Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: remove needless double parenthesis
  sdhci: Specific quirk vor VIA SDHCI controller in VX855ES
  s3cmci: fix dma configuration call
  mmc: Add new via-sdmmc host controller driver
  sdhci: Add support for hosts that are only capable of 1-bit transfers
  MAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface)
  sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk
  sdhci: Add better ADMA error reporting
  sdhci-s3c: Samsung S3C based SDHCI controller glue

9 files changed, 1905 insertions, 6 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 40111a6d8d5..891ef18bd77 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -94,6 +94,31 @@ config MMC_SDHCI_PLTFM
 
 	  If unsure, say N.
 
+config MMC_SDHCI_S3C
+	tristate "SDHCI support on Samsung S3C SoC"
+	depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  often referrered to as the HSMMC block in some of the Samsung S3C
+	  range of SoC.
+
+	  Note, due to the problems with DMA, the DMA support is only
+	  available with CONFIG_EXPERIMENTAL is selected.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_S3C_DMA
+	bool "DMA support on S3C SDHCI"
+	depends on MMC_SDHCI_S3C && EXPERIMENTAL
+	help
+	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
+	  has proved to be problematic if the controller encounters
+	  certain errors, and thus should be treated with care.
+
+	  YMMV.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -265,3 +290,14 @@ config MMC_CB710
 	  This driver can also be built as a module. If so, the module
 	  will be called cb710-mmc.
 
+config MMC_VIA_SDMMC
+	tristate "VIA SD/MMC Card Reader Driver"
+	depends on PCI
+	help
+	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
+	  VIA provides one multi-functional card reader which integrated into
+	  some motherboards manufactured by VIA. This card reader supports
+	  SD/MMC/SDHC.
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 79da397c5fe..cf153f62845 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
 obj-$(CONFIG_MMC_SDHCI_PLTFM)	+= sdhci-pltfm.o
+obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
@@ -31,6 +32,7 @@ obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
 obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 4eb4f37544a..8c08cd7efa7 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -794,7 +794,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
-		s3c2410_dma_config(host->dma, 4, 0);
+		s3c2410_dma_config(host->dma, 4);
 		s3c2410_dma_set_buffdone_fn(host->dma,
 					    s3cmci_dma_done_callback);
 		s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index 128c614d11a..d79fa55c3b8 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -250,6 +250,9 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
 		host->ops = &sdhci_of_data->ops;
 	}
 
+	if (of_get_property(np, "sdhci,1-bit-only", NULL))
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+
 	clk = of_get_property(np, "clock-frequency", &size);
 	if (clk && size == sizeof(*clk) && *clk)
 		of_host->clock = *clk;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 65be27995d5..2f15cc17d88 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -284,6 +284,18 @@ static const struct sdhci_pci_fixes sdhci_jmicron = {
 	.resume		= jmicron_resume,
 };
 
+static int via_probe(struct sdhci_pci_chip *chip)
+{
+	if (chip->pdev->revision == 0x10)
+		chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
+
+	return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_via = {
+	.probe		= via_probe,
+};
+
 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
 		.vendor		= PCI_VENDOR_ID_RICOH,
@@ -349,6 +361,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_VIA,
+		.device		= 0x95d0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_via,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
new file mode 100644
index 00000000000..50997d2a63e
--- /dev/null
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -0,0 +1,428 @@
+/* linux/drivers/mmc/host/sdhci-s3c.c
+ *
+ * Copyright 2008 Openmoko Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SDHCI (HSMMC) support for Samsung SoC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <linux/mmc/host.h>
+
+#include <plat/sdhci.h>
+#include <plat/regs-sdhci.h>
+
+#include "sdhci.h"
+
+#define MAX_BUS_CLK	(4)
+
+/**
+ * struct sdhci_s3c - S3C SDHCI instance
+ * @host: The SDHCI host created
+ * @pdev: The platform device we where created from.
+ * @ioarea: The resource created when we claimed the IO area.
+ * @pdata: The platform data for this controller.
+ * @cur_clk: The index of the current bus clock.
+ * @clk_io: The clock for the internal bus interface.
+ * @clk_bus: The clocks that are available for the SD/MMC bus clock.
+ */
+struct sdhci_s3c {
+	struct sdhci_host	*host;
+	struct platform_device	*pdev;
+	struct resource		*ioarea;
+	struct s3c_sdhci_platdata *pdata;
+	unsigned int		cur_clk;
+
+	struct clk		*clk_io;
+	struct clk		*clk_bus[MAX_BUS_CLK];
+};
+
+static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
+{
+	return sdhci_priv(host);
+}
+
+/**
+ * get_curclk - convert ctrl2 register to clock source number
+ * @ctrl2: Control2 register value.
+ */
+static u32 get_curclk(u32 ctrl2)
+{
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+
+	return ctrl2;
+}
+
+static void sdhci_s3c_check_sclk(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	if (get_curclk(tmp) != ourhost->cur_clk) {
+		dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
+
+		tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+		tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+		writel(tmp, host->ioaddr + 0x80);
+	}
+}
+
+/**
+ * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
+ * @host: The SDHCI host instance.
+ *
+ * Callback to return the maximum clock rate acheivable by the controller.
+*/
+static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk;
+	unsigned int rate, max;
+	int clk;
+
+	/* note, a reset will reset the clock source */
+
+	sdhci_s3c_check_sclk(host);
+
+	for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
+		busclk = ourhost->clk_bus[clk];
+		if (!busclk)
+			continue;
+
+		rate = clk_get_rate(busclk);
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
+}
+
+static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
+{
+	return sdhci_s3c_get_max_clk(host) / 1000000;
+}
+
+/**
+ * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
+ * @ourhost: Our SDHCI instance.
+ * @src: The source clock index.
+ * @wanted: The clock frequency wanted.
+ */
+static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
+					     unsigned int src,
+					     unsigned int wanted)
+{
+	unsigned long rate;
+	struct clk *clksrc = ourhost->clk_bus[src];
+	int div;
+
+	if (!clksrc)
+		return UINT_MAX;
+
+	rate = clk_get_rate(clksrc);
+
+	for (div = 1; div < 256; div *= 2) {
+		if ((rate / div) <= wanted)
+			break;
+	}
+
+	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
+		src, rate, wanted, rate / div);
+
+	return (wanted - (rate / div));
+}
+
+/**
+ * sdhci_s3c_set_clock - callback on clock change
+ * @host: The SDHCI host being changed
+ * @clock: The clock rate being requested.
+ *
+ * When the card's clock is going to be changed, look at the new frequency
+ * and find the best clock source to go with it.
+*/
+static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned int best = UINT_MAX;
+	unsigned int delta;
+	int best_src = 0;
+	int src;
+	u32 ctrl;
+
+	/* don't bother if the clock is going off. */
+	if (clock == 0)
+		return;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
+		if (delta < best) {
+			best = delta;
+			best_src = src;
+		}
+	}
+
+	dev_dbg(&ourhost->pdev->dev,
+		"selected source %d, clock %d, delta %d\n",
+		 best_src, clock, best);
+
+	/* select the new clock source */
+
+	if (ourhost->cur_clk != best_src) {
+		struct clk *clk = ourhost->clk_bus[best_src];
+
+		/* turn clock off to card before changing clock source */
+		writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+		ourhost->cur_clk = best_src;
+		host->max_clk = clk_get_rate(clk);
+		host->timeout_clk = sdhci_s3c_get_timeout_clk(host);
+
+		ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+		ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+		ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+		writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+	}
+
+	/* reconfigure the hardware for new clock rate */
+
+	{
+		struct mmc_ios ios;
+
+		ios.clock = clock;
+
+		if (ourhost->pdata->cfg_card)
+			(ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr,
+						   &ios, NULL);
+	}
+}
+
+static struct sdhci_ops sdhci_s3c_ops = {
+	.get_max_clock		= sdhci_s3c_get_max_clk,
+	.get_timeout_clock	= sdhci_s3c_get_timeout_clk,
+	.set_clock		= sdhci_s3c_set_clock,
+};
+
+static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
+{
+	struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct sdhci_host *host;
+	struct sdhci_s3c *sc;
+	struct resource *res;
+	int ret, irq, ptr, clks;
+
+	if (!pdata) {
+		dev_err(dev, "no device data specified\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no irq specified\n");
+		return irq;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "no memory specified\n");
+		return -ENOENT;
+	}
+
+	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
+	if (IS_ERR(host)) {
+		dev_err(dev, "sdhci_alloc_host() failed\n");
+		return PTR_ERR(host);
+	}
+
+	sc = sdhci_priv(host);
+
+	sc->host = host;
+	sc->pdev = pdev;
+	sc->pdata = pdata;
+
+	platform_set_drvdata(pdev, host);
+
+	sc->clk_io = clk_get(dev, "hsmmc");
+	if (IS_ERR(sc->clk_io)) {
+		dev_err(dev, "failed to get io clock\n");
+		ret = PTR_ERR(sc->clk_io);
+		goto err_io_clk;
+	}
+
+	/* enable the local io clock and keep it running for the moment. */
+	clk_enable(sc->clk_io);
+
+	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+		struct clk *clk;
+		char *name = pdata->clocks[ptr];
+
+		if (name == NULL)
+			continue;
+
+		clk = clk_get(dev, name);
+		if (IS_ERR(clk)) {
+			dev_err(dev, "failed to get clock %s\n", name);
+			continue;
+		}
+
+		clks++;
+		sc->clk_bus[ptr] = clk;
+		clk_enable(clk);
+
+		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
+			 ptr, name, clk_get_rate(clk));
+	}
+
+	if (clks == 0) {
+		dev_err(dev, "failed to find any bus clocks\n");
+		ret = -ENOENT;
+		goto err_no_busclks;
+	}
+
+	sc->ioarea = request_mem_region(res->start, resource_size(res),
+					mmc_hostname(host->mmc));
+	if (!sc->ioarea) {
+		dev_err(dev, "failed to reserve register area\n");
+		ret = -ENXIO;
+		goto err_req_regs;
+	}
+
+	host->ioaddr = ioremap_nocache(res->start, resource_size(res));
+	if (!host->ioaddr) {
+		dev_err(dev, "failed to map registers\n");
+		ret = -ENXIO;
+		goto err_req_regs;
+	}
+
+	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdev, pdata->max_width);
+
+	host->hw_name = "samsung-hsmmc";
+	host->ops = &sdhci_s3c_ops;
+	host->quirks = 0;
+	host->irq = irq;
+
+	/* Setup quirks for the controller */
+
+	/* Currently with ADMA enabled we are getting some length
+	 * interrupts that are not being dealt with, do disable
+	 * ADMA until this is sorted out. */
+	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+	host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
+
+#ifndef CONFIG_MMC_SDHCI_S3C_DMA
+
+	/* we currently see overruns on errors, so disable the SDMA
+	 * support as well. */
+	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+	/* PIO currently has problems with multi-block IO */
+	host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
+#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
+
+	/* It seems we do not get an DATA transfer complete on non-busy
+	 * transfers, not sure if this is a problem with this specific
+	 * SDHCI block, or a missing configuration that needs to be set. */
+	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
+
+	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
+			 SDHCI_QUIRK_32BIT_DMA_SIZE);
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(dev, "sdhci_add_host() failed\n");
+		goto err_add_host;
+	}
+
+	return 0;
+
+ err_add_host:
+	release_resource(sc->ioarea);
+	kfree(sc->ioarea);
+
+ err_req_regs:
+	for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+		clk_disable(sc->clk_bus[ptr]);
+		clk_put(sc->clk_bus[ptr]);
+	}
+
+ err_no_busclks:
+	clk_disable(sc->clk_io);
+	clk_put(sc->clk_io);
+
+ err_io_clk:
+	sdhci_free_host(host);
+
+	return ret;
+}
+
+static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
+{
+	struct sdhci_host *host = platform_get_drvdata(dev);
+
+	sdhci_suspend_host(host, pm);
+	return 0;
+}
+
+static int sdhci_s3c_resume(struct platform_device *dev)
+{
+	struct sdhci_host *host = platform_get_drvdata(dev);
+
+	sdhci_resume_host(host);
+	return 0;
+}
+
+#else
+#define sdhci_s3c_suspend NULL
+#define sdhci_s3c_resume NULL
+#endif
+
+static struct platform_driver sdhci_s3c_driver = {
+	.probe		= sdhci_s3c_probe,
+	.remove		= __devexit_p(sdhci_s3c_remove),
+	.suspend	= sdhci_s3c_suspend,
+	.resume	        = sdhci_s3c_resume,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c-sdhci",
+	},
+};
+
+static int __init sdhci_s3c_init(void)
+{
+	return platform_driver_register(&sdhci_s3c_driver);
+}
+
+static void __exit sdhci_s3c_exit(void)
+{
+	platform_driver_unregister(&sdhci_s3c_driver);
+}
+
+module_init(sdhci_s3c_init);
+module_exit(sdhci_s3c_exit);
+
+MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-sdhci");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 35789c6edc1..6779b4ecab1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -584,7 +584,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
 	 * longer to time out, but that's much better than having a too-short
 	 * timeout value.
 	 */
-	if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL))
+	if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
 		return 0xE;
 
 	/* timeout in us */
@@ -1051,12 +1051,19 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
-	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+	if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
 		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
 	pwr |= SDHCI_POWER_ON;
 
 	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+	/*
+	 * Some controllers need an extra 10ms delay of 10ms before they
+	 * can apply clock after applying power
+	 */
+	if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
+		mdelay(10);
 }
 
 /*****************************************************************************\
@@ -1382,6 +1389,35 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
 		sdhci_finish_command(host);
 }
 
+#ifdef DEBUG
+static void sdhci_show_adma_error(struct sdhci_host *host)
+{
+	const char *name = mmc_hostname(host->mmc);
+	u8 *desc = host->adma_desc;
+	__le32 *dma;
+	__le16 *len;
+	u8 attr;
+
+	sdhci_dumpregs(host);
+
+	while (true) {
+		dma = (__le32 *)(desc + 4);
+		len = (__le16 *)(desc + 2);
+		attr = *desc;
+
+		DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+		    name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
+
+		desc += 8;
+
+		if (attr & 2)
+			break;
+	}
+}
+#else
+static void sdhci_show_adma_error(struct sdhci_host *host) { }
+#endif
+
 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 {
 	BUG_ON(intmask == 0);
@@ -1411,8 +1447,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		host->data->error = -ETIMEDOUT;
 	else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
 		host->data->error = -EILSEQ;
-	else if (intmask & SDHCI_INT_ADMA_ERROR)
+	else if (intmask & SDHCI_INT_ADMA_ERROR) {
+		printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
+		sdhci_show_adma_error(host);
 		host->data->error = -EIO;
+	}
 
 	if (host->data->error)
 		sdhci_finish_data(host);
@@ -1729,7 +1768,10 @@ int sdhci_add_host(struct sdhci_host *host)
 	mmc->ops = &sdhci_ops;
 	mmc->f_min = host->max_clk / 256;
 	mmc->f_max = host->max_clk;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+	mmc->caps = MMC_CAP_SDIO_IRQ;
+
+	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
@@ -1802,7 +1844,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	/*
 	 * Maximum block count.
 	 */
-	mmc->max_blk_count = 65535;
+	mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
 
 	/*
 	 * Init tasklets.
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 2de08349c3c..831ddf7dcb4 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -226,6 +226,12 @@ struct sdhci_host {
 #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
 /* Controller has to be forced to use block size of 2048 bytes */
 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+/* Controller cannot do multi-block transfers */
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
new file mode 100644
index 00000000000..632858a9437
--- /dev/null
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -0,0 +1,1362 @@
+/*
+ *  drivers/mmc/host/via-sdmmc.c - VIA SD/MMC Card Reader driver
+ *  Copyright (c) 2008, VIA Technologies Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+
+#include <linux/mmc/host.h>
+
+#define DRV_NAME	"via_sdmmc"
+
+#define PCI_DEVICE_ID_VIA_9530	0x9530
+
+#define VIA_CRDR_SDC_OFF	0x200
+#define VIA_CRDR_DDMA_OFF	0x400
+#define VIA_CRDR_PCICTRL_OFF	0x600
+
+#define VIA_CRDR_MIN_CLOCK	375000
+#define VIA_CRDR_MAX_CLOCK	48000000
+
+/*
+ * PCI registers
+ */
+
+#define VIA_CRDR_PCI_WORK_MODE	0x40
+#define VIA_CRDR_PCI_DBG_MODE	0x41
+
+/*
+ * SDC MMIO Registers
+ */
+
+#define VIA_CRDR_SDCTRL			0x0
+#define VIA_CRDR_SDCTRL_START		0x01
+#define VIA_CRDR_SDCTRL_WRITE		0x04
+#define VIA_CRDR_SDCTRL_SINGLE_WR	0x10
+#define VIA_CRDR_SDCTRL_SINGLE_RD	0x20
+#define VIA_CRDR_SDCTRL_MULTI_WR	0x30
+#define VIA_CRDR_SDCTRL_MULTI_RD	0x40
+#define VIA_CRDR_SDCTRL_STOP		0x70
+
+#define VIA_CRDR_SDCTRL_RSP_NONE	0x0
+#define VIA_CRDR_SDCTRL_RSP_R1		0x10000
+#define VIA_CRDR_SDCTRL_RSP_R2		0x20000
+#define VIA_CRDR_SDCTRL_RSP_R3		0x30000
+#define VIA_CRDR_SDCTRL_RSP_R1B		0x90000
+
+#define VIA_CRDR_SDCARG 	0x4
+
+#define VIA_CRDR_SDBUSMODE	0x8
+#define VIA_CRDR_SDMODE_4BIT	0x02
+#define VIA_CRDR_SDMODE_CLK_ON	0x40
+
+#define VIA_CRDR_SDBLKLEN	0xc
+/*
+ * Bit 0 -Bit 10 : Block length. So, the maximum block length should be 2048.
+ * Bit 11 - Bit 13 : Reserved.
+ * GPIDET : Select GPI pin to detect card, GPI means CR_CD# in top design.
+ * INTEN : Enable SD host interrupt.
+ * Bit 16 - Bit 31 : Block count. So, the maximun block count should be 65536.
+ */
+#define VIA_CRDR_SDBLKLEN_GPIDET	0x2000
+#define VIA_CRDR_SDBLKLEN_INTEN		0x8000
+#define VIA_CRDR_MAX_BLOCK_COUNT	65536
+#define VIA_CRDR_MAX_BLOCK_LENGTH	2048
+
+#define VIA_CRDR_SDRESP0	0x10
+#define VIA_CRDR_SDRESP1	0x14
+#define VIA_CRDR_SDRESP2	0x18
+#define VIA_CRDR_SDRESP3	0x1c
+
+#define VIA_CRDR_SDCURBLKCNT	0x20
+
+#define VIA_CRDR_SDINTMASK	0x24
+/*
+ * MBDIE : Multiple Blocks transfer Done Interrupt Enable
+ * BDDIE : Block Data transfer Done Interrupt Enable
+ * CIRIE : Card Insertion or Removal Interrupt Enable
+ * CRDIE : Command-Response transfer Done Interrupt Enable
+ * CRTOIE : Command-Response response TimeOut Interrupt Enable
+ * ASCRDIE : Auto Stop Command-Response transfer Done Interrupt Enable
+ * DTIE : Data access Timeout Interrupt Enable
+ * SCIE : reSponse CRC error Interrupt Enable
+ * RCIE : Read data CRC error Interrupt Enable
+ * WCIE : Write data CRC error Interrupt Enable
+ */
+#define VIA_CRDR_SDINTMASK_MBDIE	0x10
+#define VIA_CRDR_SDINTMASK_BDDIE	0x20
+#define VIA_CRDR_SDINTMASK_CIRIE	0x80
+#define VIA_CRDR_SDINTMASK_CRDIE	0x200
+#define VIA_CRDR_SDINTMASK_CRTOIE	0x400
+#define VIA_CRDR_SDINTMASK_ASCRDIE	0x800
+#define VIA_CRDR_SDINTMASK_DTIE		0x1000
+#define VIA_CRDR_SDINTMASK_SCIE		0x2000
+#define VIA_CRDR_SDINTMASK_RCIE		0x4000
+#define VIA_CRDR_SDINTMASK_WCIE		0x8000
+
+#define VIA_CRDR_SDACTIVE_INTMASK \
+	(VIA_CRDR_SDINTMASK_MBDIE | VIA_CRDR_SDINTMASK_CIRIE \
+	| VIA_CRDR_SDINTMASK_CRDIE | VIA_CRDR_SDINTMASK_CRTOIE \
+	| VIA_CRDR_SDINTMASK_DTIE | VIA_CRDR_SDINTMASK_SCIE \
+	| VIA_CRDR_SDINTMASK_RCIE | VIA_CRDR_SDINTMASK_WCIE)
+
+#define VIA_CRDR_SDSTATUS	0x28
+/*
+ * CECC : Reserved
+ * WP : SD card Write Protect status
+ * SLOTD : Reserved
+ * SLOTG : SD SLOT status(Gpi pin status)
+ * MBD : Multiple Blocks transfer Done interrupt status
+ * BDD : Block Data transfer Done interrupt status
+ * CD : Reserved
+ * CIR : Card Insertion or Removal interrupt detected on GPI pin
+ * IO : Reserved
+ * CRD : Command-Response transfer Done interrupt status
+ * CRTO : Command-Response response TimeOut interrupt status
+ * ASCRDIE : Auto Stop Command-Response transfer Done interrupt status
+ * DT : Data access Timeout interrupt status
+ * SC : reSponse CRC error interrupt status
+ * RC : Read data CRC error interrupt status
+ * WC : Write data CRC error interrupt status
+ */
+#define VIA_CRDR_SDSTS_CECC		0x01
+#define VIA_CRDR_SDSTS_WP		0x02
+#define VIA_CRDR_SDSTS_SLOTD		0x04
+#define VIA_CRDR_SDSTS_SLOTG		0x08
+#define VIA_CRDR_SDSTS_MBD		0x10
+#define VIA_CRDR_SDSTS_BDD		0x20
+#define VIA_CRDR_SDSTS_CD		0x40
+#define VIA_CRDR_SDSTS_CIR		0x80
+#define VIA_CRDR_SDSTS_IO		0x100
+#define VIA_CRDR_SDSTS_CRD		0x200
+#define VIA_CRDR_SDSTS_CRTO		0x400
+#define VIA_CRDR_SDSTS_ASCRDIE		0x800
+#define VIA_CRDR_SDSTS_DT		0x1000
+#define VIA_CRDR_SDSTS_SC		0x2000
+#define VIA_CRDR_SDSTS_RC		0x4000
+#define VIA_CRDR_SDSTS_WC		0x8000
+
+#define VIA_CRDR_SDSTS_IGN_MASK\
+	(VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_IO)
+#define VIA_CRDR_SDSTS_INT_MASK \
+	(VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_CD \
+	| VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_IO | VIA_CRDR_SDSTS_CRD \
+	| VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+	| VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define VIA_CRDR_SDSTS_W1C_MASK \
+	(VIA_CRDR_SDSTS_CECC | VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD \
+	| VIA_CRDR_SDSTS_CD | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_CRD \
+	| VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+	| VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define  VIA_CRDR_SDSTS_CMD_MASK \
+	(VIA_CRDR_SDSTS_CRD | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_SC)
+#define  VIA_CRDR_SDSTS_DATA_MASK\
+	(VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_DT \
+	| VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+
+#define VIA_CRDR_SDSTATUS2	0x2a
+/*
+ * CFE : Enable SD host automatic Clock FReezing
+ */
+#define VIA_CRDR_SDSTS_CFE		0x80
+
+#define VIA_CRDR_SDRSPTMO	0x2C
+
+#define VIA_CRDR_SDCLKSEL	0x30
+
+#define VIA_CRDR_SDEXTCTRL	0x34
+#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SD	0x01
+#define VIS_CRDR_SDEXTCTRL_SHIFT_9	0x02
+#define VIS_CRDR_SDEXTCTRL_MMC_8BIT	0x04
+#define VIS_CRDR_SDEXTCTRL_RELD_BLK	0x08
+#define VIS_CRDR_SDEXTCTRL_BAD_CMDA	0x10
+#define VIS_CRDR_SDEXTCTRL_BAD_DATA	0x20
+#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SPI	0x40
+#define VIA_CRDR_SDEXTCTRL_HISPD	0x80
+/* 0x38-0xFF reserved */
+
+/*
+ * Data DMA Control Registers
+ */
+
+#define VIA_CRDR_DMABASEADD	0x0
+#define VIA_CRDR_DMACOUNTER	0x4
+
+#define VIA_CRDR_DMACTRL	0x8
+/*
+ * DIR :Transaction Direction
+ * 0 : From card to memory
+ * 1 : From memory to card
+ */
+#define VIA_CRDR_DMACTRL_DIR		0x100
+#define VIA_CRDR_DMACTRL_ENIRQ		0x10000
+#define VIA_CRDR_DMACTRL_SFTRST		0x1000000
+
+#define VIA_CRDR_DMASTS		0xc
+
+#define VIA_CRDR_DMASTART	0x10
+/*0x14-0xFF reserved*/
+
+/*
+ * PCI Control Registers
+ */
+
+/*0x0 - 0x1 reserved*/
+#define VIA_CRDR_PCICLKGATT	0x2
+/*
+ * SFTRST :
+ * 0 : Soft reset all the controller and it will be de-asserted automatically
+ * 1 : Soft reset is de-asserted
+ */
+#define VIA_CRDR_PCICLKGATT_SFTRST	0x01
+/*
+ * 3V3 : Pad power select
+ * 0 : 1.8V
+ * 1 : 3.3V
+ * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_3V3	0x10
+/*
+ * PAD_PWRON : Pad Power on/off select
+ * 0 : Power off
+ * 1 : Power on
+  * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_PAD_PWRON	0x20
+
+#define VIA_CRDR_PCISDCCLK	0x5
+
+#define VIA_CRDR_PCIDMACLK	0x7
+#define VIA_CRDR_PCIDMACLK_SDC		0x2
+
+#define VIA_CRDR_PCIINTCTRL	0x8
+#define VIA_CRDR_PCIINTCTRL_SDCIRQEN	0x04
+
+#define VIA_CRDR_PCIINTSTATUS	0x9
+#define VIA_CRDR_PCIINTSTATUS_SDC	0x04
+
+#define  VIA_CRDR_PCITMOCTRL	0xa
+#define VIA_CRDR_PCITMOCTRL_NO		0x0
+#define VIA_CRDR_PCITMOCTRL_32US	0x1
+#define VIA_CRDR_PCITMOCTRL_256US	0x2
+#define VIA_CRDR_PCITMOCTRL_1024US	0x3
+#define VIA_CRDR_PCITMOCTRL_256MS	0x4
+#define VIA_CRDR_PCITMOCTRL_512MS	0x5
+#define VIA_CRDR_PCITMOCTRL_1024MS	0x6
+
+/*0xB-0xFF reserved*/
+
+enum PCI_HOST_CLK_CONTROL {
+	PCI_CLK_375K = 0x03,
+	PCI_CLK_8M = 0x04,
+	PCI_CLK_12M = 0x00,
+	PCI_CLK_16M = 0x05,
+	PCI_CLK_24M = 0x01,
+	PCI_CLK_33M = 0x06,
+	PCI_CLK_48M = 0x02
+};
+
+struct sdhcreg {
+	u32 sdcontrol_reg;
+	u32 sdcmdarg_reg;
+	u32 sdbusmode_reg;
+	u32 sdblklen_reg;
+	u32 sdresp_reg[4];
+	u32 sdcurblkcnt_reg;
+	u32 sdintmask_reg;
+	u32 sdstatus_reg;
+	u32 sdrsptmo_reg;
+	u32 sdclksel_reg;
+	u32 sdextctrl_reg;
+};
+
+struct pcictrlreg {
+	u8 reserve[2];
+	u8 pciclkgat_reg;
+	u8 pcinfcclk_reg;
+	u8 pcimscclk_reg;
+	u8 pcisdclk_reg;
+	u8 pcicaclk_reg;
+	u8 pcidmaclk_reg;
+	u8 pciintctrl_reg;
+	u8 pciintstatus_reg;
+	u8 pcitmoctrl_reg;
+	u8 Resv;
+};
+
+struct via_crdr_mmc_host {
+	struct mmc_host *mmc;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+
+	void __iomem *mmiobase;
+	void __iomem *sdhc_mmiobase;
+	void __iomem *ddma_mmiobase;
+	void __iomem *pcictrl_mmiobase;
+
+	struct pcictrlreg pm_pcictrl_reg;
+	struct sdhcreg pm_sdhc_reg;
+
+	struct work_struct carddet_work;
+	struct tasklet_struct finish_tasklet;
+
+	struct timer_list timer;
+	spinlock_t lock;
+	u8 power;
+	int reject;
+	unsigned int quirks;
+};
+
+/* some devices need a very long delay for power to stabilize */
+#define VIA_CRDR_QUIRK_300MS_PWRDELAY	0x0001
+
+static struct pci_device_id via_ids[] = {
+	{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, via_ids);
+
+static void via_print_sdchc(struct via_crdr_mmc_host *host)
+{
+	void __iomem *addrbase = host->sdhc_mmiobase;
+
+	pr_debug("SDC MMIO Registers:\n");
+	pr_debug("SDCONTROL=%08x, SDCMDARG=%08x, SDBUSMODE=%08x\n",
+		 readl(addrbase + VIA_CRDR_SDCTRL),
+		 readl(addrbase + VIA_CRDR_SDCARG),
+		 readl(addrbase + VIA_CRDR_SDBUSMODE));
+	pr_debug("SDBLKLEN=%08x, SDCURBLKCNT=%08x, SDINTMASK=%08x\n",
+		 readl(addrbase + VIA_CRDR_SDBLKLEN),
+		 readl(addrbase + VIA_CRDR_SDCURBLKCNT),
+		 readl(addrbase + VIA_CRDR_SDINTMASK));
+	pr_debug("SDSTATUS=%08x, SDCLKSEL=%08x, SDEXTCTRL=%08x\n",
+		 readl(addrbase + VIA_CRDR_SDSTATUS),
+		 readl(addrbase + VIA_CRDR_SDCLKSEL),
+		 readl(addrbase + VIA_CRDR_SDEXTCTRL));
+}
+
+static void via_print_pcictrl(struct via_crdr_mmc_host *host)
+{
+	void __iomem *addrbase = host->pcictrl_mmiobase;
+
+	pr_debug("PCI Control Registers:\n");
+	pr_debug("PCICLKGATT=%02x, PCISDCCLK=%02x, PCIDMACLK=%02x\n",
+		 readb(addrbase + VIA_CRDR_PCICLKGATT),
+		 readb(addrbase + VIA_CRDR_PCISDCCLK),
+		 readb(addrbase + VIA_CRDR_PCIDMACLK));
+	pr_debug("PCIINTCTRL=%02x, PCIINTSTATUS=%02x\n",
+		 readb(addrbase + VIA_CRDR_PCIINTCTRL),
+		 readb(addrbase + VIA_CRDR_PCIINTSTATUS));
+}
+
+static void via_save_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+	struct pcictrlreg *pm_pcictrl_reg;
+	void __iomem *addrbase;
+
+	pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+	addrbase = host->pcictrl_mmiobase;
+
+	pm_pcictrl_reg->pciclkgat_reg = readb(addrbase + VIA_CRDR_PCICLKGATT);
+	pm_pcictrl_reg->pciclkgat_reg |=
+		VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	pm_pcictrl_reg->pcisdclk_reg = readb(addrbase + VIA_CRDR_PCISDCCLK);
+	pm_pcictrl_reg->pcidmaclk_reg = readb(addrbase + VIA_CRDR_PCIDMACLK);
+	pm_pcictrl_reg->pciintctrl_reg = readb(addrbase + VIA_CRDR_PCIINTCTRL);
+	pm_pcictrl_reg->pciintstatus_reg =
+		readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+	pm_pcictrl_reg->pcitmoctrl_reg = readb(addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_restore_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+	struct pcictrlreg *pm_pcictrl_reg;
+	void __iomem *addrbase;
+
+	pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+	addrbase = host->pcictrl_mmiobase;
+
+	writeb(pm_pcictrl_reg->pciclkgat_reg, addrbase + VIA_CRDR_PCICLKGATT);
+	writeb(pm_pcictrl_reg->pcisdclk_reg, addrbase + VIA_CRDR_PCISDCCLK);
+	writeb(pm_pcictrl_reg->pcidmaclk_reg, addrbase + VIA_CRDR_PCIDMACLK);
+	writeb(pm_pcictrl_reg->pciintctrl_reg, addrbase + VIA_CRDR_PCIINTCTRL);
+	writeb(pm_pcictrl_reg->pciintstatus_reg,
+		addrbase + VIA_CRDR_PCIINTSTATUS);
+	writeb(pm_pcictrl_reg->pcitmoctrl_reg, addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_save_sdcreg(struct via_crdr_mmc_host *host)
+{
+	struct sdhcreg *pm_sdhc_reg;
+	void __iomem *addrbase;
+
+	pm_sdhc_reg = &(host->pm_sdhc_reg);
+	addrbase = host->sdhc_mmiobase;
+
+	pm_sdhc_reg->sdcontrol_reg = readl(addrbase + VIA_CRDR_SDCTRL);
+	pm_sdhc_reg->sdcmdarg_reg = readl(addrbase + VIA_CRDR_SDCARG);
+	pm_sdhc_reg->sdbusmode_reg = readl(addrbase + VIA_CRDR_SDBUSMODE);
+	pm_sdhc_reg->sdblklen_reg = readl(addrbase + VIA_CRDR_SDBLKLEN);
+	pm_sdhc_reg->sdcurblkcnt_reg = readl(addrbase + VIA_CRDR_SDCURBLKCNT);
+	pm_sdhc_reg->sdintmask_reg = readl(addrbase + VIA_CRDR_SDINTMASK);
+	pm_sdhc_reg->sdstatus_reg = readl(addrbase + VIA_CRDR_SDSTATUS);
+	pm_sdhc_reg->sdrsptmo_reg = readl(addrbase + VIA_CRDR_SDRSPTMO);
+	pm_sdhc_reg->sdclksel_reg = readl(addrbase + VIA_CRDR_SDCLKSEL);
+	pm_sdhc_reg->sdextctrl_reg = readl(addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_restore_sdcreg(struct via_crdr_mmc_host *host)
+{
+	struct sdhcreg *pm_sdhc_reg;
+	void __iomem *addrbase;
+
+	pm_sdhc_reg = &(host->pm_sdhc_reg);
+	addrbase = host->sdhc_mmiobase;
+
+	writel(pm_sdhc_reg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+	writel(pm_sdhc_reg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+	writel(pm_sdhc_reg->sdbusmode_reg, addrbase + VIA_CRDR_SDBUSMODE);
+	writel(pm_sdhc_reg->sdblklen_reg, addrbase + VIA_CRDR_SDBLKLEN);
+	writel(pm_sdhc_reg->sdcurblkcnt_reg, addrbase + VIA_CRDR_SDCURBLKCNT);
+	writel(pm_sdhc_reg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+	writel(pm_sdhc_reg->sdstatus_reg, addrbase + VIA_CRDR_SDSTATUS);
+	writel(pm_sdhc_reg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+	writel(pm_sdhc_reg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+	writel(pm_sdhc_reg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_pwron_sleep(struct via_crdr_mmc_host *sdhost)
+{
+	if (sdhost->quirks & VIA_CRDR_QUIRK_300MS_PWRDELAY)
+		msleep(300);
+	else
+		msleep(3);
+}
+
+static void via_set_ddma(struct via_crdr_mmc_host *host,
+			 dma_addr_t dmaaddr, u32 count, int dir, int enirq)
+{
+	void __iomem *addrbase;
+	u32 ctrl_data = 0;
+
+	if (enirq)
+		ctrl_data |= VIA_CRDR_DMACTRL_ENIRQ;
+
+	if (dir)
+		ctrl_data |= VIA_CRDR_DMACTRL_DIR;
+
+	addrbase = host->ddma_mmiobase;
+
+	writel(dmaaddr, addrbase + VIA_CRDR_DMABASEADD);
+	writel(count, addrbase + VIA_CRDR_DMACOUNTER);
+	writel(ctrl_data, addrbase + VIA_CRDR_DMACTRL);
+	writel(0x01, addrbase + VIA_CRDR_DMASTART);
+
+	/* It seems that our DMA can not work normally with 375kHz clock */
+	/* FIXME: don't brute-force 8MHz but use PIO at 375kHz !! */
+	addrbase = host->pcictrl_mmiobase;
+	if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K) {
+		dev_info(host->mmc->parent, "forcing card speed to 8MHz\n");
+		writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK);
+	}
+}
+
+static void via_sdc_preparedata(struct via_crdr_mmc_host *host,
+				struct mmc_data *data)
+{
+	void __iomem *addrbase;
+	u32 blk_reg;
+	int count;
+
+	WARN_ON(host->data);
+
+	/* Sanity checks */
+	BUG_ON(data->blksz > host->mmc->max_blk_size);
+	BUG_ON(data->blocks > host->mmc->max_blk_count);
+
+	host->data = data;
+
+	count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		((data->flags & MMC_DATA_READ) ?
+		PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+	BUG_ON(count != 1);
+
+	via_set_ddma(host, sg_dma_address(data->sg), sg_dma_len(data->sg),
+		(data->flags & MMC_DATA_WRITE) ? 1 : 0, 1);
+
+	addrbase = host->sdhc_mmiobase;
+
+	blk_reg = data->blksz - 1;
+	blk_reg |= VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+	blk_reg |= (data->blocks) << 16;
+
+	writel(blk_reg, addrbase + VIA_CRDR_SDBLKLEN);
+}
+
+static void via_sdc_get_response(struct via_crdr_mmc_host *host,
+				 struct mmc_command *cmd)
+{
+	void __iomem *addrbase = host->sdhc_mmiobase;
+	u32 dwdata0 = readl(addrbase + VIA_CRDR_SDRESP0);
+	u32 dwdata1 = readl(addrbase + VIA_CRDR_SDRESP1);
+	u32 dwdata2 = readl(addrbase + VIA_CRDR_SDRESP2);
+	u32 dwdata3 = readl(addrbase + VIA_CRDR_SDRESP3);
+
+	if (cmd->flags & MMC_RSP_136) {
+		cmd->resp[0] = ((u8) (dwdata1)) |
+		    (((u8) (dwdata0 >> 24)) << 8) |
+		    (((u8) (dwdata0 >> 16)) << 16) |
+		    (((u8) (dwdata0 >> 8)) << 24);
+
+		cmd->resp[1] = ((u8) (dwdata2)) |
+		    (((u8) (dwdata1 >> 24)) << 8) |
+		    (((u8) (dwdata1 >> 16)) << 16) |
+		    (((u8) (dwdata1 >> 8)) << 24);
+
+		cmd->resp[2] = ((u8) (dwdata3)) |
+		    (((u8) (dwdata2 >> 24)) << 8) |
+		    (((u8) (dwdata2 >> 16)) << 16) |
+		    (((u8) (dwdata2 >> 8)) << 24);
+
+		cmd->resp[3] = 0xff |
+		    ((((u8) (dwdata3 >> 24))) << 8) |
+		    (((u8) (dwdata3 >> 16)) << 16) |
+		    (((u8) (dwdata3 >> 8)) << 24);
+	} else {
+		dwdata0 >>= 8;
+		cmd->resp[0] = ((dwdata0 & 0xff) << 24) |
+		    (((dwdata0 >> 8) & 0xff) << 16) |
+		    (((dwdata0 >> 16) & 0xff) << 8) | (dwdata1 & 0xff);
+
+		dwdata1 >>= 8;
+		cmd->resp[1] = ((dwdata1 & 0xff) << 24) |
+		    (((dwdata1 >> 8) & 0xff) << 16) |
+		    (((dwdata1 >> 16) & 0xff) << 8);
+	}
+}
+
+static void via_sdc_send_command(struct via_crdr_mmc_host *host,
+				 struct mmc_command *cmd)
+{
+	void __iomem *addrbase;
+	struct mmc_data *data;
+	u32 cmdctrl = 0;
+
+	WARN_ON(host->cmd);
+
+	data = cmd->data;
+	mod_timer(&host->timer, jiffies + HZ);
+	host->cmd = cmd;
+
+	/*Command index*/
+	cmdctrl = cmd->opcode << 8;
+
+	/*Response type*/
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_NONE;
+		break;
+	case MMC_RSP_R1:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1;
+		break;
+	case MMC_RSP_R1B:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1B;
+		break;
+	case MMC_RSP_R2:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R2;
+		break;
+	case MMC_RSP_R3:
+		cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3;
+		break;
+	default:
+		pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc));
+		break;
+	}
+
+	if (!(cmd->data))
+		goto nodata;
+
+	via_sdc_preparedata(host, data);
+
+	/*Command control*/
+	if (data->blocks > 1) {
+		if (data->flags & MMC_DATA_WRITE) {
+			cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+			cmdctrl |= VIA_CRDR_SDCTRL_MULTI_WR;
+		} else {
+			cmdctrl |= VIA_CRDR_SDCTRL_MULTI_RD;
+		}
+	} else {
+		if (data->flags & MMC_DATA_WRITE) {
+			cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+			cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_WR;
+		} else {
+			cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_RD;
+		}
+	}
+
+nodata:
+	if (cmd == host->mrq->stop)
+		cmdctrl |= VIA_CRDR_SDCTRL_STOP;
+
+	cmdctrl |= VIA_CRDR_SDCTRL_START;
+
+	addrbase = host->sdhc_mmiobase;
+	writel(cmd->arg, addrbase + VIA_CRDR_SDCARG);
+	writel(cmdctrl, addrbase + VIA_CRDR_SDCTRL);
+}
+
+static void via_sdc_finish_data(struct via_crdr_mmc_host *host)
+{
+	struct mmc_data *data;
+
+	BUG_ON(!host->data);
+
+	data = host->data;
+	host->data = NULL;
+
+	if (data->error)
+		data->bytes_xfered = 0;
+	else
+		data->bytes_xfered = data->blocks * data->blksz;
+
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		((data->flags & MMC_DATA_READ) ?
+		PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+
+	if (data->stop)
+		via_sdc_send_command(host, data->stop);
+	else
+		tasklet_schedule(&host->finish_tasklet);
+}
+
+static void via_sdc_finish_command(struct via_crdr_mmc_host *host)
+{
+	via_sdc_get_response(host, host->cmd);
+
+	host->cmd->error = 0;
+
+	if (!host->cmd->data)
+		tasklet_schedule(&host->finish_tasklet);
+
+	host->cmd = NULL;
+}
+
+static void via_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	void __iomem *addrbase;
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	u16 status;
+
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	addrbase = host->pcictrl_mmiobase;
+	writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+	status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+	status &= VIA_CRDR_SDSTS_W1C_MASK;
+	writew(status, host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+	WARN_ON(host->mrq != NULL);
+	host->mrq = mrq;
+
+	status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+	if (!(status & VIA_CRDR_SDSTS_SLOTG) || host->reject) {
+		host->mrq->cmd->error = -ENOMEDIUM;
+		tasklet_schedule(&host->finish_tasklet);
+	} else {
+		via_sdc_send_command(host, mrq->cmd);
+	}
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_set_power(struct via_crdr_mmc_host *host,
+			      unsigned short power, unsigned int on)
+{
+	unsigned long flags;
+	u8 gatt;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->power = (1 << power);
+
+	gatt = readb(host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	if (host->power == MMC_VDD_165_195)
+		gatt &= ~VIA_CRDR_PCICLKGATT_3V3;
+	else
+		gatt |= VIA_CRDR_PCICLKGATT_3V3;
+	if (on)
+		gatt |= VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	else
+		gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	via_pwron_sleep(host);
+}
+
+static void via_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	void __iomem *addrbase;
+	u32 org_data, sdextctrl;
+	u8 clock;
+
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	addrbase = host->sdhc_mmiobase;
+	org_data = readl(addrbase + VIA_CRDR_SDBUSMODE);
+	sdextctrl = readl(addrbase + VIA_CRDR_SDEXTCTRL);
+
+	if (ios->bus_width == MMC_BUS_WIDTH_1)
+		org_data &= ~VIA_CRDR_SDMODE_4BIT;
+	else
+		org_data |= VIA_CRDR_SDMODE_4BIT;
+
+	if (ios->power_mode == MMC_POWER_OFF)
+		org_data &= ~VIA_CRDR_SDMODE_CLK_ON;
+	else
+		org_data |= VIA_CRDR_SDMODE_CLK_ON;
+
+	if (ios->timing == MMC_TIMING_SD_HS)
+		sdextctrl |= VIA_CRDR_SDEXTCTRL_HISPD;
+	else
+		sdextctrl &= ~VIA_CRDR_SDEXTCTRL_HISPD;
+
+	writel(org_data, addrbase + VIA_CRDR_SDBUSMODE);
+	writel(sdextctrl, addrbase + VIA_CRDR_SDEXTCTRL);
+
+	if (ios->clock >= 48000000)
+		clock = PCI_CLK_48M;
+	else if (ios->clock >= 33000000)
+		clock = PCI_CLK_33M;
+	else if (ios->clock >= 24000000)
+		clock = PCI_CLK_24M;
+	else if (ios->clock >= 16000000)
+		clock = PCI_CLK_16M;
+	else if (ios->clock >= 12000000)
+		clock = PCI_CLK_12M;
+	else if (ios->clock >=  8000000)
+		clock = PCI_CLK_8M;
+	else
+		clock = PCI_CLK_375K;
+
+	addrbase = host->pcictrl_mmiobase;
+	if (readb(addrbase + VIA_CRDR_PCISDCCLK) != clock)
+		writeb(clock, addrbase + VIA_CRDR_PCISDCCLK);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (ios->power_mode != MMC_POWER_OFF)
+		via_sdc_set_power(host, ios->vdd, 1);
+	else
+		via_sdc_set_power(host, ios->vdd, 0);
+}
+
+static int via_sdc_get_ro(struct mmc_host *mmc)
+{
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	u16 status;
+
+	host = mmc_priv(mmc);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return !(status & VIA_CRDR_SDSTS_WP);
+}
+
+static const struct mmc_host_ops via_sdc_ops = {
+	.request = via_sdc_request,
+	.set_ios = via_sdc_set_ios,
+	.get_ro = via_sdc_get_ro,
+};
+
+static void via_reset_pcictrl(struct via_crdr_mmc_host *host)
+{
+	void __iomem *addrbase;
+	unsigned long flags;
+	u8 gatt;
+
+	addrbase = host->pcictrl_mmiobase;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	via_save_pcictrlreg(host);
+	via_save_sdcreg(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	if (host->power == MMC_VDD_165_195)
+		gatt &= VIA_CRDR_PCICLKGATT_3V3;
+	else
+		gatt |= VIA_CRDR_PCICLKGATT_3V3;
+	writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	via_pwron_sleep(host);
+	gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+	writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	msleep(3);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	via_restore_pcictrlreg(host);
+	via_restore_sdcreg(host);
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+	BUG_ON(intmask == 0);
+
+	if (!host->cmd) {
+		pr_err("%s: Got command interrupt 0x%x even "
+		       "though no command operation was in progress.\n",
+		       mmc_hostname(host->mmc), intmask);
+		return;
+	}
+
+	if (intmask & VIA_CRDR_SDSTS_CRTO)
+		host->cmd->error = -ETIMEDOUT;
+	else if (intmask & VIA_CRDR_SDSTS_SC)
+		host->cmd->error = -EILSEQ;
+
+	if (host->cmd->error)
+		tasklet_schedule(&host->finish_tasklet);
+	else if (intmask & VIA_CRDR_SDSTS_CRD)
+		via_sdc_finish_command(host);
+}
+
+static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+	BUG_ON(intmask == 0);
+
+	if (intmask & VIA_CRDR_SDSTS_DT)
+		host->data->error = -ETIMEDOUT;
+	else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
+		host->data->error = -EILSEQ;
+
+	via_sdc_finish_data(host);
+}
+
+static irqreturn_t via_sdc_isr(int irq, void *dev_id)
+{
+	struct via_crdr_mmc_host *sdhost = dev_id;
+	void __iomem *addrbase;
+	u8 pci_status;
+	u16 sd_status;
+	irqreturn_t result;
+
+	if (!sdhost)
+		return IRQ_NONE;
+
+	spin_lock(&sdhost->lock);
+
+	addrbase = sdhost->pcictrl_mmiobase;
+	pci_status = readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+	if (!(pci_status & VIA_CRDR_PCIINTSTATUS_SDC)) {
+		result = IRQ_NONE;
+		goto out;
+	}
+
+	addrbase = sdhost->sdhc_mmiobase;
+	sd_status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	sd_status &= VIA_CRDR_SDSTS_INT_MASK;
+	sd_status &= ~VIA_CRDR_SDSTS_IGN_MASK;
+	if (!sd_status) {
+		result = IRQ_NONE;
+		goto out;
+	}
+
+	if (sd_status & VIA_CRDR_SDSTS_CIR) {
+		writew(sd_status & VIA_CRDR_SDSTS_CIR,
+			addrbase + VIA_CRDR_SDSTATUS);
+
+		schedule_work(&sdhost->carddet_work);
+	}
+
+	sd_status &= ~VIA_CRDR_SDSTS_CIR;
+	if (sd_status & VIA_CRDR_SDSTS_CMD_MASK) {
+		writew(sd_status & VIA_CRDR_SDSTS_CMD_MASK,
+			addrbase + VIA_CRDR_SDSTATUS);
+		via_sdc_cmd_isr(sdhost, sd_status & VIA_CRDR_SDSTS_CMD_MASK);
+	}
+	if (sd_status & VIA_CRDR_SDSTS_DATA_MASK) {
+		writew(sd_status & VIA_CRDR_SDSTS_DATA_MASK,
+			addrbase + VIA_CRDR_SDSTATUS);
+		via_sdc_data_isr(sdhost, sd_status & VIA_CRDR_SDSTS_DATA_MASK);
+	}
+
+	sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK);
+	if (sd_status) {
+		pr_err("%s: Unexpected interrupt 0x%x\n",
+		       mmc_hostname(sdhost->mmc), sd_status);
+		writew(sd_status, addrbase + VIA_CRDR_SDSTATUS);
+	}
+
+	result = IRQ_HANDLED;
+
+	mmiowb();
+out:
+	spin_unlock(&sdhost->lock);
+
+	return result;
+}
+
+static void via_sdc_timeout(unsigned long ulongdata)
+{
+	struct via_crdr_mmc_host *sdhost;
+	unsigned long flags;
+
+	sdhost = (struct via_crdr_mmc_host *)ulongdata;
+
+	spin_lock_irqsave(&sdhost->lock, flags);
+
+	if (sdhost->mrq) {
+		pr_err("%s: Timeout waiting for hardware interrupt."
+		       "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
+		       sdhost->mrq->cmd->opcode);
+
+		if (sdhost->data) {
+			writel(VIA_CRDR_DMACTRL_SFTRST,
+				sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL);
+			sdhost->data->error = -ETIMEDOUT;
+			via_sdc_finish_data(sdhost);
+		} else {
+			if (sdhost->cmd)
+				sdhost->cmd->error = -ETIMEDOUT;
+			else
+				sdhost->mrq->cmd->error = -ETIMEDOUT;
+			tasklet_schedule(&sdhost->finish_tasklet);
+		}
+	}
+
+	mmiowb();
+	spin_unlock_irqrestore(&sdhost->lock, flags);
+}
+
+static void via_sdc_tasklet_finish(unsigned long param)
+{
+	struct via_crdr_mmc_host *host;
+	unsigned long flags;
+	struct mmc_request *mrq;
+
+	host = (struct via_crdr_mmc_host *)param;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	del_timer(&host->timer);
+	mrq = host->mrq;
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+static void via_sdc_card_detect(struct work_struct *work)
+{
+	struct via_crdr_mmc_host *host;
+	void __iomem *addrbase;
+	unsigned long flags;
+	u16 status;
+
+	host = container_of(work, struct via_crdr_mmc_host, carddet_work);
+
+	addrbase = host->ddma_mmiobase;
+	writel(VIA_CRDR_DMACTRL_SFTRST, addrbase + VIA_CRDR_DMACTRL);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	addrbase = host->pcictrl_mmiobase;
+	writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+	addrbase = host->sdhc_mmiobase;
+	status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
+		if (host->mrq) {
+			pr_err("%s: Card removed during transfer!\n",
+			       mmc_hostname(host->mmc));
+			host->mrq->cmd->error = -ENOMEDIUM;
+			tasklet_schedule(&host->finish_tasklet);
+		}
+
+		mmiowb();
+		spin_unlock_irqrestore(&host->lock, flags);
+
+		via_reset_pcictrl(host);
+
+		spin_lock_irqsave(&host->lock, flags);
+	}
+
+	mmiowb();
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	via_print_pcictrl(host);
+	via_print_sdchc(host);
+
+	mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+}
+
+static void via_init_mmc_host(struct via_crdr_mmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	void __iomem *addrbase;
+	u32 lenreg;
+	u32 status;
+
+	init_timer(&host->timer);
+	host->timer.data = (unsigned long)host;
+	host->timer.function = via_sdc_timeout;
+
+	spin_lock_init(&host->lock);
+
+	mmc->f_min = VIA_CRDR_MIN_CLOCK;
+	mmc->f_max = VIA_CRDR_MAX_CLOCK;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED;
+	mmc->ops = &via_sdc_ops;
+
+	/*Hardware cannot do scatter lists*/
+	mmc->max_hw_segs = 1;
+	mmc->max_phys_segs = 1;
+
+	mmc->max_blk_size = VIA_CRDR_MAX_BLOCK_LENGTH;
+	mmc->max_blk_count = VIA_CRDR_MAX_BLOCK_COUNT;
+
+	mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_req_size = mmc->max_seg_size;
+
+	INIT_WORK(&host->carddet_work, via_sdc_card_detect);
+
+	tasklet_init(&host->finish_tasklet, via_sdc_tasklet_finish,
+		     (unsigned long)host);
+
+	addrbase = host->sdhc_mmiobase;
+	writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+	msleep(1);
+
+	lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+	writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	status &= VIA_CRDR_SDSTS_W1C_MASK;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+	status |= VIA_CRDR_SDSTS_CFE;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+	writeb(0x0, addrbase + VIA_CRDR_SDEXTCTRL);
+
+	writel(VIA_CRDR_SDACTIVE_INTMASK, addrbase + VIA_CRDR_SDINTMASK);
+	msleep(1);
+}
+
+static int __devinit via_sd_probe(struct pci_dev *pcidev,
+				    const struct pci_device_id *id)
+{
+	struct mmc_host *mmc;
+	struct via_crdr_mmc_host *sdhost;
+	u32 base, len;
+	u8 rev, gatt;
+	int ret;
+
+	pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev);
+	pr_info(DRV_NAME
+		": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
+		(int)rev);
+
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pcidev, DRV_NAME);
+	if (ret)
+		goto disable;
+
+	pci_write_config_byte(pcidev, VIA_CRDR_PCI_WORK_MODE, 0);
+	pci_write_config_byte(pcidev, VIA_CRDR_PCI_DBG_MODE, 0);
+
+	mmc = mmc_alloc_host(sizeof(struct via_crdr_mmc_host), &pcidev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	sdhost = mmc_priv(mmc);
+	sdhost->mmc = mmc;
+	dev_set_drvdata(&pcidev->dev, sdhost);
+
+	len = pci_resource_len(pcidev, 0);
+	base = pci_resource_start(pcidev, 0);
+	sdhost->mmiobase = ioremap_nocache(base, len);
+	if (!sdhost->mmiobase) {
+		ret = -ENOMEM;
+		goto free_mmc_host;
+	}
+
+	sdhost->sdhc_mmiobase =
+		sdhost->mmiobase + VIA_CRDR_SDC_OFF;
+	sdhost->ddma_mmiobase =
+		sdhost->mmiobase + VIA_CRDR_DDMA_OFF;
+	sdhost->pcictrl_mmiobase =
+		sdhost->mmiobase + VIA_CRDR_PCICTRL_OFF;
+
+	sdhost->power = MMC_VDD_165_195;
+
+	gatt = VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	via_pwron_sleep(sdhost);
+	gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	msleep(3);
+
+	via_init_mmc_host(sdhost);
+
+	ret =
+	    request_irq(pcidev->irq, via_sdc_isr, IRQF_SHARED, DRV_NAME,
+			sdhost);
+	if (ret)
+		goto unmap;
+
+	writeb(VIA_CRDR_PCIINTCTRL_SDCIRQEN,
+	       sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+	writeb(VIA_CRDR_PCITMOCTRL_1024MS,
+	       sdhost->pcictrl_mmiobase + VIA_CRDR_PCITMOCTRL);
+
+	/* device-specific quirks */
+	if (pcidev->subsystem_vendor == PCI_VENDOR_ID_LENOVO &&
+	    pcidev->subsystem_device == 0x3891)
+		sdhost->quirks = VIA_CRDR_QUIRK_300MS_PWRDELAY;
+
+	mmc_add_host(mmc);
+
+	return 0;
+
+unmap:
+	iounmap(sdhost->mmiobase);
+free_mmc_host:
+	dev_set_drvdata(&pcidev->dev, NULL);
+	mmc_free_host(mmc);
+release:
+	pci_release_regions(pcidev);
+disable:
+	pci_disable_device(pcidev);
+
+	return ret;
+}
+
+static void __devexit via_sd_remove(struct pci_dev *pcidev)
+{
+	struct via_crdr_mmc_host *sdhost = pci_get_drvdata(pcidev);
+	unsigned long flags;
+	u8 gatt;
+
+	spin_lock_irqsave(&sdhost->lock, flags);
+
+	/* Ensure we don't accept more commands from mmc layer */
+	sdhost->reject = 1;
+
+	/* Disable generating further interrupts */
+	writeb(0x0, sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+	mmiowb();
+
+	if (sdhost->mrq) {
+		printk(KERN_ERR "%s: Controller removed during "
+			"transfer\n", mmc_hostname(sdhost->mmc));
+
+		/* make sure all DMA is stopped */
+		writel(VIA_CRDR_DMACTRL_SFTRST,
+			sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL);
+		mmiowb();
+		sdhost->mrq->cmd->error = -ENOMEDIUM;
+		if (sdhost->mrq->stop)
+			sdhost->mrq->stop->error = -ENOMEDIUM;
+		tasklet_schedule(&sdhost->finish_tasklet);
+	}
+	spin_unlock_irqrestore(&sdhost->lock, flags);
+
+	mmc_remove_host(sdhost->mmc);
+
+	free_irq(pcidev->irq, sdhost);
+
+	del_timer_sync(&sdhost->timer);
+
+	tasklet_kill(&sdhost->finish_tasklet);
+
+	/* switch off power */
+	gatt = readb(sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+	iounmap(sdhost->mmiobase);
+	dev_set_drvdata(&pcidev->dev, NULL);
+	mmc_free_host(sdhost->mmc);
+	pci_release_regions(pcidev);
+	pci_disable_device(pcidev);
+
+	pr_info(DRV_NAME
+		": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
+		pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
+}
+
+#ifdef CONFIG_PM
+
+static void via_init_sdc_pm(struct via_crdr_mmc_host *host)
+{
+	struct sdhcreg *pm_sdhcreg;
+	void __iomem *addrbase;
+	u32 lenreg;
+	u16 status;
+
+	pm_sdhcreg = &(host->pm_sdhc_reg);
+	addrbase = host->sdhc_mmiobase;
+
+	writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+
+	lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+	writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS);
+	status &= VIA_CRDR_SDSTS_W1C_MASK;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+	status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+	status |= VIA_CRDR_SDSTS_CFE;
+	writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+	writel(pm_sdhcreg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+	writel(pm_sdhcreg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+	writel(pm_sdhcreg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+	writel(pm_sdhcreg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+	writel(pm_sdhcreg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+	writel(pm_sdhcreg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+
+	via_print_pcictrl(host);
+	via_print_sdchc(host);
+}
+
+static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state)
+{
+	struct via_crdr_mmc_host *host;
+	int ret = 0;
+
+	host = pci_get_drvdata(pcidev);
+
+	via_save_pcictrlreg(host);
+	via_save_sdcreg(host);
+
+	ret = mmc_suspend_host(host->mmc, state);
+
+	pci_save_state(pcidev);
+	pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
+	pci_disable_device(pcidev);
+	pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+
+	return ret;
+}
+
+static int via_sd_resume(struct pci_dev *pcidev)
+{
+	struct via_crdr_mmc_host *sdhost;
+	int ret = 0;
+	u8 gatt;
+
+	sdhost = pci_get_drvdata(pcidev);
+
+	gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON;
+	if (sdhost->power == MMC_VDD_165_195)
+		gatt &= ~VIA_CRDR_PCICLKGATT_3V3;
+	else
+		gatt |= VIA_CRDR_PCICLKGATT_3V3;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	via_pwron_sleep(sdhost);
+	gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+	writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+	msleep(3);
+
+	msleep(100);
+
+	pci_set_power_state(pcidev, PCI_D0);
+	pci_restore_state(pcidev);
+	ret = pci_enable_device(pcidev);
+	if (ret)
+		return ret;
+
+	via_restore_pcictrlreg(sdhost);
+	via_init_sdc_pm(sdhost);
+
+	ret = mmc_resume_host(sdhost->mmc);
+
+	return ret;
+}
+
+#else /* CONFIG_PM */
+
+#define via_sd_suspend NULL
+#define via_sd_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver via_sd_driver = {
+	.name = DRV_NAME,
+	.id_table = via_ids,
+	.probe = via_sd_probe,
+	.remove = __devexit_p(via_sd_remove),
+	.suspend = via_sd_suspend,
+	.resume = via_sd_resume,
+};
+
+static int __init via_sd_drv_init(void)
+{
+	pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
+		"(C) 2008 VIA Technologies, Inc.\n");
+
+	return pci_register_driver(&via_sd_driver);
+}
+
+static void __exit via_sd_drv_exit(void)
+{
+	pci_unregister_driver(&via_sd_driver);
+}
+
+module_init(via_sd_drv_init);
+module_exit(via_sd_drv_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("VIA Technologies Inc.");
+MODULE_DESCRIPTION("VIA SD/MMC Card Interface driver");