aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2009-02-14 23:06:44 -0800
committerDavid S. Miller <davem@davemloft.net>2009-02-14 23:06:44 -0800
commitac178ef0ae9eb44fd527d87aa9b6394e05f56e1f (patch)
tree5d6bd46ecf9ce989134d3c460e1ecf5dd1fceadc /include
parentf3a7c66b5ce0b75a9774a50b5dcce93e5ba28370 (diff)
parent6d08b9b9c6eb2414c4a037407dd121298a74fb36 (diff)
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
Diffstat (limited to 'include')
-rw-r--r--include/linux/nl80211.h65
-rw-r--r--include/net/cfg80211.h154
-rw-r--r--include/net/mac80211.h10
-rw-r--r--include/net/wireless.h3
4 files changed, 228 insertions, 4 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 4bc27049f4e..8802d1bda38 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -143,6 +143,13 @@
* added to all specified management frames generated by
* kernel/firmware/driver.
*
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ * NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ * partial scan results may be available
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -192,6 +199,11 @@ enum nl80211_commands {
NL80211_CMD_GET_REG,
+ NL80211_CMD_GET_SCAN,
+ NL80211_CMD_TRIGGER_SCAN,
+ NL80211_CMD_NEW_SCAN_RESULTS,
+ NL80211_CMD_SCAN_ABORTED,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -305,6 +317,18 @@ enum nl80211_commands {
* @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
* %NL80211_CMD_SET_MGMT_EXTRA_IE).
*
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ * a single scan request, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ * scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
+ * scan result list changes (BSS expired or added) so that applications
+ * can verify that they got a single, consistent snapshot (when all dump
+ * messages carried the same generation number)
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -372,6 +396,13 @@ enum nl80211_attrs {
NL80211_ATTR_MGMT_SUBTYPE,
NL80211_ATTR_IE,
+ NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+ NL80211_ATTR_SCAN_FREQUENCIES,
+ NL80211_ATTR_SCAN_SSIDS,
+ NL80211_ATTR_SCAN_GENERATION,
+ NL80211_ATTR_BSS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -841,4 +872,38 @@ enum nl80211_channel_type {
NL80211_CHAN_HT40MINUS,
NL80211_CHAN_HT40PLUS
};
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ * raw information elements from the probe response/beacon (bin)
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ * in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ * in unspecified units, scaled to 0..100 (u8)
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+ __NL80211_BSS_INVALID,
+ NL80211_BSS_BSSID,
+ NL80211_BSS_FREQUENCY,
+ NL80211_BSS_TSF,
+ NL80211_BSS_BEACON_INTERVAL,
+ NL80211_BSS_CAPABILITY,
+ NL80211_BSS_INFORMATION_ELEMENTS,
+ NL80211_BSS_SIGNAL_MBM,
+ NL80211_BSS_SIGNAL_UNSPEC,
+
+ /* keep last */
+ __NL80211_BSS_AFTER_LAST,
+ NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index dd1fd51638f..c0d1f5b708c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4,6 +4,10 @@
#include <linux/netlink.h>
#include <linux/skbuff.h>
#include <linux/nl80211.h>
+#include <linux/if_ether.h>
+#include <linux/ieee80211.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
#include <net/genetlink.h>
/* remove once we remove the wext stuff */
#include <net/iw_handler.h>
@@ -505,6 +509,85 @@ struct wiphy;
struct ieee80211_channel;
/**
+ * struct cfg80211_ssid - SSID description
+ * @ssid: the SSID
+ * @ssid_len: length of the ssid
+ */
+struct cfg80211_ssid {
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+};
+
+/**
+ * struct cfg80211_scan_request - scan request description
+ *
+ * @ssids: SSIDs to scan for (active scan only)
+ * @n_ssids: number of SSIDs
+ * @channels: channels to scan on.
+ * @n_channels: number of channels for each band
+ * @wiphy: the wiphy this was for
+ * @ifidx: the interface index
+ */
+struct cfg80211_scan_request {
+ struct cfg80211_ssid *ssids;
+ int n_ssids;
+ struct ieee80211_channel **channels;
+ u32 n_channels;
+
+ /* internal */
+ struct wiphy *wiphy;
+ int ifidx;
+};
+
+/**
+ * enum cfg80211_signal_type - signal type
+ *
+ * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
+ * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
+ * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
+ */
+enum cfg80211_signal_type {
+ CFG80211_SIGNAL_TYPE_NONE,
+ CFG80211_SIGNAL_TYPE_MBM,
+ CFG80211_SIGNAL_TYPE_UNSPEC,
+};
+
+/**
+ * struct cfg80211_bss - BSS description
+ *
+ * This structure describes a BSS (which may also be a mesh network)
+ * for use in scan results and similar.
+ *
+ * @bssid: BSSID of the BSS
+ * @tsf: timestamp of last received update
+ * @beacon_interval: the beacon interval as from the frame
+ * @capability: the capability field in host byte order
+ * @information_elements: the information elements (Note that there
+ * is no guarantee that these are well-formed!)
+ * @len_information_elements: total length of the information elements
+ * @signal: signal strength value
+ * @signal_type: signal type
+ * @free_priv: function pointer to free private data
+ * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
+ */
+struct cfg80211_bss {
+ struct ieee80211_channel *channel;
+
+ u8 bssid[ETH_ALEN];
+ u64 tsf;
+ u16 beacon_interval;
+ u16 capability;
+ u8 *information_elements;
+ size_t len_information_elements;
+
+ s32 signal;
+ enum cfg80211_signal_type signal_type;
+
+ void (*free_priv)(struct cfg80211_bss *bss);
+ u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
* struct cfg80211_ops - backend description for wireless configuration
*
* This struct is registered by fullmac card drivers and/or wireless stacks
@@ -571,6 +654,11 @@ struct ieee80211_channel;
* @set_channel: Set channel
*
* @set_mgmt_extra_ie: Set extra IE data for management frames
+ *
+ * @scan: Request to do a scan. If returning zero, the scan request is given
+ * the driver, and will be valid until passed to cfg80211_scan_done().
+ * For scan results, call cfg80211_inform_bss(); you can call this outside
+ * the scan/scan_done bracket too.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
@@ -648,6 +736,9 @@ struct cfg80211_ops {
int (*set_mgmt_extra_ie)(struct wiphy *wiphy,
struct net_device *dev,
struct mgmt_extra_ie_params *params);
+
+ int (*scan)(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_scan_request *request);
};
/* temporary wext handlers */
@@ -658,5 +749,68 @@ int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
u32 *mode, char *extra);
int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
u32 *mode, char *extra);
+int cfg80211_wext_siwscan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
+int cfg80211_wext_giwscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra);
+
+/**
+ * cfg80211_scan_done - notify that scan finished
+ *
+ * @request: the corresponding scan request
+ * @aborted: set to true if the scan was aborted for any reason,
+ * userspace will be notified of that
+ */
+void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
+
+/**
+ * cfg80211_inform_bss - inform cfg80211 of a new BSS
+ *
+ * @wiphy: the wiphy reporting the BSS
+ * @bss: the found BSS
+ * @gfp: context flags
+ *
+ * This informs cfg80211 that BSS information was found and
+ * the BSS should be updated/added.
+ */
+struct cfg80211_bss*
+cfg80211_inform_bss_frame(struct wiphy *wiphy,
+ struct ieee80211_channel *channel,
+ struct ieee80211_mgmt *mgmt, size_t len,
+ s32 signal, enum cfg80211_signal_type sigtype,
+ gfp_t gfp);
+
+struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
+ struct ieee80211_channel *channel,
+ const u8 *bssid,
+ const u8 *ssid, size_t ssid_len,
+ u16 capa_mask, u16 capa_val);
+static inline struct cfg80211_bss *
+cfg80211_get_ibss(struct wiphy *wiphy,
+ struct ieee80211_channel *channel,
+ const u8 *ssid, size_t ssid_len)
+{
+ return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
+ WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+}
+
+struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
+ struct ieee80211_channel *channel,
+ const u8 *meshid, size_t meshidlen,
+ const u8 *meshcfg);
+void cfg80211_put_bss(struct cfg80211_bss *bss);
+/**
+ * cfg80211_unlink_bss - unlink BSS from internal data structures
+ * @wiphy: the wiphy
+ * @bss: the bss to remove
+ *
+ * This function removes the given BSS from the internal data structures
+ * thereby making it no longer show up in scan results etc. Use this
+ * function when you detect a BSS is gone. Normally BSSes will also time
+ * out, so it is not necessary to use this function at all.
+ */
+void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
#endif /* __NET_CFG80211_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 409e2c69269..88fa3e03e3e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1354,11 +1354,11 @@ enum ieee80211_ampdu_mlme_action {
*
* @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
* this is only used for IBSS mode BSSID merging and debugging. Is not a
- * required function. Must be atomic.
+ * required function.
*
* @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
* Currently, this is only used for IBSS mode debugging. Is not a
- * required function. Must be atomic.
+ * required function.
*
* @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
* with other STAs in the IBSS. This is only used in IBSS mode. This
@@ -1406,7 +1406,8 @@ struct ieee80211_ops {
void (*update_tkip_key)(struct ieee80211_hw *hw,
struct ieee80211_key_conf *conf, const u8 *address,
u32 iv32, u16 *phase1key);
- int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len);
+ int (*hw_scan)(struct ieee80211_hw *hw,
+ struct cfg80211_scan_request *req);
int (*get_stats)(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
@@ -1844,8 +1845,9 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
* mac80211 that the scan finished.
*
* @hw: the hardware that finished the scan
+ * @aborted: set to true if scan was aborted
*/
-void ieee80211_scan_completed(struct ieee80211_hw *hw);
+void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
/**
* ieee80211_iterate_active_interfaces - iterate active interfaces
diff --git a/include/net/wireless.h b/include/net/wireless.h
index a42c1562d52..1c6285eb166 100644
--- a/include/net/wireless.h
+++ b/include/net/wireless.h
@@ -213,6 +213,9 @@ struct wiphy {
bool custom_regulatory;
bool strict_regulatory;
+ int bss_priv_size;
+ u8 max_scan_ssids;
+
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered