diff options
author | Ingo Molnar <mingo@elte.hu> | 2008-10-12 12:49:27 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2008-10-12 12:49:27 +0200 |
commit | 1389ac4b976abdc0555280dfc1aa2c3abcc19641 (patch) | |
tree | 1ec51aa0b1e33201f6f4f3bebc657f9ec65f8539 /net/dsa/mv88e6123_61_65.c | |
parent | 69e13ad56f9e2cd81c4f8bfd6267211c10c14c08 (diff) | |
parent | fd048088306656824958e7783ffcee27e241b361 (diff) |
Merge branch 'linus' into x86/signal
Conflicts:
arch/x86/kernel/signal_64.c
Diffstat (limited to 'net/dsa/mv88e6123_61_65.c')
-rw-r--r-- | net/dsa/mv88e6123_61_65.c | 421 |
1 files changed, 421 insertions, 0 deletions
diff --git a/net/dsa/mv88e6123_61_65.c b/net/dsa/mv88e6123_61_65.c new file mode 100644 index 00000000000..555b164082f --- /dev/null +++ b/net/dsa/mv88e6123_61_65.c @@ -0,0 +1,421 @@ +/* + * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include "dsa_priv.h" +#include "mv88e6xxx.h" + +static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr) +{ + int ret; + + ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03); + if (ret >= 0) { + ret &= 0xfff0; + if (ret == 0x1210) + return "Marvell 88E6123"; + if (ret == 0x1610) + return "Marvell 88E6161"; + if (ret == 0x1650) + return "Marvell 88E6165"; + } + + return NULL; +} + +static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds) +{ + int i; + int ret; + + /* + * Set all ports to the disabled state. + */ + for (i = 0; i < 8; i++) { + ret = REG_READ(REG_PORT(i), 0x04); + REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); + } + + /* + * Wait for transmit queues to drain. + */ + msleep(2); + + /* + * Reset the switch. + */ + REG_WRITE(REG_GLOBAL, 0x04, 0xc400); + + /* + * Wait up to one second for reset to complete. + */ + for (i = 0; i < 1000; i++) { + ret = REG_READ(REG_GLOBAL, 0x00); + if ((ret & 0xc800) == 0xc800) + break; + + msleep(1); + } + if (i == 1000) + return -ETIMEDOUT; + + return 0; +} + +static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) +{ + int ret; + int i; + + /* + * Disable the PHY polling unit (since there won't be any + * external PHYs to poll), don't discard packets with + * excessive collisions, and mask all interrupt sources. + */ + REG_WRITE(REG_GLOBAL, 0x04, 0x0000); + + /* + * Set the default address aging time to 5 minutes, and + * enable address learn messages to be sent to all message + * ports. + */ + REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); + + /* + * Configure the priority mapping registers. + */ + ret = mv88e6xxx_config_prio(ds); + if (ret < 0) + return ret; + + /* + * Configure the cpu port, and configure the cpu port as the + * port to which ingress and egress monitor frames are to be + * sent. + */ + REG_WRITE(REG_GLOBAL, 0x1a, (ds->cpu_port * 0x1110)); + + /* + * Disable remote management for now, and set the switch's + * DSA device number to zero. + */ + REG_WRITE(REG_GLOBAL, 0x1c, 0x0000); + + /* + * Send all frames with destination addresses matching + * 01:80:c2:00:00:2x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x02, 0xffff); + + /* + * Send all frames with destination addresses matching + * 01:80:c2:00:00:0x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); + + /* + * Disable the loopback filter, disable flow control + * messages, disable flood broadcast override, disable + * removing of provider tags, disable ATU age violation + * interrupts, disable tag flow control, force flow + * control priority to the highest, and send all special + * multicast frames to the CPU at the highest priority. + */ + REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); + + /* + * Map all DSA device IDs to the CPU port. + */ + for (i = 0; i < 32; i++) + REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | ds->cpu_port); + + /* + * Clear all trunk masks. + */ + for (i = 0; i < 8; i++) + REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff); + + /* + * Clear all trunk mappings. + */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); + + /* + * Disable ingress rate limiting by resetting all ingress + * rate limit registers to their initial state. + */ + for (i = 0; i < 6; i++) + REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8)); + + /* + * Initialise cross-chip port VLAN table to reset defaults. + */ + REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000); + + /* + * Clear the priority override table. + */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8)); + + /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */ + + return 0; +} + +static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) +{ + int addr = REG_PORT(p); + + /* + * MAC Forcing register: don't force link, speed, duplex + * or flow control state to any particular values. + */ + REG_WRITE(addr, 0x01, 0x0003); + + /* + * Do not limit the period of time that this port can be + * paused for by the remote end or the period of time that + * this port can pause the remote end. + */ + REG_WRITE(addr, 0x02, 0x0000); + + /* + * Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, + * configure the requested (DSA/EDSA) tagging mode if this is + * the CPU port, disable Header mode, enable IGMP/MLD snooping, + * disable VLAN tunneling, determine priority by looking at + * 802.1p and IP priority fields (IP prio has precedence), and + * set STP state to Forwarding. Finally, if this is the CPU + * port, additionally enable forwarding of unknown unicast and + * multicast addresses. + */ + REG_WRITE(addr, 0x04, + (p == ds->cpu_port) ? + (ds->tag_protocol == htons(ETH_P_DSA)) ? + 0x053f : 0x373f : + 0x0433); + + /* + * Port Control 1: disable trunking. Also, if this is the + * CPU port, enable learn messages to be sent to this port. + */ + REG_WRITE(addr, 0x05, (p == ds->cpu_port) ? 0x8000 : 0x0000); + + /* + * Port based VLAN map: give each port its own address + * database, allow the CPU port to talk to each of the 'real' + * ports, and allow each of the 'real' ports to only talk to + * the CPU port. + */ + REG_WRITE(addr, 0x06, + ((p & 0xf) << 12) | + ((p == ds->cpu_port) ? + ds->valid_port_mask : + (1 << ds->cpu_port))); + + /* + * Default VLAN ID and priority: don't set a default VLAN + * ID, and set the default packet priority to zero. + */ + REG_WRITE(addr, 0x07, 0x0000); + + /* + * Port Control 2: don't force a good FCS, set the maximum + * frame size to 10240 bytes, don't let the switch add or + * strip 802.1q tags, don't discard tagged or untagged frames + * on this port, do a destination address lookup on all + * received packets as usual, disable ARP mirroring and don't + * send a copy of all transmitted/received frames on this port + * to the CPU. + */ + REG_WRITE(addr, 0x08, 0x2080); + + /* + * Egress rate control: disable egress rate control. + */ + REG_WRITE(addr, 0x09, 0x0001); + + /* + * Egress rate control 2: disable egress rate control. + */ + REG_WRITE(addr, 0x0a, 0x0000); + + /* + * Port Association Vector: when learning source addresses + * of packets, add the address to the address database using + * a port bitmap that has only the bit for this port set and + * the other bits clear. + */ + REG_WRITE(addr, 0x0b, 1 << p); + + /* + * Port ATU control: disable limiting the number of address + * database entries that this port is allowed to use. + */ + REG_WRITE(addr, 0x0c, 0x0000); + + /* + * Priorit Override: disable DA, SA and VTU priority override. + */ + REG_WRITE(addr, 0x0d, 0x0000); + + /* + * Port Ethertype: use the Ethertype DSA Ethertype value. + */ + REG_WRITE(addr, 0x0f, ETH_P_EDSA); + + /* + * Tag Remap: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x18, 0x3210); + + /* + * Tag Remap 2: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x19, 0x7654); + + return 0; +} + +static int mv88e6123_61_65_setup(struct dsa_switch *ds) +{ + struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); + int i; + int ret; + + mutex_init(&ps->smi_mutex); + mutex_init(&ps->stats_mutex); + + ret = mv88e6123_61_65_switch_reset(ds); + if (ret < 0) + return ret; + + /* @@@ initialise vtu and atu */ + + ret = mv88e6123_61_65_setup_global(ds); + if (ret < 0) + return ret; + + for (i = 0; i < 6; i++) { + ret = mv88e6123_61_65_setup_port(ds, i); + if (ret < 0) + return ret; + } + + return 0; +} + +static int mv88e6123_61_65_port_to_phy_addr(int port) +{ + if (port >= 0 && port <= 4) + return port; + return -1; +} + +static int +mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum) +{ + int addr = mv88e6123_61_65_port_to_phy_addr(port); + return mv88e6xxx_phy_read(ds, addr, regnum); +} + +static int +mv88e6123_61_65_phy_write(struct dsa_switch *ds, + int port, int regnum, u16 val) +{ + int addr = mv88e6123_61_65_port_to_phy_addr(port); + return mv88e6xxx_phy_write(ds, addr, regnum, val); +} + +static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = { + { "in_good_octets", 8, 0x00, }, + { "in_bad_octets", 4, 0x02, }, + { "in_unicast", 4, 0x04, }, + { "in_broadcasts", 4, 0x06, }, + { "in_multicasts", 4, 0x07, }, + { "in_pause", 4, 0x16, }, + { "in_undersize", 4, 0x18, }, + { "in_fragments", 4, 0x19, }, + { "in_oversize", 4, 0x1a, }, + { "in_jabber", 4, 0x1b, }, + { "in_rx_error", 4, 0x1c, }, + { "in_fcs_error", 4, 0x1d, }, + { "out_octets", 8, 0x0e, }, + { "out_unicast", 4, 0x10, }, + { "out_broadcasts", 4, 0x13, }, + { "out_multicasts", 4, 0x12, }, + { "out_pause", 4, 0x15, }, + { "excessive", 4, 0x11, }, + { "collisions", 4, 0x1e, }, + { "deferred", 4, 0x05, }, + { "single", 4, 0x14, }, + { "multiple", 4, 0x17, }, + { "out_fcs_error", 4, 0x03, }, + { "late", 4, 0x1f, }, + { "hist_64bytes", 4, 0x08, }, + { "hist_65_127bytes", 4, 0x09, }, + { "hist_128_255bytes", 4, 0x0a, }, + { "hist_256_511bytes", 4, 0x0b, }, + { "hist_512_1023bytes", 4, 0x0c, }, + { "hist_1024_max_bytes", 4, 0x0d, }, +}; + +static void +mv88e6123_61_65_get_strings(struct dsa_switch *ds, int port, uint8_t *data) +{ + mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats), + mv88e6123_61_65_hw_stats, port, data); +} + +static void +mv88e6123_61_65_get_ethtool_stats(struct dsa_switch *ds, + int port, uint64_t *data) +{ + mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats), + mv88e6123_61_65_hw_stats, port, data); +} + +static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds) +{ + return ARRAY_SIZE(mv88e6123_61_65_hw_stats); +} + +static struct dsa_switch_driver mv88e6123_61_65_switch_driver = { + .tag_protocol = __constant_htons(ETH_P_EDSA), + .priv_size = sizeof(struct mv88e6xxx_priv_state), + .probe = mv88e6123_61_65_probe, + .setup = mv88e6123_61_65_setup, + .set_addr = mv88e6xxx_set_addr_indirect, + .phy_read = mv88e6123_61_65_phy_read, + .phy_write = mv88e6123_61_65_phy_write, + .poll_link = mv88e6xxx_poll_link, + .get_strings = mv88e6123_61_65_get_strings, + .get_ethtool_stats = mv88e6123_61_65_get_ethtool_stats, + .get_sset_count = mv88e6123_61_65_get_sset_count, +}; + +int __init mv88e6123_61_65_init(void) +{ + register_switch_driver(&mv88e6123_61_65_switch_driver); + return 0; +} +module_init(mv88e6123_61_65_init); + +void __exit mv88e6123_61_65_cleanup(void) +{ + unregister_switch_driver(&mv88e6123_61_65_switch_driver); +} +module_exit(mv88e6123_61_65_cleanup); |