aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorGrant Grundler <grundler@parisc-linux.org>2006-09-08 11:15:40 -0700
committerJeff Garzik <jeff@garzik.org>2006-09-11 09:05:37 -0400
commit42eab56776b7c9686ee39f8f677a3e3b09caa170 (patch)
tree79a4612538438a1c91d5aa1883a8115296a91540 /drivers
parent7f2b12482c86d69ed1804d239a52ea846ef294f2 (diff)
[PATCH] Use tulip.h in winbond-840.c
Include "tulip.h" in winbond-840.c and clean up lots of redundant definitions. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/tulip/winbond-840.c68
1 files changed, 24 insertions, 44 deletions
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 6b82d149822..b54378fac8f 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -90,10 +90,8 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
Making the Tx ring too large decreases the effectiveness of channel
bonding and packet priority.
There are no ill effects from too-large receive rings. */
-#define TX_RING_SIZE 16
#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
#define TX_QUEUE_LEN_RESTART 5
-#define RX_RING_SIZE 32
#define TX_BUFLIMIT (1024-128)
@@ -137,6 +135,8 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
#include <asm/io.h>
#include <asm/irq.h>
+#include "tulip.h"
+
/* These identify the driver base version and may not be removed. */
static char version[] =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
@@ -242,8 +242,8 @@ static const struct pci_id_info pci_id_tbl[] __devinitdata = {
};
/* This driver was written to use PCI memory space, however some x86 systems
- work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space
- accesses instead of memory space. */
+ work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config
+*/
/* Offsets to the Command and Status Registers, "CSRs".
While similar to the Tulip, these registers are longword aligned.
@@ -261,21 +261,11 @@ enum w840_offsets {
CurTxDescAddr=0x4C, CurTxBufAddr=0x50,
};
-/* Bits in the interrupt status/enable registers. */
-/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */
-enum intr_status_bits {
- NormalIntr=0x10000, AbnormalIntr=0x8000,
- IntrPCIErr=0x2000, TimerInt=0x800,
- IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40,
- TxFIFOUnderflow=0x20, RxErrIntr=0x10,
- TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01,
-};
-
/* Bits in the NetworkConfig register. */
enum rx_mode_bits {
- AcceptErr=0x80, AcceptRunt=0x40,
- AcceptBroadcast=0x20, AcceptMulticast=0x10,
- AcceptAllPhys=0x08, AcceptMyPhys=0x02,
+ AcceptErr=0x80,
+ RxAcceptBroadcast=0x20, AcceptMulticast=0x10,
+ RxAcceptAllPhys=0x08, AcceptMyPhys=0x02,
};
enum mii_reg_bits {
@@ -297,13 +287,6 @@ struct w840_tx_desc {
u32 buffer1, buffer2;
};
-/* Bits in network_desc.status */
-enum desc_status_bits {
- DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000,
- DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000,
- DescIntr=0x80000000,
-};
-
#define MII_CNT 1 /* winbond only supports one MII */
struct netdev_private {
struct w840_rx_desc *rx_ring;
@@ -371,7 +354,6 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
int irq;
int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
void __iomem *ioaddr;
- int bar = 1;
i = pci_enable_device(pdev);
if (i) return i;
@@ -393,10 +375,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
if (pci_request_regions(pdev, DRV_NAME))
goto err_out_netdev;
-#ifdef USE_IO_OPS
- bar = 0;
-#endif
- ioaddr = pci_iomap(pdev, bar, netdev_res_size);
+
+ ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size);
if (!ioaddr)
goto err_out_free_res;
@@ -838,7 +818,7 @@ static void init_rxtx_rings(struct net_device *dev)
np->rx_buf_sz,PCI_DMA_FROMDEVICE);
np->rx_ring[i].buffer1 = np->rx_addr[i];
- np->rx_ring[i].status = DescOwn;
+ np->rx_ring[i].status = DescOwned;
}
np->cur_rx = 0;
@@ -923,7 +903,7 @@ static void init_registers(struct net_device *dev)
}
#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
i |= 0xE000;
-#elif defined(__sparc__)
+#elif defined(__sparc__) || defined (CONFIG_PARISC)
i |= 0x4800;
#else
#warning Processor architecture undefined
@@ -1043,11 +1023,11 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
/* Now acquire the irq spinlock.
* The difficult race is the the ordering between
- * increasing np->cur_tx and setting DescOwn:
+ * increasing np->cur_tx and setting DescOwned:
* - if np->cur_tx is increased first the interrupt
* handler could consider the packet as transmitted
- * since DescOwn is cleared.
- * - If DescOwn is set first the NIC could report the
+ * since DescOwned is cleared.
+ * - If DescOwned is set first the NIC could report the
* packet as sent, but the interrupt handler would ignore it
* since the np->cur_tx was not yet increased.
*/
@@ -1055,7 +1035,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
np->cur_tx++;
wmb(); /* flush length, buffer1, buffer2 */
- np->tx_ring[entry].status = DescOwn;
+ np->tx_ring[entry].status = DescOwned;
wmb(); /* flush status and kick the hardware */
iowrite32(0, np->base_addr + TxStartDemand);
np->tx_q_bytes += skb->len;
@@ -1155,12 +1135,12 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs
handled = 1;
- if (intr_status & (IntrRxDone | RxNoBuf))
+ if (intr_status & (RxIntr | RxNoBuf))
netdev_rx(dev);
if (intr_status & RxNoBuf)
iowrite32(0, ioaddr + RxStartDemand);
- if (intr_status & (TxIdle | IntrTxDone) &&
+ if (intr_status & (TxNoBuf | TxIntr) &&
np->cur_tx != np->dirty_tx) {
spin_lock(&np->lock);
netdev_tx_done(dev);
@@ -1168,8 +1148,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs
}
/* Abnormal error summary/uncommon events handlers. */
- if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr |
- TimerInt | IntrTxStopped))
+ if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SytemError |
+ TimerInt | TxDied))
netdev_error(dev, intr_status);
if (--work_limit < 0) {
@@ -1305,7 +1285,7 @@ static int netdev_rx(struct net_device *dev)
np->rx_ring[entry].buffer1 = np->rx_addr[entry];
}
wmb();
- np->rx_ring[entry].status = DescOwn;
+ np->rx_ring[entry].status = DescOwned;
}
return 0;
@@ -1342,7 +1322,7 @@ static void netdev_error(struct net_device *dev, int intr_status)
dev->name, new);
update_csr6(dev, new);
}
- if (intr_status & IntrRxDied) { /* Missed a Rx frame. */
+ if (intr_status & RxDied) { /* Missed a Rx frame. */
np->stats.rx_errors++;
}
if (intr_status & TimerInt) {
@@ -1381,13 +1361,13 @@ static u32 __set_rx_mode(struct net_device *dev)
/* Unconditionally log net taps. */
printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
memset(mc_filter, 0xff, sizeof(mc_filter));
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys
+ rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
| AcceptMyPhys;
} else if ((dev->mc_count > multicast_filter_limit)
|| (dev->flags & IFF_ALLMULTI)) {
/* Too many to match, or accept all multicasts. */
memset(mc_filter, 0xff, sizeof(mc_filter));
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
} else {
struct dev_mc_list *mclist;
int i;
@@ -1398,7 +1378,7 @@ static u32 __set_rx_mode(struct net_device *dev)
filterbit &= 0x3f;
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
}
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
}
iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
iowrite32(mc_filter[1], ioaddr + MulticastFilter1);