Merge branch 'x86/urgent' into x86/core

71 files changed, 930 insertions, 318 deletions

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0b299b0f817..714cb046b59 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
 	else
 		iowrite32_rep(data_addr, buf, words);
 
+	/* Transfer trailing bytes, if any */
 	if (unlikely(slop)) {
-		__le32 pad;
+		unsigned char pad[4];
+
+		/* Point buf to the tail of buffer */
+		buf += buflen - slop;
+
+		/*
+		 * Use io*_rep() accessors here as well to avoid pointlessly
+		 * swapping bytes to and fro on the big endian machines...
+		 */
 		if (rw == READ) {
-			pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
-			memcpy(buf + buflen - slop, &pad, slop);
+			if (slop < 3)
+				ioread16_rep(data_addr, pad, 1);
+			else
+				ioread32_rep(data_addr, pad, 1);
+			memcpy(buf, pad, slop);
 		} else {
-			memcpy(&pad, buf + buflen - slop, slop);
-			iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+			memcpy(pad, buf, slop);
+			if (slop < 3)
+				iowrite16_rep(data_addr, pad, 1);
+			else
+				iowrite32_rep(data_addr, pad, 1);
 		}
-		words++;
 	}
-	return words << 2;
+	return (buflen + 1) & ~1;
 }
 EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 79a6c9a0b72..ba556d3e696 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -110,7 +110,8 @@ static const struct via_isa_bridge {
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
-	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
+	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+	{ "vt6415",	PCI_DEVICE_ID_VIA_6415,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
 	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@@ -593,6 +594,7 @@ static int via_reinit_one(struct pci_dev *pdev)
 #endif
 
 static const struct pci_device_id via[] = {
+	{ PCI_VDEVICE(VIA, 0x0415), },
 	{ PCI_VDEVICE(VIA, 0x0571), },
 	{ PCI_VDEVICE(VIA, 0x0581), },
 	{ PCI_VDEVICE(VIA, 0x1571), },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 444af0415ca..55a8eed3f3a 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -421,19 +421,21 @@ static struct ata_port_operations nv_generic_ops = {
 	.hardreset		= ATA_OP_NULL,
 };
 
-/* OSDL bz3352 reports that nf2/3 controllers can't determine device
- * signature reliably.  Also, the following thread reports detection
- * failure on cold boot with the standard debouncing timing.
+/* nf2 is ripe with hardreset related problems.
+ *
+ * kernel bz#3352 reports nf2/3 controllers can't determine device
+ * signature reliably.  The following thread reports detection failure
+ * on cold boot with the standard debouncing timing.
  *
  * http://thread.gmane.org/gmane.linux.ide/34098
  *
- * Debounce with hotplug timing and request follow-up SRST.
+ * And bz#12176 reports that hardreset simply doesn't work on nf2.
+ * Give up on it and just don't do hardreset.
  */
 static struct ata_port_operations nv_nf2_ops = {
-	.inherits		= &nv_common_ops,
+	.inherits		= &nv_generic_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
-	.hardreset		= nv_noclassify_hardreset,
 };
 
 /* For initial probing after boot and hot plugging, hardreset mostly
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index c237527b1aa..5e41e6dd657 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -18,6 +18,7 @@
 enum {
 	AOECMD_ATA,
 	AOECMD_CFG,
+	AOECMD_VEND_MIN = 0xf0,
 
 	AOEFL_RSP = (1<<3),
 	AOEFL_ERR = (1<<2),
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 30de5b1c647..c6099ba9a4b 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -142,6 +142,8 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt,
 		aoecmd_cfg_rsp(skb);
 		break;
 	default:
+		if (h->cmd >= AOECMD_VEND_MIN)
+			break;	/* don't complain about vendor commands */
 		printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd);
 	}
 exit:
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 01e69383d9c..d2cb67b6117 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3390,6 +3390,203 @@ static void free_hba(int i)
 	kfree(p);
 }
 
+/* Send a message CDB to the firmware. */
+static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
+{
+	typedef struct {
+		CommandListHeader_struct CommandHeader;
+		RequestBlock_struct Request;
+		ErrDescriptor_struct ErrorDescriptor;
+	} Command;
+	static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
+	Command *cmd;
+	dma_addr_t paddr64;
+	uint32_t paddr32, tag;
+	void __iomem *vaddr;
+	int i, err;
+
+	vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+	if (vaddr == NULL)
+		return -ENOMEM;
+
+	/* The Inbound Post Queue only accepts 32-bit physical addresses for the
+	   CCISS commands, so they must be allocated from the lower 4GiB of
+	   memory. */
+	err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	if (err) {
+		iounmap(vaddr);
+		return -ENOMEM;
+	}
+
+	cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+	if (cmd == NULL) {
+		iounmap(vaddr);
+		return -ENOMEM;
+	}
+
+	/* This must fit, because of the 32-bit consistent DMA mask.  Also,
+	   although there's no guarantee, we assume that the address is at
+	   least 4-byte aligned (most likely, it's page-aligned). */
+	paddr32 = paddr64;
+
+	cmd->CommandHeader.ReplyQueue = 0;
+	cmd->CommandHeader.SGList = 0;
+	cmd->CommandHeader.SGTotal = 0;
+	cmd->CommandHeader.Tag.lower = paddr32;
+	cmd->CommandHeader.Tag.upper = 0;
+	memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+
+	cmd->Request.CDBLen = 16;
+	cmd->Request.Type.Type = TYPE_MSG;
+	cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+	cmd->Request.Type.Direction = XFER_NONE;
+	cmd->Request.Timeout = 0; /* Don't time out */
+	cmd->Request.CDB[0] = opcode;
+	cmd->Request.CDB[1] = type;
+	memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
+
+	cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
+	cmd->ErrorDescriptor.Addr.upper = 0;
+	cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
+
+	writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+
+	for (i = 0; i < 10; i++) {
+		tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+		if ((tag & ~3) == paddr32)
+			break;
+		schedule_timeout_uninterruptible(HZ);
+	}
+
+	iounmap(vaddr);
+
+	/* we leak the DMA buffer here ... no choice since the controller could
+	   still complete the command. */
+	if (i == 10) {
+		printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+			opcode, type);
+		return -ETIMEDOUT;
+	}
+
+	pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+
+	if (tag & 2) {
+		printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+			opcode, type);
+		return -EIO;
+	}
+
+	printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+		opcode, type);
+	return 0;
+}
+
+#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
+#define cciss_noop(p) cciss_message(p, 3, 0)
+
+static __devinit int cciss_reset_msi(struct pci_dev *pdev)
+{
+/* the #defines are stolen from drivers/pci/msi.h. */
+#define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE		(1 << 15)
+
+	int pos;
+	u16 control = 0;
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+	if (pos) {
+		pci_read_config_word(pdev, msi_control_reg(pos), &control);
+		if (control & PCI_MSI_FLAGS_ENABLE) {
+			printk(KERN_INFO "cciss: resetting MSI\n");
+			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
+		}
+	}
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+	if (pos) {
+		pci_read_config_word(pdev, msi_control_reg(pos), &control);
+		if (control & PCI_MSIX_FLAGS_ENABLE) {
+			printk(KERN_INFO "cciss: resetting MSI-X\n");
+			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
+		}
+	}
+
+	return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states. */
+static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+{
+	u16 pmcsr, saved_config_space[32];
+	int i, pos;
+
+	printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+
+	/* This is very nearly the same thing as
+
+	   pci_save_state(pci_dev);
+	   pci_set_power_state(pci_dev, PCI_D3hot);
+	   pci_set_power_state(pci_dev, PCI_D0);
+	   pci_restore_state(pci_dev);
+
+	   but we can't use these nice canned kernel routines on
+	   kexec, because they also check the MSI/MSI-X state in PCI
+	   configuration space and do the wrong thing when it is
+	   set/cleared.  Also, the pci_save/restore_state functions
+	   violate the ordering requirements for restoring the
+	   configuration space from the CCISS document (see the
+	   comment below).  So we roll our own .... */
+
+	for (i = 0; i < 32; i++)
+		pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	if (pos == 0) {
+		printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+		return -ENODEV;
+	}
+
+	/* Quoting from the Open CISS Specification: "The Power
+	 * Management Control/Status Register (CSR) controls the power
+	 * state of the device.  The normal operating state is D0,
+	 * CSR=00h.  The software off state is D3, CSR=03h.  To reset
+	 * the controller, place the interface device in D3 then to
+	 * D0, this causes a secondary PCI reset which will reset the
+	 * controller." */
+
+	/* enter the D3hot power management state */
+	pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+	pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+	pmcsr |= PCI_D3hot;
+	pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+	schedule_timeout_uninterruptible(HZ >> 1);
+
+	/* enter the D0 power management state */
+	pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+	pmcsr |= PCI_D0;
+	pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+	schedule_timeout_uninterruptible(HZ >> 1);
+
+	/* Restore the PCI configuration space.  The Open CISS
+	 * Specification says, "Restore the PCI Configuration
+	 * Registers, offsets 00h through 60h. It is important to
+	 * restore the command register, 16-bits at offset 04h,
+	 * last. Do not restore the configuration status register,
+	 * 16-bits at offset 06h."  Note that the offset is 2*i. */
+	for (i = 0; i < 32; i++) {
+		if (i == 2 || i == 3)
+			continue;
+		pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+	}
+	wmb();
+	pci_write_config_word(pdev, 4, saved_config_space[2]);
+
+	return 0;
+}
+
 /*
  *  This is it.  Find all the controllers and register them.  I really hate
  *  stealing all these major device numbers.
@@ -3404,6 +3601,24 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	int dac, return_code;
 	InquiryData_struct *inq_buff = NULL;
 
+	if (reset_devices) {
+		/* Reset the controller with a PCI power-cycle */
+		if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+			return -ENODEV;
+
+		/* Some devices (notably the HP Smart Array 5i Controller)
+		   need a little pause here */
+		schedule_timeout_uninterruptible(30*HZ);
+
+		/* Now try to get the controller to respond to a no-op */
+		for (i=0; i<12; i++) {
+			if (cciss_noop(pdev) == 0)
+				break;
+			else
+				printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
+		}
+	}
+
 	i = alloc_cciss_hba();
 	if (i < 0)
 		return -1;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cf29cc4e6ab..83d8ed39433 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -558,6 +558,8 @@ static void process_fd_request(void);
 static void recalibrate_floppy(void);
 static void floppy_shutdown(unsigned long);
 
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
 static int floppy_grab_irq_and_dma(void);
 static void floppy_release_irq_and_dma(void);
 
@@ -4274,8 +4276,7 @@ static int __init floppy_init(void)
 		FDCS->rawcmd = 2;
 		if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
 			/* free ioports reserved by floppy_grab_irq_and_dma() */
-			release_region(FDCS->address + 2, 4);
-			release_region(FDCS->address + 7, 1);
+			floppy_release_regions(fdc);
 			FDCS->address = -1;
 			FDCS->version = FDC_NONE;
 			continue;
@@ -4284,8 +4285,7 @@ static int __init floppy_init(void)
 		FDCS->version = get_fdc_version();
 		if (FDCS->version == FDC_NONE) {
 			/* free ioports reserved by floppy_grab_irq_and_dma() */
-			release_region(FDCS->address + 2, 4);
-			release_region(FDCS->address + 7, 1);
+			floppy_release_regions(fdc);
 			FDCS->address = -1;
 			continue;
 		}
@@ -4358,6 +4358,47 @@ out_put_disk:
 
 static DEFINE_SPINLOCK(floppy_usage_lock);
 
+static const struct io_region {
+	int offset;
+	int size;
+} io_regions[] = {
+	{ 2, 1 },
+	/* address + 3 is sometimes reserved by pnp bios for motherboard */
+	{ 4, 2 },
+	/* address + 6 is reserved, and may be taken by IDE.
+	 * Unfortunately, Adaptec doesn't know this :-(, */
+	{ 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+	while (p != io_regions) {
+		p--;
+		release_region(FDCS->address + p->offset, p->size);
+	}
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+	const struct io_region *p;
+
+	for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+		if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
+			DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+			floppy_release_allocated_regions(fdc, p);
+			return -EBUSY;
+		}
+	}
+	return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+	floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
 static int floppy_grab_irq_and_dma(void)
 {
 	unsigned long flags;
@@ -4399,18 +4440,8 @@ static int floppy_grab_irq_and_dma(void)
 
 	for (fdc = 0; fdc < N_FDC; fdc++) {
 		if (FDCS->address != -1) {
-			if (!request_region(FDCS->address + 2, 4, "floppy")) {
-				DPRINT("Floppy io-port 0x%04lx in use\n",
-				       FDCS->address + 2);
-				goto cleanup1;
-			}
-			if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
-				DPRINT("Floppy io-port 0x%04lx in use\n",
-				       FDCS->address + 7);
-				goto cleanup2;
-			}
-			/* address + 6 is reserved, and may be taken by IDE.
-			 * Unfortunately, Adaptec doesn't know this :-(, */
+			if (floppy_request_regions(fdc))
+				goto cleanup;
 		}
 	}
 	for (fdc = 0; fdc < N_FDC; fdc++) {
@@ -4432,15 +4463,11 @@ static int floppy_grab_irq_and_dma(void)
 	fdc = 0;
 	irqdma_allocated = 1;
 	return 0;
-cleanup2:
-	release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
 	fd_free_irq();
 	fd_free_dma();
-	while (--fdc >= 0) {
-		release_region(FDCS->address + 2, 4);
-		release_region(FDCS->address + 7, 1);
-	}
+	while (--fdc >= 0)
+		floppy_release_regions(fdc);
 	spin_lock_irqsave(&floppy_usage_lock, flags);
 	usage_count--;
 	spin_unlock_irqrestore(&floppy_usage_lock, flags);
@@ -4501,10 +4528,8 @@ static void floppy_release_irq_and_dma(void)
 #endif
 	old_fdc = fdc;
 	for (fdc = 0; fdc < N_FDC; fdc++)
-		if (FDCS->address != -1) {
-			release_region(FDCS->address + 2, 4);
-			release_region(FDCS->address + 7, 1);
-		}
+		if (FDCS->address != -1)
+			floppy_release_regions(fdc);
 	fdc = old_fdc;
 }
 
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 9dfa2716300..c397b3ddba9 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -422,7 +422,7 @@ static void xs(char *buf, char *targ, int len)
 
 	for (k = 0; k < len; k++) {
 		char c = *buf++;
-		if (c != ' ' || c != l)
+		if (c != ' ' && c != l)
 			l = *targ++ = c;
 	}
 	if (l == ' ')
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index a58993011ed..280a9d263eb 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -518,6 +518,7 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v
 				       dma_chan_name(chan), err);
 			else
 				break;
+			chan->private = NULL;
 			chan = NULL;
 		}
 	}
@@ -536,6 +537,7 @@ void dma_release_channel(struct dma_chan *chan)
 	WARN_ONCE(chan->client_count != 1,
 		  "chan reference count %d != 1\n", chan->client_count);
 	dma_chan_put(chan);
+	chan->private = NULL;
 	mutex_unlock(&dma_list_mutex);
 }
 EXPORT_SYMBOL_GPL(dma_release_channel);
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 6b702cc46b3..a97c07eef7e 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -560,7 +560,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		unsigned long flags)
 {
 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
-	struct dw_dma_slave	*dws = dwc->dws;
+	struct dw_dma_slave	*dws = chan->private;
 	struct dw_desc		*prev;
 	struct dw_desc		*first;
 	u32			ctllo;
@@ -790,7 +790,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)
 	cfghi = DWC_CFGH_FIFO_MODE;
 	cfglo = 0;
 
-	dws = dwc->dws;
+	dws = chan->private;
 	if (dws) {
 		/*
 		 * We need controller-specific data to set up slave
@@ -866,7 +866,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
 	spin_lock_bh(&dwc->lock);
 	list_splice_init(&dwc->free_list, &list);
 	dwc->descs_allocated = 0;
-	dwc->dws = NULL;
 
 	/* Disable interrupts */
 	channel_clear_bit(dw, MASK.XFER, dwc->mask);
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 00fdd187bb0..b252b202c5c 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -139,8 +139,6 @@ struct dw_dma_chan {
 	struct list_head	queue;
 	struct list_head	free_list;
 
-	struct dw_dma_slave	*dws;
-
 	unsigned int		descs_allocated;
 };
 
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 261b9aa3f24..05aa2d406ac 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -1,7 +1,7 @@
 /*
  * linux/drivers/firmware/memmap.c
  *  Copyright (C) 2008 SUSE LINUX Products GmbH
- *  by Bernhard Walle <bwalle@suse.de>
+ *  by Bernhard Walle <bernhard.walle@gmx.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License v2.0 as published by
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4be3acbaaf9..3a22eb9be37 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -80,18 +80,17 @@ config DRM_I915
 	  XFree86 4.4 and above. If unsure, build this and i830 as modules and
 	  the X server will load the correct one.
 
-endchoice
-
 config DRM_I915_KMS
 	bool "Enable modesetting on intel by default"
 	depends on DRM_I915
 	help
-	Choose this option if you want kernel modesetting enabled by default,
-	and you have a new enough userspace to support this. Running old
-	userspaces with this enabled will cause pain.  Note that this causes
-	the driver to bind to PCI devices, which precludes loading things
-	like intelfb.
+	  Choose this option if you want kernel modesetting enabled by default,
+	  and you have a new enough userspace to support this. Running old
+	  userspaces with this enabled will cause pain.  Note that this causes
+	  the driver to bind to PCI devices, which precludes loading things
+	  like intelfb.
 
+endchoice
 
 config DRM_MGA
 	tristate "Matrox g200/g400"
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 6cad69ed21c..1cc967448f4 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1300,7 +1300,13 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
@@ -1605,6 +1611,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
@@ -1612,10 +1619,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
@@ -1626,8 +1629,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 	{ }
 };
 
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e899f510ebe..88511970508 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -348,6 +348,9 @@
 #define USB_VENDOR_ID_PLAYDOTCOM	0x0b43
 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII	0x0003
 
+#define USB_VENDOR_ID_POWERCOM		0x0d9f
+#define USB_DEVICE_ID_POWERCOM_UPS	0x0002
+
 #define USB_VENDOR_ID_SAITEK		0x06a3
 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD	0xff17
 
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 73244962897..02b19db5442 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -267,8 +267,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 		default:
 			{
 				struct hid_device *hid = dev->hid;
-				if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
-					return -EINVAL;
+				if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) {
+					ret = -EINVAL;
+					break;
+				}
 
 				if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
 					int len;
@@ -277,8 +279,9 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 					len = strlen(hid->name) + 1;
 					if (len > _IOC_SIZE(cmd))
 						len = _IOC_SIZE(cmd);
-					return copy_to_user(user_arg, hid->name, len) ?
+					ret = copy_to_user(user_arg, hid->name, len) ?
 						-EFAULT : len;
+					break;
 				}
 
 				if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
@@ -288,12 +291,13 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 					len = strlen(hid->phys) + 1;
 					if (len > _IOC_SIZE(cmd))
 						len = _IOC_SIZE(cmd);
-					return copy_to_user(user_arg, hid->phys, len) ?
+					ret = copy_to_user(user_arg, hid->phys, len) ?
 						-EFAULT : len;
+					break;
 				}
                 }
 
-			ret = -ENOTTY;
+		ret = -ENOTTY;
 	}
 	unlock_kernel();
 	return ret;
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 609cafff86b..5f81ddf7150 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1872,7 +1872,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = superio_inw(sioaddr, SIO_REG_MANID);
 	if (devid != SIO_FINTEK_ID) {
-		printk(KERN_INFO DRVNAME ": Not a Fintek device\n");
+		pr_debug(DRVNAME ": Not a Fintek device\n");
 		goto exit;
 	}
 
@@ -1932,7 +1932,7 @@ static int __init f71882fg_device_add(unsigned short address,
 	res.name = f71882fg_pdev->name;
 	err = acpi_check_resource_conflict(&res);
 	if (err)
-		return err;
+		goto exit_device_put;
 
 	err = platform_device_add_resources(f71882fg_pdev, &res, 1);
 	if (err) {
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index abf4dfc8ec2..29c83b5b969 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -166,6 +166,18 @@ static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3};
 	},						\
 	.driver_data = &lis3lv02d_axis_##_axis		\
 }
+
+#define AXIS_DMI_MATCH2(_ident, _class1, _name1,	\
+				_class2, _name2,	\
+				_axis) {		\
+	.ident = _ident,				\
+	.callback = lis3lv02d_dmi_matched,		\
+	.matches = {					\
+		DMI_MATCH(DMI_##_class1, _name1),	\
+		DMI_MATCH(DMI_##_class2, _name2),	\
+	},						\
+	.driver_data = &lis3lv02d_axis_##_axis		\
+}
 static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	/* product names are truncated to match all kinds of a same model */
 	AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
@@ -179,6 +191,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
 	AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
 	AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+	/* Intel-based HP Pavilion dv5 */
+	AXIS_DMI_MATCH2("HPDV5_I",
+			PRODUCT_NAME, "HP Pavilion dv5",
+			BOARD_NAME, "3603",
+			x_inverted),
+	/* AMD-based HP Pavilion dv5 */
+	AXIS_DMI_MATCH2("HPDV5_A",
+			PRODUCT_NAME, "HP Pavilion dv5",
+			BOARD_NAME, "3600",
+			y_inverted),
 	{ NULL, }
 /* Laptop models without axis info (yet):
  * "NC6910" "HP Compaq 6910"
@@ -213,9 +235,49 @@ static struct delayed_led_classdev hpled_led = {
 	.set_brightness = hpled_set,
 };
 
+static acpi_status
+lis3lv02d_get_resource(struct acpi_resource *resource, void *context)
+{
+	if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
+		struct acpi_resource_extended_irq *irq;
+		u32 *device_irq = context;
+
+		irq = &resource->data.extended_irq;
+		*device_irq = irq->interrupts[0];
+	}
+
+	return AE_OK;
+}
+
+static void lis3lv02d_enum_resources(struct acpi_device *device)
+{
+	acpi_status status;
+
+	status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+					lis3lv02d_get_resource, &adev.irq);
+	if (ACPI_FAILURE(status))
+		printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
+}
+
+static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+{
+	u8 lo, hi;
+
+	adev.read(handle, reg - 1, &lo);
+	adev.read(handle, reg, &hi);
+	/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+	return (s16)((hi << 8) | lo);
+}
+
+static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
+{
+	s8 lo;
+	adev.read(handle, reg, &lo);
+	return lo;
+}
+
 static int lis3lv02d_add(struct acpi_device *device)
 {
-	u8 val;
 	int ret;
 
 	if (!device)
@@ -229,10 +291,22 @@ static int lis3lv02d_add(struct acpi_device *device)
 	strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
 	device->driver_data = &adev;
 
-	lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
-	if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
+	lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami);
+	switch (adev.whoami) {
+	case LIS_DOUBLE_ID:
+		printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
+		adev.read_data = lis3lv02d_read_16;
+		adev.mdps_max_val = 2048;
+		break;
+	case LIS_SINGLE_ID:
+		printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+		adev.read_data = lis3lv02d_read_8;
+		adev.mdps_max_val = 128;
+		break;
+	default:
 		printk(KERN_ERR DRIVER_NAME
-				": Accelerometer chip not LIS3LV02D{L,Q}\n");
+			": unknown sensor type 0x%X\n", adev.whoami);
+		return -EINVAL;
 	}
 
 	/* If possible use a "standard" axes order */
@@ -247,6 +321,9 @@ static int lis3lv02d_add(struct acpi_device *device)
 	if (ret)
 		return ret;
 
+	/* obtain IRQ number of our device from ACPI */
+	lis3lv02d_enum_resources(adev.device);
+
 	ret = lis3lv02d_init_device(&adev);
 	if (ret) {
 		flush_work(&hpled_led.work);
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 219d2d0d5a6..8bb2158f045 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2007-2008 Yan Burman
  *  Copyright (C) 2008 Eric Piel
- *  Copyright (C) 2008 Pavel Machek
+ *  Copyright (C) 2008-2009 Pavel Machek
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -35,6 +35,7 @@
 #include <linux/poll.h>
 #include <linux/freezer.h>
 #include <linux/uaccess.h>
+#include <linux/miscdevice.h>
 #include <acpi/acpi_drivers.h>
 #include <asm/atomic.h>
 #include "lis3lv02d.h"
@@ -52,24 +53,14 @@
  * joystick.
  */
 
-/* Maximum value our axis may get for the input device (signed 12 bits) */
-#define MDPS_MAX_VAL 2048
+struct acpi_lis3lv02d adev = {
+	.misc_wait   = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
+};
 
-struct acpi_lis3lv02d adev;
 EXPORT_SYMBOL_GPL(adev);
 
 static int lis3lv02d_add_fs(struct acpi_device *device);
 
-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
-{
-	u8 lo, hi;
-
-	adev.read(handle, reg, &lo);
-	adev.read(handle, reg + 1, &hi);
-	/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
-	return (s16)((hi << 8) | lo);
-}
-
 /**
  * lis3lv02d_get_axis - For the given axis, give the value converted
  * @axis:      1,2,3 - can also be negative
@@ -98,9 +89,9 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
 {
 	int position[3];
 
-	position[0] = lis3lv02d_read_16(handle, OUTX_L);
-	position[1] = lis3lv02d_read_16(handle, OUTY_L);
-	position[2] = lis3lv02d_read_16(handle, OUTZ_L);
+	position[0] = adev.read_data(handle, OUTX);
+	position[1] = adev.read_data(handle, OUTY);
+	position[2] = adev.read_data(handle, OUTZ);
 
 	*x = lis3lv02d_get_axis(adev.ac.x, position);
 	*y = lis3lv02d_get_axis(adev.ac.y, position);
@@ -110,26 +101,13 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
 void lis3lv02d_poweroff(acpi_handle handle)
 {
 	adev.is_on = 0;
-	/* disable X,Y,Z axis and power down */
-	adev.write(handle, CTRL_REG1, 0x00);
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
 
 void lis3lv02d_poweron(acpi_handle handle)
 {
-	u8 val;
-
 	adev.is_on = 1;
 	adev.init(handle);
-	adev.write(handle, FF_WU_CFG, 0);
-	/*
-	 * BDU: LSB and MSB values are not updated until both have been read.
-	 *      So the value read will always be correct.
-	 * IEN: Interrupt for free-fall and DD, not for data-ready.
-	 */
-	adev.read(handle, CTRL_REG2, &val);
-	val |= CTRL2_BDU | CTRL2_IEN;
-	adev.write(handle, CTRL_REG2, val);
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
 
@@ -162,6 +140,140 @@ static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
 	mutex_unlock(&dev->lock);
 }
 
+static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+{
+	/*
+	 * Be careful: on some HP laptops the bios force DD when on battery and
+	 * the lid is closed. This leads to interrupts as soon as a little move
+	 * is done.
+	 */
+	atomic_inc(&adev.count);
+
+	wake_up_interruptible(&adev.misc_wait);
+	kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
+	return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
+	int ret;
+
+	if (test_and_set_bit(0, &adev.misc_opened))
+		return -EBUSY; /* already open */
+
+	atomic_set(&adev.count, 0);
+
+	/*
+	 * The sensor can generate interrupts for free-fall and direction
+	 * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+	 * the things simple and _fast_ we activate it only for free-fall, so
+	 * no need to read register (very slow with ACPI). For the same reason,
+	 * we forbid shared interrupts.
+	 *
+	 * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+	 * io-apic is not configurable (and generates a warning) but I keep it
+	 * in case of support for other hardware.
+	 */
+	ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
+			  DRIVER_NAME, &adev);
+
+	if (ret) {
+		clear_bit(0, &adev.misc_opened);
+		printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
+		return -EBUSY;
+	}
+	lis3lv02d_increase_use(&adev);
+	printk("lis3: registered interrupt %d\n", adev.irq);
+	return 0;
+}
+
+static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+{
+	fasync_helper(-1, file, 0, &adev.async_queue);
+	lis3lv02d_decrease_use(&adev);
+	free_irq(adev.irq, &adev);
+	clear_bit(0, &adev.misc_opened); /* release the device */
+	return 0;
+}
+
+static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+				size_t count, loff_t *pos)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	u32 data;
+	unsigned char byte_data;
+	ssize_t retval = 1;
+
+	if (count < 1)
+		return -EINVAL;
+
+	add_wait_queue(&adev.misc_wait, &wait);
+	while (true) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		data = atomic_xchg(&adev.count, 0);
+		if (data)
+			break;
+
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto out;
+		}
+
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			goto out;
+		}
+
+		schedule();
+	}
+
+	if (data < 255)
+		byte_data = data;
+	else
+		byte_data = 255;
+
+	/* make sure we are not going into copy_to_user() with
+	 * TASK_INTERRUPTIBLE state */
+	set_current_state(TASK_RUNNING);
+	if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+		retval = -EFAULT;
+
+out:
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&adev.misc_wait, &wait);
+
+	return retval;
+}
+
+static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &adev.misc_wait, wait);
+	if (atomic_read(&adev.count))
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+{
+	return fasync_helper(fd, file, on, &adev.async_queue);
+}
+
+static const struct file_operations lis3lv02d_misc_fops = {
+	.owner   = THIS_MODULE,
+	.llseek  = no_llseek,
+	.read    = lis3lv02d_misc_read,
+	.open    = lis3lv02d_misc_open,
+	.release = lis3lv02d_misc_release,
+	.poll    = lis3lv02d_misc_poll,
+	.fasync  = lis3lv02d_misc_fasync,
+};
+
+static struct miscdevice lis3lv02d_misc_device = {
+	.minor   = MISC_DYNAMIC_MINOR,
+	.name    = "freefall",
+	.fops    = &lis3lv02d_misc_fops,
+};
+
 /**
  * lis3lv02d_joystick_kthread - Kthread polling function
  * @data: unused - here to conform to threadfn prototype
@@ -203,7 +315,6 @@ static void lis3lv02d_joystick_close(struct input_dev *input)
 	lis3lv02d_decrease_use(&adev);
 }
 
-
 static inline void lis3lv02d_calibrate_joystick(void)
 {
 	lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
@@ -231,9 +342,9 @@ int lis3lv02d_joystick_enable(void)
 	adev.idev->close      = lis3lv02d_joystick_close;
 
 	set_bit(EV_ABS, adev.idev->evbit);
-	input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
-	input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
-	input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+	input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+	input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+	input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
 
 	err = input_register_device(adev.idev);
 	if (err) {
@@ -250,6 +361,7 @@ void lis3lv02d_joystick_disable(void)
 	if (!adev.idev)
 		return;
 
+	misc_deregister(&lis3lv02d_misc_device);
 	input_unregister_device(adev.idev);
 	adev.idev = NULL;
 }
@@ -268,6 +380,19 @@ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
 	if (lis3lv02d_joystick_enable())
 		printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
 
+	printk("lis3_init_device: irq %d\n", dev->irq);
+
+	/* if we did not get an IRQ from ACPI - we have nothing more to do */
+	if (!dev->irq) {
+		printk(KERN_ERR DRIVER_NAME
+			": No IRQ in ACPI. Disabling /dev/freefall\n");
+		goto out;
+	}
+
+	printk("lis3: registering device\n");
+	if (misc_register(&lis3lv02d_misc_device))
+		printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+out:
 	lis3lv02d_decrease_use(dev);
 	return 0;
 }
@@ -351,6 +476,6 @@ int lis3lv02d_remove_fs(void)
 EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
 
 MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
-MODULE_AUTHOR("Yan Burman and Eric Piel");
+MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 223f1c0763b..75972bf372f 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -22,12 +22,15 @@
 /*
  * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
  * be connected via SPI. There exists also several similar chips (such as LIS302DL or
- * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * LIS3L02DQ) and they have slightly different registers, but we can provide a
+ * common interface for all of them.
  * They can also be connected via I²C.
  */
 
-#define LIS3LV02DL_ID	0x3A /* Also the LIS3LV02DQ */
-#define LIS302DL_ID	0x3B /* Also the LIS202DL! */
+/* 2-byte registers */
+#define LIS_DOUBLE_ID	0x3A /* LIS3LV02D[LQ] */
+/* 1-byte registers */
+#define LIS_SINGLE_ID	0x3B /* LIS[32]02DL and others */
 
 enum lis3lv02d_reg {
 	WHO_AM_I	= 0x0F,
@@ -44,10 +47,13 @@ enum lis3lv02d_reg {
 	STATUS_REG	= 0x27,
 	OUTX_L		= 0x28,
 	OUTX_H		= 0x29,
+	OUTX		= 0x29,
 	OUTY_L		= 0x2A,
 	OUTY_H		= 0x2B,
+	OUTY		= 0x2B,
 	OUTZ_L		= 0x2C,
 	OUTZ_H		= 0x2D,
+	OUTZ		= 0x2D,
 	FF_WU_CFG	= 0x30,
 	FF_WU_SRC	= 0x31,
 	FF_WU_ACK	= 0x32,
@@ -159,6 +165,10 @@ struct acpi_lis3lv02d {
 	acpi_status (*write) (acpi_handle handle, int reg, u8 val);
 	acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
 
+	u8			whoami;    /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
+	s16 (*read_data) (acpi_handle handle, int reg);
+	int			mdps_max_val;
+
 	struct input_dev	*idev;     /* input device */
 	struct task_struct	*kthread;  /* kthread for input */
 	struct mutex            lock;
@@ -170,6 +180,11 @@ struct acpi_lis3lv02d {
 	unsigned char		is_on;     /* whether the device is on or off */
 	unsigned char		usage;     /* usage counter */
 	struct axis_conversion	ac;        /* hw -> logical axis */
+
+	u32			irq;       /* IRQ number */
+	struct fasync_struct	*async_queue; /* queue for the misc device */
+	wait_queue_head_t	misc_wait; /* Wait queue for the misc device */
+	unsigned long		misc_opened; /* bit0: whether the device is open */
 };
 
 int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index b0ce3785228..73f77a9b8b1 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -1262,7 +1262,7 @@ static int __init vt1211_device_add(unsigned short address)
 	res.name = pdev->name;
 	err = acpi_check_resource_conflict(&res);
 	if (err)
-		goto EXIT;
+		goto EXIT_DEV_PUT;
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index cb808d01536..feae743ba99 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1548,7 +1548,7 @@ static int __init sensors_w83627ehf_init(void)
 
 	err = acpi_check_resource_conflict(&res);
 	if (err)
-		goto exit;
+		goto exit_device_put;
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index a34338567a2..f14813be4ef 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -328,7 +328,7 @@ static void dispatch_io(int rw, unsigned int num_regions,
 	struct dpages old_pages = *dp;
 
 	if (sync)
-		rw |= (1 << BIO_RW_SYNC);
+		rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
 
 	/*
 	 * For multiple regions we need to be careful to rewind
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 3073618269e..0a225da2127 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -344,7 +344,7 @@ static int run_io_job(struct kcopyd_job *job)
 {
 	int r;
 	struct dm_io_request io_req = {
-		.bi_rw = job->rw | (1 << BIO_RW_SYNC),
+		.bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG),
 		.mem.type = DM_IO_PAGE_LIST,
 		.mem.ptr.pl = job->pages,
 		.mem.offset = job->offset,
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4495104f6c9..03b4cd0a634 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -474,7 +474,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
 	 * causes ENOTSUPP, we allocate a spare bio...
 	 */
 	struct bio *bio = bio_alloc(GFP_NOIO, 1);
-	int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC);
+	int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
 
 	bio->bi_bdev = rdev->bdev;
 	bio->bi_sector = sector;
@@ -531,7 +531,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size,
 	struct completion event;
 	int ret;
 
-	rw |= (1 << BIO_RW_SYNC);
+	rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
 
 	bio->bi_bdev = bdev;
 	bio->bi_sector = sector;
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index de7adaf5fa5..78412c9c424 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -318,7 +318,6 @@ static int simple_std_setup(struct dvb_frontend *fe,
 			    u8 *config, u8 *cb)
 {
 	struct tuner_simple_priv *priv = fe->tuner_priv;
-	u8 tuneraddr;
 	int rc;
 
 	/* tv norm specific stuff for multi-norm tuners */
@@ -387,6 +386,7 @@ static int simple_std_setup(struct dvb_frontend *fe,
 
 	case TUNER_PHILIPS_TUV1236D:
 	{
+		struct tuner_i2c_props i2c = priv->i2c_props;
 		/* 0x40 -> ATSC antenna input 1 */
 		/* 0x48 -> ATSC antenna input 2 */
 		/* 0x00 -> NTSC antenna input 1 */
@@ -398,17 +398,15 @@ static int simple_std_setup(struct dvb_frontend *fe,
 			buffer[1] = 0x04;
 		}
 		/* set to the correct mode (analog or digital) */
-		tuneraddr = priv->i2c_props.addr;
-		priv->i2c_props.addr = 0x0a;
-		rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2);
+		i2c.addr = 0x0a;
+		rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
 		if (2 != rc)
 			tuner_warn("i2c i/o error: rc == %d "
 				   "(should be 2)\n", rc);
-		rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2);
+		rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
 		if (2 != rc)
 			tuner_warn("i2c i/o error: rc == %d "
 				   "(should be 2)\n", rc);
-		priv->i2c_props.addr = tuneraddr;
 		break;
 	}
 	}
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 0c733c66a44..069d847ba88 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -364,16 +364,15 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 				       enum dmx_success success)
 {
 	struct dmxdev_filter *dmxdevfilter = filter->priv;
-	unsigned long flags;
 	int ret;
 
 	if (dmxdevfilter->buffer.error) {
 		wake_up(&dmxdevfilter->buffer.queue);
 		return 0;
 	}
-	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+	spin_lock(&dmxdevfilter->dev->lock);
 	if (dmxdevfilter->state != DMXDEV_STATE_GO) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		return 0;
 	}
 	del_timer(&dmxdevfilter->timer);
@@ -392,7 +391,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 	}
 	if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
 		dmxdevfilter->state = DMXDEV_STATE_DONE;
-	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&dmxdevfilter->buffer.queue);
 	return 0;
 }
@@ -404,12 +403,11 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 {
 	struct dmxdev_filter *dmxdevfilter = feed->priv;
 	struct dvb_ringbuffer *buffer;
-	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+	spin_lock(&dmxdevfilter->dev->lock);
 	if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		return 0;
 	}
 
@@ -419,7 +417,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 	else
 		buffer = &dmxdevfilter->dev->dvr_buffer;
 	if (buffer->error) {
-		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+		spin_unlock(&dmxdevfilter->dev->lock);
 		wake_up(&buffer->queue);
 		return 0;
 	}
@@ -430,7 +428,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 		dvb_ringbuffer_flush(buffer);
 		buffer->error = ret;
 	}
-	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+	spin_unlock(&dmxdevfilter->dev->lock);
 	wake_up(&buffer->queue);
 	return 0;
 }
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index a2c1fd5d2f6..e2eca0b1fe7 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -399,9 +399,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 			      size_t count)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	while (count--) {
 		if (buf[0] == 0x47)
@@ -409,17 +407,16 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 		buf += 188;
 	}
 
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
 
 void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
-	unsigned long flags;
 	int p = 0, i, j;
 
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -452,18 +449,17 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter);
 
 void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
-	unsigned long flags;
 	int p = 0, i, j;
 	u8 tmppack[188];
 
-	spin_lock_irqsave(&demux->lock, flags);
+	spin_lock(&demux->lock);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -504,7 +500,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock_irqrestore(&demux->lock, flags);
+	spin_unlock(&demux->lock);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_204);
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 67cbce82cb9..4dfed6aa2db 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -98,11 +98,16 @@
  * 		- blacklisted KWorld radio in hid-core.c and hid-ids.h
  * 2008-12-03	Mark Lord <mlord@pobox.com>
  *		- add support for DealExtreme USB Radio
+ * 2009-01-31	Bob Ross <pigiron@gmx.com>
+ *		- correction of stereo detection/setting
+ *		- correction of signal strength indicator scaling
+ * 2009-01-31	Rick Bronson <rick@efn.org>
+ *		Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		- add LED status output
  *
  * ToDo:
  * - add firmware download/update support
  * - RDS support: interrupt mode, instead of polling
- * - add LED status output (check if that's not already done in firmware)
  */
 
 
@@ -882,6 +887,30 @@ static int si470x_rds_on(struct si470x_device *radio)
 
 
 /**************************************************************************
+ * General Driver Functions - LED_REPORT
+ **************************************************************************/
+
+/*
+ * si470x_set_led_state - sets the led state
+ */
+static int si470x_set_led_state(struct si470x_device *radio,
+		unsigned char led_state)
+{
+	unsigned char buf[LED_REPORT_SIZE];
+	int retval;
+
+	buf[0] = LED_REPORT;
+	buf[1] = LED_COMMAND;
+	buf[2] = led_state;
+
+	retval = si470x_set_report(radio, (void *) &buf, sizeof(buf));
+
+	return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
+/**************************************************************************
  * RDS Driver Functions
  **************************************************************************/
 
@@ -1385,20 +1414,22 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv,
 	};
 
 	/* stereo indicator == stereo (instead of mono) */
-	if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1)
-		tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
-	else
+	if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0)
 		tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+	else
+		tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 
 	/* mono/stereo selector */
-	if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1)
-		tuner->audmode = V4L2_TUNER_MODE_MONO;
-	else
+	if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
 		tuner->audmode = V4L2_TUNER_MODE_STEREO;
+	else
+		tuner->audmode = V4L2_TUNER_MODE_MONO;
 
 	/* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
-	tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI)
-				* 0x0101;
+	/* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
+	tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
+	/* the ideal factor is 0xffff/75 = 873,8 */
+	tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
 
 	/* automatic frequency control: -1: freq to low, 1 freq to high */
 	/* AFCRL does only indicate that freq. differs, not if too low/high */
@@ -1632,6 +1663,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	/* set initial frequency */
 	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
 
+	/* set led to connect state */
+	si470x_set_led_state(radio, BLINK_GREEN_LED);
+
 	/* rds buffer allocation */
 	radio->buf_size = rds_buf * 3;
 	radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
@@ -1715,6 +1749,9 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf)
 	cancel_delayed_work_sync(&radio->work);
 	usb_set_intfdata(intf, NULL);
 	if (radio->users == 0) {
+		/* set led to disconnect state */
+		si470x_set_led_state(radio, BLINK_ORANGE_LED);
+
 		video_unregister_device(radio->videodev);
 		kfree(radio->buffer);
 		kfree(radio);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 2ed24527ecd..65e4901f4db 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -422,6 +422,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
 		if (urb == NULL)
 			break;
 
+		BUG_ON(!gspca_dev->dev);
 		gspca_dev->urb[i] = NULL;
 		if (!gspca_dev->present)
 			usb_kill_urb(urb);
@@ -1950,8 +1951,12 @@ void gspca_disconnect(struct usb_interface *intf)
 {
 	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
 
+	mutex_lock(&gspca_dev->usb_lock);
 	gspca_dev->present = 0;
+	mutex_unlock(&gspca_dev->usb_lock);
 
+	destroy_urbs(gspca_dev);
+	gspca_dev->dev = NULL;
 	usb_set_intfdata(intf, NULL);
 
 	/* release the device */
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index f6b3ef6e691..c13bd2aa0be 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -393,7 +393,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo
 		return 0;
 	}
 
-	v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+	v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt);
 	vbifmt->service_set = ivtv_get_service_set(vbifmt);
 	return 0;
 }
@@ -1748,6 +1748,18 @@ static long ivtv_default(struct file *file, void *fh, int cmd, void *arg)
 		break;
 	}
 
+	case IVTV_IOC_DMA_FRAME:
+	case VIDEO_GET_PTS:
+	case VIDEO_GET_FRAME_COUNT:
+	case VIDEO_GET_EVENT:
+	case VIDEO_PLAY:
+	case VIDEO_STOP:
+	case VIDEO_FREEZE:
+	case VIDEO_CONTINUE:
+	case VIDEO_COMMAND:
+	case VIDEO_TRY_COMMAND:
+		return ivtv_decoder_ioctls(file, cmd, (void *)arg);
+
 	default:
 		return -EINVAL;
 	}
@@ -1790,18 +1802,6 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp,
 		ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
 		return 0;
 
-	case IVTV_IOC_DMA_FRAME:
-	case VIDEO_GET_PTS:
-	case VIDEO_GET_FRAME_COUNT:
-	case VIDEO_GET_EVENT:
-	case VIDEO_PLAY:
-	case VIDEO_STOP:
-	case VIDEO_FREEZE:
-	case VIDEO_CONTINUE:
-	case VIDEO_COMMAND:
-	case VIDEO_TRY_COMMAND:
-		return ivtv_decoder_ioctls(filp, cmd, (void *)arg);
-
 	default:
 		break;
 	}
diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index 1a4d04664d6..aa266e1f69b 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -286,7 +286,7 @@ static int __init egpio_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		goto fail;
-	ei->base_addr = ioremap_nocache(res->start, res->end - res->start);
+	ei->base_addr = ioremap_nocache(res->start, resource_size(res));
 	if (!ei->base_addr)
 		goto fail;
 	pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr);
@@ -307,7 +307,7 @@ static int __init egpio_probe(struct platform_device *pdev)
 
 	ei->nchips = pdata->num_chips;
 	ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL);
-	if (!ei) {
+	if (!ei->chip) {
 		ret = -ENOMEM;
 		goto fail;
 	}
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index ea9488e7ad6..2e36057659e 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -678,6 +678,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 
 static struct i2c_device_id pcf50633_id_table[] = {
 	{"pcf50633", 0x73},
+	{/* end of list */}
 };
 
 static struct i2c_driver pcf50633_driver = {
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 0e5761f1263..4c7b7962f6b 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1050,7 +1050,7 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
 	return gpiochip_add(gchip);
 }
 
-static int sm501_register_gpio(struct sm501_devdata *sm)
+static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
 {
 	struct sm501_gpio *gpio = &sm->gpio;
 	resource_size_t iobase = sm->io_res->start + SM501_GPIO;
@@ -1321,7 +1321,7 @@ static unsigned int sm501_mem_local[] = {
  * Common init code for an SM501
 */
 
-static int sm501_init_dev(struct sm501_devdata *sm)
+static int __devinit sm501_init_dev(struct sm501_devdata *sm)
 {
 	struct sm501_initdata *idata;
 	struct sm501_platdata *pdata;
@@ -1397,7 +1397,7 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 	return 0;
 }
 
-static int sm501_plat_probe(struct platform_device *dev)
+static int __devinit sm501_plat_probe(struct platform_device *dev)
 {
 	struct sm501_devdata *sm;
 	int ret;
@@ -1586,8 +1586,8 @@ static struct sm501_platdata sm501_pci_platdata = {
 	.gpio_base	= -1,
 };
 
-static int sm501_pci_probe(struct pci_dev *dev,
-			   const struct pci_device_id *id)
+static int __devinit sm501_pci_probe(struct pci_dev *dev,
+				     const struct pci_device_id *id)
 {
 	struct sm501_devdata *sm;
 	int err;
@@ -1693,7 +1693,7 @@ static void sm501_dev_remove(struct sm501_devdata *sm)
 	sm501_gpio_remove(sm);
 }
 
-static void sm501_pci_remove(struct pci_dev *dev)
+static void __devexit sm501_pci_remove(struct pci_dev *dev)
 {
 	struct sm501_devdata *sm = pci_get_drvdata(dev);
 
@@ -1727,16 +1727,16 @@ static struct pci_device_id sm501_pci_tbl[] = {
 
 MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
 
-static struct pci_driver sm501_pci_drv = {
+static struct pci_driver sm501_pci_driver = {
 	.name		= "sm501",
 	.id_table	= sm501_pci_tbl,
 	.probe		= sm501_pci_probe,
-	.remove		= sm501_pci_remove,
+	.remove		= __devexit_p(sm501_pci_remove),
 };
 
 MODULE_ALIAS("platform:sm501");
 
-static struct platform_driver sm501_plat_drv = {
+static struct platform_driver sm501_plat_driver = {
 	.driver		= {
 		.name	= "sm501",
 		.owner	= THIS_MODULE,
@@ -1749,14 +1749,14 @@ static struct platform_driver sm501_plat_drv = {
 
 static int __init sm501_base_init(void)
 {
-	platform_driver_register(&sm501_plat_drv);
-	return pci_register_driver(&sm501_pci_drv);
+	platform_driver_register(&sm501_plat_driver);
+	return pci_register_driver(&sm501_pci_driver);
 }
 
 static void __exit sm501_base_exit(void)
 {
-	platform_driver_unregister(&sm501_plat_drv);
-	pci_unregister_driver(&sm501_pci_drv);
+	platform_driver_unregister(&sm501_plat_driver);
+	pci_unregister_driver(&sm501_pci_driver);
 }
 
 module_init(sm501_base_init);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e7ab0035d30..68826f1e36b 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -38,7 +38,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #include <mach/cpu.h>
 #endif
 
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index f92595c8f16..84d5ea1ec17 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1111,7 +1111,7 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
 	do {
 		schedule_timeout_interruptible(1);
 		reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
-	} while (tries-- && (reg & WM8350_AUXADC_POLL));
+	} while (--tries && (reg & WM8350_AUXADC_POLL));
 
 	if (!tries)
 		dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
@@ -1297,14 +1297,29 @@ static void wm8350_client_dev_register(struct wm8350 *wm8350,
 int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		       struct wm8350_platform_data *pdata)
 {
-	int ret = -EINVAL;
+	int ret;
 	u16 id1, id2, mask_rev;
 	u16 cust_id, mode, chip_rev;
 
 	/* get WM8350 revision and config mode */
-	wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
-	wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
-	wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
+	ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
+	if (ret != 0) {
+		dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+		goto err;
+	}
+
+	ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+	if (ret != 0) {
+		dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+		goto err;
+	}
+
+	ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
+			       &mask_rev);
+	if (ret != 0) {
+		dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
+		goto err;
+	}
 
 	id1 = be16_to_cpu(id1);
 	id2 = be16_to_cpu(id2);
@@ -1404,14 +1419,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		return ret;
 	}
 
-	if (pdata && pdata->init) {
-		ret = pdata->init(wm8350);
-		if (ret != 0) {
-			dev_err(wm8350->dev, "Platform init() failed: %d\n",
-				ret);
-			goto err;
-		}
-	}
+	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
 
 	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
@@ -1430,6 +1443,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 	}
 	wm8350->chip_irq = irq;
 
+	if (pdata && pdata->init) {
+		ret = pdata->init(wm8350);
+		if (ret != 0) {
+			dev_err(wm8350->dev, "Platform init() failed: %d\n",
+				ret);
+			goto err;
+		}
+	}
+
 	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
 
 	wm8350_client_dev_register(wm8350, "wm8350-codec",
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 68887b817d1..9a4cc954cb7 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -3188,7 +3188,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
 	{ 0x7CFF, 0x0C00, 0x7FFF }, /* R1   - ID */
 	{ 0x0000, 0x0000, 0x0000 }, /* R2 */
 	{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3   - System Control 1 */
-	{ 0xFCF7, 0xFCF7, 0xF800 }, /* R4   - System Control 2 */
+	{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4   - System Control 2 */
 	{ 0x80FF, 0x80FF, 0x8000 }, /* R5   - System Hibernate */
 	{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6   - Interface Control */
 	{ 0x0000, 0x0000, 0x0000 }, /* R7 */
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 45b1f430685..513eb09a638 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -584,7 +584,7 @@ static int mmc_blk_probe(struct mmc_card *card)
 	if (err)
 		goto out;
 
-	string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2,
+	string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
 			cap_str, sizeof(cap_str));
 	printk(KERN_INFO "%s: %s %s %s %s\n",
 		md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b92b172074e..b9f1e84897c 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -494,7 +494,7 @@ static int mmc_test_basic_read(struct mmc_test_card *test)
 
 	sg_init_one(&sg, test->buffer, 512);
 
-	ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
+	ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0);
 	if (ret)
 		return ret;
 
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 76bfe16c09b..2b1196e6142 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave)
 {
 	struct dw_dma_slave *dws = slave;
 
-	if (dws->dma_dev == chan->device->dev)
+	if (dws->dma_dev == chan->device->dev) {
+		chan->private = dws;
 		return true;
-	else
+	} else
 		return false;
 }
 #endif
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index db37490f67e..a631c81dce1 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -55,6 +55,7 @@
 #define VS30			(1 << 25)
 #define SDVS18			(0x5 << 9)
 #define SDVS30			(0x6 << 9)
+#define SDVS33			(0x7 << 9)
 #define SDVSCLR			0xFFFFF1FF
 #define SDVSDET			0x00000400
 #define AUTOIDLE		0x1
@@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
 }
 #endif  /* CONFIG_MMC_DEBUG */
 
+/*
+ * MMC controller internal state machines reset
+ *
+ * Used to reset command or data internal state machines, using respectively
+ *  SRC or SRD bit of SYSCTL register
+ * Can be called from interrupt context
+ */
+static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host,
+		unsigned long bit)
+{
+	unsigned long i = 0;
+	unsigned long limit = (loops_per_jiffy *
+				msecs_to_jiffies(MMC_TIMEOUT_MS));
+
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+			 OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+
+	while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
+		(i++ < limit))
+		cpu_relax();
+
+	if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
+		dev_err(mmc_dev(host->mmc),
+			"Timeout waiting on controller reset in %s\n",
+			__func__);
+}
 
 /*
  * MMC controller IRQ handler
@@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 			(status & CMD_CRC)) {
 			if (host->cmd) {
 				if (status & CMD_TIMEOUT) {
-					OMAP_HSMMC_WRITE(host->base, SYSCTL,
-						OMAP_HSMMC_READ(host->base,
-								SYSCTL) | SRC);
-					while (OMAP_HSMMC_READ(host->base,
-							SYSCTL) & SRC)
-						;
-
+					mmc_omap_reset_controller_fsm(host, SRC);
 					host->cmd->error = -ETIMEDOUT;
 				} else {
 					host->cmd->error = -EILSEQ;
 				}
 				end_cmd = 1;
 			}
-			if (host->data)
+			if (host->data) {
 				mmc_dma_cleanup(host);
+				mmc_omap_reset_controller_fsm(host, SRD);
+			}
 		}
 		if ((status & DATA_TIMEOUT) ||
 			(status & DATA_CRC)) {
@@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 					mmc_dma_cleanup(host);
 				else
 					host->data->error = -EILSEQ;
-				OMAP_HSMMC_WRITE(host->base, SYSCTL,
-					OMAP_HSMMC_READ(host->base,
-							SYSCTL) | SRD);
-				while (OMAP_HSMMC_READ(host->base,
-						SYSCTL) & SRD)
-					;
+				mmc_omap_reset_controller_fsm(host, SRD);
 				end_trans = 1;
 			}
 		}
@@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 }
 
 /*
- * Switch MMC operating voltage
+ * Switch MMC interface voltage ... only relevant for MMC1.
+ *
+ * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
+ * The MMC2 transceiver controls are used instead of DAT4..DAT7.
+ * Some chips, like eMMC ones, use internal transceivers.
  */
 static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
 {
 	u32 reg_val = 0;
 	int ret;
 
+	if (host->id != OMAP_MMC1_DEVID)
+		return 0;
+
 	/* Disable the clocks */
 	clk_disable(host->fclk);
 	clk_disable(host->iclk);
@@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
 	OMAP_HSMMC_WRITE(host->base, HCTL,
 		OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
 	reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+
 	/*
 	 * If a MMC dual voltage card is detected, the set_ios fn calls
 	 * this fn with VDD bit set for 1.8V. Upon card removal from the
 	 * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
 	 *
-	 * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
-	 * set in HCTL.
+	 * Cope with a bit of slop in the range ... per data sheets:
+	 *  - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
+	 *    but recommended values are 1.71V to 1.89V
+	 *  - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
+	 *    but recommended values are 2.7V to 3.3V
+	 *
+	 * Board setup code shouldn't permit anything very out-of-range.
+	 * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
+	 * middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
 	 */
-	if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
-				((1 << vdd) == MMC_VDD_33_34)))
-		reg_val |= SDVS30;
-	if ((1 << vdd) == MMC_VDD_165_195)
+	if ((1 << vdd) <= MMC_VDD_23_24)
 		reg_val |= SDVS18;
+	else
+		reg_val |= SDVS30;
 
 	OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
 
@@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work)
 {
 	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
 						mmc_carddetect_work);
+	struct omap_mmc_slot_data *slot = &mmc_slot(host);
+
+	host->carddetect = slot->card_detect(slot->card_detect_irq);
 
 	sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
 	if (host->carddetect) {
 		mmc_detect_change(host->mmc, (HZ * 200) / 1000);
 	} else {
-		OMAP_HSMMC_WRITE(host->base, SYSCTL,
-			OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
-		while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
-			;
-
+		mmc_omap_reset_controller_fsm(host, SRD);
 		mmc_detect_change(host->mmc, (HZ * 50) / 1000);
 	}
 }
@@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
 {
 	struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
 
-	host->carddetect = mmc_slot(host).card_detect(irq);
 	schedule_work(&host->mmc_carddetect_work);
 
 	return IRQ_HANDLED;
@@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 		mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
 		/*
-		 * Reset bus voltage to 3V if it got set to 1.8V earlier.
+		 * Reset interface voltage to 3V if it's 1.8V now;
+		 * only relevant on MMC-1, the others always use 1.8V.
+		 *
 		 * REVISIT: If we are able to detect cards after unplugging
 		 * a 1.8V card, this code should not be needed.
 		 */
+		if (host->id != OMAP_MMC1_DEVID)
+			break;
 		if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
 			int vdd = fls(host->mmc->ocr_avail) - 1;
 			if (omap_mmc_switch_opcond(host, vdd) != 0)
@@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	if (host->id == OMAP_MMC1_DEVID) {
-		/* Only MMC1 can operate at 3V/1.8V */
+		/* Only MMC1 can interface at 3V without some flavor
+		 * of external transceiver; but they all handle 1.8V.
+		 */
 		if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
 			(ios->vdd == DUAL_VOLT_OCR_BIT)) {
 				/*
@@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
 						" level suspend\n");
 			}
 
-			if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+			if (host->id == OMAP_MMC1_DEVID
+					&& !(OMAP_HSMMC_READ(host->base, HCTL)
+							& SDVSDET)) {
 				OMAP_HSMMC_WRITE(host->base, HCTL,
 					OMAP_HSMMC_READ(host->base, HCTL)
 					& SDVSCLR);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 35a98eec741..f4a67c65d30 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host)
 
 	to_ptr = host->base + host->sdidata;
 
-	while ((fifo = fifo_free(host))) {
+	while ((fifo = fifo_free(host)) > 3) {
 		if (!host->pio_bytes) {
 			res = get_data_buffer(host, &host->pio_bytes,
 							&host->pio_ptr);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index f07255cb17e..8cff5f5e7f8 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -144,8 +144,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
 			  SDHCI_QUIRK_32BIT_DMA_SIZE |
 			  SDHCI_QUIRK_32BIT_ADMA_SIZE |
 			  SDHCI_QUIRK_RESET_AFTER_REQUEST |
-			  SDHCI_QUIRK_BROKEN_SMALL_PIO |
-			  SDHCI_QUIRK_FORCE_HIGHSPEED;
+			  SDHCI_QUIRK_BROKEN_SMALL_PIO;
 	}
 
 	/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b2d1f99af6..f52f3053ed9 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1636,8 +1636,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	mmc->f_max = host->max_clk;
 	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 
-	if ((caps & SDHCI_CAN_DO_HISPD) ||
-		(host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
+	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
 
 	mmc->ocr_avail = 0;
@@ -1723,7 +1722,9 @@ int sdhci_add_host(struct sdhci_host *host)
 #endif
 
 #ifdef SDHCI_USE_LEDS_CLASS
-	host->led.name = mmc_hostname(mmc);
+	snprintf(host->led_name, sizeof(host->led_name),
+		"%s::", mmc_hostname(mmc));
+	host->led.name = host->led_name;
 	host->led.brightness = LED_OFF;
 	host->led.default_trigger = mmc_hostname(mmc);
 	host->led.brightness_set = sdhci_led_control;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3efba236394..ebb83657e27 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -208,8 +208,6 @@ struct sdhci_host {
 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
 /* Controller has an issue with buffer bits for small transfers */
 #define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
-/* Controller supports high speed but doesn't have the caps bit set */
-#define SDHCI_QUIRK_FORCE_HIGHSPEED			(1<<14)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
@@ -222,6 +220,7 @@ struct sdhci_host {
 
 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 	struct led_classdev	led;		/* LED control */
+	char   led_name[32];
 #endif
 
 	spinlock_t		lock;		/* Mutex */
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c98c1570a40..47a33cec379 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -139,7 +139,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
 	struct nand_chip *nand_chip = mtd->priv;
 	struct atmel_nand_host *host = nand_chip->priv;
 
-	return gpio_get_value(host->board->rdy_pin);
+	return gpio_get_value(host->board->rdy_pin) ^
+                !!host->board->rdy_pin_active_low;
 }
 
 /*
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index f4b7c79023f..f3f686581a9 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -61,6 +61,8 @@
 /* global iommu list, set NULL for ignored DMAR units */
 static struct intel_iommu **g_iommus;
 
+static int rwbf_quirk;
+
 /*
  * 0: Present
  * 1-11: Reserved
@@ -785,7 +787,7 @@ static void iommu_flush_write_buffer(struct intel_iommu *iommu)
 	u32 val;
 	unsigned long flag;
 
-	if (!cap_rwbf(iommu->cap))
+	if (!rwbf_quirk && !cap_rwbf(iommu->cap))
 		return;
 	val = iommu->gcmd | DMA_GCMD_WBF;
 
@@ -3137,3 +3139,15 @@ static struct iommu_ops intel_iommu_ops = {
 	.unmap		= intel_iommu_unmap_range,
 	.iova_to_phys	= intel_iommu_iova_to_phys,
 };
+
+static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
+{
+	/*
+	 * Mobile 4 Series Chipset neglects to set RWBF capability,
+	 * but needs it:
+	 */
+	printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
+	rwbf_quirk = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 44f15ff70c1..baba2eb5367 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -103,14 +103,12 @@ static void msix_set_enable(struct pci_dev *dev, int enable)
 	}
 }
 
-/*
- * Essentially, this is ((1 << (1 << x)) - 1), but without the
- * undefinedness of a << 32.
- */
 static inline __attribute_const__ u32 msi_mask(unsigned x)
 {
-	static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
-	return mask[x];
+	/* Don't shift by >= width of type */
+	if (x >= 5)
+		return 0xffffffff;
+	return (1 << (1 << x)) - 1;
 }
 
 static void msix_flush_writes(struct irq_desc *desc)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e3efe6b19ee..6d6120007af 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1540,16 +1540,21 @@ void pci_release_region(struct pci_dev *pdev, int bar)
 }
 
 /**
- *	pci_request_region - Reserved PCI I/O and memory resource
+ *	__pci_request_region - Reserved PCI I/O and memory resource
  *	@pdev: PCI device whose resources are to be reserved
  *	@bar: BAR to be reserved
  *	@res_name: Name to be associated with resource.
+ *	@exclusive: whether the region access is exclusive or not
  *
  *	Mark the PCI region associated with PCI device @pdev BR @bar as
  *	being reserved by owner @res_name.  Do not access any
  *	address inside the PCI regions unless this call returns
  *	successfully.
  *
+ *	If @exclusive is set, then the region is marked so that userspace
+ *	is explicitly not allowed to map the resource via /dev/mem or
+ * 	sysfs MMIO access.
+ *
  *	Returns 0 on success, or %EBUSY on error.  A warning
  *	message is also printed on failure.
  */
@@ -1588,12 +1593,12 @@ err_out:
 }
 
 /**
- *	pci_request_region - Reserved PCI I/O and memory resource
+ *	pci_request_region - Reserve PCI I/O and memory resource
  *	@pdev: PCI device whose resources are to be reserved
  *	@bar: BAR to be reserved
- *	@res_name: Name to be associated with resource.
+ *	@res_name: Name to be associated with resource
  *
- *	Mark the PCI region associated with PCI device @pdev BR @bar as
+ *	Mark the PCI region associated with PCI device @pdev BAR @bar as
  *	being reserved by owner @res_name.  Do not access any
  *	address inside the PCI regions unless this call returns
  *	successfully.
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 26ddf78ac30..07c0aa5275e 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -16,21 +16,21 @@ extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
 #endif
 
 /**
- * Firmware PM callbacks
+ * struct pci_platform_pm_ops - Firmware PM callbacks
  *
- * @is_manageable - returns 'true' if given device is power manageable by the
- *                  platform firmware
+ * @is_manageable: returns 'true' if given device is power manageable by the
+ *                 platform firmware
  *
- * @set_state - invokes the platform firmware to set the device's power state
+ * @set_state: invokes the platform firmware to set the device's power state
  *
- * @choose_state - returns PCI power state of given device preferred by the
- *                 platform; to be used during system-wide transitions from a
- *                 sleeping state to the working state and vice versa
+ * @choose_state: returns PCI power state of given device preferred by the
+ *                platform; to be used during system-wide transitions from a
+ *                sleeping state to the working state and vice versa
  *
- * @can_wakeup - returns 'true' if given device is capable of waking up the
- *               system from a sleeping state
+ * @can_wakeup: returns 'true' if given device is capable of waking up the
+ *              system from a sleeping state
  *
- * @sleep_wake - enables/disables the system wake up capability of given device
+ * @sleep_wake: enables/disables the system wake up capability of given device
  *
  * If given platform is generally capable of power managing PCI devices, all of
  * these callbacks are mandatory.
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 29cbe47f219..36864a935d6 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -55,6 +55,7 @@ void pci_disable_rom(struct pci_dev *pdev)
 
 /**
  * pci_get_rom_size - obtain the actual size of the ROM image
+ * @pdev: target PCI device
  * @rom: kernel virtual pointer to image of ROM
  * @size: size of PCI window
  *  return: size of actual ROM image
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 94363115a42..b3866ad5022 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -62,6 +62,7 @@ config DELL_LAPTOP
 	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
+	depends on POWER_SUPPLY
 	default n
 	---help---
 	This driver adds support for rfkill and backlight control to Dell
@@ -301,6 +302,7 @@ config INTEL_MENLOW
 config EEEPC_LAPTOP
 	tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
 	depends on ACPI
+	depends on INPUT
 	depends on EXPERIMENTAL
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 1fd8f2193ed..4377e93a43d 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -280,8 +280,11 @@ sclp_dispatch_evbufs(struct sccb_header *sccb)
 	rc = 0;
 	for (offset = sizeof(struct sccb_header); offset < sccb->length;
 	     offset += evbuf->length) {
-		/* Search for event handler */
 		evbuf = (struct evbuf_header *) ((addr_t) sccb + offset);
+		/* Check for malformed hardware response */
+		if (evbuf->length == 0)
+			break;
+		/* Search for event handler */
 		reg = NULL;
 		list_for_each(l, &sclp_reg_list) {
 			reg = list_entry(l, struct sclp_register, list);
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 50639049641..77ab6e34a10 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -19,6 +19,7 @@
 #include <linux/memory.h>
 #include <asm/chpid.h>
 #include <asm/sclp.h>
+#include <asm/setup.h>
 
 #include "sclp.h"
 
@@ -474,6 +475,10 @@ static void __init add_memory_merged(u16 rn)
 		goto skip_add;
 	if (start + size > VMEM_MAX_PHYS)
 		size = VMEM_MAX_PHYS - start;
+	if (memory_end_set && (start >= memory_end))
+		goto skip_add;
+	if (memory_end_set && (start + size > memory_end))
+		size = memory_end - start;
 	add_memory(0, start, size);
 skip_add:
 	first_rn = rn;
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 89362d733d6..8f58f7ff0dd 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -877,6 +877,10 @@ static int atmel_startup(struct uart_port *port)
 		}
 	}
 
+	/* Save current CSR for comparison in atmel_tasklet_func() */
+	atmel_port->irq_status_prev = UART_GET_CSR(port);
+	atmel_port->irq_status = atmel_port->irq_status_prev;
+
 	/*
 	 * Finally, enable the serial port
 	 */
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 92187e28608..ac79cbe4c2c 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	brd->pci_dev = pdev;
 	if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
 		brd->maxports = 4;
+	else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8)
+		brd->maxports = 8;
 	else
 		brd->maxports = 2;
 
@@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c
index 49698cabc30..f5ed9721aab 100644
--- a/drivers/spi/spi_gpio.c
+++ b/drivers/spi/spi_gpio.c
@@ -114,7 +114,7 @@ static inline void setmosi(const struct spi_device *spi, int is_on)
 
 static inline int getmiso(const struct spi_device *spi)
 {
-	return gpio_get_value(SPI_MISO_GPIO);
+	return !!gpio_get_value(SPI_MISO_GPIO);
 }
 
 #undef pdata
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index c54fc40458b..a4301dc02d2 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -298,19 +298,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
- * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
- * @dev: USB Host Controller being resumed
- *
- * Store this function in the HCD's struct pci_driver as .resume_early.
- */
-int usb_hcd_pci_resume_early(struct pci_dev *dev)
-{
-	pci_restore_state(dev);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
-
-/**
  * usb_hcd_pci_resume - power management resume of a PCI-based HCD
  * @dev: USB Host Controller being resumed
  *
@@ -333,6 +320,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
 	}
 #endif
 
+	pci_restore_state(dev);
+
 	hcd = pci_get_drvdata(dev);
 	if (hcd->state != HC_STATE_SUSPENDED) {
 		dev_dbg(hcd->self.controller,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 5b94a56bec2..f750eb1ab59 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev);
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
 
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 9b36205c575..0ce4e281984 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -904,8 +904,8 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
 
 	/* most IN status is the same, but ISO can't stall */
 	*ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
-		| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
-			? 0 : UDCCS_BI_SST;
+		| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+			? 0 : UDCCS_BI_SST);
 }
 
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bb21fb0a496..abb9a7706ec 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
 	.shutdown = 	usb_hcd_pci_shutdown,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 5d625c3fd42..f9961b4c0da 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
 
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 944f7e0ca4d..cf5e4cf7ea4 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = {
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif	/* PM */
 };
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 2291c5f5af5..958751ccea4 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -227,13 +227,13 @@ void scan_async_work(struct work_struct *work)
 	 * Now that the ASL is updated, complete the removal of any
 	 * removed qsets.
 	 */
-	spin_lock(&whc->lock);
+	spin_lock_irq(&whc->lock);
 
 	list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
 		qset_remove_complete(whc, qset);
 	}
 
-	spin_unlock(&whc->lock);
+	spin_unlock_irq(&whc->lock);
 }
 
 /**
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index 7dc85a0bee7..df8b85f0709 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -255,13 +255,13 @@ void scan_periodic_work(struct work_struct *work)
 	 * Now that the PZL is updated, complete the removal of any
 	 * removed qsets.
 	 */
-	spin_lock(&whc->lock);
+	spin_lock_irq(&whc->lock);
 
 	list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
 		qset_remove_complete(whc, qset);
 	}
 
-	spin_unlock(&whc->lock);
+	spin_unlock_irq(&whc->lock);
 }
 
 /**
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index bf0af660df8..fb19803060c 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1054,10 +1054,7 @@ config FB_RIVA_BACKLIGHT
 
 config FB_I810
 	tristate "Intel 810/815 support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI && X86_32
-	select AGP
-	select AGP_INTEL
-	select FB
+	depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1120,10 +1117,7 @@ config FB_CARILLO_RANCH
 
 config FB_INTEL
 	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI && X86
-	select FB
-	select AGP
-	select AGP_INTEL
+	depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 09a3d5522b4..325c10ff6a2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -406,7 +406,7 @@ config ITCO_WDT
 	---help---
 	  Hardware driver for the intel TCO timer based watchdog devices.
 	  These drivers are included in the Intel 82801 I/O Controller
-	  Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 	  controller hub.
 
 	  The TCO (Total Cost of Ownership) timer is a watchdog timer
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 5531691f46e..e35d5458923 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file)
 static int at91_wdt_settimeout(int new_time)
 {
 	/*
-	 * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
 	 *
 	 * Since WDV is a 16-bit counter, the maximum period is
-	 * 65536 / 0.256 = 256 seconds.
+	 * 65536 / 256 = 256 seconds.
 	 */
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b1da287f90e..a56ac84381b 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index 2474ebca88f..d8264ad0be4 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -1,7 +1,7 @@
 /*
  *	intel TCO vendor specific watchdog driver support
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_vendor_support"
-#define DRV_VERSION	"1.02"
+#define DRV_VERSION	"1.03"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n
  *	    20.6 seconds.
  */
 
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+	val32 = inl(SMI_EN);
+	val32 |= 0x00002000;	/* Turn on SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to deactivate watchdog */
+}
+
 static void supermicro_old_pre_keepalive(unsigned long acpibase)
 {
 	/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
@@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 void iTCO_vendor_pre_start(unsigned long acpibase,
 			   unsigned int heartbeat)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_start(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_start(heartbeat);
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_stop(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_stop();
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 5b395a4ddfd..352334947ea 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
 /*
- *	intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ *	intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -63,7 +63,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
-#define DRV_VERSION	"1.04"
+#define DRV_VERSION	"1.05"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
 /* TCO base address */
-#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
 /* SMI Control and Enable Register */
-#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
+#define SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
 
 #define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Curr. Value */
 #define TCOv1_TMR	TCOBASE + 0x01	/* TCOv1 Timer Initial Value	*/
-#define	TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
-#define	TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
-#define	TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
+#define TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
+#define TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
+#define TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
+#define TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
 #define TCO1_CNT	TCOBASE + 0x08	/* TCO1 Control Register	*/
 #define TCO2_CNT	TCOBASE + 0x0a	/* TCO2 Control Register	*/
 #define TCOv2_TMR	TCOBASE + 0x12	/* TCOv2 Timer Initial Value	*/
@@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
 static int iTCO_wdt_start(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -351,11 +350,6 @@ static int iTCO_wdt_start(void)
 		return -EIO;
 	}
 
-	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
-	val32 = inl(SMI_EN);
-	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
-	outl(val32, SMI_EN);
-
 	/* Force the timer to its reload value by writing to the TCO_RLD
 	   register */
 	if (iTCO_wdt_private.iTCO_version == 2)
@@ -378,7 +372,6 @@ static int iTCO_wdt_start(void)
 static int iTCO_wdt_stop(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void)
 	outw(val, TCO1_CNT);
 	val = inw(TCO1_CNT);
 
-	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
-	val32 = inl(SMI_EN);
-	val32 |= 0x00002000;
-	outl(val32, SMI_EN);
-
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 	iTCO_wdt_set_NO_REBOOT_bit();
 
@@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	int ret;
 	u32 base_address;
 	unsigned long RCBA;
+	unsigned long val32;
 
 	/*
 	 *      Find the ACPI/PM base I/O address which is the base
@@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 		ret = -EIO;
 		goto out;
 	}
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);
 
 	/* The TCO I/O registers reside in a 32-byte range pointed to
 	   by the TCOBASE value */