aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorSarah Sharp <sarah.a.sharp@linux.intel.com>2009-08-07 14:04:55 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2009-09-23 06:46:17 -0700
commitac9d8fe7c6a8041cca5a0738915d2c4e21381421 (patch)
tree6ac3db149d39a61900e6df41ab9424f933a51489 /drivers
parent82d1009f537c2a43be0a410abd33521f76ee3a5a (diff)
USB: xhci: Add quirk for Fresco Logic xHCI hardware.
This Fresco Logic xHCI host controller chip revision puts bad data into the output endpoint context after a Reset Endpoint command. It needs a Configure Endpoint command (instead of a Set TR Dequeue Pointer command) after the reset endpoint command. Set up the input context before issuing the Reset Endpoint command so we don't copy bad data from the output endpoint context. The HW also can't handle two commands queued at once, so submit the TRB for the Configure Endpoint command in the event handler for the Reset Endpoint command. Devices that stall on control endpoints before a configuration is selected will not work under this Fresco Logic xHCI host controller revision. This patch is for prototype hardware that will be given to other companies for evaluation purposes only, and should not reach consumer hands. Fresco Logic's next chip rev should have this bug fixed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/host/xhci-hcd.c77
-rw-r--r--drivers/usb/host/xhci-pci.c13
-rw-r--r--drivers/usb/host/xhci-ring.c61
-rw-r--r--drivers/usb/host/xhci.h20
4 files changed, 148 insertions, 23 deletions
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index 4353c1c7893..1d4a1e3f953 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -224,7 +224,7 @@ int xhci_init(struct usb_hcd *hcd)
xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
xhci->quirks |= XHCI_LINK_TRB_QUIRK;
} else {
- xhci_dbg(xhci, "xHCI has no QUIRKS\n");
+ xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
}
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");
@@ -567,13 +567,22 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
return 1 << (xhci_get_endpoint_index(desc) + 1);
}
+/* Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index)
+{
+ return 1 << (ep_index + 1);
+}
+
/* Compute the last valid endpoint context index. Basically, this is the
* endpoint index plus one. For slot contexts with more than valid endpoint,
* we find the most significant bit set in the added contexts flags.
* e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
* fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
*/
-static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
{
return fls(added_ctxs) - 1;
}
@@ -1230,8 +1239,44 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
xhci_zero_in_ctx(xhci, virt_dev);
}
+void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_dequeue_state *deq_state)
+{
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 added_ctxs;
+ dma_addr_t addr;
+
+ xhci_endpoint_copy(xhci, xhci->devs[slot_id], ep_index);
+ in_ctx = xhci->devs[slot_id]->in_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+ addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
+ deq_state->new_deq_ptr);
+ if (addr == 0) {
+ xhci_warn(xhci, "WARN Cannot submit config ep after "
+ "reset ep command\n");
+ xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n",
+ deq_state->new_deq_seg,
+ deq_state->new_deq_ptr);
+ return;
+ }
+ ep_ctx->deq = addr | deq_state->new_cycle_state;
+
+ xhci_slot_copy(xhci, xhci->devs[slot_id]);
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
+ ctrl_ctx->add_flags = added_ctxs | SLOT_FLAG;
+ ctrl_ctx->drop_flags = added_ctxs;
+
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", slot_id);
+ xhci_dbg_ctx(xhci, in_ctx, ep_index);
+}
+
void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
- struct usb_device *udev, struct usb_host_endpoint *ep,
+ struct usb_device *udev,
unsigned int ep_index, struct xhci_ring *ep_ring)
{
struct xhci_dequeue_state deq_state;
@@ -1241,12 +1286,26 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
* or it will attempt to resend it on the next doorbell ring.
*/
xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, ep_ring->stopped_td, &deq_state);
+ ep_index, ep_ring->stopped_td,
+ &deq_state);
- xhci_dbg(xhci, "Queueing new dequeue state\n");
- xhci_queue_new_dequeue_state(xhci, ep_ring,
- udev->slot_id,
- ep_index, &deq_state);
+ /* HW with the reset endpoint quirk will use the saved dequeue state to
+ * issue a configure endpoint command later.
+ */
+ if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
+ xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ udev->slot_id,
+ ep_index, &deq_state);
+ } else {
+ /* Better hope no one uses the input context between now and the
+ * reset endpoint completion!
+ */
+ xhci_dbg(xhci, "Setting up input context for "
+ "configure endpoint command\n");
+ xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+ ep_index, &deq_state);
+ }
}
/* Deal with stalled endpoints. The core should have sent the control message
@@ -1293,7 +1352,7 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
* command. Better hope that last command worked!
*/
if (!ret) {
- xhci_cleanup_stalled_ring(xhci, udev, ep, ep_index, ep_ring);
+ xhci_cleanup_stalled_ring(xhci, udev, ep_index, ep_ring);
kfree(ep_ring->stopped_td);
xhci_ring_cmd_db(xhci);
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 592fe7e623f..8fb308d43bc 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -24,6 +24,10 @@
#include "xhci.h"
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
+
static const char hcd_name[] = "xhci_hcd";
/* called after powerup, by probe or system-pm "wakeup" */
@@ -62,6 +66,15 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
xhci_print_registers(xhci);
+ /* Look for vendor-specific quirks */
+ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+ pdev->revision == 0x0) {
+ xhci->quirks |= XHCI_RESET_EP_QUIRK;
+ xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
+ " endpoint cmd after reset endpoint\n");
+ }
+
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
if (retval)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index c831194b096..35374ddc31c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -469,7 +469,6 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
* ring running.
*/
ep_ring->state |= SET_DEQ_PENDING;
- xhci_ring_cmd_db(xhci);
}
/*
@@ -538,6 +537,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
xhci_queue_new_dequeue_state(xhci, ep_ring,
slot_id, ep_index, &deq_state);
+ xhci_ring_cmd_db(xhci);
} else {
/* Otherwise just ring the doorbell to restart the ring */
ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -651,18 +651,31 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
{
int slot_id;
unsigned int ep_index;
+ struct xhci_ring *ep_ring;
slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
/* This command will only fail if the endpoint wasn't halted,
* but we don't care.
*/
xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
(unsigned int) GET_COMP_CODE(event->status));
- /* Clear our internal halted state and restart the ring */
- xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
- ring_ep_doorbell(xhci, slot_id, ep_index);
+ /* HW with the reset endpoint quirk needs to have a configure endpoint
+ * command complete before the endpoint can be used. Queue that here
+ * because the HW can't handle two commands being queued in a row.
+ */
+ if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
+ xhci_dbg(xhci, "Queueing configure endpoint command\n");
+ xhci_queue_configure_endpoint(xhci,
+ xhci->devs[slot_id]->in_ctx->dma, slot_id);
+ xhci_ring_cmd_db(xhci);
+ } else {
+ /* Clear our internal halted state and restart the ring */
+ ep_ring->state &= ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ }
}
static void handle_cmd_completion(struct xhci_hcd *xhci,
@@ -671,6 +684,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
int slot_id = TRB_TO_SLOT_ID(event->flags);
u64 cmd_dma;
dma_addr_t cmd_dequeue_dma;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ unsigned int ep_state;
cmd_dma = event->cmd_trb;
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
@@ -698,8 +715,39 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
xhci_free_virt_device(xhci, slot_id);
break;
case TRB_TYPE(TRB_CONFIG_EP):
- xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
- complete(&xhci->devs[slot_id]->cmd_completion);
+ /*
+ * Configure endpoint commands can come from the USB core
+ * configuration or alt setting changes, or because the HW
+ * needed an extra configure endpoint command after a reset
+ * endpoint command. In the latter case, the xHCI driver is
+ * not waiting on the configure endpoint command.
+ */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci,
+ xhci->devs[slot_id]->in_ctx);
+ /* Input ctx add_flags are the endpoint index plus one */
+ ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1;
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ if (!ep_ring) {
+ /* This must have been an initial configure endpoint */
+ xhci->devs[slot_id]->cmd_status =
+ GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ break;
+ }
+ ep_state = ep_ring->state;
+ xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, "
+ "state = %d\n", ep_index, ep_state);
+ if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
+ ep_state & EP_HALTED) {
+ /* Clear our internal halted state and restart ring */
+ xhci->devs[slot_id]->ep_rings[ep_index]->state &=
+ ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ } else {
+ xhci->devs[slot_id]->cmd_status =
+ GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ }
break;
case TRB_TYPE(TRB_EVAL_CONTEXT):
xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
@@ -958,7 +1006,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_queue_reset_ep(xhci, slot_id, ep_index);
xhci_cleanup_stalled_ring(xhci,
td->urb->dev,
- td->urb->ep,
ep_index, ep_ring);
xhci_ring_cmd_db(xhci);
goto td_cleanup;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index b1abaeb62b4..bc64b500feb 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -929,6 +929,12 @@ struct xhci_td {
union xhci_trb *last_trb;
};
+struct xhci_dequeue_state {
+ struct xhci_segment *new_deq_seg;
+ union xhci_trb *new_deq_ptr;
+ int new_cycle_state;
+};
+
struct xhci_ring {
struct xhci_segment *first_seg;
union xhci_trb *enqueue;
@@ -955,12 +961,6 @@ struct xhci_ring {
u32 cycle_state;
};
-struct xhci_dequeue_state {
- struct xhci_segment *new_deq_seg;
- union xhci_trb *new_deq_ptr;
- int new_cycle_state;
-};
-
struct xhci_erst_entry {
/* 64-bit event ring segment address */
u64 seg_addr;
@@ -1063,6 +1063,7 @@ struct xhci_hcd {
int error_bitmask;
unsigned int quirks;
#define XHCI_LINK_TRB_QUIRK (1 << 0)
+#define XHCI_RESET_EP_QUIRK (1 << 1)
};
/* For testing purposes */
@@ -1170,6 +1171,8 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
void xhci_endpoint_copy(struct xhci_hcd *xhci,
struct xhci_virt_device *vdev, unsigned int ep_index);
@@ -1233,8 +1236,11 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
struct xhci_ring *ep_ring, unsigned int slot_id,
unsigned int ep_index, struct xhci_dequeue_state *deq_state);
void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
- struct usb_device *udev, struct usb_host_endpoint *ep,
+ struct usb_device *udev,
unsigned int ep_index, struct xhci_ring *ep_ring);
+void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_dequeue_state *deq_state);
/* xHCI roothub code */
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,