Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (107 commits)
  smc911x: fix compilation breakage wjen debug is on
  [netdrvr] eexpress: minor corrections
  add NAPI support to sb1250-mac.c
  ixgb: ROUND_UP macro cleanup in drivers/net/ixgb
  e1000: ROUND_UP macro cleanup in drivers/net/e1000
  Generic HDLC sparse annotations
  e100: Optionally use I/O mode only to access register space
  e100: allow bad MAC address when running with invalid eeprom csum
  ehea: fix for dlpar support
  ehea: fix for sysfs entries
  3C509: Remove unnecessary include of <linux/pm_legacy.h>
  NetXen: Fix for vmalloc issues
  NetXen: Fixes for Power PC architecture
  NetXen: Port swap feature for multi port cards
  NetXen: Removal of redundant macros
  NetXen: Multi PCI support for Quad cards
  NetXen: Removal of redundant argument passing
  NetXen: Use multiple PCI functions
  [netdrvr e100] experiment with doing RX in a similar manner to eepro100
  [PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXX
  ...

9 files changed, 64 insertions, 71 deletions

diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
index 39d1c90fd2c..f529f70b1d8 100644
--- a/include/asm-powerpc/ucc_fast.h
+++ b/include/asm-powerpc/ucc_fast.h
@@ -159,6 +159,9 @@ struct ucc_fast_private {
 	struct ucc_fast *uf_regs;	/* a pointer to memory map of UCC regs. */
 	u32 *p_ucce;		/* a pointer to the event register in memory. */
 	u32 *p_uccm;		/* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	u16 *p_utodr;		/* pointer to the transmit on demand register */
+#endif
 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
 	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
 	int stopped_tx;		/* Whether channel has been stopped for Tx
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index abb64c437f6..73710d61777 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -120,44 +120,5 @@ struct fsl_spi_platform_data {
 	u32	sysclk;
 };
 
-/* Ethernet interface (phy management and speed)
-*/
-enum enet_interface {
-	ENET_10_MII,		/* 10 Base T,   MII interface */
-	ENET_10_RMII,		/* 10 Base T,  RMII interface */
-	ENET_10_RGMII,		/* 10 Base T, RGMII interface */
-	ENET_100_MII,		/* 100 Base T,   MII interface */
-	ENET_100_RMII,		/* 100 Base T,  RMII interface */
-	ENET_100_RGMII,		/* 100 Base T, RGMII interface */
-	ENET_1000_GMII,		/* 1000 Base T,  GMII interface */
-	ENET_1000_RGMII,	/* 1000 Base T, RGMII interface */
-	ENET_1000_TBI,		/* 1000 Base T,   TBI interface */
-	ENET_1000_RTBI		/* 1000 Base T,  RTBI interface */
-};
-
-struct ucc_geth_platform_data {
-	/* device specific information */
-	u32			device_flags;
-	u32			phy_reg_addr;
-
-	/* board specific information */
-	u32			board_flags;
-	u8			rx_clock;
-	u8			tx_clock;
-	u32			phy_id;
-	enum enet_interface	phy_interface;
-	u32			phy_interrupt;
-	u8			mac_addr[6];
-};
-
-/* Flags related to UCC Gigabit Ethernet device features */
-#define FSL_UGETH_DEV_HAS_GIGABIT		0x00000001
-#define FSL_UGETH_DEV_HAS_COALESCE		0x00000002
-#define FSL_UGETH_DEV_HAS_RMON			0x00000004
-
-/* Flags in ucc_geth_platform_data */
-#define FSL_UGETH_BRD_HAS_PHY_INTR		0x00000001
-				/* if not set use a timer */
-
 #endif /* _FSL_DEVICE_H_ */
 #endif /* __KERNEL__ */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index 0fe562af9c8..db390c511ad 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -43,8 +43,7 @@ struct hdlc_proto {
 	void (*stop)(struct net_device *dev); /* if open & !DCD */
 	void (*detach)(struct net_device *dev);
 	int (*ioctl)(struct net_device *dev, struct ifreq *ifr);
-	unsigned short (*type_trans)(struct sk_buff *skb,
-				     struct net_device *dev);
+	__be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev);
 	struct module *module;
 	struct hdlc_proto *next; /* next protocol in the list */
 };
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 5f21b0f68b4..1b0ddbb8a80 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1458,6 +1458,8 @@
 
 #define PCI_VENDOR_ID_TOSHIBA_2		0x102f
 #define PCI_DEVICE_ID_TOSHIBA_TC35815CF	0x0030
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU	0x0031
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939	0x0032
 #define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE	0x0105
 #define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC	0x0108
 #define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
diff --git a/include/linux/phy.h b/include/linux/phy.h
index edd4c88ca7d..2a659789f9c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -55,6 +55,7 @@ typedef enum {
 	PHY_INTERFACE_MODE_TBI,
 	PHY_INTERFACE_MODE_RMII,
 	PHY_INTERFACE_MODE_RGMII,
+	PHY_INTERFACE_MODE_RGMII_ID,
 	PHY_INTERFACE_MODE_RTBI
 } phy_interface_t;
 
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 48759b2f57d..0987aa7a6cf 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -186,7 +186,7 @@
  *	- Wireless Event capability in struct iw_range
  *	- Add support for relative TxPower (yick !)
  *
- * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
  * ----------
  *	- Add support for WPA/WPA2
  *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index e02d85f56e6..d56b2923d61 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -6,8 +6,8 @@
  * LAN access point) driver for Intersil Prism2/2.5/3.
  *
  * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * <j@w1.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
  *
  * Adaption to a generic IEEE 802.11 stack by James Ketrenos
  * <jketreno@linux.intel.com>
diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h
index eb476414fd7..b3d65e0bedd 100644
--- a/include/net/ieee80211_crypt.h
+++ b/include/net/ieee80211_crypt.h
@@ -3,8 +3,8 @@
  * for Intersil Prism2/2.5/3.
  *
  * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * <j@w1.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
  *
  * Adaption to a generic IEEE 802.11 stack by James Ketrenos
  * <jketreno@linux.intel.com>
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index 429b73892a5..a0c2b41a24d 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -66,7 +66,9 @@
  */
 #define IEEE80211_RADIOTAP_HDRLEN	64
 
-/* The radio capture header precedes the 802.11 header. */
+/* The radio capture header precedes the 802.11 header.
+ * All data in the header is little endian on all platforms.
+ */
 struct ieee80211_radiotap_header {
 	u8 it_version;		/* Version 0. Only increases
 				 * for drastic changes,
@@ -74,12 +76,12 @@ struct ieee80211_radiotap_header {
 				 * new fields does not count.
 				 */
 	u8 it_pad;
-	u16 it_len;		/* length of the whole
+	__le16 it_len;		/* length of the whole
 				 * header in bytes, including
 				 * it_version, it_pad,
 				 * it_len, and data fields.
 				 */
-	u32 it_present;		/* A bitmap telling which
+	__le32 it_present;	/* A bitmap telling which
 				 * fields are present. Set bit 31
 				 * (0x80000000) to extend the
 				 * bitmap by another 32 bits.
@@ -88,89 +90,102 @@ struct ieee80211_radiotap_header {
 				 */
 };
 
-/* Name                                 Data type       Units
- * ----                                 ---------       -----
+/* Name                                 Data type    Units
+ * ----                                 ---------    -----
  *
- * IEEE80211_RADIOTAP_TSFT              u64       microseconds
+ * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
  *
  *      Value in microseconds of the MAC's 64-bit 802.11 Time
  *      Synchronization Function timer when the first bit of the
  *      MPDU arrived at the MAC. For received frames, only.
  *
- * IEEE80211_RADIOTAP_CHANNEL           2 x u16   MHz, bitmap
+ * IEEE80211_RADIOTAP_CHANNEL           2 x __le16   MHz, bitmap
  *
  *      Tx/Rx frequency in MHz, followed by flags (see below).
  *
- * IEEE80211_RADIOTAP_FHSS              u16       see below
+ * IEEE80211_RADIOTAP_FHSS              __le16       see below
  *
  *      For frequency-hopping radios, the hop set (first byte)
  *      and pattern (second byte).
  *
- * IEEE80211_RADIOTAP_RATE              u8        500kb/s
+ * IEEE80211_RADIOTAP_RATE              u8           500kb/s
  *
  *      Tx/Rx data rate
  *
- * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     int8_t          decibels from
- *                                                      one milliwatt (dBm)
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
+ *                                                   one milliwatt (dBm)
  *
  *      RF signal power at the antenna, decibel difference from
  *      one milliwatt.
  *
- * IEEE80211_RADIOTAP_DBM_ANTNOISE      int8_t          decibels from
- *                                                      one milliwatt (dBm)
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
+ *                                                   one milliwatt (dBm)
  *
  *      RF noise power at the antenna, decibel difference from one
  *      milliwatt.
  *
- * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8        decibel (dB)
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
  *
  *      RF signal power at the antenna, decibel difference from an
  *      arbitrary, fixed reference.
  *
- * IEEE80211_RADIOTAP_DB_ANTNOISE       u8        decibel (dB)
+ * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
  *
  *      RF noise power at the antenna, decibel difference from an
  *      arbitrary, fixed reference point.
  *
- * IEEE80211_RADIOTAP_LOCK_QUALITY      u16       unitless
+ * IEEE80211_RADIOTAP_LOCK_QUALITY      __le16       unitless
  *
  *      Quality of Barker code lock. Unitless. Monotonically
  *      nondecreasing with "better" lock strength. Called "Signal
  *      Quality" in datasheets.  (Is there a standard way to measure
  *      this?)
  *
- * IEEE80211_RADIOTAP_TX_ATTENUATION    u16       unitless
+ * IEEE80211_RADIOTAP_TX_ATTENUATION    __le16       unitless
  *
  *      Transmit power expressed as unitless distance from max
  *      power set at factory calibration.  0 is max power.
  *      Monotonically nondecreasing with lower power levels.
  *
- * IEEE80211_RADIOTAP_DB_TX_ATTENUATION u16       decibels (dB)
+ * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16       decibels (dB)
  *
  *      Transmit power expressed as decibel distance from max power
  *      set at factory calibration.  0 is max power.  Monotonically
  *      nondecreasing with lower power levels.
  *
- * IEEE80211_RADIOTAP_DBM_TX_POWER      int8_t          decibels from
- *                                                      one milliwatt (dBm)
+ * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
+ *                                                   one milliwatt (dBm)
  *
  *      Transmit power expressed as dBm (decibels from a 1 milliwatt
  *      reference). This is the absolute power level measured at
  *      the antenna port.
  *
- * IEEE80211_RADIOTAP_FLAGS             u8        bitmap
+ * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
  *
  *      Properties of transmitted and received frames. See flags
  *      defined below.
  *
- * IEEE80211_RADIOTAP_ANTENNA           u8        antenna index
+ * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
  *
  *      Unitless indication of the Rx/Tx antenna for this packet.
  *      The first antenna is antenna 0.
  *
- * IEEE80211_RADIOTAP_FCS           	u32       data
+ * IEEE80211_RADIOTAP_RX_FLAGS          __le16       bitmap
+ *
+ *     Properties of received frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_TX_FLAGS          __le16       bitmap
+ *
+ *     Properties of transmitted frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
+ *
+ *     Number of rts retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
+ *
+ *     Number of unicast retries a transmitted frame used.
  *
- *	FCS from frame in network byte order.
  */
 enum ieee80211_radiotap_type {
 	IEEE80211_RADIOTAP_TSFT = 0,
@@ -187,7 +202,11 @@ enum ieee80211_radiotap_type {
 	IEEE80211_RADIOTAP_ANTENNA = 11,
 	IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
 	IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
-	IEEE80211_RADIOTAP_EXT = 31,
+	IEEE80211_RADIOTAP_RX_FLAGS = 14,
+	IEEE80211_RADIOTAP_TX_FLAGS = 15,
+	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
+	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
+	IEEE80211_RADIOTAP_EXT = 31
 };
 
 /* Channel flags. */
@@ -219,6 +238,14 @@ enum ieee80211_radiotap_type {
 						 * 802.11 header and payload
 						 * (to 32-bit boundary)
 						 */
+/* For IEEE80211_RADIOTAP_RX_FLAGS */
+#define IEEE80211_RADIOTAP_F_RX_BADFCS	0x0001	/* frame failed crc check */
+
+/* For IEEE80211_RADIOTAP_TX_FLAGS */
+#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
+						 * retries */
+#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
+#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */
 
 /* Ugly macro to convert literal channel numbers into their mhz equivalents
  * There are certianly some conditions that will break this (like feeding it '30')