Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (27 commits)
  Regulators: wm8400 - cleanup platform driver data handling
  Regulators: wm8994 - clean up driver data after removal
  Regulators: wm831x-xxx - clean up driver data after removal
  Regulators: pcap-regulator - clean up driver data after removal
  Regulators: max8660 - annotate probe and remove methods
  Regulators: max1586 - annotate probe and remove methods
  Regulators: lp3971 - fail if platform data was not supplied
  Regulators: tps6507x-regulator - mark probe method as __devinit
  Regulators: tps65023-regulator - mark probe method as __devinit
  Regulators: twl-regulator - mark probe function as __devinit
  Regulators: fixed - annotate probe and remove methods
  Regulators: ab3100 - fix probe and remove annotations
  Regulators: virtual - use sysfs attribute groups
  twl6030: regulator: Configure STATE register instead of REMAP
  regulator: Provide optional dummy regulator for consumers
  regulator: Assume regulators are enabled if they don't report anything
  regulator: Convert fixed voltage regulator to use enable_time()
  regulator: Add WM8994 regulator support
  regulator: enable max8649 regulator driver
  regulator: trivial: fix typos in user-visible Kconfig text
  ...

5 files changed, 57 insertions, 1 deletions

diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index 35680409b8c..94cb51a6403 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -108,6 +108,8 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
 #define	MC13783_REGU_V2		28
 #define	MC13783_REGU_V3		29
 #define	MC13783_REGU_V4		30
+#define	MC13783_REGU_PWGT1SPI	31
+#define	MC13783_REGU_PWGT2SPI	32
 
 #define MC13783_IRQ_ADCDONE	0
 #define MC13783_IRQ_ADCBISDONE	1
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 030d92255c7..28c9fd020d3 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -89,8 +89,9 @@
  * REGULATION_OUT Regulator output is out of regulation.
  * FAIL           Regulator output has failed.
  * OVER_TEMP      Regulator over temp.
- * FORCE_DISABLE  Regulator shut down by software.
+ * FORCE_DISABLE  Regulator forcibly shut down by software.
  * VOLTAGE_CHANGE Regulator voltage changed.
+ * DISABLE        Regulator was disabled.
  *
  * NOTE: These events can be OR'ed together when passed into handler.
  */
@@ -102,6 +103,7 @@
 #define REGULATOR_EVENT_OVER_TEMP		0x10
 #define REGULATOR_EVENT_FORCE_DISABLE		0x20
 #define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
+#define REGULATOR_EVENT_DISABLE 		0x80
 
 struct regulator;
 
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 31f2055eae2..592cd7c642c 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -58,6 +58,9 @@ enum regulator_status {
  * @get_optimum_mode: Get the most efficient operating mode for the regulator
  *                    when running with the specified parameters.
  *
+ * @enable_time: Time taken for the regulator voltage output voltage to
+ *               stabalise after being enabled, in microseconds.
+ *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
  *                       is suspended.
  * @set_suspend_enable: Mark the regulator as enabled when the system is
@@ -93,6 +96,9 @@ struct regulator_ops {
 	int (*set_mode) (struct regulator_dev *, unsigned int mode);
 	unsigned int (*get_mode) (struct regulator_dev *);
 
+	/* Time taken to enable the regulator */
+	int (*enable_time) (struct regulator_dev *);
+
 	/* report regulator status ... most other accessors report
 	 * control inputs, this reports results of combining inputs
 	 * from Linux (and other sources) with the actual load.
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index e94a4a1c7c8..ffd7d508e72 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -25,6 +25,7 @@ struct regulator_init_data;
  * @microvolts:		Output voltage of regulator
  * @gpio:		GPIO to use for enable control
  * 			set to -EINVAL if not used
+ * @startup_delay:	Start-up time in microseconds
  * @enable_high:	Polarity of enable GPIO
  *			1 = Active high, 0 = Active low
  * @enabled_at_boot:	Whether regulator has been enabled at
@@ -41,6 +42,7 @@ struct fixed_voltage_config {
 	const char *supply_name;
 	int microvolts;
 	int gpio;
+	unsigned startup_delay;
 	unsigned enable_high:1;
 	unsigned enabled_at_boot:1;
 	struct regulator_init_data *init_data;
diff --git a/include/linux/regulator/max8649.h b/include/linux/regulator/max8649.h
new file mode 100644
index 00000000000..417d14ecd5c
--- /dev/null
+++ b/include/linux/regulator/max8649.h
@@ -0,0 +1,44 @@
+/*
+ * Interface of Maxim max8649
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *      Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8649_H
+#define	__LINUX_REGULATOR_MAX8649_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+	MAX8649_EXTCLK_26MHZ = 0,
+	MAX8649_EXTCLK_13MHZ,
+	MAX8649_EXTCLK_19MHZ,	/* 19.2MHz */
+};
+
+enum {
+	MAX8649_RAMP_32MV = 0,
+	MAX8649_RAMP_16MV,
+	MAX8649_RAMP_8MV,
+	MAX8649_RAMP_4MV,
+	MAX8649_RAMP_2MV,
+	MAX8649_RAMP_1MV,
+	MAX8649_RAMP_0_5MV,
+	MAX8649_RAMP_0_25MV,
+};
+
+struct max8649_platform_data {
+	struct regulator_init_data *regulator;
+
+	unsigned	mode:2;		/* bit[1:0] = VID1,VID0 */
+	unsigned	extclk_freq:2;
+	unsigned	extclk:1;
+	unsigned	ramp_timing:3;
+	unsigned	ramp_down:1;
+};
+
+#endif	/* __LINUX_REGULATOR_MAX8649_H */