diff options
author | Ingo Molnar <mingo@elte.hu> | 2008-10-24 12:48:46 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2008-10-24 12:48:46 +0200 |
commit | 8c82a17e9c924c0e9f13e75e4c2f6bca19a4b516 (patch) | |
tree | d535f46a917e14e90deccb29ad00aac016ad18dd /include/asm-parisc/pci.h | |
parent | 4ce72a2c063a7fa8e42a9435440ae3364115a58d (diff) | |
parent | 57f8f7b60db6f1ed2c6918ab9230c4623a9dbe37 (diff) |
Merge commit 'v2.6.28-rc1' into sched/urgent
Diffstat (limited to 'include/asm-parisc/pci.h')
-rw-r--r-- | include/asm-parisc/pci.h | 294 |
1 files changed, 0 insertions, 294 deletions
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h deleted file mode 100644 index 4ba868f44a5..00000000000 --- a/include/asm-parisc/pci.h +++ /dev/null @@ -1,294 +0,0 @@ -#ifndef __ASM_PARISC_PCI_H -#define __ASM_PARISC_PCI_H - -#include <asm/scatterlist.h> - - - -/* -** HP PCI platforms generally support multiple bus adapters. -** (workstations 1-~4, servers 2-~32) -** -** Newer platforms number the busses across PCI bus adapters *sparsely*. -** E.g. 0, 8, 16, ... -** -** Under a PCI bus, most HP platforms support PPBs up to two or three -** levels deep. See "Bit3" product line. -*/ -#define PCI_MAX_BUSSES 256 - - -/* To be used as: mdelay(pci_post_reset_delay); - * - * post_reset is the time the kernel should stall to prevent anyone from - * accessing the PCI bus once #RESET is de-asserted. - * PCI spec somewhere says 1 second but with multi-PCI bus systems, - * this makes the boot time much longer than necessary. - * 20ms seems to work for all the HP PCI implementations to date. - */ -#define pci_post_reset_delay 50 - - -/* -** pci_hba_data (aka H2P_OBJECT in HP/UX) -** -** This is the "common" or "base" data structure which HBA drivers -** (eg Dino or LBA) are required to place at the top of their own -** platform_data structure. I've heard this called "C inheritance" too. -** -** Data needed by pcibios layer belongs here. -*/ -struct pci_hba_data { - void __iomem *base_addr; /* aka Host Physical Address */ - const struct parisc_device *dev; /* device from PA bus walk */ - struct pci_bus *hba_bus; /* primary PCI bus below HBA */ - int hba_num; /* I/O port space access "key" */ - struct resource bus_num; /* PCI bus numbers */ - struct resource io_space; /* PIOP */ - struct resource lmmio_space; /* bus addresses < 4Gb */ - struct resource elmmio_space; /* additional bus addresses < 4Gb */ - struct resource gmmio_space; /* bus addresses > 4Gb */ - - /* NOTE: Dino code assumes it can use *all* of the lmmio_space, - * elmmio_space and gmmio_space as a contiguous array of - * resources. This #define represents the array size */ - #define DINO_MAX_LMMIO_RESOURCES 3 - - unsigned long lmmio_space_offset; /* CPU view - PCI view */ - void * iommu; /* IOMMU this device is under */ - /* REVISIT - spinlock to protect resources? */ - - #define HBA_NAME_SIZE 16 - char io_name[HBA_NAME_SIZE]; - char lmmio_name[HBA_NAME_SIZE]; - char elmmio_name[HBA_NAME_SIZE]; - char gmmio_name[HBA_NAME_SIZE]; -}; - -#define HBA_DATA(d) ((struct pci_hba_data *) (d)) - -/* -** We support 2^16 I/O ports per HBA. These are set up in the form -** 0xbbxxxx, where bb is the bus number and xxxx is the I/O port -** space address. -*/ -#define HBA_PORT_SPACE_BITS 16 - -#define HBA_PORT_BASE(h) ((h) << HBA_PORT_SPACE_BITS) -#define HBA_PORT_SPACE_SIZE (1UL << HBA_PORT_SPACE_BITS) - -#define PCI_PORT_HBA(a) ((a) >> HBA_PORT_SPACE_BITS) -#define PCI_PORT_ADDR(a) ((a) & (HBA_PORT_SPACE_SIZE - 1)) - -#ifdef CONFIG_64BIT -#define PCI_F_EXTEND 0xffffffff00000000UL -#define PCI_IS_LMMIO(hba,a) pci_is_lmmio(hba,a) - -/* We need to know if an address is LMMMIO or GMMIO. - * LMMIO requires mangling and GMMIO we must use as-is. - */ -static __inline__ int pci_is_lmmio(struct pci_hba_data *hba, unsigned long a) -{ - return(((a) & PCI_F_EXTEND) == PCI_F_EXTEND); -} - -/* -** Convert between PCI (IO_VIEW) addresses and processor (PA_VIEW) addresses. -** See pci.c for more conversions used by Generic PCI code. -** -** Platform characteristics/firmware guarantee that -** (1) PA_VIEW - IO_VIEW = lmmio_offset for both LMMIO and ELMMIO -** (2) PA_VIEW == IO_VIEW for GMMIO -*/ -#define PCI_BUS_ADDR(hba,a) (PCI_IS_LMMIO(hba,a) \ - ? ((a) - hba->lmmio_space_offset) /* mangle LMMIO */ \ - : (a)) /* GMMIO */ -#define PCI_HOST_ADDR(hba,a) (((a) & PCI_F_EXTEND) == 0 \ - ? (a) + hba->lmmio_space_offset \ - : (a)) - -#else /* !CONFIG_64BIT */ - -#define PCI_BUS_ADDR(hba,a) (a) -#define PCI_HOST_ADDR(hba,a) (a) -#define PCI_F_EXTEND 0UL -#define PCI_IS_LMMIO(hba,a) (1) /* 32-bit doesn't support GMMIO */ - -#endif /* !CONFIG_64BIT */ - -/* -** KLUGE: linux/pci.h include asm/pci.h BEFORE declaring struct pci_bus -** (This eliminates some of the warnings). -*/ -struct pci_bus; -struct pci_dev; - -/* - * If the PCI device's view of memory is the same as the CPU's view of memory, - * PCI_DMA_BUS_IS_PHYS is true. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#ifdef CONFIG_PA20 -/* All PA-2.0 machines have an IOMMU. */ -#define PCI_DMA_BUS_IS_PHYS 0 -#define parisc_has_iommu() do { } while (0) -#else - -#if defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA) -extern int parisc_bus_is_phys; /* in arch/parisc/kernel/setup.c */ -#define PCI_DMA_BUS_IS_PHYS parisc_bus_is_phys -#define parisc_has_iommu() do { parisc_bus_is_phys = 0; } while (0) -#else -#define PCI_DMA_BUS_IS_PHYS 1 -#define parisc_has_iommu() do { } while (0) -#endif - -#endif /* !CONFIG_PA20 */ - - -/* -** Most PCI devices (eg Tulip, NCR720) also export the same registers -** to both MMIO and I/O port space. Due to poor performance of I/O Port -** access under HP PCI bus adapters, strongly recommend the use of MMIO -** address space. -** -** While I'm at it more PA programming notes: -** -** 1) MMIO stores (writes) are posted operations. This means the processor -** gets an "ACK" before the write actually gets to the device. A read -** to the same device (or typically the bus adapter above it) will -** force in-flight write transaction(s) out to the targeted device -** before the read can complete. -** -** 2) The Programmed I/O (PIO) data may not always be strongly ordered with -** respect to DMA on all platforms. Ie PIO data can reach the processor -** before in-flight DMA reaches memory. Since most SMP PA platforms -** are I/O coherent, it generally doesn't matter...but sometimes -** it does. -** -** I've helped device driver writers debug both types of problems. -*/ -struct pci_port_ops { - u8 (*inb) (struct pci_hba_data *hba, u16 port); - u16 (*inw) (struct pci_hba_data *hba, u16 port); - u32 (*inl) (struct pci_hba_data *hba, u16 port); - void (*outb) (struct pci_hba_data *hba, u16 port, u8 data); - void (*outw) (struct pci_hba_data *hba, u16 port, u16 data); - void (*outl) (struct pci_hba_data *hba, u16 port, u32 data); -}; - - -struct pci_bios_ops { - void (*init)(void); - void (*fixup_bus)(struct pci_bus *bus); -}; - -/* pci_unmap_{single,page} is not a nop, thus... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -/* -** Stuff declared in arch/parisc/kernel/pci.c -*/ -extern struct pci_port_ops *pci_port; -extern struct pci_bios_ops *pci_bios; - -#ifdef CONFIG_PCI -extern void pcibios_register_hba(struct pci_hba_data *); -extern void pcibios_set_master(struct pci_dev *); -#else -static inline void pcibios_register_hba(struct pci_hba_data *x) -{ -} -#endif - -/* - * pcibios_assign_all_busses() is used in drivers/pci/pci.c:pci_do_scan_bus() - * 0 == check if bridge is numbered before re-numbering. - * 1 == pci_do_scan_bus() should automatically number all PCI-PCI bridges. - * - * We *should* set this to zero for "legacy" platforms and one - * for PAT platforms. - * - * But legacy platforms also need to renumber the busses below a Host - * Bus controller. Adding a 4-port Tulip card on the first PCI root - * bus of a C200 resulted in the secondary bus being numbered as 1. - * The second PCI host bus controller's root bus had already been - * assigned bus number 1 by firmware and sysfs complained. - * - * Firmware isn't doing anything wrong here since each controller - * is its own PCI domain. It's simpler and easier for us to renumber - * the busses rather than treat each Dino as a separate PCI domain. - * Eventually, we may want to introduce PCI domains for Superdome or - * rp7420/8420 boxes and then revisit this issue. - */ -#define pcibios_assign_all_busses() (1) -#define pcibios_scan_all_fns(a, b) (0) - -#define PCIBIOS_MIN_IO 0x10 -#define PCIBIOS_MIN_MEM 0x1000 /* NBPG - but pci/setup-res.c dies */ - -/* export the pci_ DMA API in terms of the dma_ one */ -#include <asm-generic/pci-dma-compat.h> - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - unsigned long cacheline_size; - u8 byte; - - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - *strat = PCI_DMA_BURST_MULTIPLE; - *strategy_parameter = cacheline_size; -} -#endif - -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't need to penalize isa irq's */ -} - -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return channel ? 15 : 14; -} - -#endif /* __ASM_PARISC_PCI_H */ |