diff options
author | Ingo Molnar <mingo@elte.hu> | 2008-10-24 12:48:46 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2008-10-24 12:48:46 +0200 |
commit | 8c82a17e9c924c0e9f13e75e4c2f6bca19a4b516 (patch) | |
tree | d535f46a917e14e90deccb29ad00aac016ad18dd /include/asm-parisc/dma.h | |
parent | 4ce72a2c063a7fa8e42a9435440ae3364115a58d (diff) | |
parent | 57f8f7b60db6f1ed2c6918ab9230c4623a9dbe37 (diff) |
Merge commit 'v2.6.28-rc1' into sched/urgent
Diffstat (limited to 'include/asm-parisc/dma.h')
-rw-r--r-- | include/asm-parisc/dma.h | 186 |
1 files changed, 0 insertions, 186 deletions
diff --git a/include/asm-parisc/dma.h b/include/asm-parisc/dma.h deleted file mode 100644 index 31ad0f05af3..00000000000 --- a/include/asm-parisc/dma.h +++ /dev/null @@ -1,186 +0,0 @@ -/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $ - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - * (c) Copyright 2000, Grant Grundler - */ - -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#include <asm/io.h> /* need byte IO */ -#include <asm/system.h> - -#define dma_outb outb -#define dma_inb inb - -/* -** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up -** (or rather not merge) DMAs into manageable chunks. -** On parisc, this is more of the software/tuning constraint -** rather than the HW. I/O MMU allocation algorithms can be -** faster with smaller sizes (to some degree). -*/ -#define DMA_CHUNK_SIZE (BITS_PER_LONG*PAGE_SIZE) - -/* The maximum address that we can perform a DMA transfer to on this platform -** New dynamic DMA interfaces should obsolete this.... -*/ -#define MAX_DMA_ADDRESS (~0UL) - -/* -** We don't have DMA channels... well V-class does but the -** Dynamic DMA Mapping interface will support them... right? :^) -** Note: this is not relevant right now for PA-RISC, but we cannot -** leave this as undefined because some things (e.g. sound) -** won't compile :-( -*/ -#define MAX_DMA_CHANNELS 8 -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ -#define DMA1_EXT_MODE_REG (0x400 | DMA1_MODE_REG) - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ -#define DMA2_EXT_MODE_REG (0x400 | DMA2_MODE_REG) - -static __inline__ unsigned long claim_dma_lock(void) -{ - return 0; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ -#ifdef CONFIG_SUPERIO - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -#endif -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ -#ifdef CONFIG_SUPERIO - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -#endif -} - -/* reserve a DMA channel */ -#define request_dma(dmanr, device_id) (0) - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) -{ -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ -} - - -#define free_dma(dmanr) - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ |