Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
  MIPS: Move ptrace prototypes to ptrace.h
  MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  MIPS: Probe watch registers and report configuration.
  MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  MIPS: Add HARDWARE_WATCHPOINTS configure option.
  MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
  MIPS: TXx9: Add TX4939 ATA support (v2)
  MIPS: Rewrite spinlocks to ticket locks.
  MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
  MIPS: IP checksums: Remove unncessary .set pseudos
  MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
  MIPS: Move headfiles to new location below arch/mips/include
  MIPS: Alchemy: rename directory
  MIPS: Optimize get_user and put_user for 64-bit
  MIPS: TXx9: Implement prom_free_prom_memory
  MIPS: TXx9: Add RBTX4939 board support
  MIPS: TXx9: Add TX4939 SoC support
  ...

1 files changed, 0 insertions, 112 deletions

diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h
deleted file mode 100644
index b0bccd2c4ed..00000000000
--- a/include/asm-mips/delay.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 by Waldorf Electronics
- * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 2007  Maciej W. Rozycki
- */
-#ifndef _ASM_DELAY_H
-#define _ASM_DELAY_H
-
-#include <linux/param.h>
-#include <linux/smp.h>
-
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-static inline void __delay(unsigned long loops)
-{
-	if (sizeof(long) == 4)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	subu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && !DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, %2					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops), "r" (1));
-}
-
-
-/*
- * Division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
-	unsigned long hi, lo;
-
-	/*
-	 * The rates of 128 is rounded wrongly by the catchall case
-	 * for 64-bit.  Excessive precission?  Probably ...
-	 */
-#if defined(CONFIG_64BIT) && (HZ == 128)
-	usecs *= 0x0008637bd05af6c7UL;		/* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_64BIT)
-	usecs *= (0x8000000000000000UL / (500000 / HZ));
-#else /* 32-bit junk follows here */
-	usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
-	                           0x80000000ULL) >> 32);
-#endif
-
-	if (sizeof(long) == 4)
-		__asm__("multu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && !R4000_WAR)
-		__asm__("dmultu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && R4000_WAR)
-		__asm__("dmultu\t%3, %4\n\tmfhi\t%0"
-		: "=r" (usecs), "=h" (hi), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-
-	__delay(usecs);
-}
-
-#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
-
-#define udelay(usecs) __udelay((usecs), __udelay_val)
-
-/* make sure "usecs *= ..." in udelay do not overflow. */
-#if HZ >= 1000
-#define MAX_UDELAY_MS	1
-#elif HZ <= 200
-#define MAX_UDELAY_MS	5
-#else
-#define MAX_UDELAY_MS	(1000 / HZ)
-#endif
-
-#endif /* _ASM_DELAY_H */