Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6

21 files changed, 1270 insertions, 240 deletions

diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h
index 30b023411fe..3ce3440d1b0 100644
--- a/include/asm-parisc/assembly.h
+++ b/include/asm-parisc/assembly.h
@@ -21,7 +21,9 @@
 #ifndef _PARISC_ASSEMBLY_H
 #define _PARISC_ASSEMBLY_H
 
-#ifdef __LP64__
+#define CALLEE_FLOAT_FRAME_SIZE	80
+
+#ifdef CONFIG_64BIT
 #define LDREG	ldd
 #define STREG	std
 #define LDREGX  ldd,s
@@ -30,8 +32,8 @@
 #define SHRREG  shrd
 #define RP_OFFSET	16
 #define FRAME_SIZE	128
-#define CALLEE_SAVE_FRAME_SIZE	144
-#else
+#define CALLEE_REG_FRAME_SIZE	144
+#else	/* CONFIG_64BIT */
 #define LDREG	ldw
 #define STREG	stw
 #define LDREGX  ldwx,s
@@ -40,9 +42,11 @@
 #define SHRREG  shr
 #define RP_OFFSET	20
 #define FRAME_SIZE	64
-#define CALLEE_SAVE_FRAME_SIZE	128
+#define CALLEE_REG_FRAME_SIZE	128
 #endif
 
+#define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE)
+
 #ifdef CONFIG_PA20
 #define BL		b,l
 # ifdef CONFIG_64BIT
@@ -300,9 +304,35 @@
 	fldd,mb	-8(\regs),       %fr0
 	.endm
 
+	.macro	callee_save_float
+	fstd,ma	 %fr12,	8(%r30)
+	fstd,ma	 %fr13,	8(%r30)
+	fstd,ma	 %fr14,	8(%r30)
+	fstd,ma	 %fr15,	8(%r30)
+	fstd,ma	 %fr16,	8(%r30)
+	fstd,ma	 %fr17,	8(%r30)
+	fstd,ma	 %fr18,	8(%r30)
+	fstd,ma	 %fr19,	8(%r30)
+	fstd,ma	 %fr20,	8(%r30)
+	fstd,ma	 %fr21,	8(%r30)
+	.endm
+
+	.macro	callee_rest_float
+	fldd,mb	-8(%r30),   %fr21
+	fldd,mb	-8(%r30),   %fr20
+	fldd,mb	-8(%r30),   %fr19
+	fldd,mb	-8(%r30),   %fr18
+	fldd,mb	-8(%r30),   %fr17
+	fldd,mb	-8(%r30),   %fr16
+	fldd,mb	-8(%r30),   %fr15
+	fldd,mb	-8(%r30),   %fr14
+	fldd,mb	-8(%r30),   %fr13
+	fldd,mb	-8(%r30),   %fr12
+	.endm
+
 #ifdef __LP64__
 	.macro	callee_save
-	std,ma	  %r3,	CALLEE_SAVE_FRAME_SIZE(%r30)
+	std,ma	  %r3,	 CALLEE_REG_FRAME_SIZE(%r30)
 	mfctl	  %cr27, %r3
 	std	  %r4,	-136(%r30)
 	std	  %r5,	-128(%r30)
@@ -340,13 +370,13 @@
 	ldd	-128(%r30),    %r5
 	ldd	-136(%r30),    %r4
 	mtctl	%r3, %cr27
-	ldd,mb	-CALLEE_SAVE_FRAME_SIZE(%r30),    %r3
+	ldd,mb	-CALLEE_REG_FRAME_SIZE(%r30),    %r3
 	.endm
 
 #else /* ! __LP64__ */
 
 	.macro	callee_save
-	stw,ma	 %r3,	CALLEE_SAVE_FRAME_SIZE(%r30)
+	stw,ma	 %r3,	CALLEE_REG_FRAME_SIZE(%r30)
 	mfctl	 %cr27, %r3
 	stw	 %r4,	-124(%r30)
 	stw	 %r5,	-120(%r30)
@@ -384,7 +414,7 @@
 	ldw	-120(%r30),   %r5
 	ldw	-124(%r30),   %r4
 	mtctl	%r3, %cr27
-	ldw,mb	-CALLEE_SAVE_FRAME_SIZE(%r30),   %r3
+	ldw,mb	-CALLEE_REG_FRAME_SIZE(%r30),   %r3
 	.endm
 #endif /* ! __LP64__ */
 
@@ -450,5 +480,30 @@
 	REST_CR	(%cr22, PT_PSW	(\regs))
 	.endm
 
+
+	/* First step to create a "relied upon translation"
+	 * See PA 2.0 Arch. page F-4 and F-5.
+	 *
+	 * The ssm was originally necessary due to a "PCxT bug".
+	 * But someone decided it needed to be added to the architecture
+	 * and this "feature" went into rev3 of PA-RISC 1.1 Arch Manual.
+	 * It's been carried forward into PA 2.0 Arch as well. :^(
+	 *
+	 * "ssm 0,%r0" is a NOP with side effects (prefetch barrier).
+	 * rsm/ssm prevents the ifetch unit from speculatively fetching
+	 * instructions past this line in the code stream.
+	 * PA 2.0 processor will single step all insn in the same QUAD (4 insn).
+	 */
+	.macro	pcxt_ssm_bug
+	rsm	PSW_SM_I,%r0
+	nop	/* 1 */
+	nop	/* 2 */
+	nop	/* 3 */
+	nop	/* 4 */
+	nop	/* 5 */
+	nop	/* 6 */
+	nop	/* 7 */
+	.endm
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/include/asm-parisc/bitops.h b/include/asm-parisc/bitops.h
index af7db694b22..55b98c67fd8 100644
--- a/include/asm-parisc/bitops.h
+++ b/include/asm-parisc/bitops.h
@@ -2,7 +2,7 @@
 #define _PARISC_BITOPS_H
 
 #include <linux/compiler.h>
-#include <asm/spinlock.h>
+#include <asm/types.h>		/* for BITS_PER_LONG/SHIFT_PER_LONG */
 #include <asm/byteorder.h>
 #include <asm/atomic.h>
 
@@ -12,193 +12,157 @@
  * to include/asm-i386/bitops.h or kerneldoc
  */
 
-#ifdef __LP64__
-#   define SHIFT_PER_LONG 6
-#ifndef BITS_PER_LONG
-#   define BITS_PER_LONG 64
-#endif
-#else
-#   define SHIFT_PER_LONG 5
-#ifndef BITS_PER_LONG
-#   define BITS_PER_LONG 32
-#endif
-#endif
-
-#define CHOP_SHIFTCOUNT(x) ((x) & (BITS_PER_LONG - 1))
+#define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1))
 
 
 #define smp_mb__before_clear_bit()      smp_mb()
 #define smp_mb__after_clear_bit()       smp_mb()
 
-static __inline__ void set_bit(int nr, volatile unsigned long * address)
+/* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion
+ * on use of volatile and __*_bit() (set/clear/change):
+ *	*_bit() want use of volatile.
+ *	__*_bit() are "relaxed" and don't use spinlock or volatile.
+ */
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
 	unsigned long flags;
 
 	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
 	*addr |= mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
 }
 
-static __inline__ void __set_bit(int nr, volatile unsigned long * address)
+static __inline__ void __set_bit(unsigned long nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
+	unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
 
-	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
-	*addr |= mask;
+	*m |= 1UL << CHOP_SHIFTCOUNT(nr);
 }
 
-static __inline__ void clear_bit(int nr, volatile unsigned long * address)
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
+	unsigned long mask = ~(1UL << CHOP_SHIFTCOUNT(nr));
 	unsigned long flags;
 
 	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
-	*addr &= ~mask;
+	*addr &= mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
 }
 
-static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * address)
+static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
+	unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
 
-	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
-	*addr &= ~mask;
+	*m &= ~(1UL << CHOP_SHIFTCOUNT(nr));
 }
 
-static __inline__ void change_bit(int nr, volatile unsigned long * address)
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
 	unsigned long flags;
 
 	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
 	*addr ^= mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
 }
 
-static __inline__ void __change_bit(int nr, volatile unsigned long * address)
+static __inline__ void __change_bit(unsigned long nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
+	unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
 
-	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
-	*addr ^= mask;
+	*m ^= 1UL << CHOP_SHIFTCOUNT(nr);
 }
 
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
-	int oldbit;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long oldbit;
 	unsigned long flags;
 
 	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
-	oldbit = (*addr & mask) ? 1 : 0;
-	*addr |= mask;
+	oldbit = *addr;
+	*addr = oldbit | mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
 
-	return oldbit;
+	return (oldbit & mask) ? 1 : 0;
 }
 
 static __inline__ int __test_and_set_bit(int nr, volatile unsigned long * address)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
-	int oldbit;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long oldbit;
+	unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
 
-	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
-	oldbit = (*addr & mask) ? 1 : 0;
-	*addr |= mask;
+	oldbit = *addr;
+	*addr = oldbit | mask;
 
-	return oldbit;
+	return (oldbit & mask) ? 1 : 0;
 }
 
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
-	int oldbit;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long oldbit;
 	unsigned long flags;
 
 	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
-	oldbit = (*addr & mask) ? 1 : 0;
-	*addr &= ~mask;
+	oldbit = *addr;
+	*addr = oldbit & ~mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
 
-	return oldbit;
+	return (oldbit & mask) ? 1 : 0;
 }
 
 static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long * address)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
-	int oldbit;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
+	unsigned long oldbit;
 
-	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
-	oldbit = (*addr & mask) ? 1 : 0;
-	*addr &= ~mask;
+	oldbit = *addr;
+	*addr = oldbit & ~mask;
 
-	return oldbit;
+	return (oldbit & mask) ? 1 : 0;
 }
 
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
-	int oldbit;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long oldbit;
 	unsigned long flags;
 
 	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
-	oldbit = (*addr & mask) ? 1 : 0;
-	*addr ^= mask;
+	oldbit = *addr;
+	*addr = oldbit ^ mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
 
-	return oldbit;
+	return (oldbit & mask) ? 1 : 0;
 }
 
 static __inline__ int __test_and_change_bit(int nr, volatile unsigned long * address)
 {
-	unsigned long mask;
-	unsigned long *addr = (unsigned long *) address;
-	int oldbit;
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
+	unsigned long oldbit;
 
-	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
-	oldbit = (*addr & mask) ? 1 : 0;
-	*addr ^= mask;
+	oldbit = *addr;
+	*addr = oldbit ^ mask;
 
-	return oldbit;
+	return (oldbit & mask) ? 1 : 0;
 }
 
 static __inline__ int test_bit(int nr, const volatile unsigned long *address)
 {
-	unsigned long mask;
-	const unsigned long *addr = (const unsigned long *)address;
-	
-	addr += (nr >> SHIFT_PER_LONG);
-	mask = 1L << CHOP_SHIFTCOUNT(nr);
+	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	const unsigned long *addr = (const unsigned long *)address + (nr >> SHIFT_PER_LONG);
 	
 	return !!(*addr & mask);
 }
@@ -229,7 +193,7 @@ static __inline__ unsigned long __ffs(unsigned long x)
 	unsigned long ret;
 
 	__asm__(
-#if BITS_PER_LONG > 32
+#ifdef __LP64__
 		" ldi       63,%1\n"
 		" extrd,u,*<>  %0,63,32,%%r0\n"
 		" extrd,u,*TR  %0,31,32,%0\n"	/* move top 32-bits down */
@@ -304,14 +268,7 @@ static __inline__ int fls(int x)
  * hweightN: returns the hamming weight (i.e. the number
  * of bits set) of a N-bit word
  */
-#define hweight64(x)						\
-({								\
-	unsigned long __x = (x);				\
-	unsigned int __w;					\
-	__w = generic_hweight32((unsigned int) __x);		\
-	__w += generic_hweight32((unsigned int) (__x>>32));	\
-	__w;							\
-})
+#define hweight64(x) generic_hweight64(x)
 #define hweight32(x) generic_hweight32(x)
 #define hweight16(x) generic_hweight16(x)
 #define hweight8(x) generic_hweight8(x)
@@ -324,7 +281,13 @@ static __inline__ int fls(int x)
  */
 static inline int sched_find_first_bit(const unsigned long *b)
 {
-#ifndef __LP64__
+#ifdef __LP64__
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 64;
+	return __ffs(b[2]) + 128;
+#else
 	if (unlikely(b[0]))
 		return __ffs(b[0]);
 	if (unlikely(b[1]))
@@ -334,14 +297,6 @@ static inline int sched_find_first_bit(const unsigned long *b)
 	if (b[3])
 		return __ffs(b[3]) + 96;
 	return __ffs(b[4]) + 128;
-#else
-	if (unlikely(b[0]))
-		return __ffs(b[0]);
-	if (unlikely(((unsigned int)b[1])))
-		return __ffs(b[1]) + 64;
-	if (b[1] >> 32)
-		return __ffs(b[1] >> 32) + 96;
-	return __ffs(b[2]) + 128;
 #endif
 }
 
@@ -391,7 +346,7 @@ found_middle:
 
 static __inline__ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset)
 {
-	const unsigned long *p = addr + (offset >> 6);
+	const unsigned long *p = addr + (offset >> SHIFT_PER_LONG);
 	unsigned long result = offset & ~(BITS_PER_LONG-1);
 	unsigned long tmp;
 
@@ -445,71 +400,90 @@ found_middle:
  * test_and_{set,clear}_bit guarantee atomicity without
  * disabling interrupts.
  */
-#ifdef __LP64__
-#define ext2_set_bit(nr, addr)		__test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_set_bit_atomic(l,nr,addr)  test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr)	__test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
-#else
-#define ext2_set_bit(nr, addr)		__test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_set_bit_atomic(l,nr,addr)  test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr)	__test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
-#endif
 
-#endif	/* __KERNEL__ */
+/* '3' is bits per byte */
+#define LE_BYTE_ADDR ((sizeof(unsigned long) - 1) << 3)
 
-static __inline__ int ext2_test_bit(int nr, __const__ void * addr)
-{
-	__const__ unsigned char	*ADDR = (__const__ unsigned char *) addr;
+#define ext2_test_bit(nr, addr) \
+			test_bit((nr)	^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_set_bit(nr, addr)	\
+		__test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr) \
+		__test_and_clear_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
 
-	return (ADDR[nr >> 3] >> (nr & 7)) & 1;
-}
+#define ext2_set_bit_atomic(l,nr,addr) \
+		test_and_set_bit((nr)   ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_clear_bit_atomic(l,nr,addr) \
+		test_and_clear_bit( (nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+
+#endif	/* __KERNEL__ */
 
-/*
- * This implementation of ext2_find_{first,next}_zero_bit was stolen from
- * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
- */
 
 #define ext2_find_first_zero_bit(addr, size) \
-        ext2_find_next_zero_bit((addr), (size), 0)
+	ext2_find_next_zero_bit((addr), (size), 0)
 
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
-	unsigned long size, unsigned long offset)
+/* include/linux/byteorder does not support "unsigned long" type */
+static inline unsigned long ext2_swabp(unsigned long * x)
 {
-	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
-	unsigned int result = offset & ~31UL;
-	unsigned int tmp;
+#ifdef __LP64__
+	return (unsigned long) __swab64p((u64 *) x);
+#else
+	return (unsigned long) __swab32p((u32 *) x);
+#endif
+}
+
+/* include/linux/byteorder doesn't support "unsigned long" type */
+static inline unsigned long ext2_swab(unsigned long y)
+{
+#ifdef __LP64__
+	return (unsigned long) __swab64((u64) y);
+#else
+	return (unsigned long) __swab32((u32) y);
+#endif
+}
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = (unsigned long *) addr + (offset >> SHIFT_PER_LONG);
+	unsigned long result = offset & ~(BITS_PER_LONG - 1);
+	unsigned long tmp;
 
 	if (offset >= size)
 		return size;
 	size -= result;
-	offset &= 31UL;
+	offset &= (BITS_PER_LONG - 1UL);
 	if (offset) {
-		tmp = cpu_to_le32p(p++);
-		tmp |= ~0UL >> (32-offset);
-		if (size < 32)
+		tmp = ext2_swabp(p++);
+		tmp |= (~0UL >> (BITS_PER_LONG - offset));
+		if (size < BITS_PER_LONG)
 			goto found_first;
-		if (tmp != ~0U)
+		if (~tmp)
 			goto found_middle;
-		size -= 32;
-		result += 32;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
 	}
-	while (size >= 32) {
-		if ((tmp = cpu_to_le32p(p++)) != ~0U)
-			goto found_middle;
-		result += 32;
-		size -= 32;
+
+	while (size & ~(BITS_PER_LONG - 1)) {
+		if (~(tmp = *(p++)))
+			goto found_middle_swap;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
 	}
 	if (!size)
 		return result;
-	tmp = cpu_to_le32p(p);
+	tmp = ext2_swabp(p);
 found_first:
-	tmp |= ~0U << size;
+	tmp |= ~0UL << size;
+	if (tmp == ~0UL)	/* Are any bits zero? */
+		return result + size; /* Nope. Skip ffz */
 found_middle:
 	return result + ffz(tmp);
+
+found_middle_swap:
+	return result + ffz(ext2_swab(tmp));
 }
 
+
 /* Bitmap functions for the minix filesystem.  */
 #define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
 #define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
diff --git a/include/asm-parisc/errno.h b/include/asm-parisc/errno.h
index 08464c40547..e2f3ddc796b 100644
--- a/include/asm-parisc/errno.h
+++ b/include/asm-parisc/errno.h
@@ -114,6 +114,7 @@
 
 #define ENOTSUP		252	/* Function not implemented (POSIX.4 / HPUX) */
 #define ECANCELLED	253	/* aio request was canceled before complete (POSIX.4 / HPUX) */
+#define ECANCELED	ECANCELLED	/* SuSv3 and Solaris wants one 'L' */
 
 /* for robust mutexes */
 #define EOWNERDEAD	254	/* Owner died */
diff --git a/include/asm-parisc/grfioctl.h b/include/asm-parisc/grfioctl.h
index d3cfc0168fb..6a910311b56 100644
--- a/include/asm-parisc/grfioctl.h
+++ b/include/asm-parisc/grfioctl.h
@@ -69,6 +69,8 @@
 #define CRT_ID_TVRX		S9000_ID_98765	/* TVRX (gto/falcon) */
 #define CRT_ID_ARTIST		S9000_ID_ARTIST	/* Artist */
 #define CRT_ID_SUMMIT		0x2FC1066B      /* Summit FX2, FX4, FX6 ... */
+#define CRT_ID_LEGO		0x35ACDA30	/* Lego FX5, FX10 ... */
+#define CRT_ID_PINNACLE		0x35ACDA16	/* Pinnacle FXe */ 
 
 /* structure for ioctl(GCDESCRIBE) */
 
diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h
index 1ac8ab6c580..efadfd543ec 100644
--- a/include/asm-parisc/led.h
+++ b/include/asm-parisc/led.h
@@ -23,9 +23,6 @@
 
 #define LED_CMD_REG_NONE 0		/* NULL == no addr for the cmd register */
 
-/* led tasklet struct */
-extern struct tasklet_struct led_tasklet;
-
 /* register_led_driver() */
 int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg);
 
diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h
index ef69ab4b17a..1d247e32a60 100644
--- a/include/asm-parisc/parisc-device.h
+++ b/include/asm-parisc/parisc-device.h
@@ -1,7 +1,7 @@
 #include <linux/device.h>
 
 struct parisc_device {
-	unsigned long   hpa;		/* Hard Physical Address */
+	struct resource hpa;		/* Hard Physical Address */
 	struct parisc_device_id id;
 	struct parisc_driver *driver;	/* Driver for this device */
 	char		name[80];	/* The hardware description */
@@ -39,6 +39,11 @@ struct parisc_driver {
 #define to_parisc_driver(d)	container_of(d, struct parisc_driver, drv)
 #define parisc_parent(d)	to_parisc_device(d->dev.parent)
 
+static inline char *parisc_pathname(struct parisc_device *d)
+{
+	return d->dev.bus_id;
+}
+
 static inline void
 parisc_set_drvdata(struct parisc_device *d, void *p)
 {
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index d0b761f690b..fa39d07d49e 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -69,7 +69,7 @@ struct pci_hba_data {
 #define PCI_PORT_HBA(a)		((a) >> HBA_PORT_SPACE_BITS)
 #define PCI_PORT_ADDR(a)	((a) & (HBA_PORT_SPACE_SIZE - 1))
 
-#if CONFIG_64BIT
+#ifdef CONFIG_64BIT
 #define PCI_F_EXTEND		0xffffffff00000000UL
 #define PCI_IS_LMMIO(hba,a)	pci_is_lmmio(hba,a)
 
diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
index 820c6e712cd..c28fb6f48c6 100644
--- a/include/asm-parisc/pgtable.h
+++ b/include/asm-parisc/pgtable.h
@@ -501,6 +501,8 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
+
 #define MK_IOSPACE_PFN(space, pfn)	(pfn)
 #define GET_IOSPACE(pfn)		0
 #define GET_PFN(pfn)			(pfn)
diff --git a/include/asm-parisc/processor.h b/include/asm-parisc/processor.h
index a9dfadd0565..aae40e8c3aa 100644
--- a/include/asm-parisc/processor.h
+++ b/include/asm-parisc/processor.h
@@ -122,8 +122,27 @@ struct thread_struct {
 }; 
 
 /* Thread struct flags. */
+#define PARISC_UAC_NOPRINT	(1UL << 0)	/* see prctl and unaligned.c */
+#define PARISC_UAC_SIGBUS	(1UL << 1)
 #define PARISC_KERNEL_DEATH	(1UL << 31)	/* see die_if_kernel()... */
 
+#define PARISC_UAC_SHIFT	0
+#define PARISC_UAC_MASK		(PARISC_UAC_NOPRINT|PARISC_UAC_SIGBUS)
+
+#define SET_UNALIGN_CTL(task,value)                                       \
+        ({                                                                \
+        (task)->thread.flags = (((task)->thread.flags & ~PARISC_UAC_MASK) \
+                                | (((value) << PARISC_UAC_SHIFT) &        \
+                                   PARISC_UAC_MASK));                     \
+        0;                                                                \
+        })
+
+#define GET_UNALIGN_CTL(task,addr)                                        \
+        ({                                                                \
+        put_user(((task)->thread.flags & PARISC_UAC_MASK)                 \
+                 >> PARISC_UAC_SHIFT, (int __user *) (addr));             \
+        })
+
 #define INIT_THREAD { \
 	regs:	{	gr: { 0, }, \
 			fr: { 0, }, \
diff --git a/include/asm-parisc/psw.h b/include/asm-parisc/psw.h
index 51323029f37..4334d6ca2ad 100644
--- a/include/asm-parisc/psw.h
+++ b/include/asm-parisc/psw.h
@@ -1,4 +1,7 @@
 #ifndef _PARISC_PSW_H
+
+#include <linux/config.h>
+
 #define	PSW_I	0x00000001
 #define	PSW_D	0x00000002
 #define	PSW_P	0x00000004
@@ -9,6 +12,16 @@
 #define	PSW_G	0x00000040	/* PA1.x only */
 #define PSW_O	0x00000080	/* PA2.0 only */
 
+/* ssm/rsm instructions number PSW_W and PSW_E differently */
+#define PSW_SM_I	PSW_I	/* Enable External Interrupts */
+#define PSW_SM_D	PSW_D
+#define PSW_SM_P	PSW_P
+#define PSW_SM_Q	PSW_Q	/* Enable Interrupt State Collection */
+#define PSW_SM_R	PSW_R	/* Enable Recover Counter Trap */
+#define PSW_SM_W	0x200	/* PA2.0 only : Enable Wide Mode */
+
+#define PSW_SM_QUIET	PSW_SM_R+PSW_SM_Q+PSW_SM_P+PSW_SM_D+PSW_SM_I
+
 #define PSW_CB	0x0000ff00
 
 #define	PSW_M	0x00010000
@@ -30,33 +43,21 @@
 #define	PSW_Z	0x40000000	/* PA1.x only */
 #define	PSW_Y	0x80000000	/* PA1.x only */
 
-#ifdef __LP64__
-#define PSW_HI_CB 0x000000ff    /* PA2.0 only */
+#ifdef CONFIG_64BIT
+#  define PSW_HI_CB 0x000000ff    /* PA2.0 only */
 #endif
 
-/* PSW bits to be used with ssm/rsm */
-#define PSW_SM_I        0x1
-#define PSW_SM_D        0x2
-#define PSW_SM_P        0x4
-#define PSW_SM_Q        0x8
-#define PSW_SM_R        0x10
-#define PSW_SM_F        0x20
-#define PSW_SM_G        0x40
-#define PSW_SM_O        0x80
-#define PSW_SM_E        0x100
-#define PSW_SM_W        0x200
-
-#ifdef __LP64__
-#  define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
-#  define KERNEL_PSW    (PSW_W | PSW_C | PSW_Q | PSW_P | PSW_D)
-#  define REAL_MODE_PSW (PSW_W | PSW_Q)
-#  define USER_PSW_MASK (PSW_W | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
-#  define USER_PSW_HI_MASK (PSW_HI_CB)
-#else
-#  define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
-#  define KERNEL_PSW    (PSW_C | PSW_Q | PSW_P | PSW_D)
-#  define REAL_MODE_PSW (PSW_Q)
-#  define USER_PSW_MASK (PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#ifdef CONFIG_64BIT
+#  define USER_PSW_HI_MASK	PSW_HI_CB
+#  define WIDE_PSW		PSW_W
+#else 
+#  define WIDE_PSW		0
 #endif
 
+/* Used when setting up for rfi */
+#define KERNEL_PSW    (WIDE_PSW | PSW_C | PSW_Q | PSW_P | PSW_D)
+#define REAL_MODE_PSW (WIDE_PSW | PSW_Q)
+#define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
+
 #endif
diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h
index 3f428aa371a..93f990e418f 100644
--- a/include/asm-parisc/ptrace.h
+++ b/include/asm-parisc/ptrace.h
@@ -49,7 +49,7 @@ struct pt_regs {
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
 #define user_space(regs)		(((regs)->iasq[1] != 0) ? 1 : 0)
 #define instruction_pointer(regs)	((regs)->iaoq[0] & ~3)
-#define profile_pc(regs) instruction_pointer(regs)
+unsigned long profile_pc(struct pt_regs *);
 extern void show_regs(struct pt_regs *);
 #endif
 
diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h
index 43eaa6e742e..7c3f406a746 100644
--- a/include/asm-parisc/spinlock.h
+++ b/include/asm-parisc/spinlock.h
@@ -5,11 +5,6 @@
 #include <asm/processor.h>
 #include <asm/spinlock_types.h>
 
-/* Note that PA-RISC has to use `1' to mean unlocked and `0' to mean locked
- * since it only has load-and-zero. Moreover, at least on some PA processors,
- * the semaphore address has to be 16-byte aligned.
- */
-
 static inline int __raw_spin_is_locked(raw_spinlock_t *x)
 {
 	volatile unsigned int *a = __ldcw_align(x);
diff --git a/include/asm-parisc/spinlock_types.h b/include/asm-parisc/spinlock_types.h
index 785bba822fb..d6b479bdb88 100644
--- a/include/asm-parisc/spinlock_types.h
+++ b/include/asm-parisc/spinlock_types.h
@@ -6,11 +6,15 @@
 #endif
 
 typedef struct {
+#ifdef CONFIG_PA20
+	volatile unsigned int slock;
+# define __RAW_SPIN_LOCK_UNLOCKED { 1 }
+#else
 	volatile unsigned int lock[4];
+# define __RAW_SPIN_LOCK_UNLOCKED	{ { 1, 1, 1, 1 } }
+#endif
 } raw_spinlock_t;
 
-#define __RAW_SPIN_LOCK_UNLOCKED	{ { 1, 1, 1, 1 } }
-
 typedef struct {
 	raw_spinlock_t lock;
 	volatile int counter;
diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h
index 26ff844a21c..f3928d3a80c 100644
--- a/include/asm-parisc/system.h
+++ b/include/asm-parisc/system.h
@@ -138,13 +138,7 @@ static inline void set_eiem(unsigned long val)
 #define set_wmb(var, value)		do { var = value; wmb(); } while (0)
 
 
-/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
-#define __ldcw(a) ({ \
-	unsigned __ret; \
-	__asm__ __volatile__("ldcw 0(%1),%0" : "=r" (__ret) : "r" (a)); \
-	__ret; \
-})
-
+#ifndef CONFIG_PA20
 /* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
    and GCC only guarantees 8-byte alignment for stack locals, we can't
    be assured of 16-byte alignment for atomic lock data even if we
@@ -152,37 +146,41 @@ static inline void set_eiem(unsigned long val)
    we use a struct containing an array of four ints for the atomic lock
    type and dynamically select the 16-byte aligned int from the array
    for the semaphore.  */
+
 #define __PA_LDCW_ALIGNMENT 16
 #define __ldcw_align(a) ({ \
   unsigned long __ret = (unsigned long) &(a)->lock[0];        		\
   __ret = (__ret + __PA_LDCW_ALIGNMENT - 1) & ~(__PA_LDCW_ALIGNMENT - 1); \
   (volatile unsigned int *) __ret;                                      \
 })
+#define LDCW	"ldcw"
 
-#ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
-#endif
+#else /*CONFIG_PA20*/
+/* From: "Jim Hull" <jim.hull of hp.com>
+   I've attached a summary of the change, but basically, for PA 2.0, as
+   long as the ",CO" (coherent operation) completer is specified, then the
+   16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
+   they only require "natural" alignment (4-byte for ldcw, 8-byte for
+   ldcd). */
 
-#define KERNEL_START (0x10100000 - 0x1000)
+#define __PA_LDCW_ALIGNMENT 4
+#define __ldcw_align(a) ((volatile unsigned int *)a)
+#define LDCW	"ldcw,co"
 
-/* This is for the serialisation of PxTLB broadcasts.  At least on the
- * N class systems, only one PxTLB inter processor broadcast can be
- * active at any one time on the Merced bus.  This tlb purge
- * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class. */
-#ifdef CONFIG_SMP
-extern spinlock_t pa_tlb_lock;
+#endif /*!CONFIG_PA20*/
 
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
-
-#else
-
-#define purge_tlb_start(x) do { } while(0)
-#define purge_tlb_end(x) do { } while (0)
+/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
+#define __ldcw(a) ({ \
+	unsigned __ret; \
+	__asm__ __volatile__(LDCW " 0(%1),%0" : "=r" (__ret) : "r" (a)); \
+	__ret; \
+})
 
+#ifdef CONFIG_SMP
+# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
 #endif
 
+#define KERNEL_START (0x10100000 - 0x1000)
 #define arch_align_stack(x) (x)
 
 #endif
diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h
index eb27b78930e..84af4ab1fe5 100644
--- a/include/asm-parisc/tlbflush.h
+++ b/include/asm-parisc/tlbflush.h
@@ -7,6 +7,26 @@
 #include <linux/mm.h>
 #include <asm/mmu_context.h>
 
+
+/* This is for the serialisation of PxTLB broadcasts.  At least on the
+ * N class systems, only one PxTLB inter processor broadcast can be
+ * active at any one time on the Merced bus.  This tlb purge
+ * synchronisation is fairly lightweight and harmless so we activate
+ * it on all SMP systems not just the N class. */
+#ifdef CONFIG_SMP
+extern spinlock_t pa_tlb_lock;
+
+#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
+#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+
+#else
+
+#define purge_tlb_start(x) do { } while(0)
+#define purge_tlb_end(x) do { } while (0)
+
+#endif
+
+
 extern void flush_tlb_all(void);
 
 /*
@@ -64,29 +84,26 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 {
 	unsigned long npages;
 
-	
 	npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-	if (npages >= 512)  /* XXX arbitrary, should be tuned */
+	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
 		flush_tlb_all();
 	else {
 
 		mtsp(vma->vm_mm->context,1);
+		purge_tlb_start();
 		if (split_tlb) {
-			purge_tlb_start();
 			while (npages--) {
 				pdtlb(start);
 				pitlb(start);
 				start += PAGE_SIZE;
 			}
-			purge_tlb_end();
 		} else {
-			purge_tlb_start();
 			while (npages--) {
 				pdtlb(start);
 				start += PAGE_SIZE;
 			}
-			purge_tlb_end();
 		}
+		purge_tlb_end();
 	}
 }
 
diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h
index d21b9d0d63e..34fdce361a5 100644
--- a/include/asm-parisc/types.h
+++ b/include/asm-parisc/types.h
@@ -33,8 +33,10 @@ typedef unsigned long long __u64;
 
 #ifdef __LP64__
 #define BITS_PER_LONG 64
+#define SHIFT_PER_LONG 6
 #else
 #define BITS_PER_LONG 32
+#define SHIFT_PER_LONG 5
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h
index 6a9f0cadff5..e7a620c5c5e 100644
--- a/include/asm-parisc/unistd.h
+++ b/include/asm-parisc/unistd.h
@@ -687,8 +687,8 @@
 #define __NR_shmget             (__NR_Linux + 194)
 #define __NR_shmctl             (__NR_Linux + 195)
 
-#define __NR_getpmsg            (__NR_Linux + 196)      /* some people actually want streams */
-#define __NR_putpmsg            (__NR_Linux + 197)      /* some people actually want streams */
+#define __NR_getpmsg		(__NR_Linux + 196) /* Somebody *wants* streams? */
+#define __NR_putpmsg		(__NR_Linux + 197)
 
 #define __NR_lstat64            (__NR_Linux + 198)
 #define __NR_truncate64         (__NR_Linux + 199)
@@ -755,8 +755,14 @@
 #define __NR_mbind		(__NR_Linux + 260)
 #define __NR_get_mempolicy	(__NR_Linux + 261)
 #define __NR_set_mempolicy	(__NR_Linux + 262)
+#define __NR_vserver		(__NR_Linux + 263)
+#define __NR_add_key		(__NR_Linux + 264)
+#define __NR_request_key	(__NR_Linux + 265)
+#define __NR_keyctl		(__NR_Linux + 266)
+#define __NR_ioprio_set		(__NR_Linux + 267)
+#define __NR_ioprio_get		(__NR_Linux + 268)
 
-#define __NR_Linux_syscalls     263
+#define __NR_Linux_syscalls     269
 
 #define HPUX_GATEWAY_ADDR       0xC0000004
 #define LINUX_GATEWAY_ADDR      0x100
@@ -807,10 +813,10 @@
 #define K_INLINE_SYSCALL(name, nr, args...)	({			\
 	long __sys_res;							\
 	{								\
-		register unsigned long __res asm("r28");		\
+		register unsigned long __res __asm__("r28");		\
 		K_LOAD_ARGS_##nr(args)					\
 		/* FIXME: HACK stw/ldw r19 around syscall */		\
-		asm volatile(						\
+		__asm__ volatile(					\
 			K_STW_ASM_PIC					\
 			"	ble  0x100(%%sr2, %%r0)\n"		\
 			"	ldi %1, %%r20\n"			\
diff --git a/include/linux/hil.h b/include/linux/hil.h
new file mode 100644
index 00000000000..13352d7d0ca
--- /dev/null
+++ b/include/linux/hil.h
@@ -0,0 +1,483 @@
+#ifndef _HIL_H_
+#define _HIL_H_
+
+/*
+ * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ * A note of thanks to HP for providing and shipping reference materials
+ * free of charge to help in the development of HIL support for Linux.
+ *
+ */
+
+#include <asm/types.h>
+
+/* Physical constants relevant to raw loop/device timing. 
+ */ 
+
+#define HIL_CLOCK		8MHZ
+#define HIL_EK1_CLOCK		30HZ
+#define HIL_EK2_CLOCK		60HZ
+
+#define HIL_TIMEOUT_DEV         5	/* ms */
+#define HIL_TIMEOUT_DEVS	10	/* ms */
+#define HIL_TIMEOUT_NORESP	10	/* ms */
+#define HIL_TIMEOUT_DEVS_DATA	16	/* ms */
+#define HIL_TIMEOUT_SELFTEST	200	/* ms */
+
+
+/* Actual wire line coding.  These will only be useful if someone is 
+ * implementing a software MLC to run HIL devices on a non-parisc machine.
+ */
+
+#define HIL_WIRE_PACKET_LEN	15
+enum hil_wire_bitpos {
+	HIL_WIRE_START		= 0,
+	HIL_WIRE_ADDR2,
+	HIL_WIRE_ADDR1,
+	HIL_WIRE_ADDR0,
+	HIL_WIRE_COMMAND,
+	HIL_WIRE_DATA7,
+	HIL_WIRE_DATA6,
+	HIL_WIRE_DATA5,
+	HIL_WIRE_DATA4,
+	HIL_WIRE_DATA3,
+	HIL_WIRE_DATA2,
+	HIL_WIRE_DATA1,
+	HIL_WIRE_DATA0,
+	HIL_WIRE_PARITY,
+	HIL_WIRE_STOP
+};
+
+/* HP documentation uses these bit positions to refer to commands;
+ * we will call these "packets".
+ */
+enum hil_pkt_bitpos {
+	HIL_PKT_CMD		= 0x00000800,
+	HIL_PKT_ADDR2		= 0x00000400,
+	HIL_PKT_ADDR1		= 0x00000200,
+	HIL_PKT_ADDR0		= 0x00000100,
+	HIL_PKT_ADDR_MASK	= 0x00000700,
+	HIL_PKT_ADDR_SHIFT	= 8,
+	HIL_PKT_DATA7		= 0x00000080,
+	HIL_PKT_DATA6		= 0x00000040,
+	HIL_PKT_DATA5		= 0x00000020,
+	HIL_PKT_DATA4		= 0x00000010,
+	HIL_PKT_DATA3		= 0x00000008,
+	HIL_PKT_DATA2		= 0x00000004,
+	HIL_PKT_DATA1		= 0x00000002,
+	HIL_PKT_DATA0		= 0x00000001,
+	HIL_PKT_DATA_MASK	= 0x000000FF,
+	HIL_PKT_DATA_SHIFT	= 0
+};
+
+/* The HIL MLC also has several error/status/control bits.  We extend the 
+ * "packet" to include these when direct access to the MLC is available,
+ * or emulate them in cases where they are not available. 
+ *
+ * This way the device driver knows that the underlying MLC driver
+ * has had to deal with loop errors.
+ */
+enum hil_error_bitpos {
+	HIL_ERR_OB	= 0x00000800, /* MLC is busy sending an auto-poll, 
+					 or we have filled up the output 
+					 buffer and must wait. */
+	HIL_ERR_INT	= 0x00010000, /* A normal interrupt has occurred. */
+	HIL_ERR_NMI	= 0x00020000, /* An NMI has occurred. */
+	HIL_ERR_LERR	= 0x00040000, /* A poll didn't come back. */
+	HIL_ERR_PERR	= 0x01000000, /* There was a Parity Error. */
+	HIL_ERR_FERR	= 0x02000000, /* There was a Framing Error. */
+	HIL_ERR_FOF	= 0x04000000  /* Input FIFO Overflowed. */
+};
+
+enum hil_control_bitpos {
+	HIL_CTRL_TEST	= 0x00010000,
+	HIL_CTRL_IPF	= 0x00040000,
+	HIL_CTRL_APE	= 0x02000000
+};
+
+/* Bits 30,31 are unused, we use them to control write behavior. */
+#define HIL_DO_ALTER_CTRL  0x40000000 /* Write MSW of packet to control 
+                                          before writing LSW to loop */
+#define HIL_CTRL_ONLY      0xc0000000 /* *Only* alter the control registers */
+
+/* This gives us a 32-bit "packet" 
+ */
+typedef u32 hil_packet;
+
+
+/* HIL Loop commands 
+ */
+enum hil_command {
+	HIL_CMD_IFC	= 0x00,	/* Interface Clear */
+	HIL_CMD_EPT	= 0x01,	/* Enter Pass-Thru Mode */
+	HIL_CMD_ELB	= 0x02,	/* Enter Loop-Back Mode */
+	HIL_CMD_IDD	= 0x03,	/* Identify and Describe */
+	HIL_CMD_DSR	= 0x04,	/* Device Soft Reset */
+	HIL_CMD_PST	= 0x05,	/* Perform Self Test */
+	HIL_CMD_RRG	= 0x06,	/* Read Register */
+	HIL_CMD_WRG	= 0x07,	/* Write Register */
+	HIL_CMD_ACF	= 0x08,	/* Auto Configure */
+	HIL_CMDID_ACF	= 0x07,	/* Auto Configure bits with incremented ID */
+	HIL_CMD_POL	= 0x10,	/* Poll */
+	HIL_CMDCT_POL	= 0x0f,	/* Poll command bits with item count  */
+	HIL_CMD_RPL	= 0x20,	/* RePoll */
+	HIL_CMDCT_RPL	= 0x0f,	/* RePoll command bits with item count */
+	HIL_CMD_RNM	= 0x30,	/* Report Name */
+	HIL_CMD_RST	= 0x31,	/* Report Status */
+	HIL_CMD_EXD	= 0x32,	/* Extended Describe */
+	HIL_CMD_RSC	= 0x33,	/* Report Security Code */
+
+	/* 0x34 to 0x3c reserved for future use  */
+
+	HIL_CMD_DKA	= 0x3d,	/* Disable Keyswitch Autorepeat */
+	HIL_CMD_EK1	= 0x3e,	/* Enable Keyswitch Autorepeat 1 */
+	HIL_CMD_EK2	= 0x3f,	/* Enable Keyswitch Autorepeat 2 */
+	HIL_CMD_PR1	= 0x40,	/* Prompt1 */  
+	HIL_CMD_PR2	= 0x41,	/* Prompt2 */
+	HIL_CMD_PR3	= 0x42,	/* Prompt3 */
+	HIL_CMD_PR4	= 0x43,	/* Prompt4 */
+	HIL_CMD_PR5	= 0x44,	/* Prompt5 */
+	HIL_CMD_PR6	= 0x45,	/* Prompt6 */
+	HIL_CMD_PR7	= 0x46,	/* Prompt7 */
+	HIL_CMD_PRM	= 0x47,	/* Prompt (General Purpose) */
+	HIL_CMD_AK1	= 0x48,	/* Acknowlege1 */  
+	HIL_CMD_AK2	= 0x49,	/* Acknowlege2 */
+	HIL_CMD_AK3	= 0x4a,	/* Acknowlege3 */
+	HIL_CMD_AK4	= 0x4b,	/* Acknowlege4 */
+	HIL_CMD_AK5	= 0x4c,	/* Acknowlege5 */
+	HIL_CMD_AK6	= 0x4d,	/* Acknowlege6 */
+	HIL_CMD_AK7	= 0x4e,	/* Acknowlege7 */
+	HIL_CMD_ACK	= 0x4f,	/* Acknowlege (General Purpose) */
+
+	/* 0x50 to 0x78 reserved for future use  */
+	/* 0x80 to 0xEF device-specific commands */
+	/* 0xf0 to 0xf9 reserved for future use  */
+
+	HIL_CMD_RIO	= 0xfa,	/* Register I/O Error */
+	HIL_CMD_SHR	= 0xfb,	/* System Hard Reset */
+	HIL_CMD_TER	= 0xfc,	/* Transmission Error */
+	HIL_CMD_CAE	= 0xfd,	/* Configuration Address Error */
+	HIL_CMD_DHR	= 0xfe,	/* Device Hard Reset */
+
+	/* 0xff is prohibited from use. */
+};
+
+
+/* 
+ * Response "records" to HIL commands
+ */
+
+/* Device ID byte 
+ */
+#define HIL_IDD_DID_TYPE_MASK		0xe0	/* Primary type bits */
+#define HIL_IDD_DID_TYPE_KB_INTEGRAL	0xa0	/* Integral keyboard */
+#define HIL_IDD_DID_TYPE_KB_ITF		0xc0	/* ITD keyboard */
+#define HIL_IDD_DID_TYPE_KB_RSVD	0xe0	/* Reserved keyboard type */
+#define HIL_IDD_DID_TYPE_KB_LANG_MASK	0x1f	/* Keyboard locale bits */
+#define HIL_IDD_DID_KBLANG_USE_ESD	0x00	/* Use ESD Locale instead */
+#define HIL_IDD_DID_TYPE_ABS		0x80    /* Absolute Positioners */
+#define HIL_IDD_DID_ABS_RSVD1_MASK	0xf8	/* Reserved */
+#define HIL_IDD_DID_ABS_RSVD1		0x98
+#define HIL_IDD_DID_ABS_TABLET_MASK	0xf8	/* Tablets and digitizers */
+#define HIL_IDD_DID_ABS_TABLET		0x90
+#define HIL_IDD_DID_ABS_TSCREEN_MASK	0xfc	/* Touch screens */
+#define HIL_IDD_DID_ABS_TSCREEN		0x8c
+#define HIL_IDD_DID_ABS_RSVD2_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_ABS_RSVD2		0x88
+#define HIL_IDD_DID_ABS_RSVD3_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_ABS_RSVD3		0x80
+#define HIL_IDD_DID_TYPE_REL		0x60    /* Relative Positioners */
+#define HIL_IDD_DID_REL_RSVD1_MASK	0xf0	/* Reserved */
+#define HIL_IDD_DID_REL_RSVD1		0x70
+#define HIL_IDD_DID_REL_RSVD2_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_REL_RSVD2		0x6c
+#define HIL_IDD_DID_REL_MOUSE_MASK	0xfc	/* Mouse */
+#define HIL_IDD_DID_REL_MOUSE		0x68
+#define HIL_IDD_DID_REL_QUAD_MASK	0xf8	/* Other Quadrature Devices */
+#define HIL_IDD_DID_REL_QUAD		0x60
+#define HIL_IDD_DID_TYPE_CHAR		0x40    /* Character Entry */
+#define HIL_IDD_DID_CHAR_BARCODE_MASK	0xfc	/* Barcode Reader */
+#define HIL_IDD_DID_CHAR_BARCODE	0x5c
+#define HIL_IDD_DID_CHAR_RSVD1_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD1		0x58
+#define HIL_IDD_DID_CHAR_RSVD2_MASK	0xf8	/* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD2		0x50
+#define HIL_IDD_DID_CHAR_RSVD3_MASK	0xf0	/* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD3		0x40
+#define HIL_IDD_DID_TYPE_OTHER		0x20    /* Miscellaneous */
+#define HIL_IDD_DID_OTHER_RSVD1_MASK	0xf0	/* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD1		0x30
+#define HIL_IDD_DID_OTHER_BARCODE_MASK	0xfc	/* Tone Generator */
+#define HIL_IDD_DID_OTHER_BARCODE	0x2c
+#define HIL_IDD_DID_OTHER_RSVD2_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD2		0x28
+#define HIL_IDD_DID_OTHER_RSVD3_MASK	0xf8	/* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD3		0x20
+#define HIL_IDD_DID_TYPE_KEYPAD		0x00	/* Vectra Keyboard */
+
+/* IDD record header 
+ */
+#define HIL_IDD_HEADER_AXSET_MASK	0x03    /* Number of axis in a set */
+#define HIL_IDD_HEADER_RSC		0x04	/* Supports RSC command */
+#define HIL_IDD_HEADER_EXD		0x08	/* Supports EXD command */
+#define HIL_IDD_HEADER_IOD		0x10	/* IOD byte to follow */
+#define HIL_IDD_HEADER_16BIT		0x20	/* 16 (vs. 8) bit resolution */
+#define HIL_IDD_HEADER_ABS		0x40	/* Reports Absolute Position */
+#define HIL_IDD_HEADER_2X_AXIS		0x80	/* Two sets of 1-3 axis */
+
+/* I/O Descriptor
+ */
+#define HIL_IDD_IOD_NBUTTON_MASK	0x07	/* Number of buttons */
+#define HIL_IDD_IOD_PROXIMITY		0x08	/* Proximity in/out events */
+#define HIL_IDD_IOD_PROMPT_MASK		0x70	/* Number of prompts/acks */
+#define HIL_IDD_IOD_PROMPT_SHIFT	4
+#define HIL_IDD_IOD_PROMPT		0x80	/* Generic prompt/ack */
+
+#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \
+((header_packet) & HIL_IDD_HEADER_AXSET_MASK)
+
+#define HIL_IDD_NUM_AXSETS(header_packet) \
+(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS))
+
+#define HIL_IDD_LEN(header_packet) \
+((4 - !(header_packet & HIL_IDD_HEADER_IOD) -			\
+  2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) +		\
+  2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) *			\
+ !!((header_packet) & HIL_IDD_HEADER_ABS))
+
+/* The following HIL_IDD_* macros assume you have an array of 
+ * packets and/or unpacked 8-bit data in the order that they 
+ * were received.
+ */
+
+#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \
+(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 :			\
+(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) +			\
+  ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8)		\
+* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1)))
+
+#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \
+((!(*(header_ptr) & HIL_IDD_HEADER_ABS) ||			\
+  (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 :	\
+ ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) +	\
+  ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8)))
+
+#define HIL_IDD_IOD(header_ptr) \
+(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1))
+
+#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) &&				\
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT))
+
+#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) &&				\
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY))
+
+#define HIL_IDD_NUM_BUTTONS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ?				\
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0)
+
+#define HIL_IDD_NUM_PROMPTS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ?				\
+ ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK)		\
+  >> HIL_IDD_IOD_PROMPT_SHIFT) : 0)
+
+/* The response to HIL EXD commands -- the "extended describe record" */
+#define	HIL_EXD_HEADER_WRG		0x03	/* Supports type2 WRG */
+#define HIL_EXD_HEADER_WRG_TYPE1	0x01	/* Supports type1 WRG */
+#define	HIL_EXD_HEADER_WRG_TYPE2	0x02	/* Supports type2 WRG */
+#define	HIL_EXD_HEADER_RRG		0x04	/* Supports RRG command */
+#define	HIL_EXD_HEADER_RNM		0x10	/* Supports RNM command */
+#define HIL_EXD_HEADER_RST		0x20	/* Supports RST command */
+#define HIL_EXD_HEADER_LOCALE		0x40	/* Contains locale code */
+
+#define HIL_EXD_NUM_RRG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_RRG) ? \
+ (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_NUM_WWG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_WRG) ?				\
+ (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) &	\
+    HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_LEN(header_ptr) \
+(!!(*header_ptr & HIL_EXD_HEADER_RRG) +				\
+ !!(*header_ptr & HIL_EXD_HEADER_WRG) +				\
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE) +			\
+ 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1)
+
+#define HIL_EXD_LOCALE(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 :			\
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK))
+
+#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1	:			\
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 -                  	\
+    !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) +	\
+ ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 -				\
+     !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8))
+
+/* Device locale codes. */ 
+
+/* Last defined locale code.  Everything above this is "Reserved",
+   and note that this same table applies to the Device ID Byte where 
+   keyboards may have a nationality code which is only 5 bits. */
+#define HIL_LOCALE_MAX 0x1f
+
+/* Map to hopefully useful strings.  I was trying to make these look
+   like locale.aliases strings do; maybe that isn't the right table to
+   emulate.  In either case, I didn't have much to work on. */
+#define HIL_LOCALE_MAP \
+"",			/* 0x00 Reserved */		\
+"",			/* 0x01 Reserved */		\
+"",			/* 0x02 Reserved */		\
+"swiss.french",		/* 0x03 Swiss/French */		\
+"portuguese",		/* 0x04 Portuguese */		\
+"arabic",		/* 0x05 Arabic */		\
+"hebrew",		/* 0x06 Hebrew */		\
+"english.canadian",	/* 0x07 Canadian English */	\
+"turkish",		/* 0x08 Turkish */		\
+"greek",		/* 0x09 Greek */		\
+"thai",			/* 0x0a Thai (Thailand) */	\
+"italian",		/* 0x0b Italian */		\
+"korean",		/* 0x0c Hangul (Korea) */	\
+"dutch",		/* 0x0d Dutch */		\
+"swedish",		/* 0x0e Swedish */		\
+"german",		/* 0x0f German */		\
+"chinese",		/* 0x10 Chinese-PRC */		\
+"chinese",		/* 0x11 Chinese-ROC */		\
+"swiss.french",		/* 0x12 Swiss/French II */	\
+"spanish",		/* 0x13 Spanish */		\
+"swiss.german",		/* 0x14 Swiss/German II */	\
+"flemish",		/* 0x15 Belgian (Flemish) */	\
+"finnish",		/* 0x16 Finnish	*/		\
+"english.uk",		/* 0x17 United Kingdom */	\
+"french.canadian",	/* 0x18 French/Canadian */	\
+"swiss.german",		/* 0x19 Swiss/German */		\
+"norwegian",		/* 0x1a Norwegian */		\
+"french",		/* 0x1b French */		\
+"danish",		/* 0x1c Danish */		\
+"japanese",		/* 0x1d Katakana */		\
+"spanish",		/* 0x1e Latin American/Spanish*/\
+"english.us"		/* 0x1f United States */	\
+
+
+/* HIL keycodes */
+#define HIL_KEYCODES_SET1_TBLSIZE 128
+#define HIL_KEYCODES_SET1 	\
+   KEY_5,		KEY_RESERVED,	KEY_RIGHTALT,	KEY_LEFTALT,	\
+   KEY_RIGHTSHIFT,	KEY_LEFTSHIFT,	KEY_LEFTCTRL,	KEY_SYSRQ,	\
+   KEY_KP4,		KEY_KP8,	KEY_KP5,	KEY_KP9,	\
+   KEY_KP6,		KEY_KP7,	KEY_KPCOMMA,	KEY_KPENTER,	\
+   KEY_KP1,		KEY_KPSLASH,	KEY_KP2,	KEY_KPPLUS,	\
+   KEY_KP3,		KEY_KPASTERISK,	KEY_KP0,	KEY_KPMINUS,	\
+   KEY_B,		KEY_V,		KEY_C,		KEY_X,		\
+   KEY_Z,		KEY_RESERVED,	KEY_RESERVED,   KEY_ESC,	\
+   KEY_6,		KEY_F10,	KEY_3,		KEY_F11,	\
+   KEY_KPDOT,		KEY_F9,		KEY_TAB /*KP*/,	KEY_F12,	\
+   KEY_H,		KEY_G,		KEY_F,		KEY_D,		\
+   KEY_S,		KEY_A,		KEY_RESERVED,	KEY_CAPSLOCK,	\
+   KEY_U,		KEY_Y,		KEY_T,		KEY_R,		\
+   KEY_E,		KEY_W,		KEY_Q,		KEY_TAB,	\
+   KEY_7,		KEY_6,		KEY_5,		KEY_4,		\
+   KEY_3,		KEY_2,		KEY_1,		KEY_GRAVE,	\
+   KEY_F13,		KEY_F14,	KEY_F15,	KEY_F16,	\
+   KEY_F17,		KEY_F18,	KEY_F19,	KEY_F20,	\
+   KEY_MENU,		KEY_F4,		KEY_F3,		KEY_F2,		\
+   KEY_F1,		KEY_VOLUMEUP,	KEY_STOP,	KEY_SENDFILE,	\
+   KEY_SYSRQ,		KEY_F5,		KEY_F6,		KEY_F7,		\
+   KEY_F8,		KEY_VOLUMEDOWN,	KEY_DEL_EOL,	KEY_DEL_EOS,	\
+   KEY_8,		KEY_9,		KEY_0,		KEY_MINUS,	\
+   KEY_EQUAL,		KEY_BACKSPACE,	KEY_INS_LINE,	KEY_DEL_LINE,	\
+   KEY_I,		KEY_O,		KEY_P,		KEY_LEFTBRACE,	\
+   KEY_RIGHTBRACE,	KEY_BACKSLASH,	KEY_INSERT,	KEY_DELETE,	\
+   KEY_J,		KEY_K,		KEY_L,		KEY_SEMICOLON,	\
+   KEY_APOSTROPHE,	KEY_ENTER,	KEY_HOME,	KEY_PAGEUP,	\
+   KEY_M,		KEY_COMMA,	KEY_DOT,	KEY_SLASH,	\
+   KEY_BACKSLASH,	KEY_SELECT,	KEY_102ND,	KEY_PAGEDOWN,	\
+   KEY_N,		KEY_SPACE,	KEY_NEXT,	KEY_RESERVED,	\
+   KEY_LEFT,		KEY_DOWN,	KEY_UP,		KEY_RIGHT
+
+
+#define HIL_KEYCODES_SET3_TBLSIZE 128
+#define HIL_KEYCODES_SET3 	\
+  KEY_RESERVED,	KEY_ESC,	KEY_1,		KEY_2,			\
+  KEY_3,	KEY_4,		KEY_5,		KEY_6,			\
+  KEY_7,	KEY_8,		KEY_9,		KEY_0,			\
+  KEY_MINUS,	KEY_EQUAL,	KEY_BACKSPACE,	KEY_TAB,		\
+  KEY_Q,	KEY_W,		KEY_E,		KEY_R,			\
+  KEY_T,	KEY_Y,		KEY_U,		KEY_I,			\
+  KEY_O,	KEY_P,		KEY_LEFTBRACE,	KEY_RIGHTBRACE,		\
+  KEY_ENTER,	KEY_LEFTCTRL,	KEY_A,		KEY_S,			\
+  KEY_D,	KEY_F,		KEY_G,		KEY_H,			\
+  KEY_J,	KEY_K,		KEY_L,		KEY_SEMICOLON,		\
+  KEY_APOSTROPHE,KEY_GRAVE,	KEY_LEFTSHIFT,	KEY_BACKSLASH,		\
+  KEY_Z,	KEY_X,		KEY_C,		KEY_V,			\
+  KEY_B,	KEY_N,		KEY_M,		KEY_COMMA,		\
+  KEY_DOT,	KEY_SLASH,	KEY_RIGHTSHIFT,	KEY_KPASTERISK,		\
+  KEY_LEFTALT,	KEY_SPACE,	KEY_CAPSLOCK,	KEY_F1,			\
+  KEY_F2,	KEY_F3,		KEY_F4,		KEY_F5,			\
+  KEY_F6,	KEY_F7,		KEY_F8,		KEY_F9,			\
+  KEY_F10,	KEY_NUMLOCK,	KEY_SCROLLLOCK,	KEY_KP7,		\
+  KEY_KP8,	KEY_KP9,	KEY_KPMINUS,	KEY_KP4,		\
+  KEY_KP5,	KEY_KP6,	KEY_KPPLUS,	KEY_KP1,		\
+  KEY_KP2,	KEY_KP3,	KEY_KP0,	KEY_KPDOT,		\
+  KEY_SYSRQ,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_UP,	KEY_LEFT,	KEY_DOWN,	KEY_RIGHT,		\
+  KEY_HOME,	KEY_PAGEUP,	KEY_END,	KEY_PAGEDOWN,		\
+  KEY_INSERT,	KEY_DELETE,	KEY_102ND,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_F1,	KEY_F2,		KEY_F3,		KEY_F4,			\
+  KEY_F5,	KEY_F6,		KEY_F7,		KEY_F8,			\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED
+
+
+/* Response to POL command, the "poll record header" */
+
+#define HIL_POL_NUM_AXES_MASK	0x03	/* Number of axis reported */
+#define HIL_POL_CTS		0x04	/* Device ready to receive data */
+#define HIL_POL_STATUS_PENDING	0x08	/* Device has status to report */
+#define HIL_POL_CHARTYPE_MASK	0x70	/* Type of character data to follow */
+#define HIL_POL_CHARTYPE_NONE	0x00	/* No character data to follow */
+#define HIL_POL_CHARTYPE_RSVD1	0x10	/* Reserved Set 1 */
+#define HIL_POL_CHARTYPE_ASCII	0x20	/* U.S. ASCII */
+#define HIL_POL_CHARTYPE_BINARY	0x30	/* Binary data */
+#define HIL_POL_CHARTYPE_SET1	0x40	/* Keycode Set 1 */
+#define HIL_POL_CHARTYPE_RSVD2	0x50	/* Reserved Set 2 */
+#define HIL_POL_CHARTYPE_SET2	0x60	/* Keycode Set 2 */
+#define HIL_POL_CHARTYPE_SET3	0x70	/* Keycode Set 3 */
+#define HIL_POL_AXIS_ALT	0x80	/* Data is from axis set 2 */
+
+
+#endif /* _HIL_H_ */
diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h
new file mode 100644
index 00000000000..8df29ca48a1
--- /dev/null
+++ b/include/linux/hil_mlc.h
@@ -0,0 +1,168 @@
+/*
+ * HP Human Interface Loop Master Link Controller driver.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ */
+
+#include <linux/hil.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <asm/semaphore.h>
+#include <linux/serio.h>
+#include <linux/list.h>
+
+typedef struct hil_mlc hil_mlc;
+
+/* The HIL has a complicated state engine.
+ * We define the structure of nodes in the state engine here.
+ */
+enum hilse_act {
+  	/* HILSE_OUT prepares to receive input if the next node
+	 * is an IN or EXPECT, and then sends the given packet.
+	 */
+	HILSE_OUT = 0,
+
+  	/* HILSE_CTS checks if the loop is busy. */
+	HILSE_CTS,
+
+	/* HILSE_OUT_LAST sends the given command packet to 
+	 * the last configured/running device on the loop.
+	 */
+	HILSE_OUT_LAST,
+
+	/* HILSE_OUT_DISC sends the given command packet to
+	 * the next device past the last configured/running one.
+	 */
+	HILSE_OUT_DISC,
+
+	/* HILSE_FUNC runs a callback function with given arguments.
+	 * a positive return value causes the "ugly" branch to be taken.
+	 */
+	HILSE_FUNC,
+
+  	/* HILSE_IN simply expects any non-errored packet to arrive 
+	 * within arg usecs.
+	 */
+	HILSE_IN		= 0x100,
+
+  	/* HILSE_EXPECT expects a particular packet to arrive 
+	 * within arg usecs, any other packet is considered an error.
+	 */
+	HILSE_EXPECT,
+
+  	/* HILSE_EXPECT_LAST as above but dev field should be last 
+	 * discovered/operational device.
+	 */
+	HILSE_EXPECT_LAST,
+
+  	/* HILSE_EXPECT_LAST as above but dev field should be first 
+	 * undiscovered/inoperational device.
+	 */
+	HILSE_EXPECT_DISC
+};
+
+typedef int	(hilse_func) (hil_mlc *mlc, int arg);
+struct hilse_node {
+	enum hilse_act		act;	/* How to process this node         */
+	union {
+		hilse_func	*func;	/* Function to call if HILSE_FUNC   */
+		hil_packet	packet;	/* Packet to send or to compare     */
+	} object;
+	int			arg;	/* Timeout in usec or parm for func */
+	int			good;	/* Node to jump to on success       */
+	int			bad;	/* Node to jump to on error         */
+	int			ugly;	/* Node to jump to on timeout       */
+};
+
+/* Methods for back-end drivers, e.g. hp_sdc_mlc */
+typedef int	(hil_mlc_cts) (hil_mlc *mlc);
+typedef void	(hil_mlc_out) (hil_mlc *mlc);
+typedef int	(hil_mlc_in)  (hil_mlc *mlc, suseconds_t timeout);
+
+struct hil_mlc_devinfo {
+	uint8_t	idd[16];	/* Device ID Byte and Describe Record */
+	uint8_t	rsc[16];	/* Security Code Header and Record */
+	uint8_t	exd[16];	/* Extended Describe Record */
+	uint8_t	rnm[16];	/* Device name as returned by RNM command */
+};
+
+struct hil_mlc_serio_map {
+	hil_mlc *mlc;
+	int di_revmap;
+	int didx;
+};
+
+/* How many (possibly old/detached) devices the we try to keep track of */
+#define HIL_MLC_DEVMEM 16
+
+struct hil_mlc {
+	struct list_head	list;	/* hil_mlc is organized as linked list */
+
+	rwlock_t		lock;
+
+	void *priv; /* Data specific to a particular type of MLC */
+
+	int 			seidx;	/* Current node in state engine */
+	int			istarted, ostarted;
+
+	hil_mlc_cts		*cts;
+	struct semaphore	csem;   /* Raised when loop idle */
+
+	hil_mlc_out		*out;
+	struct semaphore	osem;   /* Raised when outpacket dispatched */
+	hil_packet		opacket;
+
+	hil_mlc_in		*in;
+	struct semaphore	isem;   /* Raised when a packet arrives */
+	hil_packet		ipacket[16];
+	hil_packet		imatch;
+	int			icount;
+	struct timeval		instart;
+	suseconds_t		intimeout;
+
+	int			ddi;	/* Last operational device id */
+	int			lcv;	/* LCV to throttle loops */
+	struct timeval		lcv_tv; /* Time loop was started */
+
+	int			di_map[7]; /* Maps below items to live devs */
+	struct hil_mlc_devinfo	di[HIL_MLC_DEVMEM];
+	struct serio		*serio[HIL_MLC_DEVMEM];
+	struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM];
+	hil_packet		serio_opacket[HIL_MLC_DEVMEM];
+	int			serio_oidx[HIL_MLC_DEVMEM];
+	struct hil_mlc_devinfo	di_scratch; /* Temporary area */
+
+	int			opercnt;
+
+	struct tasklet_struct	*tasklet;
+};
+
+int hil_mlc_register(hil_mlc *mlc);
+int hil_mlc_unregister(hil_mlc *mlc);
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
new file mode 100644
index 00000000000..debd7151531
--- /dev/null
+++ b/include/linux/hp_sdc.h
@@ -0,0 +1,300 @@
+/*
+ * HP i8042 System Device Controller -- header
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * 
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ * System Device Controller Microprocessor Firmware Theory of Operation
+ * 	for Part Number 1820-4784 Revision B.  Dwg No. A-1820-4784-2
+ *
+ */
+
+#ifndef _LINUX_HP_SDC_H
+#define _LINUX_HP_SDC_H
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#if defined(__hppa__)
+#include <asm/hardware.h>
+#endif
+
+
+/* No 4X status reads take longer than this (in usec).
+ */
+#define HP_SDC_MAX_REG_DELAY 20000
+
+typedef void (hp_sdc_irqhook) (int irq, void *dev_id, 
+			       uint8_t status, uint8_t data);
+
+int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback);
+
+typedef struct {
+	int actidx;	/* Start of act.  Acts are atomic WRT I/O to SDC */
+	int idx;	/* Index within the act */
+	int endidx;	/* transaction is over and done if idx == endidx */
+	uint8_t *seq;	/* commands/data for the transaction */
+	union {
+	  hp_sdc_irqhook   *irqhook;	/* Callback, isr or tasklet context */
+	  struct semaphore *semaphore;	/* Semaphore to sleep on. */
+	} act;
+} hp_sdc_transaction;
+int hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
+int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
+
+/* The HP_SDC_ACT* values are peculiar to this driver.
+ * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another
+ * act to perform the dealloc.
+ */
+#define HP_SDC_ACT_PRECMD	0x01		/* Send a command first */
+#define HP_SDC_ACT_DATAREG	0x02		/* Set data registers */
+#define HP_SDC_ACT_DATAOUT	0x04		/* Send data bytes */
+#define HP_SDC_ACT_POSTCMD      0x08            /* Send command after */
+#define HP_SDC_ACT_DATAIN	0x10		/* Collect data after */
+#define HP_SDC_ACT_DURING	0x1f
+#define HP_SDC_ACT_SEMAPHORE    0x20            /* Raise semaphore after */
+#define HP_SDC_ACT_CALLBACK	0x40		/* Pass data to IRQ handler */
+#define HP_SDC_ACT_DEALLOC	0x80		/* Destroy transaction after */
+#define HP_SDC_ACT_AFTER	0xe0
+#define HP_SDC_ACT_DEAD		0x60		/* Act timed out. */
+
+/* Rest of the flags are straightforward representation of the SDC interface */
+#define HP_SDC_STATUS_IBF	0x02	/* Input buffer full */
+
+#define HP_SDC_STATUS_IRQMASK	0xf0	/* Bits containing "level 1" irq */
+#define HP_SDC_STATUS_PERIODIC  0x10    /* Periodic 10ms timer */
+#define HP_SDC_STATUS_USERTIMER 0x20    /* "Special purpose" timer */
+#define HP_SDC_STATUS_TIMER     0x30    /* Both PERIODIC and USERTIMER */
+#define HP_SDC_STATUS_REG	0x40	/* Data from an i8042 register */
+#define HP_SDC_STATUS_HILCMD    0x50	/* Command from HIL MLC */
+#define HP_SDC_STATUS_HILDATA   0x60	/* Data from HIL MLC */
+#define HP_SDC_STATUS_PUP	0x70	/* Sucessful power-up self test */
+#define HP_SDC_STATUS_KCOOKED	0x80	/* Key from cooked kbd */
+#define HP_SDC_STATUS_KRPG	0xc0	/* Key from Repeat Gen */
+#define HP_SDC_STATUS_KMOD_SUP	0x10	/* Shift key is up */
+#define HP_SDC_STATUS_KMOD_CUP	0x20	/* Control key is up */
+
+#define HP_SDC_NMISTATUS_FHS	0x40	/* NMI is a fast handshake irq */
+
+/* Internal i8042 registers (there are more, but they are not too useful). */
+
+#define HP_SDC_USE		0x02	/* Resource usage (including OB bit) */
+#define HP_SDC_IM		0x04	/* Interrupt mask */
+#define HP_SDC_CFG		0x11	/* Configuration register */
+#define HP_SDC_KBLANGUAGE	0x12	/* Keyboard language */
+
+#define HP_SDC_D0		0x70	/* General purpose data buffer 0 */
+#define HP_SDC_D1		0x71	/* General purpose data buffer 1 */
+#define HP_SDC_D2		0x72	/* General purpose data buffer 2 */
+#define HP_SDC_D3		0x73	/* General purpose data buffer 3 */
+#define HP_SDC_VT1		0x74	/* Timer for voice 1 */
+#define HP_SDC_VT2		0x75	/* Timer for voice 2 */
+#define HP_SDC_VT3		0x76	/* Timer for voice 3 */
+#define HP_SDC_VT4		0x77	/* Timer for voice 4 */
+#define HP_SDC_KBN		0x78	/* Which HIL devs are Nimitz */
+#define HP_SDC_KBC		0x79	/* Which HIL devs are cooked kbds */
+#define HP_SDC_LPS		0x7a	/* i8042's view of HIL status */
+#define HP_SDC_LPC		0x7b	/* i8042's view of HIL "control" */
+#define HP_SDC_RSV  		0x7c	/* Reserved "for testing" */
+#define HP_SDC_LPR		0x7d    /* i8042 count of HIL reconfigs */
+#define HP_SDC_XTD		0x7e    /* "Extended Configuration" register */
+#define HP_SDC_STR		0x7f    /* i8042 self-test result */
+
+/* Bitfields for above registers */
+#define HP_SDC_USE_LOOP		0x04	/* Command is currently on the loop. */
+
+#define HP_SDC_IM_MASK          0x1f    /* these bits not part of cmd/status */
+#define HP_SDC_IM_FH		0x10	/* Mask the fast handshake irq */
+#define HP_SDC_IM_PT		0x08	/* Mask the periodic timer irq */
+#define HP_SDC_IM_TIMERS	0x04	/* Mask the MT/DT/CT irq */
+#define HP_SDC_IM_RESET		0x02	/* Mask the reset key irq */
+#define HP_SDC_IM_HIL		0x01	/* Mask the HIL MLC irq */
+
+#define HP_SDC_CFG_ROLLOVER	0x08	/* WTF is "N-key rollover"? */
+#define HP_SDC_CFG_KBD		0x10	/* There is a keyboard */
+#define HP_SDC_CFG_NEW		0x20	/* Supports/uses HIL MLC */
+#define HP_SDC_CFG_KBD_OLD	0x03	/* keyboard code for non-HIL */
+#define HP_SDC_CFG_KBD_NEW	0x07	/* keyboard code from HIL autoconfig */
+#define HP_SDC_CFG_REV		0x40	/* Code revision bit */
+#define HP_SDC_CFG_IDPROM	0x80	/* IDPROM present in kbd (not HIL) */
+
+#define HP_SDC_LPS_NDEV		0x07	/* # devices autoconfigured on HIL */
+#define HP_SDC_LPS_ACSUCC	0x08	/* loop autoconfigured successfully */
+#define HP_SDC_LPS_ACFAIL	0x80	/* last loop autoconfigure failed */
+
+#define HP_SDC_LPC_APE_IPF	0x01	/* HIL MLC APE/IPF (autopoll) set */
+#define HP_SDC_LPC_ARCONERR	0x02	/* i8042 autoreconfigs loop on err */
+#define HP_SDC_LPC_ARCQUIET	0x03	/* i8042 doesn't report autoreconfigs*/
+#define HP_SDC_LPC_COOK		0x10	/* i8042 cooks devices in _KBN */
+#define HP_SDC_LPC_RC		0x80	/* causes autoreconfig */
+
+#define HP_SDC_XTD_REV		0x07	/* contains revision code */
+#define HP_SDC_XTD_REV_STRINGS(val, str) \
+switch (val) {						\
+	case 0x1: str = "1820-3712"; break;		\
+	case 0x2: str = "1820-4379"; break;		\
+	case 0x3: str = "1820-4784"; break;		\
+	default: str = "unknown";			\
+};
+#define HP_SDC_XTD_BEEPER	0x08	/* TI SN76494 beeper available */
+#define HP_SDC_XTD_BBRTC	0x20	/* OKI MSM-58321 BBRTC present */
+
+#define HP_SDC_CMD_LOAD_RT	0x31	/* Load real time (from 8042) */
+#define HP_SDC_CMD_LOAD_FHS	0x36	/* Load the fast handshake timer */
+#define HP_SDC_CMD_LOAD_MT	0x38	/* Load the match timer */
+#define HP_SDC_CMD_LOAD_DT	0x3B	/* Load the delay timer */
+#define HP_SDC_CMD_LOAD_CT	0x3E	/* Load the cycle timer */
+
+#define HP_SDC_CMD_SET_IM	0x40    /* 010xxxxx == set irq mask */
+
+/* The documents provided do not explicitly state that all registers betweem 
+ * 0x01 and 0x1f inclusive can be read by sending their register index as a 
+ * command, but this is implied and appears to be the case.
+ */
+#define HP_SDC_CMD_READ_RAM	0x00	/* Load from i8042 RAM (autoinc) */
+#define HP_SDC_CMD_READ_USE	0x02	/* Undocumented! Load from usage reg */
+#define HP_SDC_CMD_READ_IM	0x04	/* Load current interrupt mask */
+#define HP_SDC_CMD_READ_KCC	0x11	/* Load primary kbd config code */
+#define HP_SDC_CMD_READ_KLC	0x12	/* Load primary kbd language code */
+#define HP_SDC_CMD_READ_T1	0x13	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T2	0x14	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T3	0x15	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T4	0x16	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T5	0x17	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_D0	0xf0	/* Load from i8042 RAM location 0x70 */
+#define HP_SDC_CMD_READ_D1	0xf1	/* Load from i8042 RAM location 0x71 */
+#define HP_SDC_CMD_READ_D2	0xf2	/* Load from i8042 RAM location 0x72 */
+#define HP_SDC_CMD_READ_D3	0xf3	/* Load from i8042 RAM location 0x73 */
+#define HP_SDC_CMD_READ_VT1	0xf4	/* Load from i8042 RAM location 0x74 */
+#define HP_SDC_CMD_READ_VT2	0xf5	/* Load from i8042 RAM location 0x75 */
+#define HP_SDC_CMD_READ_VT3	0xf6	/* Load from i8042 RAM location 0x76 */
+#define HP_SDC_CMD_READ_VT4	0xf7	/* Load from i8042 RAM location 0x77 */
+#define HP_SDC_CMD_READ_KBN	0xf8	/* Load from i8042 RAM location 0x78 */
+#define HP_SDC_CMD_READ_KBC	0xf9	/* Load from i8042 RAM location 0x79 */
+#define HP_SDC_CMD_READ_LPS	0xfa	/* Load from i8042 RAM location 0x7a */
+#define HP_SDC_CMD_READ_LPC	0xfb	/* Load from i8042 RAM location 0x7b */
+#define HP_SDC_CMD_READ_RSV	0xfc	/* Load from i8042 RAM location 0x7c */
+#define HP_SDC_CMD_READ_LPR	0xfd	/* Load from i8042 RAM location 0x7d */
+#define HP_SDC_CMD_READ_XTD	0xfe	/* Load from i8042 RAM location 0x7e */
+#define HP_SDC_CMD_READ_STR	0xff	/* Load from i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_SET_ARD	0xA0	/* Set emulated autorepeat delay */
+#define HP_SDC_CMD_SET_ARR	0xA2	/* Set emulated autorepeat rate */
+#define HP_SDC_CMD_SET_BELL	0xA3	/* Set voice 3 params for "beep" cmd */
+#define HP_SDC_CMD_SET_RPGR	0xA6	/* Set "RPG" irq rate (doesn't work) */
+#define HP_SDC_CMD_SET_RTMS	0xAD	/* Set the RTC time (milliseconds) */
+#define HP_SDC_CMD_SET_RTD	0xAF	/* Set the RTC time (days) */
+#define HP_SDC_CMD_SET_FHS	0xB2	/* Set fast handshake timer */
+#define HP_SDC_CMD_SET_MT	0xB4	/* Set match timer */
+#define HP_SDC_CMD_SET_DT	0xB7	/* Set delay timer */
+#define HP_SDC_CMD_SET_CT	0xBA	/* Set cycle timer */
+#define HP_SDC_CMD_SET_RAMP	0xC1	/* Reset READ_RAM autoinc counter */
+#define HP_SDC_CMD_SET_D0	0xe0	/* Load to i8042 RAM location 0x70 */
+#define HP_SDC_CMD_SET_D1	0xe1	/* Load to i8042 RAM location 0x71 */
+#define HP_SDC_CMD_SET_D2	0xe2	/* Load to i8042 RAM location 0x72 */
+#define HP_SDC_CMD_SET_D3	0xe3	/* Load to i8042 RAM location 0x73 */
+#define HP_SDC_CMD_SET_VT1	0xe4	/* Load to i8042 RAM location 0x74 */
+#define HP_SDC_CMD_SET_VT2	0xe5	/* Load to i8042 RAM location 0x75 */
+#define HP_SDC_CMD_SET_VT3	0xe6	/* Load to i8042 RAM location 0x76 */
+#define HP_SDC_CMD_SET_VT4	0xe7	/* Load to i8042 RAM location 0x77 */
+#define HP_SDC_CMD_SET_KBN	0xe8	/* Load to i8042 RAM location 0x78 */
+#define HP_SDC_CMD_SET_KBC	0xe9	/* Load to i8042 RAM location 0x79 */
+#define HP_SDC_CMD_SET_LPS	0xea	/* Load to i8042 RAM location 0x7a */
+#define HP_SDC_CMD_SET_LPC	0xeb	/* Load to i8042 RAM location 0x7b */
+#define HP_SDC_CMD_SET_RSV	0xec	/* Load to i8042 RAM location 0x7c */
+#define HP_SDC_CMD_SET_LPR	0xed	/* Load to i8042 RAM location 0x7d */
+#define HP_SDC_CMD_SET_XTD	0xee	/* Load to i8042 RAM location 0x7e */
+#define HP_SDC_CMD_SET_STR	0xef	/* Load to i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_DO_RTCW	0xc2	/* i8042 RAM 0x70 --> RTC */
+#define HP_SDC_CMD_DO_RTCR	0xc3	/* RTC[0x70 0:3] --> irq/status/data */
+#define HP_SDC_CMD_DO_BEEP	0xc4	/* i8042 RAM 0x70-74  --> beeper,VT3 */
+#define HP_SDC_CMD_DO_HIL	0xc5	/* i8042 RAM 0x70-73 --> 
+					   HIL MLC R0,R1 i8042 HIL watchdog */
+
+/* Values used to (de)mangle input/output to/from the HIL MLC */
+#define HP_SDC_DATA		0x40	/* Data from an 8042 register */
+#define HP_SDC_HIL_CMD		0x50	/* Data from HIL MLC R1/8042 */
+#define HP_SDC_HIL_R1MASK	0x0f	/* Contents of HIL MLC R1 0:3 */
+#define HP_SDC_HIL_AUTO		0x10	/* Set if POL results from i8042 */   
+#define HP_SDC_HIL_ISERR	0x80	/* Has meaning as in next 4 values */
+#define HP_SDC_HIL_RC_DONE	0x80	/* i8042 auto-configured loop */
+#define HP_SDC_HIL_ERR		0x81	/* HIL MLC R2 had a bit set */
+#define HP_SDC_HIL_TO		0x82	/* i8042 HIL watchdog expired */
+#define HP_SDC_HIL_RC		0x84	/* i8042 is auto-configuring loop */
+#define HP_SDC_HIL_DAT		0x60	/* Data from HIL MLC R0 */
+
+
+typedef struct {
+	rwlock_t	ibf_lock;
+	rwlock_t	lock;		/* user/tasklet lock */
+	rwlock_t	rtq_lock;	/* isr/tasklet lock */
+	rwlock_t	hook_lock;	/* isr/user lock for handler add/del */
+
+	unsigned int	irq, nmi;	/* Our IRQ lines */
+	unsigned long	base_io, status_io, data_io; /* Our IO ports */
+
+	uint8_t		im;		/* Interrupt mask */
+	int		set_im; 	/* Interrupt mask needs to be set. */
+
+	int		ibf;		/* Last known status of IBF flag */
+	uint8_t		wi;		/* current i8042 write index */
+	uint8_t		r7[4];          /* current i8042[0x70 - 0x74] values */
+	uint8_t		r11, r7e;	/* Values from version/revision regs */
+
+	hp_sdc_irqhook	*timer, *reg, *hil, *pup, *cooked;
+
+#define HP_SDC_QUEUE_LEN 16
+	hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
+
+	int		rcurr, rqty;	/* Current read transact in process */
+	struct timeval	rtv;		/* Time when current read started */
+	int		wcurr;		/* Current write transact in process */
+
+	int		dev_err;	/* carries status from registration */
+#if defined(__hppa__)
+	struct parisc_device	*dev;
+#elif defined(__mc68000__)
+	void		*dev;
+#else
+#error No support for device registration on this arch yet.
+#endif
+
+	struct timer_list kicker;	/* Keeps below task alive */
+	struct tasklet_struct	task;
+
+} hp_i8042_sdc;
+
+#endif /* _LINUX_HP_SDC_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index e8c296ff625..d7836311ada 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -644,6 +644,7 @@ struct input_absinfo {
 #define BUS_ADB			0x17
 #define BUS_I2C			0x18
 #define BUS_HOST		0x19
+#define BUS_GSC			0x1A
 
 /*
  * Values describing the status of an effect