aboutsummaryrefslogtreecommitdiff
path: root/include/asm-ppc
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2005-10-20 20:53:39 +1000
committerPaul Mackerras <paulus@samba.org>2005-10-20 20:53:39 +1000
commitff065ddd96c233d27322de493fa023357939c888 (patch)
treeb60d8a362dea386d1cec91422fd18f92da244ffd /include/asm-ppc
parent0dd194d02d2584c34e06ddd26c7a7896a5fa1974 (diff)
powerpc: Merge various powermac-related header files.
Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all of these moved from asm-ppc to asm-powerpc. In each case the asm-ppc64 version (if there was one) was just a single line including the asm-ppc version. Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'include/asm-ppc')
-rw-r--r--include/asm-ppc/dbdma.h102
-rw-r--r--include/asm-ppc/heathrow.h62
-rw-r--r--include/asm-ppc/keylargo.h248
-rw-r--r--include/asm-ppc/macio.h140
-rw-r--r--include/asm-ppc/mediabay.h31
-rw-r--r--include/asm-ppc/ohare.h48
-rw-r--r--include/asm-ppc/pmac_feature.h380
-rw-r--r--include/asm-ppc/pmac_low_i2c.h43
-rw-r--r--include/asm-ppc/uninorth.h229
9 files changed, 0 insertions, 1283 deletions
diff --git a/include/asm-ppc/dbdma.h b/include/asm-ppc/dbdma.h
deleted file mode 100644
index 8973565f95d..00000000000
--- a/include/asm-ppc/dbdma.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Definitions for using the Apple Descriptor-Based DMA controller
- * in Power Macintosh computers.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#ifdef __KERNEL__
-#ifndef _ASM_DBDMA_H_
-#define _ASM_DBDMA_H_
-/*
- * DBDMA control/status registers. All little-endian.
- */
-struct dbdma_regs {
- unsigned int control; /* lets you change bits in status */
- unsigned int status; /* DMA and device status bits (see below) */
- unsigned int cmdptr_hi; /* upper 32 bits of command address */
- unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */
- unsigned int intr_sel; /* select interrupt condition bit */
- unsigned int br_sel; /* select branch condition bit */
- unsigned int wait_sel; /* select wait condition bit */
- unsigned int xfer_mode;
- unsigned int data2ptr_hi;
- unsigned int data2ptr;
- unsigned int res1;
- unsigned int address_hi;
- unsigned int br_addr_hi;
- unsigned int res2[3];
-};
-
-/* Bits in control and status registers */
-#define RUN 0x8000
-#define PAUSE 0x4000
-#define FLUSH 0x2000
-#define WAKE 0x1000
-#define DEAD 0x0800
-#define ACTIVE 0x0400
-#define BT 0x0100
-#define DEVSTAT 0x00ff
-
-/*
- * DBDMA command structure. These fields are all little-endian!
- */
-struct dbdma_cmd {
- unsigned short req_count; /* requested byte transfer count */
- unsigned short command; /* command word (has bit-fields) */
- unsigned int phy_addr; /* physical data address */
- unsigned int cmd_dep; /* command-dependent field */
- unsigned short res_count; /* residual count after completion */
- unsigned short xfer_status; /* transfer status */
-};
-
-/* DBDMA command values in command field */
-#define OUTPUT_MORE 0 /* transfer memory data to stream */
-#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
-#define INPUT_MORE 0x2000 /* transfer stream data to memory */
-#define INPUT_LAST 0x3000 /* ditto, expect end marker */
-#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */
-#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */
-#define DBDMA_NOP 0x6000 /* do nothing */
-#define DBDMA_STOP 0x7000 /* suspend processing */
-
-/* Key values in command field */
-#define KEY_STREAM0 0 /* usual data stream */
-#define KEY_STREAM1 0x100 /* control/status stream */
-#define KEY_STREAM2 0x200 /* device-dependent stream */
-#define KEY_STREAM3 0x300 /* device-dependent stream */
-#define KEY_REGS 0x500 /* device register space */
-#define KEY_SYSTEM 0x600 /* system memory-mapped space */
-#define KEY_DEVICE 0x700 /* device memory-mapped space */
-
-/* Interrupt control values in command field */
-#define INTR_NEVER 0 /* don't interrupt */
-#define INTR_IFSET 0x10 /* intr if condition bit is 1 */
-#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */
-#define INTR_ALWAYS 0x30 /* always interrupt */
-
-/* Branch control values in command field */
-#define BR_NEVER 0 /* don't branch */
-#define BR_IFSET 0x4 /* branch if condition bit is 1 */
-#define BR_IFCLR 0x8 /* branch if condition bit is 0 */
-#define BR_ALWAYS 0xc /* always branch */
-
-/* Wait control values in command field */
-#define WAIT_NEVER 0 /* don't wait */
-#define WAIT_IFSET 1 /* wait if condition bit is 1 */
-#define WAIT_IFCLR 2 /* wait if condition bit is 0 */
-#define WAIT_ALWAYS 3 /* always wait */
-
-/* Align an address for a DBDMA command structure */
-#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \
- & -sizeof(struct dbdma_cmd))
-
-/* Useful macros */
-#define DBDMA_DO_STOP(regs) do { \
- out_le32(&((regs)->control), (RUN|FLUSH)<<16); \
- while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \
- ; \
-} while(0)
-
-#endif /* _ASM_DBDMA_H_ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/heathrow.h b/include/asm-ppc/heathrow.h
deleted file mode 100644
index 22ac179856b..00000000000
--- a/include/asm-ppc/heathrow.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
- *
- * Grabbed from Open Firmware definitions on a PowerBook G3 Series
- *
- * Copyright (C) 1997 Paul Mackerras.
- */
-
-/* Front light color on Yikes/B&W G3. 32 bits */
-#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */
-
-/* Brightness/contrast (gossamer iMac ?). 8 bits */
-#define HEATHROW_BRIGHTNESS_CNTL 0x32
-#define HEATHROW_CONTRAST_CNTL 0x33
-
-/* offset from ohare base for feature control register */
-#define HEATHROW_MBCR 0x34 /* Media bay control */
-#define HEATHROW_FCR 0x38 /* Feature control */
-#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */
-
-/*
- * Bits in feature control register.
- * Bits postfixed with a _N are in inverse logic
- */
-#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */
-#define HRW_BAY_POWER_N 0x00000002
-#define HRW_BAY_PCI_ENABLE 0x00000004
-#define HRW_BAY_IDE_ENABLE 0x00000008
-#define HRW_BAY_FLOPPY_ENABLE 0x00000010
-#define HRW_IDE0_ENABLE 0x00000020
-#define HRW_IDE0_RESET_N 0x00000040
-#define HRW_BAY_DEV_MASK 0x0000001c
-#define HRW_BAY_RESET_N 0x00000080
-#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */
-#define HRW_SCC_ENABLE 0x00000200
-#define HRW_MESH_ENABLE 0x00000400
-#define HRW_SWIM_ENABLE 0x00000800
-#define HRW_SOUND_POWER_N 0x00001000
-#define HRW_SOUND_CLK_ENABLE 0x00002000
-#define HRW_SCCA_IO 0x00004000
-#define HRW_SCCB_IO 0x00008000
-#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */
-#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */
-#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */
-#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */
-#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */
-#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */
-#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */
-#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */
-#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */
-#define HRW_RESET_SCC 0x02000000
-#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */
-#define HRW_USE_MFDC 0x08000000 /* ??? (0) */
-#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */
-#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */
-
-/* We OR those features at boot on desktop G3s */
-#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
-
-/* Looks like Heathrow has some sort of GPIOs as well... */
-#define HRW_GPIO_MODEM_RESET 0x6d
-
diff --git a/include/asm-ppc/keylargo.h b/include/asm-ppc/keylargo.h
deleted file mode 100644
index a669a3f0f5a..00000000000
--- a/include/asm-ppc/keylargo.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
- *
- */
-
-/* "Pangea" chipset has keylargo device-id 0x25 while core99
- * has device-id 0x22. The rev. of the pangea one is 0, so we
- * fake an artificial rev. in keylargo_rev by oring 0x100
- */
-#define KL_PANGEA_REV 0x100
-
-/* offset from base for feature control registers */
-#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */
-#define KEYLARGO_FCR0 0x38
-#define KEYLARGO_FCR1 0x3c
-#define KEYLARGO_FCR2 0x40
-#define KEYLARGO_FCR3 0x44
-#define KEYLARGO_FCR4 0x48
-#define KEYLARGO_FCR5 0x4c /* Pangea only */
-
-/* K2 aditional FCRs */
-#define K2_FCR6 0x34
-#define K2_FCR7 0x30
-#define K2_FCR8 0x2c
-#define K2_FCR9 0x28
-#define K2_FCR10 0x24
-
-/* GPIO registers */
-#define KEYLARGO_GPIO_LEVELS0 0x50
-#define KEYLARGO_GPIO_LEVELS1 0x54
-#define KEYLARGO_GPIO_EXTINT_0 0x58
-#define KEYLARGO_GPIO_EXTINT_CNT 18
-#define KEYLARGO_GPIO_0 0x6A
-#define KEYLARGO_GPIO_CNT 17
-#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80
-#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04
-#define KEYLARGO_GPIO_OUTOUT_DATA 0x01
-#define KEYLARGO_GPIO_INPUT_DATA 0x02
-
-/* K2 does only extint GPIOs and does 51 of them */
-#define K2_GPIO_EXTINT_0 0x58
-#define K2_GPIO_EXTINT_CNT 51
-
-/* Specific GPIO regs */
-
-#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03)
-#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */
-
-#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05)
-
-/* Hrm... this one is only to be used on Pismo. It seeem to also
- * control the timebase enable on other machines. Still to be
- * experimented... --BenH.
- */
-#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09)
-#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09)
-
-#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10)
-
-#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a)
-#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04
-#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38
-
-#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03)
-#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04)
-#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f)
-#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10)
-
-#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09)
-#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA
-
-#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e)
-
-#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a)
-#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d)
-#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d)
-#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e)
-#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f)
-
-/*
- * Bits in feature control register. Those bits different for K2 are
- * listed separately
- */
-#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */
-#define KL_MBCR_MB0_IDE_ENABLE 0x00001000
-#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */
-#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */
-#define KL_MBCR_MB0_DEV_MASK 0x00007800
-#define KL_MBCR_MB0_DEV_POWER 0x00000400
-#define KL_MBCR_MB0_DEV_RESET 0x00000200
-#define KL_MBCR_MB0_ENABLE 0x00000100
-#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */
-#define KL_MBCR_MB1_IDE_ENABLE 0x10000000
-#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */
-#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */
-#define KL_MBCR_MB1_DEV_MASK 0x78000000
-#define KL_MBCR_MB1_DEV_POWER 0x04000000
-#define KL_MBCR_MB1_DEV_RESET 0x02000000
-#define KL_MBCR_MB1_ENABLE 0x01000000
-
-#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */
-#define KL0_SCC_A_INTF_ENABLE 0x00000002
-#define KL0_SCC_SLOWPCLK 0x00000004
-#define KL0_SCC_RESET 0x00000008
-#define KL0_SCCA_ENABLE 0x00000010
-#define KL0_SCCB_ENABLE 0x00000020
-#define KL0_SCC_CELL_ENABLE 0x00000040
-#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */
-#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */
-#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */
-#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */
-#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */
-#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */
-#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */
-#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */
-#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */
-#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */
-#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */
-#define KL0_USB0_PAD_SUSPEND0 0x00040000
-#define KL0_USB0_PAD_SUSPEND1 0x00080000
-#define KL0_USB0_CELL_ENABLE 0x00100000
-#define KL0_USB1_PAD_SUSPEND0 0x00400000
-#define KL0_USB1_PAD_SUSPEND1 0x00800000
-#define KL0_USB1_CELL_ENABLE 0x01000000
-#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */
-
-#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \
- KL0_SCC_SLOWPCLK | \
- KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
-
-#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */
-#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */
-#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */
-#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */
-#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */
-#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */
-#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */
-#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */
-#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */
-#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */
-#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */
-#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */
-#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */
-#define KL1_I2S0_CELL_ENABLE 0x00000400
-#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000
-#define KL1_I2S0_ENABLE 0x00002000
-#define KL1_I2S1_CELL_ENABLE 0x00020000
-#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000
-#define KL1_I2S1_ENABLE 0x00100000
-#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */
-#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */
-#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */
-#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */
-#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */
-#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */
-
-#define KL2_IOBUS_ENABLE 0x00000002
-#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */
-#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */
-#define KL2_MPIC_ENABLE 0x00020000
-#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */
-#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */
-#define KL2_MEM_IS_BIG 0x04000000
-#define KL2_CARDSEL_16 0x08000000
-
-#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */
-#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */
-#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */
-#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */
-#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */
-#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */
-#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */
-#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */
-#define KL3_CLK49_ENABLE 0x00000200
-#define KL3_CLK45_ENABLE 0x00000400
-#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */
-#define KL3_TIMER_CLK18_ENABLE 0x00001000
-#define KL3_I2S1_CLK18_ENABLE 0x00002000
-#define KL3_I2S0_CLK18_ENABLE 0x00004000
-#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */
-#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */
-#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */
-#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */
-
-/* Intrepid USB bus 2, port 0,1 */
-#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3))
-#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3))
-#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3))
-#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3))
-#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3))
-#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3))
-#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3))
-
-/* Port 0,1 : bus 0, port 2,3 : bus 1 */
-#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3))
-#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3))
-#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3))
-#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3))
-#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3))
-#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3))
-#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3))
-
-/* Pangea and Intrepid only */
-#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */
-#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */
-#define KL5_PWM_CLK32_EN 0x00000004
-#define KL5_CLK3_68_EN 0x00000010
-#define KL5_CLK32_EN 0x00000020
-
-
-/* K2 definitions */
-#define K2_FCR0_USB0_SWRESET 0x00200000
-#define K2_FCR0_USB1_SWRESET 0x02000000
-#define K2_FCR0_RING_PME_DISABLE 0x08000000
-
-#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010
-#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020
-#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400
-#define K2_FCR1_I2S0_RESET 0x00000800
-#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000
-#define K2_FCR1_I2S0_ENABLE 0x00002000
-
-#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000
-#define K2_FCR1_FW_CLK_ENABLE 0x00008000
-#define K2_FCR1_FW_RESET_N 0x00010000
-#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000
-#define K2_FCR1_GMAC_POWER_DOWN 0x00800000
-#define K2_FCR1_GMAC_RESET_N 0x01000000
-#define K2_FCR1_SATA_CLK_ENABLE 0x02000000
-#define K2_FCR1_SATA_POWER_DOWN 0x04000000
-#define K2_FCR1_SATA_RESET_N 0x08000000
-#define K2_FCR1_UATA_CLK_ENABLE 0x10000000
-#define K2_FCR1_UATA_RESET_N 0x40000000
-#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000
-
diff --git a/include/asm-ppc/macio.h b/include/asm-ppc/macio.h
deleted file mode 100644
index b553dd4b139..00000000000
--- a/include/asm-ppc/macio.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef __MACIO_ASIC_H__
-#define __MACIO_ASIC_H__
-
-#include <asm/of_device.h>
-
-extern struct bus_type macio_bus_type;
-
-/* MacIO device driver is defined later */
-struct macio_driver;
-struct macio_chip;
-
-#define MACIO_DEV_COUNT_RESOURCES 8
-#define MACIO_DEV_COUNT_IRQS 8
-
-/*
- * the macio_bus structure is used to describe a "virtual" bus
- * within a MacIO ASIC. It's typically provided by a macio_pci_asic
- * PCI device, but could be provided differently as well (nubus
- * machines using a fake OF tree).
- *
- * The pdev field can be NULL on non-PCI machines
- */
-struct macio_bus
-{
- struct macio_chip *chip; /* macio_chip (private use) */
- int index; /* macio chip index in system */
-#ifdef CONFIG_PCI
- struct pci_dev *pdev; /* PCI device hosting this bus */
-#endif
-};
-
-/*
- * the macio_dev structure is used to describe a device
- * within an Apple MacIO ASIC.
- */
-struct macio_dev
-{
- struct macio_bus *bus; /* macio bus this device is on */
- struct macio_dev *media_bay; /* Device is part of a media bay */
- struct of_device ofdev;
- int n_resources;
- struct resource resource[MACIO_DEV_COUNT_RESOURCES];
- int n_interrupts;
- struct resource interrupt[MACIO_DEV_COUNT_IRQS];
-};
-#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
-#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
-
-extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
-extern void macio_dev_put(struct macio_dev *dev);
-
-/*
- * Accessors to resources & interrupts and other device
- * fields
- */
-
-static inline int macio_resource_count(struct macio_dev *dev)
-{
- return dev->n_resources;
-}
-
-static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
-{
- return dev->resource[resource_no].start;
-}
-
-static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
-{
- return dev->resource[resource_no].end;
-}
-
-static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
-{
- struct resource *res = &dev->resource[resource_no];
- if (res->start == 0 || res->end == 0 || res->end < res->start)
- return 0;
- return res->end - res->start + 1;
-}
-
-extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
-extern void macio_release_resource(struct macio_dev *dev, int resource_no);
-extern int macio_request_resources(struct macio_dev *dev, const char *name);
-extern void macio_release_resources(struct macio_dev *dev);
-
-static inline int macio_irq_count(struct macio_dev *dev)
-{
- return dev->n_interrupts;
-}
-
-static inline int macio_irq(struct macio_dev *dev, int irq_no)
-{
- return dev->interrupt[irq_no].start;
-}
-
-static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
-{
- dev_set_drvdata(&dev->ofdev.dev, data);
-}
-
-static inline void* macio_get_drvdata(struct macio_dev *dev)
-{
- return dev_get_drvdata(&dev->ofdev.dev);
-}
-
-static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
-{
- return mdev->ofdev.node;
-}
-
-#ifdef CONFIG_PCI
-static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
-{
- return mdev->bus->pdev;
-}
-#endif
-
-/*
- * A driver for a mac-io chip based device
- */
-struct macio_driver
-{
- char *name;
- struct of_device_id *match_table;
- struct module *owner;
-
- int (*probe)(struct macio_dev* dev, const struct of_device_id *match);
- int (*remove)(struct macio_dev* dev);
-
- int (*suspend)(struct macio_dev* dev, pm_message_t state);
- int (*resume)(struct macio_dev* dev);
- int (*shutdown)(struct macio_dev* dev);
-
- struct device_driver driver;
-};
-#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
-
-extern int macio_register_driver(struct macio_driver *);
-extern void macio_unregister_driver(struct macio_driver *);
-
-#endif /* __MACIO_ASIC_H__ */
diff --git a/include/asm-ppc/mediabay.h b/include/asm-ppc/mediabay.h
deleted file mode 100644
index 9daa3252d7b..00000000000
--- a/include/asm-ppc/mediabay.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * mediabay.h: definitions for using the media bay
- * on PowerBook 3400 and similar computers.
- *
- * Copyright (C) 1997 Paul Mackerras.
- */
-#ifndef _PPC_MEDIABAY_H
-#define _PPC_MEDIABAY_H
-
-#ifdef __KERNEL__
-
-#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */
-#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */
-#define MB_SOUND 2 /* sound device ? */
-#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */
-#define MB_PCI 5 /* media bay contains a PCI device */
-#define MB_POWER 6 /* media bay contains a Power device (???) */
-#define MB_NO 7 /* media bay contains nothing */
-
-int check_media_bay(struct device_node *which_bay, int what);
-int check_media_bay_by_base(unsigned long base, int what);
-
-/* Number of bays in the machine or 0 */
-extern int media_bay_count;
-
-/* called by pmac-ide.c to register IDE controller for media bay */
-extern int media_bay_set_ide_infos(struct device_node* which_bay,
- unsigned long base, int irq, int index);
-
-#endif /* __KERNEL__ */
-#endif /* _PPC_MEDIABAY_H */
diff --git a/include/asm-ppc/ohare.h b/include/asm-ppc/ohare.h
deleted file mode 100644
index 023b5977223..00000000000
--- a/include/asm-ppc/ohare.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ohare.h: definitions for using the "O'Hare" I/O controller chip.
- *
- * Copyright (C) 1997 Paul Mackerras.
- *
- * BenH: Changed to match those of heathrow (but not all of them). Please
- * check if I didn't break anything (especially the media bay).
- */
-
-/* offset from ohare base for feature control register */
-#define OHARE_MBCR 0x34
-#define OHARE_FCR 0x38
-
-/*
- * Bits in feature control register.
- * These were mostly derived by experiment on a powerbook 3400
- * and may differ for other machines.
- */
-#define OH_SCC_RESET 1
-#define OH_BAY_POWER_N 2 /* a guess */
-#define OH_BAY_PCI_ENABLE 4 /* a guess */
-#define OH_BAY_IDE_ENABLE 8
-#define OH_BAY_FLOPPY_ENABLE 0x10
-#define OH_IDE0_ENABLE 0x20
-#define OH_IDE0_RESET_N 0x40 /* a guess */
-#define OH_BAY_DEV_MASK 0x1c
-#define OH_BAY_RESET_N 0x80
-#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */
-#define OH_SCC_ENABLE 0x200
-#define OH_MESH_ENABLE 0x400
-#define OH_FLOPPY_ENABLE 0x800
-#define OH_SCCA_IO 0x4000
-#define OH_SCCB_IO 0x8000
-#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */
-#define OH_IDE1_RESET_N 0x800000
-
-/*
- * Bits to set in the feature control register on PowerBooks.
- */
-#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \
- OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
-
-/*
- * A magic value to put into the feature control register of the
- * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
- * Contributed by Harry Eaton.
- */
-#define STARMAX_FEATURES 0xbeff7a
diff --git a/include/asm-ppc/pmac_feature.h b/include/asm-ppc/pmac_feature.h
deleted file mode 100644
index e9683bcff19..00000000000
--- a/include/asm-ppc/pmac_feature.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * Definition of platform feature hooks for PowerMacs
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Paul Mackerras &
- * Ben. Herrenschmidt.
- *
- *
- * Note: I removed media-bay details from the feature stuff, I believe it's
- * not worth it, the media-bay driver can directly use the mac-io
- * ASIC registers.
- *
- * Implementation note: Currently, none of these functions will block.
- * However, they may internally protect themselves with a spinlock
- * for way too long. Be prepared for at least some of these to block
- * in the future.
- *
- * Unless specifically defined, the result code is assumed to be an
- * error when negative, 0 is the default success result. Some functions
- * may return additional positive result values.
- *
- * To keep implementation simple, all feature calls are assumed to have
- * the prototype parameters (struct device_node* node, int value).
- * When either is not used, pass 0.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_ASM_PMAC_FEATURE_H
-#define __PPC_ASM_PMAC_FEATURE_H
-
-#include <asm/macio.h>
-#include <asm/machdep.h>
-
-/*
- * Known Mac motherboard models
- *
- * Please, report any error here to benh@kernel.crashing.org, thanks !
- *
- * Note that I don't fully maintain this list for Core99 & MacRISC2
- * and I'm considering removing all NewWorld entries from it and
- * entirely rely on the model string.
- */
-
-/* PowerSurge are the first generation of PCI Pmacs. This include
- * all of the Grand-Central based machines. We currently don't
- * differenciate most of them.
- */
-#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */
-#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */
-
-/* Here is the infamous serie of OHare based machines
- */
-#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */
-#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */
-#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */
-#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */
-#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */
-#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */
-
-/* Here are the Heathrow based machines
- * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
- */
-#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */
-#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */
-#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/
-#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */
-
-/* Here are newworld machines based on Paddington (heathrow derivative)
- */
-#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */
-#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */
-#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */
-#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */
-#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */
-
-/* Core99 machines based on UniNorth 1.0 and 1.5
- *
- * Note: A single entry here may cover several actual models according
- * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
- * FireWire based iMacs, etc...). Those machines are too similar to be
- * distinguished here, when they need to be differencied, use the
- * device-tree "model" or "compatible" property.
- */
-#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */
-#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */
-#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */
-#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */
-#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */
-#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */
-#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */
-#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */
-#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */
-#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */
-#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */
-#define PMAC_TYPE_EMAC 0x50 /* eMac */
-#define PMAC_TYPE_UNKNOWN_CORE99 0x5f
-
-/* MacRisc2 with UniNorth 2.0 */
-#define PMAC_TYPE_RACKMAC 0x80 /* XServe */
-#define PMAC_TYPE_WINDTUNNEL 0x81
-
-/* MacRISC2 machines based on the Pangea chipset
- */
-#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */
-#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */
-#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */
-#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f
-
-/* MacRISC2 machines based on the Intrepid chipset
- */
-#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */
-
-/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
- * but rather machine families
- */
-#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */
-#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */
-#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */
-#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */
-#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */
-
-/*
- * Motherboard flags
- */
-
-#define PMAC_MB_CAN_SLEEP 0x00000001
-#define PMAC_MB_HAS_FW_POWER 0x00000002
-#define PMAC_MB_OLD_CORE99 0x00000004
-#define PMAC_MB_MOBILE 0x00000008
-#define PMAC_MB_MAY_SLEEP 0x00000010
-
-/*
- * Feature calls supported on pmac
- *
- */
-
-/*
- * Use this inline wrapper
- */
-struct device_node;
-
-static inline long pmac_call_feature(int selector, struct device_node* node,
- long param, long value)
-{
- if (!ppc_md.feature_call)
- return -ENODEV;
- return ppc_md.feature_call(selector, node, param, value);
-}
-
-/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value)
- * enable/disable an SCC side. Pass the node corresponding to the
- * channel side as a parameter.
- * param is the type of port
- * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
- * for use by xmon.
- */
-#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0)
- #define PMAC_SCC_ASYNC 0
- #define PMAC_SCC_IRDA 1
- #define PMAC_SCC_I2S1 2
- #define PMAC_SCC_FLAG_XMON 0x00001000
-
-/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value)
- * enable/disable the internal modem.
- */
-#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1)
-
-/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value)
- * enable/disable the swim3 (floppy) cell of a mac-io ASIC
- */
-#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2)
-
-/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value)
- * enable/disable the mesh (scsi) cell of a mac-io ASIC
- */
-#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3)
-
-/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value)
- * enable/disable an IDE port of a mac-io ASIC
- * pass the busID parameter
- */
-#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4)
-
-/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value)
- * assert(1)/release(0) an IDE reset line (mac-io IDE only)
- */
-#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5)
-
-/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value)
- * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
- * it's reset line
- */
-#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6)
-
-/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value)
- * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
- * control the cell's clock.
- */
-#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7)
-
-/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0)
- * Perform a HW reset of the PHY connected to a gmac controller.
- * Pass the gmac device node, not the PHY node.
- */
-#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8)
-
-/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value)
- * enable/disable the sound chip, whatever it is and provided it can
- * acually be controlled
- */
-#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9)
-
-/* -- add various tweaks related to sound routing -- */
-
-/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value)
- * enable/disable the airport card
- */
-#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10)
-
-/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0)
- * toggle the reset line of a CPU on an uninorth-based SMP machine
- */
-#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11)
-
-/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value)
- * enable/disable an USB cell, along with the power of the USB "pad"
- * on keylargo based machines
- */
-#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12)
-
-/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value)
- * enable/disable the firewire cell of an uninorth ASIC.
- */
-#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13)
-
-/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value)
- * enable/disable the firewire cable power supply of the uninorth
- * firewire cell
- */
-#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14)
-
-/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value)
- * set the sleep state of the motherboard.
- *
- * Pass -1 as value to query for sleep capability
- * Pass 1 to set IOs to sleep
- * Pass 0 to set IOs to wake
- */
-#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15)
-
-/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0)
- *
- * returns some motherboard infos.
- * selector: 0 - model id
- * 1 - model flags (capabilities)
- * 2 - model name (cast to const char *)
- */
-#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16)
-#define PMAC_MB_INFO_MODEL 0
-#define PMAC_MB_INFO_FLAGS 1
-#define PMAC_MB_INFO_NAME 2
-
-/* PMAC_FTR_READ_GPIO (NULL, int index, 0)
- *
- * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
- * the value returned is a byte (positive), or a negative error code
- */
-#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17)
-
-/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value)
- *
- * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
- */
-#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18)
-
-/* PMAC_FTR_ENABLE_MPIC
- *
- * Enable the MPIC cell
- */
-#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19)
-
-/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0)
- *
- * Enable/disable the AACK delay on the northbridge for systems using DFS
- */
-#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20)
-
-/* PMAC_FTR_DEVICE_CAN_WAKE
- *
- * Used by video drivers to inform system that they can actually perform
- * wakeup from sleep
- */
-#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22)
-
-
-/* Don't use those directly, they are for the sake of pmac_setup.c */
-extern long pmac_do_feature_call(unsigned int selector, ...);
-extern void pmac_feature_init(void);
-
-/* Video suspend tweak */
-extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
-extern void pmac_call_early_video_resume(void);
-
-#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x))
-
-/* The AGP driver registers itself here */
-extern void pmac_register_agp_pm(struct pci_dev *bridge,
- int (*suspend)(struct pci_dev *bridge),
- int (*resume)(struct pci_dev *bridge));
-
-/* Those are meant to be used by video drivers to deal with AGP
- * suspend resume properly
- */
-extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
-extern void pmac_resume_agp_for_card(struct pci_dev *dev);
-
-/* Used by the via-pmu driver for suspend/resume
- */
-extern void pmac_tweak_clock_spreading(int enable);
-
-/*
- * The part below is for use by macio_asic.c only, do not rely
- * on the data structures or constants below in a normal driver
- *
- */
-
-#define MAX_MACIO_CHIPS 2
-
-enum {
- macio_unknown = 0,
- macio_grand_central,
- macio_ohare,
- macio_ohareII,
- macio_heathrow,
- macio_gatwick,
- macio_paddington,
- macio_keylargo,
- macio_pangea,
- macio_intrepid,
- macio_keylargo2,
-};
-
-struct macio_chip
-{
- struct device_node *of_node;
- int type;
- const char *name;
- int rev;
- volatile u32 __iomem *base;
- unsigned long flags;
-
- /* For use by macio_asic PCI driver */
- struct macio_bus lbus;
-};
-
-extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
-
-#define MACIO_FLAG_SCCA_ON 0x00000001
-#define MACIO_FLAG_SCCB_ON 0x00000002
-#define MACIO_FLAG_SCC_LOCKED 0x00000004
-#define MACIO_FLAG_AIRPORT_ON 0x00000010
-#define MACIO_FLAG_FW_SUPPORTED 0x00000020
-
-extern struct macio_chip* macio_find(struct device_node* child, int type);
-
-#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2))
-#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r))
-
-#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r)))
-#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v)))
-#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v)))
-#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
-#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r)))
-#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v)))
-
-#endif /* __PPC_ASM_PMAC_FEATURE_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pmac_low_i2c.h b/include/asm-ppc/pmac_low_i2c.h
deleted file mode 100644
index 809a5963d5e..00000000000
--- a/include/asm-ppc/pmac_low_i2c.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-ppc/pmac_low_i2c.h
- *
- * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-#ifndef __PMAC_LOW_I2C_H__
-#define __PMAC_LOW_I2C_H__
-
-/* i2c mode (based on the platform functions format) */
-enum {
- pmac_low_i2c_mode_dumb = 1,
- pmac_low_i2c_mode_std = 2,
- pmac_low_i2c_mode_stdsub = 3,
- pmac_low_i2c_mode_combined = 4,
-};
-
-/* RW bit in address */
-enum {
- pmac_low_i2c_read = 0x01,
- pmac_low_i2c_write = 0x00
-};
-
-/* Init, called early during boot */
-extern void pmac_init_low_i2c(void);
-
-/* Locking functions exposed to i2c-keywest */
-int pmac_low_i2c_lock(struct device_node *np);
-int pmac_low_i2c_unlock(struct device_node *np);
-
-/* Access functions for platform code */
-int pmac_low_i2c_open(struct device_node *np, int channel);
-int pmac_low_i2c_close(struct device_node *np);
-int pmac_low_i2c_setmode(struct device_node *np, int mode);
-int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len);
-
-
-#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/include/asm-ppc/uninorth.h b/include/asm-ppc/uninorth.h
deleted file mode 100644
index f737732c386..00000000000
--- a/include/asm-ppc/uninorth.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * uninorth.h: definitions for using the "UniNorth" host bridge chip
- * from Apple. This chip is used on "Core99" machines
- * This also includes U2 used on more recent MacRISC2/3
- * machines and U3 (G5)
- *
- */
-#ifdef __KERNEL__
-#ifndef __ASM_UNINORTH_H__
-#define __ASM_UNINORTH_H__
-
-/*
- * Uni-N and U3 config space reg. definitions
- *
- * (Little endian)
- */
-
-/* Address ranges selection. This one should work with Bandit too */
-/* Not U3 */
-#define UNI_N_ADDR_SELECT 0x48
-#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */
-#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */
-
-/* AGP registers */
-/* Not U3 */
-#define UNI_N_CFG_GART_BASE 0x8c
-#define UNI_N_CFG_AGP_BASE 0x90
-#define UNI_N_CFG_GART_CTRL 0x94
-#define UNI_N_CFG_INTERNAL_STATUS 0x98
-#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4
-
-/* UNI_N_CFG_GART_CTRL bits definitions */
-#define UNI_N_CFG_GART_INVAL 0x00000001
-#define UNI_N_CFG_GART_ENABLE 0x00000100
-#define UNI_N_CFG_GART_2xRESET 0x00010000
-#define UNI_N_CFG_GART_DISSBADET 0x00020000
-/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
-#define U3_N_CFG_GART_SYNCMODE 0x00040000
-#define U3_N_CFG_GART_PERFRD 0x00080000
-#define U3_N_CFG_GART_B2BGNT 0x00200000
-#define U3_N_CFG_GART_FASTDDR 0x00400000
-
-/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
- * revision 1.5 (x4 AGP) may need further changes.
- *
- * AGP_BASE register contains the base address of the AGP aperture on
- * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
- * even if decoding of this address range is enabled in the address select
- * register. Apparently, the only supported bases are 256Mb multiples
- * (high 4 bits of that register).
- *
- * GART_BASE register appear to contain the physical address of the GART
- * in system memory in the high address bits (page aligned), and the
- * GART size in the low order bits (number of GART pages)
- *
- * The GART format itself is one 32bits word per physical memory page.
- * This word contains, in little-endian format (!!!), the physical address
- * of the page in the high bits, and what appears to be an "enable" bit
- * in the LSB bit (0) that must be set to 1 when the entry is valid.
- *
- * Obviously, the GART is not cache coherent and so any change to it
- * must be flushed to memory (or maybe just make the GART space non
- * cachable). AGP memory itself doens't seem to be cache coherent neither.
- *
- * In order to invalidate the GART (which is probably necessary to inval
- * the bridge internal TLBs), the following sequence has to be written,
- * in order, to the GART_CTRL register:
- *
- * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
- * UNI_N_CFG_GART_ENABLE
- * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
- * UNI_N_CFG_GART_ENABLE
- *
- * As far as AGP "features" are concerned, it looks like fast write may
- * not be supported but this has to be confirmed.
- *
- * Turning on AGP seem to require a double invalidate operation, one before
- * setting the AGP command register, on after.
- *
- * Turning off AGP seems to require the following sequence: first wait
- * for the AGP to be idle by reading the internal status register, then
- * write in that order to the GART_CTRL register:
- *
- * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
- * 0
- * UNI_N_CFG_GART_2xRESET
- * 0
- */
-
-/*
- * Uni-N memory mapped reg. definitions
- *
- * Those registers are Big-Endian !!
- *
- * Their meaning come from either Darwin and/or from experiments I made with
- * the bootrom, I'm not sure about their exact meaning yet
- *
- */
-
-/* Version of the UniNorth chip */
-#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */
-
-#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */
-#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */
-#define UNI_N_VERSION_150 0x0011 /* 1.5 */
-#define UNI_N_VERSION_200 0x0024 /* 2.0 */
-#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */
-#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */
-#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */
-
-/* This register is used to enable/disable various clocks */
-#define UNI_N_CLOCK_CNTL 0x0020
-#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */
-#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */
-#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */
-#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */
-
-/* Power Management control */
-#define UNI_N_POWER_MGT 0x0030
-#define UNI_N_POWER_MGT_NORMAL 0x00
-#define UNI_N_POWER_MGT_IDLE2 0x01
-#define UNI_N_POWER_MGT_SLEEP 0x02
-
-/* This register is configured by Darwin depending on the UniN
- * revision
- */
-#define UNI_N_ARB_CTRL 0x0040
-#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15
-#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000
-#define UNI_N_ARB_CTRL_QACK_DELAY 0x30
-#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00
-
-/* This one _might_ return the CPU number of the CPU reading it;
- * the bootROM decides whether to boot or to sleep/spinloop depending
- * on this register beeing 0 or not
- */
-#define UNI_N_CPU_NUMBER 0x0050
-
-/* This register appear to be read by the bootROM to decide what
- * to do on a non-recoverable reset (powerup or wakeup)
- */
-#define UNI_N_HWINIT_STATE 0x0070
-#define UNI_N_HWINIT_STATE_SLEEPING 0x01
-#define UNI_N_HWINIT_STATE_RUNNING 0x02
-/* This last bit appear to be used by the bootROM to know the second
- * CPU has started and will enter it's sleep loop with IP=0
- */
-#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000
-
-/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
- * is in low speed mode.
- */
-#define UNI_N_AACK_DELAY 0x0100
-#define UNI_N_AACK_DELAY_ENABLE 0x00000001
-
-/* Clock status for Intrepid */
-#define UNI_N_CLOCK_STOP_STATUS0 0x0150
-#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000
-#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000
-#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000
-#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000
-#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000
-#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000
-#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000
-#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000
-#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000
-#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200
-#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100
-#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080
-#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040
-#define UNI_N_CLOCK_STOPPED_USB0 0x00000020
-#define UNI_N_CLOCK_STOPPED_USB1 0x00000010
-#define UNI_N_CLOCK_STOPPED_USB2 0x00000008
-#define UNI_N_CLOCK_STOPPED_32 0x00000004
-#define UNI_N_CLOCK_STOPPED_45 0x00000002
-#define UNI_N_CLOCK_STOPPED_49 0x00000001
-
-#define UNI_N_CLOCK_STOP_STATUS1 0x0160
-#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000
-#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000
-#define UNI_N_CLOCK_STOPPED_CPU 0x00020000
-#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000
-#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000
-#define UNI_N_CLOCK_STOPPED_FW 0x00004000
-#define UNI_N_CLOCK_STOPPED_GB 0x00002000
-#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000
-#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800
-#define UNI_N_CLOCK_STOPPED_MAX 0x00000400
-#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200
-#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100
-#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080
-#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040
-#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020
-#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008
-#define UNI_N_CLOCK_STOPPED_AGP 0x00000004
-#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002
-#define UNI_N_CLOCK_STOPPED_18 0x00000001
-
-/* Intrepid registe to OF do-platform-clockspreading */
-#define UNI_N_CLOCK_SPREADING 0x190
-
-/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
-
-
-/*
- * U3 specific registers
- */
-
-
-/* U3 Toggle */
-#define U3_TOGGLE_REG 0x00e0
-#define U3_PMC_START_STOP 0x0001
-#define U3_MPIC_RESET 0x0002
-#define U3_MPIC_OUTPUT_ENABLE 0x0004
-
-/* U3 API PHY Config 1 */
-#define U3_API_PHY_CONFIG_1 0x23030
-
-/* U3 HyperTransport registers */
-#define U3_HT_CONFIG_BASE 0x70000
-#define U3_HT_LINK_COMMAND 0x100
-#define U3_HT_LINK_CONFIG 0x110
-#define U3_HT_LINK_FREQ 0x120
-
-#endif /* __ASM_UNINORTH_H__ */
-#endif /* __KERNEL__ */