_device = {
-	.name = "i82365",
-	.id = 0,
-};
+static struct platform_device *i82365_device;
 
 static int __init init_i82365(void)
 {
@@ -1352,7 +1349,14 @@ static int __init init_i82365(void)
     if (ret)
 	return ret;
 
-    ret = platform_device_register(&i82365_device);
+    i82365_device = platform_device_alloc("i82365", 0);
+    if (i82365_device) {
+	    ret = platform_device_add(i82365_device);
+	    if (ret)
+		    platform_device_put(i82365_device);
+    } else
+	    ret = -ENOMEM;
+
     if (ret) {
 	driver_unregister(&i82365_driver);
 	return ret;
@@ -1365,7 +1369,7 @@ static int __init init_i82365(void)
 
     if (sockets == 0) {
 	printk("not found.\n");
-	platform_device_unregister(&i82365_device);
+	platform_device_unregister(i82365_device);
 	release_region(i365_base, 2);
 	driver_unregister(&i82365_driver);
 	return -ENODEV;
@@ -1377,7 +1381,7 @@ static int __init init_i82365(void)
     
     /* register sockets with the pcmcia core */
     for (i = 0; i < sockets; i++) {
-	    socket[i].socket.dev.dev = &i82365_device.dev;
+	    socket[i].socket.dev.dev = &i82365_device->dev;
 	    socket[i].socket.ops = &pcic_operations;
 	    socket[i].socket.resource_ops = &pccard_nonstatic_ops;
 	    socket[i].socket.owner = THIS_MODULE;
@@ -1415,7 +1419,7 @@ static void __exit exit_i82365(void)
 	    if (socket[i].flags & IS_REGISTERED)
 		    pcmcia_unregister_socket(&socket[i].socket);
     }
-    platform_device_unregister(&i82365_device);
+    platform_device_unregister(i82365_device);
     if (poll_interval != 0)
 	del_timer_sync(&poll_timer);
     if (grab_irq != 0)
diff --git a/drivers/sbus/char/rtc.c b/drivers/sbus/char/rtc.c
index 5774bdd0e26..9b988baf0b5 100644
--- a/drivers/sbus/char/rtc.c
+++ b/drivers/sbus/char/rtc.c
@@ -210,27 +210,6 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	}
 }
 
-static long rtc_compat_ioctl(struct file *file, unsigned int cmd,
-	unsigned long arg)
-{
-	int rval = -ENOIOCTLCMD;
-
-	switch (cmd) {
-	/*
-	 * These two are specific to this driver, the generic rtc ioctls
-	 * are hanlded elsewhere.
-	 */
-	case RTCGET:
-	case RTCSET:
-		lock_kernel();
-		rval = rtc_ioctl(file->f_dentry->d_inode, file, cmd, arg);
-		unlock_kernel();
-		break;
-	}
-
-	return rval;
-}
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
 	int ret;
@@ -258,7 +237,6 @@ static struct file_operations rtc_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
 	.ioctl =	rtc_ioctl,
-	.compat_ioctl =	rtc_compat_ioctl,
 	.open =		rtc_open,
 	.release =	rtc_release,
 };
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 57ef7ae387d..4e96ec5f2ff 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -134,6 +134,7 @@ enum {
 				  PORT_IRQ_D2H_REG_FIS,
 
 	/* PORT_CMD bits */
+	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
 	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
 	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
 	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
@@ -441,7 +442,7 @@ static void ahci_phy_reset(struct ata_port *ap)
 	void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
 	struct ata_taskfile tf;
 	struct ata_device *dev = &ap->device[0];
-	u32 tmp;
+	u32 new_tmp, tmp;
 
 	__sata_phy_reset(ap);
 
@@ -455,8 +456,21 @@ static void ahci_phy_reset(struct ata_port *ap)
 	tf.nsect	= (tmp)		& 0xff;
 
 	dev->class = ata_dev_classify(&tf);
-	if (!ata_dev_present(dev))
+	if (!ata_dev_present(dev)) {
 		ata_port_disable(ap);
+		return;
+	}
+
+	/* Make sure port's ATAPI bit is set appropriately */
+	new_tmp = tmp = readl(port_mmio + PORT_CMD);
+	if (dev->class == ATA_DEV_ATAPI)
+		new_tmp |= PORT_CMD_ATAPI;
+	else
+		new_tmp &= ~PORT_CMD_ATAPI;
+	if (new_tmp != tmp) {
+		writel(new_tmp, port_mmio + PORT_CMD);
+		readl(port_mmio + PORT_CMD); /* flush */
+	}
 }
 
 static u8 ahci_check_status(struct ata_port *ap)
@@ -474,11 +488,12 @@ static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	ata_tf_from_fis(d2h_fis, tf);
 }
 
-static void ahci_fill_sg(struct ata_queued_cmd *qc)
+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc)
 {
 	struct ahci_port_priv *pp = qc->ap->private_data;
 	struct scatterlist *sg;
 	struct ahci_sg *ahci_sg;
+	unsigned int n_sg = 0;
 
 	VPRINTK("ENTER\n");
 
@@ -493,8 +508,12 @@ static void ahci_fill_sg(struct ata_queued_cmd *qc)
 		ahci_sg->addr = cpu_to_le32(addr & 0xffffffff);
 		ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
 		ahci_sg->flags_size = cpu_to_le32(sg_len - 1);
+
 		ahci_sg++;
+		n_sg++;
 	}
+
+	return n_sg;
 }
 
 static void ahci_qc_prep(struct ata_queued_cmd *qc)
@@ -503,13 +522,14 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc)
 	struct ahci_port_priv *pp = ap->private_data;
 	u32 opts;
 	const u32 cmd_fis_len = 5; /* five dwords */
+	unsigned int n_elem;
 
 	/*
 	 * Fill in command slot information (currently only one slot,
 	 * slot 0, is currently since we don't do queueing)
 	 */
 
-	opts = (qc->n_elem << 16) | cmd_fis_len;
+	opts = cmd_fis_len;
 	if (qc->tf.flags & ATA_TFLAG_WRITE)
 		opts |= AHCI_CMD_WRITE;
 	if (is_atapi_taskfile(&qc->tf))
@@ -533,7 +553,9 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc)
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
 		return;
 
-	ahci_fill_sg(qc);
+	n_elem = ahci_fill_sg(qc);
+
+	pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16);
 }
 
 static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index e51d9a8a279..d81db3a3d4b 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -532,8 +532,7 @@ void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
  *	@fis: Buffer from which data will be input
  *	@tf: Taskfile to output
  *
- *	Converts a standard ATA taskfile to a Serial ATA
- *	FIS structure (Register - Host to Device).
+ *	Converts a serial ATA FIS structure to a standard ATA taskfile.
  *
  *	LOCKING:
  *	Inherited from caller.
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 261be24e1df..0df4b682965 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2276,6 +2276,12 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
 		tf->device = scsicmd[8];
 		tf->command = scsicmd[9];
 	}
+	/*
+	 * If slave is possible, enforce correct master/slave bit
+	*/
+	if (qc->ap->flags & ATA_FLAG_SLAVE_POSS)
+		tf->device = qc->dev->devno ?
+			tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
 
 	/*
 	 * Filter SET_FEATURES - XFER MODE command -- otherwise,
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index b2f6324a2eb..4a6d3067d23 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -268,7 +268,7 @@ static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 	writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
 }
 
-static void qs_fill_sg(struct ata_queued_cmd *qc)
+static unsigned int qs_fill_sg(struct ata_queued_cmd *qc)
 {
 	struct scatterlist *sg;
 	struct ata_port *ap = qc->ap;
@@ -296,6 +296,8 @@ static void qs_fill_sg(struct ata_queued_cmd *qc)
 					(unsigned long long)addr, len);
 		nelem++;
 	}
+
+	return nelem;
 }
 
 static void qs_qc_prep(struct ata_queued_cmd *qc)
@@ -304,6 +306,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc)
 	u8 dflags = QS_DF_PORD, *buf = pp->pkt;
 	u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD;
 	u64 addr;
+	unsigned int nelem;
 
 	VPRINTK("ENTER\n");
 
@@ -313,7 +316,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc)
 		return;
 	}
 
-	qs_fill_sg(qc);
+	nelem = qs_fill_sg(qc);
 
 	if ((qc->tf.flags & ATA_TFLAG_WRITE))
 		hflags |= QS_HF_DIRO;
@@ -324,7 +327,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc)
 	buf[ 0] = QS_HCB_HDR;
 	buf[ 1] = hflags;
 	*(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE);
-	*(__le32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem);
+	*(__le32 *)(&buf[ 8]) = cpu_to_le32(nelem);
 	addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES;
 	*(__le64 *)(&buf[16]) = cpu_to_le64(addr);
 
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index d3198d9a72c..55e744d6db8 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -687,6 +687,7 @@ static void sil24_port_stop(struct ata_port *ap)
 	struct sil24_port_priv *pp = ap->private_data;
 
 	sil24_cblk_free(pp, dev);
+	ata_pad_free(ap, dev);
 	kfree(pp);
 }
 
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 2efb317153c..67e9afa000c 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -34,6 +34,7 @@
 #include <linux/keyboard.h>
 #include <linux/init.h>
 #include <linux/pm.h>
+#include <linux/pm_legacy.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 
@@ -1343,7 +1344,7 @@ static void show_serial_version(void)
 	printk("MC68328 serial driver version 1.00\n");
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 /* Serial Power management
  *  The console (currently fixed at line 0) is a special case for power
  *  management because the kernel is so chatty. The console will be 
@@ -1393,7 +1394,7 @@ void startup_console(void)
 	struct m68k_serial *info = &m68k_soft[0];
 	startup(info);
 }
-#endif
+#endif /* CONFIG_PM_LEGACY */
 
 
 static struct tty_operations rs_ops = {
@@ -1486,7 +1487,7 @@ rs68328_init(void)
 			    IRQ_FLG_STD,
 			    "M68328_UART", NULL))
                 panic("Unable to attach 68328 serial interrupt\n");
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_LEGACY
 	    serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback);
 	    if (serial_pm[i])
 		    serial_pm[i]->data = info;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 3742753241e..e08510d09ff 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -999,7 +999,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	serial_outp(up, UART_MCR, save_mcr);
 	serial8250_clear_fifos(up);
 	(void)serial_in(up, UART_RX);
-	serial_outp(up, UART_IER, 0);
+	if (up->capabilities & UART_CAP_UUE)
+		serial_outp(up, UART_IER, UART_IER_UUE);
+	else
+		serial_outp(up, UART_IER, 0);
 
  out:	
 	spin_unlock_irqrestore(&up->port.lock, flags);
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 5d8660a42b7..b79ed0665d5 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -323,6 +323,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"USR9180",		0	},
 	/* U.S. Robotics 56K Voice INT PnP*/
 	{	"USR9190",		0	},
+	/* HP Compaq Tablet PC tc1100 Wacom tablet */
+	{	"WACF005",		0	},
 	/* Rockwell's (PORALiNK) 33600 INT PNP */
 	{	"WCI0003",		0	},
 	/* Unkown PnP modems */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 25825f2aba2..987d22b53c2 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -7,7 +7,7 @@
  *  Based on ppc8xx.c by Thomas Gleixner
  *  Based on drivers/serial/amba.c by Russell King
  *
- *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 4b0786e7eb7..d789ee55cbb 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -3,7 +3,7 @@
  *
  *  Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
  *
- *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 15ad58d9488..fd9e53ed3fe 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -3,7 +3,7 @@
  *
  *  Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
  *
- *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
  * 
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index e63b9dffc8d..4d8516d1bb7 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -1,9 +1,9 @@
 /*
- * dz.c: Serial port driver for DECStations equiped 
+ * dz.c: Serial port driver for DECStations equiped
  *       with the DZ chipset.
  *
- * Copyright (C) 1998 Olivier A. D. Lebaillif 
- *             
+ * Copyright (C) 1998 Olivier A. D. Lebaillif
+ *
  * Email: olivier.lebaillif@ifrsys.com
  *
  * [31-AUG-98] triemer
@@ -11,14 +11,14 @@
  * removed base_addr code - moving address assignment to setup.c
  * Changed name of dz_init to rs_init to be consistent with tc code
  * [13-NOV-98] triemer fixed code to receive characters
- *    after patches by harald to irq code.  
+ *    after patches by harald to irq code.
  * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
  *            field from "current" - somewhere between 2.1.121 and 2.1.131
  Qua Jun 27 15:02:26 BRT 2001
  * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
- *  
- * Parts (C) 1999 David Airlie, airlied@linux.ie 
- * [07-SEP-99] Bugfixes 
+ *
+ * Parts (C) 1999 David Airlie, airlied@linux.ie
+ * [07-SEP-99] Bugfixes
  *
  * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk>
  * Converted to new serial core
@@ -64,7 +64,7 @@ static struct dz_port dz_ports[DZ_NB_PORT];
 
 #ifdef DEBUG_DZ
 /*
- * debugging code to send out chars via prom 
+ * debugging code to send out chars via prom
  */
 static void debug_console(const char *s, int count)
 {
@@ -82,7 +82,7 @@ static void debug_console(const char *s, int count)
  * ------------------------------------------------------------
  * dz_in () and dz_out ()
  *
- * These routines are used to access the registers of the DZ 
+ * These routines are used to access the registers of the DZ
  * chip, hiding relocation differences between implementation.
  * ------------------------------------------------------------
  */
@@ -106,8 +106,8 @@ static inline void dz_out(struct dz_port *dport, unsigned offset,
  * ------------------------------------------------------------
  * rs_stop () and rs_start ()
  *
- * These routines are called before setting or resetting 
- * tty->stopped. They enable or disable transmitter interrupts, 
+ * These routines are called before setting or resetting
+ * tty->stopped. They enable or disable transmitter interrupts,
  * as necessary.
  * ------------------------------------------------------------
  */
@@ -156,17 +156,17 @@ static void dz_enable_ms(struct uart_port *port)
 
 /*
  * ------------------------------------------------------------
- * Here starts the interrupt handling routines.  All of the 
- * following subroutines are declared as inline and are folded 
- * into dz_interrupt.  They were separated out for readability's 
- * sake. 
+ * Here starts the interrupt handling routines.  All of the
+ * following subroutines are declared as inline and are folded
+ * into dz_interrupt.  They were separated out for readability's
+ * sake.
  *
  * Note: rs_interrupt() is a "fast" interrupt, which means that it
  * runs with interrupts turned off.  People who may want to modify
  * rs_interrupt() should try to keep the interrupt handler as fast as
  * possible.  After you are done making modifications, it is not a bad
  * idea to do:
- * 
+ *
  *	make drivers/serial/dz.s
  *
  * and look at the resulting assemble code in dz.s.
@@ -403,7 +403,7 @@ static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl)
  * startup ()
  *
  * various initialization tasks
- * ------------------------------------------------------------------- 
+ * -------------------------------------------------------------------
  */
 static int dz_startup(struct uart_port *uport)
 {
@@ -430,13 +430,13 @@ static int dz_startup(struct uart_port *uport)
 	return 0;
 }
 
-/* 
+/*
  * -------------------------------------------------------------------
  * shutdown ()
  *
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
- * ------------------------------------------------------------------- 
+ * -------------------------------------------------------------------
  */
 static void dz_shutdown(struct uart_port *uport)
 {
@@ -451,7 +451,7 @@ static void dz_shutdown(struct uart_port *uport)
  *          release the bus after transmitting. This must be done when
  *          the transmit shift register is empty, not be done when the
  *          transmit holding register is empty.  This functionality
- *          allows an RS485 driver to be written in user space. 
+ *          allows an RS485 driver to be written in user space.
  */
 static unsigned int dz_tx_empty(struct uart_port *uport)
 {
@@ -645,9 +645,9 @@ static void __init dz_init_ports(void)
 
 	if (mips_machtype == MACH_DS23100 ||
 	    mips_machtype == MACH_DS5100)
-		base = (unsigned long) KN01_DZ11_BASE;
+		base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_DZ11);
 	else
-		base = (unsigned long) KN02_DZ11_BASE;
+		base = CKSEG1ADDR(KN02_SLOT_BASE + KN02_DZ11);
 
 	for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
 		spin_lock_init(&dport->port.lock);
@@ -695,13 +695,13 @@ static void dz_console_put_char(struct dz_port *dport, unsigned char ch)
 
 	spin_unlock_irqrestore(&dport->port.lock, flags);
 }
-/* 
+/*
  * -------------------------------------------------------------------
  * dz_console_print ()
  *
  * dz_console_print is registered for printk.
  * The console must be locked when we get here.
- * ------------------------------------------------------------------- 
+ * -------------------------------------------------------------------
  */
 static void dz_console_print(struct console *cons,
 			     const char *str,
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 5d3cb848644..b8727d9bf69 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -725,7 +725,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
 	int i, idx, ret;
 
 	/* Check validity & presence */
-	idx = pdev->id;
+	idx = dev->id;
 	if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
 		return -EINVAL;
 
@@ -748,7 +748,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
 	port->ops	= &mpc52xx_uart_ops;
 
 	/* Search for IRQ and mapbase */
-	for (i=0 ; i<pdev->num_resources ; i++, res++) {
+	for (i=0 ; i<dev->num_resources ; i++, res++) {
 		if (res->flags & IORESOURCE_MEM)
 			port->mapbase = res->start;
 		else if (res->flags & IORESOURCE_IRQ)
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index fd9deee20e0..0e3daf6d7b5 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -156,7 +156,7 @@ static void sa1100_stop_tx(struct uart_port *port)
 }
 
 /*
- * interrupts may not be disabled on entry
+ * port locked and interrupts disabled
  */
 static void sa1100_start_tx(struct uart_port *port)
 {
@@ -164,11 +164,9 @@ static void sa1100_start_tx(struct uart_port *port)
 	unsigned long flags;
 	u32 utcr3;
 
-	spin_lock_irqsave(&sport->port.lock, flags);
 	utcr3 = UART_GET_UTCR3(sport);
 	sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS);
 	UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 /*
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 427a2385807..2331296e1e1 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -209,33 +209,45 @@ static void uart_shutdown(struct uart_state *state)
 	struct uart_info *info = state->info;
 	struct uart_port *port = state->port;
 
-	if (!(info->flags & UIF_INITIALIZED))
-		return;
-
 	/*
-	 * Turn off DTR and RTS early.
+	 * Set the TTY IO error marker
 	 */
-	if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
-		uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
 
-	/*
-	 * clear delta_msr_wait queue to avoid mem leaks: we may free
-	 * the irq here so the queue might never be woken up.  Note
-	 * that we won't end up waiting on delta_msr_wait again since
-	 * any outstanding file descriptors should be pointing at
-	 * hung_up_tty_fops now.
-	 */
-	wake_up_interruptible(&info->delta_msr_wait);
+	if (info->flags & UIF_INITIALIZED) {
+		info->flags &= ~UIF_INITIALIZED;
 
-	/*
-	 * Free the IRQ and disable the port.
-	 */
-	port->ops->shutdown(port);
+		/*
+		 * Turn off DTR and RTS early.
+		 */
+		if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+
+		/*
+		 * clear delta_msr_wait queue to avoid mem leaks: we may free
+		 * the irq here so the queue might never be woken up.  Note
+		 * that we won't end up waiting on delta_msr_wait again since
+		 * any outstanding file descriptors should be pointing at
+		 * hung_up_tty_fops now.
+		 */
+		wake_up_interruptible(&info->delta_msr_wait);
+
+		/*
+		 * Free the IRQ and disable the port.
+		 */
+		port->ops->shutdown(port);
+
+		/*
+		 * Ensure that the IRQ handler isn't running on another CPU.
+		 */
+		synchronize_irq(port->irq);
+	}
 
 	/*
-	 * Ensure that the IRQ handler isn't running on another CPU.
+	 * kill off our tasklet
 	 */
-	synchronize_irq(port->irq);
+	tasklet_kill(&info->tlet);
 
 	/*
 	 * Free the transmit buffer page.
@@ -244,15 +256,6 @@ static void uart_shutdown(struct uart_state *state)
 		free_page((unsigned long)info->xmit.buf);
 		info->xmit.buf = NULL;
 	}
-
-	/*
-	 * kill off our tasklet
-	 */
-	tasklet_kill(&info->tlet);
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
-
-	info->flags &= ~UIF_INITIALIZED;
 }
 
 /**
@@ -1928,14 +1931,25 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 
 	if (state->info && state->info->flags & UIF_INITIALIZED) {
 		struct uart_ops *ops = port->ops;
+		int ret;
 
 		ops->set_mctrl(port, 0);
-		ops->startup(port);
-		uart_change_speed(state, NULL);
-		spin_lock_irq(&port->lock);
-		ops->set_mctrl(port, port->mctrl);
-		ops->start_tx(port);
-		spin_unlock_irq(&port->lock);
+		ret = ops->startup(port);
+		if (ret == 0) {
+			uart_change_speed(state, NULL);
+			spin_lock_irq(&port->lock);
+			ops->set_mctrl(port, port->mctrl);
+			ops->start_tx(port);
+			spin_unlock_irq(&port->lock);
+		} else {
+			/*
+			 * Failed to resume - maybe hardware went away?
+			 * Clear the "initialized" flag so we won't try
+			 * to call the low level drivers shutdown method.
+			 */
+			state->info->flags &= ~UIF_INITIALIZED;
+			uart_shutdown(state);
+		}
 	}
 
 	up(&state->sem);
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index f53bf3ba127..d3728f60961 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -51,6 +51,9 @@ static struct fb_ops bw2_ops = {
 	.fb_imageblit		= cfb_imageblit,
 	.fb_mmap		= bw2_mmap,
 	.fb_ioctl		= bw2_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 /* OBio addresses for the bwtwo registers */
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index 030d4b13b1c..1bed50f2a27 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -49,6 +49,9 @@ static struct fb_ops cg14_ops = {
 	.fb_imageblit		= cfb_imageblit,
 	.fb_mmap		= cg14_mmap,
 	.fb_ioctl		= cg14_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 #define CG14_MCR_INTENABLE_SHIFT	7
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index b94eee8c42d..a1354e7e051 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -50,6 +50,9 @@ static struct fb_ops cg3_ops = {
 	.fb_imageblit		= cfb_imageblit,
 	.fb_mmap		= cg3_mmap,
 	.fb_ioctl		= cg3_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index 414c4409e92..9debe642fd2 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -54,6 +54,9 @@ static struct fb_ops cg6_ops = {
 	.fb_sync		= cg6_sync,
 	.fb_mmap		= cg6_mmap,
 	.fb_ioctl		= cg6_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 /* Offset of interesting structures in the OBIO space */
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 94c5f1392cc..5f74df99340 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -215,12 +215,5 @@ config FONT_10x18
 	  big letters. It fits between the sun 12x22 and the normal 8x16 font.
 	  If other fonts are too big or too small for you, say Y, otherwise say N.
 
-config FONT_RL
-	bool "console Roman Large 8x16 font" if FONTS
-	depends on FRAMEBUFFER_CONSOLE
-	help
-	  This is the visually-appealing "RL" console font that is
-	  included with the kbd package.
-
 endmenu
 
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index fed600c9ca5..9b26dda18a3 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -15,7 +15,6 @@ font-objs-$(CONFIG_FONT_10x18)     += font_10x18.o
 font-objs-$(CONFIG_FONT_PEARL_8x8) += font_pearl_8x8.o
 font-objs-$(CONFIG_FONT_ACORN_8x8) += font_acorn_8x8.o
 font-objs-$(CONFIG_FONT_MINI_4x6)  += font_mini_4x6.o
-font-objs-$(CONFIG_FONT_RL)  += font_rl.o
 
 font-objs += $(font-objs-y)
 
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index e7802ffe549..bcea87c3cc0 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -106,8 +106,7 @@ enum {
 	FBCON_LOGO_DONTSHOW	= -3	/* do not show the logo */
 };
 
-struct display fb_display[MAX_NR_CONSOLES];
-EXPORT_SYMBOL(fb_display);
+static struct display fb_display[MAX_NR_CONSOLES];
 
 static signed char con2fb_map[MAX_NR_CONSOLES];
 static signed char con2fb_map_boot[MAX_NR_CONSOLES];
@@ -653,13 +652,12 @@ static void set_blitting_type(struct vc_data *vc, struct fb_info *info,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 
+	ops->p = (p) ? p : &fb_display[vc->vc_num];
+
 	if ((info->flags & FBINFO_MISC_TILEBLITTING))
 		fbcon_set_tileops(vc, info, p, ops);
 	else {
-		struct display *disp;
-
-		disp = (p) ? p : &fb_display[vc->vc_num];
-		fbcon_set_rotation(info, disp);
+		fbcon_set_rotation(info, ops->p);
 		fbcon_set_bitops(ops);
 	}
 }
@@ -668,11 +666,10 @@ static void set_blitting_type(struct vc_data *vc, struct fb_info *info,
 			      struct display *p)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	struct display *disp;
 
 	info->flags &= ~FBINFO_MISC_TILEBLITTING;
-	disp = (p) ? p : &fb_display[vc->vc_num];
-	fbcon_set_rotation(info, disp);
+	ops->p = (p) ? p : &fb_display[vc->vc_num];
+	fbcon_set_rotation(info, ops->p);
 	fbcon_set_bitops(ops);
 }
 #endif /* CONFIG_MISC_TILEBLITTING */
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index accfd7bd8e9..6892e7ff34d 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -52,8 +52,6 @@ struct display {
     struct fb_videomode *mode;
 };
 
-extern struct display fb_display[];
-
 struct fbcon_ops {
 	void (*bmove)(struct vc_data *vc, struct fb_info *info, int sy,
 		      int sx, int dy, int dx, int height, int width);
@@ -73,6 +71,7 @@ struct fbcon_ops {
 	struct fb_var_screeninfo var;  /* copy of the current fb_var_screeninfo */
 	struct timer_list cursor_timer; /* Cursor timer */
 	struct fb_cursor cursor_state;
+	struct display *p;
         int    currcon;	                /* Current VC. */
 	int    cursor_flash;
 	int    cursor_reset;
diff --git a/drivers/video/console/fbcon_ccw.c b/drivers/video/console/fbcon_ccw.c
index 680aabab73c..3afd1eeb1ad 100644
--- a/drivers/video/console/fbcon_ccw.c
+++ b/drivers/video/console/fbcon_ccw.c
@@ -63,9 +63,9 @@ static inline void ccw_update_attr(u8 *dst, u8 *src, int attribute,
 static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int dy, int dx, int height, int width)
 {
-	struct display *p = &fb_display[vc->vc_num];
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 
 	area.sx = sy * vc->vc_font.height;
 	area.sy = vyres - ((sx + width) * vc->vc_font.width);
@@ -80,10 +80,10 @@ static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 static void ccw_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int height, int width)
 {
-	struct display *p = &fb_display[vc->vc_num];
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc);
 	region.dx = sy * vc->vc_font.height;
@@ -131,7 +131,6 @@ static void ccw_putcs(struct vc_data *vc, struct fb_info *info,
 		      int fg, int bg)
 {
 	struct fb_image image;
-	struct display *p = &fb_display[vc->vc_num];
 	struct fbcon_ops *ops = info->fbcon_par;
 	u32 width = (vc->vc_font.height + 7)/8;
 	u32 cellsize = width * vc->vc_font.width;
@@ -141,7 +140,7 @@ static void ccw_putcs(struct vc_data *vc, struct fb_info *info,
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -397,9 +396,8 @@ static void ccw_cursor(struct vc_data *vc, struct fb_info *info,
 int ccw_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	struct display *p = &fb_display[ops->currcon];
 	u32 yoffset;
-	u32 vyres = GETVYRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 	int err;
 
 	yoffset = (vyres - info->var.yres) - ops->var.xoffset;
diff --git a/drivers/video/console/fbcon_cw.c b/drivers/video/console/fbcon_cw.c
index 6c6f3b6dd17..6d92b845620 100644
--- a/drivers/video/console/fbcon_cw.c
+++ b/drivers/video/console/fbcon_cw.c
@@ -49,9 +49,9 @@ static inline void cw_update_attr(u8 *dst, u8 *src, int attribute,
 static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int dy, int dx, int height, int width)
 {
-	struct display *p = &fb_display[vc->vc_num];
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	area.sx = vxres - ((sy + height) * vc->vc_font.height);
 	area.sy = sx * vc->vc_font.width;
@@ -66,10 +66,10 @@ static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 static void cw_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int height, int width)
 {
-	struct display *p = &fb_display[vc->vc_num];
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc);
 	region.dx = vxres - ((sy + height) * vc->vc_font.height);
@@ -117,7 +117,6 @@ static void cw_putcs(struct vc_data *vc, struct fb_info *info,
 		      int fg, int bg)
 {
 	struct fb_image image;
-	struct display *p = &fb_display[vc->vc_num];
 	struct fbcon_ops *ops = info->fbcon_par;
 	u32 width = (vc->vc_font.height + 7)/8;
 	u32 cellsize = width * vc->vc_font.width;
@@ -127,7 +126,7 @@ static void cw_putcs(struct vc_data *vc, struct fb_info *info,
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -381,8 +380,7 @@ static void cw_cursor(struct vc_data *vc, struct fb_info *info,
 int cw_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	struct display *p = &fb_display[ops->currcon];
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 	u32 xoffset;
 	int err;
 
diff --git a/drivers/video/console/fbcon_ud.c b/drivers/video/console/fbcon_ud.c
index 2e1d9d4249c..c4d7c89212b 100644
--- a/drivers/video/console/fbcon_ud.c
+++ b/drivers/video/console/fbcon_ud.c
@@ -48,10 +48,10 @@ static inline void ud_update_attr(u8 *dst, u8 *src, int attribute,
 static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int dy, int dx, int height, int width)
 {
-	struct display *p = &fb_display[vc->vc_num];
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(p->scrollmode, info);
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	area.sy = vyres - ((sy + height) * vc->vc_font.height);
 	area.sx = vxres - ((sx + width) * vc->vc_font.width);
@@ -66,11 +66,11 @@ static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 static void ud_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int height, int width)
 {
-	struct display *p = &fb_display[vc->vc_num];
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(p->scrollmode, info);
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc);
 	region.dy = vyres - ((sy + height) * vc->vc_font.height);
@@ -153,7 +153,6 @@ static void ud_putcs(struct vc_data *vc, struct fb_info *info,
 		      int fg, int bg)
 {
 	struct fb_image image;
-	struct display *p = &fb_display[vc->vc_num];
 	struct fbcon_ops *ops = info->fbcon_par;
 	u32 width = (vc->vc_font.width + 7)/8;
 	u32 cellsize = width * vc->vc_font.height;
@@ -163,8 +162,8 @@ static void ud_putcs(struct vc_data *vc, struct fb_info *info,
 	u32 mod = vc->vc_font.width % 8, cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(p->scrollmode, info);
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -421,10 +420,9 @@ static void ud_cursor(struct vc_data *vc, struct fb_info *info,
 int ud_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	struct display *p = &fb_display[ops->currcon];
 	u32 xoffset, yoffset;
-	u32 vyres = GETVYRES(p->scrollmode, info);
-	u32 vxres = GETVXRES(p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 	int err;
 
 	xoffset = (vxres - info->var.xres) - ops->var.xoffset;
diff --git a/drivers/video/console/font_rl.c b/drivers/video/console/font_rl.c
deleted file mode 100644
index dfecc27d8de..00000000000
--- a/drivers/video/console/font_rl.c
+++ /dev/null
@@ -1,4374 +0,0 @@
-
-/* This font is simply the "rl.fnt" console font from the kbd utility.
- * Converted by Zack T Smith, fbui@comcast.net.
- * The original binary file is covered under the GNU Public License.
- */
-
-#include <linux/font.h>
-
-#define FONTDATAMAX 4096
-
-static unsigned char patterns[4096] = {
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x3c,
-0x42,
-0x81,
-0xe7,
-0xa5,
-0x99,
-0x81,
-0x81,
-0x99,
-0x42,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x3c,
-0x7e,
-0xff,
-0x99,
-0xdb,
-0xe7,
-0xff,
-0xff,
-0xe7,
-0x7e,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x6c,
-0xfe,
-0xfe,
-0xfe,
-0xfe,
-0xfe,
-0x7c,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x7c,
-0xfe,
-0x7c,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x38,
-0x38,
-0x10,
-0xd6,
-0xfe,
-0xd6,
-0x10,
-0x10,
-0x38,
-0x7c,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x10,
-0x38,
-0x7c,
-0xfe,
-0xfe,
-0x54,
-0x10,
-0x10,
-0x38,
-0x7c,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x18,
-0x3c,
-0x3c,
-0x18,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xe7,
-0xc3,
-0xc3,
-0xe7,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x3c,
-0x66,
-0x42,
-0x42,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xc3,
-0x99,
-0xbd,
-0xbd,
-0x99,
-0xc3,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-
-0x00,
-0x00,
-0x0f,
-0x07,
-0x0d,
-0x18,
-0x78,
-0xcc,
-0xcc,
-0xcc,
-0xcc,
-0x78,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x3c,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x18,
-0x7e,
-0x18,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x08,
-0x0c,
-0x0a,
-0x0a,
-0x0a,
-0x08,
-0x08,
-0x08,
-0x38,
-0x78,
-0x30,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x10,
-0x18,
-0x1c,
-0x1e,
-0x1e,
-0x16,
-0x12,
-0x72,
-0xf2,
-0x62,
-0x0e,
-0x1e,
-0x0c,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x10,
-0x92,
-0x54,
-0x38,
-0xfe,
-0x38,
-0x54,
-0x92,
-0x10,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x80,
-0xc0,
-0xe0,
-0xb8,
-0x8e,
-0xb8,
-0xe0,
-0xc0,
-0x80,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x02,
-0x06,
-0x0e,
-0x3a,
-0xe2,
-0x3a,
-0x0e,
-0x06,
-0x02,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x10,
-0x38,
-0x7c,
-0xd6,
-0x10,
-0x10,
-0x10,
-0x10,
-0xd6,
-0x7c,
-0x38,
-0x10,
-0x00,
-0x00,
-
-0x00,
-0x42,
-0xe7,
-0xe7,
-0xe7,
-0xe7,
-0x42,
-0x42,
-0x42,
-0x00,
-0x66,
-0x66,
-0x66,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x7f,
-0xca,
-0xca,
-0xca,
-0xca,
-0x7a,
-0x0a,
-0x0a,
-0x0a,
-0x0a,
-0x0a,
-0x1b,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x1e,
-0x31,
-0x78,
-0xcc,
-0xc6,
-0xc3,
-0x63,
-0x33,
-0x1e,
-0x8c,
-0x78,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xfe,
-0xfe,
-0xfe,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x10,
-0x38,
-0x7c,
-0xd6,
-0x10,
-0x10,
-0x10,
-0x10,
-0xd6,
-0x7c,
-0x38,
-0x10,
-0xfe,
-0x00,
-
-0x00,
-0x00,
-0x10,
-0x38,
-0x7c,
-0xd6,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0x10,
-0xd6,
-0x7c,
-0x38,
-0x10,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x08,
-0x0c,
-0x06,
-0xff,
-0x06,
-0x0c,
-0x08,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x10,
-0x30,
-0x60,
-0xff,
-0x60,
-0x30,
-0x10,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x22,
-0x44,
-0x88,
-0xcc,
-0xee,
-0x44,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x24,
-0x42,
-0xff,
-0x42,
-0x24,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x38,
-0x6c,
-0x6c,
-0xc6,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0xfe,
-0xc6,
-0x6c,
-0x6c,
-0x38,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x18,
-0x3c,
-0x3c,
-0x3c,
-0x3c,
-0x18,
-0x18,
-0x18,
-0x10,
-0x00,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-
-0x22,
-0x77,
-0x33,
-0x11,
-0x22,
-0x44,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x12,
-0x12,
-0x12,
-0x7f,
-0x24,
-0x24,
-0x24,
-0xfe,
-0x48,
-0x48,
-0x48,
-0x00,
-0x00,
-0x00,
-
-0x10,
-0x10,
-0x7c,
-0xd2,
-0xd0,
-0xd0,
-0xd0,
-0x7c,
-0x16,
-0x16,
-0x16,
-0x96,
-0x7c,
-0x10,
-0x10,
-0x00,
-
-0x00,
-0x42,
-0xbe,
-0x44,
-0x0c,
-0x08,
-0x18,
-0x10,
-0x30,
-0x20,
-0x64,
-0x4a,
-0xc4,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x38,
-0x6c,
-0x6c,
-0x6c,
-0x38,
-0x37,
-0x72,
-0xdc,
-0xcc,
-0xcc,
-0xcc,
-0x77,
-0x00,
-0x00,
-0x00,
-
-0x10,
-0x38,
-0x18,
-0x08,
-0x10,
-0x20,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x04,
-0x08,
-0x10,
-0x10,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x10,
-0x10,
-0x08,
-0x04,
-0x00,
-0x00,
-
-0x00,
-0x20,
-0x10,
-0x08,
-0x08,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x08,
-0x08,
-0x10,
-0x20,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x44,
-0x28,
-0x38,
-0xfe,
-0x38,
-0x28,
-0x44,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x18,
-0x18,
-0x7e,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x18,
-0x08,
-0x10,
-0x20,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7e,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x06,
-0x06,
-0x0c,
-0x0c,
-0x18,
-0x18,
-0x30,
-0x30,
-0x60,
-0x60,
-0xc0,
-0xc0,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x3c,
-0x46,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc4,
-0x78,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x08,
-0x18,
-0x78,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x7e,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x7c,
-0x86,
-0x06,
-0x0c,
-0x18,
-0x20,
-0x40,
-0xc1,
-0xfe,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x3c,
-0x46,
-0x04,
-0x08,
-0x1c,
-0x06,
-0x06,
-0x06,
-0x06,
-0x0c,
-0x70,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x04,
-0x08,
-0x10,
-0x2c,
-0x4c,
-0x8c,
-0x8c,
-0xfe,
-0x0c,
-0x0c,
-0x0c,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x02,
-0x3c,
-0x20,
-0x20,
-0x70,
-0x0c,
-0x06,
-0x06,
-0x06,
-0x06,
-0x0c,
-0x70,
-0x00,
-
-0x00,
-0x00,
-0x18,
-0x20,
-0x40,
-0xc0,
-0xdc,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0x44,
-0x38,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x40,
-0x7e,
-0x82,
-0x06,
-0x04,
-0x0c,
-0x18,
-0x18,
-0x30,
-0x30,
-0x30,
-0x30,
-0x00,
-
-0x00,
-0x00,
-0x7c,
-0xc6,
-0xc6,
-0x64,
-0x38,
-0x4c,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0x7c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x38,
-0x44,
-0xc6,
-0xc6,
-0x76,
-0x06,
-0x06,
-0x06,
-0x04,
-0x08,
-0x30,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x18,
-0x08,
-0x10,
-0x20,
-
-0x00,
-0x06,
-0x0c,
-0x18,
-0x30,
-0x60,
-0xa0,
-0xa0,
-0x60,
-0x30,
-0x18,
-0x0c,
-0x06,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7e,
-0x00,
-0x00,
-0x7e,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x60,
-0x30,
-0x18,
-0x0c,
-0x06,
-0x05,
-0x05,
-0x06,
-0x0c,
-0x18,
-0x30,
-0x60,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x7c,
-0x86,
-0xc6,
-0x06,
-0x04,
-0x08,
-0x10,
-0x10,
-0x18,
-0x00,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x3c,
-0x46,
-0xc6,
-0xce,
-0xd6,
-0xd6,
-0xd6,
-0xdc,
-0xc0,
-0xc4,
-0x78,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x2c,
-0x2c,
-0x2c,
-0x7e,
-0x46,
-0x46,
-0x46,
-0xef,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xfc,
-0x66,
-0x66,
-0x66,
-0x66,
-0x7c,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xfc,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3a,
-0x66,
-0xc2,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xfc,
-0x66,
-0x63,
-0x63,
-0x63,
-0x63,
-0x63,
-0x63,
-0x63,
-0x63,
-0x66,
-0xfc,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xff,
-0x61,
-0x60,
-0x60,
-0x64,
-0x7c,
-0x64,
-0x60,
-0x60,
-0x60,
-0x61,
-0xfe,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xff,
-0x61,
-0x61,
-0x60,
-0x64,
-0x7c,
-0x64,
-0x60,
-0x60,
-0x60,
-0x60,
-0xf0,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3a,
-0x66,
-0xc2,
-0xc0,
-0xc0,
-0xc0,
-0xcf,
-0xc6,
-0xc6,
-0xc6,
-0x66,
-0x38,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xf7,
-0x62,
-0x62,
-0x62,
-0x62,
-0x7e,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0xf7,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3c,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x1e,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x08,
-0xf0,
-
-0x00,
-0xf7,
-0x64,
-0x6c,
-0x68,
-0x68,
-0x78,
-0x6c,
-0x6c,
-0x6c,
-0x66,
-0x66,
-0xf7,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xf8,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x61,
-0xfe,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xc3,
-0x66,
-0x76,
-0x7e,
-0x56,
-0x56,
-0x46,
-0x46,
-0x46,
-0x46,
-0x46,
-0xef,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xe7,
-0x62,
-0x62,
-0x72,
-0x52,
-0x5a,
-0x4a,
-0x4e,
-0x46,
-0x46,
-0x42,
-0xe2,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3c,
-0x66,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xfc,
-0x66,
-0x66,
-0x66,
-0x66,
-0x6c,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0xf0,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3c,
-0x66,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0x66,
-0x3c,
-0x10,
-0x39,
-0x0e,
-
-0x00,
-0xfc,
-0x66,
-0x66,
-0x66,
-0x66,
-0x7c,
-0x6c,
-0x66,
-0x66,
-0x66,
-0x66,
-0xf3,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x7a,
-0xc6,
-0xc2,
-0xc0,
-0x70,
-0x3c,
-0x0e,
-0x06,
-0x06,
-0x86,
-0xc6,
-0xbc,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xff,
-0x99,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xf7,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xf7,
-0x62,
-0x62,
-0x62,
-0x76,
-0x34,
-0x34,
-0x34,
-0x3c,
-0x18,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xf7,
-0x62,
-0x62,
-0x62,
-0x62,
-0x6a,
-0x6a,
-0x6a,
-0x6a,
-0x7e,
-0x7e,
-0x34,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xf7,
-0x62,
-0x62,
-0x34,
-0x34,
-0x18,
-0x18,
-0x2c,
-0x2c,
-0x46,
-0x46,
-0xef,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xf7,
-0x62,
-0x62,
-0x62,
-0x34,
-0x34,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x7f,
-0x46,
-0x86,
-0x0c,
-0x0c,
-0x18,
-0x18,
-0x30,
-0x30,
-0x61,
-0x62,
-0xfe,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3c,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xc0,
-0xc0,
-0x60,
-0x60,
-0x30,
-0x30,
-0x18,
-0x18,
-0x0c,
-0x0c,
-0x06,
-0x06,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x10,
-0x38,
-0x4c,
-0x86,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-
-0x00,
-0x18,
-0x20,
-0x30,
-0x38,
-0x10,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x78,
-0x8c,
-0x0c,
-0x3c,
-0xcc,
-0xcc,
-0xcd,
-0x76,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x20,
-0xe0,
-0x60,
-0x60,
-0x6c,
-0x76,
-0x66,
-0x66,
-0x66,
-0x66,
-0x76,
-0x6c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x3c,
-0x66,
-0x60,
-0x60,
-0x60,
-0x60,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x04,
-0x1c,
-0x0c,
-0x0c,
-0x6c,
-0xdc,
-0xcc,
-0xcc,
-0xcc,
-0xcc,
-0xdc,
-0x66,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x3c,
-0x66,
-0x7e,
-0x60,
-0x60,
-0x60,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x1e,
-0x31,
-0x33,
-0x30,
-0x30,
-0x78,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x78,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7b,
-0xce,
-0xcc,
-0xcc,
-0xcc,
-0x78,
-0x60,
-0x7c,
-0x86,
-0xc6,
-0x7c,
-
-0x00,
-0x20,
-0xe0,
-0x60,
-0x60,
-0x6c,
-0x76,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xf7,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x10,
-0x38,
-0x10,
-0x00,
-0x18,
-0x38,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x08,
-0x1c,
-0x08,
-0x00,
-0x0c,
-0x1c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x0c,
-0x6c,
-0x4c,
-0x38,
-0x00,
-
-0x00,
-0x20,
-0xe0,
-0x60,
-0x60,
-0x67,
-0x66,
-0x6c,
-0x78,
-0x6c,
-0x6c,
-0x66,
-0xe7,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x08,
-0x38,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x6a,
-0xfe,
-0x6a,
-0x6a,
-0x6a,
-0x62,
-0x62,
-0xf7,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x5c,
-0xf6,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xf7,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x3c,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x5c,
-0xe6,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x7c,
-0x60,
-0x60,
-0xf0,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x76,
-0xcc,
-0xcc,
-0xcc,
-0xcc,
-0xcc,
-0xcc,
-0x7c,
-0x0c,
-0x0c,
-0x1e,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x5e,
-0xf6,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0xf0,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7a,
-0xc6,
-0x72,
-0x1c,
-0x06,
-0x86,
-0xc6,
-0xbc,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x10,
-0x30,
-0x7c,
-0x30,
-0x30,
-0x30,
-0x30,
-0x30,
-0x34,
-0x18,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xee,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x67,
-0x3a,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xf7,
-0x62,
-0x76,
-0x34,
-0x34,
-0x3c,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xf7,
-0x62,
-0x6a,
-0x6a,
-0x6a,
-0x6a,
-0x7e,
-0x24,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xf7,
-0x62,
-0x34,
-0x18,
-0x2c,
-0x46,
-0x46,
-0xef,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xf7,
-0x62,
-0x62,
-0x34,
-0x34,
-0x18,
-0x18,
-0x18,
-0x10,
-0xb0,
-0xe0,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xfe,
-0x8c,
-0x18,
-0x30,
-0x30,
-0x60,
-0xc2,
-0xfe,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x0e,
-0x18,
-0x10,
-0x10,
-0x08,
-0x70,
-0x70,
-0x08,
-0x10,
-0x10,
-0x18,
-0x0e,
-0x00,
-0x00,
-0x00,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x00,
-0x00,
-
-0x00,
-0x70,
-0x18,
-0x08,
-0x08,
-0x10,
-0x0e,
-0x0e,
-0x10,
-0x08,
-0x08,
-0x18,
-0x70,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x76,
-0xdc,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x10,
-0x38,
-0x6c,
-0xc6,
-0xc6,
-0xc6,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x3a,
-0x66,
-0xc2,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0x62,
-0x3c,
-0x18,
-0x0c,
-0x24,
-0x18,
-
-0x00,
-0x00,
-0x66,
-0x00,
-0x00,
-0xee,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3b,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x0c,
-0x18,
-0x20,
-0x00,
-0x3c,
-0x66,
-0x7e,
-0x60,
-0x60,
-0x60,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x30,
-0x58,
-0x8c,
-0x00,
-0x78,
-0x8c,
-0x0c,
-0x3c,
-0xcc,
-0xcc,
-0xcd,
-0x76,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x66,
-0x00,
-0x00,
-0x78,
-0x8c,
-0x0c,
-0x3c,
-0xcc,
-0xcc,
-0xcd,
-0x76,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x30,
-0x18,
-0x04,
-0x00,
-0x78,
-0x8c,
-0x0c,
-0x3c,
-0xcc,
-0xcc,
-0xcd,
-0x76,
-0x00,
-0x00,
-0x00,
-
-0x38,
-0x44,
-0x44,
-0x38,
-0x00,
-0x78,
-0x8c,
-0x0c,
-0x3c,
-0xcc,
-0xcc,
-0xcd,
-0x76,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x3c,
-0x66,
-0x60,
-0x60,
-0x60,
-0x60,
-0x62,
-0x3c,
-0x08,
-0x24,
-0x18,
-
-0x00,
-0x18,
-0x2c,
-0x46,
-0x00,
-0x3c,
-0x66,
-0x7e,
-0x60,
-0x60,
-0x60,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x66,
-0x00,
-0x00,
-0x3c,
-0x66,
-0x7e,
-0x60,
-0x60,
-0x60,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x30,
-0x18,
-0x04,
-0x00,
-0x3c,
-0x66,
-0x7e,
-0x60,
-0x60,
-0x60,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x66,
-0x00,
-0x00,
-0x38,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x18,
-0x2c,
-0x46,
-0x00,
-0x38,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x60,
-0x30,
-0x08,
-0x00,
-0x38,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x66,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x2c,
-0x2c,
-0x2c,
-0x7e,
-0x46,
-0x46,
-0x46,
-0xef,
-0x00,
-0x00,
-0x00,
-
-0x18,
-0x24,
-0x18,
-0x18,
-0x3c,
-0x2c,
-0x2c,
-0x2c,
-0x7e,
-0x46,
-0x46,
-0x46,
-0xef,
-0x00,
-0x00,
-0x00,
-
-0x0c,
-0x18,
-0xff,
-0x61,
-0x60,
-0x60,
-0x64,
-0x7c,
-0x64,
-0x60,
-0x60,
-0x61,
-0xfe,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x76,
-0x9b,
-0x1b,
-0x3f,
-0xd8,
-0xd8,
-0xd9,
-0x6e,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x1f,
-0x1d,
-0x1d,
-0x3c,
-0x2c,
-0x2e,
-0x2c,
-0x7c,
-0x4c,
-0x4c,
-0x4d,
-0xef,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x18,
-0x2c,
-0x46,
-0x00,
-0x3c,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x66,
-0x00,
-0x00,
-0x3c,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x30,
-0x18,
-0x04,
-0x00,
-0x3c,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x18,
-0x2c,
-0x46,
-0x00,
-0xee,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x67,
-0x3a,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x30,
-0x18,
-0x04,
-0x00,
-0xee,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x67,
-0x3a,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x66,
-0x00,
-0x00,
-0xf7,
-0x62,
-0x62,
-0x34,
-0x34,
-0x18,
-0x18,
-0x18,
-0x10,
-0xb0,
-0xe0,
-
-0x66,
-0x00,
-0x3c,
-0x66,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x66,
-0x00,
-0xf7,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x62,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x10,
-0x10,
-0x10,
-0x7c,
-0xc6,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0xc2,
-0x7c,
-0x10,
-0x10,
-0x00,
-
-0x00,
-0x38,
-0x64,
-0x6c,
-0x60,
-0x60,
-0xf0,
-0x60,
-0x60,
-0x60,
-0x60,
-0x66,
-0xfc,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x81,
-0xc3,
-0x66,
-0x3c,
-0x18,
-0xff,
-0x18,
-0x18,
-0xff,
-0x18,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xfe,
-0x63,
-0x63,
-0x63,
-0x63,
-0x6e,
-0x60,
-0x64,
-0x6e,
-0x64,
-0x64,
-0xf5,
-0x06,
-0x00,
-0x00,
-
-0x00,
-0x0e,
-0x19,
-0x1b,
-0x18,
-0x18,
-0x3c,
-0x18,
-0x18,
-0x18,
-0x18,
-0xd8,
-0x98,
-0x70,
-0x00,
-0x00,
-
-0x00,
-0x0c,
-0x18,
-0x20,
-0x00,
-0x78,
-0x8c,
-0x0c,
-0x3c,
-0xcc,
-0xcc,
-0xcd,
-0x76,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x06,
-0x0c,
-0x10,
-0x00,
-0x38,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x0c,
-0x18,
-0x20,
-0x00,
-0x3c,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x0c,
-0x18,
-0x20,
-0x00,
-0xee,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x67,
-0x3a,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x32,
-0x4c,
-0x00,
-0x5c,
-0xf6,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xf7,
-0x00,
-0x00,
-0x00,
-
-0x32,
-0x4c,
-0x00,
-0xe7,
-0x72,
-0x52,
-0x5a,
-0x4a,
-0x4e,
-0x46,
-0x46,
-0x42,
-0xe2,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x78,
-0x8c,
-0x0c,
-0x3c,
-0xcc,
-0xcc,
-0xcd,
-0x76,
-0x00,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3c,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x00,
-0x7e,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x30,
-0x30,
-0x00,
-0x30,
-0x10,
-0x10,
-0x20,
-0x40,
-0xc0,
-0xc6,
-0xc2,
-0x7c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xfe,
-0xc0,
-0xc0,
-0xc0,
-0xc0,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xfe,
-0x06,
-0x06,
-0x06,
-0x06,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x20,
-0xe0,
-0x63,
-0x66,
-0xfc,
-0x18,
-0x30,
-0x60,
-0xce,
-0x93,
-0x06,
-0x0c,
-0x1f,
-0x00,
-0x00,
-
-0x00,
-0x20,
-0xe0,
-0x63,
-0x66,
-0xfc,
-0x18,
-0x30,
-0x64,
-0xc8,
-0x96,
-0x3f,
-0x06,
-0x06,
-0x00,
-0x00,
-
-0x00,
-0x18,
-0x18,
-0x00,
-0x08,
-0x18,
-0x18,
-0x18,
-0x3c,
-0x3c,
-0x3c,
-0x3c,
-0x18,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x36,
-0x6c,
-0xd8,
-0xd8,
-0x6c,
-0x36,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xd8,
-0x6c,
-0x36,
-0x36,
-0x6c,
-0xd8,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x82,
-0x10,
-0x82,
-0x10,
-0x82,
-0x10,
-0x82,
-0x10,
-0x82,
-0x10,
-0x82,
-0x10,
-0x82,
-0x10,
-0x82,
-0x10,
-
-0x00,
-0x95,
-0x00,
-0xa9,
-0x00,
-0x95,
-0x00,
-0xa9,
-0x00,
-0x95,
-0x00,
-0xa9,
-0x00,
-0x95,
-0x00,
-0xa9,
-
-0x92,
-0x49,
-0x92,
-0x49,
-0x92,
-0x49,
-0x92,
-0x49,
-0x92,
-0x49,
-0x92,
-0x49,
-0x92,
-0x49,
-0x92,
-0x49,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xf8,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xf8,
-0x18,
-0x18,
-0xf8,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xe6,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xfe,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xf8,
-0x18,
-0x18,
-0xf8,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xe6,
-0x06,
-0x06,
-0xe6,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xfe,
-0x06,
-0x06,
-0xe6,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xe6,
-0x06,
-0x06,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xf8,
-0x18,
-0x18,
-0xf8,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xf8,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x1f,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xff,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x1f,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xff,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x1f,
-0x18,
-0x18,
-0x1f,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x67,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x67,
-0x60,
-0x60,
-0x7f,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7f,
-0x60,
-0x60,
-0x67,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xe7,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-0xe7,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x67,
-0x60,
-0x60,
-0x67,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xe7,
-0x00,
-0x00,
-0xe7,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xff,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xff,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0x00,
-0x00,
-0xff,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x7f,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x1f,
-0x18,
-0x18,
-0x1f,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x1f,
-0x18,
-0x18,
-0x1f,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7f,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0xff,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xff,
-0x00,
-0x00,
-0xff,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xf8,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x1f,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-0xf0,
-
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-0x0f,
-
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0xff,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x77,
-0xcc,
-0xcc,
-0xcc,
-0xcc,
-0xde,
-0x73,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x7c,
-0xc6,
-0xc6,
-0xc6,
-0xc4,
-0xc8,
-0xc4,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xdc,
-0xc0,
-0xc0,
-0x00,
-
-0x00,
-0xff,
-0x61,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0x60,
-0xf0,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x01,
-0x7e,
-0xa4,
-0x24,
-0x2c,
-0x6c,
-0x6c,
-0x6c,
-0x48,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xff,
-0xc1,
-0x60,
-0x30,
-0x18,
-0x0c,
-0x18,
-0x30,
-0x60,
-0xc0,
-0xc1,
-0xfe,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7f,
-0xc8,
-0xc8,
-0xc8,
-0xc8,
-0xc8,
-0xc8,
-0x70,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x22,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x7c,
-0x60,
-0x60,
-0x60,
-0xc0,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x76,
-0xdc,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x10,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x38,
-0x10,
-0x7c,
-0xd6,
-0xd6,
-0xd6,
-0xd6,
-0xd6,
-0xd6,
-0x7c,
-0x10,
-0x38,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x38,
-0x6c,
-0xc6,
-0xc6,
-0xc6,
-0xfe,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0x6c,
-0x38,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x3c,
-0x66,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0xc3,
-0x66,
-0x24,
-0x24,
-0xa5,
-0xe7,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x1e,
-0x31,
-0x30,
-0x18,
-0x0c,
-0x3e,
-0x66,
-0x66,
-0x66,
-0x66,
-0x66,
-0x3c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x6e,
-0xff,
-0x99,
-0x99,
-0x99,
-0x99,
-0xff,
-0x76,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x02,
-0x04,
-0x7c,
-0xca,
-0x92,
-0xa6,
-0x7c,
-0x40,
-0x80,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x1c,
-0x30,
-0x60,
-0x60,
-0x60,
-0x7c,
-0x60,
-0x60,
-0x60,
-0x60,
-0x30,
-0x1c,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x7c,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0xc6,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x7c,
-0x00,
-0x00,
-0x00,
-0xfe,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x18,
-0x18,
-0x7e,
-0x18,
-0x18,
-0x00,
-0x00,
-0x7e,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x30,
-0x18,
-0x0c,
-0x06,
-0x0c,
-0x18,
-0x30,
-0x00,
-0x7e,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x0c,
-0x18,
-0x30,
-0x60,
-0x30,
-0x18,
-0x0c,
-0x00,
-0x7e,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x0e,
-0x19,
-0x1b,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0x18,
-0xd8,
-0x98,
-0x70,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x18,
-0x18,
-0x00,
-0x7e,
-0x00,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x76,
-0xdc,
-0x00,
-0x00,
-0x76,
-0xdc,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x38,
-0x44,
-0x44,
-0x44,
-0x38,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x18,
-0x18,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x18,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x07,
-0x06,
-0x06,
-0x0c,
-0x0c,
-0x08,
-0x98,
-0xd0,
-0xf0,
-0x60,
-0x20,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0xcc,
-0x76,
-0x66,
-0x66,
-0x66,
-0x66,
-0xf7,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x70,
-0x98,
-0x18,
-0x30,
-0x60,
-0x88,
-0xf8,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x7c,
-0x64,
-0x64,
-0x64,
-0x64,
-0x64,
-0x7c,
-0x00,
-0x00,
-0x00,
-0x00,
-
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-0x00,
-
-};
-
-
-const struct font_desc font_rl = {
-	RL_IDX,
-	"RomanLarge",
-	8,
-	16,
-	patterns,
-	-1
-};
diff --git a/drivers/video/console/fonts.c b/drivers/video/console/fonts.c
index 9be83bed195..4fd07d9eca0 100644
--- a/drivers/video/console/fonts.c
+++ b/drivers/video/console/fonts.c
@@ -64,10 +64,6 @@ static const struct font_desc *fonts[] = {
 #undef NO_FONTS
     &font_mini_4x6,
 #endif
-#ifdef CONFIG_FONT_RL
-#undef NO_FONTS
-    &font_rl,
-#endif
 };
 
 #define num_fonts (sizeof(fonts)/sizeof(*fonts))
diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c
index 04417dc16c2..2584daec7bb 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/ffb.c
@@ -57,6 +57,9 @@ static struct fb_ops ffb_ops = {
 	.fb_sync		= ffb_sync,
 	.fb_mmap		= ffb_mmap,
 	.fb_ioctl		= ffb_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 /* Register layout and definitions */
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 84a7fe435bb..376d4a171ec 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -51,6 +51,9 @@ static struct fb_ops leo_ops = {
 	.fb_imageblit		= cfb_imageblit,
 	.fb_mmap		= leo_mmap,
 	.fb_ioctl		= leo_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 #define LEO_OFF_LC_SS0_KRN	0x00200000UL
diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/nvidia/nv_proto.h
index f60b1f43227..3353103e8b0 100644
--- a/drivers/video/nvidia/nv_proto.h
+++ b/drivers/video/nvidia/nv_proto.h
@@ -42,7 +42,7 @@ int nvidia_probe_i2c_connector(struct fb_info *info, int conn,
 #define nvidia_probe_i2c_connector(p, c, edid) (-1)
 #endif
 
-#ifdef CONFIG_FB_OF
+#ifdef CONFIG_PPC_OF
 int nvidia_probe_of_connector(struct fb_info *info, int conn,
 			      u8 ** out_edid);
 #else
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index 0b40a2a721c..bee09c6e48f 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -1301,7 +1301,7 @@ static int nvidiafb_pan_display(struct fb_var_screeninfo *var,
 	struct nvidia_par *par = info->par;
 	u32 total;
 
-	total = info->var.yoffset * info->fix.line_length + info->var.xoffset;
+	total = var->yoffset * info->fix.line_length + var->xoffset;
 
 	NVSetStartAddress(par, total);
 
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index 9aaf65fb623..18bcda23d2c 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -48,6 +48,9 @@ static struct fb_ops p9100_ops = {
 	.fb_imageblit		= cfb_imageblit,
 	.fb_mmap		= p9100_mmap,
 	.fb_ioctl		= p9100_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 /* P9100 control registers */
diff --git a/drivers/video/sbuslib.c b/drivers/video/sbuslib.c
index 34f72edba82..646c43f921c 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/sbuslib.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2003 David S. Miller (davem@redhat.com)
  */
 
+#include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/string.h>
@@ -182,3 +183,109 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
 	};
 }
 EXPORT_SYMBOL(sbusfb_ioctl_helper);
+
+#ifdef CONFIG_COMPAT
+struct  fbcmap32 {
+	int             index;          /* first element (0 origin) */
+	int             count;
+	u32		red;
+	u32		green;
+	u32		blue;
+};
+
+#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
+
+static int fbiogetputcmap(struct file *file, struct fb_info *info,
+		unsigned int cmd, unsigned long arg)
+{
+	struct fbcmap32 __user *argp = (void __user *)arg;
+	struct fbcmap __user *p = compat_alloc_user_space(sizeof(*p));
+	u32 addr;
+	int ret;
+
+	ret = copy_in_user(p, argp, 2 * sizeof(int));
+	ret |= get_user(addr, &argp->red);
+	ret |= put_user(compat_ptr(addr), &p->red);
+	ret |= get_user(addr, &argp->green);
+	ret |= put_user(compat_ptr(addr), &p->green);
+	ret |= get_user(addr, &argp->blue);
+	ret |= put_user(compat_ptr(addr), &p->blue);
+	if (ret)
+		return -EFAULT;
+	return info->fbops->fb_ioctl(file->f_dentry->d_inode, file,
+			(cmd == FBIOPUTCMAP32) ?
+			FBIOPUTCMAP_SPARC : FBIOGETCMAP_SPARC,
+			(unsigned long)p, info);
+}
+
+struct fbcursor32 {
+	short set;		/* what to set, choose from the list above */
+	short enable;		/* cursor on/off */
+	struct fbcurpos pos;	/* cursor position */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fbcmap32 cmap;	/* color map info */
+	struct fbcurpos size;	/* cursor bit map size */
+	u32	image;		/* cursor image bits */
+	u32	mask;		/* cursor mask bits */
+};
+
+#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
+
+static int fbiogscursor(struct file *file, struct fb_info *info,
+		unsigned long arg)
+{
+	struct fbcursor __user *p = compat_alloc_user_space(sizeof(*p));
+	struct fbcursor32 __user *argp =  (void __user *)arg;
+	compat_uptr_t addr;
+	int ret;
+
+	ret = copy_in_user(p, argp,
+			      2 * sizeof (short) + 2 * sizeof(struct fbcurpos));
+	ret |= copy_in_user(&p->size, &argp->size, sizeof(struct fbcurpos));
+	ret |= copy_in_user(&p->cmap, &argp->cmap, 2 * sizeof(int));
+	ret |= get_user(addr, &argp->cmap.red);
+	ret |= put_user(compat_ptr(addr), &p->cmap.red);
+	ret |= get_user(addr, &argp->cmap.green);
+	ret |= put_user(compat_ptr(addr), &p->cmap.green);
+	ret |= get_user(addr, &argp->cmap.blue);
+	ret |= put_user(compat_ptr(addr), &p->cmap.blue);
+	ret |= get_user(addr, &argp->mask);
+	ret |= put_user(compat_ptr(addr), &p->mask);
+	ret |= get_user(addr, &argp->image);
+	ret |= put_user(compat_ptr(addr), &p->image);
+	if (ret)
+		return -EFAULT;
+	return info->fbops->fb_ioctl(file->f_dentry->d_inode, file,
+			FBIOSCURSOR, (unsigned long)p, info);
+}
+
+long sbusfb_compat_ioctl(struct file *file, unsigned int cmd,
+		unsigned long arg, struct fb_info *info)
+{
+	switch (cmd) {
+	case FBIOGTYPE:
+	case FBIOSATTR:
+	case FBIOGATTR:
+	case FBIOSVIDEO:
+	case FBIOGVIDEO:
+	case FBIOGCURSOR32:	/* This is not implemented yet.
+				   Later it should be converted... */
+	case FBIOSCURPOS:
+	case FBIOGCURPOS:
+	case FBIOGCURMAX:
+		return info->fbops->fb_ioctl(file->f_dentry->d_inode,
+				file, cmd, arg, info);
+	case FBIOPUTCMAP32:
+		return fbiogetputcmap(file, info, cmd, arg);
+	case FBIOGETCMAP32:
+		return fbiogetputcmap(file, info, cmd, arg);
+	case FBIOSCURSOR32:
+		return fbiogscursor(file, info, arg);
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+EXPORT_SYMBOL(sbusfb_compat_ioctl);
+#endif
diff --git a/drivers/video/sbuslib.h b/drivers/video/sbuslib.h
index a6aa33ba09d..b470e52ce9e 100644
--- a/drivers/video/sbuslib.h
+++ b/drivers/video/sbuslib.h
@@ -20,5 +20,7 @@ extern int sbusfb_mmap_helper(struct sbus_mmap_map *map,
 int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
 			struct fb_info *info,
 			int type, int fb_depth, unsigned long fb_size);
+long sbusfb_compat_ioctl(struct file *file, unsigned int cmd,
+		unsigned long arg, struct fb_info *info);
 
 #endif /* _SBUSLIB_H */
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index 59fff29bc02..fe4f63f3849 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -52,6 +52,9 @@ static struct fb_ops tcx_ops = {
 	.fb_imageblit		= cfb_imageblit,
 	.fb_mmap		= tcx_mmap,
 	.fb_ioctl		= tcx_ioctl,
+#ifdef CONFIG_COMPAT
+	.fb_compat_ioctl	= sbusfb_compat_ioctl,
+#endif
 };
 
 /* THC definitions */
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index 2c3aa2fcfd9..3e58ddc2bc3 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -413,6 +413,7 @@ static int __init vesafb_probe(struct platform_device *dev)
 	 * region already (FIXME) */
 	request_region(0x3c0, 32, "vesafb");
 
+#ifdef CONFIG_MTRR
 	if (mtrr) {
 		unsigned int temp_size = size_total;
 		unsigned int type = 0;
@@ -450,6 +451,7 @@ static int __init vesafb_probe(struct platform_device *dev)
 			} while (temp_size >= PAGE_SIZE && rc == -EINVAL);
 		}
 	}
+#endif
 	
 	info->fbops = &vesafb_ops;
 	info->var = vesafb_defined;
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index daa46051f55..f6e24ee85f0 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -514,7 +514,7 @@ int __init w100fb_probe(struct platform_device *pdev)
 	if (remapped_fbuf == NULL)
 		goto out;
 
-	info=framebuffer_alloc(sizeof(struct w100fb_par), dev);
+	info=framebuffer_alloc(sizeof(struct w100fb_par), &pdev->dev);
 	if (!info) {
 		err = -ENOMEM;
 		goto out;