[PATCH] The scheduled removal of some OSS drivers

This patch contains the scheduled removal of OSS drivers that:
- have ALSA drivers for the same hardware without known regressions and
- whose Kconfig options have been removed in 2.6.17.

[michal.k.k.piotrowski@gmail.com: build fix]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 1113 deletions

diff --git a/sound/oss/mad16.c b/sound/oss/mad16.c
deleted file mode 100644
index aa3c50db66c..00000000000
--- a/sound/oss/mad16.c
+++ /dev/null
@@ -1,1113 +0,0 @@
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * mad16.c
- *
- * Initialization code for OPTi MAD16 compatible audio chips. Including
- *
- *      OPTi 82C928     MAD16           (replaced by C929)
- *      OAK OTI-601D    Mozart
- *      OAK OTI-605	Mozart		(later version with MPU401 Midi)
- *      OPTi 82C929     MAD16 Pro
- *      OPTi 82C930
- *      OPTi 82C924
- *
- * These audio interface chips don't produce sound themselves. They just
- * connect some other components (OPL-[234] and a WSS compatible codec)
- * to the PC bus and perform I/O, DMA and IRQ address decoding. There is
- * also a UART for the MPU-401 mode (not 82C928/Mozart).
- * The Mozart chip appears to be compatible with the 82C928, although later
- * issues of the card, using the OTI-605 chip, have an MPU-401 compatible Midi
- * port. This port is configured differently to that of the OPTi audio chips.
- *
- *	Changes
- *	
- *	Alan Cox		Clean up, added module selections.
- *
- *	A. Wik			Added support for Opti924 PnP.
- *				Improved debugging support.	16-May-1998
- *				Fixed bug.			16-Jun-1998
- *
- *      Torsten Duwe            Made Opti924 PnP support non-destructive
- *                                                             	23-Dec-1998
- *
- *	Paul Grayson		Added support for Midi on later Mozart cards.
- *								25-Nov-1999
- *	Christoph Hellwig	Adapted to module_init/module_exit.
- *	Arnaldo C. de Melo	got rid of attach_uart401       21-Sep-2000
- *
- *	Pavel Rabel		Clean up                           Nov-2000
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gameport.h>
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-#include "ad1848.h"
-#include "sb.h"
-#include "mpu401.h"
-
-#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
-#define SUPPORT_JOYSTICK 1
-#endif
-
-static int      mad16_conf;
-static int      mad16_cdsel;
-static DEFINE_SPINLOCK(lock);
-
-#define C928	1
-#define MOZART	2
-#define C929	3
-#define C930	4
-#define C924    5
-
-/*
- *    Registers
- *
- *      The MAD16 occupies I/O ports 0xf8d to 0xf93 (fixed locations).
- *      All ports are inactive by default. They can be activated by
- *      writing 0xE2 or 0xE3 to the password register. The password is valid
- *      only until the next I/O read or write.
- *
- *      82C930 uses 0xE4 as the password and indirect addressing to access
- *      the config registers.
- */
-
-#define MC0_PORT	0xf8c	/* Dummy port */
-#define MC1_PORT	0xf8d	/* SB address, CD-ROM interface type, joystick */
-#define MC2_PORT	0xf8e	/* CD-ROM address, IRQ, DMA, plus OPL4 bit */
-#define MC3_PORT	0xf8f
-#define PASSWD_REG	0xf8f
-#define MC4_PORT	0xf90
-#define MC5_PORT	0xf91
-#define MC6_PORT	0xf92
-#define MC7_PORT	0xf93
-#define MC8_PORT	0xf94
-#define MC9_PORT	0xf95
-#define MC10_PORT	0xf96
-#define MC11_PORT	0xf97
-#define MC12_PORT	0xf98
-
-static int      board_type = C928;
-
-static int     *mad16_osp;
-static int	c931_detected;	/* minor differences from C930 */
-static char	c924pnp;	/* "     "           "    C924 */
-static int	debug;  	/* debugging output */
-
-#ifdef DDB
-#undef DDB
-#endif
-#define DDB(x) do {if (debug) x;} while (0)
-
-static unsigned char mad_read(int port)
-{
-	unsigned long flags;
-	unsigned char tmp;
-
-	spin_lock_irqsave(&lock,flags);
-
-	switch (board_type)	/* Output password */
-	{
-		case C928:
-		case MOZART:
-			outb((0xE2), PASSWD_REG);
-			break;
-
-		case C929:
-			outb((0xE3), PASSWD_REG);
-			break;
-
-		case C930:
-			/* outb(( 0xE4),  PASSWD_REG); */
-			break;
-
-		case C924:
-			/* the c924 has its ports relocated by -128 if
-			   PnP is enabled  -aw */
-			if (!c924pnp)
-				outb((0xE5), PASSWD_REG); else
-				outb((0xE5), PASSWD_REG - 0x80);
-			break;
-	}
-
-	if (board_type == C930)
-	{
-		outb((port - MC0_PORT), 0xe0e);	/* Write to index reg */
-		tmp = inb(0xe0f);	/* Read from data reg */
-	}
-	else
-		if (!c924pnp)
-			tmp = inb(port); else
-			tmp = inb(port-0x80);
-	spin_unlock_irqrestore(&lock,flags);
-
-	return tmp;
-}
-
-static void mad_write(int port, int value)
-{
-	unsigned long   flags;
-
-	spin_lock_irqsave(&lock,flags);
-
-	switch (board_type)	/* Output password */
-	{
-		case C928:
-		case MOZART:
-			outb((0xE2), PASSWD_REG);
-			break;
-
-		case C929:
-			outb((0xE3), PASSWD_REG);
-			break;
-
-		case C930:
-			/* outb(( 0xE4),  PASSWD_REG); */
-			break;
-
-		case C924:
-			if (!c924pnp)
-				outb((0xE5), PASSWD_REG); else
-				outb((0xE5), PASSWD_REG - 0x80);
-			break;
-	}
-
-	if (board_type == C930)
-	{
-		outb((port - MC0_PORT), 0xe0e);	/* Write to index reg */
-		outb(((unsigned char) (value & 0xff)), 0xe0f);
-	}
-	else
-		if (!c924pnp)
-			outb(((unsigned char) (value & 0xff)), port); else
-			outb(((unsigned char) (value & 0xff)), port-0x80);
-	spin_unlock_irqrestore(&lock,flags);
-}
-
-static int __init detect_c930(void)
-{
-	unsigned char   tmp = mad_read(MC1_PORT);
-
-	if ((tmp & 0x06) != 0x06)
-	{
-		DDB(printk("Wrong C930 signature (%x)\n", tmp));
-		/* return 0; */
-	}
-	mad_write(MC1_PORT, 0);
-
-	if (mad_read(MC1_PORT) != 0x06)
-	{
-		DDB(printk("Wrong C930 signature2 (%x)\n", tmp));
-		/* return 0; */
-	}
-	mad_write(MC1_PORT, tmp);	/* Restore bits */
-
-	mad_write(MC7_PORT, 0);
-	if ((tmp = mad_read(MC7_PORT)) != 0)
-	{
-		DDB(printk("MC7 not writable (%x)\n", tmp));
-		return 0;
-	}
-	mad_write(MC7_PORT, 0xcb);
-	if ((tmp = mad_read(MC7_PORT)) != 0xcb)
-	{
-		DDB(printk("MC7 not writable2 (%x)\n", tmp));
-		return 0;
-	}
-
-	tmp = mad_read(MC0_PORT+18);
-	if (tmp == 0xff || tmp == 0x00)
-		return 1;
-	/* We probably have a C931 */
-	DDB(printk("Detected C931 config=0x%02x\n", tmp));
-	c931_detected = 1;
-
-	/*
-         * We cannot configure the chip if it is in PnP mode.
-         * If we have a CSN assigned (bit 8 in MC13) we first try
-         * a software reset, then a software power off, finally
-         * Clearing PnP mode. The last option is not
-	 * Bit 8 in MC13 
-         */
-	if ((mad_read(MC0_PORT+13) & 0x80) == 0)
-		return 1;
-
-	/* Software reset */
-	mad_write(MC9_PORT, 0x02);
-	mad_write(MC9_PORT, 0x00);
-
-	if ((mad_read(MC0_PORT+13) & 0x80) == 0)
-		return 1;
-	
-	/* Power off, and on again */
-	mad_write(MC9_PORT, 0xc2);
-	mad_write(MC9_PORT, 0xc0);
-
-	if ((mad_read(MC0_PORT+13) & 0x80) == 0)
-		return 1;
-	
-#if 0	
-	/* Force off PnP mode. This is not recommended because
-	 * the PnP bios will not recognize the chip on the next
-	 * warm boot and may assignd different resources to other
-	 * PnP/PCI cards.
-	 */
-	mad_write(MC0_PORT+17, 0x04);
-#endif
-	return 1;
-}
-
-static int __init detect_mad16(void)
-{
-	unsigned char tmp, tmp2, bit;
-	int i, port;
-
-	/*
-	 * Check that reading a register doesn't return bus float (0xff)
-	 * when the card is accessed using password. This may fail in case
-	 * the card is in low power mode. Normally at least the power saving
-	 * mode bit should be 0.
-	 */
-
-	if ((tmp = mad_read(MC1_PORT)) == 0xff)
-	{
-		DDB(printk("MC1_PORT returned 0xff\n"));
-		return 0;
-	}
-	for (i = 0xf8d; i <= 0xf98; i++)
-		if (!c924pnp)
-			DDB(printk("Port %0x (init value) = %0x\n", i, mad_read(i)));
-		else
-			DDB(printk("Port %0x (init value) = %0x\n", i-0x80, mad_read(i)));
-
-	if (board_type == C930)
-		return detect_c930();
-
-	/*
-	 * Now check that the gate is closed on first I/O after writing
-	 * the password. (This is how a MAD16 compatible card works).
-	 */
-
-	if ((tmp2 = inb(MC1_PORT)) == tmp)	/* It didn't close */
-	{
-		DDB(printk("MC1_PORT didn't close after read (0x%02x)\n", tmp2));
-		return 0;
-	}
-
-	bit  = (c924pnp) ?     0x20 : 0x80;
-	port = (c924pnp) ? MC2_PORT : MC1_PORT;
-
-	tmp = mad_read(port);
-	mad_write(port, tmp ^ bit);	/* Toggle a bit */
-	if ((tmp2 = mad_read(port)) != (tmp ^ bit))	/* Compare the bit */
-	{
-		mad_write(port, tmp);	/* Restore */
-		DDB(printk("Bit revert test failed (0x%02x, 0x%02x)\n", tmp, tmp2));
-		return 0;
-	}
-	mad_write(port, tmp);	/* Restore */
-	return 1;		/* Bingo */
-}
-
-static int __init wss_init(struct address_info *hw_config)
-{
-	/*
-	 * Check if the IO port returns valid signature. The original MS Sound
-	 * system returns 0x04 while some cards (AudioTrix Pro for example)
-	 * return 0x00.
-	 */
-
-	if ((inb(hw_config->io_base + 3) & 0x3f) != 0x04 &&
-	    (inb(hw_config->io_base + 3) & 0x3f) != 0x00)
-	{
-		DDB(printk("No MSS signature detected on port 0x%x (0x%x)\n", hw_config->io_base, inb(hw_config->io_base + 3)));
-		return 0;
-	}
-	/*
-	 * Check that DMA0 is not in use with a 8 bit board.
-	 */
-	if (hw_config->dma == 0 && inb(hw_config->io_base + 3) & 0x80)
-	{
-		printk("MSS: Can't use DMA0 with a 8 bit card/slot\n");
-		return 0;
-	}
-	if (hw_config->irq > 9 && inb(hw_config->io_base + 3) & 0x80)
-		printk(KERN_ERR "MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq);
-	return 1;
-}
-
-static void __init init_c930(struct address_info *hw_config, int base)
-{
-	unsigned char cfg = 0;
-
-	cfg |= (0x0f & mad16_conf);
-
-	if(c931_detected)
-	{
-		/* Bit 0 has reversd meaning. Bits 1 and 2 sese
-		   reversed on write.
-		   Support only IDE cdrom. IDE port programmed
-		   somewhere else. */
-		cfg =  (cfg & 0x09) ^ 0x07;
-	}
-	cfg |= base << 4;
-	mad_write(MC1_PORT, cfg);
-
-	/* MC2 is CD configuration. Don't touch it. */
-
-	mad_write(MC3_PORT, 0);	/* Disable SB mode IRQ and DMA */
-
-	/* bit 2 of MC4 reverses it's meaning between the C930
-	   and the C931. */
-	cfg = c931_detected ? 0x04 : 0x00;
-
-	if(mad16_cdsel & 0x20)
-		mad_write(MC4_PORT, 0x62|cfg);  /* opl4 */
-	else
-		mad_write(MC4_PORT, 0x52|cfg);  /* opl3 */
-
-	mad_write(MC5_PORT, 0x3C);	/* Init it into mode2 */
-	mad_write(MC6_PORT, 0x02);	/* Enable WSS, Disable MPU and SB */
-	mad_write(MC7_PORT, 0xCB);
-	mad_write(MC10_PORT, 0x11);
-}
-
-static int __init chip_detect(void)
-{
-	int i;
-
-	/*
-	 *    Then try to detect with the old password
-	 */
-	board_type = C924;
-
-	DDB(printk("Detect using password = 0xE5\n"));
-	
-	if (detect_mad16()) {
-		return 1;
-	}
-	
-	board_type = C928;
-
-	DDB(printk("Detect using password = 0xE2\n"));
-
-	if (detect_mad16())
-	{
-		unsigned char model;
-
-		if (((model = mad_read(MC3_PORT)) & 0x03) == 0x03) {
-			DDB(printk("mad16.c: Mozart detected\n"));
-			board_type = MOZART;
-		} else {
-			DDB(printk("mad16.c: 82C928 detected???\n"));
-			board_type = C928;
-		}
-		return 1;
-	}
-
-	board_type = C929;
-
-	DDB(printk("Detect using password = 0xE3\n"));
-
-	if (detect_mad16())
-	{
-		DDB(printk("mad16.c: 82C929 detected\n"));
-		return 1;
-	}
-
-	if (inb(PASSWD_REG) != 0xff)
-		return 0;
-
-	/*
-	 * First relocate MC# registers to 0xe0e/0xe0f, disable password 
-	 */
-
-	outb((0xE4), PASSWD_REG);
-	outb((0x80), PASSWD_REG);
-
-	board_type = C930;
-
-	DDB(printk("Detect using password = 0xE4\n"));
-
-	for (i = 0xf8d; i <= 0xf93; i++)
-		DDB(printk("port %03x = %02x\n", i, mad_read(i)));
-
-        if(detect_mad16()) {
-		DDB(printk("mad16.c: 82C930 detected\n"));
-		return 1;
-	}
-
-	/* The C931 has the password reg at F8D */
-	outb((0xE4), 0xF8D);
-	outb((0x80), 0xF8D);
-	DDB(printk("Detect using password = 0xE4 for C931\n"));
-
-	if (detect_mad16()) {
-		return 1;
-	}
-
-	board_type = C924;
-	c924pnp++;
-	DDB(printk("Detect using password = 0xE5 (again), port offset -0x80\n"));
-	if (detect_mad16()) {
-		DDB(printk("mad16.c: 82C924 PnP detected\n"));
-		return 1;
-	}
-	
-	c924pnp=0;
-
-	return 0;
-}
-
-static int __init probe_mad16(struct address_info *hw_config)
-{
-	int i;
-	unsigned char tmp;
-	unsigned char cs4231_mode = 0;
-
-	int ad_flags = 0;
-
-	signed char bits;
-
-	static char     dma_bits[4] = {
-		1, 2, 0, 3
-	};
-
-	int config_port = hw_config->io_base + 0, version_port = hw_config->io_base + 3;
-	int dma = hw_config->dma, dma2 = hw_config->dma2;
-	unsigned char dma2_bit = 0;
-	int base;
-	struct resource *ports;
-
-	mad16_osp = hw_config->osp;
-
-	switch (hw_config->io_base) {
-	case 0x530:
-		base = 0;
-		break;
-	case 0xe80:
-		base = 1;
-		break;
-	case 0xf40:
-		base = 2;
-		break;
-	case 0x604:
-		base = 3;
-		break;
-	default:
-		printk(KERN_ERR "MAD16/Mozart: Bad WSS base address 0x%x\n", hw_config->io_base);
-		return 0;
-	}
-
-	if (dma != 0 && dma != 1 && dma != 3) {
-		printk(KERN_ERR "MSS: Bad DMA %d\n", dma);
-		return 0;
-	}
-
-	/*
-	 *    Check that all ports return 0xff (bus float) when no password
-	 *      is written to the password register.
-	 */
-
-	DDB(printk("--- Detecting MAD16 / Mozart ---\n"));
-	if (!chip_detect())
-		return 0;
-
-	switch (hw_config->irq) {
-	case 7:
-		bits = 8;
-		break;
-	case 9:
-		bits = 0x10;
-		break;
-	case 10:
-		bits = 0x18;
-		break;
-	case 12:
-		bits = 0x20;
-		break;
-	case 5:	/* Also IRQ5 is possible on C930 */
-		if (board_type == C930 || c924pnp) {
-			bits = 0x28;
-			break;
-		}
-	default:
-		printk(KERN_ERR "MAD16/Mozart: Bad IRQ %d\n", hw_config->irq);
-		return 0;
-	}
-
-	ports = request_region(hw_config->io_base + 4, 4, "ad1848");
-	if (!ports) {
-		printk(KERN_ERR "MSS: I/O port conflict\n");
-		return 0;
-	}
-	if (!request_region(hw_config->io_base, 4, "mad16 WSS config")) {
-		release_region(hw_config->io_base + 4, 4);
-		printk(KERN_ERR "MSS: I/O port conflict\n");
-		return 0;
-	}
-
-	if (board_type == C930) {
-		init_c930(hw_config, base);
-		goto got_it;
-	}
-
-	for (i = 0xf8d; i <= 0xf93; i++) {
-		if (!c924pnp)
-			DDB(printk("port %03x = %02x\n", i, mad_read(i)));
-		else
-			DDB(printk("port %03x = %02x\n", i-0x80, mad_read(i)));
-	}
-
-/*
- * Set the WSS address
- */
-
-	tmp = (mad_read(MC1_PORT) & 0x0f) | 0x80;	/* Enable WSS, Disable SB */
-	tmp |= base << 4;	/* WSS port select bits */
-
-	/*
-	 * Set optional CD-ROM and joystick settings.
-	 */
-
-	tmp &= ~0x0f;
-	tmp |= (mad16_conf & 0x0f);	/* CD-ROM and joystick bits */
-	mad_write(MC1_PORT, tmp);
-
-	tmp = mad16_cdsel;
-	mad_write(MC2_PORT, tmp);
-	mad_write(MC3_PORT, 0xf0);	/* Disable SB */
-
-	if (board_type == C924)	/* Specific C924 init values */
-	{
-		mad_write(MC4_PORT, 0xA0);
-		mad_write(MC5_PORT, 0x05);
-		mad_write(MC6_PORT, 0x03);
-	}
-	if (!ad1848_detect(ports, &ad_flags, mad16_osp))
-		goto fail;
-
-	if (ad_flags & (AD_F_CS4231 | AD_F_CS4248))
-		cs4231_mode = 0x02;	/* CS4248/CS4231 sync delay switch */
-
-	if (board_type == C929)
-	{
-		mad_write(MC4_PORT, 0xa2);
-		mad_write(MC5_PORT, 0xA5 | cs4231_mode);
-		mad_write(MC6_PORT, 0x03);	/* Disable MPU401 */
-	}
-	else
-	{
-		mad_write(MC4_PORT, 0x02);
-		mad_write(MC5_PORT, 0x30 | cs4231_mode);
-	}
-
-	for (i = 0xf8d; i <= 0xf93; i++) {
-		if (!c924pnp)
-			DDB(printk("port %03x after init = %02x\n", i, mad_read(i)));
-		else
-			DDB(printk("port %03x after init = %02x\n", i-0x80, mad_read(i)));
-	}
-
-got_it:
-	ad_flags = 0;
-	if (!ad1848_detect(ports, &ad_flags, mad16_osp))
-		goto fail;
-
-	if (!wss_init(hw_config))
-		goto fail;
-
-	/*
-	 * Set the IRQ and DMA addresses.
-	 */
-	
-	outb((bits | 0x40), config_port);
-	if ((inb(version_port) & 0x40) == 0)
-		printk(KERN_ERR "[IRQ Conflict?]\n");
-
-	/*
-	 * Handle the capture DMA channel
-	 */
-
-	if (ad_flags & AD_F_CS4231 && dma2 != -1 && dma2 != dma)
-	{
-		if (!((dma == 0 && dma2 == 1) ||
-			(dma == 1 && dma2 == 0) ||
-			(dma == 3 && dma2 == 0)))
-		{		/* Unsupported combination. Try to swap channels */
-			int tmp = dma;
-
-			dma = dma2;
-			dma2 = tmp;
-		}
-		if ((dma == 0 && dma2 == 1) || (dma == 1 && dma2 == 0) ||
-			(dma == 3 && dma2 == 0))
-		{
-			dma2_bit = 0x04;	/* Enable capture DMA */
-		}
-		else
-		{
-			printk("MAD16: Invalid capture DMA\n");
-			dma2 = dma;
-		}
-	}
-	else dma2 = dma;
-
-	outb((bits | dma_bits[dma] | dma2_bit), config_port);	/* Write IRQ+DMA setup */
-
-	hw_config->slots[0] = ad1848_init("mad16 WSS", ports,
-					  hw_config->irq,
-					  dma,
-					  dma2, 0,
-					  hw_config->osp,
-					  THIS_MODULE);
-	return 1;
-
-fail:
-	release_region(hw_config->io_base + 4, 4);
-	release_region(hw_config->io_base, 4);
-	return 0;
-}
-
-static int __init probe_mad16_mpu(struct address_info *hw_config)
-{
-	unsigned char tmp;
-
-	if (board_type < C929)	/* Early chip. No MPU support. Just SB MIDI */
-	{
-
-#ifdef CONFIG_MAD16_OLDCARD
-
-		tmp = mad_read(MC3_PORT);
-
-		/* 
-		 * MAD16 SB base is defined by the WSS base. It cannot be changed 
-		 * alone.
-		 * Ignore configured I/O base. Use the active setting. 
-		 */
-
-		if (mad_read(MC1_PORT) & 0x20)
-			hw_config->io_base = 0x240;
-		else
-			hw_config->io_base = 0x220;
-
-		switch (hw_config->irq)
-		{
-			case 5:
-				tmp = (tmp & 0x3f) | 0x80;
-				break;
-			case 7:
-				tmp = (tmp & 0x3f);
-				break;
-			case 11:
-				tmp = (tmp & 0x3f) | 0x40;
-				break;
-			default:
-				printk(KERN_ERR "mad16/Mozart: Invalid MIDI IRQ\n");
-				return 0;
-		}
-
-		mad_write(MC3_PORT, tmp | 0x04);
-		hw_config->driver_use_1 = SB_MIDI_ONLY;
-		if (!request_region(hw_config->io_base, 16, "soundblaster"))
-			return 0;
-		if (!sb_dsp_detect(hw_config, 0, 0, NULL)) {
-			release_region(hw_config->io_base, 16);
-			return 0;
-		}
-
-		if (mad_read(MC1_PORT) & 0x20)
-			hw_config->io_base = 0x240;
-		else
-			hw_config->io_base = 0x220;
-
-		hw_config->name = "Mad16/Mozart";
-		sb_dsp_init(hw_config, THIS_MODULE);
-		return 1;
-#else
-		/* assuming all later Mozart cards are identified as
-		 * either 82C928 or Mozart. If so, following code attempts
-		 * to set MPU register. TODO - add probing
-		 */
-
-		tmp = mad_read(MC8_PORT);
-
-		switch (hw_config->irq)
-		{
-			case 5:
-				tmp |= 0x08;
-				break;
-			case 7:
-				tmp |= 0x10;
-				break;
-			case 9:
-				tmp |= 0x18;
-				break;
-			case 10:
-				tmp |= 0x20;
-				break;
-			case 11:
-				tmp |= 0x28;
-				break;
-			default:
-				printk(KERN_ERR "mad16/MOZART: invalid mpu_irq\n");
-				return 0;
-		}
-
-		switch (hw_config->io_base)
-		{
-			case 0x300:
-				tmp |= 0x01;
-				break;
-			case 0x310:
-				tmp |= 0x03;
-				break;
-			case 0x320:
-				tmp |= 0x05;
-				break;
-			case 0x330:
-				tmp |= 0x07;
-				break;
-			default:
-				printk(KERN_ERR "mad16/MOZART: invalid mpu_io\n");
-				return 0;
-		}
-
-		mad_write(MC8_PORT, tmp);	/* write MPU port parameters */
-		goto probe_401;
-#endif
-	}
-	tmp = mad_read(MC6_PORT) & 0x83;
-	tmp |= 0x80;		/* MPU-401 enable */
-
-	/* Set the MPU base bits */
-
-	switch (hw_config->io_base)
-	{
-		case 0x300:
-			tmp |= 0x60;
-			break;
-		case 0x310:
-			tmp |= 0x40;
-			break;
-		case 0x320:
-			tmp |= 0x20;
-			break;
-		case 0x330:
-			tmp |= 0x00;
-			break;
-		default:
-			printk(KERN_ERR "MAD16: Invalid MIDI port 0x%x\n", hw_config->io_base);
-			return 0;
-	}
-
-	/* Set the MPU IRQ bits */
-
-	switch (hw_config->irq)
-	{
-		case 5:
-			tmp |= 0x10;
-			break;
-		case 7:
-			tmp |= 0x18;
-			break;
-		case 9:
-			tmp |= 0x00;
-			break;
-		case 10:
-			tmp |= 0x08;
-			break;
-		default:
-			printk(KERN_ERR "MAD16: Invalid MIDI IRQ %d\n", hw_config->irq);
-			break;
-	}
-			
-	mad_write(MC6_PORT, tmp);	/* Write MPU401 config */
-
-#ifndef CONFIG_MAD16_OLDCARD
-probe_401:
-#endif
-	hw_config->driver_use_1 = SB_MIDI_ONLY;
-	hw_config->name = "Mad16/Mozart";
-	return probe_uart401(hw_config, THIS_MODULE);
-}
-
-static void __exit unload_mad16(struct address_info *hw_config)
-{
-	ad1848_unload(hw_config->io_base + 4,
-			hw_config->irq,
-			hw_config->dma,
-			hw_config->dma2, 0);
-	release_region(hw_config->io_base, 4);
-	sound_unload_audiodev(hw_config->slots[0]);
-}
-
-static void __exit unload_mad16_mpu(struct address_info *hw_config)
-{
-#ifdef CONFIG_MAD16_OLDCARD
-	if (board_type < C929)	/* Early chip. No MPU support. Just SB MIDI */
-	{
-		sb_dsp_unload(hw_config, 0);
-		return;
-	}
-#endif
-
-	unload_uart401(hw_config);
-}
-
-static struct address_info cfg;
-static struct address_info cfg_mpu;
-
-static int found_mpu;
-
-static int __initdata mpu_io = 0;
-static int __initdata mpu_irq = 0;
-static int __initdata io = -1;
-static int __initdata dma = -1;
-static int __initdata dma16 = -1; /* Set this for modules that need it */
-static int __initdata irq = -1;
-static int __initdata cdtype = 0;
-static int __initdata cdirq = 0;
-static int __initdata cdport = 0x340;
-static int __initdata cddma = -1;
-static int __initdata opl4 = 0;
-static int __initdata joystick = 0;
-
-module_param(mpu_io, int, 0);
-module_param(mpu_irq, int, 0);
-module_param(io, int, 0);
-module_param(dma, int, 0);
-module_param(dma16, int, 0);
-module_param(irq, int, 0);
-module_param(cdtype, int, 0);
-module_param(cdirq, int, 0);
-module_param(cdport, int, 0);
-module_param(cddma, int, 0);
-module_param(opl4, int, 0);
-module_param(joystick, bool, 0);
-module_param(debug, bool, 0644);
-
-static int __initdata dma_map[2][8] =
-{
-	{0x03, -1, -1, -1, -1, 0x00, 0x01, 0x02},
-	{0x03, -1, 0x01, 0x00, -1, -1, -1, -1}
-};
-
-static int __initdata irq_map[16] =
-{
-	0x00, -1, -1, 0x0A,
-	-1, 0x04, -1, 0x08,
-	-1, 0x10, 0x14, 0x18,
-	-1, -1, -1, -1
-};
-
-#ifdef SUPPORT_JOYSTICK
-
-static struct gameport *gameport;
-
-static int __devinit mad16_register_gameport(int io_port)
-{
-	if (!request_region(io_port, 1, "mad16 gameport")) {
-		printk(KERN_ERR "mad16: gameport address 0x%#x already in use\n", io_port);
-		return -EBUSY;
-	}
-
-	gameport = gameport_allocate_port();
-	if (!gameport) {
-		printk(KERN_ERR "mad16: can not allocate memory for gameport\n");
-		release_region(io_port, 1);
-		return -ENOMEM;
-	}
-
-	gameport_set_name(gameport, "MAD16 Gameport");
-	gameport_set_phys(gameport, "isa%04x/gameport0", io_port);
-	gameport->io = io_port;
-
-	gameport_register_port(gameport);
-
-	return 0;
-}
-
-static inline void mad16_unregister_gameport(void)
-{
-	if (gameport) {
-		/* the gameport was initialized so we must free it up */
-		gameport_unregister_port(gameport);
-		gameport = NULL;
-		release_region(0x201, 1);
-	}
-}
-#else
-static inline int mad16_register_gameport(int io_port) { return -ENOSYS; }
-static inline void mad16_unregister_gameport(void) { }
-#endif
-
-static int __devinit init_mad16(void)
-{
-	int dmatype = 0;
-
-	printk(KERN_INFO "MAD16 audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-
-	printk(KERN_INFO "CDROM ");
-	switch (cdtype)
-	{
-		case 0x00:
-			printk("Disabled");
-			cdirq = 0;
-			break;
-		case 0x02:
-			printk("Sony CDU31A");
-			dmatype = 1;
-			if(cddma == -1) cddma = 3;
-			break;
-		case 0x04:
-			printk("Mitsumi");
-			dmatype = 0;
-			if(cddma == -1) cddma = 5;
-			break;
-		case 0x06:
-			printk("Panasonic Lasermate");
-			dmatype = 1;
-			if(cddma == -1) cddma = 3;
-			break;
-		case 0x08:
-			printk("Secondary IDE");
-			dmatype = 0;
-			if(cddma == -1) cddma = 5;
-			break;
-		case 0x0A:
-			printk("Primary IDE");
-			dmatype = 0;
-			if(cddma == -1) cddma = 5;
-			break;
-		default:
-			printk("\n");
-			printk(KERN_ERR "Invalid CDROM type\n");
-			return -EINVAL;
-	}
-
-	/*
-	 *    Build the config words
-	 */
-
-	mad16_conf = (joystick ^ 1) | cdtype;
-	mad16_cdsel = 0;
-	if (opl4)
-		mad16_cdsel |= 0x20;
-
-	if(cdtype){
-		if (cddma > 7 || cddma < 0 || dma_map[dmatype][cddma] == -1)
-		{
-			printk("\n");
-			printk(KERN_ERR "Invalid CDROM DMA\n");
-			return -EINVAL;
-		}
-		if (cddma)
-			printk(", DMA %d", cddma);
-		else
-			printk(", no DMA");
-
-		if (!cdirq)
-			printk(", no IRQ");
-		else if (cdirq < 0 || cdirq > 15 || irq_map[cdirq] == -1)
-		{
-			printk(", invalid IRQ (disabling)");
-			cdirq = 0;
-		}
-		else printk(", IRQ %d", cdirq);
-
-		mad16_cdsel |= dma_map[dmatype][cddma];
-
-		if (cdtype < 0x08)
-		{
-			switch (cdport)
-			{
-				case 0x340:
-					mad16_cdsel |= 0x00;
-					break;
-				case 0x330:
-					mad16_cdsel |= 0x40;
-					break;
-				case 0x360:
-					mad16_cdsel |= 0x80;
-					break;
-				case 0x320:
-					mad16_cdsel |= 0xC0;
-					break;
-				default:
-					printk(KERN_ERR "Unknown CDROM I/O base %d\n", cdport);
-					return -EINVAL;
-			}
-		}
-		mad16_cdsel |= irq_map[cdirq];
-	}
-
-	printk(".\n");
-
-	cfg.io_base = io;
-	cfg.irq = irq;
-	cfg.dma = dma;
-	cfg.dma2 = dma16;
-
-	if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
-		printk(KERN_ERR "I/O, DMA and irq are mandatory\n");
-		return -EINVAL;
-	}
-
-	if (!request_region(MC0_PORT, 12, "mad16"))
-		return -EBUSY;
-
-	if (!probe_mad16(&cfg)) {
-		release_region(MC0_PORT, 12);
-		return -ENODEV;
-	}
-
-	cfg_mpu.io_base = mpu_io;
-	cfg_mpu.irq = mpu_irq;
-
-	found_mpu = probe_mad16_mpu(&cfg_mpu);
-
-	if (joystick)
-		mad16_register_gameport(0x201);
-
-	return 0;
-}
-
-static void __exit cleanup_mad16(void)
-{
-	if (found_mpu)
-		unload_mad16_mpu(&cfg_mpu);
-	mad16_unregister_gameport();
-	unload_mad16(&cfg);
-	release_region(MC0_PORT, 12);
-}
-
-module_init(init_mad16);
-module_exit(cleanup_mad16);
-
-#ifndef MODULE
-static int __init setup_mad16(char *str)
-{
-	/* io, irq */
-	int ints[8];
-
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	io	 = ints[1];
-	irq	 = ints[2];
-	dma	 = ints[3];
-	dma16	 = ints[4];
-	mpu_io	 = ints[5];
-	mpu_irq  = ints[6];
-	joystick = ints[7];
-
-	return 1;
-}
-
-__setup("mad16=", setup_mad16);
-#endif
-MODULE_LICENSE("GPL");