diff options
147 files changed, 12118 insertions, 2174 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 2dd1f300a5c..795d0ac67c2 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -47,10 +47,6 @@ config GENERIC_IRQ_PROBE bool default y -config GENERIC_TIME - bool - default n - config GENERIC_GPIO bool default y @@ -224,16 +220,6 @@ config BF54x depends on (BF542 || BF544 || BF547 || BF548 || BF549) default y -config BFIN_DUAL_CORE - bool - depends on (BF561) - default y - -config BFIN_SINGLE_CORE - bool - depends on !BFIN_DUAL_CORE - default y - config MEM_GENERIC_BOARD bool depends on GENERIC_BOARD @@ -263,7 +249,7 @@ config MEM_MT48LC8M32B2B5_7 config MEM_MT48LC32M16A2TG_75 bool - depends on (BFIN527_EZKIT) + depends on (BFIN527_EZKIT || BFIN532_IP0X) default y source "arch/blackfin/mach-bf527/Kconfig" @@ -286,17 +272,34 @@ config CMDLINE to the kernel, you may specify one here. As a minimum, you should specify the memory size and the root device (e.g., mem=8M, root=/dev/nfs). +config BOOT_LOAD + hex "Kernel load address for booting" + default "0x1000" + range 0x1000 0x20000000 + help + This option allows you to set the load address of the kernel. + This can be useful if you are on a board which has a small amount + of memory or you wish to reserve some memory at the beginning of + the address space. + + Note that you need to keep this value above 4k (0x1000) as this + memory region is used to capture NULL pointer references as well + as some core kernel functions. + comment "Clock/PLL Setup" config CLKIN_HZ - int "Crystal Frequency in Hz" + int "Frequency of the crystal on the board in Hz" default "11059200" if BFIN533_STAMP default "27000000" if BFIN533_EZKIT default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS) default "30000000" if BFIN561_EZKIT default "24576000" if PNAV10 + default "10000000" if BFIN532_IP0X help The frequency of CLKIN crystal oscillator on the board in Hz. + Warning: This value should match the crystal on the board. Otherwise, + peripherals won't work properly. config BFIN_KERNEL_CLOCK bool "Re-program Clocks while Kernel boots?" @@ -307,6 +310,25 @@ config BFIN_KERNEL_CLOCK are also not changed, and the Bootloader does 100% of the hardware configuration. +config MEM_SIZE + int "SDRAM Memory Size in MBytes" + depends on BFIN_KERNEL_CLOCK + default 64 + +config MEM_ADD_WIDTH + int "Memory Address Width" + depends on BFIN_KERNEL_CLOCK + depends on (!BF54x) + range 8 11 + default 9 if BFIN533_EZKIT + default 9 if BFIN561_EZKIT + default 9 if H8606_HVSISTEMAS + default 10 if BFIN527_EZKIT + default 10 if BFIN537_STAMP + default 11 if BFIN533_STAMP + default 10 if PNAV10 + default 10 if BFIN532_IP0X + config PLL_BYPASS bool "Bypass PLL" depends on BFIN_KERNEL_CLOCK @@ -325,7 +347,7 @@ config VCO_MULT range 1 64 default "22" if BFIN533_EZKIT default "45" if BFIN533_STAMP - default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) + default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM) default "22" if BFIN533_BLUETECHNIX_CM default "20" if BFIN537_BLUETECHNIX_CM default "20" if BFIN561_BLUETECHNIX_CM @@ -360,19 +382,33 @@ config SCLK_DIV int "System Clock Divider" depends on BFIN_KERNEL_CLOCK range 1 15 - default 5 if BFIN533_EZKIT - default 5 if BFIN533_STAMP - default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) - default 5 if BFIN533_BLUETECHNIX_CM - default 4 if BFIN537_BLUETECHNIX_CM - default 4 if BFIN561_BLUETECHNIX_CM - default 5 if BFIN561_EZKIT - default 3 if H8606_HVSISTEMAS + default 5 help This sets the frequency of the system clock (including SDRAM or DDR). This can be between 1 and 15 System Clock = (PLL frequency) / (this setting) +config MAX_MEM_SIZE + int "Max SDRAM Memory Size in MBytes" + depends on !BFIN_KERNEL_CLOCK && !MPU + default 512 + help + This is the max memory size that the kernel will create CPLB + tables for. Your system will not be able to handle any more. + +choice + prompt "DDR SDRAM Chip Type" + depends on BFIN_KERNEL_CLOCK + depends on BF54x + default MEM_MT46V32M16_5B + +config MEM_MT46V32M16_6T + bool "MT46V32M16_6T" + +config MEM_MT46V32M16_5B + bool "MT46V32M16_5B" +endchoice + # # Max & Min Speeds for various Chips # @@ -415,42 +451,33 @@ comment "Kernel Timer/Scheduler" source kernel/Kconfig.hz -comment "Memory Setup" - -config MEM_SIZE - int "SDRAM Memory Size in MBytes" - default 32 if BFIN533_EZKIT - default 64 if BFIN527_EZKIT - default 64 if BFIN537_STAMP - default 64 if BFIN548_EZKIT - default 64 if BFIN561_EZKIT - default 128 if BFIN533_STAMP - default 64 if PNAV10 - default 32 if H8606_HVSISTEMAS +config GENERIC_TIME + bool "Generic time" + default y -config MEM_ADD_WIDTH - int "SDRAM Memory Address Width" - depends on (!BF54x) - default 9 if BFIN533_EZKIT - default 9 if BFIN561_EZKIT - default 9 if H8606_HVSISTEMAS - default 10 if BFIN527_EZKIT - default 10 if BFIN537_STAMP - default 11 if BFIN533_STAMP - default 10 if PNAV10 +config GENERIC_CLOCKEVENTS + bool "Generic clock events" + depends on GENERIC_TIME + default y +config CYCLES_CLOCKSOURCE + bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on GENERIC_CLOCKEVENTS + depends on !BFIN_SCRATCH_REG_CYCLES + default n + help + If you say Y here, you will enable support for using the 'cycles' + registers as a clock source. Doing so means you will be unable to + safely write to the 'cycles' register during runtime. You will + still be able to read it (such as for performance monitoring), but + writing the registers will most likely crash the kernel. -choice - prompt "DDR SDRAM Chip Type" - depends on BFIN548_EZKIT - default MEM_MT46V32M16_5B +source kernel/time/Kconfig -config MEM_MT46V32M16_6T - bool "MT46V32M16_6T" +comment "Memory Setup" -config MEM_MT46V32M16_5B - bool "MT46V32M16_5B" -endchoice +comment "Misc" config ENET_FLASH_PIN int "PF port/pin used for flash and ethernet sharing" @@ -462,20 +489,6 @@ config ENET_FLASH_PIN code. For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc. -config BOOT_LOAD - hex "Kernel load address for booting" - default "0x1000" - range 0x1000 0x20000000 - help - This option allows you to set the load address of the kernel. - This can be useful if you are on a board which has a small amount - of memory or you wish to reserve some memory at the beginning of - the address space. - - Note that you need to keep this value above 4k (0x1000) as this - memory region is used to capture NULL pointer references as well - as some core kernel functions. - choice prompt "Blackfin Exception Scratch Register" default BFIN_SCRATCH_REG_RETN @@ -661,14 +674,6 @@ endchoice source "mm/Kconfig" -config LARGE_ALLOCS - bool "Allow allocating large blocks (> 1MB) of memory" - help - Allow the slab memory allocator to keep chains for very large - memory sizes - upto 32MB. You may need this if your system has - a lot of RAM, and you need to able to allocate very large - contiguous chunks. If unsure, say N. - config BFIN_GPTIMERS tristate "Enable Blackfin General Purpose Timers API" default n diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 75eba2ca788..3cbe16caad4 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -72,6 +72,11 @@ rev-$(CONFIG_BF_REV_ANY) := any KBUILD_CFLAGS += -mcpu=$(cpu-y)-$(rev-y) KBUILD_AFLAGS += -mcpu=$(cpu-y)-$(rev-y) +# - we utilize the silicon rev from the toolchain, so move it over to the checkflags +# - the l1_text attribute is Blackfin specific, so fake it out as used to kill warnings +CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }') +CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -Dl1_text=__used__ + head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/ diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore new file mode 100644 index 00000000000..3ae03994b88 --- /dev/null +++ b/arch/blackfin/boot/.gitignore @@ -0,0 +1 @@ ++vmImage diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index ae320dcfede..64876dfc2e5 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -250,7 +250,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y @@ -720,8 +720,8 @@ CONFIG_BFIN_OTP=y # CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_SERIAL_BFIN_DMA is not set -CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 9621caa60b5..8d817ba0194 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -212,7 +212,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=32 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index b51e76ce7f4..20d598d17bd 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -212,7 +212,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=128 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=11 CONFIG_ENET_FLASH_PIN=0 CONFIG_BOOT_LOAD=0x1000 diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index d45fa535dad..b5189c8ba26 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -220,7 +220,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index c9707f7665a..5bfdfb287d1 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -285,7 +285,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 # CONFIG_MEM_MT46V32M16_6T is not set CONFIG_MEM_MT46V32M16_5B=y CONFIG_BOOT_LOAD=0x1000 @@ -813,8 +813,8 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_SERIAL_BFIN_DMA is not set -CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 4d8a6333130..b4a20c89081 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -256,7 +256,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=512 CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig new file mode 100644 index 00000000000..560890fe0d3 --- /dev/null +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -0,0 +1,912 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.16 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +CONFIG_BF533=y +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +CONFIG_BFIN533_BLUETECHNIX_CM=y +# CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_GENERIC_BF533_BOARD is not set + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=750000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig new file mode 100644 index 00000000000..9f66d2de100 --- /dev/null +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -0,0 +1,940 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.16 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +CONFIG_BFIN537_BLUETECHNIX_CM=y +# CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig new file mode 100644 index 00000000000..2694d06c5bd --- /dev/null +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -0,0 +1,940 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.16 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +CONFIG_BFIN537_BLUETECHNIX_CM=y +# CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=30000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0xFFC3 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_BFIN_MAC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +CONFIG_USB_GADGET_NET2272=y +CONFIG_USB_NET2272=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig new file mode 100644 index 00000000000..90207251c53 --- /dev/null +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -0,0 +1,1373 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.4 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +CONFIG_BF548=y +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +CONFIG_BF_REV_0_0=y +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF54x=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_CNT=8 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 +CONFIG_IRQ_TIMER0=11 +CONFIG_IRQ_TIMER1=11 +CONFIG_IRQ_TIMER2=11 +CONFIG_IRQ_TIMER3=11 +CONFIG_IRQ_TIMER4=11 +CONFIG_IRQ_TIMER5=11 +CONFIG_IRQ_TIMER6=11 +CONFIG_IRQ_TIMER7=11 +CONFIG_IRQ_TIMER8=11 +CONFIG_IRQ_TIMER9=11 +CONFIG_IRQ_TIMER10=11 +# CONFIG_BFIN548_EZKIT is not set +CONFIG_BFIN548_BLUETECHNIX_CM=y + +# +# BF548 Specific Configuration +# +# CONFIG_DEB_DMA_URGENT is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMAC0_ERR=7 +CONFIG_IRQ_EPPI0_ERR=7 +CONFIG_IRQ_SPORT0_ERR=7 +CONFIG_IRQ_SPORT1_ERR=7 +CONFIG_IRQ_SPI0_ERR=7 +CONFIG_IRQ_UART0_ERR=7 +CONFIG_IRQ_EPPI0=8 +CONFIG_IRQ_SPI0=10 +CONFIG_IRQ_PINT0=12 +CONFIG_IRQ_PINT1=12 +CONFIG_IRQ_MDMAS0=13 +CONFIG_IRQ_MDMAS1=13 +CONFIG_IRQ_WATCHDOG=13 +CONFIG_IRQ_DMAC1_ERR=7 +CONFIG_IRQ_SPORT2_ERR=7 +CONFIG_IRQ_SPORT3_ERR=7 +CONFIG_IRQ_MXVR_DATA=7 +CONFIG_IRQ_SPI1_ERR=7 +CONFIG_IRQ_SPI2_ERR=7 +CONFIG_IRQ_UART1_ERR=7 +CONFIG_IRQ_UART2_ERR=7 +CONFIG_IRQ_CAN0_ERR=7 +CONFIG_IRQ_SPORT2_RX=9 +CONFIG_IRQ_SPORT2_TX=9 +CONFIG_IRQ_SPORT3_RX=9 +CONFIG_IRQ_SPORT3_TX=9 +CONFIG_IRQ_EPPI1=9 +CONFIG_IRQ_EPPI2=9 +CONFIG_IRQ_SPI1=10 +CONFIG_IRQ_SPI2=10 +CONFIG_IRQ_ATAPI_RX=10 +CONFIG_IRQ_ATAPI_TX=10 +CONFIG_IRQ_TWI0=11 +CONFIG_IRQ_TWI1=11 +CONFIG_IRQ_CAN0_RX=11 +CONFIG_IRQ_CAN0_TX=11 +CONFIG_IRQ_MDMAS2=13 +CONFIG_IRQ_MDMAS3=13 +CONFIG_IRQ_MXVR_ERR=11 +CONFIG_IRQ_MXVR_MSG=11 +CONFIG_IRQ_MXVR_PKT=11 +CONFIG_IRQ_EPPI1_ERR=7 +CONFIG_IRQ_EPPI2_ERR=7 +CONFIG_IRQ_UART3_ERR=7 +CONFIG_IRQ_HOST_ERR=7 +CONFIG_IRQ_PIXC_ERR=7 +CONFIG_IRQ_NFC_ERR=7 +CONFIG_IRQ_ATAPI_ERR=7 +CONFIG_IRQ_CAN1_ERR=7 +CONFIG_IRQ_HS_DMA_ERR=7 +CONFIG_IRQ_PIXC_IN0=8 +CONFIG_IRQ_PIXC_IN1=8 +CONFIG_IRQ_PIXC_OUT=8 +CONFIG_IRQ_SDH=8 +CONFIG_IRQ_KEY=8 +CONFIG_IRQ_CAN1_RX=11 +CONFIG_IRQ_CAN1_TX=11 +CONFIG_IRQ_SDH_MASK0=11 +CONFIG_IRQ_SDH_MASK1=11 +CONFIG_IRQ_OTPSEC=11 +CONFIG_IRQ_PINT2=11 +CONFIG_IRQ_PINT3=11 + +# +# Pin Interrupt to Port Assignment +# + +# +# Assignment +# +CONFIG_PINTx_REASSIGN=y +CONFIG_PINT0_ASSIGN=0x00000101 +CONFIG_PINT1_ASSIGN=0x01010000 +CONFIG_PINT2_ASSIGN=0x07000101 +CONFIG_PINT3_ASSIGN=0x02020303 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_GENERIC_TIME is not set +# CONFIG_TICK_ONESHOT is not set + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=64 +# CONFIG_MEM_MT46V32M16_6T is not set +CONFIG_MEM_MT46V32M16_5B=y +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +# CONFIG_SCHEDULE_L1 is not set +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +# CONFIG_C_CDPRIO is not set +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x5554 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 +CONFIG_EBIU_MBSCTLVAL=0x0 +CONFIG_EBIU_MODEVAL=0x1 +CONFIG_EBIU_FCTLVAL=0x6 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_SMSC911X=y +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_BFIN is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +# CONFIG_SERIAL_BFIN_DMA is not set +CONFIG_SERIAL_BFIN_PIO=y +# CONFIG_SERIAL_BFIN_UART0 is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART2 is not set +# CONFIG_SERIAL_BFIN_UART3 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# Blackfin BF54x, BF525 and BF527 high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +# CONFIG_USB_INVENTRA_DMA is not set +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_SDH_BFIN=y +# CONFIG_MMC_SPI is not set +# CONFIG_SPI_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig new file mode 100644 index 00000000000..daf00906c1e --- /dev/null +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -0,0 +1,876 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.4 +# Tue Apr 1 10:50:11 2008 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +CONFIG_BF561=y +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BFIN_DUAL_CORE=y +CONFIG_MEM_MT48LC8M32B2B5_7=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_SPI_ERROR=7 +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set +CONFIG_BFIN561_BLUETECHNIX_CM=y +# CONFIG_GENERIC_BF561_BOARD is not set + +# +# BF561 Specific Configuration +# + +# +# Core B Support +# + +# +# Core B Support +# +CONFIG_BF561_COREB=y +# CONFIG_BF561_COREB_RESET is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA1_ERROR=7 +CONFIG_IRQ_DMA2_ERROR=7 +CONFIG_IRQ_IMDMA_ERROR=7 +CONFIG_IRQ_PPI0_ERROR=7 +CONFIG_IRQ_PPI1_ERROR=7 +CONFIG_IRQ_UART_ERROR=7 +CONFIG_IRQ_RESERVED_ERROR=7 +CONFIG_IRQ_DMA1_0=8 +CONFIG_IRQ_DMA1_1=8 +CONFIG_IRQ_DMA1_2=8 +CONFIG_IRQ_DMA1_3=8 +CONFIG_IRQ_DMA1_4=8 +CONFIG_IRQ_DMA1_5=8 +CONFIG_IRQ_DMA1_6=8 +CONFIG_IRQ_DMA1_7=8 +CONFIG_IRQ_DMA1_8=8 +CONFIG_IRQ_DMA1_9=8 +CONFIG_IRQ_DMA1_10=8 +CONFIG_IRQ_DMA1_11=8 +CONFIG_IRQ_DMA2_0=9 +CONFIG_IRQ_DMA2_1=9 +CONFIG_IRQ_DMA2_2=9 +CONFIG_IRQ_DMA2_3=9 +CONFIG_IRQ_DMA2_4=9 +CONFIG_IRQ_DMA2_5=9 +CONFIG_IRQ_DMA2_6=9 +CONFIG_IRQ_DMA2_7=9 +CONFIG_IRQ_DMA2_8=9 +CONFIG_IRQ_DMA2_9=9 +CONFIG_IRQ_DMA2_10=9 +CONFIG_IRQ_DMA2_11=9 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 +CONFIG_IRQ_TIMER8=10 +CONFIG_IRQ_TIMER9=10 +CONFIG_IRQ_TIMER10=10 +CONFIG_IRQ_TIMER11=10 +CONFIG_IRQ_PROG0_INTA=11 +CONFIG_IRQ_PROG0_INTB=11 +CONFIG_IRQ_PROG1_INTA=11 +CONFIG_IRQ_PROG1_INTB=11 +CONFIG_IRQ_PROG2_INTA=11 +CONFIG_IRQ_PROG2_INTB=11 +CONFIG_IRQ_DMA1_WRRD0=8 +CONFIG_IRQ_DMA1_WRRD1=8 +CONFIG_IRQ_DMA2_WRRD0=9 +CONFIG_IRQ_DMA2_WRRD1=9 +CONFIG_IRQ_IMDMA_WRRD0=12 +CONFIG_IRQ_IMDMA_WRRD1=12 +CONFIG_IRQ_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +CONFIG_C_B0PEN=y +CONFIG_C_B1PEN=y +CONFIG_C_B2PEN=y +# CONFIG_C_B3PEN is not set +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set +# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE0 is not set +# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE1 is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DUAL_CORE_TEST_MODULE is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 18cbb8c3c37..679c7483ea7 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -207,7 +207,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=32 +CONFIG_MAX_MEM_SIZE=32 CONFIG_MEM_ADD_WIDTH=9 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig new file mode 100644 index 00000000000..5f6ff04a86c --- /dev/null +++ b/arch/blackfin/configs/IP0X_defconfig @@ -0,0 +1,1252 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.18 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +CONFIG_BF532=y +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC32M16A2TG_75=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_H8606_HVSISTEMAS is not set +CONFIG_BFIN532_IP0X=y +# CONFIG_GENERIC_BF533_BOARD is not set + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=10000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=400000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 + +# +# Hardware addresses +# +CONFIG_IP0X_NET1=0x20100000 +CONFIG_IP0X_NET2=0x20200000 +CONFIG_IP0X_USB=0x20300000 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +# CONFIG_BFIN_ICACHE is not set +# CONFIG_BFIN_DCACHE is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0xffc2 +CONFIG_BANK_1=0xffc2 +CONFIG_BANK_2=0xffc2 +CONFIG_BANK_3=0xffc2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=y +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +CONFIG_NETFILTER_XT_MATCH_MAC=y +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_IPRANGE=y +CONFIG_IP_NF_MATCH_TOS=y +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_TOS=y +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_UCLINUX=y +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_BFIN=y +CONFIG_BFIN_NAND_BASE=0x20000000 +CONFIG_BFIN_NAND_SIZE=0x10000000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=10 +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set +CONFIG_DM9000=y +CONFIG_NETDEV_1000=y +# CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_AD5304 is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_BFIN_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_ISP1362_HCD=y +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_SPI_MMC=m +CONFIG_SPI_MMC_FRAMEWORK_DRIVER=y +# CONFIG_SPI_MMC_BFIN_PIO_SPI is not set +CONFIG_SPI_MMC_CS_CHAN=5 +CONFIG_SPI_MMC_MAX_HZ=20000000 +# CONFIG_SPI_MMC_CARD_DETECT is not set +# CONFIG_SPI_MMC_DEBUG_MODE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=m +# CONFIG_SECURITY_ROOTPLUG is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 25709f504d8..87622ad9df4 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -13,7 +13,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -214,7 +214,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=64 CONFIG_MEM_ADD_WIDTH=10 CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig new file mode 100644 index 00000000000..951ea041257 --- /dev/null +++ b/arch/blackfin/configs/SRV1_defconfig @@ -0,0 +1,1290 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.10 +# Fri Nov 2 20:50:23 2007 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN527_EZKIT is not set +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN537_STAMP is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN548_EZKIT is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_BFIN561_TEPLA is not set +# CONFIG_PNAV10 is not set +# CONFIG_VISTASCAN is not set +# CONFIG_BFIN533_SR3K is not set +CONFIG_GENERIC_BOARD=y +CONFIG_MEM_GENERIC_BOARD=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=22118400 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x400000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +CONFIG_DMA_UNCACHED_2M=y +# CONFIG_DMA_UNCACHED_1M is not set +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set +# CONFIG_PM_WAKEUP_GPIO_API is not set +CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_MW320D=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_BF5xx=m +CONFIG_BFIN_FLASH_SIZE=0x400000 +CONFIG_EBIU_FLASH_BASE=0x20000000 +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_BFIN=m +CONFIG_BFIN_NAND_BASE=0x20212000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=3 +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y +# CONFIG_BF53X_PFBUTTONS is not set +# CONFIG_TWI_KEYPAD is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +CONFIG_BF5xx_PFLAGS=y +# CONFIG_BF5xx_PFLAGS_PROC is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +# CONFIG_AD5304 is not set +# CONFIG_BF5xx_TEA5764 is not set +# CONFIG_BF5xx_FBDMA is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y +CONFIG_HW_RANDOM=m +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_BLACKFIN_GPIO is not set +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=m +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=m +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=y +# CONFIG_VIDEO_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_PPI_GENERIC is not set +CONFIG_VIDEO_BLACKFIN_CAM=m +# CONFIG_VIDEO_BLACKFIN_MT9M001 is not set + +# +# CMOS Camera Sensor Selection +# +# CONFIG_MT9V022 is not set +# CONFIG_MT9M001 is not set +# CONFIG_VS6524 is not set +# CONFIG_VS6624 is not set +CONFIG_OV9655=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +# CONFIG_HID is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_MMRS is not set +# CONFIG_DEBUG_HWERR is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 318b9b692a4..6140cd69c78 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -6,9 +6,15 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ - sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ + sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ fixed_code.o reboot.o bfin_gpio.o +ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) + obj-y += time-ts.o +else + obj-y += time.o +endif + obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 8fd5d22cec3..fd5448d6107 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -67,7 +67,7 @@ static int __init blackfin_dma_init(void) for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { dma_ch[i].chan_status = DMA_CHANNEL_FREE; - dma_ch[i].regs = base_addr[i]; + dma_ch[i].regs = dma_io_base_addr[i]; mutex_init(&(dma_ch[i].dmalock)); } /* Mark MEMDMA Channel 0 as requested since we're using it internally */ @@ -106,12 +106,15 @@ int request_dma(unsigned int channel, char *device_id) #ifdef CONFIG_BF54x if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { - if (strncmp(device_id, "BFIN_UART", 9) == 0) + if (strncmp(device_id, "BFIN_UART", 9) == 0) { + dma_ch[channel].regs->peripheral_map &= 0x0FFF; dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0xC); - else + ((channel - CH_UART2_RX + 0xC)<<12); + } else { + dma_ch[channel].regs->peripheral_map &= 0x0FFF; dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0x6); + ((channel - CH_UART2_RX + 0x6)<<12); + } } #endif diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 08788f7bbfb..7e8eaf4a31b 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -95,14 +95,14 @@ enum { AWA_data_clear = SYSCR, AWA_data_set = SYSCR, AWA_toggle = SYSCR, - AWA_maska = UART_SCR, - AWA_maska_clear = UART_SCR, - AWA_maska_set = UART_SCR, - AWA_maska_toggle = UART_SCR, - AWA_maskb = UART_GCTL, - AWA_maskb_clear = UART_GCTL, - AWA_maskb_set = UART_GCTL, - AWA_maskb_toggle = UART_GCTL, + AWA_maska = BFIN_UART_SCR, + AWA_maska_clear = BFIN_UART_SCR, + AWA_maska_set = BFIN_UART_SCR, + AWA_maska_toggle = BFIN_UART_SCR, + AWA_maskb = BFIN_UART_GCTL, + AWA_maskb_clear = BFIN_UART_GCTL, + AWA_maskb_set = BFIN_UART_GCTL, + AWA_maskb_toggle = BFIN_UART_GCTL, AWA_dir = SPORT1_STAT, AWA_polar = SPORT1_STAT, AWA_edge = SPORT1_STAT, @@ -348,11 +348,10 @@ static void portmux_setup(unsigned short per, unsigned short function) offset = port_mux_lut[y].offset; muxreg = bfin_read_PORT_MUX(); - if (offset != 1) { + if (offset != 1) muxreg &= ~(1 << offset); - } else { + else muxreg &= ~(3 << 1); - } muxreg |= (function << offset); bfin_write_PORT_MUX(muxreg); @@ -396,39 +395,11 @@ inline void portmux_setup(unsigned short portno, unsigned short function) # define portmux_setup(...) do { } while (0) #endif -#ifndef BF548_FAMILY -static void default_gpio(unsigned gpio) -{ - unsigned short bank, bitmask; - unsigned long flags; - - bank = gpio_bank(gpio); - bitmask = gpio_bit(gpio); - - local_irq_save(flags); - - gpio_bankb[bank]->maska_clear = bitmask; - gpio_bankb[bank]->maskb_clear = bitmask; - SSYNC(); - gpio_bankb[bank]->inen &= ~bitmask; - gpio_bankb[bank]->dir &= ~bitmask; - gpio_bankb[bank]->polar &= ~bitmask; - gpio_bankb[bank]->both &= ~bitmask; - gpio_bankb[bank]->edge &= ~bitmask; - AWA_DUMMY_READ(edge); - local_irq_restore(flags); -} -#else -# define default_gpio(...) do { } while (0) -#endif - static int __init bfin_gpio_init(void) { - printk(KERN_INFO "Blackfin GPIO Controller\n"); return 0; - } arch_initcall(bfin_gpio_init); @@ -821,10 +792,10 @@ int peripheral_request(unsigned short per, const char *label) local_irq_save(flags); if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + dump_stack(); printk(KERN_ERR "%s: Peripheral %d is already reserved as GPIO by %s !\n", - __FUNCTION__, ident, get_label(ident)); - dump_stack(); + __func__, ident, get_label(ident)); local_irq_restore(flags); return -EBUSY; } @@ -833,31 +804,31 @@ int peripheral_request(unsigned short per, const char *label) u16 funct = get_portmux(ident); - /* - * Pin functions like AMC address strobes my - * be requested and used by several drivers - */ + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { - /* - * Allow that the identical pin function can - * be requested from the same driver twice - */ + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ - if (cmp_label(ident, label) == 0) - goto anyway; + if (cmp_label(ident, label) == 0) + goto anyway; + dump_stack(); printk(KERN_ERR "%s: Peripheral %d function %d is already reserved by %s !\n", - __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); - dump_stack(); + __func__, ident, P_FUNCT2MUX(per), get_label(ident)); local_irq_restore(flags); return -EBUSY; } } -anyway: + anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); portmux_setup(ident, P_FUNCT2MUX(per)); @@ -890,47 +861,47 @@ int peripheral_request(unsigned short per, const char *label) if (!check_gpio(ident)) { - if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { - printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO by %s !\n", - __FUNCTION__, ident, get_label(ident)); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } + if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + dump_stack(); + printk(KERN_ERR + "%s: Peripheral %d is already reserved as GPIO by %s !\n", + __func__, ident, get_label(ident)); + local_irq_restore(flags); + return -EBUSY; + } } if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { - /* - * Pin functions like AMC address strobes my - * be requested and used by several drivers - */ + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ - if (!(per & P_MAYSHARE)) { + if (!(per & P_MAYSHARE)) { - /* - * Allow that the identical pin function can - * be requested from the same driver twice - */ + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ - if (cmp_label(ident, label) == 0) - goto anyway; + if (cmp_label(ident, label) == 0) + goto anyway; + dump_stack(); printk(KERN_ERR "%s: Peripheral %d function %d is already" " reserved by %s !\n", - __FUNCTION__, ident, P_FUNCT2MUX(per), + __func__, ident, P_FUNCT2MUX(per), get_label(ident)); - dump_stack(); local_irq_restore(flags); return -EBUSY; } } -anyway: + anyway: portmux_setup(per, P_FUNCT2MUX(per)); port_setup(ident, PERIPHERAL_USAGE); @@ -944,7 +915,7 @@ anyway: EXPORT_SYMBOL(peripheral_request); #endif -int peripheral_request_list(unsigned short per[], const char *label) +int peripheral_request_list(const unsigned short per[], const char *label) { u16 cnt; int ret; @@ -954,10 +925,10 @@ int peripheral_request_list(unsigned short per[], const char *label) ret = peripheral_request(per[cnt], label); if (ret < 0) { - for ( ; cnt > 0; cnt--) { + for ( ; cnt > 0; cnt--) peripheral_free(per[cnt - 1]); - } - return ret; + + return ret; } } @@ -981,15 +952,13 @@ void peripheral_free(unsigned short per) local_irq_save(flags); - if (unlikely(!(reserved_peri_map[gpio_bank(ident)] - & gpio_bit(ident)))) { + if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { local_irq_restore(flags); return; } - if (!(per & P_MAYSHARE)) { + if (!(per & P_MAYSHARE)) port_setup(ident, GPIO_USAGE); - } reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); @@ -999,14 +968,11 @@ void peripheral_free(unsigned short per) } EXPORT_SYMBOL(peripheral_free); -void peripheral_free_list(unsigned short per[]) +void peripheral_free_list(const unsigned short per[]) { u16 cnt; - - for (cnt = 0; per[cnt] != 0; cnt++) { + for (cnt = 0; per[cnt] != 0; cnt++) peripheral_free(per[cnt]); - } - } EXPORT_SYMBOL(peripheral_free_list); @@ -1046,17 +1012,17 @@ int gpio_request(unsigned gpio, const char *label) } if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + dump_stack(); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", gpio, get_label(gpio)); - dump_stack(); local_irq_restore(flags); return -EBUSY; } if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + dump_stack(); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", gpio, get_label(gpio)); - dump_stack(); local_irq_restore(flags); return -EBUSY; } @@ -1082,14 +1048,12 @@ void gpio_free(unsigned gpio) local_irq_save(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { - gpio_error(gpio); dump_stack(); + gpio_error(gpio); local_irq_restore(flags); return; } - default_gpio(gpio); - reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); set_label(gpio, "free"); @@ -1152,6 +1116,18 @@ int gpio_get_value(unsigned gpio) } EXPORT_SYMBOL(gpio_get_value); +void bfin_gpio_irq_prepare(unsigned gpio) +{ + unsigned long flags; + + port_setup(gpio, GPIO_USAGE); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + local_irq_restore(flags); +} + #else int gpio_direction_input(unsigned gpio) @@ -1218,6 +1194,11 @@ void bfin_gpio_reset_spi0_ssel1(void) udelay(1); } +void bfin_gpio_irq_prepare(unsigned gpio) +{ + port_setup(gpio, GPIO_USAGE); +} + #endif /*BF548_FAMILY */ #if defined(CONFIG_PROC_FS) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c index bd072299f7f..822beefa3a4 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c @@ -39,14 +39,6 @@ #include <asm/cplbinit.h> #include <asm/blackfin.h> -#define CPLB_I 1 -#define CPLB_D 2 - -#define SYNC_SYS SSYNC() -#define SYNC_CORE CSYNC() - -#define CPLB_BIT_PAGESIZE 0x30000 - static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index dc6e8a7a8bd..48060105346 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -43,13 +43,15 @@ void __init generate_cpl_tables(void) unsigned long d_data, i_data; unsigned long d_cache = 0, i_cache = 0; + printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n"); + #ifdef CONFIG_BFIN_ICACHE i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; #endif #ifdef CONFIG_BFIN_DCACHE d_cache = CPLB_L1_CHBL; -#ifdef CONFIG_BLKFIN_WT +#ifdef CONFIG_BFIN_WT d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index c426a22f990..99f2831e296 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -24,8 +24,6 @@ #include <asm/cplbinit.h> #include <asm/mmu_context.h> -#ifdef CONFIG_BFIN_ICACHE - #define FAULT_RW (1 << 16) #define FAULT_USERSUPV (1 << 17) @@ -143,30 +141,48 @@ static noinline int dcplb_miss(void) unsigned long d_data; nr_dcplb_miss++; - if (addr >= _ramend) - return CPLB_PROT_VIOL; d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; #ifdef CONFIG_BFIN_DCACHE - d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; -#ifdef CONFIG_BLKFIN_WT - d_data |= CPLB_L1_AOW | CPLB_WT; -#endif + if (addr < _ramend - DMA_UNCACHED_REGION || + (reserved_mem_dcache_on && addr >= _ramend && + addr < physical_mem_end)) { + d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#ifdef CONFIG_BFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; #endif - mask = current_rwx_mask; - if (mask) { - int page = addr >> PAGE_SHIFT; - int offs = page >> 5; - int bit = 1 << (page & 31); - - if (mask[offs] & bit) - d_data |= CPLB_USER_RD; - - mask += page_mask_nelts; - if (mask[offs] & bit) - d_data |= CPLB_USER_WR; } +#endif + if (addr >= physical_mem_end) { + if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE + && (status & FAULT_USERSUPV)) { + addr &= ~0x3fffff; + d_data &= ~PAGE_SIZE_4KB; + d_data |= PAGE_SIZE_4MB; + } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH + && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) { + addr &= ~(1 * 1024 * 1024 - 1); + d_data &= ~PAGE_SIZE_4KB; + d_data |= PAGE_SIZE_1MB; + } else + return CPLB_PROT_VIOL; + } else if (addr >= _ramend) { + d_data |= CPLB_USER_RD | CPLB_USER_WR; + } else { + mask = current_rwx_mask; + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + if (mask[offs] & bit) + d_data |= CPLB_USER_RD; + mask += page_mask_nelts; + if (mask[offs] & bit) + d_data |= CPLB_USER_WR; + } + } idx = evict_one_dcplb(); addr &= PAGE_MASK; @@ -189,12 +205,14 @@ static noinline int icplb_miss(void) unsigned long i_data; nr_icplb_miss++; - if (status & FAULT_USERSUPV) - nr_icplb_supv_miss++; - if (addr >= _ramend) + /* If inside the uncached DMA region, fault. */ + if (addr >= _ramend - DMA_UNCACHED_REGION && addr < _ramend) return CPLB_PROT_VIOL; + if (status & FAULT_USERSUPV) + nr_icplb_supv_miss++; + /* * First, try to find a CPLB that matches this address. If we * find one, then the fact that we're in the miss handler means @@ -211,30 +229,48 @@ static noinline int icplb_miss(void) } i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB; -#ifdef CONFIG_BFIN_ICACHE - i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; -#endif +#ifdef CONFIG_BFIN_ICACHE /* - * Two cases to distinguish - a supervisor access must necessarily - * be for a module page; we grant it unconditionally (could do better - * here in the future). Otherwise, check the x bitmap of the current - * process. + * Normal RAM, and possibly the reserved memory area, are + * cacheable. */ - if (!(status & FAULT_USERSUPV)) { - unsigned long *mask = current_rwx_mask; - - if (mask) { - int page = addr >> PAGE_SHIFT; - int offs = page >> 5; - int bit = 1 << (page & 31); + if (addr < _ramend || + (addr < physical_mem_end && reserved_mem_icache_on)) + i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif - mask += 2 * page_mask_nelts; - if (mask[offs] & bit) - i_data |= CPLB_USER_RD; + if (addr >= physical_mem_end) { + if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH + && (status & FAULT_USERSUPV)) { + addr &= ~(1 * 1024 * 1024 - 1); + i_data &= ~PAGE_SIZE_4KB; + i_data |= PAGE_SIZE_1MB; + } else + return CPLB_PROT_VIOL; + } else if (addr >= _ramend) { + i_data |= CPLB_USER_RD; + } else { + /* + * Two cases to distinguish - a supervisor access must + * necessarily be for a module page; we grant it + * unconditionally (could do better here in the future). + * Otherwise, check the x bitmap of the current process. + */ + if (!(status & FAULT_USERSUPV)) { + unsigned long *mask = current_rwx_mask; + + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + mask += 2 * page_mask_nelts; + if (mask[offs] & bit) + i_data |= CPLB_USER_RD; + } } } - idx = evict_one_icplb(); addr &= PAGE_MASK; icplb_tbl[idx].addr = addr; @@ -250,7 +286,6 @@ static noinline int icplb_miss(void) static noinline int dcplb_protection_fault(void) { - unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); int status = bfin_read_DCPLB_STATUS(); nr_dcplb_prot++; @@ -280,8 +315,7 @@ int cplb_hdr(int seqstat, struct pt_regs *regs) case 0x26: return dcplb_miss(); default: - return 1; - panic_cplb_error(seqstat, regs); + return 1; } } @@ -299,7 +333,7 @@ void flush_switched_cplbs(void) enable_icplb(); disable_dcplb(); - for (i = first_mask_dcplb; i < MAX_CPLBS; i++) { + for (i = first_switched_dcplb; i < MAX_CPLBS; i++) { dcplb_tbl[i].data = 0; bfin_write32(DCPLB_DATA0 + i * 4, 0); } @@ -319,7 +353,7 @@ void set_mask_dcplbs(unsigned long *masks) d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; #ifdef CONFIG_BFIN_DCACHE d_data |= CPLB_L1_CHBL; -#ifdef CONFIG_BLKFIN_WT +#ifdef CONFIG_BFIN_WT d_data |= CPLB_L1_AOW | CPLB_WT; #endif #endif @@ -334,5 +368,3 @@ void set_mask_dcplbs(unsigned long *masks) } enable_dcplb(); } - -#endif diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c index a4f0b428a34..1e74f0b9799 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c @@ -33,9 +33,7 @@ #include <linux/proc_fs.h> #include <linux/uaccess.h> -#include <asm/current.h> -#include <asm/system.h> -#include <asm/cplb.h> +#include <asm/cplbinit.h> #include <asm/blackfin.h> #define CPLB_I 1 @@ -174,16 +172,6 @@ static int cplbinfo_read_proc(char *page, char **start, off_t off, return len; } -static int cplbinfo_write_proc(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - printk(KERN_INFO "Reset the CPLB swap in/out counts.\n"); - memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long)); - memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long)); - - return count; -} - static int __init cplbinfo_init(void) { struct proc_dir_entry *entry; @@ -193,7 +181,6 @@ static int __init cplbinfo_init(void) return -ENOMEM; entry->read_proc = cplbinfo_read_proc; - entry->write_proc = cplbinfo_write_proc; entry->data = NULL; return 0; diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 6320bc45fbb..917325bfbd8 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -26,6 +26,35 @@ #include <asm/cplb.h> #include <asm/cplbinit.h> +#ifdef CONFIG_MAX_MEM_SIZE +# define CPLB_MEM CONFIG_MAX_MEM_SIZE +#else +# define CPLB_MEM CONFIG_MEM_SIZE +#endif + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* possibly 1 for L2 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ +#define MAX_SWITCH_D_CPLBS (((CPLB_MEM / 4) + 16 + 1 + 1 + 1 \ + + ASYNC_MEMORY_CPLB_COVERAGE) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* possibly 1 for L2 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ +#define MAX_SWITCH_I_CPLBS (((CPLB_MEM / 4) + 12 + 1 + 1 + 1) * 2) + + u_long icplb_table[MAX_CPLBS + 1]; u_long dcplb_table[MAX_CPLBS + 1]; @@ -295,6 +324,8 @@ void __init generate_cpl_tables(void) struct cplb_tab *t_d = NULL; struct s_cplb cplb; + printk(KERN_INFO "NOMPU: setting up cplb tables for global access\n"); + cplb.init_i.size = MAX_CPLBS; cplb.init_d.size = MAX_CPLBS; cplb.switch_i.size = MAX_SWITCH_I_CPLBS; diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index d6b61d56b65..2f62a9f4058 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -59,7 +59,7 @@ void dma_alloc_init(unsigned long start, unsigned long end) memset((void *)dma_base, 0, DMA_UNCACHED_REGION); dma_initialized = 1; - printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __FUNCTION__, + printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __func__, dma_page, dma_pages, dma_base); } @@ -100,7 +100,7 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) int i; if ((page + pages) > dma_pages) { - printk(KERN_ERR "%s: freeing outside range.\n", __FUNCTION__); + printk(KERN_ERR "%s: freeing outside range.\n", __func__); BUG(); } diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 1904d8b5332..e698554895a 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -52,12 +52,14 @@ static volatile GPTIMER_timer_regs *const timer_regs[MAX_BLACKFIN_GPTIMERS] = (GPTIMER_timer_regs *)TIMER5_CONFIG, (GPTIMER_timer_regs *)TIMER6_CONFIG, (GPTIMER_timer_regs *)TIMER7_CONFIG, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) (GPTIMER_timer_regs *)TIMER8_CONFIG, (GPTIMER_timer_regs *)TIMER9_CONFIG, (GPTIMER_timer_regs *)TIMER10_CONFIG, +# if (MAX_BLACKFIN_GPTIMERS > 11) (GPTIMER_timer_regs *)TIMER11_CONFIG, +# endif +# endif #endif }; @@ -80,12 +82,14 @@ static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] = TIMER_STATUS_TRUN5, TIMER_STATUS_TRUN6, TIMER_STATUS_TRUN7, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) TIMER_STATUS_TRUN8, TIMER_STATUS_TRUN9, TIMER_STATUS_TRUN10, +# if (MAX_BLACKFIN_GPTIMERS > 11) TIMER_STATUS_TRUN11, +# endif +# endif #endif }; @@ -100,12 +104,14 @@ static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] = TIMER_STATUS_TOVF5, TIMER_STATUS_TOVF6, TIMER_STATUS_TOVF7, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) TIMER_STATUS_TOVF8, TIMER_STATUS_TOVF9, TIMER_STATUS_TOVF10, +# if (MAX_BLACKFIN_GPTIMERS > 11) TIMER_STATUS_TOVF11, +# endif +# endif #endif }; @@ -120,12 +126,14 @@ static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] = TIMER_STATUS_TIMIL5, TIMER_STATUS_TIMIL6, TIMER_STATUS_TIMIL7, -#endif -#if (MAX_BLACKFIN_GPTIMERS > 8) +# if (MAX_BLACKFIN_GPTIMERS > 8) TIMER_STATUS_TIMIL8, TIMER_STATUS_TIMIL9, TIMER_STATUS_TIMIL10, +# if (MAX_BLACKFIN_GPTIMERS > 11) TIMER_STATUS_TIMIL11, +# endif +# endif #endif }; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 6b8459c6616..be9fdd00d7c 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -32,6 +32,8 @@ #include <linux/unistd.h> #include <linux/user.h> #include <linux/uaccess.h> +#include <linux/sched.h> +#include <linux/tick.h> #include <linux/fs.h> #include <linux/err.h> @@ -69,33 +71,44 @@ EXPORT_SYMBOL(pm_power_off); * The idle loop on BFIN */ #ifdef CONFIG_IDLE_L1 -void default_idle(void)__attribute__((l1_text)); +static void default_idle(void)__attribute__((l1_text)); void cpu_idle(void)__attribute__((l1_text)); #endif -void default_idle(void) +/* + * This is our default idle handler. We need to disable + * interrupts here to ensure we don't miss a wakeup call. + */ +static void default_idle(void) { - while (!need_resched()) { - local_irq_disable(); - if (likely(!need_resched())) - idle_with_irq_disabled(); - local_irq_enable(); - } -} + local_irq_disable(); + if (!need_resched()) + idle_with_irq_disabled(); -void (*idle)(void) = default_idle; + local_irq_enable(); +} /* - * The idle thread. There's no useful work to be - * done, so just try to conserve power and have a - * low exit latency (ie sit in a loop waiting for - * somebody to say that they'd like to reschedule) + * The idle thread. We try to conserve power, while trying to keep + * overall latency low. The architecture specific idle is passed + * a value to indicate the level of "idleness" of the system. */ void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { - idle(); + void (*idle)(void) = pm_idle; + +#ifdef CONFIG_HOTPLUG_CPU + if (cpu_is_offline(smp_processor_id())) + cpu_die(); +#endif + if (!idle) + idle = default_idle; + tick_nohz_stop_sched_tick(); + while (!need_resched()) + idle(); + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); preempt_disable(); @@ -189,7 +202,7 @@ copy_thread(int nr, unsigned long clone_flags, * sys_execve() executes a new program. */ -asmlinkage int sys_execve(char *name, char **argv, char **envp) +asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp) { int error; char *filename; @@ -232,23 +245,25 @@ unsigned long get_wchan(struct task_struct *p) void finish_atomic_sections (struct pt_regs *regs) { + int __user *up0 = (int __user *)®s->p0; + if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END) return; switch (regs->pc) { case ATOMIC_XCHG32 + 2: - put_user(regs->r1, (int *)regs->p0); + put_user(regs->r1, up0); regs->pc += 2; break; case ATOMIC_CAS32 + 2: case ATOMIC_CAS32 + 4: if (regs->r0 == regs->r1) - put_user(regs->r2, (int *)regs->p0); + put_user(regs->r2, up0); regs->pc = ATOMIC_CAS32 + 8; break; case ATOMIC_CAS32 + 6: - put_user(regs->r2, (int *)regs->p0); + put_user(regs->r2, up0); regs->pc += 2; break; @@ -256,7 +271,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 + regs->r0; /* fall through */ case ATOMIC_ADD32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_ADD32 + 6; break; @@ -264,7 +279,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 - regs->r0; /* fall through */ case ATOMIC_SUB32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_SUB32 + 6; break; @@ -272,7 +287,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 | regs->r0; /* fall through */ case ATOMIC_IOR32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_IOR32 + 6; break; @@ -280,7 +295,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 & regs->r0; /* fall through */ case ATOMIC_AND32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_AND32 + 6; break; @@ -288,7 +303,7 @@ void finish_atomic_sections (struct pt_regs *regs) regs->r0 = regs->r1 ^ regs->r0; /* fall through */ case ATOMIC_XOR32 + 4: - put_user(regs->r0, (int *)regs->p0); + put_user(regs->r0, up0); regs->pc = ATOMIC_XOR32 + 6; break; } @@ -309,6 +324,12 @@ int _access_ok(unsigned long addr, unsigned long size) return 1; if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end) return 1; + +#ifdef CONFIG_ROMFS_MTD_FS + /* For XIP, allow user space to use pointers within the ROMFS. */ + if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end) + return 1; +#endif #else if (addr >= memory_start && (addr + size) <= physical_mem_end) return 1; diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 85caf9b711a..b4f062c172c 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -193,6 +193,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; int add = 0; + unsigned long __user *datap = (unsigned long __user *)data; switch (request) { /* when I and D space are separate, these will need to be fixed. */ @@ -229,7 +230,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp); if (copied != sizeof(tmp)) break; - ret = put_user(tmp, (unsigned long *)data); + ret = put_user(tmp, datap); break; } @@ -263,7 +264,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else { tmp = get_reg(child, addr); } - ret = put_user(tmp, (unsigned long *)data); + ret = put_user(tmp, datap); break; } @@ -389,7 +390,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { /* Get all gp regs from the child. */ - ret = ptrace_getregs(child, (void __user *)data); + ret = ptrace_getregs(child, datap); break; } diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index 483f93dfc1b..367e2dc0988 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -11,45 +11,56 @@ #include <asm/reboot.h> #include <asm/system.h> -#if defined(BF537_FAMILY) || defined(BF533_FAMILY) || defined(BF527_FAMILY) -#define SYSCR_VAL 0x0 -#elif defined(BF561_FAMILY) -#define SYSCR_VAL 0x20 -#elif defined(BF548_FAMILY) -#define SYSCR_VAL 0x10 -#endif - -/* - * Delay min 5 SCLK cycles using worst case CCLK/SCLK ratio (15) - */ -#define SWRST_DELAY (5 * 15) - -/* A system soft reset makes external memory unusable - * so force this function into L1. +/* A system soft reset makes external memory unusable so force + * this function into L1. We use the compiler ssync here rather + * than SSYNC() because it's safe (no interrupts and such) and + * we save some L1. We do not need to force sanity in the SYSCR + * register as the BMODE selection bit is cleared by the soft + * reset while the Core B bit (on dual core parts) is cleared by + * the core reset. */ __attribute__((l1_text)) void bfin_reset(void) { - /* force BMODE and disable Core B (as needed) */ - bfin_write_SYSCR(SYSCR_VAL); - - /* we use asm ssync here because it's save and we save some L1 */ - asm("ssync;"); + /* Wait for completion of "system" events such as cache line + * line fills so that we avoid infinite stalls later on as + * much as possible. This code is in L1, so it won't trigger + * any such event after this point in time. + */ + __builtin_bfin_ssync(); while (1) { - /* initiate system soft reset with magic 0x7 */ + /* Initiate System software reset. */ bfin_write_SWRST(0x7); - /* Wait for System reset to actually reset, needs to be 5 SCLKs, */ - /* Assume CCLK / SCLK ratio is worst case (15), and use 5*15 */ - - asm("LSETUP(.Lfoo,.Lfoo) LC0 = %0\n .Lfoo: NOP;\n" - : : "a" (SWRST_DELAY) : "LC0", "LT0", "LB0"); + /* Due to the way reset is handled in the hardware, we need + * to delay for 7 SCLKS. The only reliable way to do this is + * to calculate the CCLK/SCLK ratio and multiply 7. For now, + * we'll assume worse case which is a 1:15 ratio. + */ + asm( + "LSETUP (1f, 1f) LC0 = %0\n" + "1: nop;" + : + : "a" (15 * 7) + : "LC0", "LB0", "LT0" + ); - /* clear system soft reset */ + /* Clear System software reset */ bfin_write_SWRST(0); - asm("ssync;"); - /* issue core reset */ + + /* Wait for the SWRST write to complete. Cannot rely on SSYNC + * though as the System state is all reset now. + */ + asm( + "LSETUP (1f, 1f) LC1 = %0\n" + "1: nop;" + : + : "a" (15 * 1) + : "LC1", "LB1", "LT1" + ); + + /* Issue core reset */ asm("raise 1"); } } diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 2255c289a71..8efea004aec 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -35,6 +35,7 @@ u16 _bfin_swrst; EXPORT_SYMBOL(_bfin_swrst); unsigned long memory_start, memory_end, physical_mem_end; +unsigned long _rambase, _ramstart, _ramend; unsigned long reserved_mem_dcache_on; unsigned long reserved_mem_icache_on; EXPORT_SYMBOL(memory_start); @@ -106,7 +107,7 @@ void __init bf53x_relocate_l1_mem(void) l1_code_length = _etext_l1 - _stext_l1; if (l1_code_length > L1_CODE_LENGTH) - l1_code_length = L1_CODE_LENGTH; + panic("L1 Instruction SRAM Overflow\n"); /* cannot complain as printk is not available as yet. * But we can continue booting and complain later! */ @@ -116,19 +117,18 @@ void __init bf53x_relocate_l1_mem(void) l1_data_a_length = _ebss_l1 - _sdata_l1; if (l1_data_a_length > L1_DATA_A_LENGTH) - l1_data_a_length = L1_DATA_A_LENGTH; + panic("L1 Data SRAM Bank A Overflow\n"); /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); l1_data_b_length = _ebss_b_l1 - _sdata_b_l1; if (l1_data_b_length > L1_DATA_B_LENGTH) - l1_data_b_length = L1_DATA_B_LENGTH; + panic("L1 Data SRAM Bank B Overflow\n"); /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); - } /* add_memory_region to memmap */ @@ -547,11 +547,38 @@ static __init void memory_setup(void) ); } +/* + * Find the lowest, highest page frame number we have available + */ +void __init find_min_max_pfn(void) +{ + int i; + + max_pfn = 0; + min_low_pfn = memory_end; + + for (i = 0; i < bfin_memmap.nr_map; i++) { + unsigned long start, end; + /* RAM? */ + if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM) + continue; + start = PFN_UP(bfin_memmap.map[i].addr); + end = PFN_DOWN(bfin_memmap.map[i].addr + + bfin_memmap.map[i].size); + if (start >= end) + continue; + if (end > max_pfn) + max_pfn = end; + if (start < min_low_pfn) + min_low_pfn = start; + } +} + static __init void setup_bootmem_allocator(void) { int bootmap_size; int i; - unsigned long min_pfn, max_pfn; + unsigned long start_pfn, end_pfn; unsigned long curr_pfn, last_pfn, size; /* mark memory between memory_start and memory_end usable */ @@ -561,8 +588,19 @@ static __init void setup_bootmem_allocator(void) sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map); print_memory_map("boot memmap"); - min_pfn = PAGE_OFFSET >> PAGE_SHIFT; - max_pfn = memory_end >> PAGE_SHIFT; + /* intialize globals in linux/bootmem.h */ + find_min_max_pfn(); + /* pfn of the last usable page frame */ + if (max_pfn > memory_end >> PAGE_SHIFT) + max_pfn = memory_end >> PAGE_SHIFT; + /* pfn of last page frame directly mapped by kernel */ + max_low_pfn = max_pfn; + /* pfn of the first usable page frame after kernel image*/ + if (min_low_pfn < memory_start >> PAGE_SHIFT) + min_low_pfn = memory_start >> PAGE_SHIFT; + + start_pfn = PAGE_OFFSET >> PAGE_SHIFT; + end_pfn = memory_end >> PAGE_SHIFT; /* * give all the memory to the bootmap allocator, tell it to put the @@ -570,7 +608,7 @@ static __init void setup_bootmem_allocator(void) */ bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT, /* map goes here */ - min_pfn, max_pfn); + start_pfn, end_pfn); /* register the memmap regions with the bootmem allocator */ for (i = 0; i < bfin_memmap.nr_map; i++) { @@ -583,7 +621,7 @@ static __init void setup_bootmem_allocator(void) * We are rounding up the start address of usable memory: */ curr_pfn = PFN_UP(bfin_memmap.map[i].addr); - if (curr_pfn >= max_pfn) + if (curr_pfn >= end_pfn) continue; /* * ... and at the end of the usable range downwards: @@ -591,8 +629,8 @@ static __init void setup_bootmem_allocator(void) last_pfn = PFN_DOWN(bfin_memmap.map[i].addr + bfin_memmap.map[i].size); - if (last_pfn > max_pfn) - last_pfn = max_pfn; + if (last_pfn > end_pfn) + last_pfn = end_pfn; /* * .. finally, did all the rounding and playing @@ -611,9 +649,59 @@ static __init void setup_bootmem_allocator(void) BOOTMEM_DEFAULT); } +#define EBSZ_TO_MEG(ebsz) \ +({ \ + int meg = 0; \ + switch (ebsz & 0xf) { \ + case 0x1: meg = 16; break; \ + case 0x3: meg = 32; break; \ + case 0x5: meg = 64; break; \ + case 0x7: meg = 128; break; \ + case 0x9: meg = 256; break; \ + case 0xb: meg = 512; break; \ + } \ + meg; \ +}) +static inline int __init get_mem_size(void) +{ +#ifdef CONFIG_MEM_SIZE + return CONFIG_MEM_SIZE; +#else +# if defined(EBIU_SDBCTL) +# if defined(BF561_FAMILY) + int ret = 0; + u32 sdbctl = bfin_read_EBIU_SDBCTL(); + ret += EBSZ_TO_MEG(sdbctl >> 0); + ret += EBSZ_TO_MEG(sdbctl >> 8); + ret += EBSZ_TO_MEG(sdbctl >> 16); + ret += EBSZ_TO_MEG(sdbctl >> 24); + return ret; +# else + return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL()); +# endif +# elif defined(EBIU_DDRCTL1) + u32 ddrctl = bfin_read_EBIU_DDRCTL1(); + int ret = 0; + switch (ddrctl & 0xc0000) { + case DEVSZ_64: ret = 64 / 8; + case DEVSZ_128: ret = 128 / 8; + case DEVSZ_256: ret = 256 / 8; + case DEVSZ_512: ret = 512 / 8; + } + switch (ddrctl & 0x30000) { + case DEVWD_4: ret *= 2; + case DEVWD_8: ret *= 2; + case DEVWD_16: break; + } + return ret; +# endif +#endif + BUG(); +} + void __init setup_arch(char **cmdline_p) { - unsigned long l1_length, sclk, cclk; + unsigned long sclk, cclk; #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; @@ -631,7 +719,7 @@ void __init setup_arch(char **cmdline_p) /* setup memory defaults from the user config */ physical_mem_end = 0; - _ramend = CONFIG_MEM_SIZE * 1024 * 1024; + _ramend = get_mem_size() * 1024 * 1024; memset(&bfin_memmap, 0, sizeof(bfin_memmap)); @@ -712,15 +800,6 @@ void __init setup_arch(char **cmdline_p) paging_init(); - /* check the size of the l1 area */ - l1_length = _etext_l1 - _stext_l1; - if (l1_length > L1_CODE_LENGTH) - panic("L1 code memory overflow\n"); - - l1_length = _ebss_l1 - _sdata_l1; - if (l1_length > L1_DATA_A_LENGTH) - panic("L1 data memory overflow\n"); - /* Copy atomic sequences to their fixed location, and sanity check that these locations are the ones that we advertise to userspace. */ memcpy((void *)FIXED_CODE_START, &fixed_code_start, @@ -859,12 +938,17 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n" "cpu family\t: 0x%x\n" - "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK)\n" + "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n" "stepping\t: %d\n", 0, vendor, (bfin_read_CHIPID() & CHIPID_FAMILY), cpu, cclk/1000000, sclk/1000000, +#ifdef CONFIG_MPU + "mpu on", +#else + "mpu off", +#endif revid); seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", @@ -973,7 +1057,6 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "No Ways are locked\n"); } #endif - seq_printf(m, "board name\t: %s\n", bfin_board_name); seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index 5564c9588aa..d1fa24401dc 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -38,6 +38,7 @@ #include <asm/cacheflush.h> #include <asm/ucontext.h> +#include <asm/fixed_code.h> #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -50,18 +51,20 @@ struct rt_sigframe { int sig; struct siginfo *pinfo; void *puc; + /* This is no longer needed by the kernel, but unfortunately userspace + * code expects it to be there. */ char retcode[8]; struct siginfo info; struct ucontext uc; }; -asmlinkage int sys_sigaltstack(const stack_t * uss, stack_t * uoss) +asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) { return do_sigaltstack(uss, uoss, rdusp()); } static inline int -rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *pr0) +rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *pr0) { unsigned long usp = 0; int err = 0; @@ -159,11 +162,6 @@ static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *reg return err; } -static inline void push_cache(unsigned long vaddr, unsigned int len) -{ - flush_icache_range(vaddr, vaddr + len); -} - static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) { @@ -209,19 +207,9 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs); err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - /* Set up to return from userspace. */ - err |= __put_user(0x28, &(frame->retcode[0])); - err |= __put_user(0xe1, &(frame->retcode[1])); - err |= __put_user(0xad, &(frame->retcode[2])); - err |= __put_user(0x00, &(frame->retcode[3])); - err |= __put_user(0xa0, &(frame->retcode[4])); - err |= __put_user(0x00, &(frame->retcode[5])); - if (err) goto give_sigsegv; - push_cache((unsigned long)&frame->retcode, sizeof(frame->retcode)); - /* Set up registers for signal handler */ wrusp((unsigned long)frame); if (get_personality & FDPIC_FUNCPTRS) { @@ -231,7 +219,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, __get_user(regs->p3, &funcptr->GOT); } else regs->pc = (unsigned long)ka->sa.sa_handler; - regs->rets = (unsigned long)(frame->retcode); + regs->rets = SIGRETURN_STUB; regs->r0 = frame->sig; regs->r1 = (unsigned long)(&frame->info); diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index abcd14817d0..efb7b25a263 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -49,7 +49,7 @@ * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. */ -asmlinkage int sys_pipe(unsigned long *fildes) +asmlinkage int sys_pipe(unsigned long __user *fildes) { int fd[2]; int error; diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c new file mode 100644 index 00000000000..4482c47c09e --- /dev/null +++ b/arch/blackfin/kernel/time-ts.c @@ -0,0 +1,219 @@ +/* + * linux/arch/kernel/time-ts.c + * + * Based on arm clockevents implementation and old bfin time tick. + * + * Copyright(C) 2008, GeoTechnologies, Vitja Makarov + * + * This code is licenced under the GPL version 2. For details see + * kernel-base/COPYING. + */ +#include <linux/module.h> +#include <linux/profile.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/irq.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/cpufreq.h> + +#include <asm/blackfin.h> +#include <asm/time.h> + +#ifdef CONFIG_CYCLES_CLOCKSOURCE + +/* Accelerators for sched_clock() + * convert from cycles(64bits) => nanoseconds (64bits) + * basic equation: + * ns = cycles / (freq / ns_per_sec) + * ns = cycles * (ns_per_sec / freq) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) + * + * Then we use scaling math (suggested by george@mvista.com) to get: + * ns = cycles * (10^6 * SC / cpu_khz) / SC + * ns = cycles * cyc2ns_scale / SC + * + * And since SC is a constant power of two, we can convert the div + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better precision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * + * -johnstul@us.ibm.com "math is hard, lets go shopping!" + */ + +static unsigned long cyc2ns_scale; +#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ + +static inline void set_cyc2ns_scale(unsigned long cpu_khz) +{ + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz; +} + +static inline unsigned long long cycles_2_ns(cycle_t cyc) +{ + return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; +} + +static cycle_t read_cycles(void) +{ + return get_cycles(); +} + +unsigned long long sched_clock(void) +{ + return cycles_2_ns(read_cycles()); +} + +static struct clocksource clocksource_bfin = { + .name = "bfin_cycles", + .rating = 350, + .read = read_cycles, + .mask = CLOCKSOURCE_MASK(64), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init bfin_clocksource_init(void) +{ + set_cyc2ns_scale(get_cclk() / 1000); + + clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift); + + if (clocksource_register(&clocksource_bfin)) + panic("failed to register clocksource"); + + return 0; +} + +#else +# define bfin_clocksource_init() +#endif + +static int bfin_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + bfin_write_TCOUNT(cycles); + CSYNC(); + return 0; +} + +static void bfin_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: { + unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); + bfin_write_TCNTL(TMPWR); + bfin_write_TSCALE(TIME_SCALE - 1); + CSYNC(); + bfin_write_TPERIOD(tcount); + bfin_write_TCOUNT(tcount); + bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD); + CSYNC(); + break; + } + case CLOCK_EVT_MODE_ONESHOT: + bfin_write_TSCALE(0); + bfin_write_TCOUNT(0); + bfin_write_TCNTL(TMPWR | TMREN); + CSYNC(); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + bfin_write_TCNTL(0); + CSYNC(); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static void __init bfin_timer_init(void) +{ + /* power up the timer, but don't enable it just yet */ + bfin_write_TCNTL(TMPWR); + CSYNC(); + + /* + * the TSCALE prescaler counter. + */ + bfin_write_TSCALE(TIME_SCALE - 1); + bfin_write_TPERIOD(0); + bfin_write_TCOUNT(0); + + /* now enable the timer */ + CSYNC(); +} + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ +#ifdef CONFIG_CORE_TIMER_IRQ_L1 +__attribute__((l1_text)) +#endif +irqreturn_t timer_interrupt(int irq, void *dev_id); + +static struct clock_event_device clockevent_bfin = { + .name = "bfin_core_timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .cpumask = CPU_MASK_CPU0, + .set_next_event = bfin_timer_set_next_event, + .set_mode = bfin_timer_set_mode, +}; + +static struct irqaction bfin_timer_irq = { + .name = "Blackfin Core Timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = timer_interrupt, + .dev_id = &clockevent_bfin, +}; + +irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static int __init bfin_clockevent_init(void) +{ + setup_irq(IRQ_CORETMR, &bfin_timer_irq); + bfin_timer_init(); + + clockevent_bfin.mult = div_sc(get_cclk(), NSEC_PER_SEC, clockevent_bfin.shift); + clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin); + clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin); + clockevents_register_device(&clockevent_bfin); + + return 0; +} + +void __init time_init(void) +{ + time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */ + +#ifdef CONFIG_RTC_DRV_BFIN + /* [#2663] hack to filter junk RTC values that would cause + * userspace to have to deal with time values greater than + * 2^31 seconds (which uClibc cannot cope with yet) + */ + if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) { + printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n"); + bfin_write_RTC_STAT(0); + } +#endif + + /* Initialize xtime. From now on, xtime is updated with timer interrupts */ + xtime.tv_sec = secs_since_1970; + xtime.tv_nsec = 0; + set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); + + bfin_clocksource_init(); + bfin_clockevent_init(); +} diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 715b3945e4c..eb235232045 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -6,9 +6,10 @@ * Created: * Description: This file contains the bfin-specific time handling details. * Most of the stuff is located in the machine specific files. + * FIXME: (This file is subject for removal) * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -35,6 +36,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> +#include <asm/time.h> /* This is an NTP setting */ #define TICK_SIZE (tick_nsec / 1000) @@ -47,21 +49,6 @@ static struct irqaction bfin_timer_irq = { .flags = IRQF_DISABLED }; -/* - * The way that the Blackfin core timer works is: - * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE) - * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT) - * - * If you take the fastest clock (1ns, or 1GHz to make the math work easier) - * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter - * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need - * to use TSCALE, and program it to zero (which is pass CCLK through). - * If you feel like using it, try to keep HZ * TIMESCALE to some - * value that divides easy (like power of 2). - */ - -#define TIME_SCALE 1 - static void time_sched_init(irq_handler_t timer_routine) { diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 56a67ab698c..5b847070dae 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -67,6 +67,8 @@ void __init trap_init(void) CSYNC(); } +void *saved_icplb_fault_addr, *saved_dcplb_fault_addr; + int kstack_depth_to_print = 48; static void decode_address(char *buf, unsigned long address) @@ -75,7 +77,7 @@ static void decode_address(char *buf, unsigned long address) struct task_struct *p; struct mm_struct *mm; unsigned long flags, offset; - unsigned int in_exception = bfin_read_IPEND() & 0x10; + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); #ifdef CONFIG_KALLSYMS unsigned long symsize; @@ -117,7 +119,7 @@ static void decode_address(char *buf, unsigned long address) */ write_lock_irqsave(&tasklist_lock, flags); for_each_process(p) { - mm = (in_exception ? p->mm : get_task_mm(p)); + mm = (in_atomic ? p->mm : get_task_mm(p)); if (!mm) continue; @@ -137,23 +139,36 @@ static void decode_address(char *buf, unsigned long address) /* FLAT does not have its text aligned to the start of * the map while FDPIC ELF does ... */ - if (current->mm && - (address > current->mm->start_code) && - (address < current->mm->end_code)) - offset = address - current->mm->start_code; - else - offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); - - sprintf(buf, "<0x%p> [ %s + 0x%lx ]", - (void *)address, name, offset); - if (!in_exception) + + /* before we can check flat/fdpic, we need to + * make sure current is valid + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3)) { + if (current->mm && + (address > current->mm->start_code) && + (address < current->mm->end_code)) + offset = address - current->mm->start_code; + else + offset = (address - vma->vm_start) + + (vma->vm_pgoff << PAGE_SHIFT); + + sprintf(buf, "<0x%p> [ %s + 0x%lx ]", + (void *)address, name, offset); + } else + sprintf(buf, "<0x%p> [ %s vma:0x%lx-0x%lx]", + (void *)address, name, + vma->vm_start, vma->vm_end); + + if (!in_atomic) mmput(mm); + goto done; } vml = vml->next; } - if (!in_exception) + if (!in_atomic) mmput(mm); } @@ -506,7 +521,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_signo = sig; info.si_errno = 0; - info.si_addr = (void *)fp->pc; + info.si_addr = (void __user *)fp->pc; force_sig_info(sig, &info, current); trace_buffer_restore(j); @@ -655,21 +670,31 @@ void dump_bfin_process(struct pt_regs *fp) else if (context & 0x8000) printk(KERN_NOTICE "Kernel process context\n"); - if (current->pid && current->mm) { + /* Because we are crashing, and pointers could be bad, we check things + * pretty closely before we use them + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3) && current->pid) { printk(KERN_NOTICE "CURRENT PROCESS:\n"); - printk(KERN_NOTICE "COMM=%s PID=%d\n", - current->comm, current->pid); - - printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_NOTICE "\n", - (void *)current->mm->start_code, - (void *)current->mm->end_code, - (void *)current->mm->start_data, - (void *)current->mm->end_data, - (void *)current->mm->end_data, - (void *)current->mm->brk, - (void *)current->mm->start_stack); + if (current->comm >= (char *)FIXED_CODE_START) + printk(KERN_NOTICE "COMM=%s PID=%d\n", + current->comm, current->pid); + else + printk(KERN_NOTICE "COMM= invalid\n"); + + if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) + printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" + KERN_NOTICE "\n", + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data, + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); + else + printk(KERN_NOTICE "invalid mm\n"); } else printk(KERN_NOTICE "\n" KERN_NOTICE "No Valid process in current context\n"); @@ -680,10 +705,7 @@ void dump_bfin_mem(struct pt_regs *fp) unsigned short *addr, *erraddr, val = 0, err = 0; char sti = 0, buf[6]; - if (unlikely((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)) - erraddr = (void *)fp->pc; - else - erraddr = (void *)fp->retx; + erraddr = (void *)fp->pc; printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr); @@ -807,9 +829,9 @@ unlock: if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { - decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); + decode_address(buf, saved_dcplb_fault_addr); printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); - decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); + decode_address(buf, saved_icplb_fault_addr); printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); } @@ -917,8 +939,8 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) oops_in_progress = 1; - printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); - printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); + printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr); + printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr); dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index cb01a9de268..3ecc64cab3b 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -56,6 +56,10 @@ SECTIONS *(.text.*) *(.fixup) +#if !L1_CODE_LENGTH + *(.l1.text) +#endif + . = ALIGN(16); ___start___ex_table = .; *(__ex_table) @@ -73,6 +77,12 @@ SECTIONS ___bss_start = .; *(.bss .bss.*) *(COMMON) +#if !L1_DATA_A_LENGTH + *(.l1.bss) +#endif +#if !L1_DATA_B_LENGTH + *(.l1.bss.B) +#endif ___bss_stop = .; } @@ -83,6 +93,15 @@ SECTIONS . = ALIGN(32); *(.data.cacheline_aligned) +#if !L1_DATA_A_LENGTH + . = ALIGN(32); + *(.data_l1.cacheline_aligned) + *(.l1.data) +#endif +#if !L1_DATA_B_LENGTH + *(.l1.data.B) +#endif + DATA_DATA *(.data.*) CONSTRUCTORS @@ -147,64 +166,43 @@ SECTIONS __l1_lma_start = .; -#if L1_CODE_LENGTH -# define LDS_L1_CODE *(.l1.text) -#else -# define LDS_L1_CODE -#endif .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs)) { . = ALIGN(4); __stext_l1 = .; - LDS_L1_CODE + *(.l1.text) . = ALIGN(4); __etext_l1 = .; } -#if L1_DATA_A_LENGTH -# define LDS_L1_A_DATA *(.l1.data) -# define LDS_L1_A_BSS *(.l1.bss) -# define LDS_L1_A_CACHE *(.data_l1.cacheline_aligned) -#else -# define LDS_L1_A_DATA -# define LDS_L1_A_BSS -# define LDS_L1_A_CACHE -#endif .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1)) { . = ALIGN(4); __sdata_l1 = .; - LDS_L1_A_DATA + *(.l1.data) __edata_l1 = .; . = ALIGN(4); __sbss_l1 = .; - LDS_L1_A_BSS + *(.l1.bss) . = ALIGN(32); - LDS_L1_A_CACHE + *(.data_l1.cacheline_aligned) . = ALIGN(4); __ebss_l1 = .; } -#if L1_DATA_B_LENGTH -# define LDS_L1_B_DATA *(.l1.data.B) -# define LDS_L1_B_BSS *(.l1.bss.B) -#else -# define LDS_L1_B_DATA -# define LDS_L1_B_BSS -#endif .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1)) { . = ALIGN(4); __sdata_b_l1 = .; - LDS_L1_B_DATA + *(.l1.data.B) __edata_b_l1 = .; . = ALIGN(4); __sbss_b_l1 = .; - LDS_L1_B_BSS + *(.l1.bss.B) . = ALIGN(4); __ebss_b_l1 = .; @@ -223,8 +221,6 @@ SECTIONS DWARF_DEBUG - NOTES - /DISCARD/ : { EXIT_TEXT diff --git a/arch/blackfin/mach-bf527/Makefile b/arch/blackfin/mach-bf527/Makefile index 9f99f5d0bcd..4eddb580319 100644 --- a/arch/blackfin/mach-bf527/Makefile +++ b/arch/blackfin/mach-bf527/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index cf4bc0d8335..583d53811f0 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -94,7 +94,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -416,7 +416,7 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", - .size = 0x00020000, + .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { @@ -707,6 +707,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -874,6 +900,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -896,7 +926,7 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf527/cpu.c b/arch/blackfin/mach-bf527/cpu.c deleted file mode 100644 index 1975402b1db..00000000000 --- a/arch/blackfin/mach-bf527/cpu.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * File: arch/blackfin/mach-bf527/cpu.c - * Based on: arch/blackfin/mach-bf537/cpu.c - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf527 - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define MFREQ(x) {VCO(x), VCO(x)/4}, {VCO(x), VCO(x)/2}, {VCO(x), VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf527_freq_table[] = { - MFREQ(1), - MFREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - MFREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf527_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - - return cclk_mhz; -} - -static int bf527_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target - (policy, bf527_freq_table, target_freq, relation, &index)) - return -EINVAL; - - cclk_mhz = bf527_freq_table[index].frequency; - vco_mhz = bf527_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf527_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug - ("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf527_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf527_freq_table); -} - -static int __init __bf527_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf527_getfreq(0); - cpufreq_frequency_table_get_attr(bf527_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf527_freq_table); -} - -static struct freq_attr *bf527_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf527_driver = { - .verify = bf527_verify_speed, - .target = bf527_target, - .get = bf527_getfreq, - .init = __bf527_cpu_init, - .name = "bf527", - .owner = THIS_MODULE, - .attr = bf527_freq_attr, -}; - -static int __init bf527_cpu_init(void) -{ - return cpufreq_register_driver(&bf527_driver); -} - -static void __exit bf527_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf527_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for bf527 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf527_cpu_init); -module_exit(bf527_cpu_exit); diff --git a/arch/blackfin/mach-bf527/dma.c b/arch/blackfin/mach-bf527/dma.c index 522de24cc39..dfd080cda78 100644 --- a/arch/blackfin/mach-bf527/dma.c +++ b/arch/blackfin/mach-bf527/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -47,6 +49,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index cdb00a08496..57bdb3ba2fe 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -37,9 +37,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -439,18 +436,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile index 8cce1736360..aa9f2647ee0 100644 --- a/arch/blackfin/mach-bf533/Makefile +++ b/arch/blackfin/mach-bf533/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 97378b0a975..7cc4864f6aa 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -304,6 +304,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) #include <linux/serial_8250.h> @@ -403,6 +422,10 @@ static struct platform_device *h8606_devices[] __initdata = { &serial8250_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) &opencores_kbd_device, #endif @@ -411,7 +434,7 @@ static struct platform_device *h8606_devices[] __initdata = { static int __init H8606_init(void) { printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 751de5110af..840059241fb 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -26,6 +26,12 @@ config H8606_HVSISTEMAS help HV Sistemas H8606 board support. +config BFIN532_IP0X + bool "IP04/IP08 IP-PBX" + depends on (BF532) + help + Core support for IP04/IP04 open hardware IP-PBX. + config GENERIC_BF533_BOARD bool "Generic" help diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 54f57fb9791..b7a1a1d79bd 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o +obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 886f260d935..a03149c7268 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -234,6 +234,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -327,6 +346,10 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, @@ -355,7 +378,7 @@ static struct platform_device *cm_bf533_devices[] __initdata = { static int __init cm_bf533_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 241b5a20a36..08a7943949a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -237,6 +237,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define PATA_INT 55 @@ -352,6 +371,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif @@ -369,7 +392,7 @@ static struct platform_device *ezkit_devices[] __initdata = { static int __init ezkit_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index e359a0d6467..82b1f6a60e3 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -84,7 +84,7 @@ static struct platform_device *generic_board_devices[] __initdata = { static int __init generic_board_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); } diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c new file mode 100644 index 00000000000..5864892de31 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -0,0 +1,303 @@ +/* + * File: arch/blackfin/mach-bf533/ip0x.c + * Based on: arch/blackfin/mach-bf533/bf1.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Ivan Danov <idanov@gmail.com> + * Modified for IP0X David Rowe + * + * Created: 2007 + * Description: Board info file for the IP04/IP08 boards, which + * are derived from the BlackfinOne V2.0 boards. + * + * Modified: + * COpyright 2007 David Rowe + * Copyright 2006 Intratrade Ltd. + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb/isp1362.h> +#endif +#include <asm/irq.h> +#include <asm/bfin5xx_spi.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "IP04/IP08"; + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + +#include <linux/dm9000.h> + +static struct resource dm9000_resource1[] = { + { + .start = 0x20100000, + .end = 0x20100000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20100000 + 2, + .end = 0x20100000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF15, + .end = IRQ_PF15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +static struct resource dm9000_resource2[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 1, + .flags = IORESOURCE_MEM + },{ + .start = 0x20200000 + 2, + .end = 0x20200000 + 3, + .flags = IORESOURCE_MEM + },{ + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +/* +* for the moment we limit ourselves to 16bit IO until some +* better IO routines can be written and tested +*/ +static struct dm9000_plat_data dm9000_platdata1 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device1 = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000_resource1), + .resource = dm9000_resource1, + .dev = { + .platform_data = &dm9000_platdata1, + } +}; + +static struct dm9000_plat_data dm9000_platdata2 = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device dm9000_device2 = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(dm9000_resource2), + .resource = dm9000_resource2, + .dev = { + .platform_data = &dm9000_platdata2, + } +}; + +#endif +#endif + + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { +/* + * CPOL (Clock Polarity) + * 0 - Active high SCK + * 1 - Active low SCK + * CPHA (Clock Phase) Selects transfer format and operation mode + * 0 - SCLK toggles from middle of the first data bit, slave select + * pins controlled by hardware. + * 1 - SCLK toggles from beginning of first data bit, slave select + * pins controller by user software. + * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work + * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0 + * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1 + */ + .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ + .enable_dma = 0, /* if 1 - block!!! */ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +/* Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate */ +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc", + .max_speed_hz = 2, + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 1, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20300000 + 2, + .end = 0x20300000 + 3, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF11, + .end = IRQ_PF11, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, /* external OC */ + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + + +static struct platform_device *ip0x_devices[] __initdata = { +#if defined(CONFIG_BFIN532_IP0X) +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device1, + &dm9000_device2, +#endif +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif +}; + +static int __init ip0x_init(void) +{ + int i; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) { + int j = 1 << bfin_spi_board_info[i].chip_select; + /* set spi cs to 1 */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j); + bfin_write_FIO_FLAG_S(j); + } + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(ip0x_init); diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index b2ac4816ae6..fddce32901a 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -40,6 +40,7 @@ #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/i2c.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -109,6 +110,7 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -152,6 +154,7 @@ static struct platform_device stamp_flash_device = { .num_resources = ARRAY_SIZE(stamp_flash_resource), .resource = stamp_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -367,6 +370,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -472,6 +494,31 @@ static struct platform_device i2c_gpio_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) + { + I2C_BOARD_INFO("ad7142_joystick", 0x2C), + .type = "ad7142_joystick", + .irq = 39, + }, +#endif +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 39, + }, +#endif +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -497,6 +544,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, @@ -515,14 +566,23 @@ static struct platform_device *stamp_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) &stamp_flash_device, +#endif }; static int __init stamp_init(void) { int ret; - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) return ret; diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c deleted file mode 100644 index b7a0e0fbd9a..00000000000 --- a/arch/blackfin/mach-bf533/cpu.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * File: arch/blackfin/mach-bf533/cpu.c - * Based on: - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf533 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf533_freq_table[] = { - FREQ(1), - FREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - FREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf533_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz, vco_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - return cclk_mhz; -} - -static int bf533_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index, vco_index; - int i; - - struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index)) - return -EINVAL; - cclk_mhz = bf533_freq_table[index].frequency; - vco_mhz = bf533_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf533_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf533_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf533_freq_table); -} - -static int __init __bf533_cpu_init(struct cpufreq_policy *policy) -{ - int result; - - if (policy->cpu != 0) - return -EINVAL; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf533_getfreq(0); - cpufreq_frequency_table_get_attr(bf533_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf533_freq_table); -} - -static struct freq_attr *bf533_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf533_driver = { - .verify = bf533_verify_speed, - .target = bf533_target, - .get = bf533_getfreq, - .init = __bf533_cpu_init, - .name = "bf533", - .owner = THIS_MODULE, - .attr = bf533_freq_attr, -}; - -static int __init bf533_cpu_init(void) -{ - return cpufreq_register_driver(&bf533_driver); -} - -static void __exit bf533_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf533_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF533 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf533_cpu_init); -module_exit(bf533_cpu_exit); diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c index 6c909cf4f7b..28655c1cb7d 100644 --- a/arch/blackfin/mach-bf533/dma.c +++ b/arch/blackfin/mach-bf533/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -43,6 +45,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 1ded945a6fa..1295deac00a 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -36,9 +36,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -151,26 +148,26 @@ ENTRY(__start) /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; @@ -431,18 +428,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile index 7e7c9c8ac5b..68e5478e95a 100644 --- a/arch/blackfin/mach-bf537/Makefile +++ b/arch/blackfin/mach-bf537/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index f7c1f964f13..d8a23cd9b9e 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -325,6 +325,54 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -393,6 +441,14 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, @@ -425,7 +481,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { static int __init cm_bf537_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index c95395ba7bf..7d250828dad 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -90,7 +90,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -554,6 +554,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -674,6 +700,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -690,7 +720,7 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index d71e0be3392..18ddf7a5200 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -8,12 +8,12 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/usb_sl811.h> +#include <linux/usb/sl811.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -225,6 +225,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -284,6 +310,10 @@ static struct platform_device *minotaur_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -297,7 +327,7 @@ static struct platform_device *minotaur_devices[] __initdata = { static int __init minotaur_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 509a8a236fd..51c3bab14a6 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -452,6 +452,31 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) @@ -493,11 +518,15 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif }; static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ea83148993d..0cec14b1ef5 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -41,6 +41,7 @@ #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/i2c.h> #include <linux/usb/sl811.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -90,7 +91,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -353,6 +354,7 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -395,6 +397,7 @@ static struct platform_device stamp_flash_device = { .num_resources = 1, .resource = &stamp_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -500,6 +503,15 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif +#if defined(CONFIG_MTD_DATAFLASH) \ + || defined(CONFIG_MTD_DATAFLASH_MODULE) +/* DataFlash chip */ +static struct bfin5xx_spi_chip data_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -514,7 +526,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif - +#if defined(CONFIG_MTD_DATAFLASH) \ + || defined(CONFIG_MTD_DATAFLASH_MODULE) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .controller_data = &data_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif #if defined(CONFIG_SPI_ADC_BF533) \ || defined(CONFIG_SPI_ADC_BF533_MODULE) { @@ -676,6 +698,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -698,6 +746,31 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) + { + I2C_BOARD_INFO("ad7142_joystick", 0x2C), + .type = "ad7142_joystick", + .irq = 55, + }, +#endif +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 72, + }, +#endif +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -800,6 +873,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -818,12 +895,21 @@ static struct platform_device *stamp_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &stamp_flash_device, +#endif }; static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, @@ -833,6 +919,7 @@ static int __init stamp_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif + return 0; } diff --git a/arch/blackfin/mach-bf537/cpu.c b/arch/blackfin/mach-bf537/cpu.c deleted file mode 100644 index 0442c4c7f72..00000000000 --- a/arch/blackfin/mach-bf537/cpu.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * File: arch/blackfin/mach-bf537/cpu.c - * Based on: - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf537 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf537_freq_table[] = { - MFREQ(1), - MFREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - MFREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf537_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - - return cclk_mhz; -} - -static int bf537_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, bf537_freq_table, target_freq, relation, &index)) - return -EINVAL; - - cclk_mhz = bf537_freq_table[index].frequency; - vco_mhz = bf537_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf537_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf537_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf537_freq_table); -} - -static int __init __bf537_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf537_getfreq(0); - cpufreq_frequency_table_get_attr(bf537_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf537_freq_table); -} - -static struct freq_attr *bf537_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf537_driver = { - .verify = bf537_verify_speed, - .target = bf537_target, - .get = bf537_getfreq, - .init = __bf537_cpu_init, - .name = "bf537", - .owner = THIS_MODULE, - .attr = bf537_freq_attr, -}; - -static int __init bf537_cpu_init(void) -{ - return cpufreq_register_driver(&bf537_driver); -} - -static void __exit bf537_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf537_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF537 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf537_cpu_init); -module_exit(bf537_cpu_exit); diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c index 706cb97b026..4edb363ff99 100644 --- a/arch/blackfin/mach-bf537/dma.c +++ b/arch/blackfin/mach-bf537/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -47,6 +49,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 3014fe8dd15..48cd58a410a 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -37,9 +37,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -180,40 +177,28 @@ ENTRY(__start) SSYNC; #endif -#ifdef CONFIG_BF537_PORT_H - p0.h = hi(PORTH_FER); - p0.l = lo(PORTH_FER); - R0.L = W[P0]; /* Read */ - SSYNC; - R0 = 0x0000; - W[P0] = R0.L; /* Write */ - SSYNC; - W[P0] = R0.L; /* Disable peripheral function of PORTH */ - SSYNC; -#endif - /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; @@ -483,18 +468,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile index 7e7c9c8ac5b..68e5478e95a 100644 --- a/arch/blackfin/mach-bf548/Makefile +++ b/arch/blackfin/mach-bf548/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf548/boards/Kconfig b/arch/blackfin/mach-bf548/boards/Kconfig index 05712906403..d38e5267185 100644 --- a/arch/blackfin/mach-bf548/boards/Kconfig +++ b/arch/blackfin/mach-bf548/boards/Kconfig @@ -8,5 +8,11 @@ config BFIN548_EZKIT bool "BF548-EZKIT" help BFIN548-EZKIT board support. + +config BFIN548_BLUETECHNIX_CM + bool "Bluetechnix CM-BF548" + depends on (BF548) + help + CM-BF548 support for DEV-Board. endchoice diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile index a444cc73957..eed161dd784 100644 --- a/arch/blackfin/mach-bf548/boards/Makefile +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o +obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c new file mode 100644 index 00000000000..e3e8479fffb --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -0,0 +1,664 @@ +/* + * File: arch/blackfin/mach-bf548/boards/cm_bf548.c + * Based on: arch/blackfin/mach-bf537/boards/ezkit.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb/musb.h> +#include <asm/bfin5xx_spi.h> +#include <asm/cplb.h> +#include <asm/dma.h> +#include <asm/gpio.h> +#include <asm/nand.h> +#include <asm/portmux.h> +#include <asm/mach/bf54x_keys.h> +#include <linux/input.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix CM-BF548"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + +#include <asm/mach/bf54x-lq043.h> + +static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { + .width = 480, + .height = 272, + .xres = {480, 480, 480}, + .yres = {272, 272, 272}, + .bpp = {24, 24, 24}, + .disp = GPIO_PE3, +}; + +static struct resource bf54x_lq043_resources[] = { + { + .start = IRQ_EPPI0_ERR, + .end = IRQ_EPPI0_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_lq043_device = { + .name = "bf54x-lq043", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_lq043_resources), + .resource = bf54x_lq043_resources, + .dev = { + .platform_data = &bf54x_lq043_data, + }, +}; +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +static unsigned int bf548_keymap[] = { + KEYVAL(0, 0, KEY_ENTER), + KEYVAL(0, 1, KEY_HELP), + KEYVAL(0, 2, KEY_0), + KEYVAL(0, 3, KEY_BACKSPACE), + KEYVAL(1, 0, KEY_TAB), + KEYVAL(1, 1, KEY_9), + KEYVAL(1, 2, KEY_8), + KEYVAL(1, 3, KEY_7), + KEYVAL(2, 0, KEY_DOWN), + KEYVAL(2, 1, KEY_6), + KEYVAL(2, 2, KEY_5), + KEYVAL(2, 3, KEY_4), + KEYVAL(3, 0, KEY_UP), + KEYVAL(3, 1, KEY_3), + KEYVAL(3, 2, KEY_2), + KEYVAL(3, 3, KEY_1), +}; + +static struct bfin_kpad_platform_data bf54x_kpad_data = { + .rows = 4, + .cols = 4, + .keymap = bf548_keymap, + .keymapsize = ARRAY_SIZE(bf548_keymap), + .repeat = 0, + .debounce_time = 5000, /* ns (5ms) */ + .coldrive_time = 1000, /* ns (1ms) */ + .keyup_test_interval = 50, /* ms (50ms) */ +}; + +static struct resource bf54x_kpad_resources[] = { + { + .start = IRQ_KEY, + .end = IRQ_KEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_kpad_device = { + .name = "bf54x-keys", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_kpad_resources), + .resource = bf54x_kpad_resources, + .dev = { + .platform_data = &bf54x_kpad_data, + }, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x24000000, + .end = 0x24000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE6, + .end = IRQ_PE6, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 0, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +static struct resource bfin_atapi_resources[] = { + { + .start = 0xFFC03800, + .end = 0xFFC0386F, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ATAPI_ERR, + .end = IRQ_ATAPI_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_atapi_device = { + .name = "pata-bf54x", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_atapi_resources), + .resource = bfin_atapi_resources, +}; +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = 4 * SIZE_1M, + .size = (256 - 4) * SIZE_1M, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = 0xFFC03B00, + .end = 0xFFC03B4F, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +static struct platform_device bf54x_sdh_device = { + .name = "bfin-sdh", + .id = 0, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +/* SPI flash chip (m25p16) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel", + .size = 0x1c0000, + .offset = 0x40000 + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .cs_change_per_word = 0, + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bf54x_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +{ + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PJ11, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, +}, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bf54x_spi_master_info0 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bf54x_spi_master0 = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf54x_spi_master_info0, /* Passed to driver */ + }, +}; + +static struct bfin5xx_spi_master bf54x_spi_master_info1 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + +static struct platform_device bf54x_spi_master1 = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf54x_spi_master_info1, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; + +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_REGBASE, + .end = TWI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, +}; +#endif +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct platform_device *cm_bf548_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + &bf54x_lq043_device, +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + &smsc911x_device, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) + &bfin_atapi_device, +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + &bf54x_sdh_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bf54x_spi_master0, + &bf54x_spi_master1, +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) + &bf54x_kpad_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +/* &i2c_bfin_twi0_device, */ +#if !defined(CONFIG_BF542) + &i2c_bfin_twi1_device, +#endif +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif +}; + +static int __init cm_bf548_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bf54x_spi_board_info, + ARRAY_SIZE(bf54x_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(cm_bf548_init); diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 40846aa034c..231dfbd3bc1 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -36,6 +36,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> +#include <linux/i2c.h> #include <linux/interrupt.h> #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) #include <linux/usb/musb.h> @@ -187,6 +188,46 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR2 + { + .start = 0xFFC02100, + .end = 0xFFC021FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR3 + { + .start = 0xFFC03100, + .end = 0xFFC031FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) static struct resource smsc911x_resources[] = { { @@ -330,6 +371,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", @@ -337,7 +379,7 @@ static struct mtd_partition ezkit_partitions[] = { .offset = 0, }, { .name = "Kernel", - .size = 0xE0000, + .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { .name = "RootFS", @@ -367,6 +409,7 @@ static struct platform_device ezkit_flash_device = { .num_resources = 1, .resource = &ezkit_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -400,6 +443,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .cs_change_per_word = 0, @@ -443,6 +494,16 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", @@ -571,6 +632,29 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { +}; + +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 212, + }, +#endif +}; +#endif +#endif + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/gpio_keys.h> @@ -616,6 +700,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) &bf54x_lq043_device, #endif @@ -661,12 +749,25 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, +#endif }; static int __init ezkit_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info0, + ARRAY_SIZE(bfin_i2c_board_info0)); +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ + i2c_register_board_info(1, bfin_i2c_board_info1, + ARRAY_SIZE(bfin_i2c_board_info1)); +#endif +#endif + platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) diff --git a/arch/blackfin/mach-bf548/cpu.c b/arch/blackfin/mach-bf548/cpu.c deleted file mode 100644 index 4298a3ccfbf..00000000000 --- a/arch/blackfin/mach-bf548/cpu.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * File: arch/blackfin/mach-bf548/cpu.c - * Based on: - * Author: - * - * Created: - * Description: clock scaling for the bf54x - * - * Modified: - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=25000000 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) -#define VCO4 (CONFIG_CLKIN_HZ*36) -#define VCO3 (CONFIG_CLKIN_HZ*27) -#define VCO2 (CONFIG_CLKIN_HZ*18) -#define VCO1 (CONFIG_CLKIN_HZ*9) -#define VCO(x) VCO##x - -#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf548_freq_table[] = { - MFREQ(1), - MFREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - MFREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf548_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - - return cclk_mhz; -} - -static int bf548_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, bf548_freq_table, target_freq, relation, &index)) - return -EINVAL; - - cclk_mhz = bf548_freq_table[index].frequency; - vco_mhz = bf548_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf548_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf548_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf548_freq_table); -} - -static int __init __bf548_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf548_getfreq(0); - cpufreq_frequency_table_get_attr(bf548_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf548_freq_table); -} - -static struct freq_attr *bf548_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf548_driver = { - .verify = bf548_verify_speed, - .target = bf548_target, - .get = bf548_getfreq, - .init = __bf548_cpu_init, - .name = "bf548", - .owner = THIS_MODULE, - .attr = bf548_freq_attr, -}; - -static int __init bf548_cpu_init(void) -{ - return cpufreq_register_driver(&bf548_driver); -} - -static void __exit bf548_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf548_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF548 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf548_cpu_init); -module_exit(bf548_cpu_exit); diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c index f5479298bb7..74730eb8ae1 100644 --- a/arch/blackfin/mach-bf548/dma.c +++ b/arch/blackfin/mach-bf548/dma.c @@ -32,7 +32,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> - struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -66,7 +66,7 @@ (struct dma_register *) MDMA_D3_NEXT_DESC_PTR, (struct dma_register *) MDMA_S3_NEXT_DESC_PTR, }; -EXPORT_SYMBOL(base_addr); +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 46222a75321..f7191141a3c 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -36,9 +36,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -456,18 +453,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index bf9e738a7c6..9fd580952fd 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -283,6 +283,25 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define PATA_INT 119 @@ -330,6 +349,10 @@ static struct platform_device *cm_bf561_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, #endif @@ -349,7 +372,7 @@ static struct platform_device *cm_bf561_devices[] __initdata = { static int __init cm_bf561_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index d357f648d96..0d74b7d9920 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -78,7 +78,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -220,6 +220,26 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", @@ -227,7 +247,7 @@ static struct mtd_partition ezkit_partitions[] = { .offset = 0, }, { .name = "Kernel", - .size = 0xE0000, + .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { .name = "RootFS", @@ -257,6 +277,7 @@ static struct platform_device ezkit_flash_device = { .num_resources = 1, .resource = &ezkit_flash_resource, }; +#endif #ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ @@ -443,6 +464,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif @@ -460,7 +485,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c index fc80c5d059f..2faa0072d61 100644 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ b/arch/blackfin/mach-bf561/boards/generic_board.c @@ -70,7 +70,7 @@ static struct platform_device *generic_board_devices[] __initdata = { static int __init generic_board_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); } diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index ec6a2207c20..c9174b39f98 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -50,7 +50,7 @@ static struct platform_device *tepla_devices[] __initdata = { static int __init tepla_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices)); } diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c index 89c65bb0bed..24415eb8269 100644 --- a/arch/blackfin/mach-bf561/dma.c +++ b/arch/blackfin/mach-bf561/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA1_0_NEXT_DESC_PTR, (struct dma_register *) DMA1_1_NEXT_DESC_PTR, (struct dma_register *) DMA1_2_NEXT_DESC_PTR, @@ -67,6 +69,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR, (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 96a3d456fb6..5b8bd40851d 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -37,9 +37,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -139,26 +136,26 @@ ENTRY(__start) /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; @@ -411,18 +408,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 15e33ca1ce8..393081e9b68 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -6,4 +6,5 @@ obj-y := \ cache.o cacheinit.o entry.o \ interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o -obj-$(CONFIG_PM) += pm.o dpmc.o +obj-$(CONFIG_PM) += pm.o dpmc.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 2f6ce397780..caaab49e9cf 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -54,7 +54,8 @@ #endif /* CONFIG_BFIN_KERNEL_CLOCK */ +#ifdef CONFIG_MEM_SIZE #if (CONFIG_MEM_SIZE % 4) #error "SDRAM mem size must be multible of 4MB" #endif - +#endif diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c new file mode 100644 index 00000000000..ed81e00d20e --- /dev/null +++ b/arch/blackfin/mach-common/cpufreq.c @@ -0,0 +1,194 @@ +/* + * File: arch/blackfin/mach-common/cpufreq.c + * Based on: + * Author: + * + * Created: + * Description: Blackfin core clock scaling + * + * Modified: + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/fs.h> +#include <asm/blackfin.h> +#include <asm/time.h> + + +/* this is the table of CCLK frequencies, in Hz */ +/* .index is the entry in the auxillary dpm_state_table[] */ +static struct cpufreq_frequency_table bfin_freq_table[] = { + { + .frequency = CPUFREQ_TABLE_END, + .index = 0, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 1, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 2, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 0, + }, +}; + +static struct bfin_dpm_state { + unsigned int csel; /* system clock divider */ + unsigned int tscale; /* change the divider on the core timer interrupt */ +} dpm_state_table[3]; + +/**************************************************************************/ + +static unsigned int bfin_getfreq(unsigned int cpu) +{ + /* The driver only support single cpu */ + if (cpu != 0) + return -1; + + return get_cclk(); +} + + +static int bfin_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int index, plldiv, tscale; + unsigned long flags, cclk_hz; + struct cpufreq_freqs freqs; + + if (cpufreq_frequency_table_target(policy, bfin_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + cclk_hz = bfin_freq_table[index].frequency; + + freqs.old = bfin_getfreq(0); + freqs.new = cclk_hz; + freqs.cpu = 0; + + pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", + cclk_hz, target_freq, freqs.old); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + local_irq_save(flags); + plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; + tscale = dpm_state_table[index].tscale; + bfin_write_PLL_DIV(plldiv); + /* we have to adjust the core timer, because it is using cclk */ + bfin_write_TSCALE(tscale); + SSYNC(); + local_irq_restore(flags); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int bfin_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, bfin_freq_table); +} + +static int __init __bfin_cpu_init(struct cpufreq_policy *policy) +{ + + unsigned long cclk, sclk, csel, min_cclk; + int index; + +#ifdef CONFIG_CYCLES_CLOCKSOURCE +/* + * Clocksource CYCLES is still CONTINUOUS but not longer MONOTONIC in case we enable + * CPU frequency scaling, since CYCLES runs off Core Clock. + */ + printk(KERN_WARNING "CPU frequency scaling not supported: Clocksource not suitable\n" + return -ENODEV; +#endif + + if (policy->cpu != 0) + return -EINVAL; + + cclk = get_cclk(); + sclk = get_sclk(); + +#if ANOMALY_05000273 + min_cclk = sclk * 2; +#else + min_cclk = sclk; +#endif + csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); + + for (index = 0; (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) { + bfin_freq_table[index].frequency = cclk >> index; + dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ + dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; + + pr_debug("cpufreq: freq:%d csel:%d tscale:%d\n", + bfin_freq_table[index].frequency, + dpm_state_table[index].csel, + dpm_state_table[index].tscale); + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000; + /*Now ,only support one cpu */ + policy->cur = cclk; + cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); +} + +static struct freq_attr *bfin_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver bfin_driver = { + .verify = bfin_verify_speed, + .target = bfin_target, + .get = bfin_getfreq, + .init = __bfin_cpu_init, + .name = "bfin cpufreq", + .owner = THIS_MODULE, + .attr = bfin_freq_attr, +}; + +static int __init bfin_cpu_init(void) +{ + return cpufreq_register_driver(&bfin_driver); +} + +static void __exit bfin_cpu_exit(void) +{ + cpufreq_unregister_driver(&bfin_driver); +} + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("cpufreq driver for Blackfin"); +MODULE_LICENSE("GPL"); + +module_init(bfin_cpu_init); +module_exit(bfin_cpu_exit); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index cee54cebbc6..f2fb87e9a46 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -38,6 +38,7 @@ #include <linux/unistd.h> #include <asm/blackfin.h> #include <asm/errno.h> +#include <asm/fixed_code.h> #include <asm/thread_info.h> /* TIF_NEED_RESCHED */ #include <asm/asm-offsets.h> #include <asm/trace.h> @@ -52,15 +53,6 @@ # define EX_SCRATCH_REG CYCLES #endif -#if ANOMALY_05000281 -ENTRY(_safe_speculative_execution) - NOP; - NOP; - NOP; - jump _safe_speculative_execution; -ENDPROC(_safe_speculative_execution) -#endif - #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text #else @@ -121,10 +113,14 @@ ENTRY(_ex_icplb_miss) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SAVE_ALL_SYS - DEBUG_HWTRACE_SAVE(p5, r7) #ifdef CONFIG_MPU + /* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that + * will change the stack pointer. */ R0 = SEQSTAT; R1 = SP; +#endif + DEBUG_HWTRACE_SAVE(p5, r7) +#ifdef CONFIG_MPU sp += -12; call _cplb_hdr; sp += 12; @@ -191,6 +187,7 @@ ENTRY(_bfin_return_from_exception) ENDPROC(_bfin_return_from_exception) ENTRY(_handle_bad_cplb) + DEBUG_HWTRACE_RESTORE(p5, r7) /* To get here, we just tried and failed to change a CPLB * so, handle things in trap_c (C code), by lowering to * IRQ5, just like we normally do. Since this is not a @@ -225,6 +222,26 @@ ENTRY(_ex_trap_c) [p4] = p5; csync; + p4.l = lo(DCPLB_FAULT_ADDR); + p4.h = hi(DCPLB_FAULT_ADDR); + r7 = [p4]; + p5.h = _saved_dcplb_fault_addr; + p5.l = _saved_dcplb_fault_addr; + [p5] = r7; + + r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)]; + p5.h = _saved_icplb_fault_addr; + p5.l = _saved_icplb_fault_addr; + [p5] = r7; + + p4.l = __retx; + p4.h = __retx; + r6 = retx; + [p4] = r6; + p4.l = lo(SAFE_USER_INSTRUCTION); + p4.h = hi(SAFE_USER_INSTRUCTION); + retx = p4; + /* Disable all interrupts, but make sure level 5 is enabled so * we can switch to that level. Save the old mask. */ cli r6; @@ -234,23 +251,6 @@ ENTRY(_ex_trap_c) r6 = 0x3f; sti r6; - /* Save the excause into a circular buffer, in case the instruction - * which caused this excecptions causes others. - */ - P5.l = _in_ptr_excause; - P5.h = _in_ptr_excause; - R7 = [P5]; - R7 += 4; - R6 = 0xF; - R7 = R7 & R6; - [P5] = R7; - R6.l = _excause_circ_buf; - R6.h = _excause_circ_buf; - R7 = R7 + R6; - p5 = R7; - R6 = SEQSTAT; - [P5] = R6; - (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SP = EX_SCRATCH_REG; @@ -307,6 +307,11 @@ ENDPROC(_double_fault) ENTRY(_exception_to_level5) SAVE_ALL_SYS + p4.l = __retx; + p4.h = __retx; + r6 = [p4]; + [sp + PT_PC] = r6; + /* Restore interrupt mask. We haven't pushed RETI, so this * doesn't enable interrupts until we return from this handler. */ p4.l = _excpt_saved_imask; @@ -328,42 +333,11 @@ ENTRY(_exception_to_level5) r0 = [p2]; /* Read current IPEND */ [sp + PT_IPEND] = r0; /* Store IPEND */ - /* Pop the excause from the circular buffer and push it on the stack - * (in the right place - if you change the location of SEQSTAT, you - * must change this offset. - */ -.L_excep_to_5_again: - P5.l = _out_ptr_excause; - P5.h = _out_ptr_excause; - R7 = [P5]; - R7 += 4; - R6 = 0xF; - R7 = R7 & R6; - [P5] = R7; - R6.l = _excause_circ_buf; - R6.h = _excause_circ_buf; - R7 = R7 + R6; - P5 = R7; - R1 = [P5]; - [SP + PT_SEQSTAT] = r1; - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; call _trap_c; SP += 12; - /* See if anything else is in the exception buffer - * if there is, process it - */ - P5.l = _out_ptr_excause; - P5.h = _out_ptr_excause; - P4.l = _in_ptr_excause; - P4.h = _in_ptr_excause; - R6 = [P5]; - R7 = [P4]; - CC = R6 == R7; - if ! CC JUMP .L_excep_to_5_again - call _ret_from_exception; RESTORE_ALL_SYS rti; @@ -727,8 +701,8 @@ ENTRY(_return_from_int) [p0] = p1; csync; #if ANOMALY_05000281 - r0.l = _safe_speculative_execution; - r0.h = _safe_speculative_execution; + r0.l = lo(SAFE_USER_INSTRUCTION); + r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; #endif r0 = 0x801f (z); @@ -741,8 +715,8 @@ ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) #if ANOMALY_05000281 - r0.l = _safe_speculative_execution; - r0.h = _safe_speculative_execution; + r0.l = lo(SAFE_USER_INSTRUCTION); + r0.h = hi(SAFE_USER_INSTRUCTION); reti = r0; #endif r0 = 0x401f; @@ -809,20 +783,6 @@ _schedule_and_signal: rti; ENDPROC(_lower_to_irq14) -/* Make sure when we start, that the circular buffer is initialized properly - * R0 and P0 are call clobbered, so we can use them here. - */ -ENTRY(_init_exception_buff) - r0 = 0; - p0.h = _in_ptr_excause; - p0.l = _in_ptr_excause; - [p0] = r0; - p0.h = _out_ptr_excause; - p0.l = _out_ptr_excause; - [p0] = r0; - rts; -ENDPROC(_init_exception_buff) - /* We handle this 100% in exception space - to reduce overhead * Only potiential problem is if the software buffer gets swapped out of the * CPLB table - then double fault. - so we don't let this happen in other places @@ -1398,17 +1358,7 @@ _exception_stack_top: _last_cplb_fault_retx: .long 0; #endif -/* - * Single instructions can have multiple faults, which need to be - * handled by traps.c, in irq5. We store the exception cause to ensure - * we don't miss a double fault condition - */ -ENTRY(_in_ptr_excause) + /* Used to save the real RETX when temporarily storing a safe + * return address. */ +__retx: .long 0; -ENTRY(_out_ptr_excause) - .long 0; -ALIGN -ENTRY(_excause_circ_buf) - .rept 4 - .long 0 - .endr diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 225ef14af75..f5fd768022e 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -316,7 +316,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, printk(KERN_ERR "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR" " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", - __FUNCTION__, __FILE__, __LINE__); + __func__, __FILE__, __LINE__); } #endif /* BF537_GENERIC_ERROR_INT_DEMUX */ @@ -326,6 +326,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; +extern void bfin_gpio_irq_prepare(unsigned gpio); static void bfin_gpio_ack_irq(unsigned int irq) { @@ -364,35 +365,25 @@ static void bfin_gpio_unmask_irq(unsigned int irq) static unsigned int bfin_gpio_irq_startup(unsigned int irq) { - unsigned int ret; u16 gpionr = irq - IRQ_PF0; - char buf[8]; - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); bfin_gpio_unmask_irq(irq); - return ret; + return 0; } static void bfin_gpio_irq_shutdown(unsigned int irq) { bfin_gpio_mask_irq(irq); - gpio_free(irq - IRQ_PF0); gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { - - unsigned int ret; - char buf[8]; u16 gpionr = irq - IRQ_PF0; if (type == IRQ_TYPE_PROBE) { @@ -404,12 +395,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); } else { @@ -595,6 +582,8 @@ static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { (struct pin_int_t *)PINT3_MASK_SET, }; +extern void bfin_gpio_irq_prepare(unsigned gpio); + inline unsigned short get_irq_base(u8 bank, u8 bmap) { @@ -697,8 +686,6 @@ static void bfin_gpio_unmask_irq(unsigned int irq) static unsigned int bfin_gpio_irq_startup(unsigned int irq) { - unsigned int ret; - char buf[8]; u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; @@ -709,17 +696,13 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) return -ENODEV; } - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); bfin_gpio_unmask_irq(irq); - return ret; + return 0; } static void bfin_gpio_irq_shutdown(unsigned int irq) @@ -727,15 +710,12 @@ static void bfin_gpio_irq_shutdown(unsigned int irq) u16 gpionr = irq_to_gpio(irq); bfin_gpio_mask_irq(irq); - gpio_free(gpionr); gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { - unsigned int ret; - char buf[8]; u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); @@ -753,12 +733,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - snprintf(buf, sizeof buf, "IRQ %d", irq); - ret = gpio_request(gpionr, buf); - if (ret) - return ret; - } + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) + bfin_gpio_irq_prepare(gpionr); gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); } else { @@ -766,8 +742,6 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) return 0; } - gpio_direction_input(gpionr); - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ else @@ -965,8 +939,6 @@ int __init init_arch_irq(void) local_irq_disable(); - init_exception_buff(); - #ifdef CONFIG_BF54x # ifdef CONFIG_PINTx_REASSIGN pint[0]->assign = CONFIG_PINT0_ASSIGN; diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 28b87fe9ce3..30b887e67dd 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -174,7 +174,7 @@ ENTRY(_cache_lock) CLI R3; R7 = [P1]; - R2 = 0xFFFFFF87 (X); + R2 = ~(0x78) (X); /* mask out ILOC */ R7 = R7 & R2; R0 = R0 << 3; R7 = R0 | R7; diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index e41f0e8ecac..3246f91c7ba 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -401,7 +401,7 @@ EXPORT_SYMBOL(l1_data_sram_free); void *l1_inst_sram_alloc(size_t size) { -#if L1_DATA_A_LENGTH != 0 +#if L1_CODE_LENGTH != 0 unsigned flags; void *addr; diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c index cb8b8d5af34..0f6d303a889 100644 --- a/arch/blackfin/oprofile/common.c +++ b/arch/blackfin/oprofile/common.c @@ -75,7 +75,7 @@ static int op_bfin_start(void) { int ret = -EBUSY; - printk(KERN_INFO "KSDBG:in %s\n", __FUNCTION__); + printk(KERN_INFO "KSDBG:in %s\n", __func__); mutex_lock(&pfmon_lock); if (!pfmon_enabled) { ret = model->start(ctr); diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c index 872dffe3362..d1c698bb9ee 100644 --- a/arch/blackfin/oprofile/op_model_bf533.c +++ b/arch/blackfin/oprofile/op_model_bf533.c @@ -125,7 +125,7 @@ int pm_overflow_handler(int irq, struct pt_regs *regs) unsigned int pc, pfctl; unsigned int count[2]; - pr_debug("get interrupt in %s\n", __FUNCTION__); + pr_debug("get interrupt in %s\n", __func__); if (oprofile_running == 0) { pr_debug("error: entering interrupt when oprofile is stopped.\n\r"); return -1; diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index a87b89db08e..2906ee7bd29 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -481,6 +481,34 @@ config BRIQ_PANEL It's safe to say N here. +config BFIN_OTP + tristate "Blackfin On-Chip OTP Memory Support" + depends on BLACKFIN && (BF52x || BF54x) + default y + help + If you say Y here, you will get support for a character device + interface into the One Time Programmable memory pages that are + stored on the Blackfin processor. This will not get you access + to the secure memory pages however. You will need to write your + own secure code and reader for that. + + To compile this driver as a module, choose M here: the module + will be called bfin-otp. + + If unsure, it is safe to say Y. + +config BFIN_OTP_WRITE_ENABLE + bool "Enable writing support of OTP pages" + depends on BFIN_OTP + default n + help + If you say Y here, you will enable support for writing of the + OTP pages. This is dangerous by nature as you can only program + the pages once, so only enable this option when you actually + need it so as to not inadvertently clobber data. + + If unsure, say N. + config PRINTER tristate "Parallel printer support" depends on PARPORT diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 5407b761561..4c1c584e9eb 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_SGI_MBCS) += mbcs.o obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o +obj-$(CONFIG_BFIN_OTP) += bfin-otp.o obj-$(CONFIG_PRINTER) += lp.o obj-$(CONFIG_TIPAR) += tipar.o diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c new file mode 100644 index 00000000000..0a01329451e --- /dev/null +++ b/drivers/char/bfin-otp.c @@ -0,0 +1,189 @@ +/* + * Blackfin On-Chip OTP Memory Interface + * Supports BF52x/BF54x + * + * Copyright 2007-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/types.h> + +#include <asm/blackfin.h> +#include <asm/uaccess.h> + +#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) +#define stampit() stamp("here i am") +#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); }) + +#define DRIVER_NAME "bfin-otp" +#define PFX DRIVER_NAME ": " + +static DEFINE_MUTEX(bfin_otp_lock); + +/* OTP Boot ROM functions */ +#define _BOOTROM_OTP_COMMAND 0xEF000018 +#define _BOOTROM_OTP_READ 0xEF00001A +#define _BOOTROM_OTP_WRITE 0xEF00001C + +static u32 (* const otp_command)(u32 command, u32 value) = (void *)_BOOTROM_OTP_COMMAND; +static u32 (* const otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_READ; +static u32 (* const otp_write)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_WRITE; + +/* otp_command(): defines for "command" */ +#define OTP_INIT 0x00000001 +#define OTP_CLOSE 0x00000002 + +/* otp_{read,write}(): defines for "flags" */ +#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */ +#define OTP_UPPER_HALF 0x00000001 +#define OTP_NO_ECC 0x00000010 /* do not use ECC */ +#define OTP_LOCK 0x00000020 /* sets page protection bit for page */ +#define OTP_ACCESS_READ 0x00001000 +#define OTP_ACCESS_READWRITE 0x00002000 + +/* Return values for all functions */ +#define OTP_SUCCESS 0x00000000 +#define OTP_MASTER_ERROR 0x001 +#define OTP_WRITE_ERROR 0x003 +#define OTP_READ_ERROR 0x005 +#define OTP_ACC_VIO_ERROR 0x009 +#define OTP_DATA_MULT_ERROR 0x011 +#define OTP_ECC_MULT_ERROR 0x021 +#define OTP_PREV_WR_ERROR 0x041 +#define OTP_DATA_SB_WARN 0x100 +#define OTP_ECC_SB_WARN 0x200 + +/** + * bfin_otp_read - Read OTP pages + * + * All reads must be in half page chunks (half page == 64 bits). + */ +static ssize_t bfin_otp_read(struct file *file, char __user *buff, size_t count, loff_t *pos) +{ + ssize_t bytes_done; + u32 page, flags, ret; + u64 content; + + stampit(); + + if (count % sizeof(u64)) + return -EMSGSIZE; + + if (mutex_lock_interruptible(&bfin_otp_lock)) + return -ERESTARTSYS; + + bytes_done = 0; + page = *pos / (sizeof(u64) * 2); + while (bytes_done < count) { + flags = (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF); + stamp("processing page %i (%s)", page, (flags == OTP_UPPER_HALF ? "upper" : "lower")); + ret = otp_read(page, flags, &content); + if (ret & OTP_MASTER_ERROR) { + bytes_done = -EIO; + break; + } + if (copy_to_user(buff + bytes_done, &content, sizeof(content))) { + bytes_done = -EFAULT; + break; + } + if (flags == OTP_UPPER_HALF) + ++page; + bytes_done += sizeof(content); + *pos += sizeof(content); + } + + mutex_unlock(&bfin_otp_lock); + + return bytes_done; +} + +#ifdef CONFIG_BFIN_OTP_WRITE_ENABLE +/** + * bfin_otp_write - Write OTP pages + * + * All writes must be in half page chunks (half page == 64 bits). + */ +static ssize_t bfin_otp_write(struct file *filp, const char __user *buff, size_t count, loff_t *pos) +{ + stampit(); + + if (count % sizeof(u64)) + return -EMSGSIZE; + + if (mutex_lock_interruptible(&bfin_otp_lock)) + return -ERESTARTSYS; + + /* need otp_init() documentation before this can be implemented */ + + mutex_unlock(&bfin_otp_lock); + + return -EINVAL; +} +#else +# define bfin_otp_write NULL +#endif + +static struct file_operations bfin_otp_fops = { + .owner = THIS_MODULE, + .read = bfin_otp_read, + .write = bfin_otp_write, +}; + +static struct miscdevice bfin_otp_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = DRIVER_NAME, + .fops = &bfin_otp_fops, +}; + +/** + * bfin_otp_init - Initialize module + * + * Registers the device and notifier handler. Actual device + * initialization is handled by bfin_otp_open(). + */ +static int __init bfin_otp_init(void) +{ + int ret; + + stampit(); + + ret = misc_register(&bfin_otp_misc_device); + if (ret) { + pr_init(KERN_ERR PFX "unable to register a misc device\n"); + return ret; + } + + pr_init(KERN_INFO PFX "initialized\n"); + + return 0; +} + +/** + * bfin_otp_exit - Deinitialize module + * + * Unregisters the device and notifier handler. Actual device + * deinitialization is handled by bfin_otp_close(). + */ +static void __exit bfin_otp_exit(void) +{ + stampit(); + + misc_deregister(&bfin_otp_misc_device); +} + +module_init(bfin_otp_init); +module_exit(bfin_otp_exit); + +MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>"); +MODULE_DESCRIPTION("Blackfin OTP Memory Interface"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2399a3796f6..015e1632597 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -827,7 +827,7 @@ config ULTRA32 config BFIN_MAC tristate "Blackfin 527/536/537 on-chip mac support" - depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H) + depends on NET_ETHERNET && (BF527 || BF537 || BF536) select CRC32 select MII select PHYLIB diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 46bb47f37b9..5f55534a290 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -151,7 +151,8 @@ void kgdb_put_debug_char(int chr) { struct bfin_serial_port *uart; - if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS) + if (CONFIG_KGDB_UART_PORT < 0 + || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) uart = &bfin_serial_ports[0]; else uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; @@ -173,7 +174,8 @@ int kgdb_get_debug_char(void) struct bfin_serial_port *uart; unsigned char chr; - if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS) + if (CONFIG_KGDB_UART_PORT < 0 + || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) uart = &bfin_serial_ports[0]; else uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; @@ -192,7 +194,7 @@ int kgdb_get_debug_char(void) } #endif -#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO) +#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) # define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) # define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) #else @@ -237,7 +239,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) } #endif - if (ANOMALY_05000230) { + if (ANOMALY_05000363) { /* The BF533 (and BF561) family of processors have a nice anomaly * where they continuously generate characters for a "single" break. * We have to basically ignore this flood until the "next" valid @@ -249,9 +251,6 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) * timeout was picked as it must absolutely be larger than 1 * character time +/- some percent. So 1.5 sounds good. All other * Blackfin families operate properly. Woo. - * Note: While Anomaly 05000230 does not directly address this, - * the changes that went in for it also fixed this issue. - * That anomaly was fixed in 0.5+ silicon. I like bunnies. */ if (anomaly_start.tv_sec) { struct timeval curr; @@ -285,7 +284,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) } if (status & BI) { - if (ANOMALY_05000230) + if (ANOMALY_05000363) if (bfin_revid() < 5) do_gettimeofday(&anomaly_start); uart->port.icount.brk++; @@ -507,8 +506,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; - add_timer(&(uart->rx_dma_timer)); + mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); } static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) @@ -551,9 +549,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) clear_dma_irqstat(uart->rx_dma_channel); spin_unlock(&uart->port.lock); - del_timer(&(uart->rx_dma_timer)); - uart->rx_dma_timer.expires = jiffies; - add_timer(&(uart->rx_dma_timer)); + mod_timer(&(uart->rx_dma_timer), jiffies); return IRQ_HANDLED; } @@ -749,7 +745,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct bfin_serial_port *uart = (struct bfin_serial_port *)port; unsigned long flags; unsigned int baud, quot; - unsigned short val, ier, lsr, lcr = 0; + unsigned short val, ier, lcr = 0; switch (termios->c_cflag & CSIZE) { case CS8: @@ -806,10 +802,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); - do { - lsr = UART_GET_LSR(uart); - } while (!(lsr & TEMT)); - /* Disable UART */ ier = UART_GET_IER(uart); #ifdef CONFIG_BF54x @@ -900,6 +892,31 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) return 0; } +/* + * Enable the IrDA function if tty->ldisc.num is N_IRDA. + * In other cases, disable IrDA function. + */ +static void bfin_set_ldisc(struct tty_struct *tty) +{ + int line = tty->index; + unsigned short val; + + if (line >= tty->driver->num) + return; + + switch (tty->ldisc.num) { + case N_IRDA: + val = UART_GET_GCTL(&bfin_serial_ports[line]); + val |= (IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + break; + default: + val = UART_GET_GCTL(&bfin_serial_ports[line]); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + } +} + static struct uart_ops bfin_serial_pops = { .tx_empty = bfin_serial_tx_empty, .set_mctrl = bfin_serial_set_mctrl, @@ -1172,7 +1189,7 @@ static struct uart_driver bfin_serial_reg = { .dev_name = BFIN_SERIAL_NAME, .major = BFIN_SERIAL_MAJOR, .minor = BFIN_SERIAL_MINOR, - .nr = NR_PORTS, + .nr = BFIN_UART_NR_PORTS, .cons = BFIN_SERIAL_CONSOLE, }; @@ -1261,6 +1278,7 @@ static int __init bfin_serial_init(void) ret = uart_register_driver(&bfin_serial_reg); if (ret == 0) { + bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc; ret = platform_driver_register(&bfin_serial_driver); if (ret) { pr_debug("uart register failed\n"); diff --git a/include/asm-blackfin/.gitignore b/include/asm-blackfin/.gitignore new file mode 100644 index 00000000000..7858564a446 --- /dev/null +++ b/include/asm-blackfin/.gitignore @@ -0,0 +1 @@ ++mach diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 5dba3a73559..716df7c8592 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -112,20 +112,10 @@ extern void init_leds(void); extern const char bfin_board_name[]; extern unsigned long wall_jiffies; -extern unsigned long ipdt_table[]; -extern unsigned long dpdt_table[]; -extern unsigned long icplb_table[]; -extern unsigned long dcplb_table[]; - -extern unsigned long ipdt_swapcount_table[]; -extern unsigned long dpdt_swapcount_table[]; - -extern unsigned long table_start, table_end; extern unsigned long bfin_sic_iwr[]; extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ extern struct file_operations dpmc_fops; -extern char _start; extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], diff --git a/include/asm-blackfin/bug.h b/include/asm-blackfin/bug.h index 41e53b29f16..6d3e11b1fc5 100644 --- a/include/asm-blackfin/bug.h +++ b/include/asm-blackfin/bug.h @@ -1,4 +1,17 @@ #ifndef _BLACKFIN_BUG_H #define _BLACKFIN_BUG_H + +#ifdef CONFIG_BUG +#define HAVE_ARCH_BUG + +#define BUG() do { \ + dump_bfin_trace_buffer(); \ + printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ + panic("BUG!"); \ +} while (0) + +#endif + #include <asm-generic/bug.h> + #endif diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index 654375c2b74..5b0da9a69b6 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -74,32 +74,6 @@ #define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M) -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* possibly 1 for L2 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 \ - + ASYNC_MEMORY_CPLB_COVERAGE) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* possibly 1 for L2 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2) - - #define CPLB_ENABLE_ICACHE_P 0 #define CPLB_ENABLE_DCACHE_P 1 #define CPLB_ENABLE_DCACHE2_P 2 diff --git a/include/asm-blackfin/dma-mapping.h b/include/asm-blackfin/dma-mapping.h index 282fabccf6a..1a13c2fc366 100644 --- a/include/asm-blackfin/dma-mapping.h +++ b/include/asm-blackfin/dma-mapping.h @@ -27,6 +27,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction); +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, dir); +} + /* * Unmap a single streaming mode DMA translation. The dma_addr and size * must match what was provided for in a previous pci_map_single call. All @@ -38,6 +46,13 @@ extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction); +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction dir) +{ + dma_unmap_single(dev, dma_addr, size, dir); +} + /* * Map a set of buffers described by scatterlist in streaming * mode for DMA. This is the scather-gather version of the diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h index 16d493574ba..c0d5259e315 100644 --- a/include/asm-blackfin/dma.h +++ b/include/asm-blackfin/dma.h @@ -191,4 +191,7 @@ void clear_dma_irqstat(unsigned int channel); void *dma_memcpy(void *dest, const void *src, size_t count); void *safe_dma_memcpy(void *dest, const void *src, size_t count); +extern int channel2irq(unsigned int channel); +extern struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL]; + #endif diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h index 4f318f1fd2d..0520d2aac8f 100644 --- a/include/asm-blackfin/gptimers.h +++ b/include/asm-blackfin/gptimers.h @@ -22,6 +22,18 @@ # define TIMER0_GROUP_REG TIMER_ENABLE #endif /* + * BF54x: 11 timers (BF542: 8 timers): + */ +#if defined(BF548_FAMILY) +# ifdef CONFIG_BF542 +# define MAX_BLACKFIN_GPTIMERS 8 +# else +# define MAX_BLACKFIN_GPTIMERS 11 +# define TIMER8_GROUP_REG TIMER_ENABLE1 +# endif +# define TIMER0_GROUP_REG TIMER_ENABLE0 +#endif +/* * BF561: 12 timers: */ #if defined(CONFIG_BF561) @@ -44,40 +56,28 @@ #define TIMER0bit 0x0001 /* 0001b */ #define TIMER1bit 0x0002 /* 0010b */ #define TIMER2bit 0x0004 /* 0100b */ - -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER3bit 0x0008 -# define TIMER4bit 0x0010 -# define TIMER5bit 0x0020 -# define TIMER6bit 0x0040 -# define TIMER7bit 0x0080 -#endif - -#if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER8bit 0x0100 -# define TIMER9bit 0x0200 -# define TIMER10bit 0x0400 -# define TIMER11bit 0x0800 -#endif +#define TIMER3bit 0x0008 +#define TIMER4bit 0x0010 +#define TIMER5bit 0x0020 +#define TIMER6bit 0x0040 +#define TIMER7bit 0x0080 +#define TIMER8bit 0x0100 +#define TIMER9bit 0x0200 +#define TIMER10bit 0x0400 +#define TIMER11bit 0x0800 #define TIMER0_id 0 #define TIMER1_id 1 #define TIMER2_id 2 - -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER3_id 3 -# define TIMER4_id 4 -# define TIMER5_id 5 -# define TIMER6_id 6 -# define TIMER7_id 7 -#endif - -#if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER8_id 8 -# define TIMER9_id 9 -# define TIMER10_id 10 -# define TIMER11_id 11 -#endif +#define TIMER3_id 3 +#define TIMER4_id 4 +#define TIMER5_id 5 +#define TIMER6_id 6 +#define TIMER7_id 7 +#define TIMER8_id 8 +#define TIMER9_id 9 +#define TIMER10_id 10 +#define TIMER11_id 11 /* associated timers for ppi framesync: */ @@ -124,45 +124,31 @@ /* * Timer Status Register Bits */ -#define TIMER_STATUS_TIMIL0 0x0001 -#define TIMER_STATUS_TIMIL1 0x0002 -#define TIMER_STATUS_TIMIL2 0x0004 -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER_STATUS_TIMIL3 0x00000008 -# define TIMER_STATUS_TIMIL4 0x00010000 -# define TIMER_STATUS_TIMIL5 0x00020000 -# define TIMER_STATUS_TIMIL6 0x00040000 -# define TIMER_STATUS_TIMIL7 0x00080000 -# if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER_STATUS_TIMIL8 0x0001 -# define TIMER_STATUS_TIMIL9 0x0002 -# define TIMER_STATUS_TIMIL10 0x0004 -# define TIMER_STATUS_TIMIL11 0x0008 -# endif -# define TIMER_STATUS_INTR 0x000F000F -#else -# define TIMER_STATUS_INTR 0x0007 /* any timer interrupt */ -#endif - -#define TIMER_STATUS_TOVF0 0x0010 /* timer 0 overflow error */ -#define TIMER_STATUS_TOVF1 0x0020 -#define TIMER_STATUS_TOVF2 0x0040 -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER_STATUS_TOVF3 0x00000080 -# define TIMER_STATUS_TOVF4 0x00100000 -# define TIMER_STATUS_TOVF5 0x00200000 -# define TIMER_STATUS_TOVF6 0x00400000 -# define TIMER_STATUS_TOVF7 0x00800000 -# if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER_STATUS_TOVF8 0x0010 -# define TIMER_STATUS_TOVF9 0x0020 -# define TIMER_STATUS_TOVF10 0x0040 -# define TIMER_STATUS_TOVF11 0x0080 -# endif -# define TIMER_STATUS_OFLOW 0x00F000F0 -#else -# define TIMER_STATUS_OFLOW 0x0070 /* any timer overflow */ -#endif +#define TIMER_STATUS_TIMIL0 0x0001 +#define TIMER_STATUS_TIMIL1 0x0002 +#define TIMER_STATUS_TIMIL2 0x0004 +#define TIMER_STATUS_TIMIL3 0x00000008 +#define TIMER_STATUS_TIMIL4 0x00010000 +#define TIMER_STATUS_TIMIL5 0x00020000 +#define TIMER_STATUS_TIMIL6 0x00040000 +#define TIMER_STATUS_TIMIL7 0x00080000 +#define TIMER_STATUS_TIMIL8 0x0001 +#define TIMER_STATUS_TIMIL9 0x0002 +#define TIMER_STATUS_TIMIL10 0x0004 +#define TIMER_STATUS_TIMIL11 0x0008 + +#define TIMER_STATUS_TOVF0 0x0010 /* timer 0 overflow error */ +#define TIMER_STATUS_TOVF1 0x0020 +#define TIMER_STATUS_TOVF2 0x0040 +#define TIMER_STATUS_TOVF3 0x00000080 +#define TIMER_STATUS_TOVF4 0x00100000 +#define TIMER_STATUS_TOVF5 0x00200000 +#define TIMER_STATUS_TOVF6 0x00400000 +#define TIMER_STATUS_TOVF7 0x00800000 +#define TIMER_STATUS_TOVF8 0x0010 +#define TIMER_STATUS_TOVF9 0x0020 +#define TIMER_STATUS_TOVF10 0x0040 +#define TIMER_STATUS_TOVF11 0x0080 /* * Timer Slave Enable Status : write 1 to clear @@ -170,22 +156,16 @@ #define TIMER_STATUS_TRUN0 0x1000 #define TIMER_STATUS_TRUN1 0x2000 #define TIMER_STATUS_TRUN2 0x4000 -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER_STATUS_TRUN3 0x00008000 -# define TIMER_STATUS_TRUN4 0x10000000 -# define TIMER_STATUS_TRUN5 0x20000000 -# define TIMER_STATUS_TRUN6 0x40000000 -# define TIMER_STATUS_TRUN7 0x80000000 -# define TIMER_STATUS_TRUN 0xF000F000 -# if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER_STATUS_TRUN8 0x1000 -# define TIMER_STATUS_TRUN9 0x2000 -# define TIMER_STATUS_TRUN10 0x4000 -# define TIMER_STATUS_TRUN11 0x8000 -# endif -#else -# define TIMER_STATUS_TRUN 0x7000 -#endif +#define TIMER_STATUS_TRUN3 0x00008000 +#define TIMER_STATUS_TRUN4 0x10000000 +#define TIMER_STATUS_TRUN5 0x20000000 +#define TIMER_STATUS_TRUN6 0x40000000 +#define TIMER_STATUS_TRUN7 0x80000000 +#define TIMER_STATUS_TRUN 0xF000F000 +#define TIMER_STATUS_TRUN8 0x1000 +#define TIMER_STATUS_TRUN9 0x2000 +#define TIMER_STATUS_TRUN10 0x4000 +#define TIMER_STATUS_TRUN11 0x8000 /* The actual gptimer API */ diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h index a89120445be..735fa02fafb 100644 --- a/include/asm-blackfin/mach-bf527/anomaly.h +++ b/include/asm-blackfin/mach-bf527/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf527/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision A, May 30, 2007; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -15,35 +15,85 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) -/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ -#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) -/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ -#define ANOMALY_05000301 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (1) /* Incorrect Access of OTP_STATUS During otp_write() Function */ #define ANOMALY_05000328 (1) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ #define ANOMALY_05000337 (1) -/* TWI Does Not Operate Correctly Under Certain Signal Termination Conditions */ +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (1) +/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ #define ANOMALY_05000342 (1) -/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ +/* USB Calibration Value Is Not Initialized */ +#define ANOMALY_05000346 (1) +/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ #define ANOMALY_05000347 (1) +/* Security Features Are Not Functional */ +#define ANOMALY_05000348 (__SILICON_REVISION__ < 1) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000364 (__SILICON_REVISION__ > 0) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* New Feature: Higher Default CCLK Rate */ +#define ANOMALY_05000368 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* Authentication Fails To Initiate */ +#define ANOMALY_05000376 (__SILICON_REVISION__ > 0) +/* Data Read From L3 Memory by USB DMA May be Corrupted */ +#define ANOMALY_05000380 (1) +/* USB Full-speed Mode not Fully Tested */ +#define ANOMALY_05000381 (1) +/* New Feature: Boot from OTP Memory */ +#define ANOMALY_05000385 (1) +/* New Feature: bfrom_SysControl() Routine */ +#define ANOMALY_05000386 (1) +/* New Feature: Programmable Preboot Settings */ +#define ANOMALY_05000387 (1) +/* Reset Vector Must Not Be in SDRAM Memory Space */ +#define ANOMALY_05000389 (1) +/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (1) +/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (1) +/* New Feature: Log Buffer Functionality */ +#define ANOMALY_05000394 (1) +/* New Feature: Hook Routine Functionality */ +#define ANOMALY_05000395 (1) +/* New Feature: Header Indirect Bit */ +#define ANOMALY_05000396 (1) +/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */ +#define ANOMALY_05000397 (1) +/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */ +#define ANOMALY_05000398 (1) +/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */ +#define ANOMALY_05000399 (1) +/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ +#define ANOMALY_05000401 (1) /* Anomalies that don't exist on this proc */ -#define ANOMALY_05000323 (0) -#define ANOMALY_05000244 (0) -#define ANOMALY_05000198 (0) #define ANOMALY_05000125 (0) #define ANOMALY_05000158 (0) -#define ANOMALY_05000273 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) -#define ANOMALY_05000230 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) + #endif diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index c0694ecd2ec..f0ab2736a68 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf527/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 2 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -92,7 +108,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/include/asm-blackfin/mach-bf527/bfin_sir.h new file mode 100644 index 00000000000..0612d0c9501 --- /dev/null +++ b/include/asm-blackfin/mach-bf527/bfin_sir.h @@ -0,0 +1,133 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf527/blackfin.h b/include/asm-blackfin/mach-bf527/blackfin.h index 1bd07e30781..2891727b617 100644 --- a/include/asm-blackfin/mach-bf527/blackfin.h +++ b/include/asm-blackfin/mach-bf527/blackfin.h @@ -64,6 +64,21 @@ #define STATUS_P1 0x02 #define STATUS_P0 0x01 +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + /* DPMC*/ #define bfin_read_STOPCK_OFF() bfin_read_STOPCK() #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) diff --git a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h b/include/asm-blackfin/mach-bf527/cdefBF52x_base.h index 3f4de5d9d4c..9dbdbec8ea1 100644 --- a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h +++ b/include/asm-blackfin/mach-bf527/cdefBF52x_base.h @@ -29,18 +29,71 @@ */ #ifndef _CDEF_BF52X_H +#define _CDEF_BF52X_H + +#include <asm/system.h> +#include <asm/blackfin.h> #include "defBF52x_base.h" +/* Include core specific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + /* ==== begin from cdefBF534.h ==== */ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) -#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -873,39 +926,6 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) -#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) -#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) - /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ #define bfin_read_PORTGIO() bfin_read16(PORTGIO) diff --git a/include/asm-blackfin/mach-bf527/dma.h b/include/asm-blackfin/mach-bf527/dma.h index 2dfee12864f..49dd693223e 100644 --- a/include/asm-blackfin/mach-bf527/dma.h +++ b/include/asm-blackfin/mach-bf527/dma.h @@ -59,7 +59,4 @@ #define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */ #endif -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index 98209d40abb..5a6dcc5fa36 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision B, 12/10/2007; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + * - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -251,10 +251,18 @@ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ #define ANOMALY_05000357 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) +/* PPI Does Not Start Properly In Specific Mode */ +#define ANOMALY_05000400 (__SILICON_REVISION__ == 5) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ == 5) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000266 (0) diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index b6f513bee56..fbe88dee3e2 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf533/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 1 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -84,7 +100,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; @@ -115,7 +131,7 @@ struct bfin_serial_res bfin_serial_resource[] = { #define DRIVER_NAME "bfin-uart" -int nr_ports = NR_PORTS; +int nr_ports = BFIN_UART_NR_PORTS; static void bfin_serial_hw_init(struct bfin_serial_port *uart) { diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/include/asm-blackfin/mach-bf533/bfin_sir.h new file mode 100644 index 00000000000..cefcf8bb505 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/bfin_sir.h @@ -0,0 +1,120 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART_RX, + CH_UART_RX, + CH_UART_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h index f3b240abf17..d80971b4e3a 100644 --- a/include/asm-blackfin/mach-bf533/blackfin.h +++ b/include/asm-blackfin/mach-bf533/blackfin.h @@ -42,4 +42,19 @@ #include "cdefBF532.h" #endif +#define BFIN_UART_NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + #endif /* _MACH_BLACKFIN_H_ */ diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h index c803e14b529..154655452d4 100644 --- a/include/asm-blackfin/mach-bf533/cdefBF532.h +++ b/include/asm-blackfin/mach-bf533/cdefBF532.h @@ -43,7 +43,27 @@ /* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -57,6 +77,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr = bfin_read32(SIC_IWR); /* Only allow PPL Wakeup) */ @@ -64,11 +88,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); } /* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index 37134aaf995..17e1548cec0 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -88,20 +88,25 @@ #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ /* UART Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART_THR 0xFFC00400 /* Transmit Holding register */ -#define UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART_LCR 0xFFC0040C /* Line Control Register */ -#define UART_MCR 0xFFC00410 /* Modem Control Register */ -#define UART_LSR 0xFFC00414 /* Line Status Register */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ #if 0 -#define UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ #endif -#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART_GCTL 0xFFC00424 /* Global Control Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI0_REGBASE 0xFFC00500 diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h index 16c672c01d8..bd9d5e94307 100644 --- a/include/asm-blackfin/mach-bf533/dma.h +++ b/include/asm-blackfin/mach-bf533/dma.h @@ -51,7 +51,4 @@ #define CH_MEM_STREAM1_DEST 10 /* TX */ #define CH_MEM_STREAM1_SRC 11 /* RX */ -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h index 1620dae5254..f8f31901fca 100644 --- a/include/asm-blackfin/mach-bf533/mem_init.h +++ b/include/asm-blackfin/mach-bf533/mem_init.h @@ -29,7 +29,8 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD) +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \ + CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD) #if (CONFIG_SCLK_HZ > 119402985) #define SDRAM_tRP TRP_2 #define SDRAM_tRP_num 2 @@ -118,6 +119,13 @@ #define SDRAM_CL CL_3 #endif +#if (CONFIG_MEM_MT48LC32M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + #if (CONFIG_MEM_GENERIC_BOARD) /*SDRAM INFORMATION: Modify this for your board */ #define SDRAM_Tref 64 /* Refresh period in milliseconds */ diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 746a794b311..a6b08facb24 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision A, 09/04/2007; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + * - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -132,10 +132,24 @@ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) +/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */ +#define ANOMALY_05000350 (__SILICON_REVISION__ < 3) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (1) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ #define ANOMALY_05000357 (1) /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ #define ANOMALY_05000359 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + + /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -146,5 +160,6 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 8fc672d3105..fd100a415b9 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf537/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver header files + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 2 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -92,7 +108,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/include/asm-blackfin/mach-bf537/bfin_sir.h new file mode 100644 index 00000000000..0612d0c9501 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/bfin_sir.h @@ -0,0 +1,133 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h index 53fcfa3408d..cffc786b2a2 100644 --- a/include/asm-blackfin/mach-bf537/blackfin.h +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -82,8 +82,6 @@ #define STATUS_P1 0x02 #define STATUS_P0 0x01 -/* UART 0*/ - /* DMA Channnel */ #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) @@ -106,37 +104,52 @@ /* MMR Registers*/ #define bfin_read_UART_THR() bfin_read_UART0_THR() #define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) -#define UART_THR UART0_THR +#define BFIN_UART_THR UART0_THR #define bfin_read_UART_RBR() bfin_read_UART0_RBR() #define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) -#define UART_RBR UART0_RBR +#define BFIN_UART_RBR UART0_RBR #define bfin_read_UART_DLL() bfin_read_UART0_DLL() #define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) -#define UART_DLL UART0_DLL +#define BFIN_UART_DLL UART0_DLL #define bfin_read_UART_IER() bfin_read_UART0_IER() #define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) -#define UART_IER UART0_IER +#define BFIN_UART_IER UART0_IER #define bfin_read_UART_DLH() bfin_read_UART0_DLH() #define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) -#define UART_DLH UART0_DLH +#define BFIN_UART_DLH UART0_DLH #define bfin_read_UART_IIR() bfin_read_UART0_IIR() #define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) -#define UART_IIR UART0_IIR +#define BFIN_UART_IIR UART0_IIR #define bfin_read_UART_LCR() bfin_read_UART0_LCR() #define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) -#define UART_LCR UART0_LCR +#define BFIN_UART_LCR UART0_LCR #define bfin_read_UART_MCR() bfin_read_UART0_MCR() #define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) -#define UART_MCR UART0_MCR +#define BFIN_UART_MCR UART0_MCR #define bfin_read_UART_LSR() bfin_read_UART0_LSR() #define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) -#define UART_LSR UART0_LSR +#define BFIN_UART_LSR UART0_LSR #define bfin_read_UART_SCR() bfin_read_UART0_SCR() #define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) -#define UART_SCR UART0_SCR +#define BFIN_UART_SCR UART0_SCR #define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() #define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) -#define UART_GCTL UART0_GCTL +#define BFIN_UART_GCTL UART0_GCTL + +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ /* DPMC*/ #define bfin_read_STOPCK_OFF() bfin_read_STOPCK() diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h index 78227bc855d..82de526f809 100644 --- a/include/asm-blackfin/mach-bf537/cdefBF534.h +++ b/include/asm-blackfin/mach-bf537/cdefBF534.h @@ -44,7 +44,27 @@ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) @@ -53,6 +73,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr = bfin_read32(SIC_IWR); /* Only allow PPL Wakeup) */ @@ -60,11 +84,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); } #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) @@ -858,39 +881,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) #define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) -/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV,val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL,val) -#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) -#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL,val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT,val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR,val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL,val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT,val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR,val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT,val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK,val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL,val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT,val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8,val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16,val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8,val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16,val) +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ #define bfin_read_PORTGIO() bfin_read16(PORTGIO) diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h index 021991984e6..7a964040870 100644 --- a/include/asm-blackfin/mach-bf537/dma.h +++ b/include/asm-blackfin/mach-bf537/dma.h @@ -52,7 +52,4 @@ #define CH_MEM_STREAM1_DEST 14 /* TX */ #define CH_MEM_STREAM1_SRC 15 /* RX */ -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index 850dc12eb7f..49d3cebc529 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -93,5 +93,6 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 7e6339f62a5..6547027cd3e 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf548/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 4 - -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_GCTL 0x08 /* Global Control Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */ -#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */ -#define OFFSET_THR 0x28 /* Transmit Holding register */ -#define OFFSET_RBR 0x2C /* Receive Buffer register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) @@ -80,7 +96,7 @@ struct bfin_serial_port { #endif }; -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/include/asm-blackfin/mach-bf548/bfin_sir.h new file mode 100644 index 00000000000..5e94271c7e3 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/bfin_sir.h @@ -0,0 +1,149 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v) +#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR2 + { + 0xFFC02100, + IRQ_UART2_RX, + CH_UART2_RX, + CH_UART2_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR3 + { + 0xFFC03100, + IRQ_UART3_RX, + CH_UART3_RX, + CH_UART3_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR2 + peripheral_request(P_UART2_TX, DRIVER_NAME); + peripheral_request(P_UART2_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR3 + peripheral_request(P_UART3_TX, DRIVER_NAME); + peripheral_request(P_UART3_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h index 3bd67da8605..d6ee74ac046 100644 --- a/include/asm-blackfin/mach-bf548/blackfin.h +++ b/include/asm-blackfin/mach-bf548/blackfin.h @@ -153,17 +153,33 @@ #define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) #define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() #define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) -#define UART_THR UART1_THR -#define UART_RBR UART1_RBR -#define UART_DLL UART1_DLL -#define UART_IER UART1_IER -#define UART_DLH UART1_DLH -#define UART_IIR UART1_IIR -#define UART_LCR UART1_LCR -#define UART_MCR UART1_MCR -#define UART_LSR UART1_LSR -#define UART_SCR UART1_SCR -#define UART_GCTL UART1_GCTL + +#define BFIN_UART_THR UART1_THR +#define BFIN_UART_RBR UART1_RBR +#define BFIN_UART_DLL UART1_DLL +#define BFIN_UART_IER UART1_IER +#define BFIN_UART_DLH UART1_DLH +#define BFIN_UART_IIR UART1_IIR +#define BFIN_UART_LCR UART1_LCR +#define BFIN_UART_MCR UART1_MCR +#define BFIN_UART_LSR UART1_LSR +#define BFIN_UART_SCR UART1_SCR +#define BFIN_UART_GCTL UART1_GCTL + +#define BFIN_UART_NR_PORTS 4 + +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_GCTL 0x08 /* Global Control Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */ +#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */ +#define OFFSET_THR 0x28 /* Transmit Holding register */ +#define OFFSET_RBR 0x2C /* Receive Buffer register */ /* PLL_DIV Masks */ #define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF542.h b/include/asm-blackfin/mach-bf548/cdefBF542.h index 308b33ab531..60b9f77576f 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF542.h +++ b/include/asm-blackfin/mach-bf548/cdefBF542.h @@ -123,12 +123,12 @@ #define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) #define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) #define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) -#define bfin_read_SDH_DATA_CNT() fin_read16(SDH_DATA_CNT) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) #define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) #define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) #define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) -#define bfin_read_SDH_STATUS_CLR() fin_read16(SDH_STATUS_CLR) -#define bfin_write_SDH_STATUS_CLR(val) fin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) #define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) #define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) #define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) @@ -184,8 +184,8 @@ #define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) #define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) #define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() fin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) fin_write16(USB_TESTMODE, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) #define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) #define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) #define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) @@ -244,7 +244,7 @@ #define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) #define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) #define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) fin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) #define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) #define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) diff --git a/include/asm-blackfin/mach-bf548/cdefBF544.h b/include/asm-blackfin/mach-bf548/cdefBF544.h index 7a2d177c8dc..ea9b4ab496f 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF544.h +++ b/include/asm-blackfin/mach-bf548/cdefBF544.h @@ -113,39 +113,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* CAN Controller 1 Config 1 Registers */ #define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/include/asm-blackfin/mach-bf548/cdefBF547.h index d0a200b08ab..ba716277c00 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF547.h +++ b/include/asm-blackfin/mach-bf548/cdefBF547.h @@ -185,39 +185,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* SPI2 Registers */ #define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) diff --git a/include/asm-blackfin/mach-bf548/cdefBF548.h b/include/asm-blackfin/mach-bf548/cdefBF548.h index 674be0216bf..ae971ebff6a 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF548.h +++ b/include/asm-blackfin/mach-bf548/cdefBF548.h @@ -185,39 +185,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* SPI2 Registers */ #define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) diff --git a/include/asm-blackfin/mach-bf548/cdefBF549.h b/include/asm-blackfin/mach-bf548/cdefBF549.h index 2ab5b7c0082..92d07d96199 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF549.h +++ b/include/asm-blackfin/mach-bf548/cdefBF549.h @@ -185,39 +185,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* SPI2 Registers */ #define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) @@ -1773,7 +1740,7 @@ #define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) #define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) #define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) fin_write16(USB_DMA5COUNTLOW, val) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) #define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) #define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h index 19ddcd83c71..57ac8cb9b1f 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -43,7 +43,33 @@ /* PLL Registers */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) @@ -52,6 +78,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr0, iwr1, iwr2; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr0 = bfin_read32(SIC_IWR0); iwr1 = bfin_read32(SIC_IWR1); @@ -63,13 +93,12 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SIC_IWR0, iwr0); bfin_write32(SIC_IWR1, iwr1); bfin_write32(SIC_IWR2, iwr2); + local_irq_restore(flags); } #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) @@ -211,39 +240,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* Two Wire Interface Registers (TWI0) */ -#define bfin_read_TWI0_CLKDIV() bfin_read16(TWI0_CLKDIV) -#define bfin_write_TWI0_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val) -#define bfin_read_TWI0_CONTROL() bfin_read16(TWI0_CONTROL) -#define bfin_write_TWI0_CONTROL(val) bfin_write16(TWI0_CONTROL, val) -#define bfin_read_TWI0_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL) -#define bfin_write_TWI0_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val) -#define bfin_read_TWI0_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT) -#define bfin_write_TWI0_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val) -#define bfin_read_TWI0_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR) -#define bfin_write_TWI0_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val) -#define bfin_read_TWI0_MASTER_CTRL() bfin_read16(TWI0_MASTER_CTRL) -#define bfin_write_TWI0_MASTER_CTRL(val) bfin_write16(TWI0_MASTER_CTRL, val) -#define bfin_read_TWI0_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT) -#define bfin_write_TWI0_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val) -#define bfin_read_TWI0_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR) -#define bfin_write_TWI0_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val) -#define bfin_read_TWI0_INT_STAT() bfin_read16(TWI0_INT_STAT) -#define bfin_write_TWI0_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val) -#define bfin_read_TWI0_INT_MASK() bfin_read16(TWI0_INT_MASK) -#define bfin_write_TWI0_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val) -#define bfin_read_TWI0_FIFO_CTRL() bfin_read16(TWI0_FIFO_CTRL) -#define bfin_write_TWI0_FIFO_CTRL(val) bfin_write16(TWI0_FIFO_CTRL, val) -#define bfin_read_TWI0_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT) -#define bfin_write_TWI0_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val) -#define bfin_read_TWI0_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8) -#define bfin_write_TWI0_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val) -#define bfin_read_TWI0_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16) -#define bfin_write_TWI0_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val) -#define bfin_read_TWI0_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8) -#define bfin_write_TWI0_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val) -#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) -#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) - /* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ /* SPORT1 Registers */ @@ -323,7 +319,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_EBIU_DDRQUE() bfin_read32(EBIU_DDRQUE) #define bfin_write_EBIU_DDRQUE(val) bfin_write32(EBIU_DDRQUE, val) #define bfin_read_EBIU_ERRADD() bfin_read32(EBIU_ERRADD) -#define bfin_write_EBIU_ERRADD(val) bfin_write32(EBIU_ERRADD) +#define bfin_write_EBIU_ERRADD(val) bfin_write32(EBIU_ERRADD, val) #define bfin_read_EBIU_ERRMST() bfin_read16(EBIU_ERRMST) #define bfin_write_EBIU_ERRMST(val) bfin_write16(EBIU_ERRMST, val) #define bfin_read_EBIU_RSTCTL() bfin_read16(EBIU_RSTCTL) @@ -392,23 +388,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 0 Registers */ #define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) -#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) #define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) -#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) #define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) #define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) #define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) #define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) #define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) -#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) #define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) #define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) #define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) -#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) #define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) -#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) #define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) -#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) #define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) #define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) #define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) @@ -421,23 +417,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 1 Registers */ #define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) -#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) #define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) -#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) #define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) #define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) #define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) #define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) #define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) -#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) #define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) #define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) #define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) -#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) #define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) -#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) #define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) -#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) #define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) #define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) #define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) @@ -450,23 +446,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 2 Registers */ #define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) -#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) #define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) -#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) #define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) #define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) #define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) #define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) #define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) -#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) #define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) #define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) #define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) -#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) #define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) -#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) #define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) -#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) #define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) #define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) #define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) @@ -479,23 +475,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 3 Registers */ #define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) -#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) #define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) -#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) #define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) #define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) #define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) #define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) #define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) -#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) #define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) #define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) #define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) -#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) #define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) -#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) #define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) -#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) #define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) #define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) #define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) @@ -508,23 +504,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 4 Registers */ #define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) -#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) #define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) -#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) #define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) #define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) #define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) #define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) #define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) -#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) #define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) #define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) #define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) -#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) #define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) -#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) #define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) -#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) #define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) #define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) #define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) @@ -537,23 +533,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 5 Registers */ #define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) -#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) #define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) -#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) #define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) #define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) #define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) #define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) #define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) -#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) #define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) #define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) #define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) -#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) #define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) -#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) #define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) -#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) #define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) #define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) #define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) @@ -566,23 +562,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 6 Registers */ #define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) -#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) #define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) -#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) #define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) #define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) #define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) #define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) #define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) -#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) #define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) #define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) #define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) -#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) #define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) -#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) #define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) -#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) #define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) #define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) #define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) @@ -595,23 +591,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 7 Registers */ #define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) -#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) #define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) -#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) #define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) #define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) #define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) #define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) #define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) -#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) #define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) #define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) #define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) -#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) #define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) -#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) #define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) -#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) #define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) #define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) #define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) @@ -624,23 +620,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 8 Registers */ #define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) -#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) #define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) -#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) #define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) #define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) #define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) #define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) #define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) -#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) #define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) #define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) #define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) -#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) #define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) -#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) #define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) -#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) #define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) #define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) #define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) @@ -653,23 +649,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 9 Registers */ #define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) -#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) #define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) -#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) #define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) #define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) #define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) #define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) #define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) -#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) #define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) #define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) #define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) -#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) #define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) -#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) #define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) -#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) #define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) #define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) #define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) @@ -682,23 +678,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 10 Registers */ #define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) -#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) #define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) -#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) #define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) #define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) #define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) #define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) #define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) -#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) #define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) #define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) #define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) -#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) #define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) -#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) #define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) -#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) #define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) #define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) #define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) @@ -711,23 +707,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 11 Registers */ #define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) -#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) #define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) -#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) #define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) #define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) #define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) #define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) #define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) -#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) #define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) #define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) #define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) -#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) #define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) -#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) #define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) -#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) #define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) #define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) #define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) @@ -740,7 +736,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* MDMA Stream 0 Registers */ #define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) -#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val) #define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) #define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) #define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) @@ -803,11 +799,11 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) #define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) #define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) -#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) #define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) #define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) #define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) -#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) #define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) #define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) #define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) @@ -829,11 +825,11 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) #define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) #define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) -#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) #define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) #define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) #define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) -#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) #define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) #define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) #define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) @@ -1246,23 +1242,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 12 Registers */ #define bfin_read_DMA12_NEXT_DESC_PTR() bfin_read32(DMA12_NEXT_DESC_PTR) -#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_write32(DMA12_NEXT_DESC_PTR) +#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_write32(DMA12_NEXT_DESC_PTR, val) #define bfin_read_DMA12_START_ADDR() bfin_read32(DMA12_START_ADDR) -#define bfin_write_DMA12_START_ADDR(val) bfin_write32(DMA12_START_ADDR) +#define bfin_write_DMA12_START_ADDR(val) bfin_write32(DMA12_START_ADDR, val) #define bfin_read_DMA12_CONFIG() bfin_read16(DMA12_CONFIG) #define bfin_write_DMA12_CONFIG(val) bfin_write16(DMA12_CONFIG, val) #define bfin_read_DMA12_X_COUNT() bfin_read16(DMA12_X_COUNT) #define bfin_write_DMA12_X_COUNT(val) bfin_write16(DMA12_X_COUNT, val) #define bfin_read_DMA12_X_MODIFY() bfin_read16(DMA12_X_MODIFY) -#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY) +#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY, val) #define bfin_read_DMA12_Y_COUNT() bfin_read16(DMA12_Y_COUNT) #define bfin_write_DMA12_Y_COUNT(val) bfin_write16(DMA12_Y_COUNT, val) #define bfin_read_DMA12_Y_MODIFY() bfin_read16(DMA12_Y_MODIFY) -#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY) +#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY, val) #define bfin_read_DMA12_CURR_DESC_PTR() bfin_read32(DMA12_CURR_DESC_PTR) -#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_write32(DMA12_CURR_DESC_PTR) +#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_write32(DMA12_CURR_DESC_PTR, val) #define bfin_read_DMA12_CURR_ADDR() bfin_read32(DMA12_CURR_ADDR) -#define bfin_write_DMA12_CURR_ADDR(val) bfin_write32(DMA12_CURR_ADDR) +#define bfin_write_DMA12_CURR_ADDR(val) bfin_write32(DMA12_CURR_ADDR, val) #define bfin_read_DMA12_IRQ_STATUS() bfin_read16(DMA12_IRQ_STATUS) #define bfin_write_DMA12_IRQ_STATUS(val) bfin_write16(DMA12_IRQ_STATUS, val) #define bfin_read_DMA12_PERIPHERAL_MAP() bfin_read16(DMA12_PERIPHERAL_MAP) @@ -1275,23 +1271,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 13 Registers */ #define bfin_read_DMA13_NEXT_DESC_PTR() bfin_read32(DMA13_NEXT_DESC_PTR) -#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_write32(DMA13_NEXT_DESC_PTR) +#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_write32(DMA13_NEXT_DESC_PTR, val) #define bfin_read_DMA13_START_ADDR() bfin_read32(DMA13_START_ADDR) -#define bfin_write_DMA13_START_ADDR(val) bfin_write32(DMA13_START_ADDR) +#define bfin_write_DMA13_START_ADDR(val) bfin_write32(DMA13_START_ADDR, val) #define bfin_read_DMA13_CONFIG() bfin_read16(DMA13_CONFIG) #define bfin_write_DMA13_CONFIG(val) bfin_write16(DMA13_CONFIG, val) #define bfin_read_DMA13_X_COUNT() bfin_read16(DMA13_X_COUNT) #define bfin_write_DMA13_X_COUNT(val) bfin_write16(DMA13_X_COUNT, val) #define bfin_read_DMA13_X_MODIFY() bfin_read16(DMA13_X_MODIFY) -#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY) +#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY, val) #define bfin_read_DMA13_Y_COUNT() bfin_read16(DMA13_Y_COUNT) #define bfin_write_DMA13_Y_COUNT(val) bfin_write16(DMA13_Y_COUNT, val) #define bfin_read_DMA13_Y_MODIFY() bfin_read16(DMA13_Y_MODIFY) -#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY) +#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY, val) #define bfin_read_DMA13_CURR_DESC_PTR() bfin_read32(DMA13_CURR_DESC_PTR) -#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_write32(DMA13_CURR_DESC_PTR) +#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_write32(DMA13_CURR_DESC_PTR, val) #define bfin_read_DMA13_CURR_ADDR() bfin_read32(DMA13_CURR_ADDR) -#define bfin_write_DMA13_CURR_ADDR(val) bfin_write32(DMA13_CURR_ADDR) +#define bfin_write_DMA13_CURR_ADDR(val) bfin_write32(DMA13_CURR_ADDR, val) #define bfin_read_DMA13_IRQ_STATUS() bfin_read16(DMA13_IRQ_STATUS) #define bfin_write_DMA13_IRQ_STATUS(val) bfin_write16(DMA13_IRQ_STATUS, val) #define bfin_read_DMA13_PERIPHERAL_MAP() bfin_read16(DMA13_PERIPHERAL_MAP) @@ -1304,23 +1300,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 14 Registers */ #define bfin_read_DMA14_NEXT_DESC_PTR() bfin_read32(DMA14_NEXT_DESC_PTR) -#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_write32(DMA14_NEXT_DESC_PTR) +#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_write32(DMA14_NEXT_DESC_PTR, val) #define bfin_read_DMA14_START_ADDR() bfin_read32(DMA14_START_ADDR) -#define bfin_write_DMA14_START_ADDR(val) bfin_write32(DMA14_START_ADDR) +#define bfin_write_DMA14_START_ADDR(val) bfin_write32(DMA14_START_ADDR, val) #define bfin_read_DMA14_CONFIG() bfin_read16(DMA14_CONFIG) #define bfin_write_DMA14_CONFIG(val) bfin_write16(DMA14_CONFIG, val) #define bfin_read_DMA14_X_COUNT() bfin_read16(DMA14_X_COUNT) #define bfin_write_DMA14_X_COUNT(val) bfin_write16(DMA14_X_COUNT, val) #define bfin_read_DMA14_X_MODIFY() bfin_read16(DMA14_X_MODIFY) -#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY) +#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY, val) #define bfin_read_DMA14_Y_COUNT() bfin_read16(DMA14_Y_COUNT) #define bfin_write_DMA14_Y_COUNT(val) bfin_write16(DMA14_Y_COUNT, val) #define bfin_read_DMA14_Y_MODIFY() bfin_read16(DMA14_Y_MODIFY) -#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY) +#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY, val) #define bfin_read_DMA14_CURR_DESC_PTR() bfin_read32(DMA14_CURR_DESC_PTR) -#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_write32(DMA14_CURR_DESC_PTR) +#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_write32(DMA14_CURR_DESC_PTR, val) #define bfin_read_DMA14_CURR_ADDR() bfin_read32(DMA14_CURR_ADDR) -#define bfin_write_DMA14_CURR_ADDR(val) bfin_write32(DMA14_CURR_ADDR) +#define bfin_write_DMA14_CURR_ADDR(val) bfin_write32(DMA14_CURR_ADDR, val) #define bfin_read_DMA14_IRQ_STATUS() bfin_read16(DMA14_IRQ_STATUS) #define bfin_write_DMA14_IRQ_STATUS(val) bfin_write16(DMA14_IRQ_STATUS, val) #define bfin_read_DMA14_PERIPHERAL_MAP() bfin_read16(DMA14_PERIPHERAL_MAP) @@ -1333,23 +1329,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 15 Registers */ #define bfin_read_DMA15_NEXT_DESC_PTR() bfin_read32(DMA15_NEXT_DESC_PTR) -#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_write32(DMA15_NEXT_DESC_PTR) +#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_write32(DMA15_NEXT_DESC_PTR, val) #define bfin_read_DMA15_START_ADDR() bfin_read32(DMA15_START_ADDR) -#define bfin_write_DMA15_START_ADDR(val) bfin_write32(DMA15_START_ADDR) +#define bfin_write_DMA15_START_ADDR(val) bfin_write32(DMA15_START_ADDR, val) #define bfin_read_DMA15_CONFIG() bfin_read16(DMA15_CONFIG) #define bfin_write_DMA15_CONFIG(val) bfin_write16(DMA15_CONFIG, val) #define bfin_read_DMA15_X_COUNT() bfin_read16(DMA15_X_COUNT) #define bfin_write_DMA15_X_COUNT(val) bfin_write16(DMA15_X_COUNT, val) #define bfin_read_DMA15_X_MODIFY() bfin_read16(DMA15_X_MODIFY) -#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY) +#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY, val) #define bfin_read_DMA15_Y_COUNT() bfin_read16(DMA15_Y_COUNT) #define bfin_write_DMA15_Y_COUNT(val) bfin_write16(DMA15_Y_COUNT, val) #define bfin_read_DMA15_Y_MODIFY() bfin_read16(DMA15_Y_MODIFY) -#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY) +#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY, val) #define bfin_read_DMA15_CURR_DESC_PTR() bfin_read32(DMA15_CURR_DESC_PTR) -#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_write32(DMA15_CURR_DESC_PTR) +#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_write32(DMA15_CURR_DESC_PTR, val) #define bfin_read_DMA15_CURR_ADDR() bfin_read32(DMA15_CURR_ADDR) -#define bfin_write_DMA15_CURR_ADDR(val) bfin_write32(DMA15_CURR_ADDR) +#define bfin_write_DMA15_CURR_ADDR(val) bfin_write32(DMA15_CURR_ADDR, val) #define bfin_read_DMA15_IRQ_STATUS() bfin_read16(DMA15_IRQ_STATUS) #define bfin_write_DMA15_IRQ_STATUS(val) bfin_write16(DMA15_IRQ_STATUS, val) #define bfin_read_DMA15_PERIPHERAL_MAP() bfin_read16(DMA15_PERIPHERAL_MAP) @@ -1362,23 +1358,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 16 Registers */ #define bfin_read_DMA16_NEXT_DESC_PTR() bfin_read32(DMA16_NEXT_DESC_PTR) -#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_write32(DMA16_NEXT_DESC_PTR) +#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_write32(DMA16_NEXT_DESC_PTR, val) #define bfin_read_DMA16_START_ADDR() bfin_read32(DMA16_START_ADDR) -#define bfin_write_DMA16_START_ADDR(val) bfin_write32(DMA16_START_ADDR) +#define bfin_write_DMA16_START_ADDR(val) bfin_write32(DMA16_START_ADDR, val) #define bfin_read_DMA16_CONFIG() bfin_read16(DMA16_CONFIG) #define bfin_write_DMA16_CONFIG(val) bfin_write16(DMA16_CONFIG, val) #define bfin_read_DMA16_X_COUNT() bfin_read16(DMA16_X_COUNT) #define bfin_write_DMA16_X_COUNT(val) bfin_write16(DMA16_X_COUNT, val) #define bfin_read_DMA16_X_MODIFY() bfin_read16(DMA16_X_MODIFY) -#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY) +#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY, val) #define bfin_read_DMA16_Y_COUNT() bfin_read16(DMA16_Y_COUNT) #define bfin_write_DMA16_Y_COUNT(val) bfin_write16(DMA16_Y_COUNT, val) #define bfin_read_DMA16_Y_MODIFY() bfin_read16(DMA16_Y_MODIFY) -#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY) +#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY, val) #define bfin_read_DMA16_CURR_DESC_PTR() bfin_read32(DMA16_CURR_DESC_PTR) -#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_write32(DMA16_CURR_DESC_PTR) +#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_write32(DMA16_CURR_DESC_PTR, val) #define bfin_read_DMA16_CURR_ADDR() bfin_read32(DMA16_CURR_ADDR) -#define bfin_write_DMA16_CURR_ADDR(val) bfin_write32(DMA16_CURR_ADDR) +#define bfin_write_DMA16_CURR_ADDR(val) bfin_write32(DMA16_CURR_ADDR, val) #define bfin_read_DMA16_IRQ_STATUS() bfin_read16(DMA16_IRQ_STATUS) #define bfin_write_DMA16_IRQ_STATUS(val) bfin_write16(DMA16_IRQ_STATUS, val) #define bfin_read_DMA16_PERIPHERAL_MAP() bfin_read16(DMA16_PERIPHERAL_MAP) @@ -1391,23 +1387,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 17 Registers */ #define bfin_read_DMA17_NEXT_DESC_PTR() bfin_read32(DMA17_NEXT_DESC_PTR) -#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_write32(DMA17_NEXT_DESC_PTR) +#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_write32(DMA17_NEXT_DESC_PTR, val) #define bfin_read_DMA17_START_ADDR() bfin_read32(DMA17_START_ADDR) -#define bfin_write_DMA17_START_ADDR(val) bfin_write32(DMA17_START_ADDR) +#define bfin_write_DMA17_START_ADDR(val) bfin_write32(DMA17_START_ADDR, val) #define bfin_read_DMA17_CONFIG() bfin_read16(DMA17_CONFIG) #define bfin_write_DMA17_CONFIG(val) bfin_write16(DMA17_CONFIG, val) #define bfin_read_DMA17_X_COUNT() bfin_read16(DMA17_X_COUNT) #define bfin_write_DMA17_X_COUNT(val) bfin_write16(DMA17_X_COUNT, val) #define bfin_read_DMA17_X_MODIFY() bfin_read16(DMA17_X_MODIFY) -#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY) +#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY, val) #define bfin_read_DMA17_Y_COUNT() bfin_read16(DMA17_Y_COUNT) #define bfin_write_DMA17_Y_COUNT(val) bfin_write16(DMA17_Y_COUNT, val) #define bfin_read_DMA17_Y_MODIFY() bfin_read16(DMA17_Y_MODIFY) -#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY) +#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY, val) #define bfin_read_DMA17_CURR_DESC_PTR() bfin_read32(DMA17_CURR_DESC_PTR) -#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_write32(DMA17_CURR_DESC_PTR) +#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_write32(DMA17_CURR_DESC_PTR, val) #define bfin_read_DMA17_CURR_ADDR() bfin_read32(DMA17_CURR_ADDR) -#define bfin_write_DMA17_CURR_ADDR(val) bfin_write32(DMA17_CURR_ADDR) +#define bfin_write_DMA17_CURR_ADDR(val) bfin_write32(DMA17_CURR_ADDR, val) #define bfin_read_DMA17_IRQ_STATUS() bfin_read16(DMA17_IRQ_STATUS) #define bfin_write_DMA17_IRQ_STATUS(val) bfin_write16(DMA17_IRQ_STATUS, val) #define bfin_read_DMA17_PERIPHERAL_MAP() bfin_read16(DMA17_PERIPHERAL_MAP) @@ -1420,23 +1416,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 18 Registers */ #define bfin_read_DMA18_NEXT_DESC_PTR() bfin_read32(DMA18_NEXT_DESC_PTR) -#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_write32(DMA18_NEXT_DESC_PTR) +#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_write32(DMA18_NEXT_DESC_PTR, val) #define bfin_read_DMA18_START_ADDR() bfin_read32(DMA18_START_ADDR) -#define bfin_write_DMA18_START_ADDR(val) bfin_write32(DMA18_START_ADDR) +#define bfin_write_DMA18_START_ADDR(val) bfin_write32(DMA18_START_ADDR, val) #define bfin_read_DMA18_CONFIG() bfin_read16(DMA18_CONFIG) #define bfin_write_DMA18_CONFIG(val) bfin_write16(DMA18_CONFIG, val) #define bfin_read_DMA18_X_COUNT() bfin_read16(DMA18_X_COUNT) #define bfin_write_DMA18_X_COUNT(val) bfin_write16(DMA18_X_COUNT, val) #define bfin_read_DMA18_X_MODIFY() bfin_read16(DMA18_X_MODIFY) -#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY) +#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY, val) #define bfin_read_DMA18_Y_COUNT() bfin_read16(DMA18_Y_COUNT) #define bfin_write_DMA18_Y_COUNT(val) bfin_write16(DMA18_Y_COUNT, val) #define bfin_read_DMA18_Y_MODIFY() bfin_read16(DMA18_Y_MODIFY) -#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY) +#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY, val) #define bfin_read_DMA18_CURR_DESC_PTR() bfin_read32(DMA18_CURR_DESC_PTR) -#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_write32(DMA18_CURR_DESC_PTR) +#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_write32(DMA18_CURR_DESC_PTR, val) #define bfin_read_DMA18_CURR_ADDR() bfin_read32(DMA18_CURR_ADDR) -#define bfin_write_DMA18_CURR_ADDR(val) bfin_write32(DMA18_CURR_ADDR) +#define bfin_write_DMA18_CURR_ADDR(val) bfin_write32(DMA18_CURR_ADDR, val) #define bfin_read_DMA18_IRQ_STATUS() bfin_read16(DMA18_IRQ_STATUS) #define bfin_write_DMA18_IRQ_STATUS(val) bfin_write16(DMA18_IRQ_STATUS, val) #define bfin_read_DMA18_PERIPHERAL_MAP() bfin_read16(DMA18_PERIPHERAL_MAP) @@ -1449,23 +1445,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 19 Registers */ #define bfin_read_DMA19_NEXT_DESC_PTR() bfin_read32(DMA19_NEXT_DESC_PTR) -#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_write32(DMA19_NEXT_DESC_PTR) +#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_write32(DMA19_NEXT_DESC_PTR, val) #define bfin_read_DMA19_START_ADDR() bfin_read32(DMA19_START_ADDR) -#define bfin_write_DMA19_START_ADDR(val) bfin_write32(DMA19_START_ADDR) +#define bfin_write_DMA19_START_ADDR(val) bfin_write32(DMA19_START_ADDR, val) #define bfin_read_DMA19_CONFIG() bfin_read16(DMA19_CONFIG) #define bfin_write_DMA19_CONFIG(val) bfin_write16(DMA19_CONFIG, val) #define bfin_read_DMA19_X_COUNT() bfin_read16(DMA19_X_COUNT) #define bfin_write_DMA19_X_COUNT(val) bfin_write16(DMA19_X_COUNT, val) #define bfin_read_DMA19_X_MODIFY() bfin_read16(DMA19_X_MODIFY) -#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY) +#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY, val) #define bfin_read_DMA19_Y_COUNT() bfin_read16(DMA19_Y_COUNT) #define bfin_write_DMA19_Y_COUNT(val) bfin_write16(DMA19_Y_COUNT, val) #define bfin_read_DMA19_Y_MODIFY() bfin_read16(DMA19_Y_MODIFY) -#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY) +#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY, val) #define bfin_read_DMA19_CURR_DESC_PTR() bfin_read32(DMA19_CURR_DESC_PTR) -#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_write32(DMA19_CURR_DESC_PTR) +#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_write32(DMA19_CURR_DESC_PTR, val) #define bfin_read_DMA19_CURR_ADDR() bfin_read32(DMA19_CURR_ADDR) -#define bfin_write_DMA19_CURR_ADDR(val) bfin_write32(DMA19_CURR_ADDR) +#define bfin_write_DMA19_CURR_ADDR(val) bfin_write32(DMA19_CURR_ADDR, val) #define bfin_read_DMA19_IRQ_STATUS() bfin_read16(DMA19_IRQ_STATUS) #define bfin_write_DMA19_IRQ_STATUS(val) bfin_write16(DMA19_IRQ_STATUS, val) #define bfin_read_DMA19_PERIPHERAL_MAP() bfin_read16(DMA19_PERIPHERAL_MAP) @@ -1478,23 +1474,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 20 Registers */ #define bfin_read_DMA20_NEXT_DESC_PTR() bfin_read32(DMA20_NEXT_DESC_PTR) -#define bfin_write_DMA20_NEXT_DESC_PTR(val) bfin_write32(DMA20_NEXT_DESC_PTR) +#define bfin_write_DMA20_NEXT_DESC_PTR(val) bfin_write32(DMA20_NEXT_DESC_PTR, val) #define bfin_read_DMA20_START_ADDR() bfin_read32(DMA20_START_ADDR) -#define bfin_write_DMA20_START_ADDR(val) bfin_write32(DMA20_START_ADDR) +#define bfin_write_DMA20_START_ADDR(val) bfin_write32(DMA20_START_ADDR, val) #define bfin_read_DMA20_CONFIG() bfin_read16(DMA20_CONFIG) #define bfin_write_DMA20_CONFIG(val) bfin_write16(DMA20_CONFIG, val) #define bfin_read_DMA20_X_COUNT() bfin_read16(DMA20_X_COUNT) #define bfin_write_DMA20_X_COUNT(val) bfin_write16(DMA20_X_COUNT, val) #define bfin_read_DMA20_X_MODIFY() bfin_read16(DMA20_X_MODIFY) -#define bfin_write_DMA20_X_MODIFY(val) bfin_write16(DMA20_X_MODIFY) +#define bfin_write_DMA20_X_MODIFY(val) bfin_write16(DMA20_X_MODIFY, val) #define bfin_read_DMA20_Y_COUNT() bfin_read16(DMA20_Y_COUNT) #define bfin_write_DMA20_Y_COUNT(val) bfin_write16(DMA20_Y_COUNT, val) #define bfin_read_DMA20_Y_MODIFY() bfin_read16(DMA20_Y_MODIFY) -#define bfin_write_DMA20_Y_MODIFY(val) bfin_write16(DMA20_Y_MODIFY) +#define bfin_write_DMA20_Y_MODIFY(val) bfin_write16(DMA20_Y_MODIFY, val) #define bfin_read_DMA20_CURR_DESC_PTR() bfin_read32(DMA20_CURR_DESC_PTR) -#define bfin_write_DMA20_CURR_DESC_PTR(val) bfin_write32(DMA20_CURR_DESC_PTR) +#define bfin_write_DMA20_CURR_DESC_PTR(val) bfin_write32(DMA20_CURR_DESC_PTR, val) #define bfin_read_DMA20_CURR_ADDR() bfin_read32(DMA20_CURR_ADDR) -#define bfin_write_DMA20_CURR_ADDR(val) bfin_write32(DMA20_CURR_ADDR) +#define bfin_write_DMA20_CURR_ADDR(val) bfin_write32(DMA20_CURR_ADDR, val) #define bfin_read_DMA20_IRQ_STATUS() bfin_read16(DMA20_IRQ_STATUS) #define bfin_write_DMA20_IRQ_STATUS(val) bfin_write16(DMA20_IRQ_STATUS, val) #define bfin_read_DMA20_PERIPHERAL_MAP() bfin_read16(DMA20_PERIPHERAL_MAP) @@ -1507,23 +1503,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 21 Registers */ #define bfin_read_DMA21_NEXT_DESC_PTR() bfin_read32(DMA21_NEXT_DESC_PTR) -#define bfin_write_DMA21_NEXT_DESC_PTR(val) bfin_write32(DMA21_NEXT_DESC_PTR) +#define bfin_write_DMA21_NEXT_DESC_PTR(val) bfin_write32(DMA21_NEXT_DESC_PTR, val) #define bfin_read_DMA21_START_ADDR() bfin_read32(DMA21_START_ADDR) -#define bfin_write_DMA21_START_ADDR(val) bfin_write32(DMA21_START_ADDR) +#define bfin_write_DMA21_START_ADDR(val) bfin_write32(DMA21_START_ADDR, val) #define bfin_read_DMA21_CONFIG() bfin_read16(DMA21_CONFIG) #define bfin_write_DMA21_CONFIG(val) bfin_write16(DMA21_CONFIG, val) #define bfin_read_DMA21_X_COUNT() bfin_read16(DMA21_X_COUNT) #define bfin_write_DMA21_X_COUNT(val) bfin_write16(DMA21_X_COUNT, val) #define bfin_read_DMA21_X_MODIFY() bfin_read16(DMA21_X_MODIFY) -#define bfin_write_DMA21_X_MODIFY(val) bfin_write16(DMA21_X_MODIFY) +#define bfin_write_DMA21_X_MODIFY(val) bfin_write16(DMA21_X_MODIFY, val) #define bfin_read_DMA21_Y_COUNT() bfin_read16(DMA21_Y_COUNT) #define bfin_write_DMA21_Y_COUNT(val) bfin_write16(DMA21_Y_COUNT, val) #define bfin_read_DMA21_Y_MODIFY() bfin_read16(DMA21_Y_MODIFY) -#define bfin_write_DMA21_Y_MODIFY(val) bfin_write16(DMA21_Y_MODIFY) +#define bfin_write_DMA21_Y_MODIFY(val) bfin_write16(DMA21_Y_MODIFY, val) #define bfin_read_DMA21_CURR_DESC_PTR() bfin_read32(DMA21_CURR_DESC_PTR) -#define bfin_write_DMA21_CURR_DESC_PTR(val) bfin_write32(DMA21_CURR_DESC_PTR) +#define bfin_write_DMA21_CURR_DESC_PTR(val) bfin_write32(DMA21_CURR_DESC_PTR, val) #define bfin_read_DMA21_CURR_ADDR() bfin_read32(DMA21_CURR_ADDR) -#define bfin_write_DMA21_CURR_ADDR(val) bfin_write32(DMA21_CURR_ADDR) +#define bfin_write_DMA21_CURR_ADDR(val) bfin_write32(DMA21_CURR_ADDR, val) #define bfin_read_DMA21_IRQ_STATUS() bfin_read16(DMA21_IRQ_STATUS) #define bfin_write_DMA21_IRQ_STATUS(val) bfin_write16(DMA21_IRQ_STATUS, val) #define bfin_read_DMA21_PERIPHERAL_MAP() bfin_read16(DMA21_PERIPHERAL_MAP) @@ -1536,23 +1532,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 22 Registers */ #define bfin_read_DMA22_NEXT_DESC_PTR() bfin_read32(DMA22_NEXT_DESC_PTR) -#define bfin_write_DMA22_NEXT_DESC_PTR(val) bfin_write32(DMA22_NEXT_DESC_PTR) +#define bfin_write_DMA22_NEXT_DESC_PTR(val) bfin_write32(DMA22_NEXT_DESC_PTR, val) #define bfin_read_DMA22_START_ADDR() bfin_read32(DMA22_START_ADDR) -#define bfin_write_DMA22_START_ADDR(val) bfin_write32(DMA22_START_ADDR) +#define bfin_write_DMA22_START_ADDR(val) bfin_write32(DMA22_START_ADDR, val) #define bfin_read_DMA22_CONFIG() bfin_read16(DMA22_CONFIG) #define bfin_write_DMA22_CONFIG(val) bfin_write16(DMA22_CONFIG, val) #define bfin_read_DMA22_X_COUNT() bfin_read16(DMA22_X_COUNT) #define bfin_write_DMA22_X_COUNT(val) bfin_write16(DMA22_X_COUNT, val) #define bfin_read_DMA22_X_MODIFY() bfin_read16(DMA22_X_MODIFY) -#define bfin_write_DMA22_X_MODIFY(val) bfin_write16(DMA22_X_MODIFY) +#define bfin_write_DMA22_X_MODIFY(val) bfin_write16(DMA22_X_MODIFY, val) #define bfin_read_DMA22_Y_COUNT() bfin_read16(DMA22_Y_COUNT) #define bfin_write_DMA22_Y_COUNT(val) bfin_write16(DMA22_Y_COUNT, val) #define bfin_read_DMA22_Y_MODIFY() bfin_read16(DMA22_Y_MODIFY) -#define bfin_write_DMA22_Y_MODIFY(val) bfin_write16(DMA22_Y_MODIFY) +#define bfin_write_DMA22_Y_MODIFY(val) bfin_write16(DMA22_Y_MODIFY, val) #define bfin_read_DMA22_CURR_DESC_PTR() bfin_read32(DMA22_CURR_DESC_PTR) -#define bfin_write_DMA22_CURR_DESC_PTR(val) bfin_write32(DMA22_CURR_DESC_PTR) +#define bfin_write_DMA22_CURR_DESC_PTR(val) bfin_write32(DMA22_CURR_DESC_PTR, val) #define bfin_read_DMA22_CURR_ADDR() bfin_read32(DMA22_CURR_ADDR) -#define bfin_write_DMA22_CURR_ADDR(val) bfin_write32(DMA22_CURR_ADDR) +#define bfin_write_DMA22_CURR_ADDR(val) bfin_write32(DMA22_CURR_ADDR, val) #define bfin_read_DMA22_IRQ_STATUS() bfin_read16(DMA22_IRQ_STATUS) #define bfin_write_DMA22_IRQ_STATUS(val) bfin_write16(DMA22_IRQ_STATUS, val) #define bfin_read_DMA22_PERIPHERAL_MAP() bfin_read16(DMA22_PERIPHERAL_MAP) @@ -1565,23 +1561,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 23 Registers */ #define bfin_read_DMA23_NEXT_DESC_PTR() bfin_read32(DMA23_NEXT_DESC_PTR) -#define bfin_write_DMA23_NEXT_DESC_PTR(val) bfin_write32(DMA23_NEXT_DESC_PTR) +#define bfin_write_DMA23_NEXT_DESC_PTR(val) bfin_write32(DMA23_NEXT_DESC_PTR, val) #define bfin_read_DMA23_START_ADDR() bfin_read32(DMA23_START_ADDR) -#define bfin_write_DMA23_START_ADDR(val) bfin_write32(DMA23_START_ADDR) +#define bfin_write_DMA23_START_ADDR(val) bfin_write32(DMA23_START_ADDR, val) #define bfin_read_DMA23_CONFIG() bfin_read16(DMA23_CONFIG) #define bfin_write_DMA23_CONFIG(val) bfin_write16(DMA23_CONFIG, val) #define bfin_read_DMA23_X_COUNT() bfin_read16(DMA23_X_COUNT) #define bfin_write_DMA23_X_COUNT(val) bfin_write16(DMA23_X_COUNT, val) #define bfin_read_DMA23_X_MODIFY() bfin_read16(DMA23_X_MODIFY) -#define bfin_write_DMA23_X_MODIFY(val) bfin_write16(DMA23_X_MODIFY) +#define bfin_write_DMA23_X_MODIFY(val) bfin_write16(DMA23_X_MODIFY, val) #define bfin_read_DMA23_Y_COUNT() bfin_read16(DMA23_Y_COUNT) #define bfin_write_DMA23_Y_COUNT(val) bfin_write16(DMA23_Y_COUNT, val) #define bfin_read_DMA23_Y_MODIFY() bfin_read16(DMA23_Y_MODIFY) -#define bfin_write_DMA23_Y_MODIFY(val) bfin_write16(DMA23_Y_MODIFY) +#define bfin_write_DMA23_Y_MODIFY(val) bfin_write16(DMA23_Y_MODIFY, val) #define bfin_read_DMA23_CURR_DESC_PTR() bfin_read32(DMA23_CURR_DESC_PTR) -#define bfin_write_DMA23_CURR_DESC_PTR(val) bfin_write32(DMA23_CURR_DESC_PTR) +#define bfin_write_DMA23_CURR_DESC_PTR(val) bfin_write32(DMA23_CURR_DESC_PTR, val) #define bfin_read_DMA23_CURR_ADDR() bfin_read32(DMA23_CURR_ADDR) -#define bfin_write_DMA23_CURR_ADDR(val) bfin_write32(DMA23_CURR_ADDR) +#define bfin_write_DMA23_CURR_ADDR(val) bfin_write32(DMA23_CURR_ADDR, val) #define bfin_read_DMA23_IRQ_STATUS() bfin_read16(DMA23_IRQ_STATUS) #define bfin_write_DMA23_IRQ_STATUS(val) bfin_write16(DMA23_IRQ_STATUS, val) #define bfin_read_DMA23_PERIPHERAL_MAP() bfin_read16(DMA23_PERIPHERAL_MAP) @@ -1594,23 +1590,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* MDMA Stream 2 Registers */ #define bfin_read_MDMA_D2_NEXT_DESC_PTR() bfin_read32(MDMA_D2_NEXT_DESC_PTR) -#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_write32(MDMA_D2_NEXT_DESC_PTR) +#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_write32(MDMA_D2_NEXT_DESC_PTR, val) #define bfin_read_MDMA_D2_START_ADDR() bfin_read32(MDMA_D2_START_ADDR) -#define bfin_write_MDMA_D2_START_ADDR(val) bfin_write32(MDMA_D2_START_ADDR) +#define bfin_write_MDMA_D2_START_ADDR(val) bfin_write32(MDMA_D2_START_ADDR, val) #define bfin_read_MDMA_D2_CONFIG() bfin_read16(MDMA_D2_CONFIG) #define bfin_write_MDMA_D2_CONFIG(val) bfin_write16(MDMA_D2_CONFIG, val) #define bfin_read_MDMA_D2_X_COUNT() bfin_read16(MDMA_D2_X_COUNT) #define bfin_write_MDMA_D2_X_COUNT(val) bfin_write16(MDMA_D2_X_COUNT, val) #define bfin_read_MDMA_D2_X_MODIFY() bfin_read16(MDMA_D2_X_MODIFY) -#define bfin_write_MDMA_D2_X_MODIFY(val) bfin_write16(MDMA_D2_X_MODIFY) +#define bfin_write_MDMA_D2_X_MODIFY(val) bfin_write16(MDMA_D2_X_MODIFY, val) #define bfin_read_MDMA_D2_Y_COUNT() bfin_read16(MDMA_D2_Y_COUNT) #define bfin_write_MDMA_D2_Y_COUNT(val) bfin_write16(MDMA_D2_Y_COUNT, val) #define bfin_read_MDMA_D2_Y_MODIFY() bfin_read16(MDMA_D2_Y_MODIFY) -#define bfin_write_MDMA_D2_Y_MODIFY(val) bfin_write16(MDMA_D2_Y_MODIFY) +#define bfin_write_MDMA_D2_Y_MODIFY(val) bfin_write16(MDMA_D2_Y_MODIFY, val) #define bfin_read_MDMA_D2_CURR_DESC_PTR() bfin_read32(MDMA_D2_CURR_DESC_PTR) -#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_write32(MDMA_D2_CURR_DESC_PTR) +#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_write32(MDMA_D2_CURR_DESC_PTR, val) #define bfin_read_MDMA_D2_CURR_ADDR() bfin_read32(MDMA_D2_CURR_ADDR) -#define bfin_write_MDMA_D2_CURR_ADDR(val) bfin_write32(MDMA_D2_CURR_ADDR) +#define bfin_write_MDMA_D2_CURR_ADDR(val) bfin_write32(MDMA_D2_CURR_ADDR, val) #define bfin_read_MDMA_D2_IRQ_STATUS() bfin_read16(MDMA_D2_IRQ_STATUS) #define bfin_write_MDMA_D2_IRQ_STATUS(val) bfin_write16(MDMA_D2_IRQ_STATUS, val) #define bfin_read_MDMA_D2_PERIPHERAL_MAP() bfin_read16(MDMA_D2_PERIPHERAL_MAP) @@ -1620,23 +1616,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_D2_CURR_Y_COUNT() bfin_read16(MDMA_D2_CURR_Y_COUNT) #define bfin_write_MDMA_D2_CURR_Y_COUNT(val) bfin_write16(MDMA_D2_CURR_Y_COUNT, val) #define bfin_read_MDMA_S2_NEXT_DESC_PTR() bfin_read32(MDMA_S2_NEXT_DESC_PTR) -#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_write32(MDMA_S2_NEXT_DESC_PTR) +#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_write32(MDMA_S2_NEXT_DESC_PTR, val) #define bfin_read_MDMA_S2_START_ADDR() bfin_read32(MDMA_S2_START_ADDR) -#define bfin_write_MDMA_S2_START_ADDR(val) bfin_write32(MDMA_S2_START_ADDR) +#define bfin_write_MDMA_S2_START_ADDR(val) bfin_write32(MDMA_S2_START_ADDR, val) #define bfin_read_MDMA_S2_CONFIG() bfin_read16(MDMA_S2_CONFIG) #define bfin_write_MDMA_S2_CONFIG(val) bfin_write16(MDMA_S2_CONFIG, val) #define bfin_read_MDMA_S2_X_COUNT() bfin_read16(MDMA_S2_X_COUNT) #define bfin_write_MDMA_S2_X_COUNT(val) bfin_write16(MDMA_S2_X_COUNT, val) #define bfin_read_MDMA_S2_X_MODIFY() bfin_read16(MDMA_S2_X_MODIFY) -#define bfin_write_MDMA_S2_X_MODIFY(val) bfin_write16(MDMA_S2_X_MODIFY) +#define bfin_write_MDMA_S2_X_MODIFY(val) bfin_write16(MDMA_S2_X_MODIFY, val) #define bfin_read_MDMA_S2_Y_COUNT() bfin_read16(MDMA_S2_Y_COUNT) #define bfin_write_MDMA_S2_Y_COUNT(val) bfin_write16(MDMA_S2_Y_COUNT, val) #define bfin_read_MDMA_S2_Y_MODIFY() bfin_read16(MDMA_S2_Y_MODIFY) -#define bfin_write_MDMA_S2_Y_MODIFY(val) bfin_write16(MDMA_S2_Y_MODIFY) +#define bfin_write_MDMA_S2_Y_MODIFY(val) bfin_write16(MDMA_S2_Y_MODIFY, val) #define bfin_read_MDMA_S2_CURR_DESC_PTR() bfin_read32(MDMA_S2_CURR_DESC_PTR) -#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_write32(MDMA_S2_CURR_DESC_PTR) +#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_write32(MDMA_S2_CURR_DESC_PTR, val) #define bfin_read_MDMA_S2_CURR_ADDR() bfin_read32(MDMA_S2_CURR_ADDR) -#define bfin_write_MDMA_S2_CURR_ADDR(val) bfin_write32(MDMA_S2_CURR_ADDR) +#define bfin_write_MDMA_S2_CURR_ADDR(val) bfin_write32(MDMA_S2_CURR_ADDR, val) #define bfin_read_MDMA_S2_IRQ_STATUS() bfin_read16(MDMA_S2_IRQ_STATUS) #define bfin_write_MDMA_S2_IRQ_STATUS(val) bfin_write16(MDMA_S2_IRQ_STATUS, val) #define bfin_read_MDMA_S2_PERIPHERAL_MAP() bfin_read16(MDMA_S2_PERIPHERAL_MAP) @@ -1649,23 +1645,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* MDMA Stream 3 Registers */ #define bfin_read_MDMA_D3_NEXT_DESC_PTR() bfin_read32(MDMA_D3_NEXT_DESC_PTR) -#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_write32(MDMA_D3_NEXT_DESC_PTR) +#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_write32(MDMA_D3_NEXT_DESC_PTR, val) #define bfin_read_MDMA_D3_START_ADDR() bfin_read32(MDMA_D3_START_ADDR) -#define bfin_write_MDMA_D3_START_ADDR(val) bfin_write32(MDMA_D3_START_ADDR) +#define bfin_write_MDMA_D3_START_ADDR(val) bfin_write32(MDMA_D3_START_ADDR, val) #define bfin_read_MDMA_D3_CONFIG() bfin_read16(MDMA_D3_CONFIG) #define bfin_write_MDMA_D3_CONFIG(val) bfin_write16(MDMA_D3_CONFIG, val) #define bfin_read_MDMA_D3_X_COUNT() bfin_read16(MDMA_D3_X_COUNT) #define bfin_write_MDMA_D3_X_COUNT(val) bfin_write16(MDMA_D3_X_COUNT, val) #define bfin_read_MDMA_D3_X_MODIFY() bfin_read16(MDMA_D3_X_MODIFY) -#define bfin_write_MDMA_D3_X_MODIFY(val) bfin_write16(MDMA_D3_X_MODIFY) +#define bfin_write_MDMA_D3_X_MODIFY(val) bfin_write16(MDMA_D3_X_MODIFY, val) #define bfin_read_MDMA_D3_Y_COUNT() bfin_read16(MDMA_D3_Y_COUNT) #define bfin_write_MDMA_D3_Y_COUNT(val) bfin_write16(MDMA_D3_Y_COUNT, val) #define bfin_read_MDMA_D3_Y_MODIFY() bfin_read16(MDMA_D3_Y_MODIFY) -#define bfin_write_MDMA_D3_Y_MODIFY(val) bfin_write16(MDMA_D3_Y_MODIFY) +#define bfin_write_MDMA_D3_Y_MODIFY(val) bfin_write16(MDMA_D3_Y_MODIFY, val) #define bfin_read_MDMA_D3_CURR_DESC_PTR() bfin_read32(MDMA_D3_CURR_DESC_PTR) -#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_write32(MDMA_D3_CURR_DESC_PTR) +#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_write32(MDMA_D3_CURR_DESC_PTR, val) #define bfin_read_MDMA_D3_CURR_ADDR() bfin_read32(MDMA_D3_CURR_ADDR) -#define bfin_write_MDMA_D3_CURR_ADDR(val) bfin_write32(MDMA_D3_CURR_ADDR) +#define bfin_write_MDMA_D3_CURR_ADDR(val) bfin_write32(MDMA_D3_CURR_ADDR, val) #define bfin_read_MDMA_D3_IRQ_STATUS() bfin_read16(MDMA_D3_IRQ_STATUS) #define bfin_write_MDMA_D3_IRQ_STATUS(val) bfin_write16(MDMA_D3_IRQ_STATUS, val) #define bfin_read_MDMA_D3_PERIPHERAL_MAP() bfin_read16(MDMA_D3_PERIPHERAL_MAP) @@ -1675,23 +1671,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_D3_CURR_Y_COUNT() bfin_read16(MDMA_D3_CURR_Y_COUNT) #define bfin_write_MDMA_D3_CURR_Y_COUNT(val) bfin_write16(MDMA_D3_CURR_Y_COUNT, val) #define bfin_read_MDMA_S3_NEXT_DESC_PTR() bfin_read32(MDMA_S3_NEXT_DESC_PTR) -#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_write32(MDMA_S3_NEXT_DESC_PTR) +#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_write32(MDMA_S3_NEXT_DESC_PTR, val) #define bfin_read_MDMA_S3_START_ADDR() bfin_read32(MDMA_S3_START_ADDR) -#define bfin_write_MDMA_S3_START_ADDR(val) bfin_write32(MDMA_S3_START_ADDR) +#define bfin_write_MDMA_S3_START_ADDR(val) bfin_write32(MDMA_S3_START_ADDR, val) #define bfin_read_MDMA_S3_CONFIG() bfin_read16(MDMA_S3_CONFIG) #define bfin_write_MDMA_S3_CONFIG(val) bfin_write16(MDMA_S3_CONFIG, val) #define bfin_read_MDMA_S3_X_COUNT() bfin_read16(MDMA_S3_X_COUNT) #define bfin_write_MDMA_S3_X_COUNT(val) bfin_write16(MDMA_S3_X_COUNT, val) #define bfin_read_MDMA_S3_X_MODIFY() bfin_read16(MDMA_S3_X_MODIFY) -#define bfin_write_MDMA_S3_X_MODIFY(val) bfin_write16(MDMA_S3_X_MODIFY) +#define bfin_write_MDMA_S3_X_MODIFY(val) bfin_write16(MDMA_S3_X_MODIFY, val) #define bfin_read_MDMA_S3_Y_COUNT() bfin_read16(MDMA_S3_Y_COUNT) #define bfin_write_MDMA_S3_Y_COUNT(val) bfin_write16(MDMA_S3_Y_COUNT, val) #define bfin_read_MDMA_S3_Y_MODIFY() bfin_read16(MDMA_S3_Y_MODIFY) -#define bfin_write_MDMA_S3_Y_MODIFY(val) bfin_write16(MDMA_S3_Y_MODIFY) +#define bfin_write_MDMA_S3_Y_MODIFY(val) bfin_write16(MDMA_S3_Y_MODIFY, val) #define bfin_read_MDMA_S3_CURR_DESC_PTR() bfin_read32(MDMA_S3_CURR_DESC_PTR) -#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_write32(MDMA_S3_CURR_DESC_PTR) +#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_write32(MDMA_S3_CURR_DESC_PTR, val) #define bfin_read_MDMA_S3_CURR_ADDR() bfin_read32(MDMA_S3_CURR_ADDR) -#define bfin_write_MDMA_S3_CURR_ADDR(val) bfin_write32(MDMA_S3_CURR_ADDR) +#define bfin_write_MDMA_S3_CURR_ADDR(val) bfin_write32(MDMA_S3_CURR_ADDR, val) #define bfin_read_MDMA_S3_IRQ_STATUS() bfin_read16(MDMA_S3_IRQ_STATUS) #define bfin_write_MDMA_S3_IRQ_STATUS(val) bfin_write16(MDMA_S3_IRQ_STATUS, val) #define bfin_read_MDMA_S3_PERIPHERAL_MAP() bfin_read16(MDMA_S3_PERIPHERAL_MAP) diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h index 46ff31f20ae..36a2ef7e784 100644 --- a/include/asm-blackfin/mach-bf548/dma.h +++ b/include/asm-blackfin/mach-bf548/dma.h @@ -73,6 +73,4 @@ #define MAX_BLACKFIN_DMA_CHANNEL 32 -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL]; #endif diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h index befc2903d5a..ab0b863eee6 100644 --- a/include/asm-blackfin/mach-bf548/mem_init.h +++ b/include/asm-blackfin/mach-bf548/mem_init.h @@ -29,16 +29,19 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1) +#define MAX_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000) +#define DDR_CLK_HZ(x) (1000*1000*1000/x) #if (CONFIG_MEM_MT46V32M16_6T) #define DDR_SIZE DEVSZ_512 #define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 #define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60)) #define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42)) #define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) #define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72)) -#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) #define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) #define DDR_tWTR DDR_TWTR(1) @@ -49,12 +52,13 @@ #if (CONFIG_MEM_MT46V32M16_5B) #define DDR_SIZE DEVSZ_512 #define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 #define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55)) #define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40)) #define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) #define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70)) -#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) #define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) #define DDR_tWTR DDR_TWTR(2) @@ -65,6 +69,7 @@ #if (CONFIG_MEM_GENERIC_BOARD) #define DDR_SIZE DEVSZ_512 #define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 #define DDR_tRCD DDR_TRCD(3) #define DDR_tWTR DDR_TWTR(2) @@ -77,14 +82,15 @@ #define DDR_tREFI DDR_TREFI(1288) #endif -#if (CONFIG_SCLK_HZ <= 133333333) -#define DDR_CL CL_2 -#elif (CONFIG_SCLK_HZ <= 166666666) -#define DDR_CL CL_2_5 +#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK)) +# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)." +#elif(CONFIG_SCLK_HZ <= 133333333) +# define DDR_CL CL_2 #else -#define DDR_CL CL_3 +# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)." #endif + #define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI) #define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \ | DDR_tMRD | DDR_tWR | DDR_tRCD) diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index 0c1d4619393..82157caa96a 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision O, 11/15/2007; ADSP-BF561 Blackfin Processor Anomaly List + * - Revision P, 02/08/2008; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -256,10 +256,14 @@ #define ANOMALY_05000357 (1) /* Conflicting Column Address Widths Causes SDRAM Errors */ #define ANOMALY_05000362 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000158 (0) diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index b6f513bee56..8a4e66d1db3 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf561/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 1 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -84,7 +100,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; @@ -115,7 +131,7 @@ struct bfin_serial_res bfin_serial_resource[] = { #define DRIVER_NAME "bfin-uart" -int nr_ports = NR_PORTS; +int nr_ports = BFIN_UART_NR_PORTS; static void bfin_serial_hw_init(struct bfin_serial_port *uart) { diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/include/asm-blackfin/mach-bf561/bfin_sir.h new file mode 100644 index 00000000000..cefcf8bb505 --- /dev/null +++ b/include/asm-blackfin/mach-bf561/bfin_sir.h @@ -0,0 +1,120 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART_RX, + CH_UART_RX, + CH_UART_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h index 3a16df2c86d..0ea8666e676 100644 --- a/include/asm-blackfin/mach-bf561/blackfin.h +++ b/include/asm-blackfin/mach-bf561/blackfin.h @@ -69,5 +69,19 @@ #define bfin_read_SIC_ISR(x) bfin_read32(SICA_ISR0 + (x << 2)) #define bfin_write_SIC_ISR(x, val) bfin_write32((SICA_ISR0 + (x << 2)), val) +#define BFIN_UART_NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ #endif /* _MACH_BLACKFIN_H_ */ diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h index 1bc8d2f89cc..b07ffccd66d 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -47,7 +47,30 @@ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) @@ -56,6 +79,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr0, iwr1; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr0 = bfin_read32(SICA_IWR0); iwr1 = bfin_read32(SICA_IWR1); @@ -65,12 +92,11 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SICA_IWR0, iwr0); bfin_write32(SICA_IWR1, iwr1); + local_irq_restore(flags); } #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index c3c0eb13c81..366c9b9a0cb 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -110,18 +110,23 @@ #define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ /* UART Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART_THR 0xFFC00400 /* Transmit Holding register */ -#define UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART_LCR 0xFFC0040C /* Line Control Register */ -#define UART_MCR 0xFFC00410 /* Modem Control Register */ -#define UART_LSR 0xFFC00414 /* Line Status Register */ -#define UART_MSR 0xFFC00418 /* Modem Status Register */ -#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART0_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI0_REGBASE 0xFFC00500 @@ -866,6 +871,8 @@ /* PLL_DIV Masks */ #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ +#define CSEL 0x30 /* Core Select */ +#define SSEL 0xf /* System Select */ #define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ #define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h index 766334b7d8a..21d982003e7 100644 --- a/include/asm-blackfin/mach-bf561/dma.h +++ b/include/asm-blackfin/mach-bf561/dma.h @@ -32,7 +32,4 @@ #define CH_IMEM_STREAM1_SRC 34 #define CH_IMEM_STREAM1_DEST 35 -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/portmux.h b/include/asm-blackfin/portmux.h index 0d3f650d2d9..0807b286cd9 100644 --- a/include/asm-blackfin/portmux.h +++ b/include/asm-blackfin/portmux.h @@ -17,8 +17,8 @@ int peripheral_request(unsigned short per, const char *label); void peripheral_free(unsigned short per); -int peripheral_request_list(unsigned short per[], const char *label); -void peripheral_free_list(unsigned short per[]); +int peripheral_request_list(const unsigned short per[], const char *label); +void peripheral_free_list(const unsigned short per[]); #include <asm/gpio.h> #include <asm/mach/portmux.h> diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index 1033e5c7601..1c004072461 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -26,9 +26,10 @@ static inline void wrusp(unsigned long usp) /* * User space process size: 1st byte beyond user address space. + * Fairly meaningless on nommu. Parts of user programs can be scattered + * in a lot of places, so just disable this by setting it to 0xFFFFFFFF. */ -extern unsigned long memory_end; -#define TASK_SIZE (memory_end) +#define TASK_SIZE 0xFFFFFFFF #ifdef __KERNEL__ #define STACK_TOP TASK_SIZE diff --git a/include/asm-blackfin/signal.h b/include/asm-blackfin/signal.h index 0250429b736..87951d25145 100644 --- a/include/asm-blackfin/signal.h +++ b/include/asm-blackfin/signal.h @@ -143,7 +143,7 @@ struct sigaction { #endif /* __KERNEL__ */ typedef struct sigaltstack { - void *ss_sp; + void __user *ss_sp; int ss_flags; size_t ss_size; } stack_t; diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h index 15b99cf4f50..bc2fe5accf2 100644 --- a/include/asm-blackfin/thread_info.h +++ b/include/asm-blackfin/thread_info.h @@ -81,14 +81,11 @@ struct thread_info { #define init_thread_info (init_thread_union.thread_info) #define init_stack (init_thread_union.stack) -/* How to get the thread information struct from C */ - -static inline struct thread_info *current_thread_info(void) - __attribute__ ((__const__)); - -/* Given a task stack pointer, you can find it's task structure - * just by masking it to the 8K boundary. +/* Given a task stack pointer, you can find its corresponding + * thread_info structure just by masking it to the THREAD_SIZE + * boundary (currently 8K as you can see above). */ +__attribute_const__ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; diff --git a/include/asm-blackfin/time.h b/include/asm-blackfin/time.h new file mode 100644 index 00000000000..6e5859b6ea3 --- /dev/null +++ b/include/asm-blackfin/time.h @@ -0,0 +1,36 @@ +/* + * asm-blackfin/time.h: + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ASM_BLACKFIN_TIME_H +#define _ASM_BLACKFIN_TIME_H + +/* + * The way that the Blackfin core timer works is: + * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE) + * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT) + * + * If you take the fastest clock (1ns, or 1GHz to make the math work easier) + * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter + * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need + * to use TSCALE, and program it to zero (which is pass CCLK through). + * If you feel like using it, try to keep HZ * TIMESCALE to some + * value that divides easy (like power of 2). + */ + +#ifndef CONFIG_CPU_FREQ +#define TIME_SCALE 1 +#else +/* + * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 . + * Whenever we change the Core Clock frequency changes we immediately + * adjust the Core Timer Presale Register. This way we don't lose time. + */ +#define TIME_SCALE 4 +#endif + +#endif diff --git a/include/asm-blackfin/timex.h b/include/asm-blackfin/timex.h index 828590117f5..22b0806161b 100644 --- a/include/asm-blackfin/timex.h +++ b/include/asm-blackfin/timex.h @@ -1,18 +1,23 @@ -/* blackfin architecture timex specifications: Lineo Inc. 2001 +/* + * asm-blackfin/timex.h: cpu cycles! * - * Based on: include/asm-m68knommu/timex.h + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ -#ifndef _ASMBLACKFIN_TIMEX_H -#define _ASMBLACKFIN_TIMEX_H +#ifndef _ASM_BLACKFIN_TIMEX_H +#define _ASM_BLACKFIN_TIMEX_H #define CLOCK_TICK_RATE 1000000 /* Underlying HZ */ -typedef unsigned long cycles_t; +typedef unsigned long long cycles_t; static inline cycles_t get_cycles(void) { - return 0; + unsigned long tmp, tmp2; + __asm__("%0 = cycles; %1 = cycles2;" : "=d"(tmp), "=d"(tmp2)); + return tmp | ((cycles_t)tmp2 << 32); } #endif diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h index ef18afbc210..312b596b973 100644 --- a/include/asm-blackfin/trace.h +++ b/include/asm-blackfin/trace.h @@ -62,14 +62,14 @@ extern unsigned long software_trace_buff[]; preg.L = LO(TBUFCTL); \ preg.H = HI(TBUFCTL); \ dreg = [preg]; \ - [sp++] = dreg; \ + [--sp] = dreg; \ dreg = 0x1; \ [preg] = dreg; #define trace_buffer_restore(preg, dreg) \ preg.L = LO(TBUFCTL); \ preg.H = HI(TBUFCTL); \ - dreg = [sp--]; \ + dreg = [sp++]; \ [preg] = dreg; #else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 22a410b8003..d928b809905 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -133,7 +133,7 @@ static inline int bad_user_access_length(void) } #define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\ - __FILE__, __LINE__, __FUNCTION__),\ + __FILE__, __LINE__, __func__),\ bad_user_access_length(), (-EFAULT)) /* @@ -177,7 +177,7 @@ static inline int bad_user_access_length(void) default: \ x = 0; \ printk(KERN_INFO "get_user_bad: %s:%d %s\n", \ - __FILE__, __LINE__, __FUNCTION__); \ + __FILE__, __LINE__, __func__); \ _err = __get_user_bad(); \ break; \ } \ diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h index c18a399f6e3..42955d0c439 100644 --- a/include/asm-blackfin/unistd.h +++ b/include/asm-blackfin/unistd.h @@ -265,14 +265,14 @@ /* 258 __NR_remap_file_pages */ #define __NR_set_tid_address 259 #define __NR_timer_create 260 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_timer_settime 261 +#define __NR_timer_gettime 262 +#define __NR_timer_getoverrun 263 +#define __NR_timer_delete 264 +#define __NR_clock_settime 265 +#define __NR_clock_gettime 266 +#define __NR_clock_getres 267 +#define __NR_clock_nanosleep 268 #define __NR_statfs64 269 #define __NR_fstatfs64 270 #define __NR_tgkill 271 @@ -283,11 +283,11 @@ /* 276 __NR_get_mempolicy */ /* 277 __NR_set_mempolicy */ #define __NR_mq_open 278 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_mq_unlink 279 +#define __NR_mq_timedsend 280 +#define __NR_mq_timedreceive 281 +#define __NR_mq_notify 282 +#define __NR_mq_getsetattr 283 #define __NR_kexec_load 284 #define __NR_waitid 285 #define __NR_add_key 286 |