powerpc/QE: switch to the cpm_muram implementation

This is very trivial patch. We're transitioning to the cpm_muram_*
calls. That's it.

Less trivial changes:
- BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines
  we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_*
  prototypes;
- qe_muram_dump was unused and thus removed;
- added some code to the cpm_common.c to support legacy QE bindings
  (data-only node name).
- For convenience, define qe_* calls to cpm_*. So drivers need not to be
  changed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 9 insertions, 28 deletions

diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index ede38ffe466..63a55337c2d 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -96,6 +96,7 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
 int cpm_muram_free(unsigned long offset);
 unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
 void __iomem *cpm_muram_addr(unsigned long offset);
+unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
 int cpm_command(u32 command, u8 opcode);
 
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index 01e3c70b93a..80807fd6a70 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -17,6 +17,7 @@
 #ifdef __KERNEL__
 
 #include <linux/spinlock.h>
+#include <asm/cpm.h>
 #include <asm/immap_qe.h>
 
 #define QE_NUM_OF_SNUM	28
@@ -119,20 +120,13 @@ unsigned int qe_get_brg_clk(void);
 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
-unsigned long qe_muram_alloc(int size, int align);
-int qe_muram_free(unsigned long offset);
-unsigned long qe_muram_alloc_fixed(unsigned long offset, int size);
-void qe_muram_dump(void);
-
-static inline void __iomem *qe_muram_addr(unsigned long offset)
-{
-	return (void __iomem *)&qe_immr->muram[offset];
-}
-
-static inline unsigned long qe_muram_offset(void __iomem *addr)
-{
-	return addr - (void __iomem *)qe_immr->muram;
-}
+/* we actually use cpm_muram implementation, define this for convenience */
+#define qe_muram_init cpm_muram_init
+#define qe_muram_alloc cpm_muram_alloc
+#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
+#define qe_muram_free cpm_muram_free
+#define qe_muram_addr cpm_muram_addr
+#define qe_muram_offset cpm_muram_offset
 
 /* Structure that defines QE firmware binary files.
  *
@@ -199,20 +193,6 @@ struct qe_bd {
 #define BD_STATUS_MASK	0xffff0000
 #define BD_LENGTH_MASK	0x0000ffff
 
-#define BD_SC_EMPTY	0x8000	/* Receive is empty */
-#define BD_SC_READY	0x8000	/* Transmit is ready */
-#define BD_SC_WRAP	0x2000	/* Last buffer descriptor */
-#define BD_SC_INTRPT	0x1000	/* Interrupt on change */
-#define BD_SC_LAST	0x0800	/* Last buffer in frame */
-#define BD_SC_CM	0x0200	/* Continous mode */
-#define BD_SC_ID	0x0100	/* Rec'd too many idles */
-#define BD_SC_P		0x0100	/* xmt preamble */
-#define BD_SC_BR	0x0020	/* Break received */
-#define BD_SC_FR	0x0010	/* Framing error */
-#define BD_SC_PR	0x0008	/* Parity error */
-#define BD_SC_OV	0x0002	/* Overrun */
-#define BD_SC_CD	0x0001	/* ?? */
-
 /* Alignment */
 #define QE_INTR_TABLE_ALIGN	16	/* ??? */
 #define QE_ALIGNMENT_OF_BD	8