aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorBrice Goglin <brice@myri.com>2008-12-25 18:08:59 -0800
committerDavid S. Miller <davem@davemloft.net>2008-12-25 18:08:59 -0800
commite92df2820d2d8de4be3dcbad96eb144ce6fd550d (patch)
tree295d65955ef94b804eaba01013c14f7d2a5a8da2 /drivers
parent36994a0a7004fd4777cd93a4b658b5f84bf4c93e (diff)
myri10ge: update firmware headers to 1.4.37
Update myri10ge firmware headers to 1.4.37: * Make each member of the error/cmd enum an initialized one, so there is a convenient numerical reference to look for reverse conversion. * Add new MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT command. * Add new "features" field to mcp_header. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/myri10ge/myri10ge_mcp.h175
-rw-r--r--drivers/net/myri10ge/myri10ge_mcp_gen_header.h1
2 files changed, 93 insertions, 83 deletions
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index 99372109077..11be150e4d6 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -111,61 +111,61 @@ enum myri10ge_mcp_cmd_type {
MXGEFW_CMD_NONE = 0,
/* Reset the mcp, it is left in a safe state, waiting
* for the driver to set all its parameters */
- MXGEFW_CMD_RESET,
+ MXGEFW_CMD_RESET = 1,
/* get the version number of the current firmware..
* (may be available in the eeprom strings..? */
- MXGEFW_GET_MCP_VERSION,
+ MXGEFW_GET_MCP_VERSION = 2,
/* Parameters which must be set by the driver before it can
* issue MXGEFW_CMD_ETHERNET_UP. They persist until the next
* MXGEFW_CMD_RESET is issued */
- MXGEFW_CMD_SET_INTRQ_DMA,
+ MXGEFW_CMD_SET_INTRQ_DMA = 3,
/* data0 = LSW of the host address
* data1 = MSW of the host address
* data2 = slice number if multiple slices are used
*/
- MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */
- MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */
+ MXGEFW_CMD_SET_BIG_BUFFER_SIZE = 4, /* in bytes, power of 2 */
+ MXGEFW_CMD_SET_SMALL_BUFFER_SIZE = 5, /* in bytes */
/* Parameters which refer to lanai SRAM addresses where the
* driver must issue PIO writes for various things */
- MXGEFW_CMD_GET_SEND_OFFSET,
- MXGEFW_CMD_GET_SMALL_RX_OFFSET,
- MXGEFW_CMD_GET_BIG_RX_OFFSET,
+ MXGEFW_CMD_GET_SEND_OFFSET = 6,
+ MXGEFW_CMD_GET_SMALL_RX_OFFSET = 7,
+ MXGEFW_CMD_GET_BIG_RX_OFFSET = 8,
/* data0 = slice number if multiple slices are used */
- MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
- MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
+ MXGEFW_CMD_GET_IRQ_ACK_OFFSET = 9,
+ MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET = 10,
/* Parameters which refer to rings stored on the MCP,
* and whose size is controlled by the mcp */
- MXGEFW_CMD_GET_SEND_RING_SIZE, /* in bytes */
- MXGEFW_CMD_GET_RX_RING_SIZE, /* in bytes */
+ MXGEFW_CMD_GET_SEND_RING_SIZE = 11, /* in bytes */
+ MXGEFW_CMD_GET_RX_RING_SIZE = 12, /* in bytes */
/* Parameters which refer to rings stored in the host,
* and whose size is controlled by the host. Note that
* all must be physically contiguous and must contain
* a power of 2 number of entries. */
- MXGEFW_CMD_SET_INTRQ_SIZE, /* in bytes */
+ MXGEFW_CMD_SET_INTRQ_SIZE = 13, /* in bytes */
#define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK (1 << 31)
/* command to bring ethernet interface up. Above parameters
* (plus mtu & mac address) must have been exchanged prior
* to issuing this command */
- MXGEFW_CMD_ETHERNET_UP,
+ MXGEFW_CMD_ETHERNET_UP = 14,
/* command to bring ethernet interface down. No further sends
* or receives may be processed until an MXGEFW_CMD_ETHERNET_UP
* is issued, and all interrupt queues must be flushed prior
* to ack'ing this command */
- MXGEFW_CMD_ETHERNET_DOWN,
+ MXGEFW_CMD_ETHERNET_DOWN = 15,
/* commands the driver may issue live, without resetting
* the nic. Note that increasing the mtu "live" should
@@ -173,40 +173,40 @@ enum myri10ge_mcp_cmd_type {
* sufficiently large to handle the new mtu. Decreasing
* the mtu live is safe */
- MXGEFW_CMD_SET_MTU,
- MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, /* in microseconds */
- MXGEFW_CMD_SET_STATS_INTERVAL, /* in microseconds */
- MXGEFW_CMD_SET_STATS_DMA_OBSOLETE, /* replaced by SET_STATS_DMA_V2 */
+ MXGEFW_CMD_SET_MTU = 16,
+ MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET = 17, /* in microseconds */
+ MXGEFW_CMD_SET_STATS_INTERVAL = 18, /* in microseconds */
+ MXGEFW_CMD_SET_STATS_DMA_OBSOLETE = 19, /* replaced by SET_STATS_DMA_V2 */
- MXGEFW_ENABLE_PROMISC,
- MXGEFW_DISABLE_PROMISC,
- MXGEFW_SET_MAC_ADDRESS,
+ MXGEFW_ENABLE_PROMISC = 20,
+ MXGEFW_DISABLE_PROMISC = 21,
+ MXGEFW_SET_MAC_ADDRESS = 22,
- MXGEFW_ENABLE_FLOW_CONTROL,
- MXGEFW_DISABLE_FLOW_CONTROL,
+ MXGEFW_ENABLE_FLOW_CONTROL = 23,
+ MXGEFW_DISABLE_FLOW_CONTROL = 24,
/* do a DMA test
* data0,data1 = DMA address
* data2 = RDMA length (MSH), WDMA length (LSH)
* command return data = repetitions (MSH), 0.5-ms ticks (LSH)
*/
- MXGEFW_DMA_TEST,
+ MXGEFW_DMA_TEST = 25,
- MXGEFW_ENABLE_ALLMULTI,
- MXGEFW_DISABLE_ALLMULTI,
+ MXGEFW_ENABLE_ALLMULTI = 26,
+ MXGEFW_DISABLE_ALLMULTI = 27,
/* returns MXGEFW_CMD_ERROR_MULTICAST
* if there is no room in the cache
* data0,MSH(data1) = multicast group address */
- MXGEFW_JOIN_MULTICAST_GROUP,
+ MXGEFW_JOIN_MULTICAST_GROUP = 28,
/* returns MXGEFW_CMD_ERROR_MULTICAST
* if the address is not in the cache,
* or is equal to FF-FF-FF-FF-FF-FF
* data0,MSH(data1) = multicast group address */
- MXGEFW_LEAVE_MULTICAST_GROUP,
- MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
+ MXGEFW_LEAVE_MULTICAST_GROUP = 29,
+ MXGEFW_LEAVE_ALL_MULTICAST_GROUPS = 30,
- MXGEFW_CMD_SET_STATS_DMA_V2,
+ MXGEFW_CMD_SET_STATS_DMA_V2 = 31,
/* data0, data1 = bus addr,
* data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
* adding new stuff to mcp_irq_data without changing the ABI
@@ -216,14 +216,14 @@ enum myri10ge_mcp_cmd_type {
* (in the upper 16 bits).
*/
- MXGEFW_CMD_UNALIGNED_TEST,
+ MXGEFW_CMD_UNALIGNED_TEST = 32,
/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
* chipset */
- MXGEFW_CMD_UNALIGNED_STATUS,
+ MXGEFW_CMD_UNALIGNED_STATUS = 33,
/* return data = boolean, true if the chipset is known to be unaligned */
- MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS,
+ MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS = 34,
/* data0 = number of big buffers to use. It must be 0 or a power of 2.
* 0 indicates that the NIC consumes as many buffers as they are required
* for packet. This is the default behavior.
@@ -233,8 +233,8 @@ enum myri10ge_mcp_cmd_type {
* the NIC to be able to receive maximum-sized packets.
*/
- MXGEFW_CMD_GET_MAX_RSS_QUEUES,
- MXGEFW_CMD_ENABLE_RSS_QUEUES,
+ MXGEFW_CMD_GET_MAX_RSS_QUEUES = 35,
+ MXGEFW_CMD_ENABLE_RSS_QUEUES = 36,
/* data0 = number of slices n (0, 1, ..., n-1) to enable
* data1 = interrupt mode | use of multiple transmit queues.
* 0=share one INTx/MSI.
@@ -249,18 +249,18 @@ enum myri10ge_mcp_cmd_type {
#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1
#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
- MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
- MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
+ MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET = 37,
+ MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA = 38,
/* data0, data1 = bus address lsw, msw */
- MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
+ MXGEFW_CMD_GET_RSS_TABLE_OFFSET = 39,
/* get the offset of the indirection table */
- MXGEFW_CMD_SET_RSS_TABLE_SIZE,
+ MXGEFW_CMD_SET_RSS_TABLE_SIZE = 40,
/* set the size of the indirection table */
- MXGEFW_CMD_GET_RSS_KEY_OFFSET,
+ MXGEFW_CMD_GET_RSS_KEY_OFFSET = 41,
/* get the offset of the secret key */
- MXGEFW_CMD_RSS_KEY_UPDATED,
+ MXGEFW_CMD_RSS_KEY_UPDATED = 42,
/* tell nic that the secret key's been updated */
- MXGEFW_CMD_SET_RSS_ENABLE,
+ MXGEFW_CMD_SET_RSS_ENABLE = 43,
/* data0 = enable/disable rss
* 0: disable rss. nic does not distribute receive packets.
* 1: enable rss. nic distributes receive packets among queues.
@@ -277,7 +277,7 @@ enum myri10ge_mcp_cmd_type {
#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
#define MXGEFW_RSS_HASH_TYPE_MAX 0x5
- MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
+ MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE = 44,
/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
* If the header size of a IPv6 TSO packet is larger than the specified
* value, then the driver must not use TSO.
@@ -286,7 +286,7 @@ enum myri10ge_mcp_cmd_type {
* always has enough header buffer to store maximum-sized headers.
*/
- MXGEFW_CMD_SET_TSO_MODE,
+ MXGEFW_CMD_SET_TSO_MODE = 45,
/* data0 = TSO mode.
* 0: Linux/FreeBSD style (NIC default)
* 1: NDIS/NetBSD style
@@ -294,33 +294,37 @@ enum myri10ge_mcp_cmd_type {
#define MXGEFW_TSO_MODE_LINUX 0
#define MXGEFW_TSO_MODE_NDIS 1
- MXGEFW_CMD_MDIO_READ,
+ MXGEFW_CMD_MDIO_READ = 46,
/* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */
- MXGEFW_CMD_MDIO_WRITE,
+ MXGEFW_CMD_MDIO_WRITE = 47,
/* data0 = dev_addr, data1 = register/addr, data2 = value */
- MXGEFW_CMD_XFP_I2C_READ,
- /* Starts to get a fresh copy of one byte or of the whole xfp i2c table, the
+ MXGEFW_CMD_I2C_READ = 48,
+ /* Starts to get a fresh copy of one byte or of the module i2c table, the
* obtained data is cached inside the xaui-xfi chip :
- * data0 : "all" flag : 0 => get one byte, 1=> get 256 bytes,
- * data1 : if (data0 == 0): index of byte to refresh [ not used otherwise ]
+ * data0 : 0 => get one byte, 1=> get 256 bytes
+ * data1 : If data0 == 0: location to refresh
+ * bit 7:0 register location
+ * bit 8:15 is the i2c slave addr (0 is interpreted as 0xA1)
+ * bit 23:16 is the i2c bus number (for multi-port NICs)
+ * If data0 == 1: unused
* The operation might take ~1ms for a single byte or ~65ms when refreshing all 256 bytes
- * During the i2c operation, MXGEFW_CMD_XFP_I2C_READ or MXGEFW_CMD_XFP_BYTE attempts
+ * During the i2c operation, MXGEFW_CMD_I2C_READ or MXGEFW_CMD_I2C_BYTE attempts
* will return MXGEFW_CMD_ERROR_BUSY
*/
- MXGEFW_CMD_XFP_BYTE,
+ MXGEFW_CMD_I2C_BYTE = 49,
/* Return the last obtained copy of a given byte in the xfp i2c table
- * (copy cached during the last relevant MXGEFW_CMD_XFP_I2C_READ)
+ * (copy cached during the last relevant MXGEFW_CMD_I2C_READ)
* data0 : index of the desired table entry
* Return data = the byte stored at the requested index in the table
*/
- MXGEFW_CMD_GET_VPUMP_OFFSET,
+ MXGEFW_CMD_GET_VPUMP_OFFSET = 50,
/* Return data = NIC memory offset of mcp_vpump_public_global */
- MXGEFW_CMD_RESET_VPUMP,
+ MXGEFW_CMD_RESET_VPUMP = 51,
/* Resets the VPUMP state */
- MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE,
+ MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE = 52,
/* data0 = mcp_slot type to use.
* 0 = the default 4B mcp_slot
* 1 = 8B mcp_slot_8
@@ -328,7 +332,7 @@ enum myri10ge_mcp_cmd_type {
#define MXGEFW_RSS_MCP_SLOT_TYPE_MIN 0
#define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH 1
- MXGEFW_CMD_SET_THROTTLE_FACTOR,
+ MXGEFW_CMD_SET_THROTTLE_FACTOR = 53,
/* set the throttle factor for ethp_z8e
* data0 = throttle_factor
* throttle_factor = 256 * pcie-raw-speed / tx_speed
@@ -344,45 +348,50 @@ enum myri10ge_mcp_cmd_type {
* with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s
*/
- MXGEFW_CMD_VPUMP_UP,
+ MXGEFW_CMD_VPUMP_UP = 54,
/* Allocates VPump Connection, Send Request and Zero copy buffer address tables */
- MXGEFW_CMD_GET_VPUMP_CLK,
+ MXGEFW_CMD_GET_VPUMP_CLK = 55,
/* Get the lanai clock */
- MXGEFW_CMD_GET_DCA_OFFSET,
+ MXGEFW_CMD_GET_DCA_OFFSET = 56,
/* offset of dca control for WDMAs */
/* VMWare NetQueue commands */
- MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE,
- MXGEFW_CMD_NETQ_ADD_FILTER,
+ MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE = 57,
+ MXGEFW_CMD_NETQ_ADD_FILTER = 58,
/* data0 = filter_id << 16 | queue << 8 | type */
/* data1 = MS4 of MAC Addr */
/* data2 = LS2_MAC << 16 | VLAN_tag */
- MXGEFW_CMD_NETQ_DEL_FILTER,
+ MXGEFW_CMD_NETQ_DEL_FILTER = 59,
/* data0 = filter_id */
- MXGEFW_CMD_NETQ_QUERY1,
- MXGEFW_CMD_NETQ_QUERY2,
- MXGEFW_CMD_NETQ_QUERY3,
- MXGEFW_CMD_NETQ_QUERY4,
-
+ MXGEFW_CMD_NETQ_QUERY1 = 60,
+ MXGEFW_CMD_NETQ_QUERY2 = 61,
+ MXGEFW_CMD_NETQ_QUERY3 = 62,
+ MXGEFW_CMD_NETQ_QUERY4 = 63,
+
+ MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT = 64,
+ /* When set, small receive buffers can cross page boundaries.
+ * Both small and big receive buffers may start at any address.
+ * This option has performance implications, so use with caution.
+ */
};
enum myri10ge_mcp_cmd_status {
MXGEFW_CMD_OK = 0,
- MXGEFW_CMD_UNKNOWN,
- MXGEFW_CMD_ERROR_RANGE,
- MXGEFW_CMD_ERROR_BUSY,
- MXGEFW_CMD_ERROR_EMPTY,
- MXGEFW_CMD_ERROR_CLOSED,
- MXGEFW_CMD_ERROR_HASH_ERROR,
- MXGEFW_CMD_ERROR_BAD_PORT,
- MXGEFW_CMD_ERROR_RESOURCES,
- MXGEFW_CMD_ERROR_MULTICAST,
- MXGEFW_CMD_ERROR_UNALIGNED,
- MXGEFW_CMD_ERROR_NO_MDIO,
- MXGEFW_CMD_ERROR_XFP_FAILURE,
- MXGEFW_CMD_ERROR_XFP_ABSENT,
- MXGEFW_CMD_ERROR_BAD_PCIE_LINK
+ MXGEFW_CMD_UNKNOWN = 1,
+ MXGEFW_CMD_ERROR_RANGE = 2,
+ MXGEFW_CMD_ERROR_BUSY = 3,
+ MXGEFW_CMD_ERROR_EMPTY = 4,
+ MXGEFW_CMD_ERROR_CLOSED = 5,
+ MXGEFW_CMD_ERROR_HASH_ERROR = 6,
+ MXGEFW_CMD_ERROR_BAD_PORT = 7,
+ MXGEFW_CMD_ERROR_RESOURCES = 8,
+ MXGEFW_CMD_ERROR_MULTICAST = 9,
+ MXGEFW_CMD_ERROR_UNALIGNED = 10,
+ MXGEFW_CMD_ERROR_NO_MDIO = 11,
+ MXGEFW_CMD_ERROR_I2C_FAILURE = 12,
+ MXGEFW_CMD_ERROR_I2C_ABSENT = 13,
+ MXGEFW_CMD_ERROR_BAD_PCIE_LINK = 14
};
#define MXGEFW_OLD_IRQ_DATA_LEN 40
diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
index 124bbeac512..caa6cbbb631 100644
--- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
@@ -42,6 +42,7 @@ struct mcp_gen_header {
unsigned short handoff_id_caps; /* bitfield: new mcp must have superset */
unsigned msix_table_addr; /* start address of msix table in firmware */
unsigned bss_addr; /* start of bss */
+ unsigned features;
/* 8 */
};