Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
  MIPS: Move ptrace prototypes to ptrace.h
  MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  MIPS: Probe watch registers and report configuration.
  MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  MIPS: Add HARDWARE_WATCHPOINTS configure option.
  MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
  MIPS: TXx9: Add TX4939 ATA support (v2)
  MIPS: Rewrite spinlocks to ticket locks.
  MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
  MIPS: IP checksums: Remove unncessary .set pseudos
  MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
  MIPS: Move headfiles to new location below arch/mips/include
  MIPS: Alchemy: rename directory
  MIPS: Optimize get_user and put_user for 64-bit
  MIPS: TXx9: Implement prom_free_prom_memory
  MIPS: TXx9: Add RBTX4939 board support
  MIPS: TXx9: Add TX4939 SoC support
  ...

1 files changed, 0 insertions, 95 deletions

diff --git a/include/asm-mips/jazzdma.h b/include/asm-mips/jazzdma.h
deleted file mode 100644
index 8bb37bba68f..00000000000
--- a/include/asm-mips/jazzdma.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support
- */
-#ifndef _ASM_JAZZDMA_H
-#define _ASM_JAZZDMA_H
-
-/*
- * Prototypes and macros
- */
-extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
-extern int vdma_free(unsigned long laddr);
-extern int vdma_remap(unsigned long laddr, unsigned long paddr,
-                      unsigned long size);
-extern unsigned long vdma_phys2log(unsigned long paddr);
-extern unsigned long vdma_log2phys(unsigned long laddr);
-extern void vdma_stats(void);		/* for debugging only */
-
-extern void vdma_enable(int channel);
-extern void vdma_disable(int channel);
-extern void vdma_set_mode(int channel, int mode);
-extern void vdma_set_addr(int channel, long addr);
-extern void vdma_set_count(int channel, int count);
-extern int vdma_get_residue(int channel);
-extern int vdma_get_enable(int channel);
-
-/*
- * some definitions used by the driver functions
- */
-#define VDMA_PAGESIZE		4096
-#define VDMA_PGTBL_ENTRIES	4096
-#define VDMA_PGTBL_SIZE		(sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES)
-#define VDMA_PAGE_EMPTY		0xff000000
-
-/*
- * Macros to get page no. and offset of a given address
- * Note that VDMA_PAGE() works for physical addresses only
- */
-#define VDMA_PAGE(a)            ((unsigned int)(a) >> 12)
-#define VDMA_OFFSET(a)          ((unsigned int)(a) & (VDMA_PAGESIZE-1))
-
-/*
- * error code returned by vdma_alloc()
- * (See also arch/mips/kernel/jazzdma.c)
- */
-#define VDMA_ERROR              0xffffffff
-
-/*
- * VDMA pagetable entry description
- */
-typedef volatile struct VDMA_PGTBL_ENTRY {
-	unsigned int frame;		/* physical frame no. */
-	unsigned int owner;		/* owner of this entry (0=free) */
-} VDMA_PGTBL_ENTRY;
-
-
-/*
- * DMA channel control registers
- * in the R4030 MCT_ADR chip
- */
-#define JAZZ_R4030_CHNL_MODE	0xE0000100	/* 8 DMA Channel Mode Registers, */
-						/* 0xE0000100,120,140... */
-#define JAZZ_R4030_CHNL_ENABLE  0xE0000108	/* 8 DMA Channel Enable Regs, */
-						/* 0xE0000108,128,148... */
-#define JAZZ_R4030_CHNL_COUNT   0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
-						/* 0xE0000110,130,150... */
-#define JAZZ_R4030_CHNL_ADDR	0xE0000118	/* 8 DMA Channel Address Regs, */
-						/* 0xE0000118,138,158... */
-
-/* channel enable register bits */
-
-#define R4030_CHNL_ENABLE        (1<<0)
-#define R4030_CHNL_WRITE         (1<<1)
-#define R4030_TC_INTR            (1<<8)
-#define R4030_MEM_INTR           (1<<9)
-#define R4030_ADDR_INTR          (1<<10)
-
-/*
- * Channel mode register bits
- */
-#define R4030_MODE_ATIME_40      (0) /* device access time on remote bus */
-#define R4030_MODE_ATIME_80      (1)
-#define R4030_MODE_ATIME_120     (2)
-#define R4030_MODE_ATIME_160     (3)
-#define R4030_MODE_ATIME_200     (4)
-#define R4030_MODE_ATIME_240     (5)
-#define R4030_MODE_ATIME_280     (6)
-#define R4030_MODE_ATIME_320     (7)
-#define R4030_MODE_WIDTH_8       (1<<3)	/* device data bus width */
-#define R4030_MODE_WIDTH_16      (2<<3)
-#define R4030_MODE_WIDTH_32      (3<<3)
-#define R4030_MODE_INTR_EN       (1<<5)
-#define R4030_MODE_BURST         (1<<6)	/* Rev. 2 only */
-#define R4030_MODE_FAST_ACK      (1<<7)	/* Rev. 2 only */
-
-#endif /* _ASM_JAZZDMA_H */