aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/asm-i386/paravirt.h131
1 files changed, 121 insertions, 10 deletions
diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h
index 837457b42db..8bfaf10d996 100644
--- a/include/asm-i386/paravirt.h
+++ b/include/asm-i386/paravirt.h
@@ -21,6 +21,14 @@ struct Xgt_desc_struct;
struct tss_struct;
struct mm_struct;
struct desc_struct;
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+ PARAVIRT_LAZY_NONE = 0,
+ PARAVIRT_LAZY_MMU = 1,
+ PARAVIRT_LAZY_CPU = 2,
+};
+
struct paravirt_ops
{
unsigned int kernel_rpl;
@@ -37,22 +45,33 @@ struct paravirt_ops
*/
unsigned (*patch)(u8 type, u16 clobber, void *firstinsn, unsigned len);
+ /* Basic arch-specific setup */
void (*arch_setup)(void);
char *(*memory_setup)(void);
void (*init_IRQ)(void);
+ void (*time_init)(void);
+ /*
+ * Called before/after init_mm pagetable setup. setup_start
+ * may reset %cr3, and may pre-install parts of the pagetable;
+ * pagetable setup is expected to preserve any existing
+ * mapping.
+ */
void (*pagetable_setup_start)(pgd_t *pgd_base);
void (*pagetable_setup_done)(pgd_t *pgd_base);
+ /* Print a banner to identify the environment */
void (*banner)(void);
+ /* Set and set time of day */
unsigned long (*get_wallclock)(void);
int (*set_wallclock)(unsigned long);
- void (*time_init)(void);
+ /* cpuid emulation, mostly so that caps bits can be disabled */
void (*cpuid)(unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx);
+ /* hooks for various privileged instructions */
unsigned long (*get_debugreg)(int regno);
void (*set_debugreg)(int regno, unsigned long value);
@@ -71,15 +90,23 @@ struct paravirt_ops
unsigned long (*read_cr4)(void);
void (*write_cr4)(unsigned long);
+ /*
+ * Get/set interrupt state. save_fl and restore_fl are only
+ * expected to use X86_EFLAGS_IF; all other bits
+ * returned from save_fl are undefined, and may be ignored by
+ * restore_fl.
+ */
unsigned long (*save_fl)(void);
void (*restore_fl)(unsigned long);
void (*irq_disable)(void);
void (*irq_enable)(void);
void (*safe_halt)(void);
void (*halt)(void);
+
void (*wbinvd)(void);
- /* err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
+ /* MSR, PMC and TSR operations.
+ err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
u64 (*read_msr)(unsigned int msr, int *err);
int (*write_msr)(unsigned int msr, u64 val);
@@ -88,6 +115,7 @@ struct paravirt_ops
u64 (*get_scheduled_cycles)(void);
unsigned long (*get_cpu_khz)(void);
+ /* Segment descriptor handling */
void (*load_tr_desc)(void);
void (*load_gdt)(const struct Xgt_desc_struct *);
void (*load_idt)(const struct Xgt_desc_struct *);
@@ -105,9 +133,12 @@ struct paravirt_ops
void (*load_esp0)(struct tss_struct *tss, struct thread_struct *t);
void (*set_iopl_mask)(unsigned mask);
-
void (*io_delay)(void);
+ /*
+ * Hooks for intercepting the creation/use/destruction of an
+ * mm_struct.
+ */
void (*activate_mm)(struct mm_struct *prev,
struct mm_struct *next);
void (*dup_mmap)(struct mm_struct *oldmm,
@@ -115,30 +146,43 @@ struct paravirt_ops
void (*exit_mmap)(struct mm_struct *mm);
#ifdef CONFIG_X86_LOCAL_APIC
+ /*
+ * Direct APIC operations, principally for VMI. Ideally
+ * these shouldn't be in this interface.
+ */
void (*apic_write)(unsigned long reg, unsigned long v);
void (*apic_write_atomic)(unsigned long reg, unsigned long v);
unsigned long (*apic_read)(unsigned long reg);
void (*setup_boot_clock)(void);
void (*setup_secondary_clock)(void);
+
+ void (*startup_ipi_hook)(int phys_apicid,
+ unsigned long start_eip,
+ unsigned long start_esp);
#endif
+ /* TLB operations */
void (*flush_tlb_user)(void);
void (*flush_tlb_kernel)(void);
void (*flush_tlb_single)(unsigned long addr);
void (*map_pt_hook)(int type, pte_t *va, u32 pfn);
+ /* Hooks for allocating/releasing pagetable pages */
void (*alloc_pt)(u32 pfn);
void (*alloc_pd)(u32 pfn);
void (*alloc_pd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
void (*release_pt)(u32 pfn);
void (*release_pd)(u32 pfn);
+ /* Pagetable manipulation functions */
void (*set_pte)(pte_t *ptep, pte_t pteval);
- void (*set_pte_at)(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval);
+ void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval);
void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
void (*pte_update)(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
- void (*pte_update_defer)(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+ void (*pte_update_defer)(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep);
pte_t (*ptep_get_and_clear)(pte_t *ptep);
@@ -164,13 +208,12 @@ struct paravirt_ops
pgd_t (*make_pgd)(unsigned long pgd);
#endif
- void (*set_lazy_mode)(int mode);
+ /* Set deferred update mode, used for batching operations. */
+ void (*set_lazy_mode)(enum paravirt_lazy_mode mode);
/* These two are jmp to, not actually called. */
void (*irq_enable_sysexit)(void);
void (*iret)(void);
-
- void (*startup_ipi_hook)(int phys_apicid, unsigned long start_eip, unsigned long start_esp);
};
/* Mark a paravirt probe function. */
@@ -188,8 +231,10 @@ extern struct paravirt_ops paravirt_ops;
#define paravirt_clobber(clobber) \
[paravirt_clobber] "i" (clobber)
-#define PARAVIRT_CALL "call *(paravirt_ops+%c[paravirt_typenum]*4);"
-
+/*
+ * Generate some code, and mark it as patchable by the
+ * apply_paravirt() alternate instruction patcher.
+ */
#define _paravirt_alt(insn_string, type, clobber) \
"771:\n\t" insn_string "\n" "772:\n" \
".pushsection .parainstructions,\"a\"\n" \
@@ -199,9 +244,74 @@ extern struct paravirt_ops paravirt_ops;
" .short " clobber "\n" \
".popsection\n"
+/* Generate patchable code, with the default asm parameters. */
#define paravirt_alt(insn_string) \
_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
+/*
+ * This generates an indirect call based on the operation type number.
+ * The type number, computed in PARAVIRT_PATCH, is derived from the
+ * offset into the paravirt_ops structure, and can therefore be freely
+ * converted back into a structure offset.
+ */
+#define PARAVIRT_CALL "call *(paravirt_ops+%c[paravirt_typenum]*4);"
+
+/*
+ * These macros are intended to wrap calls into a paravirt_ops
+ * operation, so that they can be later identified and patched at
+ * runtime.
+ *
+ * Normally, a call to a pv_op function is a simple indirect call:
+ * (paravirt_ops.operations)(args...).
+ *
+ * Unfortunately, this is a relatively slow operation for modern CPUs,
+ * because it cannot necessarily determine what the destination
+ * address is. In this case, the address is a runtime constant, so at
+ * the very least we can patch the call to e a simple direct call, or
+ * ideally, patch an inline implementation into the callsite. (Direct
+ * calls are essentially free, because the call and return addresses
+ * are completely predictable.)
+ *
+ * These macros rely on the standard gcc "regparm(3)" calling
+ * convention, in which the first three arguments are placed in %eax,
+ * %edx, %ecx (in that order), and the remaining arguments are placed
+ * on the stack. All caller-save registers (eax,edx,ecx) are expected
+ * to be modified (either clobbered or used for return values).
+ *
+ * The call instruction itself is marked by placing its start address
+ * and size into the .parainstructions section, so that
+ * apply_paravirt() in arch/i386/kernel/alternative.c can do the
+ * appropriate patching under the control of the backend paravirt_ops
+ * implementation.
+ *
+ * Unfortunately there's no way to get gcc to generate the args setup
+ * for the call, and then allow the call itself to be generated by an
+ * inline asm. Because of this, we must do the complete arg setup and
+ * return value handling from within these macros. This is fairly
+ * cumbersome.
+ *
+ * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
+ * It could be extended to more arguments, but there would be little
+ * to be gained from that. For each number of arguments, there are
+ * the two VCALL and CALL variants for void and non-void functions.
+ *
+ * When there is a return value, the invoker of the macro must specify
+ * the return type. The macro then uses sizeof() on that type to
+ * determine whether its a 32 or 64 bit value, and places the return
+ * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
+ * 64-bit).
+ *
+ * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
+ * in low,high order.
+ *
+ * Small structures are passed and returned in registers. The macro
+ * calling convention can't directly deal with this, so the wrapper
+ * functions must do this.
+ *
+ * These PVOP_* macros are only defined within this header. This
+ * means that all uses must be wrapped in inline functions. This also
+ * makes sure the incoming and outgoing types are always correct.
+ */
#define PVOP_CALL0(__rettype, __op) \
({ \
__rettype __ret; \
@@ -1026,6 +1136,7 @@ static inline unsigned long __raw_local_irq_save(void)
[paravirt_sti_type] "i" (PARAVIRT_PATCH(irq_enable)), \
paravirt_clobber(CLBR_EAX)
+/* Make sure as little as possible of this mess escapes. */
#undef PARAVIRT_CALL
#undef PVOP_VCALL0
#undef PVOP_CALL0