aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-06-20 14:50:31 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-06-20 14:50:31 -0700
commitbe967b7e2f7747a5ebf2a07ee627d9338491e784 (patch)
treef42b82601209a52b8ee478e36d8b21543ab03060 /drivers
parenteef11427edcb821b63920219f89379fab84198b9 (diff)
parent7bc3312bef4d6f220812500c0de7868fb7625a41 (diff)
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (199 commits) [MTD] NAND: Fix breakage all over the place [PATCH] NAND: fix remaining OOB length calculation [MTD] NAND Fixup NDFC merge brokeness [MTD NAND] S3C2410 driver cleanup [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation. [JFFS2] Check CRC32 on dirent and data nodes each time they're read [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space [JFFS2] Mark XATTR support as experimental, for now [JFFS2] Don't trust node headers before the CRC is checked. [MTD] Restore MTD_ROM and MTD_RAM types [MTD] assume mtd->writesize is 1 for NOR flashes [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles [MTD] Prepare physmap for 64-bit-resources [JFFS2] Fix more breakage caused by janitorial meddling. [JFFS2] Remove stray __exit from jffs2_compressors_exit() [MTD] Allow alternate JFFS2 mount variant for root filesystem. [MTD] Disconnect struct mtd_info from ABI [MTD] replace MTD_RAM with MTD_GENERIC_TYPE [MTD] replace MTD_ROM with MTD_GENERIC_TYPE [MTD] remove a forgotten MTD_XIP ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/Kconfig4
-rw-r--r--drivers/mtd/chips/Kconfig1
-rw-r--r--drivers/mtd/chips/Makefile7
-rw-r--r--drivers/mtd/chips/amd_flash.c8
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c474
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c22
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0020.c22
-rw-r--r--drivers/mtd/chips/cfi_probe.c8
-rw-r--r--drivers/mtd/chips/gen_probe.c45
-rw-r--r--drivers/mtd/chips/map_ram.c2
-rw-r--r--drivers/mtd/chips/map_rom.c4
-rw-r--r--drivers/mtd/chips/sharp.c1
-rw-r--r--drivers/mtd/devices/Kconfig6
-rw-r--r--drivers/mtd/devices/Makefile7
-rw-r--r--drivers/mtd/devices/block2mtd.c27
-rw-r--r--drivers/mtd/devices/doc2000.c129
-rw-r--r--drivers/mtd/devices/doc2001.c60
-rw-r--r--drivers/mtd/devices/doc2001plus.c60
-rw-r--r--drivers/mtd/devices/docprobe.c26
-rw-r--r--drivers/mtd/devices/lart.c1
-rw-r--r--drivers/mtd/devices/m25p80.c1
-rw-r--r--drivers/mtd/devices/ms02-nv.c2
-rw-r--r--drivers/mtd/devices/mtdram.c1
-rw-r--r--drivers/mtd/devices/phram.c16
-rw-r--r--drivers/mtd/devices/slram.c3
-rw-r--r--drivers/mtd/inftlcore.c192
-rw-r--r--drivers/mtd/inftlmount.c60
-rw-r--r--drivers/mtd/maps/Kconfig11
-rw-r--r--drivers/mtd/maps/cfi_flagadm.c4
-rw-r--r--drivers/mtd/maps/dbox2-flash.c2
-rw-r--r--drivers/mtd/maps/mtx-1_flash.c2
-rw-r--r--drivers/mtd/maps/nettel.c4
-rw-r--r--drivers/mtd/maps/pcmciamtd.c1
-rw-r--r--drivers/mtd/maps/physmap.c255
-rw-r--r--drivers/mtd/mtdblock.c16
-rw-r--r--drivers/mtd/mtdblock_ro.c4
-rw-r--r--drivers/mtd/mtdchar.c327
-rw-r--r--drivers/mtd/mtdconcat.c335
-rw-r--r--drivers/mtd/mtdcore.c33
-rw-r--r--drivers/mtd/mtdpart.c171
-rw-r--r--drivers/mtd/nand/Kconfig57
-rw-r--r--drivers/mtd/nand/Makefile4
-rw-r--r--drivers/mtd/nand/ams-delta.c237
-rw-r--r--drivers/mtd/nand/au1550nd.c321
-rw-r--r--drivers/mtd/nand/autcpu12.c125
-rw-r--r--drivers/mtd/nand/cs553x_nand.c353
-rw-r--r--drivers/mtd/nand/diskonchip.c530
-rw-r--r--drivers/mtd/nand/edb7312.c97
-rw-r--r--drivers/mtd/nand/h1910.c98
-rw-r--r--drivers/mtd/nand/nand_base.c3249
-rw-r--r--drivers/mtd/nand/nand_bbt.c502
-rw-r--r--drivers/mtd/nand/nand_ecc.c227
-rw-r--r--drivers/mtd/nand/nand_ids.c177
-rw-r--r--drivers/mtd/nand/nandsim.c95
-rw-r--r--drivers/mtd/nand/ndfc.c311
-rw-r--r--drivers/mtd/nand/ppchameleonevb.c256
-rw-r--r--drivers/mtd/nand/rtc_from4.c351
-rw-r--r--drivers/mtd/nand/s3c2410.c252
-rw-r--r--drivers/mtd/nand/sharpsl.c146
-rw-r--r--drivers/mtd/nand/spia.c101
-rw-r--r--drivers/mtd/nand/toto.c121
-rw-r--r--drivers/mtd/nand/ts7250.c206
-rw-r--r--drivers/mtd/nftlcore.c221
-rw-r--r--drivers/mtd/nftlmount.c91
-rw-r--r--drivers/mtd/onenand/Kconfig14
-rw-r--r--drivers/mtd/onenand/onenand_base.c718
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c9
-rw-r--r--drivers/mtd/redboot.c18
-rw-r--r--drivers/mtd/rfd_ftl.c48
69 files changed, 6385 insertions, 4904 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index f6b775e63ac..5ac265dde42 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -78,7 +78,7 @@ config MTD_REDBOOT_DIRECTORY_BLOCK
option.
The option specifies which Flash sectors holds the RedBoot
- partition table. A zero or positive value gives an absolete
+ partition table. A zero or positive value gives an absolute
erase block number. A negative value specifies a number of
sectors before the end of the device.
@@ -103,7 +103,7 @@ config MTD_CMDLINE_PARTS
bool "Command line partition table parsing"
depends on MTD_PARTITIONS = "y"
---help---
- Allow generic configuration of the MTD paritition tables via the kernel
+ Allow generic configuration of the MTD partition tables via the kernel
command line. Multiple flash resources are supported for hardware where
different kinds of flash memory are available.
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index a7ec5954caf..6d8f30deb86 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -30,7 +30,6 @@ config MTD_JEDECPROBE
config MTD_GEN_PROBE
tristate
- select OBSOLETE_INTERMODULE
config MTD_CFI_ADV_OPTIONS
bool "Flash chip driver advanced configuration options"
diff --git a/drivers/mtd/chips/Makefile b/drivers/mtd/chips/Makefile
index 8afe3092c4e..75bc1c2a0f4 100644
--- a/drivers/mtd/chips/Makefile
+++ b/drivers/mtd/chips/Makefile
@@ -3,13 +3,6 @@
#
# $Id: Makefile.common,v 1.5 2005/11/07 11:14:22 gleixner Exp $
-# *** BIG UGLY NOTE ***
-#
-# The removal of get_module_symbol() and replacement with
-# inter_module_register() et al has introduced a link order dependency
-# here where previously there was none. We now have to ensure that
-# the CFI command set drivers are linked before gen_probe.o
-
obj-$(CONFIG_MTD) += chipreg.o
obj-$(CONFIG_MTD_AMDSTD) += amd_flash.o
obj-$(CONFIG_MTD_CFI) += cfi_probe.o
diff --git a/drivers/mtd/chips/amd_flash.c b/drivers/mtd/chips/amd_flash.c
index 57115618c49..16eaca69fb5 100644
--- a/drivers/mtd/chips/amd_flash.c
+++ b/drivers/mtd/chips/amd_flash.c
@@ -97,7 +97,6 @@ struct amd_flash_private {
int interleave;
int numchips;
unsigned long chipshift;
-// const char *im_name;
struct flchip chips[0];
};
@@ -131,12 +130,6 @@ static struct mtd_chip_driver amd_flash_chipdrv = {
.module = THIS_MODULE
};
-
-
-static const char im_name[] = "amd_flash";
-
-
-
static inline __u32 wide_read(struct map_info *map, __u32 addr)
{
if (map->buswidth == 1) {
@@ -737,6 +730,7 @@ static struct mtd_info *amd_flash_probe(struct map_info *map)
offset += dev_size;
}
mtd->type = MTD_NORFLASH;
+ mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
mtd->name = map->name;
mtd->erase = amd_flash_erase;
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 1c074d63ff3..0d435814aaa 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -331,13 +331,6 @@ read_pri_intelext(struct map_info *map, __u16 adr)
return extp;
}
-/* This routine is made available to other mtd code via
- * inter_module_register. It must only be accessed through
- * inter_module_get which will bump the use count of this module. The
- * addresses passed back in cfi are valid as long as the use count of
- * this module is non-zero, i.e. between inter_module_get and
- * inter_module_put. Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
- */
struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
{
struct cfi_private *cfi = map->fldrv_priv;
@@ -406,7 +399,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
for (i=0; i< cfi->numchips; i++) {
cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
- cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
+ cfi->chips[i].erase_time = 1000<<cfi->cfiq->BlockEraseTimeoutTyp;
cfi->chips[i].ref_point_counter = 0;
init_waitqueue_head(&(cfi->chips[i].wq));
}
@@ -415,6 +408,11 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
return cfi_intelext_setup(mtd);
}
+struct mtd_info *cfi_cmdset_0003(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0001")));
+struct mtd_info *cfi_cmdset_0200(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0001")));
+EXPORT_SYMBOL_GPL(cfi_cmdset_0001);
+EXPORT_SYMBOL_GPL(cfi_cmdset_0003);
+EXPORT_SYMBOL_GPL(cfi_cmdset_0200);
static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
{
@@ -547,12 +545,12 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
if (extp->MinorVersion >= '4') {
struct cfi_intelext_programming_regioninfo *prinfo;
prinfo = (struct cfi_intelext_programming_regioninfo *)&extp->extra[offs];
- MTD_PROGREGION_SIZE(mtd) = cfi->interleave << prinfo->ProgRegShift;
+ mtd->writesize = cfi->interleave << prinfo->ProgRegShift;
MTD_PROGREGION_CTRLMODE_VALID(mtd) = cfi->interleave * prinfo->ControlValid;
MTD_PROGREGION_CTRLMODE_INVALID(mtd) = cfi->interleave * prinfo->ControlInvalid;
- mtd->flags |= MTD_PROGRAM_REGIONS;
+ mtd->flags &= ~MTD_BIT_WRITEABLE;
printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n",
- map->name, MTD_PROGREGION_SIZE(mtd),
+ map->name, mtd->writesize,
MTD_PROGREGION_CTRLMODE_VALID(mtd),
MTD_PROGREGION_CTRLMODE_INVALID(mtd));
}
@@ -896,26 +894,33 @@ static void __xipram xip_enable(struct map_info *map, struct flchip *chip,
/*
* When a delay is required for the flash operation to complete, the
- * xip_udelay() function is polling for both the given timeout and pending
- * (but still masked) hardware interrupts. Whenever there is an interrupt
- * pending then the flash erase or write operation is suspended, array mode
- * restored and interrupts unmasked. Task scheduling might also happen at that
- * point. The CPU eventually returns from the interrupt or the call to
- * schedule() and the suspended flash operation is resumed for the remaining
- * of the delay period.
+ * xip_wait_for_operation() function is polling for both the given timeout
+ * and pending (but still masked) hardware interrupts. Whenever there is an
+ * interrupt pending then the flash erase or write operation is suspended,
+ * array mode restored and interrupts unmasked. Task scheduling might also
+ * happen at that point. The CPU eventually returns from the interrupt or
+ * the call to schedule() and the suspended flash operation is resumed for
+ * the remaining of the delay period.
*
* Warning: this function _will_ fool interrupt latency tracing tools.
*/
-static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
- unsigned long adr, int usec)
+static int __xipram xip_wait_for_operation(
+ struct map_info *map, struct flchip *chip,
+ unsigned long adr, int *chip_op_time )
{
struct cfi_private *cfi = map->fldrv_priv;
struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
map_word status, OK = CMD(0x80);
- unsigned long suspended, start = xip_currtime();
+ unsigned long usec, suspended, start, done;
flstate_t oldstate, newstate;
+ start = xip_currtime();
+ usec = *chip_op_time * 8;
+ if (usec == 0)
+ usec = 500000;
+ done = 0;
+
do {
cpu_relax();
if (xip_irqpending() && cfip &&
@@ -932,9 +937,9 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
* we resume the whole thing at once). Yes, it
* can happen!
*/
+ usec -= done;
map_write(map, CMD(0xb0), adr);
map_write(map, CMD(0x70), adr);
- usec -= xip_elapsed_since(start);
suspended = xip_currtime();
do {
if (xip_elapsed_since(suspended) > 100000) {
@@ -944,7 +949,7 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
* This is a critical error but there
* is not much we can do here.
*/
- return;
+ return -EIO;
}
status = map_read(map, adr);
} while (!map_word_andequal(map, status, OK, OK));
@@ -1004,65 +1009,107 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip,
xip_cpu_idle();
}
status = map_read(map, adr);
+ done = xip_elapsed_since(start);
} while (!map_word_andequal(map, status, OK, OK)
- && xip_elapsed_since(start) < usec);
-}
+ && done < usec);
-#define UDELAY(map, chip, adr, usec) xip_udelay(map, chip, adr, usec)
+ return (done >= usec) ? -ETIME : 0;
+}
/*
* The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while
* the flash is actively programming or erasing since we have to poll for
* the operation to complete anyway. We can't do that in a generic way with
* a XIP setup so do it before the actual flash operation in this case
- * and stub it out from INVALIDATE_CACHE_UDELAY.
+ * and stub it out from INVAL_CACHE_AND_WAIT.
*/
#define XIP_INVAL_CACHED_RANGE(map, from, size) \
INVALIDATE_CACHED_RANGE(map, from, size)
-#define INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr, adr, len, usec) \
- UDELAY(map, chip, cmd_adr, usec)
-
-/*
- * Extra notes:
- *
- * Activating this XIP support changes the way the code works a bit. For
- * example the code to suspend the current process when concurrent access
- * happens is never executed because xip_udelay() will always return with the
- * same chip state as it was entered with. This is why there is no care for
- * the presence of add_wait_queue() or schedule() calls from within a couple
- * xip_disable()'d areas of code, like in do_erase_oneblock for example.
- * The queueing and scheduling are always happening within xip_udelay().
- *
- * Similarly, get_chip() and put_chip() just happen to always be executed
- * with chip->state set to FL_READY (or FL_XIP_WHILE_*) where flash state
- * is in array mode, therefore never executing many cases therein and not
- * causing any problem with XIP.
- */
+#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, p_usec) \
+ xip_wait_for_operation(map, chip, cmd_adr, p_usec)
#else
#define xip_disable(map, chip, adr)
#define xip_enable(map, chip, adr)
#define XIP_INVAL_CACHED_RANGE(x...)
+#define INVAL_CACHE_AND_WAIT inval_cache_and_wait_for_operation
+
+static int inval_cache_and_wait_for_operation(
+ struct map_info *map, struct flchip *chip,
+ unsigned long cmd_adr, unsigned long inval_adr, int inval_len,
+ int *chip_op_time )
+{
+ struct cfi_private *cfi = map->fldrv_priv;
+ map_word status, status_OK = CMD(0x80);
+ int z, chip_state = chip->state;
+ unsigned long timeo;
+
+ spin_unlock(chip->mutex);
+ if (inval_len)
+ INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len);
+ if (*chip_op_time)
+ cfi_udelay(*chip_op_time);
+ spin_lock(chip->mutex);
+
+ timeo = *chip_op_time * 8 * HZ / 1000000;
+ if (timeo < HZ/2)
+ timeo = HZ/2;
+ timeo += jiffies;
+
+ z = 0;
+ for (;;) {
+ if (chip->state != chip_state) {
+ /* Someone's suspended the operation: sleep */
+ DECLARE_WAITQUEUE(wait, current);
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&chip->wq, &wait);
+ spin_unlock(chip->mutex);
+ schedule();
+ remove_wait_queue(&chip->wq, &wait);
+ timeo = jiffies + (HZ / 2); /* FIXME */
+ spin_lock(chip->mutex);
+ continue;
+ }
-#define UDELAY(map, chip, adr, usec) \
-do { \
- spin_unlock(chip->mutex); \
- cfi_udelay(usec); \
- spin_lock(chip->mutex); \
-} while (0)
-
-#define INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr, adr, len, usec) \
-do { \
- spin_unlock(chip->mutex); \
- INVALIDATE_CACHED_RANGE(map, adr, len); \
- cfi_udelay(usec); \
- spin_lock(chip->mutex); \
-} while (0)
+ status = map_read(map, cmd_adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
+ break;
+
+ /* OK Still waiting */
+ if (time_after(jiffies, timeo)) {
+ map_write(map, CMD(0x70), cmd_adr);
+ chip->state = FL_STATUS;
+ return -ETIME;
+ }
+
+ /* Latency issues. Drop the lock, wait a while and retry */
+ z++;
+ spin_unlock(chip->mutex);
+ cfi_udelay(1);
+ spin_lock(chip->mutex);
+ }
+
+ if (!z) {
+ if (!--(*chip_op_time))
+ *chip_op_time = 1;
+ } else if (z > 1)
+ ++(*chip_op_time);
+
+ /* Done and happy. */
+ chip->state = FL_STATUS;
+ return 0;
+}
#endif
+#define WAIT_TIMEOUT(map, chip, adr, udelay) \
+ ({ int __udelay = (udelay); \
+ INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, &__udelay); })
+
+
static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
{
unsigned long cmd_addr;
@@ -1252,14 +1299,11 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
unsigned long adr, map_word datum, int mode)
{
struct cfi_private *cfi = map->fldrv_priv;
- map_word status, status_OK, write_cmd;
- unsigned long timeo;
- int z, ret=0;
+ map_word status, write_cmd;
+ int ret=0;
adr += chip->start;
- /* Let's determine those according to the interleave only once */
- status_OK = CMD(0x80);
switch (mode) {
case FL_WRITING:
write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0x40) : CMD(0x41);
@@ -1285,57 +1329,17 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
map_write(map, datum, adr);
chip->state = mode;
- INVALIDATE_CACHE_UDELAY(map, chip, adr,
- adr, map_bankwidth(map),
- chip->word_write_time);
-
- timeo = jiffies + (HZ/2);
- z = 0;
- for (;;) {
- if (chip->state != mode) {
- /* Someone's suspended the write. Sleep */
- DECLARE_WAITQUEUE(wait, current);
-
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(&chip->wq, &wait);
- spin_unlock(chip->mutex);
- schedule();
- remove_wait_queue(&chip->wq, &wait);
- timeo = jiffies + (HZ / 2); /* FIXME */
- spin_lock(chip->mutex);
- continue;
- }
-
- status = map_read(map, adr);
- if (map_word_andequal(map, status, status_OK, status_OK))
- break;
-
- /* OK Still waiting */
- if (time_after(jiffies, timeo)) {
- map_write(map, CMD(0x70), adr);
- chip->state = FL_STATUS;
- xip_enable(map, chip, adr);
- printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
- ret = -EIO;
- goto out;
- }
-
- /* Latency issues. Drop the lock, wait a while and retry */
- z++;
- UDELAY(map, chip, adr, 1);
- }
- if (!z) {
- chip->word_write_time--;
- if (!chip->word_write_time)
- chip->word_write_time = 1;
+ ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
+ adr, map_bankwidth(map),
+ &chip->word_write_time);
+ if (ret) {
+ xip_enable(map, chip, adr);
+ printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
+ goto out;
}
- if (z > 1)
- chip->word_write_time++;
-
- /* Done and happy. */
- chip->state = FL_STATUS;
/* check for errors */
+ status = map_read(map, adr);
if (map_word_bitsset(map, status, CMD(0x1a))) {
unsigned long chipstatus = MERGESTATUS(status);
@@ -1452,9 +1456,9 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long *pvec_seek, int len)
{
struct cfi_private *cfi = map->fldrv_priv;
- map_word status, status_OK, write_cmd, datum;
- unsigned long cmd_adr, timeo;
- int wbufsize, z, ret=0, word_gap, words;
+ map_word status, write_cmd, datum;
+ unsigned long cmd_adr;
+ int ret, wbufsize, word_gap, words;
const struct kvec *vec;
unsigned long vec_seek;
@@ -1463,7 +1467,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
cmd_adr = adr & ~(wbufsize-1);
/* Let's determine this according to the interleave only once */
- status_OK = CMD(0x80);
write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0xe8) : CMD(0xe9);
spin_lock(chip->mutex);
@@ -1477,12 +1480,14 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
ENABLE_VPP(map);
xip_disable(map, chip, cmd_adr);
- /* §4.8 of the 28FxxxJ3A datasheet says "Any time SR.4 and/or SR.5 is set
+ /* §4.8 of the 28FxxxJ3A datasheet says "Any time SR.4 and/or SR.5 is set
[...], the device will not accept any more Write to Buffer commands".
So we must check here and reset those bits if they're set. Otherwise
we're just pissing in the wind */
- if (chip->state != FL_STATUS)
+ if (chip->state != FL_STATUS) {
map_write(map, CMD(0x70), cmd_adr);
+ chip->state = FL_STATUS;
+ }
status = map_read(map, cmd_adr);
if (map_word_bitsset(map, status, CMD(0x30))) {
xip_enable(map, chip, cmd_adr);
@@ -1493,32 +1498,20 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
}
chip->state = FL_WRITING_TO_BUFFER;
-
- z = 0;
- for (;;) {
- map_write(map, write_cmd, cmd_adr);
-
+ map_write(map, write_cmd, cmd_adr);
+ ret = WAIT_TIMEOUT(map, chip, cmd_adr, 0);
+ if (ret) {
+ /* Argh. Not ready for write to buffer */
+ map_word Xstatus = map_read(map, cmd_adr);
+ map_write(map, CMD(0x70), cmd_adr);
+ chip->state = FL_STATUS;
status = map_read(map, cmd_adr);
- if (map_word_andequal(map, status, status_OK, status_OK))
- break;
-
- UDELAY(map, chip, cmd_adr, 1);
-
- if (++z > 20) {
- /* Argh. Not ready for write to buffer */
- map_word Xstatus;
- map_write(map, CMD(0x70), cmd_adr);
- chip->state = FL_STATUS;
- Xstatus = map_read(map, cmd_adr);
- /* Odd. Clear status bits */
- map_write(map, CMD(0x50), cmd_adr);
- map_write(map, CMD(0x70), cmd_adr);
- xip_enable(map, chip, cmd_adr);
- printk(KERN_ERR "%s: Chip not ready for buffer write. status = %lx, Xstatus = %lx\n",
- map->name, status.x[0], Xstatus.x[0]);
- ret = -EIO;
- goto out;
- }
+ map_write(map, CMD(0x50), cmd_adr);
+ map_write(map, CMD(0x70), cmd_adr);
+ xip_enable(map, chip, cmd_adr);
+ printk(KERN_ERR "%s: Chip not ready for buffer write. Xstatus = %lx, status = %lx\n",
+ map->name, Xstatus.x[0], status.x[0]);
+ goto out;
}
/* Figure out the number of words to write */
@@ -1573,56 +1566,19 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
map_write(map, CMD(0xd0), cmd_adr);
chip->state = FL_WRITING;
- INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr,
- adr, len,
- chip->buffer_write_time);
-
- timeo = jiffies + (HZ/2);
- z = 0;
- for (;;) {
- if (chip->state != FL_WRITING) {
- /* Someone's suspended the write. Sleep */
- DECLARE_WAITQUEUE(wait, current);
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(&chip->wq, &wait);
- spin_unlock(chip->mutex);
- schedule();
- remove_wait_queue(&chip->wq, &wait);
- timeo = jiffies + (HZ / 2); /* FIXME */
- spin_lock(chip->mutex);
- continue;
- }
-
- status = map_read(map, cmd_adr);
- if (map_word_andequal(map, status, status_OK, status_OK))
- break;
-
- /* OK Still waiting */
- if (time_after(jiffies, timeo)) {
- map_write(map, CMD(0x70), cmd_adr);
- chip->state = FL_STATUS;
- xip_enable(map, chip, cmd_adr);
- printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name);
- ret = -EIO;
- goto out;
- }
-
- /* Latency issues. Drop the lock, wait a while and retry */
- z++;
- UDELAY(map, chip, cmd_adr, 1);
- }
- if (!z) {
- chip->buffer_write_time--;
- if (!chip->buffer_write_time)
- chip->buffer_write_time = 1;
+ ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr,
+ adr, len,
+ &chip->buffer_write_time);
+ if (ret) {
+ map_write(map, CMD(0x70), cmd_adr);
+ chip->state = FL_STATUS;
+ xip_enable(map, chip, cmd_adr);
+ printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name);
+ goto out;
}
- if (z > 1)
- chip->buffer_write_time++;
-
- /* Done and happy. */
- chip->state = FL_STATUS;
/* check for errors */
+ status = map_read(map, cmd_adr);
if (map_word_bitsset(map, status, CMD(0x1a))) {
unsigned long chipstatus = MERGESTATUS(status);
@@ -1693,6 +1649,11 @@ static int cfi_intelext_writev (struct mtd_info *mtd, const struct kvec *vecs,
if (chipnum == cfi->numchips)
return 0;
}
+
+ /* Be nice and reschedule with the chip in a usable state for other
+ processes. */
+ cond_resched();
+
} while (len);
return 0;
@@ -1713,17 +1674,12 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
unsigned long adr, int len, void *thunk)
{
struct cfi_private *cfi = map->fldrv_priv;
- map_word status, status_OK;
- unsigned long timeo;
+ map_word status;
int retries = 3;
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
+ int ret;
adr += chip->start;
- /* Let's determine this according to the interleave only once */
- status_OK = CMD(0x80);
-
retry:
spin_lock(chip->mutex);
ret = get_chip(map, chip, adr, FL_ERASING);
@@ -1745,48 +1701,15 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
chip->state = FL_ERASING;
chip->erase_suspended = 0;
- INVALIDATE_CACHE_UDELAY(map, chip, adr,
- adr, len,
- chip->erase_time*1000/2);
-
- /* FIXME. Use a timer to check this, and return immediately. */
- /* Once the state machine's known to be working I'll do that */
-
- timeo = jiffies + (HZ*20);
- for (;;) {
- if (chip->state != FL_ERASING) {
- /* Someone's suspended the erase. Sleep */
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(&chip->wq, &wait);
- spin_unlock(chip->mutex);
- schedule();
- remove_wait_queue(&chip->wq, &wait);
- spin_lock(chip->mutex);
- continue;
- }
- if (chip->erase_suspended) {
- /* This erase was suspended and resumed.
- Adjust the timeout */
- timeo = jiffies + (HZ*20); /* FIXME */
- chip->erase_suspended = 0;
- }
-
- status = map_read(map, adr);
- if (map_word_andequal(map, status, status_OK, status_OK))
- break;
-
- /* OK Still waiting */
- if (time_after(jiffies, timeo)) {
- map_write(map, CMD(0x70), adr);
- chip->state = FL_STATUS;
- xip_enable(map, chip, adr);
- printk(KERN_ERR "%s: block erase error: (status timeout)\n", map->name);
- ret = -EIO;
- goto out;
- }
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1000000/HZ);
+ ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
+ adr, len,
+ &chip->erase_time);
+ if (ret) {
+ map_write(map, CMD(0x70), adr);
+ chip->state = FL_STATUS;
+ xip_enable(map, chip, adr);
+ printk(KERN_ERR "%s: block erase error: (status timeout)\n", map->name);
+ goto out;
}
/* We've broken this before. It doesn't hurt to be safe */
@@ -1815,7 +1738,6 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
ret = -EIO;
} else if (chipstatus & 0x20 && retries--) {
printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus);
- timeo = jiffies + HZ;
put_chip(map, chip, adr);
spin_unlock(chip->mutex);
goto retry;
@@ -1921,15 +1843,11 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
{
struct cfi_private *cfi = map->fldrv_priv;
struct cfi_pri_intelext *extp = cfi->cmdset_priv;
- map_word status, status_OK;
- unsigned long timeo = jiffies + HZ;
+ int udelay;
int ret;
adr += chip->start;
- /* Let's determine this according to the interleave only once */
- status_OK = CMD(0x80);
-
spin_lock(chip->mutex);
ret = get_chip(map, chip, adr, FL_LOCKING);
if (ret) {
@@ -1954,41 +1872,21 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
* If Instant Individual Block Locking supported then no need
* to delay.
*/
+ udelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1000000/HZ : 0;
- if (!extp || !(extp->FeatureSupport & (1 << 5)))
- UDELAY(map, chip, adr, 1000000/HZ);
-
- /* FIXME. Use a timer to check this, and return immediately. */
- /* Once the state machine's known to be working I'll do that */
-
- timeo = jiffies + (HZ*20);
- for (;;) {
-
- status = map_read(map, adr);
- if (map_word_andequal(map, status, status_OK, status_OK))
- break;
-
- /* OK Still waiting */
- if (time_after(jiffies, timeo)) {
- map_write(map, CMD(0x70), adr);
- chip->state = FL_STATUS;
- xip_enable(map, chip, adr);
- printk(KERN_ERR "%s: block unlock error: (status timeout)\n", map->name);
- put_chip(map, chip, adr);
- spin_unlock(chip->mutex);
- return -EIO;
- }
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1);
+ ret = WAIT_TIMEOUT(map, chip, adr, udelay);
+ if (ret) {
+ map_write(map, CMD(0x70), adr);
+ chip->state = FL_STATUS;
+ xip_enable(map, chip, adr);
+ printk(KERN_ERR "%s: block unlock error: (status timeout)\n", map->name);
+ goto out;
}
- /* Done and happy. */
- chip->state = FL_STATUS;
xip_enable(map, chip, adr);
- put_chip(map, chip, adr);
+out: put_chip(map, chip, adr);
spin_unlock(chip->mutex);
- return 0;
+ return ret;
}
static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
@@ -2445,28 +2343,8 @@ static void cfi_intelext_destroy(struct mtd_info *mtd)
kfree(mtd->eraseregions);
}
-static char im_name_0001[] = "cfi_cmdset_0001";
-static char im_name_0003[] = "cfi_cmdset_0003";
-static char im_name_0200[] = "cfi_cmdset_0200";
-
-static int __init cfi_intelext_init(void)
-{
- inter_module_register(im_name_0001, THIS_MODULE, &cfi_cmdset_0001);
- inter_module_register(im_name_0003, THIS_MODULE, &cfi_cmdset_0001);
- inter_module_register(im_name_0200, THIS_MODULE, &cfi_cmdset_0001);
- return 0;
-}
-
-static void __exit cfi_intelext_exit(void)
-{
- inter_module_unregister(im_name_0001);
- inter_module_unregister(im_name_0003);
- inter_module_unregister(im_name_0200);
-}
-
-module_init(cfi_intelext_init);
-module_exit(cfi_intelext_exit);
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
MODULE_DESCRIPTION("MTD chip driver for Intel/Sharp flash chips");
+MODULE_ALIAS("cfi_cmdset_0003");
+MODULE_ALIAS("cfi_cmdset_0200");
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index aed10bd5c3c..1e01ad38b26 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -236,6 +236,7 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
mtd->resume = cfi_amdstd_resume;
mtd->flags = MTD_CAP_NORFLASH;
mtd->name = map->name;
+ mtd->writesize = 1;
if (cfi->cfi_mode==CFI_MODE_CFI){
unsigned char bootloc;
@@ -326,7 +327,7 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
return cfi_amdstd_setup(mtd);
}
-
+EXPORT_SYMBOL_GPL(cfi_cmdset_0002);
static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
{
@@ -1758,25 +1759,6 @@ static void cfi_amdstd_destroy(struct mtd_info *mtd)
kfree(mtd->eraseregions);
}
-static char im_name[]="cfi_cmdset_0002";
-
-
-static int __init cfi_amdstd_init(void)
-{
- inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0002);
- return 0;
-}
-
-
-static void __exit cfi_amdstd_exit(void)
-{
- inter_module_unregister(im_name);
-}
-
-
-module_init(cfi_amdstd_init);
-module_exit(cfi_amdstd_exit);
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Crossnet Co. <info@crossnet.co.jp> et al.");
MODULE_DESCRIPTION("MTD chip driver for AMD/Fujitsu flash chips");
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 0807c1c91e5..fae70a5db54 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -162,6 +162,7 @@ struct mtd_info *cfi_cmdset_0020(struct map_info *map, int primary)
return cfi_staa_setup(map);
}
+EXPORT_SYMBOL_GPL(cfi_cmdset_0020);
static struct mtd_info *cfi_staa_setup(struct map_info *map)
{
@@ -237,9 +238,8 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
mtd->unlock = cfi_staa_unlock;
mtd->suspend = cfi_staa_suspend;
mtd->resume = cfi_staa_resume;
- mtd->flags = MTD_CAP_NORFLASH;
- mtd->flags |= MTD_ECC; /* FIXME: Not all STMicro flashes have this */
- mtd->eccsize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
+ mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE;
+ mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
map->fldrv = &cfi_staa_chipdrv;
__module_get(THIS_MODULE);
mtd->name = map->name;
@@ -1410,20 +1410,4 @@ static void cfi_staa_destroy(struct mtd_info *mtd)
kfree(cfi);
}
-static char im_name[]="cfi_cmdset_0020";
-
-static int __init cfi_staa_init(void)
-{
- inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0020);
- return 0;
-}
-
-static void __exit cfi_staa_exit(void)
-{
- inter_module_unregister(im_name);
-}
-
-module_init(cfi_staa_init);
-module_exit(cfi_staa_exit);
-
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index e636aa86bc2..4bf9f8cac0d 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -349,12 +349,12 @@ static void print_cfi_ident(struct cfi_ident *cfip)
else
printk("No Vpp line\n");
- printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
- printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
+ printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
+ printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
- printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
- printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
+ printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
+ printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
}
else
printk("Full buffer write not supported\n");
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index 41bd59d20d8..cdb0f590b40 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -37,8 +37,15 @@ struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp)
if (!mtd)
mtd = check_cmd_set(map, 0); /* Then the secondary */
- if (mtd)
+ if (mtd) {
+ if (mtd->size > map->size) {
+ printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n",
+ (unsigned long)mtd->size >> 10,
+ (unsigned long)map->size >> 10);
+ mtd->size = map->size;
+ }
return mtd;
+ }
printk(KERN_WARNING"gen_probe: No supported Vendor Command Set found\n");
@@ -100,7 +107,12 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
* Align bitmap storage size to full byte.
*/
max_chips = map->size >> cfi.chipshift;
- mapsize = (max_chips / 8) + ((max_chips % 8) ? 1 : 0);
+ if (!max_chips) {
+ printk(KERN_WARNING "NOR chip too large to fit in mapping. Attempting to cope...\n");
+ max_chips = 1;
+ }
+
+ mapsize = (max_chips + BITS_PER_LONG-1) / BITS_PER_LONG;
chip_map = kmalloc(mapsize, GFP_KERNEL);
if (!chip_map) {
printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
@@ -194,25 +206,28 @@ static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map,
{
struct cfi_private *cfi = map->fldrv_priv;
__u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID;
-#if defined(CONFIG_MODULES) && defined(HAVE_INTER_MODULE)
- char probename[32];
+#ifdef CONFIG_MODULES
+ char probename[16+sizeof(MODULE_SYMBOL_PREFIX)];
cfi_cmdset_fn_t *probe_function;
- sprintf(probename, "cfi_cmdset_%4.4X", type);
+ sprintf(probename, MODULE_SYMBOL_PREFIX "cfi_cmdset_%4.4X", type);
- probe_function = inter_module_get_request(probename, probename);
+ probe_function = __symbol_get(probename);
+ if (!probe_function) {
+ request_module(probename + sizeof(MODULE_SYMBOL_PREFIX) - 1);
+ probe_function = __symbol_get(probename);
+ }
if (probe_function) {
struct mtd_info *mtd;
mtd = (*probe_function)(map, primary);
/* If it was happy, it'll have increased its own use count */
- inter_module_put(probename);
+ symbol_put_addr(probe_function);
return mtd;
}
#endif
- printk(KERN_NOTICE "Support for command set %04X not present\n",
- type);
+ printk(KERN_NOTICE "Support for command set %04X not present\n", type);
return NULL;
}
@@ -226,12 +241,8 @@ static struct mtd_info *check_cmd_set(struct map_info *map, int primary)
return NULL;
switch(type){
- /* Urgh. Ifdefs. The version with weak symbols was
- * _much_ nicer. Shame it didn't seem to work on
- * anything but x86, really.
- * But we can't rely in inter_module_get() because
- * that'd mean we depend on link order.
- */
+ /* We need these for the !CONFIG_MODULES case,
+ because symbol_get() doesn't work there */
#ifdef CONFIG_MTD_CFI_INTELEXT
case 0x0001:
case 0x0003:
@@ -246,9 +257,9 @@ static struct mtd_info *check_cmd_set(struct map_info *map, int primary)
case 0x0020:
return cfi_cmdset_0020(map, primary);
#endif
+ default:
+ return cfi_cmdset_unknown(map, primary);
}
-
- return cfi_cmdset_unknown(map, primary);
}
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index bd2e876a814..763925747db 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -70,7 +70,7 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
mtd->read = mapram_read;
mtd->write = mapram_write;
mtd->sync = mapram_nop;
- mtd->flags = MTD_CAP_RAM | MTD_VOLATILE;
+ mtd->flags = MTD_CAP_RAM;
mtd->erasesize = PAGE_SIZE;
while(mtd->size & (mtd->erasesize - 1))
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index 624c12c232c..bc6ee9ef8a3 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -46,9 +46,7 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
mtd->write = maprom_write;
mtd->sync = maprom_nop;
mtd->flags = MTD_CAP_ROM;
- mtd->erasesize = 131072;
- while(mtd->size & (mtd->erasesize - 1))
- mtd->erasesize >>= 1;
+ mtd->erasesize = map->size;
__module_get(THIS_MODULE);
return mtd;
diff --git a/drivers/mtd/chips/sharp.c b/drivers/mtd/chips/sharp.c
index 3cc0b23c586..967abbecdff 100644
--- a/drivers/mtd/chips/sharp.c
+++ b/drivers/mtd/chips/sharp.c
@@ -140,6 +140,7 @@ static struct mtd_info *sharp_probe(struct map_info *map)
mtd->suspend = sharp_suspend;
mtd->resume = sharp_resume;
mtd->flags = MTD_CAP_NORFLASH;
+ mtd->writesize = 1;
mtd->name = map->name;
memset(sharp, 0, sizeof(*sharp));
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 7fac438b5c3..16c02b5ccf7 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -47,6 +47,11 @@ config MTD_MS02NV
accelerator. Say Y here if you have a DECstation 5000/2x0 or a
DECsystem 5900 equipped with such a module.
+ If you want to compile this driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module will
+ be called ms02-nv.o.
+
config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash"
depends on MTD && SPI_MASTER && EXPERIMENTAL
@@ -209,7 +214,6 @@ config MTD_DOC2001PLUS
config MTD_DOCPROBE
tristate
select MTD_DOCECC
- select OBSOLETE_INTERMODULE
config MTD_DOCECC
tristate
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index b6573670316..0f788d5c4bf 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -3,13 +3,6 @@
#
# $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $
-# *** BIG UGLY NOTE ***
-#
-# The removal of get_module_symbol() and replacement with
-# inter_module_register() et al has introduced a link order dependency
-# here where previously there was none. We now have to ensure that
-# doc200[01].o are linked before docprobe.o
-
obj-$(CONFIG_MTD_DOC2000) += doc2000.o
obj-$(CONFIG_MTD_DOC2001) += doc2001.o
obj-$(CONFIG_MTD_DOC2001PLUS) += doc2001plus.o
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 4160b8334c5..0d98c223c5f 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -4,7 +4,7 @@
* block2mtd.c - create an mtd from a block device
*
* Copyright (C) 2001,2002 Simon Evans <spse@secret.org.uk>
- * Copyright (C) 2004,2005 Jörn Engel <joern@wh.fh-wedel.de>
+ * Copyright (C) 2004-2006 Jörn Engel <joern@wh.fh-wedel.de>
*
* Licence: GPL
*/
@@ -331,7 +331,6 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
dev->mtd.writev = default_mtd_writev;
dev->mtd.sync = block2mtd_sync;
dev->mtd.read = block2mtd_read;
- dev->mtd.readv = default_mtd_readv;
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;
@@ -351,6 +350,12 @@ devinit_err:
}
+/* This function works similar to reguler strtoul. In addition, it
+ * allows some suffixes for a more human-readable number format:
+ * ki, Ki, kiB, KiB - multiply result with 1024
+ * Mi, MiB - multiply result with 1024^2
+ * Gi, GiB - multiply result with 1024^3
+ */
static int ustrtoul(const char *cp, char **endp, unsigned int base)
{
unsigned long result = simple_strtoul(cp, endp, base);
@@ -359,11 +364,16 @@ static int ustrtoul(const char *cp, char **endp, unsigned int base)
result *= 1024;
case 'M':
result *= 1024;
+ case 'K':
case 'k':
result *= 1024;
/* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
- if ((*endp)[1] == 'i')
- (*endp) += 2;
+ if ((*endp)[1] == 'i') {
+ if ((*endp)[2] == 'B')
+ (*endp) += 3;
+ else
+ (*endp) += 2;
+ }
}
return result;
}
@@ -418,7 +428,8 @@ static inline void kill_final_newline(char *str)
static int block2mtd_setup(const char *val, struct kernel_param *kp)
{
- char buf[80+12], *str=buf; /* 80 for device, 12 for erase size */
+ char buf[80+12]; /* 80 for device, 12 for erase size */
+ char *str = buf;
char *token[2];
char *name;
size_t erase_size = PAGE_SIZE;
@@ -430,7 +441,7 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp)
strcpy(str, val);
kill_final_newline(str);
- for (i=0; i<2; i++)
+ for (i = 0; i < 2; i++)
token[i] = strsep(&str, ",");
if (str)
@@ -449,8 +460,10 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp)
if (token[1]) {
ret = parse_num(&erase_size, token[1]);
- if (ret)
+ if (ret) {
+ kfree(name);
parse_err("illegal erase size");
+ }
}
add_device(name, erase_size);
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index 23e7a5c7d2c..c54e40464d8 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -59,13 +59,10 @@ static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-static int doc_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen,
- u_char *eccbuf, struct nand_oobinfo *oobsel);
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, u_char *buf);
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, const u_char *buf);
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops);
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops);
static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
size_t *retlen, const u_char *buf);
static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
@@ -517,16 +514,9 @@ static int DoC2k_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
return retval;
}
-static const char im_name[] = "DoC2k_init";
-
-/* This routine is made available to other mtd code via
- * inter_module_register. It must only be accessed through
- * inter_module_get which will bump the use count of this module. The
- * addresses passed back in mtd are valid as long as the use count of
- * this module is non-zero, i.e. between inter_module_get and
- * inter_module_put. Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
- */
-static void DoC2k_init(struct mtd_info *mtd)
+/* This routine is found from the docprobe code by symbol_get(),
+ * which will bump the use count of this module. */
+void DoC2k_init(struct mtd_info *mtd)
{
struct DiskOnChip *this = mtd->priv;
struct DiskOnChip *old = NULL;
@@ -586,7 +576,7 @@ static void DoC2k_init(struct mtd_info *mtd)
mtd->ecctype = MTD_ECC_RS_DiskOnChip;
mtd->size = 0;
mtd->erasesize = 0;
- mtd->oobblock = 512;
+ mtd->writesize = 512;
mtd->oobsize = 16;
mtd->owner = THIS_MODULE;
mtd->erase = doc_erase;
@@ -594,9 +584,6 @@ static void DoC2k_init(struct mtd_info *mtd)
mtd->unpoint = NULL;
mtd->read = doc_read;
mtd->write = doc_write;
- mtd->read_ecc = doc_read_ecc;
- mtd->write_ecc = doc_write_ecc;
- mtd->writev_ecc = doc_writev_ecc;
mtd->read_oob = doc_read_oob;
mtd->write_oob = doc_write_oob;
mtd->sync = NULL;
@@ -623,6 +610,7 @@ static void DoC2k_init(struct mtd_info *mtd)
return;
}
}
+EXPORT_SYMBOL_GPL(DoC2k_init);
static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, u_char * buf)
@@ -971,72 +959,18 @@ static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
return 0;
}
-static int doc_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
-{
- static char static_buf[512];
- static DEFINE_MUTEX(writev_buf_mutex);
-
- size_t totretlen = 0;
- size_t thisvecofs = 0;
- int ret= 0;
-
- mutex_lock(&writev_buf_mutex);
-
- while(count) {
- size_t thislen, thisretlen;
- unsigned char *buf;
-
- buf = vecs->iov_base + thisvecofs;
- thislen = vecs->iov_len - thisvecofs;
-
-
- if (thislen >= 512) {
- thislen = thislen & ~(512-1);
- thisvecofs += thislen;
- } else {
- /* Not enough to fill a page. Copy into buf */
- memcpy(static_buf, buf, thislen);
- buf = &static_buf[thislen];
-
- while(count && thislen < 512) {
- vecs++;
- count--;
- thisvecofs = min((512-thislen), vecs->iov_len);
- memcpy(buf, vecs->iov_base, thisvecofs);
- thislen += thisvecofs;
- buf += thisvecofs;
- }
- buf = static_buf;
- }
- if (count && thisvecofs == vecs->iov_len) {
- thisvecofs = 0;
- vecs++;
- count--;
- }
- ret = doc_write_ecc(mtd, to, thislen, &thisretlen, buf, eccbuf, oobsel);
-
- totretlen += thisretlen;
-
- if (ret || thisretlen != thislen)
- break;
-
- to += thislen;
- }
-
- mutex_unlock(&writev_buf_mutex);
- *retlen = totretlen;
- return ret;
-}
-
-
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t * retlen, u_char * buf)
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
{
struct DiskOnChip *this = mtd->priv;
int len256 = 0, ret;
struct Nand *mychip;
+ uint8_t *buf = ops->oobbuf;
+ size_t len = ops->len;
+
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
+
+ ofs += ops->ooboffs;
mutex_lock(&this->lock);
@@ -1077,7 +1011,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
DoC_ReadBuf(this, &buf[len256], len - len256);
- *retlen = len;
+ ops->retlen = len;
/* Reading the full OOB data drops us off of the end of the page,
* causing the flash device to go into busy mode, so we need
* to wait until ready 11.4.1 and Toshiba TC58256FT docs */
@@ -1192,17 +1126,20 @@ static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
}
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t * retlen, const u_char * buf)
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
{
- struct DiskOnChip *this = mtd->priv;
- int ret;
+ struct DiskOnChip *this = mtd->priv;
+ int ret;
- mutex_lock(&this->lock);
- ret = doc_write_oob_nolock(mtd, ofs, len, retlen, buf);
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
+
+ mutex_lock(&this->lock);
+ ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len,
+ &ops->retlen, ops->oobbuf);
- mutex_unlock(&this->lock);
- return ret;
+ mutex_unlock(&this->lock);
+ return ret;
}
static int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
@@ -1277,12 +1214,6 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
*
****************************************************************************/
-static int __init init_doc2000(void)
-{
- inter_module_register(im_name, THIS_MODULE, &DoC2k_init);
- return 0;
-}
-
static void __exit cleanup_doc2000(void)
{
struct mtd_info *mtd;
@@ -1298,11 +1229,9 @@ static void __exit cleanup_doc2000(void)
kfree(this->chips);
kfree(mtd);
}
- inter_module_unregister(im_name);
}
module_exit(cleanup_doc2000);
-module_init(init_doc2000);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 681a9c73a2a..0cf022a69e6 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -43,10 +43,10 @@ static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf, u_char *eccbuf,
struct nand_oobinfo *oobsel);
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, u_char *buf);
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, const u_char *buf);
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops);
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops);
static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
static struct mtd_info *docmillist = NULL;
@@ -324,16 +324,9 @@ static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
return retval;
}
-static const char im_name[] = "DoCMil_init";
-
-/* This routine is made available to other mtd code via
- * inter_module_register. It must only be accessed through
- * inter_module_get which will bump the use count of this module. The
- * addresses passed back in mtd are valid as long as the use count of
- * this module is non-zero, i.e. between inter_module_get and
- * inter_module_put. Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
- */
-static void DoCMil_init(struct mtd_info *mtd)
+/* This routine is found from the docprobe code by symbol_get(),
+ * which will bump the use count of this module. */
+void DoCMil_init(struct mtd_info *mtd)
{
struct DiskOnChip *this = mtd->priv;
struct DiskOnChip *old = NULL;
@@ -368,7 +361,7 @@ static void DoCMil_init(struct mtd_info *mtd)
/* FIXME: erase size is not always 8KiB */
mtd->erasesize = 0x2000;
- mtd->oobblock = 512;
+ mtd->writesize = 512;
mtd->oobsize = 16;
mtd->owner = THIS_MODULE;
mtd->erase = doc_erase;
@@ -376,8 +369,6 @@ static void DoCMil_init(struct mtd_info *mtd)
mtd->unpoint = NULL;
mtd->read = doc_read;
mtd->write = doc_write;
- mtd->read_ecc = doc_read_ecc;
- mtd->write_ecc = doc_write_ecc;
mtd->read_oob = doc_read_oob;
mtd->write_oob = doc_write_oob;
mtd->sync = NULL;
@@ -401,6 +392,7 @@ static void DoCMil_init(struct mtd_info *mtd)
return;
}
}
+EXPORT_SYMBOL_GPL(DoCMil_init);
static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
@@ -670,8 +662,8 @@ static int doc_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
return ret;
}
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, u_char *buf)
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
{
#ifndef USE_MEMCPY
int i;
@@ -680,6 +672,12 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
struct DiskOnChip *this = mtd->priv;
void __iomem *docptr = this->virtadr;
struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+ uint8_t *buf = ops->oobbuf;
+ size_t len = ops->len;
+
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
+
+ ofs += ops->ooboffs;
/* Find the chip which is to be used and select it */
if (this->curfloor != mychip->floor) {
@@ -716,13 +714,13 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
#endif
buf[len - 1] = ReadDOC(docptr, LastDataRead);
- *retlen = len;
+ ops->retlen = len;
return 0;
}
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, const u_char *buf)
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
{
#ifndef USE_MEMCPY
int i;
@@ -732,6 +730,12 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
struct DiskOnChip *this = mtd->priv;
void __iomem *docptr = this->virtadr;
struct Nand *mychip = &this->chips[ofs >> this->chipshift];
+ uint8_t *buf = ops->oobbuf;
+ size_t len = ops->len;
+
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
+
+ ofs += ops->ooboffs;
/* Find the chip which is to be used and select it */
if (this->curfloor != mychip->floor) {
@@ -783,12 +787,12 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
printk("Error programming oob data\n");
/* FIXME: implement Bad Block Replacement (in nftl.c ??) */
- *retlen = 0;
+ ops->retlen = 0;
ret = -EIO;
}
dummy = ReadDOC(docptr, LastDataRead);
- *retlen = len;
+ ops->retlen = len;
return ret;
}
@@ -856,12 +860,6 @@ int doc_erase (struct mtd_info *mtd, struct erase_info *instr)
*
****************************************************************************/
-static int __init init_doc2001(void)
-{
- inter_module_register(im_name, THIS_MODULE, &DoCMil_init);
- return 0;
-}
-
static void __exit cleanup_doc2001(void)
{
struct mtd_info *mtd;
@@ -877,11 +875,9 @@ static void __exit cleanup_doc2001(void)
kfree(this->chips);
kfree(mtd);
}
- inter_module_unregister(im_name);
}
module_exit(cleanup_doc2001);
-module_init(init_doc2001);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 5f57f29efee..66cb1e50469 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -47,10 +47,10 @@ static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf, u_char *eccbuf,
struct nand_oobinfo *oobsel);
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, u_char *buf);
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, const u_char *buf);
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops);
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops);
static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
static struct mtd_info *docmilpluslist = NULL;
@@ -447,16 +447,9 @@ static int DoCMilPlus_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
return retval;
}
-static const char im_name[] = "DoCMilPlus_init";
-
-/* This routine is made available to other mtd code via
- * inter_module_register. It must only be accessed through
- * inter_module_get which will bump the use count of this module. The
- * addresses passed back in mtd are valid as long as the use count of
- * this module is non-zero, i.e. between inter_module_get and
- * inter_module_put. Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
- */
-static void DoCMilPlus_init(struct mtd_info *mtd)
+/* This routine is found from the docprobe code by symbol_get(),
+ * which will bump the use count of this module. */
+void DoCMilPlus_init(struct mtd_info *mtd)
{
struct DiskOnChip *this = mtd->priv;
struct DiskOnChip *old = NULL;
@@ -490,7 +483,7 @@ static void DoCMilPlus_init(struct mtd_info *mtd)
mtd->size = 0;
mtd->erasesize = 0;
- mtd->oobblock = 512;
+ mtd->writesize = 512;
mtd->oobsize = 16;
mtd->owner = THIS_MODULE;
mtd->erase = doc_erase;
@@ -498,8 +491,6 @@ static void DoCMilPlus_init(struct mtd_info *mtd)
mtd->unpoint = NULL;
mtd->read = doc_read;
mtd->write = doc_write;
- mtd->read_ecc = doc_read_ecc;
- mtd->write_ecc = doc_write_ecc;
mtd->read_oob = doc_read_oob;
mtd->write_oob = doc_write_oob;
mtd->sync = NULL;
@@ -524,6 +515,7 @@ static void DoCMilPlus_init(struct mtd_info *mtd)
return;
}
}
+EXPORT_SYMBOL_GPL(DoCMilPlus_init);
#if 0
static int doc_dumpblk(struct mtd_info *mtd, loff_t from)
@@ -876,14 +868,20 @@ static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
return ret;
}
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, u_char *buf)
+static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
{
loff_t fofs, base;
struct DiskOnChip *this = mtd->priv;
void __iomem * docptr = this->virtadr;
struct Nand *mychip = &this->chips[ofs >> this->chipshift];
size_t i, size, got, want;
+ uint8_t *buf = ops->oobbuf;
+ size_t len = ops->len;
+
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
+
+ ofs += ops->ooboffs;
DoC_CheckASIC(docptr);
@@ -949,12 +947,12 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
/* Disable flash internally */
WriteDOC(0, docptr, Mplus_FlashSelect);
- *retlen = len;
+ ops->retlen = len;
return 0;
}
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
- size_t *retlen, const u_char *buf)
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
{
volatile char dummy;
loff_t fofs, base;
@@ -963,6 +961,12 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
struct Nand *mychip = &this->chips[ofs >> this->chipshift];
size_t i, size, got, want;
int ret = 0;
+ uint8_t *buf = ops->oobbuf;
+ size_t len = ops->len;
+
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
+
+ ofs += ops->ooboffs;
DoC_CheckASIC(docptr);
@@ -1038,7 +1042,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
printk("MTD: Error 0x%x programming oob at 0x%x\n",
dummy, (int)ofs);
/* FIXME: implement Bad Block Replacement */
- *retlen = 0;
+ ops->retlen = 0;
ret = -EIO;
}
dummy = ReadDOC(docptr, Mplus_LastDataRead);
@@ -1051,7 +1055,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
/* Disable flash internally */
WriteDOC(0, docptr, Mplus_FlashSelect);
- *retlen = len;
+ ops->retlen = len;
return ret;
}
@@ -1122,12 +1126,6 @@ int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
*
****************************************************************************/
-static int __init init_doc2001plus(void)
-{
- inter_module_register(im_name, THIS_MODULE, &DoCMilPlus_init);
- return 0;
-}
-
static void __exit cleanup_doc2001plus(void)
{
struct mtd_info *mtd;
@@ -1143,11 +1141,9 @@ static void __exit cleanup_doc2001plus(void)
kfree(this->chips);
kfree(mtd);
}
- inter_module_unregister(im_name);
}
module_exit(cleanup_doc2001plus);
-module_init(init_doc2001plus);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com> et al.");
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 13178b9dd00..593bb033a3f 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -231,6 +231,10 @@ static inline int __init doccheck(void __iomem *potential, unsigned long physadr
static int docfound;
+extern void DoC2k_init(struct mtd_info *);
+extern void DoCMil_init(struct mtd_info *);
+extern void DoCMilPlus_init(struct mtd_info *);
+
static void __init DoC_Probe(unsigned long physadr)
{
void __iomem *docptr;
@@ -239,8 +243,6 @@ static void __init DoC_Probe(unsigned long physadr)
int ChipID;
char namebuf[15];
char *name = namebuf;
- char *im_funcname = NULL;
- char *im_modname = NULL;
void (*initroutine)(struct mtd_info *) = NULL;
docptr = ioremap(physadr, DOC_IOREMAP_LEN);
@@ -278,41 +280,33 @@ static void __init DoC_Probe(unsigned long physadr)
switch(ChipID) {
case DOC_ChipID_Doc2kTSOP:
name="2000 TSOP";
- im_funcname = "DoC2k_init";
- im_modname = "doc2000";
+ initroutine = symbol_request(DoC2k_init);
break;
case DOC_ChipID_Doc2k:
name="2000";
- im_funcname = "DoC2k_init";
- im_modname = "doc2000";
+ initroutine = symbol_request(DoC2k_init);
break;
case DOC_ChipID_DocMil:
name="Millennium";
#ifdef DOC_SINGLE_DRIVER
- im_funcname = "DoC2k_init";
- im_modname = "doc2000";
+ initroutine = symbol_request(DoC2k_init);
#else
- im_funcname = "DoCMil_init";
- im_modname = "doc2001";
+ initroutine = symbol_request(DoCMil_init);
#endif /* DOC_SINGLE_DRIVER */
break;
case DOC_ChipID_DocMilPlus16:
case DOC_ChipID_DocMilPlus32:
name="MillenniumPlus";
- im_funcname = "DoCMilPlus_init";
- im_modname = "doc2001plus";
+ initroutine = symbol_request(DoCMilPlus_init);
break;
}
- if (im_funcname)
- initroutine = inter_module_get_request(im_funcname, im_modname);
-
if (initroutine) {
(*initroutine)(mtd);
- inter_module_put(im_funcname);
+ symbol_put_addr(initroutine);
return;
}
printk(KERN_NOTICE "Cannot find driver for DiskOnChip %s at 0x%lX\n", name, physadr);
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 29b0ddaa324..4ea50a1dda8 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -635,6 +635,7 @@ int __init lart_flash_init (void)
printk ("%s: This looks like a LART board to me.\n",module_name);
mtd.name = module_name;
mtd.type = MTD_NORFLASH;
+ mtd.writesize = 1;
mtd.flags = MTD_CAP_NORFLASH;
mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 04e65d5dae0..a8466141e91 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -465,6 +465,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
flash->mtd.name = spi->dev.bus_id;
flash->mtd.type = MTD_NORFLASH;
+ flash->mtd.writesize = 1;
flash->mtd.flags = MTD_CAP_NORFLASH;
flash->mtd.size = info->sector_size * info->n_sectors;
flash->mtd.erasesize = info->sector_size;
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 485f663493d..4ab7670770e 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -219,7 +219,7 @@ static int __init ms02nv_init_one(ulong addr)
mp->uaddr = phys_to_virt(fixaddr);
mtd->type = MTD_RAM;
- mtd->flags = MTD_CAP_RAM | MTD_XIP;
+ mtd->flags = MTD_CAP_RAM;
mtd->size = fixsize;
mtd->name = (char *)ms02nv_name;
mtd->owner = THIS_MODULE;
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index 1443117fd8f..b4438eacfd8 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -106,6 +106,7 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
mtd->type = MTD_RAM;
mtd->flags = MTD_CAP_RAM;
mtd->size = size;
+ mtd->writesize = 1;
mtd->erasesize = MTDRAM_ERASE_SIZE;
mtd->priv = mapped_address;
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index e8685ee6c1e..e09e416667d 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -1,8 +1,8 @@
/**
* $Id: phram.c,v 1.16 2005/11/07 11:14:25 gleixner Exp $
*
- * Copyright (c) ???? Jochen Schäuble <psionic@psionic.de>
- * Copyright (c) 2003-2004 Jörn Engel <joern@wh.fh-wedel.de>
+ * Copyright (c) ???? Jochen Schäuble <psionic@psionic.de>
+ * Copyright (c) 2003-2004 Jörn Engel <joern@wh.fh-wedel.de>
*
* Usage:
*
@@ -142,7 +142,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
new->mtd.name = name;
new->mtd.size = len;
- new->mtd.flags = MTD_CAP_RAM | MTD_ERASEABLE | MTD_VOLATILE;
+ new->mtd.flags = MTD_CAP_RAM;
new->mtd.erase = phram_erase;
new->mtd.point = phram_point;
new->mtd.unpoint = phram_unpoint;
@@ -266,12 +266,16 @@ static int phram_setup(const char *val, struct kernel_param *kp)
return 0;
ret = parse_num32(&start, token[1]);
- if (ret)
+ if (ret) {
+ kfree(name);
parse_err("illegal start address\n");
+ }
ret = parse_num32(&len, token[2]);
- if (ret)
+ if (ret) {
+ kfree(name);
parse_err("illegal device length\n");
+ }
register_device(name, start, len);
@@ -296,5 +300,5 @@ module_init(init_phram);
module_exit(cleanup_phram);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jörn Engel <joern@wh.fh-wedel.de>");
+MODULE_AUTHOR("Jörn Engel <joern@wh.fh-wedel.de>");
MODULE_DESCRIPTION("MTD driver for physical RAM");
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 6faee6c6958..b3f665e3c38 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -200,8 +200,7 @@ static int register_device(char *name, unsigned long start, unsigned long length
(*curmtd)->mtdinfo->name = name;
(*curmtd)->mtdinfo->size = length;
- (*curmtd)->mtdinfo->flags = MTD_CLEAR_BITS | MTD_SET_BITS |
- MTD_WRITEB_WRITEABLE | MTD_VOLATILE | MTD_CAP_RAM;
+ (*curmtd)->mtdinfo->flags = MTD_CAP_RAM;
(*curmtd)->mtdinfo->erase = slram_erase;
(*curmtd)->mtdinfo->point = slram_point;
(*curmtd)->mtdinfo->unpoint = slram_unpoint;
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index a3b92479719..1e21a2c3dd2 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -36,6 +36,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nftl.h>
#include <linux/mtd/inftl.h>
+#include <linux/mtd/nand.h>
#include <asm/uaccess.h>
#include <asm/errno.h>
#include <asm/io.h>
@@ -79,14 +80,12 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
inftl->mbd.devnum = -1;
inftl->mbd.blksize = 512;
inftl->mbd.tr = tr;
- memcpy(&inftl->oobinfo, &mtd->oobinfo, sizeof(struct nand_oobinfo));
- inftl->oobinfo.useecc = MTD_NANDECC_PLACEONLY;
- if (INFTL_mount(inftl) < 0) {
+ if (INFTL_mount(inftl) < 0) {
printk(KERN_WARNING "INFTL: could not mount device\n");
kfree(inftl);
return;
- }
+ }
/* OK, it's a new one. Set up all the data structures. */
@@ -152,6 +151,69 @@ static void inftl_remove_dev(struct mtd_blktrans_dev *dev)
*/
/*
+ * Read oob data from flash
+ */
+int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf)
+{
+ struct mtd_oob_ops ops;
+ int res;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooblen = len;
+ ops.oobbuf = buf;
+ ops.datbuf = NULL;
+ ops.len = len;
+
+ res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ *retlen = ops.retlen;
+ return res;
+}
+
+/*
+ * Write oob data to flash
+ */
+int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf)
+{
+ struct mtd_oob_ops ops;
+ int res;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooblen = len;
+ ops.oobbuf = buf;
+ ops.datbuf = NULL;
+ ops.len = len;
+
+ res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ *retlen = ops.retlen;
+ return res;
+}
+
+/*
+ * Write data and oob to flash
+ */
+static int inftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf, uint8_t *oob)
+{
+ struct mtd_oob_ops ops;
+ int res;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = offs;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = oob;
+ ops.datbuf = buf;
+ ops.len = len;
+
+ res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ *retlen = ops.retlen;
+ return res;
+}
+
+/*
* INFTL_findfreeblock: Find a free Erase Unit on the INFTL partition.
* This function is used when the give Virtual Unit Chain.
*/
@@ -198,10 +260,11 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
u16 BlockMap[MAX_SECTORS_PER_UNIT];
unsigned char BlockDeleted[MAX_SECTORS_PER_UNIT];
unsigned int thisEUN, prevEUN, status;
+ struct mtd_info *mtd = inftl->mbd.mtd;
int block, silly;
unsigned int targetEUN;
struct inftl_oob oob;
- size_t retlen;
+ size_t retlen;
DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,"
"pending=%d)\n", inftl, thisVUC, pendingblock);
@@ -221,18 +284,18 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
* Scan to find the Erase Unit which holds the actual data for each
* 512-byte block within the Chain.
*/
- silly = MAX_LOOPS;
+ silly = MAX_LOOPS;
while (thisEUN < inftl->nb_blocks) {
for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) {
if ((BlockMap[block] != 0xffff) || BlockDeleted[block])
continue;
- if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize)
- + (block * SECTORSIZE), 16 , &retlen,
- (char *)&oob) < 0)
+ if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize)
+ + (block * SECTORSIZE), 16, &retlen,
+ (char *)&oob) < 0)
status = SECTOR_IGNORE;
else
- status = oob.b.Status | oob.b.Status1;
+ status = oob.b.Status | oob.b.Status1;
switch(status) {
case SECTOR_FREE:
@@ -282,29 +345,31 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
continue;
}
- /*
+ /*
* Copy only in non free block (free blocks can only
* happen in case of media errors or deleted blocks).
*/
- if (BlockMap[block] == BLOCK_NIL)
- continue;
-
- ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize *
- BlockMap[block]) + (block * SECTORSIZE), SECTORSIZE,
- &retlen, movebuf);
- if (ret < 0) {
- ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize *
- BlockMap[block]) + (block * SECTORSIZE),
- SECTORSIZE, &retlen, movebuf);
+ if (BlockMap[block] == BLOCK_NIL)
+ continue;
+
+ ret = mtd->read(mtd, (inftl->EraseSize * BlockMap[block]) +
+ (block * SECTORSIZE), SECTORSIZE, &retlen,
+ movebuf);
+ if (ret < 0 && ret != -EUCLEAN) {
+ ret = mtd->read(mtd,
+ (inftl->EraseSize * BlockMap[block]) +
+ (block * SECTORSIZE), SECTORSIZE,
+ &retlen, movebuf);
if (ret != -EIO)
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
- "away on retry?\n");
- }
- memset(&oob, 0xff, sizeof(struct inftl_oob));
- oob.b.Status = oob.b.Status1 = SECTOR_USED;
- MTD_WRITEECC(inftl->mbd.mtd, (inftl->EraseSize * targetEUN) +
- (block * SECTORSIZE), SECTORSIZE, &retlen,
- movebuf, (char *)&oob, &inftl->oobinfo);
+ DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
+ "away on retry?\n");
+ }
+ memset(&oob, 0xff, sizeof(struct inftl_oob));
+ oob.b.Status = oob.b.Status1 = SECTOR_USED;
+
+ inftl_write(inftl->mbd.mtd, (inftl->EraseSize * targetEUN) +
+ (block * SECTORSIZE), SECTORSIZE, &retlen,
+ movebuf, (char *)&oob);
}
/*
@@ -329,17 +394,17 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
if (thisEUN == targetEUN)
break;
- if (INFTL_formatblock(inftl, thisEUN) < 0) {
+ if (INFTL_formatblock(inftl, thisEUN) < 0) {
/*
* Could not erase : mark block as reserved.
*/
inftl->PUtable[thisEUN] = BLOCK_RESERVED;
- } else {
+ } else {
/* Correctly erased : mark it as free */
inftl->PUtable[thisEUN] = BLOCK_FREE;
inftl->PUtable[prevEUN] = BLOCK_NIL;
inftl->numfreeEUNs++;
- }
+ }
}
return targetEUN;
@@ -415,6 +480,7 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
unsigned int thisVUC = block / (inftl->EraseSize / SECTORSIZE);
unsigned int thisEUN, writeEUN, prev_block, status;
unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize -1);
+ struct mtd_info *mtd = inftl->mbd.mtd;
struct inftl_oob oob;
struct inftl_bci bci;
unsigned char anac, nacs, parity;
@@ -434,10 +500,10 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
silly = MAX_LOOPS;
while (thisEUN <= inftl->lastEUN) {
- MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) +
- blockofs, 8, &retlen, (char *)&bci);
+ inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) +
+ blockofs, 8, &retlen, (char *)&bci);
- status = bci.Status | bci.Status1;
+ status = bci.Status | bci.Status1;
DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in "
"EUN %d is %x\n", block , writeEUN, status);
@@ -522,8 +588,8 @@ hitused:
nacs = 0;
thisEUN = inftl->VUtable[thisVUC];
if (thisEUN != BLOCK_NIL) {
- MTD_READOOB(inftl->mbd.mtd, thisEUN * inftl->EraseSize
- + 8, 8, &retlen, (char *)&oob.u);
+ inftl_read_oob(mtd, thisEUN * inftl->EraseSize
+ + 8, 8, &retlen, (char *)&oob.u);
anac = oob.u.a.ANAC + 1;
nacs = oob.u.a.NACs + 1;
}
@@ -544,8 +610,8 @@ hitused:
oob.u.a.parityPerField = parity;
oob.u.a.discarded = 0xaa;
- MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize + 8, 8,
- &retlen, (char *)&oob.u);
+ inftl_write_oob(mtd, writeEUN * inftl->EraseSize + 8, 8,
+ &retlen, (char *)&oob.u);
/* Also back up header... */
oob.u.b.virtualUnitNo = cpu_to_le16(thisVUC);
@@ -555,8 +621,8 @@ hitused:
oob.u.b.parityPerField = parity;
oob.u.b.discarded = 0xaa;
- MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize +
- SECTORSIZE * 4 + 8, 8, &retlen, (char *)&oob.u);
+ inftl_write_oob(mtd, writeEUN * inftl->EraseSize +
+ SECTORSIZE * 4 + 8, 8, &retlen, (char *)&oob.u);
inftl->PUtable[writeEUN] = inftl->VUtable[thisVUC];
inftl->VUtable[thisVUC] = writeEUN;
@@ -576,6 +642,7 @@ hitused:
*/
static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
{
+ struct mtd_info *mtd = inftl->mbd.mtd;
unsigned char BlockUsed[MAX_SECTORS_PER_UNIT];
unsigned char BlockDeleted[MAX_SECTORS_PER_UNIT];
unsigned int thisEUN, status;
@@ -606,9 +673,9 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
if (BlockUsed[block] || BlockDeleted[block])
continue;
- if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize)
- + (block * SECTORSIZE), 8 , &retlen,
- (char *)&bci) < 0)
+ if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize)
+ + (block * SECTORSIZE), 8 , &retlen,
+ (char *)&bci) < 0)
status = SECTOR_IGNORE;
else
status = bci.Status | bci.Status1;
@@ -670,12 +737,12 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n",
thisEUN, thisVUC);
- if (INFTL_formatblock(inftl, thisEUN) < 0) {
+ if (INFTL_formatblock(inftl, thisEUN) < 0) {
/*
* Could not erase : mark block as reserved.
*/
inftl->PUtable[thisEUN] = BLOCK_RESERVED;
- } else {
+ } else {
/* Correctly erased : mark it as free */
inftl->PUtable[thisEUN] = BLOCK_FREE;
inftl->numfreeEUNs++;
@@ -697,6 +764,7 @@ static int INFTL_deleteblock(struct INFTLrecord *inftl, unsigned block)
{
unsigned int thisEUN = inftl->VUtable[block / (inftl->EraseSize / SECTORSIZE)];
unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize - 1);
+ struct mtd_info *mtd = inftl->mbd.mtd;
unsigned int status;
int silly = MAX_LOOPS;
size_t retlen;
@@ -706,8 +774,8 @@ static int INFTL_deleteblock(struct INFTLrecord *inftl, unsigned block)
"block=%d)\n", inftl, block);
while (thisEUN < inftl->nb_blocks) {
- if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) +
- blockofs, 8, &retlen, (char *)&bci) < 0)
+ if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) +
+ blockofs, 8, &retlen, (char *)&bci) < 0)
status = SECTOR_IGNORE;
else
status = bci.Status | bci.Status1;
@@ -741,10 +809,10 @@ foundit:
if (thisEUN != BLOCK_NIL) {
loff_t ptr = (thisEUN * inftl->EraseSize) + blockofs;
- if (MTD_READOOB(inftl->mbd.mtd, ptr, 8, &retlen, (char *)&bci) < 0)
+ if (inftl_read_oob(mtd, ptr, 8, &retlen, (char *)&bci) < 0)
return -EIO;
bci.Status = bci.Status1 = SECTOR_DELETED;
- if (MTD_WRITEOOB(inftl->mbd.mtd, ptr, 8, &retlen, (char *)&bci) < 0)
+ if (inftl_write_oob(mtd, ptr, 8, &retlen, (char *)&bci) < 0)
return -EIO;
INFTL_trydeletechain(inftl, block / (inftl->EraseSize / SECTORSIZE));
}
@@ -784,9 +852,10 @@ static int inftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
memset(&oob, 0xff, sizeof(struct inftl_oob));
oob.b.Status = oob.b.Status1 = SECTOR_USED;
- MTD_WRITEECC(inftl->mbd.mtd, (writeEUN * inftl->EraseSize) +
- blockofs, SECTORSIZE, &retlen, (char *)buffer,
- (char *)&oob, &inftl->oobinfo);
+
+ inftl_write(inftl->mbd.mtd, (writeEUN * inftl->EraseSize) +
+ blockofs, SECTORSIZE, &retlen, (char *)buffer,
+ (char *)&oob);
/*
* need to write SECTOR_USED flags since they are not written
* in mtd_writeecc
@@ -804,17 +873,18 @@ static int inftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
struct INFTLrecord *inftl = (void *)mbd;
unsigned int thisEUN = inftl->VUtable[block / (inftl->EraseSize / SECTORSIZE)];
unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize - 1);
- unsigned int status;
+ struct mtd_info *mtd = inftl->mbd.mtd;
+ unsigned int status;
int silly = MAX_LOOPS;
- struct inftl_bci bci;
+ struct inftl_bci bci;
size_t retlen;
DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld,"
"buffer=%p)\n", inftl, block, buffer);
while (thisEUN < inftl->nb_blocks) {
- if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) +
- blockofs, 8, &retlen, (char *)&bci) < 0)
+ if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) +
+ blockofs, 8, &retlen, (char *)&bci) < 0)
status = SECTOR_IGNORE;
else
status = bci.Status | bci.Status1;
@@ -850,10 +920,12 @@ foundit:
/* The requested block is not on the media, return all 0x00 */
memset(buffer, 0, SECTORSIZE);
} else {
- size_t retlen;
+ size_t retlen;
loff_t ptr = (thisEUN * inftl->EraseSize) + blockofs;
- if (MTD_READ(inftl->mbd.mtd, ptr, SECTORSIZE, &retlen,
- buffer))
+ int ret = mtd->read(mtd, ptr, SECTORSIZE, &retlen, buffer);
+
+ /* Handle corrected bit flips gracefully */
+ if (ret < 0 && ret != -EUCLEAN)
return -EIO;
}
return 0;
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 43fdc943388..8f6006f1a51 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -43,6 +43,11 @@
char inftlmountrev[]="$Revision: 1.18 $";
+extern int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+extern int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+
/*
* find_boot_record: Find the INFTL Media Header and its Spare copy which
* contains the various device information of the INFTL partition and
@@ -57,6 +62,7 @@ static int find_boot_record(struct INFTLrecord *inftl)
unsigned int i, block;
u8 buf[SECTORSIZE];
struct INFTLMediaHeader *mh = &inftl->MediaHdr;
+ struct mtd_info *mtd = inftl->mbd.mtd;
struct INFTLPartition *ip;
size_t retlen;
@@ -80,8 +86,8 @@ static int find_boot_record(struct INFTLrecord *inftl)
* Check for BNAND header first. Then whinge if it's found
* but later checks fail.
*/
- ret = MTD_READ(inftl->mbd.mtd, block * inftl->EraseSize,
- SECTORSIZE, &retlen, buf);
+ ret = mtd->read(mtd, block * inftl->EraseSize,
+ SECTORSIZE, &retlen, buf);
/* We ignore ret in case the ECC of the MediaHeader is invalid
(which is apparently acceptable) */
if (retlen != SECTORSIZE) {
@@ -106,8 +112,9 @@ static int find_boot_record(struct INFTLrecord *inftl)
}
/* To be safer with BIOS, also use erase mark as discriminant */
- if ((ret = MTD_READOOB(inftl->mbd.mtd, block * inftl->EraseSize +
- SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0)) {
+ if ((ret = inftl_read_oob(mtd, block * inftl->EraseSize +
+ SECTORSIZE + 8, 8, &retlen,
+ (char *)&h1) < 0)) {
printk(KERN_WARNING "INFTL: ANAND header found at "
"0x%x in mtd%d, but OOB data read failed "
"(err %d)\n", block * inftl->EraseSize,
@@ -123,8 +130,8 @@ static int find_boot_record(struct INFTLrecord *inftl)
memcpy(mh, buf, sizeof(struct INFTLMediaHeader));
/* Read the spare media header at offset 4096 */
- MTD_READ(inftl->mbd.mtd, block * inftl->EraseSize + 4096,
- SECTORSIZE, &retlen, buf);
+ mtd->read(mtd, block * inftl->EraseSize + 4096,
+ SECTORSIZE, &retlen, buf);
if (retlen != SECTORSIZE) {
printk(KERN_WARNING "INFTL: Unable to read spare "
"Media Header\n");
@@ -233,7 +240,7 @@ static int find_boot_record(struct INFTLrecord *inftl)
*/
instr->addr = ip->Reserved0 * inftl->EraseSize;
instr->len = inftl->EraseSize;
- MTD_ERASE(inftl->mbd.mtd, instr);
+ mtd->erase(mtd, instr);
}
if ((ip->lastUnit - ip->firstUnit + 1) < ip->virtualUnits) {
printk(KERN_WARNING "INFTL: Media Header "
@@ -350,21 +357,21 @@ static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address,
int len, int check_oob)
{
u8 buf[SECTORSIZE + inftl->mbd.mtd->oobsize];
+ struct mtd_info *mtd = inftl->mbd.mtd;
size_t retlen;
int i;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: check_free_sectors(inftl=%p,"
- "address=0x%x,len=%d,check_oob=%d)\n", inftl,
- address, len, check_oob);
-
for (i = 0; i < len; i += SECTORSIZE) {
- if (MTD_READECC(inftl->mbd.mtd, address, SECTORSIZE, &retlen, buf, &buf[SECTORSIZE], &inftl->oobinfo) < 0)
+ if (mtd->read(mtd, address, SECTORSIZE, &retlen, buf))
return -1;
if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
return -1;
if (check_oob) {
- if (memcmpb(buf + SECTORSIZE, 0xff, inftl->mbd.mtd->oobsize) != 0)
+ if(inftl_read_oob(mtd, address, mtd->oobsize,
+ &retlen, &buf[SECTORSIZE]) < 0)
+ return -1;
+ if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0)
return -1;
}
address += SECTORSIZE;
@@ -387,6 +394,7 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
size_t retlen;
struct inftl_unittail uci;
struct erase_info *instr = &inftl->instr;
+ struct mtd_info *mtd = inftl->mbd.mtd;
int physblock;
DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p,"
@@ -404,8 +412,9 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
/* Erase one physical eraseblock at a time, even though the NAND api
allows us to group them. This way we if we have a failure, we can
mark only the failed block in the bbt. */
- for (physblock = 0; physblock < inftl->EraseSize; physblock += instr->len, instr->addr += instr->len) {
- MTD_ERASE(inftl->mbd.mtd, instr);
+ for (physblock = 0; physblock < inftl->EraseSize;
+ physblock += instr->len, instr->addr += instr->len) {
+ mtd->erase(inftl->mbd.mtd, instr);
if (instr->state == MTD_ERASE_FAILED) {
printk(KERN_WARNING "INFTL: error while formatting block %d\n",
@@ -414,10 +423,10 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
}
/*
- * Check the "freeness" of Erase Unit before updating metadata.
- * FixMe: is this check really necessary? Since we have check the
- * return code after the erase operation.
- */
+ * Check the "freeness" of Erase Unit before updating metadata.
+ * FixMe: is this check really necessary? Since we have check
+ * the return code after the erase operation.
+ */
if (check_free_sectors(inftl, instr->addr, instr->len, 1) != 0)
goto fail;
}
@@ -429,8 +438,7 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
uci.Reserved[2] = 0;
uci.Reserved[3] = 0;
instr->addr = block * inftl->EraseSize + SECTORSIZE * 2;
- if (MTD_WRITEOOB(inftl->mbd.mtd, instr->addr +
- 8, 8, &retlen, (char *)&uci) < 0)
+ if (inftl_write_oob(mtd, instr->addr + 8, 8, &retlen, (char *)&uci) < 0)
goto fail;
return 0;
fail:
@@ -549,6 +557,7 @@ void INFTL_dumpVUchains(struct INFTLrecord *s)
int INFTL_mount(struct INFTLrecord *s)
{
+ struct mtd_info *mtd = s->mbd.mtd;
unsigned int block, first_block, prev_block, last_block;
unsigned int first_logical_block, logical_block, erase_mark;
int chain_length, do_format_chain;
@@ -607,10 +616,11 @@ int INFTL_mount(struct INFTLrecord *s)
break;
}
- if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8,
- 8, &retlen, (char *)&h0) < 0 ||
- MTD_READOOB(s->mbd.mtd, block * s->EraseSize +
- 2 * SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0) {
+ if (inftl_read_oob(mtd, block * s->EraseSize + 8,
+ 8, &retlen, (char *)&h0) < 0 ||
+ inftl_read_oob(mtd, block * s->EraseSize +
+ 2 * SECTORSIZE + 8, 8, &retlen,
+ (char *)&h1) < 0) {
/* Should never happen? */
do_format_chain++;
break;
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7abd7fee0dd..6bdaacc6d6f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -37,7 +37,7 @@ config MTD_PHYSMAP_START
config MTD_PHYSMAP_LEN
hex "Physical length of flash mapping"
depends on MTD_PHYSMAP
- default "0x4000000"
+ default "0"
help
This is the total length of the mapping of the flash chips on
your particular board. If there is space, or aliases, in the
@@ -78,7 +78,7 @@ config MTD_PNC2000
config MTD_SC520CDP
tristate "CFI Flash device mapped on AMD SC520 CDP"
- depends on X86 && MTD_CFI
+ depends on X86 && MTD_CFI && MTD_CONCAT
help
The SC520 CDP board has two banks of CFI-compliant chips and one
Dual-in-line JEDEC chip. This 'mapping' driver supports that
@@ -109,7 +109,7 @@ config MTD_TS5500
mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
Note that jumper 3 ("Write Enable Drive A") must be set
- otherwise detection won't succeeed.
+ otherwise detection won't succeed.
config MTD_SBC_GXX
tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
@@ -200,8 +200,8 @@ config MTD_TSUNAMI
Support for the flash chip on Tsunami TIG bus.
config MTD_LASAT
- tristate "Flash chips on LASAT board"
- depends on LASAT
+ tristate "LASAT flash device"
+ depends on LASAT && MTD_CFI
help
Support for the flash chips on the Lasat 100 and 200 boards.
@@ -561,7 +561,6 @@ config MTD_PCMCIA
config MTD_PCMCIA_ANONYMOUS
bool "Use PCMCIA MTD drivers for anonymous PCMCIA cards"
depends on MTD_PCMCIA
- default N
help
If this option is enabled, PCMCIA cards which do not report
anything about themselves are assumed to be MTD cards.
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index fd0f0d3187d..92b5d883d7b 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -1,5 +1,5 @@
/*
- * Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson <kd@flaga.is>
+ * Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson <kd@flaga.is>
*
* $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $
*
@@ -135,5 +135,5 @@ module_exit(cleanup_flagadm);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kári Davíðsson <kd@flaga.is>");
+MODULE_AUTHOR("Kári Davíðsson <kd@flaga.is>");
MODULE_DESCRIPTION("MTD map driver for Flaga digital module");
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index 652813cd6c2..85c2a9e22b1 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -122,5 +122,5 @@ module_exit(cleanup_dbox2_flash);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kári Davíðsson <kd@flaga.is>, Bastian Blank <waldi@tuxbox.org>, Alexander Wild <wild@te-elektronik.com>");
+MODULE_AUTHOR("Kári Davíðsson <kd@flaga.is>, Bastian Blank <waldi@tuxbox.org>, Alexander Wild <wild@te-elektronik.com>");
MODULE_DESCRIPTION("MTD map driver for D-Box 2 board");
diff --git a/drivers/mtd/maps/mtx-1_flash.c b/drivers/mtd/maps/mtx-1_flash.c
index d1e66e18674..5c25d4e552c 100644
--- a/drivers/mtd/maps/mtx-1_flash.c
+++ b/drivers/mtd/maps/mtx-1_flash.c
@@ -4,7 +4,7 @@
* $Id: mtx-1_flash.c,v 1.2 2005/11/07 11:14:27 gleixner Exp $
*
* (C) 2005 Bruno Randolf <bruno.randolf@4g-systems.biz>
- * (C) 2005 Jörn Engel <joern@wohnheim.fh-wedel.de>
+ * (C) 2005 Jörn Engel <joern@wohnheim.fh-wedel.de>
*
*/
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 54a3102ab19..0994b5b2e33 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -20,6 +20,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/cfi.h>
#include <linux/reboot.h>
+#include <linux/kdev_t.h>
+#include <linux/root_dev.h>
#include <asm/io.h>
/****************************************************************************/
@@ -188,7 +190,7 @@ int nettel_eraseconfig(void)
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&wait_q, &wait);
- ret = MTD_ERASE(mtd, &nettel_erase);
+ ret = mtd->erase(mtd, &nettel_erase);
if (ret) {
set_current_state(TASK_RUNNING);
remove_wait_queue(&wait_q, &wait);
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index d27f4129afd..c861134cbc4 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -713,6 +713,7 @@ static void pcmciamtd_detach(struct pcmcia_device *link)
if(dev->mtd_info) {
del_mtd_device(dev->mtd_info);
+ map_destroy(dev->mtd_info);
info("mtd%d: Removed", dev->mtd_info->index);
}
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index f49ebc3c460..433c3cac3ca 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -14,112 +14,229 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/config.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <asm/io.h>
-static struct mtd_info *mymtd;
-
-struct map_info physmap_map = {
- .name = "phys_mapped_flash",
- .phys = CONFIG_MTD_PHYSMAP_START,
- .size = CONFIG_MTD_PHYSMAP_LEN,
- .bankwidth = CONFIG_MTD_PHYSMAP_BANKWIDTH,
+struct physmap_flash_info {
+ struct mtd_info *mtd;
+ struct map_info map;
+ struct resource *res;
+#ifdef CONFIG_MTD_PARTITIONS
+ int nr_parts;
+ struct mtd_partition *parts;
+#endif
};
+
+static int physmap_flash_remove(struct platform_device *dev)
+{
+ struct physmap_flash_info *info;
+ struct physmap_flash_data *physmap_data;
+
+ info = platform_get_drvdata(dev);
+ if (info == NULL)
+ return 0;
+ platform_set_drvdata(dev, NULL);
+
+ physmap_data = dev->dev.platform_data;
+
+ if (info->mtd != NULL) {
#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition *mtd_parts;
-static int mtd_parts_nb;
+ if (info->nr_parts) {
+ del_mtd_partitions(info->mtd);
+ kfree(info->parts);
+ } else if (physmap_data->nr_parts) {
+ del_mtd_partitions(info->mtd);
+ } else {
+ del_mtd_device(info->mtd);
+ }
+#else
+ del_mtd_device(info->mtd);
+#endif
+ map_destroy(info->mtd);
+ }
-static int num_physmap_partitions;
-static struct mtd_partition *physmap_partitions;
+ if (info->map.virt != NULL)
+ iounmap((void *)info->map.virt);
-static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
+ if (info->res != NULL) {
+ release_resource(info->res);
+ kfree(info->res);
+ }
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
-{
- physmap_partitions=parts;
- num_physmap_partitions=num_parts;
+ return 0;
}
-#endif /* CONFIG_MTD_PARTITIONS */
-static int __init init_physmap(void)
+static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+static int physmap_flash_probe(struct platform_device *dev)
{
- static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
- const char **type;
+ struct physmap_flash_data *physmap_data;
+ struct physmap_flash_info *info;
+ const char **probe_type;
+ int err;
+
+ physmap_data = dev->dev.platform_data;
+ if (physmap_data == NULL)
+ return -ENODEV;
+
+ printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
+ (unsigned long long)dev->resource->end - dev->resource->start + 1,
+ (unsigned long long)dev->resource->start);
+
+ info = kmalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+ if (info == NULL) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ memset(info, 0, sizeof(*info));
- printk(KERN_NOTICE "physmap flash device: %lx at %lx\n", physmap_map.size, physmap_map.phys);
- physmap_map.virt = ioremap(physmap_map.phys, physmap_map.size);
+ platform_set_drvdata(dev, info);
- if (!physmap_map.virt) {
- printk("Failed to ioremap\n");
- return -EIO;
+ info->res = request_mem_region(dev->resource->start,
+ dev->resource->end - dev->resource->start + 1,
+ dev->dev.bus_id);
+ if (info->res == NULL) {
+ dev_err(&dev->dev, "Could not reserve memory region\n");
+ err = -ENOMEM;
+ goto err_out;
}
- simple_map_init(&physmap_map);
+ info->map.name = dev->dev.bus_id;
+ info->map.phys = dev->resource->start;
+ info->map.size = dev->resource->end - dev->resource->start + 1;
+ info->map.bankwidth = physmap_data->width;
+ info->map.set_vpp = physmap_data->set_vpp;
+
+ info->map.virt = ioremap(info->map.phys, info->map.size);
+ if (info->map.virt == NULL) {
+ dev_err(&dev->dev, "Failed to ioremap flash region\n");
+ err = EIO;
+ goto err_out;
+ }
- mymtd = NULL;
- type = rom_probe_types;
- for(; !mymtd && *type; type++) {
- mymtd = do_map_probe(*type, &physmap_map);
+ simple_map_init(&info->map);
+
+ probe_type = rom_probe_types;
+ for (; info->mtd == NULL && *probe_type != NULL; probe_type++)
+ info->mtd = do_map_probe(*probe_type, &info->map);
+ if (info->mtd == NULL) {
+ dev_err(&dev->dev, "map_probe failed\n");
+ err = -ENXIO;
+ goto err_out;
}
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
+ info->mtd->owner = THIS_MODULE;
#ifdef CONFIG_MTD_PARTITIONS
- mtd_parts_nb = parse_mtd_partitions(mymtd, part_probes,
- &mtd_parts, 0);
+ err = parse_mtd_partitions(info->mtd, part_probe_types, &info->parts, 0);
+ if (err > 0) {
+ add_mtd_partitions(info->mtd, info->parts, err);
+ return 0;
+ }
- if (mtd_parts_nb > 0)
- {
- add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb);
- return 0;
- }
+ if (physmap_data->nr_parts) {
+ printk(KERN_NOTICE "Using physmap partition information\n");
+ add_mtd_partitions(info->mtd, physmap_data->parts,
+ physmap_data->nr_parts);
+ return 0;
+ }
+#endif
+
+ add_mtd_device(info->mtd);
+ return 0;
+
+err_out:
+ physmap_flash_remove(dev);
+ return err;
+}
+
+static struct platform_driver physmap_flash_driver = {
+ .probe = physmap_flash_probe,
+ .remove = physmap_flash_remove,
+ .driver = {
+ .name = "physmap-flash",
+ },
+};
- if (num_physmap_partitions != 0)
- {
- printk(KERN_NOTICE
- "Using physmap partition definition\n");
- add_mtd_partitions (mymtd, physmap_partitions, num_physmap_partitions);
- return 0;
- }
+#ifdef CONFIG_MTD_PHYSMAP_LEN
+#if CONFIG_MTD_PHYSMAP_LEN != 0
+#warning using PHYSMAP compat code
+#define PHYSMAP_COMPAT
+#endif
#endif
- add_mtd_device(mymtd);
- return 0;
- }
+#ifdef PHYSMAP_COMPAT
+static struct physmap_flash_data physmap_flash_data = {
+ .width = CONFIG_MTD_PHYSMAP_BANKWIDTH,
+};
- iounmap(physmap_map.virt);
- return -ENXIO;
-}
+static struct resource physmap_flash_resource = {
+ .start = CONFIG_MTD_PHYSMAP_START,
+ .end = CONFIG_MTD_PHYSMAP_START + CONFIG_MTD_PHYSMAP_LEN,
+ .flags = IORESOURCE_MEM,
+};
-static void __exit cleanup_physmap(void)
+static struct platform_device physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &physmap_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &physmap_flash_resource,
+};
+
+void physmap_configure(unsigned long addr, unsigned long size,
+ int bankwidth, void (*set_vpp)(struct map_info *, int))
{
+ physmap_flash_resource.start = addr;
+ physmap_flash_resource.end = addr + size - 1;
+ physmap_flash_data.width = bankwidth;
+ physmap_flash_data.set_vpp = set_vpp;
+}
+
#ifdef CONFIG_MTD_PARTITIONS
- if (mtd_parts_nb) {
- del_mtd_partitions(mymtd);
- kfree(mtd_parts);
- } else if (num_physmap_partitions) {
- del_mtd_partitions(mymtd);
- } else {
- del_mtd_device(mymtd);
- }
-#else
- del_mtd_device(mymtd);
+void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
+{
+ physmap_flash_data.nr_parts = num_parts;
+ physmap_flash_data.parts = parts;
+}
+#endif
#endif
- map_destroy(mymtd);
- iounmap(physmap_map.virt);
- physmap_map.virt = NULL;
+static int __init physmap_init(void)
+{
+ int err;
+
+ err = platform_driver_register(&physmap_flash_driver);
+#ifdef PHYSMAP_COMPAT
+ if (err == 0)
+ platform_device_register(&physmap_flash);
+#endif
+
+ return err;
}
-module_init(init_physmap);
-module_exit(cleanup_physmap);
+static void __exit physmap_exit(void)
+{
+#ifdef PHYSMAP_COMPAT
+ platform_device_unregister(&physmap_flash);
+#endif
+ platform_driver_unregister(&physmap_flash_driver);
+}
+module_init(physmap_init);
+module_exit(physmap_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 2cef280e388..e5c78463ebf 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -71,7 +71,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos,
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&wait_q, &wait);
- ret = MTD_ERASE(mtd, &erase);
+ ret = mtd->erase(mtd, &erase);
if (ret) {
set_current_state(TASK_RUNNING);
remove_wait_queue(&wait_q, &wait);
@@ -88,7 +88,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos,
* Next, writhe data to flash.
*/
- ret = MTD_WRITE (mtd, pos, len, &retlen, buf);
+ ret = mtd->write(mtd, pos, len, &retlen, buf);
if (ret)
return ret;
if (retlen != len)
@@ -138,7 +138,7 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos,
mtd->name, pos, len);
if (!sect_size)
- return MTD_WRITE (mtd, pos, len, &retlen, buf);
+ return mtd->write(mtd, pos, len, &retlen, buf);
while (len > 0) {
unsigned long sect_start = (pos/sect_size)*sect_size;
@@ -170,7 +170,8 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos,
mtdblk->cache_offset != sect_start) {
/* fill the cache with the current sector */
mtdblk->cache_state = STATE_EMPTY;
- ret = MTD_READ(mtd, sect_start, sect_size, &retlen, mtdblk->cache_data);
+ ret = mtd->read(mtd, sect_start, sect_size,
+ &retlen, mtdblk->cache_data);
if (ret)
return ret;
if (retlen != sect_size)
@@ -207,7 +208,7 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
mtd->name, pos, len);
if (!sect_size)
- return MTD_READ (mtd, pos, len, &retlen, buf);
+ return mtd->read(mtd, pos, len, &retlen, buf);
while (len > 0) {
unsigned long sect_start = (pos/sect_size)*sect_size;
@@ -226,7 +227,7 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
mtdblk->cache_offset == sect_start) {
memcpy (buf, mtdblk->cache_data + offset, size);
} else {
- ret = MTD_READ (mtd, pos, size, &retlen, buf);
+ ret = mtd->read(mtd, pos, size, &retlen, buf);
if (ret)
return ret;
if (retlen != size)
@@ -288,8 +289,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
mutex_init(&mtdblk->cache_mutex);
mtdblk->cache_state = STATE_EMPTY;
- if ((mtdblk->mtd->flags & MTD_CAP_RAM) != MTD_CAP_RAM &&
- mtdblk->mtd->erasesize) {
+ if ( !(mtdblk->mtd->flags & MTD_NO_ERASE) && mtdblk->mtd->erasesize) {
mtdblk->cache_size = mtdblk->mtd->erasesize;
mtdblk->cache_data = NULL;
}
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index 0c830ba41ef..29563ed258a 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -45,9 +45,7 @@ static void mtdblock_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
dev->blksize = 512;
dev->size = mtd->size >> 9;
dev->tr = tr;
- if ((mtd->flags & (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEABLE)) !=
- (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEABLE))
- dev->readonly = 1;
+ dev->readonly = 1;
add_mtd_blktrans_dev(dev);
}
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 6f044584bdc..aa18d45b264 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -49,24 +49,18 @@ static struct mtd_notifier notifier = {
};
/*
- * We use file->private_data to store a pointer to the MTDdevice.
- * Since alighment is at least 32 bits, we have 2 bits free for OTP
- * modes as well.
+ * Data structure to hold the pointer to the mtd device as well
+ * as mode information ofr various use cases.
*/
-
-#define TO_MTD(file) (struct mtd_info *)((long)((file)->private_data) & ~3L)
-
-#define MTD_MODE_OTP_FACT 1
-#define MTD_MODE_OTP_USER 2
-#define MTD_MODE(file) ((long)((file)->private_data) & 3)
-
-#define SET_MTD_MODE(file, mode) \
- do { long __p = (long)((file)->private_data); \
- (file)->private_data = (void *)((__p & ~3L) | mode); } while (0)
+struct mtd_file_info {
+ struct mtd_info *mtd;
+ enum mtd_file_modes mode;
+};
static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
{
- struct mtd_info *mtd = TO_MTD(file);
+ struct mtd_file_info *mfi = file->private_data;
+ struct mtd_info *mtd = mfi->mtd;
switch (orig) {
case 0:
@@ -97,6 +91,7 @@ static int mtd_open(struct inode *inode, struct file *file)
int minor = iminor(inode);
int devnum = minor >> 1;
struct mtd_info *mtd;
+ struct mtd_file_info *mfi;
DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
@@ -117,14 +112,20 @@ static int mtd_open(struct inode *inode, struct file *file)
return -ENODEV;
}
- file->private_data = mtd;
-
/* You can't open it RW if it's not a writeable device */
if ((file->f_mode & 2) && !(mtd->flags & MTD_WRITEABLE)) {
put_mtd_device(mtd);
return -EACCES;
}
+ mfi = kzalloc(sizeof(*mfi), GFP_KERNEL);
+ if (!mfi) {
+ put_mtd_device(mtd);
+ return -ENOMEM;
+ }
+ mfi->mtd = mtd;
+ file->private_data = mfi;
+
return 0;
} /* mtd_open */
@@ -132,16 +133,17 @@ static int mtd_open(struct inode *inode, struct file *file)
static int mtd_close(struct inode *inode, struct file *file)
{
- struct mtd_info *mtd;
+ struct mtd_file_info *mfi = file->private_data;
+ struct mtd_info *mtd = mfi->mtd;
DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
- mtd = TO_MTD(file);
-
if (mtd->sync)
mtd->sync(mtd);
put_mtd_device(mtd);
+ file->private_data = NULL;
+ kfree(mfi);
return 0;
} /* mtd_close */
@@ -153,7 +155,8 @@ static int mtd_close(struct inode *inode, struct file *file)
static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos)
{
- struct mtd_info *mtd = TO_MTD(file);
+ struct mtd_file_info *mfi = file->private_data;
+ struct mtd_info *mtd = mfi->mtd;
size_t retlen=0;
size_t total_retlen=0;
int ret=0;
@@ -170,36 +173,58 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
/* FIXME: Use kiovec in 2.5 to lock down the user's buffers
and pass them directly to the MTD functions */
+
+ if (count > MAX_KMALLOC_SIZE)
+ kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
+ else
+ kbuf=kmalloc(count, GFP_KERNEL);
+
+ if (!kbuf)
+ return -ENOMEM;
+
while (count) {
+
if (count > MAX_KMALLOC_SIZE)
len = MAX_KMALLOC_SIZE;
else
len = count;
- kbuf=kmalloc(len,GFP_KERNEL);
- if (!kbuf)
- return -ENOMEM;
-
- switch (MTD_MODE(file)) {
- case MTD_MODE_OTP_FACT:
+ switch (mfi->mode) {
+ case MTD_MODE_OTP_FACTORY:
ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
case MTD_MODE_OTP_USER:
ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
+ case MTD_MODE_RAW:
+ {
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OOB_RAW;
+ ops.datbuf = kbuf;
+ ops.oobbuf = NULL;
+ ops.len = len;
+
+ ret = mtd->read_oob(mtd, *ppos, &ops);
+ retlen = ops.retlen;
+ break;
+ }
default:
- ret = MTD_READ(mtd, *ppos, len, &retlen, kbuf);
+ ret = mtd->read(mtd, *ppos, len, &retlen, kbuf);
}
/* Nand returns -EBADMSG on ecc errors, but it returns
* the data. For our userspace tools it is important
* to dump areas with ecc errors !
+ * For kernel internal usage it also might return -EUCLEAN
+ * to signal the caller that a bitflip has occured and has
+ * been corrected by the ECC algorithm.
* Userspace software which accesses NAND this way
* must be aware of the fact that it deals with NAND
*/
- if (!ret || (ret == -EBADMSG)) {
+ if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) {
*ppos += retlen;
if (copy_to_user(buf, kbuf, retlen)) {
- kfree(kbuf);
+ kfree(kbuf);
return -EFAULT;
}
else
@@ -215,15 +240,16 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
return ret;
}
- kfree(kbuf);
}
+ kfree(kbuf);
return total_retlen;
} /* mtd_read */
static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count,loff_t *ppos)
{
- struct mtd_info *mtd = TO_MTD(file);
+ struct mtd_file_info *mfi = file->private_data;
+ struct mtd_info *mtd = mfi->mtd;
char *kbuf;
size_t retlen;
size_t total_retlen=0;
@@ -241,25 +267,28 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
if (!count)
return 0;
+ if (count > MAX_KMALLOC_SIZE)
+ kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
+ else
+ kbuf=kmalloc(count, GFP_KERNEL);
+
+ if (!kbuf)
+ return -ENOMEM;
+
while (count) {
+
if (count > MAX_KMALLOC_SIZE)
len = MAX_KMALLOC_SIZE;
else
len = count;
- kbuf=kmalloc(len,GFP_KERNEL);
- if (!kbuf) {
- printk("kmalloc is null\n");
- return -ENOMEM;
- }
-
if (copy_from_user(kbuf, buf, len)) {
kfree(kbuf);
return -EFAULT;
}
- switch (MTD_MODE(file)) {
- case MTD_MODE_OTP_FACT:
+ switch (mfi->mode) {
+ case MTD_MODE_OTP_FACTORY:
ret = -EROFS;
break;
case MTD_MODE_OTP_USER:
@@ -269,6 +298,21 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
}
ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
+
+ case MTD_MODE_RAW:
+ {
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OOB_RAW;
+ ops.datbuf = kbuf;
+ ops.oobbuf = NULL;
+ ops.len = len;
+
+ ret = mtd->write_oob(mtd, *ppos, &ops);
+ retlen = ops.retlen;
+ break;
+ }
+
default:
ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf);
}
@@ -282,10 +326,9 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
kfree(kbuf);
return ret;
}
-
- kfree(kbuf);
}
+ kfree(kbuf);
return total_retlen;
} /* mtd_write */
@@ -299,13 +342,45 @@ static void mtdchar_erase_callback (struct erase_info *instr)
wake_up((wait_queue_head_t *)instr->priv);
}
+#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP)
+static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
+{
+ struct mtd_info *mtd = mfi->mtd;
+ int ret = 0;
+
+ switch (mode) {
+ case MTD_OTP_FACTORY:
+ if (!mtd->read_fact_prot_reg)
+ ret = -EOPNOTSUPP;
+ else
+ mfi->mode = MTD_MODE_OTP_FACTORY;
+ break;
+ case MTD_OTP_USER:
+ if (!mtd->read_fact_prot_reg)
+ ret = -EOPNOTSUPP;
+ else
+ mfi->mode = MTD_MODE_OTP_USER;
+ break;
+ default:
+ ret = -EINVAL;
+ case MTD_OTP_OFF:
+ break;
+ }
+ return ret;
+}
+#else
+# define otp_select_filemode(f,m) -EOPNOTSUPP
+#endif
+
static int mtd_ioctl(struct inode *inode, struct file *file,
u_int cmd, u_long arg)
{
- struct mtd_info *mtd = TO_MTD(file);
+ struct mtd_file_info *mfi = file->private_data;
+ struct mtd_info *mtd = mfi->mtd;
void __user *argp = (void __user *)arg;
int ret = 0;
u_long size;
+ struct mtd_info_user info;
DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
@@ -341,7 +416,15 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
}
case MEMGETINFO:
- if (copy_to_user(argp, mtd, sizeof(struct mtd_info_user)))
+ info.type = mtd->type;
+ info.flags = mtd->flags;
+ info.size = mtd->size;
+ info.erasesize = mtd->erasesize;
+ info.writesize = mtd->writesize;
+ info.oobsize = mtd->oobsize;
+ info.ecctype = mtd->ecctype;
+ info.eccsize = mtd->eccsize;
+ if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
return -EFAULT;
break;
@@ -400,8 +483,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
case MEMWRITEOOB:
{
struct mtd_oob_buf buf;
- void *databuf;
- ssize_t retlen;
+ struct mtd_oob_ops ops;
if(!(file->f_mode & 2))
return -EPERM;
@@ -409,7 +491,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
return -EFAULT;
- if (buf.length > 0x4096)
+ if (buf.length > 4096)
return -EINVAL;
if (!mtd->write_oob)
@@ -421,21 +503,32 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
if (ret)
return ret;
- databuf = kmalloc(buf.length, GFP_KERNEL);
- if (!databuf)
+ ops.len = buf.length;
+ ops.ooblen = buf.length;
+ ops.ooboffs = buf.start & (mtd->oobsize - 1);
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_PLACE;
+
+ if (ops.ooboffs && ops.len > (mtd->oobsize - ops.ooboffs))
+ return -EINVAL;
+
+ ops.oobbuf = kmalloc(buf.length, GFP_KERNEL);
+ if (!ops.oobbuf)
return -ENOMEM;
- if (copy_from_user(databuf, buf.ptr, buf.length)) {
- kfree(databuf);
+ if (copy_from_user(ops.oobbuf, buf.ptr, buf.length)) {
+ kfree(ops.oobbuf);
return -EFAULT;
}
- ret = (mtd->write_oob)(mtd, buf.start, buf.length, &retlen, databuf);
+ buf.start &= ~(mtd->oobsize - 1);
+ ret = mtd->write_oob(mtd, buf.start, &ops);
- if (copy_to_user(argp + sizeof(uint32_t), &retlen, sizeof(uint32_t)))
+ if (copy_to_user(argp + sizeof(uint32_t), &ops.retlen,
+ sizeof(uint32_t)))
ret = -EFAULT;
- kfree(databuf);
+ kfree(ops.oobbuf);
break;
}
@@ -443,13 +536,12 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
case MEMREADOOB:
{
struct mtd_oob_buf buf;
- void *databuf;
- ssize_t retlen;
+ struct mtd_oob_ops ops;
if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
return -EFAULT;
- if (buf.length > 0x4096)
+ if (buf.length > 4096)
return -EINVAL;
if (!mtd->read_oob)
@@ -457,22 +549,32 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
else
ret = access_ok(VERIFY_WRITE, buf.ptr,
buf.length) ? 0 : -EFAULT;
-
if (ret)
return ret;
- databuf = kmalloc(buf.length, GFP_KERNEL);
- if (!databuf)
+ ops.len = buf.length;
+ ops.ooblen = buf.length;
+ ops.ooboffs = buf.start & (mtd->oobsize - 1);
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_PLACE;
+
+ if (ops.ooboffs && ops.len > (mtd->oobsize - ops.ooboffs))
+ return -EINVAL;
+
+ ops.oobbuf = kmalloc(buf.length, GFP_KERNEL);
+ if (!ops.oobbuf)
return -ENOMEM;
- ret = (mtd->read_oob)(mtd, buf.start, buf.length, &retlen, databuf);
+ buf.start &= ~(mtd->oobsize - 1);
+ ret = mtd->read_oob(mtd, buf.start, &ops);
- if (put_user(retlen, (uint32_t __user *)argp))
+ if (put_user(ops.retlen, (uint32_t __user *)argp))
ret = -EFAULT;
- else if (retlen && copy_to_user(buf.ptr, databuf, retlen))
+ else if (ops.retlen && copy_to_user(buf.ptr, ops.oobbuf,
+ ops.retlen))
ret = -EFAULT;
- kfree(databuf);
+ kfree(ops.oobbuf);
break;
}
@@ -504,16 +606,22 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
break;
}
- case MEMSETOOBSEL:
- {
- if (copy_from_user(&mtd->oobinfo, argp, sizeof(struct nand_oobinfo)))
- return -EFAULT;
- break;
- }
-
+ /* Legacy interface */
case MEMGETOOBSEL:
{
- if (copy_to_user(argp, &(mtd->oobinfo), sizeof(struct nand_oobinfo)))
+ struct nand_oobinfo oi;
+
+ if (!mtd->ecclayout)
+ return -EOPNOTSUPP;
+ if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos))
+ return -EINVAL;
+
+ oi.useecc = MTD_NANDECC_AUTOPLACE;
+ memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos));
+ memcpy(&oi.oobfree, mtd->ecclayout->oobfree,
+ sizeof(oi.oobfree));
+
+ if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo)))
return -EFAULT;
break;
}
@@ -544,31 +652,17 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
break;
}
-#ifdef CONFIG_MTD_OTP
+#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP)
case OTPSELECT:
{
int mode;
if (copy_from_user(&mode, argp, sizeof(int)))
return -EFAULT;
- SET_MTD_MODE(file, 0);
- switch (mode) {
- case MTD_OTP_FACTORY:
- if (!mtd->read_fact_prot_reg)
- ret = -EOPNOTSUPP;
- else
- SET_MTD_MODE(file, MTD_MODE_OTP_FACT);
- break;
- case MTD_OTP_USER:
- if (!mtd->read_fact_prot_reg)
- ret = -EOPNOTSUPP;
- else
- SET_MTD_MODE(file, MTD_MODE_OTP_USER);
- break;
- default:
- ret = -EINVAL;
- case MTD_OTP_OFF:
- break;
- }
+
+ mfi->mode = MTD_MODE_NORMAL;
+
+ ret = otp_select_filemode(mfi, mode);
+
file->f_pos = 0;
break;
}
@@ -580,8 +674,8 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
if (!buf)
return -ENOMEM;
ret = -EOPNOTSUPP;
- switch (MTD_MODE(file)) {
- case MTD_MODE_OTP_FACT:
+ switch (mfi->mode) {
+ case MTD_MODE_OTP_FACTORY:
if (mtd->get_fact_prot_info)
ret = mtd->get_fact_prot_info(mtd, buf, 4096);
break;
@@ -589,6 +683,8 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
if (mtd->get_user_prot_info)
ret = mtd->get_user_prot_info(mtd, buf, 4096);
break;
+ default:
+ break;
}
if (ret >= 0) {
if (cmd == OTPGETREGIONCOUNT) {
@@ -607,7 +703,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
{
struct otp_info info;
- if (MTD_MODE(file) != MTD_MODE_OTP_USER)
+ if (mfi->mode != MTD_MODE_OTP_USER)
return -EINVAL;
if (copy_from_user(&info, argp, sizeof(info)))
return -EFAULT;
@@ -618,6 +714,49 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
}
#endif
+ case ECCGETLAYOUT:
+ {
+ if (!mtd->ecclayout)
+ return -EOPNOTSUPP;
+
+ if (copy_to_user(argp, &mtd->ecclayout,
+ sizeof(struct nand_ecclayout)))
+ return -EFAULT;
+ break;
+ }
+
+ case ECCGETSTATS:
+ {
+ if (copy_to_user(argp, &mtd->ecc_stats,
+ sizeof(struct mtd_ecc_stats)))
+ return -EFAULT;
+ break;
+ }
+
+ case MTDFILEMODE:
+ {
+ mfi->mode = 0;
+
+ switch(arg) {
+ case MTD_MODE_OTP_FACTORY:
+ case MTD_MODE_OTP_USER:
+ ret = otp_select_filemode(mfi, arg);
+ break;
+
+ case MTD_MODE_RAW:
+ if (!mtd->read_oob || !mtd->write_oob)
+ return -EOPNOTSUPP;
+ mfi->mode = arg;
+
+ case MTD_MODE_NORMAL:
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ file->f_pos = 0;
+ break;
+ }
+
default:
ret = -ENOTTY;
}
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 9af840364a7..1fea631b585 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -19,6 +19,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/concat.h>
+#include <asm/div64.h>
+
/*
* Our storage structure:
* Subdev points to an array of pointers to struct mtd_info objects
@@ -54,7 +56,7 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, u_char * buf)
{
struct mtd_concat *concat = CONCAT(mtd);
- int err = -EINVAL;
+ int ret = 0, err;
int i;
*retlen = 0;
@@ -78,19 +80,29 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
err = subdev->read(subdev, from, size, &retsize, buf);
- if (err)
- break;
+ /* Save information about bitflips! */
+ if (unlikely(err)) {
+ if (err == -EBADMSG) {
+ mtd->ecc_stats.failed++;
+ ret = err;
+ } else if (err == -EUCLEAN) {
+ mtd->ecc_stats.corrected++;
+ /* Do not overwrite -EBADMSG !! */
+ if (!ret)
+ ret = err;
+ } else
+ return err;
+ }
*retlen += retsize;
len -= size;
if (len == 0)
- break;
+ return ret;
- err = -EINVAL;
buf += size;
from = 0;
}
- return err;
+ return -EINVAL;
}
static int
@@ -141,211 +153,185 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len,
}
static int
-concat_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf, u_char * eccbuf,
- struct nand_oobinfo *oobsel)
+concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
+ unsigned long count, loff_t to, size_t * retlen)
{
struct mtd_concat *concat = CONCAT(mtd);
- int err = -EINVAL;
+ struct kvec *vecs_copy;
+ unsigned long entry_low, entry_high;
+ size_t total_len = 0;
int i;
+ int err = -EINVAL;
- *retlen = 0;
-
- for (i = 0; i < concat->num_subdev; i++) {
- struct mtd_info *subdev = concat->subdev[i];
- size_t size, retsize;
-
- if (from >= subdev->size) {
- /* Not destined for this subdev */
- size = 0;
- from -= subdev->size;
- continue;
- }
-
- if (from + len > subdev->size)
- /* First part goes into this subdev */
- size = subdev->size - from;
- else
- /* Entire transaction goes into this subdev */
- size = len;
+ if (!(mtd->flags & MTD_WRITEABLE))
+ return -EROFS;
- if (subdev->read_ecc)
- err = subdev->read_ecc(subdev, from, size,
- &retsize, buf, eccbuf, oobsel);
- else
- err = -EINVAL;
+ *retlen = 0;
- if (err)
- break;
+ /* Calculate total length of data */
+ for (i = 0; i < count; i++)
+ total_len += vecs[i].iov_len;
- *retlen += retsize;
- len -= size;
- if (len == 0)
- break;
+ /* Do not allow write past end of device */
+ if ((to + total_len) > mtd->size)
+ return -EINVAL;
- err = -EINVAL;
- buf += size;
- if (eccbuf) {
- eccbuf += subdev->oobsize;
- /* in nand.c at least, eccbufs are
- tagged with 2 (int)eccstatus'; we
- must account for these */
- eccbuf += 2 * (sizeof (int));
- }
- from = 0;
+ /* Check alignment */
+ if (mtd->writesize > 1) {
+ loff_t __to = to;
+ if (do_div(__to, mtd->writesize) || (total_len % mtd->writesize))
+ return -EINVAL;
}
- return err;
-}
-static int
-concat_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
- size_t * retlen, const u_char * buf, u_char * eccbuf,
- struct nand_oobinfo *oobsel)
-{
- struct mtd_concat *concat = CONCAT(mtd);
- int err = -EINVAL;
- int i;
-
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
-
- *retlen = 0;
+ /* make a copy of vecs */
+ vecs_copy = kmalloc(sizeof(struct kvec) * count, GFP_KERNEL);
+ if (!vecs_copy)
+ return -ENOMEM;
+ memcpy(vecs_copy, vecs, sizeof(struct kvec) * count);
+ entry_low = 0;
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
- size_t size, retsize;
+ size_t size, wsize, retsize, old_iov_len;
if (to >= subdev->size) {
- size = 0;
to -= subdev->size;
continue;
}
- if (to + len > subdev->size)
- size = subdev->size - to;
- else
- size = len;
+
+ size = min(total_len, (size_t)(subdev->size - to));
+ wsize = size; /* store for future use */
+
+ entry_high = entry_low;
+ while (entry_high < count) {
+ if (size <= vecs_copy[entry_high].iov_len)
+ break;
+ size -= vecs_copy[entry_high++].iov_len;
+ }
+
+ old_iov_len = vecs_copy[entry_high].iov_len;
+ vecs_copy[entry_high].iov_len = size;
if (!(subdev->flags & MTD_WRITEABLE))
err = -EROFS;
- else if (subdev->write_ecc)
- err = subdev->write_ecc(subdev, to, size,
- &retsize, buf, eccbuf, oobsel);
else
- err = -EINVAL;
+ err = subdev->writev(subdev, &vecs_copy[entry_low],
+ entry_high - entry_low + 1, to, &retsize);
+
+ vecs_copy[entry_high].iov_len = old_iov_len - size;
+ vecs_copy[entry_high].iov_base += size;
+
+ entry_low = entry_high;
if (err)
break;
*retlen += retsize;
- len -= size;
- if (len == 0)
+ total_len -= wsize;
+
+ if (total_len == 0)
break;
err = -EINVAL;
- buf += size;
- if (eccbuf)
- eccbuf += subdev->oobsize;
to = 0;
}
+
+ kfree(vecs_copy);
return err;
}
static int
-concat_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf)
+concat_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
{
struct mtd_concat *concat = CONCAT(mtd);
- int err = -EINVAL;
- int i;
+ struct mtd_oob_ops devops = *ops;
+ int i, err, ret = 0;
- *retlen = 0;
+ ops->retlen = 0;
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
- size_t size, retsize;
if (from >= subdev->size) {
- /* Not destined for this subdev */
- size = 0;
from -= subdev->size;
continue;
}
- if (from + len > subdev->size)
- /* First part goes into this subdev */
- size = subdev->size - from;
- else
- /* Entire transaction goes into this subdev */
- size = len;
- if (subdev->read_oob)
- err = subdev->read_oob(subdev, from, size,
- &retsize, buf);
- else
- err = -EINVAL;
+ /* partial read ? */
+ if (from + devops.len > subdev->size)
+ devops.len = subdev->size - from;
+
+ err = subdev->read_oob(subdev, from, &devops);
+ ops->retlen += devops.retlen;
+
+ /* Save information about bitflips! */
+ if (unlikely(err)) {
+ if (err == -EBADMSG) {
+ mtd->ecc_stats.failed++;
+ ret = err;
+ } else if (err == -EUCLEAN) {
+ mtd->ecc_stats.corrected++;
+ /* Do not overwrite -EBADMSG !! */
+ if (!ret)
+ ret = err;
+ } else
+ return err;
+ }
- if (err)
- break;
+ devops.len = ops->len - ops->retlen;
+ if (!devops.len)
+ return ret;
- *retlen += retsize;
- len -= size;
- if (len == 0)
- break;
+ if (devops.datbuf)
+ devops.datbuf += devops.retlen;
+ if (devops.oobbuf)
+ devops.oobbuf += devops.ooblen;
- err = -EINVAL;
- buf += size;
from = 0;
}
- return err;
+ return -EINVAL;
}
static int
-concat_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
- size_t * retlen, const u_char * buf)
+concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
{
struct mtd_concat *concat = CONCAT(mtd);
- int err = -EINVAL;
- int i;
+ struct mtd_oob_ops devops = *ops;
+ int i, err;
if (!(mtd->flags & MTD_WRITEABLE))
return -EROFS;
- *retlen = 0;
+ ops->retlen = 0;
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
- size_t size, retsize;
if (to >= subdev->size) {
- size = 0;
to -= subdev->size;
continue;
}
- if (to + len > subdev->size)
- size = subdev->size - to;
- else
- size = len;
- if (!(subdev->flags & MTD_WRITEABLE))
- err = -EROFS;
- else if (subdev->write_oob)
- err = subdev->write_oob(subdev, to, size, &retsize,
- buf);
- else
- err = -EINVAL;
+ /* partial write ? */
+ if (to + devops.len > subdev->size)
+ devops.len = subdev->size - to;
+ err = subdev->write_oob(subdev, to, &devops);
+ ops->retlen += devops.retlen;
if (err)
- break;
+ return err;
- *retlen += retsize;
- len -= size;
- if (len == 0)
- break;
+ devops.len = ops->len - ops->retlen;
+ if (!devops.len)
+ return 0;
- err = -EINVAL;
- buf += size;
+ if (devops.datbuf)
+ devops.datbuf += devops.retlen;
+ if (devops.oobbuf)
+ devops.oobbuf += devops.ooblen;
to = 0;
}
- return err;
+ return -EINVAL;
}
static void concat_erase_callback(struct erase_info *instr)
@@ -636,6 +622,60 @@ static void concat_resume(struct mtd_info *mtd)
}
}
+static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct mtd_concat *concat = CONCAT(mtd);
+ int i, res = 0;
+
+ if (!concat->subdev[0]->block_isbad)
+ return res;
+
+ if (ofs > mtd->size)
+ return -EINVAL;
+
+ for (i = 0; i < concat->num_subdev; i++) {
+ struct mtd_info *subdev = concat->subdev[i];
+
+ if (ofs >= subdev->size) {
+ ofs -= subdev->size;
+ continue;
+ }
+
+ res = subdev->block_isbad(subdev, ofs);
+ break;
+ }
+
+ return res;
+}
+
+static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct mtd_concat *concat = CONCAT(mtd);
+ int i, err = -EINVAL;
+
+ if (!concat->subdev[0]->block_markbad)
+ return 0;
+
+ if (ofs > mtd->size)
+ return -EINVAL;
+
+ for (i = 0; i < concat->num_subdev; i++) {
+ struct mtd_info *subdev = concat->subdev[i];
+
+ if (ofs >= subdev->size) {
+ ofs -= subdev->size;
+ continue;
+ }
+
+ err = subdev->block_markbad(subdev, ofs);
+ if (!err)
+ mtd->ecc_stats.badblocks++;
+ break;
+ }
+
+ return err;
+}
+
/*
* This function constructs a virtual MTD device by concatenating
* num_devs MTD devices. A pointer to the new device object is
@@ -677,18 +717,22 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
concat->mtd.flags = subdev[0]->flags;
concat->mtd.size = subdev[0]->size;
concat->mtd.erasesize = subdev[0]->erasesize;
- concat->mtd.oobblock = subdev[0]->oobblock;
+ concat->mtd.writesize = subdev[0]->writesize;
concat->mtd.oobsize = subdev[0]->oobsize;
concat->mtd.ecctype = subdev[0]->ecctype;
concat->mtd.eccsize = subdev[0]->eccsize;
- if (subdev[0]->read_ecc)
- concat->mtd.read_ecc = concat_read_ecc;
- if (subdev[0]->write_ecc)
- concat->mtd.write_ecc = concat_write_ecc;
+ if (subdev[0]->writev)
+ concat->mtd.writev = concat_writev;
if (subdev[0]->read_oob)
concat->mtd.read_oob = concat_read_oob;
if (subdev[0]->write_oob)
concat->mtd.write_oob = concat_write_oob;
+ if (subdev[0]->block_isbad)
+ concat->mtd.block_isbad = concat_block_isbad;
+ if (subdev[0]->block_markbad)
+ concat->mtd.block_markbad = concat_block_markbad;
+
+ concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks;
concat->subdev[0] = subdev[0];
@@ -717,12 +761,12 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
subdev[i]->flags & MTD_WRITEABLE;
}
concat->mtd.size += subdev[i]->size;
- if (concat->mtd.oobblock != subdev[i]->oobblock ||
+ concat->mtd.ecc_stats.badblocks +=
+ subdev[i]->ecc_stats.badblocks;
+ if (concat->mtd.writesize != subdev[i]->writesize ||
concat->mtd.oobsize != subdev[i]->oobsize ||
concat->mtd.ecctype != subdev[i]->ecctype ||
concat->mtd.eccsize != subdev[i]->eccsize ||
- !concat->mtd.read_ecc != !subdev[i]->read_ecc ||
- !concat->mtd.write_ecc != !subdev[i]->write_ecc ||
!concat->mtd.read_oob != !subdev[i]->read_oob ||
!concat->mtd.write_oob != !subdev[i]->write_oob) {
kfree(concat);
@@ -734,14 +778,11 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
}
+ concat->mtd.ecclayout = subdev[0]->ecclayout;
+
concat->num_subdev = num_devs;
concat->mtd.name = name;
- /*
- * NOTE: for now, we do not provide any readv()/writev() methods
- * because they are messy to implement and they are not
- * used to a great extent anyway.
- */
concat->mtd.erase = concat_erase;
concat->mtd.read = concat_read;
concat->mtd.write = concat_write;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 9905870f56e..16a952dd486 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -47,6 +47,7 @@ int add_mtd_device(struct mtd_info *mtd)
{
int i;
+ BUG_ON(mtd->writesize == 0);
mutex_lock(&mtd_table_mutex);
for (i=0; i < MAX_MTD_DEVICES; i++)
@@ -254,37 +255,6 @@ int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
return ret;
}
-
-/* default_mtd_readv - default mtd readv method for MTD devices that dont
- * implement their own
- */
-
-int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
- unsigned long count, loff_t from, size_t *retlen)
-{
- unsigned long i;
- size_t totlen = 0, thislen;
- int ret = 0;
-
- if(!mtd->read) {
- ret = -EIO;
- } else {
- for (i=0; i<count; i++) {
- if (!vecs[i].iov_len)
- continue;
- ret = mtd->read(mtd, from, vecs[i].iov_len, &thislen, vecs[i].iov_base);
- totlen += thislen;
- if (ret || thislen != vecs[i].iov_len)
- break;
- from += vecs[i].iov_len;
- }
- }
- if (retlen)
- *retlen = totlen;
- return ret;
-}
-
-
EXPORT_SYMBOL(add_mtd_device);
EXPORT_SYMBOL(del_mtd_device);
EXPORT_SYMBOL(get_mtd_device);
@@ -292,7 +262,6 @@ EXPORT_SYMBOL(put_mtd_device);
EXPORT_SYMBOL(register_mtd_user);
EXPORT_SYMBOL(unregister_mtd_user);
EXPORT_SYMBOL(default_mtd_writev);
-EXPORT_SYMBOL(default_mtd_readv);
#ifdef CONFIG_PROC_FS
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 99395911d26..77a7123a5c5 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -51,16 +51,21 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct mtd_part *part = PART(mtd);
+ int res;
+
if (from >= mtd->size)
len = 0;
else if (from + len > mtd->size)
len = mtd->size - from;
- if (part->master->read_ecc == NULL)
- return part->master->read (part->master, from + part->offset,
- len, retlen, buf);
- else
- return part->master->read_ecc (part->master, from + part->offset,
- len, retlen, buf, NULL, &mtd->oobinfo);
+ res = part->master->read (part->master, from + part->offset,
+ len, retlen, buf);
+ if (unlikely(res)) {
+ if (res == -EUCLEAN)
+ mtd->ecc_stats.corrected++;
+ if (res == -EBADMSG)
+ mtd->ecc_stats.failed++;
+ }
+ return res;
}
static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
@@ -74,6 +79,7 @@ static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
return part->master->point (part->master, from + part->offset,
len, retlen, buf);
}
+
static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
{
struct mtd_part *part = PART(mtd);
@@ -81,31 +87,25 @@ static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_
part->master->unpoint (part->master, addr, from + part->offset, len);
}
-
-static int part_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel)
+static int part_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
struct mtd_part *part = PART(mtd);
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
- if (from >= mtd->size)
- len = 0;
- else if (from + len > mtd->size)
- len = mtd->size - from;
- return part->master->read_ecc (part->master, from + part->offset,
- len, retlen, buf, eccbuf, oobsel);
-}
+ int res;
-static int part_read_oob (struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct mtd_part *part = PART(mtd);
if (from >= mtd->size)
- len = 0;
- else if (from + len > mtd->size)
- len = mtd->size - from;
- return part->master->read_oob (part->master, from + part->offset,
- len, retlen, buf);
+ return -EINVAL;
+ if (from + ops->len > mtd->size)
+ return -EINVAL;
+ res = part->master->read_oob(part->master, from + part->offset, ops);
+
+ if (unlikely(res)) {
+ if (res == -EUCLEAN)
+ mtd->ecc_stats.corrected++;
+ if (res == -EBADMSG)
+ mtd->ecc_stats.failed++;
+ }
+ return res;
}
static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
@@ -148,44 +148,23 @@ static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
len = 0;
else if (to + len > mtd->size)
len = mtd->size - to;
- if (part->master->write_ecc == NULL)
- return part->master->write (part->master, to + part->offset,
- len, retlen, buf);
- else
- return part->master->write_ecc (part->master, to + part->offset,
- len, retlen, buf, NULL, &mtd->oobinfo);
-
+ return part->master->write (part->master, to + part->offset,
+ len, retlen, buf);
}
-static int part_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
+static int part_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
struct mtd_part *part = PART(mtd);
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
- if (to >= mtd->size)
- len = 0;
- else if (to + len > mtd->size)
- len = mtd->size - to;
- return part->master->write_ecc (part->master, to + part->offset,
- len, retlen, buf, eccbuf, oobsel);
-}
-static int part_write_oob (struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct mtd_part *part = PART(mtd);
if (!(mtd->flags & MTD_WRITEABLE))
return -EROFS;
+
if (to >= mtd->size)
- len = 0;
- else if (to + len > mtd->size)
- len = mtd->size - to;
- return part->master->write_oob (part->master, to + part->offset,
- len, retlen, buf);
+ return -EINVAL;
+ if (to + ops->len > mtd->size)
+ return -EINVAL;
+ return part->master->write_oob(part->master, to + part->offset, ops);
}
static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
@@ -208,52 +187,8 @@ static int part_writev (struct mtd_info *mtd, const struct kvec *vecs,
struct mtd_part *part = PART(mtd);
if (!(mtd->flags & MTD_WRITEABLE))
return -EROFS;
- if (part->master->writev_ecc == NULL)
- return part->master->writev (part->master, vecs, count,
+ return part->master->writev (part->master, vecs, count,
to + part->offset, retlen);
- else
- return part->master->writev_ecc (part->master, vecs, count,
- to + part->offset, retlen,
- NULL, &mtd->oobinfo);
-}
-
-static int part_readv (struct mtd_info *mtd, struct kvec *vecs,
- unsigned long count, loff_t from, size_t *retlen)
-{
- struct mtd_part *part = PART(mtd);
- if (part->master->readv_ecc == NULL)
- return part->master->readv (part->master, vecs, count,
- from + part->offset, retlen);
- else
- return part->master->readv_ecc (part->master, vecs, count,
- from + part->offset, retlen,
- NULL, &mtd->oobinfo);
-}
-
-static int part_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
-{
- struct mtd_part *part = PART(mtd);
- if (!(mtd->flags & MTD_WRITEABLE))
- return -EROFS;
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
- return part->master->writev_ecc (part->master, vecs, count,
- to + part->offset, retlen,
- eccbuf, oobsel);
-}
-
-static int part_readv_ecc (struct mtd_info *mtd, struct kvec *vecs,
- unsigned long count, loff_t from, size_t *retlen,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
-{
- struct mtd_part *part = PART(mtd);
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
- return part->master->readv_ecc (part->master, vecs, count,
- from + part->offset, retlen,
- eccbuf, oobsel);
}
static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
@@ -329,12 +264,17 @@ static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = PART(mtd);
+ int res;
+
if (!(mtd->flags & MTD_WRITEABLE))
return -EROFS;
if (ofs >= mtd->size)
return -EINVAL;
ofs += part->offset;
- return part->master->block_markbad(part->master, ofs);
+ res = part->master->block_markbad(part->master, ofs);
+ if (!res)
+ mtd->ecc_stats.badblocks++;
+ return res;
}
/*
@@ -398,7 +338,7 @@ int add_mtd_partitions(struct mtd_info *master,
slave->mtd.type = master->type;
slave->mtd.flags = master->flags & ~parts[i].mask_flags;
slave->mtd.size = parts[i].size;
- slave->mtd.oobblock = master->oobblock;
+ slave->mtd.writesize = master->writesize;
slave->mtd.oobsize = master->oobsize;
slave->mtd.ecctype = master->ecctype;
slave->mtd.eccsize = master->eccsize;
@@ -415,10 +355,6 @@ int add_mtd_partitions(struct mtd_info *master,
slave->mtd.unpoint = part_unpoint;
}
- if (master->read_ecc)
- slave->mtd.read_ecc = part_read_ecc;
- if (master->write_ecc)
- slave->mtd.write_ecc = part_write_ecc;
if (master->read_oob)
slave->mtd.read_oob = part_read_oob;
if (master->write_oob)
@@ -443,12 +379,6 @@ int add_mtd_partitions(struct mtd_info *master,
}
if (master->writev)
slave->mtd.writev = part_writev;
- if (master->readv)
- slave->mtd.readv = part_readv;
- if (master->writev_ecc)
- slave->mtd.writev_ecc = part_writev_ecc;
- if (master->readv_ecc)
- slave->mtd.readv_ecc = part_readv_ecc;
if (master->lock)
slave->mtd.lock = part_lock;
if (master->unlock)
@@ -528,8 +458,17 @@ int add_mtd_partitions(struct mtd_info *master,
parts[i].name);
}
- /* copy oobinfo from master */
- memcpy(&slave->mtd.oobinfo, &master->oobinfo, sizeof(slave->mtd.oobinfo));
+ slave->mtd.ecclayout = master->ecclayout;
+ if (master->block_isbad) {
+ uint32_t offs = 0;
+
+ while(offs < slave->mtd.size) {
+ if (master->block_isbad(master,
+ offs + slave->offset))
+ slave->mtd.ecc_stats.badblocks++;
+ offs += slave->mtd.erasesize;
+ }
+ }
if(parts[i].mtdp)
{ /* store the object pointer (caller may or may not register it */
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index cfe288a6e85..3db77eec0ed 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -23,6 +23,14 @@ config MTD_NAND_VERIFY_WRITE
device thinks the write was successful, a bit could have been
flipped accidentaly due to device wear or something else.
+config MTD_NAND_ECC_SMC
+ bool "NAND ECC Smart Media byte order"
+ depends on MTD_NAND
+ default n
+ help
+ Software ECC according to the Smart Media Specification.
+ The original Linux implementation had byte 0 and 1 swapped.
+
config MTD_NAND_AUTCPU12
tristate "SmartMediaCard on autronix autcpu12 board"
depends on MTD_NAND && ARCH_AUTCPU12
@@ -49,12 +57,24 @@ config MTD_NAND_SPIA
help
If you had to ask, you don't have one. Say 'N'.
+config MTD_NAND_AMS_DELTA
+ tristate "NAND Flash device on Amstrad E3"
+ depends on MACH_AMS_DELTA && MTD_NAND
+ help
+ Support for NAND flash on Amstrad E3 (Delta).
+
config MTD_NAND_TOTO
tristate "NAND Flash device on TOTO board"
- depends on ARCH_OMAP && MTD_NAND
+ depends on ARCH_OMAP && MTD_NAND && BROKEN
help
Support for NAND flash on Texas Instruments Toto platform.
+config MTD_NAND_TS7250
+ tristate "NAND Flash device on TS-7250 board"
+ depends on MACH_TS72XX && MTD_NAND
+ help
+ Support for NAND flash on Technologic Systems TS-7250 platform.
+
config MTD_NAND_IDS
tristate
@@ -76,7 +96,7 @@ config MTD_NAND_RTC_FROM4
config MTD_NAND_PPCHAMELEONEVB
tristate "NAND Flash device on PPChameleonEVB board"
- depends on PPCHAMELEONEVB && MTD_NAND
+ depends on PPCHAMELEONEVB && MTD_NAND && BROKEN
help
This enables the NAND flash driver on the PPChameleon EVB Board.
@@ -87,7 +107,7 @@ config MTD_NAND_S3C2410
This enables the NAND flash controller on the S3C2410 and S3C2440
SoCs
- No board specfic support is done by this driver, each board
+ No board specific support is done by this driver, each board
must advertise a platform_device for the driver to attach.
config MTD_NAND_S3C2410_DEBUG
@@ -109,6 +129,22 @@ config MTD_NAND_S3C2410_HWECC
currently not be able to switch to software, as there is no
implementation for ECC method used by the S3C2410
+config MTD_NAND_NDFC
+ tristate "NDFC NanD Flash Controller"
+ depends on MTD_NAND && 44x
+ help
+ NDFC Nand Flash Controllers are integrated in EP44x SoCs
+
+config MTD_NAND_S3C2410_CLKSTOP
+ bool "S3C2410 NAND IDLE clock stop"
+ depends on MTD_NAND_S3C2410
+ default n
+ help
+ Stop the clock to the NAND controller when there is no chip
+ selected to save power. This will mean there is a small delay
+ when the is NAND chip selected or released, but will save
+ approximately 5mA of power when there is nothing happening.
+
config MTD_NAND_DISKONCHIP
tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
depends on MTD_NAND && EXPERIMENTAL
@@ -183,11 +219,24 @@ config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on MTD_NAND && ARCH_PXA
+config MTD_NAND_CS553X
+ tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+ depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH)
+ help
+ The CS553x companion chips for the AMD Geode processor
+ include NAND flash controllers with built-in hardware ECC
+ capabilities; enabling this option will allow you to use
+ these. The driver will check the MSRs to verify that the
+ controller is enabled for NAND, and currently requires that
+ the controller be in MMIO mode.
+
+ If you say "m", the module will be called "cs553x_nand.ko".
+
config MTD_NAND_NANDSIM
tristate "Support for NAND Flash Simulator"
depends on MTD_NAND && MTD_PARTITIONS
help
- The simulator may simulate verious NAND flash chips for the
+ The simulator may simulate various NAND flash chips for the
MTD nand layer.
endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 41742026a52..f74759351c9 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MTD_NAND) += nand.o nand_ecc.o
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
+obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
@@ -17,6 +18,9 @@ obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
+obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
+obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
+obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
nand-objs = nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
new file mode 100644
index 00000000000..d7897dc6b3c
--- /dev/null
+++ b/drivers/mtd/nand/ams-delta.c
@@ -0,0 +1,237 @@
+/*
+ * drivers/mtd/nand/ams-delta.c
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * Derived from drivers/mtd/toto.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash device found on the
+ * Amstrad E3 (Delta).
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/sizes.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/board-ams-delta.h>
+
+/*
+ * MTD structure for E3 (Delta)
+ */
+static struct mtd_info *ams_delta_mtd = NULL;
+
+#define NAND_MASK (AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | AMS_DELTA_LATCH2_NAND_CLE | AMS_DELTA_LATCH2_NAND_ALE | AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP)
+
+/*
+ * Define partitions for flash devices
+ */
+
+static struct mtd_partition partition_info[] = {
+ { .name = "Kernel",
+ .offset = 0,
+ .size = 3 * SZ_1M + SZ_512K },
+ { .name = "u-boot",
+ .offset = 3 * SZ_1M + SZ_512K,
+ .size = SZ_256K },
+ { .name = "u-boot params",
+ .offset = 3 * SZ_1M + SZ_512K + SZ_256K,
+ .size = SZ_256K },
+ { .name = "Amstrad LDR",
+ .offset = 4 * SZ_1M,
+ .size = SZ_256K },
+ { .name = "File system",
+ .offset = 4 * SZ_1M + 1 * SZ_256K,
+ .size = 27 * SZ_1M },
+ { .name = "PBL reserved",
+ .offset = 32 * SZ_1M - 3 * SZ_256K,
+ .size = 3 * SZ_256K },
+};
+
+static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *this = mtd->priv;
+
+ omap_writew(0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+ omap_writew(byte, this->IO_ADDR_W);
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0);
+ ndelay(40);
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE,
+ AMS_DELTA_LATCH2_NAND_NWE);
+}
+
+static u_char ams_delta_read_byte(struct mtd_info *mtd)
+{
+ u_char res;
+ struct nand_chip *this = mtd->priv;
+
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0);
+ ndelay(40);
+ omap_writew(~0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+ res = omap_readw(this->IO_ADDR_R);
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE,
+ AMS_DELTA_LATCH2_NAND_NRE);
+
+ return res;
+}
+
+static void ams_delta_write_buf(struct mtd_info *mtd, const u_char *buf,
+ int len)
+{
+ int i;
+
+ for (i=0; i<len; i++)
+ ams_delta_write_byte(mtd, buf[i]);
+}
+
+static void ams_delta_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+
+ for (i=0; i<len; i++)
+ buf[i] = ams_delta_read_byte(mtd);
+}
+
+static int ams_delta_verify_buf(struct mtd_info *mtd, const u_char *buf,
+ int len)
+{
+ int i;
+
+ for (i=0; i<len; i++)
+ if (buf[i] != ams_delta_read_byte(mtd))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * Command control function
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 7
+ * NAND_ALE: bit 2 -> bit 6
+ */
+static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned long bits;
+
+ bits = (~ctrl & NAND_NCE) << 2;
+ bits |= (ctrl & NAND_CLE) << 7;
+ bits |= (ctrl & NAND_ALE) << 6;
+
+ ams_delta_latch2_write(0xC2, bits);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ ams_delta_write_byte(mtd, cmd);
+}
+
+static int ams_delta_nand_ready(struct mtd_info *mtd)
+{
+ return omap_get_gpio_datain(AMS_DELTA_GPIO_PIN_NAND_RB);
+}
+
+/*
+ * Main initialization routine
+ */
+static int __init ams_delta_init(void)
+{
+ struct nand_chip *this;
+ int err = 0;
+
+ /* Allocate memory for MTD device structure and private data */
+ ams_delta_mtd = kmalloc(sizeof(struct mtd_info) +
+ sizeof(struct nand_chip), GFP_KERNEL);
+ if (!ams_delta_mtd) {
+ printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ ams_delta_mtd->owner = THIS_MODULE;
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *) (&ams_delta_mtd[1]);
+
+ /* Initialize structures */
+ memset(ams_delta_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
+
+ /* Link the private data with the MTD structure */
+ ams_delta_mtd->priv = this;
+
+ /* Set address of NAND IO lines */
+ this->IO_ADDR_R = (OMAP_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
+ this->IO_ADDR_W = (OMAP_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
+ this->read_byte = ams_delta_read_byte;
+ this->write_buf = ams_delta_write_buf;
+ this->read_buf = ams_delta_read_buf;
+ this->verify_buf = ams_delta_verify_buf;
+ this->cmd_ctrl = ams_delta_hwcontrol;
+ if (!omap_request_gpio(AMS_DELTA_GPIO_PIN_NAND_RB)) {
+ this->dev_ready = ams_delta_nand_ready;
+ } else {
+ this->dev_ready = NULL;
+ printk(KERN_NOTICE "Couldn't request gpio for Delta NAND ready.\n");
+ }
+ /* 25 us command delay time */
+ this->chip_delay = 30;
+ this->ecc.mode = NAND_ECC_SOFT;
+
+ /* Set chip enabled, but */
+ ams_delta_latch2_write(NAND_MASK, AMS_DELTA_LATCH2_NAND_NRE |
+ AMS_DELTA_LATCH2_NAND_NWE |
+ AMS_DELTA_LATCH2_NAND_NCE |
+ AMS_DELTA_LATCH2_NAND_NWP);
+
+ /* Scan to find existance of the device */
+ if (nand_scan(ams_delta_mtd, 1)) {
+ err = -ENXIO;
+ goto out_mtd;
+ }
+
+ /* Register the partitions */
+ add_mtd_partitions(ams_delta_mtd, partition_info,
+ ARRAY_SIZE(partition_info));
+
+ goto out;
+
+ out_mtd:
+ kfree(ams_delta_mtd);
+ out:
+ return err;
+}
+
+module_init(ams_delta_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit ams_delta_cleanup(void)
+{
+ /* Release resources, unregister device */
+ nand_release(ams_delta_mtd);
+
+ /* Free the MTD device structure */
+ kfree(ams_delta_mtd);
+}
+module_exit(ams_delta_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
+MODULE_DESCRIPTION("Glue layer for NAND flash on Amstrad E3 (Delta)");
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index bde3550910a..31228334da1 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -38,22 +39,21 @@
*/
static struct mtd_info *au1550_mtd = NULL;
static void __iomem *p_nand;
-static int nand_width = 1; /* default x8*/
+static int nand_width = 1; /* default x8 */
+static void (*au1550_write_byte)(struct mtd_info *, u_char);
/*
* Define partitions for flash device
*/
static const struct mtd_partition partition_info[] = {
{
- .name = "NAND FS 0",
- .offset = 0,
- .size = 8*1024*1024
- },
+ .name = "NAND FS 0",
+ .offset = 0,
+ .size = 8 * 1024 * 1024},
{
- .name = "NAND FS 1",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL
- }
+ .name = "NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL}
};
/**
@@ -130,21 +130,6 @@ static u16 au_read_word(struct mtd_info *mtd)
}
/**
- * au_write_word - write one word to the chip
- * @mtd: MTD device structure
- * @word: data word to write
- *
- * write function for 16bit buswith without
- * endianess conversion
- */
-static void au_write_word(struct mtd_info *mtd, u16 word)
-{
- struct nand_chip *this = mtd->priv;
- writew(word, this->IO_ADDR_W);
- au_sync();
-}
-
-/**
* au_write_buf - write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
@@ -157,7 +142,7 @@ static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
int i;
struct nand_chip *this = mtd->priv;
- for (i=0; i<len; i++) {
+ for (i = 0; i < len; i++) {
writeb(buf[i], this->IO_ADDR_W);
au_sync();
}
@@ -176,7 +161,7 @@ static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
int i;
struct nand_chip *this = mtd->priv;
- for (i=0; i<len; i++) {
+ for (i = 0; i < len; i++) {
buf[i] = readb(this->IO_ADDR_R);
au_sync();
}
@@ -195,7 +180,7 @@ static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
int i;
struct nand_chip *this = mtd->priv;
- for (i=0; i<len; i++) {
+ for (i = 0; i < len; i++) {
if (buf[i] != readb(this->IO_ADDR_R))
return -EFAULT;
au_sync();
@@ -219,7 +204,7 @@ static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++) {
+ for (i = 0; i < len; i++) {
writew(p[i], this->IO_ADDR_W);
au_sync();
}
@@ -241,7 +226,7 @@ static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++) {
+ for (i = 0; i < len; i++) {
p[i] = readw(this->IO_ADDR_R);
au_sync();
}
@@ -262,7 +247,7 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++) {
+ for (i = 0; i < len; i++) {
if (p[i] != readw(this->IO_ADDR_R))
return -EFAULT;
au_sync();
@@ -270,32 +255,52 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
return 0;
}
+/* Select the chip by setting nCE to low */
+#define NAND_CTL_SETNCE 1
+/* Deselect the chip by setting nCE to high */
+#define NAND_CTL_CLRNCE 2
+/* Select the command latch by setting CLE to high */
+#define NAND_CTL_SETCLE 3
+/* Deselect the command latch by setting CLE to low */
+#define NAND_CTL_CLRCLE 4
+/* Select the address latch by setting ALE to high */
+#define NAND_CTL_SETALE 5
+/* Deselect the address latch by setting ALE to low */
+#define NAND_CTL_CLRALE 6
static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
{
register struct nand_chip *this = mtd->priv;
- switch(cmd){
+ switch (cmd) {
- case NAND_CTL_SETCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; break;
- case NAND_CTL_CLRCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; break;
+ case NAND_CTL_SETCLE:
+ this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
+ break;
+
+ case NAND_CTL_CLRCLE:
+ this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+ break;
+
+ case NAND_CTL_SETALE:
+ this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
+ break;
- case NAND_CTL_SETALE: this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; break;
case NAND_CTL_CLRALE:
this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
- /* FIXME: Nobody knows why this is neccecary,
+ /* FIXME: Nobody knows why this is necessary,
* but it works only that way */
udelay(1);
break;
case NAND_CTL_SETNCE:
/* assert (force assert) chip enable */
- au_writel((1<<(4+NAND_CS)) , MEM_STNDCTL); break;
+ au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
break;
case NAND_CTL_CLRNCE:
- /* deassert chip enable */
- au_writel(0, MEM_STNDCTL); break;
+ /* deassert chip enable */
+ au_writel(0, MEM_STNDCTL);
break;
}
@@ -312,69 +317,200 @@ int au1550_device_ready(struct mtd_info *mtd)
return ret;
}
+/**
+ * au1550_select_chip - control -CE line
+ * Forbid driving -CE manually permitting the NAND controller to do this.
+ * Keeping -CE asserted during the whole sector reads interferes with the
+ * NOR flash and PCMCIA drivers as it causes contention on the static bus.
+ * We only have to hold -CE low for the NAND read commands since the flash
+ * chip needs it to be asserted during chip not ready time but the NAND
+ * controller keeps it released.
+ *
+ * @mtd: MTD device structure
+ * @chip: chipnumber to select, -1 for deselect
+ */
+static void au1550_select_chip(struct mtd_info *mtd, int chip)
+{
+}
+
+/**
+ * au1550_command - Send command to NAND device
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ */
+static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+ register struct nand_chip *this = mtd->priv;
+ int ce_override = 0, i;
+ ulong flags;
+
+ /* Begin command latch cycle */
+ au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
+ /*
+ * Write out the command to the device.
+ */
+ if (command == NAND_CMD_SEQIN) {
+ int readcmd;
+
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ readcmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ readcmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ readcmd = NAND_CMD_READ1;
+ }
+ au1550_write_byte(mtd, readcmd);
+ }
+ au1550_write_byte(mtd, command);
+
+ /* Set ALE and clear CLE to start address cycle */
+ au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+ if (column != -1 || page_addr != -1) {
+ au1550_hwcontrol(mtd, NAND_CTL_SETALE);
+
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (this->options & NAND_BUSWIDTH_16)
+ column >>= 1;
+ au1550_write_byte(mtd, column);
+ }
+ if (page_addr != -1) {
+ au1550_write_byte(mtd, (u8)(page_addr & 0xff));
+
+ if (command == NAND_CMD_READ0 ||
+ command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB) {
+ /*
+ * NAND controller will release -CE after
+ * the last address byte is written, so we'll
+ * have to forcibly assert it. No interrupts
+ * are allowed while we do this as we don't
+ * want the NOR flash or PCMCIA drivers to
+ * steal our precious bytes of data...
+ */
+ ce_override = 1;
+ local_irq_save(flags);
+ au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
+ }
+
+ au1550_write_byte(mtd, (u8)(page_addr >> 8));
+
+ /* One more address cycle for devices > 32MiB */
+ if (this->chipsize > (32 << 20))
+ au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f));
+ }
+ /* Latch in address */
+ au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
+ }
+
+ /*
+ * Program and erase have their own busy handlers.
+ * Status and sequential in need no delay.
+ */
+ switch (command) {
+
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ return;
+
+ case NAND_CMD_RESET:
+ break;
+
+ case NAND_CMD_READ0:
+ case NAND_CMD_READ1:
+ case NAND_CMD_READOOB:
+ /* Check if we're really driving -CE low (just in case) */
+ if (unlikely(!ce_override))
+ break;
+
+ /* Apply a short delay always to ensure that we do wait tWB. */
+ ndelay(100);
+ /* Wait for a chip to become ready... */
+ for (i = this->chip_delay; !this->dev_ready(mtd) && i > 0; --i)
+ udelay(1);
+
+ /* Release -CE and re-enable interrupts. */
+ au1550_hwcontrol(mtd, NAND_CTL_CLRNCE);
+ local_irq_restore(flags);
+ return;
+ }
+ /* Apply this short delay always to ensure that we do wait tWB. */
+ ndelay(100);
+
+ while(!this->dev_ready(mtd));
+}
+
+
/*
* Main initialization routine
*/
-int __init au1xxx_nand_init (void)
+static int __init au1xxx_nand_init(void)
{
struct nand_chip *this;
- u16 boot_swapboot = 0; /* default value */
+ u16 boot_swapboot = 0; /* default value */
int retval;
u32 mem_staddr;
u32 nand_phys;
/* Allocate memory for MTD device structure and private data */
- au1550_mtd = kmalloc (sizeof(struct mtd_info) +
- sizeof (struct nand_chip), GFP_KERNEL);
+ au1550_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!au1550_mtd) {
- printk ("Unable to allocate NAND MTD dev structure.\n");
+ printk("Unable to allocate NAND MTD dev structure.\n");
return -ENOMEM;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&au1550_mtd[1]);
+ this = (struct nand_chip *)(&au1550_mtd[1]);
/* Initialize structures */
- memset((char *) au1550_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(au1550_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
au1550_mtd->priv = this;
+ au1550_mtd->owner = THIS_MODULE;
- /* disable interrupts */
- au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
-
- /* disable NAND boot */
- au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
+ /* MEM_STNDCTL: disable ints, disable nand boot */
+ au_writel(0, MEM_STNDCTL);
#ifdef CONFIG_MIPS_PB1550
/* set gpio206 high */
- au_writel(au_readl(GPIO2_DIR) & ~(1<<6), GPIO2_DIR);
+ au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
- boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) |
- ((bcsr->status >> 6) & 0x1);
+ boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
switch (boot_swapboot) {
- case 0:
- case 2:
- case 8:
- case 0xC:
- case 0xD:
- /* x16 NAND Flash */
- nand_width = 0;
- break;
- case 1:
- case 9:
- case 3:
- case 0xE:
- case 0xF:
- /* x8 NAND Flash */
- nand_width = 1;
- break;
- default:
- printk("Pb1550 NAND: bad boot:swap\n");
- retval = -EINVAL;
- goto outmem;
+ case 0:
+ case 2:
+ case 8:
+ case 0xC:
+ case 0xD:
+ /* x16 NAND Flash */
+ nand_width = 0;
+ break;
+ case 1:
+ case 9:
+ case 3:
+ case 0xE:
+ case 0xF:
+ /* x8 NAND Flash */
+ nand_width = 1;
+ break;
+ default:
+ printk("Pb1550 NAND: bad boot:swap\n");
+ retval = -EINVAL;
+ goto outmem;
}
#endif
@@ -424,21 +560,22 @@ int __init au1xxx_nand_init (void)
/* make controller and MTD agree */
if (NAND_CS == 0)
- nand_width = au_readl(MEM_STCFG0) & (1<<22);
+ nand_width = au_readl(MEM_STCFG0) & (1 << 22);
if (NAND_CS == 1)
- nand_width = au_readl(MEM_STCFG1) & (1<<22);
+ nand_width = au_readl(MEM_STCFG1) & (1 << 22);
if (NAND_CS == 2)
- nand_width = au_readl(MEM_STCFG2) & (1<<22);
+ nand_width = au_readl(MEM_STCFG2) & (1 << 22);
if (NAND_CS == 3)
- nand_width = au_readl(MEM_STCFG3) & (1<<22);
-
+ nand_width = au_readl(MEM_STCFG3) & (1 << 22);
/* Set address of hardware control function */
- this->hwcontrol = au1550_hwcontrol;
this->dev_ready = au1550_device_ready;
+ this->select_chip = au1550_select_chip;
+ this->cmdfunc = au1550_command;
+
/* 30 us command delay time */
this->chip_delay = 30;
- this->eccmode = NAND_ECC_SOFT;
+ this->ecc.mode = NAND_ECC_SOFT;
this->options = NAND_NO_AUTOINCR;
@@ -446,15 +583,14 @@ int __init au1xxx_nand_init (void)
this->options |= NAND_BUSWIDTH_16;
this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
- this->write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
- this->write_word = au_write_word;
+ au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
this->read_word = au_read_word;
this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
/* Scan to find existence of the device */
- if (nand_scan (au1550_mtd, 1)) {
+ if (nand_scan(au1550_mtd, 1)) {
retval = -ENXIO;
goto outio;
}
@@ -465,10 +601,10 @@ int __init au1xxx_nand_init (void)
return 0;
outio:
- iounmap ((void *)p_nand);
+ iounmap((void *)p_nand);
outmem:
- kfree (au1550_mtd);
+ kfree(au1550_mtd);
return retval;
}
@@ -477,22 +613,21 @@ module_init(au1xxx_nand_init);
/*
* Clean up routine
*/
-#ifdef MODULE
-static void __exit au1550_cleanup (void)
+static void __exit au1550_cleanup(void)
{
- struct nand_chip *this = (struct nand_chip *) &au1550_mtd[1];
+ struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
/* Release resources, unregister device */
- nand_release (au1550_mtd);
+ nand_release(au1550_mtd);
/* Free the MTD device structure */
- kfree (au1550_mtd);
+ kfree(au1550_mtd);
/* Unmap */
- iounmap ((void *)p_nand);
+ iounmap((void *)p_nand);
}
+
module_exit(au1550_cleanup);
-#endif
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Embedded Edge, LLC");
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index a3c7fea404d..fe94ae9ae1f 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -4,7 +4,7 @@
* Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
*
* Derived from drivers/mtd/spia.c
- * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
*
* $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $
*
@@ -42,12 +42,7 @@
* MTD structure for AUTCPU12 board
*/
static struct mtd_info *autcpu12_mtd = NULL;
-
-static int autcpu12_io_base = CS89712_VIRT_BASE;
-static int autcpu12_fio_pbase = AUTCPU12_PHYS_SMC;
-static int autcpu12_fio_ctrl = AUTCPU12_SMC_SELECT_OFFSET;
-static int autcpu12_pedr = AUTCPU12_SMC_PORT_OFFSET;
-static void __iomem * autcpu12_fio_base;
+static void __iomem *autcpu12_fio_base;
/*
* Define partitions for flash devices
@@ -94,108 +89,131 @@ static struct mtd_partition partition_info128k[] = {
#define NUM_PARTITIONS128K 2
/*
* hardware specific access to control-lines
-*/
-static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd)
+ *
+ * ALE bit 4 autcpu12_pedr
+ * CLE bit 5 autcpu12_pedr
+ * NCE bit 0 fio_ctrl
+ *
+ */
+static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
+ struct nand_chip *chip = mtd->priv;
- switch(cmd){
-
- case NAND_CTL_SETCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |= AUTCPU12_SMC_CLE; break;
- case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_CLE; break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ void __iomem *addr
+ unsigned char bits;
- case NAND_CTL_SETALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |= AUTCPU12_SMC_ALE; break;
- case NAND_CTL_CLRALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_ALE; break;
+ addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
+ bits = (ctrl & NAND_CLE) << 4;
+ bits |= (ctrl & NAND_ALE) << 2;
+ writeb((readb(addr) & ~0x30) | bits, addr);
- case NAND_CTL_SETNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x01; break;
- case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x00; break;
+ addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET;
+ writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
/*
-* read device ready pin
-*/
+ * read device ready pin
+ */
int autcpu12_device_ready(struct mtd_info *mtd)
{
+ void __iomem *addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
- return ( (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) & AUTCPU12_SMC_RDY) ? 1 : 0;
-
+ return readb(addr) & AUTCPU12_SMC_RDY;
}
/*
* Main initialization routine
*/
-int __init autcpu12_init (void)
+static int __init autcpu12_init(void)
{
struct nand_chip *this;
int err = 0;
/* Allocate memory for MTD device structure and private data */
- autcpu12_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
- GFP_KERNEL);
+ autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
+ GFP_KERNEL);
if (!autcpu12_mtd) {
- printk ("Unable to allocate AUTCPU12 NAND MTD device structure.\n");
+ printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n");
err = -ENOMEM;
goto out;
}
/* map physical adress */
- autcpu12_fio_base = ioremap(autcpu12_fio_pbase,SZ_1K);
- if(!autcpu12_fio_base){
+ autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
+ if (!autcpu12_fio_base) {
printk("Ioremap autcpu12 SmartMedia Card failed\n");
err = -EIO;
goto out_mtd;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&autcpu12_mtd[1]);
+ this = (struct nand_chip *)(&autcpu12_mtd[1]);
/* Initialize structures */
- memset((char *) autcpu12_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(autcpu12_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
autcpu12_mtd->priv = this;
+ autcpu12_mtd->owner = THIS_MODULE;
/* Set address of NAND IO lines */
this->IO_ADDR_R = autcpu12_fio_base;
this->IO_ADDR_W = autcpu12_fio_base;
- this->hwcontrol = autcpu12_hwcontrol;
+ this->cmd_ctrl = autcpu12_hwcontrol;
this->dev_ready = autcpu12_device_ready;
/* 20 us command delay time */
this->chip_delay = 20;
- this->eccmode = NAND_ECC_SOFT;
+ this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
/*
- this->options = NAND_USE_FLASH_BBT;
- */
+ this->options = NAND_USE_FLASH_BBT;
+ */
this->options = NAND_USE_FLASH_BBT;
/* Scan to find existance of the device */
- if (nand_scan (autcpu12_mtd, 1)) {
+ if (nand_scan(autcpu12_mtd, 1)) {
err = -ENXIO;
goto out_ior;
}
/* Register the partitions */
- switch(autcpu12_mtd->size){
- case SZ_16M: add_mtd_partitions(autcpu12_mtd, partition_info16k, NUM_PARTITIONS16K); break;
- case SZ_32M: add_mtd_partitions(autcpu12_mtd, partition_info32k, NUM_PARTITIONS32K); break;
- case SZ_64M: add_mtd_partitions(autcpu12_mtd, partition_info64k, NUM_PARTITIONS64K); break;
- case SZ_128M: add_mtd_partitions(autcpu12_mtd, partition_info128k, NUM_PARTITIONS128K); break;
- default: {
- printk ("Unsupported SmartMedia device\n");
+ switch (autcpu12_mtd->size) {
+ case SZ_16M:
+ add_mtd_partitions(autcpu12_mtd, partition_info16k,
+ NUM_PARTITIONS16K);
+ break;
+ case SZ_32M:
+ add_mtd_partitions(autcpu12_mtd, partition_info32k,
+ NUM_PARTITIONS32K);
+ break;
+ case SZ_64M:
+ add_mtd_partitions(autcpu12_mtd, partition_info64k,
+ NUM_PARTITIONS64K);
+ break;
+ case SZ_128M:
+ add_mtd_partitions(autcpu12_mtd, partition_info128k,
+ NUM_PARTITIONS128K);
+ break;
+ default:
+ printk("Unsupported SmartMedia device\n");
err = -ENXIO;
goto out_ior;
- }
}
goto out;
-out_ior:
- iounmap((void *)autcpu12_fio_base);
-out_mtd:
- kfree (autcpu12_mtd);
-out:
+ out_ior:
+ iounmap(autcpu12_fio_base);
+ out_mtd:
+ kfree(autcpu12_mtd);
+ out:
return err;
}
@@ -204,20 +222,19 @@ module_init(autcpu12_init);
/*
* Clean up routine
*/
-#ifdef MODULE
-static void __exit autcpu12_cleanup (void)
+static void __exit autcpu12_cleanup(void)
{
/* Release resources, unregister device */
- nand_release (autcpu12_mtd);
+ nand_release(autcpu12_mtd);
/* unmap physical adress */
- iounmap((void *)autcpu12_fio_base);
+ iounmap(autcpu12_fio_base);
/* Free the MTD device structure */
- kfree (autcpu12_mtd);
+ kfree(autcpu12_mtd);
}
+
module_exit(autcpu12_cleanup);
-#endif
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
new file mode 100644
index 00000000000..e0a1d386e58
--- /dev/null
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -0,0 +1,353 @@
+/*
+ * drivers/mtd/nand/cs553x_nand.c
+ *
+ * (C) 2005, 2006 Red Hat Inc.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ * Tom Sylla <tom.sylla@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash controller found on
+ * the AMD CS5535/CS5536 companion chipsets for the Geode processor.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/msr.h>
+#include <asm/io.h>
+
+#define NR_CS553X_CONTROLLERS 4
+
+#define MSR_DIVIL_GLD_CAP 0x51400000 /* DIVIL capabilitiies */
+#define CAP_CS5535 0x2df000ULL
+#define CAP_CS5536 0x5df500ULL
+
+/* NAND Timing MSRs */
+#define MSR_NANDF_DATA 0x5140001b /* NAND Flash Data Timing MSR */
+#define MSR_NANDF_CTL 0x5140001c /* NAND Flash Control Timing */
+#define MSR_NANDF_RSVD 0x5140001d /* Reserved */
+
+/* NAND BAR MSRs */
+#define MSR_DIVIL_LBAR_FLSH0 0x51400010 /* Flash Chip Select 0 */
+#define MSR_DIVIL_LBAR_FLSH1 0x51400011 /* Flash Chip Select 1 */
+#define MSR_DIVIL_LBAR_FLSH2 0x51400012 /* Flash Chip Select 2 */
+#define MSR_DIVIL_LBAR_FLSH3 0x51400013 /* Flash Chip Select 3 */
+ /* Each made up of... */
+#define FLSH_LBAR_EN (1ULL<<32)
+#define FLSH_NOR_NAND (1ULL<<33) /* 1 for NAND */
+#define FLSH_MEM_IO (1ULL<<34) /* 1 for MMIO */
+ /* I/O BARs have BASE_ADDR in bits 15:4, IO_MASK in 47:36 */
+ /* MMIO BARs have BASE_ADDR in bits 31:12, MEM_MASK in 63:44 */
+
+/* Pin function selection MSR (IDE vs. flash on the IDE pins) */
+#define MSR_DIVIL_BALL_OPTS 0x51400015
+#define PIN_OPT_IDE (1<<0) /* 0 for flash, 1 for IDE */
+
+/* Registers within the NAND flash controller BAR -- memory mapped */
+#define MM_NAND_DATA 0x00 /* 0 to 0x7ff, in fact */
+#define MM_NAND_CTL 0x800 /* Any even address 0x800-0x80e */
+#define MM_NAND_IO 0x801 /* Any odd address 0x801-0x80f */
+#define MM_NAND_STS 0x810
+#define MM_NAND_ECC_LSB 0x811
+#define MM_NAND_ECC_MSB 0x812
+#define MM_NAND_ECC_COL 0x813
+#define MM_NAND_LAC 0x814
+#define MM_NAND_ECC_CTL 0x815
+
+/* Registers within the NAND flash controller BAR -- I/O mapped */
+#define IO_NAND_DATA 0x00 /* 0 to 3, in fact */
+#define IO_NAND_CTL 0x04
+#define IO_NAND_IO 0x05
+#define IO_NAND_STS 0x06
+#define IO_NAND_ECC_CTL 0x08
+#define IO_NAND_ECC_LSB 0x09
+#define IO_NAND_ECC_MSB 0x0a
+#define IO_NAND_ECC_COL 0x0b
+#define IO_NAND_LAC 0x0c
+
+#define CS_NAND_CTL_DIST_EN (1<<4) /* Enable NAND Distract interrupt */
+#define CS_NAND_CTL_RDY_INT_MASK (1<<3) /* Enable RDY/BUSY# interrupt */
+#define CS_NAND_CTL_ALE (1<<2)
+#define CS_NAND_CTL_CLE (1<<1)
+#define CS_NAND_CTL_CE (1<<0) /* Keep low; 1 to reset */
+
+#define CS_NAND_STS_FLASH_RDY (1<<3)
+#define CS_NAND_CTLR_BUSY (1<<2)
+#define CS_NAND_CMD_COMP (1<<1)
+#define CS_NAND_DIST_ST (1<<0)
+
+#define CS_NAND_ECC_PARITY (1<<2)
+#define CS_NAND_ECC_CLRECC (1<<1)
+#define CS_NAND_ECC_ENECC (1<<0)
+
+static void cs553x_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+
+ while (unlikely(len > 0x800)) {
+ memcpy_fromio(buf, this->IO_ADDR_R, 0x800);
+ buf += 0x800;
+ len -= 0x800;
+ }
+ memcpy_fromio(buf, this->IO_ADDR_R, len);
+}
+
+static void cs553x_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+
+ while (unlikely(len > 0x800)) {
+ memcpy_toio(this->IO_ADDR_R, buf, 0x800);
+ buf += 0x800;
+ len -= 0x800;
+ }
+ memcpy_toio(this->IO_ADDR_R, buf, len);
+}
+
+static unsigned char cs553x_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ return readb(this->IO_ADDR_R);
+}
+
+static void cs553x_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *this = mtd->priv;
+ int i = 100000;
+
+ while (i && readb(this->IO_ADDR_R + MM_NAND_STS) & CS_NAND_CTLR_BUSY) {
+ udelay(1);
+ i--;
+ }
+ writeb(byte, this->IO_ADDR_W + 0x801);
+}
+
+static void cs553x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char ctl = (ctrl & ~NAND_CTRL_CHANGE ) ^ 0x01;
+ writeb(ctl, mmio_base + MM_NAND_CTL);
+ }
+ if (cmd != NAND_CMD_NONE)
+ cs553x_write_byte(mtd, cmd);
+}
+
+static int cs553x_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+ unsigned char foo = readb(mmio_base + MM_NAND_STS);
+
+ return (foo & CS_NAND_STS_FLASH_RDY) && !(foo & CS_NAND_CTLR_BUSY);
+}
+
+static void cs_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+
+ writeb(0x07, mmio_base + MM_NAND_ECC_CTL);
+}
+
+static int cs_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ uint32_t ecc;
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+
+ ecc = readl(mmio_base + MM_NAND_STS);
+
+ ecc_code[1] = ecc >> 8;
+ ecc_code[0] = ecc >> 16;
+ ecc_code[2] = ecc >> 24;
+ return 0;
+}
+
+static struct mtd_info *cs553x_mtd[4];
+
+static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
+{
+ int err = 0;
+ struct nand_chip *this;
+ struct mtd_info *new_mtd;
+
+ printk(KERN_NOTICE "Probing CS553x NAND controller CS#%d at %sIO 0x%08lx\n", cs, mmio?"MM":"P", adr);
+
+ if (!mmio) {
+ printk(KERN_NOTICE "PIO mode not yet implemented for CS553X NAND controller\n");
+ return -ENXIO;
+ }
+
+ /* Allocate memory for MTD device structure and private data */
+ new_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
+ if (!new_mtd) {
+ printk(KERN_WARNING "Unable to allocate CS553X NAND MTD device structure.\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *)(&new_mtd[1]);
+
+ /* Initialize structures */
+ memset(new_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
+
+ /* Link the private data with the MTD structure */
+ new_mtd->priv = this;
+ new_mtd->owner = THIS_MODULE;
+
+ /* map physical address */
+ this->IO_ADDR_R = this->IO_ADDR_W = ioremap(adr, 4096);
+ if (!this->IO_ADDR_R) {
+ printk(KERN_WARNING "ioremap cs553x NAND @0x%08lx failed\n", adr);
+ err = -EIO;
+ goto out_mtd;
+ }
+
+ this->cmd_ctrl = cs553x_hwcontrol;
+ this->dev_ready = cs553x_device_ready;
+ this->read_byte = cs553x_read_byte;
+ this->read_buf = cs553x_read_buf;
+ this->write_buf = cs553x_write_buf;
+
+ this->chip_delay = 0;
+
+ this->ecc.mode = NAND_ECC_HW;
+ this->ecc.size = 256;
+ this->ecc.bytes = 3;
+ this->ecc.hwctl = cs_enable_hwecc;
+ this->ecc.calculate = cs_calculate_ecc;
+ this->ecc.correct = nand_correct_data;
+
+ /* Enable the following for a flash based bad block table */
+ this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+
+ /* Scan to find existance of the device */
+ if (nand_scan(new_mtd, 1)) {
+ err = -ENXIO;
+ goto out_ior;
+ }
+
+ cs553x_mtd[cs] = new_mtd;
+ goto out;
+
+out_ior:
+ iounmap((void *)this->IO_ADDR_R);
+out_mtd:
+ kfree(new_mtd);
+out:
+ return err;
+}
+
+static int is_geode(void)
+{
+ /* These are the CPUs which will have a CS553[56] companion chip */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 == 5 &&
+ boot_cpu_data.x86_model == 10)
+ return 1; /* Geode LX */
+
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC ||
+ boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX) &&
+ boot_cpu_data.x86 == 5 &&
+ boot_cpu_data.x86_model == 5)
+ return 1; /* Geode GX (née GX2) */
+
+ return 0;
+}
+
+static int __init cs553x_init(void)
+{
+ int err = -ENXIO;
+ int i;
+ uint64_t val;
+
+ /* If the CPU isn't a Geode GX or LX, abort */
+ if (!is_geode())
+ return -ENXIO;
+
+ /* If it doesn't have the CS553[56], abort */
+ rdmsrl(MSR_DIVIL_GLD_CAP, val);
+ val &= ~0xFFULL;
+ if (val != CAP_CS5535 && val != CAP_CS5536)
+ return -ENXIO;
+
+ /* If it doesn't have the NAND controller enabled, abort */
+ rdmsrl(MSR_DIVIL_BALL_OPTS, val);
+ if (val & 1) {
+ printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
+ return -ENXIO;
+ }
+
+ for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
+ rdmsrl(MSR_DIVIL_LBAR_FLSH0 + i, val);
+
+ if ((val & (FLSH_LBAR_EN|FLSH_NOR_NAND)) == (FLSH_LBAR_EN|FLSH_NOR_NAND))
+ err = cs553x_init_one(i, !!(val & FLSH_MEM_IO), val & 0xFFFFFFFF);
+ }
+
+ /* Register all devices together here. This means we can easily hack it to
+ do mtdconcat etc. if we want to. */
+ for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
+ if (cs553x_mtd[i]) {
+ add_mtd_device(cs553x_mtd[i]);
+
+ /* If any devices registered, return success. Else the last error. */
+ err = 0;
+ }
+ }
+
+ return err;
+}
+
+module_init(cs553x_init);
+
+static void __exit cs553x_cleanup(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
+ struct mtd_info *mtd = cs553x_mtd[i];
+ struct nand_chip *this;
+ void __iomem *mmio_base;
+
+ if (!mtd)
+ break;
+
+ this = cs553x_mtd[i]->priv;
+ mmio_base = this->IO_ADDR_R;
+
+ /* Release resources, unregister device */
+ nand_release(cs553x_mtd[i]);
+ cs553x_mtd[i] = NULL;
+
+ /* unmap physical adress */
+ iounmap(mmio_base);
+
+ /* Free the MTD device structure */
+ kfree(mtd);
+ }
+}
+
+module_exit(cs553x_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("NAND controller driver for AMD CS5535/CS5536 companion chip");
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index ec5e45e4e4e..6107f532855 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -58,10 +58,10 @@ static unsigned long __initdata doc_locations[] = {
0xe4000000,
#elif defined(CONFIG_MOMENCO_OCELOT)
0x2f000000,
- 0xff000000,
+ 0xff000000,
#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
- 0xff000000,
-##else
+ 0xff000000,
+#else
#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
0xffffffff };
@@ -73,7 +73,7 @@ struct doc_priv {
unsigned long physadr;
u_char ChipID;
u_char CDSNControl;
- int chips_per_floor; /* The number of chips detected on each floor */
+ int chips_per_floor; /* The number of chips detected on each floor */
int curfloor;
int curchip;
int mh0_page;
@@ -84,6 +84,7 @@ struct doc_priv {
/* This is the syndrome computed by the HW ecc generator upon reading an empty
page, one with all 0xff for data and stored ecc code. */
static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a };
+
/* This is the ecc value computed by the HW ecc generator upon writing an empty
page, one with all 0xff for data. */
static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 };
@@ -94,28 +95,29 @@ static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 };
#define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil)
#define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k)
-static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd);
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int bitmask);
static void doc200x_select_chip(struct mtd_info *mtd, int chip);
-static int debug=0;
+static int debug = 0;
module_param(debug, int, 0);
-static int try_dword=1;
+static int try_dword = 1;
module_param(try_dword, int, 0);
-static int no_ecc_failures=0;
+static int no_ecc_failures = 0;
module_param(no_ecc_failures, int, 0);
-static int no_autopart=0;
+static int no_autopart = 0;
module_param(no_autopart, int, 0);
-static int show_firmware_partition=0;
+static int show_firmware_partition = 0;
module_param(show_firmware_partition, int, 0);
#ifdef MTD_NAND_DISKONCHIP_BBTWRITE
-static int inftl_bbt_write=1;
+static int inftl_bbt_write = 1;
#else
-static int inftl_bbt_write=0;
+static int inftl_bbt_write = 0;
#endif
module_param(inftl_bbt_write, int, 0);
@@ -123,7 +125,6 @@ static unsigned long doc_config_location = CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDR
module_param(doc_config_location, ulong, 0);
MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
-
/* Sector size for HW ECC */
#define SECTOR_SIZE 512
/* The sector bytes are packed into NB_DATA 10 bit words */
@@ -147,7 +148,7 @@ static struct rs_control *rs_decoder;
* some comments, improved a minor bit and converted it to make use
* of the generic Reed-Solomon libary. tglx
*/
-static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
+static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
{
int i, j, nerr, errpos[8];
uint8_t parity;
@@ -168,18 +169,18 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
* s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0]
* where x = alpha^(FCR + i)
*/
- for(j = 1; j < NROOTS; j++) {
- if(ds[j] == 0)
+ for (j = 1; j < NROOTS; j++) {
+ if (ds[j] == 0)
continue;
tmp = rs->index_of[ds[j]];
- for(i = 0; i < NROOTS; i++)
+ for (i = 0; i < NROOTS; i++)
s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
}
/* Calc s[i] = s[i] / alpha^(v + i) */
for (i = 0; i < NROOTS; i++) {
if (syn[i])
- syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
+ syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
}
/* Call the decoder library */
nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval);
@@ -193,7 +194,7 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
* but they are given by the design of the de/encoder circuit
* in the DoC ASIC's.
*/
- for(i = 0;i < nerr; i++) {
+ for (i = 0; i < nerr; i++) {
int index, bitpos, pos = 1015 - errpos[i];
uint8_t val;
if (pos >= NB_DATA && pos < 1019)
@@ -205,8 +206,7 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
can be modified since pos is even */
index = (pos >> 3) ^ 1;
bitpos = pos & 7;
- if ((index >= 0 && index < SECTOR_SIZE) ||
- index == (SECTOR_SIZE + 1)) {
+ if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) {
val = (uint8_t) (errval[i] >> (2 + bitpos));
parity ^= val;
if (index < SECTOR_SIZE)
@@ -216,9 +216,8 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
bitpos = (bitpos + 10) & 7;
if (bitpos == 0)
bitpos = 8;
- if ((index >= 0 && index < SECTOR_SIZE) ||
- index == (SECTOR_SIZE + 1)) {
- val = (uint8_t)(errval[i] << (8 - bitpos));
+ if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) {
+ val = (uint8_t) (errval[i] << (8 - bitpos));
parity ^= val;
if (index < SECTOR_SIZE)
data[index] ^= val;
@@ -250,10 +249,11 @@ static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
static int _DoC_WaitReady(struct doc_priv *doc)
{
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
unsigned long timeo = jiffies + (HZ * 10);
- if(debug) printk("_DoC_WaitReady...\n");
+ if (debug)
+ printk("_DoC_WaitReady...\n");
/* Out-of-line routine to wait for chip response */
if (DoC_is_MillenniumPlus(doc)) {
while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
@@ -280,7 +280,7 @@ static int _DoC_WaitReady(struct doc_priv *doc)
static inline int DoC_WaitReady(struct doc_priv *doc)
{
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int ret = 0;
if (DoC_is_MillenniumPlus(doc)) {
@@ -298,7 +298,8 @@ static inline int DoC_WaitReady(struct doc_priv *doc)
DoC_Delay(doc, 2);
}
- if(debug) printk("DoC_WaitReady OK\n");
+ if (debug)
+ printk("DoC_WaitReady OK\n");
return ret;
}
@@ -306,9 +307,10 @@ static void doc2000_write_byte(struct mtd_info *mtd, u_char datum)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
- if(debug)printk("write_byte %02x\n", datum);
+ if (debug)
+ printk("write_byte %02x\n", datum);
WriteDOC(datum, docptr, CDSNSlowIO);
WriteDOC(datum, docptr, 2k_CDSN_IO);
}
@@ -317,77 +319,78 @@ static u_char doc2000_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
u_char ret;
ReadDOC(docptr, CDSNSlowIO);
DoC_Delay(doc, 2);
ret = ReadDOC(docptr, 2k_CDSN_IO);
- if (debug) printk("read_byte returns %02x\n", ret);
+ if (debug)
+ printk("read_byte returns %02x\n", ret);
return ret;
}
-static void doc2000_writebuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void doc2000_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("writebuf of %d bytes: ", len);
- for (i=0; i < len; i++) {
+ if (debug)
+ printk("writebuf of %d bytes: ", len);
+ for (i = 0; i < len; i++) {
WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i);
if (debug && i < 16)
printk("%02x ", buf[i]);
}
- if (debug) printk("\n");
+ if (debug)
+ printk("\n");
}
-static void doc2000_readbuf(struct mtd_info *mtd,
- u_char *buf, int len)
+static void doc2000_readbuf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
- int i;
+ void __iomem *docptr = doc->virtadr;
+ int i;
- if (debug)printk("readbuf of %d bytes: ", len);
+ if (debug)
+ printk("readbuf of %d bytes: ", len);
- for (i=0; i < len; i++) {
+ for (i = 0; i < len; i++) {
buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i);
}
}
-static void doc2000_readbuf_dword(struct mtd_info *mtd,
- u_char *buf, int len)
+static void doc2000_readbuf_dword(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
- int i;
+ void __iomem *docptr = doc->virtadr;
+ int i;
- if (debug) printk("readbuf_dword of %d bytes: ", len);
+ if (debug)
+ printk("readbuf_dword of %d bytes: ", len);
- if (unlikely((((unsigned long)buf)|len) & 3)) {
- for (i=0; i < len; i++) {
- *(uint8_t *)(&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i);
+ if (unlikely((((unsigned long)buf) | len) & 3)) {
+ for (i = 0; i < len; i++) {
+ *(uint8_t *) (&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i);
}
} else {
- for (i=0; i < len; i+=4) {
- *(uint32_t*)(&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i);
+ for (i = 0; i < len; i += 4) {
+ *(uint32_t *) (&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i);
}
}
}
-static int doc2000_verifybuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static int doc2000_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
- for (i=0; i < len; i++)
+ for (i = 0; i < len; i++)
if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO))
return -EFAULT;
return 0;
@@ -400,12 +403,10 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
uint16_t ret;
doc200x_select_chip(mtd, nr);
- doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_READID);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
- doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
- this->write_byte(mtd, 0);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+ doc200x_hwcontrol(mtd, NAND_CMD_READID,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/* We cant' use dev_ready here, but at least we wait for the
* command to complete
@@ -423,12 +424,11 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
} ident;
void __iomem *docptr = doc->virtadr;
- doc200x_hwcontrol(mtd, NAND_CTL_SETCLE);
- doc2000_write_byte(mtd, NAND_CMD_READID);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE);
- doc200x_hwcontrol(mtd, NAND_CTL_SETALE);
- doc2000_write_byte(mtd, 0);
- doc200x_hwcontrol(mtd, NAND_CTL_CLRALE);
+ doc200x_hwcontrol(mtd, NAND_CMD_READID,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
udelay(50);
@@ -464,7 +464,7 @@ static void __init doc2000_count_chips(struct mtd_info *mtd)
printk(KERN_DEBUG "Detected %d chips per floor.\n", i);
}
-static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this)
{
struct doc_priv *doc = this->priv;
@@ -482,7 +482,7 @@ static void doc2001_write_byte(struct mtd_info *mtd, u_char datum)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
WriteDOC(datum, docptr, CDSNSlowIO);
WriteDOC(datum, docptr, Mil_CDSN_IO);
@@ -493,7 +493,7 @@ static u_char doc2001_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
//ReadDOC(docptr, CDSNSlowIO);
/* 11.4.5 -- delay twice to allow extended length cycle */
@@ -503,50 +503,47 @@ static u_char doc2001_read_byte(struct mtd_info *mtd)
return ReadDOC(docptr, LastDataRead);
}
-static void doc2001_writebuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void doc2001_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
- for (i=0; i < len; i++)
+ for (i = 0; i < len; i++)
WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
/* Terminate write pipeline */
WriteDOC(0x00, docptr, WritePipeTerm);
}
-static void doc2001_readbuf(struct mtd_info *mtd,
- u_char *buf, int len)
+static void doc2001_readbuf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
/* Start read pipeline */
ReadDOC(docptr, ReadPipeInit);
- for (i=0; i < len-1; i++)
+ for (i = 0; i < len - 1; i++)
buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
/* Terminate read pipeline */
buf[i] = ReadDOC(docptr, LastDataRead);
}
-static int doc2001_verifybuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static int doc2001_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
/* Start read pipeline */
ReadDOC(docptr, ReadPipeInit);
- for (i=0; i < len-1; i++)
+ for (i = 0; i < len - 1; i++)
if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
ReadDOC(docptr, LastDataRead);
return i;
@@ -560,87 +557,90 @@ static u_char doc2001plus_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
u_char ret;
- ReadDOC(docptr, Mplus_ReadPipeInit);
- ReadDOC(docptr, Mplus_ReadPipeInit);
- ret = ReadDOC(docptr, Mplus_LastDataRead);
- if (debug) printk("read_byte returns %02x\n", ret);
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+ ret = ReadDOC(docptr, Mplus_LastDataRead);
+ if (debug)
+ printk("read_byte returns %02x\n", ret);
return ret;
}
-static void doc2001plus_writebuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void doc2001plus_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("writebuf of %d bytes: ", len);
- for (i=0; i < len; i++) {
+ if (debug)
+ printk("writebuf of %d bytes: ", len);
+ for (i = 0; i < len; i++) {
WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
if (debug && i < 16)
printk("%02x ", buf[i]);
}
- if (debug) printk("\n");
+ if (debug)
+ printk("\n");
}
-static void doc2001plus_readbuf(struct mtd_info *mtd,
- u_char *buf, int len)
+static void doc2001plus_readbuf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("readbuf of %d bytes: ", len);
+ if (debug)
+ printk("readbuf of %d bytes: ", len);
/* Start read pipeline */
ReadDOC(docptr, Mplus_ReadPipeInit);
ReadDOC(docptr, Mplus_ReadPipeInit);
- for (i=0; i < len-2; i++) {
+ for (i = 0; i < len - 2; i++) {
buf[i] = ReadDOC(docptr, Mil_CDSN_IO);
if (debug && i < 16)
printk("%02x ", buf[i]);
}
/* Terminate read pipeline */
- buf[len-2] = ReadDOC(docptr, Mplus_LastDataRead);
+ buf[len - 2] = ReadDOC(docptr, Mplus_LastDataRead);
if (debug && i < 16)
- printk("%02x ", buf[len-2]);
- buf[len-1] = ReadDOC(docptr, Mplus_LastDataRead);
+ printk("%02x ", buf[len - 2]);
+ buf[len - 1] = ReadDOC(docptr, Mplus_LastDataRead);
if (debug && i < 16)
- printk("%02x ", buf[len-1]);
- if (debug) printk("\n");
+ printk("%02x ", buf[len - 1]);
+ if (debug)
+ printk("\n");
}
-static int doc2001plus_verifybuf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static int doc2001plus_verifybuf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
- if (debug)printk("verifybuf of %d bytes: ", len);
+ if (debug)
+ printk("verifybuf of %d bytes: ", len);
/* Start read pipeline */
ReadDOC(docptr, Mplus_ReadPipeInit);
ReadDOC(docptr, Mplus_ReadPipeInit);
- for (i=0; i < len-2; i++)
+ for (i = 0; i < len - 2; i++)
if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) {
ReadDOC(docptr, Mplus_LastDataRead);
ReadDOC(docptr, Mplus_LastDataRead);
return i;
}
- if (buf[len-2] != ReadDOC(docptr, Mplus_LastDataRead))
- return len-2;
- if (buf[len-1] != ReadDOC(docptr, Mplus_LastDataRead))
- return len-1;
+ if (buf[len - 2] != ReadDOC(docptr, Mplus_LastDataRead))
+ return len - 2;
+ if (buf[len - 1] != ReadDOC(docptr, Mplus_LastDataRead))
+ return len - 1;
return 0;
}
@@ -648,10 +648,11 @@ static void doc2001plus_select_chip(struct mtd_info *mtd, int chip)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int floor = 0;
- if(debug)printk("select chip (%d)\n", chip);
+ if (debug)
+ printk("select chip (%d)\n", chip);
if (chip == -1) {
/* Disable flash internally */
@@ -660,7 +661,7 @@ static void doc2001plus_select_chip(struct mtd_info *mtd, int chip)
}
floor = chip / doc->chips_per_floor;
- chip -= (floor * doc->chips_per_floor);
+ chip -= (floor * doc->chips_per_floor);
/* Assert ChipEnable and deassert WriteProtect */
WriteDOC((DOC_FLASH_CE), docptr, Mplus_FlashSelect);
@@ -674,72 +675,61 @@ static void doc200x_select_chip(struct mtd_info *mtd, int chip)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int floor = 0;
- if(debug)printk("select chip (%d)\n", chip);
+ if (debug)
+ printk("select chip (%d)\n", chip);
if (chip == -1)
return;
floor = chip / doc->chips_per_floor;
- chip -= (floor * doc->chips_per_floor);
+ chip -= (floor * doc->chips_per_floor);
/* 11.4.4 -- deassert CE before changing chip */
- doc200x_hwcontrol(mtd, NAND_CTL_CLRNCE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
WriteDOC(floor, docptr, FloorSelect);
WriteDOC(chip, docptr, CDSNDeviceSelect);
- doc200x_hwcontrol(mtd, NAND_CTL_SETNCE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
doc->curchip = chip;
doc->curfloor = floor;
}
-static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd)
+#define CDSN_CTRL_MSK (CDSN_CTRL_CE | CDSN_CTRL_CLE | CDSN_CTRL_ALE)
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
- switch(cmd) {
- case NAND_CTL_SETNCE:
- doc->CDSNControl |= CDSN_CTRL_CE;
- break;
- case NAND_CTL_CLRNCE:
- doc->CDSNControl &= ~CDSN_CTRL_CE;
- break;
- case NAND_CTL_SETCLE:
- doc->CDSNControl |= CDSN_CTRL_CLE;
- break;
- case NAND_CTL_CLRCLE:
- doc->CDSNControl &= ~CDSN_CTRL_CLE;
- break;
- case NAND_CTL_SETALE:
- doc->CDSNControl |= CDSN_CTRL_ALE;
- break;
- case NAND_CTL_CLRALE:
- doc->CDSNControl &= ~CDSN_CTRL_ALE;
- break;
- case NAND_CTL_SETWP:
- doc->CDSNControl |= CDSN_CTRL_WP;
- break;
- case NAND_CTL_CLRWP:
- doc->CDSNControl &= ~CDSN_CTRL_WP;
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ doc->CDSNControl &= ~CDSN_CTRL_MSK;
+ doc->CDSNControl |= ctrl & CDSN_CTRL_MSK;
+ if (debug)
+ printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl);
+ WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+ /* 11.4.3 -- 4 NOPs after CSDNControl write */
+ DoC_Delay(doc, 4);
+ }
+ if (cmd != NAND_CMD_NONE) {
+ if (DoC_is_2000(doc))
+ doc2000_write_byte(mtd, cmd);
+ else
+ doc2001_write_byte(mtd, cmd);
}
- if (debug)printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl);
- WriteDOC(doc->CDSNControl, docptr, CDSNControl);
- /* 11.4.3 -- 4 NOPs after CSDNControl write */
- DoC_Delay(doc, 4);
}
-static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
/*
* Must terminate write pipeline before sending any commands
@@ -756,9 +746,9 @@ static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int col
if (command == NAND_CMD_SEQIN) {
int readcmd;
- if (column >= mtd->oobblock) {
+ if (column >= mtd->writesize) {
/* OOB area */
- column -= mtd->oobblock;
+ column -= mtd->writesize;
readcmd = NAND_CMD_READOOB;
} else if (column < 256) {
/* First 256 bytes --> READ0 */
@@ -782,25 +772,26 @@ static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int col
WriteDOC(column, docptr, Mplus_FlashAddress);
}
if (page_addr != -1) {
- WriteDOC((unsigned char) (page_addr & 0xff), docptr, Mplus_FlashAddress);
- WriteDOC((unsigned char) ((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
+ WriteDOC((unsigned char)(page_addr & 0xff), docptr, Mplus_FlashAddress);
+ WriteDOC((unsigned char)((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
/* One more address cycle for higher density devices */
if (this->chipsize & 0x0c000000) {
- WriteDOC((unsigned char) ((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
+ WriteDOC((unsigned char)((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
printk("high density\n");
}
}
WriteDOC(0, docptr, Mplus_WritePipeTerm);
WriteDOC(0, docptr, Mplus_WritePipeTerm);
/* deassert ALE */
- if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || command == NAND_CMD_READOOB || command == NAND_CMD_READID)
+ if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB || command == NAND_CMD_READID)
WriteDOC(0, docptr, Mplus_FlashControl);
}
/*
* program and erase have their own busy handlers
* status and sequential in needs no delay
- */
+ */
switch (command) {
case NAND_CMD_PAGEPROG:
@@ -817,55 +808,57 @@ static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int col
WriteDOC(NAND_CMD_STATUS, docptr, Mplus_FlashCmd);
WriteDOC(0, docptr, Mplus_WritePipeTerm);
WriteDOC(0, docptr, Mplus_WritePipeTerm);
- while ( !(this->read_byte(mtd) & 0x40));
+ while (!(this->read_byte(mtd) & 0x40)) ;
return;
- /* This applies to read commands */
+ /* This applies to read commands */
default:
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
+ */
if (!this->dev_ready) {
- udelay (this->chip_delay);
+ udelay(this->chip_delay);
return;
}
}
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
+ ndelay(100);
/* wait until command is processed */
- while (!this->dev_ready(mtd));
+ while (!this->dev_ready(mtd)) ;
}
static int doc200x_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
if (DoC_is_MillenniumPlus(doc)) {
/* 11.4.2 -- must NOP four times before checking FR/B# */
DoC_Delay(doc, 4);
if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
- if(debug)
+ if (debug)
printk("not ready\n");
return 0;
}
- if (debug)printk("was ready\n");
+ if (debug)
+ printk("was ready\n");
return 1;
} else {
/* 11.4.2 -- must NOP four times before checking FR/B# */
DoC_Delay(doc, 4);
if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
- if(debug)
+ if (debug)
printk("not ready\n");
return 0;
}
/* 11.4.2 -- Must NOP twice if it's ready */
DoC_Delay(doc, 2);
- if (debug)printk("was ready\n");
+ if (debug)
+ printk("was ready\n");
return 1;
}
}
@@ -881,10 +874,10 @@ static void doc200x_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
/* Prime the ECC engine */
- switch(mode) {
+ switch (mode) {
case NAND_ECC_READ:
WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
WriteDOC(DOC_ECC_EN, docptr, ECCConf);
@@ -900,10 +893,10 @@ static void doc2001plus_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
/* Prime the ECC engine */
- switch(mode) {
+ switch (mode) {
case NAND_ECC_READ:
WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf);
@@ -916,12 +909,11 @@ static void doc2001plus_enable_hwecc(struct mtd_info *mtd, int mode)
}
/* This code is only called on write */
-static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
- unsigned char *ecc_code)
+static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat, unsigned char *ecc_code)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
int i;
int emptymatch = 1;
@@ -961,7 +953,8 @@ static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
often. It could be optimized away by examining the data in
the writebuf routine, and remembering the result. */
for (i = 0; i < 512; i++) {
- if (dat[i] == 0xff) continue;
+ if (dat[i] == 0xff)
+ continue;
emptymatch = 0;
break;
}
@@ -969,17 +962,20 @@ static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
/* If emptymatch still =1, we do have an all-0xff data buffer.
Return all-0xff ecc value instead of the computed one, so
it'll look just like a freshly-erased page. */
- if (emptymatch) memset(ecc_code, 0xff, 6);
+ if (emptymatch)
+ memset(ecc_code, 0xff, 6);
#endif
return 0;
}
-static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *isnull)
{
int i, ret = 0;
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- void __iomem *docptr = doc->virtadr;
+ void __iomem *docptr = doc->virtadr;
+ uint8_t calc_ecc[6];
volatile u_char dummy;
int emptymatch = 1;
@@ -1012,18 +1008,20 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
all-0xff data and stored ecc block. Check the stored ecc. */
if (emptymatch) {
for (i = 0; i < 6; i++) {
- if (read_ecc[i] == 0xff) continue;
+ if (read_ecc[i] == 0xff)
+ continue;
emptymatch = 0;
break;
}
}
/* If emptymatch still =1, check the data block. */
if (emptymatch) {
- /* Note: this somewhat expensive test should not be triggered
- often. It could be optimized away by examining the data in
- the readbuf routine, and remembering the result. */
+ /* Note: this somewhat expensive test should not be triggered
+ often. It could be optimized away by examining the data in
+ the readbuf routine, and remembering the result. */
for (i = 0; i < 512; i++) {
- if (dat[i] == 0xff) continue;
+ if (dat[i] == 0xff)
+ continue;
emptymatch = 0;
break;
}
@@ -1032,7 +1030,8 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
erased block, in which case the ECC will not come out right.
We'll suppress the error and tell the caller everything's
OK. Because it is. */
- if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc);
+ if (!emptymatch)
+ ret = doc_ecc_decode(rs_decoder, dat, calc_ecc);
if (ret > 0)
printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret);
}
@@ -1059,11 +1058,10 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
* safer. The only problem with it is that any code that parses oobfree must
* be able to handle out-of-order segments.
*/
-static struct nand_oobinfo doc200x_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
- .eccbytes = 6,
- .eccpos = {0, 1, 2, 3, 4, 5},
- .oobfree = { {8, 8}, {6, 2} }
+static struct nand_ecclayout doc200x_oobinfo = {
+ .eccbytes = 6,
+ .eccpos = {0, 1, 2, 3, 4, 5},
+ .oobfree = {{8, 8}, {6, 2}}
};
/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
@@ -1072,8 +1070,7 @@ static struct nand_oobinfo doc200x_oobinfo = {
either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media
header. The page #s of the found media headers are placed in mh0_page and
mh1_page in the DOC private structure. */
-static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
- const char *id, int findmirror)
+static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, const char *id, int findmirror)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -1082,17 +1079,19 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
size_t retlen;
for (offs = 0; offs < mtd->size; offs += mtd->erasesize) {
- ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
- if (retlen != mtd->oobblock) continue;
+ ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+ if (retlen != mtd->writesize)
+ continue;
if (ret) {
- printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n",
- offs);
+ printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n", offs);
}
- if (memcmp(buf, id, 6)) continue;
+ if (memcmp(buf, id, 6))
+ continue;
printk(KERN_INFO "Found DiskOnChip %s Media Header at 0x%x\n", id, offs);
if (doc->mh0_page == -1) {
doc->mh0_page = offs >> this->page_shift;
- if (!findmirror) return 1;
+ if (!findmirror)
+ return 1;
continue;
}
doc->mh1_page = offs >> this->page_shift;
@@ -1105,8 +1104,8 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
/* Only one mediaheader was found. We want buf to contain a
mediaheader on return, so we'll have to re-read the one we found. */
offs = doc->mh0_page << this->page_shift;
- ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
- if (retlen != mtd->oobblock) {
+ ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf);
+ if (retlen != mtd->writesize) {
/* Insanity. Give up. */
printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n");
return 0;
@@ -1114,8 +1113,7 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
return 1;
}
-static inline int __init nftl_partscan(struct mtd_info *mtd,
- struct mtd_partition *parts)
+static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -1127,13 +1125,14 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
unsigned blocks, maxblocks;
int offs, numheaders;
- buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+ buf = kmalloc(mtd->writesize, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
return 0;
}
- if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out;
- mh = (struct NFTLMediaHeader *) buf;
+ if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1)))
+ goto out;
+ mh = (struct NFTLMediaHeader *)buf;
mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
@@ -1155,8 +1154,8 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
/* Auto-determine UnitSizeFactor. The constraints are:
- There can be at most 32768 virtual blocks.
- There can be at most (virtual block size - page size)
- virtual blocks (because MediaHeader+BBT must fit in 1).
- */
+ virtual blocks (because MediaHeader+BBT must fit in 1).
+ */
mh->UnitSizeFactor = 0xff;
while (blocks > maxblocks) {
blocks >>= 1;
@@ -1211,14 +1210,13 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
}
ret = numparts;
-out:
+ out:
kfree(buf);
return ret;
}
/* This is a stripped-down copy of the code in inftlmount.c */
-static inline int __init inftl_partscan(struct mtd_info *mtd,
- struct mtd_partition *parts)
+static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts)
{
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
@@ -1235,15 +1233,16 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
if (inftl_bbt_write)
end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift);
- buf = kmalloc(mtd->oobblock, GFP_KERNEL);
+ buf = kmalloc(mtd->writesize, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n");
return 0;
}
- if (!find_media_headers(mtd, buf, "BNAND", 0)) goto out;
+ if (!find_media_headers(mtd, buf, "BNAND", 0))
+ goto out;
doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
- mh = (struct INFTLMediaHeader *) buf;
+ mh = (struct INFTLMediaHeader *)buf;
mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
@@ -1319,8 +1318,10 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
parts[numparts].offset = ip->firstUnit << vshift;
parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift;
numparts++;
- if (ip->lastUnit > lastvunit) lastvunit = ip->lastUnit;
- if (ip->flags & INFTL_LAST) break;
+ if (ip->lastUnit > lastvunit)
+ lastvunit = ip->lastUnit;
+ if (ip->flags & INFTL_LAST)
+ break;
}
lastvunit++;
if ((lastvunit << vshift) < end) {
@@ -1330,7 +1331,7 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
numparts++;
}
ret = numparts;
-out:
+ out:
kfree(buf);
return ret;
}
@@ -1342,11 +1343,12 @@ static int __init nftl_scan_bbt(struct mtd_info *mtd)
struct doc_priv *doc = this->priv;
struct mtd_partition parts[2];
- memset((char *) parts, 0, sizeof(parts));
+ memset((char *)parts, 0, sizeof(parts));
/* On NFTL, we have to find the media headers before we can read the
BBTs, since they're stored in the media header eraseblocks. */
numparts = nftl_partscan(mtd, parts);
- if (!numparts) return -EIO;
+ if (!numparts)
+ return -EIO;
this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
NAND_BBT_VERSION;
@@ -1393,8 +1395,7 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd)
this->bbt_td->pages[0] = 2;
this->bbt_md = NULL;
} else {
- this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
- NAND_BBT_VERSION;
+ this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION;
if (inftl_bbt_write)
this->bbt_td->options |= NAND_BBT_WRITE;
this->bbt_td->offs = 8;
@@ -1404,8 +1405,7 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd)
this->bbt_td->reserved_block_code = 0x01;
this->bbt_td->pattern = "MSYS_BBT";
- this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT |
- NAND_BBT_VERSION;
+ this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION;
if (inftl_bbt_write)
this->bbt_md->options |= NAND_BBT_WRITE;
this->bbt_md->offs = 8;
@@ -1420,12 +1420,13 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd)
At least as nand_bbt.c is currently written. */
if ((ret = nand_scan_bbt(mtd, NULL)))
return ret;
- memset((char *) parts, 0, sizeof(parts));
+ memset((char *)parts, 0, sizeof(parts));
numparts = inftl_partscan(mtd, parts);
/* At least for now, require the INFTL Media Header. We could probably
do without it for non-INFTL use, since all it gives us is
autopartitioning, but I want to give it more thought. */
- if (!numparts) return -EIO;
+ if (!numparts)
+ return -EIO;
add_mtd_device(mtd);
#ifdef CONFIG_MTD_PARTITIONS
if (!no_autopart)
@@ -1439,7 +1440,6 @@ static inline int __init doc2000_init(struct mtd_info *mtd)
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- this->write_byte = doc2000_write_byte;
this->read_byte = doc2000_read_byte;
this->write_buf = doc2000_writebuf;
this->read_buf = doc2000_readbuf;
@@ -1457,7 +1457,6 @@ static inline int __init doc2001_init(struct mtd_info *mtd)
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- this->write_byte = doc2001_write_byte;
this->read_byte = doc2001_read_byte;
this->write_buf = doc2001_writebuf;
this->read_buf = doc2001_readbuf;
@@ -1489,16 +1488,15 @@ static inline int __init doc2001plus_init(struct mtd_info *mtd)
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
- this->write_byte = NULL;
this->read_byte = doc2001plus_read_byte;
this->write_buf = doc2001plus_writebuf;
this->read_buf = doc2001plus_readbuf;
this->verify_buf = doc2001plus_verifybuf;
this->scan_bbt = inftl_scan_bbt;
- this->hwcontrol = NULL;
+ this->cmd_ctrl = NULL;
this->select_chip = doc2001plus_select_chip;
this->cmdfunc = doc2001plus_command;
- this->enable_hwecc = doc2001plus_enable_hwecc;
+ this->ecc.hwctl = doc2001plus_enable_hwecc;
doc->chips_per_floor = 1;
mtd->name = "DiskOnChip Millennium Plus";
@@ -1535,20 +1533,16 @@ static int __init doc_probe(unsigned long physadr)
save_control = ReadDOC(virtadr, DOCControl);
/* Reset the DiskOnChip ASIC */
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
- virtadr, DOCControl);
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
- virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl);
/* Enable the DiskOnChip ASIC */
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
- virtadr, DOCControl);
- WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
- virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl);
ChipID = ReadDOC(virtadr, ChipID);
- switch(ChipID) {
+ switch (ChipID) {
case DOC_ChipID_Doc2k:
reg = DoC_2k_ECCStatus;
break;
@@ -1564,15 +1558,13 @@ static int __init doc_probe(unsigned long physadr)
ReadDOC(virtadr, Mplus_Power);
/* Reset the Millennium Plus ASIC */
- tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
- DOC_MODE_BDECT;
+ tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT;
WriteDOC(tmp, virtadr, Mplus_DOCControl);
WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
mdelay(1);
/* Enable the Millennium Plus ASIC */
- tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT |
- DOC_MODE_BDECT;
+ tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT;
WriteDOC(tmp, virtadr, Mplus_DOCControl);
WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
mdelay(1);
@@ -1596,7 +1588,7 @@ static int __init doc_probe(unsigned long physadr)
goto notfound;
}
/* Check the TOGGLE bit in the ECC register */
- tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+ tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
if ((tmp == tmpb) || (tmp != tmpc)) {
@@ -1626,11 +1618,11 @@ static int __init doc_probe(unsigned long physadr)
if (ChipID == DOC_ChipID_DocMilPlus16) {
WriteDOC(~newval, virtadr, Mplus_AliasResolution);
oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
- WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it
+ WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it
} else {
WriteDOC(~newval, virtadr, AliasResolution);
oldval = ReadDOC(doc->virtadr, AliasResolution);
- WriteDOC(newval, virtadr, AliasResolution); // restore it
+ WriteDOC(newval, virtadr, AliasResolution); // restore it
}
newval = ~newval;
if (oldval == newval) {
@@ -1642,10 +1634,8 @@ static int __init doc_probe(unsigned long physadr)
printk(KERN_NOTICE "DiskOnChip found at 0x%lx\n", physadr);
len = sizeof(struct mtd_info) +
- sizeof(struct nand_chip) +
- sizeof(struct doc_priv) +
- (2 * sizeof(struct nand_bbt_descr));
- mtd = kmalloc(len, GFP_KERNEL);
+ sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr));
+ mtd = kmalloc(len, GFP_KERNEL);
if (!mtd) {
printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len);
ret = -ENOMEM;
@@ -1663,17 +1653,19 @@ static int __init doc_probe(unsigned long physadr)
nand->priv = doc;
nand->select_chip = doc200x_select_chip;
- nand->hwcontrol = doc200x_hwcontrol;
+ nand->cmd_ctrl = doc200x_hwcontrol;
nand->dev_ready = doc200x_dev_ready;
nand->waitfunc = doc200x_wait;
nand->block_bad = doc200x_block_bad;
- nand->enable_hwecc = doc200x_enable_hwecc;
- nand->calculate_ecc = doc200x_calculate_ecc;
- nand->correct_data = doc200x_correct_data;
+ nand->ecc.hwctl = doc200x_enable_hwecc;
+ nand->ecc.calculate = doc200x_calculate_ecc;
+ nand->ecc.correct = doc200x_correct_data;
- nand->autooob = &doc200x_oobinfo;
- nand->eccmode = NAND_ECC_HW6_512;
- nand->options = NAND_USE_FLASH_BBT | NAND_HWECC_SYNDROME;
+ nand->ecc.layout = &doc200x_oobinfo;
+ nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 6;
+ nand->options = NAND_USE_FLASH_BBT;
doc->physadr = physadr;
doc->virtadr = virtadr;
@@ -1707,18 +1699,18 @@ static int __init doc_probe(unsigned long physadr)
doclist = mtd;
return 0;
-notfound:
+ notfound:
/* Put back the contents of the DOCControl register, in case it's not
actually a DiskOnChip. */
WriteDOC(save_control, virtadr, DOCControl);
-fail:
+ fail:
iounmap(virtadr);
return ret;
}
static void release_nanddoc(void)
{
- struct mtd_info *mtd, *nextmtd;
+ struct mtd_info *mtd, *nextmtd;
struct nand_chip *nand;
struct doc_priv *doc;
@@ -1747,8 +1739,8 @@ static int __init init_nanddoc(void)
* generator polinomial degree = 4
*/
rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS);
- if (!rs_decoder) {
- printk (KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
+ if (!rs_decoder) {
+ printk(KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
return -ENOMEM;
}
@@ -1758,7 +1750,7 @@ static int __init init_nanddoc(void)
if (ret < 0)
goto outerr;
} else {
- for (i=0; (doc_locations[i] != 0xffffffff); i++) {
+ for (i = 0; (doc_locations[i] != 0xffffffff); i++) {
doc_probe(doc_locations[i]);
}
}
@@ -1770,7 +1762,7 @@ static int __init init_nanddoc(void)
goto outerr;
}
return 0;
-outerr:
+ outerr:
free_rs(rs_decoder);
return ret;
}
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 9b1fd2f387f..516c0e5e564 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -1,7 +1,7 @@
/*
* drivers/mtd/nand/edb7312.c
*
- * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
+ * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
*
* Derived from drivers/mtd/nand/autcpu12.c
* Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
@@ -25,7 +25,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
#include <asm/sizes.h>
#include <asm/hardware/clps7111.h>
@@ -54,51 +54,45 @@ static struct mtd_info *ep7312_mtd = NULL;
*/
static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
-static void __iomem * ep7312_pxdr = (void __iomem *) EP7312_PXDR;
-static void __iomem * ep7312_pxddr = (void __iomem *) EP7312_PXDDR;
+static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR;
+static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR;
#ifdef CONFIG_MTD_PARTITIONS
/*
* Define static partitions for flash device
*/
static struct mtd_partition partition_info[] = {
- { .name = "EP7312 Nand Flash",
- .offset = 0,
- .size = 8*1024*1024 }
+ {.name = "EP7312 Nand Flash",
+ .offset = 0,
+ .size = 8 * 1024 * 1024}
};
+
#define NUM_PARTITIONS 1
#endif
-
/*
* hardware specific access to control-lines
+ *
+ * NAND_NCE: bit 0 -> bit 7
+ * NAND_CLE: bit 1 -> bit 4
+ * NAND_ALE: bit 2 -> bit 5
*/
-static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd)
+static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
- switch(cmd) {
-
- case NAND_CTL_SETCLE:
- clps_writeb(clps_readb(ep7312_pxdr) | 0x10, ep7312_pxdr);
- break;
- case NAND_CTL_CLRCLE:
- clps_writeb(clps_readb(ep7312_pxdr) & ~0x10, ep7312_pxdr);
- break;
-
- case NAND_CTL_SETALE:
- clps_writeb(clps_readb(ep7312_pxdr) | 0x20, ep7312_pxdr);
- break;
- case NAND_CTL_CLRALE:
- clps_writeb(clps_readb(ep7312_pxdr) & ~0x20, ep7312_pxdr);
- break;
-
- case NAND_CTL_SETNCE:
- clps_writeb((clps_readb(ep7312_pxdr) | 0x80) & ~0x40, ep7312_pxdr);
- break;
- case NAND_CTL_CLRNCE:
- clps_writeb((clps_readb(ep7312_pxdr) | 0x80) | 0x40, ep7312_pxdr);
- break;
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits;
+
+ bits = (ctrl & (NAND_CLE | NAND_ALE)) << 3;
+ bits = (ctrl & NAND_NCE) << 7;
+
+ clps_writeb((clps_readb(ep7312_pxdr) & 0xB0) | 0x10,
+ ep7312_pxdr);
}
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
/*
@@ -108,6 +102,7 @@ static int ep7312_device_ready(struct mtd_info *mtd)
{
return 1;
}
+
#ifdef CONFIG_MTD_PARTITIONS
const char *part_probes[] = { "cmdlinepart", NULL };
#endif
@@ -115,18 +110,16 @@ const char *part_probes[] = { "cmdlinepart", NULL };
/*
* Main initialization routine
*/
-static int __init ep7312_init (void)
+static int __init ep7312_init(void)
{
struct nand_chip *this;
const char *part_type = 0;
int mtd_parts_nb = 0;
struct mtd_partition *mtd_parts = 0;
- void __iomem * ep7312_fio_base;
+ void __iomem *ep7312_fio_base;
/* Allocate memory for MTD device structure and private data */
- ep7312_mtd = kmalloc(sizeof(struct mtd_info) +
- sizeof(struct nand_chip),
- GFP_KERNEL);
+ ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!ep7312_mtd) {
printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
return -ENOMEM;
@@ -134,21 +127,22 @@ static int __init ep7312_init (void)
/* map physical adress */
ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
- if(!ep7312_fio_base) {
+ if (!ep7312_fio_base) {
printk("ioremap EDB7312 NAND flash failed\n");
kfree(ep7312_mtd);
return -EIO;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&ep7312_mtd[1]);
+ this = (struct nand_chip *)(&ep7312_mtd[1]);
/* Initialize structures */
- memset((char *) ep7312_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(ep7312_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
ep7312_mtd->priv = this;
+ ep7312_mtd->owner = THIS_MODULE;
/*
* Set GPIO Port B control register so that the pins are configured
@@ -159,22 +153,20 @@ static int __init ep7312_init (void)
/* insert callbacks */
this->IO_ADDR_R = ep7312_fio_base;
this->IO_ADDR_W = ep7312_fio_base;
- this->hwcontrol = ep7312_hwcontrol;
+ this->cmd_ctrl = ep7312_hwcontrol;
this->dev_ready = ep7312_device_ready;
/* 15 us command delay time */
this->chip_delay = 15;
/* Scan to find existence of the device */
- if (nand_scan (ep7312_mtd, 1)) {
+ if (nand_scan(ep7312_mtd, 1)) {
iounmap((void *)ep7312_fio_base);
- kfree (ep7312_mtd);
+ kfree(ep7312_mtd);
return -ENXIO;
}
-
#ifdef CONFIG_MTD_PARTITIONS
ep7312_mtd->name = "edb7312-nand";
- mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes,
- &mtd_parts, 0);
+ mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0);
if (mtd_parts_nb > 0)
part_type = "command line";
else
@@ -193,24 +185,23 @@ static int __init ep7312_init (void)
/* Return happy */
return 0;
}
+
module_init(ep7312_init);
/*
* Clean up routine
*/
-static void __exit ep7312_cleanup (void)
+static void __exit ep7312_cleanup(void)
{
- struct nand_chip *this = (struct nand_chip *) &ep7312_mtd[1];
+ struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1];
/* Release resources, unregister device */
- nand_release (ap7312_mtd);
-
- /* Free internal data buffer */
- kfree (this->data_buf);
+ nand_release(ap7312_mtd);
/* Free the MTD device structure */
- kfree (ep7312_mtd);
+ kfree(ep7312_mtd);
}
+
module_exit(ep7312_cleanup);
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index f68f7a99a63..2d585d2d090 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -4,7 +4,7 @@
* Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com)
*
* Derived from drivers/mtd/nand/edb7312.c
- * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
+ * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
* Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
*
* $Id: h1910.c,v 1.6 2005/11/07 11:14:30 gleixner Exp $
@@ -26,7 +26,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
#include <asm/sizes.h>
#include <asm/arch/h1900-gpio.h>
#include <asm/arch/ipaq.h>
@@ -45,47 +45,29 @@ static struct mtd_info *h1910_nand_mtd = NULL;
* Define static partitions for flash device
*/
static struct mtd_partition partition_info[] = {
- { name: "h1910 NAND Flash",
- offset: 0,
- size: 16*1024*1024 }
+ {name:"h1910 NAND Flash",
+ offset:0,
+ size:16 * 1024 * 1024}
};
+
#define NUM_PARTITIONS 1
#endif
-
/*
* hardware specific access to control-lines
+ *
+ * NAND_NCE: bit 0 - don't care
+ * NAND_CLE: bit 1 - address bit 2
+ * NAND_ALE: bit 2 - address bit 3
*/
-static void h1910_hwcontrol(struct mtd_info *mtd, int cmd)
+static void h1910_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
- struct nand_chip* this = (struct nand_chip *) (mtd->priv);
-
- switch(cmd) {
-
- case NAND_CTL_SETCLE:
- this->IO_ADDR_R |= (1 << 2);
- this->IO_ADDR_W |= (1 << 2);
- break;
- case NAND_CTL_CLRCLE:
- this->IO_ADDR_R &= ~(1 << 2);
- this->IO_ADDR_W &= ~(1 << 2);
- break;
-
- case NAND_CTL_SETALE:
- this->IO_ADDR_R |= (1 << 3);
- this->IO_ADDR_W |= (1 << 3);
- break;
- case NAND_CTL_CLRALE:
- this->IO_ADDR_R &= ~(1 << 3);
- this->IO_ADDR_W &= ~(1 << 3);
- break;
-
- case NAND_CTL_SETNCE:
- break;
- case NAND_CTL_CLRNCE:
- break;
- }
+ struct nand_chip *chip = mtd->priv;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1));
}
/*
@@ -101,7 +83,7 @@ static int h1910_device_ready(struct mtd_info *mtd)
/*
* Main initialization routine
*/
-static int __init h1910_init (void)
+static int __init h1910_init(void)
{
struct nand_chip *this;
const char *part_type = 0;
@@ -119,24 +101,23 @@ static int __init h1910_init (void)
}
/* Allocate memory for MTD device structure and private data */
- h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) +
- sizeof(struct nand_chip),
- GFP_KERNEL);
+ h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!h1910_nand_mtd) {
printk("Unable to allocate h1910 NAND MTD device structure.\n");
- iounmap ((void *) nandaddr);
+ iounmap((void *)nandaddr);
return -ENOMEM;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&h1910_nand_mtd[1]);
+ this = (struct nand_chip *)(&h1910_nand_mtd[1]);
/* Initialize structures */
- memset((char *) h1910_nand_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(h1910_nand_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
h1910_nand_mtd->priv = this;
+ h1910_nand_mtd->owner = THIS_MODULE;
/*
* Enable VPEN
@@ -146,31 +127,28 @@ static int __init h1910_init (void)
/* insert callbacks */
this->IO_ADDR_R = nandaddr;
this->IO_ADDR_W = nandaddr;
- this->hwcontrol = h1910_hwcontrol;
+ this->cmd_ctrl = h1910_hwcontrol;
this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */
/* 15 us command delay time */
this->chip_delay = 50;
- this->eccmode = NAND_ECC_SOFT;
+ this->ecc.mode = NAND_ECC_SOFT;
this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
- if (nand_scan (h1910_nand_mtd, 1)) {
+ if (nand_scan(h1910_nand_mtd, 1)) {
printk(KERN_NOTICE "No NAND device - returning -ENXIO\n");
- kfree (h1910_nand_mtd);
- iounmap ((void *) nandaddr);
+ kfree(h1910_nand_mtd);
+ iounmap((void *)nandaddr);
return -ENXIO;
}
-
#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts,
- "h1910-nand");
+ mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
if (mtd_parts_nb > 0)
- part_type = "command line";
+ part_type = "command line";
else
- mtd_parts_nb = 0;
+ mtd_parts_nb = 0;
#endif
- if (mtd_parts_nb == 0)
- {
+ if (mtd_parts_nb == 0) {
mtd_parts = partition_info;
mtd_parts_nb = NUM_PARTITIONS;
part_type = "static";
@@ -183,24 +161,26 @@ static int __init h1910_init (void)
/* Return happy */
return 0;
}
+
module_init(h1910_init);
/*
* Clean up routine
*/
-static void __exit h1910_cleanup (void)
+static void __exit h1910_cleanup(void)
{
- struct nand_chip *this = (struct nand_chip *) &h1910_nand_mtd[1];
+ struct nand_chip *this = (struct nand_chip *)&h1910_nand_mtd[1];
/* Release resources, unregister device */
- nand_release (h1910_nand_mtd);
+ nand_release(h1910_nand_mtd);
/* Release io resource */
- iounmap ((void *) this->IO_ADDR_W);
+ iounmap((void *)this->IO_ADDR_W);
/* Free the MTD device structure */
- kfree (h1910_nand_mtd);
+ kfree(h1910_nand_mtd);
}
+
module_exit(h1910_cleanup);
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 95e96fa1fce..27083ed0a01 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -10,67 +10,31 @@
* http://www.linux-mtd.infradead.org/tech/nand.html
*
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- * 2002 Thomas Gleixner (tglx@linutronix.de)
+ * 2002-2006 Thomas Gleixner (tglx@linutronix.de)
*
- * 02-08-2004 tglx: support for strange chips, which cannot auto increment
- * pages on read / read_oob
- *
- * 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes
- * pointed this out, as he marked an auto increment capable chip
- * as NOAUTOINCR in the board driver.
- * Make reads over block boundaries work too
- *
- * 04-14-2004 tglx: first working version for 2k page size chips
- *
- * 05-19-2004 tglx: Basic support for Renesas AG-AND chips
- *
- * 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared
- * among multiple independend devices. Suggestions and initial patch
- * from Ben Dooks <ben-mtd@fluff.org>
- *
- * 12-05-2004 dmarlin: add workaround for Renesas AG-AND chips "disturb" issue.
- * Basically, any block not rewritten may lose data when surrounding blocks
- * are rewritten many times. JFFS2 ensures this doesn't happen for blocks
- * it uses, but the Bad Block Table(s) may not be rewritten. To ensure they
- * do not lose data, force them to be rewritten when some of the surrounding
- * blocks are erased. Rather than tracking a specific nearby block (which
- * could itself go bad), use a page address 'mask' to select several blocks
- * in the same area, and rewrite the BBT when any of them are erased.
- *
- * 01-03-2005 dmarlin: added support for the device recovery command sequence for Renesas
- * AG-AND chips. If there was a sudden loss of power during an erase operation,
- * a "device recovery" operation must be performed when power is restored
- * to ensure correct operation.
- *
- * 01-20-2005 dmarlin: added support for optional hardware specific callback routine to
- * perform extra error status checks on erase and write failures. This required
- * adding a wrapper function for nand_read_ecc.
- *
- * 08-20-2005 vwool: suspend/resume added
- *
- * Credits:
+ * Credits:
* David Woodhouse for adding multichip support
*
* Aleph One Ltd. and Toby Churchill Ltd. for supporting the
* rework for 2K page size chips
*
- * TODO:
+ * TODO:
* Enable cached programming for 2k page size chips
* Check, if mtd->ecctype should be set to MTD_ECC_HW
* if we have HW ecc support.
* The AG-AND chips have nice features for speed improvement,
* which are not supported yet. Read / program 4 pages in one go.
*
- * $Id: nand_base.c,v 1.150 2005/09/15 13:58:48 vwool Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -88,75 +52,46 @@
#endif
/* Define default oob placement schemes for large and small page devices */
-static struct nand_oobinfo nand_oob_8 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_8 = {
.eccbytes = 3,
.eccpos = {0, 1, 2},
- .oobfree = { {3, 2}, {6, 2} }
+ .oobfree = {
+ {.offset = 3,
+ .length = 2},
+ {.offset = 6,
+ .length = 2}}
};
-static struct nand_oobinfo nand_oob_16 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_16 = {
.eccbytes = 6,
.eccpos = {0, 1, 2, 3, 6, 7},
- .oobfree = { {8, 8} }
+ .oobfree = {
+ {.offset = 8,
+ . length = 8}}
};
-static struct nand_oobinfo nand_oob_64 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout nand_oob_64 = {
.eccbytes = 24,
.eccpos = {
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = { {2, 38} }
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = {
+ {.offset = 2,
+ .length = 38}}
};
-/* This is used for padding purposes in nand_write_oob */
-static u_char ffchars[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-};
+static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
+ int new_state);
+
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
/*
- * NAND low-level MTD interface functions
+ * For devices which display every fart in the system on a seperate LED. Is
+ * compiled away when LED support is disabled.
*/
-static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-
-static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
-static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
- size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
-static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t * retlen);
-static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-static int nand_erase (struct mtd_info *mtd, struct erase_info *instr);
-static void nand_sync (struct mtd_info *mtd);
-
-/* Some internal functions */
-static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,
- struct nand_oobinfo *oobsel, int mode);
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
- u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
-#else
-#define nand_verify_pages(...) (0)
-#endif
-
-static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);
+DEFINE_LED_TRIGGER(nand_led_trigger);
/**
* nand_release_device - [GENERIC] release chip
@@ -164,27 +99,19 @@ static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int ne
*
* Deselect, release chip lock and wake up anyone waiting on the device
*/
-static void nand_release_device (struct mtd_info *mtd)
+static void nand_release_device(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* De-select the NAND device */
- this->select_chip(mtd, -1);
-
- if (this->controller) {
- /* Release the controller and the chip */
- spin_lock(&this->controller->lock);
- this->controller->active = NULL;
- this->state = FL_READY;
- wake_up(&this->controller->wq);
- spin_unlock(&this->controller->lock);
- } else {
- /* Release the chip */
- spin_lock(&this->chip_lock);
- this->state = FL_READY;
- wake_up(&this->wq);
- spin_unlock(&this->chip_lock);
- }
+ chip->select_chip(mtd, -1);
+
+ /* Release the controller and the chip */
+ spin_lock(&chip->controller->lock);
+ chip->controller->active = NULL;
+ chip->state = FL_READY;
+ wake_up(&chip->controller->wq);
+ spin_unlock(&chip->controller->lock);
}
/**
@@ -193,23 +120,10 @@ static void nand_release_device (struct mtd_info *mtd)
*
* Default read function for 8bit buswith
*/
-static u_char nand_read_byte(struct mtd_info *mtd)
-{
- struct nand_chip *this = mtd->priv;
- return readb(this->IO_ADDR_R);
-}
-
-/**
- * nand_write_byte - [DEFAULT] write one byte to the chip
- * @mtd: MTD device structure
- * @byte: pointer to data byte to write
- *
- * Default write function for 8it buswith
- */
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+static uint8_t nand_read_byte(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- writeb(byte, this->IO_ADDR_W);
+ struct nand_chip *chip = mtd->priv;
+ return readb(chip->IO_ADDR_R);
}
/**
@@ -219,24 +133,10 @@ static void nand_write_byte(struct mtd_info *mtd, u_char byte)
* Default read function for 16bit buswith with
* endianess conversion
*/
-static u_char nand_read_byte16(struct mtd_info *mtd)
+static uint8_t nand_read_byte16(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- return (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
-}
-
-/**
- * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip
- * @mtd: MTD device structure
- * @byte: pointer to data byte to write
- *
- * Default write function for 16bit buswith with
- * endianess conversion
- */
-static void nand_write_byte16(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *this = mtd->priv;
- writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
+ struct nand_chip *chip = mtd->priv;
+ return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R));
}
/**
@@ -248,22 +148,8 @@ static void nand_write_byte16(struct mtd_info *mtd, u_char byte)
*/
static u16 nand_read_word(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- return readw(this->IO_ADDR_R);
-}
-
-/**
- * nand_write_word - [DEFAULT] write one word to the chip
- * @mtd: MTD device structure
- * @word: data word to write
- *
- * Default write function for 16bit buswith without
- * endianess conversion
- */
-static void nand_write_word(struct mtd_info *mtd, u16 word)
-{
- struct nand_chip *this = mtd->priv;
- writew(word, this->IO_ADDR_W);
+ struct nand_chip *chip = mtd->priv;
+ return readw(chip->IO_ADDR_R);
}
/**
@@ -273,15 +159,15 @@ static void nand_write_word(struct mtd_info *mtd, u16 word)
*
* Default select function for 1 chip devices.
*/
-static void nand_select_chip(struct mtd_info *mtd, int chip)
+static void nand_select_chip(struct mtd_info *mtd, int chipnr)
{
- struct nand_chip *this = mtd->priv;
- switch(chip) {
+ struct nand_chip *chip = mtd->priv;
+
+ switch (chipnr) {
case -1:
- this->hwcontrol(mtd, NAND_CTL_CLRNCE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
break;
case 0:
- this->hwcontrol(mtd, NAND_CTL_SETNCE);
break;
default:
@@ -297,13 +183,13 @@ static void nand_select_chip(struct mtd_info *mtd, int chip)
*
* Default write function for 8bit buswith
*/
-static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- for (i=0; i<len; i++)
- writeb(buf[i], this->IO_ADDR_W);
+ for (i = 0; i < len; i++)
+ writeb(buf[i], chip->IO_ADDR_W);
}
/**
@@ -314,13 +200,13 @@ static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
*
* Default read function for 8bit buswith
*/
-static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- for (i=0; i<len; i++)
- buf[i] = readb(this->IO_ADDR_R);
+ for (i = 0; i < len; i++)
+ buf[i] = readb(chip->IO_ADDR_R);
}
/**
@@ -331,15 +217,14 @@ static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
*
* Default verify function for 8bit buswith
*/
-static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- for (i=0; i<len; i++)
- if (buf[i] != readb(this->IO_ADDR_R))
+ for (i = 0; i < len; i++)
+ if (buf[i] != readb(chip->IO_ADDR_R))
return -EFAULT;
-
return 0;
}
@@ -351,15 +236,15 @@ static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
*
* Default write function for 16bit buswith
*/
-static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++)
- writew(p[i], this->IO_ADDR_W);
+ for (i = 0; i < len; i++)
+ writew(p[i], chip->IO_ADDR_W);
}
@@ -371,15 +256,15 @@ static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
*
* Default read function for 16bit buswith
*/
-static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++)
- p[i] = readw(this->IO_ADDR_R);
+ for (i = 0; i < len; i++)
+ p[i] = readw(chip->IO_ADDR_R);
}
/**
@@ -390,15 +275,15 @@ static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
*
* Default verify function for 16bit buswith
*/
-static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
- for (i=0; i<len; i++)
- if (p[i] != readw(this->IO_ADDR_R))
+ for (i = 0; i < len; i++)
+ if (p[i] != readw(chip->IO_ADDR_R))
return -EFAULT;
return 0;
@@ -415,38 +300,37 @@ static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
{
int page, chipnr, res = 0;
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
u16 bad;
if (getchip) {
- page = (int)(ofs >> this->page_shift);
- chipnr = (int)(ofs >> this->chip_shift);
+ page = (int)(ofs >> chip->page_shift);
+ chipnr = (int)(ofs >> chip->chip_shift);
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_READING);
+ nand_get_device(chip, mtd, FL_READING);
/* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ chip->select_chip(mtd, chipnr);
} else
- page = (int) ofs;
+ page = (int)ofs;
- if (this->options & NAND_BUSWIDTH_16) {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
- bad = cpu_to_le16(this->read_word(mtd));
- if (this->badblockpos & 0x1)
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE,
+ page & chip->pagemask);
+ bad = cpu_to_le16(chip->read_word(mtd));
+ if (chip->badblockpos & 0x1)
bad >>= 8;
if ((bad & 0xFF) != 0xff)
res = 1;
} else {
- this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);
- if (this->read_byte(mtd) != 0xff)
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,
+ page & chip->pagemask);
+ if (chip->read_byte(mtd) != 0xff)
res = 1;
}
- if (getchip) {
- /* Deselect and wake up anyone waiting on the device */
+ if (getchip)
nand_release_device(mtd);
- }
return res;
}
@@ -461,23 +345,33 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct nand_chip *this = mtd->priv;
- u_char buf[2] = {0, 0};
- size_t retlen;
- int block;
+ struct nand_chip *chip = mtd->priv;
+ uint8_t buf[2] = { 0, 0 };
+ int block, ret;
/* Get block number */
- block = ((int) ofs) >> this->bbt_erase_shift;
- if (this->bbt)
- this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+ block = ((int)ofs) >> chip->bbt_erase_shift;
+ if (chip->bbt)
+ chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* Do we have a flash based bad block table ? */
- if (this->options & NAND_USE_FLASH_BBT)
- return nand_update_bbt (mtd, ofs);
+ if (chip->options & NAND_USE_FLASH_BBT)
+ ret = nand_update_bbt(mtd, ofs);
+ else {
+ /* We write two bytes, so we dont have to mess with 16 bit
+ * access
+ */
+ ofs += mtd->oobsize;
+ chip->ops.len = 2;
+ chip->ops.datbuf = NULL;
+ chip->ops.oobbuf = buf;
+ chip->ops.ooboffs = chip->badblockpos & ~0x01;
- /* We write two bytes, so we dont have to mess with 16 bit access */
- ofs += mtd->oobsize + (this->badblockpos & ~0x01);
- return nand_write_oob (mtd, ofs , 2, &retlen, buf);
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ }
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+ return ret;
}
/**
@@ -487,12 +381,12 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
*
* The function expects, that the device is already selected
*/
-static int nand_check_wp (struct mtd_info *mtd)
+static int nand_check_wp(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* Check the WP bit */
- this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
- return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
}
/**
@@ -505,32 +399,31 @@ static int nand_check_wp (struct mtd_info *mtd)
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
*/
-static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
+ int allowbbt)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- if (!this->bbt)
- return this->block_bad(mtd, ofs, getchip);
+ if (!chip->bbt)
+ return chip->block_bad(mtd, ofs, getchip);
/* Return info from the table */
- return nand_isbad_bbt (mtd, ofs, allowbbt);
+ return nand_isbad_bbt(mtd, ofs, allowbbt);
}
-DEFINE_LED_TRIGGER(nand_led_trigger);
-
/*
* Wait for the ready pin, after a command
* The timeout is catched later.
*/
static void nand_wait_ready(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- unsigned long timeo = jiffies + 2;
+ struct nand_chip *chip = mtd->priv;
+ unsigned long timeo = jiffies + 2;
led_trigger_event(nand_led_trigger, LED_FULL);
/* wait until command is processed or timeout occures */
do {
- if (this->dev_ready(mtd))
+ if (chip->dev_ready(mtd))
break;
touch_softlockup_watchdog();
} while (time_before(jiffies, timeo));
@@ -547,21 +440,21 @@ static void nand_wait_ready(struct mtd_info *mtd)
* Send command to NAND device. This function is used for small page
* devices (256/512 Bytes per page)
*/
-static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+static void nand_command(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
{
- register struct nand_chip *this = mtd->priv;
+ register struct nand_chip *chip = mtd->priv;
+ int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
/*
* Write out the command to the device.
*/
if (command == NAND_CMD_SEQIN) {
int readcmd;
- if (column >= mtd->oobblock) {
+ if (column >= mtd->writesize) {
/* OOB area */
- column -= mtd->oobblock;
+ column -= mtd->writesize;
readcmd = NAND_CMD_READOOB;
} else if (column < 256) {
/* First 256 bytes --> READ0 */
@@ -570,38 +463,37 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
column -= 256;
readcmd = NAND_CMD_READ1;
}
- this->write_byte(mtd, readcmd);
+ chip->cmd_ctrl(mtd, readcmd, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
}
- this->write_byte(mtd, command);
-
- /* Set ALE and clear CLE to start address cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ chip->cmd_ctrl(mtd, command, ctrl);
- if (column != -1 || page_addr != -1) {
- this->hwcontrol(mtd, NAND_CTL_SETALE);
-
- /* Serially input address */
- if (column != -1) {
- /* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
- column >>= 1;
- this->write_byte(mtd, column);
- }
- if (page_addr != -1) {
- this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
- this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
- /* One more address cycle for devices > 32MiB */
- if (this->chipsize > (32 << 20))
- this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
- }
- /* Latch in address */
- this->hwcontrol(mtd, NAND_CTL_CLRALE);
+ /*
+ * Address cycle, when necessary
+ */
+ ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (chip->options & NAND_BUSWIDTH_16)
+ column >>= 1;
+ chip->cmd_ctrl(mtd, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ }
+ if (page_addr != -1) {
+ chip->cmd_ctrl(mtd, page_addr, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ chip->cmd_ctrl(mtd, page_addr >> 8, ctrl);
+ /* One more address cycle for devices > 32MiB */
+ if (chip->chipsize > (32 << 20))
+ chip->cmd_ctrl(mtd, page_addr >> 16, ctrl);
}
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* program and erase have their own busy handlers
* status and sequential in needs no delay
- */
+ */
switch (command) {
case NAND_CMD_PAGEPROG:
@@ -612,29 +504,30 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
return;
case NAND_CMD_RESET:
- if (this->dev_ready)
+ if (chip->dev_ready)
break;
- udelay(this->chip_delay);
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_STATUS);
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
+ udelay(chip->chip_delay);
+ chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd,
+ NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
return;
- /* This applies to read commands */
+ /* This applies to read commands */
default:
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
- if (!this->dev_ready) {
- udelay (this->chip_delay);
+ */
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
return;
}
}
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
+ ndelay(100);
nand_wait_ready(mtd);
}
@@ -646,50 +539,49 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
* @column: the column address for this command, -1 if none
* @page_addr: the page address for this command, -1 if none
*
- * Send command to NAND device. This is the version for the new large page devices
- * We dont have the seperate regions as we have in the small page devices.
- * We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * Send command to NAND device. This is the version for the new large page
+ * devices We dont have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
*
*/
-static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
{
- register struct nand_chip *this = mtd->priv;
+ register struct nand_chip *chip = mtd->priv;
/* Emulate NAND_CMD_READOOB */
if (command == NAND_CMD_READOOB) {
- column += mtd->oobblock;
+ column += mtd->writesize;
command = NAND_CMD_READ0;
}
-
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- /* Write out the command to the device. */
- this->write_byte(mtd, (command & 0xff));
- /* End command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ /* Command latch cycle */
+ chip->cmd_ctrl(mtd, command & 0xff,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
if (column != -1 || page_addr != -1) {
- this->hwcontrol(mtd, NAND_CTL_SETALE);
+ int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
+ if (chip->options & NAND_BUSWIDTH_16)
column >>= 1;
- this->write_byte(mtd, column & 0xff);
- this->write_byte(mtd, column >> 8);
+ chip->cmd_ctrl(mtd, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ chip->cmd_ctrl(mtd, column >> 8, ctrl);
}
if (page_addr != -1) {
- this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
- this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+ chip->cmd_ctrl(mtd, page_addr, ctrl);
+ chip->cmd_ctrl(mtd, page_addr >> 8,
+ NAND_NCE | NAND_ALE);
/* One more address cycle for devices > 128MiB */
- if (this->chipsize > (128 << 20))
- this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff));
+ if (chip->chipsize > (128 << 20))
+ chip->cmd_ctrl(mtd, page_addr >> 16,
+ NAND_NCE | NAND_ALE);
}
- /* Latch in address */
- this->hwcontrol(mtd, NAND_CTL_CLRALE);
}
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* program and erase have their own busy handlers
@@ -702,55 +594,62 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
case NAND_CMD_STATUS:
case NAND_CMD_DEPLETE1:
return;
- /*
- * read error status commands require only a short delay
- */
+ /*
+ * read error status commands require only a short delay
+ */
case NAND_CMD_STATUS_ERROR:
case NAND_CMD_STATUS_ERROR0:
case NAND_CMD_STATUS_ERROR1:
case NAND_CMD_STATUS_ERROR2:
case NAND_CMD_STATUS_ERROR3:
- udelay(this->chip_delay);
+ udelay(chip->chip_delay);
return;
case NAND_CMD_RESET:
- if (this->dev_ready)
+ if (chip->dev_ready)
break;
- udelay(this->chip_delay);
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_STATUS);
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
+ udelay(chip->chip_delay);
+ chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+ while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ;
+ return;
+
+ case NAND_CMD_RNDOUT:
+ /* No ready / busy check necessary */
+ chip->cmd_ctrl(mtd, NAND_CMD_RNDOUTSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
return;
case NAND_CMD_READ0:
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- /* Write out the start read command */
- this->write_byte(mtd, NAND_CMD_READSTART);
- /* End command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- /* Fall through into ready check */
-
- /* This applies to read commands */
+ chip->cmd_ctrl(mtd, NAND_CMD_READSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ /* This applies to read commands */
default:
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
- if (!this->dev_ready) {
- udelay (this->chip_delay);
+ */
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
return;
}
}
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
+ ndelay(100);
nand_wait_ready(mtd);
}
@@ -763,34 +662,28 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
*
* Get the device and lock it for exclusive access
*/
-static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
+static int
+nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
{
- struct nand_chip *active;
- spinlock_t *lock;
- wait_queue_head_t *wq;
- DECLARE_WAITQUEUE (wait, current);
-
- lock = (this->controller) ? &this->controller->lock : &this->chip_lock;
- wq = (this->controller) ? &this->controller->wq : &this->wq;
-retry:
- active = this;
+ spinlock_t *lock = &chip->controller->lock;
+ wait_queue_head_t *wq = &chip->controller->wq;
+ DECLARE_WAITQUEUE(wait, current);
+ retry:
spin_lock(lock);
/* Hardware controller shared among independend devices */
- if (this->controller) {
- if (this->controller->active)
- active = this->controller->active;
- else
- this->controller->active = this;
- }
- if (active == this && this->state == FL_READY) {
- this->state = new_state;
+ /* Hardware controller shared among independend devices */
+ if (!chip->controller->active)
+ chip->controller->active = chip;
+
+ if (chip->controller->active == chip && chip->state == FL_READY) {
+ chip->state = new_state;
spin_unlock(lock);
return 0;
}
if (new_state == FL_PM_SUSPENDED) {
spin_unlock(lock);
- return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
+ return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
}
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(wq, &wait);
@@ -804,540 +697,339 @@ retry:
* nand_wait - [DEFAULT] wait until the command is done
* @mtd: MTD device structure
* @this: NAND chip structure
- * @state: state to select the max. timeout value
*
* Wait for command done. This applies to erase and program only
* Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
*
*/
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
- unsigned long timeo = jiffies;
- int status;
+ unsigned long timeo = jiffies;
+ int status, state = chip->state;
if (state == FL_ERASING)
- timeo += (HZ * 400) / 1000;
+ timeo += (HZ * 400) / 1000;
else
- timeo += (HZ * 20) / 1000;
+ timeo += (HZ * 20) / 1000;
led_trigger_event(nand_led_trigger, LED_FULL);
/* Apply this short delay always to ensure that we do wait tWB in
* any case on any machine. */
- ndelay (100);
+ ndelay(100);
- if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
- this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1);
+ if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
+ chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
else
- this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
while (time_before(jiffies, timeo)) {
- /* Check, if we were interrupted */
- if (this->state != state)
- return 0;
-
- if (this->dev_ready) {
- if (this->dev_ready(mtd))
+ if (chip->dev_ready) {
+ if (chip->dev_ready(mtd))
break;
} else {
- if (this->read_byte(mtd) & NAND_STATUS_READY)
+ if (chip->read_byte(mtd) & NAND_STATUS_READY)
break;
}
cond_resched();
}
led_trigger_event(nand_led_trigger, LED_OFF);
- status = (int) this->read_byte(mtd);
+ status = (int)chip->read_byte(mtd);
return status;
}
/**
- * nand_write_page - [GENERIC] write one page
- * @mtd: MTD device structure
- * @this: NAND chip structure
- * @page: startpage inside the chip, must be called with (page & this->pagemask)
- * @oob_buf: out of band data buffer
- * @oobsel: out of band selecttion structre
- * @cached: 1 = enable cached programming if supported by chip
- *
- * Nand_page_program function is used for write and writev !
- * This function will always program a full page of data
- * If you call it with a non page aligned buffer, you're lost :)
- *
- * Cached programming is not supported yet.
+ * nand_read_page_raw - [Intern] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
*/
-static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page,
- u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
+static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
{
- int i, status;
- u_char ecc_code[32];
- int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
- int *oob_config = oobsel->eccpos;
- int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
- int eccbytes = 0;
-
- /* FIXME: Enable cached programming */
- cached = 0;
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
- /* Send command to begin auto page programming */
- this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page);
+/**
+ * nand_read_page_swecc - {REPLACABLE] software ecc based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ */
+static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers.ecccalc;
+ uint8_t *ecc_code = chip->buffers.ecccode;
+ int *eccpos = chip->ecc.layout->eccpos;
- /* Write out complete page of data, take care of eccmode */
- switch (eccmode) {
- /* No ecc, write all */
- case NAND_ECC_NONE:
- printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
- this->write_buf(mtd, this->data_poi, mtd->oobblock);
- break;
+ nand_read_page_raw(mtd, chip, buf);
- /* Software ecc 3/256, write all */
- case NAND_ECC_SOFT:
- for (; eccsteps; eccsteps--) {
- this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
- for (i = 0; i < 3; i++, eccidx++)
- oob_buf[oob_config[eccidx]] = ecc_code[i];
- datidx += this->eccsize;
- }
- this->write_buf(mtd, this->data_poi, mtd->oobblock);
- break;
- default:
- eccbytes = this->eccbytes;
- for (; eccsteps; eccsteps--) {
- /* enable hardware ecc logic for write */
- this->enable_hwecc(mtd, NAND_ECC_WRITE);
- this->write_buf(mtd, &this->data_poi[datidx], this->eccsize);
- this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
- for (i = 0; i < eccbytes; i++, eccidx++)
- oob_buf[oob_config[eccidx]] = ecc_code[i];
- /* If the hardware ecc provides syndromes then
- * the ecc code must be written immidiately after
- * the data bytes (words) */
- if (this->options & NAND_HWECC_SYNDROME)
- this->write_buf(mtd, ecc_code, eccbytes);
- datidx += this->eccsize;
- }
- break;
- }
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- /* Write out OOB data */
- if (this->options & NAND_HWECC_SYNDROME)
- this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes);
- else
- this->write_buf(mtd, oob_buf, mtd->oobsize);
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
- /* Send command to actually program the data */
- this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1);
+ eccsteps = chip->ecc.steps;
+ p = buf;
- if (!cached) {
- /* call wait ready function */
- status = this->waitfunc (mtd, this, FL_WRITING);
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
- /* See if operation failed and additional status checks are available */
- if ((status & NAND_STATUS_FAIL) && (this->errstat)) {
- status = this->errstat(mtd, this, FL_WRITING, status, page);
- }
-
- /* See if device thinks it succeeded */
- if (status & NAND_STATUS_FAIL) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
- return -EIO;
- }
- } else {
- /* FIXME: Implement cached programming ! */
- /* wait until cache is ready*/
- // status = this->waitfunc (mtd, this, FL_CACHEDRPG);
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat == -1)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
}
return 0;
}
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
/**
- * nand_verify_pages - [GENERIC] verify the chip contents after a write
- * @mtd: MTD device structure
- * @this: NAND chip structure
- * @page: startpage inside the chip, must be called with (page & this->pagemask)
- * @numpages: number of pages to verify
- * @oob_buf: out of band data buffer
- * @oobsel: out of band selecttion structre
- * @chipnr: number of the current chip
- * @oobmode: 1 = full buffer verify, 0 = ecc only
+ * nand_read_page_hwecc - {REPLACABLE] hardware ecc based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
*
- * The NAND device assumes that it is always writing to a cleanly erased page.
- * Hence, it performs its internal write verification only on bits that
- * transitioned from 1 to 0. The device does NOT verify the whole page on a
- * byte by byte basis. It is possible that the page was not completely erased
- * or the page is becoming unusable due to wear. The read with ECC would catch
- * the error later when the ECC page check fails, but we would rather catch
- * it early in the page write stage. Better to write no data than invalid data.
+ * Not for syndrome calculating ecc controllers which need a special oob layout
*/
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
- u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
+static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
{
- int i, j, datidx = 0, oobofs = 0, res = -EIO;
- int eccsteps = this->eccsteps;
- int hweccbytes;
- u_char oobdata[64];
-
- hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
-
- /* Send command to read back the first page */
- this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
-
- for(;;) {
- for (j = 0; j < eccsteps; j++) {
- /* Loop through and verify the data */
- if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
- goto out;
- }
- datidx += mtd->eccsize;
- /* Have we a hw generator layout ? */
- if (!hweccbytes)
- continue;
- if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
- goto out;
- }
- oobofs += hweccbytes;
- }
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers.ecccalc;
+ uint8_t *ecc_code = chip->buffers.ecccode;
+ int *eccpos = chip->ecc.layout->eccpos;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+ }
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- /* check, if we must compare all data or if we just have to
- * compare the ecc bytes
- */
- if (oobmode) {
- if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) {
- DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
- goto out;
- }
- } else {
- /* Read always, else autoincrement fails */
- this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps);
-
- if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) {
- int ecccnt = oobsel->eccbytes;
-
- for (i = 0; i < ecccnt; i++) {
- int idx = oobsel->eccpos[i];
- if (oobdata[idx] != oob_buf[oobofs + idx] ) {
- DEBUG (MTD_DEBUG_LEVEL0,
- "%s: Failed ECC write "
- "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
- goto out;
- }
- }
- }
- }
- oobofs += mtd->oobsize - hweccbytes * eccsteps;
- page++;
- numpages--;
-
- /* Apply delay or wait for ready/busy pin
- * Do this before the AUTOINCR check, so no problems
- * arise if a chip which does auto increment
- * is marked as NOAUTOINCR by the board driver.
- * Do this also before returning, so the chip is
- * ready for the next command.
- */
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- nand_wait_ready(mtd);
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
- /* All done, return happy */
- if (!numpages)
- return 0;
+ eccsteps = chip->ecc.steps;
+ p = buf;
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
- /* Check, if the chip supports auto page increment */
- if (!NAND_CANAUTOINCR(this))
- this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat == -1)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
}
- /*
- * Terminate the read command. We come here in case of an error
- * So we must issue a reset command.
- */
-out:
- this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1);
- return res;
+ return 0;
}
-#endif
/**
- * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
+ * nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
*
- * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL
- * and flags = 0xff
+ * The hw generator calculates the error syndrome automatically. Therefor
+ * we need a special oob layout and handling.
*/
-static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
+static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
{
- return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff);
-}
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
+ chip->read_buf(mtd, oob, eccbytes);
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+ if (stat == -1)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->read_buf(mtd, oob, i);
+ return 0;
+}
/**
- * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
- * @oob_buf: filesystem supplied oob data buffer
- * @oobsel: oob selection structure
- *
- * This function simply calls nand_do_read_ecc with flags = 0xff
+ * nand_transfer_oob - [Internal] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @ops: oob ops structure
*/
-static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
+static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
+ struct mtd_oob_ops *ops)
{
- /* use userspace supplied oobinfo, if zero */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
- return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff);
+ size_t len = ops->ooblen;
+
+ switch(ops->mode) {
+
+ case MTD_OOB_PLACE:
+ case MTD_OOB_RAW:
+ memcpy(oob, chip->oob_poi + ops->ooboffs, len);
+ return oob + len;
+
+ case MTD_OOB_AUTO: {
+ struct nand_oobfree *free = chip->ecc.layout->oobfree;
+ uint32_t boffs = 0, roffs = ops->ooboffs;
+ size_t bytes = 0;
+
+ for(; free->length && len; free++, len -= bytes) {
+ /* Read request not from offset 0 ? */
+ if (unlikely(roffs)) {
+ if (roffs >= free->length) {
+ roffs -= free->length;
+ continue;
+ }
+ boffs = free->offset + roffs;
+ bytes = min_t(size_t, len,
+ (free->length - roffs));
+ roffs = 0;
+ } else {
+ bytes = min_t(size_t, len, free->length);
+ boffs = free->offset;
+ }
+ memcpy(oob, chip->oob_poi + boffs, bytes);
+ oob += bytes;
+ }
+ return oob;
+ }
+ default:
+ BUG();
+ }
+ return NULL;
}
-
/**
- * nand_do_read_ecc - [MTD Interface] Read data with ECC
+ * nand_do_read_ops - [Internal] Read data with ECC
+ *
* @mtd: MTD device structure
* @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
- * @oob_buf: filesystem supplied oob data buffer (can be NULL)
- * @oobsel: oob selection structure
- * @flags: flag to indicate if nand_get_device/nand_release_device should be preformed
- * and how many corrected error bits are acceptable:
- * bits 0..7 - number of tolerable errors
- * bit 8 - 0 == do not get/release chip, 1 == get/release chip
*
- * NAND read with ECC
+ * Internal function. Called with chip held.
*/
-int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf, u_char * oob_buf,
- struct nand_oobinfo *oobsel, int flags)
+static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
+ int chipnr, page, realpage, col, bytes, aligned;
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_ecc_stats stats;
+ int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+ int sndcmd = 1;
+ int ret = 0;
+ uint32_t readlen = ops->len;
+ uint8_t *bufpoi, *oob, *buf;
- int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1;
- int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
- struct nand_chip *this = mtd->priv;
- u_char *data_poi, *oob_data = oob_buf;
- u_char ecc_calc[32];
- u_char ecc_code[32];
- int eccmode, eccsteps;
- int *oob_config, datidx;
- int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
- int eccbytes;
- int compareecc = 1;
- int oobreadlen;
-
-
- DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-
- /* Do not allow reads past end of device */
- if ((from + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
- *retlen = 0;
- return -EINVAL;
- }
-
- /* Grab the lock and see if the device is available */
- if (flags & NAND_GET_DEVICE)
- nand_get_device (this, mtd, FL_READING);
-
- /* Autoplace of oob data ? Use the default placement scheme */
- if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
- oobsel = this->autooob;
-
- eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
- oob_config = oobsel->eccpos;
-
- /* Select the NAND device */
- chipnr = (int)(from >> this->chip_shift);
- this->select_chip(mtd, chipnr);
-
- /* First we calculate the starting page */
- realpage = (int) (from >> this->page_shift);
- page = realpage & this->pagemask;
-
- /* Get raw starting column */
- col = from & (mtd->oobblock - 1);
-
- end = mtd->oobblock;
- ecc = this->eccsize;
- eccbytes = this->eccbytes;
-
- if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME))
- compareecc = 0;
-
- oobreadlen = mtd->oobsize;
- if (this->options & NAND_HWECC_SYNDROME)
- oobreadlen -= oobsel->eccbytes;
+ stats = mtd->ecc_stats;
- /* Loop until all data read */
- while (read < len) {
+ chipnr = (int)(from >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
- int aligned = (!col && (len - read) >= end);
- /*
- * If the read is not page aligned, we have to read into data buffer
- * due to ecc, else we read into return buffer direct
- */
- if (aligned)
- data_poi = &buf[read];
- else
- data_poi = this->data_buf;
+ realpage = (int)(from >> chip->page_shift);
+ page = realpage & chip->pagemask;
- /* Check, if we have this page in the buffer
- *
- * FIXME: Make it work when we must provide oob data too,
- * check the usage of data_buf oob field
- */
- if (realpage == this->pagebuf && !oob_buf) {
- /* aligned read ? */
- if (aligned)
- memcpy (data_poi, this->data_buf, end);
- goto readdata;
- }
+ col = (int)(from & (mtd->writesize - 1));
+ chip->oob_poi = chip->buffers.oobrbuf;
- /* Check, if we must send the read command */
- if (sndcmd) {
- this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
- sndcmd = 0;
- }
+ buf = ops->datbuf;
+ oob = ops->oobbuf;
- /* get oob area, if we have no oob buffer from fs-driver */
- if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
- oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
- oob_data = &this->data_buf[end];
+ while(1) {
+ bytes = min(mtd->writesize - col, readlen);
+ aligned = (bytes == mtd->writesize);
- eccsteps = this->eccsteps;
+ /* Is the current page in the buffer ? */
+ if (realpage != chip->pagebuf || oob) {
+ bufpoi = aligned ? buf : chip->buffers.databuf;
- switch (eccmode) {
- case NAND_ECC_NONE: { /* No ECC, Read in a page */
- static unsigned long lastwhinge = 0;
- if ((lastwhinge / HZ) != (jiffies / HZ)) {
- printk (KERN_WARNING "Reading data from NAND FLASH without ECC is not recommended\n");
- lastwhinge = jiffies;
+ if (likely(sndcmd)) {
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ sndcmd = 0;
}
- this->read_buf(mtd, data_poi, end);
- break;
- }
- case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
- this->read_buf(mtd, data_poi, end);
- for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc)
- this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
- break;
+ /* Now read the page into the buffer */
+ ret = chip->ecc.read_page(mtd, chip, bufpoi);
+ if (ret < 0)
+ break;
- default:
- for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) {
- this->enable_hwecc(mtd, NAND_ECC_READ);
- this->read_buf(mtd, &data_poi[datidx], ecc);
-
- /* HW ecc with syndrome calculation must read the
- * syndrome from flash immidiately after the data */
- if (!compareecc) {
- /* Some hw ecc generators need to know when the
- * syndrome is read from flash */
- this->enable_hwecc(mtd, NAND_ECC_READSYN);
- this->read_buf(mtd, &oob_data[i], eccbytes);
- /* We calc error correction directly, it checks the hw
- * generator for an error, reads back the syndrome and
- * does the error correction on the fly */
- ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]);
- if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
- "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
- ecc_failed++;
- }
- } else {
- this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
- }
+ /* Transfer not aligned data */
+ if (!aligned) {
+ chip->pagebuf = realpage;
+ memcpy(buf, chip->buffers.databuf + col, bytes);
}
- break;
- }
-
- /* read oobdata */
- this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen);
-
- /* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
- if (!compareecc)
- goto readoob;
-
- /* Pick the ECC bytes out of the oob data */
- for (j = 0; j < oobsel->eccbytes; j++)
- ecc_code[j] = oob_data[oob_config[j]];
- /* correct data, if neccecary */
- for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
- ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
+ buf += bytes;
- /* Get next chunk of ecc bytes */
- j += eccbytes;
-
- /* Check, if we have a fs supplied oob-buffer,
- * This is the legacy mode. Used by YAFFS1
- * Should go away some day
- */
- if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) {
- int *p = (int *)(&oob_data[mtd->oobsize]);
- p[i] = ecc_status;
+ if (unlikely(oob)) {
+ /* Raw mode does data:oob:data:oob */
+ if (ops->mode != MTD_OOB_RAW)
+ oob = nand_transfer_oob(chip, oob, ops);
+ else
+ buf = nand_transfer_oob(chip, buf, ops);
}
- if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
- ecc_failed++;
+ if (!(chip->options & NAND_NO_READRDY)) {
+ /*
+ * Apply delay or wait for ready/busy pin. Do
+ * this before the AUTOINCR check, so no
+ * problems arise if a chip which does auto
+ * increment is marked as NOAUTOINCR by the
+ * board driver.
+ */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
}
+ } else {
+ memcpy(buf, chip->buffers.databuf + col, bytes);
+ buf += bytes;
}
- readoob:
- /* check, if we have a fs supplied oob-buffer */
- if (oob_buf) {
- /* without autoplace. Legacy mode used by YAFFS1 */
- switch(oobsel->useecc) {
- case MTD_NANDECC_AUTOPLACE:
- case MTD_NANDECC_AUTOPL_USR:
- /* Walk through the autoplace chunks */
- for (i = 0; oobsel->oobfree[i][1]; i++) {
- int from = oobsel->oobfree[i][0];
- int num = oobsel->oobfree[i][1];
- memcpy(&oob_buf[oob], &oob_data[from], num);
- oob += num;
- }
- break;
- case MTD_NANDECC_PLACE:
- /* YAFFS1 legacy mode */
- oob_data += this->eccsteps * sizeof (int);
- default:
- oob_data += mtd->oobsize;
- }
- }
- readdata:
- /* Partial page read, transfer data into fs buffer */
- if (!aligned) {
- for (j = col; j < end && read < len; j++)
- buf[read++] = data_poi[j];
- this->pagebuf = realpage;
- } else
- read += mtd->oobblock;
-
- /* Apply delay or wait for ready/busy pin
- * Do this before the AUTOINCR check, so no problems
- * arise if a chip which does auto increment
- * is marked as NOAUTOINCR by the board driver.
- */
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- nand_wait_ready(mtd);
+ readlen -= bytes;
- if (read == len)
+ if (!readlen)
break;
/* For subsequent reads align to page boundary. */
@@ -1345,701 +1037,775 @@ int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
/* Increment page address */
realpage++;
- page = realpage & this->pagemask;
+ page = realpage & chip->pagemask;
/* Check, if we cross a chip boundary */
if (!page) {
chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
}
+
/* Check, if the chip supports auto page increment
* or if we have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
+ */
+ if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
- /* Deselect and wake up anyone waiting on the device */
- if (flags & NAND_GET_DEVICE)
- nand_release_device(mtd);
+ ops->retlen = ops->len - (size_t) readlen;
- /*
- * Return success, if no ECC failures, else -EBADMSG
- * fs driver will take care of that, because
- * retlen == desired len and result == -EBADMSG
- */
- *retlen = read;
- return ecc_failed ? -EBADMSG : 0;
+ if (ret)
+ return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
- * nand_read_oob - [MTD Interface] NAND read out-of-band
+ * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
* @mtd: MTD device structure
* @from: offset to read from
* @len: number of bytes to read
* @retlen: pointer to variable to store the number of read bytes
* @buf: the databuffer to put data
*
- * NAND read out-of-band data from the spare area
+ * Get hold of the chip and call nand_do_read
*/
-static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
+static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, uint8_t *buf)
{
- int i, col, page, chipnr;
- struct nand_chip *this = mtd->priv;
- int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+ struct nand_chip *chip = mtd->priv;
+ int ret;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ /* Do not allow reads past end of device */
+ if ((from + len) > mtd->size)
+ return -EINVAL;
+ if (!len)
+ return 0;
- /* Shift to get page */
- page = (int)(from >> this->page_shift);
- chipnr = (int)(from >> this->chip_shift);
+ nand_get_device(chip, mtd, FL_READING);
- /* Mask to get column */
- col = from & (mtd->oobsize - 1);
+ chip->ops.len = len;
+ chip->ops.datbuf = buf;
+ chip->ops.oobbuf = NULL;
- /* Initialize return length value */
- *retlen = 0;
+ ret = nand_do_read_ops(mtd, from, &chip->ops);
- /* Do not allow reads past end of device */
- if ((from + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n");
- *retlen = 0;
- return -EINVAL;
+ nand_release_device(mtd);
+
+ *retlen = chip->ops.retlen;
+ return ret;
+}
+
+/**
+ * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
+ */
+static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ if (sndcmd) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ sndcmd = 0;
}
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return sndcmd;
+}
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd , FL_READING);
+/**
+ * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * with syndromes
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
+ */
+static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ uint8_t *buf = chip->oob_poi;
+ int length = mtd->oobsize;
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsize = chip->ecc.size;
+ uint8_t *bufpoi = buf;
+ int i, toread, sndrnd = 0, pos;
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
+ for (i = 0; i < chip->ecc.steps; i++) {
+ if (sndrnd) {
+ pos = eccsize + i * (eccsize + chunk);
+ if (mtd->writesize > 512)
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1);
+ else
+ chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page);
+ } else
+ sndrnd = 1;
+ toread = min_t(int, length, chunk);
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += toread;
+ length -= toread;
+ }
+ if (length > 0)
+ chip->read_buf(mtd, bufpoi, length);
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ return 1;
+}
+
+/**
+ * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ int status = 0;
+ const uint8_t *buf = chip->oob_poi;
+ int length = mtd->oobsize;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, buf, length);
+ /* Send command to program the OOB data */
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status;
+}
+
+/**
+ * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash !
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsize = chip->ecc.size, length = mtd->oobsize;
+ int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps;
+ const uint8_t *bufpoi = chip->oob_poi;
- /* Send the read command */
- this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);
/*
- * Read the data, if we read more than one page
- * oob data, let the device transfer the data !
+ * data-ecc-data-ecc ... ecc-oob
+ * or
+ * data-pad-ecc-pad-data-pad .... ecc-pad-oob
*/
- i = 0;
- while (i < len) {
- int thislen = mtd->oobsize - col;
- thislen = min_t(int, thislen, len);
- this->read_buf(mtd, &buf[i], thislen);
- i += thislen;
-
- /* Read more ? */
- if (i < len) {
- page++;
- col = 0;
-
- /* Check, if we cross a chip boundary */
- if (!(page & this->pagemask)) {
- chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
- }
-
- /* Apply delay or wait for ready/busy pin
- * Do this before the AUTOINCR check, so no problems
- * arise if a chip which does auto increment
- * is marked as NOAUTOINCR by the board driver.
- */
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- nand_wait_ready(mtd);
+ if (!chip->ecc.prepad && !chip->ecc.postpad) {
+ pos = steps * (eccsize + chunk);
+ steps = 0;
+ } else
+ pos = eccsize + chunk;
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
- /* For subsequent page reads set offset to 0 */
- this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
+ for (i = 0; i < steps; i++) {
+ if (sndcmd) {
+ if (mtd->writesize <= 512) {
+ uint32_t fill = 0xFFFFFFFF;
+
+ len = eccsize;
+ while (len > 0) {
+ int num = min_t(int, len, 4);
+ chip->write_buf(mtd, (uint8_t *)&fill,
+ num);
+ len -= num;
+ }
+ } else {
+ pos = eccsize + i * (eccsize + chunk);
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1);
}
- }
+ } else
+ sndcmd = 1;
+ len = min_t(int, length, chunk);
+ chip->write_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ length -= len;
}
+ if (length > 0)
+ chip->write_buf(mtd, bufpoi, length);
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
- /* Return happy */
- *retlen = len;
- return 0;
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
}
/**
- * nand_read_raw - [GENERIC] Read raw data including oob into buffer
+ * nand_do_read_oob - [Intern] NAND read out-of-band
* @mtd: MTD device structure
- * @buf: temporary buffer
* @from: offset to read from
- * @len: number of bytes to read
- * @ooblen: number of oob data bytes to read
+ * @ops: oob operations description structure
*
- * Read raw data including oob into buffer
+ * NAND read out-of-band data from the spare area
*/
-int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen)
+static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
- struct nand_chip *this = mtd->priv;
- int page = (int) (from >> this->page_shift);
- int chip = (int) (from >> this->chip_shift);
- int sndcmd = 1;
- int cnt = 0;
- int pagesize = mtd->oobblock + mtd->oobsize;
- int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
+ int page, realpage, chipnr, sndcmd = 1;
+ struct nand_chip *chip = mtd->priv;
+ int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+ int readlen = ops->len;
+ uint8_t *buf = ops->oobbuf;
- /* Do not allow reads past end of device */
- if ((from + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n");
- return -EINVAL;
- }
+ DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
+ (unsigned long long)from, readlen);
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd , FL_READING);
+ chipnr = (int)(from >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
- this->select_chip (mtd, chip);
+ /* Shift to get page */
+ realpage = (int)(from >> chip->page_shift);
+ page = realpage & chip->pagemask;
- /* Add requested oob length */
- len += ooblen;
+ chip->oob_poi = chip->buffers.oobrbuf;
- while (len) {
- if (sndcmd)
- this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);
- sndcmd = 0;
+ while(1) {
+ sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+ buf = nand_transfer_oob(chip, buf, ops);
- this->read_buf (mtd, &buf[cnt], pagesize);
+ readlen -= ops->ooblen;
+ if (!readlen)
+ break;
- len -= pagesize;
- cnt += pagesize;
- page++;
+ if (!(chip->options & NAND_NO_READRDY)) {
+ /*
+ * Apply delay or wait for ready/busy pin. Do this
+ * before the AUTOINCR check, so no problems arise if a
+ * chip which does auto increment is marked as
+ * NOAUTOINCR by the board driver.
+ */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
- if (!this->dev_ready)
- udelay (this->chip_delay);
- else
- nand_wait_ready(mtd);
+ /* Increment page address */
+ realpage++;
- /* Check, if the chip supports auto page increment */
- if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
+
+ /* Check, if the chip supports auto page increment
+ * or if we have hit a block boundary.
+ */
+ if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
+ ops->retlen = ops->len;
return 0;
}
-
/**
- * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer
+ * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
* @mtd: MTD device structure
- * @fsbuf: buffer given by fs driver
- * @oobsel: out of band selection structre
- * @autoplace: 1 = place given buffer into the oob bytes
- * @numpages: number of pages to prepare
- *
- * Return:
- * 1. Filesystem buffer available and autoplacement is off,
- * return filesystem buffer
- * 2. No filesystem buffer or autoplace is off, return internal
- * buffer
- * 3. Filesystem buffer is given and autoplace selected
- * put data from fs buffer into internal buffer and
- * retrun internal buffer
- *
- * Note: The internal buffer is filled with 0xff. This must
- * be done only once, when no autoplacement happens
- * Autoplacement sets the buffer dirty flag, which
- * forces the 0xff fill before using the buffer again.
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
-*/
-static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel,
- int autoplace, int numpages)
+ * NAND read data and/or out-of-band data
+ */
+static int nand_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
- struct nand_chip *this = mtd->priv;
- int i, len, ofs;
-
- /* Zero copy fs supplied buffer */
- if (fsbuf && !autoplace)
- return fsbuf;
-
- /* Check, if the buffer must be filled with ff again */
- if (this->oobdirty) {
- memset (this->oob_buf, 0xff,
- mtd->oobsize << (this->phys_erase_shift - this->page_shift));
- this->oobdirty = 0;
+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf) = NULL;
+ struct nand_chip *chip = mtd->priv;
+ int ret = -ENOTSUPP;
+
+ ops->retlen = 0;
+
+ /* Do not allow reads past end of device */
+ if ((from + ops->len) > mtd->size) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt read beyond end of device\n");
+ return -EINVAL;
}
- /* If we have no autoplacement or no fs buffer use the internal one */
- if (!autoplace || !fsbuf)
- return this->oob_buf;
-
- /* Walk through the pages and place the data */
- this->oobdirty = 1;
- ofs = 0;
- while (numpages--) {
- for (i = 0, len = 0; len < mtd->oobavail; i++) {
- int to = ofs + oobsel->oobfree[i][0];
- int num = oobsel->oobfree[i][1];
- memcpy (&this->oob_buf[to], fsbuf, num);
- len += num;
- fsbuf += num;
- }
- ofs += mtd->oobavail;
+ nand_get_device(chip, mtd, FL_READING);
+
+ switch(ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+
+ case MTD_OOB_RAW:
+ /* Replace the read_page algorithm temporary */
+ read_page = chip->ecc.read_page;
+ chip->ecc.read_page = nand_read_page_raw;
+ break;
+
+ default:
+ goto out;
}
- return this->oob_buf;
+
+ if (!ops->datbuf)
+ ret = nand_do_read_oob(mtd, from, ops);
+ else
+ ret = nand_do_read_ops(mtd, from, ops);
+
+ if (unlikely(ops->mode == MTD_OOB_RAW))
+ chip->ecc.read_page = read_page;
+ out:
+ nand_release_device(mtd);
+ return ret;
}
-#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
/**
- * nand_write - [MTD Interface] compability function for nand_write_ecc
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
- *
- * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL
- *
-*/
-static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
+ * nand_write_page_raw - [Intern] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ */
+static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
{
- return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
}
/**
- * nand_write_ecc - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
- * @eccbuf: filesystem supplied oob data buffer
- * @oobsel: oob selection structure
- *
- * NAND write with ECC
+ * nand_write_page_swecc - {REPLACABLE] software ecc based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
-static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
- size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
+static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
{
- int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr;
- int autoplace = 0, numpages, totalpages;
- struct nand_chip *this = mtd->priv;
- u_char *oobbuf, *bufstart;
- int ppblock = (1 << (this->phys_erase_shift - this->page_shift));
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers.ecccalc;
+ const uint8_t *p = buf;
+ int *eccpos = chip->ecc.layout->eccpos;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ /* Software ecc calculation */
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- /* Initialize retlen, in case of early exit */
- *retlen = 0;
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
- /* Do not allow write past end of device */
- if ((to + len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
- return -EINVAL;
- }
+ nand_write_page_raw(mtd, chip, buf);
+}
- /* reject writes, which are not page aligned */
- if (NOTALIGNED (to) || NOTALIGNED(len)) {
- printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
- return -EINVAL;
+/**
+ * nand_write_page_hwecc - {REPLACABLE] hardware ecc based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ */
+static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers.ecccalc;
+ const uint8_t *p = buf;
+ int *eccpos = chip->ecc.layout->eccpos;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+ chip->write_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
}
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_WRITING);
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
- /* Calculate chipnr */
- chipnr = (int)(to >> this->chip_shift);
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
- /* Check, if it is write protected */
- if (nand_check_wp(mtd))
- goto out;
+/**
+ * nand_write_page_syndrome - {REPLACABLE] hardware ecc syndrom based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ *
+ * The hw generator calculates the error syndrome automatically. Therefor
+ * we need a special oob layout and handling.
+ */
+static void nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ const uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
- /* if oobsel is NULL, use chip defaults */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- /* Autoplace of oob data ? Use the default placement scheme */
- if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
- oobsel = this->autooob;
- autoplace = 1;
- }
- if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
- autoplace = 1;
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+ chip->write_buf(mtd, p, eccsize);
- /* Setup variables and oob buffer */
- totalpages = len >> this->page_shift;
- page = (int) (to >> this->page_shift);
- /* Invalidate the page cache, if we write to the cached page */
- if (page <= this->pagebuf && this->pagebuf < (page + totalpages))
- this->pagebuf = -1;
-
- /* Set it relative to chip */
- page &= this->pagemask;
- startpage = page;
- /* Calc number of pages we can write in one go */
- numpages = min (ppblock - (startpage & (ppblock - 1)), totalpages);
- oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages);
- bufstart = (u_char *)buf;
-
- /* Loop until all data is written */
- while (written < len) {
-
- this->data_poi = (u_char*) &buf[written];
- /* Write one page. If this is the last page to write
- * or the last page in this block, then use the
- * real pageprogram command, else select cached programming
- * if supported by the chip.
- */
- ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0));
- if (ret) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);
- goto out;
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
}
- /* Next oob page */
- oob += mtd->oobsize;
- /* Update written bytes count */
- written += mtd->oobblock;
- if (written == len)
- goto cmp;
- /* Increment page address */
- page++;
-
- /* Have we hit a block boundary ? Then we have to verify and
- * if verify is ok, we have to setup the oob buffer for
- * the next pages.
- */
- if (!(page & (ppblock - 1))){
- int ofs;
- this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage,
- page - startpage,
- oobbuf, oobsel, chipnr, (eccbuf != NULL));
- if (ret) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
- goto out;
- }
- *retlen = written;
-
- ofs = autoplace ? mtd->oobavail : mtd->oobsize;
- if (eccbuf)
- eccbuf += (page - startpage) * ofs;
- totalpages -= page - startpage;
- numpages = min (totalpages, ppblock);
- page &= this->pagemask;
- startpage = page;
- oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel,
- autoplace, numpages);
- oob = 0;
- /* Check, if we cross a chip boundary */
- if (!page) {
- chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
- }
+ chip->ecc.calculate(mtd, p, oob);
+ chip->write_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
}
}
- /* Verify the remaining pages */
-cmp:
- this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage, totalpages,
- oobbuf, oobsel, chipnr, (eccbuf != NULL));
- if (!ret)
- *retlen = written;
- else
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
-out:
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
-
- return ret;
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->write_buf(mtd, oob, i);
}
-
/**
- * nand_write_oob - [MTD Interface] NAND write out-of-band
+ * nand_write_page - [INTERNAL] write one page
* @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
+ * @chip: NAND chip descriptor
* @buf: the data to write
- *
- * NAND write out-of-band
+ * @page: page number to write
+ * @cached: cached programming
*/
-static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
+static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached)
{
- int column, page, status, ret = -EIO, chipnr;
- struct nand_chip *this = mtd->priv;
+ int status;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
- /* Shift to get page */
- page = (int) (to >> this->page_shift);
- chipnr = (int) (to >> this->chip_shift);
+ chip->ecc.write_page(mtd, chip, buf);
- /* Mask to get column */
- column = to & (mtd->oobsize - 1);
+ /*
+ * Cached progamming disabled for now, Not sure if its worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ */
+ cached = 0;
- /* Initialize return length value */
- *retlen = 0;
+ if (!cached || !(chip->options & NAND_CACHEPRG)) {
- /* Do not allow write past end of page */
- if ((column + len) > mtd->oobsize) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
- return -EINVAL;
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_WRITING, status,
+ page);
+
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
}
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_WRITING);
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+ /* Send command to read back the data */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ if (chip->verify_buf(mtd, buf, mtd->writesize))
+ return -EIO;
+#endif
+ return 0;
+}
+
+/**
+ * nand_fill_oob - [Internal] Transfer client buffer to oob
+ * @chip: nand chip structure
+ * @oob: oob data buffer
+ * @ops: oob ops structure
+ */
+static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob,
+ struct mtd_oob_ops *ops)
+{
+ size_t len = ops->ooblen;
+
+ switch(ops->mode) {
+
+ case MTD_OOB_PLACE:
+ case MTD_OOB_RAW:
+ memcpy(chip->oob_poi + ops->ooboffs, oob, len);
+ return oob + len;
+
+ case MTD_OOB_AUTO: {
+ struct nand_oobfree *free = chip->ecc.layout->oobfree;
+ uint32_t boffs = 0, woffs = ops->ooboffs;
+ size_t bytes = 0;
+
+ for(; free->length && len; free++, len -= bytes) {
+ /* Write request not from offset 0 ? */
+ if (unlikely(woffs)) {
+ if (woffs >= free->length) {
+ woffs -= free->length;
+ continue;
+ }
+ boffs = free->offset + woffs;
+ bytes = min_t(size_t, len,
+ (free->length - woffs));
+ woffs = 0;
+ } else {
+ bytes = min_t(size_t, len, free->length);
+ boffs = free->offset;
+ }
+ memcpy(chip->oob_poi + woffs, oob, bytes);
+ oob += bytes;
+ }
+ return oob;
+ }
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+#define NOTALIGNED(x) (x & (mtd->writesize-1)) != 0
+
+/**
+ * nand_do_write_ops - [Internal] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
+ *
+ * NAND write with ECC
+ */
+static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int chipnr, realpage, page, blockmask;
+ struct nand_chip *chip = mtd->priv;
+ uint32_t writelen = ops->len;
+ uint8_t *oob = ops->oobbuf;
+ uint8_t *buf = ops->datbuf;
+ int bytes = mtd->writesize;
+ int ret;
- /* Reset the chip. Some chips (like the Toshiba TC5832DC found
- in one of my DiskOnChip 2000 test units) will clear the whole
- data page too if we don't do this. I have no clue why, but
- I seem to have 'fixed' it in the doc2000 driver in
- August 1999. dwmw2. */
- this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+ ops->retlen = 0;
+
+ /* reject writes, which are not page aligned */
+ if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
+ printk(KERN_NOTICE "nand_write: "
+ "Attempt to write not page aligned data\n");
+ return -EINVAL;
+ }
+
+ if (!writelen)
+ return 0;
/* Check, if it is write protected */
if (nand_check_wp(mtd))
- goto out;
+ return -EIO;
- /* Invalidate the page cache, if we write to the cached page */
- if (page == this->pagebuf)
- this->pagebuf = -1;
-
- if (NAND_MUST_PAD(this)) {
- /* Write out desired data */
- this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
- /* prepad 0xff for partial programming */
- this->write_buf(mtd, ffchars, column);
- /* write data */
- this->write_buf(mtd, buf, len);
- /* postpad 0xff for partial programming */
- this->write_buf(mtd, ffchars, mtd->oobsize - (len+column));
- } else {
- /* Write out desired data */
- this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask);
- /* write data */
- this->write_buf(mtd, buf, len);
- }
- /* Send command to program the OOB data */
- this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1);
+ chipnr = (int)(to >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
- status = this->waitfunc (mtd, this, FL_WRITING);
+ realpage = (int)(to >> chip->page_shift);
+ page = realpage & chip->pagemask;
+ blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
- /* See if device thinks it succeeded */
- if (status & NAND_STATUS_FAIL) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
- ret = -EIO;
- goto out;
- }
- /* Return happy */
- *retlen = len;
+ /* Invalidate the page cache, when we write to the cached page */
+ if (to <= (chip->pagebuf << chip->page_shift) &&
+ (chip->pagebuf << chip->page_shift) < (to + ops->len))
+ chip->pagebuf = -1;
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
- /* Send command to read back the data */
- this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask);
+ chip->oob_poi = chip->buffers.oobwbuf;
- if (this->verify_buf(mtd, buf, len)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page);
- ret = -EIO;
- goto out;
+ while(1) {
+ int cached = writelen > bytes && page != blockmask;
+
+ if (unlikely(oob))
+ oob = nand_fill_oob(chip, oob, ops);
+
+ ret = nand_write_page(mtd, chip, buf, page, cached);
+ if (ret)
+ break;
+
+ writelen -= bytes;
+ if (!writelen)
+ break;
+
+ buf += bytes;
+ realpage++;
+
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
}
-#endif
- ret = 0;
-out:
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
+ if (unlikely(oob))
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
+ ops->retlen = ops->len - writelen;
return ret;
}
-
/**
- * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc
+ * nand_write - [MTD Interface] NAND write with ECC
* @mtd: MTD device structure
- * @vecs: the iovectors to write
- * @count: number of vectors
* @to: offset to write to
+ * @len: number of bytes to write
* @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
- * NAND write with kvec. This just calls the ecc function
+ * NAND write with ECC
*/
-static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
- loff_t to, size_t * retlen)
+static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const uint8_t *buf)
{
- return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ /* Do not allow reads past end of device */
+ if ((to + len) > mtd->size)
+ return -EINVAL;
+ if (!len)
+ return 0;
+
+ nand_get_device(chip, mtd, FL_WRITING);
+
+ chip->ops.len = len;
+ chip->ops.datbuf = (uint8_t *)buf;
+ chip->ops.oobbuf = NULL;
+
+ ret = nand_do_write_ops(mtd, to, &chip->ops);
+
+ nand_release_device(mtd);
+
+ *retlen = chip->ops.retlen;
+ return ret;
}
/**
- * nand_writev_ecc - [MTD Interface] write with iovec with ecc
+ * nand_do_write_oob - [MTD Interface] NAND write out-of-band
* @mtd: MTD device structure
- * @vecs: the iovectors to write
- * @count: number of vectors
* @to: offset to write to
- * @retlen: pointer to variable to store the number of written bytes
- * @eccbuf: filesystem supplied oob data buffer
- * @oobsel: oob selection structure
+ * @ops: oob operation description structure
*
- * NAND write with iovec with ecc
+ * NAND write out-of-band
*/
-static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
- loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
- int i, page, len, total_len, ret = -EIO, written = 0, chipnr;
- int oob, numpages, autoplace = 0, startpage;
- struct nand_chip *this = mtd->priv;
- int ppblock = (1 << (this->phys_erase_shift - this->page_shift));
- u_char *oobbuf, *bufstart;
-
- /* Preset written len for early exit */
- *retlen = 0;
-
- /* Calculate total length of data */
- total_len = 0;
- for (i = 0; i < count; i++)
- total_len += (int) vecs[i].iov_len;
+ int chipnr, page, status;
+ struct nand_chip *chip = mtd->priv;
- DEBUG (MTD_DEBUG_LEVEL3,
- "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
+ DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
+ (unsigned int)to, (int)ops->len);
/* Do not allow write past end of page */
- if ((to + total_len) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
+ if ((ops->ooboffs + ops->len) > mtd->oobsize) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "Attempt to write past end of page\n");
return -EINVAL;
}
- /* reject writes, which are not page aligned */
- if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
- printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
- return -EINVAL;
- }
+ chipnr = (int)(to >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
- /* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_WRITING);
+ /* Shift to get page */
+ page = (int)(to >> chip->page_shift);
- /* Get the current chip-nr */
- chipnr = (int) (to >> this->chip_shift);
- /* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ /*
+ * Reset the chip. Some chips (like the Toshiba TC5832DC found in one
+ * of my DiskOnChip 2000 test units) will clear the whole data page too
+ * if we don't do this. I have no clue why, but I seem to have 'fixed'
+ * it in the doc2000 driver in August 1999. dwmw2.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
/* Check, if it is write protected */
if (nand_check_wp(mtd))
- goto out;
+ return -EROFS;
- /* if oobsel is NULL, use chip defaults */
- if (oobsel == NULL)
- oobsel = &mtd->oobinfo;
+ /* Invalidate the page cache, if we write to the cached page */
+ if (page == chip->pagebuf)
+ chip->pagebuf = -1;
- /* Autoplace of oob data ? Use the default placement scheme */
- if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
- oobsel = this->autooob;
- autoplace = 1;
- }
- if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
- autoplace = 1;
+ chip->oob_poi = chip->buffers.oobwbuf;
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+ nand_fill_oob(chip, ops->oobbuf, ops);
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
- /* Setup start page */
- page = (int) (to >> this->page_shift);
- /* Invalidate the page cache, if we write to the cached page */
- if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))
- this->pagebuf = -1;
+ if (status)
+ return status;
- startpage = page & this->pagemask;
+ ops->retlen = ops->len;
- /* Loop until all kvec' data has been written */
- len = 0;
- while (count) {
- /* If the given tuple is >= pagesize then
- * write it out from the iov
- */
- if ((vecs->iov_len - len) >= mtd->oobblock) {
- /* Calc number of pages we can write
- * out of this iov in one go */
- numpages = (vecs->iov_len - len) >> this->page_shift;
- /* Do not cross block boundaries */
- numpages = min (ppblock - (startpage & (ppblock - 1)), numpages);
- oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
- bufstart = (u_char *)vecs->iov_base;
- bufstart += len;
- this->data_poi = bufstart;
- oob = 0;
- for (i = 1; i <= numpages; i++) {
- /* Write one page. If this is the last page to write
- * then use the real pageprogram command, else select
- * cached programming if supported by the chip.
- */
- ret = nand_write_page (mtd, this, page & this->pagemask,
- &oobbuf[oob], oobsel, i != numpages);
- if (ret)
- goto out;
- this->data_poi += mtd->oobblock;
- len += mtd->oobblock;
- oob += mtd->oobsize;
- page++;
- }
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- } else {
- /* We must use the internal buffer, read data out of each
- * tuple until we have a full page to write
- */
- int cnt = 0;
- while (cnt < mtd->oobblock) {
- if (vecs->iov_base != NULL && vecs->iov_len)
- this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- }
- this->pagebuf = page;
- this->data_poi = this->data_buf;
- bufstart = this->data_poi;
- numpages = 1;
- oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
- ret = nand_write_page (mtd, this, page & this->pagemask,
- oobbuf, oobsel, 0);
- if (ret)
- goto out;
- page++;
- }
+ return 0;
+}
- this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0);
- if (ret)
- goto out;
+/**
+ * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
+ */
+static int nand_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf) = NULL;
+ struct nand_chip *chip = mtd->priv;
+ int ret = -ENOTSUPP;
- written += mtd->oobblock * numpages;
- /* All done ? */
- if (!count)
- break;
+ ops->retlen = 0;
- startpage = page & this->pagemask;
- /* Check, if we cross a chip boundary */
- if (!startpage) {
- chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
- }
+ /* Do not allow writes past end of device */
+ if ((to + ops->len) > mtd->size) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt read beyond end of device\n");
+ return -EINVAL;
}
- ret = 0;
-out:
- /* Deselect and wake up anyone waiting on the device */
- nand_release_device(mtd);
- *retlen = written;
+ nand_get_device(chip, mtd, FL_WRITING);
+
+ switch(ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+
+ case MTD_OOB_RAW:
+ /* Replace the write_page algorithm temporary */
+ write_page = chip->ecc.write_page;
+ chip->ecc.write_page = nand_write_page_raw;
+ break;
+
+ default:
+ goto out;
+ }
+
+ if (!ops->datbuf)
+ ret = nand_do_write_oob(mtd, to, ops);
+ else
+ ret = nand_do_write_ops(mtd, to, ops);
+
+ if (unlikely(ops->mode == MTD_OOB_RAW))
+ chip->ecc.write_page = write_page;
+ out:
+ nand_release_device(mtd);
return ret;
}
@@ -2050,12 +1816,12 @@ out:
*
* Standard erase command for NAND chips
*/
-static void single_erase_cmd (struct mtd_info *mtd, int page)
+static void single_erase_cmd(struct mtd_info *mtd, int page)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* Send commands to erase a block */
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
- this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
}
/**
@@ -2066,15 +1832,15 @@ static void single_erase_cmd (struct mtd_info *mtd, int page)
* AND multi block erase command function
* Erase 4 consecutive blocks
*/
-static void multi_erase_cmd (struct mtd_info *mtd, int page)
+static void multi_erase_cmd(struct mtd_info *mtd, int page)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
/* Send commands to erase a block */
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
- this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
- this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
}
/**
@@ -2084,79 +1850,82 @@ static void multi_erase_cmd (struct mtd_info *mtd, int page)
*
* Erase one ore more blocks
*/
-static int nand_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
- return nand_erase_nand (mtd, instr, 0);
+ return nand_erase_nand(mtd, instr, 0);
}
#define BBT_PAGE_MASK 0xffffff3f
/**
- * nand_erase_intern - [NAND Interface] erase block(s)
+ * nand_erase_nand - [Internal] erase block(s)
* @mtd: MTD device structure
* @instr: erase instruction
* @allowbbt: allow erasing the bbt area
*
* Erase one ore more blocks
*/
-int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
+int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+ int allowbbt)
{
int page, len, status, pages_per_block, ret, chipnr;
- struct nand_chip *this = mtd->priv;
- int rewrite_bbt[NAND_MAX_CHIPS]={0}; /* flags to indicate the page, if bbt needs to be rewritten. */
- unsigned int bbt_masked_page; /* bbt mask to compare to page being erased. */
- /* It is used to see if the current page is in the same */
- /* 256 block group and the same bank as the bbt. */
+ struct nand_chip *chip = mtd->priv;
+ int rewrite_bbt[NAND_MAX_CHIPS]={0};
+ unsigned int bbt_masked_page = 0xffffffff;
- DEBUG (MTD_DEBUG_LEVEL3,
- "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
+ DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n",
+ (unsigned int)instr->addr, (unsigned int)instr->len);
/* Start address must align on block boundary */
- if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+ if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
return -EINVAL;
}
/* Length must align on block boundary */
- if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
+ if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
+ "Length not block aligned\n");
return -EINVAL;
}
/* Do not allow erase past end of device */
if ((instr->len + instr->addr) > mtd->size) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
+ "Erase past end of device\n");
return -EINVAL;
}
instr->fail_addr = 0xffffffff;
/* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_ERASING);
+ nand_get_device(chip, mtd, FL_ERASING);
/* Shift to get first page */
- page = (int) (instr->addr >> this->page_shift);
- chipnr = (int) (instr->addr >> this->chip_shift);
+ page = (int)(instr->addr >> chip->page_shift);
+ chipnr = (int)(instr->addr >> chip->chip_shift);
/* Calculate pages in each block */
- pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
+ pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
/* Select the NAND device */
- this->select_chip(mtd, chipnr);
+ chip->select_chip(mtd, chipnr);
- /* Check the WP bit */
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
+ "Device is write protected!!!\n");
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
- /* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */
- if (this->options & BBT_AUTO_REFRESH) {
- bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
- } else {
- bbt_masked_page = 0xffffffff; /* should not match anything */
- }
+ /*
+ * If BBT requires refresh, set the BBT page mask to see if the BBT
+ * should be rewritten. Otherwise the mask is set to 0xffffffff which
+ * can not be matched. This is also done when the bbt is actually
+ * erased to avoid recusrsive updates
+ */
+ if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
+ bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
/* Loop through the pages */
len = instr->len;
@@ -2164,64 +1933,77 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
instr->state = MTD_ERASING;
while (len) {
- /* Check if we have a bad block, we do not erase bad blocks ! */
- if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) {
- printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
+ /*
+ * heck if we have a bad block, we do not erase bad blocks !
+ */
+ if (nand_block_checkbad(mtd, ((loff_t) page) <<
+ chip->page_shift, 0, allowbbt)) {
+ printk(KERN_WARNING "nand_erase: attempt to erase a "
+ "bad block at page 0x%08x\n", page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
- /* Invalidate the page cache, if we erase the block which contains
- the current cached page */
- if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
- this->pagebuf = -1;
+ /*
+ * Invalidate the page cache, if we erase the block which
+ * contains the current cached page
+ */
+ if (page <= chip->pagebuf && chip->pagebuf <
+ (page + pages_per_block))
+ chip->pagebuf = -1;
- this->erase_cmd (mtd, page & this->pagemask);
+ chip->erase_cmd(mtd, page & chip->pagemask);
- status = this->waitfunc (mtd, this, FL_ERASING);
+ status = chip->waitfunc(mtd, chip);
- /* See if operation failed and additional status checks are available */
- if ((status & NAND_STATUS_FAIL) && (this->errstat)) {
- status = this->errstat(mtd, this, FL_ERASING, status, page);
- }
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_ERASING,
+ status, page);
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
+ "Failed erase, page 0x%08x\n", page);
instr->state = MTD_ERASE_FAILED;
- instr->fail_addr = (page << this->page_shift);
+ instr->fail_addr = (page << chip->page_shift);
goto erase_exit;
}
- /* if BBT requires refresh, set the BBT rewrite flag to the page being erased */
- if (this->options & BBT_AUTO_REFRESH) {
- if (((page & BBT_PAGE_MASK) == bbt_masked_page) &&
- (page != this->bbt_td->pages[chipnr])) {
- rewrite_bbt[chipnr] = (page << this->page_shift);
- }
- }
+ /*
+ * If BBT requires refresh, set the BBT rewrite flag to the
+ * page being erased
+ */
+ if (bbt_masked_page != 0xffffffff &&
+ (page & BBT_PAGE_MASK) == bbt_masked_page)
+ rewrite_bbt[chipnr] = (page << chip->page_shift);
/* Increment page address and decrement length */
- len -= (1 << this->phys_erase_shift);
+ len -= (1 << chip->phys_erase_shift);
page += pages_per_block;
/* Check, if we cross a chip boundary */
- if (len && !(page & this->pagemask)) {
+ if (len && !(page & chip->pagemask)) {
chipnr++;
- this->select_chip(mtd, -1);
- this->select_chip(mtd, chipnr);
-
- /* if BBT requires refresh and BBT-PERCHIP,
- * set the BBT page mask to see if this BBT should be rewritten */
- if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) {
- bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
- }
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ /*
+ * If BBT requires refresh and BBT-PERCHIP, set the BBT
+ * page mask to see if this BBT should be rewritten
+ */
+ if (bbt_masked_page != 0xffffffff &&
+ (chip->bbt_td->options & NAND_BBT_PERCHIP))
+ bbt_masked_page = chip->bbt_td->pages[chipnr] &
+ BBT_PAGE_MASK;
}
}
instr->state = MTD_ERASE_DONE;
-erase_exit:
+ erase_exit:
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
/* Do call back function */
@@ -2231,16 +2013,21 @@ erase_exit:
/* Deselect and wake up anyone waiting on the device */
nand_release_device(mtd);
- /* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */
- if ((this->options & BBT_AUTO_REFRESH) && (!ret)) {
- for (chipnr = 0; chipnr < this->numchips; chipnr++) {
- if (rewrite_bbt[chipnr]) {
- /* update the BBT for chip */
- DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n",
- chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]);
- nand_update_bbt (mtd, rewrite_bbt[chipnr]);
- }
- }
+ /*
+ * If BBT requires refresh and erase was successful, rewrite any
+ * selected bad block tables
+ */
+ if (bbt_masked_page == 0xffffffff || ret)
+ return ret;
+
+ for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
+ if (!rewrite_bbt[chipnr])
+ continue;
+ /* update the BBT for chip */
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt "
+ "(%d:0x%0x 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
+ chip->bbt_td->pages[chipnr]);
+ nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
/* Return more or less happy */
@@ -2253,51 +2040,50 @@ erase_exit:
*
* Sync is actually a wait for chip ready function
*/
-static void nand_sync (struct mtd_info *mtd)
+static void nand_sync(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+ DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n");
/* Grab the lock and see if the device is available */
- nand_get_device (this, mtd, FL_SYNCING);
+ nand_get_device(chip, mtd, FL_SYNCING);
/* Release it and go back */
- nand_release_device (mtd);
+ nand_release_device(mtd);
}
-
/**
- * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * nand_block_isbad - [MTD Interface] Check if block at offset is bad
* @mtd: MTD device structure
* @ofs: offset relative to mtd start
*/
-static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
+static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
/* Check for invalid offset */
- if (ofs > mtd->size)
+ if (offs > mtd->size)
return -EINVAL;
- return nand_block_checkbad (mtd, ofs, 1, 0);
+ return nand_block_checkbad(mtd, offs, 1, 0);
}
/**
- * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
* @mtd: MTD device structure
* @ofs: offset relative to mtd start
*/
-static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
+static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
int ret;
- if ((ret = nand_block_isbad(mtd, ofs))) {
- /* If it was bad already, return success and do nothing. */
+ if ((ret = nand_block_isbad(mtd, ofs))) {
+ /* If it was bad already, return success and do nothing. */
if (ret > 0)
return 0;
- return ret;
- }
+ return ret;
+ }
- return this->block_markbad(mtd, ofs);
+ return chip->block_markbad(mtd, ofs);
}
/**
@@ -2306,9 +2092,9 @@ static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
*/
static int nand_suspend(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- return nand_get_device (this, mtd, FL_PM_SUSPENDED);
+ return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
}
/**
@@ -2317,373 +2103,385 @@ static int nand_suspend(struct mtd_info *mtd)
*/
static void nand_resume(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
- if (this->state == FL_PM_SUSPENDED)
+ if (chip->state == FL_PM_SUSPENDED)
nand_release_device(mtd);
else
- printk(KERN_ERR "resume() called for the chip which is not "
- "in suspended state\n");
-
+ printk(KERN_ERR "nand_resume() called for a chip which is not "
+ "in suspended state\n");
}
-
-/**
- * nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- *
- * This fills out all the not initialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values. Buffers are allocated if
- * they are not provided by the board driver
- *
+/*
+ * Set default functions
*/
-int nand_scan (struct mtd_info *mtd, int maxchips)
+static void nand_set_defaults(struct nand_chip *chip, int busw)
{
- int i, nand_maf_id, nand_dev_id, busw, maf_id;
- struct nand_chip *this = mtd->priv;
-
- /* Get buswidth to select the correct functions*/
- busw = this->options & NAND_BUSWIDTH_16;
-
/* check for proper chip_delay setup, set 20us if not */
- if (!this->chip_delay)
- this->chip_delay = 20;
+ if (!chip->chip_delay)
+ chip->chip_delay = 20;
/* check, if a user supplied command function given */
- if (this->cmdfunc == NULL)
- this->cmdfunc = nand_command;
+ if (chip->cmdfunc == NULL)
+ chip->cmdfunc = nand_command;
/* check, if a user supplied wait function given */
- if (this->waitfunc == NULL)
- this->waitfunc = nand_wait;
-
- if (!this->select_chip)
- this->select_chip = nand_select_chip;
- if (!this->write_byte)
- this->write_byte = busw ? nand_write_byte16 : nand_write_byte;
- if (!this->read_byte)
- this->read_byte = busw ? nand_read_byte16 : nand_read_byte;
- if (!this->write_word)
- this->write_word = nand_write_word;
- if (!this->read_word)
- this->read_word = nand_read_word;
- if (!this->block_bad)
- this->block_bad = nand_block_bad;
- if (!this->block_markbad)
- this->block_markbad = nand_default_block_markbad;
- if (!this->write_buf)
- this->write_buf = busw ? nand_write_buf16 : nand_write_buf;
- if (!this->read_buf)
- this->read_buf = busw ? nand_read_buf16 : nand_read_buf;
- if (!this->verify_buf)
- this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
- if (!this->scan_bbt)
- this->scan_bbt = nand_default_bbt;
+ if (chip->waitfunc == NULL)
+ chip->waitfunc = nand_wait;
+
+ if (!chip->select_chip)
+ chip->select_chip = nand_select_chip;
+ if (!chip->read_byte)
+ chip->read_byte = busw ? nand_read_byte16 : nand_read_byte;
+ if (!chip->read_word)
+ chip->read_word = nand_read_word;
+ if (!chip->block_bad)
+ chip->block_bad = nand_block_bad;
+ if (!chip->block_markbad)
+ chip->block_markbad = nand_default_block_markbad;
+ if (!chip->write_buf)
+ chip->write_buf = busw ? nand_write_buf16 : nand_write_buf;
+ if (!chip->read_buf)
+ chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+ if (!chip->verify_buf)
+ chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
+ if (!chip->scan_bbt)
+ chip->scan_bbt = nand_default_bbt;
+
+ if (!chip->controller) {
+ chip->controller = &chip->hwcontrol;
+ spin_lock_init(&chip->controller->lock);
+ init_waitqueue_head(&chip->controller->wq);
+ }
+
+}
+
+/*
+ * Get the flash and manufacturer id and lookup if the type is supported
+ */
+static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int busw, int *maf_id)
+{
+ struct nand_flash_dev *type = NULL;
+ int i, dev_id, maf_idx;
/* Select the device */
- this->select_chip(mtd, 0);
+ chip->select_chip(mtd, 0);
/* Send the command for reading device ID */
- this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
/* Read manufacturer and device IDs */
- nand_maf_id = this->read_byte(mtd);
- nand_dev_id = this->read_byte(mtd);
+ *maf_id = chip->read_byte(mtd);
+ dev_id = chip->read_byte(mtd);
- /* Print and store flash device information */
+ /* Lookup the flash id */
for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+ if (dev_id == nand_flash_ids[i].id) {
+ type = &nand_flash_ids[i];
+ break;
+ }
+ }
- if (nand_dev_id != nand_flash_ids[i].id)
- continue;
+ if (!type)
+ return ERR_PTR(-ENODEV);
+
+ if (!mtd->name)
+ mtd->name = type->name;
+
+ chip->chipsize = type->chipsize << 20;
+
+ /* Newer devices have all the information in additional id bytes */
+ if (!type->pagesize) {
+ int extid;
+ /* The 3rd id byte contains non relevant data ATM */
+ extid = chip->read_byte(mtd);
+ /* The 4th id byte is the important one */
+ extid = chip->read_byte(mtd);
+ /* Calc pagesize */
+ mtd->writesize = 1024 << (extid & 0x3);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
+ extid >>= 2;
+ /* Calc blocksize. Blocksize is multiples of 64KiB */
+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
+ extid >>= 2;
+ /* Get buswidth information */
+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
- if (!mtd->name) mtd->name = nand_flash_ids[i].name;
- this->chipsize = nand_flash_ids[i].chipsize << 20;
-
- /* New devices have all the information in additional id bytes */
- if (!nand_flash_ids[i].pagesize) {
- int extid;
- /* The 3rd id byte contains non relevant data ATM */
- extid = this->read_byte(mtd);
- /* The 4th id byte is the important one */
- extid = this->read_byte(mtd);
- /* Calc pagesize */
- mtd->oobblock = 1024 << (extid & 0x3);
- extid >>= 2;
- /* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock >> 9);
- extid >>= 2;
- /* Calc blocksize. Blocksize is multiples of 64KiB */
- mtd->erasesize = (64 * 1024) << (extid & 0x03);
- extid >>= 2;
- /* Get buswidth information */
- busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+ } else {
+ /*
+ * Old devices have chip data hardcoded in the device id table
+ */
+ mtd->erasesize = type->erasesize;
+ mtd->writesize = type->pagesize;
+ mtd->oobsize = mtd->writesize / 32;
+ busw = type->options & NAND_BUSWIDTH_16;
+ }
- } else {
- /* Old devices have this data hardcoded in the
- * device id table */
- mtd->erasesize = nand_flash_ids[i].erasesize;
- mtd->oobblock = nand_flash_ids[i].pagesize;
- mtd->oobsize = mtd->oobblock / 32;
- busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
- }
+ /* Try to identify manufacturer */
+ for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_id++) {
+ if (nand_manuf_ids[maf_idx].id == *maf_id)
+ break;
+ }
- /* Try to identify manufacturer */
- for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) {
- if (nand_manuf_ids[maf_id].id == nand_maf_id)
- break;
- }
+ /*
+ * Check, if buswidth is correct. Hardware drivers should set
+ * chip correct !
+ */
+ if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+ printk(KERN_INFO "NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+ dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
+ return ERR_PTR(-EINVAL);
+ }
- /* Check, if buswidth is correct. Hardware drivers should set
- * this correct ! */
- if (busw != (this->options & NAND_BUSWIDTH_16)) {
- printk (KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
- nand_manuf_ids[maf_id].name , mtd->name);
- printk (KERN_WARNING
- "NAND bus width %d instead %d bit\n",
- (this->options & NAND_BUSWIDTH_16) ? 16 : 8,
- busw ? 16 : 8);
- this->select_chip(mtd, -1);
- return 1;
- }
+ /* Calculate the address shift from the page size */
+ chip->page_shift = ffs(mtd->writesize) - 1;
+ /* Convert chipsize to number of pages per chip -1. */
+ chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
- /* Calculate the address shift from the page size */
- this->page_shift = ffs(mtd->oobblock) - 1;
- this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
- this->chip_shift = ffs(this->chipsize) - 1;
-
- /* Set the bad block position */
- this->badblockpos = mtd->oobblock > 512 ?
- NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-
- /* Get chip options, preserve non chip based options */
- this->options &= ~NAND_CHIPOPTIONS_MSK;
- this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
- /* Set this as a default. Board drivers can override it, if neccecary */
- this->options |= NAND_NO_AUTOINCR;
- /* Check if this is a not a samsung device. Do not clear the options
- * for chips which are not having an extended id.
- */
- if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
- this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ chip->bbt_erase_shift = chip->phys_erase_shift =
+ ffs(mtd->erasesize) - 1;
+ chip->chip_shift = ffs(chip->chipsize) - 1;
- /* Check for AND chips with 4 page planes */
- if (this->options & NAND_4PAGE_ARRAY)
- this->erase_cmd = multi_erase_cmd;
- else
- this->erase_cmd = single_erase_cmd;
+ /* Set the bad block position */
+ chip->badblockpos = mtd->writesize > 512 ?
+ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
- /* Do not replace user supplied command function ! */
- if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
- this->cmdfunc = nand_command_lp;
+ /* Get chip options, preserve non chip based options */
+ chip->options &= ~NAND_CHIPOPTIONS_MSK;
+ chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
- printk (KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
- nand_manuf_ids[maf_id].name , nand_flash_ids[i].name);
- break;
- }
+ /*
+ * Set chip as a default. Board drivers can override it, if necessary
+ */
+ chip->options |= NAND_NO_AUTOINCR;
+
+ /* Check if chip is a not a samsung device. Do not clear the
+ * options for chips which are not having an extended id.
+ */
+ if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+ chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+
+ /* Check for AND chips with 4 page planes */
+ if (chip->options & NAND_4PAGE_ARRAY)
+ chip->erase_cmd = multi_erase_cmd;
+ else
+ chip->erase_cmd = single_erase_cmd;
+
+ /* Do not replace user supplied command function ! */
+ if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+ chip->cmdfunc = nand_command_lp;
+
+ printk(KERN_INFO "NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id,
+ nand_manuf_ids[maf_idx].name, type->name);
+
+ return type;
+}
+
+/* module_text_address() isn't exported, and it's mostly a pointless
+ test if this is a module _anyway_ -- they'd have to try _really_ hard
+ to call us from in-kernel code if the core NAND support is modular. */
+#ifdef MODULE
+#define caller_is_module() (1)
+#else
+#define caller_is_module() \
+ module_text_address((unsigned long)__builtin_return_address(0))
+#endif
- if (!nand_flash_ids[i].name) {
- printk (KERN_WARNING "No NAND device found!!!\n");
- this->select_chip(mtd, -1);
- return 1;
+/**
+ * nand_scan - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: Number of chips to scan for
+ *
+ * This fills out all the uninitialized function pointers
+ * with the defaults.
+ * The flash ID is read and the mtd/chip structures are
+ * filled with the appropriate values.
+ * The mtd->owner field must be set to the module of the caller
+ *
+ */
+int nand_scan(struct mtd_info *mtd, int maxchips)
+{
+ int i, busw, nand_maf_id;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_flash_dev *type;
+
+ /* Many callers got this wrong, so check for it for a while... */
+ if (!mtd->owner && caller_is_module()) {
+ printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+ BUG();
}
- for (i=1; i < maxchips; i++) {
- this->select_chip(mtd, i);
+ /* Get buswidth to select the correct functions */
+ busw = chip->options & NAND_BUSWIDTH_16;
+ /* Set the default functions */
+ nand_set_defaults(chip, busw);
- /* Send the command for reading device ID */
- this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
+ /* Read the flash type */
+ type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id);
+
+ if (IS_ERR(type)) {
+ printk(KERN_WARNING "No NAND device found!!!\n");
+ chip->select_chip(mtd, -1);
+ return PTR_ERR(type);
+ }
+ /* Check for a chip array */
+ for (i = 1; i < maxchips; i++) {
+ chip->select_chip(mtd, i);
+ /* Send the command for reading device ID */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
/* Read manufacturer and device IDs */
- if (nand_maf_id != this->read_byte(mtd) ||
- nand_dev_id != this->read_byte(mtd))
+ if (nand_maf_id != chip->read_byte(mtd) ||
+ type->id != chip->read_byte(mtd))
break;
}
if (i > 1)
printk(KERN_INFO "%d NAND chips detected\n", i);
- /* Allocate buffers, if neccecary */
- if (!this->oob_buf) {
- size_t len;
- len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
- this->oob_buf = kmalloc (len, GFP_KERNEL);
- if (!this->oob_buf) {
- printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
- return -ENOMEM;
- }
- this->options |= NAND_OOBBUF_ALLOC;
- }
+ /* Store the number of chips and calc total size for mtd */
+ chip->numchips = i;
+ mtd->size = i * chip->chipsize;
- if (!this->data_buf) {
- size_t len;
- len = mtd->oobblock + mtd->oobsize;
- this->data_buf = kmalloc (len, GFP_KERNEL);
- if (!this->data_buf) {
- if (this->options & NAND_OOBBUF_ALLOC)
- kfree (this->oob_buf);
- printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
- return -ENOMEM;
- }
- this->options |= NAND_DATABUF_ALLOC;
- }
+ /* Preset the internal oob write buffer */
+ memset(chip->buffers.oobwbuf, 0xff, mtd->oobsize);
- /* Store the number of chips and calc total size for mtd */
- this->numchips = i;
- mtd->size = i * this->chipsize;
- /* Convert chipsize to number of pages per chip -1. */
- this->pagemask = (this->chipsize >> this->page_shift) - 1;
- /* Preset the internal oob buffer */
- memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-
- /* If no default placement scheme is given, select an
- * appropriate one */
- if (!this->autooob) {
- /* Select the appropriate default oob placement scheme for
- * placement agnostic filesystems */
+ /*
+ * If no default placement scheme is given, select an appropriate one
+ */
+ if (!chip->ecc.layout) {
switch (mtd->oobsize) {
case 8:
- this->autooob = &nand_oob_8;
+ chip->ecc.layout = &nand_oob_8;
break;
case 16:
- this->autooob = &nand_oob_16;
+ chip->ecc.layout = &nand_oob_16;
break;
case 64:
- this->autooob = &nand_oob_64;
+ chip->ecc.layout = &nand_oob_64;
break;
default:
- printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
- mtd->oobsize);
+ printk(KERN_WARNING "No oob scheme defined for "
+ "oobsize %d\n", mtd->oobsize);
BUG();
}
}
- /* The number of bytes available for the filesystem to place fs dependend
- * oob data */
- mtd->oobavail = 0;
- for (i = 0; this->autooob->oobfree[i][1]; i++)
- mtd->oobavail += this->autooob->oobfree[i][1];
-
/*
- * check ECC mode, default to software
- * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
- * fallback to software ECC
- */
- this->eccsize = 256; /* set default eccsize */
- this->eccbytes = 3;
-
- switch (this->eccmode) {
- case NAND_ECC_HW12_2048:
- if (mtd->oobblock < 2048) {
- printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
- mtd->oobblock);
- this->eccmode = NAND_ECC_SOFT;
- this->calculate_ecc = nand_calculate_ecc;
- this->correct_data = nand_correct_data;
- } else
- this->eccsize = 2048;
- break;
-
- case NAND_ECC_HW3_512:
- case NAND_ECC_HW6_512:
- case NAND_ECC_HW8_512:
- if (mtd->oobblock == 256) {
- printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
- this->eccmode = NAND_ECC_SOFT;
- this->calculate_ecc = nand_calculate_ecc;
- this->correct_data = nand_correct_data;
- } else
- this->eccsize = 512; /* set eccsize to 512 */
- break;
+ * check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * selected and we have 256 byte pagesize fallback to software ECC
+ */
+ switch (chip->ecc.mode) {
+ case NAND_ECC_HW:
+ /* Use standard hwecc read page function ? */
+ if (!chip->ecc.read_page)
+ chip->ecc.read_page = nand_read_page_hwecc;
+ if (!chip->ecc.write_page)
+ chip->ecc.write_page = nand_write_page_hwecc;
+ if (!chip->ecc.read_oob)
+ chip->ecc.read_oob = nand_read_oob_std;
+ if (!chip->ecc.write_oob)
+ chip->ecc.write_oob = nand_write_oob_std;
+
+ case NAND_ECC_HW_SYNDROME:
+ if (!chip->ecc.calculate || !chip->ecc.correct ||
+ !chip->ecc.hwctl) {
+ printk(KERN_WARNING "No ECC functions supplied, "
+ "Hardware ECC not possible\n");
+ BUG();
+ }
+ /* Use standard syndrome read/write page function ? */
+ if (!chip->ecc.read_page)
+ chip->ecc.read_page = nand_read_page_syndrome;
+ if (!chip->ecc.write_page)
+ chip->ecc.write_page = nand_write_page_syndrome;
+ if (!chip->ecc.read_oob)
+ chip->ecc.read_oob = nand_read_oob_syndrome;
+ if (!chip->ecc.write_oob)
+ chip->ecc.write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= chip->ecc.size)
+ break;
+ printk(KERN_WARNING "%d byte HW ECC not possible on "
+ "%d byte page size, fallback to SW ECC\n",
+ chip->ecc.size, mtd->writesize);
+ chip->ecc.mode = NAND_ECC_SOFT;
- case NAND_ECC_HW3_256:
+ case NAND_ECC_SOFT:
+ chip->ecc.calculate = nand_calculate_ecc;
+ chip->ecc.correct = nand_correct_data;
+ chip->ecc.read_page = nand_read_page_swecc;
+ chip->ecc.write_page = nand_write_page_swecc;
+ chip->ecc.read_oob = nand_read_oob_std;
+ chip->ecc.write_oob = nand_write_oob_std;
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
break;
case NAND_ECC_NONE:
- printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
- this->eccmode = NAND_ECC_NONE;
+ printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
+ "This is not recommended !!\n");
+ chip->ecc.read_page = nand_read_page_raw;
+ chip->ecc.write_page = nand_write_page_raw;
+ chip->ecc.read_oob = nand_read_oob_std;
+ chip->ecc.write_oob = nand_write_oob_std;
+ chip->ecc.size = mtd->writesize;
+ chip->ecc.bytes = 0;
break;
-
- case NAND_ECC_SOFT:
- this->calculate_ecc = nand_calculate_ecc;
- this->correct_data = nand_correct_data;
- break;
-
default:
- printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
- BUG();
- }
-
- /* Check hardware ecc function availability and adjust number of ecc bytes per
- * calculation step
- */
- switch (this->eccmode) {
- case NAND_ECC_HW12_2048:
- this->eccbytes += 4;
- case NAND_ECC_HW8_512:
- this->eccbytes += 2;
- case NAND_ECC_HW6_512:
- this->eccbytes += 3;
- case NAND_ECC_HW3_512:
- case NAND_ECC_HW3_256:
- if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
- break;
- printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
+ printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
+ chip->ecc.mode);
BUG();
}
- mtd->eccsize = this->eccsize;
-
- /* Set the number of read / write steps for one page to ensure ECC generation */
- switch (this->eccmode) {
- case NAND_ECC_HW12_2048:
- this->eccsteps = mtd->oobblock / 2048;
- break;
- case NAND_ECC_HW3_512:
- case NAND_ECC_HW6_512:
- case NAND_ECC_HW8_512:
- this->eccsteps = mtd->oobblock / 512;
- break;
- case NAND_ECC_HW3_256:
- case NAND_ECC_SOFT:
- this->eccsteps = mtd->oobblock / 256;
- break;
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area
+ */
+ chip->ecc.layout->oobavail = 0;
+ for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+ chip->ecc.layout->oobavail +=
+ chip->ecc.layout->oobfree[i].length;
- case NAND_ECC_NONE:
- this->eccsteps = 1;
- break;
+ /*
+ * Set the number of read / write steps for one page depending on ECC
+ * mode
+ */
+ chip->ecc.steps = mtd->writesize / chip->ecc.size;
+ if(chip->ecc.steps * chip->ecc.size != mtd->writesize) {
+ printk(KERN_WARNING "Invalid ecc parameters\n");
+ BUG();
}
+ chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- /* Initialize state, waitqueue and spinlock */
- this->state = FL_READY;
- init_waitqueue_head (&this->wq);
- spin_lock_init (&this->chip_lock);
+ /* Initialize state */
+ chip->state = FL_READY;
/* De-select the device */
- this->select_chip(mtd, -1);
+ chip->select_chip(mtd, -1);
/* Invalidate the pagebuffer reference */
- this->pagebuf = -1;
+ chip->pagebuf = -1;
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
- mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
+ mtd->flags = MTD_CAP_NANDFLASH;
mtd->ecctype = MTD_ECC_SW;
mtd->erase = nand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
mtd->read = nand_read;
mtd->write = nand_write;
- mtd->read_ecc = nand_read_ecc;
- mtd->write_ecc = nand_write_ecc;
mtd->read_oob = nand_read_oob;
mtd->write_oob = nand_write_oob;
- mtd->readv = NULL;
- mtd->writev = nand_writev;
- mtd->writev_ecc = nand_writev_ecc;
mtd->sync = nand_sync;
mtd->lock = NULL;
mtd->unlock = NULL;
@@ -2692,47 +2490,38 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
mtd->block_isbad = nand_block_isbad;
mtd->block_markbad = nand_block_markbad;
- /* and make the autooob the default one */
- memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
-
- mtd->owner = THIS_MODULE;
+ /* propagate ecc.layout to mtd_info */
+ mtd->ecclayout = chip->ecc.layout;
/* Check, if we should skip the bad block table scan */
- if (this->options & NAND_SKIP_BBTSCAN)
+ if (chip->options & NAND_SKIP_BBTSCAN)
return 0;
/* Build bad block table */
- return this->scan_bbt (mtd);
+ return chip->scan_bbt(mtd);
}
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
* @mtd: MTD device structure
*/
-void nand_release (struct mtd_info *mtd)
+void nand_release(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *chip = mtd->priv;
#ifdef CONFIG_MTD_PARTITIONS
/* Deregister partitions */
- del_mtd_partitions (mtd);
+ del_mtd_partitions(mtd);
#endif
/* Deregister the device */
- del_mtd_device (mtd);
+ del_mtd_device(mtd);
/* Free bad block table memory */
- kfree (this->bbt);
- /* Buffer allocated by nand_scan ? */
- if (this->options & NAND_OOBBUF_ALLOC)
- kfree (this->oob_buf);
- /* Buffer allocated by nand_scan ? */
- if (this->options & NAND_DATABUF_ALLOC)
- kfree (this->data_buf);
+ kfree(chip->bbt);
}
-EXPORT_SYMBOL_GPL (nand_scan);
-EXPORT_SYMBOL_GPL (nand_release);
-
+EXPORT_SYMBOL_GPL(nand_scan);
+EXPORT_SYMBOL_GPL(nand_release);
static int __init nand_base_init(void)
{
@@ -2748,6 +2537,6 @@ static void __exit nand_base_exit(void)
module_init(nand_base_init);
module_exit(nand_base_exit);
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION ("Generic NAND flash driver code");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Generic NAND flash driver code");
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ca286999fe0..a612c4ea819 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -48,7 +48,7 @@
*
* Following assumptions are made:
* - bbts start at a page boundary, if autolocated on a block boundary
- * - the space neccecary for a bbt in FLASH does not exceed a block boundary
+ * - the space necessary for a bbt in FLASH does not exceed a block boundary
*
*/
@@ -60,7 +60,7 @@
#include <linux/mtd/compatmac.h>
#include <linux/bitops.h>
#include <linux/delay.h>
-
+#include <linux/vmalloc.h>
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
@@ -75,7 +75,7 @@
* pattern area contain 0xff
*
*/
-static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
+static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
int i, end = 0;
uint8_t *p = buf;
@@ -116,7 +116,7 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des
* no optional empty check
*
*/
-static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td)
+static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
{
int i;
uint8_t *p = buf;
@@ -142,8 +142,8 @@ static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td)
* Read the bad block table starting from page.
*
*/
-static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
- int bits, int offs, int reserved_block_code)
+static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
+ int bits, int offs, int reserved_block_code)
{
int res, i, j, act = 0;
struct nand_chip *this = mtd->priv;
@@ -152,17 +152,17 @@ static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
uint8_t msk = (uint8_t) ((1 << bits) - 1);
totlen = (num * bits) >> 3;
- from = ((loff_t)page) << this->page_shift;
+ from = ((loff_t) page) << this->page_shift;
while (totlen) {
- len = min (totlen, (size_t) (1 << this->bbt_erase_shift));
- res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob);
+ len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ res = mtd->read(mtd, from, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk (KERN_INFO "nand_bbt: Error reading bad block table\n");
+ printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
return res;
}
- printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
+ printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
}
/* Analyse data */
@@ -172,22 +172,23 @@ static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
uint8_t tmp = (dat >> j) & msk;
if (tmp == msk)
continue;
- if (reserved_block_code &&
- (tmp == reserved_block_code)) {
- printk (KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ if (reserved_block_code && (tmp == reserved_block_code)) {
+ printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
+ ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
+ mtd->ecc_stats.bbtblocks++;
continue;
}
/* Leave it for now, if its matured we can move this
* message to MTD_DEBUG_LEVEL0 */
- printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
+ ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
/* Factory marked bad or worn out ? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
+ mtd->ecc_stats.badblocks++;
}
}
totlen -= len;
@@ -207,7 +208,7 @@ static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
* Read the bad block table for all chips starting at a given page
* We assume that the bbt bits are in consecutive order.
*/
-static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
+static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
{
struct nand_chip *this = mtd->priv;
int res = 0, i;
@@ -231,6 +232,42 @@ static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
return 0;
}
+/*
+ * Scan read raw data from flash
+ */
+static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+ size_t len)
+{
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OOB_RAW;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = buf;
+ ops.datbuf = buf;
+ ops.len = len;
+
+ return mtd->read_oob(mtd, offs, &ops);
+}
+
+/*
+ * Scan write data with oob to flash
+ */
+static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
+ uint8_t *buf, uint8_t *oob)
+{
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.datbuf = buf;
+ ops.oobbuf = oob;
+ ops.len = len;
+
+ return mtd->write_oob(mtd, offs, &ops);
+}
+
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
* @mtd: MTD device structure
@@ -242,28 +279,85 @@ static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
* We assume that the bbt bits are in consecutive order.
*
*/
-static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td,
- struct nand_bbt_descr *md)
+static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
struct nand_chip *this = mtd->priv;
/* Read the primary version, if available */
if (td->options & NAND_BBT_VERSION) {
- nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
- td->version[0] = buf[mtd->oobblock + td->veroffs];
- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]);
+ scan_read_raw(mtd, buf, td->pages[0] << this->page_shift,
+ mtd->writesize);
+ td->version[0] = buf[mtd->writesize + td->veroffs];
+ printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
}
/* Read the mirror version, if available */
if (md && (md->options & NAND_BBT_VERSION)) {
- nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
- md->version[0] = buf[mtd->oobblock + md->veroffs];
- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]);
+ scan_read_raw(mtd, buf, md->pages[0] << this->page_shift,
+ mtd->writesize);
+ md->version[0] = buf[mtd->writesize + md->veroffs];
+ printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
}
-
return 1;
}
+/*
+ * Scan a given block full
+ */
+static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
+ loff_t offs, uint8_t *buf, size_t readlen,
+ int scanlen, int len)
+{
+ int ret, j;
+
+ ret = scan_read_raw(mtd, buf, offs, readlen);
+ if (ret)
+ return ret;
+
+ for (j = 0; j < len; j++, buf += scanlen) {
+ if (check_pattern(buf, scanlen, mtd->writesize, bd))
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Scan a given block partially
+ */
+static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
+ loff_t offs, uint8_t *buf, int len)
+{
+ struct mtd_oob_ops ops;
+ int j, ret;
+
+ ops.len = mtd->oobsize;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = buf;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_PLACE;
+
+ for (j = 0; j < len; j++) {
+ /*
+ * Read the full oob until read_oob is fixed to
+ * handle single byte reads for 16 bit
+ * buswidth
+ */
+ ret = mtd->read_oob(mtd, offs, &ops);
+ if (ret)
+ return ret;
+
+ if (check_short_pattern(buf, bd))
+ return 1;
+
+ offs += mtd->writesize;
+ }
+ return 0;
+}
+
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
* @mtd: MTD device structure
@@ -275,15 +369,16 @@ static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_de
* Create a bad block table by scanning the device
* for the given good/bad block identify pattern
*/
-static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip)
+static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *bd, int chip)
{
struct nand_chip *this = mtd->priv;
- int i, j, numblocks, len, scanlen;
+ int i, numblocks, len, scanlen;
int startblock;
loff_t from;
- size_t readlen, ooblen;
+ size_t readlen;
- printk (KERN_INFO "Scanning device for bad blocks\n");
+ printk(KERN_INFO "Scanning device for bad blocks\n");
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
@@ -296,25 +391,24 @@ static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
if (!(bd->options & NAND_BBT_SCANEMPTY)) {
/* We need only read few bytes from the OOB area */
- scanlen = ooblen = 0;
+ scanlen = 0;
readlen = bd->len;
} else {
/* Full page content should be read */
- scanlen = mtd->oobblock + mtd->oobsize;
- readlen = len * mtd->oobblock;
- ooblen = len * mtd->oobsize;
+ scanlen = mtd->writesize + mtd->oobsize;
+ readlen = len * mtd->writesize;
}
if (chip == -1) {
- /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it
- * makes shifting and masking less painful */
+ /* Note that numblocks is 2 * (real numblocks) here, see i+=2
+ * below as it makes shifting and masking less painful */
numblocks = mtd->size >> (this->bbt_erase_shift - 1);
startblock = 0;
from = 0;
} else {
if (chip >= this->numchips) {
- printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
- chip + 1, this->numchips);
+ printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+ chip + 1, this->numchips);
return -EINVAL;
}
numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
@@ -326,36 +420,22 @@ static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
for (i = startblock; i < numblocks;) {
int ret;
- if (bd->options & NAND_BBT_SCANEMPTY)
- if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen)))
- return ret;
-
- for (j = 0; j < len; j++) {
- if (!(bd->options & NAND_BBT_SCANEMPTY)) {
- size_t retlen;
-
- /* Read the full oob until read_oob is fixed to
- * handle single byte reads for 16 bit buswidth */
- ret = mtd->read_oob(mtd, from + j * mtd->oobblock,
- mtd->oobsize, &retlen, buf);
- if (ret)
- return ret;
-
- if (check_short_pattern (buf, bd)) {
- this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
- i >> 1, (unsigned int) from);
- break;
- }
- } else {
- if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
- this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
- i >> 1, (unsigned int) from);
- break;
- }
- }
+ if (bd->options & NAND_BBT_SCANALLPAGES)
+ ret = scan_block_full(mtd, bd, from, buf, readlen,
+ scanlen, len);
+ else
+ ret = scan_block_fast(mtd, bd, from, buf, len);
+
+ if (ret < 0)
+ return ret;
+
+ if (ret) {
+ this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+ printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
+ i >> 1, (unsigned int)from);
+ mtd->ecc_stats.badblocks++;
}
+
i += 2;
from += (1 << this->bbt_erase_shift);
}
@@ -374,22 +454,23 @@ static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
* block.
* If the option NAND_BBT_PERCHIP is given, each chip is searched
* for a bbt, which contains the bad block information of this chip.
- * This is neccecary to provide support for certain DOC devices.
+ * This is necessary to provide support for certain DOC devices.
*
* The bbt ident pattern resides in the oob area of the first page
* in a block.
*/
-static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
+static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, chips;
int bits, startblock, block, dir;
- int scanlen = mtd->oobblock + mtd->oobsize;
+ int scanlen = mtd->writesize + mtd->oobsize;
int bbtblocks;
+ int blocktopage = this->bbt_erase_shift - this->page_shift;
/* Search direction top -> down ? */
if (td->options & NAND_BBT_LASTBLOCK) {
- startblock = (mtd->size >> this->bbt_erase_shift) -1;
+ startblock = (mtd->size >> this->bbt_erase_shift) - 1;
dir = -1;
} else {
startblock = 0;
@@ -415,13 +496,16 @@ static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
td->pages[i] = -1;
/* Scan the maximum number of blocks */
for (block = 0; block < td->maxblocks; block++) {
+
int actblock = startblock + dir * block;
+ loff_t offs = actblock << this->bbt_erase_shift;
+
/* Read first page */
- nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize);
- if (!check_pattern(buf, scanlen, mtd->oobblock, td)) {
- td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift);
+ scan_read_raw(mtd, buf, offs, mtd->writesize);
+ if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
+ td->pages[i] = actblock << blocktopage;
if (td->options & NAND_BBT_VERSION) {
- td->version[i] = buf[mtd->oobblock + td->veroffs];
+ td->version[i] = buf[mtd->writesize + td->veroffs];
}
break;
}
@@ -431,9 +515,10 @@ static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
if (td->pages[i] == -1)
- printk (KERN_WARNING "Bad block table not found for chip %d\n", i);
+ printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
else
- printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]);
+ printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
+ td->version[i]);
}
return 0;
}
@@ -447,21 +532,19 @@ static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
*
* Search and read the bad block table(s)
*/
-static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf,
- struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
/* Search the primary table */
- search_bbt (mtd, buf, td);
+ search_bbt(mtd, buf, td);
/* Search the mirror table */
if (md)
- search_bbt (mtd, buf, md);
+ search_bbt(mtd, buf, md);
/* Force result check */
return 1;
}
-
/**
* write_bbt - [GENERIC] (Re)write the bad block table
*
@@ -474,25 +557,31 @@ static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf,
* (Re)write the bad block table
*
*/
-static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
- struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel)
+static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md,
+ int chipsel)
{
struct nand_chip *this = mtd->priv;
- struct nand_oobinfo oobinfo;
struct erase_info einfo;
int i, j, res, chip = 0;
int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
- int nrchips, bbtoffs, pageoffs;
+ int nrchips, bbtoffs, pageoffs, ooboffs;
uint8_t msk[4];
uint8_t rcode = td->reserved_block_code;
size_t retlen, len = 0;
loff_t to;
+ struct mtd_oob_ops ops;
+
+ ops.ooblen = mtd->oobsize;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_PLACE;
if (!rcode)
rcode = 0xff;
/* Write bad block table per chip rather than per device ? */
if (td->options & NAND_BBT_PERCHIP) {
- numblocks = (int) (this->chipsize >> this->bbt_erase_shift);
+ numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
/* Full device write or specific chip ? */
if (chipsel == -1) {
nrchips = this->numchips;
@@ -501,7 +590,7 @@ static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
chip = chipsel;
}
} else {
- numblocks = (int) (mtd->size >> this->bbt_erase_shift);
+ numblocks = (int)(mtd->size >> this->bbt_erase_shift);
nrchips = 1;
}
@@ -530,27 +619,38 @@ static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
for (i = 0; i < td->maxblocks; i++) {
int block = startblock + dir * i;
/* Check, if the block is bad */
- switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) {
+ switch ((this->bbt[block >> 2] >>
+ (2 * (block & 0x03))) & 0x03) {
case 0x01:
case 0x03:
continue;
}
- page = block << (this->bbt_erase_shift - this->page_shift);
+ page = block <<
+ (this->bbt_erase_shift - this->page_shift);
/* Check, if the block is used by the mirror table */
if (!md || md->pages[chip] != page)
goto write;
}
- printk (KERN_ERR "No space left to write bad block table\n");
+ printk(KERN_ERR "No space left to write bad block table\n");
return -ENOSPC;
-write:
+ write:
/* Set up shift count and masks for the flash table */
bits = td->options & NAND_BBT_NRBITS_MSK;
+ msk[2] = ~rcode;
switch (bits) {
- case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break;
- case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break;
- case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break;
- case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break;
+ case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
+ msk[3] = 0x01;
+ break;
+ case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
+ msk[3] = 0x03;
+ break;
+ case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
+ msk[3] = 0x0f;
+ break;
+ case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
+ msk[3] = 0xff;
+ break;
default: return -EINVAL;
}
@@ -558,82 +658,92 @@ write:
to = ((loff_t) page) << this->page_shift;
- memcpy (&oobinfo, this->autooob, sizeof(oobinfo));
- oobinfo.useecc = MTD_NANDECC_PLACEONLY;
-
/* Must we save the block contents ? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
len = 1 << this->bbt_erase_shift;
- res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
+ res = mtd->read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk (KERN_INFO "nand_bbt: Error reading block for writing the bad block table\n");
+ printk(KERN_INFO "nand_bbt: Error "
+ "reading block for writing "
+ "the bad block table\n");
return res;
}
- printk (KERN_WARNING "nand_bbt: ECC error while reading block for writing bad block table\n");
+ printk(KERN_WARNING "nand_bbt: ECC error "
+ "while reading block for writing "
+ "bad block table\n");
}
+ /* Read oob data */
+ ops.len = (len >> this->page_shift) * mtd->oobsize;
+ ops.oobbuf = &buf[len];
+ res = mtd->read_oob(mtd, to + mtd->writesize, &ops);
+ if (res < 0 || ops.retlen != ops.len)
+ goto outerr;
+
/* Calc the byte offset in the buffer */
pageoffs = page - (int)(to >> this->page_shift);
offs = pageoffs << this->page_shift;
/* Preset the bbt area with 0xff */
- memset (&buf[offs], 0xff, (size_t)(numblocks >> sft));
- /* Preset the bbt's oob area with 0xff */
- memset (&buf[len + pageoffs * mtd->oobsize], 0xff,
- ((len >> this->page_shift) - pageoffs) * mtd->oobsize);
- if (td->options & NAND_BBT_VERSION) {
- buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip];
- }
+ memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+ ooboffs = len + (pageoffs * mtd->oobsize);
+
} else {
/* Calc length */
len = (size_t) (numblocks >> sft);
/* Make it page aligned ! */
- len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1);
+ len = (len + (mtd->writesize - 1)) &
+ ~(mtd->writesize - 1);
/* Preset the buffer with 0xff */
- memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize);
+ memset(buf, 0xff, len +
+ (len >> this->page_shift)* mtd->oobsize);
offs = 0;
+ ooboffs = len;
/* Pattern is located in oob area of first page */
- memcpy (&buf[len + td->offs], td->pattern, td->len);
- if (td->options & NAND_BBT_VERSION) {
- buf[len + td->veroffs] = td->version[chip];
- }
+ memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
}
+ if (td->options & NAND_BBT_VERSION)
+ buf[ooboffs + td->veroffs] = td->version[chip];
+
/* walk through the memory table */
- for (i = 0; i < numblocks; ) {
+ for (i = 0; i < numblocks;) {
uint8_t dat;
dat = this->bbt[bbtoffs + (i >> 2)];
- for (j = 0; j < 4; j++ , i++) {
+ for (j = 0; j < 4; j++, i++) {
int sftcnt = (i << (3 - sft)) & sftmsk;
/* Do not store the reserved bbt blocks ! */
- buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt);
+ buf[offs + (i >> sft)] &=
+ ~(msk[dat & 0x03] << sftcnt);
dat >>= 2;
}
}
- memset (&einfo, 0, sizeof (einfo));
+ memset(&einfo, 0, sizeof(einfo));
einfo.mtd = mtd;
- einfo.addr = (unsigned long) to;
+ einfo.addr = (unsigned long)to;
einfo.len = 1 << this->bbt_erase_shift;
- res = nand_erase_nand (mtd, &einfo, 1);
- if (res < 0) {
- printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res);
- return res;
- }
+ res = nand_erase_nand(mtd, &einfo, 1);
+ if (res < 0)
+ goto outerr;
- res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
- if (res < 0) {
- printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res);
- return res;
- }
- printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n",
- (unsigned int) to, td->version[chip]);
+ res = scan_write_bbt(mtd, to, len, buf, &buf[len]);
+ if (res < 0)
+ goto outerr;
+
+ printk(KERN_DEBUG "Bad block table written to 0x%08x, version "
+ "0x%02X\n", (unsigned int)to, td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
}
return 0;
+
+ outerr:
+ printk(KERN_WARNING
+ "nand_bbt: Error while writing bad block table %d\n", res);
+ return res;
}
/**
@@ -644,27 +754,27 @@ write:
* The function creates a memory based bbt by scanning the device
* for manufacturer / software marked good / bad blocks
*/
-static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
bd->options &= ~NAND_BBT_SCANEMPTY;
- return create_bbt (mtd, this->data_buf, bd, -1);
+ return create_bbt(mtd, this->buffers.databuf, bd, -1);
}
/**
- * check_create - [GENERIC] create and write bbt(s) if neccecary
+ * check_create - [GENERIC] create and write bbt(s) if necessary
* @mtd: MTD device structure
* @buf: temporary buffer
* @bd: descriptor for the good/bad block search pattern
*
* The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if neccecary
- * Creation is neccecary if no bbt was found for the chip/device
- * Update is neccecary if one of the tables is missing or the
+ * and creates / updates the bbt(s) if necessary
+ * Creation is necessary if no bbt was found for the chip/device
+ * Update is necessary if one of the tables is missing or the
* version nr. of one table is less than the other
*/
-static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
+static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
{
int i, chips, writeops, chipsel, res;
struct nand_chip *this = mtd->priv;
@@ -732,35 +842,35 @@ static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
rd = td;
goto writecheck;
}
-create:
+ create:
/* Create the bad block table by scanning the device ? */
if (!(td->options & NAND_BBT_CREATE))
continue;
/* Create the table in memory by scanning the chip(s) */
- create_bbt (mtd, buf, bd, chipsel);
+ create_bbt(mtd, buf, bd, chipsel);
td->version[i] = 1;
if (md)
md->version[i] = 1;
-writecheck:
+ writecheck:
/* read back first ? */
if (rd)
- read_abs_bbt (mtd, buf, rd, chipsel);
+ read_abs_bbt(mtd, buf, rd, chipsel);
/* If they weren't versioned, read both. */
if (rd2)
- read_abs_bbt (mtd, buf, rd2, chipsel);
+ read_abs_bbt(mtd, buf, rd2, chipsel);
/* Write the bad block table to the device ? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, td, md, chipsel);
+ res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
return res;
}
/* Write the mirror bad block table to the device ? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, md, td, chipsel);
+ res = write_bbt(mtd, buf, md, td, chipsel);
if (res < 0)
return res;
}
@@ -777,7 +887,7 @@ writecheck:
* accidental erasures / writes. The regions are identified by
* the mark 0x02.
*/
-static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
+static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, j, chips, block, nrblocks, update;
@@ -795,7 +905,8 @@ static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
for (i = 0; i < chips; i++) {
if ((td->options & NAND_BBT_ABSPAGE) ||
!(td->options & NAND_BBT_WRITE)) {
- if (td->pages[i] == -1) continue;
+ if (td->pages[i] == -1)
+ continue;
block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
block <<= 1;
oldval = this->bbt[(block >> 3)];
@@ -815,7 +926,8 @@ static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
oldval = this->bbt[(block >> 3)];
newval = oldval | (0x2 << (block & 0x06));
this->bbt[(block >> 3)] = newval;
- if (oldval != newval) update = 1;
+ if (oldval != newval)
+ update = 1;
block += 2;
}
/* If we want reserved blocks to be recorded to flash, and some
@@ -840,7 +952,7 @@ static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
* by calling the nand_free_bbt function.
*
*/
-int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
+int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
int len, res = 0;
@@ -850,21 +962,21 @@ int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
len = mtd->size >> (this->bbt_erase_shift + 2);
/* Allocate memory (2bit per block) */
- this->bbt = kmalloc (len, GFP_KERNEL);
+ this->bbt = kmalloc(len, GFP_KERNEL);
if (!this->bbt) {
- printk (KERN_ERR "nand_scan_bbt: Out of memory\n");
+ printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
return -ENOMEM;
}
/* Clear the memory bad block table */
- memset (this->bbt, 0x00, len);
+ memset(this->bbt, 0x00, len);
/* If no primary table decriptor is given, scan the device
* to build a memory based bad block table
*/
if (!td) {
if ((res = nand_memory_bbt(mtd, bd))) {
- printk (KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
- kfree (this->bbt);
+ printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+ kfree(this->bbt);
this->bbt = NULL;
}
return res;
@@ -873,35 +985,34 @@ int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
/* Allocate a temporary buffer for one eraseblock incl. oob */
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
- buf = kmalloc (len, GFP_KERNEL);
+ buf = vmalloc(len);
if (!buf) {
- printk (KERN_ERR "nand_bbt: Out of memory\n");
- kfree (this->bbt);
+ printk(KERN_ERR "nand_bbt: Out of memory\n");
+ kfree(this->bbt);
this->bbt = NULL;
return -ENOMEM;
}
/* Is the bbt at a given page ? */
if (td->options & NAND_BBT_ABSPAGE) {
- res = read_abs_bbts (mtd, buf, td, md);
+ res = read_abs_bbts(mtd, buf, td, md);
} else {
/* Search the bad block table using a pattern in oob */
- res = search_read_bbts (mtd, buf, td, md);
+ res = search_read_bbts(mtd, buf, td, md);
}
if (res)
- res = check_create (mtd, buf, bd);
+ res = check_create(mtd, buf, bd);
/* Prevent the bbt regions from erasing / writing */
- mark_bbt_region (mtd, td);
+ mark_bbt_region(mtd, td);
if (md)
- mark_bbt_region (mtd, md);
+ mark_bbt_region(mtd, md);
- kfree (buf);
+ vfree(buf);
return res;
}
-
/**
* nand_update_bbt - [NAND Interface] update bad block table(s)
* @mtd: MTD device structure
@@ -909,7 +1020,7 @@ int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
*
* The function updates the bad block table(s)
*/
-int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
+int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
{
struct nand_chip *this = mtd->priv;
int len, res = 0, writeops = 0;
@@ -925,9 +1036,9 @@ int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
/* Allocate a temporary buffer for one eraseblock incl. oob */
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
- buf = kmalloc (len, GFP_KERNEL);
+ buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- printk (KERN_ERR "nand_update_bbt: Out of memory\n");
+ printk(KERN_ERR "nand_update_bbt: Out of memory\n");
return -ENOMEM;
}
@@ -935,7 +1046,7 @@ int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
/* Do we have a bbt per chip ? */
if (td->options & NAND_BBT_PERCHIP) {
- chip = (int) (offs >> this->chip_shift);
+ chip = (int)(offs >> this->chip_shift);
chipsel = chip;
} else {
chip = 0;
@@ -948,17 +1059,17 @@ int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
/* Write the bad block table to the device ? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, td, md, chipsel);
+ res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
goto out;
}
/* Write the mirror bad block table to the device ? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
- res = write_bbt (mtd, buf, md, td, chipsel);
+ res = write_bbt(mtd, buf, md, td, chipsel);
}
-out:
- kfree (buf);
+ out:
+ kfree(buf);
return res;
}
@@ -981,14 +1092,14 @@ static struct nand_bbt_descr largepage_memorybased = {
};
static struct nand_bbt_descr smallpage_flashbased = {
- .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+ .options = NAND_BBT_SCAN2NDPAGE,
.offs = 5,
.len = 1,
.pattern = scan_ff_pattern
};
static struct nand_bbt_descr largepage_flashbased = {
- .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+ .options = NAND_BBT_SCAN2NDPAGE,
.offs = 0,
.len = 2,
.pattern = scan_ff_pattern
@@ -1036,7 +1147,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
* support for the device and calls the nand_scan_bbt function
*
*/
-int nand_default_bbt (struct mtd_info *mtd)
+int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
@@ -1046,7 +1157,7 @@ int nand_default_bbt (struct mtd_info *mtd)
* of the good / bad information, so we _must_ store
* this information in a good / bad table during
* startup
- */
+ */
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
@@ -1054,10 +1165,9 @@ int nand_default_bbt (struct mtd_info *mtd)
this->bbt_md = &bbt_mirror_descr;
}
this->options |= NAND_USE_FLASH_BBT;
- return nand_scan_bbt (mtd, &agand_flashbased);
+ return nand_scan_bbt(mtd, &agand_flashbased);
}
-
/* Is a flash based bad block table requested ? */
if (this->options & NAND_USE_FLASH_BBT) {
/* Use the default pattern descriptors */
@@ -1066,18 +1176,17 @@ int nand_default_bbt (struct mtd_info *mtd)
this->bbt_md = &bbt_mirror_descr;
}
if (!this->badblock_pattern) {
- this->badblock_pattern = (mtd->oobblock > 512) ?
- &largepage_flashbased : &smallpage_flashbased;
+ this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased;
}
} else {
this->bbt_td = NULL;
this->bbt_md = NULL;
if (!this->badblock_pattern) {
- this->badblock_pattern = (mtd->oobblock > 512) ?
- &largepage_memorybased : &smallpage_memorybased;
+ this->badblock_pattern = (mtd->writesize > 512) ?
+ &largepage_memorybased : &smallpage_memorybased;
}
}
- return nand_scan_bbt (mtd, this->badblock_pattern);
+ return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
@@ -1087,26 +1196,29 @@ int nand_default_bbt (struct mtd_info *mtd)
* @allowbbt: allow access to bad block table region
*
*/
-int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
+int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
int block;
- uint8_t res;
+ uint8_t res;
/* Get block number * 2 */
- block = (int) (offs >> (this->bbt_erase_shift - 1));
+ block = (int)(offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, block >> 1, res);
+ DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
switch ((int)res) {
- case 0x00: return 0;
- case 0x01: return 1;
- case 0x02: return allowbbt ? 0 : 1;
+ case 0x00:
+ return 0;
+ case 0x01:
+ return 1;
+ case 0x02:
+ return allowbbt ? 0 : 1;
}
return 1;
}
-EXPORT_SYMBOL (nand_scan_bbt);
-EXPORT_SYMBOL (nand_default_bbt);
+EXPORT_SYMBOL(nand_scan_bbt);
+EXPORT_SYMBOL(nand_default_bbt);
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 40ac909150a..2a163e4084d 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -7,6 +7,8 @@
* Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
* Toshiba America Electronics Components, Inc.
*
+ * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
* $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
*
* This file is free software; you can redistribute it and/or modify it
@@ -62,90 +64,76 @@ static const u_char nand_ecc_precalc_table[] = {
0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
};
-
/**
- * nand_trans_result - [GENERIC] create non-inverted ECC
- * @reg2: line parity reg 2
- * @reg3: line parity reg 3
- * @ecc_code: ecc
- *
- * Creates non-inverted ECC code from line parity
- */
-static void nand_trans_result(u_char reg2, u_char reg3,
- u_char *ecc_code)
-{
- u_char a, b, i, tmp1, tmp2;
-
- /* Initialize variables */
- a = b = 0x80;
- tmp1 = tmp2 = 0;
-
- /* Calculate first ECC byte */
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Calculate second ECC byte */
- b = 0x80;
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Store two of the ECC bytes */
- ecc_code[0] = tmp1;
- ecc_code[1] = tmp2;
-}
-
-/**
- * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
+ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code
+ * for 256 byte block
* @mtd: MTD block structure
* @dat: raw data
* @ecc_code: buffer for ECC
*/
-int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
{
- u_char idx, reg1, reg2, reg3;
- int j;
+ uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
+ int i;
/* Initialize variables */
reg1 = reg2 = reg3 = 0;
- ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
/* Build up column parity */
- for(j = 0; j < 256; j++) {
-
+ for(i = 0; i < 256; i++) {
/* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[dat[j]];
+ idx = nand_ecc_precalc_table[*dat++];
reg1 ^= (idx & 0x3f);
/* All bit XOR = 1 ? */
if (idx & 0x40) {
- reg3 ^= (u_char) j;
- reg2 ^= ~((u_char) j);
+ reg3 ^= (uint8_t) i;
+ reg2 ^= ~((uint8_t) i);
}
}
/* Create non-inverted ECC code from line parity */
- nand_trans_result(reg2, reg3, ecc_code);
+ tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */
+ tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
+ tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
+ tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
+ tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
+ tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
+ tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
+ tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
+
+ tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */
+ tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
+ tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
+ tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
+ tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
+ tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
+ tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
+ tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
/* Calculate final ECC code */
- ecc_code[0] = ~ecc_code[0];
- ecc_code[1] = ~ecc_code[1];
+#ifdef CONFIG_NAND_ECC_SMC
+ ecc_code[0] = ~tmp2;
+ ecc_code[1] = ~tmp1;
+#else
+ ecc_code[0] = ~tmp1;
+ ecc_code[1] = ~tmp2;
+#endif
ecc_code[2] = ((~reg1) << 2) | 0x03;
+
return 0;
}
+EXPORT_SYMBOL(nand_calculate_ecc);
+
+static inline int countbits(uint32_t byte)
+{
+ int res = 0;
+
+ for (;byte; byte >>= 1)
+ res += byte & 0x01;
+ return res;
+}
/**
* nand_correct_data - [NAND Interface] Detect and correct bit error(s)
@@ -156,93 +144,54 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code
*
* Detect and correct a 1 bit error for 256 byte block
*/
-int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+int nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
{
- u_char a, b, c, d1, d2, d3, add, bit, i;
+ uint8_t s0, s1, s2;
+
+#ifdef CONFIG_NAND_ECC_SMC
+ s0 = calc_ecc[0] ^ read_ecc[0];
+ s1 = calc_ecc[1] ^ read_ecc[1];
+ s2 = calc_ecc[2] ^ read_ecc[2];
+#else
+ s1 = calc_ecc[0] ^ read_ecc[0];
+ s0 = calc_ecc[1] ^ read_ecc[1];
+ s2 = calc_ecc[2] ^ read_ecc[2];
+#endif
+ if ((s0 | s1 | s2) == 0)
+ return 0;
- /* Do error detection */
- d1 = calc_ecc[0] ^ read_ecc[0];
- d2 = calc_ecc[1] ^ read_ecc[1];
- d3 = calc_ecc[2] ^ read_ecc[2];
+ /* Check for a single bit error */
+ if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
+ ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
+ ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
- if ((d1 | d2 | d3) == 0) {
- /* No errors */
- return 0;
- }
- else {
- a = (d1 ^ (d1 >> 1)) & 0x55;
- b = (d2 ^ (d2 >> 1)) & 0x55;
- c = (d3 ^ (d3 >> 1)) & 0x54;
-
- /* Found and will correct single bit error in the data */
- if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
- c = 0x80;
- add = 0;
- a = 0x80;
- for (i=0; i<4; i++) {
- if (d1 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- c = 0x80;
- for (i=0; i<4; i++) {
- if (d2 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- bit = 0;
- b = 0x04;
- c = 0x80;
- for (i=0; i<3; i++) {
- if (d3 & c)
- bit |= b;
- c >>= 2;
- b >>= 1;
- }
- b = 0x01;
- a = dat[add];
- a ^= (b << bit);
- dat[add] = a;
- return 1;
- }
- else {
- i = 0;
- while (d1) {
- if (d1 & 0x01)
- ++i;
- d1 >>= 1;
- }
- while (d2) {
- if (d2 & 0x01)
- ++i;
- d2 >>= 1;
- }
- while (d3) {
- if (d3 & 0x01)
- ++i;
- d3 >>= 1;
- }
- if (i == 1) {
- /* ECC Code Error Correction */
- read_ecc[0] = calc_ecc[0];
- read_ecc[1] = calc_ecc[1];
- read_ecc[2] = calc_ecc[2];
- return 2;
- }
- else {
- /* Uncorrectable Error */
- return -1;
- }
- }
+ uint32_t byteoffs, bitnum;
+
+ byteoffs = (s1 << 0) & 0x80;
+ byteoffs |= (s1 << 1) & 0x40;
+ byteoffs |= (s1 << 2) & 0x20;
+ byteoffs |= (s1 << 3) & 0x10;
+
+ byteoffs |= (s0 >> 4) & 0x08;
+ byteoffs |= (s0 >> 3) & 0x04;
+ byteoffs |= (s0 >> 2) & 0x02;
+ byteoffs |= (s0 >> 1) & 0x01;
+
+ bitnum = (s2 >> 5) & 0x04;
+ bitnum |= (s2 >> 4) & 0x02;
+ bitnum |= (s2 >> 3) & 0x01;
+
+ dat[byteoffs] ^= (1 << bitnum);
+
+ return 1;
}
- /* Should never happen */
+ if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
+ return 1;
+
return -1;
}
-
-EXPORT_SYMBOL(nand_calculate_ecc);
EXPORT_SYMBOL(nand_correct_data);
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index dbc7e55a424..2e2cdf2fc91 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -18,99 +18,110 @@
* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
* options
*
-* Pagesize; 0, 256, 512
-* 0 get this information from the extended chip ID
+* Pagesize; 0, 256, 512
+* 0 get this information from the extended chip ID
+ 256 256 Byte page size
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
-
- /* These are the new chips with large page size. The pagesize
- * and the erasesize is determined from the extended id bytes
- */
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+
+ /*
+ * These are the new chips with large page size. The pagesize and the
+ * erasesize is determined from the extended id bytes
+ */
+#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR)
+#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
+
/*512 Megabit */
- {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16},
/* 1 Gigabit */
- {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
/* 2 Gigabit */
- {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS},
+ {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, LP_OPTIONS},
+ {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, LP_OPTIONS16},
+ {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, LP_OPTIONS16},
/* 4 Gigabit */
- {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, LP_OPTIONS},
+ {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, LP_OPTIONS},
+ {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, LP_OPTIONS16},
+ {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, LP_OPTIONS16},
/* 8 Gigabit */
- {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS},
+ {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS},
+ {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16},
+ {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16},
/* 16 Gigabit */
- {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-
- /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout !
- * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
- * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
- * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
- * There are more speed improvements for reads and writes possible, but not implemented now
+ {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, LP_OPTIONS},
+ {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, LP_OPTIONS},
+ {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16},
+ {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
+
+ /*
+ * Renesas AND 1 Gigabit. Those chips do not support extended id and
+ * have a strange page/block layout ! The chosen minimum erasesize is
+ * 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page
+ * planes 1 block = 2 pages, but due to plane arrangement the blocks
+ * 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 Anyway JFFS2 would
+ * increase the eraseblock size so we chose a combined one which can be
+ * erased in one go There are more speed improvements for reads and
+ * writes possible, but not implemented now
*/
- {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
+ {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000,
+ NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY |
+ BBT_AUTO_REFRESH
+ },
{NULL,}
};
@@ -125,13 +136,13 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_NATIONAL, "National"},
{NAND_MFR_RENESAS, "Renesas"},
{NAND_MFR_STMICRO, "ST Micro"},
- {NAND_MFR_HYNIX, "Hynix"},
+ {NAND_MFR_HYNIX, "Hynix"},
{0x0, "Unknown"}
};
-EXPORT_SYMBOL (nand_manuf_ids);
-EXPORT_SYMBOL (nand_flash_ids);
+EXPORT_SYMBOL(nand_manuf_ids);
+EXPORT_SYMBOL(nand_flash_ids);
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION ("Nand device & manufacturer ID's");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Nand device & manufacturer IDs");
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a0af92cc7ef..ebd64abc8be 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -369,7 +369,7 @@ init_nandsim(struct mtd_info *mtd)
/* Initialize the NAND flash parameters */
ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
ns->geom.totsz = mtd->size;
- ns->geom.pgsz = mtd->oobblock;
+ ns->geom.pgsz = mtd->writesize;
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
@@ -1071,68 +1071,6 @@ switch_state(struct nandsim *ns)
}
}
-static void
-ns_hwcontrol(struct mtd_info *mtd, int cmd)
-{
- struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
-
- switch (cmd) {
-
- /* set CLE line high */
- case NAND_CTL_SETCLE:
- NS_DBG("ns_hwcontrol: start command latch cycles\n");
- ns->lines.cle = 1;
- break;
-
- /* set CLE line low */
- case NAND_CTL_CLRCLE:
- NS_DBG("ns_hwcontrol: stop command latch cycles\n");
- ns->lines.cle = 0;
- break;
-
- /* set ALE line high */
- case NAND_CTL_SETALE:
- NS_DBG("ns_hwcontrol: start address latch cycles\n");
- ns->lines.ale = 1;
- break;
-
- /* set ALE line low */
- case NAND_CTL_CLRALE:
- NS_DBG("ns_hwcontrol: stop address latch cycles\n");
- ns->lines.ale = 0;
- break;
-
- /* set WP line high */
- case NAND_CTL_SETWP:
- NS_DBG("ns_hwcontrol: enable write protection\n");
- ns->lines.wp = 1;
- break;
-
- /* set WP line low */
- case NAND_CTL_CLRWP:
- NS_DBG("ns_hwcontrol: disable write protection\n");
- ns->lines.wp = 0;
- break;
-
- /* set CE line low */
- case NAND_CTL_SETNCE:
- NS_DBG("ns_hwcontrol: enable chip\n");
- ns->lines.ce = 1;
- break;
-
- /* set CE line high */
- case NAND_CTL_CLRNCE:
- NS_DBG("ns_hwcontrol: disable chip\n");
- ns->lines.ce = 0;
- break;
-
- default:
- NS_ERR("hwcontrol: unknown command\n");
- }
-
- return;
-}
-
static u_char
ns_nand_read_byte(struct mtd_info *mtd)
{
@@ -1359,6 +1297,18 @@ ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
return;
}
+static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask)
+{
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
+
+ ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
+ ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
+ ns->lines.ce = bitmask & NAND_NCE ? 1 : 0;
+
+ if (cmd != NAND_CMD_NONE)
+ ns_nand_write_byte(mtd, cmd);
+}
+
static int
ns_device_ready(struct mtd_info *mtd)
{
@@ -1377,17 +1327,6 @@ ns_nand_read_word(struct mtd_info *mtd)
}
static void
-ns_nand_write_word(struct mtd_info *mtd, uint16_t word)
-{
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-
- NS_DBG("write_word\n");
-
- chip->write_byte(mtd, word & 0xFF);
- chip->write_byte(mtd, word >> 8);
-}
-
-static void
ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
@@ -1514,16 +1453,14 @@ static int __init ns_init_module(void)
/*
* Register simulator's callbacks.
*/
- chip->hwcontrol = ns_hwcontrol;
+ chip->cmd_ctrl = ns_hwcontrol;
chip->read_byte = ns_nand_read_byte;
chip->dev_ready = ns_device_ready;
- chip->write_byte = ns_nand_write_byte;
chip->write_buf = ns_nand_write_buf;
chip->read_buf = ns_nand_read_buf;
chip->verify_buf = ns_nand_verify_buf;
- chip->write_word = ns_nand_write_word;
chip->read_word = ns_nand_read_word;
- chip->eccmode = NAND_ECC_SOFT;
+ chip->ecc.mode = NAND_ECC_SOFT;
chip->options |= NAND_SKIP_BBTSCAN;
/*
@@ -1546,6 +1483,8 @@ static int __init ns_init_module(void)
chip->options |= NAND_BUSWIDTH_16;
}
+ nsmtd->owner = THIS_MODULE;
+
if ((retval = nand_scan(nsmtd, 1)) != 0) {
NS_ERR("can't register NAND Simulator\n");
if (retval > 0)
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
new file mode 100644
index 00000000000..fe8d38514ba
--- /dev/null
+++ b/drivers/mtd/nand/ndfc.c
@@ -0,0 +1,311 @@
+/*
+ * drivers/mtd/ndfc.c
+ *
+ * Overview:
+ * Platform independend driver for NDFC (NanD Flash Controller)
+ * integrated into EP440 cores
+ *
+ * Author: Thomas Gleixner
+ *
+ * Copyright 2006 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/ndfc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/ibm44x.h>
+
+struct ndfc_nand_mtd {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct platform_nand_chip *pl_chip;
+};
+
+static struct ndfc_nand_mtd ndfc_mtd[NDFC_MAX_BANKS];
+
+struct ndfc_controller {
+ void __iomem *ndfcbase;
+ struct nand_hw_control ndfc_control;
+ atomic_t childs_active;
+};
+
+static struct ndfc_controller ndfc_ctrl;
+
+static void ndfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ uint32_t ccr;
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ struct nand_chip *nandchip = mtd->priv;
+ struct ndfc_nand_mtd *nandmtd = nandchip->priv;
+ struct platform_nand_chip *pchip = nandmtd->pl_chip;
+
+ ccr = __raw_readl(ndfc->ndfcbase + NDFC_CCR);
+ if (chip >= 0) {
+ ccr &= ~NDFC_CCR_BS_MASK;
+ ccr |= NDFC_CCR_BS(chip + pchip->chip_offset);
+ } else
+ ccr |= NDFC_CCR_RESET_CE;
+ writel(ccr, ndfc->ndfcbase + NDFC_CCR);
+}
+
+static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_CMD);
+ else
+ writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_ALE);
+}
+
+static int ndfc_ready(struct mtd_info *mtd)
+{
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+
+ return __raw_readl(ndfc->ndfcbase + NDFC_STAT) & NDFC_STAT_IS_READY;
+}
+
+static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ uint32_t ccr;
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+
+ ccr = __raw_readl(ndfc->ndfcbase + NDFC_CCR);
+ ccr |= NDFC_CCR_RESET_ECC;
+ __raw_writel(ccr, ndfc->ndfcbase + NDFC_CCR);
+ wmb();
+}
+
+static int ndfc_calculate_ecc(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ uint32_t ecc;
+ uint8_t *p = (uint8_t *)&ecc;
+
+ wmb();
+ ecc = __raw_readl(ndfc->ndfcbase + NDFC_ECC);
+ ecc_code[0] = p[1];
+ ecc_code[1] = p[2];
+ ecc_code[2] = p[3];
+
+ return 0;
+}
+
+/*
+ * Speedups for buffer read/write/verify
+ *
+ * NDFC allows 32bit read/write of data. So we can speed up the buffer
+ * functions. No further checking, as nand_base will always read/write
+ * page aligned.
+ */
+static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ *p++ = __raw_readl(ndfc->ndfcbase + NDFC_DATA);
+}
+
+static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ __raw_writel(*p++, ndfc->ndfcbase + NDFC_DATA);
+}
+
+static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ if (*p++ != __raw_readl(ndfc->ndfcbase + NDFC_DATA))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * Initialize chip structure
+ */
+static void ndfc_chip_init(struct ndfc_nand_mtd *mtd)
+{
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ struct nand_chip *chip = &mtd->chip;
+
+ chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
+ chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_DATA;
+ chip->cmd_ctrl = ndfc_hwcontrol;
+ chip->dev_ready = ndfc_ready;
+ chip->select_chip = ndfc_select_chip;
+ chip->chip_delay = 50;
+ chip->priv = mtd;
+ chip->options = mtd->pl_chip->options;
+ chip->controller = &ndfc->ndfc_control;
+ chip->read_buf = ndfc_read_buf;
+ chip->write_buf = ndfc_write_buf;
+ chip->verify_buf = ndfc_verify_buf;
+ chip->ecc.correct = nand_correct_data;
+ chip->ecc.hwctl = ndfc_enable_hwecc;
+ chip->ecc.calculate = ndfc_calculate_ecc;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ chip->ecclayout = mtd->pl_chip->ecclayout;
+ mtd->mtd.priv = chip;
+ mtd->mtd.owner = THIS_MODULE;
+}
+
+static int ndfc_chip_probe(struct platform_device *pdev)
+{
+ struct platform_nand_chip *nc = pdev->dev.platform_data;
+ struct ndfc_chip_settings *settings = nc->priv;
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ struct ndfc_nand_mtd *nandmtd;
+
+ if (nc->chip_offset >= NDFC_MAX_BANKS || nc->nr_chips > NDFC_MAX_BANKS)
+ return -EINVAL;
+
+ /* Set the bank settings */
+ __raw_writel(settings->bank_settings,
+ ndfc->ndfcbase + NDFC_BCFG0 + (nc->chip_offset << 2));
+
+ nandmtd = &ndfc_mtd[pdev->id];
+ if (nandmtd->pl_chip)
+ return -EBUSY;
+
+ nandmtd->pl_chip = nc;
+ ndfc_chip_init(nandmtd);
+
+ /* Scan for chips */
+ if (nand_scan(&nandmtd->mtd, nc->nr_chips)) {
+ nandmtd->pl_chip = NULL;
+ return -ENODEV;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ printk("Number of partitions %d\n", nc->nr_partitions);
+ if (nc->nr_partitions) {
+ /* Add the full device, so complete dumps can be made */
+ add_mtd_device(&nandmtd->mtd);
+ add_mtd_partitions(&nandmtd->mtd, nc->partitions,
+ nc->nr_partitions);
+
+ } else
+#else
+ add_mtd_device(&nandmtd->mtd);
+#endif
+
+ atomic_inc(&ndfc->childs_active);
+ return 0;
+}
+
+static int ndfc_chip_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int ndfc_nand_probe(struct platform_device *pdev)
+{
+ struct platform_nand_ctrl *nc = pdev->dev.platform_data;
+ struct ndfc_controller_settings *settings = nc->priv;
+ struct resource *res = pdev->resource;
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ unsigned long long phys = settings->ndfc_erpn | res->start;
+
+ ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1);
+ if (!ndfc->ndfcbase) {
+ printk(KERN_ERR "NDFC: ioremap failed\n");
+ return -EIO;
+ }
+
+ __raw_writel(settings->ccr_settings, ndfc->ndfcbase + NDFC_CCR);
+
+ spin_lock_init(&ndfc->ndfc_control.lock);
+ init_waitqueue_head(&ndfc->ndfc_control.wq);
+
+ platform_set_drvdata(pdev, ndfc);
+
+ printk("NDFC NAND Driver initialized. Chip-Rev: 0x%08x\n",
+ __raw_readl(ndfc->ndfcbase + NDFC_REVID));
+
+ return 0;
+}
+
+static int ndfc_nand_remove(struct platform_device *pdev)
+{
+ struct ndfc_controller *ndfc = platform_get_drvdata(pdev);
+
+ if (atomic_read(&ndfc->childs_active))
+ return -EBUSY;
+
+ if (ndfc) {
+ platform_set_drvdata(pdev, NULL);
+ iounmap(ndfc_ctrl.ndfcbase);
+ ndfc_ctrl.ndfcbase = NULL;
+ }
+ return 0;
+}
+
+/* driver device registration */
+
+static struct platform_driver ndfc_chip_driver = {
+ .probe = ndfc_chip_probe,
+ .remove = ndfc_chip_remove,
+ .driver = {
+ .name = "ndfc-chip",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver ndfc_nand_driver = {
+ .probe = ndfc_nand_probe,
+ .remove = ndfc_nand_remove,
+ .driver = {
+ .name = "ndfc-nand",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ndfc_nand_init(void)
+{
+ int ret;
+
+ spin_lock_init(&ndfc_ctrl.ndfc_control.lock);
+ init_waitqueue_head(&ndfc_ctrl.ndfc_control.wq);
+
+ ret = platform_driver_register(&ndfc_nand_driver);
+ if (!ret)
+ ret = platform_driver_register(&ndfc_chip_driver);
+ return ret;
+}
+
+static void __exit ndfc_nand_exit(void)
+{
+ platform_driver_unregister(&ndfc_chip_driver);
+ platform_driver_unregister(&ndfc_nand_driver);
+}
+
+module_init(ndfc_nand_init);
+module_exit(ndfc_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Platform driver for NDFC");
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 91a95f34a6e..22fa65c12ab 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -58,21 +58,21 @@
/*
* MTD structure for PPChameleonEVB board
*/
-static struct mtd_info *ppchameleon_mtd = NULL;
+static struct mtd_info *ppchameleon_mtd = NULL;
static struct mtd_info *ppchameleonevb_mtd = NULL;
/*
* Module stuff
*/
-static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
+static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
#ifdef MODULE
module_param(ppchameleon_fio_pbase, ulong, 0);
module_param(ppchameleonevb_fio_pbase, ulong, 0);
#else
-__setup("ppchameleon_fio_pbase=",ppchameleon_fio_pbase);
-__setup("ppchameleonevb_fio_pbase=",ppchameleonevb_fio_pbase);
+__setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase);
+__setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase);
#endif
#ifdef CONFIG_MTD_PARTITIONS
@@ -80,82 +80,96 @@ __setup("ppchameleonevb_fio_pbase=",ppchameleonevb_fio_pbase);
* Define static partitions for flash devices
*/
static struct mtd_partition partition_info_hi[] = {
- { name: "PPChameleon HI Nand Flash",
- offset: 0,
- size: 128*1024*1024 }
+ { .name = "PPChameleon HI Nand Flash",
+ offset = 0,
+ .size = 128 * 1024 * 1024
+ }
};
static struct mtd_partition partition_info_me[] = {
- { name: "PPChameleon ME Nand Flash",
- offset: 0,
- size: 32*1024*1024 }
+ { .name = "PPChameleon ME Nand Flash",
+ .offset = 0,
+ .size = 32 * 1024 * 1024
+ }
};
static struct mtd_partition partition_info_evb[] = {
- { name: "PPChameleonEVB Nand Flash",
- offset: 0,
- size: 32*1024*1024 }
+ { .name = "PPChameleonEVB Nand Flash",
+ .offset = 0,
+ .size = 32 * 1024 * 1024
+ }
};
#define NUM_PARTITIONS 1
-extern int parse_cmdline_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- const char *mtd_id);
+extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
#endif
-
/*
* hardware specific access to control-lines
*/
-static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd,
+ unsigned int ctrl)
{
- switch(cmd) {
-
- case NAND_CTL_SETCLE:
- MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRCLE:
- MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_SETALE:
- MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRALE:
- MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_SETNCE:
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+#error Missing headerfiles. No way to fix this. -tglx
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
+ break;
+ case NAND_CTL_CLRCLE:
+ MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
+ break;
+ case NAND_CTL_SETALE:
+ MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
+ break;
+ case NAND_CTL_CLRALE:
+ MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
+ break;
+ case NAND_CTL_SETNCE:
MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRNCE:
+ break;
+ case NAND_CTL_CLRNCE:
MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
- break;
+ break;
+ }
}
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
-static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd,
+ unsigned int ctrl)
{
- switch(cmd) {
-
- case NAND_CTL_SETCLE:
- MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRCLE:
- MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_SETALE:
- MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRALE:
- MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_SETNCE:
- MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRNCE:
- MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
- break;
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+#error Missing headerfiles. No way to fix this. -tglx
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
+ break;
+ case NAND_CTL_CLRCLE:
+ MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
+ break;
+ case NAND_CTL_SETALE:
+ MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
+ break;
+ case NAND_CTL_CLRALE:
+ MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
+ break;
+ case NAND_CTL_SETNCE:
+ MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
+ break;
+ case NAND_CTL_CLRNCE:
+ MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
+ break;
+ }
}
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
#ifdef USE_READY_BUSY_PIN
@@ -164,15 +178,15 @@ static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd)
*/
static int ppchameleon_device_ready(struct mtd_info *minfo)
{
- if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_RB_GPIO_PIN)
+ if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN)
return 1;
return 0;
}
static int ppchameleonevb_device_ready(struct mtd_info *minfo)
{
- if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
- return 1;
+ if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
+ return 1;
return 0;
}
#endif
@@ -185,7 +199,7 @@ const char *part_probes_evb[] = { "cmdlinepart", NULL };
/*
* Main initialization routine
*/
-static int __init ppchameleonevb_init (void)
+static int __init ppchameleonevb_init(void)
{
struct nand_chip *this;
const char *part_type = 0;
@@ -194,13 +208,11 @@ static int __init ppchameleonevb_init (void)
void __iomem *ppchameleon_fio_base;
void __iomem *ppchameleonevb_fio_base;
-
/*********************************
* Processor module NAND (if any) *
*********************************/
/* Allocate memory for MTD device structure and private data */
- ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) +
- sizeof(struct nand_chip), GFP_KERNEL);
+ ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!ppchameleon_mtd) {
printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
return -ENOMEM;
@@ -208,63 +220,65 @@ static int __init ppchameleonevb_init (void)
/* map physical address */
ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
- if(!ppchameleon_fio_base) {
+ if (!ppchameleon_fio_base) {
printk("ioremap PPChameleon NAND flash failed\n");
kfree(ppchameleon_mtd);
return -EIO;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&ppchameleon_mtd[1]);
+ this = (struct nand_chip *)(&ppchameleon_mtd[1]);
/* Initialize structures */
- memset((char *) ppchameleon_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(ppchameleon_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
ppchameleon_mtd->priv = this;
+ ppchameleon_mtd->owner = THIS_MODULE;
- /* Initialize GPIOs */
+ /* Initialize GPIOs */
/* Pin mapping for NAND chip */
/*
- CE GPIO_01
- CLE GPIO_02
- ALE GPIO_03
- R/B GPIO_04
- */
+ CE GPIO_01
+ CLE GPIO_02
+ ALE GPIO_03
+ R/B GPIO_04
+ */
/* output select */
- out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xC0FFFFFF);
+ out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF);
/* three-state select */
- out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xC0FFFFFF);
+ out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF);
/* enable output driver */
- out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
+ out_be32((volatile unsigned *)GPIO0_TCR,
+ in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
#ifdef USE_READY_BUSY_PIN
/* three-state select */
- out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFF3FFFFF);
+ out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF);
/* high-impedecence */
- out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
+ out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
/* input select */
- out_be32((volatile unsigned*)GPIO0_ISR1H, (in_be32((volatile unsigned*)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
+ out_be32((volatile unsigned *)GPIO0_ISR1H,
+ (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
#endif
/* insert callbacks */
this->IO_ADDR_R = ppchameleon_fio_base;
this->IO_ADDR_W = ppchameleon_fio_base;
- this->hwcontrol = ppchameleon_hwcontrol;
+ this->cmd_ctrl = ppchameleon_hwcontrol;
#ifdef USE_READY_BUSY_PIN
this->dev_ready = ppchameleon_device_ready;
#endif
this->chip_delay = NAND_BIG_DELAY_US;
/* ECC mode */
- this->eccmode = NAND_ECC_SOFT;
+ this->ecc.mode = NAND_ECC_SOFT;
/* Scan to find existence of the device (it could not be mounted) */
- if (nand_scan (ppchameleon_mtd, 1)) {
+ if (nand_scan(ppchameleon_mtd, 1)) {
iounmap((void *)ppchameleon_fio_base);
- kfree (ppchameleon_mtd);
+ kfree(ppchameleon_mtd);
goto nand_evb_init;
}
-
#ifndef USE_READY_BUSY_PIN
/* Adjust delay if necessary */
if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
@@ -275,12 +289,11 @@ static int __init ppchameleonevb_init (void)
ppchameleon_mtd->name = "ppchameleon-nand";
mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
if (mtd_parts_nb > 0)
- part_type = "command line";
+ part_type = "command line";
else
- mtd_parts_nb = 0;
+ mtd_parts_nb = 0;
#endif
- if (mtd_parts_nb == 0)
- {
+ if (mtd_parts_nb == 0) {
if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
mtd_parts = partition_info_me;
else
@@ -293,13 +306,12 @@ static int __init ppchameleonevb_init (void)
printk(KERN_NOTICE "Using %s partition definition\n", part_type);
add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
-nand_evb_init:
+ nand_evb_init:
/****************************
* EVB NAND (always present) *
****************************/
/* Allocate memory for MTD device structure and private data */
- ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) +
- sizeof(struct nand_chip), GFP_KERNEL);
+ ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!ppchameleonevb_mtd) {
printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
return -ENOMEM;
@@ -307,77 +319,76 @@ nand_evb_init:
/* map physical address */
ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
- if(!ppchameleonevb_fio_base) {
+ if (!ppchameleonevb_fio_base) {
printk("ioremap PPChameleonEVB NAND flash failed\n");
kfree(ppchameleonevb_mtd);
return -EIO;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&ppchameleonevb_mtd[1]);
+ this = (struct nand_chip *)(&ppchameleonevb_mtd[1]);
/* Initialize structures */
- memset((char *) ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
ppchameleonevb_mtd->priv = this;
- /* Initialize GPIOs */
+ /* Initialize GPIOs */
/* Pin mapping for NAND chip */
/*
- CE GPIO_14
- CLE GPIO_15
- ALE GPIO_16
- R/B GPIO_31
- */
+ CE GPIO_14
+ CLE GPIO_15
+ ALE GPIO_16
+ R/B GPIO_31
+ */
/* output select */
- out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xFFFFFFF0);
- out_be32((volatile unsigned*)GPIO0_OSRL, in_be32((volatile unsigned*)GPIO0_OSRL) & 0x3FFFFFFF);
+ out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0);
+ out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF);
/* three-state select */
- out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFFFFFFF0);
- out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0x3FFFFFFF);
+ out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0);
+ out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF);
/* enable output driver */
- out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
+ out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
#ifdef USE_READY_BUSY_PIN
/* three-state select */
- out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0xFFFFFFFC);
+ out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC);
/* high-impedecence */
- out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
+ out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
/* input select */
- out_be32((volatile unsigned*)GPIO0_ISR1L, (in_be32((volatile unsigned*)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
+ out_be32((volatile unsigned *)GPIO0_ISR1L,
+ (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
#endif
/* insert callbacks */
this->IO_ADDR_R = ppchameleonevb_fio_base;
this->IO_ADDR_W = ppchameleonevb_fio_base;
- this->hwcontrol = ppchameleonevb_hwcontrol;
+ this->cmd_ctrl = ppchameleonevb_hwcontrol;
#ifdef USE_READY_BUSY_PIN
this->dev_ready = ppchameleonevb_device_ready;
#endif
this->chip_delay = NAND_SMALL_DELAY_US;
/* ECC mode */
- this->eccmode = NAND_ECC_SOFT;
+ this->ecc.mode = NAND_ECC_SOFT;
/* Scan to find existence of the device */
- if (nand_scan (ppchameleonevb_mtd, 1)) {
+ if (nand_scan(ppchameleonevb_mtd, 1)) {
iounmap((void *)ppchameleonevb_fio_base);
- kfree (ppchameleonevb_mtd);
+ kfree(ppchameleonevb_mtd);
return -ENXIO;
}
-
#ifdef CONFIG_MTD_PARTITIONS
ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
if (mtd_parts_nb > 0)
- part_type = "command line";
+ part_type = "command line";
else
- mtd_parts_nb = 0;
+ mtd_parts_nb = 0;
#endif
- if (mtd_parts_nb == 0)
- {
+ if (mtd_parts_nb == 0) {
mtd_parts = partition_info_evb;
mtd_parts_nb = NUM_PARTITIONS;
part_type = "static";
@@ -390,18 +401,19 @@ nand_evb_init:
/* Return happy */
return 0;
}
+
module_init(ppchameleonevb_init);
/*
* Clean up routine
*/
-static void __exit ppchameleonevb_cleanup (void)
+static void __exit ppchameleonevb_cleanup(void)
{
struct nand_chip *this;
/* Release resources, unregister device(s) */
- nand_release (ppchameleon_mtd);
- nand_release (ppchameleonevb_mtd);
+ nand_release(ppchameleon_mtd);
+ nand_release(ppchameleonevb_mtd);
/* Release iomaps */
this = (struct nand_chip *) &ppchameleon_mtd[1];
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 4129c03dfd9..f8c49645324 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -97,12 +97,12 @@ static struct mtd_info *rtc_from4_mtd = NULL;
static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE);
static const struct mtd_partition partition_info[] = {
- {
- .name = "Renesas flash partition 1",
- .offset = 0,
- .size = MTDPART_SIZ_FULL
- },
+ {
+ .name = "Renesas flash partition 1",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL},
};
+
#define NUM_PARTITIONS 1
/*
@@ -111,8 +111,8 @@ static const struct mtd_partition partition_info[] = {
* NAND_BBT_CREATE and/or NAND_BBT_WRITE
*
*/
-static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
-static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
+static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
static struct nand_bbt_descr rtc_from4_bbt_main_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
@@ -134,8 +134,6 @@ static struct nand_bbt_descr rtc_from4_bbt_mirror_descr = {
.pattern = mirror_pattern
};
-
-
#ifdef RTC_FROM4_HWECC
/* the Reed Solomon control structure */
@@ -144,15 +142,14 @@ static struct rs_control *rs_decoder;
/*
* hardware specific Out Of Band information
*/
-static struct nand_oobinfo rtc_from4_nand_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout rtc_from4_nand_oobinfo = {
.eccbytes = 32,
.eccpos = {
- 0, 1, 2, 3, 4, 5, 6, 7,
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31},
- .oobfree = { {32, 32} }
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31},
+ .oobfree = {{32, 32}}
};
/* Aargh. I missed the reversed bit order, when I
@@ -162,44 +159,42 @@ static struct nand_oobinfo rtc_from4_nand_oobinfo = {
* of the ecc byte which we get from the FPGA
*/
static uint8_t revbits[256] = {
- 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
- 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
- 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
- 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
- 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
- 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
- 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
- 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
- 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
- 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
- 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
- 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
- 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
- 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
- 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
- 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
- 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
- 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
- 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
- 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
- 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
- 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
- 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
- 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
- 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
- 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
- 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
- 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
- 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
- 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
- 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
- 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+ 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+ 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+ 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+ 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+ 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+ 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+ 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+ 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+ 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+ 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+ 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+ 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+ 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+ 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+ 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+ 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+ 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+ 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+ 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+ 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+ 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+ 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+ 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+ 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+ 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+ 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+ 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+ 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+ 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+ 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+ 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+ 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
};
#endif
-
-
/*
* rtc_from4_hwcontrol - hardware specific access to control-lines
* @mtd: MTD device structure
@@ -212,35 +207,20 @@ static uint8_t revbits[256] = {
* Address lines (A24-A22), so no action is required here.
*
*/
-static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd)
+static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
- struct nand_chip* this = (struct nand_chip *) (mtd->priv);
-
- switch(cmd) {
+ struct nand_chip *chip = (mtd->priv);
- case NAND_CTL_SETCLE:
- this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_CLE);
- break;
- case NAND_CTL_CLRCLE:
- this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_CLE);
- break;
-
- case NAND_CTL_SETALE:
- this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_ALE);
- break;
- case NAND_CTL_CLRALE:
- this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_ALE);
- break;
+ if (cmd == NAND_CMD_NONE)
+ return;
- case NAND_CTL_SETNCE:
- break;
- case NAND_CTL_CLRNCE:
- break;
-
- }
+ if (ctrl & NAND_CLE)
+ writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_CLE);
+ else
+ writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_ALE);
}
-
/*
* rtc_from4_nand_select_chip - hardware specific chip select
* @mtd: MTD device structure
@@ -252,26 +232,25 @@ static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd)
*/
static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *this = mtd->priv;
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R & ~RTC_FROM4_NAND_ADDR_MASK);
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_NAND_ADDR_MASK);
- switch(chip) {
+ switch (chip) {
- case 0: /* select slot 3 chip */
+ case 0: /* select slot 3 chip */
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT3);
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT3);
- break;
- case 1: /* select slot 4 chip */
+ break;
+ case 1: /* select slot 4 chip */
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT4);
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT4);
- break;
+ break;
- }
+ }
}
-
/*
* rtc_from4_nand_device_ready - hardware specific ready/busy check
* @mtd: MTD device structure
@@ -290,7 +269,6 @@ static int rtc_from4_nand_device_ready(struct mtd_info *mtd)
}
-
/*
* deplete - code to perform device recovery in case there was a power loss
* @mtd: MTD device structure
@@ -306,24 +284,23 @@ static int rtc_from4_nand_device_ready(struct mtd_info *mtd)
*/
static void deplete(struct mtd_info *mtd, int chip)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *this = mtd->priv;
- /* wait until device is ready */
- while (!this->dev_ready(mtd));
+ /* wait until device is ready */
+ while (!this->dev_ready(mtd)) ;
this->select_chip(mtd, chip);
/* Send the commands for device recovery, phase 1 */
- this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000);
- this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1);
+ this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000);
+ this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1);
/* Send the commands for device recovery, phase 2 */
- this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004);
- this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1);
+ this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004);
+ this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1);
}
-
#ifdef RTC_FROM4_HWECC
/*
* rtc_from4_enable_hwecc - hardware specific hardware ECC enable function
@@ -335,39 +312,35 @@ static void deplete(struct mtd_info *mtd, int chip)
*/
static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode)
{
- volatile unsigned short * rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL);
+ volatile unsigned short *rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL);
unsigned short status;
switch (mode) {
- case NAND_ECC_READ :
- status = RTC_FROM4_RS_ECC_CTL_CLR
- | RTC_FROM4_RS_ECC_CTL_FD_E;
+ case NAND_ECC_READ:
+ status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_FD_E;
*rs_ecc_ctl = status;
break;
- case NAND_ECC_READSYN :
- status = 0x00;
+ case NAND_ECC_READSYN:
+ status = 0x00;
*rs_ecc_ctl = status;
break;
- case NAND_ECC_WRITE :
- status = RTC_FROM4_RS_ECC_CTL_CLR
- | RTC_FROM4_RS_ECC_CTL_GEN
- | RTC_FROM4_RS_ECC_CTL_FD_E;
+ case NAND_ECC_WRITE:
+ status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_GEN | RTC_FROM4_RS_ECC_CTL_FD_E;
*rs_ecc_ctl = status;
break;
- default:
+ default:
BUG();
break;
}
}
-
/*
* rtc_from4_calculate_ecc - hardware specific code to read ECC code
* @mtd: MTD device structure
@@ -383,7 +356,7 @@ static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode)
*/
static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
- volatile unsigned short * rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN);
+ volatile unsigned short *rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN);
unsigned short value;
int i;
@@ -395,7 +368,6 @@ static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_c
ecc_code[7] |= 0x0f; /* set the last four bits (not used) */
}
-
/*
* rtc_from4_correct_data - hardware specific code to correct data using ECC code
* @mtd: MTD device structure
@@ -414,7 +386,7 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
unsigned short status;
uint16_t par[6], syn[6];
uint8_t ecc[8];
- volatile unsigned short *rs_ecc;
+ volatile unsigned short *rs_ecc;
status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CHK));
@@ -424,23 +396,18 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
/* Read the syndrom pattern from the FPGA and correct the bitorder */
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
- for (i = 0; i < 8; i++) {
- ecc[i] = revbits[(*rs_ecc) & 0xFF];
- rs_ecc++;
- }
+ for (i = 0; i < 8; i++) {
+ ecc[i] = revbits[(*rs_ecc) & 0xFF];
+ rs_ecc++;
+ }
/* convert into 6 10bit syndrome fields */
- par[5] = rs_decoder->index_of[(((uint16_t)ecc[0] >> 0) & 0x0ff) |
- (((uint16_t)ecc[1] << 8) & 0x300)];
- par[4] = rs_decoder->index_of[(((uint16_t)ecc[1] >> 2) & 0x03f) |
- (((uint16_t)ecc[2] << 6) & 0x3c0)];
- par[3] = rs_decoder->index_of[(((uint16_t)ecc[2] >> 4) & 0x00f) |
- (((uint16_t)ecc[3] << 4) & 0x3f0)];
- par[2] = rs_decoder->index_of[(((uint16_t)ecc[3] >> 6) & 0x003) |
- (((uint16_t)ecc[4] << 2) & 0x3fc)];
- par[1] = rs_decoder->index_of[(((uint16_t)ecc[5] >> 0) & 0x0ff) |
- (((uint16_t)ecc[6] << 8) & 0x300)];
- par[0] = (((uint16_t)ecc[6] >> 2) & 0x03f) | (((uint16_t)ecc[7] << 6) & 0x3c0);
+ par[5] = rs_decoder->index_of[(((uint16_t) ecc[0] >> 0) & 0x0ff) | (((uint16_t) ecc[1] << 8) & 0x300)];
+ par[4] = rs_decoder->index_of[(((uint16_t) ecc[1] >> 2) & 0x03f) | (((uint16_t) ecc[2] << 6) & 0x3c0)];
+ par[3] = rs_decoder->index_of[(((uint16_t) ecc[2] >> 4) & 0x00f) | (((uint16_t) ecc[3] << 4) & 0x3f0)];
+ par[2] = rs_decoder->index_of[(((uint16_t) ecc[3] >> 6) & 0x003) | (((uint16_t) ecc[4] << 2) & 0x3fc)];
+ par[1] = rs_decoder->index_of[(((uint16_t) ecc[5] >> 0) & 0x0ff) | (((uint16_t) ecc[6] << 8) & 0x300)];
+ par[0] = (((uint16_t) ecc[6] >> 2) & 0x03f) | (((uint16_t) ecc[7] << 6) & 0x3c0);
/* Convert to computable syndrome */
for (i = 0; i < 6; i++) {
@@ -453,16 +420,14 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
syn[i] = rs_decoder->index_of[syn[i]];
}
- /* Let the library code do its magic.*/
- res = decode_rs8(rs_decoder, (uint8_t *)buf, par, 512, syn, 0, NULL, 0xff, NULL);
+ /* Let the library code do its magic. */
+ res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
if (res > 0) {
- DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: "
- "ECC corrected %d errors on read\n", res);
+ DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
}
return res;
}
-
/**
* rtc_from4_errstat - perform additional error status checks
* @mtd: MTD device structure
@@ -478,54 +443,66 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
* note: see pages 34..37 of data sheet for details.
*
*/
-static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page)
+static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this,
+ int state, int status, int page)
{
- int er_stat=0;
- int rtn, retlen;
- size_t len;
+ int er_stat = 0;
+ int rtn, retlen;
+ size_t len;
uint8_t *buf;
- int i;
-
- this->cmdfunc (mtd, NAND_CMD_STATUS_CLEAR, -1, -1);
-
- if (state == FL_ERASING) {
- for (i=0; i<4; i++) {
- if (status & 1<<(i+1)) {
- this->cmdfunc (mtd, (NAND_CMD_STATUS_ERROR + i + 1), -1, -1);
- rtn = this->read_byte(mtd);
- this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1);
- if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
- er_stat |= 1<<(i+1); /* err_ecc_not_avail */
- }
- }
+ int i;
+
+ this->cmdfunc(mtd, NAND_CMD_STATUS_CLEAR, -1, -1);
+
+ if (state == FL_ERASING) {
+
+ for (i = 0; i < 4; i++) {
+ if (!(status & 1 << (i + 1)))
+ continue;
+ this->cmdfunc(mtd, (NAND_CMD_STATUS_ERROR + i + 1),
+ -1, -1);
+ rtn = this->read_byte(mtd);
+ this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
+
+ /* err_ecc_not_avail */
+ if (!(rtn & ERR_STAT_ECC_AVAILABLE))
+ er_stat |= 1 << (i + 1);
}
+
} else if (state == FL_WRITING) {
+
+ unsigned long corrected = mtd->ecc_stats.corrected;
+
/* single bank write logic */
- this->cmdfunc (mtd, NAND_CMD_STATUS_ERROR, -1, -1);
+ this->cmdfunc(mtd, NAND_CMD_STATUS_ERROR, -1, -1);
rtn = this->read_byte(mtd);
- this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1);
+ this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
+
if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
- er_stat |= 1<<1; /* err_ecc_not_avail */
- } else {
- len = mtd->oobblock;
- buf = kmalloc (len, GFP_KERNEL);
- if (!buf) {
- printk (KERN_ERR "rtc_from4_errstat: Out of memory!\n");
- er_stat = 1; /* if we can't check, assume failed */
- } else {
- /* recovery read */
- /* page read */
- rtn = nand_do_read_ecc (mtd, page, len, &retlen, buf, NULL, this->autooob, 1);
- if (rtn) { /* if read failed or > 1-bit error corrected */
- er_stat |= 1<<1; /* ECC read failed */
- }
- kfree(buf);
- }
+ /* err_ecc_not_avail */
+ er_stat |= 1 << 1;
+ goto out;
+ }
+
+ len = mtd->writesize;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
+ er_stat = 1;
+ goto out;
}
+
+ /* recovery read */
+ rtn = nand_do_read(mtd, page, len, &retlen, buf);
+
+ /* if read failed or > 1-bit error corrected */
+ if (rtn || (mtd->ecc_stats.corrected - corrected) > 1) {
+ er_stat |= 1 << 1;
+ kfree(buf);
}
rtn = status;
- if (er_stat == 0) { /* if ECC is available */
+ if (er_stat == 0) { /* if ECC is available */
rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */
}
@@ -533,33 +510,32 @@ static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int s
}
#endif
-
/*
* Main initialization routine
*/
-int __init rtc_from4_init (void)
+static int __init rtc_from4_init(void)
{
struct nand_chip *this;
unsigned short bcr1, bcr2, wcr2;
int i;
/* Allocate memory for MTD device structure and private data */
- rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof (struct nand_chip),
- GFP_KERNEL);
+ rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!rtc_from4_mtd) {
- printk ("Unable to allocate Renesas NAND MTD device structure.\n");
+ printk("Unable to allocate Renesas NAND MTD device structure.\n");
return -ENOMEM;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&rtc_from4_mtd[1]);
+ this = (struct nand_chip *)(&rtc_from4_mtd[1]);
/* Initialize structures */
- memset((char *) rtc_from4_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(rtc_from4_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
rtc_from4_mtd->priv = this;
+ rtc_from4_mtd->owner = THIS_MODULE;
/* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */
bcr1 = *SH77X9_BCR1 & ~0x0002;
@@ -580,9 +556,9 @@ int __init rtc_from4_init (void)
this->IO_ADDR_R = rtc_from4_fio_base;
this->IO_ADDR_W = rtc_from4_fio_base;
/* Set address of hardware control function */
- this->hwcontrol = rtc_from4_hwcontrol;
+ this->cmd_ctrl = rtc_from4_hwcontrol;
/* Set address of chip select function */
- this->select_chip = rtc_from4_nand_select_chip;
+ this->select_chip = rtc_from4_nand_select_chip;
/* command delay time (in us) */
this->chip_delay = 100;
/* return the status of the Ready/Busy line */
@@ -591,19 +567,20 @@ int __init rtc_from4_init (void)
#ifdef RTC_FROM4_HWECC
printk(KERN_INFO "rtc_from4_init: using hardware ECC detection.\n");
- this->eccmode = NAND_ECC_HW8_512;
- this->options |= NAND_HWECC_SYNDROME;
+ this->ecc.mode = NAND_ECC_HW_SYNDROME;
+ this->ecc.size = 512;
+ this->ecc.bytes = 8;
/* return the status of extra status and ECC checks */
this->errstat = rtc_from4_errstat;
/* set the nand_oobinfo to support FPGA H/W error detection */
- this->autooob = &rtc_from4_nand_oobinfo;
- this->enable_hwecc = rtc_from4_enable_hwecc;
- this->calculate_ecc = rtc_from4_calculate_ecc;
- this->correct_data = rtc_from4_correct_data;
+ this->ecc.layout = &rtc_from4_nand_oobinfo;
+ this->ecc.hwctl = rtc_from4_enable_hwecc;
+ this->ecc.calculate = rtc_from4_calculate_ecc;
+ this->ecc.correct = rtc_from4_correct_data;
#else
printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n");
- this->eccmode = NAND_ECC_SOFT;
+ this->ecc.mode = NAND_ECC_SOFT;
#endif
/* set the bad block tables to support debugging */
@@ -617,7 +594,7 @@ int __init rtc_from4_init (void)
}
/* Perform 'device recovery' for each chip in case there was a power loss. */
- for (i=0; i < this->numchips; i++) {
+ for (i = 0; i < this->numchips; i++) {
deplete(rtc_from4_mtd, i);
}
@@ -643,7 +620,7 @@ int __init rtc_from4_init (void)
*/
rs_decoder = init_rs(10, 0x409, 0, 1, 6);
if (!rs_decoder) {
- printk (KERN_ERR "Could not create a RS decoder\n");
+ printk(KERN_ERR "Could not create a RS decoder\n");
nand_release(rtc_from4_mtd);
kfree(rtc_from4_mtd);
return -ENOMEM;
@@ -652,20 +629,19 @@ int __init rtc_from4_init (void)
/* Return happy */
return 0;
}
-module_init(rtc_from4_init);
+module_init(rtc_from4_init);
/*
* Clean up routine
*/
-#ifdef MODULE
-static void __exit rtc_from4_cleanup (void)
+static void __exit rtc_from4_cleanup(void)
{
/* Release resource, unregister partitions */
nand_release(rtc_from4_mtd);
/* Free the MTD device structure */
- kfree (rtc_from4_mtd);
+ kfree(rtc_from4_mtd);
#ifdef RTC_FROM4_HWECC
/* Free the reed solomon resources */
@@ -674,10 +650,9 @@ static void __exit rtc_from4_cleanup (void)
}
#endif
}
+
module_exit(rtc_from4_cleanup);
-#endif
MODULE_LICENSE("GPL");
MODULE_AUTHOR("d.marlin <dmarlin@redhat.com");
MODULE_DESCRIPTION("Board-specific glue layer for AG-AND flash on Renesas FROM_BOARD4");
-
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 5b55599739f..2c262fe03d8 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -18,8 +18,9 @@
* 20-Jun-2005 BJD Updated s3c2440 support, fixed timing bug
* 08-Jul-2005 BJD Fix OOPS when no platform data supplied
* 20-Oct-2005 BJD Fix timing calculation bug
+ * 14-Jan-2006 BJD Allow clock to be stopped when idle
*
- * $Id: s3c2410.c,v 1.20 2005/11/07 11:14:31 gleixner Exp $
+ * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -36,9 +37,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <config/mtd/nand/s3c2410/hwecc.h>
-#include <config/mtd/nand/s3c2410/debug.h>
-
#ifdef CONFIG_MTD_NAND_S3C2410_DEBUG
#define DEBUG
#endif
@@ -73,14 +71,20 @@ static int hardware_ecc = 1;
static int hardware_ecc = 0;
#endif
+#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
+static int clock_stop = 1;
+#else
+static const int clock_stop = 0;
+#endif
+
+
/* new oob placement block for use with hardware ecc generation
*/
-static struct nand_oobinfo nand_hw_eccoob = {
- .useecc = MTD_NANDECC_AUTOPLACE,
- .eccbytes = 3,
- .eccpos = {0, 1, 2 },
- .oobfree = { {8, 8} }
+static struct nand_ecclayout nand_hw_eccoob = {
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {{8, 8}}
};
/* controller and mtd information */
@@ -135,6 +139,11 @@ static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev)
return dev->dev.platform_data;
}
+static inline int allow_clk_stop(struct s3c2410_nand_info *info)
+{
+ return clock_stop;
+}
+
/* timing calculations */
#define NS_IN_KHZ 1000000
@@ -149,8 +158,7 @@ static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max)
pr_debug("result %d from %ld, %d\n", result, clk, wanted);
if (result > max) {
- printk("%d ns is too big for current clock rate %ld\n",
- wanted, clk);
+ printk("%d ns is too big for current clock rate %ld\n", wanted, clk);
return -1;
}
@@ -164,8 +172,7 @@ static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max)
/* controller setup */
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
- struct platform_device *pdev)
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, struct platform_device *pdev)
{
struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
unsigned long clkrate = clk_get_rate(info->clk);
@@ -177,7 +184,7 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
clkrate /= 1000; /* turn clock into kHz for ease of use */
if (plat != NULL) {
- tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);
+ tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);
twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8);
twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8);
} else {
@@ -193,19 +200,22 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
}
printk(KERN_INFO PFX "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
- tacls, to_ns(tacls, clkrate),
- twrph0, to_ns(twrph0, clkrate),
- twrph1, to_ns(twrph1, clkrate));
+ tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
if (!info->is_s3c2440) {
- cfg = S3C2410_NFCONF_EN;
- cfg |= S3C2410_NFCONF_TACLS(tacls-1);
- cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);
- cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);
+ cfg = S3C2410_NFCONF_EN;
+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
} else {
- cfg = S3C2440_NFCONF_TACLS(tacls-1);
- cfg |= S3C2440_NFCONF_TWRPH0(twrph0-1);
- cfg |= S3C2440_NFCONF_TWRPH1(twrph1-1);
+ cfg = S3C2440_NFCONF_TACLS(tacls - 1);
+ cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+ cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+
+ /* enable the controller and de-assert nFCE */
+
+ writel(S3C2440_NFCONT_ENABLE | S3C2440_NFCONT_ENABLE,
+ info->regs + S3C2440_NFCONT);
}
pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);
@@ -229,7 +239,10 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
info = nmtd->info;
bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE;
- reg = info->regs+((info->is_s3c2440) ? S3C2440_NFCONT:S3C2410_NFCONF);
+ reg = info->regs + ((info->is_s3c2440) ? S3C2440_NFCONT : S3C2410_NFCONF);
+
+ if (chip != -1 && allow_clk_stop(info))
+ clk_enable(info->clk);
cur = readl(reg);
@@ -243,77 +256,51 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
if (info->platform != NULL) {
if (info->platform->select_chip != NULL)
- (info->platform->select_chip)(nmtd->set, chip);
+ (info->platform->select_chip) (nmtd->set, chip);
}
cur &= ~bit;
}
writel(cur, reg);
+
+ if (chip == -1 && allow_clk_stop(info))
+ clk_disable(info->clk);
}
-/* command and control functions
- *
- * Note, these all use tglx's method of changing the IO_ADDR_W field
- * to make the code simpler, and use the nand layer's code to issue the
- * command and address sequences via the proper IO ports.
+/* s3c2410_nand_hwcontrol
*
+ * Issue command and address cycles to the chip
*/
-static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- struct nand_chip *chip = mtd->priv;
-
- switch (cmd) {
- case NAND_CTL_SETNCE:
- case NAND_CTL_CLRNCE:
- printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);
- break;
-
- case NAND_CTL_SETCLE:
- chip->IO_ADDR_W = info->regs + S3C2410_NFCMD;
- break;
-
- case NAND_CTL_SETALE:
- chip->IO_ADDR_W = info->regs + S3C2410_NFADDR;
- break;
-
- /* NAND_CTL_CLRCLE: */
- /* NAND_CTL_CLRALE: */
- default:
- chip->IO_ADDR_W = info->regs + S3C2410_NFDATA;
- break;
- }
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, info->regs + S3C2410_NFCMD);
+ else
+ writeb(cmd, info->regs + S3C2410_NFADDR);
}
/* command and control functions */
-static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- struct nand_chip *chip = mtd->priv;
-
- switch (cmd) {
- case NAND_CTL_SETNCE:
- case NAND_CTL_CLRNCE:
- printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);
- break;
-
- case NAND_CTL_SETCLE:
- chip->IO_ADDR_W = info->regs + S3C2440_NFCMD;
- break;
-
- case NAND_CTL_SETALE:
- chip->IO_ADDR_W = info->regs + S3C2440_NFADDR;
- break;
-
- /* NAND_CTL_CLRCLE: */
- /* NAND_CTL_CLRALE: */
- default:
- chip->IO_ADDR_W = info->regs + S3C2440_NFDATA;
- break;
- }
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, info->regs + S3C2440_NFCMD);
+ else
+ writeb(cmd, info->regs + S3C2440_NFADDR);
}
/* s3c2410_nand_devready()
@@ -330,22 +317,16 @@ static int s3c2410_nand_devready(struct mtd_info *mtd)
return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
}
-
/* ECC handling functions */
-static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
{
- pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n",
- mtd, dat, read_ecc, calc_ecc);
+ pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc);
pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",
- read_ecc[0], read_ecc[1], read_ecc[2],
- calc_ecc[0], calc_ecc[1], calc_ecc[2]);
+ read_ecc[0], read_ecc[1], read_ecc[2], calc_ecc[0], calc_ecc[1], calc_ecc[2]);
- if (read_ecc[0] == calc_ecc[0] &&
- read_ecc[1] == calc_ecc[1] &&
- read_ecc[2] == calc_ecc[2])
+ if (read_ecc[0] == calc_ecc[0] && read_ecc[1] == calc_ecc[1] && read_ecc[2] == calc_ecc[2])
return 0;
/* we curently have no method for correcting the error */
@@ -378,8 +359,7 @@ static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT);
}
-static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
- const u_char *dat, u_char *ecc_code)
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -387,15 +367,12 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd,
ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
- pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n",
- ecc_code[0], ecc_code[1], ecc_code[2]);
+ pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
}
-
-static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd,
- const u_char *dat, u_char *ecc_code)
+static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
unsigned long ecc = readl(info->regs + S3C2440_NFMECC0);
@@ -404,13 +381,11 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd,
ecc_code[1] = ecc >> 8;
ecc_code[2] = ecc >> 16;
- pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n",
- ecc_code[0], ecc_code[1], ecc_code[2]);
+ pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
}
-
/* over-ride the standard functions for a little more speed. We can
* use read/write block to move the data buffers to/from the controller
*/
@@ -421,8 +396,7 @@ static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
readsb(this->IO_ADDR_R, buf, len);
}
-static void s3c2410_nand_write_buf(struct mtd_info *mtd,
- const u_char *buf, int len)
+static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
writesb(this->IO_ADDR_W, buf, len);
@@ -459,7 +433,8 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
/* free the common resources */
if (info->clk != NULL && !IS_ERR(info->clk)) {
- clk_disable(info->clk);
+ if (!allow_clk_stop(info))
+ clk_disable(info->clk);
clk_put(info->clk);
}
@@ -488,9 +463,7 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
return add_mtd_device(&mtd->mtd);
if (set->nr_partitions > 0 && set->partitions != NULL) {
- return add_mtd_partitions(&mtd->mtd,
- set->partitions,
- set->nr_partitions);
+ return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
}
return add_mtd_device(&mtd->mtd);
@@ -517,7 +490,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
chip->IO_ADDR_R = info->regs + S3C2410_NFDATA;
chip->IO_ADDR_W = info->regs + S3C2410_NFDATA;
- chip->hwcontrol = s3c2410_nand_hwcontrol;
+ chip->cmd_ctrl = s3c2410_nand_hwcontrol;
chip->dev_ready = s3c2410_nand_devready;
chip->write_buf = s3c2410_nand_write_buf;
chip->read_buf = s3c2410_nand_read_buf;
@@ -530,26 +503,29 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
if (info->is_s3c2440) {
chip->IO_ADDR_R = info->regs + S3C2440_NFDATA;
chip->IO_ADDR_W = info->regs + S3C2440_NFDATA;
- chip->hwcontrol = s3c2440_nand_hwcontrol;
+ chip->cmd_ctrl = s3c2440_nand_hwcontrol;
}
nmtd->info = info;
nmtd->mtd.priv = chip;
+ nmtd->mtd.owner = THIS_MODULE;
nmtd->set = set;
if (hardware_ecc) {
- chip->correct_data = s3c2410_nand_correct_data;
- chip->enable_hwecc = s3c2410_nand_enable_hwecc;
- chip->calculate_ecc = s3c2410_nand_calculate_ecc;
- chip->eccmode = NAND_ECC_HW3_512;
- chip->autooob = &nand_hw_eccoob;
+ chip->ecc.correct = s3c2410_nand_correct_data;
+ chip->ecc.hwctl = s3c2410_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 3;
+ chip->ecc.layout = &nand_hw_eccoob;
if (info->is_s3c2440) {
- chip->enable_hwecc = s3c2440_nand_enable_hwecc;
- chip->calculate_ecc = s3c2440_nand_calculate_ecc;
+ chip->ecc.hwctl = s3c2440_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2440_nand_calculate_ecc;
}
} else {
- chip->eccmode = NAND_ECC_SOFT;
+ chip->ecc.mode = NAND_ECC_SOFT;
}
}
@@ -654,13 +630,11 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
nmtd = info->mtds;
for (setno = 0; setno < nr_sets; setno++, nmtd++) {
- pr_debug("initialising set %d (%p, info %p)\n",
- setno, nmtd, info);
+ pr_debug("initialising set %d (%p, info %p)\n", setno, nmtd, info);
s3c2410_nand_init_chip(info, nmtd, sets);
- nmtd->scan_res = nand_scan(&nmtd->mtd,
- (sets) ? sets->nr_chips : 1);
+ nmtd->scan_res = nand_scan(&nmtd->mtd, (sets) ? sets->nr_chips : 1);
if (nmtd->scan_res == 0) {
s3c2410_nand_add_partition(info, nmtd, sets);
@@ -670,6 +644,11 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
sets++;
}
+ if (allow_clk_stop(info)) {
+ dev_info(&pdev->dev, "clock idle support enabled\n");
+ clk_disable(info->clk);
+ }
+
pr_debug("initialised ok\n");
return 0;
@@ -681,6 +660,41 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
return err;
}
+/* PM Support */
+#ifdef CONFIG_PM
+
+static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
+{
+ struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ if (!allow_clk_stop(info))
+ clk_disable(info->clk);
+ }
+
+ return 0;
+}
+
+static int s3c24xx_nand_resume(struct platform_device *dev)
+{
+ struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ clk_enable(info->clk);
+ s3c2410_nand_inithw(info, dev);
+
+ if (allow_clk_stop(info))
+ clk_disable(info->clk);
+ }
+
+ return 0;
+}
+
+#else
+#define s3c24xx_nand_suspend NULL
+#define s3c24xx_nand_resume NULL
+#endif
+
/* driver device registration */
static int s3c2410_nand_probe(struct platform_device *dev)
@@ -696,6 +710,8 @@ static int s3c2440_nand_probe(struct platform_device *dev)
static struct platform_driver s3c2410_nand_driver = {
.probe = s3c2410_nand_probe,
.remove = s3c2410_nand_remove,
+ .suspend = s3c24xx_nand_suspend,
+ .resume = s3c24xx_nand_resume,
.driver = {
.name = "s3c2410-nand",
.owner = THIS_MODULE,
@@ -705,6 +721,8 @@ static struct platform_driver s3c2410_nand_driver = {
static struct platform_driver s3c2440_nand_driver = {
.probe = s3c2440_nand_probe,
.remove = s3c2410_nand_remove,
+ .suspend = s3c24xx_nand_suspend,
+ .resume = s3c24xx_nand_resume,
.driver = {
.name = "s3c2440-nand",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 1924a4f137c..21743658d15 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -46,7 +46,6 @@ static int sharpsl_phys_base = 0x0C000000;
#define FLCLE (1 << 1)
#define FLCE0 (1 << 0)
-
/*
* MTD structure for SharpSL
*/
@@ -60,50 +59,44 @@ static struct mtd_info *sharpsl_mtd = NULL;
static int nr_partitions;
static struct mtd_partition sharpsl_nand_default_partition_info[] = {
{
- .name = "System Area",
- .offset = 0,
- .size = 7 * 1024 * 1024,
- },
+ .name = "System Area",
+ .offset = 0,
+ .size = 7 * 1024 * 1024,
+ },
{
- .name = "Root Filesystem",
- .offset = 7 * 1024 * 1024,
- .size = 30 * 1024 * 1024,
- },
+ .name = "Root Filesystem",
+ .offset = 7 * 1024 * 1024,
+ .size = 30 * 1024 * 1024,
+ },
{
- .name = "Home Filesystem",
- .offset = MTDPART_OFS_APPEND ,
- .size = MTDPART_SIZ_FULL ,
- },
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
};
/*
* hardware specific access to control-lines
+ * ctrl:
+ * NAND_CNE: bit 0 -> bit 0 & 4
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 2
+ *
*/
-static void
-sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
+static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
- switch (cmd) {
- case NAND_CTL_SETCLE:
- writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
- break;
- case NAND_CTL_CLRCLE:
- writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL);
- break;
-
- case NAND_CTL_SETALE:
- writeb(readb(FLASHCTL) | FLALE, FLASHCTL);
- break;
- case NAND_CTL_CLRALE:
- writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
- break;
-
- case NAND_CTL_SETNCE:
- writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
- break;
- case NAND_CTL_CLRNCE:
- writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
- break;
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits = ctrl & 0x07;
+
+ bits |= (ctrl & 0x01) << 4;
+ writeb((readb(FLASHCTL) & 0x17) | bits, FLASHCTL);
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
@@ -122,31 +115,26 @@ static struct nand_bbt_descr sharpsl_akita_bbt = {
.pattern = scan_ff_pattern
};
-static struct nand_oobinfo akita_oobinfo = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout akita_oobinfo = {
.eccbytes = 24,
.eccpos = {
- 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
- 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
- .oobfree = { {0x08, 0x09} }
+ 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+ 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+ .oobfree = {{0x08, 0x09}}
};
-static int
-sharpsl_nand_dev_ready(struct mtd_info* mtd)
+static int sharpsl_nand_dev_ready(struct mtd_info *mtd)
{
return !((readb(FLASHCTL) & FLRYBY) == 0);
}
-static void
-sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode)
+static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
- writeb(0 ,ECCCLRR);
+ writeb(0, ECCCLRR);
}
-static int
-sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
- u_char* ecc_code)
+static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code)
{
ecc_code[0] = ~readb(ECCLPUB);
ecc_code[1] = ~readb(ECCLPLB);
@@ -154,47 +142,44 @@ sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat,
return readb(ECCCNTR) != 0;
}
-
#ifdef CONFIG_MTD_PARTITIONS
const char *part_probes[] = { "cmdlinepart", NULL };
#endif
-
/*
* Main initialization routine
*/
-int __init
-sharpsl_nand_init(void)
+static int __init sharpsl_nand_init(void)
{
struct nand_chip *this;
- struct mtd_partition* sharpsl_partition_info;
+ struct mtd_partition *sharpsl_partition_info;
int err = 0;
/* Allocate memory for MTD device structure and private data */
- sharpsl_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
- GFP_KERNEL);
+ sharpsl_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!sharpsl_mtd) {
- printk ("Unable to allocate SharpSL NAND MTD device structure.\n");
+ printk("Unable to allocate SharpSL NAND MTD device structure.\n");
return -ENOMEM;
}
/* map physical adress */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
- if(!sharpsl_io_base){
+ if (!sharpsl_io_base) {
printk("ioremap to access Sharp SL NAND chip failed\n");
kfree(sharpsl_mtd);
return -EIO;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&sharpsl_mtd[1]);
+ this = (struct nand_chip *)(&sharpsl_mtd[1]);
/* Initialize structures */
- memset((char *) sharpsl_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(sharpsl_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
sharpsl_mtd->priv = this;
+ sharpsl_mtd->owner = THIS_MODULE;
/*
* PXA initialize
@@ -205,23 +190,25 @@ sharpsl_nand_init(void)
this->IO_ADDR_R = FLASHIO;
this->IO_ADDR_W = FLASHIO;
/* Set address of hardware control function */
- this->hwcontrol = sharpsl_nand_hwcontrol;
+ this->cmd_ctrl = sharpsl_nand_hwcontrol;
this->dev_ready = sharpsl_nand_dev_ready;
/* 15 us command delay time */
this->chip_delay = 15;
/* set eccmode using hardware ECC */
- this->eccmode = NAND_ECC_HW3_256;
+ this->ecc.mode = NAND_ECC_HW;
+ this->ecc.size = 256;
+ this->ecc.bytes = 3;
this->badblock_pattern = &sharpsl_bbt;
if (machine_is_akita() || machine_is_borzoi()) {
this->badblock_pattern = &sharpsl_akita_bbt;
- this->autooob = &akita_oobinfo;
+ this->ecc.layout = &akita_oobinfo;
}
- this->enable_hwecc = sharpsl_nand_enable_hwecc;
- this->calculate_ecc = sharpsl_nand_calculate_ecc;
- this->correct_data = nand_correct_data;
+ this->ecc.hwctl = sharpsl_nand_enable_hwecc;
+ this->ecc.calculate = sharpsl_nand_calculate_ecc;
+ this->ecc.correct = nand_correct_data;
/* Scan to find existence of the device */
- err=nand_scan(sharpsl_mtd,1);
+ err = nand_scan(sharpsl_mtd, 1);
if (err) {
iounmap(sharpsl_io_base);
kfree(sharpsl_mtd);
@@ -230,24 +217,23 @@ sharpsl_nand_init(void)
/* Register the partitions */
sharpsl_mtd->name = "sharpsl-nand";
- nr_partitions = parse_mtd_partitions(sharpsl_mtd, part_probes,
- &sharpsl_partition_info, 0);
+ nr_partitions = parse_mtd_partitions(sharpsl_mtd, part_probes, &sharpsl_partition_info, 0);
if (nr_partitions <= 0) {
nr_partitions = DEFAULT_NUM_PARTITIONS;
sharpsl_partition_info = sharpsl_nand_default_partition_info;
if (machine_is_poodle()) {
- sharpsl_partition_info[1].size=30 * 1024 * 1024;
+ sharpsl_partition_info[1].size = 22 * 1024 * 1024;
} else if (machine_is_corgi() || machine_is_shepherd()) {
- sharpsl_partition_info[1].size=25 * 1024 * 1024;
+ sharpsl_partition_info[1].size = 25 * 1024 * 1024;
} else if (machine_is_husky()) {
- sharpsl_partition_info[1].size=53 * 1024 * 1024;
+ sharpsl_partition_info[1].size = 53 * 1024 * 1024;
} else if (machine_is_spitz()) {
- sharpsl_partition_info[1].size=5 * 1024 * 1024;
+ sharpsl_partition_info[1].size = 5 * 1024 * 1024;
} else if (machine_is_akita()) {
- sharpsl_partition_info[1].size=58 * 1024 * 1024;
+ sharpsl_partition_info[1].size = 58 * 1024 * 1024;
} else if (machine_is_borzoi()) {
- sharpsl_partition_info[1].size=32 * 1024 * 1024;
+ sharpsl_partition_info[1].size = 32 * 1024 * 1024;
}
}
@@ -261,15 +247,15 @@ sharpsl_nand_init(void)
/* Return happy */
return 0;
}
+
module_init(sharpsl_nand_init);
/*
* Clean up routine
*/
-#ifdef MODULE
static void __exit sharpsl_nand_cleanup(void)
{
- struct nand_chip *this = (struct nand_chip *) &sharpsl_mtd[1];
+ struct nand_chip *this = (struct nand_chip *)&sharpsl_mtd[1];
/* Release resources, unregister device */
nand_release(sharpsl_mtd);
@@ -279,8 +265,8 @@ static void __exit sharpsl_nand_cleanup(void)
/* Free the MTD device structure */
kfree(sharpsl_mtd);
}
+
module_exit(sharpsl_nand_cleanup);
-#endif
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index 9cf1ce718ec..1f6d429b158 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -39,16 +39,16 @@ static struct mtd_info *spia_mtd = NULL;
*/
#define SPIA_IO_BASE 0xd0000000 /* Start of EP7212 IO address space */
#define SPIA_FIO_BASE 0xf0000000 /* Address where flash is mapped */
-#define SPIA_PEDR 0x0080 /*
- * IO offset to Port E data register
- * where the CLE, ALE and NCE pins
- * are wired to.
- */
-#define SPIA_PEDDR 0x00c0 /*
- * IO offset to Port E data direction
- * register so we can control the IO
- * lines.
- */
+#define SPIA_PEDR 0x0080 /*
+ * IO offset to Port E data register
+ * where the CLE, ALE and NCE pins
+ * are wired to.
+ */
+#define SPIA_PEDDR 0x00c0 /*
+ * IO offset to Port E data direction
+ * register so we can control the IO
+ * lines.
+ */
/*
* Module stuff
@@ -69,79 +69,84 @@ module_param(spia_peddr, int, 0);
*/
static const struct mtd_partition partition_info[] = {
{
- .name = "SPIA flash partition 1",
- .offset = 0,
- .size = 2*1024*1024
- },
+ .name = "SPIA flash partition 1",
+ .offset = 0,
+ .size = 2 * 1024 * 1024},
{
- .name = "SPIA flash partition 2",
- .offset = 2*1024*1024,
- .size = 6*1024*1024
- }
+ .name = "SPIA flash partition 2",
+ .offset = 2 * 1024 * 1024,
+ .size = 6 * 1024 * 1024}
};
-#define NUM_PARTITIONS 2
+#define NUM_PARTITIONS 2
/*
* hardware specific access to control-lines
-*/
-static void spia_hwcontrol(struct mtd_info *mtd, int cmd){
-
- switch(cmd){
+ *
+ * ctrl:
+ * NAND_CNE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 0
+ * NAND_ALE: bit 2 -> bit 1
+ */
+static void spia_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *chip = mtd->priv;
- case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x01; break;
- case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ void __iomem *addr = spia_io_base + spia_pedr;
+ unsigned char bits;
- case NAND_CTL_SETALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x02; break;
- case NAND_CTL_CLRALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x02; break;
+ bits = (ctrl & NAND_CNE) << 2;
+ bits |= (ctrl & NAND_CLE | NAND_ALE) >> 1;
+ writeb((readb(addr) & ~0x7) | bits, addr);
+ }
- case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break;
- case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x04; break;
- }
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
/*
* Main initialization routine
*/
-int __init spia_init (void)
+static int __init spia_init(void)
{
struct nand_chip *this;
/* Allocate memory for MTD device structure and private data */
- spia_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
- GFP_KERNEL);
+ spia_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!spia_mtd) {
- printk ("Unable to allocate SPIA NAND MTD device structure.\n");
+ printk("Unable to allocate SPIA NAND MTD device structure.\n");
return -ENOMEM;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&spia_mtd[1]);
+ this = (struct nand_chip *)(&spia_mtd[1]);
/* Initialize structures */
- memset((char *) spia_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(spia_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
spia_mtd->priv = this;
+ spia_mtd->owner = THIS_MODULE;
/*
* Set GPIO Port E control register so that the pins are configured
* to be outputs for controlling the NAND flash.
*/
- (*(volatile unsigned char *) (spia_io_base + spia_peddr)) = 0x07;
+ (*(volatile unsigned char *)(spia_io_base + spia_peddr)) = 0x07;
/* Set address of NAND IO lines */
- this->IO_ADDR_R = (void __iomem *) spia_fio_base;
- this->IO_ADDR_W = (void __iomem *) spia_fio_base;
+ this->IO_ADDR_R = (void __iomem *)spia_fio_base;
+ this->IO_ADDR_W = (void __iomem *)spia_fio_base;
/* Set address of hardware control function */
- this->hwcontrol = spia_hwcontrol;
+ this->cmd_ctrl = spia_hwcontrol;
/* 15 us command delay time */
this->chip_delay = 15;
/* Scan to find existence of the device */
- if (nand_scan (spia_mtd, 1)) {
- kfree (spia_mtd);
+ if (nand_scan(spia_mtd, 1)) {
+ kfree(spia_mtd);
return -ENXIO;
}
@@ -151,22 +156,22 @@ int __init spia_init (void)
/* Return happy */
return 0;
}
+
module_init(spia_init);
/*
* Clean up routine
*/
-#ifdef MODULE
-static void __exit spia_cleanup (void)
+static void __exit spia_cleanup(void)
{
/* Release resources, unregister device */
- nand_release (spia_mtd);
+ nand_release(spia_mtd);
/* Free the MTD device structure */
- kfree (spia_mtd);
+ kfree(spia_mtd);
}
+
module_exit(spia_cleanup);
-#endif
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com");
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
index 7609c43cb3e..f9e2d4a0ab8 100644
--- a/drivers/mtd/nand/toto.c
+++ b/drivers/mtd/nand/toto.c
@@ -32,6 +32,8 @@
#include <asm/arch-omap1510/hardware.h>
#include <asm/arch/gpio.h>
+#define CONFIG_NAND_WORKAROUND 1
+
/*
* MTD structure for TOTO board
*/
@@ -39,25 +41,6 @@ static struct mtd_info *toto_mtd = NULL;
static unsigned long toto_io_base = OMAP_FLASH_1_BASE;
-#define CONFIG_NAND_WORKAROUND 1
-
-#define NAND_NCE 0x4000
-#define NAND_CLE 0x1000
-#define NAND_ALE 0x0002
-#define NAND_MASK (NAND_CLE | NAND_ALE | NAND_NCE)
-
-#define T_NAND_CTL_CLRALE(iob) gpiosetout(NAND_ALE, 0)
-#define T_NAND_CTL_SETALE(iob) gpiosetout(NAND_ALE, NAND_ALE)
-#ifdef CONFIG_NAND_WORKAROUND /* "some" dev boards busted, blue wired to rts2 :( */
-#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0); rts2setout(2, 2)
-#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE); rts2setout(2, 0)
-#else
-#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0)
-#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE)
-#endif
-#define T_NAND_CTL_SETNCE(iob) gpiosetout(NAND_NCE, 0)
-#define T_NAND_CTL_CLRNCE(iob) gpiosetout(NAND_NCE, NAND_NCE)
-
/*
* Define partitions for flash devices
*/
@@ -91,91 +74,110 @@ static struct mtd_partition partition_info32M[] = {
#define NUM_PARTITIONS32M 3
#define NUM_PARTITIONS64M 4
+
/*
* hardware specific access to control-lines
-*/
-
-static void toto_hwcontrol(struct mtd_info *mtd, int cmd)
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 14 (0x4000)
+ * NAND_CLE: bit 1 -> bit 12 (0x1000)
+ * NAND_ALE: bit 2 -> bit 1 (0x0002)
+ */
+static void toto_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned long bits;
- udelay(1); /* hopefully enough time for tc make proceding write to clear */
- switch(cmd){
+ /* hopefully enough time for tc make proceding write to clear */
+ udelay(1);
- case NAND_CTL_SETCLE: T_NAND_CTL_SETCLE(cmd); break;
- case NAND_CTL_CLRCLE: T_NAND_CTL_CLRCLE(cmd); break;
+ bits = (~ctrl & NAND_NCE) << 14;
+ bits |= (ctrl & NAND_CLE) << 12;
+ bits |= (ctrl & NAND_ALE) >> 1;
- case NAND_CTL_SETALE: T_NAND_CTL_SETALE(cmd); break;
- case NAND_CTL_CLRALE: T_NAND_CTL_CLRALE(cmd); break;
+#warning Wild guess as gpiosetout() is nowhere defined in the kernel source - tglx
+ gpiosetout(0x5002, bits);
- case NAND_CTL_SETNCE: T_NAND_CTL_SETNCE(cmd); break;
- case NAND_CTL_CLRNCE: T_NAND_CTL_CLRNCE(cmd); break;
+#ifdef CONFIG_NAND_WORKAROUND
+ /* "some" dev boards busted, blue wired to rts2 :( */
+ rts2setout(2, (ctrl & NAND_CLE) << 1);
+#endif
+ /* allow time to ensure gpio state to over take memory write */
+ udelay(1);
}
- udelay(1); /* allow time to ensure gpio state to over take memory write */
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
/*
* Main initialization routine
*/
-int __init toto_init (void)
+static int __init toto_init(void)
{
struct nand_chip *this;
int err = 0;
/* Allocate memory for MTD device structure and private data */
- toto_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
- GFP_KERNEL);
+ toto_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!toto_mtd) {
- printk (KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n");
+ printk(KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n");
err = -ENOMEM;
goto out;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&toto_mtd[1]);
+ this = (struct nand_chip *)(&toto_mtd[1]);
/* Initialize structures */
- memset((char *) toto_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(toto_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
toto_mtd->priv = this;
+ toto_mtd->owner = THIS_MODULE;
/* Set address of NAND IO lines */
this->IO_ADDR_R = toto_io_base;
this->IO_ADDR_W = toto_io_base;
- this->hwcontrol = toto_hwcontrol;
+ this->cmd_ctrl = toto_hwcontrol;
this->dev_ready = NULL;
/* 25 us command delay time */
this->chip_delay = 30;
- this->eccmode = NAND_ECC_SOFT;
+ this->ecc.mode = NAND_ECC_SOFT;
- /* Scan to find existance of the device */
- if (nand_scan (toto_mtd, 1)) {
+ /* Scan to find existance of the device */
+ if (nand_scan(toto_mtd, 1)) {
err = -ENXIO;
goto out_mtd;
}
/* Register the partitions */
- switch(toto_mtd->size){
- case SZ_64M: add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M); break;
- case SZ_32M: add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M); break;
- default: {
- printk (KERN_WARNING "Unsupported Nand device\n");
+ switch (toto_mtd->size) {
+ case SZ_64M:
+ add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M);
+ break;
+ case SZ_32M:
+ add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M);
+ break;
+ default:{
+ printk(KERN_WARNING "Unsupported Nand device\n");
err = -ENXIO;
goto out_buf;
}
}
- gpioreserve(NAND_MASK); /* claim our gpios */
- archflashwp(0,0); /* open up flash for writing */
+ gpioreserve(NAND_MASK); /* claim our gpios */
+ archflashwp(0, 0); /* open up flash for writing */
goto out;
-out_buf:
- kfree (this->data_buf);
-out_mtd:
- kfree (toto_mtd);
-out:
+ out_mtd:
+ kfree(toto_mtd);
+ out:
return err;
}
@@ -184,20 +186,21 @@ module_init(toto_init);
/*
* Clean up routine
*/
-static void __exit toto_cleanup (void)
+static void __exit toto_cleanup(void)
{
/* Release resources, unregister device */
- nand_release (toto_mtd);
+ nand_release(toto_mtd);
/* Free the MTD device structure */
- kfree (toto_mtd);
+ kfree(toto_mtd);
/* stop flash writes */
- archflashwp(0,1);
+ archflashwp(0, 1);
/* release gpios to system */
- gpiorelease(NAND_MASK);
+ gpiorelease(NAND_MASK);
}
+
module_exit(toto_cleanup);
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
new file mode 100644
index 00000000000..a0b4b1edcb0
--- /dev/null
+++ b/drivers/mtd/nand/ts7250.c
@@ -0,0 +1,206 @@
+/*
+ * drivers/mtd/nand/ts7250.c
+ *
+ * Copyright (C) 2004 Technologic Systems (support@embeddedARM.com)
+ *
+ * Derived from drivers/mtd/nand/edb7312.c
+ * Copyright (C) 2004 Marius Gröger (mag@sysgo.de)
+ *
+ * Derived from drivers/mtd/nand/autcpu12.c
+ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * $Id: ts7250.c,v 1.4 2004/12/30 22:02:07 joff Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash device found on the
+ * TS-7250 board which utilizes a Samsung 32 Mbyte part.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/sizes.h>
+#include <asm/mach-types.h>
+
+/*
+ * MTD structure for TS7250 board
+ */
+static struct mtd_info *ts7250_mtd = NULL;
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+#define NUM_PARTITIONS 3
+
+/*
+ * Define static partitions for flash device
+ */
+static struct mtd_partition partition_info32[] = {
+ {
+ .name = "TS-BOOTROM",
+ .offset = 0x00000000,
+ .size = 0x00004000,
+ }, {
+ .name = "Linux",
+ .offset = 0x00004000,
+ .size = 0x01d00000,
+ }, {
+ .name = "RedBoot",
+ .offset = 0x01d04000,
+ .size = 0x002fc000,
+ },
+};
+
+/*
+ * Define static partitions for flash device
+ */
+static struct mtd_partition partition_info128[] = {
+ {
+ .name = "TS-BOOTROM",
+ .offset = 0x00000000,
+ .size = 0x00004000,
+ }, {
+ .name = "Linux",
+ .offset = 0x00004000,
+ .size = 0x07d00000,
+ }, {
+ .name = "RedBoot",
+ .offset = 0x07d04000,
+ .size = 0x002fc000,
+ },
+};
+#endif
+
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 0
+ */
+static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE;
+ unsigned char bits;
+
+ bits = (ctrl & NAND_CNE) << 2;
+ bits |= ctrl & NAND_CLE;
+ bits |= (ctrl & NAND_ALE) >> 2;
+
+ __raw_writeb((__raw_readb(addr) & ~0x7) | bits, addr);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+
+/*
+ * read device ready pin
+ */
+static int ts7250_device_ready(struct mtd_info *mtd)
+{
+ return __raw_readb(TS72XX_NAND_BUSY_VIRT_BASE) & 0x20;
+}
+
+/*
+ * Main initialization routine
+ */
+static int __init ts7250_init(void)
+{
+ struct nand_chip *this;
+ const char *part_type = 0;
+ int mtd_parts_nb = 0;
+ struct mtd_partition *mtd_parts = 0;
+
+ if (!machine_is_ts72xx() || board_is_ts7200())
+ return -ENXIO;
+
+ /* Allocate memory for MTD device structure and private data */
+ ts7250_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
+ if (!ts7250_mtd) {
+ printk("Unable to allocate TS7250 NAND MTD device structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *)(&ts7250_mtd[1]);
+
+ /* Initialize structures */
+ memset(ts7250_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
+
+ /* Link the private data with the MTD structure */
+ ts7250_mtd->priv = this;
+ ts7250_mtd->owner = THIS_MODULE;
+
+ /* insert callbacks */
+ this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE;
+ this->IO_ADDR_W = (void *)TS72XX_NAND_DATA_VIRT_BASE;
+ this->cmd_ctrl = ts7250_hwcontrol;
+ this->dev_ready = ts7250_device_ready;
+ this->chip_delay = 15;
+ this->ecc.mode = NAND_ECC_SOFT;
+
+ printk("Searching for NAND flash...\n");
+ /* Scan to find existence of the device */
+ if (nand_scan(ts7250_mtd, 1)) {
+ kfree(ts7250_mtd);
+ return -ENXIO;
+ }
+#ifdef CONFIG_MTD_PARTITIONS
+ ts7250_mtd->name = "ts7250-nand";
+ mtd_parts_nb = parse_mtd_partitions(ts7250_mtd, part_probes, &mtd_parts, 0);
+ if (mtd_parts_nb > 0)
+ part_type = "command line";
+ else
+ mtd_parts_nb = 0;
+#endif
+ if (mtd_parts_nb == 0) {
+ mtd_parts = partition_info32;
+ if (ts7250_mtd->size >= (128 * 0x100000))
+ mtd_parts = partition_info128;
+ mtd_parts_nb = NUM_PARTITIONS;
+ part_type = "static";
+ }
+
+ /* Register the partitions */
+ printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+ add_mtd_partitions(ts7250_mtd, mtd_parts, mtd_parts_nb);
+
+ /* Return happy */
+ return 0;
+}
+
+module_init(ts7250_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit ts7250_cleanup(void)
+{
+ /* Unregister the device */
+ del_mtd_device(ts7250_mtd);
+
+ /* Free the MTD device structure */
+ kfree(ts7250_mtd);
+}
+
+module_exit(ts7250_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jesse Off <joff@embeddedARM.com>");
+MODULE_DESCRIPTION("MTD map driver for Technologic Systems TS-7250 board");
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index d7cd5fa16ba..dc7573501d8 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -70,8 +70,6 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
nftl->mbd.devnum = -1;
nftl->mbd.blksize = 512;
nftl->mbd.tr = tr;
- memcpy(&nftl->oobinfo, &mtd->oobinfo, sizeof(struct nand_oobinfo));
- nftl->oobinfo.useecc = MTD_NANDECC_PLACEONLY;
if (NFTL_mount(nftl) < 0) {
printk(KERN_WARNING "NFTL: could not mount device\n");
@@ -136,6 +134,69 @@ static void nftl_remove_dev(struct mtd_blktrans_dev *dev)
kfree(nftl);
}
+/*
+ * Read oob data from flash
+ */
+int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf)
+{
+ struct mtd_oob_ops ops;
+ int res;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooblen = len;
+ ops.oobbuf = buf;
+ ops.datbuf = NULL;
+ ops.len = len;
+
+ res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ *retlen = ops.retlen;
+ return res;
+}
+
+/*
+ * Write oob data to flash
+ */
+int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf)
+{
+ struct mtd_oob_ops ops;
+ int res;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooblen = len;
+ ops.oobbuf = buf;
+ ops.datbuf = NULL;
+ ops.len = len;
+
+ res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ *retlen = ops.retlen;
+ return res;
+}
+
+/*
+ * Write data and oob to flash
+ */
+static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf, uint8_t *oob)
+{
+ struct mtd_oob_ops ops;
+ int res;
+
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = offs;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = oob;
+ ops.datbuf = buf;
+ ops.len = len;
+
+ res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ *retlen = ops.retlen;
+ return res;
+}
+
#ifdef CONFIG_NFTL_RW
/* Actual NFTL access routines */
@@ -185,6 +246,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate )
static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock )
{
+ struct mtd_info *mtd = nftl->mbd.mtd;
u16 BlockMap[MAX_SECTORS_PER_UNIT];
unsigned char BlockLastState[MAX_SECTORS_PER_UNIT];
unsigned char BlockFreeFound[MAX_SECTORS_PER_UNIT];
@@ -194,7 +256,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
unsigned int targetEUN;
struct nftl_oob oob;
int inplace = 1;
- size_t retlen;
+ size_t retlen;
memset(BlockMap, 0xff, sizeof(BlockMap));
memset(BlockFreeFound, 0, sizeof(BlockFreeFound));
@@ -210,21 +272,21 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
/* Scan to find the Erase Unit which holds the actual data for each
512-byte block within the Chain.
*/
- silly = MAX_LOOPS;
+ silly = MAX_LOOPS;
targetEUN = BLOCK_NIL;
while (thisEUN <= nftl->lastEUN ) {
- unsigned int status, foldmark;
+ unsigned int status, foldmark;
targetEUN = thisEUN;
for (block = 0; block < nftl->EraseSize / 512; block ++) {
- MTD_READOOB(nftl->mbd.mtd,
- (thisEUN * nftl->EraseSize) + (block * 512),
- 16 , &retlen, (char *)&oob);
+ nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) +
+ (block * 512), 16 , &retlen,
+ (char *)&oob);
if (block == 2) {
- foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
- if (foldmark == FOLD_MARK_IN_PROGRESS) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "Write Inhibited on EUN %d\n", thisEUN);
+ foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
+ if (foldmark == FOLD_MARK_IN_PROGRESS) {
+ DEBUG(MTD_DEBUG_LEVEL1,
+ "Write Inhibited on EUN %d\n", thisEUN);
inplace = 0;
} else {
/* There's no other reason not to do inplace,
@@ -233,7 +295,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
inplace = 1;
}
}
- status = oob.b.Status | oob.b.Status1;
+ status = oob.b.Status | oob.b.Status1;
BlockLastState[block] = status;
switch(status) {
@@ -328,15 +390,15 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
return BLOCK_NIL;
}
} else {
- /* We put a fold mark in the chain we are folding only if
- we fold in place to help the mount check code. If we do
- not fold in place, it is possible to find the valid
- chain by selecting the longer one */
- oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS);
- oob.u.c.unused = 0xffffffff;
- MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8,
- 8, &retlen, (char *)&oob.u);
- }
+ /* We put a fold mark in the chain we are folding only if we
+ fold in place to help the mount check code. If we do not fold in
+ place, it is possible to find the valid chain by selecting the
+ longer one */
+ oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS);
+ oob.u.c.unused = 0xffffffff;
+ nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8,
+ 8, &retlen, (char *)&oob.u);
+ }
/* OK. We now know the location of every block in the Virtual Unit Chain,
and the Erase Unit into which we are supposed to be copying.
@@ -353,33 +415,33 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
continue;
}
- /* copy only in non free block (free blocks can only
+ /* copy only in non free block (free blocks can only
happen in case of media errors or deleted blocks) */
- if (BlockMap[block] == BLOCK_NIL)
- continue;
-
- ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
- 512, &retlen, movebuf);
- if (ret < 0) {
- ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block])
- + (block * 512), 512, &retlen,
- movebuf);
- if (ret != -EIO)
- printk("Error went away on retry.\n");
- }
+ if (BlockMap[block] == BLOCK_NIL)
+ continue;
+
+ ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
+ 512, &retlen, movebuf);
+ if (ret < 0 && ret != -EUCLEAN) {
+ ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block])
+ + (block * 512), 512, &retlen,
+ movebuf);
+ if (ret != -EIO)
+ printk("Error went away on retry.\n");
+ }
memset(&oob, 0xff, sizeof(struct nftl_oob));
oob.b.Status = oob.b.Status1 = SECTOR_USED;
- MTD_WRITEECC(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + (block * 512),
- 512, &retlen, movebuf, (char *)&oob, &nftl->oobinfo);
+
+ nftl_write(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) +
+ (block * 512), 512, &retlen, movebuf, (char *)&oob);
}
- /* add the header so that it is now a valid chain */
- oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum
- = cpu_to_le16(thisVUC);
- oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff;
+ /* add the header so that it is now a valid chain */
+ oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC);
+ oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff;
- MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 8,
- 8, &retlen, (char *)&oob.u);
+ nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8,
+ 8, &retlen, (char *)&oob.u);
/* OK. We've moved the whole lot into the new block. Now we have to free the original blocks. */
@@ -396,18 +458,18 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
while (thisEUN <= nftl->lastEUN && thisEUN != targetEUN) {
unsigned int EUNtmp;
- EUNtmp = nftl->ReplUnitTable[thisEUN];
+ EUNtmp = nftl->ReplUnitTable[thisEUN];
- if (NFTL_formatblock(nftl, thisEUN) < 0) {
+ if (NFTL_formatblock(nftl, thisEUN) < 0) {
/* could not erase : mark block as reserved
*/
nftl->ReplUnitTable[thisEUN] = BLOCK_RESERVED;
- } else {
+ } else {
/* correctly erased : mark it as free */
nftl->ReplUnitTable[thisEUN] = BLOCK_FREE;
nftl->numfreeEUNs++;
- }
- thisEUN = EUNtmp;
+ }
+ thisEUN = EUNtmp;
}
/* Make this the new start of chain for thisVUC */
@@ -473,6 +535,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
{
u16 lastEUN;
u16 thisVUC = block / (nftl->EraseSize / 512);
+ struct mtd_info *mtd = nftl->mbd.mtd;
unsigned int writeEUN;
unsigned long blockofs = (block * 512) & (nftl->EraseSize -1);
size_t retlen;
@@ -489,21 +552,22 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
*/
lastEUN = BLOCK_NIL;
writeEUN = nftl->EUNtable[thisVUC];
- silly = MAX_LOOPS;
+ silly = MAX_LOOPS;
while (writeEUN <= nftl->lastEUN) {
struct nftl_bci bci;
size_t retlen;
- unsigned int status;
+ unsigned int status;
lastEUN = writeEUN;
- MTD_READOOB(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs,
- 8, &retlen, (char *)&bci);
+ nftl_read_oob(mtd,
+ (writeEUN * nftl->EraseSize) + blockofs,
+ 8, &retlen, (char *)&bci);
DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n",
block , writeEUN, le16_to_cpu(bci.Status));
- status = bci.Status | bci.Status1;
+ status = bci.Status | bci.Status1;
switch(status) {
case SECTOR_FREE:
return writeEUN;
@@ -574,10 +638,10 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
/* We've found a free block. Insert it into the chain. */
if (lastEUN != BLOCK_NIL) {
- thisVUC |= 0x8000; /* It's a replacement block */
+ thisVUC |= 0x8000; /* It's a replacement block */
} else {
- /* The first block in a new chain */
- nftl->EUNtable[thisVUC] = writeEUN;
+ /* The first block in a new chain */
+ nftl->EUNtable[thisVUC] = writeEUN;
}
/* set up the actual EUN we're writing into */
@@ -585,29 +649,29 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
nftl->ReplUnitTable[writeEUN] = BLOCK_NIL;
/* ... and on the flash itself */
- MTD_READOOB(nftl->mbd.mtd, writeEUN * nftl->EraseSize + 8, 8,
- &retlen, (char *)&oob.u);
+ nftl_read_oob(mtd, writeEUN * nftl->EraseSize + 8, 8,
+ &retlen, (char *)&oob.u);
oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC);
- MTD_WRITEOOB(nftl->mbd.mtd, writeEUN * nftl->EraseSize + 8, 8,
- &retlen, (char *)&oob.u);
+ nftl_write_oob(mtd, writeEUN * nftl->EraseSize + 8, 8,
+ &retlen, (char *)&oob.u);
- /* we link the new block to the chain only after the
+ /* we link the new block to the chain only after the
block is ready. It avoids the case where the chain
could point to a free block */
- if (lastEUN != BLOCK_NIL) {
+ if (lastEUN != BLOCK_NIL) {
/* Both in our cache... */
nftl->ReplUnitTable[lastEUN] = writeEUN;
/* ... and on the flash itself */
- MTD_READOOB(nftl->mbd.mtd, (lastEUN * nftl->EraseSize) + 8,
- 8, &retlen, (char *)&oob.u);
+ nftl_read_oob(mtd, (lastEUN * nftl->EraseSize) + 8,
+ 8, &retlen, (char *)&oob.u);
oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum
= cpu_to_le16(writeEUN);
- MTD_WRITEOOB(nftl->mbd.mtd, (lastEUN * nftl->EraseSize) + 8,
- 8, &retlen, (char *)&oob.u);
+ nftl_write_oob(mtd, (lastEUN * nftl->EraseSize) + 8,
+ 8, &retlen, (char *)&oob.u);
}
return writeEUN;
@@ -639,10 +703,9 @@ static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
memset(&oob, 0xff, sizeof(struct nftl_oob));
oob.b.Status = oob.b.Status1 = SECTOR_USED;
- MTD_WRITEECC(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs,
- 512, &retlen, (char *)buffer, (char *)&oob, &nftl->oobinfo);
- /* need to write SECTOR_USED flags since they are not written in mtd_writeecc */
+ nftl_write(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs,
+ 512, &retlen, (char *)buffer, (char *)&oob);
return 0;
}
#endif /* CONFIG_NFTL_RW */
@@ -651,20 +714,22 @@ static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
char *buffer)
{
struct NFTLrecord *nftl = (void *)mbd;
+ struct mtd_info *mtd = nftl->mbd.mtd;
u16 lastgoodEUN;
u16 thisEUN = nftl->EUNtable[block / (nftl->EraseSize / 512)];
unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1);
- unsigned int status;
+ unsigned int status;
int silly = MAX_LOOPS;
- size_t retlen;
- struct nftl_bci bci;
+ size_t retlen;
+ struct nftl_bci bci;
lastgoodEUN = BLOCK_NIL;
- if (thisEUN != BLOCK_NIL) {
+ if (thisEUN != BLOCK_NIL) {
while (thisEUN < nftl->nb_blocks) {
- if (MTD_READOOB(nftl->mbd.mtd, (thisEUN * nftl->EraseSize) + blockofs,
- 8, &retlen, (char *)&bci) < 0)
+ if (nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) +
+ blockofs, 8, &retlen,
+ (char *)&bci) < 0)
status = SECTOR_IGNORE;
else
status = bci.Status | bci.Status1;
@@ -694,7 +759,7 @@ static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
}
thisEUN = nftl->ReplUnitTable[thisEUN];
}
- }
+ }
the_end:
if (lastgoodEUN == BLOCK_NIL) {
@@ -703,7 +768,9 @@ static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
} else {
loff_t ptr = (lastgoodEUN * nftl->EraseSize) + blockofs;
size_t retlen;
- if (MTD_READ(nftl->mbd.mtd, ptr, 512, &retlen, buffer))
+ int res = mtd->read(mtd, ptr, 512, &retlen, buffer);
+
+ if (res < 0 && res != -EUCLEAN)
return -EIO;
}
return 0;
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 3b104ebb219..067262ee8df 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -33,6 +33,11 @@
char nftlmountrev[]="$Revision: 1.41 $";
+extern int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+extern int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+
/* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
* various device information of the NFTL partition and Bad Unit Table. Update
* the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
@@ -45,6 +50,7 @@ static int find_boot_record(struct NFTLrecord *nftl)
size_t retlen;
u8 buf[SECTORSIZE];
struct NFTLMediaHeader *mh = &nftl->MediaHdr;
+ struct mtd_info *mtd = nftl->mbd.mtd;
unsigned int i;
/* Assume logical EraseSize == physical erasesize for starting the scan.
@@ -65,7 +71,8 @@ static int find_boot_record(struct NFTLrecord *nftl)
/* Check for ANAND header first. Then can whinge if it's found but later
checks fail */
- ret = MTD_READ(nftl->mbd.mtd, block * nftl->EraseSize, SECTORSIZE, &retlen, buf);
+ ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
+ &retlen, buf);
/* We ignore ret in case the ECC of the MediaHeader is invalid
(which is apparently acceptable) */
if (retlen != SECTORSIZE) {
@@ -90,8 +97,9 @@ static int find_boot_record(struct NFTLrecord *nftl)
}
/* To be safer with BIOS, also use erase mark as discriminant */
- if ((ret = MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8,
- 8, &retlen, (char *)&h1) < 0)) {
+ if ((ret = nftl_read_oob(mtd, block * nftl->EraseSize +
+ SECTORSIZE + 8, 8, &retlen,
+ (char *)&h1) < 0)) {
printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n",
block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
continue;
@@ -109,8 +117,8 @@ static int find_boot_record(struct NFTLrecord *nftl)
}
/* Finally reread to check ECC */
- if ((ret = MTD_READECC(nftl->mbd.mtd, block * nftl->EraseSize, SECTORSIZE,
- &retlen, buf, (char *)&oob, NULL) < 0)) {
+ if ((ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
+ &retlen, buf) < 0)) {
printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n",
block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
continue;
@@ -228,9 +236,9 @@ device is already correct.
The new DiskOnChip driver already scanned the bad block table. Just query it.
if ((i & (SECTORSIZE - 1)) == 0) {
/* read one sector for every SECTORSIZE of blocks */
- if ((ret = MTD_READECC(nftl->mbd.mtd, block * nftl->EraseSize +
- i + SECTORSIZE, SECTORSIZE, &retlen, buf,
- (char *)&oob, NULL)) < 0) {
+ if ((ret = mtd->read(nftl->mbd.mtd, block * nftl->EraseSize +
+ i + SECTORSIZE, SECTORSIZE, &retlen,
+ buf)) < 0) {
printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n",
ret);
kfree(nftl->ReplUnitTable);
@@ -268,18 +276,22 @@ static int memcmpb(void *a, int c, int n)
static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len,
int check_oob)
{
- int i;
- size_t retlen;
u8 buf[SECTORSIZE + nftl->mbd.mtd->oobsize];
+ struct mtd_info *mtd = nftl->mbd.mtd;
+ size_t retlen;
+ int i;
for (i = 0; i < len; i += SECTORSIZE) {
- if (MTD_READECC(nftl->mbd.mtd, address, SECTORSIZE, &retlen, buf, &buf[SECTORSIZE], &nftl->oobinfo) < 0)
+ if (mtd->read(mtd, address, SECTORSIZE, &retlen, buf))
return -1;
if (memcmpb(buf, 0xff, SECTORSIZE) != 0)
return -1;
if (check_oob) {
- if (memcmpb(buf + SECTORSIZE, 0xff, nftl->mbd.mtd->oobsize) != 0)
+ if(nftl_read_oob(mtd, address, mtd->oobsize,
+ &retlen, &buf[SECTORSIZE]) < 0)
+ return -1;
+ if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0)
return -1;
}
address += SECTORSIZE;
@@ -301,10 +313,11 @@ int NFTL_formatblock(struct NFTLrecord *nftl, int block)
unsigned int nb_erases, erase_mark;
struct nftl_uci1 uci;
struct erase_info *instr = &nftl->instr;
+ struct mtd_info *mtd = nftl->mbd.mtd;
/* Read the Unit Control Information #1 for Wear-Leveling */
- if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8,
- 8, &retlen, (char *)&uci) < 0)
+ if (nftl_read_oob(mtd, block * nftl->EraseSize + SECTORSIZE + 8,
+ 8, &retlen, (char *)&uci) < 0)
goto default_uci1;
erase_mark = le16_to_cpu ((uci.EraseMark | uci.EraseMark1));
@@ -321,7 +334,7 @@ int NFTL_formatblock(struct NFTLrecord *nftl, int block)
instr->mtd = nftl->mbd.mtd;
instr->addr = block * nftl->EraseSize;
instr->len = nftl->EraseSize;
- MTD_ERASE(nftl->mbd.mtd, instr);
+ mtd->erase(mtd, instr);
if (instr->state == MTD_ERASE_FAILED) {
printk("Error while formatting block %d\n", block);
@@ -343,8 +356,8 @@ int NFTL_formatblock(struct NFTLrecord *nftl, int block)
goto fail;
uci.WearInfo = le32_to_cpu(nb_erases);
- if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8,
- &retlen, (char *)&uci) < 0)
+ if (nftl_write_oob(mtd, block * nftl->EraseSize + SECTORSIZE +
+ 8, 8, &retlen, (char *)&uci) < 0)
goto fail;
return 0;
fail:
@@ -365,6 +378,7 @@ fail:
* case. */
static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block)
{
+ struct mtd_info *mtd = nftl->mbd.mtd;
unsigned int block, i, status;
struct nftl_bci bci;
int sectors_per_block;
@@ -374,8 +388,9 @@ static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_b
block = first_block;
for (;;) {
for (i = 0; i < sectors_per_block; i++) {
- if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + i * SECTORSIZE,
- 8, &retlen, (char *)&bci) < 0)
+ if (nftl_read_oob(mtd,
+ block * nftl->EraseSize + i * SECTORSIZE,
+ 8, &retlen, (char *)&bci) < 0)
status = SECTOR_IGNORE;
else
status = bci.Status | bci.Status1;
@@ -394,9 +409,10 @@ static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_b
/* sector not free actually : mark it as SECTOR_IGNORE */
bci.Status = SECTOR_IGNORE;
bci.Status1 = SECTOR_IGNORE;
- MTD_WRITEOOB(nftl->mbd.mtd,
- block * nftl->EraseSize + i * SECTORSIZE,
- 8, &retlen, (char *)&bci);
+ nftl_write_oob(mtd, block *
+ nftl->EraseSize +
+ i * SECTORSIZE, 8,
+ &retlen, (char *)&bci);
}
break;
default:
@@ -481,13 +497,14 @@ static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
* 1. */
static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
{
+ struct mtd_info *mtd = nftl->mbd.mtd;
struct nftl_uci1 h1;
unsigned int erase_mark;
size_t retlen;
/* check erase mark. */
- if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8,
- &retlen, (char *)&h1) < 0)
+ if (nftl_read_oob(mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8,
+ &retlen, (char *)&h1) < 0)
return -1;
erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
@@ -501,8 +518,9 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
h1.EraseMark = cpu_to_le16(ERASE_MARK);
h1.EraseMark1 = cpu_to_le16(ERASE_MARK);
h1.WearInfo = cpu_to_le32(0);
- if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8,
- &retlen, (char *)&h1) < 0)
+ if (nftl_write_oob(mtd,
+ block * nftl->EraseSize + SECTORSIZE + 8, 8,
+ &retlen, (char *)&h1) < 0)
return -1;
} else {
#if 0
@@ -513,8 +531,8 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
SECTORSIZE, 0) != 0)
return -1;
- if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + i,
- 16, &retlen, buf) < 0)
+ if (nftl_read_oob(mtd, block * nftl->EraseSize + i,
+ 16, &retlen, buf) < 0)
return -1;
if (i == SECTORSIZE) {
/* skip erase mark */
@@ -540,11 +558,12 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
*/
static int get_fold_mark(struct NFTLrecord *nftl, unsigned int block)
{
+ struct mtd_info *mtd = nftl->mbd.mtd;
struct nftl_uci2 uci;
size_t retlen;
- if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + 2 * SECTORSIZE + 8,
- 8, &retlen, (char *)&uci) < 0)
+ if (nftl_read_oob(mtd, block * nftl->EraseSize + 2 * SECTORSIZE + 8,
+ 8, &retlen, (char *)&uci) < 0)
return 0;
return le16_to_cpu((uci.FoldMark | uci.FoldMark1));
@@ -558,6 +577,7 @@ int NFTL_mount(struct NFTLrecord *s)
int chain_length, do_format_chain;
struct nftl_uci0 h0;
struct nftl_uci1 h1;
+ struct mtd_info *mtd = s->mbd.mtd;
size_t retlen;
/* search for NFTL MediaHeader and Spare NFTL Media Header */
@@ -582,10 +602,13 @@ int NFTL_mount(struct NFTLrecord *s)
for (;;) {
/* read the block header. If error, we format the chain */
- if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8, 8,
- &retlen, (char *)&h0) < 0 ||
- MTD_READOOB(s->mbd.mtd, block * s->EraseSize + SECTORSIZE + 8, 8,
- &retlen, (char *)&h1) < 0) {
+ if (nftl_read_oob(mtd,
+ block * s->EraseSize + 8, 8,
+ &retlen, (char *)&h0) < 0 ||
+ nftl_read_oob(mtd,
+ block * s->EraseSize +
+ SECTORSIZE + 8, 8,
+ &retlen, (char *)&h1) < 0) {
s->ReplUnitTable[block] = BLOCK_NIL;
do_format_chain = 1;
break;
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 126ff6bf63d..5930a03736d 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -29,6 +29,20 @@ config MTD_ONENAND_GENERIC
help
Support for OneNAND flash via platform device driver.
+config MTD_ONENAND_OTP
+ bool "OneNAND OTP Support"
+ depends on MTD_ONENAND
+ help
+ One Block of the NAND Flash Array memory is reserved as
+ a One-Time Programmable Block memory area.
+ Also, 1st Block of NAND Flash Array can be used as OTP.
+
+ The OTP block can be read, programmed and locked using the same
+ operations as any other NAND Flash Array memory block.
+ OTP block cannot be erased.
+
+ OTP block is fully-guaranteed to be a valid block.
+
config MTD_ONENAND_SYNC_READ
bool "OneNAND Sync. Burst Read Support"
depends on ARCH_OMAP
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index a53a73fc2a5..84ec40d2543 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -23,8 +23,7 @@
/**
* onenand_oob_64 - oob info for large (2KB) page
*/
-static struct nand_oobinfo onenand_oob_64 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout onenand_oob_64 = {
.eccbytes = 20,
.eccpos = {
8, 9, 10, 11, 12,
@@ -34,14 +33,14 @@ static struct nand_oobinfo onenand_oob_64 = {
},
.oobfree = {
{2, 3}, {14, 2}, {18, 3}, {30, 2},
- {24, 3}, {46, 2}, {40, 3}, {62, 2} }
+ {34, 3}, {46, 2}, {50, 3}, {62, 2}
+ }
};
/**
* onenand_oob_32 - oob info for middle (1KB) page
*/
-static struct nand_oobinfo onenand_oob_32 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout onenand_oob_32 = {
.eccbytes = 10,
.eccpos = {
8, 9, 10, 11, 12,
@@ -190,7 +189,7 @@ static int onenand_buffer_address(int dataram1, int sectors, int count)
static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len)
{
struct onenand_chip *this = mtd->priv;
- int value, readcmd = 0;
+ int value, readcmd = 0, block_cmd = 0;
int block, page;
/* Now we use page size operation */
int sectors = 4, count = 4;
@@ -206,6 +205,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
case ONENAND_CMD_ERASE:
case ONENAND_CMD_BUFFERRAM:
+ case ONENAND_CMD_OTP_ACCESS:
+ block_cmd = 1;
block = (int) (addr >> this->erase_shift);
page = -1;
break;
@@ -233,6 +234,12 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
/* Write 'DFS, FBA' of Flash */
value = onenand_block_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
+
+ if (block_cmd) {
+ /* Select DataRAM for DDP */
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ }
}
if (page != -1) {
@@ -301,6 +308,7 @@ static int onenand_wait(struct mtd_info *mtd, int state)
if (state != FL_READING)
cond_resched();
+ touch_softlockup_watchdog();
}
/* To get correct interrupt status in timeout case */
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
@@ -344,7 +352,7 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
- return mtd->oobblock;
+ return mtd->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
@@ -372,6 +380,17 @@ static int onenand_read_bufferram(struct mtd_info *mtd, int area,
bufferram += onenand_bufferram_offset(mtd, area);
+ if (ONENAND_CHECK_BYTE_ACCESS(count)) {
+ unsigned short word;
+
+ /* Align with word(16-bit) size */
+ count--;
+
+ /* Read word and save byte */
+ word = this->read_word(bufferram + offset + count);
+ buffer[count] = (word & 0xff);
+ }
+
memcpy(buffer, bufferram + offset, count);
return 0;
@@ -399,6 +418,17 @@ static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
+ if (ONENAND_CHECK_BYTE_ACCESS(count)) {
+ unsigned short word;
+
+ /* Align with word(16-bit) size */
+ count--;
+
+ /* Read word and save byte */
+ word = this->read_word(bufferram + offset + count);
+ buffer[count] = (word & 0xff);
+ }
+
memcpy(buffer, bufferram + offset, count);
this->mmcontrol(mtd, 0);
@@ -426,6 +456,22 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
bufferram += onenand_bufferram_offset(mtd, area);
+ if (ONENAND_CHECK_BYTE_ACCESS(count)) {
+ unsigned short word;
+ int byte_offset;
+
+ /* Align with word(16-bit) size */
+ count--;
+
+ /* Calculate byte access offset */
+ byte_offset = offset + count;
+
+ /* Read word and save byte */
+ word = this->read_word(bufferram + byte_offset);
+ word = (word & ~0xff) | buffer[count];
+ this->write_word(word, bufferram + byte_offset);
+ }
+
memcpy(bufferram + offset, buffer, count);
return 0;
@@ -549,31 +595,28 @@ static void onenand_release_device(struct mtd_info *mtd)
}
/**
- * onenand_read_ecc - [MTD Interface] Read data with ECC
+ * onenand_read - [MTD Interface] Read data from flash
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
- * @param oob_buf filesystem supplied oob data buffer
- * @param oobsel oob selection structure
*
- * OneNAND read with ECC
- */
-static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf,
- u_char *oob_buf, struct nand_oobinfo *oobsel)
+ * Read with ecc
+*/
+static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
int read = 0, column;
int thislen;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: Attempt read beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
}
@@ -584,14 +627,14 @@ static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
/* TODO handling oob */
while (read < len) {
- thislen = min_t(int, mtd->oobblock, len - read);
+ thislen = min_t(int, mtd->writesize, len - read);
- column = from & (mtd->oobblock - 1);
- if (column + thislen > mtd->oobblock)
- thislen = mtd->oobblock - column;
+ column = from & (mtd->writesize - 1);
+ if (column + thislen > mtd->writesize)
+ thislen = mtd->writesize - column;
if (!onenand_check_bufferram(mtd, from)) {
- this->command(mtd, ONENAND_CMD_READ, from, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
ret = this->wait(mtd, FL_READING);
/* First copy data and check return value for ECC handling */
@@ -606,7 +649,7 @@ static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
break;
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: read failed = %d\n", ret);
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: read failed = %d\n", ret);
goto out;
}
@@ -628,23 +671,7 @@ out:
}
/**
- * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc
- * @param mtd MTD device structure
- * @param from offset to read from
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put data
- *
- * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL
-*/
-static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
-}
-
-/**
- * onenand_read_oob - [MTD Interface] OneNAND read out-of-band
+ * onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
@@ -653,8 +680,8 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
*
* OneNAND read out-of-band data from the spare area
*/
-static int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
+int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
int read = 0, thislen, column;
@@ -704,7 +731,7 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
/* Read more? */
if (read < len) {
/* Page size */
- from += mtd->oobblock;
+ from += mtd->writesize;
column = 0;
}
}
@@ -717,8 +744,53 @@ out:
return ret;
}
+/**
+ * onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
+ */
+static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
+
+ return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->len,
+ &ops->retlen, ops->oobbuf);
+}
+
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
/**
+ * onenand_verify_oob - [GENERIC] verify the oob contents after a write
+ * @param mtd MTD device structure
+ * @param buf the databuffer to verify
+ * @param to offset to read from
+ * @param len number of bytes to read and compare
+ *
+ */
+static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len)
+{
+ struct onenand_chip *this = mtd->priv;
+ char *readp = this->page_buf;
+ int column = to & (mtd->oobsize - 1);
+ int status, i;
+
+ this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
+ onenand_update_bufferram(mtd, to, 0);
+ status = this->wait(mtd, FL_READING);
+ if (status)
+ return status;
+
+ this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len);
+
+ for(i = 0; i < len; i++)
+ if (buf[i] != 0xFF && buf[i] != readp[i])
+ return -EBADMSG;
+
+ return 0;
+}
+
+/**
* onenand_verify_page - [GENERIC] verify the chip contents after a write
* @param mtd MTD device structure
* @param buf the databuffer to verify
@@ -731,7 +803,7 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr)
void __iomem *dataram0, *dataram1;
int ret = 0;
- this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
ret = this->wait(mtd, FL_READING);
if (ret)
@@ -741,53 +813,51 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr)
/* Check, if the two dataram areas are same */
dataram0 = this->base + ONENAND_DATARAM;
- dataram1 = dataram0 + mtd->oobblock;
+ dataram1 = dataram0 + mtd->writesize;
- if (memcmp(dataram0, dataram1, mtd->oobblock))
+ if (memcmp(dataram0, dataram1, mtd->writesize))
return -EBADMSG;
return 0;
}
#else
#define onenand_verify_page(...) (0)
+#define onenand_verify_oob(...) (0)
#endif
-#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0)
+#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0)
/**
- * onenand_write_ecc - [MTD Interface] OneNAND write with ECC
+ * onenand_write - [MTD Interface] write buffer to FLASH
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
- * @param eccbuf filesystem supplied oob data buffer
- * @param oobsel oob selection structure
*
- * OneNAND write with ECC
+ * Write with ECC
*/
-static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
+static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
{
struct onenand_chip *this = mtd->priv;
int written = 0;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_write: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt write to past end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt write to past end of device\n");
return -EINVAL;
}
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt to write not page aligned data\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt to write not page aligned data\n");
return -EINVAL;
}
@@ -796,20 +866,20 @@ static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
/* Loop until all data write */
while (written < len) {
- int thislen = min_t(int, mtd->oobblock, len - written);
+ int thislen = min_t(int, mtd->writesize, len - written);
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize);
this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
- this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
onenand_update_bufferram(mtd, to, 1);
ret = this->wait(mtd, FL_WRITING);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: write filaed %d\n", ret);
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret);
goto out;
}
@@ -818,7 +888,7 @@ static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
/* Only check verify write turn on */
ret = onenand_verify_page(mtd, (u_char *) buf, to);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: verify failed %d\n", ret);
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret);
goto out;
}
@@ -839,24 +909,7 @@ out:
}
/**
- * onenand_write - [MTD Interface] compability function for onenand_write_ecc
- * @param mtd MTD device structure
- * @param to offset to write to
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of written bytes
- * @param buf the data to write
- *
- * This function simply calls onenand_write_ecc
- * with oob buffer and oobsel = NULL
- */
-static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL);
-}
-
-/**
- * onenand_write_oob - [MTD Interface] OneNAND write out-of-band
+ * onenand_do_write_oob - [Internal] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
@@ -865,11 +918,11 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
*
* OneNAND write out-of-band
*/
-static int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
{
struct onenand_chip *this = mtd->priv;
- int column, status;
+ int column, ret = 0;
int written = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
@@ -894,16 +947,27 @@ static int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
- this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
- this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ /* We send data to spare ram with oobsize
+ * to prevent byte access */
+ memset(this->page_buf, 0xff, mtd->oobsize);
+ memcpy(this->page_buf + column, buf, thislen);
+ this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
- status = this->wait(mtd, FL_WRITING);
- if (status)
+ ret = this->wait(mtd, FL_WRITING);
+ if (ret) {
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret);
+ goto out;
+ }
+
+ ret = onenand_verify_oob(mtd, buf, to, thislen);
+ if (ret) {
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret);
goto out;
+ }
written += thislen;
@@ -920,145 +984,22 @@ out:
*retlen = written;
- return 0;
+ return ret;
}
/**
- * onenand_writev_ecc - [MTD Interface] write with iovec with ecc
- * @param mtd MTD device structure
- * @param vecs the iovectors to write
- * @param count number of vectors
- * @param to offset to write to
- * @param retlen pointer to variable to store the number of written bytes
- * @param eccbuf filesystem supplied oob data buffer
- * @param oobsel oob selection structure
- *
- * OneNAND write with iovec with ecc
+ * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*/
-static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
+static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
- struct onenand_chip *this = mtd->priv;
- unsigned char *pbuf;
- size_t total_len, len;
- int i, written = 0;
- int ret = 0;
-
- /* Preset written len for early exit */
- *retlen = 0;
-
- /* Calculate total length of data */
- total_len = 0;
- for (i = 0; i < count; i++)
- total_len += vecs[i].iov_len;
-
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_writev_ecc: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
-
- /* Do not allow write past end of the device */
- if (unlikely((to + total_len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempted write past end of device\n");
- return -EINVAL;
- }
-
- /* Reject writes, which are not page aligned */
- if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(total_len))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempt to write not page aligned data\n");
- return -EINVAL;
- }
-
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_WRITING);
-
- /* TODO handling oob */
-
- /* Loop until all keve's data has been written */
- len = 0;
- while (count) {
- pbuf = this->page_buf;
- /*
- * If the given tuple is >= pagesize then
- * write it out from the iov
- */
- if ((vecs->iov_len - len) >= mtd->oobblock) {
- pbuf = vecs->iov_base + len;
-
- len += mtd->oobblock;
-
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- } else {
- int cnt = 0, thislen;
- while (cnt < mtd->oobblock) {
- thislen = min_t(int, mtd->oobblock - cnt, vecs->iov_len - len);
- memcpy(this->page_buf + cnt, vecs->iov_base + len, thislen);
- cnt += thislen;
- len += thislen;
-
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- }
- }
-
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock);
+ BUG_ON(ops->mode != MTD_OOB_PLACE);
- this->write_bufferram(mtd, ONENAND_DATARAM, pbuf, 0, mtd->oobblock);
- this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
-
- this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock);
-
- onenand_update_bufferram(mtd, to, 1);
-
- ret = this->wait(mtd, FL_WRITING);
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: write failed %d\n", ret);
- goto out;
- }
-
-
- /* Only check verify write turn on */
- ret = onenand_verify_page(mtd, (u_char *) pbuf, to);
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: verify failed %d\n", ret);
- goto out;
- }
-
- written += mtd->oobblock;
-
- to += mtd->oobblock;
- }
-
-out:
- /* Deselect and wakt up anyone waiting on the device */
- onenand_release_device(mtd);
-
- *retlen = written;
-
- return 0;
-}
-
-/**
- * onenand_writev - [MTD Interface] compabilty function for onenand_writev_ecc
- * @param mtd MTD device structure
- * @param vecs the iovectors to write
- * @param count number of vectors
- * @param to offset to write to
- * @param retlen pointer to variable to store the number of written bytes
- *
- * OneNAND write with kvec. This just calls the ecc function
- */
-static int onenand_writev(struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen)
-{
- return onenand_writev_ecc(mtd, vecs, count, to, retlen, NULL, NULL);
+ return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->len,
+ &ops->retlen, ops->oobbuf);
}
/**
@@ -1227,7 +1168,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* We write two bytes, so we dont have to mess with 16 bit access */
ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
- return mtd->write_oob(mtd, ofs , 2, &retlen, buf);
+ return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf);
}
/**
@@ -1324,6 +1265,304 @@ static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
return 0;
}
+#ifdef CONFIG_MTD_ONENAND_OTP
+
+/* Interal OTP operation */
+typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
+ size_t *retlen, u_char *buf);
+
+/**
+ * do_otp_read - [DEFAULT] Read OTP block area
+ * @param mtd MTD device structure
+ * @param from The offset to read
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of readbytes
+ * @param buf the databuffer to put/get data
+ *
+ * Read OTP block area.
+ */
+static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ret;
+
+ /* Enter OTP access mode */
+ this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+ this->wait(mtd, FL_OTPING);
+
+ ret = mtd->read(mtd, from, len, retlen, buf);
+
+ /* Exit OTP access mode */
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ this->wait(mtd, FL_RESETING);
+
+ return ret;
+}
+
+/**
+ * do_otp_write - [DEFAULT] Write OTP block area
+ * @param mtd MTD device structure
+ * @param from The offset to write
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of write bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Write OTP block area.
+ */
+static int do_otp_write(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned char *pbuf = buf;
+ int ret;
+
+ /* Force buffer page aligned */
+ if (len < mtd->writesize) {
+ memcpy(this->page_buf, buf, len);
+ memset(this->page_buf + len, 0xff, mtd->writesize - len);
+ pbuf = this->page_buf;
+ len = mtd->writesize;
+ }
+
+ /* Enter OTP access mode */
+ this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+ this->wait(mtd, FL_OTPING);
+
+ ret = mtd->write(mtd, from, len, retlen, pbuf);
+
+ /* Exit OTP access mode */
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ this->wait(mtd, FL_RESETING);
+
+ return ret;
+}
+
+/**
+ * do_otp_lock - [DEFAULT] Lock OTP block area
+ * @param mtd MTD device structure
+ * @param from The offset to lock
+ * @param len number of bytes to lock
+ * @param retlen pointer to variable to store the number of lock bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Lock OTP block area.
+ */
+static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ret;
+
+ /* Enter OTP access mode */
+ this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+ this->wait(mtd, FL_OTPING);
+
+ ret = onenand_do_write_oob(mtd, from, len, retlen, buf);
+
+ /* Exit OTP access mode */
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ this->wait(mtd, FL_RESETING);
+
+ return ret;
+}
+
+/**
+ * onenand_otp_walk - [DEFAULT] Handle OTP operation
+ * @param mtd MTD device structure
+ * @param from The offset to read/write
+ * @param len number of bytes to read/write
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put/get data
+ * @param action do given action
+ * @param mode specify user and factory
+ *
+ * Handle OTP operation.
+ */
+static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf,
+ otp_op_t action, int mode)
+{
+ struct onenand_chip *this = mtd->priv;
+ int otp_pages;
+ int density;
+ int ret = 0;
+
+ *retlen = 0;
+
+ density = this->device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ if (density < ONENAND_DEVICE_DENSITY_512Mb)
+ otp_pages = 20;
+ else
+ otp_pages = 10;
+
+ if (mode == MTD_OTP_FACTORY) {
+ from += mtd->writesize * otp_pages;
+ otp_pages = 64 - otp_pages;
+ }
+
+ /* Check User/Factory boundary */
+ if (((mtd->writesize * otp_pages) - (from + len)) < 0)
+ return 0;
+
+ while (len > 0 && otp_pages > 0) {
+ if (!action) { /* OTP Info functions */
+ struct otp_info *otpinfo;
+
+ len -= sizeof(struct otp_info);
+ if (len <= 0)
+ return -ENOSPC;
+
+ otpinfo = (struct otp_info *) buf;
+ otpinfo->start = from;
+ otpinfo->length = mtd->writesize;
+ otpinfo->locked = 0;
+
+ from += mtd->writesize;
+ buf += sizeof(struct otp_info);
+ *retlen += sizeof(struct otp_info);
+ } else {
+ size_t tmp_retlen;
+ int size = len;
+
+ ret = action(mtd, from, len, &tmp_retlen, buf);
+
+ buf += size;
+ len -= size;
+ *retlen += size;
+
+ if (ret < 0)
+ return ret;
+ }
+ otp_pages--;
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
+ * @param mtd MTD device structure
+ * @param buf the databuffer to put/get data
+ * @param len number of bytes to read
+ *
+ * Read factory OTP info.
+ */
+static int onenand_get_fact_prot_info(struct mtd_info *mtd,
+ struct otp_info *buf, size_t len)
+{
+ size_t retlen;
+ int ret;
+
+ ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY);
+
+ return ret ? : retlen;
+}
+
+/**
+ * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area
+ * @param mtd MTD device structure
+ * @param from The offset to read
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Read factory OTP area.
+ */
+static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+{
+ return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY);
+}
+
+/**
+ * onenand_get_user_prot_info - [MTD Interface] Read user OTP info
+ * @param mtd MTD device structure
+ * @param buf the databuffer to put/get data
+ * @param len number of bytes to read
+ *
+ * Read user OTP info.
+ */
+static int onenand_get_user_prot_info(struct mtd_info *mtd,
+ struct otp_info *buf, size_t len)
+{
+ size_t retlen;
+ int ret;
+
+ ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER);
+
+ return ret ? : retlen;
+}
+
+/**
+ * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area
+ * @param mtd MTD device structure
+ * @param from The offset to read
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Read user OTP area.
+ */
+static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+{
+ return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER);
+}
+
+/**
+ * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area
+ * @param mtd MTD device structure
+ * @param from The offset to write
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of write bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Write user OTP area.
+ */
+static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+{
+ return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER);
+}
+
+/**
+ * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area
+ * @param mtd MTD device structure
+ * @param from The offset to lock
+ * @param len number of bytes to unlock
+ *
+ * Write lock mark on spare area in page 0 in OTP block
+ */
+static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len)
+{
+ unsigned char oob_buf[64];
+ size_t retlen;
+ int ret;
+
+ memset(oob_buf, 0xff, mtd->oobsize);
+ /*
+ * Note: OTP lock operation
+ * OTP block : 0xXXFC
+ * 1st block : 0xXXF3 (If chip support)
+ * Both : 0xXXF0 (If chip support)
+ */
+ oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
+
+ /*
+ * Write lock mark to 8th word of sector0 of page0 of the spare0.
+ * We write 16 bytes spare area instead of 2 bytes.
+ */
+ from = 0;
+ len = 16;
+
+ ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER);
+
+ return ret ? : retlen;
+}
+#endif /* CONFIG_MTD_ONENAND_OTP */
+
/**
* onenand_print_device_info - Print device ID
* @param device device ID
@@ -1423,15 +1662,15 @@ static int onenand_probe(struct mtd_info *mtd)
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
- mtd->oobblock = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
- mtd->oobsize = mtd->oobblock >> 5;
+ mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
+ mtd->oobsize = mtd->writesize >> 5;
/* Pagers per block is always 64 in OneNAND */
- mtd->erasesize = mtd->oobblock << 6;
+ mtd->erasesize = mtd->writesize << 6;
this->erase_shift = ffs(mtd->erasesize) - 1;
- this->page_shift = ffs(mtd->oobblock) - 1;
+ this->page_shift = ffs(mtd->writesize) - 1;
this->ppb_shift = (this->erase_shift - this->page_shift);
- this->page_mask = (mtd->erasesize / mtd->oobblock) - 1;
+ this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
/* REVIST: Multichip handling */
@@ -1475,7 +1714,6 @@ static void onenand_resume(struct mtd_info *mtd)
"in suspended state\n");
}
-
/**
* onenand_scan - [OneNAND Interface] Scan for the OneNAND device
* @param mtd MTD device structure
@@ -1522,7 +1760,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
/* Allocate buffers, if necessary */
if (!this->page_buf) {
size_t len;
- len = mtd->oobblock + mtd->oobsize;
+ len = mtd->writesize + mtd->oobsize;
this->page_buf = kmalloc(len, GFP_KERNEL);
if (!this->page_buf) {
printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
@@ -1537,40 +1775,42 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
switch (mtd->oobsize) {
case 64:
- this->autooob = &onenand_oob_64;
+ this->ecclayout = &onenand_oob_64;
break;
case 32:
- this->autooob = &onenand_oob_32;
+ this->ecclayout = &onenand_oob_32;
break;
default:
printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
mtd->oobsize);
/* To prevent kernel oops */
- this->autooob = &onenand_oob_32;
+ this->ecclayout = &onenand_oob_32;
break;
}
- memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
+ mtd->ecclayout = this->ecclayout;
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
- mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
+ mtd->flags = MTD_CAP_NANDFLASH;
mtd->ecctype = MTD_ECC_SW;
mtd->erase = onenand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
mtd->read = onenand_read;
mtd->write = onenand_write;
- mtd->read_ecc = onenand_read_ecc;
- mtd->write_ecc = onenand_write_ecc;
mtd->read_oob = onenand_read_oob;
mtd->write_oob = onenand_write_oob;
- mtd->readv = NULL;
- mtd->readv_ecc = NULL;
- mtd->writev = onenand_writev;
- mtd->writev_ecc = onenand_writev_ecc;
+#ifdef CONFIG_MTD_ONENAND_OTP
+ mtd->get_fact_prot_info = onenand_get_fact_prot_info;
+ mtd->read_fact_prot_reg = onenand_read_fact_prot_reg;
+ mtd->get_user_prot_info = onenand_get_user_prot_info;
+ mtd->read_user_prot_reg = onenand_read_user_prot_reg;
+ mtd->write_user_prot_reg = onenand_write_user_prot_reg;
+ mtd->lock_user_prot_reg = onenand_lock_user_prot_reg;
+#endif
mtd->sync = onenand_sync;
mtd->lock = NULL;
mtd->unlock = onenand_unlock;
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 4510d3361ea..1b00dac3d7d 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -17,6 +17,9 @@
#include <linux/mtd/onenand.h>
#include <linux/mtd/compatmac.h>
+extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
* @param buf the buffer to search
@@ -87,13 +90,13 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
/* No need to read pages fully,
* just read required OOB bytes */
- ret = mtd->read_oob(mtd, from + j * mtd->oobblock + bd->offs,
- readlen, &retlen, &buf[0]);
+ ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
+ readlen, &retlen, &buf[0]);
if (ret)
return ret;
- if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+ if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
i >> 1, (unsigned int) from);
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index c077d2ec9cd..5b58523e4d4 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,5 +1,5 @@
/*
- * $Id: redboot.c,v 1.19 2005/12/01 10:03:51 dwmw2 Exp $
+ * $Id: redboot.c,v 1.21 2006/03/30 18:34:37 bjd Exp $
*
* Parse RedBoot-style Flash Image System (FIS) tables and
* produce a Linux partition array to match.
@@ -15,14 +15,14 @@
struct fis_image_desc {
unsigned char name[16]; // Null terminated name
- unsigned long flash_base; // Address within FLASH of image
- unsigned long mem_base; // Address in memory where it executes
- unsigned long size; // Length of image
- unsigned long entry_point; // Execution entry point
- unsigned long data_length; // Length of actual data
- unsigned char _pad[256-(16+7*sizeof(unsigned long))];
- unsigned long desc_cksum; // Checksum over image descriptor
- unsigned long file_cksum; // Checksum over image data
+ uint32_t flash_base; // Address within FLASH of image
+ uint32_t mem_base; // Address in memory where it executes
+ uint32_t size; // Length of image
+ uint32_t entry_point; // Execution entry point
+ uint32_t data_length; // Length of actual data
+ unsigned char _pad[256-(16+7*sizeof(uint32_t))];
+ uint32_t desc_cksum; // Checksum over image descriptor
+ uint32_t file_cksum; // Checksum over image data
};
struct fis_list {
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index a3e00a4635a..fa4362fb4dd 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2005 Sean Young <sean@mess.org>
*
- * $Id: rfd_ftl.c,v 1.5 2005/11/07 11:14:21 gleixner Exp $
+ * $Id: rfd_ftl.c,v 1.8 2006/01/15 12:51:44 sean Exp $
*
* This type of flash translation layer (FTL) is used by the Embedded BIOS
* by General Software. It is known as the Resident Flash Disk (RFD), see:
@@ -61,6 +61,7 @@ struct block {
BLOCK_OK,
BLOCK_ERASING,
BLOCK_ERASED,
+ BLOCK_UNUSED,
BLOCK_FAILED
} state;
int free_sectors;
@@ -99,10 +100,8 @@ static int build_block_map(struct partition *part, int block_no)
block->offset = part->block_size * block_no;
if (le16_to_cpu(part->header_cache[0]) != RFD_MAGIC) {
- block->state = BLOCK_ERASED; /* assumption */
- block->free_sectors = part->data_sectors_per_block;
- part->reserved_block = block_no;
- return 1;
+ block->state = BLOCK_UNUSED;
+ return -ENOENT;
}
block->state = BLOCK_OK;
@@ -124,7 +123,7 @@ static int build_block_map(struct partition *part, int block_no)
entry = 0;
if (entry >= part->sector_count) {
- printk(KERN_NOTICE PREFIX
+ printk(KERN_WARNING PREFIX
"'%s': unit #%d: entry %d corrupt, "
"sector %d out of range\n",
part->mbd.mtd->name, block_no, i, entry);
@@ -132,7 +131,7 @@ static int build_block_map(struct partition *part, int block_no)
}
if (part->sector_map[entry] != -1) {
- printk(KERN_NOTICE PREFIX
+ printk(KERN_WARNING PREFIX
"'%s': more than one entry for sector %d\n",
part->mbd.mtd->name, entry);
part->errors = 1;
@@ -167,7 +166,7 @@ static int scan_header(struct partition *part)
/* each erase block has three bytes header, followed by the map */
part->header_sectors_per_block =
((HEADER_MAP_OFFSET + sectors_per_block) *
- sizeof(u16) + SECTOR_SIZE - 1) / SECTOR_SIZE;
+ sizeof(u16) + SECTOR_SIZE - 1) / SECTOR_SIZE;
part->data_sectors_per_block = sectors_per_block -
part->header_sectors_per_block;
@@ -226,7 +225,7 @@ static int scan_header(struct partition *part)
}
if (part->reserved_block == -1) {
- printk(KERN_NOTICE PREFIX "'%s': no empty erase unit found\n",
+ printk(KERN_WARNING PREFIX "'%s': no empty erase unit found\n",
part->mbd.mtd->name);
part->errors = 1;
@@ -315,7 +314,7 @@ static void erase_callback(struct erase_info *erase)
rc = -EIO;
if (rc) {
- printk(KERN_NOTICE PREFIX "'%s': unable to write RFD "
+ printk(KERN_ERR PREFIX "'%s': unable to write RFD "
"header at 0x%lx\n",
part->mbd.mtd->name,
part->blocks[i].offset);
@@ -348,7 +347,7 @@ static int erase_block(struct partition *part, int block)
rc = part->mbd.mtd->erase(part->mbd.mtd, erase);
if (rc) {
- printk(KERN_WARNING PREFIX "erase of region %x,%x on '%s' "
+ printk(KERN_ERR PREFIX "erase of region %x,%x on '%s' "
"failed\n", erase->addr, erase->len,
part->mbd.mtd->name);
kfree(erase);
@@ -383,7 +382,7 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old
rc = -EIO;
if (rc) {
- printk(KERN_NOTICE PREFIX "error reading '%s' at "
+ printk(KERN_ERR PREFIX "error reading '%s' at "
"0x%lx\n", part->mbd.mtd->name,
part->blocks[block_no].offset);
@@ -423,7 +422,7 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old
rc = -EIO;
if (rc) {
- printk(KERN_NOTICE PREFIX "'%s': Unable to "
+ printk(KERN_ERR PREFIX "'%s': Unable to "
"read sector for relocation\n",
part->mbd.mtd->name);
@@ -520,7 +519,7 @@ static int reclaim_block(struct partition *part, u_long *old_sector)
* because if we fill that one up first it'll have the most chance of having
* the least live sectors at reclaim.
*/
-static int find_free_block(const struct partition *part)
+static int find_free_block(struct partition *part)
{
int block, stop;
@@ -533,6 +532,9 @@ static int find_free_block(const struct partition *part)
block != part->reserved_block)
return block;
+ if (part->blocks[block].state == BLOCK_UNUSED)
+ erase_block(part, block);
+
if (++block >= part->total_blocks)
block = 0;
@@ -541,7 +543,7 @@ static int find_free_block(const struct partition *part)
return -1;
}
-static int find_writeable_block(struct partition *part, u_long *old_sector)
+static int find_writable_block(struct partition *part, u_long *old_sector)
{
int rc, block;
size_t retlen;
@@ -570,7 +572,7 @@ static int find_writeable_block(struct partition *part, u_long *old_sector)
rc = -EIO;
if (rc) {
- printk(KERN_NOTICE PREFIX "'%s': unable to read header at "
+ printk(KERN_ERR PREFIX "'%s': unable to read header at "
"0x%lx\n", part->mbd.mtd->name,
part->blocks[block].offset);
goto err;
@@ -602,7 +604,7 @@ static int mark_sector_deleted(struct partition *part, u_long old_addr)
rc = -EIO;
if (rc) {
- printk(KERN_WARNING PREFIX "error writing '%s' at "
+ printk(KERN_ERR PREFIX "error writing '%s' at "
"0x%lx\n", part->mbd.mtd->name, addr);
if (rc)
goto err;
@@ -652,7 +654,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
if (part->current_block == -1 ||
!part->blocks[part->current_block].free_sectors) {
- rc = find_writeable_block(part, old_addr);
+ rc = find_writable_block(part, old_addr);
if (rc)
goto err;
}
@@ -675,7 +677,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
rc = -EIO;
if (rc) {
- printk(KERN_WARNING PREFIX "error writing '%s' at 0x%lx\n",
+ printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
part->mbd.mtd->name, addr);
if (rc)
goto err;
@@ -695,7 +697,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf,
rc = -EIO;
if (rc) {
- printk(KERN_WARNING PREFIX "error writing '%s' at 0x%lx\n",
+ printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
part->mbd.mtd->name, addr);
if (rc)
goto err;
@@ -776,7 +778,7 @@ static void rfd_ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
part->block_size = block_size;
else {
if (!mtd->erasesize) {
- printk(KERN_NOTICE PREFIX "please provide block_size");
+ printk(KERN_WARNING PREFIX "please provide block_size");
return;
}
else
@@ -791,8 +793,8 @@ static void rfd_ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
if (!(mtd->flags & MTD_WRITEABLE))
part->mbd.readonly = 1;
else if (part->errors) {
- printk(KERN_NOTICE PREFIX "'%s': errors found, "
- "setting read-only", mtd->name);
+ printk(KERN_WARNING PREFIX "'%s': errors found, "
+ "setting read-only\n", mtd->name);
part->mbd.readonly = 1;
}