Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

106 files changed, 4581 insertions, 973 deletions

diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h
index 2f85049cfb3..fde675872c5 100644
--- a/include/linux/arcdevice.h
+++ b/include/linux/arcdevice.h
@@ -214,7 +214,7 @@ extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
  */
 struct Incoming {
 	struct sk_buff *skb;	/* packet data buffer             */
-	uint16_t sequence;	/* sequence number of assembly    */
+	__be16 sequence;	/* sequence number of assembly    */
 	uint8_t lastpacket,	/* number of last packet (from 1) */
 		numpackets;	/* number of packets in split     */
 };
@@ -292,7 +292,7 @@ struct arcnet_local {
 
 	struct {
 		uint16_t sequence;	/* sequence number (incs with each packet) */
-		uint16_t aborted_seq;
+		__be16 aborted_seq;
 
 		struct Incoming incoming[256];	/* one from each address */
 	} rfc1201;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index c043c1ccf1c..a4f373f8b79 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -230,6 +230,12 @@ enum {
 
 	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
 
+	SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
+	SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
+
+	/* SETFEATURE Sector counts for SATA features */
+	SATA_AN			= 0x05,  /* Asynchronous Notification */
+
 	/* ATAPI stuff */
 	ATAPI_PKT_DMA		= (1 << 0),
 	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
@@ -281,6 +287,15 @@ enum {
 	SERR_PROTOCOL		= (1 << 10), /* protocol violation */
 	SERR_INTERNAL		= (1 << 11), /* host internal error */
 	SERR_PHYRDY_CHG		= (1 << 16), /* PHY RDY changed */
+	SERR_PHY_INT_ERR	= (1 << 17), /* PHY internal error */
+	SERR_COMM_WAKE		= (1 << 18), /* Comm wake */
+	SERR_10B_8B_ERR		= (1 << 19), /* 10b to 8b decode error */
+	SERR_DISPARITY		= (1 << 20), /* Disparity */
+	SERR_CRC		= (1 << 21), /* CRC error */
+	SERR_HANDSHAKE		= (1 << 22), /* Handshake error */
+	SERR_LINK_SEQ_ERR	= (1 << 23), /* Link sequence error */
+	SERR_TRANS_ST_ERROR	= (1 << 24), /* Transport state trans. error */
+	SERR_UNRECOG_FIS	= (1 << 25), /* Unrecognized FIS */
 	SERR_DEV_XCHG		= (1 << 26), /* device exchanged */
 
 	/* struct ata_taskfile flags */
@@ -341,24 +356,17 @@ struct ata_taskfile {
 };
 
 #define ata_id_is_ata(id)	(((id)[0] & (1 << 15)) == 0)
-#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
-#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
-#define ata_id_hpa_enabled(id)	((id)[85] & (1 << 10))
-#define ata_id_has_fua(id)	((id)[84] & (1 << 6))
-#define ata_id_has_flush(id)	((id)[83] & (1 << 12))
-#define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13))
-#define ata_id_has_lba48(id)	((id)[83] & (1 << 10))
-#define ata_id_has_hpa(id)	((id)[82] & (1 << 10))
-#define ata_id_has_wcache(id)	((id)[82] & (1 << 5))
-#define ata_id_has_pm(id)	((id)[82] & (1 << 3))
 #define ata_id_has_lba(id)	((id)[49] & (1 << 9))
 #define ata_id_has_dma(id)	((id)[49] & (1 << 8))
 #define ata_id_has_ncq(id)	((id)[76] & (1 << 8))
 #define ata_id_queue_depth(id)	(((id)[75] & 0x1f) + 1)
 #define ata_id_removeable(id)	((id)[0] & (1 << 7))
-#define ata_id_has_dword_io(id)	((id)[50] & (1 << 0))
+#define ata_id_has_dword_io(id)	((id)[48] & (1 << 0))
+#define ata_id_has_atapi_AN(id)	\
+	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
+	  ((id)[78] & (1 << 5)) )
 #define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[49] & (1 << 9))
+#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
 #define ata_id_u32(id,n)	\
 	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
 #define ata_id_u64(id,n)	\
@@ -369,6 +377,90 @@ struct ata_taskfile {
 
 #define ata_id_cdb_intr(id)	(((id)[0] & 0x60) == 0x20)
 
+static inline int ata_id_has_fua(const u16 *id)
+{
+	if ((id[84] & 0xC000) != 0x4000)
+		return 0;
+	return id[84] & (1 << 6);
+}
+
+static inline int ata_id_has_flush(const u16 *id)
+{
+	if ((id[83] & 0xC000) != 0x4000)
+		return 0;
+	return id[83] & (1 << 12);
+}
+
+static inline int ata_id_has_flush_ext(const u16 *id)
+{
+	if ((id[83] & 0xC000) != 0x4000)
+		return 0;
+	return id[83] & (1 << 13);
+}
+
+static inline int ata_id_has_lba48(const u16 *id)
+{
+	if ((id[83] & 0xC000) != 0x4000)
+		return 0;
+	return id[83] & (1 << 10);
+}
+
+static inline int ata_id_hpa_enabled(const u16 *id)
+{
+	/* Yes children, word 83 valid bits cover word 82 data */
+	if ((id[83] & 0xC000) != 0x4000)
+		return 0;
+	/* And 87 covers 85-87 */
+	if ((id[87] & 0xC000) != 0x4000)
+		return 0;
+	/* Check command sets enabled as well as supported */
+	if ((id[85] & ( 1 << 10)) == 0)
+		return 0;
+	return id[82] & (1 << 10);
+}
+
+static inline int ata_id_has_wcache(const u16 *id)
+{
+	/* Yes children, word 83 valid bits cover word 82 data */
+	if ((id[83] & 0xC000) != 0x4000)
+		return 0;
+	return id[82] & (1 << 5);
+}
+
+static inline int ata_id_has_pm(const u16 *id)
+{
+	if ((id[83] & 0xC000) != 0x4000)
+		return 0;
+	return id[82] & (1 << 3);
+}
+
+static inline int ata_id_rahead_enabled(const u16 *id)
+{
+	if ((id[87] & 0xC000) != 0x4000)
+		return 0;
+	return id[85] & (1 << 6);
+}
+
+static inline int ata_id_wcache_enabled(const u16 *id)
+{
+	if ((id[87] & 0xC000) != 0x4000)
+		return 0;
+	return id[85] & (1 << 5);
+}
+
+/**
+ *	ata_id_major_version	-	get ATA level of drive
+ *	@id: Identify data
+ *
+ *	Caveats:
+ *		ATA-1 considers identify optional
+ *		ATA-2 introduces mandatory identify
+ *		ATA-3 introduces word 80 and accurate reporting
+ *
+ *	The practical impact of this is that ata_id_major_version cannot
+ *	reliably report on drives below ATA3. 
+ */
+
 static inline unsigned int ata_id_major_version(const u16 *id)
 {
 	unsigned int mver;
diff --git a/include/linux/audit.h b/include/linux/audit.h
index d6579df8dad..9ae740936a6 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -108,10 +108,11 @@
 #define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
 #define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
 #define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
-#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Add a XFRM state */
-#define AUDIT_MAC_IPSEC_DELSA	1412	/* Delete a XFRM state */
-#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Add a XFRM policy */
-#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Delete a XFRM policy */
+#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
+#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
+#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
 
 #define AUDIT_FIRST_KERN_ANOM_MSG   1700
 #define AUDIT_LAST_KERN_ANOM_MSG    1799
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
index c897c7b0385..1ee9488ca2e 100644
--- a/include/linux/backlight.h
+++ b/include/linux/backlight.h
@@ -92,4 +92,13 @@ static inline void * bl_get_data(struct backlight_device *bl_dev)
 	return dev_get_drvdata(&bl_dev->dev);
 }
 
+struct generic_bl_info {
+	const char *name;
+	int max_intensity;
+	int default_intensity;
+	int limit_mask;
+	void (*set_bl_intensity)(int intensity);
+	void (*kick_battery)(void);
+};
+
 #endif
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 1ddef34f43c..089a8bc55dd 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -64,7 +64,7 @@ struct bio_vec {
 
 struct bio_set;
 struct bio;
-typedef int (bio_end_io_t) (struct bio *, unsigned int, int);
+typedef void (bio_end_io_t) (struct bio *, int);
 typedef void (bio_destructor_t) (struct bio *);
 
 /*
@@ -226,7 +226,7 @@ struct bio {
 #define BIO_SEG_BOUNDARY(q, b1, b2) \
 	BIOVEC_SEG_BOUNDARY((q), __BVEC_END((b1)), __BVEC_START((b2)))
 
-#define bio_io_error(bio, bytes) bio_endio((bio), (bytes), -EIO)
+#define bio_io_error(bio) bio_endio((bio), -EIO)
 
 /*
  * drivers should not use the __ version unless they _really_ want to
@@ -286,7 +286,7 @@ extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
 extern void bio_put(struct bio *);
 extern void bio_free(struct bio *, struct bio_set *);
 
-extern void bio_endio(struct bio *, unsigned int, int);
+extern void bio_endio(struct bio *, int);
 struct request_queue;
 extern int bio_phys_segments(struct request_queue *, struct bio *);
 extern int bio_hw_segments(struct request_queue *, struct bio *);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index b126c6f68e2..5ed888b04b2 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_BLKDEV_H
 #define _LINUX_BLKDEV_H
 
+#ifdef CONFIG_BLOCK
+
 #include <linux/sched.h>
 #include <linux/major.h>
 #include <linux/genhd.h>
@@ -18,22 +20,6 @@
 
 #include <asm/scatterlist.h>
 
-#ifdef CONFIG_LBD
-# include <asm/div64.h>
-# define sector_div(a, b) do_div(a, b)
-#else
-# define sector_div(n, b)( \
-{ \
-	int _res; \
-	_res = (n) % (b); \
-	(n) /= (b); \
-	_res; \
-} \
-)
-#endif
-
-#ifdef CONFIG_BLOCK
-
 struct scsi_ioctl_command;
 
 struct request_queue;
@@ -471,7 +457,6 @@ struct request_queue
 	int			orderr, ordcolor;
 	struct request		pre_flush_rq, bar_rq, post_flush_rq;
 	struct request		*orig_bar_rq;
-	unsigned int		bi_size;
 
 	struct mutex		sysfs_lock;
 
@@ -637,10 +622,23 @@ static inline void blk_queue_bounce(struct request_queue *q, struct bio **bio)
 }
 #endif /* CONFIG_MMU */
 
-#define rq_for_each_bio(_bio, rq)	\
+struct req_iterator {
+	int i;
+	struct bio *bio;
+};
+
+/* This should not be used directly - use rq_for_each_segment */
+#define __rq_for_each_bio(_bio, rq)	\
 	if ((rq->bio))			\
 		for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
 
+#define rq_for_each_segment(bvl, _rq, _iter)			\
+	__rq_for_each_bio(_iter.bio, _rq)			\
+		bio_for_each_segment(bvl, _iter.bio, _iter.i)
+
+#define rq_iter_last(rq, _iter)					\
+		(_iter.bio->bi_next == NULL && _iter.i == _iter.bio->bi_vcnt-1)
+
 extern int blk_register_queue(struct gendisk *disk);
 extern void blk_unregister_queue(struct gendisk *disk);
 extern void register_disk(struct gendisk *dev);
@@ -662,8 +660,8 @@ extern int sg_scsi_ioctl(struct file *, struct request_queue *,
 /*
  * Temporary export, until SCSI gets fixed up.
  */
-extern int ll_back_merge_fn(struct request_queue *, struct request *,
-		struct bio *);
+extern int blk_rq_append_bio(struct request_queue *q, struct request *rq,
+			     struct bio *bio);
 
 /*
  * A queue has just exitted congestion.  Note this in the global counter of
@@ -810,7 +808,6 @@ static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt,
 	return bqt->tag_index[tag];
 }
 
-extern void blk_rq_bio_prep(struct request_queue *, struct request *, struct bio *);
 extern int blkdev_issue_flush(struct block_device *, sector_t *);
 
 #define MAX_PHYS_SEGMENTS 128
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 7b5d56b82b5..7e11d23ac36 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -142,10 +142,14 @@ struct blk_user_trace_setup {
 	u32 pid;
 };
 
+#ifdef __KERNEL__
 #if defined(CONFIG_BLK_DEV_IO_TRACE)
 extern int blk_trace_ioctl(struct block_device *, unsigned, char __user *);
 extern void blk_trace_shutdown(struct request_queue *);
 extern void __blk_add_trace(struct blk_trace *, sector_t, int, int, u32, int, int, void *);
+extern int do_blk_trace_setup(struct request_queue *q,
+	struct block_device *bdev, struct blk_user_trace_setup *buts);
+
 
 /**
  * blk_add_trace_rq - Add a trace for a request oriented action
@@ -286,6 +290,7 @@ static inline void blk_add_trace_remap(struct request_queue *q, struct bio *bio,
 #define blk_add_trace_generic(q, rq, rw, what)	do { } while (0)
 #define blk_add_trace_pdu_int(q, what, bio, pdu)	do { } while (0)
 #define blk_add_trace_remap(q, bio, dev, f, t)	do {} while (0)
+#define do_blk_trace_setup(q, bdev, buts)	(-ENOTTY)
 #endif /* CONFIG_BLK_DEV_IO_TRACE */
-
+#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index def5a659b8a..d2ddea92689 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -8,7 +8,7 @@
 #ifndef _LINUX_CLOCKCHIPS_H
 #define _LINUX_CLOCKCHIPS_H
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BUILD
 
 #include <linux/clocksource.h>
 #include <linux/cpumask.h>
@@ -126,11 +126,14 @@ extern int clockevents_register_notifier(struct notifier_block *nb);
 extern int clockevents_program_event(struct clock_event_device *dev,
 				     ktime_t expires, ktime_t now);
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
 extern void clockevents_notify(unsigned long reason, void *arg);
-
 #else
+# define clockevents_notify(reason, arg) do { } while (0)
+#endif
+
+#else /* CONFIG_GENERIC_CLOCKEVENTS_BUILD */
 
-static inline void clockevents_resume_events(void) { }
 #define clockevents_notify(reason, arg) do { } while (0)
 
 #endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 10eb56b2940..b62f823e90c 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -153,7 +153,7 @@ struct cn_dev {
 
 	u32 seq, groups;
 	struct sock *nls;
-	void (*input) (struct sock * sk, int len);
+	void (*input) (struct sk_buff *skb);
 
 	struct cn_queue_dev *cbdev;
 };
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 3ec6e7ff5fb..23932d7741a 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -32,12 +32,24 @@
  *                     CPUFREQ NOTIFIER INTERFACE                    *
  *********************************************************************/
 
-int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);
-int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
-
 #define CPUFREQ_TRANSITION_NOTIFIER	(0)
 #define CPUFREQ_POLICY_NOTIFIER		(1)
 
+#ifdef CONFIG_CPU_FREQ
+int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);
+int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
+#else		/* CONFIG_CPU_FREQ */
+static inline int cpufreq_register_notifier(struct notifier_block *nb,
+						unsigned int list)
+{
+	return 0;
+}
+static inline int cpufreq_unregister_notifier(struct notifier_block *nb,
+						unsigned int list)
+{
+	return 0;
+}
+#endif		/* CONFIG_CPU_FREQ */
 
 /* if (cpufreq_driver->target) exists, the ->governor decides what frequency
  * within the limits is used. If (cpufreq_driver->setpolicy> exists, these
@@ -155,6 +167,9 @@ struct cpufreq_governor {
 	char	name[CPUFREQ_NAME_LEN];
 	int 	(*governor)	(struct cpufreq_policy *policy,
 				 unsigned int event);
+	unsigned int max_transition_latency; /* HW must be able to switch to
+			next freq faster than this value in nano secs or we
+			will fallback to performance governor */
 	struct list_head	governor_list;
 	struct module		*owner;
 };
@@ -279,12 +294,24 @@ static inline unsigned int cpufreq_quick_get(unsigned int cpu)
  *********************************************************************/
 
 
-#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+/*
+  Performance governor is fallback governor if any other gov failed to
+  auto load due latency restrictions
+*/
+#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE
 extern struct cpufreq_governor cpufreq_gov_performance;
-#define CPUFREQ_DEFAULT_GOVERNOR	&cpufreq_gov_performance
+#endif
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_performance)
 #elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE)
 extern struct cpufreq_governor cpufreq_gov_userspace;
-#define CPUFREQ_DEFAULT_GOVERNOR	&cpufreq_gov_userspace
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_userspace)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND)
+extern struct cpufreq_governor cpufreq_gov_ondemand;
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_ondemand)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE)
+extern struct cpufreq_governor cpufreq_gov_conservative;
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_conservative)
 #endif
 
 
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index 357e8cfedc3..fc32694287e 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -34,6 +34,7 @@
 #define CRYPTO_ALG_TYPE_HASH		0x00000003
 #define CRYPTO_ALG_TYPE_BLKCIPHER	0x00000004
 #define CRYPTO_ALG_TYPE_COMPRESS	0x00000005
+#define CRYPTO_ALG_TYPE_AEAD		0x00000006
 
 #define CRYPTO_ALG_TYPE_HASH_MASK	0x0000000e
 
@@ -91,9 +92,9 @@
 struct scatterlist;
 struct crypto_ablkcipher;
 struct crypto_async_request;
+struct crypto_aead;
 struct crypto_blkcipher;
 struct crypto_hash;
-struct crypto_queue;
 struct crypto_tfm;
 struct crypto_type;
 
@@ -121,6 +122,32 @@ struct ablkcipher_request {
 	void *__ctx[] CRYPTO_MINALIGN_ATTR;
 };
 
+/**
+ *	struct aead_request - AEAD request
+ *	@base: Common attributes for async crypto requests
+ *	@assoclen: Length in bytes of associated data for authentication
+ *	@cryptlen: Length of data to be encrypted or decrypted
+ *	@iv: Initialisation vector
+ *	@assoc: Associated data
+ *	@src: Source data
+ *	@dst: Destination data
+ *	@__ctx: Start of private context data
+ */
+struct aead_request {
+	struct crypto_async_request base;
+
+	unsigned int assoclen;
+	unsigned int cryptlen;
+
+	u8 *iv;
+
+	struct scatterlist *assoc;
+	struct scatterlist *src;
+	struct scatterlist *dst;
+
+	void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
 struct blkcipher_desc {
 	struct crypto_blkcipher *tfm;
 	void *info;
@@ -150,13 +177,21 @@ struct ablkcipher_alg {
 	int (*encrypt)(struct ablkcipher_request *req);
 	int (*decrypt)(struct ablkcipher_request *req);
 
-	struct crypto_queue *queue;
-
 	unsigned int min_keysize;
 	unsigned int max_keysize;
 	unsigned int ivsize;
 };
 
+struct aead_alg {
+	int (*setkey)(struct crypto_aead *tfm, const u8 *key,
+	              unsigned int keylen);
+	int (*encrypt)(struct aead_request *req);
+	int (*decrypt)(struct aead_request *req);
+
+	unsigned int ivsize;
+	unsigned int authsize;
+};
+
 struct blkcipher_alg {
 	int (*setkey)(struct crypto_tfm *tfm, const u8 *key,
 	              unsigned int keylen);
@@ -212,6 +247,7 @@ struct compress_alg {
 };
 
 #define cra_ablkcipher	cra_u.ablkcipher
+#define cra_aead	cra_u.aead
 #define cra_blkcipher	cra_u.blkcipher
 #define cra_cipher	cra_u.cipher
 #define cra_digest	cra_u.digest
@@ -237,6 +273,7 @@ struct crypto_alg {
 
 	union {
 		struct ablkcipher_alg ablkcipher;
+		struct aead_alg aead;
 		struct blkcipher_alg blkcipher;
 		struct cipher_alg cipher;
 		struct digest_alg digest;
@@ -284,6 +321,16 @@ struct ablkcipher_tfm {
 	unsigned int reqsize;
 };
 
+struct aead_tfm {
+	int (*setkey)(struct crypto_aead *tfm, const u8 *key,
+	              unsigned int keylen);
+	int (*encrypt)(struct aead_request *req);
+	int (*decrypt)(struct aead_request *req);
+	unsigned int ivsize;
+	unsigned int authsize;
+	unsigned int reqsize;
+};
+
 struct blkcipher_tfm {
 	void *iv;
 	int (*setkey)(struct crypto_tfm *tfm, const u8 *key,
@@ -323,6 +370,7 @@ struct compress_tfm {
 };
 
 #define crt_ablkcipher	crt_u.ablkcipher
+#define crt_aead	crt_u.aead
 #define crt_blkcipher	crt_u.blkcipher
 #define crt_cipher	crt_u.cipher
 #define crt_hash	crt_u.hash
@@ -334,6 +382,7 @@ struct crypto_tfm {
 	
 	union {
 		struct ablkcipher_tfm ablkcipher;
+		struct aead_tfm aead;
 		struct blkcipher_tfm blkcipher;
 		struct cipher_tfm cipher;
 		struct hash_tfm hash;
@@ -349,6 +398,10 @@ struct crypto_ablkcipher {
 	struct crypto_tfm base;
 };
 
+struct crypto_aead {
+	struct crypto_tfm base;
+};
+
 struct crypto_blkcipher {
 	struct crypto_tfm base;
 };
@@ -369,11 +422,15 @@ enum {
 	CRYPTOA_UNSPEC,
 	CRYPTOA_ALG,
 	CRYPTOA_TYPE,
+	CRYPTOA_U32,
 	__CRYPTOA_MAX,
 };
 
 #define CRYPTOA_MAX (__CRYPTOA_MAX - 1)
 
+/* Maximum number of (rtattr) parameters for each template. */
+#define CRYPTO_MAX_ATTRS 32
+
 struct crypto_attr_alg {
 	char name[CRYPTO_MAX_ALG_NAME];
 };
@@ -383,6 +440,10 @@ struct crypto_attr_type {
 	u32 mask;
 };
 
+struct crypto_attr_u32 {
+	u32 num;
+};
+
 /* 
  * Transform user interface.
  */
@@ -563,7 +624,8 @@ static inline int crypto_ablkcipher_decrypt(struct ablkcipher_request *req)
 	return crt->decrypt(req);
 }
 
-static inline int crypto_ablkcipher_reqsize(struct crypto_ablkcipher *tfm)
+static inline unsigned int crypto_ablkcipher_reqsize(
+	struct crypto_ablkcipher *tfm)
 {
 	return crypto_ablkcipher_crt(tfm)->reqsize;
 }
@@ -619,6 +681,150 @@ static inline void ablkcipher_request_set_crypt(
 	req->info = iv;
 }
 
+static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm)
+{
+	return (struct crypto_aead *)tfm;
+}
+
+static inline struct crypto_aead *crypto_alloc_aead(const char *alg_name,
+						    u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_AEAD;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return __crypto_aead_cast(crypto_alloc_base(alg_name, type, mask));
+}
+
+static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_aead(struct crypto_aead *tfm)
+{
+	crypto_free_tfm(crypto_aead_tfm(tfm));
+}
+
+static inline struct aead_tfm *crypto_aead_crt(struct crypto_aead *tfm)
+{
+	return &crypto_aead_tfm(tfm)->crt_aead;
+}
+
+static inline unsigned int crypto_aead_ivsize(struct crypto_aead *tfm)
+{
+	return crypto_aead_crt(tfm)->ivsize;
+}
+
+static inline unsigned int crypto_aead_authsize(struct crypto_aead *tfm)
+{
+	return crypto_aead_crt(tfm)->authsize;
+}
+
+static inline unsigned int crypto_aead_blocksize(struct crypto_aead *tfm)
+{
+	return crypto_tfm_alg_blocksize(crypto_aead_tfm(tfm));
+}
+
+static inline unsigned int crypto_aead_alignmask(struct crypto_aead *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_aead_tfm(tfm));
+}
+
+static inline u32 crypto_aead_get_flags(struct crypto_aead *tfm)
+{
+	return crypto_tfm_get_flags(crypto_aead_tfm(tfm));
+}
+
+static inline void crypto_aead_set_flags(struct crypto_aead *tfm, u32 flags)
+{
+	crypto_tfm_set_flags(crypto_aead_tfm(tfm), flags);
+}
+
+static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_aead_tfm(tfm), flags);
+}
+
+static inline int crypto_aead_setkey(struct crypto_aead *tfm, const u8 *key,
+				     unsigned int keylen)
+{
+	return crypto_aead_crt(tfm)->setkey(tfm, key, keylen);
+}
+
+static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req)
+{
+	return __crypto_aead_cast(req->base.tfm);
+}
+
+static inline int crypto_aead_encrypt(struct aead_request *req)
+{
+	return crypto_aead_crt(crypto_aead_reqtfm(req))->encrypt(req);
+}
+
+static inline int crypto_aead_decrypt(struct aead_request *req)
+{
+	return crypto_aead_crt(crypto_aead_reqtfm(req))->decrypt(req);
+}
+
+static inline unsigned int crypto_aead_reqsize(struct crypto_aead *tfm)
+{
+	return crypto_aead_crt(tfm)->reqsize;
+}
+
+static inline void aead_request_set_tfm(struct aead_request *req,
+					struct crypto_aead *tfm)
+{
+	req->base.tfm = crypto_aead_tfm(tfm);
+}
+
+static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm,
+						      gfp_t gfp)
+{
+	struct aead_request *req;
+
+	req = kmalloc(sizeof(*req) + crypto_aead_reqsize(tfm), gfp);
+
+	if (likely(req))
+		aead_request_set_tfm(req, tfm);
+
+	return req;
+}
+
+static inline void aead_request_free(struct aead_request *req)
+{
+	kfree(req);
+}
+
+static inline void aead_request_set_callback(struct aead_request *req,
+					     u32 flags,
+					     crypto_completion_t complete,
+					     void *data)
+{
+	req->base.complete = complete;
+	req->base.data = data;
+	req->base.flags = flags;
+}
+
+static inline void aead_request_set_crypt(struct aead_request *req,
+					  struct scatterlist *src,
+					  struct scatterlist *dst,
+					  unsigned int cryptlen, u8 *iv)
+{
+	req->src = src;
+	req->dst = dst;
+	req->cryptlen = cryptlen;
+	req->iv = iv;
+}
+
+static inline void aead_request_set_assoc(struct aead_request *req,
+					  struct scatterlist *assoc,
+					  unsigned int assoclen)
+{
+	req->assoc = assoc;
+	req->assoclen = assoclen;
+}
+
 static inline struct crypto_blkcipher *__crypto_blkcipher_cast(
 	struct crypto_tfm *tfm)
 {
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index fda2148d8c8..f3fc4392e93 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -56,10 +56,9 @@ struct dccp_hdr_ext {
 };
 
 /**
- * struct dccp_hdr_request - Conection initiation request header
+ * struct dccp_hdr_request - Connection initiation request header
  *
  * @dccph_req_service - Service to which the client app wants to connect
- * @dccph_req_options - list of options (must be a multiple of 32 bits
  */
 struct dccp_hdr_request {
 	__be32	dccph_req_service;
@@ -76,12 +75,10 @@ struct dccp_hdr_ack_bits {
 	__be32	dccph_ack_nr_low;
 };
 /**
- * struct dccp_hdr_response - Conection initiation response header
+ * struct dccp_hdr_response - Connection initiation response header
  *
- * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
- * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
+ * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
  * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
- * @dccph_resp_options - list of options (must be a multiple of 32 bits
  */
 struct dccp_hdr_response {
 	struct dccp_hdr_ack_bits	dccph_resp_ack;
@@ -91,8 +88,9 @@ struct dccp_hdr_response {
 /**
  * struct dccp_hdr_reset - Unconditionally shut down a connection
  *
- * @dccph_reset_service - Echoes the Service Code on a received DCCP-Request
- * @dccph_reset_options - list of options (must be a multiple of 32 bits
+ * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
+ * @dccph_reset_code - one of %dccp_reset_codes
+ * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
  */
 struct dccp_hdr_reset {
 	struct dccp_hdr_ack_bits	dccph_reset_ack;
@@ -204,6 +202,7 @@ struct dccp_so_feat {
 #define DCCP_SOCKOPT_SERVICE		2
 #define DCCP_SOCKOPT_CHANGE_L		3
 #define DCCP_SOCKOPT_CHANGE_R		4
+#define DCCP_SOCKOPT_GET_CUR_MPS	5
 #define DCCP_SOCKOPT_SEND_CSCOV		10
 #define DCCP_SOCKOPT_RECV_CSCOV		11
 #define DCCP_SOCKOPT_CCID_RX_INFO	128
@@ -215,6 +214,7 @@ struct dccp_so_feat {
 #ifdef __KERNEL__
 
 #include <linux/in.h>
+#include <linux/ktime.h>
 #include <linux/list.h>
 #include <linux/uio.h>
 #include <linux/workqueue.h>
@@ -391,7 +391,6 @@ struct dccp_opt_pend {
 	struct dccp_opt_conf    *dccpop_sc;
 };
 
-extern void __dccp_minisock_init(struct dccp_minisock *dmsk);
 extern void dccp_minisock_init(struct dccp_minisock *dmsk);
 
 extern int dccp_parse_options(struct sock *sk, struct sk_buff *skb);
@@ -471,6 +470,7 @@ struct dccp_ackvec;
  * @dccps_pcrlen - receiver partial checksum coverage (via sockopt)
  * @dccps_ndp_count - number of Non Data Packets since last data packet
  * @dccps_mss_cache - current value of MSS (path MTU minus header sizes)
+ * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4)
  * @dccps_minisock - associated minisock (accessed via dccp_msk)
  * @dccps_hc_rx_ackvec - rx half connection ack vector
  * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
@@ -498,7 +498,7 @@ struct dccp_sock {
 	__u64				dccps_gar;
 	__be32				dccps_service;
 	struct dccp_service_list	*dccps_service_list;
-	struct timeval			dccps_timestamp_time;
+	ktime_t				dccps_timestamp_time;
 	__u32				dccps_timestamp_echo;
 	__u16				dccps_l_ack_ratio;
 	__u16				dccps_r_ack_ratio;
@@ -506,12 +506,12 @@ struct dccp_sock {
 	__u16				dccps_pcrlen;
 	unsigned long			dccps_ndp_count;
 	__u32				dccps_mss_cache;
+	unsigned long			dccps_rate_last;
 	struct dccp_minisock		dccps_minisock;
 	struct dccp_ackvec		*dccps_hc_rx_ackvec;
 	struct ccid			*dccps_hc_rx_ccid;
 	struct ccid			*dccps_hc_tx_ccid;
 	struct dccp_options_received	dccps_options_received;
-	struct timeval			dccps_epoch;
 	enum dccp_role			dccps_role:2;
 	__u8				dccps_hc_rx_insert_options:1;
 	__u8				dccps_hc_tx_insert_options:1;
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 104e51e20e1..f592d6de3b9 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -49,6 +49,12 @@ struct dentry *debugfs_create_u32(const char *name, mode_t mode,
 				  struct dentry *parent, u32 *value);
 struct dentry *debugfs_create_u64(const char *name, mode_t mode,
 				  struct dentry *parent, u64 *value);
+struct dentry *debugfs_create_x8(const char *name, mode_t mode,
+				 struct dentry *parent, u8 *value);
+struct dentry *debugfs_create_x16(const char *name, mode_t mode,
+				  struct dentry *parent, u16 *value);
+struct dentry *debugfs_create_x32(const char *name, mode_t mode,
+				  struct dentry *parent, u32 *value);
 struct dentry *debugfs_create_bool(const char *name, mode_t mode,
 				  struct dentry *parent, u32 *value);
 
@@ -122,6 +128,27 @@ static inline struct dentry *debugfs_create_u64(const char *name, mode_t mode,
 	return ERR_PTR(-ENODEV);
 }
 
+static inline struct dentry *debugfs_create_x8(const char *name, mode_t mode,
+					       struct dentry *parent,
+					       u8 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_x16(const char *name, mode_t mode,
+						struct dentry *parent,
+						u16 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_x32(const char *name, mode_t mode,
+						struct dentry *parent,
+						u32 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
 static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode,
 						 struct dentry *parent,
 						 u32 *value)
diff --git a/include/linux/device.h b/include/linux/device.h
index 3a38d1f70cb..2e15822fe40 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -64,12 +64,9 @@ struct bus_type {
 	struct bus_attribute	* bus_attrs;
 	struct device_attribute	* dev_attrs;
 	struct driver_attribute	* drv_attrs;
-	struct bus_attribute drivers_autoprobe_attr;
-	struct bus_attribute drivers_probe_attr;
 
 	int		(*match)(struct device * dev, struct device_driver * drv);
-	int		(*uevent)(struct device *dev, char **envp,
-				  int num_envp, char *buffer, int buffer_size);
+	int		(*uevent)(struct device *dev, struct kobj_uevent_env *env);
 	int		(*probe)(struct device * dev);
 	int		(*remove)(struct device * dev);
 	void		(*shutdown)(struct device * dev);
@@ -189,10 +186,8 @@ struct class {
 	struct class_device_attribute	* class_dev_attrs;
 	struct device_attribute		* dev_attrs;
 
-	int	(*uevent)(struct class_device *dev, char **envp,
-			   int num_envp, char *buffer, int buffer_size);
-	int	(*dev_uevent)(struct device *dev, char **envp, int num_envp,
-				char *buffer, int buffer_size);
+	int	(*uevent)(struct class_device *dev, struct kobj_uevent_env *env);
+	int	(*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
 
 	void	(*release)(struct class_device *dev);
 	void	(*class_release)(struct class *class);
@@ -268,8 +263,7 @@ struct class_device {
 	struct attribute_group  ** groups;	/* optional groups */
 
 	void	(*release)(struct class_device *dev);
-	int	(*uevent)(struct class_device *dev, char **envp,
-			   int num_envp, char *buffer, int buffer_size);
+	int	(*uevent)(struct class_device *dev, struct kobj_uevent_env *env);
 	char	class_id[BUS_ID_SIZE];	/* unique to this class */
 };
 
@@ -337,8 +331,7 @@ extern void class_device_destroy(struct class *cls, dev_t devt);
 struct device_type {
 	const char *name;
 	struct attribute_group **groups;
-	int (*uevent)(struct device *dev, char **envp, int num_envp,
-		      char *buffer, int buffer_size);
+	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
 	void (*release)(struct device *dev);
 	int (*suspend)(struct device * dev, pm_message_t state);
 	int (*resume)(struct device * dev);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index b8ac7b01c45..00fc7a9c35e 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -54,7 +54,7 @@ struct dmi_strmatch {
 };
 
 struct dmi_system_id {
-	int (*callback)(struct dmi_system_id *);
+	int (*callback)(const struct dmi_system_id *);
 	const char *ident;
 	struct dmi_strmatch matches[4];
 	void *driver_data;
@@ -71,22 +71,22 @@ struct dmi_device {
 
 #ifdef CONFIG_DMI
 
-extern int dmi_check_system(struct dmi_system_id *list);
-extern char * dmi_get_system_info(int field);
-extern struct dmi_device * dmi_find_device(int type, const char *name,
-	struct dmi_device *from);
+extern int dmi_check_system(const struct dmi_system_id *list);
+extern const char * dmi_get_system_info(int field);
+extern const struct dmi_device * dmi_find_device(int type, const char *name,
+	const struct dmi_device *from);
 extern void dmi_scan_machine(void);
 extern int dmi_get_year(int field);
-extern int dmi_name_in_vendors(char *str);
+extern int dmi_name_in_vendors(const char *str);
 
 #else
 
-static inline int dmi_check_system(struct dmi_system_id *list) { return 0; }
-static inline char * dmi_get_system_info(int field) { return NULL; }
-static inline struct dmi_device * dmi_find_device(int type, const char *name,
-	struct dmi_device *from) { return NULL; }
+static inline int dmi_check_system(const struct dmi_system_id *list) { return 0; }
+static inline const char * dmi_get_system_info(int field) { return NULL; }
+static inline const struct dmi_device * dmi_find_device(int type, const char *name,
+	const struct dmi_device *from) { return NULL; }
 static inline int dmi_get_year(int year) { return 0; }
-static inline int dmi_name_in_vendors(char *s) { return 0; }
+static inline int dmi_name_in_vendors(const char *s) { return 0; }
 
 #endif
 
diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h
index d774b7778c9..a55c873e8b6 100644
--- a/include/linux/eeprom_93cx6.h
+++ b/include/linux/eeprom_93cx6.h
@@ -21,13 +21,14 @@
 /*
 	Module: eeprom_93cx6
 	Abstract: EEPROM reader datastructures for 93cx6 chipsets.
-	Supported chipsets: 93c46 & 93c66.
+	Supported chipsets: 93c46, 93c56 and 93c66.
  */
 
 /*
  * EEPROM operation defines.
  */
 #define PCI_EEPROM_WIDTH_93C46	6
+#define PCI_EEPROM_WIDTH_93C56	8
 #define PCI_EEPROM_WIDTH_93C66	8
 #define PCI_EEPROM_WIDTH_OPCODE	3
 #define PCI_EEPROM_WRITE_OPCODE	0x05
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 8b17ffe222c..d2da84acf45 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -389,12 +389,14 @@ extern Elf64_Dyn _DYNAMIC [];
 
 #endif
 
+/* Optional callbacks to write extra ELF notes. */
 #ifndef ARCH_HAVE_EXTRA_ELF_NOTES
-static inline int arch_notes_size(void) { return 0; }
-static inline void arch_write_notes(struct file *file) { }
-
-#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size()
-#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file)
-#endif /* ARCH_HAVE_EXTRA_ELF_NOTES */
+static inline int elf_coredump_extra_notes_size(void) { return 0; }
+static inline int elf_coredump_extra_notes_write(struct file *file,
+			loff_t *foffset) { return 0; }
+#else
+extern int elf_coredump_extra_notes_size(void);
+extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
+#endif
 
 #endif /* _LINUX_ELF_H */
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 6cdb97365e4..b7558ec81ed 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -29,15 +29,19 @@
 #include <linux/random.h>
 
 #ifdef __KERNEL__
-extern int		eth_header(struct sk_buff *skb, struct net_device *dev,
-				   unsigned short type, void *daddr,
-				   void *saddr, unsigned len);
-extern int		eth_rebuild_header(struct sk_buff *skb);
 extern __be16		eth_type_trans(struct sk_buff *skb, struct net_device *dev);
-extern void		eth_header_cache_update(struct hh_cache *hh, struct net_device *dev,
-						unsigned char * haddr);
-extern int		eth_header_cache(struct neighbour *neigh,
-					 struct hh_cache *hh);
+extern const struct header_ops eth_header_ops;
+
+extern int eth_header(struct sk_buff *skb, struct net_device *dev,
+		      unsigned short type,
+		      const void *daddr, const void *saddr, unsigned len);
+extern int eth_rebuild_header(struct sk_buff *skb);
+extern int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
+extern int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh);
+extern void eth_header_cache_update(struct hh_cache *hh,
+				    const struct net_device *dev,
+				    const unsigned char *haddr);
+
 
 extern struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count);
 #define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 23ccea81129..71d4ada6f31 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -39,7 +39,8 @@ struct ethtool_drvinfo {
 	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
 				/* For PCI devices, use pci_name(pci_dev). */
 	char	reserved1[32];
-	char	reserved2[16];
+	char	reserved2[12];
+	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
 	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
 	__u32	testinfo_len;
 	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
@@ -219,6 +220,7 @@ struct ethtool_pauseparam {
 enum ethtool_stringset {
 	ETH_SS_TEST		= 0,
 	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
 };
 
 /* for passing string sets for data tagging */
@@ -256,6 +258,19 @@ struct ethtool_perm_addr {
 	__u8	data[0];
 };
 
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+};
+
 #ifdef __KERNEL__
 
 struct net_device;
@@ -272,6 +287,8 @@ u32 ethtool_op_get_tso(struct net_device *dev);
 int ethtool_op_set_tso(struct net_device *dev, u32 data);
 u32 ethtool_op_get_ufo(struct net_device *dev);
 int ethtool_op_set_ufo(struct net_device *dev, u32 data);
+u32 ethtool_op_get_flags(struct net_device *dev);
+int ethtool_op_set_flags(struct net_device *dev, u32 data);
 
 /**
  * &ethtool_ops - Alter and report network device settings
@@ -307,6 +324,8 @@ int ethtool_op_set_ufo(struct net_device *dev, u32 data);
  * get_strings: Return a set of strings that describe the requested objects 
  * phys_id: Identify the device
  * get_stats: Return statistics about the device
+ * get_flags: get 32-bit flags bitmap
+ * set_flags: set 32-bit flags bitmap
  * 
  * Description:
  *
@@ -359,16 +378,23 @@ struct ethtool_ops {
 	int	(*set_sg)(struct net_device *, u32);
 	u32	(*get_tso)(struct net_device *);
 	int	(*set_tso)(struct net_device *, u32);
-	int	(*self_test_count)(struct net_device *);
 	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
 	int	(*phys_id)(struct net_device *, u32);
-	int	(*get_stats_count)(struct net_device *);
 	void	(*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
 	int	(*begin)(struct net_device *);
 	void	(*complete)(struct net_device *);
 	u32     (*get_ufo)(struct net_device *);
 	int     (*set_ufo)(struct net_device *, u32);
+	u32     (*get_flags)(struct net_device *);
+	int     (*set_flags)(struct net_device *, u32);
+	u32     (*get_priv_flags)(struct net_device *);
+	int     (*set_priv_flags)(struct net_device *, u32);
+	int	(*get_sset_count)(struct net_device *, int);
+
+	/* the following hooks are obsolete */
+	int	(*self_test_count)(struct net_device *);/* use get_sset_count */
+	int	(*get_stats_count)(struct net_device *);/* use get_sset_count */
 };
 #endif /* __KERNEL__ */
 
@@ -410,6 +436,10 @@ struct ethtool_ops {
 #define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
 #define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
 #define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 543cd3cd9e7..9bc045b8c47 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -16,6 +16,7 @@
 #ifndef FS_ENET_PD_H
 #define FS_ENET_PD_H
 
+#include <linux/string.h>
 #include <asm/types.h>
 
 #define FS_ENET_NAME	"fs_enet"
@@ -119,6 +120,7 @@ struct fs_platform_info {
 
 	u32 cp_page;		/* CPM page */
 	u32 cp_block;		/* CPM sblock */
+	u32 cp_command;		/* CPM page/sblock/mcn */
 
 	u32 clk_trx;		/* some stuff for pins & mux configuration*/
 	u32 clk_rx;
@@ -133,7 +135,11 @@ struct fs_platform_info {
 	u32 device_flags;
 
 	int phy_addr;		/* the phy address (-1 no phy) */
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+	char bus_id[16];
+#else
 	const char*	bus_id;
+#endif
 	int phy_irq;		/* the phy irq (if it exists)  */
 
 	const struct fs_mii_bus_info *bus_info;
diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h
index a44a6a078f0..c3c19f926e6 100644
--- a/include/linux/gfs2_ondisk.h
+++ b/include/linux/gfs2_ondisk.h
@@ -170,6 +170,33 @@ struct gfs2_rgrp {
 };
 
 /*
+ * quota linked list: user quotas and group quotas form two separate 
+ * singly linked lists. ll_next stores uids or gids of next quotas in the 
+ * linked list.
+
+Given the uid/gid, how to calculate the quota file offsets for the corresponding
+gfs2_quota structures on disk:
+
+for user quotas, given uid,
+offset = uid * sizeof(struct gfs2_quota);
+
+for group quotas, given gid,
+offset = (gid * sizeof(struct gfs2_quota)) + sizeof(struct gfs2_quota);
+
+
+  uid:0   gid:0       uid:12   gid:12      uid:17   gid:17     uid:5142 gid:5142
++-------+-------+    +-------+-------+    +-------+- - - -+    +- - - -+-------+
+| valid | valid | :: | valid | valid | :: | valid | inval | :: | inval | valid |
++-------+-------+    +-------+-------+    +-------+- - - -+    +- - - -+-------+
+next:12   next:12    next:17 next:5142    next:NULL                    next:NULL
+    |       |            |       |            |<-- user quota list         |
+     \______|___________/ \______|___________/         group quota list -->|
+            |                    |                                         |
+             \__________________/ \_______________________________________/
+
+*/
+
+/*
  * quota structure
  */
 
@@ -177,7 +204,8 @@ struct gfs2_quota {
 	__be64 qu_limit;
 	__be64 qu_warn;
 	__be64 qu_value;
-	__u8 qu_reserved[64];
+	__be32 qu_ll_next; /* location of next quota in list */
+	__u8 qu_reserved[60];
 };
 
 /*
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index b6901486571..a271b67a8e2 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -119,6 +119,7 @@
 #define I2C_DRIVERID_WM8750	90	/* Wolfson WM8750 audio codec */
 #define I2C_DRIVERID_WM8753	91	/* Wolfson WM8753 audio codec */
 #define I2C_DRIVERID_LM4857 	92 	/* LM4857 Audio Amplifier */
+#define I2C_DRIVERID_VP27SMPX	93	/* Panasonic VP27s tuner internal MPX */
 
 #define I2C_DRIVERID_I2CDEV	900
 #define I2C_DRIVERID_ARP        902    /* SMBus ARP Client              */
@@ -196,6 +197,7 @@
 #define I2C_HW_B_EM28XX		0x01001f /* em28xx video capture cards */
 #define I2C_HW_B_CX2341X	0x010020 /* Conexant CX2341X MPEG encoder cards */
 #define I2C_HW_B_INTELFB	0x010021 /* intel framebuffer driver */
+#define I2C_HW_B_CX23885	0x010022 /* conexant 23885 based tv cards (bus1) */
 
 /* --- PCF 8584 based algorithms					*/
 #define I2C_HW_P_LP		0x020000 /* Parallel port interface */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index b9f66c10caa..85d448b4abe 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -634,7 +634,7 @@ typedef struct ide_drive_s {
 
 	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
 	unsigned int	cyl;		/* "real" number of cyls */
-	unsigned int	drive_data;	/* use by tuneproc/selectproc */
+	unsigned int	drive_data;	/* used by set_pio_mode/selectproc */
 	unsigned int	failures;	/* current failure count */
 	unsigned int	max_failures;	/* maximum allowed failure count */
 	u64		probed_capacity;/* initial reported media capacity (ide-cd only currently) */
@@ -702,10 +702,10 @@ typedef struct hwif_s {
 #if 0
 	ide_hwif_ops_t	*hwifops;
 #else
-	/* routine to tune PIO mode for drives */
-	void	(*tuneproc)(ide_drive_t *, u8);
+	/* routine to set PIO mode for drives */
+	void	(*set_pio_mode)(ide_drive_t *, const u8);
 	/* routine to retune DMA modes for drives */
-	int	(*speedproc)(ide_drive_t *, u8);
+	int	(*speedproc)(ide_drive_t *, const u8);
 	/* tweaks hardware to select drive */
 	void	(*selectproc)(ide_drive_t *);
 	/* chipset polling based on hba specifics */
@@ -723,6 +723,7 @@ typedef struct hwif_s {
 	/* driver soft-power interface */
 	int	(*busproc)(ide_drive_t *, int);
 #endif
+	u8 (*mdma_filter)(ide_drive_t *);
 	u8 (*udma_filter)(ide_drive_t *);
 
 	void (*ata_input_data)(ide_drive_t *, void *, u32);
@@ -1255,6 +1256,12 @@ enum {
 	IDE_HFLAG_PIO_NO_BLACKLIST	= (1 << 2),
 	/* don't use conservative PIO "downgrade" */
 	IDE_HFLAG_PIO_NO_DOWNGRADE	= (1 << 3),
+	/* use PIO8/9 for prefetch off/on */
+	IDE_HFLAG_ABUSE_PREFETCH	= (1 << 4),
+	/* use PIO6/7 for fast-devsel off/on */
+	IDE_HFLAG_ABUSE_FAST_DEVSEL	= (1 << 5),
+	/* use 100-102 and 200-202 PIO values to set DMA modes */
+	IDE_HFLAG_ABUSE_DMA_MODES	= (1 << 6),
 };
 
 typedef struct ide_pci_device_s {
@@ -1295,7 +1302,14 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
 #ifdef CONFIG_BLK_DEV_IDEDMA
 int __ide_dma_bad_drive(ide_drive_t *);
 int __ide_dma_good_drive(ide_drive_t *);
-u8 ide_max_dma_mode(ide_drive_t *);
+
+u8 ide_find_dma_mode(ide_drive_t *, u8);
+
+static inline u8 ide_max_dma_mode(ide_drive_t *drive)
+{
+	return ide_find_dma_mode(drive, XFER_UDMA_6);
+}
+
 int ide_tune_dma(ide_drive_t *);
 void ide_dma_off(ide_drive_t *);
 void ide_dma_verbose(ide_drive_t *);
@@ -1321,6 +1335,7 @@ extern void ide_dma_timeout(ide_drive_t *);
 #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
 
 #else
+static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
 static inline int ide_tune_dma(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off(ide_drive_t *drive) { ; }
@@ -1337,11 +1352,13 @@ extern int ide_acpi_exec_tfs(ide_drive_t *drive);
 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
 extern void ide_acpi_init(ide_hwif_t *hwif);
+extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
 #else
 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
 static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
 #endif
 
 extern int ide_hwif_request_regions(ide_hwif_t *hwif);
@@ -1367,7 +1384,6 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
 }
 
 /* ide-lib.c */
-u8 ide_rate_filter(ide_drive_t *, u8);
 extern char *ide_xfer_verbose(u8 xfer_rate);
 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
@@ -1404,6 +1420,12 @@ unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
 extern const ide_pio_timings_t ide_pio_timings[6];
 
+void ide_set_pio(ide_drive_t *, u8);
+
+static inline void ide_set_max_pio(ide_drive_t *drive)
+{
+	ide_set_pio(drive, 255);
+}
 
 extern spinlock_t ide_lock;
 extern struct mutex ide_cfg_mtx;
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 272f8c8c90d..30621c27159 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -16,6 +16,7 @@
 #define IEEE80211_H
 
 #include <linux/types.h>
+#include <asm/byteorder.h>
 
 #define FCS_LEN 4
 
@@ -350,4 +351,64 @@ enum ieee80211_eid {
 
 #define WLAN_MAX_KEY_LEN		32
 
+/**
+ * ieee80211_get_SA - get pointer to SA
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the source address (SA). It does not verify that the
+ * header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ *
+ * @hdr: the frame
+ */
+static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
+{
+	u8 *raw = (u8 *) hdr;
+	u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */
+
+	switch (tofrom) {
+		case 2:
+			return hdr->addr3;
+		case 3:
+			return hdr->addr4;
+	}
+	return hdr->addr2;
+}
+
+/**
+ * ieee80211_get_DA - get pointer to DA
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the destination address (DA). It does not verify that
+ * the header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ *
+ * @hdr: the frame
+ */
+static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
+{
+	u8 *raw = (u8 *) hdr;
+	u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */
+
+	if (to_ds)
+		return hdr->addr3;
+	return hdr->addr1;
+}
+
+/**
+ * ieee80211_get_morefrag - determine whether the MOREFRAGS bit is set
+ *
+ * This function determines whether the "more fragments" bit is set
+ * in the frame.
+ *
+ * @hdr: the frame
+ */
+static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr)
+{
+	return (le16_to_cpu(hdr->frame_control) &
+		IEEE80211_FCTL_MOREFRAGS) != 0;
+}
+
 #endif /* IEEE80211_H */
diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h
index af380cb876a..27ea2ac445a 100644
--- a/include/linux/if_arcnet.h
+++ b/include/linux/if_arcnet.h
@@ -59,7 +59,7 @@ struct arc_rfc1201
 {
     uint8_t  proto;		/* protocol ID field - varies		*/
     uint8_t  split_flag;	/* for use with split packets		*/
-    uint16_t sequence;		/* sequence number			*/
+    __be16   sequence;		/* sequence number			*/
     uint8_t  payload[0];	/* space remaining in packet (504 bytes)*/
 };
 #define RFC1201_HDR_SIZE 4
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index 4ff211d9876..99e3a1a0009 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -104,7 +104,7 @@ struct __fdb_entry
 
 #include <linux/netdevice.h>
 
-extern void brioctl_set(int (*ioctl_hook)(unsigned int, void __user *));
+extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
 extern struct sk_buff *(*br_handle_frame_hook)(struct net_bridge_port *p,
 					       struct sk_buff *skb);
 extern int (*br_should_route_hook)(struct sk_buff **pskb);
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
index b68752fdc5c..79c4f268410 100644
--- a/include/linux/if_eql.h
+++ b/include/linux/if_eql.h
@@ -58,7 +58,6 @@ typedef struct equalizer {
 	slave_queue_t		queue;
 	int			min_slaves;
 	int			max_slaves;
-	struct net_device_stats	stats;
 	struct timer_list	timer;
 } equalizer_t;  
 
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 3213f6f4aa5..5f929779366 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -117,9 +117,19 @@ static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
 	return (struct ethhdr *)skb_mac_header(skb);
 }
 
+int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
+
 #ifdef CONFIG_SYSCTL
 extern struct ctl_table ether_table[];
 #endif
+
+/*
+ *	Display a 6 byte device address (MAC) in a readable format.
+ */
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+extern char *print_mac(char *buf, const u8 *addr);
+#define DECLARE_MAC_BUF(var) char var[18] __maybe_unused
+
 #endif
 
 #endif	/* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 422084d18ce..84c3492ae5c 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -78,6 +78,7 @@ enum
 	IFLA_LINKMODE,
 	IFLA_LINKINFO,
 #define IFLA_LINKINFO IFLA_LINKINFO
+	IFLA_NET_NS_PID,
 	__IFLA_MAX
 };
 
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 25652545ba6..40743e03284 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -40,7 +40,7 @@
 /************************************************************************ 
  * PPPoE addressing definition 
  */ 
-typedef __u16 sid_t; 
+typedef __be16 sid_t;
 struct pppoe_addr{ 
        sid_t           sid;                    /* Session identifier */ 
        unsigned char   remote[ETH_ALEN];       /* Remote address */ 
@@ -90,8 +90,8 @@ struct sockaddr_pppol2tp {
 #define PADS_CODE	0x65
 #define PADT_CODE	0xa7
 struct pppoe_tag {
-	__u16 tag_type;
-	__u16 tag_len;
+	__be16 tag_type;
+	__be16 tag_len;
 	char tag_data[0];
 } __attribute ((packed));
 
@@ -118,8 +118,8 @@ struct pppoe_hdr {
 #error	"Please fix <asm/byteorder.h>"
 #endif
 	__u8 code;
-	__u16 sid;
-	__u16 length;
+	__be16 sid;
+	__be16 length;
 	struct pppoe_tag tag[0];
 } __attribute__ ((packed));
 
@@ -152,7 +152,7 @@ struct pppox_sock {
 	union {
 		struct pppoe_opt pppoe;
 	} proto;
-	unsigned short		num;
+	__be16			num;
 };
 #define pppoe_dev	proto.pppoe.dev
 #define pppoe_ifindex	proto.pppoe.ifindex
@@ -172,7 +172,7 @@ static inline struct sock *sk_pppox(struct pppox_sock *po)
 struct module;
 
 struct pppox_proto {
-	int		(*create)(struct socket *sock);
+	int		(*create)(struct net *net, struct socket *sock);
 	int		(*ioctl)(struct socket *sock, unsigned int cmd,
 				 unsigned long arg);
 	struct module	*owner;
diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h
index 68c896a36a3..3b1b7ba1982 100644
--- a/include/linux/if_shaper.h
+++ b/include/linux/if_shaper.h
@@ -24,19 +24,7 @@ struct shaper
 	unsigned long recovery;	/* Time we can next clock a packet out on
 				   an empty queue */
 	spinlock_t lock;
-        struct net_device_stats stats;
 	struct net_device *dev;
-	int  (*hard_start_xmit) (struct sk_buff *skb,
-		struct net_device *dev);
-	int  (*hard_header) (struct sk_buff *skb,
-		struct net_device *dev,
-		unsigned short type,
-		void *daddr,
-		void *saddr,
-		unsigned len);
-	int  (*rebuild_header)(struct sk_buff *skb);
-	int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh);
-	void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char *  haddr);
 	struct net_device_stats* (*get_stats)(struct net_device *dev);
 	struct timer_list timer;
 };
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 42eb6945b93..33e489d5bb3 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -42,7 +42,6 @@ struct tun_struct {
 	struct sk_buff_head	readq;
 
 	struct net_device	*dev;
-	struct net_device_stats	stats;
 
 	struct fasync_struct    *fasync;
 
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index f8443fdb124..976d4b1067d 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -62,7 +62,7 @@ struct vlan_hdr {
 #define VLAN_VID_MASK	0xfff
 
 /* found in socket.c */
-extern void vlan_ioctl_set(int (*hook)(void __user *));
+extern void vlan_ioctl_set(int (*hook)(struct net *, void __user *));
 
 #define VLAN_NAME "vlan"
 
diff --git a/include/linux/inet_lro.h b/include/linux/inet_lro.h
new file mode 100644
index 00000000000..e1fc1d16d3c
--- /dev/null
+++ b/include/linux/inet_lro.h
@@ -0,0 +1,177 @@
+/*
+ *  linux/include/linux/inet_lro.h
+ *
+ *  Large Receive Offload (ipv4 / tcp)
+ *
+ *  (C) Copyright IBM Corp. 2007
+ *
+ *  Authors:
+ *       Jan-Bernd Themann <themann@de.ibm.com>
+ *       Christoph Raisch <raisch@de.ibm.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __INET_LRO_H_
+#define __INET_LRO_H_
+
+#include <net/ip.h>
+#include <net/tcp.h>
+
+/*
+ * LRO statistics
+ */
+
+struct net_lro_stats {
+	unsigned long aggregated;
+	unsigned long flushed;
+	unsigned long no_desc;
+};
+
+/*
+ * LRO descriptor for a tcp session
+ */
+struct net_lro_desc {
+	struct sk_buff *parent;
+	struct sk_buff *last_skb;
+	struct skb_frag_struct *next_frag;
+	struct iphdr *iph;
+	struct tcphdr *tcph;
+	struct vlan_group *vgrp;
+	__wsum  data_csum;
+	u32 tcp_rcv_tsecr;
+	u32 tcp_rcv_tsval;
+	u32 tcp_ack;
+	u32 tcp_next_seq;
+	u32 skb_tot_frags_len;
+	u16 ip_tot_len;
+	u16 tcp_saw_tstamp; 		/* timestamps enabled */
+	u16 tcp_window;
+	u16 vlan_tag;
+	int pkt_aggr_cnt;		/* counts aggregated packets */
+	int vlan_packet;
+	int mss;
+	int active;
+};
+
+/*
+ * Large Receive Offload (LRO) Manager
+ *
+ * Fields must be set by driver
+ */
+
+struct net_lro_mgr {
+	struct net_device *dev;
+	struct net_lro_stats stats;
+
+	/* LRO features */
+	unsigned long features;
+#define LRO_F_NAPI            1  /* Pass packets to stack via NAPI */
+#define LRO_F_EXTRACT_VLAN_ID 2  /* Set flag if VLAN IDs are extracted
+				    from received packets and eth protocol
+				    is still ETH_P_8021Q */
+
+	u32 ip_summed;      /* Set in non generated SKBs in page mode */
+	u32 ip_summed_aggr; /* Set in aggregated SKBs: CHECKSUM_UNNECESSARY
+			     * or CHECKSUM_NONE */
+
+	int max_desc; /* Max number of LRO descriptors  */
+	int max_aggr; /* Max number of LRO packets to be aggregated */
+
+	struct net_lro_desc *lro_arr; /* Array of LRO descriptors */
+
+	/*
+	 * Optimized driver functions
+	 *
+	 * get_skb_header: returns tcp and ip header for packet in SKB
+	 */
+	int (*get_skb_header)(struct sk_buff *skb, void **ip_hdr,
+			      void **tcpudp_hdr, u64 *hdr_flags, void *priv);
+
+	/* hdr_flags: */
+#define LRO_IPV4 1 /* ip_hdr is IPv4 header */
+#define LRO_TCP  2 /* tcpudp_hdr is TCP header */
+
+	/*
+	 * get_frag_header: returns mac, tcp and ip header for packet in SKB
+	 *
+	 * @hdr_flags: Indicate what kind of LRO has to be done
+	 *             (IPv4/IPv6/TCP/UDP)
+	 */
+	int (*get_frag_header)(struct skb_frag_struct *frag, void **mac_hdr,
+			       void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
+			       void *priv);
+};
+
+/*
+ * Processes a SKB
+ *
+ * @lro_mgr: LRO manager to use
+ * @skb: SKB to aggregate
+ * @priv: Private data that may be used by driver functions
+ *        (for example get_tcp_ip_hdr)
+ */
+
+void lro_receive_skb(struct net_lro_mgr *lro_mgr,
+		     struct sk_buff *skb,
+		     void *priv);
+
+/*
+ * Processes a SKB with VLAN HW acceleration support
+ */
+
+void lro_vlan_hwaccel_receive_skb(struct net_lro_mgr *lro_mgr,
+				  struct sk_buff *skb,
+				  struct vlan_group *vgrp,
+				  u16 vlan_tag,
+				  void *priv);
+
+/*
+ * Processes a fragment list
+ *
+ * This functions aggregate fragments and generate SKBs do pass
+ * the packets to the stack.
+ *
+ * @lro_mgr: LRO manager to use
+ * @frags: Fragment to be processed. Must contain entire header in first
+ *         element.
+ * @len: Length of received data
+ * @true_size: Actual size of memory the fragment is consuming
+ * @priv: Private data that may be used by driver functions
+ *        (for example get_tcp_ip_hdr)
+ */
+
+void lro_receive_frags(struct net_lro_mgr *lro_mgr,
+		       struct skb_frag_struct *frags,
+		       int len, int true_size, void *priv, __wsum sum);
+
+void lro_vlan_hwaccel_receive_frags(struct net_lro_mgr *lro_mgr,
+				    struct skb_frag_struct *frags,
+				    int len, int true_size,
+				    struct vlan_group *vgrp,
+				    u16 vlan_tag,
+				    void *priv, __wsum sum);
+
+/*
+ * Forward all aggregated SKBs held by lro_mgr to network stack
+ */
+
+void lro_flush_all(struct net_lro_mgr *lro_mgr);
+
+void lro_flush_pkt(struct net_lro_mgr *lro_mgr,
+		   struct iphdr *iph, struct tcphdr *tcph);
+
+#endif
diff --git a/include/linux/init.h b/include/linux/init.h
index 74b1f43bf98..f8d9d0b5cff 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -57,6 +57,7 @@
  * The markers follow same syntax rules as __init / __initdata. */
 #define __init_refok     noinline __attribute__ ((__section__ (".text.init.refok")))
 #define __initdata_refok          __attribute__ ((__section__ (".data.init.refok")))
+#define __exit_refok     noinline __attribute__ ((__section__ (".exit.text.refok")))
 
 #ifdef MODULE
 #define __exit		__attribute__ ((__section__(".exit.text"))) __cold
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index f8abfa349ef..513bc3e489f 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -9,6 +9,7 @@
 #include <linux/ipc.h>
 #include <linux/pid_namespace.h>
 #include <linux/user_namespace.h>
+#include <net/net_namespace.h>
 
 #define INIT_FDTABLE \
 {							\
@@ -78,6 +79,7 @@ extern struct nsproxy init_nsproxy;
 	.nslock		= __SPIN_LOCK_UNLOCKED(nsproxy.nslock),		\
 	.uts_ns		= &init_uts_ns,					\
 	.mnt_ns		= NULL,						\
+	INIT_NET_NS(net_ns)                                             \
 	INIT_IPC_NS(ipc_ns)						\
 	.user_ns	= &init_user_ns,				\
 }
diff --git a/include/linux/input.h b/include/linux/input.h
index 36e00aa6f03..6eb3aead7f1 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -360,6 +360,7 @@ struct input_absinfo {
 
 #define KEY_BLUETOOTH		237
 #define KEY_WLAN		238
+#define KEY_UWB			239
 
 #define KEY_UNKNOWN		240
 
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 4ca60c3320f..5d35a4cc3bf 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -96,27 +96,6 @@ struct ipv6_destopt_hao {
 	struct in6_addr		addr;
 } __attribute__ ((__packed__));
 
-struct ipv6_auth_hdr {
-	__u8  nexthdr;
-	__u8  hdrlen;           /* This one is measured in 32 bit units! */
-	__be16 reserved;
-	__be32 spi;
-	__be32 seq_no;           /* Sequence number */
-	__u8  auth_data[0];     /* Length variable but >=4. Mind the 64 bit alignment! */
-};
-
-struct ipv6_esp_hdr {
-	__be32 spi;
-	__be32 seq_no;           /* Sequence number */
-	__u8  enc_data[0];      /* Length variable but >=8. Mind the 64 bit alignment! */
-};
-
-struct ipv6_comp_hdr {
-	__u8 nexthdr;
-	__u8 flags;
-	__be16 cpi;
-};
-
 /*
  *	IPv6 fixed header
  *
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 3c7875b7ab5..ad09506554a 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -353,13 +353,6 @@ typedef struct isdn_net_local_s {
                                        /* a particular channel (including  */
                                        /* the frame_cnt                    */
 
-  int                    (*org_hhc)(
-				    struct neighbour *neigh,
-				    struct hh_cache *hh);
-                                       /* Ptr to orig. header_cache_update */
-  void                   (*org_hcu)(struct hh_cache *,
-				    struct net_device *,
-                                    unsigned char *);
   int  pppbind;                        /* ippp device for bindings         */
   int					dialtimeout;	/* How long shall we try on dialing? (jiffies) */
   int					dialwait;		/* How long shall we wait after failed attempt? (jiffies) */
@@ -389,7 +382,7 @@ typedef struct isdn_net_dev_s {
 					  online                           */
   spinlock_t queue_lock;               /* lock to protect queue            */
   void *next;                          /* Pointer to next isdn-interface   */
-  struct net_device dev;               /* interface to upper levels        */
+  struct net_device *dev;              /* interface to upper levels        */
 #ifdef CONFIG_ISDN_PPP
   ippp_bundle * pb;		/* pointer to the common bundle structure
    			         * with the per-bundle data */
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
new file mode 100644
index 00000000000..794b8daa937
--- /dev/null
+++ b/include/linux/ivtv.h
@@ -0,0 +1,72 @@
+/*
+    Public ivtv API header
+    Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
+    Copyright (C) 2004-2007  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_IVTV_H__
+#define __LINUX_IVTV_H__
+
+#ifdef __KERNEL__
+#include <linux/compiler.h> /* need __user */
+#else
+#define __user
+#endif
+#include <linux/types.h>
+
+/* ivtv knows several distinct output modes: MPEG streaming,
+   YUV streaming, YUV updates through user DMA and the passthrough
+   mode.
+
+   In order to clearly tell the driver that we are in user DMA
+   YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
+   first (althrough if you don't then the first time
+   DMA_FRAME is called the mode switch is done automatically).
+
+   When you close the file handle the user DMA mode is exited again.
+
+   While in one mode, you cannot use another mode (EBUSY is returned).
+
+   All this means that if you want to change the YUV interlacing
+   for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
+   with y_source == NULL before you can set the correct format using
+   VIDIOC_S_FMT.
+
+   Eventually all this should be replaced with a proper V4L2 API,
+   but for now we have to do it this way. */
+
+struct ivtv_dma_frame {
+	enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
+	__u32 pixelformat;	 /* 0 == same as destination */
+	void __user *y_source;   /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
+				    then just switch to user DMA YUV output mode */
+	void __user *uv_source;  /* Unused for RGB pixelformats */
+	struct v4l2_rect src;
+	struct v4l2_rect dst;
+	__u32 src_width;
+	__u32 src_height;
+};
+
+#define IVTV_IOC_DMA_FRAME  _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
+
+/* These are the VBI types as they appear in the embedded VBI private packets. */
+#define IVTV_SLICED_TYPE_TELETEXT_B     (1)
+#define IVTV_SLICED_TYPE_CAPTION_525    (4)
+#define IVTV_SLICED_TYPE_WSS_625        (5)
+#define IVTV_SLICED_TYPE_VPS            (7)
+
+#endif /* _LINUX_IVTV_H */
diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h
new file mode 100644
index 00000000000..e980ba62ddc
--- /dev/null
+++ b/include/linux/ivtvfb.h
@@ -0,0 +1,42 @@
+/*
+    On Screen Display cx23415 Framebuffer driver
+
+    Copyright (C) 2006, 2007  Ian Armstrong <ian@iarmst.demon.co.uk>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_IVTVFB_H__
+#define __LINUX_IVTVFB_H__
+
+#ifdef __KERNEL__
+#include <linux/compiler.h> /* need __user */
+#else
+#define __user
+#endif
+#include <linux/types.h>
+
+/* Framebuffer external API */
+
+struct ivtvfb_dma_frame {
+	void __user *source;
+	unsigned long dest_offset;
+	int count;
+};
+
+#define IVTVFB_IOC_DMA_FRAME 	_IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame)
+#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, u_int32_t)
+
+#endif
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index c080f61fb02..d7a5e034c3a 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -36,8 +36,6 @@
 /* LATCH is used in the interval timer and ftape setup. */
 #define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
 
-#define LATCH_HPET ((HPET_TICK_RATE + HZ/2) / HZ)
-
 /* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
  * improve accuracy by shifting LSH bits, hence calculating:
  *     (NOM << LSH) / DEN
@@ -53,13 +51,9 @@
 /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
 #define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
 
-#define ACTHZ_HPET (SH_DIV (HPET_TICK_RATE, LATCH_HPET, 8))
-
 /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
 #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
 
-#define TICK_NSEC_HPET (SH_DIV(1000000UL * 1000, ACTHZ_HPET, 8))
-
 /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
 #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
 
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 47160fe378c..d9725a28a26 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -42,6 +42,20 @@ extern const char linux_proc_banner[];
 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
 #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
 
+#ifdef CONFIG_LBD
+# include <asm/div64.h>
+# define sector_div(a, b) do_div(a, b)
+#else
+# define sector_div(n, b)( \
+{ \
+	int _res; \
+	_res = (n) % (b); \
+	(n) /= (b); \
+	_res; \
+} \
+)
+#endif
+
 /**
  * upper_32_bits - return bits 32-63 of a number
  * @n: the number we're accessing
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 949706c3362..4a0d27f475d 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -1,8 +1,10 @@
 /*
  * kobject.h - generic kernel object infrastructure.
  *
- * Copyright (c) 2002-2003	Patrick Mochel
- * Copyright (c) 2002-2003	Open Source Development Labs
+ * Copyright (c) 2002-2003 Patrick Mochel
+ * Copyright (c) 2002-2003 Open Source Development Labs
+ * Copyright (c) 2006-2007 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (c) 2006-2007 Novell Inc.
  *
  * This file is released under the GPLv2.
  *
@@ -29,6 +31,8 @@
 
 #define KOBJ_NAME_LEN			20
 #define UEVENT_HELPER_PATH_LEN		256
+#define UEVENT_NUM_ENVP			32	/* number of env pointers */
+#define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
 
 /* path to the userspace helper executed on an event */
 extern char uevent_helper[];
@@ -56,19 +60,14 @@ enum kobject_action {
 	KOBJ_MAX
 };
 
-/* The list of strings defining the valid kobject actions as specified above */
-extern const char *kobject_actions[];
-
 struct kobject {
 	const char		* k_name;
-	char			name[KOBJ_NAME_LEN];
 	struct kref		kref;
 	struct list_head	entry;
 	struct kobject		* parent;
 	struct kset		* kset;
 	struct kobj_type	* ktype;
 	struct sysfs_dirent	* sd;
-	wait_queue_head_t	poll;
 };
 
 extern int kobject_set_name(struct kobject *, const char *, ...)
@@ -83,14 +82,9 @@ extern void kobject_init(struct kobject *);
 extern void kobject_cleanup(struct kobject *);
 
 extern int __must_check kobject_add(struct kobject *);
-extern int __must_check kobject_shadow_add(struct kobject *kobj,
-					   struct sysfs_dirent *shadow_parent);
 extern void kobject_del(struct kobject *);
 
 extern int __must_check kobject_rename(struct kobject *, const char *new_name);
-extern int __must_check kobject_shadow_rename(struct kobject *kobj,
-					      struct sysfs_dirent *new_parent,
-					      const char *new_name);
 extern int __must_check kobject_move(struct kobject *, struct kobject *);
 
 extern int __must_check kobject_register(struct kobject *);
@@ -111,36 +105,44 @@ struct kobj_type {
 	struct attribute	** default_attrs;
 };
 
+struct kobj_uevent_env {
+	char *envp[UEVENT_NUM_ENVP];
+	int envp_idx;
+	char buf[UEVENT_BUFFER_SIZE];
+	int buflen;
+};
+
 struct kset_uevent_ops {
 	int (*filter)(struct kset *kset, struct kobject *kobj);
 	const char *(*name)(struct kset *kset, struct kobject *kobj);
-	int (*uevent)(struct kset *kset, struct kobject *kobj, char **envp,
-			int num_envp, char *buffer, int buffer_size);
+	int (*uevent)(struct kset *kset, struct kobject *kobj,
+		      struct kobj_uevent_env *env);
 };
 
-/*
- *	struct kset - a set of kobjects of a specific type, belonging
- *	to a specific subsystem.
- *
- *	All kobjects of a kset should be embedded in an identical 
- *	type. This type may have a descriptor, which the kset points
- *	to. This allows there to exist sets of objects of the same
- *	type in different subsystems.
+/**
+ * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem.
  *
- *	A subsystem does not have to be a list of only one type 
- *	of object; multiple ksets can belong to one subsystem. All 
- *	ksets of a subsystem share the subsystem's lock.
+ * A kset defines a group of kobjects.  They can be individually
+ * different "types" but overall these kobjects all want to be grouped
+ * together and operated on in the same manner.  ksets are used to
+ * define the attribute callbacks and other common events that happen to
+ * a kobject.
  *
- *	Each kset can support specific event variables; it can
- *	supress the event generation or add subsystem specific
- *	variables carried with the event.
+ * @ktype: the struct kobj_type for this specific kset
+ * @list: the list of all kobjects for this kset
+ * @list_lock: a lock for iterating over the kobjects
+ * @kobj: the embedded kobject for this kset (recursion, isn't it fun...)
+ * @uevent_ops: the set of uevent operations for this kset.  These are
+ * called whenever a kobject has something happen to it so that the kset
+ * can add new environment variables, or filter out the uevents if so
+ * desired.
  */
 struct kset {
-	struct kobj_type	* ktype;
+	struct kobj_type	*ktype;
 	struct list_head	list;
 	spinlock_t		list_lock;
 	struct kobject		kobj;
-	struct kset_uevent_ops	* uevent_ops;
+	struct kset_uevent_ops	*uevent_ops;
 };
 
 
@@ -179,18 +181,18 @@ extern struct kobject * kset_find_obj(struct kset *, const char *);
  * Use this when initializing an embedded kset with no other 
  * fields to initialize.
  */
-#define set_kset_name(str)	.kset = { .kobj = { .name = str } }
+#define set_kset_name(str)	.kset = { .kobj = { .k_name = str } }
 
 
 #define decl_subsys(_name,_type,_uevent_ops) \
 struct kset _name##_subsys = { \
-	.kobj = { .name = __stringify(_name) }, \
+	.kobj = { .k_name = __stringify(_name) }, \
 	.ktype = _type, \
 	.uevent_ops =_uevent_ops, \
 }
 #define decl_subsys_name(_varname,_name,_type,_uevent_ops) \
 struct kset _varname##_subsys = { \
-	.kobj = { .name = __stringify(_name) }, \
+	.kobj = { .k_name = __stringify(_name) }, \
 	.ktype = _type, \
 	.uevent_ops =_uevent_ops, \
 }
@@ -218,49 +220,9 @@ extern struct kset hypervisor_subsys;
 #define kobj_set_kset_s(obj,subsys) \
 	(obj)->kobj.kset = &(subsys)
 
-/**
- *	kset_set_kset_s(obj,subsys) - set kset for embedded kset.
- *	@obj:		ptr to some object type.
- *	@subsys:	a subsystem object (not a ptr).
- *
- *	Can be used for any object type with an embedded ->kset.
- *	Sets the kset of @obj's  embedded kobject (via its embedded
- *	kset) to @subsys.kset. This makes @obj a member of that 
- *	kset.
- */
-
-#define kset_set_kset_s(obj,subsys) \
-	(obj)->kset.kobj.kset = &(subsys)
-
-/**
- *	subsys_set_kset(obj,subsys) - set kset for subsystem
- *	@obj:		ptr to some object type.
- *	@_subsys:	a subsystem object (not a ptr).
- *
- *	Can be used for any object type with an embedded ->subsys.
- *	Sets the kset of @obj's kobject to @subsys.kset. This makes
- *	the object a member of that kset.
- */
-
-#define subsys_set_kset(obj,_subsys) \
-	(obj)->subsys.kobj.kset = &(_subsys)
-
-extern void subsystem_init(struct kset *);
 extern int __must_check subsystem_register(struct kset *);
 extern void subsystem_unregister(struct kset *);
 
-static inline struct kset *subsys_get(struct kset *s)
-{
-	if (s)
-		return kset_get(s);
-	return NULL;
-}
-
-static inline void subsys_put(struct kset *s)
-{
-	kset_put(s);
-}
-
 struct subsys_attribute {
 	struct attribute attr;
 	ssize_t (*show)(struct kset *, char *);
@@ -275,10 +237,11 @@ int kobject_uevent(struct kobject *kobj, enum kobject_action action);
 int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
 			char *envp[]);
 
-int add_uevent_var(char **envp, int num_envp, int *cur_index,
-			char *buffer, int buffer_size, int *cur_len,
-			const char *format, ...)
-	__attribute__((format (printf, 7, 8)));
+int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
+	__attribute__((format (printf, 2, 3)));
+
+int kobject_action_type(const char *buf, size_t count,
+			enum kobject_action *type);
 #else
 static inline int kobject_uevent(struct kobject *kobj, enum kobject_action action)
 { return 0; }
@@ -287,10 +250,12 @@ static inline int kobject_uevent_env(struct kobject *kobj,
 				      char *envp[])
 { return 0; }
 
-static inline int add_uevent_var(char **envp, int num_envp, int *cur_index,
-				      char *buffer, int buffer_size, int *cur_len, 
-				      const char *format, ...)
+static inline int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
 { return 0; }
+
+static inline int kobject_action_type(const char *buf, size_t count,
+			enum kobject_action *type)
+{ return -EINVAL; }
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/ktime.h b/include/linux/ktime.h
index dae7143644f..a6ddec141f9 100644
--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -102,6 +102,13 @@ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
 #define ktime_add_ns(kt, nsval) \
 		({ (ktime_t){ .tv64 = (kt).tv64 + (nsval) }; })
 
+/*
+ * Subtract a scalar nanosecod from a ktime_t variable
+ * res = kt - nsval:
+ */
+#define ktime_sub_ns(kt, nsval) \
+		({ (ktime_t){ .tv64 = (kt).tv64 - (nsval) }; })
+
 /* convert a timespec to ktime_t format: */
 static inline ktime_t timespec_to_ktime(struct timespec ts)
 {
@@ -200,6 +207,15 @@ static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2)
 extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec);
 
 /**
+ * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
+ * @kt:		minuend
+ * @nsec:	the scalar nsec value to subtract
+ *
+ * Returns the subtraction of @nsec from @kt in ktime_t format
+ */
+extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec);
+
+/**
  * timespec_to_ktime - convert a timespec to ktime_t format
  * @ts:		the timespec variable to convert
  *
@@ -289,6 +305,11 @@ static inline ktime_t ktime_add_us(const ktime_t kt, const u64 usec)
 	return ktime_add_ns(kt, usec * 1000);
 }
 
+static inline ktime_t ktime_sub_us(const ktime_t kt, const u64 usec)
+{
+	return ktime_sub_ns(kt, usec * 1000);
+}
+
 /*
  * The resolution of the clocks. The resolution value is returned in
  * the clock_getres() system call to give application programmers an
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a67bb9075e9..229a9ff9f92 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -28,7 +28,6 @@
 
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <asm/scatterlist.h>
 #include <linux/io.h>
@@ -107,12 +106,6 @@ static inline u32 ata_msg_init(int dval, int default_msg_enable_bits)
 /* defines only for the constants which don't work well as enums */
 #define ATA_TAG_POISON		0xfafbfcfdU
 
-/* move to PCI layer? */
-static inline struct device *pci_dev_to_dev(struct pci_dev *pdev)
-{
-	return &pdev->dev;
-}
-
 enum {
 	/* various global constants */
 	LIBATA_MAX_PRD		= ATA_MAX_PRD / 2,
@@ -139,11 +132,12 @@ enum {
 	ATA_DFLAG_FLUSH_EXT	= (1 << 4), /* do FLUSH_EXT instead of FLUSH */
 	ATA_DFLAG_ACPI_PENDING	= (1 << 5), /* ACPI resume action pending */
 	ATA_DFLAG_ACPI_FAILED	= (1 << 6), /* ACPI on devcfg has failed */
-	ATA_DFLAG_CFG_MASK	= (1 << 8) - 1,
+	ATA_DFLAG_AN		= (1 << 7), /* AN configured */
+	ATA_DFLAG_CFG_MASK	= (1 << 12) - 1,
 
-	ATA_DFLAG_PIO		= (1 << 8), /* device limited to PIO mode */
-	ATA_DFLAG_NCQ_OFF	= (1 << 9), /* device limited to non-NCQ mode */
-	ATA_DFLAG_SPUNDOWN	= (1 << 10), /* XXX: for spindown_compat */
+	ATA_DFLAG_PIO		= (1 << 12), /* device limited to PIO mode */
+	ATA_DFLAG_NCQ_OFF	= (1 << 13), /* device limited to non-NCQ mode */
+	ATA_DFLAG_SPUNDOWN	= (1 << 14), /* XXX: for spindown_compat */
 	ATA_DFLAG_INIT_MASK	= (1 << 16) - 1,
 
 	ATA_DFLAG_DETACH	= (1 << 16),
@@ -154,7 +148,22 @@ enum {
 	ATA_DEV_ATA_UNSUP	= 2,	/* ATA device (unsupported) */
 	ATA_DEV_ATAPI		= 3,	/* ATAPI device */
 	ATA_DEV_ATAPI_UNSUP	= 4,	/* ATAPI device (unsupported) */
-	ATA_DEV_NONE		= 5,	/* no device */
+	ATA_DEV_PMP		= 5,	/* SATA port multiplier */
+	ATA_DEV_PMP_UNSUP	= 6,	/* SATA port multiplier (unsupported) */
+	ATA_DEV_SEMB		= 7,	/* SEMB */
+	ATA_DEV_SEMB_UNSUP	= 8,	/* SEMB (unsupported) */
+	ATA_DEV_NONE		= 9,	/* no device */
+
+	/* struct ata_link flags */
+	ATA_LFLAG_HRST_TO_RESUME = (1 << 0), /* hardreset to resume link */
+	ATA_LFLAG_SKIP_D2H_BSY	= (1 << 1), /* can't wait for the first D2H
+					     * Register FIS clearing BSY */
+	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
+	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
+	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
+	ATA_LFLAG_ASSUME_CLASS	= ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB,
+	ATA_LFLAG_NO_RETRY	= (1 << 5), /* don't retry this link */
+	ATA_LFLAG_DISABLED	= (1 << 6), /* link is disabled */
 
 	/* struct ata_port flags */
 	ATA_FLAG_SLAVE_POSS	= (1 << 0), /* host supports slave dev */
@@ -170,13 +179,12 @@ enum {
 	ATA_FLAG_PIO_POLLING	= (1 << 9), /* use polling PIO if LLD
 					     * doesn't handle PIO interrupts */
 	ATA_FLAG_NCQ		= (1 << 10), /* host supports NCQ */
-	ATA_FLAG_HRST_TO_RESUME	= (1 << 11), /* hardreset to resume phy */
-	ATA_FLAG_SKIP_D2H_BSY	= (1 << 12), /* can't wait for the first D2H
-					      * Register FIS clearing BSY */
 	ATA_FLAG_DEBUGMSG	= (1 << 13),
 	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
 	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
 	ATA_FLAG_ACPI_SATA	= (1 << 17), /* need native SATA ACPI layout */
+	ATA_FLAG_AN		= (1 << 18), /* controller supports AN */
+	ATA_FLAG_PMP		= (1 << 19), /* controller supports PMP */
 
 	/* The following flag belongs to ap->pflags but is kept in
 	 * ap->flags because it's referenced in many LLDs and will be
@@ -195,6 +203,7 @@ enum {
 	ATA_PFLAG_UNLOADING	= (1 << 5), /* module is unloading */
 	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
 	ATA_PFLAG_INITIALIZING	= (1 << 7), /* being initialized, don't touch */
+	ATA_PFLAG_RESETTING	= (1 << 8), /* reset in progress */
 
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
@@ -207,6 +216,7 @@ enum {
 	ATA_QCFLAG_DMAMAP	= ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
 	ATA_QCFLAG_IO		= (1 << 3), /* standard IO command */
 	ATA_QCFLAG_RESULT_TF	= (1 << 4), /* result TF requested */
+	ATA_QCFLAG_CLEAR_EXCL	= (1 << 5), /* clear excl_link on completion */
 
 	ATA_QCFLAG_FAILED	= (1 << 16), /* cmd failed and is owned by EH */
 	ATA_QCFLAG_SENSE_VALID	= (1 << 17), /* sense data valid */
@@ -263,6 +273,10 @@ enum {
 	/* ering size */
 	ATA_ERING_SIZE		= 32,
 
+	/* return values for ->qc_defer */
+	ATA_DEFER_LINK		= 1,
+	ATA_DEFER_PORT		= 2,
+
 	/* desc_len for ata_eh_info and context */
 	ATA_EH_DESC_LEN		= 80,
 
@@ -270,6 +284,7 @@ enum {
 	ATA_EH_REVALIDATE	= (1 << 0),
 	ATA_EH_SOFTRESET	= (1 << 1),
 	ATA_EH_HARDRESET	= (1 << 2),
+	ATA_EH_ENABLE_LINK	= (1 << 3),
 
 	ATA_EH_RESET_MASK	= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
 	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE,
@@ -289,12 +304,16 @@ enum {
 	ATA_EHI_DID_RESET	= ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
 	ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
 
-	/* max repeat if error condition is still set after ->error_handler */
-	ATA_EH_MAX_REPEAT	= 5,
+	/* max tries if error condition is still set after ->error_handler */
+	ATA_EH_MAX_TRIES	= 5,
 
 	/* how hard are we gonna try to probe/recover devices */
 	ATA_PROBE_MAX_TRIES	= 3,
 	ATA_EH_DEV_TRIES	= 3,
+	ATA_EH_PMP_TRIES	= 5,
+	ATA_EH_PMP_LINK_TRIES	= 3,
+
+	SATA_PMP_SCR_TIMEOUT	= 250,
 
 	/* Horkage types. May be set by libata or controller on drives
 	   (some horkage may be drive/controller pair dependant */
@@ -304,6 +323,14 @@ enum {
 	ATA_HORKAGE_NONCQ	= (1 << 2),	/* Don't use NCQ */
 	ATA_HORKAGE_MAX_SEC_128	= (1 << 3),	/* Limit max sects to 128 */
 	ATA_HORKAGE_BROKEN_HPA	= (1 << 4),	/* Broken HPA */
+	ATA_HORKAGE_SKIP_PM	= (1 << 5),	/* Skip PM operations */
+	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
+
+	 /* DMA mask for user DMA control: User visible values; DO NOT 
+	    renumber */
+	ATA_DMA_MASK_ATA	= (1 << 0),	/* DMA on ATA Disk */
+	ATA_DMA_MASK_ATAPI	= (1 << 1),	/* DMA on ATAPI */
+	ATA_DMA_MASK_CFA	= (1 << 2),	/* DMA on CF Card */
 };
 
 enum hsm_task_states {
@@ -333,14 +360,15 @@ enum ata_completion_errors {
 struct scsi_device;
 struct ata_port_operations;
 struct ata_port;
+struct ata_link;
 struct ata_queued_cmd;
 
 /* typedefs */
 typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
-typedef int (*ata_prereset_fn_t)(struct ata_port *ap, unsigned long deadline);
-typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes,
+typedef int (*ata_prereset_fn_t)(struct ata_link *link, unsigned long deadline);
+typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
 			      unsigned long deadline);
-typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes);
+typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);
 
 struct ata_ioports {
 	void __iomem		*cmd_addr;
@@ -363,8 +391,6 @@ struct ata_ioports {
 struct ata_host {
 	spinlock_t		lock;
 	struct device 		*dev;
-	unsigned long		irq;
-	unsigned long		irq2;
 	void __iomem * const	*iomap;
 	unsigned int		n_ports;
 	void			*private_data;
@@ -436,7 +462,7 @@ struct ata_ering {
 };
 
 struct ata_device {
-	struct ata_port		*ap;
+	struct ata_link		*link;
 	unsigned int		devno;		/* 0 or 1 */
 	unsigned long		flags;		/* ATA_DFLAG_xxx */
 	unsigned int		horkage;	/* List of broken features */
@@ -447,7 +473,12 @@ struct ata_device {
 	/* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
 	u64			n_sectors;	/* size of device, if ATA */
 	unsigned int		class;		/* ATA_DEV_xxx */
-	u16			id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
+
+	union {
+		u16		id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
+		u32		gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
+	};
+
 	u8			pio_mode;
 	u8			dma_mode;
 	u8			xfer_mode;
@@ -510,6 +541,27 @@ struct ata_acpi_gtm {
 	u32 flags;
 } __packed;
 
+struct ata_link {
+	struct ata_port		*ap;
+	int			pmp;		/* port multiplier port # */
+
+	unsigned int		active_tag;	/* active tag on this link */
+	u32			sactive;	/* active NCQ commands */
+
+	unsigned int		flags;		/* ATA_LFLAG_xxx */
+
+	unsigned int		hw_sata_spd_limit;
+	unsigned int		sata_spd_limit;
+	unsigned int		sata_spd;	/* current SATA PHY speed */
+
+	/* record runtime error info, protected by host_set lock */
+	struct ata_eh_info	eh_info;
+	/* EH context */
+	struct ata_eh_context	eh_context;
+
+	struct ata_device	device[ATA_MAX_DEVICES];
+};
+
 struct ata_port {
 	struct Scsi_Host	*scsi_host; /* our co-allocated scsi host */
 	const struct ata_port_operations *ops;
@@ -533,23 +585,17 @@ struct ata_port {
 	unsigned int		mwdma_mask;
 	unsigned int		udma_mask;
 	unsigned int		cbl;	/* cable type; ATA_CBL_xxx */
-	unsigned int		hw_sata_spd_limit;
-	unsigned int		sata_spd_limit;	/* SATA PHY speed limit */
-	unsigned int		sata_spd;	/* current SATA PHY speed */
-
-	/* record runtime error info, protected by host lock */
-	struct ata_eh_info	eh_info;
-	/* EH context owned by EH */
-	struct ata_eh_context	eh_context;
-
-	struct ata_device	device[ATA_MAX_DEVICES];
 
 	struct ata_queued_cmd	qcmd[ATA_MAX_QUEUE];
 	unsigned long		qc_allocated;
 	unsigned int		qc_active;
+	int			nr_active_links; /* #links with active qcs */
+
+	struct ata_link		link;	/* host default link */
 
-	unsigned int		active_tag;
-	u32			sactive;
+	int			nr_pmp_links;	/* nr of available PMP links */
+	struct ata_link		*pmp_link;	/* array of PMP links */
+	struct ata_link		*excl_link;	/* for PMP qc exclusion */
 
 	struct ata_port_stats	stats;
 	struct ata_host		*host;
@@ -565,6 +611,7 @@ struct ata_port {
 	u32			msg_enable;
 	struct list_head	eh_done_q;
 	wait_queue_head_t	eh_wait_q;
+	int			eh_tries;
 
 	pm_message_t		pm_mesg;
 	int			*pm_result;
@@ -582,8 +629,6 @@ struct ata_port {
 };
 
 struct ata_port_operations {
-	void (*port_disable) (struct ata_port *);
-
 	void (*dev_config) (struct ata_device *);
 
 	void (*set_piomode) (struct ata_port *, struct ata_device *);
@@ -599,7 +644,7 @@ struct ata_port_operations {
 	void (*dev_select)(struct ata_port *ap, unsigned int device);
 
 	void (*phy_reset) (struct ata_port *ap); /* obsolete */
-	int  (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev);
+	int  (*set_mode) (struct ata_link *link, struct ata_device **r_failed_dev);
 
 	int (*cable_detect) (struct ata_port *ap);
 
@@ -610,9 +655,14 @@ struct ata_port_operations {
 
 	void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
 
+	int (*qc_defer) (struct ata_queued_cmd *qc);
 	void (*qc_prep) (struct ata_queued_cmd *qc);
 	unsigned int (*qc_issue) (struct ata_queued_cmd *qc);
 
+	/* port multiplier */
+	void (*pmp_attach) (struct ata_port *ap);
+	void (*pmp_detach) (struct ata_port *ap);
+
 	/* Error handlers.  ->error_handler overrides ->eng_timeout and
 	 * indicates that new-style EH is in place.
 	 */
@@ -626,7 +676,6 @@ struct ata_port_operations {
 	irq_handler_t irq_handler;
 	void (*irq_clear) (struct ata_port *);
 	u8 (*irq_on) (struct ata_port *);
-	u8 (*irq_ack) (struct ata_port *ap, unsigned int chk_drq);
 
 	int (*scr_read) (struct ata_port *ap, unsigned int sc_reg, u32 *val);
 	int (*scr_write) (struct ata_port *ap, unsigned int sc_reg, u32 val);
@@ -646,6 +695,7 @@ struct ata_port_operations {
 struct ata_port_info {
 	struct scsi_host_template	*sht;
 	unsigned long		flags;
+	unsigned long		link_flags;
 	unsigned long		pio_mask;
 	unsigned long		mwdma_mask;
 	unsigned long		udma_mask;
@@ -689,38 +739,27 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
 	return ap->ops == &ata_dummy_port_ops;
 }
 
-extern void sata_print_link_status(struct ata_port *ap);
+extern void sata_print_link_status(struct ata_link *link);
 extern void ata_port_probe(struct ata_port *);
 extern void __sata_phy_reset(struct ata_port *ap);
 extern void sata_phy_reset(struct ata_port *ap);
 extern void ata_bus_reset(struct ata_port *ap);
-extern int sata_set_spd(struct ata_port *ap);
-extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param,
-			     unsigned long deadline);
-extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param,
-			   unsigned long deadline);
-extern int ata_std_prereset(struct ata_port *ap, unsigned long deadline);
-extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes,
+extern int sata_set_spd(struct ata_link *link);
+extern int sata_link_debounce(struct ata_link *link,
+			const unsigned long *params, unsigned long deadline);
+extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
+			    unsigned long deadline);
+extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
+extern int ata_std_softreset(struct ata_link *link, unsigned int *classes,
 			     unsigned long deadline);
-extern int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing,
-			       unsigned long deadline);
-extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class,
+extern int sata_link_hardreset(struct ata_link *link,
+			const unsigned long *timing, unsigned long deadline);
+extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
 			      unsigned long deadline);
-extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
+extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
 extern void ata_port_disable(struct ata_port *);
 extern void ata_std_ports(struct ata_ioports *ioaddr);
-#ifdef CONFIG_PCI
-extern int ata_pci_init_one (struct pci_dev *pdev,
-			     const struct ata_port_info * const * ppi);
-extern void ata_pci_remove_one (struct pci_dev *pdev);
-#ifdef CONFIG_PM
-extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
-extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern int ata_pci_device_resume(struct pci_dev *pdev);
-#endif
-extern int ata_pci_clear_simplex(struct pci_dev *pdev);
-#endif /* CONFIG_PCI */
+
 extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
 extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 			const struct ata_port_info * const * ppi, int n_ports);
@@ -746,12 +785,12 @@ extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
 extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
 			    struct ata_port *ap);
 extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
-extern int sata_scr_valid(struct ata_port *ap);
-extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val);
-extern int sata_scr_write(struct ata_port *ap, int reg, u32 val);
-extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val);
-extern int ata_port_online(struct ata_port *ap);
-extern int ata_port_offline(struct ata_port *ap);
+extern int sata_scr_valid(struct ata_link *link);
+extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
+extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
+extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
+extern int ata_link_online(struct ata_link *link);
+extern int ata_link_offline(struct ata_link *link);
 #ifdef CONFIG_PM
 extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
 extern void ata_host_resume(struct ata_host *host);
@@ -765,7 +804,8 @@ extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
 extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
 			     unsigned long interval_msec,
 			     unsigned long timeout_msec);
-extern unsigned int ata_dev_try_classify(struct ata_port *, unsigned int, u8 *);
+extern unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
+					 u8 *r_err);
 
 /*
  * Default driver ops implementations
@@ -787,6 +827,7 @@ extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf,
 			  unsigned int buflen, int write_data);
 extern void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
 				unsigned int buflen, int write_data);
+extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
 extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
@@ -830,11 +871,8 @@ extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
 				       int queue_depth);
 extern struct ata_device *ata_dev_pair(struct ata_device *adev);
-extern int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
+extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
 extern u8 ata_irq_on(struct ata_port *ap);
-extern u8 ata_dummy_irq_on(struct ata_port *ap);
-extern u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq);
-extern u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq);
 
 extern int ata_cable_40wire(struct ata_port *ap);
 extern int ata_cable_80wire(struct ata_port *ap);
@@ -869,8 +907,29 @@ enum {
 				  ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
 };
 
+/* libata-acpi.c */
+#ifdef CONFIG_ATA_ACPI
+extern int ata_acpi_cbl_80wire(struct ata_port *ap);
+int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
+int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
+#else
+static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
+#endif
 
 #ifdef CONFIG_PCI
+struct pci_dev;
+
+extern int ata_pci_init_one (struct pci_dev *pdev,
+			     const struct ata_port_info * const * ppi);
+extern void ata_pci_remove_one (struct pci_dev *pdev);
+#ifdef CONFIG_PM
+extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
+extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
+extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+extern int ata_pci_device_resume(struct pci_dev *pdev);
+#endif
+extern int ata_pci_clear_simplex(struct pci_dev *pdev);
+
 struct pci_bits {
 	unsigned int		reg;	/* PCI config register to read */
 	unsigned int		width;	/* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
@@ -888,13 +947,29 @@ extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
 #endif /* CONFIG_PCI */
 
 /*
+ * PMP
+ */
+extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
+extern int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline);
+extern int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
+				  unsigned long deadline);
+extern void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class);
+extern void sata_pmp_do_eh(struct ata_port *ap,
+		ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
+		ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
+		ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
+		ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset);
+
+/*
  * EH
  */
 extern void ata_eng_timeout(struct ata_port *ap);
 
 extern void ata_port_schedule_eh(struct ata_port *ap);
+extern int ata_link_abort(struct ata_link *link);
 extern int ata_port_abort(struct ata_port *ap);
 extern int ata_port_freeze(struct ata_port *ap);
+extern int sata_async_notification(struct ata_port *ap);
 
 extern void ata_eh_freeze_port(struct ata_port *ap);
 extern void ata_eh_thaw_port(struct ata_port *ap);
@@ -912,14 +987,25 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 #define ata_port_printk(ap, lv, fmt, args...) \
 	printk(lv"ata%u: "fmt, (ap)->print_id , ##args)
 
+#define ata_link_printk(link, lv, fmt, args...) do { \
+	if ((link)->ap->nr_pmp_links) \
+		printk(lv"ata%u.%02u: "fmt, (link)->ap->print_id, \
+		       (link)->pmp , ##args); \
+	else \
+		printk(lv"ata%u: "fmt, (link)->ap->print_id , ##args); \
+	} while(0)
+
 #define ata_dev_printk(dev, lv, fmt, args...) \
-	printk(lv"ata%u.%02u: "fmt, (dev)->ap->print_id, (dev)->devno , ##args)
+	printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->print_id, \
+	       (dev)->link->pmp + (dev)->devno , ##args)
 
 /*
  * ata_eh_info helpers
  */
-extern void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
-extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
+extern void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
 extern void ata_ehi_clear_desc(struct ata_eh_info *ehi);
 
 static inline void ata_ehi_schedule_probe(struct ata_eh_info *ehi)
@@ -933,10 +1019,21 @@ static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
 {
 	ata_ehi_schedule_probe(ehi);
 	ehi->flags |= ATA_EHI_HOTPLUGGED;
+	ehi->action |= ATA_EH_ENABLE_LINK;
 	ehi->err_mask |= AC_ERR_ATA_BUS;
 }
 
 /*
+ * port description helpers
+ */
+extern void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+#ifdef CONFIG_PCI
+extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
+			       const char *name);
+#endif
+
+/*
  * qc helpers
  */
 static inline int
@@ -991,12 +1088,14 @@ static inline unsigned int ata_tag_internal(unsigned int tag)
  */
 static inline unsigned int ata_class_enabled(unsigned int class)
 {
-	return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI;
+	return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI ||
+		class == ATA_DEV_PMP || class == ATA_DEV_SEMB;
 }
 
 static inline unsigned int ata_class_disabled(unsigned int class)
 {
-	return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP;
+	return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP ||
+		class == ATA_DEV_PMP_UNSUP || class == ATA_DEV_SEMB_UNSUP;
 }
 
 static inline unsigned int ata_class_absent(unsigned int class)
@@ -1020,15 +1119,62 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev)
 }
 
 /*
- * port helpers
+ * link helpers
  */
-static inline int ata_port_max_devices(const struct ata_port *ap)
+static inline int ata_is_host_link(const struct ata_link *link)
+{
+	return link == &link->ap->link;
+}
+
+static inline int ata_link_max_devices(const struct ata_link *link)
 {
-	if (ap->flags & ATA_FLAG_SLAVE_POSS)
+	if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS)
 		return 2;
 	return 1;
 }
 
+static inline int ata_link_active(struct ata_link *link)
+{
+	return ata_tag_valid(link->active_tag) || link->sactive;
+}
+
+static inline struct ata_link *ata_port_first_link(struct ata_port *ap)
+{
+	if (ap->nr_pmp_links)
+		return ap->pmp_link;
+	return &ap->link;
+}
+
+static inline struct ata_link *ata_port_next_link(struct ata_link *link)
+{
+	struct ata_port *ap = link->ap;
+
+	if (link == &ap->link) {
+		if (!ap->nr_pmp_links)
+			return NULL;
+		return ap->pmp_link;
+	}
+
+	if (++link - ap->pmp_link < ap->nr_pmp_links)
+		return link;
+	return NULL;
+}
+
+#define __ata_port_for_each_link(lk, ap) \
+	for ((lk) = &(ap)->link; (lk); (lk) = ata_port_next_link(lk))
+
+#define ata_port_for_each_link(link, ap) \
+	for ((link) = ata_port_first_link(ap); (link); \
+	     (link) = ata_port_next_link(link))
+
+#define ata_link_for_each_dev(dev, link) \
+	for ((dev) = (link)->device; \
+	     (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \
+	     (dev)++)
+
+#define ata_link_for_each_dev_reverse(dev, link) \
+	for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \
+	     (dev) >= (link)->device || ((dev) = NULL); (dev)--)
 
 static inline u8 ata_chk_status(struct ata_port *ap)
 {
@@ -1110,9 +1256,11 @@ static inline u8 ata_wait_idle(struct ata_port *ap)
 {
 	u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
 
+#ifdef ATA_DEBUG
 	if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
-		DPRINTK("ATA: abnormal status 0x%X on port 0x%p\n",
-			status, ap->ioaddr.status_addr);
+		ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
+				status);
+#endif
 
 	return status;
 }
@@ -1149,7 +1297,7 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
 {
 	memset(tf, 0, sizeof(*tf));
 
-	tf->ctl = dev->ap->ctl;
+	tf->ctl = dev->link->ap->ctl;
 	if (dev->devno == 0)
 		tf->device = ATA_DEVICE_OBS;
 	else
diff --git a/include/linux/list.h b/include/linux/list.h
index f29fc9c1a96..ad9dcb9e337 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -525,6 +525,20 @@ static inline void list_splice_init_rcu(struct list_head *list,
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
+ * list_for_each_entry_continue_reverse - iterate backwards from the given point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Start to iterate over list of given type backwards, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_reverse(pos, head, member)		\
+	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head);	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
  * list_for_each_entry_from - iterate over list of given type from the current point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
new file mode 100644
index 00000000000..8ea9a42a4c0
--- /dev/null
+++ b/include/linux/mdio-bitbang.h
@@ -0,0 +1,42 @@
+#ifndef __LINUX_MDIO_BITBANG_H
+#define __LINUX_MDIO_BITBANG_H
+
+#include <linux/phy.h>
+#include <linux/module.h>
+
+struct mdiobb_ctrl;
+
+struct mdiobb_ops {
+	struct module *owner;
+
+	/* Set the Management Data Clock high if level is one,
+	 * low if level is zero.
+	 */
+	void (*set_mdc)(struct mdiobb_ctrl *ctrl, int level);
+
+	/* Configure the Management Data I/O pin as an input if
+	 * "output" is zero, or an output if "output" is one.
+	 */
+	void (*set_mdio_dir)(struct mdiobb_ctrl *ctrl, int output);
+
+	/* Set the Management Data I/O pin high if value is one,
+	 * low if "value" is zero.  This may only be called
+	 * when the MDIO pin is configured as an output.
+	 */
+	void (*set_mdio_data)(struct mdiobb_ctrl *ctrl, int value);
+
+	/* Retrieve the state Management Data I/O pin. */
+	int (*get_mdio_data)(struct mdiobb_ctrl *ctrl);
+};
+
+struct mdiobb_ctrl {
+	const struct mdiobb_ops *ops;
+};
+
+/* The returned bus is not yet registered with the phy layer. */
+struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl);
+
+/* The bus must already have been unregistered. */
+void free_mdio_bitbang(struct mii_bus *bus);
+
+#endif
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index cfb78fb2c04..222815d91c4 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -49,6 +49,10 @@ enum {
 };
 
 enum {
+	MLX4_BOARD_ID_LEN = 64
+};
+
+enum {
 	MLX4_DEV_CAP_FLAG_RC		= 1 <<  0,
 	MLX4_DEV_CAP_FLAG_UC		= 1 <<  1,
 	MLX4_DEV_CAP_FLAG_UD		= 1 <<  2,
@@ -210,6 +214,17 @@ struct mlx4_mr {
 	int			enabled;
 };
 
+struct mlx4_fmr {
+	struct mlx4_mr		mr;
+	struct mlx4_mpt_entry  *mpt;
+	__be64		       *mtts;
+	dma_addr_t		dma_handle;
+	int			max_pages;
+	int			max_maps;
+	int			maps;
+	u8			page_shift;
+};
+
 struct mlx4_uar {
 	unsigned long		pfn;
 	int			index;
@@ -272,6 +287,8 @@ struct mlx4_dev {
 	unsigned long		flags;
 	struct mlx4_caps	caps;
 	struct radix_tree_root	qp_table_tree;
+	u32			rev_id;
+	char			board_id[MLX4_BOARD_ID_LEN];
 };
 
 struct mlx4_init_port_param {
@@ -331,4 +348,14 @@ int mlx4_CLOSE_PORT(struct mlx4_dev *dev, int port);
 int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]);
 int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]);
 
+int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list,
+		      int npages, u64 iova, u32 *lkey, u32 *rkey);
+int mlx4_fmr_alloc(struct mlx4_dev *dev, u32 pd, u32 access, int max_pages,
+		   int max_maps, u8 page_shift, struct mlx4_fmr *fmr);
+int mlx4_fmr_enable(struct mlx4_dev *dev, struct mlx4_fmr *fmr);
+void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr,
+		    u32 *lkey, u32 *rkey);
+int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr);
+int mlx4_SYNC_TPT(struct mlx4_dev *dev);
+
 #endif /* MLX4_DEVICE_H */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index badf702fcff..0d508ac17d6 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -55,7 +55,28 @@ struct sd_switch_caps {
 	unsigned int		hs_max_dtr;
 };
 
+struct sdio_cccr {
+	unsigned int		sdio_vsn;
+	unsigned int		sd_vsn;
+	unsigned int		multi_block:1,
+				low_speed:1,
+				wide_bus:1,
+				high_power:1,
+				high_speed:1;
+};
+
+struct sdio_cis {
+	unsigned short		vendor;
+	unsigned short		device;
+	unsigned short		blksize;
+	unsigned int		max_dtr;
+};
+
 struct mmc_host;
+struct sdio_func;
+struct sdio_func_tuple;
+
+#define SDIO_MAX_FUNCS		7
 
 /*
  * MMC device
@@ -67,11 +88,13 @@ struct mmc_card {
 	unsigned int		type;		/* card type */
 #define MMC_TYPE_MMC		0		/* MMC card */
 #define MMC_TYPE_SD		1		/* SD card */
+#define MMC_TYPE_SDIO		2		/* SDIO card */
 	unsigned int		state;		/* (our) card state */
 #define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
 #define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
 #define MMC_STATE_HIGHSPEED	(1<<2)		/* card is in high speed mode */
 #define MMC_STATE_BLOCKADDR	(1<<3)		/* card uses block-addressing */
+
 	u32			raw_cid[4];	/* raw card CID */
 	u32			raw_csd[4];	/* raw card CSD */
 	u32			raw_scr[2];	/* raw card SCR */
@@ -80,10 +103,19 @@ struct mmc_card {
 	struct mmc_ext_csd	ext_csd;	/* mmc v4 extended card specific */
 	struct sd_scr		scr;		/* extra SD information */
 	struct sd_switch_caps	sw_caps;	/* switch (CMD6) caps */
+
+	unsigned int		sdio_funcs;	/* number of SDIO functions */
+	struct sdio_cccr	cccr;		/* common card info */
+	struct sdio_cis		cis;		/* common tuple info */
+	struct sdio_func	*sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
 };
 
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
 #define mmc_card_sd(c)		((c)->type == MMC_TYPE_SD)
+#define mmc_card_sdio(c)	((c)->type == MMC_TYPE_SDIO)
 
 #define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
 #define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 63a80ea6112..d0c3abed74c 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -25,14 +25,20 @@ struct mmc_command {
 #define MMC_RSP_CRC	(1 << 2)		/* expect valid crc */
 #define MMC_RSP_BUSY	(1 << 3)		/* card may send busy */
 #define MMC_RSP_OPCODE	(1 << 4)		/* response contains opcode */
-#define MMC_CMD_MASK	(3 << 5)		/* command type */
+
+#define MMC_CMD_MASK	(3 << 5)		/* non-SPI command type */
 #define MMC_CMD_AC	(0 << 5)
 #define MMC_CMD_ADTC	(1 << 5)
 #define MMC_CMD_BC	(2 << 5)
 #define MMC_CMD_BCR	(3 << 5)
 
+#define MMC_RSP_SPI_S1	(1 << 7)		/* one status byte */
+#define MMC_RSP_SPI_S2	(1 << 8)		/* second byte */
+#define MMC_RSP_SPI_B4	(1 << 9)		/* four data bytes */
+#define MMC_RSP_SPI_BUSY (1 << 10)		/* card may send busy */
+
 /*
- * These are the response types, and correspond to valid bit
+ * These are the native response types, and correspond to valid bit
  * patterns of the above flags.  One additional valid pattern
  * is all zeros, which means we don't expect a response.
  */
@@ -41,12 +47,30 @@ struct mmc_command {
 #define MMC_RSP_R1B	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
 #define MMC_RSP_R2	(MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
 #define MMC_RSP_R3	(MMC_RSP_PRESENT)
+#define MMC_RSP_R4	(MMC_RSP_PRESENT)
+#define MMC_RSP_R5	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 #define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 #define MMC_RSP_R7	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 
 #define mmc_resp_type(cmd)	((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
 
 /*
+ * These are the SPI response types for MMC, SD, and SDIO cards.
+ * Commands return R1, with maybe more info.  Zero is an error type;
+ * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
+ */
+#define MMC_RSP_SPI_R1	(MMC_RSP_SPI_S1)
+#define MMC_RSP_SPI_R1B	(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
+#define MMC_RSP_SPI_R2	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R3	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R4	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R5	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R7	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+
+#define mmc_spi_resp_type(cmd)	((cmd)->flags & \
+		(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
+
+/*
  * These are the command types.
  */
 #define mmc_cmd_type(cmd)	((cmd)->flags & MMC_CMD_MASK)
@@ -54,12 +78,19 @@ struct mmc_command {
 	unsigned int		retries;	/* max number of retries */
 	unsigned int		error;		/* command error */
 
-#define MMC_ERR_NONE	0
-#define MMC_ERR_TIMEOUT	1
-#define MMC_ERR_BADCRC	2
-#define MMC_ERR_FIFO	3
-#define MMC_ERR_FAILED	4
-#define MMC_ERR_INVALID	5
+/*
+ * Standard errno values are used for errors, but some have specific
+ * meaning in the MMC layer:
+ *
+ * ETIMEDOUT    Card took too long to respond
+ * EILSEQ       Basic format problem with the received or sent data
+ *              (e.g. CRC check failed, incorrect opcode in response
+ *              or bad end bit)
+ * EINVAL       Request cannot be performed because of restrictions
+ *              in hardware and/or the driver
+ * ENOMEDIUM    Host can determine that the slot is empty and is
+ *              actively failing requests
+ */
 
 	struct mmc_data		*data;		/* data segment associated with cmd */
 	struct mmc_request	*mrq;		/* associated request */
@@ -76,7 +107,6 @@ struct mmc_data {
 #define MMC_DATA_WRITE	(1 << 8)
 #define MMC_DATA_READ	(1 << 9)
 #define MMC_DATA_STREAM	(1 << 10)
-#define MMC_DATA_MULTI	(1 << 11)
 
 	unsigned int		bytes_xfered;
 
@@ -104,9 +134,20 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
 extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 	struct mmc_command *, int);
 
-extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int);
+extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
 
-extern void mmc_claim_host(struct mmc_host *host);
+extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
 extern void mmc_release_host(struct mmc_host *host);
 
+/**
+ *	mmc_claim_host - exclusively claim a host
+ *	@host: mmc host to claim
+ *
+ *	Claim a host for a set of operations.
+ */
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+	__mmc_claim_host(host, NULL);
+}
+
 #endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index b1350dfd3e9..125eee1407f 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -10,6 +10,8 @@
 #ifndef LINUX_MMC_HOST_H
 #define LINUX_MMC_HOST_H
 
+#include <linux/leds.h>
+
 #include <linux/mmc/core.h>
 
 struct mmc_ios {
@@ -51,6 +53,7 @@ struct mmc_host_ops {
 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
 	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
 	int	(*get_ro)(struct mmc_host *host);
+	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
 };
 
 struct mmc_card;
@@ -87,9 +90,10 @@ struct mmc_host {
 
 #define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
 #define MMC_CAP_MULTIWRITE	(1 << 1)	/* Can accurately report bytes sent to card on error */
-#define MMC_CAP_BYTEBLOCK	(1 << 2)	/* Can do non-log2 block sizes */
-#define MMC_CAP_MMC_HIGHSPEED	(1 << 3)	/* Can do MMC high-speed timing */
-#define MMC_CAP_SD_HIGHSPEED	(1 << 4)	/* Can do SD high-speed timing */
+#define MMC_CAP_MMC_HIGHSPEED	(1 << 2)	/* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED	(1 << 3)	/* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ	(1 << 4)	/* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI		(1 << 5)	/* Talks only SPI protocols */
 
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
@@ -106,6 +110,14 @@ struct mmc_host {
 	struct mmc_ios		ios;		/* current io bus settings */
 	u32			ocr;		/* the current OCR setting */
 
+	/* group bitfields together to minimize padding */
+	unsigned int		use_spi_crc:1;
+	unsigned int		claimed:1;	/* host exclusively claimed */
+	unsigned int		bus_dead:1;	/* bus has been released */
+#ifdef CONFIG_MMC_DEBUG
+	unsigned int		removed:1;	/* host is being removed */
+#endif
+
 	unsigned int		mode;		/* current card mode of host */
 #define MMC_MODE_MMC		0
 #define MMC_MODE_SD		1
@@ -113,16 +125,19 @@ struct mmc_host {
 	struct mmc_card		*card;		/* device attached to this host */
 
 	wait_queue_head_t	wq;
-	unsigned int		claimed:1;	/* host exclusively claimed */
 
 	struct delayed_work	detect;
-#ifdef CONFIG_MMC_DEBUG
-	unsigned int		removed:1;	/* host is being removed */
-#endif
 
 	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
 	unsigned int		bus_refs;	/* reference counter */
-	unsigned int		bus_dead:1;	/* bus has been released */
+
+	unsigned int		sdio_irqs;
+	struct task_struct	*sdio_irq_thread;
+	atomic_t		sdio_irq_thread_abort;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+	struct led_trigger	*led;		/* activity led */
+#endif
 
 	unsigned long		private[0] ____cacheline_aligned;
 };
@@ -137,6 +152,8 @@ static inline void *mmc_priv(struct mmc_host *host)
 	return (void *)host->private;
 }
 
+#define mmc_host_is_spi(host)	((host)->caps & MMC_CAP_SPI)
+
 #define mmc_dev(x)	((x)->parent)
 #define mmc_classdev(x)	(&(x)->class_dev)
 #define mmc_hostname(x)	((x)->class_dev.bus_id)
@@ -147,5 +164,11 @@ extern int mmc_resume_host(struct mmc_host *);
 extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
 extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
 
+static inline void mmc_signal_sdio_irq(struct mmc_host *host)
+{
+	host->ops->enable_sdio_irq(host, 0);
+	wake_up_process(host->sdio_irq_thread);
+}
+
 #endif
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index e3ed9b95040..4236fbf0b6f 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -27,7 +27,7 @@
 
 /* Standard MMC commands (4.1)           type  argument     response */
    /* class 1 */
-#define	MMC_GO_IDLE_STATE         0   /* bc                          */
+#define MMC_GO_IDLE_STATE         0   /* bc                          */
 #define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
 #define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
 #define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
@@ -39,8 +39,10 @@
 #define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
 #define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
 #define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
-#define MMC_SEND_STATUS	         13   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
 #define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+#define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
+#define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
 
   /* class 2 */
 #define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
@@ -90,15 +92,15 @@
  */
 
 /*
-  MMC status in R1
+  MMC status in R1, for native mode (SPI bits are different)
   Type
-  	e : error bit
+	e : error bit
 	s : status bit
 	r : detected and set for the actual command response
 	x : detected and set during command execution. the host must poll
             the card by sending status command in order to read these bits.
   Clear condition
-  	a : according to the card state
+	a : according to the card state
 	b : always related to the previous command. Reception of
             a valid command will clear it (with a delay of one command)
 	c : clear by read
@@ -124,10 +126,33 @@
 #define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
 #define R1_ERASE_RESET		(1 << 13)	/* sr, c */
 #define R1_STATUS(x)            (x & 0xFFFFE000)
-#define R1_CURRENT_STATE(x)    	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
+#define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
 #define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
 #define R1_APP_CMD		(1 << 5)	/* sr, c */
 
+/*
+ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
+ * R1 is the low order byte; R2 is the next highest byte, when present.
+ */
+#define R1_SPI_IDLE		(1 << 0)
+#define R1_SPI_ERASE_RESET	(1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND	(1 << 2)
+#define R1_SPI_COM_CRC		(1 << 3)
+#define R1_SPI_ERASE_SEQ	(1 << 4)
+#define R1_SPI_ADDRESS		(1 << 5)
+#define R1_SPI_PARAMETER	(1 << 6)
+/* R1 bit 7 is always zero */
+#define R2_SPI_CARD_LOCKED	(1 << 8)
+#define R2_SPI_WP_ERASE_SKIP	(1 << 9)	/* or lock/unlock fail */
+#define R2_SPI_LOCK_UNLOCK_FAIL	R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR		(1 << 10)
+#define R2_SPI_CC_ERROR		(1 << 11)
+#define R2_SPI_CARD_ECC_ERROR	(1 << 12)
+#define R2_SPI_WP_VIOLATION	(1 << 13)
+#define R2_SPI_ERASE_PARAM	(1 << 14)
+#define R2_SPI_OUT_OF_RANGE	(1 << 15)	/* or CSD overwrite */
+#define R2_SPI_CSD_OVERWRITE	R2_SPI_OUT_OF_RANGE
+
 /* These are unpacked versions of the actual responses */
 
 struct _mmc_csd {
@@ -182,6 +207,7 @@ struct _mmc_csd {
  */
 #define CCC_BASIC		(1<<0)	/* (0) Basic protocol functions */
 					/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+					/* (and for SPI, CMD58,59) */
 #define CCC_STREAM_READ		(1<<1)	/* (1) Stream read commands */
 					/* (CMD11) */
 #define CCC_BLOCK_READ		(1<<2)	/* (2) Block read commands */
@@ -227,6 +253,7 @@ struct _mmc_csd {
 #define EXT_CSD_BUS_WIDTH	183	/* R/W */
 #define EXT_CSD_HS_TIMING	185	/* R/W */
 #define EXT_CSD_CARD_TYPE	196	/* RO */
+#define EXT_CSD_REV		192	/* RO */
 #define EXT_CSD_SEC_CNT		212	/* RO, 4 bytes */
 
 /*
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
new file mode 100644
index 00000000000..47ba464f517
--- /dev/null
+++ b/include/linux/mmc/sdio.h
@@ -0,0 +1,159 @@
+/*
+ *  include/linux/mmc/sdio.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SDIO_H
+#define MMC_SDIO_H
+
+/* SDIO commands                         type  argument     response */
+#define SD_IO_SEND_OP_COND          5 /* bcr  [23:0] OCR         R4  */
+#define SD_IO_RW_DIRECT            52 /* ac   [31:0] See below   R5  */
+#define SD_IO_RW_EXTENDED          53 /* adtc [31:0] See below   R5  */
+
+/*
+ * SD_IO_RW_DIRECT argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] RAW flag
+ *      [25:9] Register address
+ *      [7:0] Data
+ */
+
+/*
+ * SD_IO_RW_EXTENDED argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] Block mode
+ *      [26] Increment address
+ *      [25:9] Register address
+ *      [8:0] Byte/block count
+ */
+
+/*
+  SDIO status in R5
+  Type
+	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R5_COM_CRC_ERROR	(1 << 15)	/* er, b */
+#define R5_ILLEGAL_COMMAND	(1 << 14)	/* er, b */
+#define R5_ERROR		(1 << 11)	/* erx, c */
+#define R5_FUNCTION_NUMBER	(1 << 9)	/* er, c */
+#define R5_OUT_OF_RANGE		(1 << 8)	/* er, c */
+#define R5_STATUS(x)		(x & 0xCB00)
+#define R5_IO_CURRENT_STATE(x)	((x & 0x3000) >> 12) /* s, b */
+
+/*
+ * Card Common Control Registers (CCCR)
+ */
+
+#define SDIO_CCCR_CCCR		0x00
+
+#define  SDIO_CCCR_REV_1_00	0	/* CCCR/FBR Version 1.00 */
+#define  SDIO_CCCR_REV_1_10	1	/* CCCR/FBR Version 1.10 */
+#define  SDIO_CCCR_REV_1_20	2	/* CCCR/FBR Version 1.20 */
+
+#define  SDIO_SDIO_REV_1_00	0	/* SDIO Spec Version 1.00 */
+#define  SDIO_SDIO_REV_1_10	1	/* SDIO Spec Version 1.10 */
+#define  SDIO_SDIO_REV_1_20	2	/* SDIO Spec Version 1.20 */
+#define  SDIO_SDIO_REV_2_00	3	/* SDIO Spec Version 2.00 */
+
+#define SDIO_CCCR_SD		0x01
+
+#define  SDIO_SD_REV_1_01	0	/* SD Physical Spec Version 1.01 */
+#define  SDIO_SD_REV_1_10	1	/* SD Physical Spec Version 1.10 */
+#define  SDIO_SD_REV_2_00	2	/* SD Physical Spec Version 2.00 */
+
+#define SDIO_CCCR_IOEx		0x02
+#define SDIO_CCCR_IORx		0x03
+
+#define SDIO_CCCR_IENx		0x04	/* Function/Master Interrupt Enable */
+#define SDIO_CCCR_INTx		0x05	/* Function Interrupt Pending */
+
+#define SDIO_CCCR_ABORT		0x06	/* function abort/card reset */
+
+#define SDIO_CCCR_IF		0x07	/* bus interface controls */
+
+#define  SDIO_BUS_WIDTH_1BIT	0x00
+#define  SDIO_BUS_WIDTH_4BIT	0x02
+
+#define  SDIO_BUS_CD_DISABLE     0x80	/* disable pull-up on DAT3 (pin 1) */
+
+#define SDIO_CCCR_CAPS		0x08
+
+#define  SDIO_CCCR_CAP_SDC	0x01	/* can do CMD52 while data transfer */
+#define  SDIO_CCCR_CAP_SMB	0x02	/* can do multi-block xfers (CMD53) */
+#define  SDIO_CCCR_CAP_SRW	0x04	/* supports read-wait protocol */
+#define  SDIO_CCCR_CAP_SBS	0x08	/* supports suspend/resume */
+#define  SDIO_CCCR_CAP_S4MI	0x10	/* interrupt during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_E4MI	0x20	/* enable ints during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_LSC	0x40	/* low speed card */
+#define  SDIO_CCCR_CAP_4BLS	0x80	/* 4 bit low speed card */
+
+#define SDIO_CCCR_CIS		0x09	/* common CIS pointer (3 bytes) */
+
+/* Following 4 regs are valid only if SBS is set */
+#define SDIO_CCCR_SUSPEND	0x0c
+#define SDIO_CCCR_SELx		0x0d
+#define SDIO_CCCR_EXECx		0x0e
+#define SDIO_CCCR_READYx	0x0f
+
+#define SDIO_CCCR_BLKSIZE	0x10
+
+#define SDIO_CCCR_POWER		0x12
+
+#define  SDIO_POWER_SMPC	0x01	/* Supports Master Power Control */
+#define  SDIO_POWER_EMPC	0x02	/* Enable Master Power Control */
+
+#define SDIO_CCCR_SPEED		0x13
+
+#define  SDIO_SPEED_SHS		0x01	/* Supports High-Speed mode */
+#define  SDIO_SPEED_EHS		0x02	/* Enable High-Speed mode */
+
+/*
+ * Function Basic Registers (FBR)
+ */
+
+#define SDIO_FBR_BASE(f)	((f) * 0x100) /* base of function f's FBRs */
+
+#define SDIO_FBR_STD_IF		0x00
+
+#define  SDIO_FBR_SUPPORTS_CSA	0x40	/* supports Code Storage Area */
+#define  SDIO_FBR_ENABLE_CSA	0x80	/* enable Code Storage Area */
+
+#define SDIO_FBR_STD_IF_EXT	0x01
+
+#define SDIO_FBR_POWER		0x02
+
+#define  SDIO_FBR_POWER_SPS	0x01	/* Supports Power Selection */
+#define  SDIO_FBR_POWER_EPS	0x02	/* Enable (low) Power Selection */
+
+#define SDIO_FBR_CIS		0x09	/* CIS pointer (3 bytes) */
+
+
+#define SDIO_FBR_CSA		0x0C	/* CSA pointer (3 bytes) */
+
+#define SDIO_FBR_CSA_DATA	0x0F
+
+#define SDIO_FBR_BLKSIZE	0x10	/* block size (2 bytes) */
+
+#endif
+
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
new file mode 100644
index 00000000000..b050f4d7b41
--- /dev/null
+++ b/include/linux/mmc/sdio_func.h
@@ -0,0 +1,153 @@
+/*
+ *  include/linux/mmc/sdio_func.h
+ *
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SDIO_FUNC_H
+#define MMC_SDIO_FUNC_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct mmc_card;
+struct sdio_func;
+
+typedef void (sdio_irq_handler_t)(struct sdio_func *);
+
+/*
+ * SDIO function CIS tuple (unknown to the core)
+ */
+struct sdio_func_tuple {
+	struct sdio_func_tuple *next;
+	unsigned char code;
+	unsigned char size;
+	unsigned char data[0];
+};
+
+/*
+ * SDIO function devices
+ */
+struct sdio_func {
+	struct mmc_card		*card;		/* the card this device belongs to */
+	struct device		dev;		/* the device */
+	sdio_irq_handler_t	*irq_handler;	/* IRQ callback */
+	unsigned int		num;		/* function number */
+
+	unsigned char		class;		/* standard interface class */
+	unsigned short		vendor;		/* vendor id */
+	unsigned short		device;		/* device id */
+
+	unsigned		max_blksize;	/* maximum block size */
+	unsigned		cur_blksize;	/* current block size */
+
+	unsigned int		state;		/* function state */
+#define SDIO_STATE_PRESENT	(1<<0)		/* present in sysfs */
+
+	u8			tmpbuf[4];	/* DMA:able scratch buffer */
+
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+
+	struct sdio_func_tuple *tuples;
+};
+
+#define sdio_func_present(f)	((f)->state & SDIO_STATE_PRESENT)
+
+#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
+
+#define sdio_func_id(f)		((f)->dev.bus_id)
+
+#define sdio_get_drvdata(f)	dev_get_drvdata(&(f)->dev)
+#define sdio_set_drvdata(f,d)	dev_set_drvdata(&(f)->dev, d)
+
+/*
+ * SDIO function device driver
+ */
+struct sdio_driver {
+	char *name;
+	const struct sdio_device_id *id_table;
+
+	int (*probe)(struct sdio_func *, const struct sdio_device_id *);
+	void (*remove)(struct sdio_func *);
+
+	struct device_driver drv;
+};
+
+/**
+ * SDIO_DEVICE - macro used to describe a specific SDIO device
+ * @vend: the 16 bit manufacturer code
+ * @dev: the 16 bit function id
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific device. The class field will be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE(vend,dev) \
+	.class = SDIO_ANY_ID, \
+	.vendor = (vend), .device = (dev)
+
+/**
+ * SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
+ * @dev_class: the 8 bit standard interface code
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific standard SDIO function type.  The vendor and device fields will
+ * be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE_CLASS(dev_class) \
+	.class = (dev_class), \
+	.vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
+
+extern int sdio_register_driver(struct sdio_driver *);
+extern void sdio_unregister_driver(struct sdio_driver *);
+
+/*
+ * SDIO I/O operations
+ */
+extern void sdio_claim_host(struct sdio_func *func);
+extern void sdio_release_host(struct sdio_func *func);
+
+extern int sdio_enable_func(struct sdio_func *func);
+extern int sdio_disable_func(struct sdio_func *func);
+
+extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
+
+extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
+extern int sdio_release_irq(struct sdio_func *func);
+
+extern unsigned char sdio_readb(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern unsigned short sdio_readw(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern unsigned long sdio_readl(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+extern int sdio_readsb(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+
+extern void sdio_writeb(struct sdio_func *func, unsigned char b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writew(struct sdio_func *func, unsigned short b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writel(struct sdio_func *func, unsigned long b,
+	unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+
+extern unsigned char sdio_f0_readb(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
+	unsigned int addr, int *err_ret);
+
+#endif
+
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
new file mode 100644
index 00000000000..09306d47ff5
--- /dev/null
+++ b/include/linux/mmc/sdio_ids.h
@@ -0,0 +1,23 @@
+/*
+ * SDIO Classes, Interface Types, Manufacturer IDs, etc.
+ */
+
+#ifndef MMC_SDIO_IDS_H
+#define MMC_SDIO_IDS_H
+
+/*
+ * Standard SDIO Function Interfaces
+ */
+
+#define SDIO_CLASS_NONE		0x00	/* Not a SDIO standard interface */
+#define SDIO_CLASS_UART		0x01	/* standard UART interface */
+#define SDIO_CLASS_BT_A		0x02	/* Type-A BlueTooth std interface */
+#define SDIO_CLASS_BT_B		0x03	/* Type-B BlueTooth std interface */
+#define SDIO_CLASS_GPS		0x04	/* GPS standard interface */
+#define SDIO_CLASS_CAMERA	0x05	/* Camera standard interface */
+#define SDIO_CLASS_PHS		0x06	/* PHS standard interface */
+#define SDIO_CLASS_WLAN		0x07	/* WLAN interface */
+#define SDIO_CLASS_ATA		0x08	/* Embedded SDIO-ATA std interface */
+
+
+#endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 4dc5fa8be78..74523d999f7 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -340,4 +340,30 @@ struct parisc_device_id {
 #define PA_HVERSION_ANY_ID	0xffff
 #define PA_SVERSION_ANY_ID	0xffffffff
 
+/* SDIO */
+
+#define SDIO_ANY_ID (~0)
+
+struct sdio_device_id {
+	__u8	class;			/* Standard interface or SDIO_ANY_ID */
+	__u16	vendor;			/* Vendor or SDIO_ANY_ID */
+	__u16	device;			/* Device ID or SDIO_ANY_ID */
+	kernel_ulong_t driver_data;	/* Data private to the driver */
+};
+
+/* SSB core, see drivers/ssb/ */
+struct ssb_device_id {
+	__u16	vendor;
+	__u16	coreid;
+	__u8	revision;
+};
+#define SSB_DEVICE(_vendor, _coreid, _revision)  \
+	{ .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
+#define SSB_DEVTABLE_END  \
+	{ 0, },
+
+#define SSB_ANY_VENDOR		0xFFFF
+#define SSB_ANY_ID		0xFFFF
+#define SSB_ANY_REV		0xFF
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/net.h b/include/linux/net.h
index efc45177b50..c136abce7ef 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -23,6 +23,7 @@
 
 struct poll_table_struct;
 struct inode;
+struct net;
 
 #define NPROTO		34		/* should be enough for now..	*/
 
@@ -169,7 +170,7 @@ struct proto_ops {
 
 struct net_proto_family {
 	int		family;
-	int		(*create)(struct socket *sock, int protocol);
+	int		(*create)(struct net *net, struct socket *sock, int protocol);
 	struct module	*owner;
 };
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index e679b275166..5a11f889e56 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -31,6 +31,7 @@
 
 #ifdef __KERNEL__
 #include <linux/timer.h>
+#include <linux/delay.h>
 #include <asm/atomic.h>
 #include <asm/cache.h>
 #include <asm/byteorder.h>
@@ -38,6 +39,9 @@
 #include <linux/device.h>
 #include <linux/percpu.h>
 #include <linux/dmaengine.h>
+#include <linux/workqueue.h>
+
+#include <net/net_namespace.h>
 
 struct vlan_group;
 struct ethtool_ops;
@@ -246,6 +250,19 @@ struct hh_cache
 #define LL_RESERVED_SPACE_EXTRA(dev,extra) \
 	((((dev)->hard_header_len+extra)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
 
+struct header_ops {
+	int	(*create) (struct sk_buff *skb, struct net_device *dev,
+			   unsigned short type, const void *daddr,
+			   const void *saddr, unsigned len);
+	int	(*parse)(const struct sk_buff *skb, unsigned char *haddr);
+	int	(*rebuild)(struct sk_buff *skb);
+#define HAVE_HEADER_CACHE
+	int	(*cache)(const struct neighbour *neigh, struct hh_cache *hh);
+	void	(*cache_update)(struct hh_cache *hh,
+				const struct net_device *dev,
+				const unsigned char *haddr);
+};
+
 /* These flag bits are private to the generic network queueing
  * layer, they may not be explicitly referenced by any other
  * code.
@@ -258,7 +275,6 @@ enum netdev_state_t
 	__LINK_STATE_PRESENT,
 	__LINK_STATE_SCHED,
 	__LINK_STATE_NOCARRIER,
-	__LINK_STATE_RX_SCHED,
 	__LINK_STATE_LINKWATCH_PENDING,
 	__LINK_STATE_DORMANT,
 	__LINK_STATE_QDISC_RUNNING,
@@ -278,6 +294,120 @@ struct netdev_boot_setup {
 extern int __init netdev_boot_setup(char *str);
 
 /*
+ * Structure for NAPI scheduling similar to tasklet but with weighting
+ */
+struct napi_struct {
+	/* The poll_list must only be managed by the entity which
+	 * changes the state of the NAPI_STATE_SCHED bit.  This means
+	 * whoever atomically sets that bit can add this napi_struct
+	 * to the per-cpu poll_list, and whoever clears that bit
+	 * can remove from the list right before clearing the bit.
+	 */
+	struct list_head	poll_list;
+
+	unsigned long		state;
+	int			weight;
+	int			(*poll)(struct napi_struct *, int);
+#ifdef CONFIG_NETPOLL
+	spinlock_t		poll_lock;
+	int			poll_owner;
+	struct net_device	*dev;
+	struct list_head	dev_list;
+#endif
+};
+
+enum
+{
+	NAPI_STATE_SCHED,	/* Poll is scheduled */
+};
+
+extern void FASTCALL(__napi_schedule(struct napi_struct *n));
+
+/**
+ *	napi_schedule_prep - check if napi can be scheduled
+ *	@n: napi context
+ *
+ * Test if NAPI routine is already running, and if not mark
+ * it as running.  This is used as a condition variable
+ * insure only one NAPI poll instance runs
+ */
+static inline int napi_schedule_prep(struct napi_struct *n)
+{
+	return !test_and_set_bit(NAPI_STATE_SCHED, &n->state);
+}
+
+/**
+ *	napi_schedule - schedule NAPI poll
+ *	@n: napi context
+ *
+ * Schedule NAPI poll routine to be called if it is not already
+ * running.
+ */
+static inline void napi_schedule(struct napi_struct *n)
+{
+	if (napi_schedule_prep(n))
+		__napi_schedule(n);
+}
+
+/* Try to reschedule poll. Called by dev->poll() after napi_complete().  */
+static inline int napi_reschedule(struct napi_struct *napi)
+{
+	if (napi_schedule_prep(napi)) {
+		__napi_schedule(napi);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ *	napi_complete - NAPI processing complete
+ *	@n: napi context
+ *
+ * Mark NAPI processing as complete.
+ */
+static inline void __napi_complete(struct napi_struct *n)
+{
+	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
+	list_del(&n->poll_list);
+	smp_mb__before_clear_bit();
+	clear_bit(NAPI_STATE_SCHED, &n->state);
+}
+
+static inline void napi_complete(struct napi_struct *n)
+{
+	local_irq_disable();
+	__napi_complete(n);
+	local_irq_enable();
+}
+
+/**
+ *	napi_disable - prevent NAPI from scheduling
+ *	@n: napi context
+ *
+ * Stop NAPI from being scheduled on this context.
+ * Waits till any outstanding processing completes.
+ */
+static inline void napi_disable(struct napi_struct *n)
+{
+	while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
+		msleep_interruptible(1);
+}
+
+/**
+ *	napi_enable - enable NAPI scheduling
+ *	@n: napi context
+ *
+ * Resume NAPI from being scheduled on this context.
+ * Must be paired with napi_disable.
+ */
+static inline void napi_enable(struct napi_struct *n)
+{
+	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
+	smp_mb__before_clear_bit();
+	clear_bit(NAPI_STATE_SCHED, &n->state);
+}
+
+/*
  *	The DEVICE structure.
  *	Actually, this whole structure is a big mistake.  It mixes I/O
  *	data with strictly "high-level" data, and it has to know about
@@ -319,6 +449,9 @@ struct net_device
 	unsigned long		state;
 
 	struct list_head	dev_list;
+#ifdef CONFIG_NETPOLL
+	struct list_head	napi_list;
+#endif
 	
 	/* The device initialization function. Called only once. */
 	int			(*init)(struct net_device *dev);
@@ -339,8 +472,11 @@ struct net_device
 #define NETIF_F_HW_VLAN_FILTER	512	/* Receive filtering on VLAN */
 #define NETIF_F_VLAN_CHALLENGED	1024	/* Device cannot handle VLAN packets */
 #define NETIF_F_GSO		2048	/* Enable software GSO. */
-#define NETIF_F_LLTX		4096	/* LockLess TX */
+#define NETIF_F_LLTX		4096	/* LockLess TX - deprecated. Please */
+					/* do not use LLTX in new drivers */
+#define NETIF_F_NETNS_LOCAL	8192	/* Does not change network namespaces */
 #define NETIF_F_MULTI_QUEUE	16384	/* Has multiple TX/RX queues */
+#define NETIF_F_LRO		32768	/* large receive offload */
 
 	/* Segmentation offload features */
 #define NETIF_F_GSO_SHIFT	16
@@ -379,6 +515,9 @@ struct net_device
 #endif
 	const struct ethtool_ops *ethtool_ops;
 
+	/* Hardware header description */
+	const struct header_ops *header_ops;
+
 	/*
 	 * This marks the end of the "visible" part of the structure. All
 	 * fields hereafter are internal to the system, and may change at
@@ -430,12 +569,6 @@ struct net_device
 /*
  * Cache line mostly used on receive path (including eth_type_trans())
  */
-	struct list_head	poll_list ____cacheline_aligned_in_smp;
-					/* Link to poll list	*/
-
-	int			(*poll) (struct net_device *dev, int *quota);
-	int			quota;
-	int			weight;
 	unsigned long		last_rx;	/* Time of last Rx	*/
 	/* Interface address info used in eth_type_trans() */
 	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address, (before bcast 
@@ -508,13 +641,6 @@ struct net_device
 	int			(*open)(struct net_device *dev);
 	int			(*stop)(struct net_device *dev);
 #define HAVE_NETDEV_POLL
-	int			(*hard_header) (struct sk_buff *skb,
-						struct net_device *dev,
-						unsigned short type,
-						void *daddr,
-						void *saddr,
-						unsigned len);
-	int			(*rebuild_header)(struct sk_buff *skb);
 #define HAVE_CHANGE_RX_FLAGS
 	void			(*change_rx_flags)(struct net_device *dev,
 						   int flags);
@@ -531,12 +657,6 @@ struct net_device
 #define HAVE_SET_CONFIG
 	int			(*set_config)(struct net_device *dev,
 					      struct ifmap *map);
-#define HAVE_HEADER_CACHE
-	int			(*hard_header_cache)(struct neighbour *neigh,
-						     struct hh_cache *hh);
-	void			(*header_cache_update)(struct hh_cache *hh,
-						       struct net_device *dev,
-						       unsigned char *  haddr);
 #define HAVE_CHANGE_MTU
 	int			(*change_mtu)(struct net_device *dev, int new_mtu);
 
@@ -550,8 +670,6 @@ struct net_device
 	void			(*vlan_rx_kill_vid)(struct net_device *dev,
 						    unsigned short vid);
 
-	int			(*hard_header_parse)(struct sk_buff *skb,
-						     unsigned char *haddr);
 	int			(*neigh_setup)(struct net_device *dev, struct neigh_parms *);
 #ifdef CONFIG_NETPOLL
 	struct netpoll_info	*npinfo;
@@ -560,6 +678,9 @@ struct net_device
 	void                    (*poll_controller)(struct net_device *dev);
 #endif
 
+	/* Network namespace this network device is inside */
+	struct net		*nd_net;
+
 	/* bridge stuff */
 	struct net_bridge_port	*br_port;
 	/* macvlan */
@@ -582,17 +703,39 @@ struct net_device
 #define	NETDEV_ALIGN		32
 #define	NETDEV_ALIGN_CONST	(NETDEV_ALIGN - 1)
 
+/**
+ *	netdev_priv - access network device private data
+ *	@dev: network device
+ *
+ * Get network device private data
+ */
 static inline void *netdev_priv(const struct net_device *dev)
 {
 	return dev->priv;
 }
 
-#define SET_MODULE_OWNER(dev) do { } while (0)
 /* Set the sysfs physical device reference for the network logical device
  * if set prior to registration will cause a symlink during initialization.
  */
 #define SET_NETDEV_DEV(net, pdev)	((net)->dev.parent = (pdev))
 
+static inline void netif_napi_add(struct net_device *dev,
+				  struct napi_struct *napi,
+				  int (*poll)(struct napi_struct *, int),
+				  int weight)
+{
+	INIT_LIST_HEAD(&napi->poll_list);
+	napi->poll = poll;
+	napi->weight = weight;
+#ifdef CONFIG_NETPOLL
+	napi->dev = dev;
+	list_add(&napi->dev_list, &dev->napi_list);
+	spin_lock_init(&napi->poll_lock);
+	napi->poll_owner = -1;
+#endif
+	set_bit(NAPI_STATE_SCHED, &napi->state);
+}
+
 struct packet_type {
 	__be16			type;	/* This is really htons(ether_type). */
 	struct net_device	*dev;	/* NULL is wildcarded here	     */
@@ -610,45 +753,46 @@ struct packet_type {
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
 
-extern struct net_device		loopback_dev;		/* The loopback */
-extern struct list_head			dev_base_head;		/* All devices */
 extern rwlock_t				dev_base_lock;		/* Device list lock */
 
-#define for_each_netdev(d)		\
-		list_for_each_entry(d, &dev_base_head, dev_list)
-#define for_each_netdev_safe(d, n)	\
-		list_for_each_entry_safe(d, n, &dev_base_head, dev_list)
-#define for_each_netdev_continue(d)		\
-		list_for_each_entry_continue(d, &dev_base_head, dev_list)
+
+#define for_each_netdev(net, d)		\
+		list_for_each_entry(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_safe(net, d, n)	\
+		list_for_each_entry_safe(d, n, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_continue(net, d)		\
+		list_for_each_entry_continue(d, &(net)->dev_base_head, dev_list)
 #define net_device_entry(lh)	list_entry(lh, struct net_device, dev_list)
 
 static inline struct net_device *next_net_device(struct net_device *dev)
 {
 	struct list_head *lh;
+	struct net *net;
 
+	net = dev->nd_net;
 	lh = dev->dev_list.next;
-	return lh == &dev_base_head ? NULL : net_device_entry(lh);
+	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
 }
 
-static inline struct net_device *first_net_device(void)
+static inline struct net_device *first_net_device(struct net *net)
 {
-	return list_empty(&dev_base_head) ? NULL :
-		net_device_entry(dev_base_head.next);
+	return list_empty(&net->dev_base_head) ? NULL :
+		net_device_entry(net->dev_base_head.next);
 }
 
 extern int 			netdev_boot_setup_check(struct net_device *dev);
 extern unsigned long		netdev_boot_base(const char *prefix, int unit);
-extern struct net_device    *dev_getbyhwaddr(unsigned short type, char *hwaddr);
-extern struct net_device *dev_getfirstbyhwtype(unsigned short type);
-extern struct net_device *__dev_getfirstbyhwtype(unsigned short type);
+extern struct net_device    *dev_getbyhwaddr(struct net *net, unsigned short type, char *hwaddr);
+extern struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type);
+extern struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type);
 extern void		dev_add_pack(struct packet_type *pt);
 extern void		dev_remove_pack(struct packet_type *pt);
 extern void		__dev_remove_pack(struct packet_type *pt);
 
-extern struct net_device	*dev_get_by_flags(unsigned short flags,
+extern struct net_device	*dev_get_by_flags(struct net *net, unsigned short flags,
 						  unsigned short mask);
-extern struct net_device	*dev_get_by_name(const char *name);
-extern struct net_device	*__dev_get_by_name(const char *name);
+extern struct net_device	*dev_get_by_name(struct net *net, const char *name);
+extern struct net_device	*__dev_get_by_name(struct net *net, const char *name);
 extern int		dev_alloc_name(struct net_device *dev, const char *name);
 extern int		dev_open(struct net_device *dev);
 extern int		dev_close(struct net_device *dev);
@@ -659,14 +803,35 @@ extern void		free_netdev(struct net_device *dev);
 extern void		synchronize_net(void);
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
 extern int		unregister_netdevice_notifier(struct notifier_block *nb);
-extern int		call_netdevice_notifiers(unsigned long val, void *v);
-extern struct net_device	*dev_get_by_index(int ifindex);
-extern struct net_device	*__dev_get_by_index(int ifindex);
+extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
+extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
+extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
 extern int		dev_restart(struct net_device *dev);
 #ifdef CONFIG_NETPOLL_TRAP
 extern int		netpoll_trap(void);
 #endif
 
+static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
+				  unsigned short type,
+				  const void *daddr, const void *saddr,
+				  unsigned len)
+{
+	if (!dev->header_ops)
+		return 0;
+
+	return dev->header_ops->create(skb, dev, type, daddr, saddr, len);
+}
+
+static inline int dev_parse_header(const struct sk_buff *skb,
+				   unsigned char *haddr)
+{
+	const struct net_device *dev = skb->dev;
+
+	if (!dev->header_ops->parse)
+		return 0;
+	return dev->header_ops->parse(skb, haddr);
+}
+
 typedef int gifconf_func_t(struct net_device * dev, char __user * bufptr, int len);
 extern int		register_gifconf(unsigned int family, gifconf_func_t * gifconf);
 static inline int unregister_gifconf(unsigned int family)
@@ -678,7 +843,6 @@ static inline int unregister_gifconf(unsigned int family)
  * Incoming packets are placed on per-cpu queues so that
  * no locking is needed.
  */
-
 struct softnet_data
 {
 	struct net_device	*output_queue;
@@ -686,7 +850,7 @@ struct softnet_data
 	struct list_head	poll_list;
 	struct sk_buff		*completion_queue;
 
-	struct net_device	backlog_dev;	/* Sorry. 8) */
+	struct napi_struct	backlog;
 #ifdef CONFIG_NET_DMA
 	struct dma_chan		*net_dma;
 #endif
@@ -704,11 +868,24 @@ static inline void netif_schedule(struct net_device *dev)
 		__netif_schedule(dev);
 }
 
+/**
+ *	netif_start_queue - allow transmit
+ *	@dev: network device
+ *
+ *	Allow upper layers to call the device hard_start_xmit routine.
+ */
 static inline void netif_start_queue(struct net_device *dev)
 {
 	clear_bit(__LINK_STATE_XOFF, &dev->state);
 }
 
+/**
+ *	netif_wake_queue - restart transmit
+ *	@dev: network device
+ *
+ *	Allow upper layers to call the device hard_start_xmit routine.
+ *	Used for flow control when transmit resources are available.
+ */
 static inline void netif_wake_queue(struct net_device *dev)
 {
 #ifdef CONFIG_NETPOLL_TRAP
@@ -721,16 +898,35 @@ static inline void netif_wake_queue(struct net_device *dev)
 		__netif_schedule(dev);
 }
 
+/**
+ *	netif_stop_queue - stop transmitted packets
+ *	@dev: network device
+ *
+ *	Stop upper layers calling the device hard_start_xmit routine.
+ *	Used for flow control when transmit resources are unavailable.
+ */
 static inline void netif_stop_queue(struct net_device *dev)
 {
 	set_bit(__LINK_STATE_XOFF, &dev->state);
 }
 
+/**
+ *	netif_queue_stopped - test if transmit queue is flowblocked
+ *	@dev: network device
+ *
+ *	Test if transmit queue on device is currently unable to send.
+ */
 static inline int netif_queue_stopped(const struct net_device *dev)
 {
 	return test_bit(__LINK_STATE_XOFF, &dev->state);
 }
 
+/**
+ *	netif_running - test if up
+ *	@dev: network device
+ *
+ *	Test if the device has been brought up.
+ */
 static inline int netif_running(const struct net_device *dev)
 {
 	return test_bit(__LINK_STATE_START, &dev->state);
@@ -742,6 +938,14 @@ static inline int netif_running(const struct net_device *dev)
  * done at the overall netdevice level.
  * Also test the device if we're multiqueue.
  */
+
+/**
+ *	netif_start_subqueue - allow sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Start individual transmit queue of a device with multiple transmit queues.
+ */
 static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
 {
 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
@@ -749,6 +953,13 @@ static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
 #endif
 }
 
+/**
+ *	netif_stop_subqueue - stop sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Stop individual transmit queue of a device with multiple transmit queues.
+ */
 static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
 {
 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
@@ -760,6 +971,13 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
 #endif
 }
 
+/**
+ *	netif_subqueue_stopped - test status of subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Check individual transmit queue of a device with multiple transmit queues.
+ */
 static inline int netif_subqueue_stopped(const struct net_device *dev,
 					 u16 queue_index)
 {
@@ -771,6 +989,14 @@ static inline int netif_subqueue_stopped(const struct net_device *dev,
 #endif
 }
 
+
+/**
+ *	netif_wake_subqueue - allow sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Resume individual transmit queue of a device with multiple transmit queues.
+ */
 static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
 {
 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
@@ -784,6 +1010,13 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
 #endif
 }
 
+/**
+ *	netif_is_multiqueue - test if device has multiple transmit queues
+ *	@dev: network device
+ *
+ * Check if device has multiple transmit queues
+ * Always falls if NETDEVICE_MULTIQUEUE is not configured
+ */
 static inline int netif_is_multiqueue(const struct net_device *dev)
 {
 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
@@ -796,20 +1029,7 @@ static inline int netif_is_multiqueue(const struct net_device *dev)
 /* Use this variant when it is known for sure that it
  * is executing from interrupt context.
  */
-static inline void dev_kfree_skb_irq(struct sk_buff *skb)
-{
-	if (atomic_dec_and_test(&skb->users)) {
-		struct softnet_data *sd;
-		unsigned long flags;
-
-		local_irq_save(flags);
-		sd = &__get_cpu_var(softnet_data);
-		skb->next = sd->completion_queue;
-		sd->completion_queue = skb;
-		raise_softirq_irqoff(NET_TX_SOFTIRQ);
-		local_irq_restore(flags);
-	}
-}
+extern void dev_kfree_skb_irq(struct sk_buff *skb);
 
 /* Use this variant in places where it could be invoked
  * either from interrupt or non-interrupt context.
@@ -822,29 +1042,41 @@ extern int		netif_rx_ni(struct sk_buff *skb);
 #define HAVE_NETIF_RECEIVE_SKB 1
 extern int		netif_receive_skb(struct sk_buff *skb);
 extern int		dev_valid_name(const char *name);
-extern int		dev_ioctl(unsigned int cmd, void __user *);
-extern int		dev_ethtool(struct ifreq *);
+extern int		dev_ioctl(struct net *net, unsigned int cmd, void __user *);
+extern int		dev_ethtool(struct net *net, struct ifreq *);
 extern unsigned		dev_get_flags(const struct net_device *);
 extern int		dev_change_flags(struct net_device *, unsigned);
 extern int		dev_change_name(struct net_device *, char *);
+extern int		dev_change_net_namespace(struct net_device *,
+						 struct net *, const char *);
 extern int		dev_set_mtu(struct net_device *, int);
 extern int		dev_set_mac_address(struct net_device *,
 					    struct sockaddr *);
 extern int		dev_hard_start_xmit(struct sk_buff *skb,
 					    struct net_device *dev);
 
-extern void		dev_init(void);
-
 extern int		netdev_budget;
 
 /* Called by rtnetlink.c:rtnl_unlock() */
 extern void netdev_run_todo(void);
 
+/**
+ *	dev_put - release reference to device
+ *	@dev: network device
+ *
+ * Release reference to device to allow it to be freed.
+ */
 static inline void dev_put(struct net_device *dev)
 {
 	atomic_dec(&dev->refcnt);
 }
 
+/**
+ *	dev_hold - get reference to device
+ *	@dev: network device
+ *
+ * Hold reference to device to keep it from being freed.
+ */
 static inline void dev_hold(struct net_device *dev)
 {
 	atomic_inc(&dev->refcnt);
@@ -861,6 +1093,12 @@ static inline void dev_hold(struct net_device *dev)
 
 extern void linkwatch_fire_event(struct net_device *dev);
 
+/**
+ *	netif_carrier_ok - test if carrier present
+ *	@dev: network device
+ *
+ * Check if carrier is present on device
+ */
 static inline int netif_carrier_ok(const struct net_device *dev)
 {
 	return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
@@ -872,30 +1110,66 @@ extern void netif_carrier_on(struct net_device *dev);
 
 extern void netif_carrier_off(struct net_device *dev);
 
+/**
+ *	netif_dormant_on - mark device as dormant.
+ *	@dev: network device
+ *
+ * Mark device as dormant (as per RFC2863).
+ *
+ * The dormant state indicates that the relevant interface is not
+ * actually in a condition to pass packets (i.e., it is not 'up') but is
+ * in a "pending" state, waiting for some external event.  For "on-
+ * demand" interfaces, this new state identifies the situation where the
+ * interface is waiting for events to place it in the up state.
+ *
+ */
 static inline void netif_dormant_on(struct net_device *dev)
 {
 	if (!test_and_set_bit(__LINK_STATE_DORMANT, &dev->state))
 		linkwatch_fire_event(dev);
 }
 
+/**
+ *	netif_dormant_off - set device as not dormant.
+ *	@dev: network device
+ *
+ * Device is not in dormant state.
+ */
 static inline void netif_dormant_off(struct net_device *dev)
 {
 	if (test_and_clear_bit(__LINK_STATE_DORMANT, &dev->state))
 		linkwatch_fire_event(dev);
 }
 
+/**
+ *	netif_dormant - test if carrier present
+ *	@dev: network device
+ *
+ * Check if carrier is present on device
+ */
 static inline int netif_dormant(const struct net_device *dev)
 {
 	return test_bit(__LINK_STATE_DORMANT, &dev->state);
 }
 
 
+/**
+ *	netif_oper_up - test if device is operational
+ *	@dev: network device
+ *
+ * Check if carrier is operational
+ */
 static inline int netif_oper_up(const struct net_device *dev) {
 	return (dev->operstate == IF_OPER_UP ||
 		dev->operstate == IF_OPER_UNKNOWN /* backward compat */);
 }
 
-/* Hot-plugging. */
+/**
+ *	netif_device_present - is device available or removed
+ *	@dev: network device
+ *
+ * Check if device has not been removed from system.
+ */
 static inline int netif_device_present(struct net_device *dev)
 {
 	return test_bit(__LINK_STATE_PRESENT, &dev->state);
@@ -955,46 +1229,38 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
 	return (1 << debug_value) - 1;
 }
 
-/* Test if receive needs to be scheduled */
-static inline int __netif_rx_schedule_prep(struct net_device *dev)
-{
-	return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state);
-}
-
 /* Test if receive needs to be scheduled but only if up */
-static inline int netif_rx_schedule_prep(struct net_device *dev)
+static inline int netif_rx_schedule_prep(struct net_device *dev,
+					 struct napi_struct *napi)
 {
-	return netif_running(dev) && __netif_rx_schedule_prep(dev);
+	return netif_running(dev) && napi_schedule_prep(napi);
 }
 
 /* Add interface to tail of rx poll list. This assumes that _prep has
  * already been called and returned 1.
  */
-
-extern void __netif_rx_schedule(struct net_device *dev);
+static inline void __netif_rx_schedule(struct net_device *dev,
+				       struct napi_struct *napi)
+{
+	dev_hold(dev);
+	__napi_schedule(napi);
+}
 
 /* Try to reschedule poll. Called by irq handler. */
 
-static inline void netif_rx_schedule(struct net_device *dev)
+static inline void netif_rx_schedule(struct net_device *dev,
+				     struct napi_struct *napi)
 {
-	if (netif_rx_schedule_prep(dev))
-		__netif_rx_schedule(dev);
+	if (netif_rx_schedule_prep(dev, napi))
+		__netif_rx_schedule(dev, napi);
 }
 
-/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete().
- * Do not inline this?
- */
-static inline int netif_rx_reschedule(struct net_device *dev, int undo)
+/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete().  */
+static inline int netif_rx_reschedule(struct net_device *dev,
+				      struct napi_struct *napi)
 {
-	if (netif_rx_schedule_prep(dev)) {
-		unsigned long flags;
-
-		dev->quota += undo;
-
-		local_irq_save(flags);
-		list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
-		__raise_softirq_irqoff(NET_RX_SOFTIRQ);
-		local_irq_restore(flags);
+	if (napi_schedule_prep(napi)) {
+		__netif_rx_schedule(dev, napi);
 		return 1;
 	}
 	return 0;
@@ -1003,12 +1269,11 @@ static inline int netif_rx_reschedule(struct net_device *dev, int undo)
 /* same as netif_rx_complete, except that local_irq_save(flags)
  * has already been issued
  */
-static inline void __netif_rx_complete(struct net_device *dev)
+static inline void __netif_rx_complete(struct net_device *dev,
+				       struct napi_struct *napi)
 {
-	BUG_ON(!test_bit(__LINK_STATE_RX_SCHED, &dev->state));
-	list_del(&dev->poll_list);
-	smp_mb__before_clear_bit();
-	clear_bit(__LINK_STATE_RX_SCHED, &dev->state);
+	__napi_complete(napi);
+	dev_put(dev);
 }
 
 /* Remove interface from poll list: it must be in the poll list
@@ -1016,32 +1281,31 @@ static inline void __netif_rx_complete(struct net_device *dev)
  * it completes the work. The device cannot be out of poll list at this
  * moment, it is BUG().
  */
-static inline void netif_rx_complete(struct net_device *dev)
+static inline void netif_rx_complete(struct net_device *dev,
+				     struct napi_struct *napi)
 {
 	unsigned long flags;
 
 	local_irq_save(flags);
-	__netif_rx_complete(dev);
+	__netif_rx_complete(dev, napi);
 	local_irq_restore(flags);
 }
 
-static inline void netif_poll_disable(struct net_device *dev)
-{
-	while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state))
-		/* No hurry. */
-		schedule_timeout_interruptible(1);
-}
-
-static inline void netif_poll_enable(struct net_device *dev)
+/**
+ *	netif_tx_lock - grab network device transmit lock
+ *	@dev: network device
+ *
+ * Get network device transmit lock
+ */
+static inline void __netif_tx_lock(struct net_device *dev, int cpu)
 {
-	smp_mb__before_clear_bit();
-	clear_bit(__LINK_STATE_RX_SCHED, &dev->state);
+	spin_lock(&dev->_xmit_lock);
+	dev->xmit_lock_owner = cpu;
 }
 
 static inline void netif_tx_lock(struct net_device *dev)
 {
-	spin_lock(&dev->_xmit_lock);
-	dev->xmit_lock_owner = smp_processor_id();
+	__netif_tx_lock(dev, smp_processor_id());
 }
 
 static inline void netif_tx_lock_bh(struct net_device *dev)
@@ -1070,6 +1334,18 @@ static inline void netif_tx_unlock_bh(struct net_device *dev)
 	spin_unlock_bh(&dev->_xmit_lock);
 }
 
+#define HARD_TX_LOCK(dev, cpu) {			\
+	if ((dev->features & NETIF_F_LLTX) == 0) {	\
+		__netif_tx_lock(dev, cpu);			\
+	}						\
+}
+
+#define HARD_TX_UNLOCK(dev) {				\
+	if ((dev->features & NETIF_F_LLTX) == 0) {	\
+		netif_tx_unlock(dev);			\
+	}						\
+}
+
 static inline void netif_tx_disable(struct net_device *dev)
 {
 	netif_tx_lock_bh(dev);
@@ -1105,7 +1381,7 @@ extern void		dev_set_allmulti(struct net_device *dev, int inc);
 extern void		netdev_state_change(struct net_device *dev);
 extern void		netdev_features_change(struct net_device *dev);
 /* Load a device via the kmod */
-extern void		dev_load(const char *name);
+extern void		dev_load(struct net *net, const char *name);
 extern void		dev_mcast_init(void);
 extern int		netdev_max_backlog;
 extern int		weight_p;
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index ab57cb7d7c6..f2eaea2234e 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -40,5 +40,6 @@ unifdef-y += nf_conntrack_common.h
 unifdef-y += nf_conntrack_ftp.h
 unifdef-y += nf_conntrack_tcp.h
 unifdef-y += nfnetlink.h
+unifdef-y += nfnetlink_compat.h
 unifdef-y += x_tables.h
 unifdef-y += xt_physdev.h
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index 0f9311df155..0d8424f7689 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -1,16 +1,7 @@
 #ifndef _NFNETLINK_H
 #define _NFNETLINK_H
 #include <linux/types.h>
-
-#ifndef __KERNEL__
-/* nfnetlink groups: Up to 32 maximum - backwards compatibility for userspace */
-#define NF_NETLINK_CONNTRACK_NEW 		0x00000001
-#define NF_NETLINK_CONNTRACK_UPDATE		0x00000002
-#define NF_NETLINK_CONNTRACK_DESTROY		0x00000004
-#define NF_NETLINK_CONNTRACK_EXP_NEW		0x00000008
-#define NF_NETLINK_CONNTRACK_EXP_UPDATE		0x00000010
-#define NF_NETLINK_CONNTRACK_EXP_DESTROY	0x00000020
-#endif
+#include <linux/netfilter/nfnetlink_compat.h>
 
 enum nfnetlink_groups {
 	NFNLGRP_NONE,
@@ -31,48 +22,6 @@ enum nfnetlink_groups {
 };
 #define NFNLGRP_MAX	(__NFNLGRP_MAX - 1)
 
-/* Generic structure for encapsulation optional netfilter information.
- * It is reminiscent of sockaddr, but with sa_family replaced
- * with attribute type. 
- * ! This should someday be put somewhere generic as now rtnetlink and
- * ! nfnetlink use the same attributes methods. - J. Schulist.
- */
-
-struct nfattr
-{
-	u_int16_t nfa_len;
-	u_int16_t nfa_type;	/* we use 15 bits for the type, and the highest
-				 * bit to indicate whether the payload is nested */
-};
-
-/* FIXME: Apart from NFNL_NFA_NESTED shamelessly copy and pasted from
- * rtnetlink.h, it's time to put this in a generic file */
-
-#define NFNL_NFA_NEST	0x8000
-#define NFA_TYPE(attr) 	((attr)->nfa_type & 0x7fff)
-
-#define NFA_ALIGNTO     4
-#define NFA_ALIGN(len)	(((len) + NFA_ALIGNTO - 1) & ~(NFA_ALIGNTO - 1))
-#define NFA_OK(nfa,len)	((len) > 0 && (nfa)->nfa_len >= sizeof(struct nfattr) \
-	&& (nfa)->nfa_len <= (len))
-#define NFA_NEXT(nfa,attrlen)	((attrlen) -= NFA_ALIGN((nfa)->nfa_len), \
-	(struct nfattr *)(((char *)(nfa)) + NFA_ALIGN((nfa)->nfa_len)))
-#define NFA_LENGTH(len)	(NFA_ALIGN(sizeof(struct nfattr)) + (len))
-#define NFA_SPACE(len)	NFA_ALIGN(NFA_LENGTH(len))
-#define NFA_DATA(nfa)   ((void *)(((char *)(nfa)) + NFA_LENGTH(0)))
-#define NFA_PAYLOAD(nfa) ((int)((nfa)->nfa_len) - NFA_LENGTH(0))
-#define NFA_NEST(skb, type) \
-({	struct nfattr *__start = (struct nfattr *)skb_tail_pointer(skb); \
-	NFA_PUT(skb, (NFNL_NFA_NEST | type), 0, NULL); \
-	__start;  })
-#define NFA_NEST_END(skb, start) \
-({      (start)->nfa_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
-        (skb)->len; })
-#define NFA_NEST_CANCEL(skb, start) \
-({      if (start) \
-                skb_trim(skb, (unsigned char *) (start) - (skb)->data); \
-        -1; })
-
 /* General form of address family dependent message.
  */
 struct nfgenmsg {
@@ -83,10 +32,6 @@ struct nfgenmsg {
 
 #define NFNETLINK_V0	0
 
-#define NFM_NFA(n)      ((struct nfattr *)(((char *)(n)) \
-        + NLMSG_ALIGN(sizeof(struct nfgenmsg))))
-#define NFM_PAYLOAD(n)  NLMSG_PAYLOAD(n, sizeof(struct nfgenmsg))
-
 /* netfilter netlink message types are split in two pieces:
  * 8 bit subsystem, 8bit operation.
  */
@@ -107,49 +52,26 @@ struct nfgenmsg {
 
 #include <linux/netlink.h>
 #include <linux/capability.h>
+#include <net/netlink.h>
 
 struct nfnl_callback
 {
 	int (*call)(struct sock *nl, struct sk_buff *skb, 
-		struct nlmsghdr *nlh, struct nfattr *cda[]);
-	u_int16_t attr_count;	/* number of nfattr's */
+		struct nlmsghdr *nlh, struct nlattr *cda[]);
+	const struct nla_policy *policy;	/* netlink attribute policy */
+	const u_int16_t attr_count;		/* number of nlattr's */
 };
 
 struct nfnetlink_subsystem
 {
 	const char *name;
-	__u8 subsys_id;		/* nfnetlink subsystem ID */
-	__u8 cb_count;		/* number of callbacks */
-	struct nfnl_callback *cb; /* callback for individual types */
+	__u8 subsys_id;			/* nfnetlink subsystem ID */
+	__u8 cb_count;			/* number of callbacks */
+	const struct nfnl_callback *cb;	/* callback for individual types */
 };
 
-extern void __nfa_fill(struct sk_buff *skb, int attrtype,
-        int attrlen, const void *data);
-#define NFA_PUT(skb, attrtype, attrlen, data) \
-({ if (skb_tailroom(skb) < (int)NFA_SPACE(attrlen)) goto nfattr_failure; \
-   __nfa_fill(skb, attrtype, attrlen, data); })
-
-extern int nfnetlink_subsys_register(struct nfnetlink_subsystem *n);
-extern int nfnetlink_subsys_unregister(struct nfnetlink_subsystem *n);
-
-extern void nfattr_parse(struct nfattr *tb[], int maxattr, 
-			struct nfattr *nfa, int len);
-
-#define nfattr_parse_nested(tb, max, nfa) \
-	nfattr_parse((tb), (max), NFA_DATA((nfa)), NFA_PAYLOAD((nfa)))
-
-#define nfattr_bad_size(tb, max, cta_min)				\
-({	int __i, __res = 0;						\
- 	for (__i=0; __i<max; __i++) {					\
- 		if (!cta_min[__i])					\
- 			continue;					\
- 		if (tb[__i] && NFA_PAYLOAD(tb[__i]) < cta_min[__i]){	\
- 			__res = 1;					\
- 			break;						\
- 		}							\
- 	}								\
- 	__res;								\
-})
+extern int nfnetlink_subsys_register(const struct nfnetlink_subsystem *n);
+extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n);
 
 extern int nfnetlink_has_listeners(unsigned int group);
 extern int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, 
diff --git a/include/linux/netfilter/nfnetlink_compat.h b/include/linux/netfilter/nfnetlink_compat.h
new file mode 100644
index 00000000000..02a42d875cf
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink_compat.h
@@ -0,0 +1,61 @@
+#ifndef _NFNETLINK_COMPAT_H
+#define _NFNETLINK_COMPAT_H
+#ifndef __KERNEL
+/* Old nfnetlink macros for userspace */
+
+/* nfnetlink groups: Up to 32 maximum */
+#define NF_NETLINK_CONNTRACK_NEW 		0x00000001
+#define NF_NETLINK_CONNTRACK_UPDATE		0x00000002
+#define NF_NETLINK_CONNTRACK_DESTROY		0x00000004
+#define NF_NETLINK_CONNTRACK_EXP_NEW		0x00000008
+#define NF_NETLINK_CONNTRACK_EXP_UPDATE		0x00000010
+#define NF_NETLINK_CONNTRACK_EXP_DESTROY	0x00000020
+
+/* Generic structure for encapsulation optional netfilter information.
+ * It is reminiscent of sockaddr, but with sa_family replaced
+ * with attribute type.
+ * ! This should someday be put somewhere generic as now rtnetlink and
+ * ! nfnetlink use the same attributes methods. - J. Schulist.
+ */
+
+struct nfattr
+{
+	u_int16_t nfa_len;
+	u_int16_t nfa_type;	/* we use 15 bits for the type, and the highest
+				 * bit to indicate whether the payload is nested */
+};
+
+/* FIXME: Apart from NFNL_NFA_NESTED shamelessly copy and pasted from
+ * rtnetlink.h, it's time to put this in a generic file */
+
+#define NFNL_NFA_NEST	0x8000
+#define NFA_TYPE(attr) 	((attr)->nfa_type & 0x7fff)
+
+#define NFA_ALIGNTO     4
+#define NFA_ALIGN(len)	(((len) + NFA_ALIGNTO - 1) & ~(NFA_ALIGNTO - 1))
+#define NFA_OK(nfa,len)	((len) > 0 && (nfa)->nfa_len >= sizeof(struct nfattr) \
+	&& (nfa)->nfa_len <= (len))
+#define NFA_NEXT(nfa,attrlen)	((attrlen) -= NFA_ALIGN((nfa)->nfa_len), \
+	(struct nfattr *)(((char *)(nfa)) + NFA_ALIGN((nfa)->nfa_len)))
+#define NFA_LENGTH(len)	(NFA_ALIGN(sizeof(struct nfattr)) + (len))
+#define NFA_SPACE(len)	NFA_ALIGN(NFA_LENGTH(len))
+#define NFA_DATA(nfa)   ((void *)(((char *)(nfa)) + NFA_LENGTH(0)))
+#define NFA_PAYLOAD(nfa) ((int)((nfa)->nfa_len) - NFA_LENGTH(0))
+#define NFA_NEST(skb, type) \
+({	struct nfattr *__start = (struct nfattr *)skb_tail_pointer(skb); \
+	NFA_PUT(skb, (NFNL_NFA_NEST | type), 0, NULL); \
+	__start;  })
+#define NFA_NEST_END(skb, start) \
+({      (start)->nfa_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
+        (skb)->len; })
+#define NFA_NEST_CANCEL(skb, start) \
+({      if (start) \
+                skb_trim(skb, (unsigned char *) (start) - (skb)->data); \
+        -1; })
+
+#define NFM_NFA(n)      ((struct nfattr *)(((char *)(n)) \
+        + NLMSG_ALIGN(sizeof(struct nfgenmsg))))
+#define NFM_PAYLOAD(n)  NLMSG_PAYLOAD(n, sizeof(struct nfgenmsg))
+
+#endif /* ! __KERNEL__ */
+#endif /* _NFNETLINK_COMPAT_H */
diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h
index d7c35039721..4affa3fe78e 100644
--- a/include/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/linux/netfilter/nfnetlink_conntrack.h
@@ -36,6 +36,7 @@ enum ctattr_type {
 	CTA_USE,
 	CTA_ID,
 	CTA_NAT_DST,
+	CTA_TUPLE_MASTER,
 	__CTA_MAX
 };
 #define CTA_MAX (__CTA_MAX - 1)
diff --git a/include/linux/netfilter/xt_time.h b/include/linux/netfilter/xt_time.h
new file mode 100644
index 00000000000..14b6df412c9
--- /dev/null
+++ b/include/linux/netfilter/xt_time.h
@@ -0,0 +1,25 @@
+#ifndef _XT_TIME_H
+#define _XT_TIME_H 1
+
+struct xt_time_info {
+	u_int32_t date_start;
+	u_int32_t date_stop;
+	u_int32_t daytime_start;
+	u_int32_t daytime_stop;
+	u_int32_t monthdays_match;
+	u_int8_t weekdays_match;
+	u_int8_t flags;
+};
+
+enum {
+	/* Match against local time (instead of UTC) */
+	XT_TIME_LOCAL_TZ = 1 << 0,
+
+	/* Shortcuts */
+	XT_TIME_ALL_MONTHDAYS = 0xFFFFFFFE,
+	XT_TIME_ALL_WEEKDAYS  = 0xFE,
+	XT_TIME_MIN_DAYTIME   = 0,
+	XT_TIME_MAX_DAYTIME   = 24 * 60 * 60 - 1,
+};
+
+#endif /* _XT_TIME_H */
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 83d8239f0cc..7c1f3b1d2ee 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -27,6 +27,8 @@
 
 #define MAX_LINKS 32		
 
+struct net;
+
 struct sockaddr_nl
 {
 	sa_family_t	nl_family;	/* AF_NETLINK	*/
@@ -129,6 +131,20 @@ struct nlattr
 	__u16           nla_type;
 };
 
+/*
+ * nla_type (16 bits)
+ * +---+---+-------------------------------+
+ * | N | O | Attribute Type                |
+ * +---+---+-------------------------------+
+ * N := Carries nested attributes
+ * O := Payload stored in network byte order
+ *
+ * Note: The N and O flag are mutually exclusive.
+ */
+#define NLA_F_NESTED		(1 << 15)
+#define NLA_F_NET_BYTEORDER	(1 << 14)
+#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
+
 #define NLA_ALIGNTO		4
 #define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
 #define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
@@ -157,8 +173,9 @@ struct netlink_skb_parms
 #define NETLINK_CREDS(skb)	(&NETLINK_CB((skb)).creds)
 
 
-extern struct sock *netlink_kernel_create(int unit, unsigned int groups,
-					  void (*input)(struct sock *sk, int len),
+extern struct sock *netlink_kernel_create(struct net *net,
+					  int unit,unsigned int groups,
+					  void (*input)(struct sk_buff *skb),
 					  struct mutex *cb_mutex,
 					  struct module *module);
 extern int netlink_change_ngroups(struct sock *sk, unsigned int groups);
@@ -177,7 +194,7 @@ struct sock *netlink_getsockbyfilp(struct file *filp);
 int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
 		long timeo, struct sock *ssk);
 void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
-int netlink_sendskb(struct sock *sk, struct sk_buff *skb, int protocol);
+int netlink_sendskb(struct sock *sk, struct sk_buff *skb);
 
 /*
  *	skb should fit one page. This choice is good for headerless malloc.
@@ -206,6 +223,7 @@ struct netlink_callback
 
 struct netlink_notify
 {
+	struct net *net;
 	int pid;
 	int protocol;
 };
diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h
index 29930b71a9a..20250d963d7 100644
--- a/include/linux/netpoll.h
+++ b/include/linux/netpoll.h
@@ -25,8 +25,6 @@ struct netpoll {
 
 struct netpoll_info {
 	atomic_t refcnt;
-	spinlock_t poll_lock;
-	int poll_owner;
 	int rx_flags;
 	spinlock_t rx_lock;
 	struct netpoll *rx_np; /* netpoll that registered an rx_hook */
@@ -37,6 +35,7 @@ struct netpoll_info {
 
 void netpoll_poll(struct netpoll *np);
 void netpoll_send_udp(struct netpoll *np, const char *msg, int len);
+void netpoll_print_options(struct netpoll *np);
 int netpoll_parse_options(struct netpoll *np, char *opt);
 int netpoll_setup(struct netpoll *np);
 int netpoll_trap(void);
@@ -64,32 +63,61 @@ static inline int netpoll_rx(struct sk_buff *skb)
 	return ret;
 }
 
-static inline void *netpoll_poll_lock(struct net_device *dev)
+static inline int netpoll_receive_skb(struct sk_buff *skb)
 {
+	if (!list_empty(&skb->dev->napi_list))
+		return netpoll_rx(skb);
+	return 0;
+}
+
+static inline void *netpoll_poll_lock(struct napi_struct *napi)
+{
+	struct net_device *dev = napi->dev;
+
 	rcu_read_lock(); /* deal with race on ->npinfo */
-	if (dev->npinfo) {
-		spin_lock(&dev->npinfo->poll_lock);
-		dev->npinfo->poll_owner = smp_processor_id();
-		return dev->npinfo;
+	if (dev && dev->npinfo) {
+		spin_lock(&napi->poll_lock);
+		napi->poll_owner = smp_processor_id();
+		return napi;
 	}
 	return NULL;
 }
 
 static inline void netpoll_poll_unlock(void *have)
 {
-	struct netpoll_info *npi = have;
+	struct napi_struct *napi = have;
 
-	if (npi) {
-		npi->poll_owner = -1;
-		spin_unlock(&npi->poll_lock);
+	if (napi) {
+		napi->poll_owner = -1;
+		spin_unlock(&napi->poll_lock);
 	}
 	rcu_read_unlock();
 }
 
+static inline void netpoll_netdev_init(struct net_device *dev)
+{
+	INIT_LIST_HEAD(&dev->napi_list);
+}
+
 #else
-#define netpoll_rx(a) 0
-#define netpoll_poll_lock(a) NULL
-#define netpoll_poll_unlock(a)
+static inline int netpoll_rx(struct sk_buff *skb)
+{
+	return 0;
+}
+static inline int netpoll_receive_skb(struct sk_buff *skb)
+{
+	return 0;
+}
+static inline void *netpoll_poll_lock(struct napi_struct *napi)
+{
+	return NULL;
+}
+static inline void netpoll_poll_unlock(void *have)
+{
+}
+static inline void netpoll_netdev_init(struct net_device *dev)
+{
+}
 #endif
 
 #endif
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 9a30ba2ca75..538ee1dd3d0 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -7,7 +7,97 @@
  */
 
 /**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ *	to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and
+ *	%NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ *	%NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+ *	on an %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ *	be sent from userspace to request creation of a new virtual interface,
+ *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ *	%NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ *	userspace to request deletion of a virtual interface, then requires
+ *	attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything inbetween, this is ABI! */
+	NL80211_CMD_UNSPEC,
+
+	NL80211_CMD_GET_WIPHY,		/* can dump */
+	NL80211_CMD_SET_WIPHY,
+	NL80211_CMD_NEW_WIPHY,
+	NL80211_CMD_DEL_WIPHY,
+
+	NL80211_CMD_GET_INTERFACE,	/* can dump */
+	NL80211_CMD_SET_INTERFACE,
+	NL80211_CMD_NEW_INTERFACE,
+	NL80211_CMD_DEL_INTERFACE,
+
+	/* add commands here */
+
+	/* used to define NL80211_CMD_MAX below */
+	__NL80211_CMD_AFTER_LAST,
+	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ *	/sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything inbetween, this is ABI! */
+	NL80211_ATTR_UNSPEC,
+
+	NL80211_ATTR_WIPHY,
+	NL80211_ATTR_WIPHY_NAME,
+
+	NL80211_ATTR_IFINDEX,
+	NL80211_ATTR_IFNAME,
+	NL80211_ATTR_IFTYPE,
+
+	/* add attributes here, update the policy in nl80211.c */
+
+	__NL80211_ATTR_AFTER_LAST,
+	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_iftype - (virtual) interface types
+ *
  * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
  * @NL80211_IFTYPE_ADHOC: independent BSS member
  * @NL80211_IFTYPE_STATION: managed BSS member
@@ -15,9 +105,10 @@
  * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
  * @NL80211_IFTYPE_WDS: wireless distribution interface
  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @__NL80211_IFTYPE_AFTER_LAST: internal use
  *
- * These values are used with the NL80211_ATTR_IFTYPE
+ * These values are used with the %NL80211_ATTR_IFTYPE
  * to set the type of an interface.
  *
  */
@@ -31,8 +122,8 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_MONITOR,
 
 	/* keep last */
-	__NL80211_IFTYPE_AFTER_LAST
+	__NL80211_IFTYPE_AFTER_LAST,
+	NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
 };
-#define NL80211_IFTYPE_MAX (__NL80211_IFTYPE_AFTER_LAST - 1)
 
 #endif /* __LINUX_NL80211_H */
diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h
index ce06188b7a5..bec4485e3d7 100644
--- a/include/linux/nsproxy.h
+++ b/include/linux/nsproxy.h
@@ -29,6 +29,7 @@ struct nsproxy {
 	struct mnt_namespace *mnt_ns;
 	struct pid_namespace *pid_ns;
 	struct user_namespace *user_ns;
+	struct net 	     *net_ns;
 };
 extern struct nsproxy init_nsproxy;
 
diff --git a/include/linux/of.h b/include/linux/of.h
index 47734ffd974..6df80e98591 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -54,7 +54,6 @@ extern int of_device_is_compatible(const struct device_node *device,
 extern const void *of_get_property(const struct device_node *node,
 				const char *name,
 				int *lenp);
-#define get_property(a, b, c)	of_get_property((a), (b), (c))
 extern int of_n_addr_cells(struct device_node *np);
 extern int of_n_size_cells(struct device_node *np);
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 038a0dc7273..768b93359f9 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -685,13 +685,16 @@ extern void pci_unblock_user_cfg_access(struct pci_dev *dev);
  * a PCI domain is defined to be a set of PCI busses which share
  * configuration space.
  */
-#ifndef CONFIG_PCI_DOMAINS
+#ifdef CONFIG_PCI_DOMAINS
+extern int pci_domains_supported;
+#else
+enum { pci_domains_supported = 0 };
 static inline int pci_domain_nr(struct pci_bus *bus) { return 0; }
 static inline int pci_proc_domain(struct pci_bus *bus)
 {
 	return 0;
 }
-#endif
+#endif /* CONFIG_PCI_DOMAINS */
 
 #else /* CONFIG_PCI is not enabled */
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 55f307ffbf9..87439ad9468 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -829,6 +829,9 @@
 #define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
 #define PCI_DEVICE_ID_UMC_UM8886A	0x886a
 
+#define PCI_VENDOR_ID_PICOPOWER		0x1066
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523	0x0002
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP	0x8002
 
 #define PCI_VENDOR_ID_MYLEX		0x1069
 #define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
@@ -1471,6 +1474,8 @@
 #define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
 #define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
 #define PCI_DEVICE_ID_RICOH_R5C822	0x0822
+#define PCI_DEVICE_ID_RICOH_R5C832	0x0832
+#define PCI_DEVICE_ID_RICOH_R5C843	0x0843
 
 #define PCI_VENDOR_ID_DLINK		0x1186
 #define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
@@ -1736,6 +1741,11 @@
 
 #define PCI_VENDOR_ID_RADISYS		0x1331
 
+#define PCI_VENDOR_ID_MICRO_MEMORY		0x1332
+#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN	0x5415
+#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN	0x5425
+#define PCI_DEVICE_ID_MICRO_MEMORY_6155		0x6155
+
 #define PCI_VENDOR_ID_DOMEX		0x134a
 #define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
 
@@ -1841,6 +1851,8 @@
 #define PCI_VENDOR_ID_ABOCOM		0x13D1
 #define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
 
+#define PCI_VENDOR_ID_SUNDANCE		0x13f0
+
 #define PCI_VENDOR_ID_CMEDIA		0x13f6
 #define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
 #define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
@@ -1948,8 +1960,12 @@
 #define PCI_DEVICE_ID_TIGON3_5751M	0x167d
 #define PCI_DEVICE_ID_TIGON3_5751F	0x167e
 #define PCI_DEVICE_ID_TIGON3_5787F	0x167f
+#define PCI_DEVICE_ID_TIGON3_5761E	0x1680
+#define PCI_DEVICE_ID_TIGON3_5761	0x1681
+#define PCI_DEVICE_ID_TIGON3_5764	0x1684
 #define PCI_DEVICE_ID_TIGON3_5787M	0x1693
 #define PCI_DEVICE_ID_TIGON3_5782	0x1696
+#define PCI_DEVICE_ID_TIGON3_5784	0x1698
 #define PCI_DEVICE_ID_TIGON3_5786	0x169a
 #define PCI_DEVICE_ID_TIGON3_5787	0x169b
 #define PCI_DEVICE_ID_TIGON3_5788	0x169c
@@ -2100,8 +2116,11 @@
 #define PCI_DEVICE_ID_MPC8533		0x0031
 #define PCI_DEVICE_ID_MPC8544E		0x0032
 #define PCI_DEVICE_ID_MPC8544		0x0033
+#define PCI_DEVICE_ID_MPC8572E		0x0040
+#define PCI_DEVICE_ID_MPC8572		0x0041
 #define PCI_DEVICE_ID_MPC8641		0x7010
 #define PCI_DEVICE_ID_MPC8641D		0x7011
+#define PCI_DEVICE_ID_MPC8610		0x7018
 
 #define PCI_VENDOR_ID_PASEMI		0x1959
 
@@ -2123,6 +2142,11 @@
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
 
+#define PCI_VENDOR_ID_TEHUTI		0x1fc9
+#define PCI_DEVICE_ID_TEHUTI_3009	0x3009
+#define PCI_DEVICE_ID_TEHUTI_3010	0x3010
+#define PCI_DEVICE_ID_TEHUTI_3014	0x3014
+
 #define PCI_VENDOR_ID_HINT             0x3388
 #define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
 
@@ -2221,6 +2245,7 @@
 #define PCI_DEVICE_ID_INTEL_82801EB_5	0x24d5
 #define PCI_DEVICE_ID_INTEL_82801EB_6	0x24d6
 #define PCI_DEVICE_ID_INTEL_82801EB_11	0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_12	0x24dc
 #define PCI_DEVICE_ID_INTEL_82801EB_13	0x24dd
 #define PCI_DEVICE_ID_INTEL_ESB_1	0x25a1
 #define PCI_DEVICE_ID_INTEL_ESB_2	0x25a2
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 495d368390e..c1914a8b94a 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -147,7 +147,7 @@
 #define PCI_BRIDGE_CONTROL	0x3e
 #define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
 #define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
-#define  PCI_BRIDGE_CTL_NO_ISA	0x04	/* Disable bridging of ISA ports */
+#define  PCI_BRIDGE_CTL_ISA	0x04	/* Enable ISA mode */
 #define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
 #define  PCI_BRIDGE_CTL_MASTER_ABORT	0x20  /* Report master aborts */
 #define  PCI_BRIDGE_CTL_BUS_RESET	0x40	/* Secondary bus reset */
@@ -202,8 +202,12 @@
 #define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
 #define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
 #define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
-#define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific capability */
+#define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific */
+#define  PCI_CAP_ID_DBG		0x0A	/* Debug port */
+#define  PCI_CAP_ID_CCRC	0x0B	/* CompactPCI Central Resource Control */
 #define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
+#define  PCI_CAP_ID_SSVID	0x0D	/* Bridge subsystem vendor/device ID */
+#define  PCI_CAP_ID_AGP3	0x0E	/* AGP Target PCI-PCI bridge */
 #define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */
 #define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
 #define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
@@ -316,7 +320,20 @@
 #define PCI_X_CMD		2	/* Modes & Features */
 #define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
 #define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
+#define  PCI_X_CMD_READ_512	0x0000	/* 512 byte maximum read byte count */
+#define  PCI_X_CMD_READ_1K	0x0004	/* 1Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_2K	0x0008	/* 2Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_4K	0x000c	/* 4Kbyte maximum read byte count */
 #define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
+				/* Max # of outstanding split transactions */
+#define  PCI_X_CMD_SPLIT_1	0x0000	/* Max 1 */
+#define  PCI_X_CMD_SPLIT_2	0x0010	/* Max 2 */
+#define  PCI_X_CMD_SPLIT_3	0x0020	/* Max 3 */
+#define  PCI_X_CMD_SPLIT_4	0x0030	/* Max 4 */
+#define  PCI_X_CMD_SPLIT_8	0x0040	/* Max 8 */
+#define  PCI_X_CMD_SPLIT_12	0x0050	/* Max 12 */
+#define  PCI_X_CMD_SPLIT_16	0x0060	/* Max 16 */
+#define  PCI_X_CMD_SPLIT_32	0x0070	/* Max 32 */
 #define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
 #define  PCI_X_CMD_VERSION(x) 	(((x) >> 12) & 3) /* Version */
 #define PCI_X_STATUS		4	/* PCI-X capabilities */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2a659789f9c..f0742b6aaa6 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -25,6 +25,8 @@
 #include <linux/timer.h>
 #include <linux/workqueue.h>
 
+#include <asm/atomic.h>
+
 #define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
 				 SUPPORTED_10baseT_Full | \
 				 SUPPORTED_100baseT_Half | \
@@ -281,6 +283,7 @@ struct phy_device {
 	/* Interrupt and Polling infrastructure */
 	struct work_struct phy_queue;
 	struct timer_list phy_timer;
+	atomic_t irq_disable;
 
 	spinlock_t lock;
 
diff --git a/include/linux/phy_fixed.h b/include/linux/phy_fixed.h
new file mode 100644
index 00000000000..04ba70d49fb
--- /dev/null
+++ b/include/linux/phy_fixed.h
@@ -0,0 +1,38 @@
+#ifndef __PHY_FIXED_H
+#define __PHY_FIXED_H
+
+#define MII_REGS_NUM	29
+
+/* max number of virtual phy stuff */
+#define MAX_PHY_AMNT	10
+/*
+    The idea is to emulate normal phy behavior by responding with
+    pre-defined values to mii BMCR read, so that read_status hook could
+    take all the needed info.
+*/
+
+struct fixed_phy_status {
+	u8 link;
+	u16 speed;
+	u8 duplex;
+};
+
+/*-----------------------------------------------------------------------------
+ *  Private information hoder for mii_bus
+ *-----------------------------------------------------------------------------*/
+struct fixed_info {
+	u16 *regs;
+	u8 regs_num;
+	struct fixed_phy_status phy_status;
+	struct phy_device *phydev;	/* pointer to the container */
+	/* link & speed cb */
+	int (*link_update) (struct net_device *, struct fixed_phy_status *);
+
+};
+
+
+int fixed_mdio_set_link_update(struct phy_device *,
+       int (*link_update) (struct net_device *, struct fixed_phy_status *));
+struct fixed_info *fixed_mdio_get_phydev (int phydev_ind);
+
+#endif /* __PHY_FIXED_H */
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index 268c51599eb..919af93b705 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -77,8 +77,8 @@ struct tc_ratespec
 {
 	unsigned char	cell_log;
 	unsigned char	__reserved;
-	unsigned short	feature;
-	short		addend;
+	unsigned short	overhead;
+	short		cell_align;
 	unsigned short	mpu;
 	__u32		rate;
 };
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 8bbd459eafd..e80804316cd 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -15,7 +15,7 @@
 
 struct platform_device {
 	const char	* name;
-	u32		id;
+	int		id;
 	struct device	dev;
 	u32		num_resources;
 	struct resource	* resource;
@@ -35,9 +35,10 @@ extern struct resource *platform_get_resource_byname(struct platform_device *, u
 extern int platform_get_irq_byname(struct platform_device *, char *);
 extern int platform_add_devices(struct platform_device **, int);
 
-extern struct platform_device *platform_device_register_simple(char *, unsigned int, struct resource *, unsigned int);
+extern struct platform_device *platform_device_register_simple(char *, int id,
+					struct resource *, unsigned int);
 
-extern struct platform_device *platform_device_alloc(const char *name, unsigned int id);
+extern struct platform_device *platform_device_alloc(const char *name, int id);
 extern int platform_device_add_resources(struct platform_device *pdev, struct resource *res, unsigned int num);
 extern int platform_device_add_data(struct platform_device *pdev, const void *data, size_t size);
 extern int platform_device_add(struct platform_device *pdev);
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index cd13a78c5db..20741f668f7 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -7,6 +7,7 @@
 #include <linux/magic.h>
 #include <asm/atomic.h>
 
+struct net;
 struct completion;
 
 /*
@@ -97,8 +98,6 @@ struct vmcore {
 
 extern struct proc_dir_entry proc_root;
 extern struct proc_dir_entry *proc_root_fs;
-extern struct proc_dir_entry *proc_net;
-extern struct proc_dir_entry *proc_net_stat;
 extern struct proc_dir_entry *proc_bus;
 extern struct proc_dir_entry *proc_root_driver;
 extern struct proc_dir_entry *proc_root_kcore;
@@ -192,36 +191,21 @@ static inline struct proc_dir_entry *create_proc_info_entry(const char *name,
 	if (res) res->get_info=get_info;
 	return res;
 }
- 
-static inline struct proc_dir_entry *proc_net_create(const char *name,
-	mode_t mode, get_info_t *get_info)
-{
-	return create_proc_info_entry(name,mode,proc_net,get_info);
-}
 
-static inline struct proc_dir_entry *proc_net_fops_create(const char *name,
-	mode_t mode, const struct file_operations *fops)
-{
-	struct proc_dir_entry *res = create_proc_entry(name, mode, proc_net);
-	if (res)
-		res->proc_fops = fops;
-	return res;
-}
-
-static inline void proc_net_remove(const char *name)
-{
-	remove_proc_entry(name,proc_net);
-}
+extern struct proc_dir_entry *proc_net_create(struct net *net,
+	const char *name, mode_t mode, get_info_t *get_info);
+extern struct proc_dir_entry *proc_net_fops_create(struct net *net,
+	const char *name, mode_t mode, const struct file_operations *fops);
+extern void proc_net_remove(struct net *net, const char *name);
 
 #else
 
 #define proc_root_driver NULL
-#define proc_net NULL
 #define proc_bus NULL
 
-#define proc_net_fops_create(name, mode, fops)  ({ (void)(mode), NULL; })
-#define proc_net_create(name, mode, info)	({ (void)(mode), NULL; })
-static inline void proc_net_remove(const char *name) {}
+#define proc_net_fops_create(net, name, mode, fops)  ({ (void)(mode), NULL; })
+#define proc_net_create(net, name, mode, info)	({ (void)(mode), NULL; })
+static inline void proc_net_remove(struct net *net, const char *name) {}
 
 static inline void proc_flush_task(struct task_struct *task) { }
 
@@ -281,6 +265,13 @@ static inline struct proc_dir_entry *PDE(const struct inode *inode)
 	return PROC_I(inode)->pde;
 }
 
+static inline struct net *PDE_NET(struct proc_dir_entry *pde)
+{
+	return pde->parent->data;
+}
+
+struct net *get_proc_net(const struct inode *inode);
+
 struct proc_maps_private {
 	struct pid *pid;
 	struct task_struct *task;
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index a8a6ea809da..0ce5e0b52db 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -2,7 +2,7 @@
 #define __RFKILL_H
 
 /*
- * Copyright (C) 2006 Ivo van Doorn
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
  * Copyright (C) 2007 Dmitry Torokhov
  *
  * This program is free software; you can redistribute it and/or modify
@@ -26,18 +26,19 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
+#include <linux/leds.h>
 
 /**
  * enum rfkill_type - type of rfkill switch.
- * RFKILL_TYPE_WLAN: switch is no a Wireless network devices.
- * RFKILL_TYPE_BlUETOOTH: switch is on a bluetooth device.
- * RFKILL_TYPE_IRDA: switch is on an infrared devices.
+ * RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * RFKILL_TYPE_UWB: switch is on a ultra wideband device.
  */
 enum rfkill_type {
-	RFKILL_TYPE_WLAN = 0,
-	RFKILL_TYPE_BLUETOOTH = 1,
-	RFKILL_TYPE_IRDA = 2,
-	RFKILL_TYPE_MAX = 3,
+	RFKILL_TYPE_WLAN ,
+	RFKILL_TYPE_BLUETOOTH,
+	RFKILL_TYPE_UWB,
+	RFKILL_TYPE_MAX,
 };
 
 enum rfkill_state {
@@ -51,11 +52,14 @@ enum rfkill_state {
  * @type: Radio type which the button controls, the value stored
  *	here should be a value from enum rfkill_type.
  * @state: State of the switch (on/off).
+ * @user_claim_unsupported: Whether the hardware supports exclusive
+ *	RF-kill control by userspace. Set this before registering.
  * @user_claim: Set when the switch is controlled exlusively by userspace.
  * @mutex: Guards switch state transitions
  * @data: Pointer to the RF button drivers private data which will be
  *	passed along when toggling radio state.
  * @toggle_radio(): Mandatory handler to control state of the radio.
+ * @led_trigger: A LED trigger for this button's LED.
  * @dev: Device structure integrating the switch into device tree.
  * @node: Used to place switch into list of all switches known to the
  *	the system.
@@ -67,6 +71,7 @@ struct rfkill {
 	enum rfkill_type type;
 
 	enum rfkill_state state;
+	bool user_claim_unsupported;
 	bool user_claim;
 
 	struct mutex mutex;
@@ -74,6 +79,10 @@ struct rfkill {
 	void *data;
 	int (*toggle_radio)(void *data, enum rfkill_state state);
 
+#ifdef CONFIG_RFKILL_LEDS
+	struct led_trigger led_trigger;
+#endif
+
 	struct device dev;
 	struct list_head node;
 };
@@ -84,6 +93,19 @@ void rfkill_free(struct rfkill *rfkill);
 int rfkill_register(struct rfkill *rfkill);
 void rfkill_unregister(struct rfkill *rfkill);
 
-void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state);
+/**
+ * rfkill_get_led_name - Get the LED trigger name for the button's LED.
+ * This function might return a NULL pointer if registering of the
+ * LED trigger failed.
+ * Use this as "default_trigger" for the LED.
+ */
+static inline char *rfkill_get_led_name(struct rfkill *rfkill)
+{
+#ifdef CONFIG_RFKILL_LEDS
+	return (char *)(rfkill->led_trigger.name);
+#else
+	return NULL;
+#endif
+}
 
 #endif /* RFKILL_H */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index dff3192374f..5bf618241ab 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -97,6 +97,9 @@ enum {
 	RTM_SETNEIGHTBL,
 #define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
 
+	RTM_NEWNDUSEROPT = 68,
+#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
+
 	__RTM_MAX,
 #define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
 };
@@ -479,6 +482,30 @@ enum
 #define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
 #define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
 
+/********************************************************************
+ *		Neighbor Discovery userland options
+ ****/
+
+struct nduseroptmsg
+{
+	unsigned char	nduseropt_family;
+	unsigned char	nduseropt_pad1;
+	unsigned short	nduseropt_opts_len;	/* Total length of options */
+	__u8		nduseropt_icmp_type;
+	__u8		nduseropt_icmp_code;
+	unsigned short	nduseropt_pad2;
+	/* Followed by one or more ND options */
+};
+
+enum
+{
+	NDUSEROPT_UNSPEC,
+	NDUSEROPT_SRCADDR,
+	__NDUSEROPT_MAX
+};
+
+#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
+
 #ifndef __KERNEL__
 /* RTnetlink multicast groups - backwards compatibility for userspace */
 #define RTMGRP_LINK		1
@@ -542,6 +569,8 @@ enum rtnetlink_groups {
 #define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
 	RTNLGRP_IPV6_RULE,
 #define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
+	RTNLGRP_ND_USEROPT,
+#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
 	__RTNLGRP_MAX
 };
 #define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 313c6b6e774..833f7dc2b8d 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -27,6 +27,7 @@
 #define CLONE_NEWUTS		0x04000000	/* New utsname group? */
 #define CLONE_NEWIPC		0x08000000	/* New ipcs */
 #define CLONE_NEWUSER		0x10000000	/* New user namespace */
+#define CLONE_NEWNET		0x40000000	/* New network namespace */
 
 /*
  * Scheduling policies
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index d70df61a029..5eb38cc0e5a 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -102,6 +102,9 @@ typedef enum {
         SCTP_CID_ECN_CWR		= 13,
         SCTP_CID_SHUTDOWN_COMPLETE	= 14,
 
+	/* AUTH Extension Section 4.1 */
+	SCTP_CID_AUTH			= 0x0F,
+
 	/* PR-SCTP Sec 3.2 */
 	SCTP_CID_FWD_TSN		= 0xC0,
 
@@ -180,6 +183,14 @@ typedef enum {
 	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= __constant_htons(12),
 	SCTP_PARAM_ECN_CAPABLE			= __constant_htons(0x8000),
 
+	/* AUTH Extension Section 3 */
+	SCTP_PARAM_RANDOM			= __constant_htons(0x8002),
+	SCTP_PARAM_CHUNKS			= __constant_htons(0x8003),
+	SCTP_PARAM_HMAC_ALGO			= __constant_htons(0x8004),
+
+	/* Add-IP: Supported Extensions, Section 4.2 */
+	SCTP_PARAM_SUPPORTED_EXT	= __constant_htons(0x8008),
+
 	/* PR-SCTP Sec 3.1 */
 	SCTP_PARAM_FWD_TSN_SUPPORT	= __constant_htons(0xc000),
 
@@ -296,6 +307,30 @@ typedef struct sctp_adaptation_ind_param {
 	__be32 adaptation_ind;
 } __attribute__((packed)) sctp_adaptation_ind_param_t;
 
+/* ADDIP Section 4.2.7 Supported Extensions Parameter */
+typedef struct sctp_supported_ext_param {
+	struct sctp_paramhdr param_hdr;
+	__u8 chunks[0];
+} __attribute__((packed)) sctp_supported_ext_param_t;
+
+/* AUTH Section 3.1 Random */
+typedef struct sctp_random_param {
+	sctp_paramhdr_t param_hdr;
+	__u8 random_val[0];
+} __attribute__((packed)) sctp_random_param_t;
+
+/* AUTH Section 3.2 Chunk List */
+typedef struct sctp_chunks_param {
+	sctp_paramhdr_t param_hdr;
+	__u8 chunks[0];
+} __attribute__((packed)) sctp_chunks_param_t;
+
+/* AUTH Section 3.3 HMAC Algorithm */
+typedef struct sctp_hmac_algo_param {
+	sctp_paramhdr_t param_hdr;
+	__be16 hmac_ids[0];
+} __attribute__((packed)) sctp_hmac_algo_param_t;
+
 /* RFC 2960.  Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2):
  *   The INIT ACK chunk is used to acknowledge the initiation of an SCTP
  *   association.
@@ -462,7 +497,19 @@ typedef enum {
 	SCTP_ERROR_RSRC_LOW	= __constant_htons(0x0101),
 	SCTP_ERROR_DEL_SRC_IP	= __constant_htons(0x0102),
 	SCTP_ERROR_ASCONF_ACK   = __constant_htons(0x0103),
-	SCTP_ERROR_REQ_REFUSED	= __constant_htons(0x0104)
+	SCTP_ERROR_REQ_REFUSED	= __constant_htons(0x0104),
+
+	/* AUTH Section 4.  New Error Cause
+	 *
+	 * This section defines a new error cause that will be sent if an AUTH
+	 * chunk is received with an unsupported HMAC identifier.
+	 * illustrates the new error cause.
+	 *
+	 * Cause Code      Error Cause Name
+	 * --------------------------------------------------------------
+	 * 0x0105          Unsupported HMAC Identifier
+	 */
+	 SCTP_ERROR_UNSUP_HMAC	= __constant_htons(0x0105)
 } sctp_error_t;
 
 
@@ -600,4 +647,64 @@ typedef struct sctp_addip_chunk {
 	sctp_addiphdr_t addip_hdr;
 } __attribute__((packed)) sctp_addip_chunk_t;
 
+/* AUTH
+ * Section 4.1  Authentication Chunk (AUTH)
+ *
+ *   This chunk is used to hold the result of the HMAC calculation.
+ *
+ *    0                   1                   2                   3
+ *    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   | Type = 0x0F   |   Flags=0     |             Length            |
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   |     Shared Key Identifier     |   HMAC Identifier             |
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   |                                                               |
+ *   \                             HMAC                              /
+ *   /                                                               \
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *   Type: 1 byte (unsigned integer)
+ *   	This value MUST be set to 0x0F for  all AUTH-chunks.
+ *
+ *   Flags: 1 byte (unsigned integer)
+ *	Set to zero on transmit and ignored on receipt.
+ *
+ *   Length: 2 bytes (unsigned integer)
+ *   	This value holds the length of the HMAC in bytes plus 8.
+ *
+ *  Shared Key Identifier: 2 bytes (unsigned integer)
+ *	This value describes which endpoint pair shared key is used.
+ *
+ *   HMAC Identifier: 2 bytes (unsigned integer)
+ *   	This value describes which message digest is being used.  Table 2
+ *	shows the currently defined values.
+ *
+ *    The following Table 2 shows the currently defined values for HMAC
+ *       identifiers.
+ *
+ *	 +-----------------+--------------------------+
+ *	 | HMAC Identifier | Message Digest Algorithm |
+ *	 +-----------------+--------------------------+
+ *	 | 0               | Reserved                 |
+ *	 | 1               | SHA-1 defined in [8]     |
+ *	 | 2               | Reserved                 |
+ *	 | 3               | SHA-256 defined in [8]   |
+ *	 +-----------------+--------------------------+
+ *
+ *
+ *   HMAC: n bytes (unsigned integer) This hold the result of the HMAC
+ *      calculation.
+ */
+typedef struct sctp_authhdr {
+	__be16 shkey_id;
+	__be16 hmac_id;
+	__u8   hmac[0];
+} __attribute__((packed)) sctp_authhdr_t;
+
+typedef struct sctp_auth_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_authhdr_t auth_hdr;
+} __attribute__((packed)) sctp_auth_chunk_t;
+
 #endif /* __LINUX_SCTP_H__ */
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index 83783ab0f55..8bf1e05115b 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -46,6 +46,8 @@ int seq_path(struct seq_file *, struct vfsmount *, struct dentry *, char *);
 
 int single_open(struct file *, int (*)(struct seq_file *, void *), void *);
 int single_release(struct inode *, struct file *);
+void *__seq_open_private(struct file *, const struct seq_operations *, int);
+int seq_open_private(struct file *, const struct seq_operations *, int);
 int seq_release_private(struct inode *, struct file *);
 
 #define SEQ_START_TOKEN ((void *)1)
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 802b3a38b04..89f0c2b5f40 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -82,6 +82,8 @@ enum
 	__ICMP_MIB_MAX
 };
 
+#define __ICMPMSG_MIB_MAX 512	/* Out+In for all 8-bit ICMP types */
+
 /* icmp6 mib definitions */
 /*
  * RFC 2466:  ICMPv6-MIB
@@ -91,35 +93,12 @@ enum
 	ICMP6_MIB_NUM = 0,
 	ICMP6_MIB_INMSGS,			/* InMsgs */
 	ICMP6_MIB_INERRORS,			/* InErrors */
-	ICMP6_MIB_INDESTUNREACHS,		/* InDestUnreachs */
-	ICMP6_MIB_INPKTTOOBIGS,			/* InPktTooBigs */
-	ICMP6_MIB_INTIMEEXCDS,			/* InTimeExcds */
-	ICMP6_MIB_INPARMPROBLEMS,		/* InParmProblems */
-	ICMP6_MIB_INECHOS,			/* InEchos */
-	ICMP6_MIB_INECHOREPLIES,		/* InEchoReplies */
-	ICMP6_MIB_INGROUPMEMBQUERIES,		/* InGroupMembQueries */
-	ICMP6_MIB_INGROUPMEMBRESPONSES,		/* InGroupMembResponses */
-	ICMP6_MIB_INGROUPMEMBREDUCTIONS,	/* InGroupMembReductions */
-	ICMP6_MIB_INROUTERSOLICITS,		/* InRouterSolicits */
-	ICMP6_MIB_INROUTERADVERTISEMENTS,	/* InRouterAdvertisements */
-	ICMP6_MIB_INNEIGHBORSOLICITS,		/* InNeighborSolicits */
-	ICMP6_MIB_INNEIGHBORADVERTISEMENTS,	/* InNeighborAdvertisements */
-	ICMP6_MIB_INREDIRECTS,			/* InRedirects */
 	ICMP6_MIB_OUTMSGS,			/* OutMsgs */
-	ICMP6_MIB_OUTDESTUNREACHS,		/* OutDestUnreachs */
-	ICMP6_MIB_OUTPKTTOOBIGS,		/* OutPktTooBigs */
-	ICMP6_MIB_OUTTIMEEXCDS,			/* OutTimeExcds */
-	ICMP6_MIB_OUTPARMPROBLEMS,		/* OutParmProblems */
-	ICMP6_MIB_OUTECHOREPLIES,		/* OutEchoReplies */
-	ICMP6_MIB_OUTROUTERSOLICITS,		/* OutRouterSolicits */
-	ICMP6_MIB_OUTNEIGHBORSOLICITS,		/* OutNeighborSolicits */
-	ICMP6_MIB_OUTNEIGHBORADVERTISEMENTS,	/* OutNeighborAdvertisements */
-	ICMP6_MIB_OUTREDIRECTS,			/* OutRedirects */
-	ICMP6_MIB_OUTGROUPMEMBRESPONSES,	/* OutGroupMembResponses */
-	ICMP6_MIB_OUTGROUPMEMBREDUCTIONS,	/* OutGroupMembReductions */
 	__ICMP6_MIB_MAX
 };
 
+#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */
+
 /* tcp mib definitions */
 /*
  * RFC 1213:  MIB-II TCP group
@@ -231,6 +210,10 @@ enum
 	LINUX_MIB_TCPABORTONLINGER,		/* TCPAbortOnLinger */
 	LINUX_MIB_TCPABORTFAILED,		/* TCPAbortFailed */
 	LINUX_MIB_TCPMEMORYPRESSURES,		/* TCPMemoryPressures */
+	LINUX_MIB_TCPSACKDISCARD,		/* TCPSACKDiscard */
+	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
+	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
+	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
new file mode 100644
index 00000000000..e9bbe3ebd72
--- /dev/null
+++ b/include/linux/spi/mmc_spi.h
@@ -0,0 +1,33 @@
+#ifndef __LINUX_SPI_MMC_SPI_H
+#define __LINUX_SPI_MMC_SPI_H
+
+struct device;
+struct mmc_host;
+
+/* Put this in platform_data of a device being used to manage an MMC/SD
+ * card slot.  (Modeled after PXA mmc glue; see that for usage examples.)
+ *
+ * REVISIT This is not a spi-specific notion.  Any card slot should be
+ * able to handle it.  If the MMC core doesn't adopt this kind of notion,
+ * switch the "struct device *" parameters over to "struct spi_device *".
+ */
+struct mmc_spi_platform_data {
+	/* driver activation and (optional) card detect irq hookup */
+	int (*init)(struct device *,
+		irqreturn_t (*)(int, void *),
+		void *);
+	void (*exit)(struct device *, void *);
+
+	/* sense switch on sd cards */
+	int (*get_ro)(struct device *);
+
+	/* how long to debounce card detect, in msecs */
+	u16 detect_delay;
+
+	/* power management */
+	u16 powerup_msecs;		/* delay of up to 250 msec */
+	u32 ocr_mask;			/* available voltages */
+	void (*setpower)(struct device *, unsigned int maskval);
+};
+
+#endif /* __LINUX_SPI_MMC_SPI_H */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
new file mode 100644
index 00000000000..2b5c312c496
--- /dev/null
+++ b/include/linux/ssb/ssb.h
@@ -0,0 +1,424 @@
+#ifndef LINUX_SSB_H_
+#define LINUX_SSB_H_
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/ssb/ssb_regs.h>
+
+
+struct pcmcia_device;
+struct ssb_bus;
+struct ssb_driver;
+
+
+struct ssb_sprom_r1 {
+	u16 pci_spid;		/* Subsystem Product ID for PCI */
+	u16 pci_svid;		/* Subsystem Vendor ID for PCI */
+	u16 pci_pid;		/* Product ID for PCI */
+	u8 il0mac[6];		/* MAC address for 802.11b/g */
+	u8 et0mac[6];		/* MAC address for Ethernet */
+	u8 et1mac[6];		/* MAC address for 802.11a */
+	u8 et0phyaddr:5;	/* MII address for enet0 */
+	u8 et1phyaddr:5;	/* MII address for enet1 */
+	u8 et0mdcport:1;	/* MDIO for enet0 */
+	u8 et1mdcport:1;	/* MDIO for enet1 */
+	u8 board_rev;		/* Board revision */
+	u8 country_code:4;	/* Country Code */
+	u8 antenna_a:2;		/* Antenna 0/1 available for A-PHY */
+	u8 antenna_bg:2;	/* Antenna 0/1 available for B-PHY and G-PHY */
+	u16 pa0b0;
+	u16 pa0b1;
+	u16 pa0b2;
+	u16 pa1b0;
+	u16 pa1b1;
+	u16 pa1b2;
+	u8 gpio0;		/* GPIO pin 0 */
+	u8 gpio1;		/* GPIO pin 1 */
+	u8 gpio2;		/* GPIO pin 2 */
+	u8 gpio3;		/* GPIO pin 3 */
+	u16 maxpwr_a;		/* A-PHY Power Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_bg;		/* B/G-PHY Power Amplifier Max Power (in dBm Q5.2) */
+	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
+	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
+	u16 boardflags_lo;	/* Boardflags (low 16 bits) */
+	u8 antenna_gain_a;	/* A-PHY Antenna gain (in dBm Q5.2) */
+	u8 antenna_gain_bg;	/* B/G-PHY Antenna gain (in dBm Q5.2) */
+	u8 oem[8];		/* OEM string (rev 1 only) */
+};
+
+struct ssb_sprom_r2 {
+	u16 boardflags_hi;	/* Boardflags (high 16 bits) */
+	u8 maxpwr_a_lo;		/* A-PHY Max Power Low */
+	u8 maxpwr_a_hi;		/* A-PHY Max Power High */
+	u16 pa1lob0;		/* A-PHY PA Low Settings */
+	u16 pa1lob1;		/* A-PHY PA Low Settings */
+	u16 pa1lob2;		/* A-PHY PA Low Settings */
+	u16 pa1hib0;		/* A-PHY PA High Settings */
+	u16 pa1hib1;		/* A-PHY PA High Settings */
+	u16 pa1hib2;		/* A-PHY PA High Settings */
+	u8 ofdm_pwr_off;	/* OFDM Power Offset from CCK Level */
+	u8 country_str[2];	/* Two char Country Code */
+};
+
+struct ssb_sprom_r3 {
+	u32 ofdmapo;		/* A-PHY OFDM Mid Power Offset */
+	u32 ofdmalpo;		/* A-PHY OFDM Low Power Offset */
+	u32 ofdmahpo;		/* A-PHY OFDM High Power Offset */
+	u8 gpioldc_on_cnt;	/* GPIO LED Powersave Duty Cycle ON count */
+	u8 gpioldc_off_cnt;	/* GPIO LED Powersave Duty Cycle OFF count */
+	u8 cckpo_1M:4;		/* CCK Power Offset for Rate 1M */
+	u8 cckpo_2M:4;		/* CCK Power Offset for Rate 2M */
+	u8 cckpo_55M:4;		/* CCK Power Offset for Rate 5.5M */
+	u8 cckpo_11M:4;		/* CCK Power Offset for Rate 11M */
+	u32 ofdmgpo;		/* G-PHY OFDM Power Offset */
+};
+
+struct ssb_sprom_r4 {
+	/* TODO */
+};
+
+struct ssb_sprom {
+	u8 revision;
+	u8 crc;
+	/* The valid r# fields are selected by the "revision".
+	 * Revision 3 and lower inherit from lower revisions.
+	 */
+	union {
+		struct {
+			struct ssb_sprom_r1 r1;
+			struct ssb_sprom_r2 r2;
+			struct ssb_sprom_r3 r3;
+		};
+		struct ssb_sprom_r4 r4;
+	};
+};
+
+/* Information about the PCB the circuitry is soldered on. */
+struct ssb_boardinfo {
+	u16 vendor;
+	u16 type;
+	u16 rev;
+};
+
+
+struct ssb_device;
+/* Lowlevel read/write operations on the device MMIO.
+ * Internal, don't use that outside of ssb. */
+struct ssb_bus_ops {
+	u16 (*read16)(struct ssb_device *dev, u16 offset);
+	u32 (*read32)(struct ssb_device *dev, u16 offset);
+	void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
+	void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
+};
+
+
+/* Core-ID values. */
+#define SSB_DEV_CHIPCOMMON	0x800
+#define SSB_DEV_ILINE20		0x801
+#define SSB_DEV_SDRAM		0x803
+#define SSB_DEV_PCI		0x804
+#define SSB_DEV_MIPS		0x805
+#define SSB_DEV_ETHERNET	0x806
+#define SSB_DEV_V90		0x807
+#define SSB_DEV_USB11_HOSTDEV	0x808
+#define SSB_DEV_ADSL		0x809
+#define SSB_DEV_ILINE100	0x80A
+#define SSB_DEV_IPSEC		0x80B
+#define SSB_DEV_PCMCIA		0x80D
+#define SSB_DEV_INTERNAL_MEM	0x80E
+#define SSB_DEV_MEMC_SDRAM	0x80F
+#define SSB_DEV_EXTIF		0x811
+#define SSB_DEV_80211		0x812
+#define SSB_DEV_MIPS_3302	0x816
+#define SSB_DEV_USB11_HOST	0x817
+#define SSB_DEV_USB11_DEV	0x818
+#define SSB_DEV_USB20_HOST	0x819
+#define SSB_DEV_USB20_DEV	0x81A
+#define SSB_DEV_SDIO_HOST	0x81B
+#define SSB_DEV_ROBOSWITCH	0x81C
+#define SSB_DEV_PARA_ATA	0x81D
+#define SSB_DEV_SATA_XORDMA	0x81E
+#define SSB_DEV_ETHERNET_GBIT	0x81F
+#define SSB_DEV_PCIE		0x820
+#define SSB_DEV_MIMO_PHY	0x821
+#define SSB_DEV_SRAM_CTRLR	0x822
+#define SSB_DEV_MINI_MACPHY	0x823
+#define SSB_DEV_ARM_1176	0x824
+#define SSB_DEV_ARM_7TDMI	0x825
+
+/* Vendor-ID values */
+#define SSB_VENDOR_BROADCOM	0x4243
+
+/* Some kernel subsystems poke with dev->drvdata, so we must use the
+ * following ugly workaround to get from struct device to struct ssb_device */
+struct __ssb_dev_wrapper {
+	struct device dev;
+	struct ssb_device *sdev;
+};
+
+struct ssb_device {
+	/* Having a copy of the ops pointer in each dev struct
+	 * is an optimization. */
+	const struct ssb_bus_ops *ops;
+
+	struct device *dev;
+	struct ssb_bus *bus;
+	struct ssb_device_id id;
+
+	u8 core_index;
+	unsigned int irq;
+
+	/* Internal-only stuff follows. */
+	void *drvdata;		/* Per-device data */
+	void *devtypedata;	/* Per-devicetype (eg 802.11) data */
+};
+
+/* Go from struct device to struct ssb_device. */
+static inline
+struct ssb_device * dev_to_ssb_dev(struct device *dev)
+{
+	struct __ssb_dev_wrapper *wrap;
+	wrap = container_of(dev, struct __ssb_dev_wrapper, dev);
+	return wrap->sdev;
+}
+
+/* Device specific user data */
+static inline
+void ssb_set_drvdata(struct ssb_device *dev, void *data)
+{
+	dev->drvdata = data;
+}
+static inline
+void * ssb_get_drvdata(struct ssb_device *dev)
+{
+	return dev->drvdata;
+}
+
+/* Devicetype specific user data. This is per device-type (not per device) */
+void ssb_set_devtypedata(struct ssb_device *dev, void *data);
+static inline
+void * ssb_get_devtypedata(struct ssb_device *dev)
+{
+	return dev->devtypedata;
+}
+
+
+struct ssb_driver {
+	const char *name;
+	const struct ssb_device_id *id_table;
+
+	int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id);
+	void (*remove)(struct ssb_device *dev);
+	int (*suspend)(struct ssb_device *dev, pm_message_t state);
+	int (*resume)(struct ssb_device *dev);
+	void (*shutdown)(struct ssb_device *dev);
+
+	struct device_driver drv;
+};
+#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+
+extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+static inline int ssb_driver_register(struct ssb_driver *drv)
+{
+	return __ssb_driver_register(drv, THIS_MODULE);
+}
+extern void ssb_driver_unregister(struct ssb_driver *drv);
+
+
+
+
+enum ssb_bustype {
+	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
+	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
+	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
+};
+
+/* board_vendor */
+#define SSB_BOARDVENDOR_BCM	0x14E4	/* Broadcom */
+#define SSB_BOARDVENDOR_DELL	0x1028	/* Dell */
+#define SSB_BOARDVENDOR_HP	0x0E11	/* HP */
+/* board_type */
+#define SSB_BOARD_BCM94306MP	0x0418
+#define SSB_BOARD_BCM4309G	0x0421
+#define SSB_BOARD_BCM4306CB	0x0417
+#define SSB_BOARD_BCM4309MP	0x040C
+#define SSB_BOARD_MP4318	0x044A
+#define SSB_BOARD_BU4306	0x0416
+#define SSB_BOARD_BU4309	0x040A
+/* chip_package */
+#define SSB_CHIPPACK_BCM4712S	1	/* Small 200pin 4712 */
+#define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
+#define SSB_CHIPPACK_BCM4712L	0	/* Large 340pin 4712 */
+
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_driver_mips.h>
+#include <linux/ssb/ssb_driver_extif.h>
+#include <linux/ssb/ssb_driver_pci.h>
+
+struct ssb_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct ssb_bus_ops *ops;
+
+	/* The core in the basic address register window. (PCI bus only) */
+	struct ssb_device *mapped_device;
+	/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+	u8 mapped_pcmcia_seg;
+	/* Lock for core and segment switching. */
+	spinlock_t bar_lock;
+
+	/* The bus this backplane is running on. */
+	enum ssb_bustype bustype;
+	/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+	struct pci_dev *host_pci;
+	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+	struct pcmcia_device *host_pcmcia;
+
+#ifdef CONFIG_SSB_PCIHOST
+	/* Mutex to protect the SPROM writing. */
+	struct mutex pci_sprom_mutex;
+#endif
+
+	/* ID information about the Chip. */
+	u16 chip_id;
+	u16 chip_rev;
+	u8 chip_package;
+
+	/* List of devices (cores) on the backplane. */
+	struct ssb_device devices[SSB_MAX_NR_CORES];
+	u8 nr_devices;
+
+	/* Reference count. Number of suspended devices. */
+	u8 suspend_cnt;
+
+	/* Software ID number for this bus. */
+	unsigned int busnumber;
+
+	/* The ChipCommon device (if available). */
+	struct ssb_chipcommon chipco;
+	/* The PCI-core device (if available). */
+	struct ssb_pcicore pcicore;
+	/* The MIPS-core device (if available). */
+	struct ssb_mipscore mipscore;
+	/* The EXTif-core device (if available). */
+	struct ssb_extif extif;
+
+	/* The following structure elements are not available in early
+	 * SSB initialization. Though, they are available for regular
+	 * registered drivers at any stage. So be careful when
+	 * using them in the ssb core code. */
+
+	/* ID information about the PCB. */
+	struct ssb_boardinfo boardinfo;
+	/* Contents of the SPROM. */
+	struct ssb_sprom sprom;
+
+	/* Internal-only stuff follows. Do not touch. */
+	struct list_head list;
+#ifdef CONFIG_SSB_DEBUG
+	/* Is the bus already powered up? */
+	bool powered_up;
+	int power_warn_count;
+#endif /* DEBUG */
+};
+
+/* The initialization-invariants. */
+struct ssb_init_invariants {
+	struct ssb_boardinfo boardinfo;
+	struct ssb_sprom sprom;
+};
+/* Type of function to fetch the invariants. */
+typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
+				     struct ssb_init_invariants *iv);
+
+/* Register a SSB system bus. get_invariants() is called after the
+ * basic system devices are initialized.
+ * The invariants are usually fetched from some NVRAM.
+ * Put the invariants into the struct pointed to by iv. */
+extern int ssb_bus_ssbbus_register(struct ssb_bus *bus,
+				   unsigned long baseaddr,
+				   ssb_invariants_func_t get_invariants);
+#ifdef CONFIG_SSB_PCIHOST
+extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
+				   struct pci_dev *host_pci);
+#endif /* CONFIG_SSB_PCIHOST */
+#ifdef CONFIG_SSB_PCMCIAHOST
+extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+				      struct pcmcia_device *pcmcia_dev,
+				      unsigned long baseaddr);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
+extern void ssb_bus_unregister(struct ssb_bus *bus);
+
+extern u32 ssb_clockspeed(struct ssb_bus *bus);
+
+/* Is the device enabled in hardware? */
+int ssb_device_is_enabled(struct ssb_device *dev);
+/* Enable a device and pass device-specific SSB_TMSLOW flags.
+ * If no device-specific flags are available, use 0. */
+void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);
+/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */
+void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
+
+
+/* Device MMIO register read/write functions. */
+static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read16(dev, offset);
+}
+static inline u32 ssb_read32(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read32(dev, offset);
+}
+static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+	dev->ops->write16(dev, offset, value);
+}
+static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+	dev->ops->write32(dev, offset, value);
+}
+
+
+/* Translation (routing) bits that need to be ORed to DMA
+ * addresses before they are given to a device. */
+extern u32 ssb_dma_translation(struct ssb_device *dev);
+#define SSB_DMA_TRANSLATION_MASK	0xC0000000
+#define SSB_DMA_TRANSLATION_SHIFT	30
+
+extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask);
+
+
+#ifdef CONFIG_SSB_PCIHOST
+/* PCI-host wrapper driver */
+extern int ssb_pcihost_register(struct pci_driver *driver);
+static inline void ssb_pcihost_unregister(struct pci_driver *driver)
+{
+	pci_unregister_driver(driver);
+}
+#endif /* CONFIG_SSB_PCIHOST */
+
+
+/* If a driver is shutdown or suspended, call this to signal
+ * that the bus may be completely powered down. SSB will decide,
+ * if it's really time to power down the bus, based on if there
+ * are other devices that want to run. */
+extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
+/* Before initializing and enabling a device, call this to power-up the bus.
+ * If you want to allow use of dynamic-power-control, pass the flag.
+ * Otherwise static always-on powercontrol will be used. */
+extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+
+
+/* Various helper functions */
+extern u32 ssb_admatch_base(u32 adm);
+extern u32 ssb_admatch_size(u32 adm);
+
+
+#endif /* LINUX_SSB_H_ */
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
new file mode 100644
index 00000000000..4cb99549466
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -0,0 +1,396 @@
+#ifndef LINUX_SSB_CHIPCO_H_
+#define LINUX_SSB_CHIPCO_H_
+
+/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions
+ *
+ * The chipcommon core provides chip identification, SB control,
+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+
+/** ChipCommon core registers. **/
+
+#define SSB_CHIPCO_CHIPID		0x0000
+#define  SSB_CHIPCO_IDMASK		0x0000FFFF
+#define  SSB_CHIPCO_REVMASK		0x000F0000
+#define  SSB_CHIPCO_REVSHIFT		16
+#define  SSB_CHIPCO_PACKMASK		0x00F00000
+#define  SSB_CHIPCO_PACKSHIFT		20
+#define  SSB_CHIPCO_NRCORESMASK		0x0F000000
+#define  SSB_CHIPCO_NRCORESSHIFT	24
+#define SSB_CHIPCO_CAP	 		0x0004		/* Capabilities */
+#define  SSB_CHIPCO_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  SSB_CHIPCO_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  SSB_CHIPCO_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   SSB_CHIPCO_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  SSB_CHIPCO_CAP_UARTGPIO	0x00000020	/* UARTs on GPIO 15-12 */
+#define  SSB_CHIPCO_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  SSB_CHIPCO_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   SSB_CHIPCO_FLASHT_NONE	0x00000000	/* No flash */
+#define   SSB_CHIPCO_FLASHT_STSER	0x00000100	/* ST serial flash */
+#define   SSB_CHIPCO_FLASHT_ATSER	0x00000200	/* Atmel serial flash */
+#define	  SSB_CHIPCO_FLASHT_PARA	0x00000700	/* Parallel flash */
+#define  SSB_CHIPCO_CAP_PLLT		0x00038000	/* PLL Type */
+#define   SSB_PLLTYPE_NONE		0x00000000
+#define   SSB_PLLTYPE_1			0x00010000	/* 48Mhz base, 3 dividers */
+#define   SSB_PLLTYPE_2			0x00020000	/* 48Mhz, 4 dividers */
+#define   SSB_PLLTYPE_3			0x00030000	/* 25Mhz, 2 dividers */
+#define   SSB_PLLTYPE_4			0x00008000	/* 48Mhz, 4 dividers */
+#define   SSB_PLLTYPE_5			0x00018000	/* 25Mhz, 4 dividers */
+#define   SSB_PLLTYPE_6			0x00028000	/* 100/200 or 120/240 only */
+#define   SSB_PLLTYPE_7			0x00038000	/* 25Mhz, 4 dividers */
+#define  SSB_CHIPCO_CAP_PCTL		0x00040000	/* Power Control */
+#define  SSB_CHIPCO_CAP_OTPS		0x00380000	/* OTP size */
+#define  SSB_CHIPCO_CAP_OTPS_SHIFT	19
+#define  SSB_CHIPCO_CAP_OTPS_BASE	5
+#define  SSB_CHIPCO_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  SSB_CHIPCO_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define SSB_CHIPCO_CORECTL		0x0008
+#define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define SSB_CHIPCO_BIST			0x000C
+#define SSB_CHIPCO_OTPS			0x0010		/* OTP status */
+#define	 SSB_CHIPCO_OTPS_PROGFAIL	0x80000000
+#define	 SSB_CHIPCO_OTPS_PROTECT	0x00000007
+#define	 SSB_CHIPCO_OTPS_HW_PROTECT	0x00000001
+#define	 SSB_CHIPCO_OTPS_SW_PROTECT	0x00000002
+#define	 SSB_CHIPCO_OTPS_CID_PROTECT	0x00000004
+#define SSB_CHIPCO_OTPC			0x0014		/* OTP control */
+#define	 SSB_CHIPCO_OTPC_RECWAIT	0xFF000000
+#define	 SSB_CHIPCO_OTPC_PROGWAIT	0x00FFFF00
+#define	 SSB_CHIPCO_OTPC_PRW_SHIFT	8
+#define	 SSB_CHIPCO_OTPC_MAXFAIL	0x00000038
+#define	 SSB_CHIPCO_OTPC_VSEL		0x00000006
+#define	 SSB_CHIPCO_OTPC_SELVL		0x00000001
+#define SSB_CHIPCO_OTPP			0x0018		/* OTP prog */
+#define	 SSB_CHIPCO_OTPP_COL		0x000000FF
+#define	 SSB_CHIPCO_OTPP_ROW		0x0000FF00
+#define	 SSB_CHIPCO_OTPP_ROW_SHIFT	8
+#define	 SSB_CHIPCO_OTPP_READERR	0x10000000
+#define	 SSB_CHIPCO_OTPP_VALUE		0x20000000
+#define	 SSB_CHIPCO_OTPP_READ		0x40000000
+#define	 SSB_CHIPCO_OTPP_START		0x80000000
+#define	 SSB_CHIPCO_OTPP_BUSY		0x80000000
+#define SSB_CHIPCO_IRQSTAT		0x0020
+#define SSB_CHIPCO_IRQMASK		0x0024
+#define	 SSB_CHIPCO_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 SSB_CHIPCO_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 SSB_CHIPCO_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define SSB_CHIPCO_CHIPCTL		0x0028		/* Rev >= 11 only */
+#define SSB_CHIPCO_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define SSB_CHIPCO_JCMD			0x0030		/* Rev >= 10 only */
+#define  SSB_CHIPCO_JCMD_START		0x80000000
+#define  SSB_CHIPCO_JCMD_BUSY		0x80000000
+#define  SSB_CHIPCO_JCMD_PAUSE		0x40000000
+#define  SSB_CHIPCO_JCMD0_ACC_MASK	0x0000F000
+#define  SSB_CHIPCO_JCMD0_ACC_IRDR	0x00000000
+#define  SSB_CHIPCO_JCMD0_ACC_DR	0x00001000
+#define  SSB_CHIPCO_JCMD0_ACC_IR	0x00002000
+#define  SSB_CHIPCO_JCMD0_ACC_RESET	0x00003000
+#define  SSB_CHIPCO_JCMD0_ACC_IRPDR	0x00004000
+#define  SSB_CHIPCO_JCMD0_ACC_PDR	0x00005000
+#define  SSB_CHIPCO_JCMD0_IRW_MASK	0x00000F00
+#define  SSB_CHIPCO_JCMD_ACC_MASK	0x000F0000	/* Changes for corerev 11 */
+#define  SSB_CHIPCO_JCMD_ACC_IRDR	0x00000000
+#define  SSB_CHIPCO_JCMD_ACC_DR		0x00010000
+#define  SSB_CHIPCO_JCMD_ACC_IR		0x00020000
+#define  SSB_CHIPCO_JCMD_ACC_RESET	0x00030000
+#define  SSB_CHIPCO_JCMD_ACC_IRPDR	0x00040000
+#define  SSB_CHIPCO_JCMD_ACC_PDR	0x00050000
+#define  SSB_CHIPCO_JCMD_IRW_MASK	0x00001F00
+#define  SSB_CHIPCO_JCMD_IRW_SHIFT	8
+#define  SSB_CHIPCO_JCMD_DRW_MASK	0x0000003F
+#define SSB_CHIPCO_JIR			0x0034		/* Rev >= 10 only */
+#define SSB_CHIPCO_JDR			0x0038		/* Rev >= 10 only */
+#define SSB_CHIPCO_JCTL			0x003C		/* Rev >= 10 only */
+#define  SSB_CHIPCO_JCTL_FORCE_CLK	4		/* Force clock */
+#define  SSB_CHIPCO_JCTL_EXT_EN		2		/* Enable external targets */
+#define  SSB_CHIPCO_JCTL_EN		1		/* Enable Jtag master */
+#define SSB_CHIPCO_FLASHCTL		0x0040
+#define  SSB_CHIPCO_FLASHCTL_START	0x80000000
+#define  SSB_CHIPCO_FLASHCTL_BUSY	SSB_CHIPCO_FLASHCTL_START
+#define SSB_CHIPCO_FLASHADDR		0x0044
+#define SSB_CHIPCO_FLASHDATA		0x0048
+#define SSB_CHIPCO_BCAST_ADDR		0x0050
+#define SSB_CHIPCO_BCAST_DATA		0x0054
+#define SSB_CHIPCO_GPIOIN		0x0060
+#define SSB_CHIPCO_GPIOOUT		0x0064
+#define SSB_CHIPCO_GPIOOUTEN		0x0068
+#define SSB_CHIPCO_GPIOCTL		0x006C
+#define SSB_CHIPCO_GPIOPOL		0x0070
+#define SSB_CHIPCO_GPIOIRQ		0x0074
+#define SSB_CHIPCO_WATCHDOG		0x0080
+#define SSB_CHIPCO_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT	16
+#define SSB_CHIPCO_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_CLOCK_N		0x0090
+#define SSB_CHIPCO_CLOCK_SB		0x0094
+#define SSB_CHIPCO_CLOCK_PCI		0x0098
+#define SSB_CHIPCO_CLOCK_M2		0x009C
+#define SSB_CHIPCO_CLOCK_MIPS		0x00A0
+#define SSB_CHIPCO_CLKDIV		0x00A4		/* Rev >= 3 only */
+#define	 SSB_CHIPCO_CLKDIV_SFLASH	0x0F000000
+#define	 SSB_CHIPCO_CLKDIV_SFLASH_SHIFT	24
+#define	 SSB_CHIPCO_CLKDIV_OTP		0x000F0000
+#define	 SSB_CHIPCO_CLKDIV_OTP_SHIFT	16
+#define	 SSB_CHIPCO_CLKDIV_JTAG		0x00000F00
+#define	 SSB_CHIPCO_CLKDIV_JTAG_SHIFT	8
+#define	 SSB_CHIPCO_CLKDIV_UART		0x000000FF
+#define SSB_CHIPCO_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define SSB_CHIPCO_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define SSB_CHIPCO_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  SSB_CHIPCO_SLOWCLKCTL_SRC	0x00000007	/* slow clock source mask */
+#define	  SSB_CHIPCO_SLOWCLKCTL_SRC_LPO		0x00000000	/* source of slow clock is LPO */
+#define   SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  SSB_CHIPCO_SLOECLKCTL_SRC_PCI		0x00000002	/* source of slow clock is PCI */
+#define  SSB_CHIPCO_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  SSB_CHIPCO_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  SSB_CHIPCO_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  SSB_CHIPCO_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  SSB_CHIPCO_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  SSB_CHIPCO_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define SSB_CHIPCO_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 SSB_CHIPCO_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 SSB_CHIPCO_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 SSB_CHIPCO_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 SSB_CHIPCO_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 SSB_CHIPCO_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT	16
+#define SSB_CHIPCO_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define SSB_CHIPCO_PCMCIA_CFG		0x0100
+#define SSB_CHIPCO_PCMCIA_MEMWAIT	0x0104
+#define SSB_CHIPCO_PCMCIA_ATTRWAIT	0x0108
+#define SSB_CHIPCO_PCMCIA_IOWAIT	0x010C
+#define SSB_CHIPCO_IDE_CFG		0x0110
+#define SSB_CHIPCO_IDE_MEMWAIT		0x0114
+#define SSB_CHIPCO_IDE_ATTRWAIT		0x0118
+#define SSB_CHIPCO_IDE_IOWAIT		0x011C
+#define SSB_CHIPCO_PROG_CFG		0x0120
+#define SSB_CHIPCO_PROG_WAITCNT		0x0124
+#define SSB_CHIPCO_FLASH_CFG		0x0128
+#define SSB_CHIPCO_FLASH_WAITCNT	0x012C
+#define SSB_CHIPCO_UART0_DATA		0x0300
+#define SSB_CHIPCO_UART0_IMR		0x0304
+#define SSB_CHIPCO_UART0_FCR		0x0308
+#define SSB_CHIPCO_UART0_LCR		0x030C
+#define SSB_CHIPCO_UART0_MCR		0x0310
+#define SSB_CHIPCO_UART0_LSR		0x0314
+#define SSB_CHIPCO_UART0_MSR		0x0318
+#define SSB_CHIPCO_UART0_SCRATCH	0x031C
+#define SSB_CHIPCO_UART1_DATA		0x0400
+#define SSB_CHIPCO_UART1_IMR		0x0404
+#define SSB_CHIPCO_UART1_FCR		0x0408
+#define SSB_CHIPCO_UART1_LCR		0x040C
+#define SSB_CHIPCO_UART1_MCR		0x0410
+#define SSB_CHIPCO_UART1_LSR		0x0414
+#define SSB_CHIPCO_UART1_MSR		0x0418
+#define SSB_CHIPCO_UART1_SCRATCH	0x041C
+
+
+
+/** Clockcontrol masks and values **/
+
+/* SSB_CHIPCO_CLOCK_N */
+#define	SSB_CHIPCO_CLK_N1		0x0000003F	/* n1 control */
+#define	SSB_CHIPCO_CLK_N2		0x00003F00	/* n2 control */
+#define	SSB_CHIPCO_CLK_N2_SHIFT		8
+#define	SSB_CHIPCO_CLK_PLLC		0x000F0000	/* pll control */
+#define	SSB_CHIPCO_CLK_PLLC_SHIFT	16
+
+/* SSB_CHIPCO_CLOCK_SB/PCI/UART */
+#define	SSB_CHIPCO_CLK_M1		0x0000003F	/* m1 control */
+#define	SSB_CHIPCO_CLK_M2		0x00003F00	/* m2 control */
+#define	SSB_CHIPCO_CLK_M2_SHIFT		8
+#define	SSB_CHIPCO_CLK_M3		0x003F0000	/* m3 control */
+#define	SSB_CHIPCO_CLK_M3_SHIFT		16
+#define	SSB_CHIPCO_CLK_MC		0x1F000000	/* mux control */
+#define	SSB_CHIPCO_CLK_MC_SHIFT		24
+
+/* N3M Clock control magic field values */
+#define	SSB_CHIPCO_CLK_F6_2		0x02		/* A factor of 2 in */
+#define	SSB_CHIPCO_CLK_F6_3		0x03		/* 6-bit fields like */
+#define	SSB_CHIPCO_CLK_F6_4		0x05		/* N1, M1 or M3 */
+#define	SSB_CHIPCO_CLK_F6_5		0x09
+#define	SSB_CHIPCO_CLK_F6_6		0x11
+#define	SSB_CHIPCO_CLK_F6_7		0x21
+
+#define	SSB_CHIPCO_CLK_F5_BIAS		5		/* 5-bit fields get this added */
+
+#define	SSB_CHIPCO_CLK_MC_BYPASS	0x08
+#define	SSB_CHIPCO_CLK_MC_M1		0x04
+#define	SSB_CHIPCO_CLK_MC_M1M2		0x02
+#define	SSB_CHIPCO_CLK_MC_M1M2M3	0x01
+#define	SSB_CHIPCO_CLK_MC_M1M3		0x11
+
+/* Type 2 Clock control magic field values */
+#define	SSB_CHIPCO_CLK_T2_BIAS		2		/* n1, n2, m1 & m3 bias */
+#define	SSB_CHIPCO_CLK_T2M2_BIAS	3		/* m2 bias */
+
+#define	SSB_CHIPCO_CLK_T2MC_M1BYP	1
+#define	SSB_CHIPCO_CLK_T2MC_M2BYP	2
+#define	SSB_CHIPCO_CLK_T2MC_M3BYP	4
+
+/* Type 6 Clock control magic field values */
+#define	SSB_CHIPCO_CLK_T6_MMASK		1		/* bits of interest in m */
+#define	SSB_CHIPCO_CLK_T6_M0		120000000	/* sb clock for m = 0 */
+#define	SSB_CHIPCO_CLK_T6_M1		100000000	/* sb clock for m = 1 */
+#define	SSB_CHIPCO_CLK_SB2MIPS_T6(sb)	(2 * (sb))
+
+/* Common clock base */
+#define	SSB_CHIPCO_CLK_BASE1		24000000	/* Half the clock freq */
+#define SSB_CHIPCO_CLK_BASE2		12500000	/* Alternate crystal on some PLL's */
+
+/* Clock control values for 200Mhz in 5350 */
+#define	SSB_CHIPCO_CLK_5350_N		0x0311
+#define	SSB_CHIPCO_CLK_5350_M		0x04020009
+
+
+/** Bits in the config registers **/
+
+#define	SSB_CHIPCO_CFG_EN		0x0001		/* Enable */
+#define	SSB_CHIPCO_CFG_EXTM		0x000E		/* Extif Mode */
+#define	 SSB_CHIPCO_CFG_EXTM_ASYNC	0x0002		/* Async/Parallel flash */
+#define	 SSB_CHIPCO_CFG_EXTM_SYNC	0x0004		/* Synchronous */
+#define	 SSB_CHIPCO_CFG_EXTM_PCMCIA	0x0008		/* PCMCIA */
+#define	 SSB_CHIPCO_CFG_EXTM_IDE	0x000A		/* IDE */
+#define	SSB_CHIPCO_CFG_DS16		0x0010		/* Data size, 0=8bit, 1=16bit */
+#define	SSB_CHIPCO_CFG_CLKDIV		0x0060		/* Sync: Clock divisor */
+#define	SSB_CHIPCO_CFG_CLKEN		0x0080		/* Sync: Clock enable */
+#define	SSB_CHIPCO_CFG_BSTRO		0x0100		/* Sync: Size/Bytestrobe */
+
+
+/** Flash-specific control/status values */
+
+/* flashcontrol opcodes for ST flashes */
+#define SSB_CHIPCO_FLASHCTL_ST_WREN	0x0006		/* Write Enable */
+#define SSB_CHIPCO_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */
+#define SSB_CHIPCO_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */
+#define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
+#define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_RSIG	0x03AB		/* Read Electronic Signature */
+
+/* Status register bits for ST flashes */
+#define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
+#define SSB_CHIPCO_FLASHSTA_ST_WEL	0x02		/* Write Enable Latch */
+#define SSB_CHIPCO_FLASHSTA_ST_BP	0x1C		/* Block Protect */
+#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT	2
+#define SSB_CHIPCO_FLASHSTA_ST_SRWD	0x80		/* Status Register Write Disable */
+
+/* flashcontrol opcodes for Atmel flashes */
+#define SSB_CHIPCO_FLASHCTL_AT_READ		0x07E8
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ	0x07D2
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ	/* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ	/* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_STATUS		0x01D7
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE	0x0384
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE	0x0387
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM	0x0283	/* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM	0x0286	/* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM	0x0288
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM	0x0289
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE	0x0281
+#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE	0x0250
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM	0x0382	/* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM	0x0385	/* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD	0x0253
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD	0x0255
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE	0x0260
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE	0x0261
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM	0x0258
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM	0x0259
+
+/* Status register bits for Atmel flashes */
+#define SSB_CHIPCO_FLASHSTA_AT_READY	0x80
+#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH	0x40
+#define SSB_CHIPCO_FLASHSTA_AT_ID	0x38
+#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT	3
+
+
+/** OTP **/
+
+/* OTP regions */
+#define	SSB_CHIPCO_OTP_HW_REGION	SSB_CHIPCO_OTPS_HW_PROTECT
+#define	SSB_CHIPCO_OTP_SW_REGION	SSB_CHIPCO_OTPS_SW_PROTECT
+#define	SSB_CHIPCO_OTP_CID_REGION	SSB_CHIPCO_OTPS_CID_PROTECT
+
+/* OTP regions (Byte offsets from otp size) */
+#define	SSB_CHIPCO_OTP_SWLIM_OFF	(-8)
+#define	SSB_CHIPCO_OTP_CIDBASE_OFF	0
+#define	SSB_CHIPCO_OTP_CIDLIM_OFF	8
+
+/* Predefined OTP words (Word offset from otp size) */
+#define	SSB_CHIPCO_OTP_BOUNDARY_OFF	(-4)
+#define	SSB_CHIPCO_OTP_HWSIGN_OFF	(-3)
+#define	SSB_CHIPCO_OTP_SWSIGN_OFF	(-2)
+#define	SSB_CHIPCO_OTP_CIDSIGN_OFF	(-1)
+
+#define	SSB_CHIPCO_OTP_CID_OFF		0
+#define	SSB_CHIPCO_OTP_PKG_OFF		1
+#define	SSB_CHIPCO_OTP_FID_OFF		2
+#define	SSB_CHIPCO_OTP_RSV_OFF		3
+#define	SSB_CHIPCO_OTP_LIM_OFF		4
+
+#define	SSB_CHIPCO_OTP_SIGNATURE	0x578A
+#define	SSB_CHIPCO_OTP_MAGIC		0x4E56
+
+
+struct ssb_device;
+struct ssb_serial_port;
+
+struct ssb_chipcommon {
+	struct ssb_device *dev;
+	u32 capabilities;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+};
+
+extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
+
+#include <linux/pm.h>
+extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
+extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
+
+extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+                                    u32 *plltype, u32 *n, u32 *m);
+extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+					u32 *plltype, u32 *n, u32 *m);
+extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
+				   unsigned long ns_per_cycle);
+
+enum ssb_clkmode {
+	SSB_CLKMODE_SLOW,
+	SSB_CLKMODE_FAST,
+	SSB_CLKMODE_DYNAMIC,
+};
+
+extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+				     enum ssb_clkmode mode);
+
+extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
+					  u32 ticks);
+
+u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
+
+void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+				  struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+#endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/include/linux/ssb/ssb_driver_extif.h b/include/linux/ssb/ssb_driver_extif.h
new file mode 100644
index 00000000000..a9164357b5a
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_extif.h
@@ -0,0 +1,204 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+ * for the BCM47xx family of SiliconBackplane-based chips.
+ *
+ * The External Interface core supports a total of three external chip selects
+ * supporting external interfaces. One of the external chip selects is
+ * used for Flash, one is used for PCMCIA, and the other may be
+ * programmed to support either a synchronous interface or an
+ * asynchronous interface. The asynchronous interface can be used to
+ * support external devices such as UARTs and the BCM2019 Bluetooth
+ * baseband processor.
+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+#ifndef LINUX_SSB_EXTIFCORE_H_
+#define LINUX_SSB_EXTIFCORE_H_
+
+/* external interface address space */
+#define	SSB_EXTIF_PCMCIA_MEMBASE(x)	(x)
+#define	SSB_EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
+#define	SSB_EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
+#define	SSB_EXTIF_CFGIF_BASE(x)		((x) + 0x800000)
+#define	SSB_EXTIF_FLASH_BASE(x)		((x) + 0xc00000)
+
+#define SSB_EXTIF_NR_GPIOOUT		5
+/* GPIO NOTE:
+ * The multiple instances of output and output enable registers
+ * are present to allow driver software for multiple cores to control
+ * gpio outputs without needing to share a single register pair.
+ * Use the following helper macro to get a register offset value.
+ */
+#define SSB_EXTIF_GPIO_OUT(index)	({		\
+	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
+	SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8);	\
+					})
+#define SSB_EXTIF_GPIO_OUTEN(index)	({		\
+	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
+	SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8);	\
+					})
+
+/** EXTIF core registers **/
+
+#define SSB_EXTIF_CTL			0x0000
+#define  SSB_EXTIF_CTL_UARTEN		(1 << 0) /* UART enable */
+#define SSB_EXTIF_EXTSTAT		0x0004
+#define  SSB_EXTIF_EXTSTAT_EMODE	(1 << 0) /* Endian mode (ro) */
+#define  SSB_EXTIF_EXTSTAT_EIRQPIN	(1 << 1) /* External interrupt pin (ro) */
+#define  SSB_EXTIF_EXTSTAT_GPIOIRQPIN	(1 << 2) /* GPIO interrupt pin (ro) */
+#define SSB_EXTIF_PCMCIA_CFG		0x0010
+#define SSB_EXTIF_PCMCIA_MEMWAIT	0x0014
+#define SSB_EXTIF_PCMCIA_ATTRWAIT	0x0018
+#define SSB_EXTIF_PCMCIA_IOWAIT		0x001C
+#define SSB_EXTIF_PROG_CFG		0x0020
+#define SSB_EXTIF_PROG_WAITCNT		0x0024
+#define SSB_EXTIF_FLASH_CFG		0x0028
+#define SSB_EXTIF_FLASH_WAITCNT		0x002C
+#define SSB_EXTIF_WATCHDOG		0x0040
+#define SSB_EXTIF_CLOCK_N		0x0044
+#define SSB_EXTIF_CLOCK_SB		0x0048
+#define SSB_EXTIF_CLOCK_PCI		0x004C
+#define SSB_EXTIF_CLOCK_MII		0x0050
+#define SSB_EXTIF_GPIO_IN		0x0060
+#define SSB_EXTIF_GPIO_OUT_BASE		0x0064
+#define SSB_EXTIF_GPIO_OUTEN_BASE	0x0068
+#define SSB_EXTIF_EJTAG_OUTEN		0x0090
+#define SSB_EXTIF_GPIO_INTPOL		0x0094
+#define SSB_EXTIF_GPIO_INTMASK		0x0098
+#define SSB_EXTIF_UART_DATA		0x0300
+#define SSB_EXTIF_UART_TIMER		0x0310
+#define SSB_EXTIF_UART_FCR		0x0320
+#define SSB_EXTIF_UART_LCR		0x0330
+#define SSB_EXTIF_UART_MCR		0x0340
+#define SSB_EXTIF_UART_LSR		0x0350
+#define SSB_EXTIF_UART_MSR		0x0360
+#define SSB_EXTIF_UART_SCRATCH		0x0370
+
+
+
+
+/* pcmcia/prog/flash_config */
+#define	SSB_EXTCFG_EN			(1 << 0)	/* enable */
+#define	SSB_EXTCFG_MODE			0xE		/* mode */
+#define	SSB_EXTCFG_MODE_SHIFT		1
+#define	 SSB_EXTCFG_MODE_FLASH		0x0		/* flash/asynchronous mode */
+#define	 SSB_EXTCFG_MODE_SYNC		0x2		/* synchronous mode */
+#define	 SSB_EXTCFG_MODE_PCMCIA		0x4		/* pcmcia mode */
+#define	SSB_EXTCFG_DS16			(1 << 4)	/* destsize:  0=8bit, 1=16bit */
+#define	SSB_EXTCFG_BSWAP		(1 << 5)	/* byteswap */
+#define	SSB_EXTCFG_CLKDIV		0xC0		/* clock divider */
+#define	SSB_EXTCFG_CLKDIV_SHIFT		6
+#define	 SSB_EXTCFG_CLKDIV_2		0x0		/* backplane/2 */
+#define	 SSB_EXTCFG_CLKDIV_3		0x40		/* backplane/3 */
+#define	 SSB_EXTCFG_CLKDIV_4		0x80		/* backplane/4 */
+#define	SSB_EXTCFG_CLKEN		(1 << 8)	/* clock enable */
+#define	SSB_EXTCFG_STROBE		(1 << 9)	/* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define	SSB_PCMCIA_MEMW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_MEMW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_MEMW_1_SHIFT		8
+#define	SSB_PCMCIA_MEMW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_MEMW_2_SHIFT		16
+#define	SSB_PCMCIA_MEMW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_MEMW_3_SHIFT		24
+
+/* pcmcia_attrwait */
+#define	SSB_PCMCIA_ATTW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_ATTW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_ATTW_1_SHIFT		8
+#define	SSB_PCMCIA_ATTW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_ATTW_2_SHIFT		16
+#define	SSB_PCMCIA_ATTW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_ATTW_3_SHIFT		24
+
+/* pcmcia_iowait */
+#define	SSB_PCMCIA_IOW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_IOW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_IOW_1_SHIFT		8
+#define	SSB_PCMCIA_IOW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_IOW_2_SHIFT		16
+#define	SSB_PCMCIA_IOW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_IOW_3_SHIFT		24
+
+/* prog_waitcount */
+#define	SSB_PROG_WCNT_0			0x0000001F	/* waitcount0 */
+#define	SSB_PROG_WCNT_1			0x00001F00	/* waitcount1 */
+#define	SSB_PROG_WCNT_1_SHIFT		8
+#define	SSB_PROG_WCNT_2			0x001F0000	/* waitcount2 */
+#define	SSB_PROG_WCNT_2_SHIFT		16
+#define	SSB_PROG_WCNT_3			0x1F000000	/* waitcount3 */
+#define	SSB_PROG_WCNT_3_SHIFT		24
+
+#define SSB_PROG_W0			0x0000000C
+#define SSB_PROG_W1			0x00000A00
+#define SSB_PROG_W2			0x00020000
+#define SSB_PROG_W3			0x01000000
+
+/* flash_waitcount */
+#define	SSB_FLASH_WCNT_0		0x0000001F	/* waitcount0 */
+#define	SSB_FLASH_WCNT_1		0x00001F00	/* waitcount1 */
+#define	SSB_FLASH_WCNT_1_SHIFT		8
+#define	SSB_FLASH_WCNT_2		0x001F0000	/* waitcount2 */
+#define	SSB_FLASH_WCNT_2_SHIFT		16
+#define	SSB_FLASH_WCNT_3		0x1F000000	/* waitcount3 */
+#define	SSB_FLASH_WCNT_3_SHIFT		24
+
+/* watchdog */
+#define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
+
+
+
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+
+struct ssb_extif {
+	struct ssb_device *dev;
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+	return (extif->dev != NULL);
+}
+
+extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+			               u32 *plltype, u32 *n, u32 *m);
+
+extern void ssb_extif_timing_init(struct ssb_extif *extif,
+				  unsigned long ns);
+
+u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
+
+void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
+
+void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_extif_serial_init(struct ssb_extif *extif,
+				 struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+
+#else /* CONFIG_SSB_DRIVER_EXTIF */
+/* extif disabled */
+
+struct ssb_extif {
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+	return 0;
+}
+
+static inline
+void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+			        u32 *plltype, u32 *n, u32 *m)
+{
+}
+
+#endif /* CONFIG_SSB_DRIVER_EXTIF */
+#endif /* LINUX_SSB_EXTIFCORE_H_ */
diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h
new file mode 100644
index 00000000000..5f44e9740cd
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -0,0 +1,46 @@
+#ifndef LINUX_SSB_MIPSCORE_H_
+#define LINUX_SSB_MIPSCORE_H_
+
+#ifdef CONFIG_SSB_DRIVER_MIPS
+
+struct ssb_device;
+
+struct ssb_serial_port {
+	void *regs;
+	unsigned long clockspeed;
+	unsigned int irq;
+	unsigned int baud_base;
+	unsigned int reg_shift;
+};
+
+
+struct ssb_mipscore {
+	struct ssb_device *dev;
+
+	int nr_serial_ports;
+	struct ssb_serial_port serial_ports[4];
+
+	u8 flash_buswidth;
+	u32 flash_window;
+	u32 flash_window_size;
+};
+
+extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore);
+
+extern unsigned int ssb_mips_irq(struct ssb_device *dev);
+
+
+#else /* CONFIG_SSB_DRIVER_MIPS */
+
+struct ssb_mipscore {
+};
+
+static inline
+void ssb_mipscore_init(struct ssb_mipscore *mcore)
+{
+}
+
+#endif /* CONFIG_SSB_DRIVER_MIPS */
+
+#endif /* LINUX_SSB_MIPSCORE_H_ */
diff --git a/include/linux/ssb/ssb_driver_pci.h b/include/linux/ssb/ssb_driver_pci.h
new file mode 100644
index 00000000000..9cfffb7b1a2
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_pci.h
@@ -0,0 +1,106 @@
+#ifndef LINUX_SSB_PCICORE_H_
+#define LINUX_SSB_PCICORE_H_
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+
+/* PCI core registers. */
+#define SSB_PCICORE_CTL			0x0000	/* PCI Control */
+#define  SSB_PCICORE_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  SSB_PCICORE_CTL_RST		0x00000002 /* PCI_RESET driven out to pin */
+#define  SSB_PCICORE_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  SSB_PCICORE_CTL_CLK		0x00000008 /* Gate for clock driven out to pin */
+#define SSB_PCICORE_ARBCTL		0x0010	/* PCI Arbiter Control */
+#define  SSB_PCICORE_ARBCTL_INTERN	0x00000001 /* Use internal arbiter */
+#define  SSB_PCICORE_ARBCTL_EXTERN	0x00000002 /* Use external arbiter */
+#define  SSB_PCICORE_ARBCTL_PARKID	0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   SSB_PCICORE_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   SSB_PCICORE_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   SSB_PCICORE_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   SSB_PCICORE_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define SSB_PCICORE_ISTAT		0x0020	/* Interrupt status */
+#define  SSB_PCICORE_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  SSB_PCICORE_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  SSB_PCICORE_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  SSB_PCICORE_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  SSB_PCICORE_ISTAT_PME		0x00000010 /* PCI PME# */
+#define SSB_PCICORE_IMASK		0x0024	/* Interrupt mask */
+#define  SSB_PCICORE_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  SSB_PCICORE_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  SSB_PCICORE_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  SSB_PCICORE_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  SSB_PCICORE_IMASK_PME		0x00000010 /* PCI PME# */
+#define SSB_PCICORE_MBOX		0x0028	/* Backplane to PCI Mailbox */
+#define  SSB_PCICORE_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  SSB_PCICORE_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  SSB_PCICORE_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  SSB_PCICORE_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  SSB_PCICORE_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  SSB_PCICORE_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  SSB_PCICORE_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  SSB_PCICORE_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define SSB_PCICORE_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  SSB_PCICORE_BCAST_ADDR_MASK	0x000000FF
+#define SSB_PCICORE_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define SSB_PCICORE_GPIO_IN		0x0060	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_OUT		0x0064	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_CTL		0x006C	/* rev >= 2 only */
+#define SSB_PCICORE_SBTOPCI0		0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  SSB_PCICORE_SBTOPCI0_MASK	0xFC000000
+#define SSB_PCICORE_SBTOPCI1		0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  SSB_PCICORE_SBTOPCI1_MASK	0xFC000000
+#define SSB_PCICORE_SBTOPCI2		0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  SSB_PCICORE_SBTOPCI2_MASK	0xC0000000
+
+/* SBtoPCIx */
+#define SSB_PCICORE_SBTOPCI_MEM		0x00000000
+#define SSB_PCICORE_SBTOPCI_IO		0x00000001
+#define SSB_PCICORE_SBTOPCI_CFG0	0x00000002
+#define SSB_PCICORE_SBTOPCI_CFG1	0x00000003
+#define SSB_PCICORE_SBTOPCI_PREF	0x00000004 /* Prefetch enable */
+#define SSB_PCICORE_SBTOPCI_BURST	0x00000008 /* Burst enable */
+#define SSB_PCICORE_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define SSB_PCICORE_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  SSB_PCICORE_SBTOPCI_RC_READ	0x00000000 /* Memory read */
+#define  SSB_PCICORE_SBTOPCI_RC_READL	0x00000010 /* Memory read line */
+#define  SSB_PCICORE_SBTOPCI_RC_READM	0x00000020 /* Memory read multiple */
+
+
+/* PCIcore specific boardflags */
+#define SSB_PCICORE_BFL_NOPCI		0x00000400 /* Board leaves PCI floating */
+
+
+struct ssb_pcicore {
+	struct ssb_device *dev;
+	u8 setup_done:1;
+	u8 hostmode:1;
+	u8 cardbusmode:1;
+};
+
+extern void ssb_pcicore_init(struct ssb_pcicore *pc);
+
+/* Enable IRQ routing for a specific device */
+extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+					  struct ssb_device *dev);
+
+
+#else /* CONFIG_SSB_DRIVER_PCICORE */
+
+
+struct ssb_pcicore {
+};
+
+static inline
+void ssb_pcicore_init(struct ssb_pcicore *pc)
+{
+}
+
+static inline
+int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+				   struct ssb_device *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_SSB_DRIVER_PCICORE */
+#endif /* LINUX_SSB_PCICORE_H_ */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
new file mode 100644
index 00000000000..47c7c71a5ac
--- /dev/null
+++ b/include/linux/ssb/ssb_regs.h
@@ -0,0 +1,292 @@
+#ifndef LINUX_SSB_REGS_H_
+#define LINUX_SSB_REGS_H_
+
+
+/* SiliconBackplane Address Map.
+ * All regions may not exist on all chips.
+ */
+#define SSB_SDRAM_BASE		0x00000000U	/* Physical SDRAM */
+#define SSB_PCI_MEM		0x08000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define SSB_PCI_CFG		0x0c000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define	SSB_SDRAM_SWAPPED	0x10000000U	/* Byteswapped Physical SDRAM */
+#define SSB_ENUM_BASE    	0x18000000U	/* Enumeration space base */
+#define	SSB_ENUM_LIMIT		0x18010000U	/* Enumeration space limit */
+
+#define	SSB_FLASH2		0x1c000000U	/* Flash Region 2 (region 1 shadowed here) */
+#define	SSB_FLASH2_SZ		0x02000000U	/* Size of Flash Region 2 */
+
+#define	SSB_EXTIF_BASE		0x1f000000U	/* External Interface region base address */
+#define	SSB_FLASH1		0x1fc00000U	/* Flash Region 1 */
+#define	SSB_FLASH1_SZ		0x00400000U	/* Size of Flash Region 1 */
+
+#define SSB_PCI_DMA		0x40000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define SSB_PCI_DMA_SZ		0x40000000U	/* Client Mode sb2pcitranslation2 size in bytes */
+#define SSB_PCIE_DMA_L32	0x00000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
+#define SSB_PCIE_DMA_H32	0x80000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
+#define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
+#define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
+
+
+/* Enumeration space constants */
+#define SSB_CORE_SIZE		0x1000	/* Size of a core MMIO area */
+#define SSB_MAX_NR_CORES	((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
+
+
+/* mips address */
+#define	SSB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
+
+
+/* SSB PCI config space registers. */
+#define SSB_PMCSR		0x44
+#define  SSB_PE			0x100
+#define	SSB_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define	SSB_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define	SSB_SPROMCTL		0x88	/* SPROM control */
+#define  SSB_SPROMCTL_WE	0x10	/* SPROM write enable */
+#define	SSB_BAR1_CONTROL	0x8c	/* Address space 1 burst control */
+#define SSB_PCI_IRQS		0x90	/* PCI interrupts */
+#define SSB_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define SSB_BACKPLANE_IRQS	0x98	/* Backplane Interrupts */
+#define SSB_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define SSB_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define SSB_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  SSB_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  SSB_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  SSB_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  SSB_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+
+#define SSB_BAR0_MAX_RETRIES	50
+
+/* Silicon backplane configuration register definitions */
+#define SSB_IPSFLAG		0x0F08
+#define	 SSB_IPSFLAG_IRQ1	0x0000003F /* which sbflags get routed to mips interrupt 1 */
+#define	 SSB_IPSFLAG_IRQ1_SHIFT	0
+#define	 SSB_IPSFLAG_IRQ2	0x00003F00 /* which sbflags get routed to mips interrupt 2 */
+#define	 SSB_IPSFLAG_IRQ2_SHIFT	8
+#define	 SSB_IPSFLAG_IRQ3	0x003F0000 /* which sbflags get routed to mips interrupt 3 */
+#define	 SSB_IPSFLAG_IRQ3_SHIFT	16
+#define	 SSB_IPSFLAG_IRQ4	0x3F000000 /* which sbflags get routed to mips interrupt 4 */
+#define	 SSB_IPSFLAG_IRQ4_SHIFT	24
+#define SSB_TPSFLAG		0x0F18
+#define  SSB_TPSFLAG_BPFLAG	0x0000003F /* Backplane flag # */
+#define  SSB_TPSFLAG_ALWAYSIRQ	0x00000040 /* IRQ is always sent on the Backplane */
+#define SSB_TMERRLOGA		0x0F48
+#define SSB_TMERRLOG		0x0F50
+#define SSB_ADMATCH3		0x0F60
+#define SSB_ADMATCH2		0x0F68
+#define SSB_ADMATCH1		0x0F70
+#define SSB_IMSTATE		0x0F90     /* SB Initiator Agent State */
+#define  SSB_IMSTATE_PC		0x0000000f /* Pipe Count */
+#define  SSB_IMSTATE_AP_MASK	0x00000030 /* Arbitration Priority */
+#define  SSB_IMSTATE_AP_BOTH	0x00000000 /* Use both timeslices and token */
+#define  SSB_IMSTATE_AP_TS	0x00000010 /* Use timeslices only */
+#define  SSB_IMSTATE_AP_TK	0x00000020 /* Use token only */
+#define  SSB_IMSTATE_AP_RSV	0x00000030 /* Reserved */
+#define  SSB_IMSTATE_IBE	0x00020000 /* In Band Error */
+#define  SSB_IMSTATE_TO		0x00040000 /* Timeout */
+#define SSB_INTVEC		0x0F94     /* SB Interrupt Mask */
+#define  SSB_INTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
+#define  SSB_INTVEC_ENET0	0x00000002 /* Enable interrupts for enet 0 */
+#define  SSB_INTVEC_ILINE20	0x00000004 /* Enable interrupts for iline20 */
+#define  SSB_INTVEC_CODEC	0x00000008 /* Enable interrupts for v90 codec */
+#define  SSB_INTVEC_USB		0x00000010 /* Enable interrupts for usb */
+#define  SSB_INTVEC_EXTIF	0x00000020 /* Enable interrupts for external i/f */
+#define  SSB_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */
+#define SSB_TMSLOW		0x0F98     /* SB Target State Low */
+#define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
+#define  SSB_TMSLOW_REJECT_22	0x00000002 /* Reject (Backplane rev 2.2) */
+#define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
+#define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
+#define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
+#define  SSB_TMSLOW_PE		0x40000000 /* Power Management Enable */
+#define  SSB_TMSLOW_BE		0x80000000 /* BIST Enable */
+#define SSB_TMSHIGH		0x0F9C     /* SB Target State High */
+#define  SSB_TMSHIGH_SERR	0x00000001 /* S-error */
+#define  SSB_TMSHIGH_INT	0x00000002 /* Interrupt */
+#define  SSB_TMSHIGH_BUSY	0x00000004 /* Busy */
+#define  SSB_TMSHIGH_TO		0x00000020 /* Timeout. Backplane rev >= 2.3 only */
+#define  SSB_TMSHIGH_COREFL	0x1FFF0000 /* Core specific flags */
+#define  SSB_TMSHIGH_COREFL_SHIFT	16
+#define  SSB_TMSHIGH_DMA64	0x10000000 /* 64bit DMA supported */
+#define  SSB_TMSHIGH_GCR	0x20000000 /* Gated Clock Request */
+#define  SSB_TMSHIGH_BISTF	0x40000000 /* BIST Failed */
+#define  SSB_TMSHIGH_BISTD	0x80000000 /* BIST Done */
+#define SSB_BWA0		0x0FA0
+#define SSB_IMCFGLO		0x0FA8
+#define  SSB_IMCFGLO_SERTO	0x00000007 /* Service timeout */
+#define  SSB_IMCFGLO_REQTO	0x00000070 /* Request timeout */
+#define  SSB_IMCFGLO_REQTO_SHIFT	4
+#define  SSB_IMCFGLO_CONNID	0x00FF0000 /* Connection ID */
+#define  SSB_IMCFGLO_CONNID_SHIFT	16
+#define SSB_IMCFGHI		0x0FAC
+#define SSB_ADMATCH0		0x0FB0
+#define SSB_TMCFGLO		0x0FB8
+#define SSB_TMCFGHI		0x0FBC
+#define SSB_BCONFIG		0x0FC0
+#define SSB_BSTATE		0x0FC8
+#define SSB_ACTCFG		0x0FD8
+#define SSB_FLAGST		0x0FE8
+#define SSB_IDLOW		0x0FF8
+#define  SSB_IDLOW_CFGSP	0x00000003 /* Config Space */
+#define  SSB_IDLOW_ADDRNGE	0x00000038 /* Address Ranges supported */
+#define  SSB_IDLOW_ADDRNGE_SHIFT	3
+#define  SSB_IDLOW_SYNC		0x00000040
+#define  SSB_IDLOW_INITIATOR	0x00000080
+#define  SSB_IDLOW_MIBL		0x00000F00 /* Minimum Backplane latency */
+#define  SSB_IDLOW_MIBL_SHIFT	8
+#define  SSB_IDLOW_MABL		0x0000F000 /* Maximum Backplane latency */
+#define  SSB_IDLOW_MABL_SHIFT	12
+#define  SSB_IDLOW_TIF		0x00010000 /* This Initiator is first */
+#define  SSB_IDLOW_CCW		0x000C0000 /* Cycle counter width */
+#define  SSB_IDLOW_CCW_SHIFT	18
+#define  SSB_IDLOW_TPT		0x00F00000 /* Target ports */
+#define  SSB_IDLOW_TPT_SHIFT	20
+#define  SSB_IDLOW_INITP	0x0F000000 /* Initiator ports */
+#define  SSB_IDLOW_INITP_SHIFT	24
+#define  SSB_IDLOW_SSBREV	0xF0000000 /* Sonics Backplane Revision code */
+#define  SSB_IDLOW_SSBREV_22	0x00000000 /* <= 2.2 */
+#define  SSB_IDLOW_SSBREV_23	0x10000000 /* 2.3 */
+#define SSB_IDHIGH		0x0FFC     /* SB Identification High */
+#define  SSB_IDHIGH_RCLO	0x0000000F /* Revision Code (low part) */
+#define  SSB_IDHIGH_CC		0x00008FF0 /* Core Code */
+#define  SSB_IDHIGH_CC_SHIFT	4
+#define  SSB_IDHIGH_RCHI	0x00007000 /* Revision Code (high part) */
+#define  SSB_IDHIGH_RCHI_SHIFT	8	   /* yes, shift 8 is right */
+#define  SSB_IDHIGH_VC		0xFFFF0000 /* Vendor Code */
+#define  SSB_IDHIGH_VC_SHIFT	16
+
+/* SPROM shadow area. If not otherwise noted, fields are
+ * two bytes wide. Note that the SPROM can _only_ be read
+ * in two-byte quantinies.
+ */
+#define SSB_SPROMSIZE_WORDS		64
+#define SSB_SPROMSIZE_BYTES		(SSB_SPROMSIZE_WORDS * sizeof(u16))
+#define SSB_SPROM_BASE			0x1000
+#define SSB_SPROM_REVISION		0x107E
+#define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+#define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+#define  SSB_SPROM_REVISION_CRC_SHIFT	8
+/* SPROM Revision 1 */
+#define SSB_SPROM1_SPID			0x1004	/* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID			0x1006	/* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID			0x1008	/* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC		0x1048	/* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC		0x104E	/* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC		0x1054	/* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY		0x105A	/* Ethernet PHY settings */
+#define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+#define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+#define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+#define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+#define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+#define SSB_SPROM1_BINF			0x105C	/* Board info */
+#define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+#define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+#define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+#define  SSB_SPROM1_BINF_ANTA		0x3000	/* Available A-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTA_SHIFT	12
+#define  SSB_SPROM1_BINF_ANTBG		0xC000	/* Available B-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTBG_SHIFT	14
+#define SSB_SPROM1_PA0B0		0x105E
+#define SSB_SPROM1_PA0B1		0x1060
+#define SSB_SPROM1_PA0B2		0x1062
+#define SSB_SPROM1_GPIOA		0x1064	/* General Purpose IO pins 0 and 1 */
+#define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+#define SSB_SPROM1_GPIOB		0x1066	/* General Purpuse IO pins 2 and 3 */
+#define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+#define SSB_SPROM1_MAXPWR		0x1068	/* Power Amplifier Max Power */
+#define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+#define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+#define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+#define SSB_SPROM1_PA1B0		0x106A
+#define SSB_SPROM1_PA1B1		0x106C
+#define SSB_SPROM1_PA1B2		0x106E
+#define SSB_SPROM1_ITSSI		0x1070	/* Idle TSSI Target */
+#define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+#define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+#define  SSB_SPROM1_ITSSI_A_SHIFT	8
+#define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM1_AGAIN_A		0x00FF	/* A-PHY */
+#define  SSB_SPROM1_AGAIN_BG		0xFF00	/* B-PHY and G-PHY */
+#define  SSB_SPROM1_AGAIN_BG_SHIFT	8
+#define SSB_SPROM1_OEM			0x1076	/* 8 bytes OEM string (rev 1 only) */
+/* SPROM Revision 2 (inherits from rev 1) */
+#define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A		0x103A	/* A-PHY Max Power */
+#define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+#define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+#define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+#define SSB_SPROM2_PA1LOB0		0x103C	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1		0x103E	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2		0x1040	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0		0x1042	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1		0x1044	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2		0x1046	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO			0x1078	/* OFDM Power Offset from CCK Level */
+#define  SSB_SPROM2_OPO_VALUE		0x00FF
+#define  SSB_SPROM2_OPO_UNUSED		0xFF00
+#define SSB_SPROM2_CCODE		0x107C	/* Two char Country Code */
+/* SPROM Revision 3 (inherits from rev 2) */
+#define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC		0x1042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+#define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+#define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+#define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+#define SSB_SPROM3_CCKPO		0x1078	/* CCK Power Offset */
+#define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+#define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+#define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+#define  SSB_SPROM3_CCKPO_55M		0x0F00	/* 5.5M Rate PO */
+#define  SSB_SPROM3_CCKPO_55M_SHIFT	8
+#define  SSB_SPROM3_CCKPO_11M		0xF000	/* 11M Rate PO */
+#define  SSB_SPROM3_CCKPO_11M_SHIFT	12
+#define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+/* Values for SSB_SPROM1_BINF_CCODE */
+enum {
+	SSB_SPROM1CCODE_WORLD = 0,
+	SSB_SPROM1CCODE_THAILAND,
+	SSB_SPROM1CCODE_ISRAEL,
+	SSB_SPROM1CCODE_JORDAN,
+	SSB_SPROM1CCODE_CHINA,
+	SSB_SPROM1CCODE_JAPAN,
+	SSB_SPROM1CCODE_USA_CANADA_ANZ,
+	SSB_SPROM1CCODE_EUROPE,
+	SSB_SPROM1CCODE_USA_LOW,
+	SSB_SPROM1CCODE_JAPAN_HIGH,
+	SSB_SPROM1CCODE_ALL,
+	SSB_SPROM1CCODE_NONE,
+};
+
+/* Address-Match values and masks (SSB_ADMATCHxxx) */
+#define SSB_ADM_TYPE			0x00000003	/* Address type */
+#define  SSB_ADM_TYPE0			0
+#define  SSB_ADM_TYPE1			1
+#define  SSB_ADM_TYPE2			2
+#define SSB_ADM_AD64			0x00000004
+#define SSB_ADM_SZ0			0x000000F8	/* Type0 size */
+#define SSB_ADM_SZ0_SHIFT		3
+#define SSB_ADM_SZ1			0x000001F8	/* Type1 size */
+#define SSB_ADM_SZ1_SHIFT		3
+#define SSB_ADM_SZ2			0x000001F8	/* Type2 size */
+#define SSB_ADM_SZ2_SHIFT		3
+#define SSB_ADM_EN			0x00000400	/* Enable */
+#define SSB_ADM_NEG			0x00000800	/* Negative decode */
+#define SSB_ADM_BASE0			0xFFFFFF00	/* Type0 base address */
+#define SSB_ADM_BASE0_SHIFT		8
+#define SSB_ADM_BASE1			0xFFFFF000	/* Type1 base address for the core */
+#define SSB_ADM_BASE1_SHIFT		12
+#define SSB_ADM_BASE2			0xFFFF0000	/* Type2 base address for the core */
+#define SSB_ADM_BASE2_SHIFT		16
+
+
+#endif /* LINUX_SSB_REGS_H_ */
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 665f85f2a3a..edf681a7fd8 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -221,7 +221,7 @@ extern void swap_unplug_io_fn(struct backing_dev_info *, struct page *);
 /* linux/mm/page_io.c */
 extern int swap_readpage(struct file *, struct page *);
 extern int swap_writepage(struct page *page, struct writeback_control *wbc);
-extern int end_swap_bio_read(struct bio *bio, unsigned int bytes_done, int err);
+extern void end_swap_bio_read(struct bio *bio, int err);
 
 /* linux/mm/swap_state.c */
 extern struct address_space swapper_space;
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index be8228e50a2..149ab62329e 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -3,6 +3,8 @@
  *
  * Copyright (c) 2001,2002 Patrick Mochel
  * Copyright (c) 2004 Silicon Graphics, Inc.
+ * Copyright (c) 2007 SUSE Linux Products GmbH
+ * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
  *
  * Please see Documentation/filesystems/sysfs.txt for more information.
  */
@@ -17,23 +19,20 @@
 
 struct kobject;
 struct module;
-struct nameidata;
-struct dentry;
-struct sysfs_dirent;
 
 /* FIXME
  * The *owner field is no longer used, but leave around
  * until the tree gets cleaned up fully.
  */
 struct attribute {
-	const char		* name;
-	struct module		* owner;
+	const char		*name;
+	struct module		*owner;
 	mode_t			mode;
 };
 
 struct attribute_group {
-	const char		* name;
-	struct attribute	** attrs;
+	const char		*name;
+	struct attribute	**attrs;
 };
 
 
@@ -77,72 +76,41 @@ struct sysfs_ops {
 	ssize_t	(*store)(struct kobject *,struct attribute *,const char *, size_t);
 };
 
-#define SYSFS_TYPE_MASK		0x00ff
-#define SYSFS_ROOT		0x0001
-#define SYSFS_DIR		0x0002
-#define SYSFS_KOBJ_ATTR 	0x0004
-#define SYSFS_KOBJ_BIN_ATTR	0x0008
-#define SYSFS_KOBJ_LINK 	0x0020
-#define SYSFS_COPY_NAME		(SYSFS_DIR | SYSFS_KOBJ_LINK)
-
-#define SYSFS_FLAG_MASK		~SYSFS_TYPE_MASK
-#define SYSFS_FLAG_REMOVED	0x0100
-
 #ifdef CONFIG_SYSFS
 
-extern int sysfs_schedule_callback(struct kobject *kobj,
-		void (*func)(void *), void *data, struct module *owner);
-
-extern int __must_check
-sysfs_create_dir(struct kobject *kobj, struct sysfs_dirent *shadow_parent_sd);
-
-extern void
-sysfs_remove_dir(struct kobject *);
-
-extern int __must_check
-sysfs_rename_dir(struct kobject *kobj, struct sysfs_dirent *new_parent_sd,
-		 const char *new_name);
-
-extern int __must_check
-sysfs_move_dir(struct kobject *, struct kobject *);
-
-extern int __must_check
-sysfs_create_file(struct kobject *, const struct attribute *);
+int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
+			    void *data, struct module *owner);
 
-extern int __must_check
-sysfs_update_file(struct kobject *, const struct attribute *);
+int __must_check sysfs_create_dir(struct kobject *kobj);
+void sysfs_remove_dir(struct kobject *kobj);
+int __must_check sysfs_rename_dir(struct kobject *kobj, const char *new_name);
+int __must_check sysfs_move_dir(struct kobject *kobj,
+				struct kobject *new_parent_kobj);
 
-extern int __must_check
-sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, mode_t mode);
-
-extern void
-sysfs_remove_file(struct kobject *, const struct attribute *);
-
-extern int __must_check
-sysfs_create_link(struct kobject * kobj, struct kobject * target, const char * name);
-
-extern void
-sysfs_remove_link(struct kobject *, const char * name);
+int __must_check sysfs_create_file(struct kobject *kobj,
+				   const struct attribute *attr);
+int __must_check sysfs_chmod_file(struct kobject *kobj, struct attribute *attr,
+				  mode_t mode);
+void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr);
 
 int __must_check sysfs_create_bin_file(struct kobject *kobj,
-					struct bin_attribute *attr);
+				       struct bin_attribute *attr);
 void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr);
 
-int __must_check sysfs_create_group(struct kobject *,
-					const struct attribute_group *);
-void sysfs_remove_group(struct kobject *, const struct attribute_group *);
+int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target,
+				   const char *name);
+void sysfs_remove_link(struct kobject *kobj, const char *name);
+
+int __must_check sysfs_create_group(struct kobject *kobj,
+				    const struct attribute_group *grp);
+void sysfs_remove_group(struct kobject *kobj,
+			const struct attribute_group *grp);
 int sysfs_add_file_to_group(struct kobject *kobj,
-		const struct attribute *attr, const char *group);
+			const struct attribute *attr, const char *group);
 void sysfs_remove_file_from_group(struct kobject *kobj,
-		const struct attribute *attr, const char *group);
-
-void sysfs_notify(struct kobject * k, char *dir, char *attr);
-
+			const struct attribute *attr, const char *group);
 
-extern int sysfs_make_shadowed_dir(struct kobject *kobj,
-	void * (*follow_link)(struct dentry *, struct nameidata *));
-extern struct sysfs_dirent *sysfs_create_shadow_dir(struct kobject *kobj);
-extern void sysfs_remove_shadow_dir(struct sysfs_dirent *shadow_sd);
+void sysfs_notify(struct kobject *kobj, char *dir, char *attr);
 
 extern int __must_check sysfs_init(void);
 
@@ -154,75 +122,76 @@ static inline int sysfs_schedule_callback(struct kobject *kobj,
 	return -ENOSYS;
 }
 
-static inline int sysfs_create_dir(struct kobject *kobj,
-				   struct sysfs_dirent *shadow_parent_sd)
+static inline int sysfs_create_dir(struct kobject *kobj)
 {
 	return 0;
 }
 
-static inline void sysfs_remove_dir(struct kobject * k)
+static inline void sysfs_remove_dir(struct kobject *kobj)
 {
 	;
 }
 
-static inline int sysfs_rename_dir(struct kobject *kobj,
-				   struct sysfs_dirent *new_parent_sd,
-				   const char *new_name)
+static inline int sysfs_rename_dir(struct kobject *kobj, const char *new_name)
 {
 	return 0;
 }
 
-static inline int sysfs_move_dir(struct kobject * k, struct kobject * new_parent)
+static inline int sysfs_move_dir(struct kobject *kobj,
+				 struct kobject *new_parent_kobj)
 {
 	return 0;
 }
 
-static inline int sysfs_create_file(struct kobject * k, const struct attribute * a)
+static inline int sysfs_create_file(struct kobject *kobj,
+				    const struct attribute *attr)
 {
 	return 0;
 }
 
-static inline int sysfs_update_file(struct kobject * k, const struct attribute * a)
-{
-	return 0;
-}
-static inline int sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, mode_t mode)
+static inline int sysfs_chmod_file(struct kobject *kobj,
+				   struct attribute *attr, mode_t mode)
 {
 	return 0;
 }
 
-static inline void sysfs_remove_file(struct kobject * k, const struct attribute * a)
+static inline void sysfs_remove_file(struct kobject *kobj,
+				     const struct attribute *attr)
 {
 	;
 }
 
-static inline int sysfs_create_link(struct kobject * k, struct kobject * t, const char * n)
+static inline int sysfs_create_bin_file(struct kobject *kobj,
+					struct bin_attribute *attr)
 {
 	return 0;
 }
 
-static inline void sysfs_remove_link(struct kobject * k, const char * name)
+static inline int sysfs_remove_bin_file(struct kobject *kobj,
+					struct bin_attribute *attr)
 {
-	;
+	return 0;
 }
 
-
-static inline int sysfs_create_bin_file(struct kobject * k, struct bin_attribute * a)
+static inline int sysfs_create_link(struct kobject *kobj,
+				    struct kobject *target, const char *name)
 {
 	return 0;
 }
 
-static inline int sysfs_remove_bin_file(struct kobject * k, struct bin_attribute * a)
+static inline void sysfs_remove_link(struct kobject *kobj, const char *name)
 {
-	return 0;
+	;
 }
 
-static inline int sysfs_create_group(struct kobject * k, const struct attribute_group *g)
+static inline int sysfs_create_group(struct kobject *kobj,
+				     const struct attribute_group *grp)
 {
 	return 0;
 }
 
-static inline void sysfs_remove_group(struct kobject * k, const struct attribute_group * g)
+static inline void sysfs_remove_group(struct kobject *kobj,
+				      const struct attribute_group *grp)
 {
 	;
 }
@@ -238,14 +207,8 @@ static inline void sysfs_remove_file_from_group(struct kobject *kobj,
 {
 }
 
-static inline void sysfs_notify(struct kobject * k, char *dir, char *attr)
-{
-}
-
-static inline int sysfs_make_shadowed_dir(struct kobject *kobj,
-	void * (*follow_link)(struct dentry *, struct nameidata *))
+static inline void sysfs_notify(struct kobject *kobj, char *dir, char *attr)
 {
-	return 0;
 }
 
 static inline int __must_check sysfs_init(void)
diff --git a/include/linux/tc_act/tc_nat.h b/include/linux/tc_act/tc_nat.h
new file mode 100644
index 00000000000..e7cf31e8ba7
--- /dev/null
+++ b/include/linux/tc_act/tc_nat.h
@@ -0,0 +1,29 @@
+#ifndef __LINUX_TC_NAT_H
+#define __LINUX_TC_NAT_H
+
+#include <linux/pkt_cls.h>
+#include <linux/types.h>
+
+#define TCA_ACT_NAT 9
+
+enum
+{
+	TCA_NAT_UNSPEC,
+	TCA_NAT_PARMS,
+	TCA_NAT_TM,
+	__TCA_NAT_MAX
+};
+#define TCA_NAT_MAX (__TCA_NAT_MAX - 1)
+
+#define TCA_NAT_FLAG_EGRESS 1
+
+struct tc_nat
+{
+	tc_gen;
+	__be32 old_addr;
+	__be32 new_addr;
+	__be32 mask;
+	__u32 flags;
+};
+
+#endif
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index c6b9f92e828..c5b94c1a5ee 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -304,7 +304,6 @@ struct tcp_sock {
 	u32	rtt_seq;	/* sequence number to update rttvar	*/
 
 	u32	packets_out;	/* Packets which are "in flight"	*/
-	u32	left_out;	/* Packets which leaved network	*/
 	u32	retrans_out;	/* Retransmitted packets out		*/
 /*
  *      Options received (usually on last packet, some only on SYN packets).
@@ -333,6 +332,9 @@ struct tcp_sock {
 
 	struct tcp_sack_block_wire recv_sack_cache[4];
 
+	u32	highest_sack;	/* Start seq of globally highest revd SACK
+				 * (validity guaranteed only if sacked_out > 0) */
+
 	/* from STCP, retrans queue hinting */
 	struct sk_buff* lost_skb_hint;
 
@@ -341,10 +343,12 @@ struct tcp_sock {
 	struct sk_buff *forward_skb_hint;
 	struct sk_buff *fastpath_skb_hint;
 
-	int     fastpath_cnt_hint;
+	int     fastpath_cnt_hint;	/* Lags behind by current skb's pcount
+					 * compared to respective fackets_out */
 	int     lost_cnt_hint;
 	int     retransmit_cnt_hint;
-	int     forward_cnt_hint;
+
+	u32	lost_retrans_low;	/* Sent seq after any rxmit (lowest) */
 
 	u16	advmss;		/* Advertised MSS			*/
 	u16	prior_ssthresh; /* ssthresh saved at recovery start	*/
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6570719eafd..60478f6e5dc 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -21,7 +21,6 @@
  * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
  * hardcoded at present.)
  */
-#define NR_PTYS	CONFIG_LEGACY_PTY_COUNT   /* Number of legacy ptys */
 #define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
 #define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
 #define NR_LDISCS		17
diff --git a/include/linux/umem.h b/include/linux/umem.h
deleted file mode 100644
index f36ebfc32bf..00000000000
--- a/include/linux/umem.h
+++ /dev/null
@@ -1,138 +0,0 @@
-
-/*
- * This file contains defines for the
- *   Micro Memory MM5415
- * family PCI Memory Module with Battery Backup.
- *
- * Copyright Micro Memory INC 2001.  All rights reserved.
- * Release under the terms of the GNU GENERAL PUBLIC LICENSE version 2.
- * See the file COPYING.
- */
-
-#ifndef _DRIVERS_BLOCK_MM_H
-#define _DRIVERS_BLOCK_MM_H
-
-
-#define IRQ_TIMEOUT (1 * HZ)
-
-/* CSR register definition */
-#define MEMCTRLSTATUS_MAGIC	0x00
-#define  MM_MAGIC_VALUE		(unsigned char)0x59
-
-#define MEMCTRLSTATUS_BATTERY	0x04
-#define  BATTERY_1_DISABLED	0x01
-#define  BATTERY_1_FAILURE	0x02
-#define  BATTERY_2_DISABLED	0x04
-#define  BATTERY_2_FAILURE	0x08
-
-#define MEMCTRLSTATUS_MEMORY	0x07
-#define  MEM_128_MB		0xfe
-#define  MEM_256_MB		0xfc
-#define  MEM_512_MB		0xf8
-#define  MEM_1_GB		0xf0
-#define  MEM_2_GB		0xe0
-
-#define MEMCTRLCMD_LEDCTRL	0x08
-#define  LED_REMOVE		2
-#define  LED_FAULT		4
-#define  LED_POWER		6
-#define	 LED_FLIP		255
-#define  LED_OFF		0x00
-#define  LED_ON			0x01
-#define  LED_FLASH_3_5		0x02
-#define  LED_FLASH_7_0		0x03
-#define  LED_POWER_ON		0x00
-#define  LED_POWER_OFF		0x01
-#define  USER_BIT1		0x01
-#define  USER_BIT2		0x02
-
-#define MEMORY_INITIALIZED	USER_BIT1
-
-#define MEMCTRLCMD_ERRCTRL	0x0C
-#define  EDC_NONE_DEFAULT	0x00
-#define  EDC_NONE		0x01
-#define  EDC_STORE_READ		0x02
-#define  EDC_STORE_CORRECT	0x03
-
-#define MEMCTRLCMD_ERRCNT	0x0D
-#define MEMCTRLCMD_ERRSTATUS	0x0E
-
-#define ERROR_DATA_LOG		0x20
-#define ERROR_ADDR_LOG		0x28
-#define ERROR_COUNT		0x3D
-#define ERROR_SYNDROME		0x3E
-#define ERROR_CHECK		0x3F
-
-#define DMA_PCI_ADDR		0x40
-#define DMA_LOCAL_ADDR		0x48
-#define DMA_TRANSFER_SIZE	0x50
-#define DMA_DESCRIPTOR_ADDR	0x58
-#define DMA_SEMAPHORE_ADDR	0x60
-#define DMA_STATUS_CTRL		0x68
-#define  DMASCR_GO		0x00001
-#define  DMASCR_TRANSFER_READ	0x00002
-#define  DMASCR_CHAIN_EN	0x00004
-#define  DMASCR_SEM_EN		0x00010
-#define  DMASCR_DMA_COMP_EN	0x00020
-#define  DMASCR_CHAIN_COMP_EN	0x00040
-#define  DMASCR_ERR_INT_EN	0x00080
-#define  DMASCR_PARITY_INT_EN	0x00100
-#define  DMASCR_ANY_ERR		0x00800
-#define  DMASCR_MBE_ERR		0x01000
-#define  DMASCR_PARITY_ERR_REP	0x02000
-#define  DMASCR_PARITY_ERR_DET	0x04000
-#define  DMASCR_SYSTEM_ERR_SIG	0x08000
-#define  DMASCR_TARGET_ABT	0x10000
-#define  DMASCR_MASTER_ABT	0x20000
-#define  DMASCR_DMA_COMPLETE	0x40000
-#define  DMASCR_CHAIN_COMPLETE	0x80000
-
-/* 
-3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE 
-READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA 
-TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE 
-TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS 
-(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6, 
-AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING 
-DMA READ OPERATIONS.
-*/
-#define        DMASCR_READ   0x60000000
-#define        DMASCR_READLINE   0xE0000000
-#define        DMASCR_READMULTI   0xC0000000
-
-
-#define DMASCR_ERROR_MASK	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR | DMASCR_ANY_ERR)
-#define DMASCR_HARD_ERROR	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR)
-
-#define WINDOWMAP_WINNUM	0x7B
-
-#define DMA_READ_FROM_HOST 0
-#define DMA_WRITE_TO_HOST 1
-
-struct mm_dma_desc {
-	__le64	pci_addr;
-	__le64	local_addr;
-	__le32	transfer_size;
-	u32	zero1;
-	__le64	next_desc_addr;
-	__le64	sem_addr;
-	__le32	control_bits;
-	u32	zero2;
-
-	dma_addr_t data_dma_handle;
-
-	/* Copy of the bits */
-	__le64	sem_control_bits;
-} __attribute__((aligned(8)));
-
-#define PCI_VENDOR_ID_MICRO_MEMORY		0x1332
-#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN	0x5415
-#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN	0x5425
-#define PCI_DEVICE_ID_MICRO_MEMORY_6155		0x6155
-
-/* bits for card->flags */
-#define UM_FLAG_DMA_IN_REGS		1
-#define UM_FLAG_NO_BYTE_STATUS		2
-#define UM_FLAG_NO_BATTREG		4
-#define	UM_FLAG_NO_BATT			8
-#endif
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 4f33a58fa9d..c5c8f169d3c 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -52,6 +52,7 @@ struct ep_device;
  * @ep_dev: ep_device for sysfs info
  * @extra: descriptors following this endpoint in the configuration
  * @extralen: how many bytes of "extra" are valid
+ * @enabled: URBs may be submitted to this endpoint
  *
  * USB requests are always queued to a given endpoint, identified by a
  * descriptor within an active interface in a given USB configuration.
@@ -64,6 +65,7 @@ struct usb_host_endpoint {
 
 	unsigned char *extra;   /* Extra descriptors */
 	int extralen;
+	int enabled;
 };
 
 /* host-side wrapper for one interface setting's parsed descriptors */
@@ -344,6 +346,11 @@ struct usb_tt;
  *
  * Usbcore drivers should not set usbdev->state directly.  Instead use
  * usb_set_device_state().
+ *
+ * @authorized: (user space) policy determines if we authorize this
+ *              device to be used or not. By default, wired USB
+ *              devices are authorized. WUSB devices are not, until we
+ *              authorize them from user space. FIXME -- complete doc
  */
 struct usb_device {
 	int		devnum;		/* Address on USB bus */
@@ -376,8 +383,11 @@ struct usb_device {
 	u8 portnum;			/* Parent port number (origin 1) */
 	u8 level;			/* Number of USB hub ancestors */
 
+	unsigned can_submit:1;		/* URBs may be submitted */
 	unsigned discon_suspended:1;	/* Disconnected while suspended */
 	unsigned have_langid:1;		/* whether string_langid is valid */
+	unsigned authorized:1;		/* Policy has determined we can use it */
+	unsigned wusb:1;		/* Device is Wireless USB */
 	int string_langid;		/* language ID for strings */
 
 	/* static strings from the device */
@@ -405,6 +415,7 @@ struct usb_device {
 
 	int pm_usage_cnt;		/* usage counter for autosuspend */
 	u32 quirks;			/* quirks of the whole device */
+	atomic_t urbnum;		/* number of URBs submitted for the whole device */
 
 #ifdef CONFIG_PM
 	struct delayed_work autosuspend; /* for delayed autosuspends */
@@ -419,6 +430,7 @@ struct usb_device {
 	unsigned persist_enabled:1;	/* USB_PERSIST enabled for this dev */
 	unsigned autosuspend_disabled:1; /* autosuspend and autoresume */
 	unsigned autoresume_disabled:1;  /*  disabled by the user */
+	unsigned skip_sys_resume:1;	/* skip the next system resume */
 #endif
 };
 #define	to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -555,6 +567,29 @@ static inline int usb_make_path (struct usb_device *dev, char *buf,
 /*-------------------------------------------------------------------------*/
 
 /**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
  * usb_endpoint_dir_in - check if the endpoint has IN direction
  * @epd: endpoint to be checked
  *
@@ -996,6 +1031,8 @@ extern int usb_disabled(void);
 
 /*
  * urb->transfer_flags:
+ *
+ * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
  */
 #define URB_SHORT_NOT_OK	0x0001	/* report short reads as errors */
 #define URB_ISO_ASAP		0x0002	/* iso-only, urb->start_frame
@@ -1008,6 +1045,10 @@ extern int usb_disabled(void);
 					 * needed */
 #define URB_FREE_BUFFER		0x0100	/* Free transfer buffer with the URB */
 
+#define URB_DIR_IN		0x0200	/* Transfer from device to host */
+#define URB_DIR_OUT		0
+#define URB_DIR_MASK		URB_DIR_IN
+
 struct usb_iso_packet_descriptor {
 	unsigned int offset;
 	unsigned int length;		/* expected length */
@@ -1037,6 +1078,8 @@ typedef void (*usb_complete_t)(struct urb *);
  * @urb_list: For use by current owner of the URB.
  * @anchor_list: membership in the list of an anchor
  * @anchor: to anchor URBs to a common mooring
+ * @ep: Points to the endpoint's data structure.  Will eventually
+ *	replace @pipe.
  * @pipe: Holds endpoint number, direction, type, and more.
  *	Create these values with the eight macros available;
  *	usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
@@ -1201,10 +1244,10 @@ struct urb
 {
 	/* private: usb core and host controller only fields in the urb */
 	struct kref kref;		/* reference count of the URB */
-	spinlock_t lock;		/* lock for the URB */
 	void *hcpriv;			/* private data for host controller */
 	atomic_t use_count;		/* concurrent submissions counter */
 	u8 reject;			/* submissions will fail */
+	int unlinked;			/* unlink error code */
 
 	/* public: documented fields in the urb that can be used by drivers */
 	struct list_head urb_list;	/* list head for use by the urb's
@@ -1212,6 +1255,7 @@ struct urb
 	struct list_head anchor_list;	/* the URB may be anchored by the driver */
 	struct usb_anchor *anchor;
 	struct usb_device *dev; 	/* (in) pointer to associated device */
+	struct usb_host_endpoint *ep;	/* (internal) pointer to endpoint struct */
 	unsigned int pipe;		/* (in) pipe information */
 	int status;			/* (return) non-ISO status */
 	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
@@ -1257,7 +1301,6 @@ static inline void usb_fill_control_urb (struct urb *urb,
 					 usb_complete_t complete_fn,
 					 void *context)
 {
-	spin_lock_init(&urb->lock);
 	urb->dev = dev;
 	urb->pipe = pipe;
 	urb->setup_packet = setup_packet;
@@ -1288,7 +1331,6 @@ static inline void usb_fill_bulk_urb (struct urb *urb,
 				      usb_complete_t complete_fn,
 				      void *context)
 {
-	spin_lock_init(&urb->lock);
 	urb->dev = dev;
 	urb->pipe = pipe;
 	urb->transfer_buffer = transfer_buffer;
@@ -1324,7 +1366,6 @@ static inline void usb_fill_int_urb (struct urb *urb,
 				     void *context,
 				     int interval)
 {
-	spin_lock_init(&urb->lock);
 	urb->dev = dev;
 	urb->pipe = pipe;
 	urb->transfer_buffer = transfer_buffer;
@@ -1352,6 +1393,30 @@ extern void usb_unanchor_urb(struct urb *urb);
 extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
 					 unsigned int timeout);
 
+/**
+ * usb_urb_dir_in - check if an URB describes an IN transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an IN transfer (device-to-host),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_in(struct urb *urb)
+{
+	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN;
+}
+
+/**
+ * usb_urb_dir_out - check if an URB describes an OUT transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an OUT transfer (host-to-device),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_out(struct urb *urb)
+{
+	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
+}
+
 void *usb_buffer_alloc (struct usb_device *dev, size_t size,
 	gfp_t mem_flags, dma_addr_t *dma);
 void usb_buffer_free (struct usb_device *dev, size_t size,
@@ -1364,13 +1429,13 @@ void usb_buffer_unmap (struct urb *urb);
 #endif
 
 struct scatterlist;
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
 		      struct scatterlist *sg, int nents);
 #if 0
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
 			   struct scatterlist *sg, int n_hw_ents);
 #endif
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
 			 struct scatterlist *sg, int n_hw_ents);
 
 /*-------------------------------------------------------------------*
diff --git a/include/linux/usb_gadget.h b/include/linux/usb/gadget.h
index 4f59b2aa8a9..46705e91573 100644
--- a/include/linux/usb_gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1,5 +1,5 @@
 /*
- * <linux/usb_gadget.h>
+ * <linux/usb/gadget.h>
  *
  * We call the USB code inside a Linux-based peripheral device a "gadget"
  * driver, except for the hardware-specific bus glue.  One USB host can
@@ -22,10 +22,10 @@ struct usb_ep;
 /**
  * struct usb_request - describes one i/o request
  * @buf: Buffer used for data.  Always provide this; some controllers
- * 	only use PIO, or don't use DMA for some endpoints.
+ *	only use PIO, or don't use DMA for some endpoints.
  * @dma: DMA address corresponding to 'buf'.  If you don't set this
- * 	field, and the usb controller needs one, it is responsible
- * 	for mapping and unmapping the buffer.
+ *	field, and the usb controller needs one, it is responsible
+ *	for mapping and unmapping the buffer.
  * @length: Length of that data
  * @no_interrupt: If true, hints that no completion irq is needed.
  *	Helpful sometimes with deep request queues that are handled
@@ -45,16 +45,16 @@ struct usb_ep;
  * @context: For use by the completion callback
  * @list: For use by the gadget driver.
  * @status: Reports completion code, zero or a negative errno.
- * 	Normally, faults block the transfer queue from advancing until
- * 	the completion callback returns.
- * 	Code "-ESHUTDOWN" indicates completion caused by device disconnect,
- * 	or when the driver disabled the endpoint.
+ *	Normally, faults block the transfer queue from advancing until
+ *	the completion callback returns.
+ *	Code "-ESHUTDOWN" indicates completion caused by device disconnect,
+ *	or when the driver disabled the endpoint.
  * @actual: Reports bytes transferred to/from the buffer.  For reads (OUT
- * 	transfers) this may be less than the requested length.  If the
- * 	short_not_ok flag is set, short reads are treated as errors
- * 	even when status otherwise indicates successful completion.
- * 	Note that for writes (IN transfers) some data bytes may still
- * 	reside in a device-side FIFO when the request is reported as
+ *	transfers) this may be less than the requested length.  If the
+ *	short_not_ok flag is set, short reads are treated as errors
+ *	even when status otherwise indicates successful completion.
+ *	Note that for writes (IN transfers) some data bytes may still
+ *	reside in a device-side FIFO when the request is reported as
  *	complete.
  *
  * These are allocated/freed through the endpoint they're used with.  The
@@ -128,7 +128,7 @@ struct usb_ep_ops {
  *	value can sometimes be reduced (hardware allowing), according to
  *      the endpoint descriptor used to configure the endpoint.
  * @driver_data:for use by the gadget driver.  all other fields are
- * 	read-only to gadget drivers.
+ *	read-only to gadget drivers.
  *
  * the bus controller driver lists all the general purpose endpoints in
  * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,
@@ -148,10 +148,10 @@ struct usb_ep {
 /**
  * usb_ep_enable - configure endpoint, making it usable
  * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
- * 	drivers discover endpoints through the ep_list of a usb_gadget.
+ *	drivers discover endpoints through the ep_list of a usb_gadget.
  * @desc:descriptor for desired behavior.  caller guarantees this pointer
- * 	remains valid until the endpoint is disabled; the data byte order
- * 	is little-endian (usb-standard).
+ *	remains valid until the endpoint is disabled; the data byte order
+ *	is little-endian (usb-standard).
  *
  * when configurations are set, or when interface settings change, the driver
  * will enable or disable the relevant endpoints.  while it is enabled, an
@@ -232,7 +232,7 @@ usb_ep_free_request (struct usb_ep *ep, struct usb_request *req)
  * @ep:the endpoint associated with the request
  * @req:the request being submitted
  * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
- * 	pre-allocate all necessary memory with the request.
+ *	pre-allocate all necessary memory with the request.
  *
  * This tells the device controller to perform the specified request through
  * that endpoint (reading or writing a buffer).  When the request completes,
@@ -415,7 +415,7 @@ struct usb_gadget_ops {
  * struct usb_gadget - represents a usb slave device
  * @ops: Function pointers used to access hardware-specific operations.
  * @ep0: Endpoint zero, used when reading or writing responses to
- * 	driver setup() requests
+ *	driver setup() requests
  * @ep_list: List of other endpoints supported by the device.
  * @speed: Speed of current connection to USB host.
  * @is_dualspeed: True if the controller supports both high and full speed
@@ -432,7 +432,7 @@ struct usb_gadget_ops {
  * @b_hnp_enable: OTG device feature flag, indicating that the A-Host
  *	enabled HNP support.
  * @name: Identifies the controller hardware type.  Used in diagnostics
- * 	and sometimes configuration.
+ *	and sometimes configuration.
  * @dev: Driver model state for this abstract device.
  *
  * Gadgets have a mostly-portable "gadget driver" implementing device
@@ -480,6 +480,39 @@ static inline void *get_gadget_data (struct usb_gadget *gadget)
 
 
 /**
+ * gadget_is_dualspeed - return true iff the hardware handles high speed
+ * @gadget: controller that might support both high and full speeds
+ */
+static inline int gadget_is_dualspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+	/* runtime test would check "g->is_dualspeed" ... that might be
+	 * useful to work around hardware bugs, but is mostly pointless
+	 */
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * gadget_is_otg - return true iff the hardware is OTG-ready
+ * @gadget: controller that might have a Mini-AB connector
+ *
+ * This is a runtime test, since kernels with a USB-OTG stack sometimes
+ * run on boards which only have a Mini-B (or Mini-A) connector.
+ */
+static inline int gadget_is_otg(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_OTG
+	return g->is_otg;
+#else
+	return 0;
+#endif
+}
+
+
+/**
  * usb_gadget_frame_number - returns the current frame number
  * @gadget: controller that reports the frame number
  *
@@ -655,23 +688,23 @@ usb_gadget_disconnect (struct usb_gadget *gadget)
  * @function: String describing the gadget's function
  * @speed: Highest speed the driver handles.
  * @bind: Invoked when the driver is bound to a gadget, usually
- * 	after registering the driver.
- * 	At that point, ep0 is fully initialized, and ep_list holds
- * 	the currently-available endpoints.
- * 	Called in a context that permits sleeping.
+ *	after registering the driver.
+ *	At that point, ep0 is fully initialized, and ep_list holds
+ *	the currently-available endpoints.
+ *	Called in a context that permits sleeping.
  * @setup: Invoked for ep0 control requests that aren't handled by
- * 	the hardware level driver. Most calls must be handled by
- * 	the gadget driver, including descriptor and configuration
- * 	management.  The 16 bit members of the setup data are in
- * 	USB byte order. Called in_interrupt; this may not sleep.  Driver
+ *	the hardware level driver. Most calls must be handled by
+ *	the gadget driver, including descriptor and configuration
+ *	management.  The 16 bit members of the setup data are in
+ *	USB byte order. Called in_interrupt; this may not sleep.  Driver
  *	queues a response to ep0, or returns negative to stall.
  * @disconnect: Invoked after all transfers have been stopped,
- * 	when the host is disconnected.  May be called in_interrupt; this
- * 	may not sleep.  Some devices can't detect disconnect, so this might
+ *	when the host is disconnected.  May be called in_interrupt; this
+ *	may not sleep.  Some devices can't detect disconnect, so this might
  *	not be called except as part of controller shutdown.
  * @unbind: Invoked when the driver is unbound from a gadget,
- * 	usually from rmmod (after a disconnect is reported).
- * 	Called in a context that permits sleeping.
+ *	usually from rmmod (after a disconnect is reported).
+ *	Called in a context that permits sleeping.
  * @suspend: Invoked on USB suspend.  May be called in_interrupt.
  * @resume: Invoked on USB resume.  May be called in_interrupt.
  * @driver: Driver model state for this driver.
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 8da374caf58..2692ec9389c 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -4,11 +4,8 @@
  * belong here.
  */
 
-/* device must not be autosuspended */
-#define USB_QUIRK_NO_AUTOSUSPEND	0x00000001
-
 /* string descriptors must not be fetched using a 255-byte read */
-#define USB_QUIRK_STRING_FETCH_255	0x00000002
+#define USB_QUIRK_STRING_FETCH_255	0x00000001
 
 /* device can't resume correctly so reset it instead */
-#define USB_QUIRK_RESET_RESUME		0x00000004
+#define USB_QUIRK_RESET_RESUME		0x00000002
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index e8b8928232c..488ce128885 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -141,7 +141,7 @@ struct usb_serial {
 };
 #define to_usb_serial(d) container_of(d, struct usb_serial, kref)
 
-#define NUM_DONT_CARE	(-1)
+#define NUM_DONT_CARE	99
 
 /* get and set the serial private data pointer helper functions */
 static inline void *usb_get_serial_data (struct usb_serial *serial)
@@ -160,12 +160,18 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
  *	in the syslog messages when a device is inserted or removed.
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
- * @num_interrupt_in: the number of interrupt in endpoints this device will
- *	have.
- * @num_interrupt_out: the number of interrupt out endpoints this device will
- *	have.
- * @num_bulk_in: the number of bulk in endpoints this device will have.
- * @num_bulk_out: the number of bulk out endpoints this device will have.
+ * @num_interrupt_in: If a device doesn't have this many interrupt-in
+ *	endpoints, it won't be sent to the driver's attach() method.
+ *	(But it might still be sent to the probe() method.)
+ * @num_interrupt_out: If a device doesn't have this many interrupt-out
+ *	endpoints, it won't be sent to the driver's attach() method.
+ *	(But it might still be sent to the probe() method.)
+ * @num_bulk_in: If a device doesn't have this many bulk-in
+ *	endpoints, it won't be sent to the driver's attach() method.
+ *	(But it might still be sent to the probe() method.)
+ * @num_bulk_out: If a device doesn't have this many bulk-out
+ *	endpoints, it won't be sent to the driver's attach() method.
+ *	(But it might still be sent to the probe() method.)
  * @num_ports: the number of different ports this device will have.
  * @calc_num_ports: pointer to a function to determine how many ports this
  *	device has dynamically.  It will be called after the probe()
diff --git a/include/linux/usb_sl811.h b/include/linux/usb_sl811.h
deleted file mode 100644
index 4f2d012d730..00000000000
--- a/include/linux/usb_sl811.h
+++ /dev/null
@@ -1,26 +0,0 @@
-
-/*
- * board initialization should put one of these into dev->platform_data
- * and place the sl811hs onto platform_bus named "sl811-hcd".
- */
-
-struct sl811_platform_data {
-	unsigned	can_wakeup:1;
-
-	/* given port_power, msec/2 after power on till power good */
-	u8		potpg;
-
-	/* mA/2 power supplied on this port (max = default = 250) */
-	u8		power;
-
-	/* sl811 relies on an external source of VBUS current */
-	void 		(*port_power)(struct device *dev, int is_on);
-
-	/* pulse sl811 nRST (probably with a GPIO) */
-	void 		(*reset)(struct device *dev);
-
-	// some boards need something like these:
- 	// int 		(*check_overcurrent)(struct device *dev);
- 	// void 	(*clock_enable)(struct device *dev, int is_on);
-};
-
diff --git a/include/linux/video_output.h b/include/linux/video_output.h
index e63e0c03ee0..2fb46bc9340 100644
--- a/include/linux/video_output.h
+++ b/include/linux/video_output.h
@@ -31,9 +31,9 @@ struct output_properties {
 struct output_device {
 	int request_state;
 	struct output_properties *props;
-	struct class_device class_dev;
+	struct device dev;
 };
-#define to_output_device(obj) container_of(obj, struct output_device, class_dev)
+#define to_output_device(obj) container_of(obj, struct output_device, dev)
 struct output_device *video_output_register(const char *name,
 	struct device *dev,
 	void *devdata,
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ae9b24c12f6..1f503e94eff 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -271,6 +271,7 @@ struct v4l2_pix_format
 
 /*      Pixel format         FOURCC                        depth  Description  */
 #define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R','G','B','1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R','4','4','4') /* 16  xxxxrrrr ggggbbbb */
 #define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R','G','B','O') /* 16  RGB-5-5-5     */
 #define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R','G','B','P') /* 16  RGB-5-6-5     */
 #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16  RGB-5-5-5 BE  */
@@ -280,6 +281,7 @@ struct v4l2_pix_format
 #define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B','G','R','4') /* 32  BGR-8-8-8-8   */
 #define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R','G','B','4') /* 32  RGB-8-8-8-8   */
 #define V4L2_PIX_FMT_GREY    v4l2_fourcc('G','R','E','Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P','A','L','8') /*  8  8-bit palette */
 #define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y','V','U','9') /*  9  YVU 4:1:0     */
 #define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y','V','1','2') /* 12  YVU 4:2:0     */
 #define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y','U','Y','V') /* 16  YUV 4:2:2     */
@@ -287,6 +289,10 @@ struct v4l2_pix_format
 #define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16  YVU422 planar */
 #define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16  YVU411 planar */
 #define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y','4','1','P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y','4','4','4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y','U','V','O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y','U','V','P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y','U','V','4') /* 32  YUV-8-8-8-8   */
 
 /* two planes -- one Y, one Cr + Cb interleaved  */
 #define V4L2_PIX_FMT_NV12    v4l2_fourcc('N','V','1','2') /* 12  Y/CbCr 4:2:0  */
@@ -298,7 +304,6 @@ struct v4l2_pix_format
 #define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y','Y','U','V') /* 16  YUV 4:2:2     */
 #define V4L2_PIX_FMT_HI240   v4l2_fourcc('H','I','2','4') /*  8  8-bit color   */
 #define V4L2_PIX_FMT_HM12    v4l2_fourcc('H','M','1','2') /*  8  YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R','4','4','4') /* 16  xxxxrrrr ggggbbbb */
 
 /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
 #define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B','A','8','1') /*  8  BGBG.. GRGR.. */
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index b4af6bcb7b7..c7c3337c3a8 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -5,6 +5,7 @@
 #define WRITEBACK_H
 
 #include <linux/sched.h>
+#include <linux/fs.h>
 
 struct backing_dev_info;
 
diff --git a/include/linux/xilinxfb.h b/include/linux/xilinxfb.h
new file mode 100644
index 00000000000..f2463f559fb
--- /dev/null
+++ b/include/linux/xilinxfb.h
@@ -0,0 +1,30 @@
+/*
+ * Platform device data for Xilinx Framebuffer device
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __XILINXFB_H__
+#define __XILINXFB_H__
+
+#include <linux/types.h>
+
+/* ML300/403 reference design framebuffer driver platform data struct */
+struct xilinxfb_platform_data {
+	u32 rotate_screen;	/* Flag to rotate display 180 degrees */
+	u32 screen_height_mm;	/* Physical dimentions of screen in mm */
+	u32 screen_width_mm;
+	u32 xres, yres;		/* resolution of screen in pixels */
+	u32 xvirt, yvirt;	/* resolution of memory buffer */
+
+	/* Physical address of framebuffer memory; If non-zero, driver
+	 * will use provided memory address instead of allocating one from
+	 * the consistent pool. */
+	u32 fb_phys;
+};
+
+#endif  /* __XILINXFB_H__ */
diff --git a/include/linux/zlib.h b/include/linux/zlib.h
index 9e3192a7dc6..40c49cb3eb5 100644
--- a/include/linux/zlib.h
+++ b/include/linux/zlib.h
@@ -82,7 +82,7 @@
 struct internal_state;
 
 typedef struct z_stream_s {
-    Byte    *next_in;   /* next input byte */
+    const Byte *next_in;   /* next input byte */
     uInt     avail_in;  /* number of bytes available at next_in */
     uLong    total_in;  /* total nb of input bytes read so far */
 
@@ -699,4 +699,8 @@ extern int zlib_inflateInit2(z_streamp strm, int  windowBits);
     struct internal_state {int dummy;}; /* hack for buggy compilers */
 #endif
 
+/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
+ * return len or negative error code. */
+extern int zlib_inflate_blob(void *dst, unsigned dst_sz, const void *src, unsigned src_sz);
+
 #endif /* _ZLIB_H */