Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 85 insertions, 0 deletions

diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
new file mode 100644
index 00000000000..d49e5ff63ca
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -0,0 +1,85 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+#include <linux/config.h>
+
+#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+#define COLLIE_GPIO_CO			GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
+#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
+#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
+#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
+#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif