diff options
256 files changed, 8009 insertions, 4887 deletions
@@ -951,6 +951,12 @@ S: Brevia 1043 S: S-114 79 Stockholm S: Sweden +N: Pekka Enberg +E: penberg@cs.helsinki.fi +W: http://www.cs.helsinki.fi/u/penberg/ +D: Various kernel hacks, fixes, and cleanups. +S: Finland + N: David Engebretsen E: engebret@us.ibm.com D: Linux port to 64-bit PowerPC architecture diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 6d4b1ef5b6f..49c745720f4 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -325,8 +325,13 @@ X!Ekernel/module.c !Ekernel/irq/manage.c </sect1> + <sect1><title>DMA Channels</title> +!Ekernel/dma.c + </sect1> + <sect1><title>Resources Management</title> !Ikernel/resource.c +!Ekernel/resource.c </sect1> <sect1><title>MTRR Handling</title> diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index 7756e09ea75..9f08d73d90b 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -364,6 +364,7 @@ You can change this at module load time (for a module) with: regspacings=<sp1>,<sp2>,... regsizes=<size1>,<size2>,... regshifts=<shift1>,<shift2>,... slave_addrs=<addr1>,<addr2>,... + force_kipmid=<enable1>,<enable2>,... Each of these except si_trydefaults is a list, the first item for the first interface, second item for the second interface, etc. @@ -409,7 +410,13 @@ The slave_addrs specifies the IPMI address of the local BMC. This is usually 0x20 and the driver defaults to that, but in case it's not, it can be specified when the driver starts up. -When compiled into the kernel, the addresses can be specified on the +The force_ipmid parameter forcefully enables (if set to 1) or disables +(if set to 0) the kernel IPMI daemon. Normally this is auto-detected +by the driver, but systems with broken interrupts might need an enable, +or users that don't want the daemon (don't need the performance, don't +want the CPU hit) can disable it. + +When compiled into the kernel, the parameters can be specified on the kernel command line as: ipmi_si.type=<type1>,<type2>... @@ -419,6 +426,7 @@ kernel command line as: ipmi_si.regsizes=<size1>,<size2>,... ipmi_si.regshifts=<shift1>,<shift2>,... ipmi_si.slave_addrs=<addr1>,<addr2>,... + ipmi_si.force_kipmid=<enable1>,<enable2>,... It works the same as the module parameters of the same names. diff --git a/Documentation/fb/intel810.txt b/Documentation/fb/intel810.txt index 4f0d6bc789e..be3e7836abe 100644 --- a/Documentation/fb/intel810.txt +++ b/Documentation/fb/intel810.txt @@ -9,8 +9,9 @@ Intel 810/815 Framebuffer driver ================================================================ A. Introduction + This is a framebuffer driver for various Intel 810/815 compatible -graphics devices. These would include: + graphics devices. These include: Intel 810 Intel 810E @@ -21,136 +22,136 @@ graphics devices. These would include: B. Features - - Choice of using Discrete Video Timings, VESA Generalized Timing + - Choice of using Discrete Video Timings, VESA Generalized Timing Formula, or a framebuffer specific database to set the video mode - - Supports a variable range of horizontal and vertical resolution, and - vertical refresh rates if the VESA Generalized Timing Formula is + - Supports a variable range of horizontal and vertical resolution and + vertical refresh rates if the VESA Generalized Timing Formula is enabled. - - Supports color depths of 8, 16, 24 and 32 bits per pixel + - Supports color depths of 8, 16, 24 and 32 bits per pixel - Supports pseudocolor, directcolor, or truecolor visuals - - Full and optimized hardware acceleration at 8, 16 and 24 bpp + - Full and optimized hardware acceleration at 8, 16 and 24 bpp - Robust video state save and restore - - MTRR support + - MTRR support - Utilizes user-entered monitor specifications to automatically calculate required video mode parameters. - - Can concurrently run with xfree86 running with native i810 drivers + - Can concurrently run with xfree86 running with native i810 drivers - Hardware Cursor Support - Supports EDID probing either by DDC/I2C or through the BIOS C. List of available options - - a. "video=i810fb" + + a. "video=i810fb" enables the i810 driver Recommendation: required - - b. "xres:<value>" + + b. "xres:<value>" select horizontal resolution in pixels. (This parameter will be ignored if 'mode_option' is specified. See 'o' below). - Recommendation: user preference + Recommendation: user preference (default = 640) c. "yres:<value>" select vertical resolution in scanlines. If Discrete Video Timings is enabled, this will be ignored and computed as 3*xres/4. (This parameter will be ignored if 'mode_option' is specified. See 'o' - below) + below) Recommendation: user preference (default = 480) - - d. "vyres:<value>" + + d. "vyres:<value>" select virtual vertical resolution in scanlines. If (0) or none - is specified, this will be computed against maximum available memory. + is specified, this will be computed against maximum available memory. Recommendation: do not set (default = 480) e. "vram:<value>" - select amount of system RAM in MB to allocate for the video memory + select amount of system RAM in MB to allocate for the video memory Recommendation: 1 - 4 MB. (default = 4) - f. "bpp:<value>" - select desired pixel depth + f. "bpp:<value>" + select desired pixel depth Recommendation: 8 (default = 8) - g. "hsync1/hsync2:<value>" - select the minimum and maximum Horizontal Sync Frequency of the - monitor in KHz. If a using a fixed frequency monitor, hsync1 must + g. "hsync1/hsync2:<value>" + select the minimum and maximum Horizontal Sync Frequency of the + monitor in kHz. If using a fixed frequency monitor, hsync1 must be equal to hsync2. If EDID probing is successful, these will be ignored and values will be taken from the EDID block. Recommendation: check monitor manual for correct values - default (29/30) + (default = 29/30) - h. "vsync1/vsync2:<value>" + h. "vsync1/vsync2:<value>" select the minimum and maximum Vertical Sync Frequency of the monitor - in Hz. You can also use this option to lock your monitor's refresh + in Hz. You can also use this option to lock your monitor's refresh rate. If EDID probing is successful, these will be ignored and values will be taken from the EDID block. Recommendation: check monitor manual for correct values (default = 60/60) - IMPORTANT: If you need to clamp your timings, try to give some - leeway for computational errors (over/underflows). Example: if + IMPORTANT: If you need to clamp your timings, try to give some + leeway for computational errors (over/underflows). Example: if using vsync1/vsync2 = 60/60, make sure hsync1/hsync2 has at least a 1 unit difference, and vice versa. - i. "voffset:<value>" - select at what offset in MB of the logical memory to allocate the + i. "voffset:<value>" + select at what offset in MB of the logical memory to allocate the framebuffer memory. The intent is to avoid the memory blocks used by standard graphics applications (XFree86). The default - offset (16 MB for a 64MB aperture, 8 MB for a 32MB aperture) will - avoid XFree86's usage and allows up to 7MB/15MB of framebuffer - memory. Depending on your usage, adjust the value up or down, - (0 for maximum usage, 31/63 MB for the least amount). Note, an + offset (16 MB for a 64 MB aperture, 8 MB for a 32 MB aperture) will + avoid XFree86's usage and allows up to 7 MB/15 MB of framebuffer + memory. Depending on your usage, adjust the value up or down + (0 for maximum usage, 31/63 MB for the least amount). Note, an arbitrary setting may conflict with XFree86. Recommendation: do not set (default = 8 or 16 MB) - - j. "accel" - enable text acceleration. This can be enabled/reenabled anytime - by using 'fbset -accel true/false'. + + j. "accel" + enable text acceleration. This can be enabled/reenabled anytime + by using 'fbset -accel true/false'. Recommendation: enable - (default = not set) + (default = not set) - k. "mtrr" + k. "mtrr" enable MTRR. This allows data transfers to the framebuffer memory to occur in bursts which can significantly increase performance. - Not very helpful with the i810/i815 because of 'shared memory'. + Not very helpful with the i810/i815 because of 'shared memory'. Recommendation: do not set - (default = not set) + (default = not set) l. "extvga" if specified, secondary/external VGA output will always be enabled. Useful if the BIOS turns off the VGA port when no monitor is attached. - The external VGA monitor can then be attached without rebooting. + The external VGA monitor can then be attached without rebooting. Recommendation: do not set (default = not set) - - m. "sync" + + m. "sync" Forces the hardware engine to do a "sync" or wait for the hardware - to finish before starting another instruction. This will produce a + to finish before starting another instruction. This will produce a more stable setup, but will be slower. Recommendation: do not set @@ -162,6 +163,7 @@ C. List of available options Recommendation: do not set (default = not set) + o. <xres>x<yres>[-<bpp>][@<refresh>] The driver will now accept specification of boot mode option. If this is specified, the options 'xres' and 'yres' will be ignored. See @@ -183,8 +185,8 @@ append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \ vsync1:50,vsync2:85,accel,mtrr" This will initialize the framebuffer to 1024x768 at 8bpp. The framebuffer -will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate -will be computed based on the hsync1/hsync2 and vsync1/vsync2 values. +will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate +will be computed based on the hsync1/hsync2 and vsync1/vsync2 values. IMPORTANT: You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes @@ -194,10 +196,10 @@ vsync1 and vsync2 parameters. These parameters will be taken from the EDID block. E. Module options - - The module parameters are essentially similar to the kernel -parameters. The main difference is that you need to include a Boolean value -(1 for TRUE, and 0 for FALSE) for those options which don't need a value. + +The module parameters are essentially similar to the kernel +parameters. The main difference is that you need to include a Boolean value +(1 for TRUE, and 0 for FALSE) for those options which don't need a value. Example, to enable MTRR, include "mtrr=1". @@ -214,62 +216,62 @@ Or just add the following to /etc/modprobe.conf options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \ vsync2=85 accel=1 mtrr=1 -and just do a +and just do a modprobe i810fb F. Setup - a. Do your usual method of configuring the kernel. - + a. Do your usual method of configuring the kernel. + make menuconfig/xconfig/config - b. Under "Code Maturity Options", enable "Prompt for experimental/ - incomplete code/drivers". + b. Under "Code maturity level options" enable "Prompt for development + and/or incomplete code/drivers". c. Enable agpgart support for the Intel 810/815 on-board graphics. - This is required. The option is under "Character Devices" + This is required. The option is under "Character Devices". d. Under "Graphics Support", select "Intel 810/815" either statically or as a module. Choose "use VESA Generalized Timing Formula" if - you need to maximize the capability of your display. To be on the - safe side, you can leave this unselected. - + you need to maximize the capability of your display. To be on the + safe side, you can leave this unselected. + e. If you want support for DDC/I2C probing (Plug and Play Displays), set 'Enable DDC Support' to 'y'. To make this option appear, set 'use VESA Generalized Timing Formula' to 'y'. - f. If you want a framebuffer console, enable it under "Console - Drivers" + f. If you want a framebuffer console, enable it under "Console + Drivers". + + g. Compile your kernel. + + h. Load the driver as described in sections D and E. - g. Compile your kernel. - - h. Load the driver as described in section D and E. - i. Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver patch to see the chipset in action (or inaction :-). G. Acknowledgment: - + 1. Geert Uytterhoeven - his excellent howto and the virtual - framebuffer driver code made this possible. + framebuffer driver code made this possible. - 2. Jeff Hartmann for his agpgart code. + 2. Jeff Hartmann for his agpgart code. 3. The X developers. Insights were provided just by reading the XFree86 source code. 4. Intel(c). For this value-oriented chipset driver and for - providing documentation. + providing documentation. 5. Matt Sottek. His inputs and ideas helped in making some - optimizations possible. + optimizations possible. H. Home Page: A more complete, and probably updated information is provided at -http://i810fb.sourceforge.net. + http://i810fb.sourceforge.net. ########################### Tony diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.txt index aa0d322db17..da5ee74219e 100644 --- a/Documentation/fb/intelfb.txt +++ b/Documentation/fb/intelfb.txt @@ -88,12 +88,20 @@ Sample Usage In /etc/lilo.conf, add the line: -append="video=intelfb:800x600-32@75,accel,hwcursor,vram=8" +append="video=intelfb:mode=800x600-32@75,accel,hwcursor,vram=8" This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor will be enabled. +Remarks +------- + +If setting this parameter doesn't work (you stay in a 80x25 text-mode), +you might need to set the "vga=<mode>" parameter too - see vesafb.txt +in this directory. + + D. Module options The module parameters are essentially similar to the kernel diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 9364f47c711..b98f01fc14b 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -122,15 +122,6 @@ Who: Arjan van de Ven --------------------------- -What: START_ARRAY ioctl for md -When: July 2006 -Files: drivers/md/md.c -Why: Not reliable by design - can fail when most needed. - Alternatives exist -Who: NeilBrown <neilb@suse.de> - ---------------------------- - What: eepro100 network driver When: January 2007 Why: replaced by the e100 driver @@ -325,3 +316,11 @@ Why: i2c-isa is a non-sense and doesn't fit in the device driver Who: Jean Delvare <khali@linux-fr.org> --------------------------- + +What: ftape +When: 2.6.20 +Why: Orphaned for ages. SMP bugs long unfixed. Few users left + in the world. +Who: Jeff Garzik <jeff@garzik.org> + +--------------------------- diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.txt index f51eb4bc2ff..040b9773209 100644 --- a/Documentation/ia64/serial.txt +++ b/Documentation/ia64/serial.txt @@ -124,6 +124,13 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS - Add entry to /etc/securetty for console tty. + No ACPI serial devices found in 2.6.17 or later: + + - Turn on CONFIG_PNP and CONFIG_PNPACPI. Prior to 2.6.17, ACPI + serial devices were discovered by 8250_acpi. In 2.6.17, + 8250_acpi was replaced by the combination of 8250_pnp and + CONFIG_PNPACPI. + [1] http://www.dig64.org/specifications/DIG64_PCDPv20.pdf diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt index 2e7702e94a7..769ee05ee4d 100644 --- a/Documentation/kbuild/modules.txt +++ b/Documentation/kbuild/modules.txt @@ -43,7 +43,7 @@ are not planned to be included in the kernel tree. What is covered within this file is mainly information to authors of modules. The author of an external module should supply a makefile that hides most of the complexity, so one only has to type -'make' to build the module. A complete example will be present in +'make' to build the module. A complete example will be presented in chapter 4, "Creating a kbuild file for an external module". @@ -61,6 +61,7 @@ when building an external module. make -C <path-to-kernel> M=`pwd` For the running kernel use: + make -C /lib/modules/`uname -r`/build M=`pwd` For the above command to succeed, the kernel must have been @@ -130,10 +131,10 @@ when building an external module. To make sure the kernel contains the information required to build external modules the target 'modules_prepare' must be used. - 'module_prepare' exists solely as a simple way to prepare + 'modules_prepare' exists solely as a simple way to prepare a kernel source tree for building external modules. Note: modules_prepare will not build Module.symvers even if - CONFIG_MODULEVERSIONING is set. Therefore a full kernel build + CONFIG_MODVERSIONS is set. Therefore a full kernel build needs to be executed to make module versioning work. --- 2.5 Building separate files for a module @@ -450,7 +451,7 @@ kernel refuses to load the module. Module.symvers contains a list of all exported symbols from a kernel build. ---- 7.1 Symbols fron the kernel (vmlinux + modules) +--- 7.1 Symbols from the kernel (vmlinux + modules) During a kernel build, a file named Module.symvers will be generated. Module.symvers contains all exported symbols from the kernel and diff --git a/Documentation/md.txt b/Documentation/md.txt index 0668f9dc9d2..9ae9e407898 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -154,11 +154,12 @@ contains further md-specific information about the device. All md devices contain: level - a text file indicating the 'raid level'. This may be a standard - numerical level prefixed by "RAID-" - e.g. "RAID-5", or some - other name such as "linear" or "multipath". + a text file indicating the 'raid level'. e.g. raid0, raid1, + raid5, linear, multipath, faulty. If no raid level has been set yet (array is still being - assembled), this file will be empty. + assembled), the value will reflect whatever has been written + to it, which may be a name like the above, or may be a number + such as '0', '5', etc. raid_disks a text file with a simple number indicating the number of devices @@ -192,14 +193,6 @@ All md devices contain: 1.2 (newer format in varying locations) or "none" indicating that the kernel isn't managing metadata at all. - level - The raid 'level' for this array. The name will often (but not - always) be the same as the name of the module that implements the - level. To be auto-loaded the module must have an alias - md-$LEVEL e.g. md-raid5 - This can be written only while the array is being assembled, not - after it is started. - layout The "layout" for the array for the particular level. This is simply a number that is interpretted differently by different @@ -410,6 +403,15 @@ also have than sectors, this my be larger than the number of actual errors by a factor of the number of sectors in a page. + bitmap_set_bits + If the array has a write-intent bitmap, then writing to this + attribute can set bits in the bitmap, indicating that a resync + would need to check the corresponding blocks. Either individual + numbers or start-end pairs can be written. Multiple numbers + can be separated by a space. + Note that the numbers are 'bit' numbers, not 'block' numbers. + They should be scaled by the bitmap_chunksize. + Each active md device may also have attributes specific to the personality module that manages it. These are specific to the implementation of the module and could diff --git a/MAINTAINERS b/MAINTAINERS index f0cd5a3f6de..28cd70cf3e9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2711,14 +2711,6 @@ M: chrisw@sous-sol.org L: stable@kernel.org S: Maintained -STABLE BRANCH: -P: Greg Kroah-Hartman -M: greg@kroah.com -P: Chris Wright -M: chrisw@sous-sol.org -L: stable@kernel.org -S: Maintained - TPM DEVICE DRIVER P: Kylene Hall M: kjhall@us.ibm.com @@ -2825,17 +2817,13 @@ P: Paul Mundt M: lethal@linux-sh.org L: linuxsh-dev@lists.sourceforge.net (subscribers-only) W: http://www.linux-sh.org -W: http://www.m17n.org/linux-sh/ S: Maintained SUPERH64 (sh64) P: Paul Mundt M: lethal@linux-sh.org -P: Richard Curnow -M: rc@rc0.org.uk L: linuxsh-shmedia-dev@lists.sourceforge.net W: http://www.linux-sh.org -W: http://www.rc0.org.uk/sh64 S: Maintained SUN3/3X diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 8a31fc1bfb1..ad617365199 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -111,22 +111,26 @@ struct osf_dirent_callback { static int osf_filldir(void *__buf, const char *name, int namlen, loff_t offset, - ino_t ino, unsigned int d_type) + u64 ino, unsigned int d_type) { struct osf_dirent __user *dirent; struct osf_dirent_callback *buf = (struct osf_dirent_callback *) __buf; unsigned int reclen = ROUND_UP(NAME_OFFSET + namlen + 1); + unsigned int d_ino; buf->error = -EINVAL; /* only used if we fail */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; if (buf->basep) { if (put_user(offset, buf->basep)) return -EFAULT; buf->basep = NULL; } dirent = buf->dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(namlen, &dirent->d_namlen); put_user(reclen, &dirent->d_reclen); if (copy_to_user(dirent->d_name, name, namlen) || diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index ab5e9503bae..0221ba3bc79 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -198,8 +198,10 @@ u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exce vfp_single_dump("pack: final", vs); { s32 d = vfp_single_pack(vs); +#ifdef DEBUG pr_debug("VFP: %s: d(s%d)=%08x exceptions=%08x\n", func, sd, d, exceptions); +#endif vfp_put_float(d, sd); } diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index f7b171b92ea..cf1c446e003 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -86,6 +86,14 @@ config HIGHPTE with a lot of RAM, this can be wasteful of precious low memory. Setting this option will put user-space page tables in high memory. +config LARGE_ALLOCS + bool "Allow allocating large blocks (> 1MB) of memory" + help + Allow the slab memory allocator to keep chains for very large memory + sizes - up to 32MB. You may need this if your system has a lot of + RAM, and you need to able to allocate very large contiguous chunks. + If unsure, say N. + source "mm/Kconfig" choice diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index bddbd22706e..9d6a3f21014 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -125,6 +125,7 @@ sys32_execve (char __user *name, compat_uptr_t __user *argv, compat_uptr_t __use int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf) { + compat_ino_t ino; int err; if ((u64) stat->size > MAX_NON_LFS || @@ -132,11 +133,15 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf) !old_valid_dev(stat->rdev)) return -EOVERFLOW; + ino = stat->ino; + if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino) + return -EOVERFLOW; + if (clear_user(ubuf, sizeof(*ubuf))) return -EFAULT; err = __put_user(old_encode_dev(stat->dev), &ubuf->st_dev); - err |= __put_user(stat->ino, &ubuf->st_ino); + err |= __put_user(ino, &ubuf->st_ino); err |= __put_user(stat->mode, &ubuf->st_mode); err |= __put_user(stat->nlink, &ubuf->st_nlink); err |= __put_user(high2lowuid(stat->uid), &ubuf->st_uid); @@ -1222,16 +1227,20 @@ struct readdir32_callback { }; static int -filldir32 (void *__buf, const char *name, int namlen, loff_t offset, ino_t ino, +filldir32 (void *__buf, const char *name, int namlen, loff_t offset, u64 ino, unsigned int d_type) { struct compat_dirent __user * dirent; struct getdents32_callback * buf = (struct getdents32_callback *) __buf; int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4); + u32 d_ino; buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; buf->error = -EFAULT; /* only used if we fail.. */ dirent = buf->previous; if (dirent) @@ -1239,7 +1248,7 @@ filldir32 (void *__buf, const char *name, int namlen, loff_t offset, ino_t ino, return -EFAULT; dirent = buf->current_dir; buf->previous = dirent; - if (put_user(ino, &dirent->d_ino) + if (put_user(d_ino, &dirent->d_ino) || put_user(reclen, &dirent->d_reclen) || copy_to_user(dirent->d_name, name, namlen) || put_user(0, dirent->d_name + namlen)) @@ -1287,17 +1296,21 @@ out: } static int -fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, ino_t ino, +fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, u64 ino, unsigned int d_type) { struct readdir32_callback * buf = (struct readdir32_callback *) __buf; struct old_linux32_dirent __user * dirent; + u32 d_ino; if (buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; buf->count++; dirent = buf->dirent; - if (put_user(ino, &dirent->d_ino) + if (put_user(d_ino, &dirent->d_ino) || put_user(offset, &dirent->d_offset) || put_user(namlen, &dirent->d_namlen) || copy_to_user(dirent->d_name, name, namlen) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 52cada45b35..53f4171fc18 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -77,6 +77,8 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) memset(&tmp, 0, sizeof(tmp)); tmp.st_dev = new_encode_dev(stat->dev); tmp.st_ino = stat->ino; + if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino) + return -EOVERFLOW; tmp.st_mode = stat->mode; tmp.st_nlink = stat->nlink; SET_UID(tmp.st_uid, stat->uid); diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index 11bb9717497..93c74fefff7 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -1739,12 +1739,13 @@ struct irix_dirent32_callback { #define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1)) static int irix_filldir32(void *__buf, const char *name, - int namlen, loff_t offset, ino_t ino, unsigned int d_type) + int namlen, loff_t offset, u64 ino, unsigned int d_type) { struct irix_dirent32 __user *dirent; struct irix_dirent32_callback *buf = __buf; unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1); int err = 0; + u32 d_ino; #ifdef DEBUG_GETDENTS printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]", @@ -1753,12 +1754,15 @@ static int irix_filldir32(void *__buf, const char *name, buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; if (dirent) err = __put_user(offset, &dirent->d_off); dirent = buf->current_dir; err |= __put_user(dirent, &buf->previous); - err |= __put_user(ino, &dirent->d_ino); + err |= __put_user(d_ino, &dirent->d_ino); err |= __put_user(reclen, &dirent->d_reclen); err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0; err |= __put_user(0, &dirent->d_name[namlen]); @@ -1837,7 +1841,7 @@ struct irix_dirent64_callback { #define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1)) static int irix_filldir64(void *__buf, const char *name, - int namlen, loff_t offset, ino_t ino, unsigned int d_type) + int namlen, loff_t offset, u64 ino, unsigned int d_type) { struct irix_dirent64 __user *dirent; struct irix_dirent64_callback * buf = __buf; diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index d7c80edf448..6e79dbf3f6b 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -77,17 +77,21 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset, { struct hpux_dirent * dirent; struct getdents_callback * buf = (struct getdents_callback *) __buf; + ino_t d_ino; int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1); buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; if (dirent) put_user(offset, &dirent->d_off); dirent = buf->current_dir; buf->previous = dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(reclen, &dirent->d_reclen); put_user(namlen, &dirent->d_namlen); copy_to_user(dirent->d_name, name, namlen); diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index b7486980308..e3b30bc3645 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -237,14 +237,19 @@ int sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) { + compat_ino_t ino; int err; if (stat->size > MAX_NON_LFS || !new_valid_dev(stat->dev) || !new_valid_dev(stat->rdev)) return -EOVERFLOW; + ino = stat->ino; + if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino) + return -EOVERFLOW; + err = put_user(new_encode_dev(stat->dev), &statbuf->st_dev); - err |= put_user(stat->ino, &statbuf->st_ino); + err |= put_user(ino, &statbuf->st_ino); err |= put_user(stat->mode, &statbuf->st_mode); err |= put_user(stat->nlink, &statbuf->st_nlink); err |= put_user(0, &statbuf->st_reserved1); @@ -312,16 +317,20 @@ filldir32 (void *__buf, const char *name, int namlen, loff_t offset, ino_t ino, struct linux32_dirent __user * dirent; struct getdents32_callback * buf = (struct getdents32_callback *) __buf; int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1, 4); + u32 d_ino; buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; if (dirent) put_user(offset, &dirent->d_off); dirent = buf->current_dir; buf->previous = dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(reclen, &dirent->d_reclen); copy_to_user(dirent->d_name, name, namlen); put_user(0, dirent->d_name + namlen); @@ -371,12 +380,16 @@ fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, ino_t { struct readdir32_callback * buf = (struct readdir32_callback *) __buf; struct old_linux32_dirent __user * dirent; + u32 d_ino; if (buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; buf->count++; dirent = buf->dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(offset, &dirent->d_offset); put_user(namlen, &dirent->d_namlen); copy_to_user(dirent->d_name, name, namlen); diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 01667d1d571..a00fe723655 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -20,6 +20,7 @@ CROSS32_COMPILE ?= CROSS32CC := $(CROSS32_COMPILE)gcc CROSS32AS := $(CROSS32_COMPILE)as CROSS32LD := $(CROSS32_COMPILE)ld +CROSS32AR := $(CROSS32_COMPILE)ar CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy ifeq ($(HAS_BIARCH),y) @@ -28,10 +29,11 @@ CROSS32CC := $(CC) -m32 CROSS32AS := $(AS) -a32 CROSS32LD := $(LD) -m elf32ppc CROSS32OBJCOPY := $(OBJCOPY) +CROSS32AR := $(AR) endif endif -export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY KBUILD_DEFCONFIG := $(shell uname -m)_defconfig @@ -146,7 +148,7 @@ all: $(KBUILD_IMAGE) CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage vmlinux.bin +BOOT_TARGETS = zImage zImage.initrd uImage PHONY += $(BOOT_TARGETS) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index e73774136b5..c383d56bbe1 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -20,33 +20,34 @@ # CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE # in the toplevel makefile. +all: $(obj)/zImage HOSTCC := gcc BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ $(shell $(CROSS32CC) -print-file-name=include) -fPIC BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc -OBJCOPYFLAGS := contents,alloc,load,readonly,data -OBJCOPY_COFF_ARGS := -O aixcoff-rs6000 --set-start 0x500000 -OBJCOPY_MIB_ARGS := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment + +ifeq ($(call cc-option-yn, -fstack-protector),y) +BOOTCFLAGS += -fno-stack-protector +endif + +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h -$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h) +$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \ + $(addprefix $(obj)/,$(zlibheader)) + +src-wlib := string.S stdio.c main.c div64.S $(zlib) +src-plat := of.c +src-boot := crt0.S $(src-wlib) $(src-plat) empty.c -src-boot-$(CONFIG_PPC_MULTIPLATFORM) := of.c -src-boot := crt0.S string.S stdio.c main.c div64.S $(src-boot-y) -src-boot += $(zlib) src-boot := $(addprefix $(obj)/, $(src-boot)) obj-boot := $(addsuffix .o, $(basename $(src-boot))) - -ifeq ($(call cc-option-yn, -fstack-protector),y) -BOOTCFLAGS += -fno-stack-protector -endif - -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) +obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) +obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) quiet_cmd_copy_zlib = COPY $@ cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ @@ -66,8 +67,14 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) -clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) +$(obj)/empty.c: + @touch $@ + +$(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S + @cp $< $@ +clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(obj)/empty.c quiet_cmd_bootcc = BOOTCC $@ cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< @@ -75,146 +82,97 @@ quiet_cmd_bootcc = BOOTCC $@ quiet_cmd_bootas = BOOTAS $@ cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< -quiet_cmd_bootld = BOOTLD $@ - cmd_bootld = $(CROSS32LD) -T $(srctree)/$(src)/$(3) -o $@ $(2) +quiet_cmd_bootar = BOOTAR $@ + cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $^; mv $@.$$$$ $@ $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c $(call if_changed_dep,bootcc) $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S $(call if_changed_dep,bootas) -#----------------------------------------------------------- -# ELF sections within the zImage bootloader/wrapper -#----------------------------------------------------------- -required := vmlinux.strip -initrd := initrd +$(obj)/wrapper.a: $(obj-wlib) + $(call cmd,bootar) -obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section))) -src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) -gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) +hostprogs-y := addnote addRamDisk hack-coff -hostprogs-y := addnote addRamDisk hack-coff +extra-y := $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ + $(obj)/zImage.lds $(obj)/zImage.coff.lds -targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \ - zImage.coff zImage.initrd.coff miboot.image miboot.initrd.image \ - $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \ - vmlinux.initrd dummy.o -extra-y := initrd.o +wrapper :=$(srctree)/$(src)/wrapper +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff) -quiet_cmd_ramdisk = RAMDISK $@ - cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ +############# +# Bits for building various flavours of zImage -quiet_cmd_stripvm = STRIP $@ - cmd_stripvm = $(STRIP) -s -R .comment $< -o $@ +ifneq ($(CROSS32_COMPILE),) +CROSSWRAP := -C $(CROSS32_COMPILE) +else +ifneq ($(CROSS_COMPILE),) +CROSSWRAP := -C $(CROSS_COMPILE) +endif +endif -vmlinux.strip: vmlinux - $(call if_changed,stripvm) -$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz - $(call if_changed,ramdisk) +quiet_cmd_wrap = WRAP $@ + cmd_wrap =$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux +quiet_cmd_wrap_initrd = WRAP $@ + cmd_wrap_initrd =$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \ + -i $(obj)/ramdisk.image.gz vmlinux -quiet_cmd_addsection = ADDSEC $@ - cmd_addsection = $(CROSS32OBJCOPY) $@ \ - --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \ - --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS) +$(obj)/zImage.chrp: vmlinux $(wrapperbits) + $(call cmd,wrap,chrp) -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = $(obj)/addnote $@ +$(obj)/zImage.initrd.chrp: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,chrp) -quiet_cmd_gen-miboot = GEN $@ - cmd_gen-miboot = $(OBJCOPY) $(OBJCOPY_MIB_ARGS) \ - --add-section=$1=$(word 2, $^) $< $@ +$(obj)/zImage.pseries: vmlinux $(wrapperbits) + $(call cmd,wrap,pseries) -quiet_cmd_gencoff = COFF $@ - cmd_gencoff = $(OBJCOPY) $(OBJCOPY_COFF_ARGS) $@ && \ - $(obj)/hack-coff $@ +$(obj)/zImage.initrd.pseries: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pseries) -$(call gz-sec, $(required)): $(obj)/kernel-%.gz: % - $(call if_changed,gzip) +$(obj)/zImage.pmac: vmlinux $(wrapperbits) + $(call cmd,wrap,pmac) -$(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz - cp -f $(obj)/ramdisk.image.gz $@ +$(obj)/zImage.initrd.pmac: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pmac) -$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz - @touch $@ +$(obj)/zImage.coff: vmlinux $(wrapperbits) + $(call cmd,wrap,pmaccoff) -$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c - $(call if_changed_dep,bootcc) - $(call cmd,addsection) +$(obj)/zImage.initrd.coff: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,pmaccoff) + +$(obj)/zImage.miboot: vmlinux $(wrapperbits) + $(call cmd,wrap,miboot) -$(obj)/zImage.vmode $(obj)/zImage.coff: obj-boot += $(call obj-sec, $(required)) -$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot),zImage.lds) +$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits) + $(call cmd,wrap_initrd,miboot) -$(obj)/zImage.initrd.vmode $(obj)/zImage.initrd.coff: obj-boot += $(call obj-sec, $(required) $(initrd)) -$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot),zImage.lds) +$(obj)/uImage: vmlinux $(wrapperbits) + $(call cmd,wrap,uboot) + +image-$(CONFIG_PPC_PSERIES) += zImage.pseries +image-$(CONFIG_PPC_MAPLE) += zImage.pseries +image-$(CONFIG_PPC_CELL) += zImage.pseries +image-$(CONFIG_PPC_CHRP) += zImage.chrp +image-$(CONFIG_PPC_PMAC) += zImage.pmac +image-$(CONFIG_DEFAULT_UIMAGE) += uImage # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. -coffimage-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.coff -coffrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.initrd.coff -mibootimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.image -mibrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.initrd.image - -$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote $(coffimage-y-y) \ - $(mibootimg-y-y) - @cp -f $< $@ - $(call if_changed,addnote) - -$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote \ - $(coffrdimg-y-y) $(mibrdimg-y-y) - @cp -f $< $@ - $(call if_changed,addnote) - -$(obj)/zImage.coff: $(call obj-sec, $(required)) $(obj-boot) \ - $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff - $(call cmd,bootld,$(obj-boot),zImage.coff.lds) - $(call cmd,gencoff) - -$(obj)/zImage.initrd.coff: $(call obj-sec, $(required) $(initrd)) $(obj-boot) \ - $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff - $(call cmd,bootld,$(obj-boot),zImage.coff.lds) - $(call cmd,gencoff) - -$(obj)/miboot.image: $(obj)/dummy.o $(obj)/vmlinux.gz - $(call cmd,gen-miboot,image) - -$(obj)/miboot.initrd.image: $(obj)/miboot.image $(images)/ramdisk.image.gz - $(call cmd,gen-miboot,initrd) - -#----------------------------------------------------------- -# build u-boot images -#----------------------------------------------------------- -quiet_cmd_mygzip = GZIP $@ -cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ - -quiet_cmd_objbin = OBJCOPY $@ - cmd_objbin = $(OBJCOPY) -O binary $< $@ - -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ - -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ - -d $< $@ - -MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets += uImage -extra-y += vmlinux.bin vmlinux.gz - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objbin) - -$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,mygzip) - -$(obj)/uImage: $(obj)/vmlinux.gz - $(Q)rm -f $@ - $(call cmd,uimage) - @echo -n ' Image: $@ ' - @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi - -install: $(CONFIGURE) $(BOOTIMAGE) - sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" - -clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip) +ifeq ($(CONFIG_PPC32),y) +image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot +endif + +initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y)) + +$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) + @rm -f $@; ln $< $@ +$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) + @rm -f $@; ln $< $@ + +install: $(CONFIGURE) $(image-y) + sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $< + +clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz) +clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz) diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts new file mode 100644 index 00000000000..2b168486aeb --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -0,0 +1,302 @@ +/* + * MPC8560 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8560ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <04ead9a0>; + bus-frequency = <13ab6680>; + clock-frequency = <312c8040>; + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + soc8560@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <13ab6680>; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 0C 00 00 FD ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 0C 00 01 FD ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + pci@8000 { + linux,phandle = <8000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "85xx"; + device_type = "pci"; + reg = <8000 400>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x2 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x3 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x4 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x5 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 12 */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 13 */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 14*/ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 15 */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 18 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 19 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 20 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 21 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + + interrupt-parent = <40000>; + interrupts = <42 0>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 01000000>; + }; + + pic@40000 { + linux,phandle = <40000>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 20100>; + built-in; + device_type = "open-pic"; + }; + + cpm@e0000000 { + linux,phandle = <e0000000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM2"; + ranges = <0 0 c0000>; + reg = <80000 40000>; + command-proc = <919c0>; + brg-frequency = <9d5b340>; + + pic@90c00 { + linux,phandle = <90c00>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 0>; + interrupt-parent = <40000>; + reg = <90c00 80>; + built-in; + device_type = "cpm-pic"; + }; + + scc@91a00 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <1>; + reg = <91a00 20 88000 100>; + clock-setup = <00ffffff 0>; + rx-clock = <1>; + tx-clock = <1>; + current-speed = <1c200>; + interrupts = <64 1>; + interrupt-parent = <90c00>; + }; + + scc@91a20 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <2>; + reg = <91a20 20 88100 100>; + clock-setup = <ff00ffff 90000>; + rx-clock = <2>; + tx-clock = <2>; + current-speed = <1c200>; + interrupts = <65 1>; + interrupt-parent = <90c00>; + }; + + fcc@91320 { + device_type = "network"; + compatible = "fs_enet"; + model = "FCC"; + device-id = <2>; + reg = <91320 20 88500 100 913a0 30>; + mac-address = [ 00 00 0C 00 02 FD ]; + clock-setup = <ff00ffff 250000>; + rx-clock = <15>; + tx-clock = <16>; + interrupts = <5d 1>; + interrupt-parent = <90c00>; + phy-handle = <2452002>; + }; + + fcc@91340 { + device_type = "network"; + compatible = "fs_enet"; + model = "FCC"; + device-id = <3>; + reg = <91340 20 88600 100 913d0 30>; + mac-address = [ 00 00 0C 00 03 FD ]; + clock-setup = <ffff00ff 3700>; + rx-clock = <17>; + tx-clock = <18>; + interrupts = <5e 1>; + interrupt-parent = <90c00>; + phy-handle = <2452003>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper new file mode 100755 index 00000000000..eab7318729e --- /dev/null +++ b/arch/powerpc/boot/wrapper @@ -0,0 +1,204 @@ +#!/bin/sh + +# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org> +# This program may be used under the terms of version 2 of the GNU +# General Public License. + +# This script takes a kernel binary and optionally an initrd image +# and/or a device-tree blob, and creates a bootable zImage for a +# given platform. + +# Options: +# -o zImage specify output file +# -p platform specify platform (links in $platform.o) +# -i initrd specify initrd file +# -d devtree specify device-tree blob +# -s tree.dts specify device-tree source file (needs dtc installed) +# -c cache $kernel.strip.gz (use if present & newer, else make) +# -C prefix specify command prefix for cross-building tools +# (strip, objcopy, ld) +# -D dir specify directory containing data files used by script +# (default ./arch/powerpc/boot) +# -W dir specify working directory for temporary files (default .) + +# defaults +kernel= +ofile=zImage +platform=of +initrd= +dtb= +dts= +cacheit= + +# cross-compilation prefix +CROSS= + +# directory for object and other files used by this script +object=arch/powerpc/boot + +# directory for working files +tmpdir=. + +usage() { + echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2 + echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2 + echo ' [-D datadir] [-W workingdir] [vmlinux]' >&2 + exit 1 +} + +while [ "$#" -gt 0 ]; do + case "$1" in + -o) + shift + [ "$#" -gt 0 ] || usage + ofile="$1" + ;; + -p) + shift + [ "$#" -gt 0 ] || usage + platform="$1" + ;; + -i) + shift + [ "$#" -gt 0 ] || usage + initrd="$1" + ;; + -d) + shift + [ "$#" -gt 0 ] || usage + dtb="$1" + ;; + -s) + shift + [ "$#" -gt 0 ] || usage + dts="$1" + ;; + -c) + cacheit=y + ;; + -C) + shift + [ "$#" -gt 0 ] || usage + CROSS="$1" + ;; + -D) + shift + [ "$#" -gt 0 ] || usage + object="$1" + ;; + -W) + shift + [ "$#" -gt 0 ] || usage + tmpdir="$1" + ;; + -?) + usage + ;; + *) + [ -z "$kernel" ] || usage + kernel="$1" + ;; + esac + shift +done + +if [ -n "$dts" ]; then + if [ -z "$dtb" ]; then + dtb="$platform.dtb" + fi + dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1 +fi + +if [ -z "$kernel" ]; then + kernel=vmlinux +fi + +platformo=$object/"$platform".o +lds=$object/zImage.lds +ext=strip +objflags=-S +tmp=$tmpdir/zImage.$$.o +ksection=.kernel:vmlinux.strip +isection=.kernel:initrd + +case "$platform" in +pmac|pseries|chrp) + platformo=$object/of.o + ;; +pmaccoff) + platformo=$object/of.o + lds=$object/zImage.coff.lds + ;; +miboot|uboot) + # miboot and U-boot want just the bare bits, not an ELF binary + ext=bin + objflags="-O binary" + tmp="$ofile" + ksection=image + isection=initrd + ;; +esac + +vmz="$tmpdir/`basename \"$kernel\"`.$ext" +if [ -z "$cacheit" -o ! -f "$vmz.gz" -o "$vmz.gz" -ot "$kernel" ]; then + ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" + gzip -f -9 "$vmz.$$" + if [ -n "$cacheit" ]; then + mv -f "$vmz.$$.gz" "$vmz.gz" + else + vmz="$vmz.$$" + fi +fi + +case "$platform" in +uboot) + rm -f "$ofile" + version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \ + cut -d' ' -f3` + if [ -n "$version" ]; then + version="-n Linux-$version" + fi + mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \ + $version -d "$vmz.gz" "$ofile" + if [ -z "$cacheit" ]; then + rm -f $vmz.gz + fi + exit 0 + ;; +esac + +addsec() { + ${CROSS}objcopy $4 $1 \ + --add-section=$3="$2" \ + --set-section-flags=$3=contents,alloc,load,readonly,data +} + +addsec $tmp "$vmz.gz" $ksection $object/empty.o +if [ -z "$cacheit" ]; then + rm -f "$vmz.gz" +fi + +if [ -n "$initrd" ]; then + addsec $tmp "$initrd" initrd +fi + +if [ -n "$dtb" ]; then + addsec $tmp "$dtb" dtb +fi + +if [ "$platform" != "miboot" ]; then + ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \ + $object/crt0.o $platformo $tmp $object/wrapper.a + rm $tmp +fi + +# post-processing needed for some platforms +case "$platform" in +pseries|chrp) + $object/addnote "$ofile" + ;; +pmaccoff) + ${CROSS}objcopy -O aixcoff-rs6000 --set-start 0x500000 "$ofile" + $object/hack-coff "$ofile" + ;; +esac diff --git a/arch/powerpc/boot/zImage.coff.lds b/arch/powerpc/boot/zImage.coff.lds.S index 6016251a1a2..6016251a1a2 100644 --- a/arch/powerpc/boot/zImage.coff.lds +++ b/arch/powerpc/boot/zImage.coff.lds.S diff --git a/arch/powerpc/boot/zImage.lds b/arch/powerpc/boot/zImage.lds.S index 4b6bb3ffe3d..4b6bb3ffe3d 100644 --- a/arch/powerpc/boot/zImage.lds +++ b/arch/powerpc/boot/zImage.lds.S diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index bbf2b5f8a8c..fee72f8a2fb 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -492,7 +492,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 4b9c2ed925f..92d0a9dd0b8 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -490,23 +490,23 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index eb0885ea073..d58f82f836f 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -475,7 +475,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 719fba4eb42..d1811e75451 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -413,23 +413,23 @@ CONFIG_BLK_DEV_SD=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set -CONFIG_SCSI_SATA_MV=y -# CONFIG_SCSI_SATA_NV is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 8da6a47f033..cd3535e1a09 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc6 -# Sun Sep 10 10:28:05 2006 +# Linux kernel version: 2.6.18 +# Mon Sep 25 19:41:14 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -21,6 +21,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y CONFIG_DEFAULT_UIMAGE=y # @@ -61,25 +62,25 @@ CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y +CONFIG_SYSCTL=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -259,7 +260,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -313,6 +313,7 @@ CONFIG_MTD_CHAR=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -464,23 +465,23 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -CONFIG_SCSI_SATA_SIL=y -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -1277,11 +1278,11 @@ CONFIG_PLIST=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1293,15 +1294,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set -CONFIG_BOOTX_TEXT=y -CONFIG_SERIAL_TEXT_DEBUG=y +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1314,6 +1315,8 @@ CONFIG_SERIAL_TEXT_DEBUG=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1323,6 +1326,8 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/mpc8560_ads_defconfig new file mode 100644 index 00000000000..ddc2a7b07ba --- /dev/null +++ b/arch/powerpc/configs/mpc8560_ads_defconfig @@ -0,0 +1,854 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.18-rc4 +# Fri Aug 11 16:45:05 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_MPIC=y +CONFIG_CPM2=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +CONFIG_MPC8560_ADS=y +# CONFIG_MPC85xx_CDS is not set +CONFIG_MPC8560=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_PC_KEYBOARD is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DEBUG=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +CONFIG_SERIAL_CPM_SCC2=y +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 6861dde7d77..765c8bb90dd 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -682,7 +682,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set @@ -1826,7 +1826,7 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 7517d0c5303..be11df7c11a 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -520,23 +520,23 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index a8cdf312e1b..44175fb7ade 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -506,7 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_ATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index b4432332341..c3f58f2f9f5 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -777,7 +777,6 @@ unsigned int irq_alloc_virt(struct irq_host *host, { unsigned long flags; unsigned int i, j, found = NO_IRQ; - unsigned int limit = irq_virq_count - count; if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS)) return NO_IRQ; @@ -794,14 +793,16 @@ unsigned int irq_alloc_virt(struct irq_host *host, /* Look for count consecutive numbers in the allocatable * (non-legacy) space */ - for (i = NUM_ISA_INTERRUPTS; i <= limit; ) { - for (j = i; j < (i + count); j++) - if (irq_map[j].host != NULL) { - i = j + 1; - continue; - } - found = i; - break; + for (i = NUM_ISA_INTERRUPTS, j = 0; i < irq_virq_count; i++) { + if (irq_map[i].host != NULL) + j = 0; + else + j++; + + if (j == count) { + found = i - count + 1; + break; + } } if (found == NO_IRQ) { spin_unlock_irqrestore(&irq_big_lock, flags); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index dea75d73f98..975102a020d 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -526,9 +526,7 @@ static void do_syscall_trace(void) void do_syscall_trace_enter(struct pt_regs *regs) { -#ifdef CONFIG_PPC64 secure_computing(regs->gpr[0]); -#endif if (test_thread_flag(TIF_SYSCALL_TRACE) && (current->ptrace & PT_PTRACED)) @@ -548,12 +546,8 @@ void do_syscall_trace_enter(struct pt_regs *regs) void do_syscall_trace_leave(struct pt_regs *regs) { -#ifdef CONFIG_PPC32 - secure_computing(regs->gpr[0]); -#endif - if (unlikely(current->audit_context)) - audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) @@ -561,8 +555,3 @@ void do_syscall_trace_leave(struct pt_regs *regs) && (current->ptrace & PT_PTRACED)) do_syscall_trace(); } - -#ifdef CONFIG_PPC32 -EXPORT_SYMBOL(do_syscall_trace_enter); -EXPORT_SYMBOL(do_syscall_trace_leave); -#endif diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 5e391fc2534..d15c33e9595 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -69,16 +69,20 @@ struct readdir_callback32 { }; static int fillonedir(void * __buf, const char * name, int namlen, - off_t offset, ino_t ino, unsigned int d_type) + off_t offset, u64 ino, unsigned int d_type) { struct readdir_callback32 * buf = (struct readdir_callback32 *) __buf; struct old_linux_dirent32 __user * dirent; + ino_t d_ino; if (buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; buf->count++; dirent = buf->dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(offset, &dirent->d_offset); put_user(namlen, &dirent->d_namlen); copy_to_user(dirent->d_name, name, namlen); @@ -120,15 +124,20 @@ asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp, int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) { + compat_ino_t ino; long err; if (stat->size > MAX_NON_LFS || !new_valid_dev(stat->dev) || !new_valid_dev(stat->rdev)) return -EOVERFLOW; + ino = stat->ino; + if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino) + return -EOVERFLOW; + err = access_ok(VERIFY_WRITE, statbuf, sizeof(*statbuf)) ? 0 : -EFAULT; err |= __put_user(new_encode_dev(stat->dev), &statbuf->st_dev); - err |= __put_user(stat->ino, &statbuf->st_ino); + err |= __put_user(ino, &statbuf->st_ino); err |= __put_user(stat->mode, &statbuf->st_mode); err |= __put_user(stat->nlink, &statbuf->st_nlink); err |= __put_user(stat->uid, &statbuf->st_uid); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 406f308ddea..d45a168bdac 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -25,8 +25,8 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); /* SMT stuff */ #ifdef CONFIG_PPC_MULTIPLATFORM -/* default to snooze disabled */ -DEFINE_PER_CPU(unsigned long, smt_snooze_delay); +/* Time in microseconds we delay before sleeping in the idle loop */ +DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 }; static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf, size_t count) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 8b278d85ca4..85b9244a098 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -1041,6 +1041,48 @@ void __init time_init(void) set_dec(tb_ticks_per_jiffy); } +#ifdef CONFIG_RTC_CLASS +static int set_rtc_class_time(struct rtc_time *tm) +{ + int err; + struct class_device *class_dev = + rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + + if (class_dev == NULL) + return -ENODEV; + + err = rtc_set_time(class_dev, tm); + + rtc_class_close(class_dev); + + return 0; +} + +static void get_rtc_class_time(struct rtc_time *tm) +{ + int err; + struct class_device *class_dev = + rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + + if (class_dev == NULL) + return; + + err = rtc_read_time(class_dev, tm); + + rtc_class_close(class_dev); + + return; +} + +int __init rtc_class_hookup(void) +{ + ppc_md.get_rtc_time = get_rtc_class_time; + ppc_md.set_rtc_time = set_rtc_class_time; + + return 0; +} +#endif /* CONFIG_RTC_CLASS */ + #define FEBRUARY 2 #define STARTOFTIME 1970 diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 336dd191f76..a0360ae10d0 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -14,9 +14,15 @@ endif obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o \ strcase.o +obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o obj-$(CONFIG_DEBUG_KERNEL) += sstep.o endif + +# Temporary hack until we have migrated to asm-powerpc +ifeq ($(CONFIG_PPC_MERGE),y) +obj-$(CONFIG_CPM2) += rheap.o +endif diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 31e511856dc..57bf991ccd6 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -423,17 +423,21 @@ void *rh_detach_region(rh_info_t * info, void *start, int size) return (void *)s; } -void *rh_alloc(rh_info_t * info, int size, const char *owner) +void *rh_alloc_align(rh_info_t * info, int size, int alignment, const char *owner) { struct list_head *l; rh_block_t *blk; rh_block_t *newblk; void *start; - /* Validate size */ - if (size <= 0) + /* Validate size, (must be power of two) */ + if (size <= 0 || (alignment & (alignment - 1)) != 0) return ERR_PTR(-EINVAL); + /* given alignment larger that default rheap alignment */ + if (alignment > info->alignment) + size += alignment - 1; + /* Align to configured alignment */ size = (size + (info->alignment - 1)) & ~(info->alignment - 1); @@ -476,15 +480,27 @@ void *rh_alloc(rh_info_t * info, int size, const char *owner) attach_taken_block(info, newblk); + /* for larger alignment return fixed up pointer */ + /* this is no problem with the deallocator since */ + /* we scan for pointers that lie in the blocks */ + if (alignment > info->alignment) + start = (void *)(((unsigned long)start + alignment - 1) & + ~(alignment - 1)); + return start; } +void *rh_alloc(rh_info_t * info, int size, const char *owner) +{ + return rh_alloc_align(info, size, info->alignment, owner); +} + /* allocate at precisely the given address */ void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner) { struct list_head *l; rh_block_t *blk, *newblk1, *newblk2; - unsigned long s, e, m, bs, be; + unsigned long s, e, m, bs = 0, be = 0; /* Validate size */ if (size <= 0) diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile index 754143e8936..29bc9126241 100644 --- a/arch/powerpc/math-emu/Makefile +++ b/arch/powerpc/math-emu/Makefile @@ -11,3 +11,6 @@ obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \ mcrfs.o mffs.o mtfsb0.o mtfsb1.o \ mtfsf.o mtfsfi.o stfiwx.o stfs.o \ udivmodti4.o + +CFLAGS_fabs.o = -fno-builtin-fabs +CFLAGS_math.o = -fno-builtin-fabs diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c index 75f57bc96b4..b4278cfd1f8 100644 --- a/arch/powerpc/oprofile/backtrace.c +++ b/arch/powerpc/oprofile/backtrace.c @@ -11,6 +11,7 @@ #include <linux/sched.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/compat.h> #define STACK_SP(STACK) *(STACK) @@ -26,8 +27,9 @@ static unsigned int user_getsp32(unsigned int sp, int is_first) { unsigned int stack_frame[2]; + void __user *p = compat_ptr(sp); - if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + if (!access_ok(VERIFY_READ, p, sizeof(stack_frame))) return 0; /* @@ -35,8 +37,7 @@ static unsigned int user_getsp32(unsigned int sp, int is_first) * which means that we've done all that we can do from * interrupt context. */ - if (__copy_from_user_inatomic(stack_frame, (void *)(long)sp, - sizeof(stack_frame))) + if (__copy_from_user_inatomic(stack_frame, p, sizeof(stack_frame))) return 0; if (!is_first) @@ -54,10 +55,10 @@ static unsigned long user_getsp64(unsigned long sp, int is_first) { unsigned long stack_frame[3]; - if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + if (!access_ok(VERIFY_READ, (void __user *)sp, sizeof(stack_frame))) return 0; - if (__copy_from_user_inatomic(stack_frame, (void *)sp, + if (__copy_from_user_inatomic(stack_frame, (void __user *)sp, sizeof(stack_frame))) return 0; diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 969fbb6d8c4..8c676d763bb 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -109,6 +109,10 @@ static int __init mpc834x_itx_probe(void) return 1; } +#ifdef CONFIG_RTC_CLASS +late_initcall(rtc_class_hookup); +#endif + define_machine(mpc834x_itx) { .name = "MPC834x ITX", .probe = mpc834x_itx_probe, diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index c3268d9877e..0584f3c7e88 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -11,6 +11,12 @@ config MPC8540_ADS help This option enables support for the MPC 8540 ADS board +config MPC8560_ADS + bool "Freescale MPC8560 ADS" + select DEFAULT_UIMAGE + help + This option enables support for the MPC 8560 ADS board + config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE @@ -25,6 +31,11 @@ config MPC8540 select PPC_INDIRECT_PCI default y if MPC8540_ADS || MPC85xx_CDS +config MPC8560 + bool + select PPC_INDIRECT_PCI + default y if MPC8560_ADS + config PPC_INDIRECT_PCI_BE bool depends on PPC_85xx @@ -34,4 +45,14 @@ config MPIC bool default y +config CPM2 + bool + depends on MPC8560 + default y + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it. + endmenu diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 7615aa59c78..282f5d0d015 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o +obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index cae6b73357d..28070e7ae50 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -32,6 +32,13 @@ #include <sysdev/fsl_soc.h> #include "mpc85xx.h" +#ifdef CONFIG_CPM2 +#include <linux/fs_enet_pd.h> +#include <asm/cpm2.h> +#include <sysdev/cpm2_pic.h> +#include <asm/fs_pd.h> +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -57,12 +64,29 @@ mpc85xx_pcibios_fixup(void) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_CPM2 + +static void cpm2_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + int cascade_irq; + + while ((cascade_irq = cpm2_get_irq(regs)) >= 0) { + generic_handle_irq(cascade_irq, regs); + } + desc->chip->eoi(irq); +} + +#endif /* CONFIG_CPM2 */ void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; struct device_node *np = NULL; +#ifdef CONFIG_CPM2 + int irq; +#endif np = of_find_node_by_type(np, "open-pic"); @@ -104,11 +128,103 @@ void __init mpc85xx_ads_pic_init(void) mpic_assign_isu(mpic, 14, r.start + 0x10100); mpic_init(mpic); + +#ifdef CONFIG_CPM2 + /* Setup CPM2 PIC */ + np = of_find_node_by_type(NULL, "cpm-pic"); + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + return; + } + irq = irq_of_parse_and_map(np, 0); + + cpm2_pic_init(np); + set_irq_chained_handler(irq, cpm2_cascade); +#endif } /* * Setup the architecture */ +#ifdef CONFIG_CPM2 +void init_fcc_ioports(struct fs_platform_info *fpi) +{ + struct io_port *io = cpm2_map(im_ioport); + int fcc_no = fs_get_fcc_index(fpi->fs_no); + int target; + u32 tempval; + + switch(fcc_no) { + case 1: + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + target = CPM_CLK_FCC2; + break; + case 2: + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + target = CPM_CLK_FCC3; + break; + default: + printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n"); + return; + } + + /* Port C has clocks...... */ + tempval = in_be32(&io->iop_psorc); + tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); + out_be32(&io->iop_psorc, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); + out_be32(&io->iop_pdirc, tempval); + tempval = in_be32(&io->iop_pparc); + tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8)); + out_be32(&io->iop_pparc, tempval); + + cpm2_unmap(io); + + /* Configure Serial Interface clock routing. + * First, clear FCC bits to zero, + * then set the ones we want. + */ + cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX); + cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX); +} +#endif + static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; @@ -131,6 +247,10 @@ static void __init mpc85xx_ads_setup_arch(void) of_node_put(cpu); } +#ifdef CONFIG_CPM2 + cpm2_reset(); +#endif + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.h b/arch/powerpc/platforms/85xx/mpc85xx_ads.h new file mode 100644 index 00000000000..effcbf78f85 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.h @@ -0,0 +1,61 @@ +/* + * MPC85xx ADS board definitions + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * Copyright 2004 Freescale Semiconductor Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC85XXADS_H +#define __MACH_MPC85XXADS_H + +#include <linux/config.h> +#include <linux/initrd.h> +#include <sysdev/fsl_soc.h> + +#define BCSR_ADDR ((uint)0xf8000000) +#define BCSR_SIZE ((uint)(32 * 1024)) + +#ifdef CONFIG_CPM2 + +#define MPC85xx_CPM_OFFSET (0x80000) + +#define CPM_MAP_ADDR (get_immrbase() + MPC85xx_CPM_OFFSET) +#define CPM_IRQ_OFFSET 60 + +#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) + +/* FCC1 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK9-12 */ +#define F1_RXCLK 12 +#define F1_TXCLK 11 + +/* FCC2 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F2_RXCLK 13 +#define F2_TXCLK 14 + +/* FCC3 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + +#endif /* CONFIG_CPM2 */ +#endif /* __MACH_MPC85XXADS_H */ diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 3bd36d46ab4..0f5c8ebc7fc 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -538,7 +538,7 @@ static void __iomem * __init map_spe_prop(struct spu *spu, const void *p; int proplen; - void* ret = NULL; + void __iomem *ret = NULL; int err = 0; p = get_property(n, name, &proplen); @@ -562,7 +562,7 @@ static void spu_unmap(struct spu *spu) iounmap(spu->priv2); iounmap(spu->priv1); iounmap(spu->problem); - iounmap((u8 __iomem *)spu->local_store); + iounmap((__force u8 __iomem *)spu->local_store); } /* This function shall be abstracted for HV platforms */ diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 58e794f9da1..51fd197ab5d 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1342,7 +1342,7 @@ static u64 spufs_id_get(void *data) return num; } -DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, 0, "0x%llx\n") +DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, NULL, "0x%llx\n") struct tree_descr spufs_dir_contents[] = { { "mem", &spufs_mem_fops, 0666, }, diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index c8670f51973..efc452e71ab 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -234,7 +234,7 @@ static void spu_hw_runcntl_stop(struct spu_context *ctx) static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode) { - struct spu_problem *prob = ctx->spu->problem; + struct spu_problem __iomem *prob = ctx->spu->problem; int ret; spin_lock_irq(&ctx->spu->register_lock); @@ -263,7 +263,7 @@ static int spu_hw_send_mfc_command(struct spu_context *ctx, struct mfc_dma_command *cmd) { u32 status; - struct spu_problem *prob = ctx->spu->problem; + struct spu_problem __iomem *prob = ctx->spu->problem; spin_lock_irq(&ctx->spu->register_lock); out_be32(&prob->mfc_lsa_W, cmd->lsa); diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index c3aa46b8e2b..1b827618e05 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -96,14 +96,14 @@ static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off) 1UL; } -static unsigned long u3_agp_cfg_access(struct pci_controller* hose, +static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset) { unsigned int caddr; if (bus == hose->first_busno) { if (dev_fn < (11 << 3)) - return 0; + return NULL; caddr = u3_agp_cfa0(dev_fn, offset); } else caddr = u3_agp_cfa1(bus, dev_fn, offset); @@ -114,14 +114,14 @@ static unsigned long u3_agp_cfg_access(struct pci_controller* hose, } while (in_le32(hose->cfg_addr) != caddr); offset &= 0x07; - return ((unsigned long)hose->cfg_data) + offset; + return hose->cfg_data + offset; } static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -136,13 +136,13 @@ static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_le16((u16 *)addr); + *val = in_le16(addr); break; default: - *val = in_le32((u32 *)addr); + *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -152,7 +152,7 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -167,16 +167,16 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); + out_8(addr, val); + (void) in_8(addr); break; case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); + out_le16(addr, val); + (void) in_le16(addr); break; default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); + out_le32(addr, val); + (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -198,22 +198,22 @@ static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off) return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL; } -static unsigned long u3_ht_cfg_access(struct pci_controller* hose, +static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset) { if (bus == hose->first_busno) { if (PCI_SLOT(devfn) == 0) - return 0; - return ((unsigned long)hose->cfg_data) + u3_ht_cfa0(devfn, offset); + return NULL; + return hose->cfg_data + u3_ht_cfa0(devfn, offset); } else - return ((unsigned long)hose->cfg_data) + u3_ht_cfa1(bus, devfn, offset); + return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset); } static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -232,13 +232,13 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_le16((u16 *)addr); + *val = in_le16(addr); break; default: - *val = in_le32((u32 *)addr); + *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -248,7 +248,7 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; - unsigned long addr; + volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) @@ -266,16 +266,16 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, */ switch (len) { case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); + out_8(addr, val); + (void) in_8(addr); break; case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); + out_le16(addr, val); + (void) in_le16(addr); break; default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); + out_le32(addr, val); + (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -315,7 +315,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + hose->cfg_data = ioremap(0xf2000000, 0x02000000); hose->first_busno = 0; hose->last_busno = 0xef; diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 84bc8f7e17e..3c2d63ebf78 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -225,6 +225,7 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag) void eeh_mark_slot (struct device_node *dn, int mode_flag) { + struct pci_dev *dev; dn = find_device_pe (dn); /* Back up one, since config addrs might be shared */ @@ -232,6 +233,12 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag) dn = dn->parent; PCI_DN(dn)->eeh_mode |= mode_flag; + + /* Mark the pci device too */ + dev = PCI_DN(dn)->pcidev; + if (dev) + dev->error_state = pci_channel_io_frozen; + __eeh_mark_slot (dn->child, mode_flag); } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 98189d8efac..43dbf737698 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -415,12 +415,6 @@ static int pSeries_check_legacy_ioport(unsigned int baseport) return -ENODEV; of_node_put(np); break; - case PARALLEL_BASE: - np = of_find_node_by_type(NULL, "parallel"); - if (np == NULL) - return -ENODEV; - of_node_put(np); - break; } return 0; } @@ -483,7 +477,6 @@ static void pseries_dedicated_idle_sleep(void) { unsigned int cpu = smp_processor_id(); unsigned long start_snooze; - unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); /* * Indicate to the HV that we are idle. Now would be @@ -496,9 +489,9 @@ static void pseries_dedicated_idle_sleep(void) * has been checked recently. If we should poll for a little * while, do so. */ - if (*smt_snooze_delay) { + if (__get_cpu_var(smt_snooze_delay)) { start_snooze = get_tb() + - *smt_snooze_delay * tb_ticks_per_usec; + __get_cpu_var(smt_snooze_delay) * tb_ticks_per_usec; local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); @@ -518,24 +511,7 @@ static void pseries_dedicated_idle_sleep(void) goto out; } - /* - * If not SMT, cede processor. If CPU is running SMT - * cede if the other thread is not idle, so that it can - * go single-threaded. If the other thread is idle, - * we ask the hypervisor if it has pending work it - * wants to do and cede if it does. Otherwise we keep - * polling in order to reduce interrupt latency. - * - * Doing the cede when the other thread is active will - * result in this thread going dormant, meaning the other - * thread gets to run in single-threaded (ST) mode, which - * is slightly faster than SMT mode with this thread at - * very low priority. The cede enables interrupts, which - * doesn't matter here. - */ - if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle - || poll_pending() == H_PENDING) - cede_processor(); + cede_processor(); out: HMT_medium(); diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index e5e999ea891..f15f4d78aee 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -17,3 +17,8 @@ ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o endif + +# Temporary hack until we have migrated to asm-powerpc +ifeq ($(ARCH),powerpc) +obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o +endif diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c new file mode 100644 index 00000000000..ec265995d5d --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -0,0 +1,309 @@ +/* + * General Purpose functions for the global management of the + * 8260 Communication Processor Module. + * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com> + * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) + * 2.3.99 Updates + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * + * In addition to the individual control of the communication + * channels, there are a few functions that globally affect the + * communication processor. + * + * Buffer descriptors must be allocated from the dual ported memory + * space. The allocator for that is here. When the communication + * process is reset, we reclaim the memory available. There is + * currently no deallocator for this memory. + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mpc8260.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/cpm2.h> +#include <asm/rheap.h> +#include <asm/fs_pd.h> + +#include <sysdev/fsl_soc.h> + +static void cpm2_dpinit(void); +cpm_cpm2_t *cpmp; /* Pointer to comm processor space */ + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +cpm2_map_t *cpm2_immr; +intctl_cpm2_t *cpm2_intctl; + +#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount + of space for CPM as it is larger + than on PQ2 */ + +void +cpm2_reset(void) +{ + cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + cpm2_intctl = cpm2_map(im_intctl); + + /* Reclaim the DP memory for our use. + */ + cpm2_dpinit(); + + /* Tell everyone where the comm processor resides. + */ + cpmp = &cpm2_immr->im_cpm; +} + +/* Set a baud rate generator. This needs lots of work. There are + * eight BRGs, which can be connected to the CPM channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The baud rate clock is the system clock divided by something. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +#define BRG_INT_CLK (get_brgfreq()) +#define BRG_UART_CLK (BRG_INT_CLK/16) + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +void +cpm_setbrg(uint brg, uint rate) +{ + volatile uint *bp; + + /* This is good enough to get SMCs running..... + */ + if (brg < 4) { + bp = cpm2_map_size(im_brgc1, 16); + } else { + bp = cpm2_map_size(im_brgc5, 16); + brg -= 4; + } + bp += brg; + *bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN; + + cpm2_unmap(bp); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +void +cpm2_fastbrg(uint brg, uint rate, int div16) +{ + volatile uint *bp; + + if (brg < 4) { + bp = cpm2_map_size(im_brgc1, 16); + } + else { + bp = cpm2_map_size(im_brgc5, 16); + brg -= 4; + } + bp += brg; + *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + if (div16) + *bp |= CPM_BRG_DIV16; + + cpm2_unmap(bp); +} + +int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) +{ + int ret = 0; + int shift; + int i, bits = 0; + cpmux_t *im_cpmux; + u32 *reg; + u32 mask = 7; + u8 clk_map [24][3] = { + {CPM_CLK_FCC1, CPM_BRG5, 0}, + {CPM_CLK_FCC1, CPM_BRG6, 1}, + {CPM_CLK_FCC1, CPM_BRG7, 2}, + {CPM_CLK_FCC1, CPM_BRG8, 3}, + {CPM_CLK_FCC1, CPM_CLK9, 4}, + {CPM_CLK_FCC1, CPM_CLK10, 5}, + {CPM_CLK_FCC1, CPM_CLK11, 6}, + {CPM_CLK_FCC1, CPM_CLK12, 7}, + {CPM_CLK_FCC2, CPM_BRG5, 0}, + {CPM_CLK_FCC2, CPM_BRG6, 1}, + {CPM_CLK_FCC2, CPM_BRG7, 2}, + {CPM_CLK_FCC2, CPM_BRG8, 3}, + {CPM_CLK_FCC2, CPM_CLK13, 4}, + {CPM_CLK_FCC2, CPM_CLK14, 5}, + {CPM_CLK_FCC2, CPM_CLK15, 6}, + {CPM_CLK_FCC2, CPM_CLK16, 7}, + {CPM_CLK_FCC3, CPM_BRG5, 0}, + {CPM_CLK_FCC3, CPM_BRG6, 1}, + {CPM_CLK_FCC3, CPM_BRG7, 2}, + {CPM_CLK_FCC3, CPM_BRG8, 3}, + {CPM_CLK_FCC3, CPM_CLK13, 4}, + {CPM_CLK_FCC3, CPM_CLK14, 5}, + {CPM_CLK_FCC3, CPM_CLK15, 6}, + {CPM_CLK_FCC3, CPM_CLK16, 7} + }; + + im_cpmux = cpm2_map(im_cpmux); + + switch (target) { + case CPM_CLK_SCC1: + reg = &im_cpmux->cmx_scr; + shift = 24; + case CPM_CLK_SCC2: + reg = &im_cpmux->cmx_scr; + shift = 16; + break; + case CPM_CLK_SCC3: + reg = &im_cpmux->cmx_scr; + shift = 8; + break; + case CPM_CLK_SCC4: + reg = &im_cpmux->cmx_scr; + shift = 0; + break; + case CPM_CLK_FCC1: + reg = &im_cpmux->cmx_fcr; + shift = 24; + break; + case CPM_CLK_FCC2: + reg = &im_cpmux->cmx_fcr; + shift = 16; + break; + case CPM_CLK_FCC3: + reg = &im_cpmux->cmx_fcr; + shift = 8; + break; + default: + printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n"); + return -EINVAL; + } + + if (mode == CPM_CLK_RX) + shift +=3; + + for (i=0; i<24; i++) { + if (clk_map[i][0] == target && clk_map[i][1] == clock) { + bits = clk_map[i][2]; + break; + } + } + if (i == sizeof(clk_map)/3) + ret = -EINVAL; + + bits <<= shift; + mask <<= shift; + out_be32(reg, (in_be32(reg) & ~mask) | bits); + + cpm2_unmap(im_cpmux); + return ret; +} + +/* + * dpalloc / dpfree bits. + */ +static spinlock_t cpm_dpmem_lock; +/* 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... */ +static rh_block_t cpm_boot_dpmem_rh_block[16]; +static rh_info_t cpm_dpmem_info; +static u8* im_dprambase; + +static void cpm2_dpinit(void) +{ + spin_lock_init(&cpm_dpmem_lock); + + im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE); + + /* initialize the info header */ + rh_init(&cpm_dpmem_info, 1, + sizeof(cpm_boot_dpmem_rh_block) / + sizeof(cpm_boot_dpmem_rh_block[0]), + cpm_boot_dpmem_rh_block); + + /* Attach the usable dpmem area */ + /* XXX: This is actually crap. CPM_DATAONLY_BASE and + * CPM_DATAONLY_SIZE is only a subset of the available dpram. It + * varies with the processor and the microcode patches activated. + * But the following should be at least safe. + */ + rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, + CPM_DATAONLY_SIZE); +} + +/* This function returns an index into the DPRAM area. + */ +uint cpm_dpalloc(uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc(&cpm_dpmem_info, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc); + +int cpm_dpfree(uint offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + ret = rh_free(&cpm_dpmem_info, (void *)offset); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return ret; +} +EXPORT_SYMBOL(cpm_dpfree); + +/* not sure if this is ever needed */ +uint cpm_dpalloc_fixed(uint offset, uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc_fixed); + +void cpm_dpdump(void) +{ + rh_dump(&cpm_dpmem_info); +} +EXPORT_SYMBOL(cpm_dpdump); + +void *cpm_dpram_addr(uint offset) +{ + return (void *)(im_dprambase + offset); +} +EXPORT_SYMBOL(cpm_dpram_addr); diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c new file mode 100644 index 00000000000..51752990f7b --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -0,0 +1,256 @@ +/* + * Platform information definitions. + * + * Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates + * to make in work in arch/powerpc/. Original (c) belongs to Dan Malek. + * + * Author: Vitaly Bordug <vbordug@ru.mvista.com> + * + * 1999-2001 (c) Dan Malek <dan@embeddedalley.com> + * 2006 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* The CPM2 internal interrupt controller. It is usually + * the only interrupt controller. + * There are two 32-bit registers (high/low) for up to 64 + * possible interrupts. + * + * Now, the fun starts.....Interrupt Numbers DO NOT MAP + * in a simple arithmetic fashion to mask or pending registers. + * That is, interrupt 4 does not map to bit position 4. + * We create two tables, indexed by vector number, to indicate + * which register to use and which bit in the register to use. + */ + +#include <linux/stddef.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/irq.h> + +#include <asm/immap_cpm2.h> +#include <asm/mpc8260.h> +#include <asm/io.h> +#include <asm/prom.h> + +#include "cpm2_pic.h" + +static struct device_node *cpm2_pic_node; +static struct irq_host *cpm2_pic_host; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; + +static const u_char irq_to_siureg[] = { + 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* bit numbers do not match the docs, these are precomputed so the bit for + * a given irq is (1 << irq_to_siubit[irq]) */ +static const u_char irq_to_siubit[] = { + 0, 15, 14, 13, 12, 11, 10, 9, + 8, 7, 6, 5, 4, 3, 2, 1, + 2, 1, 0, 14, 13, 12, 11, 10, + 9, 8, 7, 6, 5, 4, 3, 0, + 31, 30, 29, 28, 27, 26, 25, 24, + 23, 22, 21, 20, 19, 18, 17, 16, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, +}; + +static void cpm2_mask_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + ppc_cached_irq_mask[word] &= ~(1 << bit); + simr[word] = ppc_cached_irq_mask[word]; +} + +static void cpm2_unmask_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + ppc_cached_irq_mask[word] |= 1 << bit; + simr[word] = ppc_cached_irq_mask[word]; +} + +static void cpm2_mask_and_ack(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr, *sipnr; + + irq_nr -= CPM_IRQ_OFFSET; + + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + sipnr = &(cpm2_intctl->ic_sipnrh); + ppc_cached_irq_mask[word] &= ~(1 << bit); + simr[word] = ppc_cached_irq_mask[word]; + sipnr[word] = 1 << bit; +} + +static void cpm2_end_irq(unsigned int irq_nr) +{ + int bit, word; + volatile uint *simr; + + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) + && irq_desc[irq_nr].action) { + + irq_nr -= CPM_IRQ_OFFSET; + bit = irq_to_siubit[irq_nr]; + word = irq_to_siureg[irq_nr]; + + simr = &(cpm2_intctl->ic_simrh); + ppc_cached_irq_mask[word] |= 1 << bit; + simr[word] = ppc_cached_irq_mask[word]; + /* + * Work around large numbers of spurious IRQs on PowerPC 82xx + * systems. + */ + mb(); + } +} + +static struct irq_chip cpm2_pic = { + .typename = " CPM2 SIU ", + .enable = cpm2_unmask_irq, + .disable = cpm2_mask_irq, + .unmask = cpm2_unmask_irq, + .mask_ack = cpm2_mask_and_ack, + .end = cpm2_end_irq, +}; + +int cpm2_get_irq(struct pt_regs *regs) +{ + int irq; + unsigned long bits; + + /* For CPM2, read the SIVEC register and shift the bits down + * to get the irq number. */ + bits = cpm2_intctl->ic_sivec; + irq = bits >> 26; + + if (irq == 0) + return(-1); + return irq+CPM_IRQ_OFFSET; +} + +static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return cpm2_pic_node == NULL || cpm2_pic_node == node; +} + +static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw); + + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq); + return 0; +} + +static void cpm2_host_unmap(struct irq_host *h, unsigned int virq) +{ + /* Make sure irq is masked in hardware */ + cpm2_mask_irq(virq); + + /* remove chip and handler */ + set_irq_chip_and_handler(virq, NULL, NULL); +} + +static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static const unsigned char map_cpm2_senses[4] = { + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_RISING, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_cpm2_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + +static struct irq_host_ops cpm2_pic_host_ops = { + .match = cpm2_pic_host_match, + .map = cpm2_pic_host_map, + .unmap = cpm2_host_unmap, + .xlate = cpm2_pic_host_xlate, +}; + +void cpm2_pic_init(struct device_node *node) +{ + int i; + + /* Clear the CPM IRQ controller, in case it has any bits set + * from the bootloader + */ + + /* Mask out everything */ + + cpm2_intctl->ic_simrh = 0x00000000; + cpm2_intctl->ic_simrl = 0x00000000; + + wmb(); + + /* Ack everything */ + cpm2_intctl->ic_sipnrh = 0xffffffff; + cpm2_intctl->ic_sipnrl = 0xffffffff; + wmb(); + + /* Dummy read of the vector */ + i = cpm2_intctl->ic_sivec; + rmb(); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + cpm2_intctl->ic_sicr = 0; + cpm2_intctl->ic_scprrh = 0x05309770; + cpm2_intctl->ic_scprrl = 0x05309770; + + /* create a legacy host */ + if (node) + cpm2_pic_node = of_node_get(node); + + cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64); + if (cpm2_pic_host == NULL) { + printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); + return; + } +} diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h new file mode 100644 index 00000000000..d63e45d4df5 --- /dev/null +++ b/arch/powerpc/sysdev/cpm2_pic.h @@ -0,0 +1,10 @@ +#ifndef _PPC_KERNEL_CPM2_H +#define _PPC_KERNEL_CPM2_H + +extern intctl_cpm2_t *cpm2_intctl; + +extern int cpm2_get_irq(struct pt_regs *regs); + +extern void cpm2_pic_init(struct device_node*); + +#endif /* _PPC_KERNEL_CPM2_H */ diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 92ba378b799..022ed275ea6 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -3,6 +3,9 @@ * * Maintained by Kumar Gala (see MAINTAINERS for contact information) * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -20,15 +23,20 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/fsl_devices.h> +#include <linux/fs_enet_pd.h> +#include <linux/fs_uart_pd.h> #include <asm/system.h> #include <asm/atomic.h> #include <asm/io.h> #include <asm/irq.h> +#include <asm/time.h> #include <asm/prom.h> #include <sysdev/fsl_soc.h> #include <mm/mmu_decl.h> +#include <asm/cpm2.h> +extern void init_fcc_ioports(struct fs_platform_info*); static phys_addr_t immrbase = -1; phys_addr_t get_immrbase(void) @@ -42,7 +50,9 @@ phys_addr_t get_immrbase(void) if (soc) { unsigned int size; const void *prop = get_property(soc, "reg", &size); - immrbase = of_translate_address(soc, prop); + + if (prop) + immrbase = of_translate_address(soc, prop); of_node_put(soc); }; @@ -51,6 +61,59 @@ phys_addr_t get_immrbase(void) EXPORT_SYMBOL(get_immrbase); +#ifdef CONFIG_CPM2 + +static u32 brgfreq = -1; + +u32 get_brgfreq(void) +{ + struct device_node *node; + + if (brgfreq != -1) + return brgfreq; + + node = of_find_node_by_type(NULL, "cpm"); + if (node) { + unsigned int size; + const unsigned int *prop = get_property(node, "brg-frequency", + &size); + + if (prop) + brgfreq = *prop; + of_node_put(node); + }; + + return brgfreq; +} + +EXPORT_SYMBOL(get_brgfreq); + +static u32 fs_baudrate = -1; + +u32 get_baudrate(void) +{ + struct device_node *node; + + if (fs_baudrate != -1) + return fs_baudrate; + + node = of_find_node_by_type(NULL, "serial"); + if (node) { + unsigned int size; + const unsigned int *prop = get_property(node, "current-speed", + &size); + + if (prop) + fs_baudrate = *prop; + of_node_put(node); + }; + + return fs_baudrate; +} + +EXPORT_SYMBOL(get_baudrate); +#endif /* CONFIG_CPM2 */ + static int __init gfar_mdio_of_init(void) { struct device_node *np; @@ -85,8 +148,11 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - const u32 *id = get_property(child, "reg", NULL); - mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); + int irq = irq_of_parse_and_map(child, 0); + if (irq != NO_IRQ) { + const u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq; + } } ret = @@ -128,7 +194,7 @@ static int __init gfar_of_init(void) const char *model; const void *mac_addr; const phandle *ph; - int n_res = 1; + int n_res = 2; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -159,7 +225,7 @@ static int __init gfar_of_init(void) gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - n_res + 1); + n_res); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); @@ -478,3 +544,208 @@ err: } arch_initcall(fsl_usb_of_init); + +#ifdef CONFIG_CPM2 + +static const char fcc_regs[] = "fcc_regs"; +static const char fcc_regs_c[] = "fcc_regs_c"; +static const char fcc_pram[] = "fcc_pram"; +static char bus_id[9][BUS_ID_SIZE]; + +static int __init fs_enet_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *fs_enet_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; + i++) { + struct resource r[4]; + struct device_node *phy, *mdio; + struct fs_platform_info fs_enet_data; + const unsigned int *id, *phy_addr; + const void *mac_addr; + const phandle *ph; + const char *model; + + memset(r, 0, sizeof(r)); + memset(&fs_enet_data, 0, sizeof(fs_enet_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + r[0].name = fcc_regs; + + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = fcc_pram; + + ret = of_address_to_resource(np, 2, &r[2]); + if (ret) + goto err; + r[2].name = fcc_regs_c; + + r[3].start = r[3].end = irq_of_parse_and_map(np, 0); + r[3].flags = IORESOURCE_IRQ; + + fs_enet_dev = + platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4); + + if (IS_ERR(fs_enet_dev)) { + ret = PTR_ERR(fs_enet_dev); + goto err; + } + + model = get_property(np, "model", NULL); + if (model == NULL) { + ret = -ENODEV; + goto unreg; + } + + mac_addr = get_property(np, "mac-address", NULL); + memcpy(fs_enet_data.macaddr, mac_addr, 6); + + ph = get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + ret = -ENODEV; + goto unreg; + } + + phy_addr = get_property(phy, "reg", NULL); + fs_enet_data.phy_addr = *phy_addr; + + id = get_property(np, "device-id", NULL); + fs_enet_data.fs_no = *id; + strcpy(fs_enet_data.fs_type, model); + + mdio = of_get_parent(phy); + ret = of_address_to_resource(mdio, 0, &res); + if (ret) { + of_node_put(phy); + of_node_put(mdio); + goto unreg; + } + + fs_enet_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); + fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); + + if (strstr(model, "FCC")) { + int fcc_index = *id - 1; + + fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0); + fs_enet_data.rx_ring = 32; + fs_enet_data.tx_ring = 32; + fs_enet_data.rx_copybreak = 240; + fs_enet_data.use_napi = 0; + fs_enet_data.napi_weight = 17; + fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index); + fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index); + fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index); + + snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x", + (u32)res.start, fs_enet_data.phy_addr); + fs_enet_data.bus_id = (char*)&bus_id[(*id)]; + fs_enet_data.init_ioports = init_fcc_ioports; + } + + of_node_put(phy); + of_node_put(mdio); + + ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, + sizeof(struct + fs_platform_info)); + if (ret) + goto unreg; + } + return 0; + +unreg: + platform_device_unregister(fs_enet_dev); +err: + return ret; +} + +arch_initcall(fs_enet_of_init); + +static const char scc_regs[] = "regs"; +static const char scc_pram[] = "pram"; + +static int __init cpm_uart_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *cpm_uart_dev; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; + i++) { + struct resource r[3]; + struct fs_uart_platform_info cpm_uart_data; + const int *id; + const char *model; + + memset(r, 0, sizeof(r)); + memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + + r[0].name = scc_regs; + + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = scc_pram; + + r[2].start = r[2].end = irq_of_parse_and_map(np, 0); + r[2].flags = IORESOURCE_IRQ; + + cpm_uart_dev = + platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3); + + if (IS_ERR(cpm_uart_dev)) { + ret = PTR_ERR(cpm_uart_dev); + goto err; + } + + id = get_property(np, "device-id", NULL); + cpm_uart_data.fs_no = *id; + + model = (char*)get_property(np, "model", NULL); + strcpy(cpm_uart_data.fs_type, model); + + cpm_uart_data.uart_clk = ppc_proc_freq; + + cpm_uart_data.tx_num_fifo = 4; + cpm_uart_data.tx_buf_size = 32; + cpm_uart_data.rx_num_fifo = 4; + cpm_uart_data.rx_buf_size = 32; + cpm_uart_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); + cpm_uart_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); + + ret = + platform_device_add_data(cpm_uart_dev, &cpm_uart_data, + sizeof(struct + fs_uart_platform_info)); + if (ret) + goto unreg; + } + + return 0; + +unreg: + platform_device_unregister(cpm_uart_dev); +err: + return ret; +} + +arch_initcall(cpm_uart_of_init); +#endif /* CONFIG_CPM2 */ diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 5a3dd480d2f..04e145b5fc3 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -5,6 +5,8 @@ #include <asm/mmu.h> extern phys_addr_t get_immrbase(void); +extern u32 get_brgfreq(void); +extern u32 get_baudrate(void); #endif #endif diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c index 29115e01f60..1640c4199ca 100644 --- a/arch/ppc/boot/utils/mkbugboot.c +++ b/arch/ppc/boot/utils/mkbugboot.c @@ -19,36 +19,13 @@ #include <stdlib.h> #include <errno.h> #include <fcntl.h> +#include <netinet/in.h> #ifdef __sun__ #include <inttypes.h> #else #include <stdint.h> #endif -#ifdef __i386__ -#define cpu_to_be32(x) le32_to_cpu(x) -#define cpu_to_be16(x) le16_to_cpu(x) -#else -#define cpu_to_be32(x) (x) -#define cpu_to_be16(x) (x) -#endif - -#define cpu_to_le32(x) le32_to_cpu((x)) -unsigned long le32_to_cpu(unsigned long x) -{ - return (((x & 0x000000ffU) << 24) | - ((x & 0x0000ff00U) << 8) | - ((x & 0x00ff0000U) >> 8) | - ((x & 0xff000000U) >> 24)); -} - -#define cpu_to_le16(x) le16_to_cpu((x)) -unsigned short le16_to_cpu(unsigned short x) -{ - return (((x & 0x00ff) << 8) | - ((x & 0xff00) >> 8)); -} - /* size of read buffer */ #define SIZE 0x1000 @@ -62,124 +39,109 @@ typedef struct bug_boot_header { #define HEADER_SIZE sizeof(bug_boot_header_t) -uint32_t copy_image(int32_t in_fd, int32_t out_fd) +void update_checksum(void *buf, size_t size, uint16_t *sum) { - uint8_t buf[SIZE]; - int n; - uint32_t image_size = 0; - uint8_t zero = 0; - - lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET); - - /* Copy an image while recording its size */ - while ( (n = read(in_fd, buf, SIZE)) > 0 ) - { - image_size = image_size + n; - write(out_fd, buf, n); - } - - /* BUG romboot requires that our size is divisible by 2 */ - /* align image to 2 byte boundary */ - if (image_size % 2) - { - image_size++; - write(out_fd, &zero, 1); - } - - return image_size; + uint32_t csum = *sum; + + while (size) { + csum += *(uint16_t *)buf; + if (csum > 0xffff) + csum -= 0xffff; + buf = (uint16_t *)buf + 1; + size -= 2; + } + *sum = csum; } -void write_bugboot_header(int32_t out_fd, uint32_t boot_size) +uint32_t copy_image(int in_fd, int out_fd, uint16_t *sum) { - uint8_t header_block[HEADER_SIZE]; - bug_boot_header_t *bbh = (bug_boot_header_t *)&header_block[0]; - - memset(header_block, 0, HEADER_SIZE); - - /* Fill in the PPCBUG ROM boot header */ - strncpy(bbh->magic_word, "BOOT", 4); /* PPCBUG magic word */ - bbh->entry_offset = cpu_to_be32(HEADER_SIZE); /* Entry address */ - bbh->routine_length= cpu_to_be32(HEADER_SIZE+boot_size+2); /* Routine length */ - strncpy(bbh->routine_name, "LINUXROM", 8); /* Routine name */ - - /* Output the header and bootloader to the file */ - write(out_fd, header_block, HEADER_SIZE); + uint8_t buf[SIZE]; + int offset = 0; + int n; + uint32_t image_size = 0; + + lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET); + + /* Copy an image while recording its size */ + while ( (n = read(in_fd, buf + offset, SIZE - offset)) > 0 ) { + n += offset; + offset = n & 1; + n -= offset; + image_size = image_size + n; + /* who's going to deal with short writes? */ + write(out_fd, buf, n); + update_checksum(buf, n, sum); + if (offset) + buf[0] = buf[n]; + } + + /* BUG romboot requires that our size is divisible by 2 */ + /* align image to 2 byte boundary */ + if (offset) { + image_size += 2; + buf[1] = '\0'; + write(out_fd, buf, 2); + update_checksum(buf, 2, sum); + } + return image_size; } -uint16_t calc_checksum(int32_t bug_fd) +void write_bugboot_header(int out_fd, uint32_t boot_size, uint16_t *sum) { - uint32_t checksum_var = 0; - uint8_t buf[2]; - int n; - - /* Checksum loop */ - while ( (n = read(bug_fd, buf, 2) ) ) - { - checksum_var = checksum_var + *(uint16_t *)buf; - - /* If we carry out, mask it and add one to the checksum */ - if (checksum_var >> 16) - checksum_var = (checksum_var & 0x0000ffff) + 1; - } - - return checksum_var; + static bug_boot_header_t bbh = { + .magic_word = "BOOT", + .routine_name = "LINUXROM" + }; + + /* Fill in the PPCBUG ROM boot header */ + bbh.entry_offset = htonl(HEADER_SIZE); /* Entry address */ + bbh.routine_length= htonl(HEADER_SIZE+boot_size+2); /* Routine length */ + + /* Output the header and bootloader to the file */ + write(out_fd, &bbh, sizeof(bug_boot_header_t)); + update_checksum(&bbh, sizeof(bug_boot_header_t), sum); } int main(int argc, char *argv[]) { - int32_t image_fd, bugboot_fd; - int argptr = 1; - uint32_t kernel_size = 0; - uint16_t checksum = 0; - uint8_t bugbootname[256]; - - if ( (argc != 3) ) - { - fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]); - exit(-1); - } - - /* Get file args */ - - /* kernel image file */ - if ((image_fd = open( argv[argptr] , 0)) < 0) - exit(-1); - argptr++; + int image_fd, bugboot_fd; + uint32_t kernel_size = 0; + uint16_t checksum = 0; - /* bugboot file */ - if ( !strcmp( argv[argptr], "-" ) ) - bugboot_fd = 1; /* stdout */ - else - if ((bugboot_fd = creat( argv[argptr] , 0755)) < 0) - exit(-1); - else - strcpy(bugbootname, argv[argptr]); - argptr++; + if (argc != 3) { + fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]); + exit(-1); + } - /* Set file position after ROM header block where zImage will be written */ - lseek(bugboot_fd, HEADER_SIZE, SEEK_SET); + /* Get file args */ - /* Copy kernel image into bugboot image */ - kernel_size = copy_image(image_fd, bugboot_fd); - close(image_fd); + /* kernel image file */ + if ((image_fd = open(argv[1] , 0)) < 0) + exit(-1); - /* Set file position to beginning where header/romboot will be written */ - lseek(bugboot_fd, 0, SEEK_SET); + /* bugboot file */ + if (!strcmp(argv[2], "-")) + bugboot_fd = 1; /* stdout */ + else if ((bugboot_fd = creat(argv[2] , 0755)) < 0) + exit(-1); - /* Write out BUG header/romboot */ - write_bugboot_header(bugboot_fd, kernel_size); + /* Set file position after ROM header block where zImage will be written */ + lseek(bugboot_fd, HEADER_SIZE, SEEK_SET); - /* Close bugboot file */ - close(bugboot_fd); + /* Copy kernel image into bugboot image */ + kernel_size = copy_image(image_fd, bugboot_fd, &checksum); - /* Reopen it as read/write */ - bugboot_fd = open(bugbootname, O_RDWR); + /* Set file position to beginning where header/romboot will be written */ + lseek(bugboot_fd, 0, SEEK_SET); - /* Calculate checksum */ - checksum = calc_checksum(bugboot_fd); + /* Write out BUG header/romboot */ + write_bugboot_header(bugboot_fd, kernel_size, &checksum); - /* Write out the calculated checksum */ - write(bugboot_fd, &checksum, 2); + /* Write out the calculated checksum */ + lseek(bugboot_fd, 0, SEEK_END); + write(bugboot_fd, &checksum, 2); - return 0; + /* Close bugboot file */ + close(bugboot_fd); + return 0; } diff --git a/arch/ppc/boot/utils/mkprep.c b/arch/ppc/boot/utils/mkprep.c index f6d5a2f2fcf..192bb397126 100644 --- a/arch/ppc/boot/utils/mkprep.c +++ b/arch/ppc/boot/utils/mkprep.c @@ -15,279 +15,227 @@ * Modified for Sparc hosted builds by Peter Wahl <PeterWahl@web.de> */ -#include <fcntl.h> #include <stdio.h> -#include <stdlib.h> #include <string.h> -#include <strings.h> -#include <sys/stat.h> -#include <unistd.h> - -#define cpu_to_le32(x) le32_to_cpu((x)) -unsigned long le32_to_cpu(unsigned long x) -{ - return (((x & 0x000000ffU) << 24) | - ((x & 0x0000ff00U) << 8) | - ((x & 0x00ff0000U) >> 8) | - ((x & 0xff000000U) >> 24)); -} - - -#define cpu_to_le16(x) le16_to_cpu((x)) -unsigned short le16_to_cpu(unsigned short x) -{ - return (((x & 0x00ff) << 8) | - ((x & 0xff00) >> 8)); -} - -#define cpu_to_be32(x) (x) -#define be32_to_cpu(x) (x) -#define cpu_to_be16(x) (x) -#define be16_to_cpu(x) (x) +#include <stdlib.h> /* size of read buffer */ #define SIZE 0x1000 - -typedef unsigned long dword_t; -typedef unsigned short word_t; -typedef unsigned char byte_t; -typedef byte_t block_t[512]; -typedef byte_t page_t[4096]; - - /* * Partition table entry * - from the PReP spec */ typedef struct partition_entry { - byte_t boot_indicator; - byte_t starting_head; - byte_t starting_sector; - byte_t starting_cylinder; - - byte_t system_indicator; - byte_t ending_head; - byte_t ending_sector; - byte_t ending_cylinder; - - dword_t beginning_sector; - dword_t number_of_sectors; + unsigned char boot_indicator; + unsigned char starting_head; + unsigned char starting_sector; + unsigned char starting_cylinder; + + unsigned char system_indicator; + unsigned char ending_head; + unsigned char ending_sector; + unsigned char ending_cylinder; + + unsigned char beginning_sector[4]; + unsigned char number_of_sectors[4]; } partition_entry_t; #define BootActive 0x80 #define SystemPrep 0x41 -void copy_image(int , int); -void write_prep_partition(int , int ); -void write_asm_data( int in, int out ); +void copy_image(FILE *, FILE *); +void write_prep_partition(FILE *, FILE *); +void write_asm_data(FILE *, FILE *); unsigned int elfhdr_size = 65536; int main(int argc, char *argv[]) { - int in_fd, out_fd; - int argptr = 1; - unsigned int prep = 0; - unsigned int asmoutput = 0; - - if ( (argc < 3) || (argc > 4) ) - { - fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n",argv[0]); - exit(-1); - } - - /* needs to handle args more elegantly -- but this is a small/simple program */ - - /* check for -pbp */ - if ( !strcmp( argv[argptr], "-pbp" ) ) - { - prep = 1; - argptr++; - } - - /* check for -asm */ - if ( !strcmp( argv[argptr], "-asm" ) ) - { - asmoutput = 1; - argptr++; - } - - /* input file */ - if ( !strcmp( argv[argptr], "-" ) ) - in_fd = 0; /* stdin */ - else - if ((in_fd = open( argv[argptr] , 0)) < 0) - exit(-1); - argptr++; - - /* output file */ - if ( !strcmp( argv[argptr], "-" ) ) - out_fd = 1; /* stdout */ - else - if ((out_fd = creat( argv[argptr] , 0755)) < 0) - exit(-1); - argptr++; - - /* skip elf header in input file */ - /*if ( !prep )*/ - lseek(in_fd, elfhdr_size, SEEK_SET); - - /* write prep partition if necessary */ - if ( prep ) - write_prep_partition( in_fd, out_fd ); - - /* write input image to bootimage */ - if ( asmoutput ) - write_asm_data( in_fd, out_fd ); - else - copy_image(in_fd, out_fd); - - return 0; + FILE *in, *out; + int argptr = 1; + int prep = 0; + int asmoutput = 0; + + if (argc < 3 || argc > 4) { + fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n", + argv[0]); + exit(-1); + } + +/* needs to handle args more elegantly -- but this is a small/simple program */ + + /* check for -pbp */ + if (!strcmp(argv[argptr], "-pbp")) { + prep = 1; + argptr++; + } + + /* check for -asm */ + if (!strcmp(argv[argptr], "-asm")) { + asmoutput = 1; + argptr++; + } + + /* input file */ + if (!strcmp(argv[argptr], "-")) + in = stdin; + else if (!(in = fopen(argv[argptr], "r"))) + exit(-1); + argptr++; + + /* output file */ + if (!strcmp(argv[argptr], "-")) + out = stdout; + else if (!(out = fopen(argv[argptr], "w"))) + exit(-1); + argptr++; + + /* skip elf header in input file */ + /*if ( !prep )*/ + fseek(in, elfhdr_size, SEEK_SET); + + /* write prep partition if necessary */ + if (prep) + write_prep_partition(in, out); + + /* write input image to bootimage */ + if (asmoutput) + write_asm_data(in, out); + else + copy_image(in, out); + + return 0; } -void write_prep_partition(int in, int out) +void store_le32(unsigned int v, unsigned char *p) { - unsigned char block[512]; - partition_entry_t pe; - dword_t *entry = (dword_t *)&block[0]; - dword_t *length = (dword_t *)&block[sizeof(long)]; - struct stat info; - - if (fstat(in, &info) < 0) - { - fprintf(stderr,"info failed\n"); - exit(-1); - } - - bzero( block, sizeof block ); - - /* set entry point and boot image size skipping over elf header */ -#ifdef __i386__ - *entry = 0x400/*+65536*/; - *length = info.st_size-elfhdr_size+0x400; -#else - *entry = cpu_to_le32(0x400/*+65536*/); - *length = cpu_to_le32(info.st_size-elfhdr_size+0x400); -#endif /* __i386__ */ - - /* sets magic number for msdos partition (used by linux) */ - block[510] = 0x55; - block[511] = 0xAA; - - /* - * Build a "PReP" partition table entry in the boot record - * - "PReP" may only look at the system_indicator - */ - pe.boot_indicator = BootActive; - pe.system_indicator = SystemPrep; - /* - * The first block of the diskette is used by this "boot record" which - * actually contains the partition table. (The first block of the - * partition contains the boot image, but I digress...) We'll set up - * one partition on the diskette and it shall contain the rest of the - * diskette. - */ - pe.starting_head = 0; /* zero-based */ - pe.starting_sector = 2; /* one-based */ - pe.starting_cylinder = 0; /* zero-based */ - pe.ending_head = 1; /* assumes two heads */ - pe.ending_sector = 18; /* assumes 18 sectors/track */ - pe.ending_cylinder = 79; /* assumes 80 cylinders/diskette */ - - /* - * The "PReP" software ignores the above fields and just looks at - * the next two. - * - size of the diskette is (assumed to be) - * (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette) - * - unlike the above sector numbers, the beginning sector is zero-based! - */ + p[0] = v; + p[1] = v >>= 8; + p[2] = v >>= 8; + p[3] = v >> 8; +} + +void write_prep_partition(FILE *in, FILE *out) +{ + unsigned char block[512]; + partition_entry_t pe; + unsigned char *entry = block; + unsigned char *length = block + 4; + long pos = ftell(in), size; + + if (fseek(in, 0, SEEK_END) < 0) { + fprintf(stderr,"info failed\n"); + exit(-1); + } + size = ftell(in); + if (fseek(in, pos, SEEK_SET) < 0) { + fprintf(stderr,"info failed\n"); + exit(-1); + } + + memset(block, '\0', sizeof(block)); + + /* set entry point and boot image size skipping over elf header */ + store_le32(0x400/*+65536*/, entry); + store_le32(size-elfhdr_size+0x400, length); + + /* sets magic number for msdos partition (used by linux) */ + block[510] = 0x55; + block[511] = 0xAA; + + /* + * Build a "PReP" partition table entry in the boot record + * - "PReP" may only look at the system_indicator + */ + pe.boot_indicator = BootActive; + pe.system_indicator = SystemPrep; + /* + * The first block of the diskette is used by this "boot record" which + * actually contains the partition table. (The first block of the + * partition contains the boot image, but I digress...) We'll set up + * one partition on the diskette and it shall contain the rest of the + * diskette. + */ + pe.starting_head = 0; /* zero-based */ + pe.starting_sector = 2; /* one-based */ + pe.starting_cylinder = 0; /* zero-based */ + pe.ending_head = 1; /* assumes two heads */ + pe.ending_sector = 18; /* assumes 18 sectors/track */ + pe.ending_cylinder = 79; /* assumes 80 cylinders/diskette */ + + /* + * The "PReP" software ignores the above fields and just looks at + * the next two. + * - size of the diskette is (assumed to be) + * (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette) + * - unlike the above sector numbers, the beginning sector is zero-based! + */ #if 0 - pe.beginning_sector = cpu_to_le32(1); -#else - /* This has to be 0 on the PowerStack? */ -#ifdef __i386__ - pe.beginning_sector = 0; + store_le32(1, pe.beginning_sector); #else - pe.beginning_sector = cpu_to_le32(0); -#endif /* __i386__ */ + /* This has to be 0 on the PowerStack? */ + store_le32(0, pe.beginning_sector); #endif -#ifdef __i386__ - pe.number_of_sectors = 2*18*80-1; -#else - pe.number_of_sectors = cpu_to_le32(2*18*80-1); -#endif /* __i386__ */ + store_le32(2*18*80-1, pe.number_of_sectors); - memcpy(&block[0x1BE], &pe, sizeof(pe)); + memcpy(&block[0x1BE], &pe, sizeof(pe)); - write( out, block, sizeof(block) ); - write( out, entry, sizeof(*entry) ); - write( out, length, sizeof(*length) ); - /* set file position to 2nd sector where image will be written */ - lseek( out, 0x400, SEEK_SET ); + fwrite(block, sizeof(block), 1, out); + fwrite(entry, 4, 1, out); + fwrite(length, 4, 1, out); + /* set file position to 2nd sector where image will be written */ + fseek( out, 0x400, SEEK_SET ); } -void -copy_image(int in, int out) +void copy_image(FILE *in, FILE *out) { - char buf[SIZE]; - int n; + char buf[SIZE]; + int n; - while ( (n = read(in, buf, SIZE)) > 0 ) - write(out, buf, n); + while ( (n = fread(buf, 1, SIZE, in)) > 0 ) + fwrite(buf, 1, n, out); } void -write_asm_data( int in, int out ) +write_asm_data(FILE *in, FILE *out) { - int i, cnt, pos, len; - unsigned int cksum, val; - unsigned char *lp; - unsigned char buf[SIZE]; - unsigned char str[256]; - - write( out, "\t.data\n\t.globl input_data\ninput_data:\n", - strlen( "\t.data\n\t.globl input_data\ninput_data:\n" ) ); - pos = 0; - cksum = 0; - while ((len = read(in, buf, sizeof(buf))) > 0) - { - cnt = 0; - lp = (unsigned char *)buf; - len = (len + 3) & ~3; /* Round up to longwords */ - for (i = 0; i < len; i += 4) - { - if (cnt == 0) - { - write( out, "\t.long\t", strlen( "\t.long\t" ) ); - } - sprintf( str, "0x%02X%02X%02X%02X", lp[0], lp[1], lp[2], lp[3]); - write( out, str, strlen(str) ); - val = *(unsigned long *)lp; - cksum ^= val; - lp += 4; - if (++cnt == 4) - { - cnt = 0; - sprintf( str, " # %x \n", pos+i-12); - write( out, str, strlen(str) ); - } else - { - write( out, ",", 1 ); - } - } - if (cnt) - { - write( out, "0\n", 2 ); - } - pos += len; - } - sprintf(str, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos); - write( out, str, strlen(str) ); - - fprintf(stderr, "cksum = %x\n", cksum); + int i, cnt, pos = 0; + unsigned int cksum = 0, val; + unsigned char *lp; + unsigned char buf[SIZE]; + size_t len; + + fputs("\t.data\n\t.globl input_data\ninput_data:\n", out); + while ((len = fread(buf, 1, sizeof(buf), in)) > 0) { + cnt = 0; + lp = buf; + /* Round up to longwords */ + while (len & 3) + buf[len++] = '\0'; + for (i = 0; i < len; i += 4) { + if (cnt == 0) + fputs("\t.long\t", out); + fprintf(out, "0x%02X%02X%02X%02X", + lp[0], lp[1], lp[2], lp[3]); + val = *(unsigned long *)lp; + cksum ^= val; + lp += 4; + if (++cnt == 4) { + cnt = 0; + fprintf(out, " # %x \n", pos+i-12); + } else { + fputs(",", out); + } + } + if (cnt) + fputs("0\n", out); + pos += len; + } + fprintf(out, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos); + fprintf(stderr, "cksum = %x\n", cksum); } diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index 2a35fe2b9b9..d5d36c372c8 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -103,7 +103,7 @@ static struct fs_platform_info mpc82xx_enet_pdata[] = { }, }; -static void init_fcc1_ioports(void) +static void init_fcc1_ioports(struct fs_platform_info*) { struct io_port *io; u32 tempval; @@ -144,7 +144,7 @@ static void init_fcc1_ioports(void) iounmap(immap); } -static void init_fcc2_ioports(void) +static void init_fcc2_ioports(struct fs_platform_info*) { cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32)); @@ -229,7 +229,7 @@ static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, } } -static void init_scc1_uart_ioports(void) +static void init_scc1_uart_ioports(struct fs_uart_platform_info*) { cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); @@ -246,7 +246,7 @@ static void init_scc1_uart_ioports(void) iounmap(immap); } -static void init_scc4_uart_ioports(void) +static void init_scc4_uart_ioports(struct fs_uart_platform_info*) { cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index e12cece4c9f..5f130dca377 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -137,7 +137,7 @@ void __init board_init(void) iounmap(bcsr_io); } -static void setup_fec1_ioports(void) +static void setup_fec1_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -145,7 +145,7 @@ static void setup_fec1_ioports(void) setbits16(&immap->im_ioport.iop_pddir, 0x1fff); } -static void setup_scc1_ioports(void) +static void setup_scc1_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -194,7 +194,7 @@ static void setup_scc1_ioports(void) } -static void setup_smc1_ioports(void) +static void setup_smc1_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -216,7 +216,7 @@ static void setup_smc1_ioports(void) } -static void setup_smc2_ioports(void) +static void setup_smc2_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index 5dfa4e6c2af..bf388ed04d4 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -161,7 +161,7 @@ void __init board_init(void) #endif } -static void setup_fec1_ioports(void) +static void setup_fec1_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -181,7 +181,7 @@ static void setup_fec1_ioports(void) clrbits32(&immap->im_cpm.cp_cptr, 0x00000100); } -static void setup_fec2_ioports(void) +static void setup_fec2_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -193,7 +193,7 @@ static void setup_fec2_ioports(void) clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); } -static void setup_scc3_ioports(void) +static void setup_scc3_ioports(struct fs_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -315,7 +315,7 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); } -static void setup_smc1_ioports(void) +static void setup_smc1_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; @@ -335,7 +335,7 @@ static void setup_smc1_ioports(void) clrbits16(&immap->im_cpm.cp_pbodr, iobits); } -static void setup_smc2_ioports(void) +static void setup_smc2_ioports(struct fs_uart_platform_info*) { immap_t *immap = (immap_t *) IMAP_ADDR; unsigned *bcsr_io; diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index c46e3d48e41..e15e1489aef 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -357,11 +357,16 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long high, unsigned int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) { + compat_ino_t ino; int err; if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev)) return -EOVERFLOW; + ino = stat->ino; + if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino) + return -EOVERFLOW; + err = put_user(old_encode_dev(stat->dev), &statbuf->st_dev); err |= put_user(stat->ino, &statbuf->st_ino); err |= put_user(stat->mode, &statbuf->st_mode); diff --git a/arch/sh64/configs/cayman_defconfig b/arch/sh64/configs/cayman_defconfig index 48f27407d5e..d81df574a7f 100644 --- a/arch/sh64/configs/cayman_defconfig +++ b/arch/sh64/configs/cayman_defconfig @@ -1,49 +1,62 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Fri Feb 25 18:14:31 2005 +# Linux kernel version: 2.6.18 +# Tue Oct 3 13:30:51 2006 # CONFIG_SUPERH=y CONFIG_SUPERH64=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y # CONFIG_SYSVIPC is not set CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -51,6 +64,27 @@ CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_MODULES is not set # +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# # System type # # CONFIG_SH_GENERIC is not set @@ -103,15 +137,23 @@ CONFIG_HEARTBEAT=y CONFIG_HDSP253_LED=y CONFIG_SH_DMA=y CONFIG_PREEMPT=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -CONFIG_SUPERHYWAY=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -119,10 +161,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set @@ -135,6 +173,92 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -145,6 +269,12 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -163,7 +293,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -176,18 +305,9 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -198,7 +318,9 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -209,6 +331,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -218,15 +341,18 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -234,40 +360,39 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -276,6 +401,9 @@ CONFIG_SCSI_QLA2XXX=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -288,70 +416,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options +# Network device support # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -364,6 +430,11 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -371,7 +442,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -385,6 +458,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -416,15 +490,22 @@ CONFIG_NET_PCI=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -447,6 +528,8 @@ CONFIG_NET_PCI=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -462,6 +545,7 @@ CONFIG_NET_PCI=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -476,19 +560,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -497,6 +568,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set @@ -506,11 +578,23 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -522,9 +606,11 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -551,7 +637,7 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -# CONFIG_RTC is not set +CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -564,14 +650,35 @@ CONFIG_WATCHDOG=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# # I2C support # # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # -# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -581,6 +688,7 @@ CONFIG_WATCHDOG=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -590,7 +698,13 @@ CONFIG_WATCHDOG=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -599,9 +713,10 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_EPSON1355 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -617,18 +732,20 @@ CONFIG_FB_KYRO=y # # Console display driver support # -# CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -650,12 +767,13 @@ CONFIG_LOGO_SUPERH_CLUT224=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # @@ -669,15 +787,51 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -687,17 +841,18 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -717,14 +872,14 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -748,12 +903,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -762,6 +919,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -781,6 +939,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -796,13 +955,32 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_DEBUG_KERNEL=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHEDSTATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set CONFIG_SH64_PROC_TLB=y @@ -824,14 +1002,12 @@ CONFIG_SH64_SR_WATCH=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/sparc/kernel/sys_sunos.c b/arch/sparc/kernel/sys_sunos.c index 9d2cd97d1c3..6f3ac548ee6 100644 --- a/arch/sparc/kernel/sys_sunos.c +++ b/arch/sparc/kernel/sys_sunos.c @@ -325,21 +325,25 @@ struct sunos_dirent_callback { #define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1)) static int sunos_filldir(void * __buf, const char * name, int namlen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct sunos_dirent __user *dirent; struct sunos_dirent_callback * buf = __buf; + unsigned long d_ino; int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1); buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; if (dirent) put_user(offset, &dirent->d_off); dirent = buf->curr; buf->previous = dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(namlen, &dirent->d_namlen); put_user(reclen, &dirent->d_reclen); copy_to_user(dirent->d_name, name, namlen); @@ -406,19 +410,23 @@ struct sunos_direntry_callback { }; static int sunos_filldirentry(void * __buf, const char * name, int namlen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct sunos_direntry __user *dirent; struct sunos_direntry_callback *buf = __buf; + unsigned long d_ino; int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1); buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; dirent = buf->curr; buf->previous = dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(namlen, &dirent->d_namlen); put_user(reclen, &dirent->d_reclen); copy_to_user(dirent->d_name, name, namlen); diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 0fbdaa5daa8..f54ab375464 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.18 -# Tue Sep 26 23:09:35 2006 +# Mon Oct 2 14:24:40 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -35,17 +35,20 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y -CONFIG_SYSCTL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -77,6 +80,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y # @@ -154,7 +158,7 @@ CONFIG_BINFMT_ELF32=y # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -# CONFIG_SOLARIS_EMUL is not set +CONFIG_SOLARIS_EMUL=y # CONFIG_CMDLINE_BOOL is not set # @@ -622,6 +626,7 @@ CONFIG_BNX2=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -644,6 +649,7 @@ CONFIG_KEYBOARD_SUNKBD=y CONFIG_KEYBOARD_LKKBD=m # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=y @@ -821,6 +827,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -1092,6 +1099,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -1123,6 +1131,7 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -1130,9 +1139,9 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set @@ -1256,8 +1265,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y @@ -1374,9 +1385,11 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set # CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_LKDTM is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index 708ba9b42cd..c45f21b881d 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -29,6 +29,7 @@ #include <asm/psrcompat.h> #include <asm/fpumacro.h> #include <asm/visasm.h> +#include <asm/compat_signal.h> #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 69444f266e2..e27cb71bd8e 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -61,6 +61,7 @@ #include <asm/semaphore.h> #include <asm/mmu_context.h> #include <asm/a.out.h> +#include <asm/compat_signal.h> asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group) { @@ -337,12 +338,17 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long high, unsigned int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) { + compat_ino_t ino; int err; if (stat->size > MAX_NON_LFS || !old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev)) return -EOVERFLOW; + ino = stat->ino; + if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino) + return -EOVERFLOW; + err = put_user(old_encode_dev(stat->dev), &statbuf->st_dev); err |= put_user(stat->ino, &statbuf->st_ino); err |= put_user(stat->mode, &statbuf->st_mode); diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c index 953296b73f3..7da72d3b322 100644 --- a/arch/sparc64/kernel/sys_sunos32.c +++ b/arch/sparc64/kernel/sys_sunos32.c @@ -43,6 +43,7 @@ #include <asm/idprom.h> /* for gethostid() */ #include <asm/unistd.h> #include <asm/system.h> +#include <asm/compat_signal.h> /* For the nfs mount emulation */ #include <linux/socket.h> @@ -280,16 +281,20 @@ static int sunos_filldir(void * __buf, const char * name, int namlen, struct sunos_dirent __user *dirent; struct sunos_dirent_callback * buf = (struct sunos_dirent_callback *) __buf; int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1); + u32 d_ino; buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; if (dirent) put_user(offset, &dirent->d_off); dirent = buf->curr; buf->previous = dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(namlen, &dirent->d_namlen); put_user(reclen, &dirent->d_reclen); if (copy_to_user(dirent->d_name, name, namlen)) @@ -363,14 +368,18 @@ static int sunos_filldirentry(void * __buf, const char * name, int namlen, struct sunos_direntry_callback * buf = (struct sunos_direntry_callback *) __buf; int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1); + u32 d_ino; buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; dirent = buf->curr; buf->previous = dirent; - put_user(ino, &dirent->d_ino); + put_user(d_ino, &dirent->d_ino); put_user(namlen, &dirent->d_namlen); put_user(reclen, &dirent->d_reclen); if (copy_to_user(dirent->d_name, name, namlen)) diff --git a/arch/sparc64/solaris/fs.c b/arch/sparc64/solaris/fs.c index 0f0eb6aa1c4..12a940cc791 100644 --- a/arch/sparc64/solaris/fs.c +++ b/arch/sparc64/solaris/fs.c @@ -82,12 +82,17 @@ struct sol_stat64 { static inline int putstat(struct sol_stat __user *ubuf, struct kstat *kbuf) { + u32 ino; + if (kbuf->size > MAX_NON_LFS || !sysv_valid_dev(kbuf->dev) || !sysv_valid_dev(kbuf->rdev)) return -EOVERFLOW; + ino = kbuf->ino; + if (sizeof(ino) < sizeof(kbuf->ino) && ino != kbuf->ino) + return -EOVERFLOW; if (put_user (sysv_encode_dev(kbuf->dev), &ubuf->st_dev) || - __put_user (kbuf->ino, &ubuf->st_ino) || + __put_user (ino, &ubuf->st_ino) || __put_user (kbuf->mode, &ubuf->st_mode) || __put_user (kbuf->nlink, &ubuf->st_nlink) || __put_user (kbuf->uid, &ubuf->st_uid) || diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index 26a01717cc1..c9bac3af29d 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -76,6 +76,8 @@ int cp_compat_stat(struct kstat *kbuf, struct compat_stat __user *ubuf) { + compat_ino_t ino; + typeof(ubuf->st_uid) uid = 0; typeof(ubuf->st_gid) gid = 0; SET_UID(uid, kbuf->uid); @@ -84,9 +86,12 @@ int cp_compat_stat(struct kstat *kbuf, struct compat_stat __user *ubuf) return -EOVERFLOW; if (kbuf->size >= 0x7fffffff) return -EOVERFLOW; + ino = kbuf->ino; + if (sizeof(ino) < sizeof(kbuf->ino) && ino != kbuf->ino) + return -EOVERFLOW; if (!access_ok(VERIFY_WRITE, ubuf, sizeof(struct compat_stat)) || __put_user (old_encode_dev(kbuf->dev), &ubuf->st_dev) || - __put_user (kbuf->ino, &ubuf->st_ino) || + __put_user (ino, &ubuf->st_ino) || __put_user (kbuf->mode, &ubuf->st_mode) || __put_user (kbuf->nlink, &ubuf->st_nlink) || __put_user (uid, &ubuf->st_uid) || diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 135ff25e6b4..6472e321cad 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -25,7 +25,6 @@ #include <linux/kernel_stat.h> #include <linux/sysdev.h> #include <linux/module.h> -#include <linux/ioport.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -46,11 +45,6 @@ int apic_calibrate_pmtmr __initdata; int disable_apic_timer __initdata; -static struct resource lapic_resource = { - .name = "Local APIC", - .flags = IORESOURCE_MEM | IORESOURCE_BUSY, -}; - /* * cpu_mask that denotes the CPUs that needs timer interrupt coming in as * IPIs in place of local APIC timers @@ -591,40 +585,6 @@ static int __init detect_init_APIC (void) return 0; } -#ifdef CONFIG_X86_IO_APIC -static struct resource * __init ioapic_setup_resources(void) -{ -#define IOAPIC_RESOURCE_NAME_SIZE 11 - unsigned long n; - struct resource *res; - char *mem; - int i; - - if (nr_ioapics <= 0) - return NULL; - - n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); - n *= nr_ioapics; - - res = alloc_bootmem(n); - - if (!res) - return NULL; - - memset(res, 0, n); - mem = (void *)&res[nr_ioapics]; - - for (i = 0; i < nr_ioapics; i++) { - res[i].name = mem; - res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; - snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); - mem += IOAPIC_RESOURCE_NAME_SIZE; - } - - return res; -} -#endif - void __init init_apic_mappings(void) { unsigned long apic_phys; @@ -644,11 +604,6 @@ void __init init_apic_mappings(void) apic_mapped = 1; apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys); - /* Put local APIC into the resource map. */ - lapic_resource.start = apic_phys; - lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; - insert_resource(&iomem_resource, &lapic_resource); - /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). @@ -658,9 +613,7 @@ void __init init_apic_mappings(void) { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; int i; - struct resource *ioapic_res; - ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { ioapic_phys = mp_ioapics[i].mpc_apicaddr; @@ -672,13 +625,6 @@ void __init init_apic_mappings(void) apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n", __fix_to_virt(idx), ioapic_phys); idx++; - - if (ioapic_res) { - ioapic_res->start = ioapic_phys; - ioapic_res->end = ioapic_phys + (4 * 1024) - 1; - insert_resource(&iomem_resource, ioapic_res); - ioapic_res++; - } } } } diff --git a/block/ioctl.c b/block/ioctl.c index 309760b7e37..58aab630dfc 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -199,8 +199,8 @@ static int blkdev_locked_ioctl(struct file *file, struct block_device *bdev, return -ENOIOCTLCMD; } -static int blkdev_driver_ioctl(struct inode *inode, struct file *file, - struct gendisk *disk, unsigned cmd, unsigned long arg) +int blkdev_driver_ioctl(struct inode *inode, struct file *file, + struct gendisk *disk, unsigned cmd, unsigned long arg) { int ret; if (disk->fops->unlocked_ioctl) @@ -215,6 +215,7 @@ static int blkdev_driver_ioctl(struct inode *inode, struct file *file, return -ENOTTY; } +EXPORT_SYMBOL_GPL(blkdev_driver_ioctl); int blkdev_ioctl(struct inode *inode, struct file *file, unsigned cmd, unsigned long arg) diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index cf656ecbe50..8c757438f35 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -429,7 +429,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ - switch(reg1 & 0x700) { + switch((reg1 & 0x700) >> 8) { case 5: info_hpt366.private_data = &hpt366_40; break; diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 5d8925bd904..cbb9d0f21ac 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -552,7 +552,8 @@ static void process_page(unsigned long data) static int mm_make_request(request_queue_t *q, struct bio *bio) { struct cardinfo *card = q->queuedata; - pr_debug("mm_make_request %ld %d\n", bh->b_rsector, bh->b_size); + pr_debug("mm_make_request %llu %u\n", + (unsigned long long)bio->bi_sector, bio->bi_size); bio->bi_phys_segments = bio->bi_idx; /* count of completed segments*/ spin_lock_irq(&card->lock); diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index 4747729459c..8b6f197e5f8 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -153,9 +153,7 @@ static int put_chars(uint32_t vtermno, const char *buf, int count) spin_lock_irqsave(&consolelock, flags); if (viochar_is_console(pi) && !viopath_isactive(pi->lp)) { - spin_lock_irqsave(&consoleloglock, flags); HvCall_writeLogBuffer(buf, count); - spin_unlock_irqrestore(&consoleloglock, flags); sent = count; goto done; } @@ -171,11 +169,8 @@ static int put_chars(uint32_t vtermno, const char *buf, int count) len = (count > VIOCHAR_MAX_DATA) ? VIOCHAR_MAX_DATA : count; - if (viochar_is_console(pi)) { - spin_lock_irqsave(&consoleloglock, flags); + if (viochar_is_console(pi)) HvCall_writeLogBuffer(buf, len); - spin_unlock_irqrestore(&consoleloglock, flags); - } init_data_event(viochar, pi->lp); diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 4828bc914ce..62ef511d143 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -779,8 +779,6 @@ retry: ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 ); goto out; -out_class: - class_destroy(ip2_class); out_chrdev: unregister_chrdev(IP2_IPL_MAJOR, "ip2"); out: diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 908521e36d8..b106c45abfc 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -217,6 +217,11 @@ struct smi_info struct list_head link; }; +#define SI_MAX_PARMS 4 + +static int force_kipmid[SI_MAX_PARMS]; +static int num_force_kipmid; + static int try_smi_init(struct smi_info *smi); static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list); @@ -908,6 +913,7 @@ static int smi_start_processing(void *send_info, ipmi_smi_t intf) { struct smi_info *new_smi = send_info; + int enable = 0; new_smi->intf = intf; @@ -917,10 +923,18 @@ static int smi_start_processing(void *send_info, mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES); /* + * Check if the user forcefully enabled the daemon. + */ + if (new_smi->intf_num < num_force_kipmid) + enable = force_kipmid[new_smi->intf_num]; + /* * The BT interface is efficient enough to not need a thread, * and there is no need for a thread if we have interrupts. */ - if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) { + else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) + enable = 1; + + if (enable) { new_smi->thread = kthread_run(ipmi_thread, new_smi, "kipmi%d", new_smi->intf_num); if (IS_ERR(new_smi->thread)) { @@ -948,7 +962,6 @@ static struct ipmi_smi_handlers handlers = /* There can be 4 IO ports passed in (with or without IRQs), 4 addresses, a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */ -#define SI_MAX_PARMS 4 static LIST_HEAD(smi_infos); static DEFINE_MUTEX(smi_infos_lock); static int smi_num; /* Used to sequence the SMIs */ @@ -1021,6 +1034,10 @@ MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" " the controller. Normally this is 0x20, but can be" " overridden by this parm. This is an array indexed" " by interface number."); +module_param_array(force_kipmid, int, &num_force_kipmid, 0); +MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or" + " disabled(0). Normally the IPMI driver auto-detects" + " this, but the value may be overridden by this parm."); #define IPMI_IO_ADDR_SPACE 0 @@ -1734,6 +1751,7 @@ static void __devinit dmi_find_bmc(void) int rv; while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) { + memset(&data, 0, sizeof(data)); rv = decode_dmi((struct dmi_header *) dev->device_data, &data); if (!rv) try_init_dmi(&data); diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c index d30dc09dbbc..9df0ca1be0e 100644 --- a/drivers/char/tipar.c +++ b/drivers/char/tipar.c @@ -224,14 +224,16 @@ probe_ti_parallel(int minor) { int i; int seq[] = { 0x00, 0x20, 0x10, 0x30 }; + int data; for (i = 3; i >= 0; i--) { outbyte(3, minor); outbyte(i, minor); udelay(delay); + data = inbyte(minor) & 0x30; pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i, - data & 0x30, seq[i]); - if ((inbyte(minor) & 0x30) != seq[i]) { + data, seq[i]); + if (data != seq[i]) { outbyte(3, minor); return -1; } diff --git a/drivers/char/vt.c b/drivers/char/vt.c index ec0c070bf15..8e4413f6fba 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -106,7 +106,8 @@ #define MAX_NR_CON_DRIVER 16 #define CON_DRIVER_FLAG_MODULE 1 -#define CON_DRIVER_FLAG_INIT 2 +#define CON_DRIVER_FLAG_INIT 2 +#define CON_DRIVER_FLAG_ATTR 4 struct con_driver { const struct consw *con; @@ -138,14 +139,6 @@ const struct consw *conswitchp; extern void vcs_make_sysfs(struct tty_struct *tty); extern void vcs_remove_sysfs(struct tty_struct *tty); -extern void console_map_init(void); -#ifdef CONFIG_PROM_CONSOLE -extern void prom_con_init(void); -#endif -#ifdef CONFIG_MDA_CONSOLE -extern int mda_console_init(void); -#endif - struct vc vc_cons [MAX_NR_CONSOLES]; #ifndef VT_SINGLE_DRIVER @@ -3070,22 +3063,37 @@ static struct class_device_attribute class_device_attrs[] = { static int vtconsole_init_class_device(struct con_driver *con) { int i; + int error = 0; + con->flag |= CON_DRIVER_FLAG_ATTR; class_set_devdata(con->class_dev, con); - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_create_file(con->class_dev, + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { + error = class_device_create_file(con->class_dev, + &class_device_attrs[i]); + if (error) + break; + } + + if (error) { + while (--i >= 0) + class_device_remove_file(con->class_dev, &class_device_attrs[i]); + con->flag &= ~CON_DRIVER_FLAG_ATTR; + } - return 0; + return error; } static void vtconsole_deinit_class_device(struct con_driver *con) { int i; - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_remove_file(con->class_dev, - &class_device_attrs[i]); + if (con->flag & CON_DRIVER_FLAG_ATTR) { + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) + class_device_remove_file(con->class_dev, + &class_device_attrs[i]); + con->flag &= ~CON_DRIVER_FLAG_ATTR; + } } /** @@ -3184,6 +3192,7 @@ int register_con_driver(const struct consw *csw, int first, int last) } else { vtconsole_init_class_device(con_driver); } + err: release_console_sem(); module_put(owner); diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c index 23b08668545..fc17599c905 100644 --- a/drivers/firmware/dell_rbu.c +++ b/drivers/firmware/dell_rbu.c @@ -227,7 +227,7 @@ static int packetize_data(void *data, size_t length) int packet_length; u8 *temp; u8 *end = (u8 *) data + length; - pr_debug("packetize_data: data length %d\n", length); + pr_debug("packetize_data: data length %zd\n", length); if (!rbu_data.packetsize) { printk(KERN_WARNING "dell_rbu: packetsize not specified\n"); @@ -249,7 +249,7 @@ static int packetize_data(void *data, size_t length) if ((rc = create_packet(temp, packet_length))) return rc; - pr_debug("%lu:%lu\n", temp, (end - temp)); + pr_debug("%p:%lu\n", temp, (end - temp)); temp += packet_length; } diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 69d627bd537..abcabb29559 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -56,7 +56,7 @@ if IDE config IDE_MAX_HWIFS int "Max IDE interfaces" - depends on ALPHA || SUPERH || IA64 + depends on ALPHA || SUPERH || IA64 || EMBEDDED default 4 help This is the maximum number of IDE hardware interfaces that will @@ -594,6 +594,12 @@ config BLK_DEV_HPT366 ide-probe at boot. It is reported to support DVD II drives, by the manufacturer. +config BLK_DEV_JMICRON + tristate "JMicron JMB36x support" + help + Basic support for the JMicron ATA controllers. For full support + use the libata drivers. + config BLK_DEV_SC1200 tristate "National SCx200 chipset support" help diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index c3546fe9af6..56efed6742d 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -145,14 +145,12 @@ int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *driv { for ( ; drive_table->id_model ; drive_table++) if ((!strcmp(drive_table->id_model, id->model)) && - ((strstr(drive_table->id_firmware, id->fw_rev)) || + ((strstr(id->fw_rev, drive_table->id_firmware)) || (!strcmp(drive_table->id_firmware, "ALL")))) return 1; return 0; } -EXPORT_SYMBOL_GPL(ide_in_drive_list); - /** * ide_dma_intr - IDE DMA interrupt handler * @drive: the drive the interrupt is for @@ -798,26 +796,23 @@ static int ide_release_dma_engine(ide_hwif_t *hwif) static int ide_release_iomio_dma(ide_hwif_t *hwif) { - if ((hwif->dma_extra) && (hwif->channel == 0)) - release_region((hwif->dma_base + 16), hwif->dma_extra); release_region(hwif->dma_base, 8); - if (hwif->dma_base2) - release_region(hwif->dma_base, 8); + if (hwif->extra_ports) + release_region(hwif->extra_base, hwif->extra_ports); return 1; } /* * Needed for allowing full modular support of ide-driver */ -int ide_release_dma (ide_hwif_t *hwif) +int ide_release_dma(ide_hwif_t *hwif) { + ide_release_dma_engine(hwif); + if (hwif->mmio == 2) return 1; - if (hwif->chipset == ide_etrax100) - return 1; - - ide_release_dma_engine(hwif); - return ide_release_iomio_dma(hwif); + else + return ide_release_iomio_dma(hwif); } static int ide_allocate_dma_engine(ide_hwif_t *hwif) @@ -829,10 +824,9 @@ static int ide_allocate_dma_engine(ide_hwif_t *hwif) if (hwif->dmatable_cpu) return 0; - printk(KERN_ERR "%s: -- Error, unable to allocate%s DMA table(s).\n", - hwif->cds->name, !hwif->dmatable_cpu ? " CPU" : ""); + printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n", + hwif->cds->name); - ide_release_dma_engine(hwif); return 1; } @@ -840,9 +834,7 @@ static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base, unsigned in { printk(KERN_INFO " %s: MMIO-DMA ", hwif->name); - hwif->dma_base = base; - if (hwif->cds->extra && hwif->channel == 0) - hwif->dma_extra = hwif->cds->extra; + hwif->dma_base = base; if(hwif->mate) hwif->dma_master = (hwif->channel) ? hwif->mate->dma_base : base; @@ -854,29 +846,33 @@ static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base, unsigned in static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int ports) { printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx", - hwif->name, base, base + ports - 1); + hwif->name, base, base + ports - 1); + if (!request_region(base, ports, hwif->name)) { printk(" -- Error, ports in use.\n"); return 1; } + hwif->dma_base = base; - if ((hwif->cds->extra) && (hwif->channel == 0)) { - request_region(base+16, hwif->cds->extra, hwif->cds->name); - hwif->dma_extra = hwif->cds->extra; + + if (hwif->cds->extra) { + hwif->extra_base = base + (hwif->channel ? 8 : 16); + + if (!hwif->mate || !hwif->mate->extra_ports) { + if (!request_region(hwif->extra_base, + hwif->cds->extra, hwif->cds->name)) { + printk(" -- Error, extra ports in use.\n"); + release_region(base, ports); + return 1; + } + hwif->extra_ports = hwif->cds->extra; + } } - + if(hwif->mate) - hwif->dma_master = (hwif->channel) ? hwif->mate->dma_base : base; + hwif->dma_master = (hwif->channel) ? hwif->mate->dma_base:base; else hwif->dma_master = base; - if (hwif->dma_base2) { - if (!request_region(hwif->dma_base2, ports, hwif->name)) - { - printk(" -- Error, secondary ports in use.\n"); - release_region(base, ports); - return 1; - } - } return 0; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 38479a29d3e..ba6039b55b4 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -59,8 +59,6 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq, { int ret = 1; - BUG_ON(!blk_rq_started(rq)); - /* * if failfast is set on a request, override number of sectors and * complete the whole request right now @@ -82,7 +80,8 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq, if (!end_that_request_first(rq, uptodate, nr_sectors)) { add_disk_randomness(rq->rq_disk); - blkdev_dequeue_request(rq); + if (!list_empty(&rq->queuelist)) + blkdev_dequeue_request(rq); HWGROUP(drive)->rq = NULL; end_that_request_last(rq, uptodate); ret = 0; @@ -135,7 +134,8 @@ enum { ide_pm_flush_cache = ide_pm_state_start_suspend, idedisk_pm_standby, - idedisk_pm_idle = ide_pm_state_start_resume, + idedisk_pm_restore_pio = ide_pm_state_start_resume, + idedisk_pm_idle, ide_pm_restore_dma, }; @@ -156,7 +156,10 @@ static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 s case idedisk_pm_standby: /* Suspend step 2 (standby) complete */ pm->pm_step = ide_pm_state_completed; break; - case idedisk_pm_idle: /* Resume step 1 (idle) complete */ + case idedisk_pm_restore_pio: /* Resume step 1 complete */ + pm->pm_step = idedisk_pm_idle; + break; + case idedisk_pm_idle: /* Resume step 2 (idle) complete */ pm->pm_step = ide_pm_restore_dma; break; } @@ -170,8 +173,11 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * memset(args, 0, sizeof(*args)); if (drive->media != ide_disk) { - /* skip idedisk_pm_idle for ATAPI devices */ - if (pm->pm_step == idedisk_pm_idle) + /* + * skip idedisk_pm_restore_pio and idedisk_pm_idle for ATAPI + * devices + */ + if (pm->pm_step == idedisk_pm_restore_pio) pm->pm_step = ide_pm_restore_dma; } @@ -198,13 +204,19 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * args->handler = &task_no_data_intr; return do_rw_taskfile(drive, args); - case idedisk_pm_idle: /* Resume step 1 (idle) */ + case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */ + if (drive->hwif->tuneproc != NULL) + drive->hwif->tuneproc(drive, 255); + ide_complete_power_step(drive, rq, 0, 0); + return ide_stopped; + + case idedisk_pm_idle: /* Resume step 2 (idle) */ args->tfRegister[IDE_COMMAND_OFFSET] = WIN_IDLEIMMEDIATE; args->command_type = IDE_DRIVE_TASK_NO_DATA; args->handler = task_no_data_intr; return do_rw_taskfile(drive, args); - case ide_pm_restore_dma: /* Resume step 2 (restore DMA) */ + case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */ /* * Right now, all we do is call hwif->ide_dma_check(drive), * we could be smarter and check for current xfer_speed @@ -1346,6 +1358,10 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) * make sure request is sane */ rq = HWGROUP(drive)->rq; + + if (!rq) + goto out; + HWGROUP(drive)->rq = NULL; rq->errors = 0; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 77703acaec1..badde633177 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -998,6 +998,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) } /* done polling */ hwgroup->polling = 0; + hwgroup->resetting = 0; return ide_stopped; } @@ -1057,6 +1058,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) } } hwgroup->polling = 0; /* done polling */ + hwgroup->resetting = 0; /* done reset attempt */ return ide_stopped; } @@ -1143,6 +1145,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) /* For an ATAPI device, first try an ATAPI SRST. */ if (drive->media != ide_disk && !do_not_try_atapi) { + hwgroup->resetting = 1; pre_reset(drive); SELECT_DRIVE(drive); udelay (20); @@ -1168,6 +1171,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) return ide_stopped; } + hwgroup->resetting = 1; /* * Note that we also set nIEN while resetting the device, * to mask unwanted interrupts from the interface during the reset. diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 850ef63cc98..8237d89eec6 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -71,75 +71,96 @@ EXPORT_SYMBOL(ide_xfer_verbose); /** * ide_dma_speed - compute DMA speed * @drive: drive - * @mode; intended mode + * @mode: modes available * * Checks the drive capabilities and returns the speed to use - * for the transfer. Returns -1 if the requested mode is unknown - * (eg PIO) + * for the DMA transfer. Returns 0 if the drive is incapable + * of DMA transfers. */ u8 ide_dma_speed(ide_drive_t *drive, u8 mode) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = HWIF(drive); + u8 ultra_mask, mwdma_mask, swdma_mask; u8 speed = 0; if (drive->media != ide_disk && hwif->atapi_dma == 0) return 0; - switch(mode) { - case 0x04: - if ((id->dma_ultra & 0x0040) && - (id->dma_ultra & hwif->ultra_mask)) - { speed = XFER_UDMA_6; break; } - case 0x03: - if ((id->dma_ultra & 0x0020) && - (id->dma_ultra & hwif->ultra_mask)) - { speed = XFER_UDMA_5; break; } - case 0x02: - if ((id->dma_ultra & 0x0010) && - (id->dma_ultra & hwif->ultra_mask)) - { speed = XFER_UDMA_4; break; } - if ((id->dma_ultra & 0x0008) && - (id->dma_ultra & hwif->ultra_mask)) - { speed = XFER_UDMA_3; break; } - case 0x01: - if ((id->dma_ultra & 0x0004) && - (id->dma_ultra & hwif->ultra_mask)) - { speed = XFER_UDMA_2; break; } - if ((id->dma_ultra & 0x0002) && - (id->dma_ultra & hwif->ultra_mask)) - { speed = XFER_UDMA_1; break; } - if ((id->dma_ultra & 0x0001) && - (id->dma_ultra & hwif->ultra_mask)) - { speed = XFER_UDMA_0; break; } - case 0x00: - if ((id->dma_mword & 0x0004) && - (id->dma_mword & hwif->mwdma_mask)) - { speed = XFER_MW_DMA_2; break; } - if ((id->dma_mword & 0x0002) && - (id->dma_mword & hwif->mwdma_mask)) - { speed = XFER_MW_DMA_1; break; } - if ((id->dma_mword & 0x0001) && - (id->dma_mword & hwif->mwdma_mask)) - { speed = XFER_MW_DMA_0; break; } - if ((id->dma_1word & 0x0004) && - (id->dma_1word & hwif->swdma_mask)) - { speed = XFER_SW_DMA_2; break; } - if ((id->dma_1word & 0x0002) && - (id->dma_1word & hwif->swdma_mask)) - { speed = XFER_SW_DMA_1; break; } - if ((id->dma_1word & 0x0001) && - (id->dma_1word & hwif->swdma_mask)) - { speed = XFER_SW_DMA_0; break; } - } + /* Capable of UltraDMA modes? */ + ultra_mask = id->dma_ultra & hwif->ultra_mask; + + if (!(id->field_valid & 4)) + mode = 0; /* fallback to MW/SW DMA if no UltraDMA */ + + switch (mode) { + case 4: + if (ultra_mask & 0x40) { + speed = XFER_UDMA_6; + break; + } + case 3: + if (ultra_mask & 0x20) { + speed = XFER_UDMA_5; + break; + } + case 2: + if (ultra_mask & 0x10) { + speed = XFER_UDMA_4; + break; + } + if (ultra_mask & 0x08) { + speed = XFER_UDMA_3; + break; + } + case 1: + if (ultra_mask & 0x04) { + speed = XFER_UDMA_2; + break; + } + if (ultra_mask & 0x02) { + speed = XFER_UDMA_1; + break; + } + if (ultra_mask & 0x01) { + speed = XFER_UDMA_0; + break; + } + case 0: + mwdma_mask = id->dma_mword & hwif->mwdma_mask; -// printk("%s: %s: mode 0x%02x, speed 0x%02x\n", -// __FUNCTION__, drive->name, mode, speed); + if (mwdma_mask & 0x04) { + speed = XFER_MW_DMA_2; + break; + } + if (mwdma_mask & 0x02) { + speed = XFER_MW_DMA_1; + break; + } + if (mwdma_mask & 0x01) { + speed = XFER_MW_DMA_0; + break; + } + + swdma_mask = id->dma_1word & hwif->swdma_mask; + + if (swdma_mask & 0x04) { + speed = XFER_SW_DMA_2; + break; + } + if (swdma_mask & 0x02) { + speed = XFER_SW_DMA_1; + break; + } + if (swdma_mask & 0x01) { + speed = XFER_SW_DMA_0; + break; + } + } return speed; } - EXPORT_SYMBOL(ide_dma_speed); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 9cadf0106c6..dad9c47ebb6 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -623,6 +623,8 @@ static void hwif_release_dev (struct device *dev) static void hwif_register (ide_hwif_t *hwif) { + int ret; + /* register with global device tree */ strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE); hwif->gendev.driver_data = hwif; @@ -634,7 +636,10 @@ static void hwif_register (ide_hwif_t *hwif) hwif->gendev.parent = NULL; } hwif->gendev.release = hwif_release_dev; - device_register(&hwif->gendev); + ret = device_register(&hwif->gendev); + if (ret < 0) + printk(KERN_WARNING "IDE: %s: device_register error: %d\n", + __FUNCTION__, ret); } static int wait_hwif_ready(ide_hwif_t *hwif) @@ -884,13 +889,19 @@ int probe_hwif_init_with_fixup(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif) if (hwif->present) { u16 unit = 0; + int ret; + for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; /* For now don't attach absent drives, we may want them on default or a new "empty" class for hotplug reprobing ? */ if (drive->present) { - device_register(&drive->gendev); + ret = device_register(&drive->gendev); + if (ret < 0) + printk(KERN_WARNING "IDE: %s: " + "device_register error: %d\n", + __FUNCTION__, ret); } } } @@ -1409,8 +1420,14 @@ int ideprobe_init (void) if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) hwif->chipset = ide_generic; for (unit = 0; unit < MAX_DRIVES; ++unit) - if (hwif->drives[unit].present) - device_register(&hwif->drives[unit].gendev); + if (hwif->drives[unit].present) { + int ret = device_register( + &hwif->drives[unit].gendev); + if (ret < 0) + printk(KERN_WARNING "IDE: %s: " + "device_register error: %d\n", + __FUNCTION__, ret); + } } } return 0; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 41b74b13a00..aa049dab3d9 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -326,15 +326,24 @@ static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) { struct device *dev = &drive->gendev; int ret = 1; + int err; down_write(&dev->bus->subsys.rwsem); device_release_driver(dev); /* FIXME: device can still be in use by previous driver */ strlcpy(drive->driver_req, driver, sizeof(drive->driver_req)); - device_attach(dev); + err = device_attach(dev); + if (err < 0) + printk(KERN_WARNING "IDE: %s: device_attach error: %d\n", + __FUNCTION__, err); drive->driver_req[0] = 0; - if (dev->driver == NULL) - device_attach(dev); + if (dev->driver == NULL) { + err = device_attach(dev); + if (err < 0) + printk(KERN_WARNING + "IDE: %s: device_attach(2) error: %d\n", + __FUNCTION__, err); + } if (dev->driver && !strcmp(dev->driver->name, driver)) ret = 0; up_write(&dev->bus->subsys.rwsem); @@ -526,7 +535,12 @@ static int proc_print_driver(struct device_driver *drv, void *data) static int ide_drivers_show(struct seq_file *s, void *p) { - bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); + int err; + + err = bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); + if (err < 0) + printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n", + __FUNCTION__, err); return 0; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 2b1a1389c31..287a6620115 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -450,7 +450,7 @@ void ide_hwif_release_regions(ide_hwif_t *hwif) * @hwif: hwif to update * @tmp_hwif: template * - * Restore hwif to a previous state by copying most settngs + * Restore hwif to a previous state by copying most settings * from the template. */ @@ -539,9 +539,10 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->dma_vendor3 = tmp_hwif->dma_vendor3; hwif->dma_prdtable = tmp_hwif->dma_prdtable; - hwif->dma_extra = tmp_hwif->dma_extra; hwif->config_data = tmp_hwif->config_data; hwif->select_data = tmp_hwif->select_data; + hwif->extra_base = tmp_hwif->extra_base; + hwif->extra_ports = tmp_hwif->extra_ports; hwif->autodma = tmp_hwif->autodma; hwif->udma_four = tmp_hwif->udma_four; hwif->no_dsc = tmp_hwif->no_dsc; @@ -550,7 +551,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) } /** - * ide_unregister - free an ide interface + * ide_unregister - free an IDE interface * @index: index of interface (will change soon to a pointer) * * Perform the final unregister of an IDE interface. At the moment @@ -563,8 +564,8 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) * deadlocking the IDE layer. The shutdown callback is called * before we take the lock and free resources. It is up to the * caller to be sure there is no pending I/O here, and that - * the interfce will not be reopened (present/vanishing locking - * isnt yet done btw). After we commit to the final kill we + * the interface will not be reopened (present/vanishing locking + * isn't yet done BTW). After we commit to the final kill we * call the cleanup callback with the ide locks held. * * Unregister restores the hwif structures to the default state. @@ -674,6 +675,9 @@ void ide_unregister(unsigned int index) hwif->dma_status = 0; hwif->dma_vendor3 = 0; hwif->dma_prdtable = 0; + + hwif->extra_base = 0; + hwif->extra_ports = 0; } /* copy original settings */ @@ -1360,6 +1364,11 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device spin_lock_irqsave(&ide_lock, flags); + if (HWGROUP(drive)->resetting) { + spin_unlock_irqrestore(&ide_lock, flags); + return -EBUSY; + } + ide_abort(drive, "drive reset"); BUG_ON(HWGROUP(drive)->handler); @@ -1993,10 +2002,16 @@ EXPORT_SYMBOL_GPL(ide_bus_type); */ static int __init ide_init(void) { + int ret; + printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n"); system_bus_speed = ide_system_bus_speed(); - bus_register(&ide_bus_type); + ret = bus_register(&ide_bus_type); + if (ret < 0) { + printk(KERN_WARNING "IDE: bus_register error: %d\n", ret); + return ret; + } init_ide_data(); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 602797a4420..bef4759f70e 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -120,7 +120,7 @@ static int ide_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; link->io.IOAddrLines = 3; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -398,12 +398,17 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), + PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883), + PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d), + PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile index f35d684edc2..640a54b09b5 100644 --- a/drivers/ide/pci/Makefile +++ b/drivers/ide/pci/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o #obj-$(CONFIG_BLK_DEV_HPT37X) += hpt37x.o obj-$(CONFIG_BLK_DEV_IT8172) += it8172.o obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o +obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 380bb28c7c5..ae405fa3223 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -222,23 +222,23 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch unsigned long flags; dev = NULL; - while ((dev = pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { + while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { switch (dev->device) { case PCI_DEVICE_ID_CYRIX_PCI_MASTER: - master_0 = dev; + master_0 = pci_dev_get(dev); break; case PCI_DEVICE_ID_CYRIX_5530_LEGACY: - cs5530_0 = dev; + cs5530_0 = pci_dev_get(dev); break; } } if (!master_0) { printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name); - return 0; + goto out; } if (!cs5530_0) { printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name); - return 0; + goto out; } spin_lock_irqsave(&ide_lock, flags); @@ -296,6 +296,9 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch spin_unlock_irqrestore(&ide_lock, flags); +out: + pci_dev_put(master_0); + pci_dev_put(cs5530_0); return 0; } diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 120929fbe7a..64330c459bd 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -281,7 +281,7 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio) /* select primary or secondary channel */ if (hwif->index > 0) { /* drive is on the secondary channel */ - dev = pci_find_slot(dev->bus->number, dev->devfn+1); + dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " "Cannot find secondary interface!\n", @@ -500,8 +500,9 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev Function 1 is primary IDE channel, function 2 - secondary. */ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && PCI_FUNC(dev->devfn) == 1) { - dev2 = pci_find_slot(dev->bus->number, dev->devfn + 1); + dev2 = pci_get_slot(dev->bus, dev->devfn + 1); ret = ide_setup_pci_devices(dev, dev2, d); + /* We leak pci refs here but thats ok - we can't be unloaded */ } return ret; } diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 78810ba982e..0cb7b9b520e 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -41,15 +41,8 @@ static int ide_generic_all; /* Set to claim all devices */ -#ifndef MODULE -static int __init ide_generic_all_on(char *unused) -{ - ide_generic_all = 1; - printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n"); - return 1; -} -__setup("all-generic-ide", ide_generic_all_on); -#endif +module_param_named(all_generic_ide, ide_generic_all, bool, 0444); +MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); static void __devinit init_hwif_generic (ide_hwif_t *hwif) { diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c new file mode 100644 index 00000000000..68c74bbf8b0 --- /dev/null +++ b/drivers/ide/pci/jmicron.c @@ -0,0 +1,269 @@ + +/* + * Copyright (C) 2006 Red Hat <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +typedef enum { + PORT_PATA0 = 0, + PORT_PATA1 = 1, + PORT_SATA = 2, +} port_type; + +/** + * jmicron_ratemask - Compute available modes + * @drive: IDE drive + * + * Compute the available speeds for the devices on the interface. This + * is all modes to ATA133 clipped by drive cable setup. + */ + +static u8 jmicron_ratemask(ide_drive_t *drive) +{ + u8 mode = 4; + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +/** + * ata66_jmicron - Cable check + * @hwif: IDE port + * + * Return 1 if the cable is 80pin + */ + +static int __devinit ata66_jmicron(ide_hwif_t *hwif) +{ + struct pci_dev *pdev = hwif->pci_dev; + + u32 control; + u32 control5; + + int port = hwif->channel; + port_type port_map[2]; + + pci_read_config_dword(pdev, 0x40, &control); + + /* There are two basic mappings. One has the two SATA ports merged + as master/slave and the secondary as PATA, the other has only the + SATA port mapped */ + if (control & (1 << 23)) { + port_map[0] = PORT_SATA; + port_map[1] = PORT_PATA0; + } else { + port_map[0] = PORT_SATA; + port_map[1] = PORT_SATA; + } + + /* The 365/366 may have this bit set to map the second PATA port + as the internal primary channel */ + pci_read_config_dword(pdev, 0x80, &control5); + if (control5 & (1<<24)) + port_map[0] = PORT_PATA1; + + /* The two ports may then be logically swapped by the firmware */ + if (control & (1 << 22)) + port = port ^ 1; + + /* + * Now we know which physical port we are talking about we can + * actually do our cable checking etc. Thankfully we don't need + * to do the plumbing for other cases. + */ + switch (port_map[port]) + { + case PORT_PATA0: + if (control & (1 << 3)) /* 40/80 pin primary */ + return 1; + return 0; + case PORT_PATA1: + if (control5 & (1 << 19)) /* 40/80 pin secondary */ + return 0; + return 1; + case PORT_SATA: + return 1; + } +} + +static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted) +{ + return; +} + +/** + * config_jmicron_chipset_for_pio - set drive timings + * @drive: drive to tune + * @speed we want + * + */ + +static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed) +{ + u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); + if (set_speed) + (void) ide_config_drive_speed(drive, speed); +} + +/** + * jmicron_tune_chipset - set controller timings + * @drive: Drive to set up + * @xferspeed: speed we want to achieve + * + * As the JMicron snoops for timings all we actually need to do is + * make sure we don't set an invalid mode. We do need to honour + * the cable detect here. + */ + +static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed) +{ + + u8 speed = ide_rate_filter(jmicron_ratemask(drive), xferspeed); + + return ide_config_drive_speed(drive, speed); +} + +/** + * config_chipset_for_dma - configure for DMA + * @drive: drive to configure + * + * As the JMicron snoops for timings all we actually need to do is + * make sure we don't set an invalid mode. + */ + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, jmicron_ratemask(drive)); + + config_jmicron_chipset_for_pio(drive, !speed); + jmicron_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +/** + * jmicron_configure_drive_for_dma - set up for DMA transfers + * @drive: drive we are going to set up + * + * As the JMicron snoops for timings all we actually need to do is + * make sure we don't set an invalid mode. + */ + +static int jmicron_config_drive_for_dma (ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + config_jmicron_chipset_for_pio(drive, 1); + return hwif->ide_dma_off_quietly(drive); +} + +/** + * init_hwif_jmicron - set up hwif structs + * @hwif: interface to set up + * + * Minimal set up is required for the Jmicron hardware. + */ + +static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) +{ + hwif->speedproc = &jmicron_tune_chipset; + hwif->tuneproc = &jmicron_tuneproc; + + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + + if (!hwif->dma_base) + goto fallback; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + + hwif->ide_dma_check = &jmicron_config_drive_for_dma; + if (!(hwif->udma_four)) + hwif->udma_four = ata66_jmicron(hwif); + + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; + return; +fallback: + hwif->autodma = 0; + return; +} + +#define DECLARE_JMB_DEV(name_str) \ + { \ + .name = name_str, \ + .init_hwif = init_hwif_jmicron, \ + .channels = 2, \ + .autodma = AUTODMA, \ + .bootable = ON_BOARD, \ + .enablebits = { {0x40, 1, 1}, {0x40, 0x10, 0x10} }, \ + } + +static ide_pci_device_t jmicron_chipsets[] __devinitdata = { + /* 0 */ DECLARE_JMB_DEV("JMB361"), + /* 1 */ DECLARE_JMB_DEV("JMB363"), + /* 2 */ DECLARE_JMB_DEV("JMB365"), + /* 3 */ DECLARE_JMB_DEV("JMB366"), + /* 4 */ DECLARE_JMB_DEV("JMB368"), +}; + +/** + * jmicron_init_one - pci layer discovery entry + * @dev: PCI device + * @id: ident table entry + * + * Called by the PCI code when it finds a Jmicron controller. + * We then use the IDE PCI generic helper to do most of the work. + */ + +static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_setup_pci_device(dev, &jmicron_chipsets[id->driver_data]); + return 0; +} + +static struct pci_device_id jmicron_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 0}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 1}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365), 2}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366), 3}, + { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368), 4}, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl); + +static struct pci_driver driver = { + .name = "JMicron IDE", + .id_table = jmicron_pci_tbl, + .probe = jmicron_init_one, +}; + +static int __init jmicron_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(jmicron_ide_init); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for the JMicron in legacy modes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index b46022a11be..184cdacddeb 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -154,7 +154,8 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) u8 AP, BP, CP, DP; u8 TA = 0, TB = 0, TC = 0; - if ((drive->media != ide_disk) && (speed < XFER_SW_DMA_0)) + if (drive->media != ide_disk && + drive->media != ide_cdrom && speed < XFER_SW_DMA_0) return -1; pci_read_config_dword(dev, drive_pci, &drive_conf); @@ -330,14 +331,12 @@ static int config_chipset_for_dma (ide_drive_t *drive) chipset_is_set: - if (drive->media == ide_disk) { - pci_read_config_byte(dev, (drive_pci), &AP); - if (id->capability & 4) /* IORDY_EN */ - pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN); - pci_read_config_byte(dev, (drive_pci), &AP); - if (drive->media == ide_disk) /* PREFETCH_EN */ - pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); - } + pci_read_config_byte(dev, (drive_pci), &AP); + if (id->capability & 4) /* IORDY_EN */ + pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN); + pci_read_config_byte(dev, (drive_pci), &AP); + if (drive->media == ide_disk) /* PREFETCH_EN */ + pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); speed = ide_dma_speed(drive, pdc202xx_ratemask(drive)); @@ -385,7 +384,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) { if (drive->current_speed > XFER_UDMA_2) pdc_old_enable_66MHz_clock(drive->hwif); - if (drive->addressing == 1) { + if (drive->media != ide_disk || drive->addressing == 1) { struct request *rq = HWGROUP(drive)->rq; ide_hwif_t *hwif = HWIF(drive); unsigned long high_16 = hwif->dma_master; @@ -405,7 +404,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) { - if (drive->addressing == 1) { + if (drive->media != ide_disk || drive->addressing == 1) { ide_hwif_t *hwif = HWIF(drive); unsigned long high_16 = hwif->dma_master; unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); @@ -519,6 +518,7 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->ultra_mask = 0x3f; hwif->mwdma_mask = 0x07; hwif->swdma_mask = 0x07; + hwif->atapi_dma = 1; hwif->err_stops_fifo = 1; diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index eb5bab1890c..cdc3aab9ebc 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -222,13 +222,15 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) u16 master_data; u8 slave_data; static DEFINE_SPINLOCK(tune_lock); + int control = 0; /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; + static const u8 timings[][2]= { + { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; pio = ide_get_best_pio_mode(drive, pio, 5, NULL); @@ -239,19 +241,30 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) */ spin_lock_irqsave(&tune_lock, flags); pci_read_config_word(dev, master_port, &master_data); + + if (pio >= 2) + control |= 1; /* Programmable timing on */ + if (drive->media == ide_disk) + control |= 4; /* Prefetch, post write */ + if (pio >= 3) + control |= 2; /* IORDY */ if (is_slave) { master_data = master_data | 0x4000; - if (pio > 1) + if (pio > 1) { /* enable PPE, IE and TIME */ - master_data = master_data | 0x0070; + master_data = master_data | (control << 4); + } else { + master_data &= ~0x0070; + } pci_read_config_byte(dev, slave_port, &slave_data); slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0); slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0)); } else { master_data = master_data & 0xccf8; - if (pio > 1) + if (pio > 1) { /* enable PPE, IE and TIME */ - master_data = master_data | 0x0007; + master_data = master_data | control; + } master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index fc2b5496b6d..ff80937d94d 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -323,6 +323,7 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au } } +#ifdef CONFIG_PM static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev) { int h; @@ -451,6 +452,7 @@ static int sc1200_resume (struct pci_dev *dev) } return 0; } +#endif /* * This gets invoked by the IDE driver once for each channel, @@ -499,8 +501,10 @@ static struct pci_driver driver = { .name = "SC1200_IDE", .id_table = sc1200_pci_tbl, .probe = sc1200_init_one, +#ifdef CONFIG_PM .suspend = sc1200_suspend, .resume = sc1200_resume, +#endif }; static int sc1200_ide_init(void) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index d8a0d87df73..f3fe287fbd8 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -220,7 +220,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) ide_hwif_t *hwif = HWIF(drive); u64 dma_base = hwif->dma_base; int dma_stat = 0; - unsigned long *ending_dma = (unsigned long *) hwif->dma_base2; + unsigned long *ending_dma = ide_get_hwifdata(hwif); hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4); @@ -369,6 +369,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) { void __iomem *virt_dma_base; int num_ports = sizeof (ioc4_dma_regs_t); + void *pad; printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, dma_base, dma_base + num_ports - 1); @@ -400,17 +401,14 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) hwif->sg_max_nents = IOC4_PRD_ENTRIES; - hwif->dma_base2 = (unsigned long) - pci_alloc_consistent(hwif->pci_dev, - IOC4_IDE_CACHELINE_SIZE, - (dma_addr_t *) &(hwif->dma_status)); + pad = pci_alloc_consistent(hwif->pci_dev, IOC4_IDE_CACHELINE_SIZE, + (dma_addr_t *) &(hwif->dma_status)); - if (!hwif->dma_base2) - goto dma_base2alloc_failure; - - return; + if (pad) { + ide_set_hwifdata(hwif, pad); + return; + } -dma_base2alloc_failure: pci_free_consistent(hwif->pci_dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, hwif->dmatable_cpu, hwif->dmatable_dma); @@ -476,7 +474,7 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) hwif->OUTL(dma_addr, dma_base + IOC4_DMA_PTR_L * 4); /* Address of the Ending DMA */ - memset((unsigned int *) hwif->dma_base2, 0, IOC4_IDE_CACHELINE_SIZE); + memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); ending_dma_addr = cpu_to_le32(hwif->dma_status); hwif->OUTL(ending_dma_addr, dma_base + IOC4_DMA_END_ADDR * 4); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 20b392948f3..697f566fb90 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -898,7 +898,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) base = (unsigned long) addr; hwif->dma_base = base + (ch ? 0x08 : 0x00); - hwif->dma_base2 = base + (ch ? 0x18 : 0x10); hwif->mmio = 2; } diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 9b7589e8e93..2af634d7acf 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -248,7 +248,7 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa) u8 t; for (via_config = via_isa_bridges; via_config->id; via_config++) - if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA + + if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(via_config->flags & VIA_BAD_ID), via_config->id, NULL))) { @@ -256,6 +256,7 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa) if (t >= via_config->rev_min && t <= via_config->rev_max) break; + pci_dev_put(*isa); } return via_config; @@ -283,6 +284,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const via_config = via_config_find(&isa); if (!via_config->id) { printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); + pci_dev_put(isa); return -ENODEV; } @@ -361,6 +363,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const via_dma[via_config->flags & VIA_UDMA], pci_name(dev)); + pci_dev_put(isa); return 0; } diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index eb0945284ac..0719b648482 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -101,7 +101,7 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char return hwif; /* pick an unused entry */ } } - for (h = 0; h < 2; ++h) { + for (h = 0; h < 2 && h < MAX_HWIFS; ++h) { hwif = ide_hwifs + h; if (hwif->chipset == ide_unknown) return hwif; /* pick an unused entry */ @@ -795,24 +795,6 @@ int __ide_pci_register_driver(struct pci_driver *driver, struct module *module) EXPORT_SYMBOL_GPL(__ide_pci_register_driver); /** - * ide_unregister_pci_driver - unregister an IDE driver - * @driver: driver to remove - * - * Unregister a currently installed IDE driver. Returns are the same - * as for pci_unregister_driver - */ - -void ide_pci_unregister_driver(struct pci_driver *driver) -{ - if(!pre_init) - pci_unregister_driver(driver); - else - list_del(&driver->node); -} - -EXPORT_SYMBOL_GPL(ide_pci_unregister_driver); - -/** * ide_scan_pcidev - find an IDE driver for a device * @dev: PCI device to check * diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index e10350360f2..e4823ab2b12 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -1721,11 +1721,11 @@ static void hisax_b_l1l2(struct hisax_if *ifc, int pr, void *arg) hisax_b_sched_event(bcs, B_RCVBUFREADY); break; case PH_DATA | CONFIRM: - bcs->tx_cnt -= (int) arg; + bcs->tx_cnt -= (long)arg; if (test_bit(FLG_LLI_L1WAKEUP,&bcs->st->lli.flag)) { u_long flags; spin_lock_irqsave(&bcs->aclock, flags); - bcs->ackcnt += (int) arg; + bcs->ackcnt += (long)arg; spin_unlock_irqrestore(&bcs->aclock, flags); schedule_event(bcs, B_ACKPENDING); } @@ -1789,7 +1789,7 @@ static void hisax_b_l2l1(struct PStack *st, int pr, void *arg) switch (pr) { case PH_ACTIVATE | REQUEST: - B_L2L1(b_if, pr, (void *) st->l1.mode); + B_L2L1(b_if, pr, (void *)(unsigned long)st->l1.mode); break; case PH_DATA | REQUEST: case PH_PULL | INDICATION: diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c index 3a5ca8a68fc..0ca5e66d2f5 100644 --- a/drivers/isdn/hisax/hfc4s8s_l1.c +++ b/drivers/isdn/hisax/hfc4s8s_l1.c @@ -424,7 +424,7 @@ bch_l2l1(struct hisax_if *ifc, int pr, void *arg) struct hfc4s8s_btype *bch = ifc->priv; struct hfc4s8s_l1 *l1 = bch->l1p; struct sk_buff *skb = (struct sk_buff *) arg; - int mode = (int) arg; + long mode = (long) arg; u_long flags; switch (pr) { @@ -914,7 +914,7 @@ tx_d_frame(struct hfc4s8s_l1 *l1p) struct sk_buff *skb; u_char f1, f2; u_char *cp; - int cnt; + long cnt; if (l1p->l1_state != 7) return; @@ -980,7 +980,8 @@ tx_b_frame(struct hfc4s8s_btype *bch) struct sk_buff *skb; struct hfc4s8s_l1 *l1 = bch->l1p; u_char *cp; - int cnt, max, hdlc_num, ack_len = 0; + int cnt, max, hdlc_num; + long ack_len = 0; if (!l1->enabled || (bch->mode == L1_MODE_NULL)) return; diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c index f27c1608a3a..b7e8e23be33 100644 --- a/drivers/isdn/hisax/hfc_sx.c +++ b/drivers/isdn/hisax/hfc_sx.c @@ -970,7 +970,7 @@ HFCSX_l1hw(struct PStack *st, int pr, void *arg) break; case (HW_TESTLOOP | REQUEST): spin_lock_irqsave(&cs->lock, flags); - switch ((int) arg) { + switch ((long) arg) { case (1): Write_hfc(cs, HFCSX_B1_SSL, 0x80); /* tx slot */ Write_hfc(cs, HFCSX_B1_RSL, 0x80); /* rx slot */ @@ -986,7 +986,7 @@ HFCSX_l1hw(struct PStack *st, int pr, void *arg) default: spin_unlock_irqrestore(&cs->lock, flags); if (cs->debug & L1_DEB_WARN) - debugl1(cs, "hfcsx_l1hw loop invalid %4x", (int) arg); + debugl1(cs, "hfcsx_l1hw loop invalid %4lx", arg); return; } cs->hw.hfcsx.trm |= 0x80; /* enable IOM-loop */ diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index b5e571a5269..6b88ecb5047 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -696,7 +696,7 @@ tx_iso_complete(struct urb *urb, struct pt_regs *regs) fifo->delete_flg = TRUE; fifo->hif->l1l2(fifo->hif, PH_DATA | CONFIRM, - (void *) fifo->skbuff-> + (void *) (unsigned long) fifo->skbuff-> truesize); if (fifo->skbuff && fifo->delete_flg) { dev_kfree_skb_any(fifo->skbuff); @@ -1144,7 +1144,7 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) set_hfcmode(hfc, (fifo->fifonum == HFCUSB_B1_TX) ? 0 : 1, - (int) arg); + (long) arg); fifo->hif->l1l2(fifo->hif, PH_ACTIVATE | INDICATION, NULL); diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c index 1d7cf3bd6aa..881a4165cfb 100644 --- a/drivers/isdn/hisax/hisax_fcpcipnp.c +++ b/drivers/isdn/hisax/hisax_fcpcipnp.c @@ -546,7 +546,7 @@ static inline void hdlc_xpr_irq(struct fritz_bcs *bcs) } bcs->tx_cnt = 0; bcs->tx_skb = NULL; - B_L1L2(bcs, PH_DATA | CONFIRM, (void *) skb->truesize); + B_L1L2(bcs, PH_DATA | CONFIRM, (void *)(unsigned long)skb->truesize); dev_kfree_skb_irq(skb); } @@ -635,7 +635,7 @@ static void fritz_b_l2l1(struct hisax_if *ifc, int pr, void *arg) hdlc_fill_fifo(bcs); break; case PH_ACTIVATE | REQUEST: - mode = (int) arg; + mode = (long) arg; DBG(4,"B%d,PH_ACTIVATE_REQUEST %d", bcs->channel + 1, mode); modehdlc(bcs, mode); B_L1L2(bcs, PH_ACTIVATE | INDICATION, NULL); @@ -998,18 +998,15 @@ static int __init hisax_fcpcipnp_init(void) retval = pci_register_driver(&fcpci_driver); if (retval) - goto out; + return retval; #ifdef __ISAPNP__ retval = pnp_register_driver(&fcpnp_driver); - if (retval < 0) - goto out_unregister_pci; + if (retval < 0) { + pci_unregister_driver(&fcpci_driver); + return retval; + } #endif return 0; - - out_unregister_pci: - pci_unregister_driver(&fcpci_driver); - out: - return retval; } static void __exit hisax_fcpcipnp_exit(void) diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c index 22fd5db18d4..aca2a3954b1 100644 --- a/drivers/isdn/hisax/st5481_b.c +++ b/drivers/isdn/hisax/st5481_b.c @@ -86,7 +86,7 @@ static void usb_b_out(struct st5481_bcs *bcs,int buf_nr) if (!skb->len) { // Frame sent b_out->tx_skb = NULL; - B_L1L2(bcs, PH_DATA | CONFIRM, (void *) skb->truesize); + B_L1L2(bcs, PH_DATA | CONFIRM, (void *)(unsigned long) skb->truesize); dev_kfree_skb_any(skb); /* if (!(bcs->tx_skb = skb_dequeue(&bcs->sq))) { */ @@ -350,7 +350,7 @@ void st5481_b_l2l1(struct hisax_if *ifc, int pr, void *arg) { struct st5481_bcs *bcs = ifc->priv; struct sk_buff *skb = arg; - int mode; + long mode; DBG(4, ""); @@ -360,8 +360,8 @@ void st5481_b_l2l1(struct hisax_if *ifc, int pr, void *arg) bcs->b_out.tx_skb = skb; break; case PH_ACTIVATE | REQUEST: - mode = (int) arg; - DBG(4,"B%d,PH_ACTIVATE_REQUEST %d", bcs->channel + 1, mode); + mode = (long) arg; + DBG(4,"B%d,PH_ACTIVATE_REQUEST %ld", bcs->channel + 1, mode); st5481B_mode(bcs, mode); B_L1L2(bcs, PH_ACTIVATE | INDICATION, NULL); break; diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c index 493dc94992e..98adec44059 100644 --- a/drivers/isdn/hisax/st5481_d.c +++ b/drivers/isdn/hisax/st5481_d.c @@ -374,7 +374,7 @@ static void usb_d_out_complete(struct urb *urb, struct pt_regs *regs) { struct st5481_adapter *adapter = urb->context; struct st5481_d_out *d_out = &adapter->d_out; - int buf_nr; + long buf_nr; DBG(2, ""); @@ -546,7 +546,7 @@ static void dout_reseted(struct FsmInst *fsm, int event, void *arg) static void dout_complete(struct FsmInst *fsm, int event, void *arg) { struct st5481_adapter *adapter = fsm->userdata; - int buf_nr = (int) arg; + long buf_nr = (long) arg; usb_d_out(adapter, buf_nr); } diff --git a/drivers/isdn/sc/command.c b/drivers/isdn/sc/command.c index b4b24335f71..04b8a58f03b 100644 --- a/drivers/isdn/sc/command.c +++ b/drivers/isdn/sc/command.c @@ -103,9 +103,6 @@ int command(isdn_ctrl *cmd) return -ENODEV; } - pr_debug("%s: Received %s command from Link Layer\n", - sc_adapter[card]->devicename, commands[cmd->command]); - /* * Dispatch the command */ @@ -118,7 +115,7 @@ int command(isdn_ctrl *cmd) memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long)); if (copy_from_user(&ioc, (scs_ioctl __user *)cmdptr, sizeof(scs_ioctl))) { - pr_debug("%s: Failed to verify user space 0x%x\n", + pr_debug("%s: Failed to verify user space 0x%lx\n", sc_adapter[card]->devicename, cmdptr); return -EFAULT; } @@ -195,7 +192,7 @@ static int dial(int card, unsigned long channel, setup_parm setup) strlen(Phone), (unsigned int *) Phone); - pr_debug("%s: Dialing %s on channel %d\n", + pr_debug("%s: Dialing %s on channel %lu\n", sc_adapter[card]->devicename, Phone, channel+1); return status; @@ -217,7 +214,7 @@ static int answer(int card, unsigned long channel) } indicate_status(card, ISDN_STAT_BCONN,channel,NULL); - pr_debug("%s: Answered incoming call on channel %s\n", + pr_debug("%s: Answered incoming call on channel %lu\n", sc_adapter[card]->devicename, channel+1); return 0; } @@ -240,7 +237,7 @@ static int hangup(int card, unsigned long channel) (unsigned char) channel+1, 0, NULL); - pr_debug("%s: Sent HANGUP message to channel %d\n", + pr_debug("%s: Sent HANGUP message to channel %lu\n", sc_adapter[card]->devicename, channel+1); return status; } @@ -260,9 +257,6 @@ static int setl2(int card, unsigned long arg) protocol = arg >> 8; channel = arg & 0xff; sc_adapter[card]->channel[channel].l2_proto = protocol; - pr_debug("%s: Level 2 protocol for channel %d set to %s from %d\n", - sc_adapter[card]->devicename, channel+1, - l2protos[sc_adapter[card]->channel[channel].l2_proto],protocol); /* * check that the adapter is also set to the correct protocol @@ -293,8 +287,6 @@ static int setl3(int card, unsigned long channel) } sc_adapter[card]->channel[channel].l3_proto = protocol; - pr_debug("%s: Level 3 protocol for channel %d set to %s\n", - sc_adapter[card]->devicename, channel+1, l3protos[protocol]); return 0; } @@ -311,7 +303,7 @@ static int acceptb(int card, unsigned long channel) return -ENOBUFS; } - pr_debug("%s: B-Channel connection accepted on channel %d\n", + pr_debug("%s: B-Channel connection accepted on channel %lu\n", sc_adapter[card]->devicename, channel+1); indicate_status(card, ISDN_STAT_BCONN, channel, NULL); return 0; @@ -326,7 +318,7 @@ static int clreaz(int card, unsigned long arg) strcpy(sc_adapter[card]->channel[arg].eazlist, ""); sc_adapter[card]->channel[arg].eazclear = 1; - pr_debug("%s: EAZ List cleared for channel %d\n", + pr_debug("%s: EAZ List cleared for channel %lu\n", sc_adapter[card]->devicename, arg+1); return 0; } @@ -340,7 +332,7 @@ static int seteaz(int card, unsigned long arg, char *num) strcpy(sc_adapter[card]->channel[arg].eazlist, num); sc_adapter[card]->channel[arg].eazclear = 0; - pr_debug("%s: EAZ list for channel %d set to: %s\n", + pr_debug("%s: EAZ list for channel %lu set to: %s\n", sc_adapter[card]->devicename, arg+1, sc_adapter[card]->channel[arg].eazlist); return 0; diff --git a/drivers/isdn/sc/event.c b/drivers/isdn/sc/event.c index 5b8c7c1a766..57367325ef0 100644 --- a/drivers/isdn/sc/event.c +++ b/drivers/isdn/sc/event.c @@ -45,8 +45,10 @@ int indicate_status(int card, int event,ulong Channel,char *Data) { isdn_ctrl cmd; +#ifdef DEBUG pr_debug("%s: Indicating event %s on Channel %d\n", sc_adapter[card]->devicename, events[event-256], Channel); +#endif if (Data != NULL){ pr_debug("%s: Event data: %s\n", sc_adapter[card]->devicename, Data); diff --git a/drivers/isdn/sc/interrupt.c b/drivers/isdn/sc/interrupt.c index 8631d338d69..ae6263125ac 100644 --- a/drivers/isdn/sc/interrupt.c +++ b/drivers/isdn/sc/interrupt.c @@ -91,7 +91,7 @@ irqreturn_t interrupt_handler(int interrupt, void *cardptr, struct pt_regs *regs */ if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Read)) { - pr_debug("%s: Received packet 0x%x bytes long at 0x%x\n", + pr_debug("%s: Received packet 0x%x bytes long at 0x%lx\n", sc_adapter[card]->devicename, rcvmsg.msg_data.response.msg_len, rcvmsg.msg_data.response.buff_offset); diff --git a/drivers/isdn/sc/timer.c b/drivers/isdn/sc/timer.c index aced19aac5a..f43282be0ad 100644 --- a/drivers/isdn/sc/timer.c +++ b/drivers/isdn/sc/timer.c @@ -76,7 +76,7 @@ void check_reset(unsigned long data) if (sc_adapter[card]->StartOnReset) startproc(card); } else { - pr_debug("%s: No signature yet, waiting another %d jiffies.\n", + pr_debug("%s: No signature yet, waiting another %lu jiffies.\n", sc_adapter[card]->devicename, CHECKRESET_TIME); mod_timer(&sc_adapter[card]->reset_timer, jiffies+CHECKRESET_TIME); spin_unlock_irqrestore(&sc_adapter[card]->lock, flags); diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 80b89649e67..4f04fd0956a 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -336,8 +336,10 @@ int __init find_via_pmu(void) if (gaddr != OF_BAD_ADDR) gpio_reg = ioremap(gaddr, 0x10); } - if (gpio_reg == NULL) + if (gpio_reg == NULL) { printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n"); + goto fail_gpio; + } } else pmu_kind = PMU_UNKNOWN; @@ -365,6 +367,9 @@ int __init find_via_pmu(void) return 1; fail: of_node_put(vias); + iounmap(gpio_reg); + gpio_reg = NULL; + fail_gpio: vias = NULL; return 0; } diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 6dd31a291d8..c92c1521546 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -138,16 +138,16 @@ config MD_RAID456 If unsure, say Y. config MD_RAID5_RESHAPE - bool "Support adding drives to a raid-5 array (experimental)" - depends on MD_RAID456 && EXPERIMENTAL + bool "Support adding drives to a raid-5 array" + depends on MD_RAID456 + default y ---help--- A RAID-5 set can be expanded by adding extra drives. This requires "restriping" the array which means (almost) every block must be written to a different place. This option allows such restriping to be done while the array - is online. However it is still EXPERIMENTAL code. It should - work, but please be sure that you have backups. + is online. You will need mdadm version 2.4.1 or later to use this feature safely. During the early stage of reshape there is @@ -164,6 +164,8 @@ config MD_RAID5_RESHAPE There should be enough spares already present to make the new array workable. + If unsure, say Y. + config MD_MULTIPATH tristate "Multipath I/O support" depends on BLK_DEV_MD @@ -201,6 +203,14 @@ config BLK_DEV_DM If unsure, say N. +config DM_DEBUG + boolean "Device mapper debugging support" + depends on BLK_DEV_DM && EXPERIMENTAL + ---help--- + Enable this for messages that may help debug device-mapper problems. + + If unsure, say N. + config DM_CRYPT tristate "Crypt target support" depends on BLK_DEV_DM && EXPERIMENTAL diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index ecc56765d94..8e67634e79a 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -613,6 +613,7 @@ static inline unsigned long file_page_offset(unsigned long chunk) static inline struct page *filemap_get_page(struct bitmap *bitmap, unsigned long chunk) { + if (file_page_index(chunk) >= bitmap->file_pages) return NULL; return bitmap->filemap[file_page_index(chunk) - file_page_index(0)]; } @@ -739,6 +740,7 @@ static void bitmap_file_set_bit(struct bitmap *bitmap, sector_t block) } page = filemap_get_page(bitmap, chunk); + if (!page) return; bit = file_page_offset(chunk); /* set the bit */ @@ -1322,6 +1324,18 @@ static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int n } +/* dirty the memory and file bits for bitmap chunks "s" to "e" */ +void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e) +{ + unsigned long chunk; + + for (chunk = s; chunk <= e; chunk++) { + sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap); + bitmap_set_memory_bits(bitmap, sec, 1); + bitmap_file_set_bit(bitmap, sec); + } +} + /* * flush out any pending updates */ @@ -1430,8 +1444,7 @@ int bitmap_create(mddev_t *mddev) if (err) goto error; - bitmap->chunkshift = find_first_bit(&bitmap->chunksize, - sizeof(bitmap->chunksize)); + bitmap->chunkshift = ffz(~bitmap->chunksize); /* now that chunksize and chunkshift are set, we can use these macros */ chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) / diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index bdbd34993a8..655d816760e 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1,6 +1,7 @@ /* * Copyright (C) 2003 Christophe Saout <christophe@saout.de> * Copyright (C) 2004 Clemens Fruhwirth <clemens@endorphin.org> + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. * * This file is released under the GPL. */ @@ -22,17 +23,19 @@ #include "dm.h" #define DM_MSG_PREFIX "crypt" +#define MESG_STR(x) x, sizeof(x) /* * per bio private data */ struct crypt_io { struct dm_target *target; - struct bio *bio; + struct bio *base_bio; struct bio *first_clone; struct work_struct work; atomic_t pending; int error; + int post_process; }; /* @@ -63,6 +66,7 @@ struct crypt_iv_operations { * Crypt: maps a linear range of a block device * and encrypts / decrypts at the same time. */ +enum flags { DM_CRYPT_SUSPENDED, DM_CRYPT_KEY_VALID }; struct crypt_config { struct dm_dev *dev; sector_t start; @@ -73,6 +77,7 @@ struct crypt_config { */ mempool_t *io_pool; mempool_t *page_pool; + struct bio_set *bs; /* * crypto related data @@ -86,11 +91,12 @@ struct crypt_config { char cipher[CRYPTO_MAX_ALG_NAME]; char chainmode[CRYPTO_MAX_ALG_NAME]; struct crypto_blkcipher *tfm; + unsigned long flags; unsigned int key_size; u8 key[0]; }; -#define MIN_IOS 256 +#define MIN_IOS 16 #define MIN_POOL_PAGES 32 #define MIN_BIO_PAGES 8 @@ -306,6 +312,14 @@ static int crypt_convert(struct crypt_config *cc, return r; } + static void dm_crypt_bio_destructor(struct bio *bio) + { + struct crypt_io *io = bio->bi_private; + struct crypt_config *cc = io->target->private; + + bio_free(bio, cc->bs); + } + /* * Generate a new unfragmented bio with the given size * This should never violate the device limitations @@ -315,34 +329,33 @@ static struct bio * crypt_alloc_buffer(struct crypt_config *cc, unsigned int size, struct bio *base_bio, unsigned int *bio_vec_idx) { - struct bio *bio; + struct bio *clone; unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; gfp_t gfp_mask = GFP_NOIO | __GFP_HIGHMEM; unsigned int i; - /* - * Use __GFP_NOMEMALLOC to tell the VM to act less aggressively and - * to fail earlier. This is not necessary but increases throughput. - * FIXME: Is this really intelligent? - */ - if (base_bio) - bio = bio_clone(base_bio, GFP_NOIO|__GFP_NOMEMALLOC); - else - bio = bio_alloc(GFP_NOIO|__GFP_NOMEMALLOC, nr_iovecs); - if (!bio) + if (base_bio) { + clone = bio_alloc_bioset(GFP_NOIO, base_bio->bi_max_vecs, cc->bs); + __bio_clone(clone, base_bio); + } else + clone = bio_alloc_bioset(GFP_NOIO, nr_iovecs, cc->bs); + + if (!clone) return NULL; + clone->bi_destructor = dm_crypt_bio_destructor; + /* if the last bio was not complete, continue where that one ended */ - bio->bi_idx = *bio_vec_idx; - bio->bi_vcnt = *bio_vec_idx; - bio->bi_size = 0; - bio->bi_flags &= ~(1 << BIO_SEG_VALID); + clone->bi_idx = *bio_vec_idx; + clone->bi_vcnt = *bio_vec_idx; + clone->bi_size = 0; + clone->bi_flags &= ~(1 << BIO_SEG_VALID); - /* bio->bi_idx pages have already been allocated */ - size -= bio->bi_idx * PAGE_SIZE; + /* clone->bi_idx pages have already been allocated */ + size -= clone->bi_idx * PAGE_SIZE; - for(i = bio->bi_idx; i < nr_iovecs; i++) { - struct bio_vec *bv = bio_iovec_idx(bio, i); + for (i = clone->bi_idx; i < nr_iovecs; i++) { + struct bio_vec *bv = bio_iovec_idx(clone, i); bv->bv_page = mempool_alloc(cc->page_pool, gfp_mask); if (!bv->bv_page) @@ -353,7 +366,7 @@ crypt_alloc_buffer(struct crypt_config *cc, unsigned int size, * return a partially allocated bio, the caller will then try * to allocate additional bios while submitting this partial bio */ - if ((i - bio->bi_idx) == (MIN_BIO_PAGES - 1)) + if ((i - clone->bi_idx) == (MIN_BIO_PAGES - 1)) gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT; bv->bv_offset = 0; @@ -362,13 +375,13 @@ crypt_alloc_buffer(struct crypt_config *cc, unsigned int size, else bv->bv_len = size; - bio->bi_size += bv->bv_len; - bio->bi_vcnt++; + clone->bi_size += bv->bv_len; + clone->bi_vcnt++; size -= bv->bv_len; } - if (!bio->bi_size) { - bio_put(bio); + if (!clone->bi_size) { + bio_put(clone); return NULL; } @@ -376,13 +389,13 @@ crypt_alloc_buffer(struct crypt_config *cc, unsigned int size, * Remember the last bio_vec allocated to be able * to correctly continue after the splitting. */ - *bio_vec_idx = bio->bi_vcnt; + *bio_vec_idx = clone->bi_vcnt; - return bio; + return clone; } static void crypt_free_buffer_pages(struct crypt_config *cc, - struct bio *bio, unsigned int bytes) + struct bio *clone, unsigned int bytes) { unsigned int i, start, end; struct bio_vec *bv; @@ -396,19 +409,19 @@ static void crypt_free_buffer_pages(struct crypt_config *cc, * A fix to the bi_idx issue in the kernel is in the works, so * we will hopefully be able to revert to the cleaner solution soon. */ - i = bio->bi_vcnt - 1; - bv = bio_iovec_idx(bio, i); - end = (i << PAGE_SHIFT) + (bv->bv_offset + bv->bv_len) - bio->bi_size; + i = clone->bi_vcnt - 1; + bv = bio_iovec_idx(clone, i); + end = (i << PAGE_SHIFT) + (bv->bv_offset + bv->bv_len) - clone->bi_size; start = end - bytes; start >>= PAGE_SHIFT; - if (!bio->bi_size) - end = bio->bi_vcnt; + if (!clone->bi_size) + end = clone->bi_vcnt; else end >>= PAGE_SHIFT; - for(i = start; i < end; i++) { - bv = bio_iovec_idx(bio, i); + for (i = start; i < end; i++) { + bv = bio_iovec_idx(clone, i); BUG_ON(!bv->bv_page); mempool_free(bv->bv_page, cc->page_pool); bv->bv_page = NULL; @@ -432,7 +445,7 @@ static void dec_pending(struct crypt_io *io, int error) if (io->first_clone) bio_put(io->first_clone); - bio_endio(io->bio, io->bio->bi_size, io->error); + bio_endio(io->base_bio, io->base_bio->bi_size, io->error); mempool_free(io, cc->io_pool); } @@ -441,29 +454,179 @@ static void dec_pending(struct crypt_io *io, int error) * kcryptd: * * Needed because it would be very unwise to do decryption in an - * interrupt context, so bios returning from read requests get - * queued here. + * interrupt context. */ static struct workqueue_struct *_kcryptd_workqueue; +static void kcryptd_do_work(void *data); -static void kcryptd_do_work(void *data) +static void kcryptd_queue_io(struct crypt_io *io) { - struct crypt_io *io = (struct crypt_io *) data; - struct crypt_config *cc = (struct crypt_config *) io->target->private; + INIT_WORK(&io->work, kcryptd_do_work, io); + queue_work(_kcryptd_workqueue, &io->work); +} + +static int crypt_endio(struct bio *clone, unsigned int done, int error) +{ + struct crypt_io *io = clone->bi_private; + struct crypt_config *cc = io->target->private; + unsigned read_io = bio_data_dir(clone) == READ; + + /* + * free the processed pages, even if + * it's only a partially completed write + */ + if (!read_io) + crypt_free_buffer_pages(cc, clone, done); + + /* keep going - not finished yet */ + if (unlikely(clone->bi_size)) + return 1; + + if (!read_io) + goto out; + + if (unlikely(!bio_flagged(clone, BIO_UPTODATE))) { + error = -EIO; + goto out; + } + + bio_put(clone); + io->post_process = 1; + kcryptd_queue_io(io); + return 0; + +out: + bio_put(clone); + dec_pending(io, error); + return error; +} + +static void clone_init(struct crypt_io *io, struct bio *clone) +{ + struct crypt_config *cc = io->target->private; + + clone->bi_private = io; + clone->bi_end_io = crypt_endio; + clone->bi_bdev = cc->dev->bdev; + clone->bi_rw = io->base_bio->bi_rw; +} + +static void process_read(struct crypt_io *io) +{ + struct crypt_config *cc = io->target->private; + struct bio *base_bio = io->base_bio; + struct bio *clone; + sector_t sector = base_bio->bi_sector - io->target->begin; + + atomic_inc(&io->pending); + + /* + * The block layer might modify the bvec array, so always + * copy the required bvecs because we need the original + * one in order to decrypt the whole bio data *afterwards*. + */ + clone = bio_alloc_bioset(GFP_NOIO, bio_segments(base_bio), cc->bs); + if (unlikely(!clone)) { + dec_pending(io, -ENOMEM); + return; + } + + clone_init(io, clone); + clone->bi_destructor = dm_crypt_bio_destructor; + clone->bi_idx = 0; + clone->bi_vcnt = bio_segments(base_bio); + clone->bi_size = base_bio->bi_size; + clone->bi_sector = cc->start + sector; + memcpy(clone->bi_io_vec, bio_iovec(base_bio), + sizeof(struct bio_vec) * clone->bi_vcnt); + + generic_make_request(clone); +} + +static void process_write(struct crypt_io *io) +{ + struct crypt_config *cc = io->target->private; + struct bio *base_bio = io->base_bio; + struct bio *clone; struct convert_context ctx; - int r; + unsigned remaining = base_bio->bi_size; + sector_t sector = base_bio->bi_sector - io->target->begin; + unsigned bvec_idx = 0; + + atomic_inc(&io->pending); + + crypt_convert_init(cc, &ctx, NULL, base_bio, sector, 1); + + /* + * The allocated buffers can be smaller than the whole bio, + * so repeat the whole process until all the data can be handled. + */ + while (remaining) { + clone = crypt_alloc_buffer(cc, base_bio->bi_size, + io->first_clone, &bvec_idx); + if (unlikely(!clone)) { + dec_pending(io, -ENOMEM); + return; + } + + ctx.bio_out = clone; + + if (unlikely(crypt_convert(cc, &ctx) < 0)) { + crypt_free_buffer_pages(cc, clone, clone->bi_size); + bio_put(clone); + dec_pending(io, -EIO); + return; + } + + clone_init(io, clone); + clone->bi_sector = cc->start + sector; + + if (!io->first_clone) { + /* + * hold a reference to the first clone, because it + * holds the bio_vec array and that can't be freed + * before all other clones are released + */ + bio_get(clone); + io->first_clone = clone; + } + + remaining -= clone->bi_size; + sector += bio_sectors(clone); + + /* prevent bio_put of first_clone */ + if (remaining) + atomic_inc(&io->pending); - crypt_convert_init(cc, &ctx, io->bio, io->bio, - io->bio->bi_sector - io->target->begin, 0); - r = crypt_convert(cc, &ctx); + generic_make_request(clone); - dec_pending(io, r); + /* out of memory -> run queues */ + if (remaining) + blk_congestion_wait(bio_data_dir(clone), HZ/100); + } } -static void kcryptd_queue_io(struct crypt_io *io) +static void process_read_endio(struct crypt_io *io) { - INIT_WORK(&io->work, kcryptd_do_work, io); - queue_work(_kcryptd_workqueue, &io->work); + struct crypt_config *cc = io->target->private; + struct convert_context ctx; + + crypt_convert_init(cc, &ctx, io->base_bio, io->base_bio, + io->base_bio->bi_sector - io->target->begin, 0); + + dec_pending(io, crypt_convert(cc, &ctx)); +} + +static void kcryptd_do_work(void *data) +{ + struct crypt_io *io = data; + + if (io->post_process) + process_read_endio(io); + else if (bio_data_dir(io->base_bio) == READ) + process_read(io); + else + process_write(io); } /* @@ -477,7 +640,7 @@ static int crypt_decode_key(u8 *key, char *hex, unsigned int size) buffer[2] = '\0'; - for(i = 0; i < size; i++) { + for (i = 0; i < size; i++) { buffer[0] = *hex++; buffer[1] = *hex++; @@ -500,13 +663,38 @@ static void crypt_encode_key(char *hex, u8 *key, unsigned int size) { unsigned int i; - for(i = 0; i < size; i++) { + for (i = 0; i < size; i++) { sprintf(hex, "%02x", *key); hex += 2; key++; } } +static int crypt_set_key(struct crypt_config *cc, char *key) +{ + unsigned key_size = strlen(key) >> 1; + + if (cc->key_size && cc->key_size != key_size) + return -EINVAL; + + cc->key_size = key_size; /* initial settings */ + + if ((!key_size && strcmp(key, "-")) || + (key_size && crypt_decode_key(cc->key, key, key_size) < 0)) + return -EINVAL; + + set_bit(DM_CRYPT_KEY_VALID, &cc->flags); + + return 0; +} + +static int crypt_wipe_key(struct crypt_config *cc) +{ + clear_bit(DM_CRYPT_KEY_VALID, &cc->flags); + memset(&cc->key, 0, cc->key_size * sizeof(u8)); + return 0; +} + /* * Construct an encryption mapping: * <cipher> <key> <iv_offset> <dev_path> <start> @@ -539,16 +727,14 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) key_size = strlen(argv[1]) >> 1; - cc = kmalloc(sizeof(*cc) + key_size * sizeof(u8), GFP_KERNEL); + cc = kzalloc(sizeof(*cc) + key_size * sizeof(u8), GFP_KERNEL); if (cc == NULL) { ti->error = "Cannot allocate transparent encryption context"; return -ENOMEM; } - cc->key_size = key_size; - if ((!key_size && strcmp(argv[1], "-") != 0) || - (key_size && crypt_decode_key(cc->key, argv[1], key_size) < 0)) { + if (crypt_set_key(cc, argv[1])) { ti->error = "Error decoding key"; goto bad1; } @@ -626,6 +812,12 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad4; } + cc->bs = bioset_create(MIN_IOS, MIN_IOS, 4); + if (!cc->bs) { + ti->error = "Cannot allocate crypt bioset"; + goto bad_bs; + } + if (crypto_blkcipher_setkey(tfm, cc->key, key_size) < 0) { ti->error = "Error setting key"; goto bad5; @@ -665,6 +857,8 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) return 0; bad5: + bioset_free(cc->bs); +bad_bs: mempool_destroy(cc->page_pool); bad4: mempool_destroy(cc->io_pool); @@ -684,6 +878,7 @@ static void crypt_dtr(struct dm_target *ti) { struct crypt_config *cc = (struct crypt_config *) ti->private; + bioset_free(cc->bs); mempool_destroy(cc->page_pool); mempool_destroy(cc->io_pool); @@ -698,147 +893,21 @@ static void crypt_dtr(struct dm_target *ti) kfree(cc); } -static int crypt_endio(struct bio *bio, unsigned int done, int error) -{ - struct crypt_io *io = (struct crypt_io *) bio->bi_private; - struct crypt_config *cc = (struct crypt_config *) io->target->private; - - if (bio_data_dir(bio) == WRITE) { - /* - * free the processed pages, even if - * it's only a partially completed write - */ - crypt_free_buffer_pages(cc, bio, done); - } - - if (bio->bi_size) - return 1; - - bio_put(bio); - - /* - * successful reads are decrypted by the worker thread - */ - if ((bio_data_dir(bio) == READ) - && bio_flagged(bio, BIO_UPTODATE)) { - kcryptd_queue_io(io); - return 0; - } - - dec_pending(io, error); - return error; -} - -static inline struct bio * -crypt_clone(struct crypt_config *cc, struct crypt_io *io, struct bio *bio, - sector_t sector, unsigned int *bvec_idx, - struct convert_context *ctx) -{ - struct bio *clone; - - if (bio_data_dir(bio) == WRITE) { - clone = crypt_alloc_buffer(cc, bio->bi_size, - io->first_clone, bvec_idx); - if (clone) { - ctx->bio_out = clone; - if (crypt_convert(cc, ctx) < 0) { - crypt_free_buffer_pages(cc, clone, - clone->bi_size); - bio_put(clone); - return NULL; - } - } - } else { - /* - * The block layer might modify the bvec array, so always - * copy the required bvecs because we need the original - * one in order to decrypt the whole bio data *afterwards*. - */ - clone = bio_alloc(GFP_NOIO, bio_segments(bio)); - if (clone) { - clone->bi_idx = 0; - clone->bi_vcnt = bio_segments(bio); - clone->bi_size = bio->bi_size; - memcpy(clone->bi_io_vec, bio_iovec(bio), - sizeof(struct bio_vec) * clone->bi_vcnt); - } - } - - if (!clone) - return NULL; - - clone->bi_private = io; - clone->bi_end_io = crypt_endio; - clone->bi_bdev = cc->dev->bdev; - clone->bi_sector = cc->start + sector; - clone->bi_rw = bio->bi_rw; - - return clone; -} - static int crypt_map(struct dm_target *ti, struct bio *bio, union map_info *map_context) { - struct crypt_config *cc = (struct crypt_config *) ti->private; - struct crypt_io *io = mempool_alloc(cc->io_pool, GFP_NOIO); - struct convert_context ctx; - struct bio *clone; - unsigned int remaining = bio->bi_size; - sector_t sector = bio->bi_sector - ti->begin; - unsigned int bvec_idx = 0; + struct crypt_config *cc = ti->private; + struct crypt_io *io; + io = mempool_alloc(cc->io_pool, GFP_NOIO); io->target = ti; - io->bio = bio; + io->base_bio = bio; io->first_clone = NULL; - io->error = 0; - atomic_set(&io->pending, 1); /* hold a reference */ - - if (bio_data_dir(bio) == WRITE) - crypt_convert_init(cc, &ctx, NULL, bio, sector, 1); - - /* - * The allocated buffers can be smaller than the whole bio, - * so repeat the whole process until all the data can be handled. - */ - while (remaining) { - clone = crypt_clone(cc, io, bio, sector, &bvec_idx, &ctx); - if (!clone) - goto cleanup; - - if (!io->first_clone) { - /* - * hold a reference to the first clone, because it - * holds the bio_vec array and that can't be freed - * before all other clones are released - */ - bio_get(clone); - io->first_clone = clone; - } - atomic_inc(&io->pending); + io->error = io->post_process = 0; + atomic_set(&io->pending, 0); + kcryptd_queue_io(io); - remaining -= clone->bi_size; - sector += bio_sectors(clone); - - generic_make_request(clone); - - /* out of memory -> run queues */ - if (remaining) - blk_congestion_wait(bio_data_dir(clone), HZ/100); - } - - /* drop reference, clones could have returned before we reach this */ - dec_pending(io, 0); return 0; - -cleanup: - if (io->first_clone) { - dec_pending(io, -ENOMEM); - return 0; - } - - /* if no bio has been dispatched yet, we can directly return the error */ - mempool_free(io, cc->io_pool); - return -ENOMEM; } static int crypt_status(struct dm_target *ti, status_type_t type, @@ -883,14 +952,71 @@ static int crypt_status(struct dm_target *ti, status_type_t type, return 0; } +static void crypt_postsuspend(struct dm_target *ti) +{ + struct crypt_config *cc = ti->private; + + set_bit(DM_CRYPT_SUSPENDED, &cc->flags); +} + +static int crypt_preresume(struct dm_target *ti) +{ + struct crypt_config *cc = ti->private; + + if (!test_bit(DM_CRYPT_KEY_VALID, &cc->flags)) { + DMERR("aborting resume - crypt key is not set."); + return -EAGAIN; + } + + return 0; +} + +static void crypt_resume(struct dm_target *ti) +{ + struct crypt_config *cc = ti->private; + + clear_bit(DM_CRYPT_SUSPENDED, &cc->flags); +} + +/* Message interface + * key set <key> + * key wipe + */ +static int crypt_message(struct dm_target *ti, unsigned argc, char **argv) +{ + struct crypt_config *cc = ti->private; + + if (argc < 2) + goto error; + + if (!strnicmp(argv[0], MESG_STR("key"))) { + if (!test_bit(DM_CRYPT_SUSPENDED, &cc->flags)) { + DMWARN("not suspended during key manipulation."); + return -EINVAL; + } + if (argc == 3 && !strnicmp(argv[1], MESG_STR("set"))) + return crypt_set_key(cc, argv[2]); + if (argc == 2 && !strnicmp(argv[1], MESG_STR("wipe"))) + return crypt_wipe_key(cc); + } + +error: + DMWARN("unrecognised message received."); + return -EINVAL; +} + static struct target_type crypt_target = { .name = "crypt", - .version= {1, 1, 0}, + .version= {1, 3, 0}, .module = THIS_MODULE, .ctr = crypt_ctr, .dtr = crypt_dtr, .map = crypt_map, .status = crypt_status, + .postsuspend = crypt_postsuspend, + .preresume = crypt_preresume, + .resume = crypt_resume, + .message = crypt_message, }; static int __init dm_crypt_init(void) diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index d12379b5cdb..99cdffa7fbf 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #define DM_MSG_PREFIX "snapshots" +#define DM_CHUNK_SIZE_DEFAULT_SECTORS 32 /* 16KB */ /*----------------------------------------------------------------- * Persistent snapshots, by persistent we mean that the snapshot @@ -150,6 +151,7 @@ static int alloc_area(struct pstore *ps) static void free_area(struct pstore *ps) { vfree(ps->area); + ps->area = NULL; } /* @@ -198,48 +200,79 @@ static int read_header(struct pstore *ps, int *new_snapshot) int r; struct disk_header *dh; chunk_t chunk_size; + int chunk_size_supplied = 1; - r = chunk_io(ps, 0, READ); + /* + * Use default chunk size (or hardsect_size, if larger) if none supplied + */ + if (!ps->snap->chunk_size) { + ps->snap->chunk_size = max(DM_CHUNK_SIZE_DEFAULT_SECTORS, + bdev_hardsect_size(ps->snap->cow->bdev) >> 9); + ps->snap->chunk_mask = ps->snap->chunk_size - 1; + ps->snap->chunk_shift = ffs(ps->snap->chunk_size) - 1; + chunk_size_supplied = 0; + } + + r = dm_io_get(sectors_to_pages(ps->snap->chunk_size)); if (r) return r; + r = alloc_area(ps); + if (r) + goto bad1; + + r = chunk_io(ps, 0, READ); + if (r) + goto bad2; + dh = (struct disk_header *) ps->area; if (le32_to_cpu(dh->magic) == 0) { *new_snapshot = 1; + return 0; + } - } else if (le32_to_cpu(dh->magic) == SNAP_MAGIC) { - *new_snapshot = 0; - ps->valid = le32_to_cpu(dh->valid); - ps->version = le32_to_cpu(dh->version); - chunk_size = le32_to_cpu(dh->chunk_size); - if (ps->snap->chunk_size != chunk_size) { - DMWARN("chunk size %llu in device metadata overrides " - "table chunk size of %llu.", - (unsigned long long)chunk_size, - (unsigned long long)ps->snap->chunk_size); - - /* We had a bogus chunk_size. Fix stuff up. */ - dm_io_put(sectors_to_pages(ps->snap->chunk_size)); - free_area(ps); - - ps->snap->chunk_size = chunk_size; - ps->snap->chunk_mask = chunk_size - 1; - ps->snap->chunk_shift = ffs(chunk_size) - 1; - - r = alloc_area(ps); - if (r) - return r; - - r = dm_io_get(sectors_to_pages(chunk_size)); - if (r) - return r; - } - } else { - DMWARN("Invalid/corrupt snapshot"); + if (le32_to_cpu(dh->magic) != SNAP_MAGIC) { + DMWARN("Invalid or corrupt snapshot"); r = -ENXIO; + goto bad2; } + *new_snapshot = 0; + ps->valid = le32_to_cpu(dh->valid); + ps->version = le32_to_cpu(dh->version); + chunk_size = le32_to_cpu(dh->chunk_size); + + if (!chunk_size_supplied || ps->snap->chunk_size == chunk_size) + return 0; + + DMWARN("chunk size %llu in device metadata overrides " + "table chunk size of %llu.", + (unsigned long long)chunk_size, + (unsigned long long)ps->snap->chunk_size); + + /* We had a bogus chunk_size. Fix stuff up. */ + dm_io_put(sectors_to_pages(ps->snap->chunk_size)); + free_area(ps); + + ps->snap->chunk_size = chunk_size; + ps->snap->chunk_mask = chunk_size - 1; + ps->snap->chunk_shift = ffs(chunk_size) - 1; + + r = dm_io_get(sectors_to_pages(chunk_size)); + if (r) + return r; + + r = alloc_area(ps); + if (r) + goto bad1; + + return 0; + +bad2: + free_area(ps); +bad1: + dm_io_put(sectors_to_pages(ps->snap->chunk_size)); return r; } @@ -263,42 +296,29 @@ static int write_header(struct pstore *ps) */ static struct disk_exception *get_exception(struct pstore *ps, uint32_t index) { - if (index >= ps->exceptions_per_area) - return NULL; + BUG_ON(index >= ps->exceptions_per_area); return ((struct disk_exception *) ps->area) + index; } -static int read_exception(struct pstore *ps, - uint32_t index, struct disk_exception *result) +static void read_exception(struct pstore *ps, + uint32_t index, struct disk_exception *result) { - struct disk_exception *e; - - e = get_exception(ps, index); - if (!e) - return -EINVAL; + struct disk_exception *e = get_exception(ps, index); /* copy it */ result->old_chunk = le64_to_cpu(e->old_chunk); result->new_chunk = le64_to_cpu(e->new_chunk); - - return 0; } -static int write_exception(struct pstore *ps, - uint32_t index, struct disk_exception *de) +static void write_exception(struct pstore *ps, + uint32_t index, struct disk_exception *de) { - struct disk_exception *e; - - e = get_exception(ps, index); - if (!e) - return -EINVAL; + struct disk_exception *e = get_exception(ps, index); /* copy it */ e->old_chunk = cpu_to_le64(de->old_chunk); e->new_chunk = cpu_to_le64(de->new_chunk); - - return 0; } /* @@ -316,10 +336,7 @@ static int insert_exceptions(struct pstore *ps, int *full) *full = 1; for (i = 0; i < ps->exceptions_per_area; i++) { - r = read_exception(ps, i, &de); - - if (r) - return r; + read_exception(ps, i, &de); /* * If the new_chunk is pointing at the start of @@ -519,6 +536,16 @@ static void persistent_commit(struct exception_store *store, if (r) ps->valid = 0; + /* + * Have we completely filled the current area ? + */ + if (ps->current_committed == ps->exceptions_per_area) { + ps->current_committed = 0; + r = zero_area(ps, ps->current_area + 1); + if (r) + ps->valid = 0; + } + for (i = 0; i < ps->callback_count; i++) { cb = ps->callbacks + i; cb->callback(cb->context, r == 0 ? 1 : 0); @@ -526,16 +553,6 @@ static void persistent_commit(struct exception_store *store, ps->callback_count = 0; } - - /* - * Have we completely filled the current area ? - */ - if (ps->current_committed == ps->exceptions_per_area) { - ps->current_committed = 0; - r = zero_area(ps, ps->current_area + 1); - if (r) - ps->valid = 0; - } } static void persistent_drop(struct exception_store *store) @@ -547,32 +564,22 @@ static void persistent_drop(struct exception_store *store) DMWARN("write header failed"); } -int dm_create_persistent(struct exception_store *store, uint32_t chunk_size) +int dm_create_persistent(struct exception_store *store) { - int r; struct pstore *ps; - r = dm_io_get(sectors_to_pages(chunk_size)); - if (r) - return r; - /* allocate the pstore */ ps = kmalloc(sizeof(*ps), GFP_KERNEL); - if (!ps) { - r = -ENOMEM; - goto bad; - } + if (!ps) + return -ENOMEM; ps->snap = store->snap; ps->valid = 1; ps->version = SNAPSHOT_DISK_VERSION; + ps->area = NULL; ps->next_free = 2; /* skipping the header and first area */ ps->current_committed = 0; - r = alloc_area(ps); - if (r) - goto bad; - ps->callback_count = 0; atomic_set(&ps->pending_count, 0); ps->callbacks = NULL; @@ -586,13 +593,6 @@ int dm_create_persistent(struct exception_store *store, uint32_t chunk_size) store->context = ps; return 0; - - bad: - dm_io_put(sectors_to_pages(chunk_size)); - if (ps && ps->area) - free_area(ps); - kfree(ps); - return r; } /*----------------------------------------------------------------- @@ -642,18 +642,16 @@ static void transient_fraction_full(struct exception_store *store, *denominator = get_dev_size(store->snap->cow->bdev); } -int dm_create_transient(struct exception_store *store, - struct dm_snapshot *s, int blocksize) +int dm_create_transient(struct exception_store *store) { struct transient_c *tc; - memset(store, 0, sizeof(*store)); store->destroy = transient_destroy; store->read_metadata = transient_read_metadata; store->prepare_exception = transient_prepare; store->commit_exception = transient_commit; + store->drop_snapshot = NULL; store->fraction_full = transient_fraction_full; - store->snap = s; tc = kmalloc(sizeof(struct transient_c), GFP_KERNEL); if (!tc) diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index 47b3c62bbdb..00234909b3d 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -98,14 +98,31 @@ static int linear_status(struct dm_target *ti, status_type_t type, return 0; } +static int linear_ioctl(struct dm_target *ti, struct inode *inode, + struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct linear_c *lc = (struct linear_c *) ti->private; + struct block_device *bdev = lc->dev->bdev; + struct file fake_file = {}; + struct dentry fake_dentry = {}; + + fake_file.f_mode = lc->dev->mode; + fake_file.f_dentry = &fake_dentry; + fake_dentry.d_inode = bdev->bd_inode; + + return blkdev_driver_ioctl(bdev->bd_inode, &fake_file, bdev->bd_disk, cmd, arg); +} + static struct target_type linear_target = { .name = "linear", - .version= {1, 0, 1}, + .version= {1, 0, 2}, .module = THIS_MODULE, .ctr = linear_ctr, .dtr = linear_dtr, .map = linear_map, .status = linear_status, + .ioctl = linear_ioctl, }; int __init dm_linear_init(void) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 93f701ea87b..d754e0bc6e9 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -114,12 +114,10 @@ static void trigger_event(void *data); static struct pgpath *alloc_pgpath(void) { - struct pgpath *pgpath = kmalloc(sizeof(*pgpath), GFP_KERNEL); + struct pgpath *pgpath = kzalloc(sizeof(*pgpath), GFP_KERNEL); - if (pgpath) { - memset(pgpath, 0, sizeof(*pgpath)); + if (pgpath) pgpath->path.is_active = 1; - } return pgpath; } @@ -133,12 +131,10 @@ static struct priority_group *alloc_priority_group(void) { struct priority_group *pg; - pg = kmalloc(sizeof(*pg), GFP_KERNEL); - if (!pg) - return NULL; + pg = kzalloc(sizeof(*pg), GFP_KERNEL); - memset(pg, 0, sizeof(*pg)); - INIT_LIST_HEAD(&pg->pgpaths); + if (pg) + INIT_LIST_HEAD(&pg->pgpaths); return pg; } @@ -168,13 +164,12 @@ static void free_priority_group(struct priority_group *pg, kfree(pg); } -static struct multipath *alloc_multipath(void) +static struct multipath *alloc_multipath(struct dm_target *ti) { struct multipath *m; - m = kmalloc(sizeof(*m), GFP_KERNEL); + m = kzalloc(sizeof(*m), GFP_KERNEL); if (m) { - memset(m, 0, sizeof(*m)); INIT_LIST_HEAD(&m->priority_groups); spin_lock_init(&m->lock); m->queue_io = 1; @@ -185,6 +180,8 @@ static struct multipath *alloc_multipath(void) kfree(m); return NULL; } + m->ti = ti; + ti->private = m; } return m; @@ -557,8 +554,7 @@ static struct pgpath *parse_path(struct arg_set *as, struct path_selector *ps, } static struct priority_group *parse_priority_group(struct arg_set *as, - struct multipath *m, - struct dm_target *ti) + struct multipath *m) { static struct param _params[] = { {1, 1024, "invalid number of paths"}, @@ -568,6 +564,7 @@ static struct priority_group *parse_priority_group(struct arg_set *as, int r; unsigned i, nr_selector_args, nr_params; struct priority_group *pg; + struct dm_target *ti = m->ti; if (as->argc < 2) { as->argc = 0; @@ -624,12 +621,12 @@ static struct priority_group *parse_priority_group(struct arg_set *as, return NULL; } -static int parse_hw_handler(struct arg_set *as, struct multipath *m, - struct dm_target *ti) +static int parse_hw_handler(struct arg_set *as, struct multipath *m) { int r; struct hw_handler_type *hwht; unsigned hw_argc; + struct dm_target *ti = m->ti; static struct param _params[] = { {0, 1024, "invalid number of hardware handler args"}, @@ -661,11 +658,11 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m, return 0; } -static int parse_features(struct arg_set *as, struct multipath *m, - struct dm_target *ti) +static int parse_features(struct arg_set *as, struct multipath *m) { int r; unsigned argc; + struct dm_target *ti = m->ti; static struct param _params[] = { {0, 1, "invalid number of feature args"}, @@ -704,19 +701,17 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, as.argc = argc; as.argv = argv; - m = alloc_multipath(); + m = alloc_multipath(ti); if (!m) { ti->error = "can't allocate multipath"; return -EINVAL; } - m->ti = ti; - - r = parse_features(&as, m, ti); + r = parse_features(&as, m); if (r) goto bad; - r = parse_hw_handler(&as, m, ti); + r = parse_hw_handler(&as, m); if (r) goto bad; @@ -732,7 +727,7 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, while (as.argc) { struct priority_group *pg; - pg = parse_priority_group(&as, m, ti); + pg = parse_priority_group(&as, m); if (!pg) { r = -EINVAL; goto bad; @@ -752,8 +747,6 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, goto bad; } - ti->private = m; - return 0; bad: @@ -1266,12 +1259,47 @@ error: return -EINVAL; } +static int multipath_ioctl(struct dm_target *ti, struct inode *inode, + struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct multipath *m = (struct multipath *) ti->private; + struct block_device *bdev = NULL; + unsigned long flags; + struct file fake_file = {}; + struct dentry fake_dentry = {}; + int r = 0; + + fake_file.f_dentry = &fake_dentry; + + spin_lock_irqsave(&m->lock, flags); + + if (!m->current_pgpath) + __choose_pgpath(m); + + if (m->current_pgpath) { + bdev = m->current_pgpath->path.dev->bdev; + fake_dentry.d_inode = bdev->bd_inode; + fake_file.f_mode = m->current_pgpath->path.dev->mode; + } + + if (m->queue_io) + r = -EAGAIN; + else if (!bdev) + r = -EIO; + + spin_unlock_irqrestore(&m->lock, flags); + + return r ? : blkdev_driver_ioctl(bdev->bd_inode, &fake_file, + bdev->bd_disk, cmd, arg); +} + /*----------------------------------------------------------------- * Module setup *---------------------------------------------------------------*/ static struct target_type multipath_target = { .name = "multipath", - .version = {1, 0, 4}, + .version = {1, 0, 5}, .module = THIS_MODULE, .ctr = multipath_ctr, .dtr = multipath_dtr, @@ -1281,6 +1309,7 @@ static struct target_type multipath_target = { .resume = multipath_resume, .status = multipath_status, .message = multipath_message, + .ioctl = multipath_ioctl, }; static int __init dm_multipath_init(void) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index c54de989eb0..659224cb7c5 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1213,9 +1213,9 @@ static int mirror_status(struct dm_target *ti, status_type_t type, break; case STATUSTYPE_TABLE: - DMEMIT("%d ", ms->nr_mirrors); + DMEMIT("%d", ms->nr_mirrors); for (m = 0; m < ms->nr_mirrors; m++) - DMEMIT("%s %llu ", ms->mirror[m].dev->name, + DMEMIT(" %s %llu", ms->mirror[m].dev->name, (unsigned long long)ms->mirror[m].offset); } diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 1d0fafda0f7..5281e009407 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -39,6 +39,9 @@ */ #define SNAPSHOT_PAGES 256 +struct workqueue_struct *ksnapd; +static void flush_queued_bios(void *data); + struct pending_exception { struct exception e; @@ -56,7 +59,7 @@ struct pending_exception { /* * The primary pending_exception is the one that holds - * the sibling_count and the list of origin_bios for a + * the ref_count and the list of origin_bios for a * group of pending_exceptions. It is always last to get freed. * These fields get set up when writing to the origin. */ @@ -69,7 +72,7 @@ struct pending_exception { * the sibling concerned and not pe->primary_pe->snap->lock unless * they are the same. */ - atomic_t sibling_count; + atomic_t ref_count; /* Pointer back to snapshot context */ struct dm_snapshot *snap; @@ -387,15 +390,46 @@ static inline ulong round_up(ulong n, ulong size) return (n + size) & ~size; } -static void read_snapshot_metadata(struct dm_snapshot *s) +static int set_chunk_size(struct dm_snapshot *s, const char *chunk_size_arg, + char **error) { - if (s->store.read_metadata(&s->store)) { - down_write(&s->lock); - s->valid = 0; - up_write(&s->lock); + unsigned long chunk_size; + char *value; + + chunk_size = simple_strtoul(chunk_size_arg, &value, 10); + if (*chunk_size_arg == '\0' || *value != '\0') { + *error = "Invalid chunk size"; + return -EINVAL; + } + + if (!chunk_size) { + s->chunk_size = s->chunk_mask = s->chunk_shift = 0; + return 0; + } + + /* + * Chunk size must be multiple of page size. Silently + * round up if it's not. + */ + chunk_size = round_up(chunk_size, PAGE_SIZE >> 9); + + /* Check chunk_size is a power of 2 */ + if (chunk_size & (chunk_size - 1)) { + *error = "Chunk size is not a power of 2"; + return -EINVAL; + } - dm_table_event(s->table); + /* Validate the chunk size against the device block size */ + if (chunk_size % (bdev_hardsect_size(s->cow->bdev) >> 9)) { + *error = "Chunk size is not a multiple of device blocksize"; + return -EINVAL; } + + s->chunk_size = chunk_size; + s->chunk_mask = chunk_size - 1; + s->chunk_shift = ffs(chunk_size) - 1; + + return 0; } /* @@ -404,15 +438,12 @@ static void read_snapshot_metadata(struct dm_snapshot *s) static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) { struct dm_snapshot *s; - unsigned long chunk_size; int r = -EINVAL; char persistent; char *origin_path; char *cow_path; - char *value; - int blocksize; - if (argc < 4) { + if (argc != 4) { ti->error = "requires exactly 4 arguments"; r = -EINVAL; goto bad1; @@ -428,13 +459,6 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad1; } - chunk_size = simple_strtoul(argv[3], &value, 10); - if (chunk_size == 0 || value == NULL) { - ti->error = "Invalid chunk size"; - r = -EINVAL; - goto bad1; - } - s = kmalloc(sizeof(*s), GFP_KERNEL); if (s == NULL) { ti->error = "Cannot allocate snapshot context private " @@ -457,36 +481,17 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad2; } - /* - * Chunk size must be multiple of page size. Silently - * round up if it's not. - */ - chunk_size = round_up(chunk_size, PAGE_SIZE >> 9); - - /* Validate the chunk size against the device block size */ - blocksize = s->cow->bdev->bd_disk->queue->hardsect_size; - if (chunk_size % (blocksize >> 9)) { - ti->error = "Chunk size is not a multiple of device blocksize"; - r = -EINVAL; - goto bad3; - } - - /* Check chunk_size is a power of 2 */ - if (chunk_size & (chunk_size - 1)) { - ti->error = "Chunk size is not a power of 2"; - r = -EINVAL; + r = set_chunk_size(s, argv[3], &ti->error); + if (r) goto bad3; - } - s->chunk_size = chunk_size; - s->chunk_mask = chunk_size - 1; s->type = persistent; - s->chunk_shift = ffs(chunk_size) - 1; s->valid = 1; s->active = 0; s->last_percent = 0; init_rwsem(&s->lock); + spin_lock_init(&s->pe_lock); s->table = ti->table; /* Allocate hash table for COW data */ @@ -496,16 +501,12 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad3; } - /* - * Check the persistent flag - done here because we need the iobuf - * to check the LV header - */ s->store.snap = s; if (persistent == 'P') - r = dm_create_persistent(&s->store, chunk_size); + r = dm_create_persistent(&s->store); else - r = dm_create_transient(&s->store, s, blocksize); + r = dm_create_transient(&s->store); if (r) { ti->error = "Couldn't create exception store"; @@ -520,7 +521,14 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) } /* Metadata must only be loaded into one table at once */ - read_snapshot_metadata(s); + r = s->store.read_metadata(&s->store); + if (r) { + ti->error = "Failed to read snapshot metadata"; + goto bad6; + } + + bio_list_init(&s->queued_bios); + INIT_WORK(&s->queued_bios_work, flush_queued_bios, s); /* Add snapshot to the list of snapshots for this origin */ /* Exceptions aren't triggered till snapshot_resume() is called */ @@ -560,6 +568,8 @@ static void snapshot_dtr(struct dm_target *ti) { struct dm_snapshot *s = (struct dm_snapshot *) ti->private; + flush_workqueue(ksnapd); + /* Prevent further origin writes from using this snapshot. */ /* After this returns there can be no new kcopyd jobs. */ unregister_snapshot(s); @@ -593,6 +603,19 @@ static void flush_bios(struct bio *bio) } } +static void flush_queued_bios(void *data) +{ + struct dm_snapshot *s = (struct dm_snapshot *) data; + struct bio *queued_bios; + unsigned long flags; + + spin_lock_irqsave(&s->pe_lock, flags); + queued_bios = bio_list_get(&s->queued_bios); + spin_unlock_irqrestore(&s->pe_lock, flags); + + flush_bios(queued_bios); +} + /* * Error a list of buffers. */ @@ -608,28 +631,7 @@ static void error_bios(struct bio *bio) } } -static inline void error_snapshot_bios(struct pending_exception *pe) -{ - error_bios(bio_list_get(&pe->snapshot_bios)); -} - -static struct bio *__flush_bios(struct pending_exception *pe) -{ - /* - * If this pe is involved in a write to the origin and - * it is the last sibling to complete then release - * the bios for the original write to the origin. - */ - - if (pe->primary_pe && - atomic_dec_and_test(&pe->primary_pe->sibling_count)) - return bio_list_get(&pe->primary_pe->origin_bios); - - return NULL; -} - -static void __invalidate_snapshot(struct dm_snapshot *s, - struct pending_exception *pe, int err) +static void __invalidate_snapshot(struct dm_snapshot *s, int err) { if (!s->valid) return; @@ -639,9 +641,6 @@ static void __invalidate_snapshot(struct dm_snapshot *s, else if (err == -ENOMEM) DMERR("Invalidating snapshot: Unable to allocate exception."); - if (pe) - remove_exception(&pe->e); - if (s->store.drop_snapshot) s->store.drop_snapshot(&s->store); @@ -650,78 +649,95 @@ static void __invalidate_snapshot(struct dm_snapshot *s, dm_table_event(s->table); } +static void get_pending_exception(struct pending_exception *pe) +{ + atomic_inc(&pe->ref_count); +} + +static struct bio *put_pending_exception(struct pending_exception *pe) +{ + struct pending_exception *primary_pe; + struct bio *origin_bios = NULL; + + primary_pe = pe->primary_pe; + + /* + * If this pe is involved in a write to the origin and + * it is the last sibling to complete then release + * the bios for the original write to the origin. + */ + if (primary_pe && + atomic_dec_and_test(&primary_pe->ref_count)) + origin_bios = bio_list_get(&primary_pe->origin_bios); + + /* + * Free the pe if it's not linked to an origin write or if + * it's not itself a primary pe. + */ + if (!primary_pe || primary_pe != pe) + free_pending_exception(pe); + + /* + * Free the primary pe if nothing references it. + */ + if (primary_pe && !atomic_read(&primary_pe->ref_count)) + free_pending_exception(primary_pe); + + return origin_bios; +} + static void pending_complete(struct pending_exception *pe, int success) { struct exception *e; - struct pending_exception *primary_pe; struct dm_snapshot *s = pe->snap; - struct bio *flush = NULL; + struct bio *origin_bios = NULL; + struct bio *snapshot_bios = NULL; + int error = 0; if (!success) { /* Read/write error - snapshot is unusable */ down_write(&s->lock); - __invalidate_snapshot(s, pe, -EIO); - flush = __flush_bios(pe); - up_write(&s->lock); - - error_snapshot_bios(pe); + __invalidate_snapshot(s, -EIO); + error = 1; goto out; } e = alloc_exception(); if (!e) { down_write(&s->lock); - __invalidate_snapshot(s, pe, -ENOMEM); - flush = __flush_bios(pe); - up_write(&s->lock); - - error_snapshot_bios(pe); + __invalidate_snapshot(s, -ENOMEM); + error = 1; goto out; } *e = pe->e; - /* - * Add a proper exception, and remove the - * in-flight exception from the list. - */ down_write(&s->lock); if (!s->valid) { - flush = __flush_bios(pe); - up_write(&s->lock); - free_exception(e); - - error_snapshot_bios(pe); + error = 1; goto out; } + /* + * Add a proper exception, and remove the + * in-flight exception from the list. + */ insert_exception(&s->complete, e); + + out: remove_exception(&pe->e); - flush = __flush_bios(pe); + snapshot_bios = bio_list_get(&pe->snapshot_bios); + origin_bios = put_pending_exception(pe); up_write(&s->lock); /* Submit any pending write bios */ - flush_bios(bio_list_get(&pe->snapshot_bios)); - - out: - primary_pe = pe->primary_pe; - - /* - * Free the pe if it's not linked to an origin write or if - * it's not itself a primary pe. - */ - if (!primary_pe || primary_pe != pe) - free_pending_exception(pe); - - /* - * Free the primary pe if nothing references it. - */ - if (primary_pe && !atomic_read(&primary_pe->sibling_count)) - free_pending_exception(primary_pe); + if (error) + error_bios(snapshot_bios); + else + flush_bios(snapshot_bios); - if (flush) - flush_bios(flush); + flush_bios(origin_bios); } static void commit_callback(void *context, int success) @@ -822,7 +838,7 @@ __find_pending_exception(struct dm_snapshot *s, struct bio *bio) bio_list_init(&pe->origin_bios); bio_list_init(&pe->snapshot_bios); pe->primary_pe = NULL; - atomic_set(&pe->sibling_count, 1); + atomic_set(&pe->ref_count, 0); pe->snap = s; pe->started = 0; @@ -831,6 +847,7 @@ __find_pending_exception(struct dm_snapshot *s, struct bio *bio) return NULL; } + get_pending_exception(pe); insert_exception(&s->pending, &pe->e); out: @@ -850,7 +867,6 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio, { struct exception *e; struct dm_snapshot *s = (struct dm_snapshot *) ti->private; - int copy_needed = 0; int r = 1; chunk_t chunk; struct pending_exception *pe = NULL; @@ -865,32 +881,31 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio, if (unlikely(bio_barrier(bio))) return -EOPNOTSUPP; + /* FIXME: should only take write lock if we need + * to copy an exception */ + down_write(&s->lock); + + if (!s->valid) { + r = -EIO; + goto out_unlock; + } + + /* If the block is already remapped - use that, else remap it */ + e = lookup_exception(&s->complete, chunk); + if (e) { + remap_exception(s, e, bio); + goto out_unlock; + } + /* * Write to snapshot - higher level takes care of RW/RO * flags so we should only get this if we are * writeable. */ if (bio_rw(bio) == WRITE) { - - /* FIXME: should only take write lock if we need - * to copy an exception */ - down_write(&s->lock); - - if (!s->valid) { - r = -EIO; - goto out_unlock; - } - - /* If the block is already remapped - use that, else remap it */ - e = lookup_exception(&s->complete, chunk); - if (e) { - remap_exception(s, e, bio); - goto out_unlock; - } - pe = __find_pending_exception(s, bio); if (!pe) { - __invalidate_snapshot(s, pe, -ENOMEM); + __invalidate_snapshot(s, -ENOMEM); r = -EIO; goto out_unlock; } @@ -898,45 +913,27 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio, remap_exception(s, &pe->e, bio); bio_list_add(&pe->snapshot_bios, bio); + r = 0; + if (!pe->started) { /* this is protected by snap->lock */ pe->started = 1; - copy_needed = 1; - } - - r = 0; - - out_unlock: - up_write(&s->lock); - - if (copy_needed) + up_write(&s->lock); start_copy(pe); - } else { + goto out; + } + } else /* * FIXME: this read path scares me because we * always use the origin when we have a pending * exception. However I can't think of a * situation where this is wrong - ejt. */ + bio->bi_bdev = s->origin->bdev; - /* Do reads */ - down_read(&s->lock); - - if (!s->valid) { - up_read(&s->lock); - return -EIO; - } - - /* See if it it has been remapped */ - e = lookup_exception(&s->complete, chunk); - if (e) - remap_exception(s, e, bio); - else - bio->bi_bdev = s->origin->bdev; - - up_read(&s->lock); - } - + out_unlock: + up_write(&s->lock); + out: return r; } @@ -1025,7 +1022,7 @@ static int __origin_write(struct list_head *snapshots, struct bio *bio) * is already remapped in this snapshot * and trigger an exception if not. * - * sibling_count is initialised to 1 so pending_complete() + * ref_count is initialised to 1 so pending_complete() * won't destroy the primary_pe while we're inside this loop. */ e = lookup_exception(&snap->complete, chunk); @@ -1034,7 +1031,7 @@ static int __origin_write(struct list_head *snapshots, struct bio *bio) pe = __find_pending_exception(snap, bio); if (!pe) { - __invalidate_snapshot(snap, pe, ENOMEM); + __invalidate_snapshot(snap, -ENOMEM); goto next_snapshot; } @@ -1056,8 +1053,8 @@ static int __origin_write(struct list_head *snapshots, struct bio *bio) } if (!pe->primary_pe) { - atomic_inc(&primary_pe->sibling_count); pe->primary_pe = primary_pe; + get_pending_exception(primary_pe); } if (!pe->started) { @@ -1070,20 +1067,20 @@ static int __origin_write(struct list_head *snapshots, struct bio *bio) } if (!primary_pe) - goto out; + return r; /* * If this is the first time we're processing this chunk and - * sibling_count is now 1 it means all the pending exceptions + * ref_count is now 1 it means all the pending exceptions * got completed while we were in the loop above, so it falls to * us here to remove the primary_pe and submit any origin_bios. */ - if (first && atomic_dec_and_test(&primary_pe->sibling_count)) { + if (first && atomic_dec_and_test(&primary_pe->ref_count)) { flush_bios(bio_list_get(&primary_pe->origin_bios)); free_pending_exception(primary_pe); /* If we got here, pe_queue is necessarily empty. */ - goto out; + return r; } /* @@ -1092,7 +1089,6 @@ static int __origin_write(struct list_head *snapshots, struct bio *bio) list_for_each_entry_safe(pe, next_pe, &pe_queue, list) start_copy(pe); - out: return r; } @@ -1205,7 +1201,7 @@ static int origin_status(struct dm_target *ti, status_type_t type, char *result, static struct target_type origin_target = { .name = "snapshot-origin", - .version = {1, 4, 0}, + .version = {1, 5, 0}, .module = THIS_MODULE, .ctr = origin_ctr, .dtr = origin_dtr, @@ -1216,7 +1212,7 @@ static struct target_type origin_target = { static struct target_type snapshot_target = { .name = "snapshot", - .version = {1, 4, 0}, + .version = {1, 5, 0}, .module = THIS_MODULE, .ctr = snapshot_ctr, .dtr = snapshot_dtr, @@ -1275,8 +1271,17 @@ static int __init dm_snapshot_init(void) goto bad5; } + ksnapd = create_singlethread_workqueue("ksnapd"); + if (!ksnapd) { + DMERR("Failed to create ksnapd workqueue."); + r = -ENOMEM; + goto bad6; + } + return 0; + bad6: + mempool_destroy(pending_pool); bad5: kmem_cache_destroy(pending_cache); bad4: @@ -1294,6 +1299,8 @@ static void __exit dm_snapshot_exit(void) { int r; + destroy_workqueue(ksnapd); + r = dm_unregister_target(&snapshot_target); if (r) DMERR("snapshot unregister failed %d", r); diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h index fdec1e2dc87..15fa2ae6cdc 100644 --- a/drivers/md/dm-snap.h +++ b/drivers/md/dm-snap.h @@ -10,7 +10,9 @@ #define DM_SNAPSHOT_H #include "dm.h" +#include "dm-bio-list.h" #include <linux/blkdev.h> +#include <linux/workqueue.h> struct exception_table { uint32_t hash_mask; @@ -112,10 +114,20 @@ struct dm_snapshot { struct exception_table pending; struct exception_table complete; + /* + * pe_lock protects all pending_exception operations and access + * as well as the snapshot_bios list. + */ + spinlock_t pe_lock; + /* The on disk metadata handler */ struct exception_store store; struct kcopyd_client *kcopyd_client; + + /* Queue of snapshot writes for ksnapd to flush */ + struct bio_list queued_bios; + struct work_struct queued_bios_work; }; /* @@ -128,10 +140,9 @@ int dm_add_exception(struct dm_snapshot *s, chunk_t old, chunk_t new); * Constructor and destructor for the default persistent * store. */ -int dm_create_persistent(struct exception_store *store, uint32_t chunk_size); +int dm_create_persistent(struct exception_store *store); -int dm_create_transient(struct exception_store *store, - struct dm_snapshot *s, int blocksize); +int dm_create_transient(struct exception_store *store); /* * Return the number of sectors in the device. diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 75fe9493e6a..05befa91807 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -522,56 +522,61 @@ static int __table_get_device(struct dm_table *t, struct dm_target *ti, return 0; } - -int dm_get_device(struct dm_target *ti, const char *path, sector_t start, - sector_t len, int mode, struct dm_dev **result) +void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev) { - int r = __table_get_device(ti->table, ti, path, - start, len, mode, result); - if (!r) { - request_queue_t *q = bdev_get_queue((*result)->bdev); - struct io_restrictions *rs = &ti->limits; - - /* - * Combine the device limits low. - * - * FIXME: if we move an io_restriction struct - * into q this would just be a call to - * combine_restrictions_low() - */ + request_queue_t *q = bdev_get_queue(bdev); + struct io_restrictions *rs = &ti->limits; + + /* + * Combine the device limits low. + * + * FIXME: if we move an io_restriction struct + * into q this would just be a call to + * combine_restrictions_low() + */ + rs->max_sectors = + min_not_zero(rs->max_sectors, q->max_sectors); + + /* FIXME: Device-Mapper on top of RAID-0 breaks because DM + * currently doesn't honor MD's merge_bvec_fn routine. + * In this case, we'll force DM to use PAGE_SIZE or + * smaller I/O, just to be safe. A better fix is in the + * works, but add this for the time being so it will at + * least operate correctly. + */ + if (q->merge_bvec_fn) rs->max_sectors = - min_not_zero(rs->max_sectors, q->max_sectors); + min_not_zero(rs->max_sectors, + (unsigned int) (PAGE_SIZE >> 9)); - /* FIXME: Device-Mapper on top of RAID-0 breaks because DM - * currently doesn't honor MD's merge_bvec_fn routine. - * In this case, we'll force DM to use PAGE_SIZE or - * smaller I/O, just to be safe. A better fix is in the - * works, but add this for the time being so it will at - * least operate correctly. - */ - if (q->merge_bvec_fn) - rs->max_sectors = - min_not_zero(rs->max_sectors, - (unsigned int) (PAGE_SIZE >> 9)); + rs->max_phys_segments = + min_not_zero(rs->max_phys_segments, + q->max_phys_segments); - rs->max_phys_segments = - min_not_zero(rs->max_phys_segments, - q->max_phys_segments); + rs->max_hw_segments = + min_not_zero(rs->max_hw_segments, q->max_hw_segments); - rs->max_hw_segments = - min_not_zero(rs->max_hw_segments, q->max_hw_segments); + rs->hardsect_size = max(rs->hardsect_size, q->hardsect_size); - rs->hardsect_size = max(rs->hardsect_size, q->hardsect_size); + rs->max_segment_size = + min_not_zero(rs->max_segment_size, q->max_segment_size); - rs->max_segment_size = - min_not_zero(rs->max_segment_size, q->max_segment_size); + rs->seg_boundary_mask = + min_not_zero(rs->seg_boundary_mask, + q->seg_boundary_mask); - rs->seg_boundary_mask = - min_not_zero(rs->seg_boundary_mask, - q->seg_boundary_mask); + rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); +} +EXPORT_SYMBOL_GPL(dm_set_device_limits); - rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); - } +int dm_get_device(struct dm_target *ti, const char *path, sector_t start, + sector_t len, int mode, struct dm_dev **result) +{ + int r = __table_get_device(ti->table, ti, path, + start, len, mode, result); + + if (!r) + dm_set_device_limits(ti, (*result)->bdev); return r; } @@ -939,9 +944,20 @@ void dm_table_postsuspend_targets(struct dm_table *t) return suspend_targets(t, 1); } -void dm_table_resume_targets(struct dm_table *t) +int dm_table_resume_targets(struct dm_table *t) { - int i; + int i, r = 0; + + for (i = 0; i < t->num_targets; i++) { + struct dm_target *ti = t->targets + i; + + if (!ti->type->preresume) + continue; + + r = ti->type->preresume(ti); + if (r) + return r; + } for (i = 0; i < t->num_targets; i++) { struct dm_target *ti = t->targets + i; @@ -949,6 +965,8 @@ void dm_table_resume_targets(struct dm_table *t) if (ti->type->resume) ti->type->resume(ti); } + + return 0; } int dm_table_any_congested(struct dm_table *t, int bdi_bits) @@ -983,6 +1001,11 @@ int dm_table_flush_all(struct dm_table *t) { struct list_head *d, *devices = dm_table_get_devices(t); int ret = 0; + unsigned i; + + for (i = 0; i < t->num_targets; i++) + if (t->targets[i].type->flush) + t->targets[i].type->flush(&t->targets[i]); for (d = devices->next; d != devices; d = d->next) { struct dm_dev *dd = list_entry(d, struct dm_dev, list); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index c99bf9f0175..b5764a86c8b 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -20,6 +20,7 @@ #include <linux/idr.h> #include <linux/hdreg.h> #include <linux/blktrace_api.h> +#include <linux/smp_lock.h> #define DM_MSG_PREFIX "core" @@ -101,6 +102,8 @@ struct mapped_device { mempool_t *io_pool; mempool_t *tio_pool; + struct bio_set *bs; + /* * Event handling. */ @@ -121,16 +124,10 @@ struct mapped_device { static kmem_cache_t *_io_cache; static kmem_cache_t *_tio_cache; -static struct bio_set *dm_set; - static int __init local_init(void) { int r; - dm_set = bioset_create(16, 16, 4); - if (!dm_set) - return -ENOMEM; - /* allocate a slab for the dm_ios */ _io_cache = kmem_cache_create("dm_io", sizeof(struct dm_io), 0, 0, NULL, NULL); @@ -164,8 +161,6 @@ static void local_exit(void) kmem_cache_destroy(_tio_cache); kmem_cache_destroy(_io_cache); - bioset_free(dm_set); - if (unregister_blkdev(_major, _name) < 0) DMERR("unregister_blkdev failed"); @@ -288,6 +283,45 @@ static int dm_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) return dm_get_geometry(md, geo); } +static int dm_blk_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mapped_device *md; + struct dm_table *map; + struct dm_target *tgt; + int r = -ENOTTY; + + /* We don't really need this lock, but we do need 'inode'. */ + unlock_kernel(); + + md = inode->i_bdev->bd_disk->private_data; + + map = dm_get_table(md); + + if (!map || !dm_table_get_size(map)) + goto out; + + /* We only support devices that have a single target */ + if (dm_table_get_num_targets(map) != 1) + goto out; + + tgt = dm_table_get_target(map, 0); + + if (dm_suspended(md)) { + r = -EAGAIN; + goto out; + } + + if (tgt->type->ioctl) + r = tgt->type->ioctl(tgt, inode, file, cmd, arg); + +out: + dm_table_put(map); + + lock_kernel(); + return r; +} + static inline struct dm_io *alloc_io(struct mapped_device *md) { return mempool_alloc(md->io_pool, GFP_NOIO); @@ -435,7 +469,7 @@ static int clone_endio(struct bio *bio, unsigned int done, int error) { int r = 0; struct target_io *tio = bio->bi_private; - struct dm_io *io = tio->io; + struct mapped_device *md = tio->io->md; dm_endio_fn endio = tio->ti->type->end_io; if (bio->bi_size) @@ -454,9 +488,15 @@ static int clone_endio(struct bio *bio, unsigned int done, int error) return 1; } - free_tio(io->md, tio); - dec_pending(io, error); + dec_pending(tio->io, error); + + /* + * Store md for cleanup instead of tio which is about to get freed. + */ + bio->bi_private = md->bs; + bio_put(bio); + free_tio(md, tio); return r; } @@ -485,6 +525,7 @@ static void __map_bio(struct dm_target *ti, struct bio *clone, { int r; sector_t sector; + struct mapped_device *md; /* * Sanity checks. @@ -514,10 +555,14 @@ static void __map_bio(struct dm_target *ti, struct bio *clone, else if (r < 0) { /* error the io and bail out */ - struct dm_io *io = tio->io; - free_tio(tio->io->md, tio); - dec_pending(io, r); + md = tio->io->md; + dec_pending(tio->io, r); + /* + * Store bio_set for cleanup. + */ + clone->bi_private = md->bs; bio_put(clone); + free_tio(md, tio); } } @@ -533,7 +578,9 @@ struct clone_info { static void dm_bio_destructor(struct bio *bio) { - bio_free(bio, dm_set); + struct bio_set *bs = bio->bi_private; + + bio_free(bio, bs); } /* @@ -541,12 +588,12 @@ static void dm_bio_destructor(struct bio *bio) */ static struct bio *split_bvec(struct bio *bio, sector_t sector, unsigned short idx, unsigned int offset, - unsigned int len) + unsigned int len, struct bio_set *bs) { struct bio *clone; struct bio_vec *bv = bio->bi_io_vec + idx; - clone = bio_alloc_bioset(GFP_NOIO, 1, dm_set); + clone = bio_alloc_bioset(GFP_NOIO, 1, bs); clone->bi_destructor = dm_bio_destructor; *clone->bi_io_vec = *bv; @@ -566,11 +613,13 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, */ static struct bio *clone_bio(struct bio *bio, sector_t sector, unsigned short idx, unsigned short bv_count, - unsigned int len) + unsigned int len, struct bio_set *bs) { struct bio *clone; - clone = bio_clone(bio, GFP_NOIO); + clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs); + __bio_clone(clone, bio); + clone->bi_destructor = dm_bio_destructor; clone->bi_sector = sector; clone->bi_idx = idx; clone->bi_vcnt = idx + bv_count; @@ -601,7 +650,8 @@ static void __clone_and_map(struct clone_info *ci) * the remaining io with a single clone. */ clone = clone_bio(bio, ci->sector, ci->idx, - bio->bi_vcnt - ci->idx, ci->sector_count); + bio->bi_vcnt - ci->idx, ci->sector_count, + ci->md->bs); __map_bio(ti, clone, tio); ci->sector_count = 0; @@ -624,7 +674,8 @@ static void __clone_and_map(struct clone_info *ci) len += bv_len; } - clone = clone_bio(bio, ci->sector, ci->idx, i - ci->idx, len); + clone = clone_bio(bio, ci->sector, ci->idx, i - ci->idx, len, + ci->md->bs); __map_bio(ti, clone, tio); ci->sector += len; @@ -653,7 +704,8 @@ static void __clone_and_map(struct clone_info *ci) len = min(remaining, max); clone = split_bvec(bio, ci->sector, ci->idx, - bv->bv_offset + offset, len); + bv->bv_offset + offset, len, + ci->md->bs); __map_bio(ti, clone, tio); @@ -903,7 +955,7 @@ static struct mapped_device *alloc_dev(int minor) md->queue = blk_alloc_queue(GFP_KERNEL); if (!md->queue) - goto bad1; + goto bad1_free_minor; md->queue->queuedata = md; md->queue->backing_dev_info.congested_fn = dm_any_congested; @@ -921,6 +973,10 @@ static struct mapped_device *alloc_dev(int minor) if (!md->tio_pool) goto bad3; + md->bs = bioset_create(16, 16, 4); + if (!md->bs) + goto bad_no_bioset; + md->disk = alloc_disk(1); if (!md->disk) goto bad4; @@ -948,11 +1004,14 @@ static struct mapped_device *alloc_dev(int minor) return md; bad4: + bioset_free(md->bs); + bad_no_bioset: mempool_destroy(md->tio_pool); bad3: mempool_destroy(md->io_pool); bad2: blk_cleanup_queue(md->queue); + bad1_free_minor: free_minor(minor); bad1: module_put(THIS_MODULE); @@ -971,6 +1030,7 @@ static void free_dev(struct mapped_device *md) } mempool_destroy(md->tio_pool); mempool_destroy(md->io_pool); + bioset_free(md->bs); del_gendisk(md->disk); free_minor(minor); @@ -1319,7 +1379,9 @@ int dm_resume(struct mapped_device *md) if (!map || !dm_table_get_size(map)) goto out; - dm_table_resume_targets(map); + r = dm_table_resume_targets(map); + if (r) + goto out; down_write(&md->io_lock); clear_bit(DMF_BLOCK_IO, &md->flags); @@ -1337,6 +1399,8 @@ int dm_resume(struct mapped_device *md) dm_table_unplug_all(map); + kobject_uevent(&md->disk->kobj, KOBJ_CHANGE); + r = 0; out: @@ -1377,6 +1441,7 @@ int dm_suspended(struct mapped_device *md) static struct block_device_operations dm_blk_dops = { .open = dm_blk_open, .release = dm_blk_close, + .ioctl = dm_blk_ioctl, .getgeo = dm_blk_getgeo, .owner = THIS_MODULE }; diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 3c03c0ecab7..a48ec5e3c1f 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -21,6 +21,11 @@ #define DMERR(f, arg...) printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg) #define DMWARN(f, arg...) printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg) #define DMINFO(f, arg...) printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg) +#ifdef CONFIG_DM_DEBUG +# define DMDEBUG(f, arg...) printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX " DEBUG: " f "\n", ## arg) +#else +# define DMDEBUG(f, arg...) do {} while (0) +#endif #define DMEMIT(x...) sz += ((sz >= maxlen) ? \ 0 : scnprintf(result + sz, maxlen - sz, x)) @@ -52,7 +57,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q); struct list_head *dm_table_get_devices(struct dm_table *t); void dm_table_presuspend_targets(struct dm_table *t); void dm_table_postsuspend_targets(struct dm_table *t); -void dm_table_resume_targets(struct dm_table *t); +int dm_table_resume_targets(struct dm_table *t); int dm_table_any_congested(struct dm_table *t, int bdi_bits); void dm_table_unplug_all(struct dm_table *t); int dm_table_flush_all(struct dm_table *t); diff --git a/drivers/md/linear.c b/drivers/md/linear.c index b99c19c7eb2..c625ddb8833 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -111,6 +111,19 @@ static int linear_issue_flush(request_queue_t *q, struct gendisk *disk, return ret; } +static int linear_congested(void *data, int bits) +{ + mddev_t *mddev = data; + linear_conf_t *conf = mddev_to_conf(mddev); + int i, ret = 0; + + for (i = 0; i < mddev->raid_disks && !ret ; i++) { + request_queue_t *q = bdev_get_queue(conf->disks[i].rdev->bdev); + ret |= bdi_congested(&q->backing_dev_info, bits); + } + return ret; +} + static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) { linear_conf_t *conf; @@ -269,6 +282,8 @@ static int linear_run (mddev_t *mddev) blk_queue_merge_bvec(mddev->queue, linear_mergeable_bvec); mddev->queue->unplug_fn = linear_unplug; mddev->queue->issue_flush_fn = linear_issue_flush; + mddev->queue->backing_dev_info.congested_fn = linear_congested; + mddev->queue->backing_dev_info.congested_data = mddev; return 0; } diff --git a/drivers/md/md.c b/drivers/md/md.c index 8dbab2ef388..38a0a5741d5 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -389,8 +389,12 @@ static int super_written(struct bio *bio, unsigned int bytes_done, int error) if (bio->bi_size) return 1; - if (error || !test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (error || !test_bit(BIO_UPTODATE, &bio->bi_flags)) { + printk("md: super_written gets error=%d, uptodate=%d\n", + error, test_bit(BIO_UPTODATE, &bio->bi_flags)); + WARN_ON(test_bit(BIO_UPTODATE, &bio->bi_flags)); md_error(mddev, rdev); + } if (atomic_dec_and_test(&mddev->pending_writes)) wake_up(&mddev->sb_wait); @@ -1587,7 +1591,7 @@ static void sync_sbs(mddev_t * mddev, int nospares) } } -void md_update_sb(mddev_t * mddev) +static void md_update_sb(mddev_t * mddev, int force_change) { int err; struct list_head *tmp; @@ -1598,7 +1602,18 @@ void md_update_sb(mddev_t * mddev) repeat: spin_lock_irq(&mddev->write_lock); - if (mddev->degraded && mddev->sb_dirty == 3) + set_bit(MD_CHANGE_PENDING, &mddev->flags); + if (test_and_clear_bit(MD_CHANGE_DEVS, &mddev->flags)) + force_change = 1; + if (test_and_clear_bit(MD_CHANGE_CLEAN, &mddev->flags)) + /* just a clean<-> dirty transition, possibly leave spares alone, + * though if events isn't the right even/odd, we will have to do + * spares after all + */ + nospares = 1; + if (force_change) + nospares = 0; + if (mddev->degraded) /* If the array is degraded, then skipping spares is both * dangerous and fairly pointless. * Dangerous because a device that was removed from the array @@ -1608,20 +1623,14 @@ repeat: * then a recovery will happen and soon that array won't * be degraded any more and the spare can go back to sleep then. */ - mddev->sb_dirty = 1; + nospares = 0; sync_req = mddev->in_sync; mddev->utime = get_seconds(); - if (mddev->sb_dirty == 3) - /* just a clean<-> dirty transition, possibly leave spares alone, - * though if events isn't the right even/odd, we will have to do - * spares after all - */ - nospares = 1; /* If this is just a dirty<->clean transition, and the array is clean * and 'events' is odd, we can roll back to the previous clean state */ - if (mddev->sb_dirty == 3 + if (nospares && (mddev->in_sync && mddev->recovery_cp == MaxSector) && (mddev->events & 1)) mddev->events--; @@ -1652,7 +1661,6 @@ repeat: MD_BUG(); mddev->events --; } - mddev->sb_dirty = 2; sync_sbs(mddev, nospares); /* @@ -1660,7 +1668,7 @@ repeat: * nonpersistent superblocks */ if (!mddev->persistent) { - mddev->sb_dirty = 0; + clear_bit(MD_CHANGE_PENDING, &mddev->flags); spin_unlock_irq(&mddev->write_lock); wake_up(&mddev->sb_wait); return; @@ -1697,20 +1705,20 @@ repeat: break; } md_super_wait(mddev); - /* if there was a failure, sb_dirty was set to 1, and we re-write super */ + /* if there was a failure, MD_CHANGE_DEVS was set, and we re-write super */ spin_lock_irq(&mddev->write_lock); - if (mddev->in_sync != sync_req|| mddev->sb_dirty == 1) { + if (mddev->in_sync != sync_req || + test_bit(MD_CHANGE_DEVS, &mddev->flags)) { /* have to write it out again */ spin_unlock_irq(&mddev->write_lock); goto repeat; } - mddev->sb_dirty = 0; + clear_bit(MD_CHANGE_PENDING, &mddev->flags); spin_unlock_irq(&mddev->write_lock); wake_up(&mddev->sb_wait); } -EXPORT_SYMBOL_GPL(md_update_sb); /* words written to sysfs files may, or my not, be \n terminated. * We want to accept with case. For this we use cmd_match. @@ -1783,7 +1791,7 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len) else { mddev_t *mddev = rdev->mddev; kick_rdev_from_array(rdev); - md_update_sb(mddev); + md_update_sb(mddev, 1); md_new_event(mddev); err = 0; } @@ -2426,7 +2434,7 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len) spin_lock_irq(&mddev->write_lock); if (atomic_read(&mddev->writes_pending) == 0) { mddev->in_sync = 1; - mddev->sb_dirty = 1; + set_bit(MD_CHANGE_CLEAN, &mddev->flags); } spin_unlock_irq(&mddev->write_lock); } else { @@ -2438,7 +2446,7 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len) case active: if (mddev->pers) { restart_array(mddev); - mddev->sb_dirty = 0; + clear_bit(MD_CHANGE_CLEAN, &mddev->flags); wake_up(&mddev->sb_wait); err = 0; } else { @@ -2520,6 +2528,36 @@ static struct md_sysfs_entry md_new_device = __ATTR(new_dev, S_IWUSR, null_show, new_dev_store); static ssize_t +bitmap_store(mddev_t *mddev, const char *buf, size_t len) +{ + char *end; + unsigned long chunk, end_chunk; + + if (!mddev->bitmap) + goto out; + /* buf should be <chunk> <chunk> ... or <chunk>-<chunk> ... (range) */ + while (*buf) { + chunk = end_chunk = simple_strtoul(buf, &end, 0); + if (buf == end) break; + if (*end == '-') { /* range */ + buf = end + 1; + end_chunk = simple_strtoul(buf, &end, 0); + if (buf == end) break; + } + if (*end && !isspace(*end)) break; + bitmap_dirty_bits(mddev->bitmap, chunk, end_chunk); + buf = end; + while (isspace(*buf)) buf++; + } + bitmap_unplug(mddev->bitmap); /* flush the bits to disk */ +out: + return len; +} + +static struct md_sysfs_entry md_bitmap = +__ATTR(bitmap_set_bits, S_IWUSR, null_show, bitmap_store); + +static ssize_t size_show(mddev_t *mddev, char *page) { return sprintf(page, "%llu\n", (unsigned long long)mddev->size); @@ -2543,7 +2581,7 @@ size_store(mddev_t *mddev, const char *buf, size_t len) if (mddev->pers) { err = update_size(mddev, size); - md_update_sb(mddev); + md_update_sb(mddev, 1); } else { if (mddev->size == 0 || mddev->size > size) @@ -2839,6 +2877,7 @@ static struct attribute *md_redundancy_attrs[] = { &md_sync_completed.attr, &md_suspend_lo.attr, &md_suspend_hi.attr, + &md_bitmap.attr, NULL, }; static struct attribute_group md_redundancy_group = { @@ -3111,8 +3150,8 @@ static int do_md_run(mddev_t * mddev) set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - if (mddev->sb_dirty) - md_update_sb(mddev); + if (mddev->flags) + md_update_sb(mddev, 0); set_capacity(disk, mddev->array_size<<1); @@ -3275,10 +3314,10 @@ static int do_md_stop(mddev_t * mddev, int mode) if (mddev->ro) mddev->ro = 0; } - if (!mddev->in_sync || mddev->sb_dirty) { + if (!mddev->in_sync || mddev->flags) { /* mark array as shutdown cleanly */ mddev->in_sync = 1; - md_update_sb(mddev); + md_update_sb(mddev, 1); } if (mode == 1) set_disk_ro(disk, 1); @@ -3374,6 +3413,7 @@ static void autorun_devices(int part) printk(KERN_INFO "md: autorun ...\n"); while (!list_empty(&pending_raid_disks)) { + int unit; dev_t dev; LIST_HEAD(candidates); rdev0 = list_entry(pending_raid_disks.next, @@ -3393,16 +3433,19 @@ static void autorun_devices(int part) * mostly sane superblocks. It's time to allocate the * mddev. */ - if (rdev0->preferred_minor < 0 || rdev0->preferred_minor >= MAX_MD_DEVS) { + if (part) { + dev = MKDEV(mdp_major, + rdev0->preferred_minor << MdpMinorShift); + unit = MINOR(dev) >> MdpMinorShift; + } else { + dev = MKDEV(MD_MAJOR, rdev0->preferred_minor); + unit = MINOR(dev); + } + if (rdev0->preferred_minor != unit) { printk(KERN_INFO "md: unit number in %s is bad: %d\n", bdevname(rdev0->bdev, b), rdev0->preferred_minor); break; } - if (part) - dev = MKDEV(mdp_major, - rdev0->preferred_minor << MdpMinorShift); - else - dev = MKDEV(MD_MAJOR, rdev0->preferred_minor); md_probe(dev, NULL, NULL); mddev = mddev_find(dev); @@ -3440,67 +3483,6 @@ static void autorun_devices(int part) printk(KERN_INFO "md: ... autorun DONE.\n"); } -/* - * import RAID devices based on one partition - * if possible, the array gets run as well. - */ - -static int autostart_array(dev_t startdev) -{ - char b[BDEVNAME_SIZE]; - int err = -EINVAL, i; - mdp_super_t *sb = NULL; - mdk_rdev_t *start_rdev = NULL, *rdev; - - start_rdev = md_import_device(startdev, 0, 0); - if (IS_ERR(start_rdev)) - return err; - - - /* NOTE: this can only work for 0.90.0 superblocks */ - sb = (mdp_super_t*)page_address(start_rdev->sb_page); - if (sb->major_version != 0 || - sb->minor_version != 90 ) { - printk(KERN_WARNING "md: can only autostart 0.90.0 arrays\n"); - export_rdev(start_rdev); - return err; - } - - if (test_bit(Faulty, &start_rdev->flags)) { - printk(KERN_WARNING - "md: can not autostart based on faulty %s!\n", - bdevname(start_rdev->bdev,b)); - export_rdev(start_rdev); - return err; - } - list_add(&start_rdev->same_set, &pending_raid_disks); - - for (i = 0; i < MD_SB_DISKS; i++) { - mdp_disk_t *desc = sb->disks + i; - dev_t dev = MKDEV(desc->major, desc->minor); - - if (!dev) - continue; - if (dev == startdev) - continue; - if (MAJOR(dev) != desc->major || MINOR(dev) != desc->minor) - continue; - rdev = md_import_device(dev, 0, 0); - if (IS_ERR(rdev)) - continue; - - list_add(&rdev->same_set, &pending_raid_disks); - } - - /* - * possibly return codes - */ - autorun_devices(0); - return 0; - -} - - static int get_version(void __user * arg) { mdu_version_t ver; @@ -3808,7 +3790,7 @@ static int hot_remove_disk(mddev_t * mddev, dev_t dev) goto busy; kick_rdev_from_array(rdev); - md_update_sb(mddev); + md_update_sb(mddev, 1); md_new_event(mddev); return 0; @@ -3885,7 +3867,7 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) rdev->raid_disk = -1; - md_update_sb(mddev); + md_update_sb(mddev, 1); /* * Kick recovery, maybe this spare has to be added to the @@ -4016,7 +3998,8 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info) mddev->max_disks = MD_SB_DISKS; - mddev->sb_dirty = 1; + mddev->flags = 0; + set_bit(MD_CHANGE_DEVS, &mddev->flags); mddev->default_bitmap_offset = MD_SB_BYTES >> 9; mddev->bitmap_offset = 0; @@ -4185,7 +4168,7 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info) mddev->bitmap_offset = 0; } } - md_update_sb(mddev); + md_update_sb(mddev, 1); return rv; } @@ -4259,27 +4242,6 @@ static int md_ioctl(struct inode *inode, struct file *file, goto abort; } - - if (cmd == START_ARRAY) { - /* START_ARRAY doesn't need to lock the array as autostart_array - * does the locking, and it could even be a different array - */ - static int cnt = 3; - if (cnt > 0 ) { - printk(KERN_WARNING - "md: %s(pid %d) used deprecated START_ARRAY ioctl. " - "This will not be supported beyond July 2006\n", - current->comm, current->pid); - cnt--; - } - err = autostart_array(new_decode_dev(arg)); - if (err) { - printk(KERN_WARNING "md: autostart failed!\n"); - goto abort; - } - goto done; - } - err = mddev_lock(mddev); if (err) { printk(KERN_INFO @@ -4687,9 +4649,11 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev) seq_printf(seq, " %s =%3u.%u%% (%llu/%llu)", (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)? "reshape" : - (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ? - "resync" : "recovery")), - per_milli/10, per_milli % 10, + (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)? + "check" : + (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ? + "resync" : "recovery"))), + per_milli/10, per_milli % 10, (unsigned long long) resync, (unsigned long long) max_blocks); @@ -5042,12 +5006,12 @@ void md_write_start(mddev_t *mddev, struct bio *bi) spin_lock_irq(&mddev->write_lock); if (mddev->in_sync) { mddev->in_sync = 0; - mddev->sb_dirty = 3; + set_bit(MD_CHANGE_CLEAN, &mddev->flags); md_wakeup_thread(mddev->thread); } spin_unlock_irq(&mddev->write_lock); } - wait_event(mddev->sb_wait, mddev->sb_dirty==0); + wait_event(mddev->sb_wait, mddev->flags==0); } void md_write_end(mddev_t *mddev) @@ -5078,6 +5042,7 @@ void md_do_sync(mddev_t *mddev) int skipped = 0; struct list_head *rtmp; mdk_rdev_t *rdev; + char *desc; /* just incase thread restarts... */ if (test_bit(MD_RECOVERY_DONE, &mddev->recovery)) @@ -5085,6 +5050,18 @@ void md_do_sync(mddev_t *mddev) if (mddev->ro) /* never try to sync a read-only array */ return; + if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { + if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)) + desc = "data-check"; + else if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) + desc = "requested-resync"; + else + desc = "resync"; + } else if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) + desc = "reshape"; + else + desc = "recovery"; + /* we overload curr_resync somewhat here. * 0 == not engaged in resync at all * 2 == checking that there is no conflict with another sync @@ -5128,10 +5105,10 @@ void md_do_sync(mddev_t *mddev) prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE); if (!kthread_should_stop() && mddev2->curr_resync >= mddev->curr_resync) { - printk(KERN_INFO "md: delaying resync of %s" - " until %s has finished resync (they" + printk(KERN_INFO "md: delaying %s of %s" + " until %s has finished (they" " share one or more physical units)\n", - mdname(mddev), mdname(mddev2)); + desc, mdname(mddev), mdname(mddev2)); mddev_put(mddev2); schedule(); finish_wait(&resync_wait, &wq); @@ -5167,12 +5144,12 @@ void md_do_sync(mddev_t *mddev) j = rdev->recovery_offset; } - printk(KERN_INFO "md: syncing RAID array %s\n", mdname(mddev)); - printk(KERN_INFO "md: minimum _guaranteed_ reconstruction speed:" - " %d KB/sec/disc.\n", speed_min(mddev)); + printk(KERN_INFO "md: %s of RAID array %s\n", desc, mdname(mddev)); + printk(KERN_INFO "md: minimum _guaranteed_ speed:" + " %d KB/sec/disk.\n", speed_min(mddev)); printk(KERN_INFO "md: using maximum available idle IO bandwidth " - "(but not more than %d KB/sec) for reconstruction.\n", - speed_max(mddev)); + "(but not more than %d KB/sec) for %s.\n", + speed_max(mddev), desc); is_mddev_idle(mddev); /* this also initializes IO event counters */ @@ -5198,8 +5175,8 @@ void md_do_sync(mddev_t *mddev) if (j>2) { printk(KERN_INFO - "md: resuming recovery of %s from checkpoint.\n", - mdname(mddev)); + "md: resuming %s of %s from checkpoint.\n", + desc, mdname(mddev)); mddev->curr_resync = j; } @@ -5282,7 +5259,7 @@ void md_do_sync(mddev_t *mddev) } } } - printk(KERN_INFO "md: %s: sync done.\n",mdname(mddev)); + printk(KERN_INFO "md: %s: %s done.\n",mdname(mddev), desc); /* * this also signals 'finished resyncing' to md_stop */ @@ -5302,8 +5279,8 @@ void md_do_sync(mddev_t *mddev) if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { if (mddev->curr_resync >= mddev->recovery_cp) { printk(KERN_INFO - "md: checkpointing recovery of %s.\n", - mdname(mddev)); + "md: checkpointing %s of %s.\n", + desc, mdname(mddev)); mddev->recovery_cp = mddev->curr_resync; } } else @@ -5317,7 +5294,6 @@ void md_do_sync(mddev_t *mddev) !test_bit(In_sync, &rdev->flags) && rdev->recovery_offset < mddev->curr_resync) rdev->recovery_offset = mddev->curr_resync; - mddev->sb_dirty = 1; } } @@ -5374,7 +5350,7 @@ void md_check_recovery(mddev_t *mddev) } if ( ! ( - mddev->sb_dirty || + mddev->flags || test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) || test_bit(MD_RECOVERY_DONE, &mddev->recovery) || (mddev->safemode == 1) || @@ -5390,14 +5366,14 @@ void md_check_recovery(mddev_t *mddev) if (mddev->safemode && !atomic_read(&mddev->writes_pending) && !mddev->in_sync && mddev->recovery_cp == MaxSector) { mddev->in_sync = 1; - mddev->sb_dirty = 3; + set_bit(MD_CHANGE_CLEAN, &mddev->flags); } if (mddev->safemode == 1) mddev->safemode = 0; spin_unlock_irq(&mddev->write_lock); - if (mddev->sb_dirty) - md_update_sb(mddev); + if (mddev->flags) + md_update_sb(mddev, 0); if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) && @@ -5416,7 +5392,7 @@ void md_check_recovery(mddev_t *mddev) /* activate any spares */ mddev->pers->spare_active(mddev); } - md_update_sb(mddev); + md_update_sb(mddev, 1); /* if array is no-longer degraded, then any saved_raid_disk * information must be scrapped @@ -5556,22 +5532,15 @@ static void md_geninit(void) static int __init md_init(void) { - printk(KERN_INFO "md: md driver %d.%d.%d MAX_MD_DEVS=%d," - " MD_SB_DISKS=%d\n", - MD_MAJOR_VERSION, MD_MINOR_VERSION, - MD_PATCHLEVEL_VERSION, MAX_MD_DEVS, MD_SB_DISKS); - printk(KERN_INFO "md: bitmap version %d.%d\n", BITMAP_MAJOR_HI, - BITMAP_MINOR); - if (register_blkdev(MAJOR_NR, "md")) return -1; if ((mdp_major=register_blkdev(0, "mdp"))<=0) { unregister_blkdev(MAJOR_NR, "md"); return -1; } - blk_register_region(MKDEV(MAJOR_NR, 0), MAX_MD_DEVS, THIS_MODULE, - md_probe, NULL, NULL); - blk_register_region(MKDEV(mdp_major, 0), MAX_MD_DEVS<<MdpMinorShift, THIS_MODULE, + blk_register_region(MKDEV(MAJOR_NR, 0), 1UL<<MINORBITS, THIS_MODULE, + md_probe, NULL, NULL); + blk_register_region(MKDEV(mdp_major, 0), 1UL<<MINORBITS, THIS_MODULE, md_probe, NULL, NULL); register_reboot_notifier(&md_notifier); @@ -5630,8 +5599,8 @@ static __exit void md_exit(void) mddev_t *mddev; struct list_head *tmp; - blk_unregister_region(MKDEV(MAJOR_NR,0), MAX_MD_DEVS); - blk_unregister_region(MKDEV(mdp_major,0), MAX_MD_DEVS << MdpMinorShift); + blk_unregister_region(MKDEV(MAJOR_NR,0), 1U << MINORBITS); + blk_unregister_region(MKDEV(mdp_major,0), 1U << MINORBITS); unregister_blkdev(MAJOR_NR,"md"); unregister_blkdev(mdp_major, "mdp"); diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 1cc9de44ce8..171ff41b52b 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -228,6 +228,28 @@ static int multipath_issue_flush(request_queue_t *q, struct gendisk *disk, rcu_read_unlock(); return ret; } +static int multipath_congested(void *data, int bits) +{ + mddev_t *mddev = data; + multipath_conf_t *conf = mddev_to_conf(mddev); + int i, ret = 0; + + rcu_read_lock(); + for (i = 0; i < mddev->raid_disks ; i++) { + mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev); + if (rdev && !test_bit(Faulty, &rdev->flags)) { + request_queue_t *q = bdev_get_queue(rdev->bdev); + + ret |= bdi_congested(&q->backing_dev_info, bits); + /* Just like multipath_map, we just check the + * first available device + */ + break; + } + } + rcu_read_unlock(); + return ret; +} /* * Careful, this can execute in IRQ contexts as well! @@ -253,7 +275,7 @@ static void multipath_error (mddev_t *mddev, mdk_rdev_t *rdev) char b[BDEVNAME_SIZE]; clear_bit(In_sync, &rdev->flags); set_bit(Faulty, &rdev->flags); - mddev->sb_dirty = 1; + set_bit(MD_CHANGE_DEVS, &mddev->flags); conf->working_disks--; printk(KERN_ALERT "multipath: IO failure on %s," " disabling IO path. \n Operation continuing" @@ -470,7 +492,6 @@ static int multipath_run (mddev_t *mddev) } conf->raid_disks = mddev->raid_disks; - mddev->sb_dirty = 1; conf->mddev = mddev; spin_lock_init(&conf->device_lock); INIT_LIST_HEAD(&conf->retry_list); @@ -510,6 +531,8 @@ static int multipath_run (mddev_t *mddev) mddev->queue->unplug_fn = multipath_unplug; mddev->queue->issue_flush_fn = multipath_issue_flush; + mddev->queue->backing_dev_info.congested_fn = multipath_congested; + mddev->queue->backing_dev_info.congested_data = mddev; return 0; diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index cb8c6317e4e..dfe32149ad3 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -60,6 +60,21 @@ static int raid0_issue_flush(request_queue_t *q, struct gendisk *disk, return ret; } +static int raid0_congested(void *data, int bits) +{ + mddev_t *mddev = data; + raid0_conf_t *conf = mddev_to_conf(mddev); + mdk_rdev_t **devlist = conf->strip_zone[0].dev; + int i, ret = 0; + + for (i = 0; i < mddev->raid_disks && !ret ; i++) { + request_queue_t *q = bdev_get_queue(devlist[i]->bdev); + + ret |= bdi_congested(&q->backing_dev_info, bits); + } + return ret; +} + static int create_strip_zones (mddev_t *mddev) { @@ -236,6 +251,8 @@ static int create_strip_zones (mddev_t *mddev) mddev->queue->unplug_fn = raid0_unplug; mddev->queue->issue_flush_fn = raid0_issue_flush; + mddev->queue->backing_dev_info.congested_fn = raid0_congested; + mddev->queue->backing_dev_info.congested_data = mddev; printk("raid0: done.\n"); return 0; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 3b4d69c0562..dc9d2def027 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -271,7 +271,7 @@ static int raid1_end_read_request(struct bio *bio, unsigned int bytes_done, int */ update_head_pos(mirror, r1_bio); - if (uptodate || conf->working_disks <= 1) { + if (uptodate || (conf->raid_disks - conf->mddev->degraded) <= 1) { /* * Set R1BIO_Uptodate in our master bio, so that * we will return a good error code for to the higher @@ -601,6 +601,32 @@ static int raid1_issue_flush(request_queue_t *q, struct gendisk *disk, return ret; } +static int raid1_congested(void *data, int bits) +{ + mddev_t *mddev = data; + conf_t *conf = mddev_to_conf(mddev); + int i, ret = 0; + + rcu_read_lock(); + for (i = 0; i < mddev->raid_disks; i++) { + mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); + if (rdev && !test_bit(Faulty, &rdev->flags)) { + request_queue_t *q = bdev_get_queue(rdev->bdev); + + /* Note the '|| 1' - when read_balance prefers + * non-congested targets, it can be removed + */ + if ((bits & (1<<BDI_write_congested)) || 1) + ret |= bdi_congested(&q->backing_dev_info, bits); + else + ret &= bdi_congested(&q->backing_dev_info, bits); + } + } + rcu_read_unlock(); + return ret; +} + + /* Barriers.... * Sometimes we need to suspend IO while we do something else, * either some resync/recovery, or reconfigure the array. @@ -929,7 +955,7 @@ static void status(struct seq_file *seq, mddev_t *mddev) int i; seq_printf(seq, " [%d/%d] [", conf->raid_disks, - conf->working_disks); + conf->raid_disks - mddev->degraded); rcu_read_lock(); for (i = 0; i < conf->raid_disks; i++) { mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); @@ -953,26 +979,27 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) * else mark the drive as failed */ if (test_bit(In_sync, &rdev->flags) - && conf->working_disks == 1) + && (conf->raid_disks - mddev->degraded) == 1) /* * Don't fail the drive, act as though we were just a * normal single drive */ return; - if (test_bit(In_sync, &rdev->flags)) { + if (test_and_clear_bit(In_sync, &rdev->flags)) { + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded++; - conf->working_disks--; + spin_unlock_irqrestore(&conf->device_lock, flags); /* * if recovery is running, make sure it aborts. */ set_bit(MD_RECOVERY_ERR, &mddev->recovery); } - clear_bit(In_sync, &rdev->flags); set_bit(Faulty, &rdev->flags); - mddev->sb_dirty = 1; + set_bit(MD_CHANGE_DEVS, &mddev->flags); printk(KERN_ALERT "raid1: Disk failure on %s, disabling device. \n" " Operation continuing on %d devices\n", - bdevname(rdev->bdev,b), conf->working_disks); + bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded); } static void print_conf(conf_t *conf) @@ -984,7 +1011,7 @@ static void print_conf(conf_t *conf) printk("(!conf)\n"); return; } - printk(" --- wd:%d rd:%d\n", conf->working_disks, + printk(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded, conf->raid_disks); rcu_read_lock(); @@ -1023,10 +1050,11 @@ static int raid1_spare_active(mddev_t *mddev) mdk_rdev_t *rdev = conf->mirrors[i].rdev; if (rdev && !test_bit(Faulty, &rdev->flags) - && !test_bit(In_sync, &rdev->flags)) { - conf->working_disks++; + && !test_and_set_bit(In_sync, &rdev->flags)) { + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded--; - set_bit(In_sync, &rdev->flags); + spin_unlock_irqrestore(&conf->device_lock, flags); } } @@ -1368,6 +1396,95 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) * 3. Performs writes following reads for array syncronising. */ +static void fix_read_error(conf_t *conf, int read_disk, + sector_t sect, int sectors) +{ + mddev_t *mddev = conf->mddev; + while(sectors) { + int s = sectors; + int d = read_disk; + int success = 0; + int start; + mdk_rdev_t *rdev; + + if (s > (PAGE_SIZE>>9)) + s = PAGE_SIZE >> 9; + + do { + /* Note: no rcu protection needed here + * as this is synchronous in the raid1d thread + * which is the thread that might remove + * a device. If raid1d ever becomes multi-threaded.... + */ + rdev = conf->mirrors[d].rdev; + if (rdev && + test_bit(In_sync, &rdev->flags) && + sync_page_io(rdev->bdev, + sect + rdev->data_offset, + s<<9, + conf->tmppage, READ)) + success = 1; + else { + d++; + if (d == conf->raid_disks) + d = 0; + } + } while (!success && d != read_disk); + + if (!success) { + /* Cannot read from anywhere -- bye bye array */ + md_error(mddev, conf->mirrors[read_disk].rdev); + break; + } + /* write it back and re-read */ + start = d; + while (d != read_disk) { + if (d==0) + d = conf->raid_disks; + d--; + rdev = conf->mirrors[d].rdev; + if (rdev && + test_bit(In_sync, &rdev->flags)) { + if (sync_page_io(rdev->bdev, + sect + rdev->data_offset, + s<<9, conf->tmppage, WRITE) + == 0) + /* Well, this device is dead */ + md_error(mddev, rdev); + } + } + d = start; + while (d != read_disk) { + char b[BDEVNAME_SIZE]; + if (d==0) + d = conf->raid_disks; + d--; + rdev = conf->mirrors[d].rdev; + if (rdev && + test_bit(In_sync, &rdev->flags)) { + if (sync_page_io(rdev->bdev, + sect + rdev->data_offset, + s<<9, conf->tmppage, READ) + == 0) + /* Well, this device is dead */ + md_error(mddev, rdev); + else { + atomic_add(s, &rdev->corrected_errors); + printk(KERN_INFO + "raid1:%s: read error corrected " + "(%d sectors at %llu on %s)\n", + mdname(mddev), s, + (unsigned long long)sect + + rdev->data_offset, + bdevname(rdev->bdev, b)); + } + } + } + sectors -= s; + sect += s; + } +} + static void raid1d(mddev_t *mddev) { r1bio_t *r1_bio; @@ -1460,86 +1577,14 @@ static void raid1d(mddev_t *mddev) * This is all done synchronously while the array is * frozen */ - sector_t sect = r1_bio->sector; - int sectors = r1_bio->sectors; - freeze_array(conf); - if (mddev->ro == 0) while(sectors) { - int s = sectors; - int d = r1_bio->read_disk; - int success = 0; - - if (s > (PAGE_SIZE>>9)) - s = PAGE_SIZE >> 9; - - do { - /* Note: no rcu protection needed here - * as this is synchronous in the raid1d thread - * which is the thread that might remove - * a device. If raid1d ever becomes multi-threaded.... - */ - rdev = conf->mirrors[d].rdev; - if (rdev && - test_bit(In_sync, &rdev->flags) && - sync_page_io(rdev->bdev, - sect + rdev->data_offset, - s<<9, - conf->tmppage, READ)) - success = 1; - else { - d++; - if (d == conf->raid_disks) - d = 0; - } - } while (!success && d != r1_bio->read_disk); - - if (success) { - /* write it back and re-read */ - int start = d; - while (d != r1_bio->read_disk) { - if (d==0) - d = conf->raid_disks; - d--; - rdev = conf->mirrors[d].rdev; - if (rdev && - test_bit(In_sync, &rdev->flags)) { - if (sync_page_io(rdev->bdev, - sect + rdev->data_offset, - s<<9, conf->tmppage, WRITE) == 0) - /* Well, this device is dead */ - md_error(mddev, rdev); - } - } - d = start; - while (d != r1_bio->read_disk) { - if (d==0) - d = conf->raid_disks; - d--; - rdev = conf->mirrors[d].rdev; - if (rdev && - test_bit(In_sync, &rdev->flags)) { - if (sync_page_io(rdev->bdev, - sect + rdev->data_offset, - s<<9, conf->tmppage, READ) == 0) - /* Well, this device is dead */ - md_error(mddev, rdev); - else { - atomic_add(s, &rdev->corrected_errors); - printk(KERN_INFO "raid1:%s: read error corrected (%d sectors at %llu on %s)\n", - mdname(mddev), s, (unsigned long long)(sect + rdev->data_offset), bdevname(rdev->bdev, b)); - } - } - } - } else { - /* Cannot read from anywhere -- bye bye array */ - md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev); - break; - } - sectors -= s; - sect += s; + if (mddev->ro == 0) { + freeze_array(conf); + fix_read_error(conf, r1_bio->read_disk, + r1_bio->sector, + r1_bio->sectors); + unfreeze_array(conf); } - unfreeze_array(conf); - bio = r1_bio->bios[r1_bio->read_disk]; if ((disk=read_balance(conf, r1_bio)) == -1) { printk(KERN_ALERT "raid1: %s: unrecoverable I/O" @@ -1884,15 +1929,11 @@ static int run(mddev_t *mddev) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); disk->head_position = 0; - if (!test_bit(Faulty, &rdev->flags) && test_bit(In_sync, &rdev->flags)) - conf->working_disks++; } conf->raid_disks = mddev->raid_disks; conf->mddev = mddev; spin_lock_init(&conf->device_lock); INIT_LIST_HEAD(&conf->retry_list); - if (conf->working_disks == 1) - mddev->recovery_cp = MaxSector; spin_lock_init(&conf->resync_lock); init_waitqueue_head(&conf->wait_barrier); @@ -1900,11 +1941,6 @@ static int run(mddev_t *mddev) bio_list_init(&conf->pending_bio_list); bio_list_init(&conf->flushing_bio_list); - if (!conf->working_disks) { - printk(KERN_ERR "raid1: no operational mirrors for %s\n", - mdname(mddev)); - goto out_free_conf; - } mddev->degraded = 0; for (i = 0; i < conf->raid_disks; i++) { @@ -1917,6 +1953,13 @@ static int run(mddev_t *mddev) mddev->degraded++; } } + if (mddev->degraded == conf->raid_disks) { + printk(KERN_ERR "raid1: no operational mirrors for %s\n", + mdname(mddev)); + goto out_free_conf; + } + if (conf->raid_disks - mddev->degraded == 1) + mddev->recovery_cp = MaxSector; /* * find the first working one and use it as a starting point @@ -1948,6 +1991,8 @@ static int run(mddev_t *mddev) mddev->queue->unplug_fn = raid1_unplug; mddev->queue->issue_flush_fn = raid1_issue_flush; + mddev->queue->backing_dev_info.congested_fn = raid1_congested; + mddev->queue->backing_dev_info.congested_data = mddev; return 0; @@ -2035,7 +2080,7 @@ static int raid1_reshape(mddev_t *mddev) mirror_info_t *newmirrors; conf_t *conf = mddev_to_conf(mddev); int cnt, raid_disks; - + unsigned long flags; int d, d2; /* Cannot change chunk_size, layout, or level */ @@ -2094,7 +2139,9 @@ static int raid1_reshape(mddev_t *mddev) kfree(conf->poolinfo); conf->poolinfo = newpoolinfo; + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded += (raid_disks - conf->raid_disks); + spin_unlock_irqrestore(&conf->device_lock, flags); conf->raid_disks = mddev->raid_disks = raid_disks; mddev->delta_disks = 0; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 016ddb831c9..1250f0eab4a 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -648,6 +648,26 @@ static int raid10_issue_flush(request_queue_t *q, struct gendisk *disk, return ret; } +static int raid10_congested(void *data, int bits) +{ + mddev_t *mddev = data; + conf_t *conf = mddev_to_conf(mddev); + int i, ret = 0; + + rcu_read_lock(); + for (i = 0; i < mddev->raid_disks && ret == 0; i++) { + mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); + if (rdev && !test_bit(Faulty, &rdev->flags)) { + request_queue_t *q = bdev_get_queue(rdev->bdev); + + ret |= bdi_congested(&q->backing_dev_info, bits); + } + } + rcu_read_unlock(); + return ret; +} + + /* Barriers.... * Sometimes we need to suspend IO while we do something else, * either some resync/recovery, or reconfigure the array. @@ -921,7 +941,7 @@ static void status(struct seq_file *seq, mddev_t *mddev) seq_printf(seq, " %d far-copies", conf->far_copies); } seq_printf(seq, " [%d/%d] [", conf->raid_disks, - conf->working_disks); + conf->raid_disks - mddev->degraded); for (i = 0; i < conf->raid_disks; i++) seq_printf(seq, "%s", conf->mirrors[i].rdev && @@ -941,7 +961,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) * else mark the drive as failed */ if (test_bit(In_sync, &rdev->flags) - && conf->working_disks == 1) + && conf->raid_disks-mddev->degraded == 1) /* * Don't fail the drive, just return an IO error. * The test should really be more sophisticated than @@ -950,20 +970,21 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) * really dead" tests... */ return; - if (test_bit(In_sync, &rdev->flags)) { + if (test_and_clear_bit(In_sync, &rdev->flags)) { + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded++; - conf->working_disks--; + spin_unlock_irqrestore(&conf->device_lock, flags); /* * if recovery is running, make sure it aborts. */ set_bit(MD_RECOVERY_ERR, &mddev->recovery); } - clear_bit(In_sync, &rdev->flags); set_bit(Faulty, &rdev->flags); - mddev->sb_dirty = 1; + set_bit(MD_CHANGE_DEVS, &mddev->flags); printk(KERN_ALERT "raid10: Disk failure on %s, disabling device. \n" " Operation continuing on %d devices\n", - bdevname(rdev->bdev,b), conf->working_disks); + bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded); } static void print_conf(conf_t *conf) @@ -976,7 +997,7 @@ static void print_conf(conf_t *conf) printk("(!conf)\n"); return; } - printk(" --- wd:%d rd:%d\n", conf->working_disks, + printk(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded, conf->raid_disks); for (i = 0; i < conf->raid_disks; i++) { @@ -1034,10 +1055,11 @@ static int raid10_spare_active(mddev_t *mddev) tmp = conf->mirrors + i; if (tmp->rdev && !test_bit(Faulty, &tmp->rdev->flags) - && !test_bit(In_sync, &tmp->rdev->flags)) { - conf->working_disks++; + && !test_and_set_bit(In_sync, &tmp->rdev->flags)) { + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded--; - set_bit(In_sync, &tmp->rdev->flags); + spin_unlock_irqrestore(&conf->device_lock, flags); } } @@ -1350,9 +1372,119 @@ static void recovery_request_write(mddev_t *mddev, r10bio_t *r10_bio) * * 1. Retries failed read operations on working mirrors. * 2. Updates the raid superblock when problems encounter. - * 3. Performs writes following reads for array syncronising. + * 3. Performs writes following reads for array synchronising. */ +static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) +{ + int sect = 0; /* Offset from r10_bio->sector */ + int sectors = r10_bio->sectors; + mdk_rdev_t*rdev; + while(sectors) { + int s = sectors; + int sl = r10_bio->read_slot; + int success = 0; + int start; + + if (s > (PAGE_SIZE>>9)) + s = PAGE_SIZE >> 9; + + rcu_read_lock(); + do { + int d = r10_bio->devs[sl].devnum; + rdev = rcu_dereference(conf->mirrors[d].rdev); + if (rdev && + test_bit(In_sync, &rdev->flags)) { + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); + success = sync_page_io(rdev->bdev, + r10_bio->devs[sl].addr + + sect + rdev->data_offset, + s<<9, + conf->tmppage, READ); + rdev_dec_pending(rdev, mddev); + rcu_read_lock(); + if (success) + break; + } + sl++; + if (sl == conf->copies) + sl = 0; + } while (!success && sl != r10_bio->read_slot); + rcu_read_unlock(); + + if (!success) { + /* Cannot read from anywhere -- bye bye array */ + int dn = r10_bio->devs[r10_bio->read_slot].devnum; + md_error(mddev, conf->mirrors[dn].rdev); + break; + } + + start = sl; + /* write it back and re-read */ + rcu_read_lock(); + while (sl != r10_bio->read_slot) { + int d; + if (sl==0) + sl = conf->copies; + sl--; + d = r10_bio->devs[sl].devnum; + rdev = rcu_dereference(conf->mirrors[d].rdev); + if (rdev && + test_bit(In_sync, &rdev->flags)) { + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); + atomic_add(s, &rdev->corrected_errors); + if (sync_page_io(rdev->bdev, + r10_bio->devs[sl].addr + + sect + rdev->data_offset, + s<<9, conf->tmppage, WRITE) + == 0) + /* Well, this device is dead */ + md_error(mddev, rdev); + rdev_dec_pending(rdev, mddev); + rcu_read_lock(); + } + } + sl = start; + while (sl != r10_bio->read_slot) { + int d; + if (sl==0) + sl = conf->copies; + sl--; + d = r10_bio->devs[sl].devnum; + rdev = rcu_dereference(conf->mirrors[d].rdev); + if (rdev && + test_bit(In_sync, &rdev->flags)) { + char b[BDEVNAME_SIZE]; + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); + if (sync_page_io(rdev->bdev, + r10_bio->devs[sl].addr + + sect + rdev->data_offset, + s<<9, conf->tmppage, READ) == 0) + /* Well, this device is dead */ + md_error(mddev, rdev); + else + printk(KERN_INFO + "raid10:%s: read error corrected" + " (%d sectors at %llu on %s)\n", + mdname(mddev), s, + (unsigned long long)sect+ + rdev->data_offset, + bdevname(rdev->bdev, b)); + + rdev_dec_pending(rdev, mddev); + rcu_read_lock(); + } + } + rcu_read_unlock(); + + sectors -= s; + sect += s; + } +} + static void raid10d(mddev_t *mddev) { r10bio_t *r10_bio; @@ -1413,105 +1545,12 @@ static void raid10d(mddev_t *mddev) * This is all done synchronously while the array is * frozen. */ - int sect = 0; /* Offset from r10_bio->sector */ - int sectors = r10_bio->sectors; - freeze_array(conf); - if (mddev->ro == 0) while(sectors) { - int s = sectors; - int sl = r10_bio->read_slot; - int success = 0; - - if (s > (PAGE_SIZE>>9)) - s = PAGE_SIZE >> 9; - - rcu_read_lock(); - do { - int d = r10_bio->devs[sl].devnum; - rdev = rcu_dereference(conf->mirrors[d].rdev); - if (rdev && - test_bit(In_sync, &rdev->flags)) { - atomic_inc(&rdev->nr_pending); - rcu_read_unlock(); - success = sync_page_io(rdev->bdev, - r10_bio->devs[sl].addr + - sect + rdev->data_offset, - s<<9, - conf->tmppage, READ); - rdev_dec_pending(rdev, mddev); - rcu_read_lock(); - if (success) - break; - } - sl++; - if (sl == conf->copies) - sl = 0; - } while (!success && sl != r10_bio->read_slot); - rcu_read_unlock(); - - if (success) { - int start = sl; - /* write it back and re-read */ - rcu_read_lock(); - while (sl != r10_bio->read_slot) { - int d; - if (sl==0) - sl = conf->copies; - sl--; - d = r10_bio->devs[sl].devnum; - rdev = rcu_dereference(conf->mirrors[d].rdev); - if (rdev && - test_bit(In_sync, &rdev->flags)) { - atomic_inc(&rdev->nr_pending); - rcu_read_unlock(); - atomic_add(s, &rdev->corrected_errors); - if (sync_page_io(rdev->bdev, - r10_bio->devs[sl].addr + - sect + rdev->data_offset, - s<<9, conf->tmppage, WRITE) == 0) - /* Well, this device is dead */ - md_error(mddev, rdev); - rdev_dec_pending(rdev, mddev); - rcu_read_lock(); - } - } - sl = start; - while (sl != r10_bio->read_slot) { - int d; - if (sl==0) - sl = conf->copies; - sl--; - d = r10_bio->devs[sl].devnum; - rdev = rcu_dereference(conf->mirrors[d].rdev); - if (rdev && - test_bit(In_sync, &rdev->flags)) { - atomic_inc(&rdev->nr_pending); - rcu_read_unlock(); - if (sync_page_io(rdev->bdev, - r10_bio->devs[sl].addr + - sect + rdev->data_offset, - s<<9, conf->tmppage, READ) == 0) - /* Well, this device is dead */ - md_error(mddev, rdev); - else - printk(KERN_INFO "raid10:%s: read error corrected (%d sectors at %llu on %s)\n", - mdname(mddev), s, (unsigned long long)(sect+rdev->data_offset), bdevname(rdev->bdev, b)); - - rdev_dec_pending(rdev, mddev); - rcu_read_lock(); - } - } - rcu_read_unlock(); - } else { - /* Cannot read from anywhere -- bye bye array */ - md_error(mddev, conf->mirrors[r10_bio->devs[r10_bio->read_slot].devnum].rdev); - break; - } - sectors -= s; - sect += s; + if (mddev->ro == 0) { + freeze_array(conf); + fix_read_error(conf, mddev, r10_bio); + unfreeze_array(conf); } - unfreeze_array(conf); - bio = r10_bio->devs[r10_bio->read_slot].bio; r10_bio->devs[r10_bio->read_slot].bio = mddev->ro ? IO_BLOCKED : NULL; @@ -2018,8 +2057,6 @@ static int run(mddev_t *mddev) mddev->queue->max_sectors = (PAGE_SIZE>>9); disk->head_position = 0; - if (!test_bit(Faulty, &rdev->flags) && test_bit(In_sync, &rdev->flags)) - conf->working_disks++; } conf->raid_disks = mddev->raid_disks; conf->mddev = mddev; @@ -2077,6 +2114,8 @@ static int run(mddev_t *mddev) mddev->queue->unplug_fn = raid10_unplug; mddev->queue->issue_flush_fn = raid10_issue_flush; + mddev->queue->backing_dev_info.congested_fn = raid10_congested; + mddev->queue->backing_dev_info.congested_data = mddev; /* Calculate max read-ahead size. * We need to readahead at least twice a whole stripe.... diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 45006600716..37e4ff661b6 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -636,7 +636,6 @@ static int raid5_end_write_request (struct bio *bi, unsigned int bytes_done, struct stripe_head *sh = bi->bi_private; raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks, i; - unsigned long flags; int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags); if (bi->bi_size) @@ -654,7 +653,6 @@ static int raid5_end_write_request (struct bio *bi, unsigned int bytes_done, return 0; } - spin_lock_irqsave(&conf->device_lock, flags); if (!uptodate) md_error(conf->mddev, conf->disks[i].rdev); @@ -662,8 +660,7 @@ static int raid5_end_write_request (struct bio *bi, unsigned int bytes_done, clear_bit(R5_LOCKED, &sh->dev[i].flags); set_bit(STRIPE_HANDLE, &sh->state); - __release_stripe(conf, sh); - spin_unlock_irqrestore(&conf->device_lock, flags); + release_stripe(sh); return 0; } @@ -696,12 +693,12 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) PRINTK("raid5: error called\n"); if (!test_bit(Faulty, &rdev->flags)) { - mddev->sb_dirty = 1; - if (test_bit(In_sync, &rdev->flags)) { - conf->working_disks--; + set_bit(MD_CHANGE_DEVS, &mddev->flags); + if (test_and_clear_bit(In_sync, &rdev->flags)) { + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded++; - conf->failed_disks++; - clear_bit(In_sync, &rdev->flags); + spin_unlock_irqrestore(&conf->device_lock, flags); /* * if recovery was running, make sure it aborts. */ @@ -711,7 +708,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) printk (KERN_ALERT "raid5: Disk failure on %s, disabling device." " Operation continuing on %d devices\n", - bdevname(rdev->bdev,b), conf->working_disks); + bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded); } } @@ -1353,10 +1350,9 @@ static int page_is_zero(struct page *p) static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks) { int sectors_per_chunk = conf->chunk_size >> 9; - sector_t x = stripe; int pd_idx, dd_idx; - int chunk_offset = sector_div(x, sectors_per_chunk); - stripe = x; + int chunk_offset = sector_div(stripe, sectors_per_chunk); + raid5_compute_sector(stripe*(disks-1)*sectors_per_chunk + chunk_offset, disks, disks-1, &dd_idx, &pd_idx, conf); return pd_idx; @@ -2597,6 +2593,24 @@ static int raid5_issue_flush(request_queue_t *q, struct gendisk *disk, return ret; } +static int raid5_congested(void *data, int bits) +{ + mddev_t *mddev = data; + raid5_conf_t *conf = mddev_to_conf(mddev); + + /* No difference between reads and writes. Just check + * how busy the stripe_cache is + */ + if (conf->inactive_blocked) + return 1; + if (conf->quiesce) + return 1; + if (list_empty_careful(&conf->inactive_list)) + return 1; + + return 0; +} + static int make_request(request_queue_t *q, struct bio * bi) { mddev_t *mddev = q->queuedata; @@ -2781,9 +2795,9 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes)==0); mddev->reshape_position = conf->expand_progress; - mddev->sb_dirty = 1; + set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); - wait_event(mddev->sb_wait, mddev->sb_dirty == 0 || + wait_event(mddev->sb_wait, mddev->flags == 0 || kthread_should_stop()); spin_lock_irq(&conf->device_lock); conf->expand_lo = mddev->reshape_position; @@ -3074,6 +3088,7 @@ static int run(mddev_t *mddev) mdk_rdev_t *rdev; struct disk_info *disk; struct list_head *tmp; + int working_disks = 0; if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) { printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n", @@ -3176,14 +3191,14 @@ static int run(mddev_t *mddev) printk(KERN_INFO "raid5: device %s operational as raid" " disk %d\n", bdevname(rdev->bdev,b), raid_disk); - conf->working_disks++; + working_disks++; } } /* * 0 for a fully functional array, 1 or 2 for a degraded array. */ - mddev->degraded = conf->failed_disks = conf->raid_disks - conf->working_disks; + mddev->degraded = conf->raid_disks - working_disks; conf->mddev = mddev; conf->chunk_size = mddev->chunk_size; conf->level = mddev->level; @@ -3218,7 +3233,7 @@ static int run(mddev_t *mddev) if (mddev->degraded > conf->max_degraded) { printk(KERN_ERR "raid5: not enough operational devices for %s" " (%d/%d failed)\n", - mdname(mddev), conf->failed_disks, conf->raid_disks); + mdname(mddev), mddev->degraded, conf->raid_disks); goto abort; } @@ -3299,6 +3314,9 @@ static int run(mddev_t *mddev) mddev->queue->unplug_fn = raid5_unplug_device; mddev->queue->issue_flush_fn = raid5_issue_flush; + mddev->queue->backing_dev_info.congested_fn = raid5_congested; + mddev->queue->backing_dev_info.congested_data = mddev; + mddev->array_size = mddev->size * (conf->previous_raid_disks - conf->max_degraded); @@ -3375,7 +3393,7 @@ static void status (struct seq_file *seq, mddev_t *mddev) int i; seq_printf (seq, " level %d, %dk chunk, algorithm %d", mddev->level, mddev->chunk_size >> 10, mddev->layout); - seq_printf (seq, " [%d/%d] [", conf->raid_disks, conf->working_disks); + seq_printf (seq, " [%d/%d] [", conf->raid_disks, conf->raid_disks - mddev->degraded); for (i = 0; i < conf->raid_disks; i++) seq_printf (seq, "%s", conf->disks[i].rdev && @@ -3397,8 +3415,8 @@ static void print_raid5_conf (raid5_conf_t *conf) printk("(conf==NULL)\n"); return; } - printk(" --- rd:%d wd:%d fd:%d\n", conf->raid_disks, - conf->working_disks, conf->failed_disks); + printk(" --- rd:%d wd:%d\n", conf->raid_disks, + conf->raid_disks - conf->mddev->degraded); for (i = 0; i < conf->raid_disks; i++) { char b[BDEVNAME_SIZE]; @@ -3420,11 +3438,11 @@ static int raid5_spare_active(mddev_t *mddev) tmp = conf->disks + i; if (tmp->rdev && !test_bit(Faulty, &tmp->rdev->flags) - && !test_bit(In_sync, &tmp->rdev->flags)) { + && !test_and_set_bit(In_sync, &tmp->rdev->flags)) { + unsigned long flags; + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded--; - conf->failed_disks--; - conf->working_disks++; - set_bit(In_sync, &tmp->rdev->flags); + spin_unlock_irqrestore(&conf->device_lock, flags); } } print_raid5_conf(conf); @@ -3560,6 +3578,7 @@ static int raid5_start_reshape(mddev_t *mddev) struct list_head *rtmp; int spares = 0; int added_devices = 0; + unsigned long flags; if (mddev->degraded || test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) @@ -3593,7 +3612,6 @@ static int raid5_start_reshape(mddev_t *mddev) if (raid5_add_disk(mddev, rdev)) { char nm[20]; set_bit(In_sync, &rdev->flags); - conf->working_disks++; added_devices++; rdev->recovery_offset = 0; sprintf(nm, "rd%d", rdev->raid_disk); @@ -3602,10 +3620,12 @@ static int raid5_start_reshape(mddev_t *mddev) break; } + spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded = (conf->raid_disks - conf->previous_raid_disks) - added_devices; + spin_unlock_irqrestore(&conf->device_lock, flags); mddev->raid_disks = conf->raid_disks; mddev->reshape_position = 0; - mddev->sb_dirty = 1; + set_bit(MD_CHANGE_DEVS, &mddev->flags); clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 9953201c670..a67f5efc983 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -165,7 +165,7 @@ static struct devprobe2 mca_probes[] __initdata = { * look for EISA/PCI/MCA cards in addition to ISA cards). */ static struct devprobe2 isa_probes[] __initdata = { -#ifdef CONFIG_HP100 /* ISA, EISA & PCI */ +#if defined(CONFIG_HP100) && defined(CONFIG_ISA) /* ISA, EISA */ {hp100_probe, 0}, #endif #ifdef CONFIG_3C515 diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 34412bc7c4b..d01870619a4 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -944,12 +944,13 @@ extern int fs_mii_connect(struct net_device *dev); extern void fs_mii_disconnect(struct net_device *dev); static struct net_device *fs_init_instance(struct device *dev, - const struct fs_platform_info *fpi) + struct fs_platform_info *fpi) { struct net_device *ndev = NULL; struct fs_enet_private *fep = NULL; int privsize, i, r, err = 0, registered = 0; + fpi->fs_no = fs_get_id(fpi); /* guard */ if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX) return ERR_PTR(-EINVAL); @@ -971,7 +972,7 @@ static struct net_device *fs_init_instance(struct device *dev, dev_set_drvdata(dev, ndev); fep->fpi = fpi; if (fpi->init_ioports) - fpi->init_ioports(); + fpi->init_ioports((struct fs_platform_info *)fpi); #ifdef CONFIG_FS_ENET_HAS_FEC if (fs_get_fec_index(fpi->fs_no) >= 0) diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 561db440bc2..ae8ad4f763b 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -188,7 +188,7 @@ struct hp100_private { /* * variables */ -#ifndef MODULE +#ifdef CONFIG_ISA static const char *hp100_isa_tbl[] = { "HWPF150", /* HP J2573 rev A */ "HWP1950", /* HP J2573 */ @@ -335,7 +335,7 @@ static __devinit const char *hp100_read_id(int ioaddr) return str; } -#ifndef MODULE +#ifdef CONFIG_ISA static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr) { const char *sig; @@ -393,7 +393,9 @@ static int __init hp100_isa_probe(struct net_device *dev, int addr) } return err; } +#endif /* CONFIG_ISA */ +#if !defined(MODULE) && defined(CONFIG_ISA) struct net_device * __init hp100_probe(int unit) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); @@ -423,7 +425,7 @@ struct net_device * __init hp100_probe(int unit) free_netdev(dev); return ERR_PTR(err); } -#endif +#endif /* !MODULE && CONFIG_ISA */ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr, u_char bus, struct pci_dev *pci_dev) diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 6469130c141..c26a4b8e552 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -200,8 +200,8 @@ static struct net_device_stats *ifb_get_stats(struct net_device *dev) pr_debug("tasklets stats %ld:%ld:%ld:%ld:%ld:%ld:%ld:%ld:%ld \n", dp->st_task_enter, dp->st_txq_refl_try, dp->st_rxq_enter, - dp->st_rx2tx_tran dp->st_rxq_notenter, dp->st_rx_frm_egr, - dp->st_rx_frm_ing, dp->st_rxq_check, dp->st_rxq_rsch ); + dp->st_rx2tx_tran, dp->st_rxq_notenter, dp->st_rx_frm_egr, + dp->st_rx_frm_ing, dp->st_rxq_check, dp->st_rxq_rsch); return stats; } diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 43894ddec7d..fe800dc0be9 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -3374,10 +3374,6 @@ __setup("parport_init_mode=",parport_init_mode_setup); static int __init parport_pc_init(void) { -#if defined(CONFIG_PPC_MERGE) - if (check_legacy_ioport(PARALLEL_BASE)) - return -ENODEV; -#endif if (parse_parport_params()) return -EINVAL; diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index f2e0179962e..3ac5b123215 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -1049,6 +1049,10 @@ static int __init isapnp_init(void) printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n"); return 0; } +#ifdef CONFIG_PPC_MERGE + if (check_legacy_ioport(_PIDXR) || check_legacy_ioport(_PNPWRP)) + return -EINVAL; +#endif #ifdef ISAPNP_REGION_OK if (!request_region(_PIDXR, 1, "isapnp index")) { printk(KERN_ERR "isapnp: Index Register 0x%x already used\n", _PIDXR); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0ae9ced00ed..10c2daab99a 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -320,8 +320,8 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset) case UPIO_TSI: if (offset == UART_IIR) { - tmp = readl((u32 *)(up->port.membase + UART_RX)); - return (cpu_to_le32(tmp) >> 8) & 0xff; + tmp = readl(up->port.membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ } else return readb(up->port.membase + offset); diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 90ff96e3339..a0d6136deb9 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -46,6 +46,7 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/delay.h> +#include <asm/fs_pd.h> #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -1022,15 +1023,17 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) { struct resource *r; struct fs_uart_platform_info *pdata = pdev->dev.platform_data; - int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */ + int idx; /* It is UART_SMCx or UART_SCCx index */ struct uart_cpm_port *pinfo; int line; u32 mem, pram; + idx = pdata->fs_no = fs_uart_get_id(pdata); + line = cpm_uart_id2nr(idx); if(line < 0) { printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx); - return -1; + return -EINVAL; } pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx]; @@ -1044,11 +1047,11 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"))) return -EINVAL; - mem = r->start; + mem = (u32)ioremap(r->start, r->end - r->start + 1); if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram"))) return -EINVAL; - pram = r->start; + pram = (u32)ioremap(r->start, r->end - r->start + 1); if(idx > fsid_smc2_uart) { pinfo->sccp = (scc_t *)mem; @@ -1179,7 +1182,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) pdata = pdev->dev.platform_data; if (pdata) if (pdata->init_ioports) - pdata->init_ioports(); + pdata->init_ioports(pdata); cpm_uart_drv_get_platform_data(pdev, 1); } @@ -1189,11 +1192,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) if (options) { uart_parse_options(options, &baud, &parity, &bits, &flow); } else { - bd_t *bd = (bd_t *) __res; - - if (bd->bi_baudrate) - baud = bd->bi_baudrate; - else + if ((baud = uart_baudrate()) == -1) baud = 9600; } @@ -1266,13 +1265,14 @@ static int cpm_uart_drv_probe(struct device *dev) } pdata = pdev->dev.platform_data; - pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no)); if ((ret = cpm_uart_drv_get_platform_data(pdev, 0))) return ret; + pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no)); + if (pdata->init_ioports) - pdata->init_ioports(); + pdata->init_ioports(pdata); ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index ef3bb476c43..b691d3e1475 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -40,6 +40,7 @@ #include <asm/io.h> #include <asm/irq.h> +#include <asm/fs_pd.h> #include <linux/serial_core.h> #include <linux/kernel.h> @@ -50,8 +51,9 @@ void cpm_line_cr_cmd(int line, int cmd) { - volatile cpm_cpm2_t *cp = cpmp; ulong val; + volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); + switch (line) { case UART_SMC1: @@ -84,11 +86,14 @@ void cpm_line_cr_cmd(int line, int cmd) } cp->cp_cpcr = val; while (cp->cp_cpcr & CPM_CR_FLG) ; + + cpm2_unmap(cp); } void smc1_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); /* SMC1 is only on port D */ io->iop_ppard |= 0x00c00000; @@ -97,13 +102,17 @@ void smc1_lineif(struct uart_cpm_port *pinfo) io->iop_psord &= ~0x00c00000; /* Wire BRG1 to SMC1 */ - cpm2_immr->im_cpmux.cmx_smr &= 0x0f; + cpmux->cmx_smr &= 0x0f; pinfo->brg = 1; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void smc2_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); /* SMC2 is only on port A */ io->iop_ppara |= 0x00c00000; @@ -112,13 +121,17 @@ void smc2_lineif(struct uart_cpm_port *pinfo) io->iop_psora &= ~0x00c00000; /* Wire BRG2 to SMC2 */ - cpm2_immr->im_cpmux.cmx_smr &= 0xf0; + cpmux->cmx_smr &= 0xf0; pinfo->brg = 2; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc1_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); /* Use Port D for SCC1 instead of other functions. */ io->iop_ppard |= 0x00000003; @@ -128,9 +141,12 @@ void scc1_lineif(struct uart_cpm_port *pinfo) io->iop_pdird |= 0x00000002; /* Tx */ /* Wire BRG1 to SCC1 */ - cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff; - cpm2_immr->im_cpmux.cmx_scr |= 0x00000000; + cpmux->cmx_scr &= 0x00ffffff; + cpmux->cmx_scr |= 0x00000000; pinfo->brg = 1; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc2_lineif(struct uart_cpm_port *pinfo) @@ -143,43 +159,57 @@ void scc2_lineif(struct uart_cpm_port *pinfo) * be supported in a sane fashion. */ #ifndef CONFIG_STX_GP3 - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); + io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; io->iop_psorb |= 0x00880000; io->iop_pdirb &= ~0x00030000; io->iop_psorb &= ~0x00030000; #endif - cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff; - cpm2_immr->im_cpmux.cmx_scr |= 0x00090000; + cpmux->cmx_scr &= 0xff00ffff; + cpmux->cmx_scr |= 0x00090000; pinfo->brg = 2; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc3_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); + io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; io->iop_psorb |= 0x00880000; io->iop_pdirb &= ~0x00030000; io->iop_psorb &= ~0x00030000; - cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff; - cpm2_immr->im_cpmux.cmx_scr |= 0x00001200; + cpmux->cmx_scr &= 0xffff00ff; + cpmux->cmx_scr |= 0x00001200; pinfo->brg = 3; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } void scc4_lineif(struct uart_cpm_port *pinfo) { - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + volatile iop_cpm2_t *io = cpm2_map(im_ioport); + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); io->iop_ppard |= 0x00000600; io->iop_psord &= ~0x00000600; /* Tx/Rx */ io->iop_pdird &= ~0x00000200; /* Rx */ io->iop_pdird |= 0x00000400; /* Tx */ - cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00; - cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b; + cpmux->cmx_scr &= 0xffffff00; + cpmux->cmx_scr |= 0x0000001b; pinfo->brg = 4; + + cpm2_unmap(cpmux); + cpm2_unmap(io); } /* @@ -254,88 +284,103 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) /* Setup any dynamic params in the uart desc */ int cpm_uart_init_portdesc(void) { +#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2) + u32 addr; +#endif pr_debug("CPM uart[-]:init portdesc\n"); cpm_uart_nr = 0; #ifdef CONFIG_SERIAL_CPM_SMC1 - cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0]; - cpm_uart_ports[UART_SMC1].smcup = - (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1]; - *(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1; + cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]); cpm_uart_ports[UART_SMC1].port.mapbase = - (unsigned long)&cpm2_immr->im_smc[0]; + (unsigned long)cpm_uart_ports[UART_SMC1].smcp; + + cpm_uart_ports[UART_SMC1].smcup = + (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE); + addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2); + *addr = PROFF_SMC1; + cpm2_unmap(addr); + cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; #endif #ifdef CONFIG_SERIAL_CPM_SMC2 - cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1]; - cpm_uart_ports[UART_SMC2].smcup = - (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2]; - *(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC2_BASE]) = PROFF_SMC2; + cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]); cpm_uart_ports[UART_SMC2].port.mapbase = - (unsigned long)&cpm2_immr->im_smc[1]; + (unsigned long)cpm_uart_ports[UART_SMC2].smcp; + + cpm_uart_ports[UART_SMC2].smcup = + (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE); + addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2); + *addr = PROFF_SMC2; + cpm2_unmap(addr); + cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; #endif #ifdef CONFIG_SERIAL_CPM_SCC1 - cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0]; - cpm_uart_ports[UART_SCC1].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1]; + cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]); cpm_uart_ports[UART_SCC1].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[0]; + (unsigned long)cpm_uart_ports[UART_SCC1].sccp; + cpm_uart_ports[UART_SCC1].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC1].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; #endif #ifdef CONFIG_SERIAL_CPM_SCC2 - cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1]; - cpm_uart_ports[UART_SCC2].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2]; + cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]); cpm_uart_ports[UART_SCC2].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[1]; + (unsigned long)cpm_uart_ports[UART_SCC2].sccp; + cpm_uart_ports[UART_SCC2].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC2].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; #endif #ifdef CONFIG_SERIAL_CPM_SCC3 - cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2]; - cpm_uart_ports[UART_SCC3].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3]; + cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]); cpm_uart_ports[UART_SCC3].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[2]; + (unsigned long)cpm_uart_ports[UART_SCC3].sccp; + cpm_uart_ports[UART_SCC3].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC3].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; #endif #ifdef CONFIG_SERIAL_CPM_SCC4 - cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3]; - cpm_uart_ports[UART_SCC4].sccup = - (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4]; + cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]); cpm_uart_ports[UART_SCC4].port.mapbase = - (unsigned long)&cpm2_immr->im_scc[3]; + (unsigned long)cpm_uart_ports[UART_SCC4].sccp; + cpm_uart_ports[UART_SCC4].sccup = + (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE); + cpm_uart_ports[UART_SCC4].sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock(); cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; #endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h index 4793fecf8ec..a663300d347 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h @@ -40,6 +40,6 @@ static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB; } -#define DPRAM_BASE ((unsigned char *)&cpm2_immr->im_dprambase[0]) +#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0)) #endif diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e0ef3328942..a1c8923b0bf 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -53,6 +53,11 @@ config FB (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FB_DDC + tristate + depends on FB && I2C && I2C_ALGOBIT + default n + config FB_CFB_FILLRECT tristate depends on FB @@ -696,6 +701,7 @@ config FB_NVIDIA depends on FB && PCI select I2C_ALGOBIT if FB_NVIDIA_I2C select I2C if FB_NVIDIA_I2C + select FB_DDC if FB_NVIDIA_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -734,6 +740,7 @@ config FB_RIVA depends on FB && PCI select I2C_ALGOBIT if FB_RIVA_I2C select I2C if FB_RIVA_I2C + select FB_DDC if FB_RIVA_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -822,6 +829,7 @@ config FB_I810_I2C depends on FB_I810 && FB_I810_GTF select I2C select I2C_ALGOBIT + select FB_DDC help config FB_INTEL @@ -1012,6 +1020,7 @@ config FB_RADEON depends on FB && PCI select I2C_ALGOBIT if FB_RADEON_I2C select I2C if FB_RADEON_I2C + select FB_DDC if FB_RADEON_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1140,6 +1149,7 @@ config FB_SAVAGE depends on FB && PCI && EXPERIMENTAL select I2C_ALGOBIT if FB_SAVAGE_I2C select I2C if FB_SAVAGE_I2C + select FB_DDC if FB_SAVAGE_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1619,7 +1629,8 @@ config FB_VIRTUAL kernel option `video=vfb:'. To compile this driver as a module, choose M here: the - module will be called vfb. + module will be called vfb. In order to load it, you must use + the vfb_enable=1 option. If unsure, say N. if VT diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 481c6c9695f..a6980e9a248 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o obj-$(CONFIG_FB_MACMODES) += macmodes.o +obj-$(CONFIG_FB_DDC) += fb_ddc.o # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h index 55fb8b04489..b04f49fb976 100644 --- a/drivers/video/aty/atyfb.h +++ b/drivers/video/aty/atyfb.h @@ -355,5 +355,9 @@ static inline void wait_for_idle(struct atyfb_par *par) extern void aty_reset_engine(const struct atyfb_par *par); extern void aty_init_engine(struct atyfb_par *par, struct fb_info *info); -extern void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par); extern u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par); + +void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); +void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); +void atyfb_imageblit(struct fb_info *info, const struct fb_image *image); + diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 19a71f04578..b45c9fd1b33 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -240,9 +240,6 @@ static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, static int atyfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info); static int atyfb_blank(int blank, struct fb_info *info); static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg); -extern void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); -extern void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); -extern void atyfb_imageblit(struct fb_info *info, const struct fb_image *image); #ifdef __sparc__ static int atyfb_mmap(struct fb_info *info, struct vm_area_struct *vma); #endif @@ -3863,6 +3860,7 @@ static int __devinit atyfb_setup(char *options) static int __devinit atyfb_init(void) { + int err1 = 1, err2 = 1; #ifndef MODULE char *option = NULL; @@ -3872,12 +3870,13 @@ static int __devinit atyfb_init(void) #endif #ifdef CONFIG_PCI - pci_register_driver(&atyfb_driver); + err1 = pci_register_driver(&atyfb_driver); #endif #ifdef CONFIG_ATARI - atyfb_atari_probe(); + err2 = atyfb_atari_probe(); #endif - return 0; + + return (err1 && err2) ? -ENODEV : 0; } static void __exit atyfb_exit(void) diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index e7056934c6a..5080816be65 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -27,7 +27,7 @@ u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par) return res; } -void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par) +static void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par) { /* write addr byte */ aty_st_8(CLOCK_CNTL_ADDR, ((offset << 2) & PLL_ADDR) | PLL_WR_EN, par); diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c index 9aaca58c074..67675452009 100644 --- a/drivers/video/aty/radeon_i2c.c +++ b/drivers/video/aty/radeon_i2c.c @@ -16,8 +16,6 @@ #include "radeonfb.h" #include "../edid.h" -#define RADEON_DDC 0x50 - static void radeon_gpio_setscl(void* data, int state) { struct radeon_i2c_chan *chan = data; @@ -138,108 +136,10 @@ void radeon_delete_i2c_busses(struct radeonfb_info *rinfo) rinfo->i2c[3].rinfo = NULL; } - -static u8 *radeon_do_probe_i2c_edid(struct radeon_i2c_chan *chan) -{ - u8 start = 0x0; - struct i2c_msg msgs[] = { - { - .addr = RADEON_DDC, - .len = 1, - .buf = &start, - }, { - .addr = RADEON_DDC, - .flags = I2C_M_RD, - .len = EDID_LENGTH, - }, - }; - u8 *buf; - - buf = kmalloc(EDID_LENGTH, GFP_KERNEL); - if (!buf) { - dev_warn(&chan->rinfo->pdev->dev, "Out of memory!\n"); - return NULL; - } - msgs[1].buf = buf; - - if (i2c_transfer(&chan->adapter, msgs, 2) == 2) - return buf; - dev_dbg(&chan->rinfo->pdev->dev, "Unable to read EDID block.\n"); - kfree(buf); - return NULL; -} - - -int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn, u8 **out_edid) +int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn, + u8 **out_edid) { - u32 reg = rinfo->i2c[conn-1].ddc_reg; - u8 *edid = NULL; - int i, j; - - OUTREG(reg, INREG(reg) & - ~(VGA_DDC_DATA_OUTPUT | VGA_DDC_CLK_OUTPUT)); - - OUTREG(reg, INREG(reg) & ~(VGA_DDC_CLK_OUT_EN)); - (void)INREG(reg); - - for (i = 0; i < 3; i++) { - /* For some old monitors we need the - * following process to initialize/stop DDC - */ - OUTREG(reg, INREG(reg) & ~(VGA_DDC_DATA_OUT_EN)); - (void)INREG(reg); - msleep(13); - - OUTREG(reg, INREG(reg) & ~(VGA_DDC_CLK_OUT_EN)); - (void)INREG(reg); - for (j = 0; j < 5; j++) { - msleep(10); - if (INREG(reg) & VGA_DDC_CLK_INPUT) - break; - } - if (j == 5) - continue; - - OUTREG(reg, INREG(reg) | VGA_DDC_DATA_OUT_EN); - (void)INREG(reg); - msleep(15); - OUTREG(reg, INREG(reg) | VGA_DDC_CLK_OUT_EN); - (void)INREG(reg); - msleep(15); - OUTREG(reg, INREG(reg) & ~(VGA_DDC_DATA_OUT_EN)); - (void)INREG(reg); - msleep(15); - - /* Do the real work */ - edid = radeon_do_probe_i2c_edid(&rinfo->i2c[conn-1]); - - OUTREG(reg, INREG(reg) | - (VGA_DDC_DATA_OUT_EN | VGA_DDC_CLK_OUT_EN)); - (void)INREG(reg); - msleep(15); - - OUTREG(reg, INREG(reg) & ~(VGA_DDC_CLK_OUT_EN)); - (void)INREG(reg); - for (j = 0; j < 10; j++) { - msleep(10); - if (INREG(reg) & VGA_DDC_CLK_INPUT) - break; - } - - OUTREG(reg, INREG(reg) & ~(VGA_DDC_DATA_OUT_EN)); - (void)INREG(reg); - msleep(15); - OUTREG(reg, INREG(reg) | - (VGA_DDC_DATA_OUT_EN | VGA_DDC_CLK_OUT_EN)); - (void)INREG(reg); - if (edid) - break; - } - /* Release the DDC lines when done or the Apple Cinema HD display - * will switch off - */ - OUTREG(reg, INREG(reg) & ~(VGA_DDC_CLK_OUT_EN | VGA_DDC_DATA_OUT_EN)); - (void)INREG(reg); + u8 *edid = fb_ddc_read(&rinfo->i2c[conn-1].adapter); if (out_edid) *out_edid = edid; diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 365de5dcc88..9a2b0d69b0a 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -86,6 +86,9 @@ static struct radeon_device_id radeon_workaround_list[] = { BUGFIX("Samsung P35", PCI_VENDOR_ID_SAMSUNG, 0xc00c, radeon_pm_off, radeon_reinitialize_M10), + BUGFIX("Acer Aspire 2010", + PCI_VENDOR_ID_AI, 0x0061, + radeon_pm_off, radeon_reinitialize_M10), { .ident = NULL } }; diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index f25d5d64833..ef5c16f7f5a 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -8,6 +8,7 @@ * <c.pellegrin@exadron.com> * * PM support added by Rodolfo Giometti <giometti@linux.it> + * Cursor enable/disable by Rodolfo Giometti <giometti@linux.it> * * Copyright 2002 MontaVista Software * Author: MontaVista Software, Inc. @@ -110,6 +111,10 @@ static struct fb_var_screeninfo au1100fb_var __initdata = { static struct au1100fb_drv_info drv_info; +static int nocursor = 0; +module_param(nocursor, int, 0644); +MODULE_PARM_DESC(nocursor, "cursor enable/disable"); + /* * Set hardware with var settings. This will enable the controller with a specific * mode, normally validated with the fb_check_var method @@ -422,6 +427,17 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) return 0; } +/* fb_cursor + * Used to disable cursor drawing... + */ +int au1100fb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) +{ + if (nocursor) + return 0; + else + return -EINVAL; /* just to force soft_cursor() call */ +} + static struct fb_ops au1100fb_ops = { .owner = THIS_MODULE, @@ -433,6 +449,7 @@ static struct fb_ops au1100fb_ops = .fb_imageblit = cfb_imageblit, .fb_rotate = au1100fb_fb_rotate, .fb_mmap = au1100fb_fb_mmap, + .fb_cursor = au1100fb_fb_cursor, }; @@ -677,7 +694,7 @@ int au1100fb_setup(char *options) if (options) { while ((this_opt = strsep(&options,",")) != NULL) { /* Panel option */ - if (!strncmp(this_opt, "panel:", 6)) { + if (!strncmp(this_opt, "panel:", 6)) { int i; this_opt += 6; for (i = 0; i < num_panels; i++) { @@ -685,13 +702,18 @@ int au1100fb_setup(char *options) known_lcd_panels[i].name, strlen(this_opt))) { panel_idx = i; - break; + break; + } } - } if (i >= num_panels) { print_warn("Panel %s not supported!", this_opt); } } + if (!strncmp(this_opt, "nocursor", 8)) { + this_opt += 8; + nocursor = 1; + print_info("Cursor disabled"); + } /* Mode option (only option that start with digit) */ else if (isdigit(this_opt[0])) { mode = kmalloc(strlen(this_opt) + 1, GFP_KERNEL); @@ -700,7 +722,7 @@ int au1100fb_setup(char *options) /* Unsupported option */ else { print_warn("Unsupported option \"%s\"", this_opt); - } + } } } diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 1b4f75d1f8a..8c041daa3a1 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -133,6 +133,7 @@ static int info_idx = -1; /* console rotation */ static int rotate; +static int fbcon_has_sysfs; static const struct consw fb_con; @@ -396,9 +397,8 @@ static void fb_flashcursor(void *private) vc = vc_cons[ops->currcon].d; if (!vc || !CON_IS_VISIBLE(vc) || - fbcon_is_inactive(vc, info) || registered_fb[con2fb_map[vc->vc_num]] != info || - vc_cons[ops->currcon].d->vc_deccm != 1) { + vc->vc_deccm != 1) { release_console_sem(); return; } @@ -2166,7 +2166,12 @@ static int fbcon_switch(struct vc_data *vc) fbcon_del_cursor_timer(old_info); } - fbcon_add_cursor_timer(info); + if (fbcon_is_inactive(vc, info) || + ops->blank_state != FB_BLANK_UNBLANK) + fbcon_del_cursor_timer(info); + else + fbcon_add_cursor_timer(info); + set_blitting_type(vc, info); ops->cursor_reset = 1; @@ -2276,10 +2281,11 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) update_screen(vc); } - if (!blank) - fbcon_add_cursor_timer(info); - else + if (fbcon_is_inactive(vc, info) || + ops->blank_state != FB_BLANK_UNBLANK) fbcon_del_cursor_timer(info); + else + fbcon_add_cursor_timer(info); return 0; } @@ -3161,11 +3167,26 @@ static struct class_device_attribute class_device_attrs[] = { static int fbcon_init_class_device(void) { - int i; + int i, error = 0; + + fbcon_has_sysfs = 1; + + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { + error = class_device_create_file(fbcon_class_device, + &class_device_attrs[i]); + + if (error) + break; + } + + if (error) { + while (--i >= 0) + class_device_remove_file(fbcon_class_device, + &class_device_attrs[i]); + + fbcon_has_sysfs = 0; + } - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_create_file(fbcon_class_device, - &class_device_attrs[i]); return 0; } @@ -3225,7 +3246,10 @@ static void fbcon_exit(void) module_put(info->fbops->owner); if (info->fbcon_par) { + struct fbcon_ops *ops = info->fbcon_par; + fbcon_del_cursor_timer(info); + kfree(ops->cursor_src); kfree(info->fbcon_par); info->fbcon_par = NULL; } @@ -3271,9 +3295,13 @@ static void __exit fbcon_deinit_class_device(void) { int i; - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_remove_file(fbcon_class_device, - &class_device_attrs[i]); + if (fbcon_has_sysfs) { + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) + class_device_remove_file(fbcon_class_device, + &class_device_attrs[i]); + + fbcon_has_sysfs = 0; + } } static void __exit fb_console_exit(void) diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h index f244ad066d6..b9386d168c0 100644 --- a/drivers/video/console/fbcon.h +++ b/drivers/video/console/fbcon.h @@ -80,6 +80,8 @@ struct fbcon_ops { char *cursor_data; u8 *fontbuffer; u8 *fontdata; + u8 *cursor_src; + u32 cursor_size; u32 fd_size; }; /* diff --git a/drivers/video/console/fbcon_ccw.c b/drivers/video/console/fbcon_ccw.c index 4481c80b8b2..825e6d6972a 100644 --- a/drivers/video/console/fbcon_ccw.c +++ b/drivers/video/console/fbcon_ccw.c @@ -391,7 +391,7 @@ static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode, ops->cursor_reset = 0; } -int ccw_update_start(struct fb_info *info) +static int ccw_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; u32 yoffset; diff --git a/drivers/video/console/fbcon_cw.c b/drivers/video/console/fbcon_cw.c index 7f92c06afea..c637e631880 100644 --- a/drivers/video/console/fbcon_cw.c +++ b/drivers/video/console/fbcon_cw.c @@ -375,7 +375,7 @@ static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode, ops->cursor_reset = 0; } -int cw_update_start(struct fb_info *info) +static int cw_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; u32 vxres = GETVXRES(ops->p->scrollmode, info); diff --git a/drivers/video/console/fbcon_ud.c b/drivers/video/console/fbcon_ud.c index ab91005e64d..1473506df5d 100644 --- a/drivers/video/console/fbcon_ud.c +++ b/drivers/video/console/fbcon_ud.c @@ -415,7 +415,7 @@ static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode, ops->cursor_reset = 0; } -int ud_update_start(struct fb_info *info) +static int ud_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; int xoffset, yoffset; diff --git a/drivers/video/console/softcursor.c b/drivers/video/console/softcursor.c index 557c563e4ae..7d07d838356 100644 --- a/drivers/video/console/softcursor.c +++ b/drivers/video/console/softcursor.c @@ -20,11 +20,12 @@ int soft_cursor(struct fb_info *info, struct fb_cursor *cursor) { + struct fbcon_ops *ops = info->fbcon_par; unsigned int scan_align = info->pixmap.scan_align - 1; unsigned int buf_align = info->pixmap.buf_align - 1; unsigned int i, size, dsize, s_pitch, d_pitch; struct fb_image *image; - u8 *dst, *src; + u8 *dst; if (info->state != FBINFO_STATE_RUNNING) return 0; @@ -32,11 +33,19 @@ int soft_cursor(struct fb_info *info, struct fb_cursor *cursor) s_pitch = (cursor->image.width + 7) >> 3; dsize = s_pitch * cursor->image.height; - src = kmalloc(dsize + sizeof(struct fb_image), GFP_ATOMIC); - if (!src) - return -ENOMEM; + if (dsize + sizeof(struct fb_image) != ops->cursor_size) { + if (ops->cursor_src != NULL) + kfree(ops->cursor_src); + ops->cursor_size = dsize + sizeof(struct fb_image); - image = (struct fb_image *) (src + dsize); + ops->cursor_src = kmalloc(ops->cursor_size, GFP_ATOMIC); + if (!ops->cursor_src) { + ops->cursor_size = 0; + return -ENOMEM; + } + } + + image = (struct fb_image *) (ops->cursor_src + dsize); *image = cursor->image; d_pitch = (s_pitch + scan_align) & ~scan_align; @@ -48,21 +57,23 @@ int soft_cursor(struct fb_info *info, struct fb_cursor *cursor) switch (cursor->rop) { case ROP_XOR: for (i = 0; i < dsize; i++) - src[i] = image->data[i] ^ cursor->mask[i]; + ops->cursor_src[i] = image->data[i] ^ + cursor->mask[i]; break; case ROP_COPY: default: for (i = 0; i < dsize; i++) - src[i] = image->data[i] & cursor->mask[i]; + ops->cursor_src[i] = image->data[i] & + cursor->mask[i]; break; } } else - memcpy(src, image->data, dsize); + memcpy(ops->cursor_src, image->data, dsize); - fb_pad_aligned_buffer(dst, d_pitch, src, s_pitch, image->height); + fb_pad_aligned_buffer(dst, d_pitch, ops->cursor_src, s_pitch, + image->height); image->data = dst; info->fbops->fb_imageblit(info, image); - kfree(src); return 0; } diff --git a/drivers/video/fb_ddc.c b/drivers/video/fb_ddc.c new file mode 100644 index 00000000000..3aa6ebf68f1 --- /dev/null +++ b/drivers/video/fb_ddc.c @@ -0,0 +1,116 @@ +/* + * driver/vide/fb_ddc.c - DDC/EDID read support. + * + * Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/fb.h> +#include <linux/i2c-algo-bit.h> + +#include "edid.h" + +#define DDC_ADDR 0x50 + +static unsigned char *fb_do_probe_ddc_edid(struct i2c_adapter *adapter) +{ + unsigned char start = 0x0; + struct i2c_msg msgs[] = { + { + .addr = DDC_ADDR, + .len = 1, + .buf = &start, + }, { + .addr = DDC_ADDR, + .flags = I2C_M_RD, + .len = EDID_LENGTH, + } + }; + unsigned char *buf; + + buf = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (!buf) { + dev_warn(&adapter->dev, "unable to allocate memory for EDID " + "block.\n"); + return NULL; + } + msgs[1].buf = buf; + + if (i2c_transfer(adapter, msgs, 2) == 2) + return buf; + + dev_warn(&adapter->dev, "unable to read EDID block.\n"); + kfree(buf); + return NULL; +} + +unsigned char *fb_ddc_read(struct i2c_adapter *adapter) +{ + struct i2c_algo_bit_data *algo_data = adapter->algo_data; + unsigned char *edid = NULL; + int i, j; + + algo_data->setscl(algo_data->data, 1); + algo_data->setscl(algo_data->data, 0); + + for (i = 0; i < 3; i++) { + /* For some old monitors we need the + * following process to initialize/stop DDC + */ + algo_data->setsda(algo_data->data, 0); + msleep(13); + + algo_data->setscl(algo_data->data, 1); + for (j = 0; j < 5; j++) { + msleep(10); + if (algo_data->getscl(algo_data->data)) + break; + } + if (j == 5) + continue; + + algo_data->setsda(algo_data->data, 0); + msleep(15); + algo_data->setscl(algo_data->data, 0); + msleep(15); + algo_data->setsda(algo_data->data, 1); + msleep(15); + + /* Do the real work */ + edid = fb_do_probe_ddc_edid(adapter); + algo_data->setsda(algo_data->data, 0); + algo_data->setscl(algo_data->data, 0); + msleep(15); + + algo_data->setscl(algo_data->data, 1); + for (j = 0; j < 10; j++) { + msleep(10); + if (algo_data->getscl(algo_data->data)) + break; + } + + algo_data->setsda(algo_data->data, 1); + msleep(15); + algo_data->setscl(algo_data->data, 0); + if (edid) + break; + } + /* Release the DDC lines when done or the Apple Cinema HD display + * will switch off + */ + algo_data->setsda(algo_data->data, 0); + algo_data->setscl(algo_data->data, 0); + + return edid; +} + +EXPORT_SYMBOL_GPL(fb_ddc_read); + +MODULE_AUTHOR("Dennis Munsie <dmunsie@cecropia.com>"); +MODULE_DESCRIPTION("DDC/EDID reading support"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 17961e3ecaa..93ffcdd95f5 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -554,7 +554,8 @@ static int fbmem_read_proc(char *buf, char **start, off_t offset, int clen; clen = 0; - for (fi = registered_fb; fi < ®istered_fb[FB_MAX] && len < 4000; fi++) + for (fi = registered_fb; fi < ®istered_fb[FB_MAX] && clen < 4000; + fi++) if (*fi) clen += sprintf(buf + clen, "%d %s\n", (*fi)->node, diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index c151dcf6878..d3a50417ed9 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -20,6 +20,8 @@ #include <linux/console.h> #include <linux/module.h> +#define FB_SYSFS_FLAG_ATTR 1 + /** * framebuffer_alloc - creates a new frame buffer info structure * @@ -483,12 +485,27 @@ static struct class_device_attribute class_device_attrs[] = { int fb_init_class_device(struct fb_info *fb_info) { - unsigned int i; + int i, error = 0; + class_set_devdata(fb_info->class_device, fb_info); - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_create_file(fb_info->class_device, - &class_device_attrs[i]); + fb_info->class_flag |= FB_SYSFS_FLAG_ATTR; + + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { + error = class_device_create_file(fb_info->class_device, + &class_device_attrs[i]); + + if (error) + break; + } + + if (error) { + while (--i >= 0) + class_device_remove_file(fb_info->class_device, + &class_device_attrs[i]); + fb_info->class_flag &= ~FB_SYSFS_FLAG_ATTR; + } + return 0; } @@ -496,9 +513,13 @@ void fb_cleanup_class_device(struct fb_info *fb_info) { unsigned int i; - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_remove_file(fb_info->class_device, - &class_device_attrs[i]); + if (fb_info->class_flag & FB_SYSFS_FLAG_ATTR) { + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) + class_device_remove_file(fb_info->class_device, + &class_device_attrs[i]); + + fb_info->class_flag &= ~FB_SYSFS_FLAG_ATTR; + } } #ifdef CONFIG_FB_BACKLIGHT diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index 7d06b38e80a..b38d805db31 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -19,7 +19,6 @@ #include "i810_main.h" #include "../edid.h" -#define I810_DDC 0x50 /* bit locations in the registers */ #define SCL_DIR_MASK 0x0001 #define SCL_DIR 0x0002 @@ -150,53 +149,14 @@ void i810_delete_i2c_busses(struct i810fb_par *par) par->chan[2].par = NULL; } -static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan) -{ - u8 start = 0x0; - struct i2c_msg msgs[] = { - { - .addr = I810_DDC, - .len = 1, - .buf = &start, - }, { - .addr = I810_DDC, - .flags = I2C_M_RD, - .len = EDID_LENGTH, - }, - }; - u8 *buf; - - buf = kmalloc(EDID_LENGTH, GFP_KERNEL); - if (!buf) { - DPRINTK("i810-i2c: Failed to allocate memory\n"); - return NULL; - } - msgs[1].buf = buf; - - if (i2c_transfer(&chan->adapter, msgs, 2) == 2) { - DPRINTK("i810-i2c: I2C Transfer successful\n"); - return buf; - } - - DPRINTK("i810-i2c: Unable to read EDID block.\n"); - kfree(buf); - return NULL; -} - int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn) { struct i810fb_par *par = info->par; u8 *edid = NULL; - int i; DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn+1); if (conn < par->ddc_num) { - for (i = 0; i < 3; i++) { - /* Do the real work */ - edid = i810_do_probe_i2c_edid(&par->chan[conn]); - if (edid) - break; - } + edid = fb_ddc_read(&par->chan[conn].adapter); } else { const u8 *e = fb_firmware_edid(info->device); diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index d42edaccb84..b55a12d95eb 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -1602,7 +1602,10 @@ static int i810fb_resume(struct pci_dev *dev) acquire_console_sem(); pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); - pci_enable_device(dev); + + if (pci_enable_device(dev)) + goto fail; + pci_set_master(dev); agp_bind_memory(par->i810_gtt.i810_fb_memory, par->fb.offset); @@ -1611,6 +1614,7 @@ static int i810fb_resume(struct pci_dev *dev) i810fb_set_par(info); fb_set_suspend (info, 0); info->fbops->fb_blank(VESA_NO_BLANKING, info); +fail: release_console_sem(); return 0; } diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 4a57dabb77d..7acf01c181e 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -2277,10 +2277,13 @@ static void __init matroxfb_init_params(void) { } } -static void __init matrox_init(void) { +static int __init matrox_init(void) { + int err; + matroxfb_init_params(); - pci_register_driver(&matroxfb_driver); + err = pci_register_driver(&matroxfb_driver); dev = -1; /* accept all new devices... */ + return err; } /* **************************** exit-time only **************************** */ @@ -2437,6 +2440,7 @@ static int __initdata initialized = 0; static int __init matroxfb_init(void) { char *option = NULL; + int err = 0; DBG(__FUNCTION__) @@ -2448,11 +2452,11 @@ static int __init matroxfb_init(void) return -ENXIO; if (!initialized) { initialized = 1; - matrox_init(); + err = matrox_init(); } hotplug = 1; /* never return failure, user can hotplug matrox later... */ - return 0; + return err; } module_init(matroxfb_init); diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c index 6849ab75d40..a32d1af79e0 100644 --- a/drivers/video/mbx/mbxfb.c +++ b/drivers/video/mbx/mbxfb.c @@ -118,8 +118,19 @@ static unsigned int mbxfb_get_pixclock(unsigned int pixclock_ps, /* convert pixclock to KHz */ pixclock = PICOS2KHZ(pixclock_ps); + /* PLL output freq = (ref_clk * M) / (N * 2^P) + * + * M: 1 to 63 + * N: 1 to 7 + * P: 0 to 7 + */ + + /* RAPH: When N==1, the resulting pixel clock appears to + * get divided by 2. Preventing N=1 by starting the following + * loop at 2 prevents this. Is this a bug with my chip + * revision or something I dont understand? */ for (m = 1; m < 64; m++) { - for (n = 1; n < 8; n++) { + for (n = 2; n < 8; n++) { for (p = 0; p < 8; p++) { clk = (ref_clk * m) / (n * (1 << p)); err = (clk > pixclock) ? (clk - pixclock) : @@ -244,8 +255,8 @@ static int mbxfb_set_par(struct fb_info *info) /* setup resolution */ gsctrl &= ~(FMsk(GSCTRL_GSWIDTH) | FMsk(GSCTRL_GSHEIGHT)); - gsctrl |= Gsctrl_Width(info->var.xres - 1) | - Gsctrl_Height(info->var.yres - 1); + gsctrl |= Gsctrl_Width(info->var.xres) | + Gsctrl_Height(info->var.yres); writel(gsctrl, GSCTRL); udelay(1000); @@ -402,8 +413,8 @@ static void __devinit setup_graphics(struct fb_info *fbi) { unsigned long gsctrl; - gsctrl = GSCTRL_GAMMA_EN | Gsctrl_Width(fbi->var.xres - 1) | - Gsctrl_Height(fbi->var.yres - 1); + gsctrl = GSCTRL_GAMMA_EN | Gsctrl_Width(fbi->var.xres) | + Gsctrl_Height(fbi->var.yres); switch (fbi->var.bits_per_pixel) { case 16: if (fbi->var.green.length == 5) diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index 19eef3a0902..e48de3c9fd1 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -160,51 +160,12 @@ void nvidia_delete_i2c_busses(struct nvidia_par *par) } -static u8 *nvidia_do_probe_i2c_edid(struct nvidia_i2c_chan *chan) -{ - u8 start = 0x0; - struct i2c_msg msgs[] = { - { - .addr = 0x50, - .len = 1, - .buf = &start, - }, { - .addr = 0x50, - .flags = I2C_M_RD, - .len = EDID_LENGTH, - }, - }; - u8 *buf; - - if (!chan->par) - return NULL; - - buf = kmalloc(EDID_LENGTH, GFP_KERNEL); - if (!buf) { - dev_warn(&chan->par->pci_dev->dev, "Out of memory!\n"); - return NULL; - } - msgs[1].buf = buf; - - if (i2c_transfer(&chan->adapter, msgs, 2) == 2) - return buf; - dev_dbg(&chan->par->pci_dev->dev, "Unable to read EDID block.\n"); - kfree(buf); - return NULL; -} - int nvidia_probe_i2c_connector(struct fb_info *info, int conn, u8 **out_edid) { struct nvidia_par *par = info->par; - u8 *edid = NULL; - int i; - - for (i = 0; i < 3; i++) { - /* Do the real work */ - edid = nvidia_do_probe_i2c_edid(&par->chan[conn - 1]); - if (edid) - break; - } + u8 *edid; + + edid = fb_ddc_read(&par->chan[conn - 1].adapter); if (!edid && conn == 1) { /* try to get from firmware */ diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index f8cd4c519ae..eb24107bcc8 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -28,6 +28,9 @@ #include <asm/prom.h> #include <asm/pci-bridge.h> #endif +#ifdef CONFIG_BOOTX_TEXT +#include <asm/btext.h> +#endif #include "nv_local.h" #include "nv_type.h" @@ -681,6 +684,13 @@ static int nvidiafb_set_par(struct fb_info *info) nvidia_vga_protect(par, 0); +#ifdef CONFIG_BOOTX_TEXT + /* Update debug text engine */ + btext_update_display(info->fix.smem_start, + info->var.xres, info->var.yres, + info->var.bits_per_pixel, info->fix.line_length); +#endif + NVTRACE_LEAVE(); return 0; } @@ -984,7 +994,10 @@ static int nvidiafb_resume(struct pci_dev *dev) if (par->pm_state != PM_EVENT_FREEZE) { pci_restore_state(dev); - pci_enable_device(dev); + + if (pci_enable_device(dev)) + goto fail; + pci_set_master(dev); } @@ -993,6 +1006,7 @@ static int nvidiafb_resume(struct pci_dev *dev) fb_set_suspend (info, 0); nvidiafb_blank(FB_BLANK_UNBLANK, info); +fail: release_console_sem(); return 0; } diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c index 4acde4f7dbf..b120896c8ab 100644 --- a/drivers/video/riva/fbdev.c +++ b/drivers/video/riva/fbdev.c @@ -393,8 +393,8 @@ static void riva_bl_init(struct riva_par *par) mutex_lock(&info->bl_mutex); info->bl_dev = bd; fb_bl_default_curve(info, 0, - 0x158 * FB_BACKLIGHT_MAX / MAX_LEVEL, - 0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL); + MIN_LEVEL * FB_BACKLIGHT_MAX / MAX_LEVEL, + FB_BACKLIGHT_MAX); mutex_unlock(&info->bl_mutex); down(&bd->sem); @@ -784,7 +784,7 @@ static void riva_load_video_mode(struct fb_info *info) NVTRACE_ENTER(); /* time to calculate */ - rivafb_blank(1, info); + rivafb_blank(FB_BLANK_NORMAL, info); bpp = info->var.bits_per_pixel; if (bpp == 16 && info->var.green.length == 5) @@ -917,7 +917,7 @@ static void riva_load_video_mode(struct fb_info *info) par->current_state = newmode; riva_load_state(par, &par->current_state); par->riva.LockUnlock(&par->riva, 0); /* important for HW cursor */ - rivafb_blank(0, info); + rivafb_blank(FB_BLANK_UNBLANK, info); NVTRACE_LEAVE(); } diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c index 9751c37c0bf..c15b259af64 100644 --- a/drivers/video/riva/rivafb-i2c.c +++ b/drivers/video/riva/rivafb-i2c.c @@ -25,8 +25,6 @@ #include "rivafb.h" #include "../edid.h" -#define RIVA_DDC 0x50 - static void riva_gpio_setscl(void* data, int state) { struct riva_i2c_chan *chan = data; @@ -158,50 +156,12 @@ void riva_delete_i2c_busses(struct riva_par *par) par->chan[2].par = NULL; } -static u8 *riva_do_probe_i2c_edid(struct riva_i2c_chan *chan) -{ - u8 start = 0x0; - struct i2c_msg msgs[] = { - { - .addr = RIVA_DDC, - .len = 1, - .buf = &start, - }, { - .addr = RIVA_DDC, - .flags = I2C_M_RD, - .len = EDID_LENGTH, - }, - }; - u8 *buf; - - if (!chan->par) - return NULL; - - buf = kmalloc(EDID_LENGTH, GFP_KERNEL); - if (!buf) { - dev_warn(&chan->par->pdev->dev, "Out of memory!\n"); - return NULL; - } - msgs[1].buf = buf; - - if (i2c_transfer(&chan->adapter, msgs, 2) == 2) - return buf; - dev_dbg(&chan->par->pdev->dev, "Unable to read EDID block.\n"); - kfree(buf); - return NULL; -} - int riva_probe_i2c_connector(struct riva_par *par, int conn, u8 **out_edid) { u8 *edid = NULL; - int i; - for (i = 0; i < 3; i++) { - /* Do the real work */ - edid = riva_do_probe_i2c_edid(&par->chan[conn-1]); - if (edid) - break; - } + edid = fb_ddc_read(&par->chan[conn-1].adapter); + if (out_edid) *out_edid = edid; if (!edid) diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index d7d810dbf0b..3f94223b7f0 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -213,52 +213,15 @@ void savagefb_delete_i2c_busses(struct fb_info *info) par->chan.par = NULL; } -static u8 *savage_do_probe_i2c_edid(struct savagefb_i2c_chan *chan) -{ - u8 start = 0x0; - struct i2c_msg msgs[] = { - { - .addr = SAVAGE_DDC, - .len = 1, - .buf = &start, - }, { - .addr = SAVAGE_DDC, - .flags = I2C_M_RD, - .len = EDID_LENGTH, - }, - }; - u8 *buf = NULL; - - if (chan->par) { - buf = kmalloc(EDID_LENGTH, GFP_KERNEL); - - if (buf) { - msgs[1].buf = buf; - - if (i2c_transfer(&chan->adapter, msgs, 2) != 2) { - dev_dbg(&chan->par->pcidev->dev, - "Unable to read EDID block.\n"); - kfree(buf); - buf = NULL; - } - } - } - - return buf; -} - int savagefb_probe_i2c_connector(struct fb_info *info, u8 **out_edid) { struct savagefb_par *par = info->par; - u8 *edid = NULL; - int i; - - for (i = 0; i < 3; i++) { - /* Do the real work */ - edid = savage_do_probe_i2c_edid(&par->chan); - if (edid) - break; - } + u8 *edid; + + if (par->chan.par) + edid = fb_ddc_read(&par->chan.adapter); + else + edid = NULL; if (!edid) { /* try to get from firmware */ diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h index 7ecab87cef0..59d12844b4d 100644 --- a/drivers/video/sis/init.h +++ b/drivers/video/sis/init.h @@ -77,16 +77,9 @@ #include <linux/types.h> #include <asm/io.h> #include <linux/fb.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <video/fbcon.h> -#endif #include "sis.h" -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <linux/sisfb.h> -#else #include <video/sisfb.h> #endif -#endif /* Mode numbers */ static const unsigned short ModeIndex_320x200[] = {0x59, 0x41, 0x00, 0x4f}; diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h index bc321dc57e9..4f3a28699d3 100644 --- a/drivers/video/sis/init301.h +++ b/drivers/video/sis/init301.h @@ -71,16 +71,9 @@ #include <linux/types.h> #include <asm/io.h> #include <linux/fb.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <video/fbcon.h> -#endif #include "sis.h" -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <linux/sisfb.h> -#else #include <video/sisfb.h> #endif -#endif static const unsigned char SiS_YPbPrTable[3][64] = { { diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/sis/initextlfb.c index 09f5d758b6c..c3884a29f4c 100644 --- a/drivers/video/sis/initextlfb.c +++ b/drivers/video/sis/initextlfb.c @@ -34,12 +34,10 @@ #include <linux/types.h> #include <linux/fb.h> -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) int sisfb_mode_rate_to_dclock(struct SiS_Private *SiS_Pr, unsigned char modeno, unsigned char rateindex); int sisfb_mode_rate_to_ddata(struct SiS_Private *SiS_Pr, unsigned char modeno, unsigned char rateindex, struct fb_var_screeninfo *var); -#endif BOOLEAN sisfb_gettotalfrommode(struct SiS_Private *SiS_Pr, unsigned char modeno, int *htotal, int *vtotal, unsigned char rateindex); @@ -49,7 +47,6 @@ extern BOOLEAN SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *Mode extern void SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres, int yres, struct fb_var_screeninfo *var, BOOLEAN writeres); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) int sisfb_mode_rate_to_dclock(struct SiS_Private *SiS_Pr, unsigned char modeno, unsigned char rateindex) @@ -177,7 +174,6 @@ sisfb_mode_rate_to_ddata(struct SiS_Private *SiS_Pr, unsigned char modeno, return 1; } -#endif /* Linux >= 2.5 */ BOOLEAN sisfb_gettotalfrommode(struct SiS_Private *SiS_Pr, unsigned char modeno, int *htotal, diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h index f59568020eb..d048bd39961 100644 --- a/drivers/video/sis/osdef.h +++ b/drivers/video/sis/osdef.h @@ -100,11 +100,7 @@ #define SIS315H #endif -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #define SIS_LINUX_KERNEL_26 -#else -#define SIS_LINUX_KERNEL_24 -#endif #if !defined(SIS300) && !defined(SIS315H) #warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/sis/sis_accel.c index 3b7ce032e2e..7addf91d2fe 100644 --- a/drivers/video/sis/sis_accel.c +++ b/drivers/video/sis/sis_accel.c @@ -32,22 +32,10 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/fb.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <linux/console.h> -#endif #include <linux/ioport.h> #include <linux/types.h> - #include <asm/io.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <video/fbcon.h> -#include <video/fbcon-cfb8.h> -#include <video/fbcon-cfb16.h> -#include <video/fbcon-cfb24.h> -#include <video/fbcon-cfb32.h> -#endif - #include "sis.h" #include "sis_accel.h" @@ -91,11 +79,9 @@ static const u8 sisPatALUConv[] = 0xFF, /* dest = 0xFF; 1, GXset, 0xF */ }; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34) static const int myrops[] = { 3, 10, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }; -#endif /* 300 series ----------------------------------------------------- */ #ifdef CONFIG_FB_SIS_300 @@ -315,8 +301,6 @@ void sisfb_syncaccel(struct sis_video_info *ivideo) } } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) /* --------------- 2.5 --------------- */ - int fbcon_sis_sync(struct fb_info *info) { struct sis_video_info *ivideo = (struct sis_video_info *)info->par; @@ -438,13 +422,3 @@ void fbcon_sis_copyarea(struct fb_info *info, const struct fb_copyarea *area) sisfb_syncaccel(ivideo); } - -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) /* -------------- 2.4 --------------- */ - -#include "sisfb_accel_2_4.h" - -#endif /* KERNEL VERSION */ - - diff --git a/drivers/video/sis/sis_accel.h b/drivers/video/sis/sis_accel.h index 046e2c4a8e0..30e03cdf6b8 100644 --- a/drivers/video/sis/sis_accel.h +++ b/drivers/video/sis/sis_accel.h @@ -390,25 +390,11 @@ MMIO_OUT32(ivideo->mmio_vbase, FIRE_TRIGGER, 0); \ CmdQueLen -= 2; - int sisfb_initaccel(struct sis_video_info *ivideo); void sisfb_syncaccel(struct sis_video_info *ivideo); -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33) -void fbcon_sis_bmove(struct display *p, int srcy, int srcx, int dsty, - int dstx, int height, int width); -void fbcon_sis_revc(struct display *p, int srcy, int srcx); -void fbcon_sis_clear8(struct vc_data *conp, struct display *p, int srcy, - int srcx, int height, int width); -void fbcon_sis_clear16(struct vc_data *conp, struct display *p, int srcy, - int srcx, int height, int width); -void fbcon_sis_clear32(struct vc_data *conp, struct display *p, int srcy, - int srcx, int height, int width); -#endif -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34) int fbcon_sis_sync(struct fb_info *info); void fbcon_sis_fillrect(struct fb_info *info, const struct fb_fillrect *rect); void fbcon_sis_copyarea(struct fb_info *info, const struct fb_copyarea *area); -#endif #endif diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 895ebda7d9e..baaf495a0a6 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -35,9 +35,7 @@ #include <linux/version.h> #include <linux/module.h> -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #include <linux/moduleparam.h> -#endif #include <linux/kernel.h> #include <linux/smp_lock.h> #include <linux/spinlock.h> @@ -58,9 +56,6 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/vmalloc.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <linux/vt_kern.h> -#endif #include <linux/capability.h> #include <linux/fs.h> #include <linux/types.h> @@ -70,35 +65,9 @@ #include <asm/mtrr.h> #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include <video/fbcon.h> -#include <video/fbcon-cfb8.h> -#include <video/fbcon-cfb16.h> -#include <video/fbcon-cfb24.h> -#include <video/fbcon-cfb32.h> -#endif - #include "sis.h" #include "sis_main.h" -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) -#error "This version of sisfb requires at least 2.6.3" -#endif -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#ifdef FBCON_HAS_CFB8 -extern struct display_switch fbcon_sis8; -#endif -#ifdef FBCON_HAS_CFB16 -extern struct display_switch fbcon_sis16; -#endif -#ifdef FBCON_HAS_CFB32 -extern struct display_switch fbcon_sis32; -#endif -#endif - static void sisfb_handle_command(struct sis_video_info *ivideo, struct sisfb_cmd *sisfb_command); @@ -114,17 +83,7 @@ sisfb_setdefaultparms(void) sisfb_max = -1; sisfb_userom = -1; sisfb_useoem = -1; -#ifdef MODULE - /* Module: "None" for 2.4, default mode for 2.5+ */ -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - sisfb_mode_idx = -1; -#else - sisfb_mode_idx = MODE_INDEX_NONE; -#endif -#else - /* Static: Default mode */ sisfb_mode_idx = -1; -#endif sisfb_parm_rate = -1; sisfb_crt1off = 0; sisfb_forcecrt1 = -1; @@ -142,10 +101,6 @@ sisfb_setdefaultparms(void) sisfb_tvxposoffset = 0; sisfb_tvyposoffset = 0; sisfb_nocrt2rate = 0; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - sisfb_inverse = 0; - sisfb_fontname[0] = 0; -#endif #if !defined(__i386__) && !defined(__x86_64__) sisfb_resetcard = 0; sisfb_videoram = 0; @@ -162,14 +117,11 @@ sisfb_search_vesamode(unsigned int vesamode, BOOLEAN quiet) /* We don't know the hardware specs yet and there is no ivideo */ if(vesamode == 0) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - sisfb_mode_idx = MODE_INDEX_NONE; -#else if(!quiet) printk(KERN_ERR "sisfb: Invalid mode. Using default.\n"); sisfb_mode_idx = DEFAULT_MODE; -#endif + return; } @@ -215,7 +167,6 @@ sisfb_search_mode(char *name, BOOLEAN quiet) return; } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) if(!strnicmp(name, sisbios_mode[MODE_INDEX_NONE].name, strlen(name))) { if(!quiet) printk(KERN_ERR "sisfb: Mode 'none' not supported anymore. Using default.\n"); @@ -223,7 +174,7 @@ sisfb_search_mode(char *name, BOOLEAN quiet) sisfb_mode_idx = DEFAULT_MODE; return; } -#endif + if(strlen(name) <= 19) { strcpy(strbuf1, name); for(i = 0; i < strlen(strbuf1); i++) { @@ -1315,20 +1266,7 @@ sisfb_do_set_var(struct fb_var_screeninfo *var, int isactive, struct fb_info *in ivideo->refresh_rate = 60; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - if(ivideo->sisfb_thismonitor.datavalid) { - if(!sisfb_verify_rate(ivideo, &ivideo->sisfb_thismonitor, ivideo->sisfb_mode_idx, - ivideo->rate_idx, ivideo->refresh_rate)) { - printk(KERN_INFO "sisfb: WARNING: Refresh rate exceeds monitor specs!\n"); - } - } -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - if(((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) && isactive) { -#else if(isactive) { -#endif /* If acceleration to be used? Need to know * before pre/post_set_mode() */ @@ -1367,9 +1305,7 @@ sisfb_do_set_var(struct fb_var_screeninfo *var, int isactive, struct fb_info *in ivideo->current_linelength = ivideo->video_linelength; ivideo->current_pixclock = var->pixclock; ivideo->current_refresh_rate = ivideo->refresh_rate; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ivideo->sisfb_lastrates[ivideo->mode_no] = ivideo->refresh_rate; -#endif } return 0; @@ -1435,18 +1371,6 @@ sisfb_pan_var(struct sis_video_info *ivideo, struct fb_var_screeninfo *var) return 0; } -/* ------------ FBDev related routines for 2.4 series ----------- */ - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - -#include "sisfb_fbdev_2_4.h" - -#endif - -/* ------------ FBDev related routines for 2.6 series ----------- */ - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - static int sisfb_open(struct fb_info *info, int user) { @@ -1744,8 +1668,6 @@ sisfb_blank(int blank, struct fb_info *info) return sisfb_myblank(ivideo, blank); } -#endif - /* ----------- FBDev related routines for all series ---------- */ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) @@ -1969,20 +1891,6 @@ sisfb_get_fix(struct fb_fix_screeninfo *fix, int con, struct fb_info *info) /* ---------------- fb_ops structures ----------------- */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -static struct fb_ops sisfb_ops = { - .owner = THIS_MODULE, - .fb_get_fix = sisfb_get_fix, - .fb_get_var = sisfb_get_var, - .fb_set_var = sisfb_set_var, - .fb_get_cmap = sisfb_get_cmap, - .fb_set_cmap = sisfb_set_cmap, - .fb_pan_display = sisfb_pan_display, - .fb_ioctl = sisfb_ioctl -}; -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) static struct fb_ops sisfb_ops = { .owner = THIS_MODULE, .fb_open = sisfb_open, @@ -2004,7 +1912,6 @@ static struct fb_ops sisfb_ops = { #endif .fb_ioctl = sisfb_ioctl }; -#endif /* ---------------- Chip generation dependent routines ---------------- */ @@ -4100,16 +4007,6 @@ sisfb_setup(char *options) sisfb_search_mode(this_opt + 5, FALSE); } else if(!strnicmp(this_opt, "vesa:", 5)) { sisfb_search_vesamode(simple_strtoul(this_opt + 5, NULL, 0), FALSE); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - } else if(!strnicmp(this_opt, "inverse", 7)) { - sisfb_inverse = 1; - /* fb_invert_cmaps(); */ - } else if(!strnicmp(this_opt, "font:", 5)) { - if(strlen(this_opt + 5) < 40) { - strncpy(sisfb_fontname, this_opt + 5, sizeof(sisfb_fontname) - 1); - sisfb_fontname[sizeof(sisfb_fontname) - 1] = '\0'; - } -#endif } else if(!strnicmp(this_opt, "rate:", 5)) { sisfb_parm_rate = simple_strtoul(this_opt + 5, NULL, 0); } else if(!strnicmp(this_opt, "forcecrt1:", 10)) { @@ -5870,17 +5767,9 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if(sisfb_off) return -ENXIO; -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3)) sis_fb_info = framebuffer_alloc(sizeof(*ivideo), &pdev->dev); if(!sis_fb_info) return -ENOMEM; -#else - sis_fb_info = kmalloc(sizeof(*sis_fb_info) + sizeof(*ivideo), GFP_KERNEL); - if(!sis_fb_info) - return -ENOMEM; - memset(sis_fb_info, 0, sizeof(*sis_fb_info) + sizeof(*ivideo)); - sis_fb_info->par = ((char *)sis_fb_info + sizeof(*sis_fb_info)); -#endif ivideo = (struct sis_video_info *)sis_fb_info->par; ivideo->memyselfandi = sis_fb_info; @@ -5970,10 +5859,6 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ivideo->tvxpos = sisfb_tvxposoffset; ivideo->tvypos = sisfb_tvyposoffset; ivideo->sisfb_nocrt2rate = sisfb_nocrt2rate; -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,0) - ivideo->sisfb_inverse = sisfb_inverse; -#endif - ivideo->refresh_rate = 0; if(ivideo->sisfb_parm_rate != -1) { ivideo->refresh_rate = ivideo->sisfb_parm_rate; @@ -6049,10 +5934,6 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - strcpy(sis_fb_info->modename, ivideo->myid); -#endif - ivideo->SiS_Pr.ChipType = ivideo->chip; ivideo->SiS_Pr.ivideo = (void *)ivideo; @@ -6134,20 +6015,6 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #endif } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#ifdef MODULE - if((reg & 0x80) && (reg != 0xff)) { - if((sisbios_mode[ivideo->sisfb_mode_idx].mode_no[ivideo->mni]) - != 0xFF) { - printk(KERN_INFO "sisfb: Cannot initialize display mode, " - "X server is active\n"); - ret = -EBUSY; - goto error_4; - } - } -#endif -#endif - /* Search and copy ROM image */ ivideo->bios_abase = NULL; ivideo->SiS_Pr.VirtualRomBase = NULL; @@ -6281,9 +6148,6 @@ error_0: iounmap(ivideo->video_vbase); error_1: release_mem_region(ivideo->video_base, ivideo->video_size); error_2: release_mem_region(ivideo->mmio_base, ivideo->mmio_size); error_3: vfree(ivideo->bios_abase); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -error_4: -#endif if(ivideo->lpcdev) SIS_PCI_PUT_DEVICE(ivideo->lpcdev); if(ivideo->nbridge) @@ -6586,7 +6450,6 @@ error_4: sis_fb_info->fix = ivideo->sisfb_fix; sis_fb_info->screen_base = ivideo->video_vbase + ivideo->video_offset; sis_fb_info->fbops = &sisfb_ops; - sisfb_get_fix(&sis_fb_info->fix, -1, sis_fb_info); sis_fb_info->pseudo_palette = ivideo->pseudo_palette; @@ -6603,10 +6466,6 @@ error_4: } #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - vc_resize_con(1, 1, 0); -#endif - if(register_framebuffer(sis_fb_info) < 0) { printk(KERN_ERR "sisfb: Fatal error: Failed to register framebuffer\n"); ret = -EINVAL; @@ -6653,12 +6512,7 @@ error_4: printk(KERN_INFO "fb%d: %s frame buffer device version %d.%d.%d\n", -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - GET_FB_IDX(sis_fb_info->node), -#else - sis_fb_info->node, -#endif - ivideo->myid, VER_MAJOR, VER_MINOR, VER_LEVEL); + sis_fb_info->node, ivideo->myid, VER_MAJOR, VER_MINOR, VER_LEVEL); printk(KERN_INFO "sisfb: Copyright (C) 2001-2005 Thomas Winischhofer\n"); @@ -6732,11 +6586,7 @@ static void __devexit sisfb_remove(struct pci_dev *pdev) /* Unregister the framebuffer */ if(ivideo->registered) { unregister_framebuffer(sis_fb_info); -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3)) framebuffer_release(sis_fb_info); -#else - kfree(sis_fb_info); -#endif } /* OK, our ivideo is gone for good from here. */ @@ -6762,7 +6612,6 @@ static struct pci_driver sisfb_driver = { SISINITSTATIC int __init sisfb_init(void) { -#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8) #ifndef MODULE char *options = NULL; @@ -6771,15 +6620,12 @@ SISINITSTATIC int __init sisfb_init(void) sisfb_setup(options); #endif -#endif return pci_register_driver(&sisfb_driver); } -#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8) #ifndef MODULE module_init(sisfb_init); #endif -#endif /*****************************************************/ /* MODULE */ @@ -6799,9 +6645,6 @@ static int pdc1 = -1; static int noaccel = -1; static int noypan = -1; static int nomax = -1; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -static int inverse = 0; -#endif static int userom = -1; static int useoem = -1; static char *tvstandard = NULL; @@ -6861,10 +6704,6 @@ static int __init sisfb_init_module(void) else if(nomax == 0) sisfb_max = 1; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - if(inverse) sisfb_inverse = 1; -#endif - if(mem) sisfb_parm_mem = mem; @@ -6913,35 +6752,6 @@ MODULE_DESCRIPTION("SiS 300/540/630/730/315/55x/65x/661/74x/330/76x/34x, XGI V3X MODULE_LICENSE("GPL"); MODULE_AUTHOR("Thomas Winischhofer <thomas@winischhofer.net>, Others"); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -MODULE_PARM(mem, "i"); -MODULE_PARM(noaccel, "i"); -MODULE_PARM(noypan, "i"); -MODULE_PARM(nomax, "i"); -MODULE_PARM(userom, "i"); -MODULE_PARM(useoem, "i"); -MODULE_PARM(mode, "s"); -MODULE_PARM(vesa, "i"); -MODULE_PARM(rate, "i"); -MODULE_PARM(forcecrt1, "i"); -MODULE_PARM(forcecrt2type, "s"); -MODULE_PARM(scalelcd, "i"); -MODULE_PARM(pdc, "i"); -MODULE_PARM(pdc1, "i"); -MODULE_PARM(specialtiming, "s"); -MODULE_PARM(lvdshl, "i"); -MODULE_PARM(tvstandard, "s"); -MODULE_PARM(tvxposoffset, "i"); -MODULE_PARM(tvyposoffset, "i"); -MODULE_PARM(nocrt2rate, "i"); -MODULE_PARM(inverse, "i"); -#if !defined(__i386__) && !defined(__x86_64__) -MODULE_PARM(resetcard, "i"); -MODULE_PARM(videoram, "i"); -#endif -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) module_param(mem, int, 0); module_param(noaccel, int, 0); module_param(noypan, int, 0); @@ -6966,18 +6776,7 @@ module_param(nocrt2rate, int, 0); module_param(resetcard, int, 0); module_param(videoram, int, 0); #endif -#endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -MODULE_PARM_DESC(mem, - "\nDetermines the beginning of the video memory heap in KB. This heap is used\n" - "for video RAM management for eg. DRM/DRI. On 300 series, the default depends\n" - "on the amount of video RAM available. If 8MB of video RAM or less is available,\n" - "the heap starts at 4096KB, if between 8 and 16MB are available at 8192KB,\n" - "otherwise at 12288KB. On 315/330/340 series, the heap size is 32KB by default.\n" - "The value is to be specified without 'KB' and must match the MaxXFBMem setting\n" - "for XFree86 4.x/X.org 6.7 and later.\n"); -#else MODULE_PARM_DESC(mem, "\nDetermines the beginning of the video memory heap in KB. This heap is used\n" "for video RAM management for eg. DRM/DRI. On 300 series, the default depends\n" @@ -6985,7 +6784,6 @@ MODULE_PARM_DESC(mem, "the heap starts at 4096KB, if between 8 and 16MB are available at 8192KB,\n" "otherwise at 12288KB. On 315/330/340 series, the heap size is 32KB by default.\n" "The value is to be specified without 'KB'.\n"); -#endif MODULE_PARM_DESC(noaccel, "\nIf set to anything other than 0, 2D acceleration will be disabled.\n" @@ -7002,23 +6800,6 @@ MODULE_PARM_DESC(nomax, "enable the user to positively specify a virtual Y size of the screen using\n" "fbset. (default: 0)\n"); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -MODULE_PARM_DESC(mode, - "\nSelects the desired display mode in the format [X]x[Y]x[Depth], eg.\n" - "1024x768x16. Other formats supported include XxY-Depth and\n" - "XxY-Depth@Rate. If the parameter is only one (decimal or hexadecimal)\n" - "number, it will be interpreted as a VESA mode number. (default: none if\n" - "sisfb is a module; this leaves the console untouched and the driver will\n" - "only do the video memory management for eg. DRM/DRI; 800x600x8 if sisfb\n" - "is in the kernel)\n"); -MODULE_PARM_DESC(vesa, - "\nSelects the desired display mode by VESA defined mode number, eg. 0x117\n" - "(default: 0x0000 if sisfb is a module; this leaves the console untouched\n" - "and the driver will only do the video memory management for eg. DRM/DRI;\n" - "0x0103 if sisfb is in the kernel)\n"); -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) MODULE_PARM_DESC(mode, "\nSelects the desired default display mode in the format XxYxDepth,\n" "eg. 1024x768x16. Other formats supported include XxY-Depth and\n" @@ -7028,7 +6809,6 @@ MODULE_PARM_DESC(mode, MODULE_PARM_DESC(vesa, "\nSelects the desired default display mode by VESA defined mode number, eg.\n" "0x117 (default: 0x0103)\n"); -#endif MODULE_PARM_DESC(rate, "\nSelects the desired vertical refresh rate for CRT1 (external VGA) in Hz.\n" @@ -7094,12 +6874,6 @@ MODULE_PARM_DESC(nocrt2rate, "\nSetting this to 1 will force the driver to use the default refresh rate for\n" "CRT2 if CRT2 type is VGA. (default: 0, use same rate as CRT1)\n"); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -MODULE_PARM_DESC(inverse, - "\nSetting this to anything but 0 should invert the display colors, but this\n" - "does not seem to work. (default: 0)\n"); -#endif - #if !defined(__i386__) && !defined(__x86_64__) #ifdef CONFIG_FB_SIS_300 MODULE_PARM_DESC(resetcard, diff --git a/drivers/video/sis/sis_main.h b/drivers/video/sis/sis_main.h index 70b6df371b8..88e4f1e4147 100644 --- a/drivers/video/sis/sis_main.h +++ b/drivers/video/sis/sis_main.h @@ -67,15 +67,7 @@ static int sisfb_ypan = -1; static int sisfb_max = -1; static int sisfb_userom = 1; static int sisfb_useoem = -1; -#ifdef MODULE -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -static int sisfb_mode_idx = -1; -#else -static int sisfb_mode_idx = MODE_INDEX_NONE; /* Don't use a mode by default if we are a module */ -#endif -#else static int sisfb_mode_idx = -1; /* Use a default mode if we are inside the kernel */ -#endif static int sisfb_parm_rate = -1; static int sisfb_crt1off = 0; static int sisfb_forcecrt1 = -1; @@ -93,10 +85,6 @@ static int sisfb_tvstd = -1; static int sisfb_tvxposoffset = 0; static int sisfb_tvyposoffset = 0; static int sisfb_nocrt2rate = 0; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -static int sisfb_inverse = 0; -static char sisfb_fontname[40]; -#endif #if !defined(__i386__) && !defined(__x86_64__) static int sisfb_resetcard = 0; static int sisfb_videoram = 0; @@ -687,54 +675,8 @@ SISINITSTATIC int sisfb_init(void); static int sisfb_get_fix(struct fb_fix_screeninfo *fix, int con, struct fb_info *info); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -static int sisfb_get_fix(struct fb_fix_screeninfo *fix, - int con, - struct fb_info *info); -static int sisfb_get_var(struct fb_var_screeninfo *var, - int con, - struct fb_info *info); -static int sisfb_set_var(struct fb_var_screeninfo *var, - int con, - struct fb_info *info); -static void sisfb_crtc_to_var(struct sis_video_info *ivideo, - struct fb_var_screeninfo *var); -static int sisfb_get_cmap(struct fb_cmap *cmap, - int kspc, - int con, - struct fb_info *info); -static int sisfb_set_cmap(struct fb_cmap *cmap, - int kspc, - int con, - struct fb_info *info); -static int sisfb_update_var(int con, - struct fb_info *info); -static int sisfb_switch(int con, - struct fb_info *info); -static void sisfb_blank(int blank, - struct fb_info *info); -static void sisfb_set_disp(int con, - struct fb_var_screeninfo *var, - struct fb_info *info); -static int sis_getcolreg(unsigned regno, unsigned *red, unsigned *green, - unsigned *blue, unsigned *transp, - struct fb_info *fb_info); -static void sisfb_do_install_cmap(int con, - struct fb_info *info); -static int sisfb_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg, int con, - struct fb_info *info); -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) static int sisfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg); -#else -static int sisfb_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg, - struct fb_info *info); -#endif static int sisfb_set_par(struct fb_info *info); static int sisfb_blank(int blank, struct fb_info *info); @@ -743,7 +685,6 @@ extern void fbcon_sis_fillrect(struct fb_info *info, extern void fbcon_sis_copyarea(struct fb_info *info, const struct fb_copyarea *area); extern int fbcon_sis_sync(struct fb_info *info); -#endif /* Internal 2D accelerator functions */ extern int sisfb_initaccel(struct sis_video_info *ivideo); @@ -811,16 +752,10 @@ extern BOOLEAN SiSDetermineROMLayout661(struct SiS_Private *SiS_Pr); extern BOOLEAN sisfb_gettotalfrommode(struct SiS_Private *SiS_Pr, unsigned char modeno, int *htotal, int *vtotal, unsigned char rateindex); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) extern int sisfb_mode_rate_to_dclock(struct SiS_Private *SiS_Pr, unsigned char modeno, unsigned char rateindex); extern int sisfb_mode_rate_to_ddata(struct SiS_Private *SiS_Pr, unsigned char modeno, unsigned char rateindex, struct fb_var_screeninfo *var); -#endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -extern void SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres, - int yres, struct fb_var_screeninfo *var, BOOLEAN writeres); -#endif /* Chrontel TV, DDC and DPMS functions */ extern unsigned short SiS_GetCH700x(struct SiS_Private *SiS_Pr, unsigned short reg); diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/sis/vgatypes.h index 831b9f42264..05d08b7889a 100644 --- a/drivers/video/sis/vgatypes.h +++ b/drivers/video/sis/vgatypes.h @@ -73,12 +73,10 @@ typedef unsigned int BOOLEAN; #ifdef SIS_LINUX_KERNEL typedef unsigned long SISIOADDRESS; -#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8) #include <linux/types.h> /* Need __iomem */ #undef SISIOMEMTYPE #define SISIOMEMTYPE __iomem #endif -#endif #ifdef SIS_XORG_XF86 #if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0) diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c index dad54e73147..711cb11d6eb 100644 --- a/drivers/video/sstfb.c +++ b/drivers/video/sstfb.c @@ -17,7 +17,10 @@ * (port driver to new frambuffer infrastructure) * 01/2003 Helge Deller <deller@gmx.de> * (initial work on fb hardware acceleration for voodoo2) - * + * 08/2006 Alan Cox <alan@redhat.com> + * Remove never finished and bogus 24/32bit support + * Clean up macro abuse + * Minor tidying for format. */ /* @@ -40,6 +43,7 @@ through the fifo. warning: issuing a nop command seems to need pci_fifo -FIXME: in case of failure in the init sequence, be sure we return to a safe state. +- FIXME: Use accelerator for 2D scroll -FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20) */ @@ -67,9 +71,6 @@ #undef SST_DEBUG -/* enable 24/32 bpp functions ? (completely untested!) */ -#undef EN_24_32_BPP - /* Default video mode . 0 800x600@60 took from glide @@ -377,7 +378,11 @@ static void sstfb_clear_screen(struct fb_info *info) * sstfb_check_var - Optional function. Validates a var passed in. * @var: frame buffer variable screen structure * @info: frame buffer structure that represents a single frame buffer + * + * Limit to the abilities of a single chip as SLI is not supported + * by this driver. */ + static int sstfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { @@ -390,7 +395,7 @@ static int sstfb_check_var(struct fb_var_screeninfo *var, unsigned int freq; if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) { - eprintk("Pixclock at %ld KHZ out of range\n", + printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n", PICOS2KHZ(var->pixclock)); return -EINVAL; } @@ -409,27 +414,15 @@ static int sstfb_check_var(struct fb_var_screeninfo *var, case 0 ... 16 : var->bits_per_pixel = 16; break; -#ifdef EN_24_32_BPP - case 17 ... 24 : - var->bits_per_pixel = 24; - break; - case 25 ... 32 : - var->bits_per_pixel = 32; - break; -#endif default : - eprintk("Unsupported bpp %d\n", var->bits_per_pixel); + printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel); return -EINVAL; } /* validity tests */ - if ((var->xres <= 1) || (yDim <= 0 ) - || (var->hsync_len <= 1) - || (hSyncOff <= 1) - || (var->left_margin <= 2) - || (vSyncOn <= 0) - || (vSyncOff <= 0) - || (vBackPorch <= 0)) { + if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1 || + hSyncOff <= 1 || var->left_margin <= 2 || vSyncOn <= 0 || + vSyncOff <= 0 || vBackPorch <= 0) { return -EINVAL; } @@ -437,21 +430,17 @@ static int sstfb_check_var(struct fb_var_screeninfo *var, /* Voodoo 2 limits */ tiles_in_X = (var->xres + 63 ) / 64 * 2; - if (((var->xres - 1) >= POW2(11)) || (yDim >= POW2(11))) { - eprintk("Unsupported resolution %dx%d\n", + if (var->xres > POW2(11) || yDim >= POW2(11)) { + printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", var->xres, var->yres); return -EINVAL; } - if (((var->hsync_len-1) >= POW2(9)) - || ((hSyncOff-1) >= POW2(11)) - || ((var->left_margin - 2) >= POW2(9)) - || (vSyncOn >= POW2(13)) - || (vSyncOff >= POW2(13)) - || (vBackPorch >= POW2(9)) - || (tiles_in_X >= POW2(6)) - || (tiles_in_X <= 0)) { - eprintk("Unsupported Timings\n"); + if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) || + var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) || + vSyncOff >= POW2(13) || vBackPorch >= POW2(9) || + tiles_in_X >= POW2(6) || tiles_in_X <= 0) { + printk(KERN_ERR "sstfb: Unsupported timings\n"); return -EINVAL; } } else { @@ -459,24 +448,20 @@ static int sstfb_check_var(struct fb_var_screeninfo *var, tiles_in_X = (var->xres + 63 ) / 64; if (var->vmode) { - eprintk("Interlace/Doublescan not supported %#x\n", + printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n", var->vmode); return -EINVAL; } - if (((var->xres - 1) >= POW2(10)) || (var->yres >= POW2(10))) { - eprintk("Unsupported resolution %dx%d\n", + if (var->xres > POW2(10) || var->yres >= POW2(10)) { + printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", var->xres, var->yres); return -EINVAL; } - if (((var->hsync_len - 1) >= POW2(8)) - || ((hSyncOff-1) >= POW2(10)) - || ((var->left_margin - 2) >= POW2(8)) - || (vSyncOn >= POW2(12)) - || (vSyncOff >= POW2(12)) - || (vBackPorch >= POW2(8)) - || (tiles_in_X >= POW2(4)) - || (tiles_in_X <= 0)) { - eprintk("Unsupported Timings\n"); + if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) || + var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) || + vSyncOff >= POW2(12) || vBackPorch >= POW2(8) || + tiles_in_X >= POW2(4) || tiles_in_X <= 0) { + printk(KERN_ERR "sstfb: Unsupported timings\n"); return -EINVAL; } } @@ -486,8 +471,8 @@ static int sstfb_check_var(struct fb_var_screeninfo *var, real_length = tiles_in_X * (IS_VOODOO2(par) ? 32 : 64 ) * ((var->bits_per_pixel == 16) ? 2 : 4); - if ((real_length * yDim) > info->fix.smem_len) { - eprintk("Not enough video memory\n"); + if (real_length * yDim > info->fix.smem_len) { + printk(KERN_ERR "sstfb: Not enough video memory\n"); return -ENOMEM; } @@ -515,20 +500,6 @@ static int sstfb_check_var(struct fb_var_screeninfo *var, var->blue.offset = 0; var->transp.offset = 0; break; -#ifdef EN_24_32_BPP - case 24: /* RGB 888 LfbMode 4 */ - case 32: /* ARGB 8888 LfbMode 5 */ - var->red.length = 8; - var->green.length = 8; - var->blue.length = 8; - var->transp.length = 0; - - var->red.offset = 16; - var->green.offset = 8; - var->blue.offset = 0; - var->transp.offset = 0; /* in 24bpp we fake a 32 bpp mode */ - break; -#endif default: return -EINVAL; } @@ -653,13 +624,6 @@ static int sstfb_set_par(struct fb_info *info) case 16: fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL; break; -#ifdef EN_24_32_BPP - case 24: - case 32: - /* sst_set_bits(FBIINIT1, SEL_SOURCE_VCLK_2X_DIV2 | EN_24BPP);*/ - fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL | EN_24BPP; - break; -#endif default: return -EINVAL; } @@ -690,14 +654,6 @@ static int sstfb_set_par(struct fb_info *info) case 16: lfbmode = LFB_565; break; -#ifdef EN_24_32_BPP - case 24: - lfbmode = LFB_888; - break; - case 32: - lfbmode = LFB_8888; - break; -#endif default: return -EINVAL; } @@ -789,8 +745,7 @@ static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg) return -EFAULT; if (val > info->fix.smem_len) val = info->fix.smem_len; - printk("filling %#x \n", val); - for (p=0 ; p<val; p+=2) + for (p = 0 ; p < val; p += 2) writew(p >> 6, info->screen_base + p); return 0; @@ -802,13 +757,10 @@ static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg) pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp | PCI_EN_INIT_WR ); fbiinit0 = sst_read (FBIINIT0); - if (val) { + if (val) sst_write(FBIINIT0, fbiinit0 & ~EN_VGA_PASSTHROUGH); - iprintk("Disabling VGA pass-through\n"); - } else { + else sst_write(FBIINIT0, fbiinit0 | EN_VGA_PASSTHROUGH); - iprintk("Enabling VGA pass-through\n"); - } pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp); return 0; @@ -884,9 +836,9 @@ static int __devinit sst_get_memsize(struct fb_info *info, __u32 *memsize) u8 __iomem *fbbase_virt = info->screen_base; /* force memsize */ - if ((mem >= 1 ) && (mem <= 4)) { + if (mem >= 1 && mem <= 4) { *memsize = (mem * 0x100000); - iprintk("supplied memsize: %#x\n", *memsize); + printk(KERN_INFO "supplied memsize: %#x\n", *memsize); return 1; } @@ -927,7 +879,7 @@ static int __devinit sst_detect_att(struct fb_info *info) struct sstfb_par *par = info->par; int i, mir, dir; - for (i=0; i<3; i++) { + for (i = 0; i < 3; i++) { sst_dac_write(DACREG_WMA, 0); /* backdoor */ sst_dac_read(DACREG_RMR); /* read 4 times RMR */ sst_dac_read(DACREG_RMR); @@ -940,7 +892,7 @@ static int __devinit sst_detect_att(struct fb_info *info) /*the 7th, device ID register */ dir = sst_dac_read(DACREG_RMR); f_ddprintk("mir: %#x, dir: %#x\n", mir, dir); - if ((mir == DACREG_MIR_ATT ) && (dir == DACREG_DIR_ATT)) { + if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) { return 1; } } @@ -1134,12 +1086,6 @@ static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp) case 16: sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP); break; -#ifdef EN_24_32_BPP - case 24: - case 32: - sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_24BPP); - break; -#endif default: dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp); break; @@ -1154,12 +1100,6 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp) case 16: sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP); break; -#ifdef EN_24_32_BPP - case 24: - case 32: - sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_24BPP); - break; -#endif default: dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp); break; @@ -1250,7 +1190,7 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par) PCI_EN_INIT_WR | PCI_REMAP_DAC ); /* detect dac type */ if (!sst_detect_dactype(info, par)) { - eprintk("Unknown dac type\n"); + printk(KERN_ERR "sstfb: unknown dac type.\n"); //FIXME watch it: we are not in a safe state, bad bad bad. return 0; } @@ -1258,10 +1198,10 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par) /* set graphic clock */ par->gfx_clock = spec->default_gfx_clock; if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) { - iprintk("Using supplied graphic freq : %dMHz\n", gfxclk); + printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk); par->gfx_clock = gfxclk *1000; } else if (gfxclk) { - wprintk ("%dMhz is way out of spec! Using default\n", gfxclk); + printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk); } sst_calc_pll(par->gfx_clock, &Fout, &gfx_timings); @@ -1396,7 +1336,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev, /* Enable device in PCI config. */ if ((err=pci_enable_device(pdev))) { - eprintk("cannot enable device\n"); + printk(KERN_ERR "cannot enable device\n"); return err; } @@ -1422,39 +1362,39 @@ static int __devinit sstfb_probe(struct pci_dev *pdev, fix->smem_start = fix->mmio_start + 0x400000; if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) { - eprintk("cannot reserve mmio memory\n"); + printk(KERN_ERR "sstfb: cannot reserve mmio memory\n"); goto fail_mmio_mem; } if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) { - eprintk("cannot reserve fb memory\n"); + printk(KERN_ERR "sstfb: cannot reserve fb memory\n"); goto fail_fb_mem; } par->mmio_vbase = ioremap_nocache(fix->mmio_start, fix->mmio_len); if (!par->mmio_vbase) { - eprintk("cannot remap register area %#lx\n", + printk(KERN_ERR "sstfb: cannot remap register area %#lx\n", fix->mmio_start); goto fail_mmio_remap; } info->screen_base = ioremap_nocache(fix->smem_start, 0x400000); if (!info->screen_base) { - eprintk("cannot remap framebuffer %#lx\n", + printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n", fix->smem_start); goto fail_fb_remap; } if (!sst_init(info, par)) { - eprintk("Init failed\n"); + printk(KERN_ERR "sstfb: Init failed\n"); goto fail; } sst_get_memsize(info, &fix->smem_len); strlcpy(fix->id, spec->name, sizeof(fix->id)); - iprintk("%s (revision %d) with %s dac\n", + printk(KERN_INFO "%s (revision %d) with %s dac\n", fix->id, par->revision, par->dac_sw.name); - iprintk("framebuffer at %#lx, mapped to 0x%p, size %dMB\n", + printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n", fix->smem_start, info->screen_base, fix->smem_len >> 20); @@ -1471,24 +1411,25 @@ static int __devinit sstfb_probe(struct pci_dev *pdev, fix->accel = FB_ACCEL_NONE; /* FIXME */ /* * According to the specs, the linelength must be of 1024 *pixels* - * and the 24bpp mode is in fact a 32 bpp mode. + * and the 24bpp mode is in fact a 32 bpp mode (and both are in + * fact dithered to 16bit). */ fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */ if ( mode_option && fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16)) { - eprintk("can't set supplied video mode. Using default\n"); + printk(KERN_ERR "sstfb: can't set supplied video mode. Using default\n"); info->var = sstfb_default; } else info->var = sstfb_default; if (sstfb_check_var(&info->var, info)) { - eprintk("invalid default video mode.\n"); + printk(KERN_ERR "sstfb: invalid default video mode.\n"); goto fail; } if (sstfb_set_par(info)) { - eprintk("can't set default video mode.\n"); + printk(KERN_ERR "sstfb: can't set default video mode.\n"); goto fail; } @@ -1497,7 +1438,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev, /* register fb */ info->device = &pdev->dev; if (register_framebuffer(info) < 0) { - eprintk("can't register framebuffer.\n"); + printk(KERN_ERR "sstfb: can't register framebuffer.\n"); goto fail; } @@ -1711,4 +1652,3 @@ module_param(gfxclk, int, 0); MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)"); module_param(slowpci, bool, 0); MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)"); - diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 2fc99877cb0..cf8a2cb2850 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -30,7 +30,7 @@ static int afs_dir_readdir(struct file *file, void *dirent, filldir_t filldir); static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd); static int afs_d_delete(struct dentry *dentry); static int afs_dir_lookup_filldir(void *_cookie, const char *name, int nlen, - loff_t fpos, ino_t ino, unsigned dtype); + loff_t fpos, u64 ino, unsigned dtype); const struct file_operations afs_dir_file_operations = { .open = afs_dir_open, @@ -409,7 +409,7 @@ static int afs_dir_readdir(struct file *file, void *cookie, filldir_t filldir) * uniquifier through dtype */ static int afs_dir_lookup_filldir(void *_cookie, const char *name, int nlen, - loff_t fpos, ino_t ino, unsigned dtype) + loff_t fpos, u64 ino, unsigned dtype) { struct afs_dir_lookup_cookie *cookie = _cookie; @@ -675,7 +675,7 @@ static ssize_t aio_run_iocb(struct kiocb *iocb) } if (!(iocb->ki_retried & 0xff)) { - pr_debug("%ld retry: %d of %d\n", iocb->ki_retried, + pr_debug("%ld retry: %zd of %zd\n", iocb->ki_retried, iocb->ki_nbytes - iocb->ki_left, iocb->ki_nbytes); } @@ -1008,7 +1008,7 @@ int fastcall aio_complete(struct kiocb *iocb, long res, long res2) pr_debug("added to ring %p at [%lu]\n", iocb, tail); - pr_debug("%ld retries: %d of %d\n", iocb->ki_retried, + pr_debug("%ld retries: %zd of %zd\n", iocb->ki_retried, iocb->ki_nbytes - iocb->ki_left, iocb->ki_nbytes); put_rq: /* everything turned out well, dispose of the aiocb. */ diff --git a/fs/compat.c b/fs/compat.c index d98c96f4a44..4d3fbcb2ddb 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -914,20 +914,24 @@ struct compat_readdir_callback { }; static int compat_fillonedir(void *__buf, const char *name, int namlen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct compat_readdir_callback *buf = __buf; struct compat_old_linux_dirent __user *dirent; + compat_ulong_t d_ino; if (buf->result) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; buf->result++; dirent = buf->dirent; if (!access_ok(VERIFY_WRITE, dirent, (unsigned long)(dirent->d_name + namlen + 1) - (unsigned long)dirent)) goto efault; - if ( __put_user(ino, &dirent->d_ino) || + if ( __put_user(d_ino, &dirent->d_ino) || __put_user(offset, &dirent->d_offset) || __put_user(namlen, &dirent->d_namlen) || __copy_to_user(dirent->d_name, name, namlen) || @@ -978,22 +982,26 @@ struct compat_getdents_callback { }; static int compat_filldir(void *__buf, const char *name, int namlen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct compat_linux_dirent __user * dirent; struct compat_getdents_callback *buf = __buf; + compat_ulong_t d_ino; int reclen = COMPAT_ROUND_UP(NAME_OFFSET(dirent) + namlen + 2); buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; if (dirent) { if (__put_user(offset, &dirent->d_off)) goto efault; } dirent = buf->current_dir; - if (__put_user(ino, &dirent->d_ino)) + if (__put_user(d_ino, &dirent->d_ino)) goto efault; if (__put_user(reclen, &dirent->d_reclen)) goto efault; @@ -1064,7 +1072,7 @@ struct compat_getdents_callback64 { }; static int compat_filldir64(void * __buf, const char * name, int namlen, loff_t offset, - ino_t ino, unsigned int d_type) + u64 ino, unsigned int d_type) { struct linux_dirent64 __user *dirent; struct compat_getdents_callback64 *buf = __buf; diff --git a/fs/configfs/file.c b/fs/configfs/file.c index 85105e50f7d..e6d5754a715 100644 --- a/fs/configfs/file.c +++ b/fs/configfs/file.c @@ -137,8 +137,8 @@ configfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *pp if ((retval = fill_read_buffer(file->f_dentry,buffer))) goto out; } - pr_debug("%s: count = %d, ppos = %lld, buf = %s\n", - __FUNCTION__,count,*ppos,buffer->page); + pr_debug("%s: count = %zd, ppos = %lld, buf = %s\n", + __FUNCTION__, count, *ppos, buffer->page); retval = flush_read_buffer(buffer,buf,count,ppos); out: up(&buffer->sem); diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 8d544334bcd..557d5b614fa 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -720,9 +720,10 @@ static int ep_getfd(int *efd, struct inode **einode, struct file **efile, /* Allocates an inode from the eventpoll file system */ inode = ep_eventpoll_inode(); - error = PTR_ERR(inode); - if (IS_ERR(inode)) + if (IS_ERR(inode)) { + error = PTR_ERR(inode); goto eexit_2; + } /* Allocates a free descriptor to plug the file onto */ error = get_unused_fd(); diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c index 4c39009350f..93e77c3d249 100644 --- a/fs/exportfs/expfs.c +++ b/fs/exportfs/expfs.c @@ -315,7 +315,7 @@ struct getdents_callback { * the name matching the specified inode number. */ static int filldir_one(void * __buf, const char * name, int len, - loff_t pos, ino_t ino, unsigned int d_type) + loff_t pos, u64 ino, unsigned int d_type) { struct getdents_callback *buf = __buf; int result = 0; diff --git a/fs/fat/dir.c b/fs/fat/dir.c index 3e50a416628..69c439f4438 100644 --- a/fs/fat/dir.c +++ b/fs/fat/dir.c @@ -648,7 +648,7 @@ static int fat_readdir(struct file *filp, void *dirent, filldir_t filldir) } static int fat_ioctl_filldir(void *__buf, const char *name, int name_len, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct fat_ioctl_filldir_callback *buf = __buf; struct dirent __user *d1 = buf->dirent; diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c index e35d7e52fde..1cbd2e4ee12 100644 --- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -184,7 +184,7 @@ struct dentry_list_arg { static int nfsd4_build_dentrylist(void *arg, const char *name, int namlen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct dentry_list_arg *dla = arg; struct list_head *dentries = &dla->dentries; diff --git a/fs/readdir.c b/fs/readdir.c index b6109329b60..bff3ee58e2f 100644 --- a/fs/readdir.c +++ b/fs/readdir.c @@ -69,20 +69,24 @@ struct readdir_callback { }; static int fillonedir(void * __buf, const char * name, int namlen, loff_t offset, - ino_t ino, unsigned int d_type) + u64 ino, unsigned int d_type) { struct readdir_callback * buf = (struct readdir_callback *) __buf; struct old_linux_dirent __user * dirent; + unsigned long d_ino; if (buf->result) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; buf->result++; dirent = buf->dirent; if (!access_ok(VERIFY_WRITE, dirent, (unsigned long)(dirent->d_name + namlen + 1) - (unsigned long)dirent)) goto efault; - if ( __put_user(ino, &dirent->d_ino) || + if ( __put_user(d_ino, &dirent->d_ino) || __put_user(offset, &dirent->d_offset) || __put_user(namlen, &dirent->d_namlen) || __copy_to_user(dirent->d_name, name, namlen) || @@ -138,22 +142,26 @@ struct getdents_callback { }; static int filldir(void * __buf, const char * name, int namlen, loff_t offset, - ino_t ino, unsigned int d_type) + u64 ino, unsigned int d_type) { struct linux_dirent __user * dirent; struct getdents_callback * buf = (struct getdents_callback *) __buf; + unsigned long d_ino; int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 2); buf->error = -EINVAL; /* only used if we fail.. */ if (reclen > buf->count) return -EINVAL; + d_ino = ino; + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + return -EOVERFLOW; dirent = buf->previous; if (dirent) { if (__put_user(offset, &dirent->d_off)) goto efault; } dirent = buf->current_dir; - if (__put_user(ino, &dirent->d_ino)) + if (__put_user(d_ino, &dirent->d_ino)) goto efault; if (__put_user(reclen, &dirent->d_reclen)) goto efault; @@ -222,7 +230,7 @@ struct getdents_callback64 { }; static int filldir64(void * __buf, const char * name, int namlen, loff_t offset, - ino_t ino, unsigned int d_type) + u64 ino, unsigned int d_type) { struct linux_dirent64 __user *dirent; struct getdents_callback64 * buf = (struct getdents_callback64 *) __buf; diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index d935fb9394e..7bdb0ed443e 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -773,7 +773,7 @@ int reiserfs_xattr_del(struct inode *inode, const char *name) static int reiserfs_delete_xattrs_filler(void *buf, const char *name, int namelen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct dentry *xadir = (struct dentry *)buf; @@ -851,7 +851,7 @@ struct reiserfs_chown_buf { /* XXX: If there is a better way to do this, I'd love to hear about it */ static int reiserfs_chown_xattrs_filler(void *buf, const char *name, int namelen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct reiserfs_chown_buf *chown_buf = (struct reiserfs_chown_buf *)buf; struct dentry *xafile, *xadir = chown_buf->xadir; @@ -1036,7 +1036,7 @@ struct reiserfs_listxattr_buf { static int reiserfs_listxattr_filler(void *buf, const char *name, int namelen, - loff_t offset, ino_t ino, unsigned int d_type) + loff_t offset, u64 ino, unsigned int d_type) { struct reiserfs_listxattr_buf *b = (struct reiserfs_listxattr_buf *)buf; int len = 0; diff --git a/fs/stat.c b/fs/stat.c index 60a31d5e596..bca07eb2003 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -140,6 +140,8 @@ static int cp_old_stat(struct kstat *stat, struct __old_kernel_stat __user * sta memset(&tmp, 0, sizeof(struct __old_kernel_stat)); tmp.st_dev = old_encode_dev(stat->dev); tmp.st_ino = stat->ino; + if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino) + return -EOVERFLOW; tmp.st_mode = stat->mode; tmp.st_nlink = stat->nlink; if (tmp.st_nlink != stat->nlink) @@ -210,6 +212,8 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf) tmp.st_dev = new_encode_dev(stat->dev); #endif tmp.st_ino = stat->ino; + if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino) + return -EOVERFLOW; tmp.st_mode = stat->mode; tmp.st_nlink = stat->nlink; if (tmp.st_nlink != stat->nlink) @@ -347,6 +351,8 @@ static long cp_new_stat64(struct kstat *stat, struct stat64 __user *statbuf) tmp.st_rdev = huge_encode_dev(stat->rdev); #endif tmp.st_ino = stat->ino; + if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino) + return -EOVERFLOW; #ifdef STAT64_HAS_BROKEN_ST_INO tmp.__st_ino = stat->ino; #endif diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index cf3786625bf..146f1dedec8 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -157,8 +157,8 @@ sysfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *ppos) if ((retval = fill_read_buffer(file->f_dentry,buffer))) goto out; } - pr_debug("%s: count = %d, ppos = %lld, buf = %s\n", - __FUNCTION__,count,*ppos,buffer->page); + pr_debug("%s: count = %zd, ppos = %lld, buf = %s\n", + __FUNCTION__, count, *ppos, buffer->page); retval = flush_read_buffer(buffer,buf,count,ppos); out: up(&buffer->sem); diff --git a/include/asm-i386/mca_dma.h b/include/asm-i386/mca_dma.h index 4b3b526c5a3..fbb1f3b7127 100644 --- a/include/asm-i386/mca_dma.h +++ b/include/asm-i386/mca_dma.h @@ -181,7 +181,7 @@ static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr) * @mode: mode to set * * The DMA controller supports several modes. The mode values you can - * set are : + * set are- * * %MCA_DMA_MODE_READ when reading from the DMA device. * @@ -190,7 +190,6 @@ static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr) * %MCA_DMA_MODE_IO to do DMA to or from an I/O port. * * %MCA_DMA_MODE_16 to do 16bit transfers. - * */ static __inline__ void mca_set_dma_mode(unsigned int dmanr, unsigned int mode) diff --git a/include/asm-i386/topology.h b/include/asm-i386/topology.h index 6adbd9b1ae8..978d0959613 100644 --- a/include/asm-i386/topology.h +++ b/include/asm-i386/topology.h @@ -74,6 +74,7 @@ static inline int node_to_first_cpu(int node) #define SD_NODE_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 8, \ .max_interval = 32, \ diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h index 937c2125752..a6e38565ab4 100644 --- a/include/asm-ia64/topology.h +++ b/include/asm-ia64/topology.h @@ -59,6 +59,7 @@ void build_cpu_to_node_map(void); #define SD_CPU_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 1, \ .max_interval = 4, \ @@ -84,6 +85,7 @@ void build_cpu_to_node_map(void); #define SD_NODE_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 8, \ .max_interval = 8*(min(num_online_cpus(), 32)), \ diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h index 59d26b52ba3..a13b715fd9c 100644 --- a/include/asm-mips/mach-ip27/topology.h +++ b/include/asm-mips/mach-ip27/topology.h @@ -22,6 +22,7 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; #define SD_NODE_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 8, \ .max_interval = 32, \ diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h new file mode 100644 index 00000000000..3d0e819d37f --- /dev/null +++ b/include/asm-powerpc/fs_pd.h @@ -0,0 +1,45 @@ +/* + * Platform information definitions. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_PD_H +#define FS_PD_H +#include <asm/cpm2.h> +#include <sysdev/fsl_soc.h> +#include <asm/time.h> + +static inline int uart_baudrate(void) +{ + return get_baudrate(); +} + +static inline int uart_clock(void) +{ + return ppc_proc_freq; +} + +#define cpm2_map(member) \ +({ \ + u32 offset = offsetof(cpm2_map_t, member); \ + void *addr = ioremap (CPM_MAP_ADDR + offset, \ + sizeof( ((cpm2_map_t*)0)->member)); \ + addr; \ +}) + +#define cpm2_map_size(member, size) \ +({ \ + u32 offset = offsetof(cpm2_map_t, member); \ + void *addr = ioremap (CPM_MAP_ADDR + offset, size); \ + addr; \ +}) + +#define cpm2_unmap(addr) iounmap(addr) + +#endif diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 19b2ec1ec66..cbbd8c648df 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -11,7 +11,6 @@ /* Check of existence of legacy devices */ extern int check_legacy_ioport(unsigned long base_port); -#define PARALLEL_BASE 0x378 #define PNPBIOS_BASE 0xf000 /* only relevant for PReP */ #ifndef CONFIG_PPC64 diff --git a/include/asm-powerpc/mpc85xx.h b/include/asm-powerpc/mpc85xx.h new file mode 100644 index 00000000000..ccdb8a21138 --- /dev/null +++ b/include/asm-powerpc/mpc85xx.h @@ -0,0 +1,53 @@ +/* + * include/asm-powerpc/mpc85xx.h + * + * MPC85xx definitions + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC85xx_H__ +#define __ASM_MPC85xx_H__ + +#include <asm/mmu.h> + +#ifdef CONFIG_85xx + +#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS) +#include <platforms/85xx/mpc85xx_ads.h> +#endif +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) +#include <platforms/85xx/mpc8555_cds.h> +#endif +#ifdef CONFIG_MPC85xx_CDS +#include <platforms/85xx/mpc85xx_cds.h> +#endif + +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#ifdef CONFIG_PCI +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define PCI_DRAM_OFFSET 0 +#endif + +/* Let modules/drivers get at CCSRBAR */ +extern phys_addr_t get_ccsrbar(void); + +#ifdef MODULE +#define CCSRBAR get_ccsrbar() +#else +#define CCSRBAR BOARD_CCSRBAR +#endif + +#endif /* CONFIG_85xx */ +#endif /* __ASM_MPC85xx_H__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index 5785ac4737b..b051d4c88c3 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -39,6 +39,10 @@ extern void generic_calibrate_decr(void); extern void wakeup_decrementer(void); extern void snapshot_timebase(void); +#ifdef CONFIG_RTC_CLASS +extern int __init rtc_class_hookup(void); +#endif + /* Some sane defaults: 125 MHz timebase, 1GHz processor */ extern unsigned long ppc_proc_freq; #define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) @@ -234,4 +238,4 @@ extern void snapshot_timebases(void); #endif #endif /* __KERNEL__ */ -#endif /* __PPC64_TIME_H */ +#endif /* __POWERPC_TIME_H */ diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index bbc3844b086..8f7ee16781a 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -43,6 +43,7 @@ extern int pcibus_to_node(struct pci_bus *bus); #define SD_NODE_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 8, \ .max_interval = 32, \ diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index f6a7ff04ffe..220cc2debe0 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -42,6 +42,8 @@ #define CPM_CR_IDMA4_SBLOCK (0x17) #define CPM_CR_MCC1_SBLOCK (0x1c) +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + #define CPM_CR_SCC1_PAGE (0x00) #define CPM_CR_SCC2_PAGE (0x01) #define CPM_CR_SCC3_PAGE (0x02) @@ -62,6 +64,8 @@ #define CPM_CR_MCC1_PAGE (0x07) #define CPM_CR_MCC2_PAGE (0x08) +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + /* Some opcodes (there are more...later) */ #define CPM_CR_INIT_TRX ((ushort)0x0000) @@ -173,6 +177,10 @@ typedef struct cpm_buf_desc { #define PROFF_I2C_BASE ((uint)0x8afc) #define PROFF_IDMA4_BASE ((uint)0x8afe) +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + /* The SMCs are relocated to any of the first eight DPRAM pages. * We will fix these at the first locations of DPRAM, until we * get some microcode patches :-). @@ -1186,7 +1194,60 @@ typedef struct im_idma { #define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) #define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) #define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) + +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3 +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/fs_pd.h b/include/asm-ppc/fs_pd.h new file mode 100644 index 00000000000..8691327653a --- /dev/null +++ b/include/asm-ppc/fs_pd.h @@ -0,0 +1,36 @@ +/* + * Platform information definitions. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_PD_H +#define FS_PD_H + +static inline int uart_baudrate(void) +{ + int baud; + bd_t *bd = (bd_t *) __res; + + if (bd->bi_baudrate) + baud = bd->bi_baudrate; + else + baud = -1; + return baud; +} + +static inline int uart_clock(void) +{ + return (((bd_t *) __res)->bi_intfreq); +} + +#define cpm2_map(member) (&cpm2_immr->member) +#define cpm2_map_size(member, size) (&cpm2_immr->member) +#define cpm2_unmap(addr) do {} while(0) + +#endif diff --git a/include/asm-ppc/rheap.h b/include/asm-ppc/rheap.h index e6ca1f67ced..65b93225a77 100644 --- a/include/asm-ppc/rheap.h +++ b/include/asm-ppc/rheap.h @@ -62,6 +62,10 @@ extern int rh_attach_region(rh_info_t * info, void *start, int size); /* Detach a free region */ extern void *rh_detach_region(rh_info_t * info, void *start, int size); +/* Allocate the given size from the remote heap (with alignment) */ +extern void *rh_alloc_align(rh_info_t * info, int size, int alignment, + const char *owner); + /* Allocate the given size from the remote heap */ extern void *rh_alloc(rh_info_t * info, int size, const char *owner); diff --git a/include/asm-sparc64/compat_signal.h b/include/asm-sparc64/compat_signal.h new file mode 100644 index 00000000000..7aefa301321 --- /dev/null +++ b/include/asm-sparc64/compat_signal.h @@ -0,0 +1,30 @@ +#ifndef _COMPAT_SIGNAL_H +#define _COMPAT_SIGNAL_H + +#include <linux/config.h> +#include <linux/compat.h> +#include <asm/signal.h> + +#ifdef CONFIG_COMPAT +struct __new_sigaction32 { + unsigned sa_handler; + unsigned int sa_flags; + unsigned sa_restorer; /* not used by Linux/SPARC yet */ + compat_sigset_t sa_mask; +}; + +struct __old_sigaction32 { + unsigned sa_handler; + compat_old_sigset_t sa_mask; + unsigned int sa_flags; + unsigned sa_restorer; /* not used by Linux/SPARC yet */ +}; + +typedef struct sigaltstack32 { + u32 ss_sp; + int ss_flags; + compat_size_t ss_size; +} stack_t32; +#endif + +#endif /* !(_COMPAT_SIGNAL_H) */ diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h index 9968871103b..fa6f467389d 100644 --- a/include/asm-sparc64/signal.h +++ b/include/asm-sparc64/signal.h @@ -8,7 +8,6 @@ #ifndef __ASSEMBLY__ #include <linux/personality.h> #include <linux/types.h> -#include <linux/compat.h> #endif #endif @@ -167,23 +166,6 @@ struct __new_sigaction { __new_sigset_t sa_mask; }; -#ifdef __KERNEL__ - -#ifdef CONFIG_COMPAT -struct __new_sigaction32 { - unsigned sa_handler; - unsigned int sa_flags; - unsigned sa_restorer; /* not used by Linux/SPARC yet */ - compat_sigset_t sa_mask; -}; -#endif - -struct k_sigaction { - struct __new_sigaction sa; - void __user *ka_restorer; -}; -#endif - struct __old_sigaction { __sighandler_t sa_handler; __old_sigset_t sa_mask; @@ -191,19 +173,6 @@ struct __old_sigaction { void (*sa_restorer)(void); /* not used by Linux/SPARC yet */ }; -#ifdef __KERNEL__ - -#ifdef CONFIG_COMPAT -struct __old_sigaction32 { - unsigned sa_handler; - compat_old_sigset_t sa_mask; - unsigned int sa_flags; - unsigned sa_restorer; /* not used by Linux/SPARC yet */ -}; -#endif - -#endif - typedef struct sigaltstack { void __user *ss_sp; int ss_flags; @@ -212,13 +181,10 @@ typedef struct sigaltstack { #ifdef __KERNEL__ -#ifdef CONFIG_COMPAT -typedef struct sigaltstack32 { - u32 ss_sp; - int ss_flags; - compat_size_t ss_size; -} stack_t32; -#endif +struct k_sigaction { + struct __new_sigaction sa; + void __user *ka_restorer; +}; struct signal_deliver_cookie { int restart_syscall; diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h index 6e7a2e976b0..5c8f49280db 100644 --- a/include/asm-x86_64/topology.h +++ b/include/asm-x86_64/topology.h @@ -31,6 +31,7 @@ extern int __node_distance(int, int); #define SD_NODE_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 8, \ .max_interval = 32, \ diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h index d5b7abc4f40..4e1663d7691 100644 --- a/include/linux/compat_ioctl.h +++ b/include/linux/compat_ioctl.h @@ -122,10 +122,10 @@ COMPATIBLE_IOCTL(PROTECT_ARRAY) ULONG_IOCTL(HOT_ADD_DISK) ULONG_IOCTL(SET_DISK_FAULTY) COMPATIBLE_IOCTL(RUN_ARRAY) -ULONG_IOCTL(START_ARRAY) COMPATIBLE_IOCTL(STOP_ARRAY) COMPATIBLE_IOCTL(STOP_ARRAY_RO) COMPATIBLE_IOCTL(RESTART_ARRAY_RW) +ULONG_IOCTL(SET_BITMAP_FILE) /* DM */ COMPATIBLE_IOCTL(DM_VERSION_32) COMPATIBLE_IOCTL(DM_REMOVE_ALL_32) diff --git a/include/linux/console.h b/include/linux/console.h index 76a1807726e..7d0420274de 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -129,6 +129,9 @@ static inline void suspend_console(void) {} static inline void resume_console(void) {} #endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */ +int mda_console_init(void); +void prom_con_init(void); + /* Some debug stub to catch some of the obvious races in the VT code */ #if 1 #define WARN_CONSOLE_UNLOCKED() WARN_ON(!is_console_locked() && !oops_in_progress) diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h index 65842efc1b7..82c9a1f1102 100644 --- a/include/linux/consolemap.h +++ b/include/linux/consolemap.h @@ -13,3 +13,4 @@ struct vc_data; extern unsigned char inverse_translate(struct vc_data *conp, int glyph); extern unsigned short *set_translate(int m, struct vc_data *vc); extern int conv_uni_to_pc(struct vc_data *conp, long ucs); +void console_map_init(void); diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index e3d1c33d155..03ef41c1eaa 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -55,8 +55,10 @@ typedef int (*dm_endio_fn) (struct dm_target *ti, struct bio *bio, int error, union map_info *map_context); +typedef void (*dm_flush_fn) (struct dm_target *ti); typedef void (*dm_presuspend_fn) (struct dm_target *ti); typedef void (*dm_postsuspend_fn) (struct dm_target *ti); +typedef int (*dm_preresume_fn) (struct dm_target *ti); typedef void (*dm_resume_fn) (struct dm_target *ti); typedef int (*dm_status_fn) (struct dm_target *ti, status_type_t status_type, @@ -64,9 +66,18 @@ typedef int (*dm_status_fn) (struct dm_target *ti, status_type_t status_type, typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv); +typedef int (*dm_ioctl_fn) (struct dm_target *ti, struct inode *inode, + struct file *filp, unsigned int cmd, + unsigned long arg); + void dm_error(const char *message); /* + * Combine device limits. + */ +void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev); + +/* * Constructors should call these functions to ensure destination devices * are opened/closed correctly. * FIXME: too many arguments. @@ -86,11 +97,14 @@ struct target_type { dm_dtr_fn dtr; dm_map_fn map; dm_endio_fn end_io; + dm_flush_fn flush; dm_presuspend_fn presuspend; dm_postsuspend_fn postsuspend; + dm_preresume_fn preresume; dm_resume_fn resume; dm_status_fn status; dm_message_fn message; + dm_ioctl_fn ioctl; }; struct io_restrictions { diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h index 9623bb62509..8853fc4d1c5 100644 --- a/include/linux/dm-ioctl.h +++ b/include/linux/dm-ioctl.h @@ -285,9 +285,9 @@ typedef char ioctl_struct[308]; #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 7 +#define DM_VERSION_MINOR 10 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2006-06-24)" +#define DM_VERSION_EXTRA "-ioctl (2006-09-14)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/linux/fb.h b/include/linux/fb.h index 2f335e96601..3e69241e6a8 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -2,6 +2,7 @@ #define _LINUX_FB_H #include <asm/types.h> +#include <linux/i2c.h> /* Definitions of frame buffers */ @@ -775,6 +776,7 @@ struct fb_info { struct fb_ops *fbops; struct device *device; struct class_device *class_device; /* sysfs per device attrs */ + int class_flag; /* private sysfs flags */ #ifdef CONFIG_FB_TILEBLITTING struct fb_tile_ops *tileops; /* Tile Blitting */ #endif @@ -940,6 +942,7 @@ extern void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs); extern void fb_destroy_modedb(struct fb_videomode *modedb); extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb); +extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter); /* drivers/video/modedb.c */ #define VESA_MODEDB_SIZE 34 diff --git a/include/linux/fs.h b/include/linux/fs.h index 91c0b2a32a9..f53bf4ff195 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1049,7 +1049,7 @@ int generic_osync_inode(struct inode *, struct address_space *, int); * This allows the kernel to read directories into kernel space or * to have different dirent layouts depending on the binary type. */ -typedef int (*filldir_t)(void *, const char *, int, loff_t, ino_t, unsigned); +typedef int (*filldir_t)(void *, const char *, int, loff_t, u64, unsigned); struct block_device_operations { int (*open) (struct inode *, struct file *); @@ -1523,6 +1523,9 @@ extern const struct file_operations def_fifo_fops; #ifdef CONFIG_BLOCK extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long); extern int blkdev_ioctl(struct inode *, struct file *, unsigned, unsigned long); +extern int blkdev_driver_ioctl(struct inode *inode, struct file *file, + struct gendisk *disk, unsigned cmd, + unsigned long arg); extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long); extern int blkdev_get(struct block_device *, mode_t, unsigned); extern int blkdev_put(struct block_device *); diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index 74ed35a00a9..543cd3cd9e7 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -55,6 +55,30 @@ static inline int fs_get_scc_index(enum fs_id id) return -1; } +static inline int fs_fec_index2id(int index) +{ + int id = fsid_fec1 + index - 1; + if (id >= fsid_fec1 && id <= fsid_fec2) + return id; + return FS_MAX_INDEX; + } + +static inline int fs_fcc_index2id(int index) +{ + int id = fsid_fcc1 + index - 1; + if (id >= fsid_fcc1 && id <= fsid_fcc3) + return id; + return FS_MAX_INDEX; +} + +static inline int fs_scc_index2id(int index) +{ + int id = fsid_scc1 + index - 1; + if (id >= fsid_scc1 && id <= fsid_scc4) + return id; + return FS_MAX_INDEX; +} + enum fs_mii_method { fsmii_fixed, fsmii_fec, @@ -87,18 +111,21 @@ struct fs_mii_bb_platform_info { }; struct fs_platform_info { - - void(*init_ioports)(void); + + void(*init_ioports)(struct fs_platform_info *); /* device specific information */ int fs_no; /* controller index */ + char fs_type[4]; /* controller type */ u32 cp_page; /* CPM page */ u32 cp_block; /* CPM sblock */ - + u32 clk_trx; /* some stuff for pins & mux configuration*/ + u32 clk_rx; + u32 clk_tx; u32 clk_route; u32 clk_mask; - + u32 mem_offset; u32 dpram_offset; u32 fcc_regs_c; @@ -124,4 +151,16 @@ struct fs_mii_fec_platform_info { u32 irq[32]; u32 mii_speed; }; + +static inline int fs_get_id(struct fs_platform_info *fpi) +{ + if(strstr(fpi->fs_type, "SCC")) + return fs_scc_index2id(fpi->fs_no); + if(strstr(fpi->fs_type, "FCC")) + return fs_fcc_index2id(fpi->fs_no); + if(strstr(fpi->fs_type, "FEC")) + return fs_fec_index2id(fpi->fs_no); + return fpi->fs_no; +} + #endif diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h index f5975126b71..809bb9ffc78 100644 --- a/include/linux/fs_uart_pd.h +++ b/include/linux/fs_uart_pd.h @@ -46,15 +46,27 @@ static inline int fs_uart_id_fsid2smc(int id) } struct fs_uart_platform_info { - void(*init_ioports)(void); + void(*init_ioports)(struct fs_uart_platform_info *); /* device specific information */ int fs_no; /* controller index */ + char fs_type[4]; /* controller type */ u32 uart_clk; u8 tx_num_fifo; u8 tx_buf_size; u8 rx_num_fifo; u8 rx_buf_size; u8 brg; + u8 clk_rx; + u8 clk_tx; }; +static inline int fs_uart_get_id(struct fs_uart_platform_info *fpi) +{ + if(strstr(fpi->fs_type, "SMC")) + return fs_uart_id_smc2fsid(fpi->fs_no); + if(strstr(fpi->fs_type, "SCC")) + return fs_uart_id_scc2fsid(fpi->fs_no); + return fpi->fs_no; +} + #endif diff --git a/include/linux/ide.h b/include/linux/ide.h index 99620451d95..07d8d725541 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -251,7 +251,8 @@ static inline void ide_std_init_ports(hw_regs_t *hw, #include <asm/ide.h> -#ifndef MAX_HWIFS +#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED) +#undef MAX_HWIFS #define MAX_HWIFS CONFIG_IDE_MAX_HWIFS #endif @@ -773,12 +774,13 @@ typedef struct hwif_s { unsigned long dma_status; /* dma status register */ unsigned long dma_vendor3; /* dma vendor 3 register */ unsigned long dma_prdtable; /* actual prd table address */ - unsigned long dma_base2; /* extended base addr for dma ports */ - unsigned dma_extra; /* extra addr for dma ports */ unsigned long config_data; /* for use by chipset-specific code */ unsigned long select_data; /* for use by chipset-specific code */ + unsigned long extra_base; /* extra addr for dma ports */ + unsigned extra_ports; /* number of extra dma ports */ + unsigned noprobe : 1; /* don't probe for this interface */ unsigned present : 1; /* this interface exists */ unsigned hold : 1; /* this interface is always present */ @@ -823,6 +825,9 @@ typedef struct hwgroup_s { unsigned int sleeping : 1; /* BOOL: polling active & poll_timeout field valid */ unsigned int polling : 1; + /* BOOL: in a polling reset situation. Must not trigger another reset yet */ + unsigned int resetting : 1; + /* current drive */ ide_drive_t *drive; /* ptr to current hwif in linked-list */ @@ -1190,7 +1195,6 @@ extern int ideprobe_init(void); extern void ide_scan_pcibus(int scan_direction) __init; extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner); #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE) -extern void ide_pci_unregister_driver(struct pci_driver *driver); void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *); extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d); diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h index 849043ce4ed..1cebcbc28b4 100644 --- a/include/linux/kallsyms.h +++ b/include/linux/kallsyms.h @@ -12,6 +12,10 @@ /* Lookup the address for a symbol. Returns 0 if not found. */ unsigned long kallsyms_lookup_name(const char *name); +extern int kallsyms_lookup_size_offset(unsigned long addr, + unsigned long *symbolsize, + unsigned long *offset); + /* Lookup an address. modname is set to NULL if it's in the kernel. */ const char *kallsyms_lookup(unsigned long addr, unsigned long *symbolsize, @@ -28,6 +32,13 @@ static inline unsigned long kallsyms_lookup_name(const char *name) return 0; } +static inline int kallsyms_lookup_size_offset(unsigned long addr, + unsigned long *symbolsize, + unsigned long *offset) +{ + return 0; +} + static inline const char *kallsyms_lookup(unsigned long addr, unsigned long *symbolsize, unsigned long *offset, diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 4d00988dad0..80f39cab470 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -216,8 +216,10 @@ extern void dump_stack(void); #define pr_debug(fmt,arg...) \ printk(KERN_DEBUG fmt,##arg) #else -#define pr_debug(fmt,arg...) \ - do { } while (0) +static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...) +{ + return 0; +} #endif #define pr_info(fmt,arg...) \ diff --git a/include/linux/pid.h b/include/linux/pid.h index 17b9e04d358..2c0007d1721 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -105,28 +105,28 @@ static inline pid_t pid_nr(struct pid *pid) } -#define do_each_task_pid(who, type, task) \ - do { \ - struct hlist_node *pos___; \ - struct pid *pid___ = find_pid(who); \ - if (pid___ != NULL) \ - hlist_for_each_entry_rcu((task), pos___, \ +#define do_each_task_pid(who, type, task) \ + do { \ + struct hlist_node *pos___; \ + struct pid *pid___ = find_pid(who); \ + if (pid___ != NULL) \ + hlist_for_each_entry_rcu((task), pos___, \ &pid___->tasks[type], pids[type].node) { -#define while_each_task_pid(who, type, task) \ - } \ +#define while_each_task_pid(who, type, task) \ + } \ } while (0) -#define do_each_pid_task(pid, type, task) \ - do { \ - struct hlist_node *pos___; \ - if (pid != NULL) \ - hlist_for_each_entry_rcu((task), pos___, \ +#define do_each_pid_task(pid, type, task) \ + do { \ + struct hlist_node *pos___; \ + if (pid != NULL) \ + hlist_for_each_entry_rcu((task), pos___, \ &pid->tasks[type], pids[type].node) { -#define while_each_pid_task(pid, type, task) \ - } \ +#define while_each_pid_task(pid, type, task) \ + } \ } while (0) #endif /* _LINUX_PID_H */ diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h index 63df898fe2e..84d88775185 100644 --- a/include/linux/raid/bitmap.h +++ b/include/linux/raid/bitmap.h @@ -265,6 +265,8 @@ int bitmap_update_sb(struct bitmap *bitmap); int bitmap_setallbits(struct bitmap *bitmap); void bitmap_write_all(struct bitmap *bitmap); +void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e); + /* these are exported */ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors, int behind); diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h index c588709acbb..866a1e2b0ce 100644 --- a/include/linux/raid/md.h +++ b/include/linux/raid/md.h @@ -95,7 +95,6 @@ extern int sync_page_io(struct block_device *bdev, sector_t sector, int size, extern void md_do_sync(mddev_t *mddev); extern void md_new_event(mddev_t *mddev); -extern void md_update_sb(mddev_t * mddev); #endif /* CONFIG_MD */ #endif diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index 920b94fe31f..8245c282168 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -31,18 +31,15 @@ #define LEVEL_NONE (-1000000) #define MaxSector (~(sector_t)0) -#define MD_THREAD_NAME_MAX 14 typedef struct mddev_s mddev_t; typedef struct mdk_rdev_s mdk_rdev_t; -#define MAX_MD_DEVS 256 /* Max number of md dev */ - /* * options passed in raidrun: */ -/* Currently this must fix in an 'int' */ +/* Currently this must fit in an 'int' */ #define MAX_CHUNK_SIZE (1<<30) /* @@ -116,7 +113,11 @@ struct mddev_s dev_t unit; int md_minor; struct list_head disks; - int sb_dirty; + unsigned long flags; +#define MD_CHANGE_DEVS 0 /* Some device status has changed */ +#define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */ +#define MD_CHANGE_PENDING 2 /* superblock update in progress */ + int ro; struct gendisk *gendisk; diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h index 81da20ccec4..7192035fc4b 100644 --- a/include/linux/raid/md_u.h +++ b/include/linux/raid/md_u.h @@ -41,7 +41,7 @@ /* usage */ #define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) -#define START_ARRAY _IO (MD_MAJOR, 0x31) +/* 0x31 was START_ARRAY */ #define STOP_ARRAY _IO (MD_MAJOR, 0x32) #define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) #define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) diff --git a/include/linux/raid/raid1.h b/include/linux/raid/raid1.h index 3009c813d83..0a9ba7c3302 100644 --- a/include/linux/raid/raid1.h +++ b/include/linux/raid/raid1.h @@ -30,7 +30,6 @@ struct r1_private_data_s { mddev_t *mddev; mirror_info_t *mirrors; int raid_disks; - int working_disks; int last_used; sector_t next_seq_sect; spinlock_t device_lock; diff --git a/include/linux/raid/raid10.h b/include/linux/raid/raid10.h index c41e56a7c09..e9091cfeb28 100644 --- a/include/linux/raid/raid10.h +++ b/include/linux/raid/raid10.h @@ -16,7 +16,6 @@ struct r10_private_data_s { mddev_t *mddev; mirror_info_t *mirrors; int raid_disks; - int working_disks; spinlock_t device_lock; /* geometry */ diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h index 20ed4c99763..f13299a1559 100644 --- a/include/linux/raid/raid5.h +++ b/include/linux/raid/raid5.h @@ -195,8 +195,9 @@ struct stripe_head { * it to the count of prereading stripes. * When write is initiated, or the stripe refcnt == 0 (just in case) we * clear the PREREAD_ACTIVE flag and decrement the count - * Whenever the delayed queue is empty and the device is not plugged, we - * move any strips from delayed to handle and clear the DELAYED flag and set PREREAD_ACTIVE. + * Whenever the 'handle' queue is empty and the device is not plugged, we + * move any strips from delayed to handle and clear the DELAYED flag and set + * PREREAD_ACTIVE. * In stripe_handle, if we find pre-reading is necessary, we do it if * PREREAD_ACTIVE is set, else we set DELAYED which will send it to the delayed queue. * HANDLE gets cleared if stripe_handle leave nothing locked. @@ -213,7 +214,7 @@ struct raid5_private_data { struct disk_info *spare; int chunk_size, level, algorithm; int max_degraded; - int raid_disks, working_disks, failed_disks; + int raid_disks; int max_nr_stripes; /* used during an expand */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 38530232d92..331f4502e92 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -625,9 +625,17 @@ enum idle_type #define SD_WAKE_BALANCE 64 /* Perform balancing at task wakeup */ #define SD_SHARE_CPUPOWER 128 /* Domain members share cpu power */ #define SD_POWERSAVINGS_BALANCE 256 /* Balance for power savings */ +#define SD_SHARE_PKG_RESOURCES 512 /* Domain members share cpu pkg resources */ -#define BALANCE_FOR_POWER ((sched_mc_power_savings || sched_smt_power_savings) \ - ? SD_POWERSAVINGS_BALANCE : 0) +#define BALANCE_FOR_MC_POWER \ + (sched_smt_power_savings ? SD_POWERSAVINGS_BALANCE : 0) + +#define BALANCE_FOR_PKG_POWER \ + ((sched_mc_power_savings || sched_smt_power_savings) ? \ + SD_POWERSAVINGS_BALANCE : 0) + +#define test_sd_parent(sd, flag) ((sd->parent && \ + (sd->parent->flags & flag)) ? 1 : 0) struct sched_group { @@ -644,6 +652,7 @@ struct sched_group { struct sched_domain { /* These fields must be setup */ struct sched_domain *parent; /* top domain must be null terminated */ + struct sched_domain *child; /* bottom domain must be null terminated */ struct sched_group *groups; /* the balancing groups of the domain */ cpumask_t span; /* span of all CPUs in this domain */ unsigned long min_interval; /* Minimum balance interval ms */ diff --git a/include/linux/stat.h b/include/linux/stat.h index 8669291352d..679ef0d70b6 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -57,7 +57,7 @@ #include <linux/time.h> struct kstat { - unsigned long ino; + u64 ino; dev_t dev; umode_t mode; unsigned int nlink; diff --git a/include/linux/topology.h b/include/linux/topology.h index ec1eca85290..da508d1998e 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -89,6 +89,7 @@ #define SD_SIBLING_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 1, \ .max_interval = 2, \ @@ -114,11 +115,44 @@ #endif #endif /* CONFIG_SCHED_SMT */ +#ifdef CONFIG_SCHED_MC +/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */ +#ifndef SD_MC_INIT +#define SD_MC_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 1, \ + .max_interval = 4, \ + .busy_factor = 64, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .per_cpu_gain = 100, \ + .busy_idx = 2, \ + .idle_idx = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_NEWIDLE \ + | SD_BALANCE_EXEC \ + | SD_WAKE_AFFINE \ + | SD_SHARE_PKG_RESOURCES\ + | BALANCE_FOR_MC_POWER, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} +#endif +#endif /* CONFIG_SCHED_MC */ + /* Common values for CPUs */ #ifndef SD_CPU_INIT #define SD_CPU_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 1, \ .max_interval = 4, \ @@ -135,7 +169,7 @@ | SD_BALANCE_NEWIDLE \ | SD_BALANCE_EXEC \ | SD_WAKE_AFFINE \ - | BALANCE_FOR_POWER, \ + | BALANCE_FOR_PKG_POWER,\ .last_balance = jiffies, \ .balance_interval = 1, \ .nr_balance_failed = 0, \ @@ -146,6 +180,7 @@ #define SD_ALLNODES_INIT (struct sched_domain) { \ .span = CPU_MASK_NONE, \ .parent = NULL, \ + .child = NULL, \ .groups = NULL, \ .min_interval = 64, \ .max_interval = 64*num_online_cpus(), \ @@ -165,15 +200,6 @@ .nr_balance_failed = 0, \ } -#ifdef CONFIG_SCHED_MC -#ifndef SD_MC_INIT -/* for now its same as SD_CPU_INIT. - * TBD: Tune Domain parameters! - */ -#define SD_MC_INIT SD_CPU_INIT -#endif -#endif - #ifdef CONFIG_NUMA #ifndef SD_NODE_INIT #error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!! diff --git a/include/video/sstfb.h b/include/video/sstfb.h index 3570f9c9b11..5dbf5e7e50a 100644 --- a/include/video/sstfb.h +++ b/include/video/sstfb.h @@ -68,10 +68,6 @@ # define print_var(X,Y...) #endif -#define eprintk(X...) printk(KERN_ERR "sstfb: " X) -#define iprintk(X...) printk(KERN_INFO "sstfb: " X) -#define wprintk(X...) printk(KERN_WARNING "sstfb: " X) - #define BIT(x) (1ul<<(x)) #define POW2(x) (1ul<<(x)) diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c index 2429e1bf8c6..753dc54a664 100644 --- a/init/do_mounts_md.c +++ b/init/do_mounts_md.c @@ -20,7 +20,7 @@ static struct { int level; int chunk; char *device_names; -} md_setup_args[MAX_MD_DEVS] __initdata; +} md_setup_args[256] __initdata; static int md_setup_ents __initdata; @@ -61,10 +61,6 @@ static int __init md_setup(char *str) return 0; } str1 = str; - if (minor >= MAX_MD_DEVS) { - printk(KERN_WARNING "md: md=%d, Minor device number too high.\n", minor); - return 0; - } for (ent=0 ; ent< md_setup_ents ; ent++) if (md_setup_args[ent].minor == minor && md_setup_args[ent].partitioned == partitioned) { @@ -72,7 +68,7 @@ static int __init md_setup(char *str) "Replacing previous definition.\n", partitioned?"d":"", minor); break; } - if (ent >= MAX_MD_DEVS) { + if (ent >= ARRAY_SIZE(md_setup_args)) { printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor); return 0; } diff --git a/kernel/dma.c b/kernel/dma.c index aef0a45b789..2020644c938 100644 --- a/kernel/dma.c +++ b/kernel/dma.c @@ -62,6 +62,11 @@ static struct dma_chan dma_chan_busy[MAX_DMA_CHANNELS] = { }; +/** + * request_dma - request and reserve a system DMA channel + * @dmanr: DMA channel number + * @device_id: reserving device ID string, used in /proc/dma + */ int request_dma(unsigned int dmanr, const char * device_id) { if (dmanr >= MAX_DMA_CHANNELS) @@ -76,7 +81,10 @@ int request_dma(unsigned int dmanr, const char * device_id) return 0; } /* request_dma */ - +/** + * free_dma - free a reserved system DMA channel + * @dmanr: DMA channel number + */ void free_dma(unsigned int dmanr) { if (dmanr >= MAX_DMA_CHANNELS) { diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index 342bca62c49..eeac3e313b2 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -69,6 +69,15 @@ static inline int is_kernel(unsigned long addr) return in_gate_area_no_task(addr); } +static int is_ksym_addr(unsigned long addr) +{ + if (all_var) + return is_kernel(addr); + + return is_kernel_text(addr) || is_kernel_inittext(addr) || + is_kernel_extratext(addr); +} + /* expand a compressed symbol data into the resulting uncompressed string, given the offset to where the symbol is in the compressed stream */ static unsigned int kallsyms_expand_symbol(unsigned int off, char *result) @@ -155,6 +164,73 @@ unsigned long kallsyms_lookup_name(const char *name) return module_kallsyms_lookup_name(name); } +static unsigned long get_symbol_pos(unsigned long addr, + unsigned long *symbolsize, + unsigned long *offset) +{ + unsigned long symbol_start = 0, symbol_end = 0; + unsigned long i, low, high, mid; + + /* This kernel should never had been booted. */ + BUG_ON(!kallsyms_addresses); + + /* do a binary search on the sorted kallsyms_addresses array */ + low = 0; + high = kallsyms_num_syms; + + while (high - low > 1) { + mid = (low + high) / 2; + if (kallsyms_addresses[mid] <= addr) + low = mid; + else + high = mid; + } + + /* + * search for the first aliased symbol. Aliased + * symbols are symbols with the same address + */ + while (low && kallsyms_addresses[low-1] == kallsyms_addresses[low]) + --low; + + symbol_start = kallsyms_addresses[low]; + + /* Search for next non-aliased symbol */ + for (i = low + 1; i < kallsyms_num_syms; i++) { + if (kallsyms_addresses[i] > symbol_start) { + symbol_end = kallsyms_addresses[i]; + break; + } + } + + /* if we found no next symbol, we use the end of the section */ + if (!symbol_end) { + if (is_kernel_inittext(addr)) + symbol_end = (unsigned long)_einittext; + else if (all_var) + symbol_end = (unsigned long)_end; + else + symbol_end = (unsigned long)_etext; + } + + *symbolsize = symbol_end - symbol_start; + *offset = addr - symbol_start; + + return low; +} + +/* + * Lookup an address but don't bother to find any names. + */ +int kallsyms_lookup_size_offset(unsigned long addr, unsigned long *symbolsize, + unsigned long *offset) +{ + if (is_ksym_addr(addr)) + return !!get_symbol_pos(addr, symbolsize, offset); + + return !!module_address_lookup(addr, symbolsize, offset, NULL); +} + /* * Lookup an address * - modname is set to NULL if it's in the kernel @@ -167,57 +243,18 @@ const char *kallsyms_lookup(unsigned long addr, unsigned long *offset, char **modname, char *namebuf) { - unsigned long i, low, high, mid; const char *msym; - /* This kernel should never had been booted. */ - BUG_ON(!kallsyms_addresses); - namebuf[KSYM_NAME_LEN] = 0; namebuf[0] = 0; - if ((all_var && is_kernel(addr)) || - (!all_var && (is_kernel_text(addr) || is_kernel_inittext(addr) || - is_kernel_extratext(addr)))) { - unsigned long symbol_end = 0; - - /* do a binary search on the sorted kallsyms_addresses array */ - low = 0; - high = kallsyms_num_syms; - - while (high-low > 1) { - mid = (low + high) / 2; - if (kallsyms_addresses[mid] <= addr) low = mid; - else high = mid; - } - - /* search for the first aliased symbol. Aliased symbols are - symbols with the same address */ - while (low && kallsyms_addresses[low - 1] == kallsyms_addresses[low]) - --low; + if (is_ksym_addr(addr)) { + unsigned long pos; + pos = get_symbol_pos(addr, symbolsize, offset); /* Grab name */ - kallsyms_expand_symbol(get_symbol_offset(low), namebuf); - - /* Search for next non-aliased symbol */ - for (i = low + 1; i < kallsyms_num_syms; i++) { - if (kallsyms_addresses[i] > kallsyms_addresses[low]) { - symbol_end = kallsyms_addresses[i]; - break; - } - } - - /* if we found no next symbol, we use the end of the section */ - if (!symbol_end) { - if (is_kernel_inittext(addr)) - symbol_end = (unsigned long)_einittext; - else - symbol_end = all_var ? (unsigned long)_end : (unsigned long)_etext; - } - - *symbolsize = symbol_end - kallsyms_addresses[low]; + kallsyms_expand_symbol(get_symbol_offset(pos), namebuf); *modname = NULL; - *offset = addr - kallsyms_addresses[low]; return namebuf; } diff --git a/kernel/module.c b/kernel/module.c index 7c77a0a9275..7f60e782de1 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2040,7 +2040,8 @@ const char *module_address_lookup(unsigned long addr, list_for_each_entry(mod, &modules, list) { if (within(addr, mod->module_init, mod->init_size) || within(addr, mod->module_core, mod->core_size)) { - *modname = mod->name; + if (modname) + *modname = mod->name; return get_ksymbol(mod, addr, size, offset); } } diff --git a/kernel/resource.c b/kernel/resource.c index 9db38a1a752..6de60c12143 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -193,6 +193,13 @@ static int __release_resource(struct resource *old) return -EINVAL; } +/** + * request_resource - request and reserve an I/O or memory resource + * @root: root resource descriptor + * @new: resource descriptor desired by caller + * + * Returns 0 for success, negative error code on error. + */ int request_resource(struct resource *root, struct resource *new) { struct resource *conflict; @@ -205,6 +212,15 @@ int request_resource(struct resource *root, struct resource *new) EXPORT_SYMBOL(request_resource); +/** + * ____request_resource - reserve a resource, with resource conflict returned + * @root: root resource descriptor + * @new: resource descriptor desired by caller + * + * Returns: + * On success, NULL is returned. + * On error, a pointer to the conflicting resource is returned. + */ struct resource *____request_resource(struct resource *root, struct resource *new) { struct resource *conflict; @@ -217,6 +233,10 @@ struct resource *____request_resource(struct resource *root, struct resource *ne EXPORT_SYMBOL(____request_resource); +/** + * release_resource - release a previously reserved resource + * @old: resource pointer + */ int release_resource(struct resource *old) { int retval; @@ -315,8 +335,16 @@ static int find_resource(struct resource *root, struct resource *new, return -EBUSY; } -/* - * Allocate empty slot in the resource tree given range and alignment. +/** + * allocate_resource - allocate empty slot in the resource tree given range & alignment + * @root: root resource descriptor + * @new: resource descriptor desired by caller + * @size: requested resource region size + * @min: minimum size to allocate + * @max: maximum size to allocate + * @align: alignment requested, in bytes + * @alignf: alignment function, optional, called if not NULL + * @alignf_data: arbitrary data to pass to the @alignf function */ int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, @@ -407,10 +435,15 @@ int insert_resource(struct resource *parent, struct resource *new) return result; } -/* +/** + * adjust_resource - modify a resource's start and size + * @res: resource to modify + * @start: new start value + * @size: new size + * * Given an existing resource, change its start and size to match the - * arguments. Returns -EBUSY if it can't fit. Existing children of - * the resource are assumed to be immutable. + * arguments. Returns 0 on success, -EBUSY if it can't fit. + * Existing children of the resource are assumed to be immutable. */ int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size) { @@ -456,11 +489,19 @@ EXPORT_SYMBOL(adjust_resource); * Note how this, unlike the above, knows about * the IO flag meanings (busy etc). * - * Request-region creates a new busy region. + * request_region creates a new busy region. * - * Check-region returns non-zero if the area is already busy + * check_region returns non-zero if the area is already busy. * - * Release-region releases a matching busy region. + * release_region releases a matching busy region. + */ + +/** + * __request_region - create a new busy resource region + * @parent: parent resource descriptor + * @start: resource start address + * @n: resource region size + * @name: reserving caller's ID string */ struct resource * __request_region(struct resource *parent, resource_size_t start, resource_size_t n, @@ -497,9 +538,23 @@ struct resource * __request_region(struct resource *parent, } return res; } - EXPORT_SYMBOL(__request_region); +/** + * __check_region - check if a resource region is busy or free + * @parent: parent resource descriptor + * @start: resource start address + * @n: resource region size + * + * Returns 0 if the region is free at the moment it is checked, + * returns %-EBUSY if the region is busy. + * + * NOTE: + * This function is deprecated because its use is racy. + * Even if it returns 0, a subsequent call to request_region() + * may fail because another driver etc. just allocated the region. + * Do NOT use it. It will be removed from the kernel. + */ int __check_region(struct resource *parent, resource_size_t start, resource_size_t n) { @@ -513,9 +568,16 @@ int __check_region(struct resource *parent, resource_size_t start, kfree(res); return 0; } - EXPORT_SYMBOL(__check_region); +/** + * __release_region - release a previously reserved resource region + * @parent: parent resource descriptor + * @start: resource start address + * @n: resource region size + * + * The described resource region must match a currently busy region. + */ void __release_region(struct resource *parent, resource_size_t start, resource_size_t n) { @@ -553,7 +615,6 @@ void __release_region(struct resource *parent, resource_size_t start, "<%016llx-%016llx>\n", (unsigned long long)start, (unsigned long long)end); } - EXPORT_SYMBOL(__release_region); /* diff --git a/kernel/sched.c b/kernel/sched.c index e4e54e86f4a..53608a59d6e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1232,7 +1232,7 @@ nextgroup: } /* - * find_idlest_queue - find the idlest runqueue among the cpus in group. + * find_idlest_cpu - find the idlest cpu among the cpus in group. */ static int find_idlest_cpu(struct sched_group *group, struct task_struct *p, int this_cpu) @@ -1286,21 +1286,29 @@ static int sched_balance_self(int cpu, int flag) while (sd) { cpumask_t span; struct sched_group *group; - int new_cpu; - int weight; + int new_cpu, weight; + + if (!(sd->flags & flag)) { + sd = sd->child; + continue; + } span = sd->span; group = find_idlest_group(sd, t, cpu); - if (!group) - goto nextlevel; + if (!group) { + sd = sd->child; + continue; + } new_cpu = find_idlest_cpu(group, t, cpu); - if (new_cpu == -1 || new_cpu == cpu) - goto nextlevel; + if (new_cpu == -1 || new_cpu == cpu) { + /* Now try balancing at a lower domain level of cpu */ + sd = sd->child; + continue; + } - /* Now try balancing at a lower domain level */ + /* Now try balancing at a lower domain level of new_cpu */ cpu = new_cpu; -nextlevel: sd = NULL; weight = cpus_weight(span); for_each_domain(cpu, tmp) { @@ -2533,8 +2541,14 @@ static int load_balance(int this_cpu, struct rq *this_rq, struct rq *busiest; cpumask_t cpus = CPU_MASK_ALL; + /* + * When power savings policy is enabled for the parent domain, idle + * sibling can pick up load irrespective of busy siblings. In this case, + * let the state of idle sibling percolate up as IDLE, instead of + * portraying it as NOT_IDLE. + */ if (idle != NOT_IDLE && sd->flags & SD_SHARE_CPUPOWER && - !sched_smt_power_savings) + !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) sd_idle = 1; schedstat_inc(sd, lb_cnt[idle]); @@ -2630,7 +2644,7 @@ redo: } if (!nr_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER && - !sched_smt_power_savings) + !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) return -1; return nr_moved; @@ -2646,7 +2660,7 @@ out_one_pinned: sd->balance_interval *= 2; if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER && - !sched_smt_power_savings) + !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) return -1; return 0; } @@ -2668,7 +2682,14 @@ load_balance_newidle(int this_cpu, struct rq *this_rq, struct sched_domain *sd) int sd_idle = 0; cpumask_t cpus = CPU_MASK_ALL; - if (sd->flags & SD_SHARE_CPUPOWER && !sched_smt_power_savings) + /* + * When power savings policy is enabled for the parent domain, idle + * sibling can pick up load irrespective of busy siblings. In this case, + * let the state of idle sibling percolate up as IDLE, instead of + * portraying it as NOT_IDLE. + */ + if (sd->flags & SD_SHARE_CPUPOWER && + !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) sd_idle = 1; schedstat_inc(sd, lb_cnt[NEWLY_IDLE]); @@ -2709,7 +2730,8 @@ redo: if (!nr_moved) { schedstat_inc(sd, lb_failed[NEWLY_IDLE]); - if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER) + if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER && + !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) return -1; } else sd->nr_balance_failed = 0; @@ -2719,7 +2741,7 @@ redo: out_balanced: schedstat_inc(sd, lb_balanced[NEWLY_IDLE]); if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER && - !sched_smt_power_savings) + !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) return -1; sd->nr_balance_failed = 0; @@ -4817,7 +4839,7 @@ void show_state(void) * NOTE: this function does not set the idle thread's NEED_RESCHED * flag, to make booting more robust. */ -void __devinit init_idle(struct task_struct *idle, int cpu) +void __cpuinit init_idle(struct task_struct *idle, int cpu) { struct rq *rq = cpu_rq(cpu); unsigned long flags; @@ -5392,7 +5414,9 @@ static int sd_degenerate(struct sched_domain *sd) if (sd->flags & (SD_LOAD_BALANCE | SD_BALANCE_NEWIDLE | SD_BALANCE_FORK | - SD_BALANCE_EXEC)) { + SD_BALANCE_EXEC | + SD_SHARE_CPUPOWER | + SD_SHARE_PKG_RESOURCES)) { if (sd->groups != sd->groups->next) return 0; } @@ -5426,7 +5450,9 @@ sd_parent_degenerate(struct sched_domain *sd, struct sched_domain *parent) pflags &= ~(SD_LOAD_BALANCE | SD_BALANCE_NEWIDLE | SD_BALANCE_FORK | - SD_BALANCE_EXEC); + SD_BALANCE_EXEC | + SD_SHARE_CPUPOWER | + SD_SHARE_PKG_RESOURCES); } if (~cflags & pflags) return 0; @@ -5448,12 +5474,18 @@ static void cpu_attach_domain(struct sched_domain *sd, int cpu) struct sched_domain *parent = tmp->parent; if (!parent) break; - if (sd_parent_degenerate(tmp, parent)) + if (sd_parent_degenerate(tmp, parent)) { tmp->parent = parent->parent; + if (parent->parent) + parent->parent->child = tmp; + } } - if (sd && sd_degenerate(sd)) + if (sd && sd_degenerate(sd)) { sd = sd->parent; + if (sd) + sd->child = NULL; + } sched_domain_debug(sd, cpu); @@ -5461,7 +5493,7 @@ static void cpu_attach_domain(struct sched_domain *sd, int cpu) } /* cpus with isolated domains */ -static cpumask_t __devinitdata cpu_isolated_map = CPU_MASK_NONE; +static cpumask_t __cpuinitdata cpu_isolated_map = CPU_MASK_NONE; /* Setup the mask of cpus configured for isolated domains */ static int __init isolated_cpu_setup(char *str) @@ -5489,15 +5521,17 @@ __setup ("isolcpus=", isolated_cpu_setup); * covered by the given span, and will set each group's ->cpumask correctly, * and ->cpu_power to 0. */ -static void init_sched_build_groups(struct sched_group groups[], cpumask_t span, - int (*group_fn)(int cpu)) +static void +init_sched_build_groups(struct sched_group groups[], cpumask_t span, + const cpumask_t *cpu_map, + int (*group_fn)(int cpu, const cpumask_t *cpu_map)) { struct sched_group *first = NULL, *last = NULL; cpumask_t covered = CPU_MASK_NONE; int i; for_each_cpu_mask(i, span) { - int group = group_fn(i); + int group = group_fn(i, cpu_map); struct sched_group *sg = &groups[group]; int j; @@ -5508,7 +5542,7 @@ static void init_sched_build_groups(struct sched_group groups[], cpumask_t span, sg->cpu_power = 0; for_each_cpu_mask(j, span) { - if (group_fn(j) != group) + if (group_fn(j, cpu_map) != group) continue; cpu_set(j, covered); @@ -5975,13 +6009,15 @@ static void calibrate_migration_costs(const cpumask_t *cpu_map) #endif ); if (system_state == SYSTEM_BOOTING) { - printk("migration_cost="); - for (distance = 0; distance <= max_distance; distance++) { - if (distance) - printk(","); - printk("%ld", (long)migration_cost[distance] / 1000); + if (num_online_cpus() > 1) { + printk("migration_cost="); + for (distance = 0; distance <= max_distance; distance++) { + if (distance) + printk(","); + printk("%ld", (long)migration_cost[distance] / 1000); + } + printk("\n"); } - printk("\n"); } j1 = jiffies; if (migration_debug) @@ -6084,7 +6120,7 @@ int sched_smt_power_savings = 0, sched_mc_power_savings = 0; static DEFINE_PER_CPU(struct sched_domain, cpu_domains); static struct sched_group sched_group_cpus[NR_CPUS]; -static int cpu_to_cpu_group(int cpu) +static int cpu_to_cpu_group(int cpu, const cpumask_t *cpu_map) { return cpu; } @@ -6095,31 +6131,36 @@ static int cpu_to_cpu_group(int cpu) */ #ifdef CONFIG_SCHED_MC static DEFINE_PER_CPU(struct sched_domain, core_domains); -static struct sched_group *sched_group_core_bycpu[NR_CPUS]; +static struct sched_group sched_group_core[NR_CPUS]; #endif #if defined(CONFIG_SCHED_MC) && defined(CONFIG_SCHED_SMT) -static int cpu_to_core_group(int cpu) +static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map) { - return first_cpu(cpu_sibling_map[cpu]); + cpumask_t mask = cpu_sibling_map[cpu]; + cpus_and(mask, mask, *cpu_map); + return first_cpu(mask); } #elif defined(CONFIG_SCHED_MC) -static int cpu_to_core_group(int cpu) +static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map) { return cpu; } #endif static DEFINE_PER_CPU(struct sched_domain, phys_domains); -static struct sched_group *sched_group_phys_bycpu[NR_CPUS]; +static struct sched_group sched_group_phys[NR_CPUS]; -static int cpu_to_phys_group(int cpu) +static int cpu_to_phys_group(int cpu, const cpumask_t *cpu_map) { #ifdef CONFIG_SCHED_MC cpumask_t mask = cpu_coregroup_map(cpu); + cpus_and(mask, mask, *cpu_map); return first_cpu(mask); #elif defined(CONFIG_SCHED_SMT) - return first_cpu(cpu_sibling_map[cpu]); + cpumask_t mask = cpu_sibling_map[cpu]; + cpus_and(mask, mask, *cpu_map); + return first_cpu(mask); #else return cpu; #endif @@ -6137,7 +6178,7 @@ static struct sched_group **sched_group_nodes_bycpu[NR_CPUS]; static DEFINE_PER_CPU(struct sched_domain, allnodes_domains); static struct sched_group *sched_group_allnodes_bycpu[NR_CPUS]; -static int cpu_to_allnodes_group(int cpu) +static int cpu_to_allnodes_group(int cpu, const cpumask_t *cpu_map) { return cpu_to_node(cpu); } @@ -6169,12 +6210,11 @@ next_sg: } #endif +#ifdef CONFIG_NUMA /* Free memory allocated for various sched_group structures */ static void free_sched_groups(const cpumask_t *cpu_map) { - int cpu; -#ifdef CONFIG_NUMA - int i; + int cpu, i; for_each_cpu_mask(cpu, *cpu_map) { struct sched_group *sched_group_allnodes @@ -6211,19 +6251,63 @@ next_sg: kfree(sched_group_nodes); sched_group_nodes_bycpu[cpu] = NULL; } +} +#else +static void free_sched_groups(const cpumask_t *cpu_map) +{ +} #endif - for_each_cpu_mask(cpu, *cpu_map) { - if (sched_group_phys_bycpu[cpu]) { - kfree(sched_group_phys_bycpu[cpu]); - sched_group_phys_bycpu[cpu] = NULL; - } -#ifdef CONFIG_SCHED_MC - if (sched_group_core_bycpu[cpu]) { - kfree(sched_group_core_bycpu[cpu]); - sched_group_core_bycpu[cpu] = NULL; - } -#endif + +/* + * Initialize sched groups cpu_power. + * + * cpu_power indicates the capacity of sched group, which is used while + * distributing the load between different sched groups in a sched domain. + * Typically cpu_power for all the groups in a sched domain will be same unless + * there are asymmetries in the topology. If there are asymmetries, group + * having more cpu_power will pickup more load compared to the group having + * less cpu_power. + * + * cpu_power will be a multiple of SCHED_LOAD_SCALE. This multiple represents + * the maximum number of tasks a group can handle in the presence of other idle + * or lightly loaded groups in the same sched domain. + */ +static void init_sched_groups_power(int cpu, struct sched_domain *sd) +{ + struct sched_domain *child; + struct sched_group *group; + + WARN_ON(!sd || !sd->groups); + + if (cpu != first_cpu(sd->groups->cpumask)) + return; + + child = sd->child; + + /* + * For perf policy, if the groups in child domain share resources + * (for example cores sharing some portions of the cache hierarchy + * or SMT), then set this domain groups cpu_power such that each group + * can handle only one task, when there are other idle groups in the + * same sched domain. + */ + if (!child || (!(sd->flags & SD_POWERSAVINGS_BALANCE) && + (child->flags & + (SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES)))) { + sd->groups->cpu_power = SCHED_LOAD_SCALE; + return; } + + sd->groups->cpu_power = 0; + + /* + * add cpu_power of each child group to this groups cpu_power + */ + group = child->groups; + do { + sd->groups->cpu_power += group->cpu_power; + group = group->next; + } while (group != child->groups); } /* @@ -6233,10 +6317,7 @@ next_sg: static int build_sched_domains(const cpumask_t *cpu_map) { int i; - struct sched_group *sched_group_phys = NULL; -#ifdef CONFIG_SCHED_MC - struct sched_group *sched_group_core = NULL; -#endif + struct sched_domain *sd; #ifdef CONFIG_NUMA struct sched_group **sched_group_nodes = NULL; struct sched_group *sched_group_allnodes = NULL; @@ -6268,9 +6349,10 @@ static int build_sched_domains(const cpumask_t *cpu_map) > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) { if (!sched_group_allnodes) { sched_group_allnodes - = kmalloc(sizeof(struct sched_group) - * MAX_NUMNODES, - GFP_KERNEL); + = kmalloc_node(sizeof(struct sched_group) + * MAX_NUMNODES, + GFP_KERNEL, + cpu_to_node(i)); if (!sched_group_allnodes) { printk(KERN_WARNING "Can not alloc allnodes sched group\n"); @@ -6282,7 +6364,7 @@ static int build_sched_domains(const cpumask_t *cpu_map) sd = &per_cpu(allnodes_domains, i); *sd = SD_ALLNODES_INIT; sd->span = *cpu_map; - group = cpu_to_allnodes_group(i); + group = cpu_to_allnodes_group(i, cpu_map); sd->groups = &sched_group_allnodes[group]; p = sd; } else @@ -6292,60 +6374,42 @@ static int build_sched_domains(const cpumask_t *cpu_map) *sd = SD_NODE_INIT; sd->span = sched_domain_node_span(cpu_to_node(i)); sd->parent = p; + if (p) + p->child = sd; cpus_and(sd->span, sd->span, *cpu_map); #endif - if (!sched_group_phys) { - sched_group_phys - = kmalloc(sizeof(struct sched_group) * NR_CPUS, - GFP_KERNEL); - if (!sched_group_phys) { - printk (KERN_WARNING "Can not alloc phys sched" - "group\n"); - goto error; - } - sched_group_phys_bycpu[i] = sched_group_phys; - } - p = sd; sd = &per_cpu(phys_domains, i); - group = cpu_to_phys_group(i); + group = cpu_to_phys_group(i, cpu_map); *sd = SD_CPU_INIT; sd->span = nodemask; sd->parent = p; + if (p) + p->child = sd; sd->groups = &sched_group_phys[group]; #ifdef CONFIG_SCHED_MC - if (!sched_group_core) { - sched_group_core - = kmalloc(sizeof(struct sched_group) * NR_CPUS, - GFP_KERNEL); - if (!sched_group_core) { - printk (KERN_WARNING "Can not alloc core sched" - "group\n"); - goto error; - } - sched_group_core_bycpu[i] = sched_group_core; - } - p = sd; sd = &per_cpu(core_domains, i); - group = cpu_to_core_group(i); + group = cpu_to_core_group(i, cpu_map); *sd = SD_MC_INIT; sd->span = cpu_coregroup_map(i); cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; + p->child = sd; sd->groups = &sched_group_core[group]; #endif #ifdef CONFIG_SCHED_SMT p = sd; sd = &per_cpu(cpu_domains, i); - group = cpu_to_cpu_group(i); + group = cpu_to_cpu_group(i, cpu_map); *sd = SD_SIBLING_INIT; sd->span = cpu_sibling_map[i]; cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; + p->child = sd; sd->groups = &sched_group_cpus[group]; #endif } @@ -6359,7 +6423,7 @@ static int build_sched_domains(const cpumask_t *cpu_map) continue; init_sched_build_groups(sched_group_cpus, this_sibling_map, - &cpu_to_cpu_group); + cpu_map, &cpu_to_cpu_group); } #endif @@ -6371,7 +6435,7 @@ static int build_sched_domains(const cpumask_t *cpu_map) if (i != first_cpu(this_core_map)) continue; init_sched_build_groups(sched_group_core, this_core_map, - &cpu_to_core_group); + cpu_map, &cpu_to_core_group); } #endif @@ -6385,14 +6449,14 @@ static int build_sched_domains(const cpumask_t *cpu_map) continue; init_sched_build_groups(sched_group_phys, nodemask, - &cpu_to_phys_group); + cpu_map, &cpu_to_phys_group); } #ifdef CONFIG_NUMA /* Set up node groups */ if (sched_group_allnodes) init_sched_build_groups(sched_group_allnodes, *cpu_map, - &cpu_to_allnodes_group); + cpu_map, &cpu_to_allnodes_group); for (i = 0; i < MAX_NUMNODES; i++) { /* Set up node groups */ @@ -6464,72 +6528,20 @@ static int build_sched_domains(const cpumask_t *cpu_map) /* Calculate CPU power for physical packages and nodes */ #ifdef CONFIG_SCHED_SMT for_each_cpu_mask(i, *cpu_map) { - struct sched_domain *sd; sd = &per_cpu(cpu_domains, i); - sd->groups->cpu_power = SCHED_LOAD_SCALE; + init_sched_groups_power(i, sd); } #endif #ifdef CONFIG_SCHED_MC for_each_cpu_mask(i, *cpu_map) { - int power; - struct sched_domain *sd; sd = &per_cpu(core_domains, i); - if (sched_smt_power_savings) - power = SCHED_LOAD_SCALE * cpus_weight(sd->groups->cpumask); - else - power = SCHED_LOAD_SCALE + (cpus_weight(sd->groups->cpumask)-1) - * SCHED_LOAD_SCALE / 10; - sd->groups->cpu_power = power; + init_sched_groups_power(i, sd); } #endif for_each_cpu_mask(i, *cpu_map) { - struct sched_domain *sd; -#ifdef CONFIG_SCHED_MC sd = &per_cpu(phys_domains, i); - if (i != first_cpu(sd->groups->cpumask)) - continue; - - sd->groups->cpu_power = 0; - if (sched_mc_power_savings || sched_smt_power_savings) { - int j; - - for_each_cpu_mask(j, sd->groups->cpumask) { - struct sched_domain *sd1; - sd1 = &per_cpu(core_domains, j); - /* - * for each core we will add once - * to the group in physical domain - */ - if (j != first_cpu(sd1->groups->cpumask)) - continue; - - if (sched_smt_power_savings) - sd->groups->cpu_power += sd1->groups->cpu_power; - else - sd->groups->cpu_power += SCHED_LOAD_SCALE; - } - } else - /* - * This has to be < 2 * SCHED_LOAD_SCALE - * Lets keep it SCHED_LOAD_SCALE, so that - * while calculating NUMA group's cpu_power - * we can simply do - * numa_group->cpu_power += phys_group->cpu_power; - * - * See "only add power once for each physical pkg" - * comment below - */ - sd->groups->cpu_power = SCHED_LOAD_SCALE; -#else - int power; - sd = &per_cpu(phys_domains, i); - if (sched_smt_power_savings) - power = SCHED_LOAD_SCALE * cpus_weight(sd->groups->cpumask); - else - power = SCHED_LOAD_SCALE; - sd->groups->cpu_power = power; -#endif + init_sched_groups_power(i, sd); } #ifdef CONFIG_NUMA @@ -6537,7 +6549,7 @@ static int build_sched_domains(const cpumask_t *cpu_map) init_numa_sched_groups_power(sched_group_nodes[i]); if (sched_group_allnodes) { - int group = cpu_to_allnodes_group(first_cpu(*cpu_map)); + int group = cpu_to_allnodes_group(first_cpu(*cpu_map), cpu_map); struct sched_group *sg = &sched_group_allnodes[group]; init_numa_sched_groups_power(sg); @@ -6563,9 +6575,11 @@ static int build_sched_domains(const cpumask_t *cpu_map) return 0; +#ifdef CONFIG_NUMA error: free_sched_groups(cpu_map); return -ENOMEM; +#endif } /* * Set up scheduler domains and groups. Callers must hold the hotplug lock. @@ -6747,11 +6761,20 @@ static int update_sched_domains(struct notifier_block *nfb, void __init sched_init_smp(void) { + cpumask_t non_isolated_cpus; + lock_cpu_hotplug(); arch_init_sched_domains(&cpu_online_map); + cpus_andnot(non_isolated_cpus, cpu_online_map, cpu_isolated_map); + if (cpus_empty(non_isolated_cpus)) + cpu_set(smp_processor_id(), non_isolated_cpus); unlock_cpu_hotplug(); /* XXX: Theoretical race here - CPU may be hotplugged now */ hotcpu_notifier(update_sched_domains, 0); + + /* Move init over to a non-isolated CPU */ + if (set_cpus_allowed(current, non_isolated_cpus) < 0) + BUG(); } #else void __init sched_init_smp(void) diff --git a/lib/sort.c b/lib/sort.c index 5f3b51ffa1d..488788b341c 100644 --- a/lib/sort.c +++ b/lib/sort.c @@ -49,15 +49,15 @@ void sort(void *base, size_t num, size_t size, void (*swap)(void *, void *, int size)) { /* pre-scale counters for performance */ - int i = (num/2) * size, n = num * size, c, r; + int i = (num/2 - 1) * size, n = num * size, c, r; if (!swap) swap = (size == 4 ? u32_swap : generic_swap); /* heapify */ for ( ; i >= 0; i -= size) { - for (r = i; r * 2 < n; r = c) { - c = r * 2; + for (r = i; r * 2 + size < n; r = c) { + c = r * 2 + size; if (c < n - size && cmp(base + c, base + c + size) < 0) c += size; if (cmp(base + r, base + c) >= 0) @@ -69,8 +69,8 @@ void sort(void *base, size_t num, size_t size, /* sort */ for (i = n - size; i >= 0; i -= size) { swap(base, base + i, size); - for (r = 0; r * 2 < i; r = c) { - c = r * 2; + for (r = 0; r * 2 + size < i; r = c) { + c = r * 2 + size; if (c < i - size && cmp(base + c, base + c + size) < 0) c += size; if (cmp(base + r, base + c) >= 0) diff --git a/scripts/.gitignore b/scripts/.gitignore index a234e524a49..a1f52cb4720 100644 --- a/scripts/.gitignore +++ b/scripts/.gitignore @@ -5,3 +5,4 @@ conmakehash kallsyms pnmtologo bin2c +unifdef diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index 4b2721ca97d..6c5469b1473 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -32,6 +32,10 @@ # Step 4 is solely used to allow module versioning in external modules, # where the CRC of each module is retrieved from the Module.symers file. +# KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined +# symbols in the final module linking stage +# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. +# This is solely usefull to speed up test compiles PHONY := _modpost _modpost: __modpost @@ -46,7 +50,8 @@ modulesymfile := $(KBUILD_EXTMOD)/Module.symvers __modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod))) modules := $(patsubst %.o,%.ko, $(wildcard $(__modules:.ko=.o))) -_modpost: $(modules) +# Stop after building .o files if NOFINAL is set. Makes compile tests quicker +_modpost: $(if $(KBUILD_MODPOST_NOFINAL), $(modules:.ko:.o),$(modules)) # Step 2), invoke modpost @@ -58,7 +63,7 @@ quiet_cmd_modpost = MODPOST $(words $(filter-out vmlinux FORCE, $^)) modules $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile) \ $(if $(KBUILD_EXTMOD),-I $(modulesymfile)) \ $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \ - $(if $(KBUILD_EXTMOD),-w) \ + $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w) \ $(wildcard vmlinux) $(filter-out FORCE,$^) PHONY += __modpost @@ -92,7 +97,7 @@ targets += $(modules:.ko=.mod.o) # Step 6), final link of the modules quiet_cmd_ld_ko_o = LD [M] $@ - cmd_ld_ko_o = $(LD) $(LDFLAGS) $(LDFLAGS_MODULE) -o $@ \ + cmd_ld_ko_o = $(LD) $(LDFLAGS) $(LDFLAGS_MODULE) -o $@ \ $(filter-out FORCE,$^) $(modules): %.ko :%.o %.mod.o FORCE diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index a90d3cc76bf..7e7e147875b 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -11,7 +11,6 @@ gconfig: $(obj)/gconf $< arch/$(ARCH)/Kconfig menuconfig: $(obj)/mconf - $(Q)$(MAKE) $(build)=scripts/kconfig/lxdialog $< arch/$(ARCH)/Kconfig config: $(obj)/conf @@ -81,6 +80,23 @@ help: @echo ' allyesconfig - New config where all options are accepted with yes' @echo ' allnoconfig - New config where all options are answered with no' +# lxdialog stuff +check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh + +# Use reursively expanded variables so we do not call gcc unless +# we really need to do so. (Do not call gcc as part of make mrproper) +HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) +HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) + +HOST_EXTRACFLAGS += -DLOCALE + +PHONY += $(obj)/dochecklxdialog +$(obj)/dochecklxdialog: + $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES) + +always := dochecklxdialog + + # =========================================================================== # Shared Makefile for the various kconfig executables: # conf: Used for defconfig, oldconfig and related targets @@ -92,11 +108,19 @@ help: # Based on GTK which needs to be installed to compile it # object files used by all kconfig flavours -hostprogs-y := conf mconf qconf gconf kxgettext +lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o +lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o + conf-objs := conf.o zconf.tab.o -mconf-objs := mconf.o zconf.tab.o +mconf-objs := mconf.o zconf.tab.o $(lxdialog) kxgettext-objs := kxgettext.o zconf.tab.o +hostprogs-y := conf qconf gconf kxgettext + +ifeq ($(MAKECMDGOALS),menuconfig) + hostprogs-y += mconf +endif + ifeq ($(MAKECMDGOALS),xconfig) qconf-target := 1 endif @@ -116,7 +140,6 @@ endif clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \ .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c -subdir- += lxdialog # Needed for systems without gettext KBUILD_HAVE_NLS := $(shell \ diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 69f96b398c2..66b15ef0293 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -517,7 +517,7 @@ int conf_write(const char *name) fclose(out); if (*tmpname) { - strcat(dirname, name ? name : conf_get_configname()); + strcat(dirname, basename); strcat(dirname, ".old"); rename(newname, dirname); if (rename(tmpname, newname)) diff --git a/scripts/kconfig/lxdialog/Makefile b/scripts/kconfig/lxdialog/Makefile deleted file mode 100644 index a8b02632624..00000000000 --- a/scripts/kconfig/lxdialog/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Makefile to build lxdialog package -# - -check-lxdialog := $(srctree)/$(src)/check-lxdialog.sh - -# Use reursively expanded variables so we do not call gcc unless -# we really need to do so. (Do not call gcc as part of make mrproper) -HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) -HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) - -HOST_EXTRACFLAGS += -DLOCALE - -PHONY += dochecklxdialog -$(obj)/dochecklxdialog: - $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES) - -hostprogs-y := lxdialog -always := $(hostprogs-y) dochecklxdialog - -lxdialog-objs := checklist.o menubox.o textbox.o yesno.o inputbox.o \ - util.o lxdialog.o msgbox.o diff --git a/scripts/kconfig/lxdialog/checklist.c b/scripts/kconfig/lxdialog/checklist.c index 79886413b6d..cf697080ddd 100644 --- a/scripts/kconfig/lxdialog/checklist.c +++ b/scripts/kconfig/lxdialog/checklist.c @@ -28,25 +28,25 @@ static int list_width, check_x, item_x; /* * Print list item */ -static void print_item(WINDOW * win, const char *item, int status, int choice, - int selected) +static void print_item(WINDOW * win, int choice, int selected) { int i; /* Clear 'residue' of last item */ - wattrset(win, menubox_attr); + wattrset(win, dlg.menubox.atr); wmove(win, choice, 0); for (i = 0; i < list_width; i++) waddch(win, ' '); wmove(win, choice, check_x); - wattrset(win, selected ? check_selected_attr : check_attr); - wprintw(win, "(%c)", status ? 'X' : ' '); - - wattrset(win, selected ? tag_selected_attr : tag_attr); - mvwaddch(win, choice, item_x, item[0]); - wattrset(win, selected ? item_selected_attr : item_attr); - waddstr(win, (char *)item + 1); + wattrset(win, selected ? dlg.check_selected.atr + : dlg.check.atr); + wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' '); + + wattrset(win, selected ? dlg.tag_selected.atr : dlg.tag.atr); + mvwaddch(win, choice, item_x, item_str()[0]); + wattrset(win, selected ? dlg.item_selected.atr : dlg.item.atr); + waddstr(win, (char *)item_str() + 1); if (selected) { wmove(win, choice, check_x + 1); wrefresh(win); @@ -62,11 +62,11 @@ static void print_arrows(WINDOW * win, int choice, int item_no, int scroll, wmove(win, y, x); if (scroll > 0) { - wattrset(win, uarrow_attr); + wattrset(win, dlg.uarrow.atr); waddch(win, ACS_UARROW); waddstr(win, "(-)"); } else { - wattrset(win, menubox_attr); + wattrset(win, dlg.menubox.atr); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); @@ -77,11 +77,11 @@ static void print_arrows(WINDOW * win, int choice, int item_no, int scroll, wmove(win, y, x); if ((height < item_no) && (scroll + choice < item_no - 1)) { - wattrset(win, darrow_attr); + wattrset(win, dlg.darrow.atr); waddch(win, ACS_DARROW); waddstr(win, "(+)"); } else { - wattrset(win, menubox_border_attr); + wattrset(win, dlg.menubox_border.atr); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); @@ -109,32 +109,29 @@ static void print_buttons(WINDOW * dialog, int height, int width, int selected) * in the style of radiolist (only one option turned on at a time). */ int dialog_checklist(const char *title, const char *prompt, int height, - int width, int list_height, int item_no, - const char *const *items) + int width, int list_height) { int i, x, y, box_x, box_y; - int key = 0, button = 0, choice = 0, scroll = 0, max_choice, *status; + int key = 0, button = 0, choice = 0, scroll = 0, max_choice; WINDOW *dialog, *list; - /* Allocate space for storing item on/off status */ - if ((status = malloc(sizeof(int) * item_no)) == NULL) { - endwin(); - fprintf(stderr, - "\nCan't allocate memory in dialog_checklist().\n"); - exit(-1); + /* which item to highlight */ + item_foreach() { + if (item_is_tag('X')) + choice = item_n(); + if (item_is_selected()) { + choice = item_n(); + break; + } } - /* Initializes status */ - for (i = 0; i < item_no; i++) { - status[i] = !strcasecmp(items[i * 3 + 2], "on"); - if ((!choice && status[i]) - || !strcasecmp(items[i * 3 + 2], "selected")) - choice = i + 1; - } - if (choice) - choice--; +do_resize: + if (getmaxy(stdscr) < (height + 6)) + return -ERRDISPLAYTOOSMALL; + if (getmaxx(stdscr) < (width + 6)) + return -ERRDISPLAYTOOSMALL; - max_choice = MIN(list_height, item_no); + max_choice = MIN(list_height, item_count()); /* center dialog box on screen */ x = (COLS - width) / 2; @@ -145,17 +142,18 @@ int dialog_checklist(const char *title, const char *prompt, int height, dialog = newwin(height, width, y, x); keypad(dialog, TRUE); - draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr); - wattrset(dialog, border_attr); + draw_box(dialog, 0, 0, height, width, + dlg.dialog.atr, dlg.border.atr); + wattrset(dialog, dlg.border.atr); mvwaddch(dialog, height - 3, 0, ACS_LTEE); for (i = 0; i < width - 2; i++) waddch(dialog, ACS_HLINE); - wattrset(dialog, dialog_attr); + wattrset(dialog, dlg.dialog.atr); waddch(dialog, ACS_RTEE); print_title(dialog, title, width); - wattrset(dialog, dialog_attr); + wattrset(dialog, dlg.dialog.atr); print_autowrap(dialog, prompt, width - 2, 1, 3); list_width = width - 6; @@ -170,12 +168,12 @@ int dialog_checklist(const char *title, const char *prompt, int height, /* draw a box around the list items */ draw_box(dialog, box_y, box_x, list_height + 2, list_width + 2, - menubox_border_attr, menubox_attr); + dlg.menubox_border.atr, dlg.menubox.atr); /* Find length of longest item in order to center checklist */ check_x = 0; - for (i = 0; i < item_no; i++) - check_x = MAX(check_x, +strlen(items[i * 3 + 1]) + 4); + item_foreach() + check_x = MAX(check_x, strlen(item_str()) + 4); check_x = (list_width - check_x) / 2; item_x = check_x + 4; @@ -187,14 +185,11 @@ int dialog_checklist(const char *title, const char *prompt, int height, /* Print the list */ for (i = 0; i < max_choice; i++) { - if (i != choice) - print_item(list, items[(scroll + i) * 3 + 1], - status[i + scroll], i, 0); + item_set(scroll + i); + print_item(list, i, i == choice); } - print_item(list, items[(scroll + choice) * 3 + 1], - status[choice + scroll], choice, 1); - print_arrows(dialog, choice, item_no, scroll, + print_arrows(dialog, choice, item_count(), scroll, box_y, box_x + check_x + 5, list_height); print_buttons(dialog, height, width, 0); @@ -203,13 +198,14 @@ int dialog_checklist(const char *title, const char *prompt, int height, wnoutrefresh(list); doupdate(); - while (key != ESC) { + while (key != KEY_ESC) { key = wgetch(dialog); - for (i = 0; i < max_choice; i++) - if (toupper(key) == - toupper(items[(scroll + i) * 3 + 1][0])) + for (i = 0; i < max_choice; i++) { + item_set(i + scroll); + if (toupper(key) == toupper(item_str()[0])) break; + } if (i < max_choice || key == KEY_UP || key == KEY_DOWN || key == '+' || key == '-') { @@ -220,15 +216,16 @@ int dialog_checklist(const char *title, const char *prompt, int height, /* Scroll list down */ if (list_height > 1) { /* De-highlight current first item */ - print_item(list, items[scroll * 3 + 1], - status[scroll], 0, FALSE); + item_set(scroll); + print_item(list, 0, FALSE); scrollok(list, TRUE); wscrl(list, -1); scrollok(list, FALSE); } scroll--; - print_item(list, items[scroll * 3 + 1], status[scroll], 0, TRUE); - print_arrows(dialog, choice, item_no, + item_set(scroll); + print_item(list, 0, TRUE); + print_arrows(dialog, choice, item_count(), scroll, box_y, box_x + check_x + 5, list_height); wnoutrefresh(dialog); @@ -239,23 +236,24 @@ int dialog_checklist(const char *title, const char *prompt, int height, i = choice - 1; } else if (key == KEY_DOWN || key == '+') { if (choice == max_choice - 1) { - if (scroll + choice >= item_no - 1) + if (scroll + choice >= item_count() - 1) continue; /* Scroll list up */ if (list_height > 1) { /* De-highlight current last item before scrolling up */ - print_item(list, items[(scroll + max_choice - 1) * 3 + 1], - status[scroll + max_choice - 1], - max_choice - 1, FALSE); + item_set(scroll + max_choice - 1); + print_item(list, + max_choice - 1, + FALSE); scrollok(list, TRUE); wscrl(list, 1); scrollok(list, FALSE); } scroll++; - print_item(list, items[(scroll + max_choice - 1) * 3 + 1], - status[scroll + max_choice - 1], max_choice - 1, TRUE); + item_set(scroll + max_choice - 1); + print_item(list, max_choice - 1, TRUE); - print_arrows(dialog, choice, item_no, + print_arrows(dialog, choice, item_count(), scroll, box_y, box_x + check_x + 5, list_height); wnoutrefresh(dialog); @@ -267,12 +265,12 @@ int dialog_checklist(const char *title, const char *prompt, int height, } if (i != choice) { /* De-highlight current item */ - print_item(list, items[(scroll + choice) * 3 + 1], - status[scroll + choice], choice, FALSE); + item_set(scroll + choice); + print_item(list, choice, FALSE); /* Highlight new item */ choice = i; - print_item(list, items[(scroll + choice) * 3 + 1], - status[scroll + choice], choice, TRUE); + item_set(scroll + choice); + print_item(list, choice, TRUE); wnoutrefresh(dialog); wrefresh(list); } @@ -282,10 +280,19 @@ int dialog_checklist(const char *title, const char *prompt, int height, case 'H': case 'h': case '?': - fprintf(stderr, "%s", items[(scroll + choice) * 3]); + button = 1; + /* fall-through */ + case 'S': + case 's': + case ' ': + case '\n': + item_foreach() + item_set_selected(0); + item_set(scroll + choice); + item_set_selected(1); + delwin(list); delwin(dialog); - free(status); - return 1; + return button; case TAB: case KEY_LEFT: case KEY_RIGHT: @@ -295,42 +302,24 @@ int dialog_checklist(const char *title, const char *prompt, int height, print_buttons(dialog, height, width, button); wrefresh(dialog); break; - case 'S': - case 's': - case ' ': - case '\n': - if (!button) { - if (!status[scroll + choice]) { - for (i = 0; i < item_no; i++) - status[i] = 0; - status[scroll + choice] = 1; - for (i = 0; i < max_choice; i++) - print_item(list, items[(scroll + i) * 3 + 1], - status[scroll + i], i, i == choice); - } - wnoutrefresh(dialog); - wrefresh(list); - - for (i = 0; i < item_no; i++) - if (status[i]) - fprintf(stderr, "%s", items[i * 3]); - } else - fprintf(stderr, "%s", items[(scroll + choice) * 3]); - delwin(dialog); - free(status); - return button; case 'X': case 'x': - key = ESC; - case ESC: + key = KEY_ESC; + break; + case KEY_ESC: + key = on_key_esc(dialog); break; + case KEY_RESIZE: + delwin(list); + delwin(dialog); + on_key_resize(); + goto do_resize; } /* Now, update everything... */ doupdate(); } - + delwin(list); delwin(dialog); - free(status); - return -1; /* ESC pressed */ + return key; /* ESC pressed */ } diff --git a/scripts/kconfig/lxdialog/colors.h b/scripts/kconfig/lxdialog/colors.h deleted file mode 100644 index db071df12bb..00000000000 --- a/scripts/kconfig/lxdialog/colors.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * colors.h -- color attribute definitions - * - * AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Default color definitions - * - * *_FG = foreground - * *_BG = background - * *_HL = highlight? - */ -#define SCREEN_FG COLOR_CYAN -#define SCREEN_BG COLOR_BLUE -#define SCREEN_HL TRUE - -#define SHADOW_FG COLOR_BLACK -#define SHADOW_BG COLOR_BLACK -#define SHADOW_HL TRUE - -#define DIALOG_FG COLOR_BLACK -#define DIALOG_BG COLOR_WHITE -#define DIALOG_HL FALSE - -#define TITLE_FG COLOR_YELLOW -#define TITLE_BG COLOR_WHITE -#define TITLE_HL TRUE - -#define BORDER_FG COLOR_WHITE -#define BORDER_BG COLOR_WHITE -#define BORDER_HL TRUE - -#define BUTTON_ACTIVE_FG COLOR_WHITE -#define BUTTON_ACTIVE_BG COLOR_BLUE -#define BUTTON_ACTIVE_HL TRUE - -#define BUTTON_INACTIVE_FG COLOR_BLACK -#define BUTTON_INACTIVE_BG COLOR_WHITE -#define BUTTON_INACTIVE_HL FALSE - -#define BUTTON_KEY_ACTIVE_FG COLOR_WHITE -#define BUTTON_KEY_ACTIVE_BG COLOR_BLUE -#define BUTTON_KEY_ACTIVE_HL TRUE - -#define BUTTON_KEY_INACTIVE_FG COLOR_RED -#define BUTTON_KEY_INACTIVE_BG COLOR_WHITE -#define BUTTON_KEY_INACTIVE_HL FALSE - -#define BUTTON_LABEL_ACTIVE_FG COLOR_YELLOW -#define BUTTON_LABEL_ACTIVE_BG COLOR_BLUE -#define BUTTON_LABEL_ACTIVE_HL TRUE - -#define BUTTON_LABEL_INACTIVE_FG COLOR_BLACK -#define BUTTON_LABEL_INACTIVE_BG COLOR_WHITE -#define BUTTON_LABEL_INACTIVE_HL TRUE - -#define INPUTBOX_FG COLOR_BLACK -#define INPUTBOX_BG COLOR_WHITE -#define INPUTBOX_HL FALSE - -#define INPUTBOX_BORDER_FG COLOR_BLACK -#define INPUTBOX_BORDER_BG COLOR_WHITE -#define INPUTBOX_BORDER_HL FALSE - -#define SEARCHBOX_FG COLOR_BLACK -#define SEARCHBOX_BG COLOR_WHITE -#define SEARCHBOX_HL FALSE - -#define SEARCHBOX_TITLE_FG COLOR_YELLOW -#define SEARCHBOX_TITLE_BG COLOR_WHITE -#define SEARCHBOX_TITLE_HL TRUE - -#define SEARCHBOX_BORDER_FG COLOR_WHITE -#define SEARCHBOX_BORDER_BG COLOR_WHITE -#define SEARCHBOX_BORDER_HL TRUE - -#define POSITION_INDICATOR_FG COLOR_YELLOW -#define POSITION_INDICATOR_BG COLOR_WHITE -#define POSITION_INDICATOR_HL TRUE - -#define MENUBOX_FG COLOR_BLACK -#define MENUBOX_BG COLOR_WHITE -#define MENUBOX_HL FALSE - -#define MENUBOX_BORDER_FG COLOR_WHITE -#define MENUBOX_BORDER_BG COLOR_WHITE -#define MENUBOX_BORDER_HL TRUE - -#define ITEM_FG COLOR_BLACK -#define ITEM_BG COLOR_WHITE -#define ITEM_HL FALSE - -#define ITEM_SELECTED_FG COLOR_WHITE -#define ITEM_SELECTED_BG COLOR_BLUE -#define ITEM_SELECTED_HL TRUE - -#define TAG_FG COLOR_YELLOW -#define TAG_BG COLOR_WHITE -#define TAG_HL TRUE - -#define TAG_SELECTED_FG COLOR_YELLOW -#define TAG_SELECTED_BG COLOR_BLUE -#define TAG_SELECTED_HL TRUE - -#define TAG_KEY_FG COLOR_YELLOW -#define TAG_KEY_BG COLOR_WHITE -#define TAG_KEY_HL TRUE - -#define TAG_KEY_SELECTED_FG COLOR_YELLOW -#define TAG_KEY_SELECTED_BG COLOR_BLUE -#define TAG_KEY_SELECTED_HL TRUE - -#define CHECK_FG COLOR_BLACK -#define CHECK_BG COLOR_WHITE -#define CHECK_HL FALSE - -#define CHECK_SELECTED_FG COLOR_WHITE -#define CHECK_SELECTED_BG COLOR_BLUE -#define CHECK_SELECTED_HL TRUE - -#define UARROW_FG COLOR_GREEN -#define UARROW_BG COLOR_WHITE -#define UARROW_HL TRUE - -#define DARROW_FG COLOR_GREEN -#define DARROW_BG COLOR_WHITE -#define DARROW_HL TRUE - -/* End of default color definitions */ - -#define C_ATTR(x,y) ((x ? A_BOLD : 0) | COLOR_PAIR((y))) -#define COLOR_NAME_LEN 10 -#define COLOR_COUNT 8 - -/* - * Global variables - */ - -extern int color_table[][3]; diff --git a/scripts/kconfig/lxdialog/dialog.h b/scripts/kconfig/lxdialog/dialog.h index af3cf716e21..8dea47f9d3e 100644 --- a/scripts/kconfig/lxdialog/dialog.h +++ b/scripts/kconfig/lxdialog/dialog.h @@ -48,7 +48,7 @@ #define TR(params) _tracef params -#define ESC 27 +#define KEY_ESC 27 #define TAB 9 #define MAX_LEN 2048 #define BUF_SIZE (10*1024) @@ -86,63 +86,111 @@ #define ACS_DARROW 'v' #endif +/* error return codes */ +#define ERRDISPLAYTOOSMALL (KEY_MAX + 1) + /* - * Attribute names + * Color definitions */ -#define screen_attr attributes[0] -#define shadow_attr attributes[1] -#define dialog_attr attributes[2] -#define title_attr attributes[3] -#define border_attr attributes[4] -#define button_active_attr attributes[5] -#define button_inactive_attr attributes[6] -#define button_key_active_attr attributes[7] -#define button_key_inactive_attr attributes[8] -#define button_label_active_attr attributes[9] -#define button_label_inactive_attr attributes[10] -#define inputbox_attr attributes[11] -#define inputbox_border_attr attributes[12] -#define searchbox_attr attributes[13] -#define searchbox_title_attr attributes[14] -#define searchbox_border_attr attributes[15] -#define position_indicator_attr attributes[16] -#define menubox_attr attributes[17] -#define menubox_border_attr attributes[18] -#define item_attr attributes[19] -#define item_selected_attr attributes[20] -#define tag_attr attributes[21] -#define tag_selected_attr attributes[22] -#define tag_key_attr attributes[23] -#define tag_key_selected_attr attributes[24] -#define check_attr attributes[25] -#define check_selected_attr attributes[26] -#define uarrow_attr attributes[27] -#define darrow_attr attributes[28] - -/* number of attributes */ -#define ATTRIBUTE_COUNT 29 +struct dialog_color { + chtype atr; /* Color attribute */ + int fg; /* foreground */ + int bg; /* background */ + int hl; /* highlight this item */ +}; + +struct dialog_info { + const char *backtitle; + struct dialog_color screen; + struct dialog_color shadow; + struct dialog_color dialog; + struct dialog_color title; + struct dialog_color border; + struct dialog_color button_active; + struct dialog_color button_inactive; + struct dialog_color button_key_active; + struct dialog_color button_key_inactive; + struct dialog_color button_label_active; + struct dialog_color button_label_inactive; + struct dialog_color inputbox; + struct dialog_color inputbox_border; + struct dialog_color searchbox; + struct dialog_color searchbox_title; + struct dialog_color searchbox_border; + struct dialog_color position_indicator; + struct dialog_color menubox; + struct dialog_color menubox_border; + struct dialog_color item; + struct dialog_color item_selected; + struct dialog_color tag; + struct dialog_color tag_selected; + struct dialog_color tag_key; + struct dialog_color tag_key_selected; + struct dialog_color check; + struct dialog_color check_selected; + struct dialog_color uarrow; + struct dialog_color darrow; +}; /* * Global variables */ -extern bool use_colors; -extern bool use_shadow; - -extern chtype attributes[]; - -extern const char *backtitle; +extern struct dialog_info dlg; +extern char dialog_input_result[]; /* * Function prototypes */ -extern void create_rc(const char *filename); -extern int parse_rc(void); -void init_dialog(void); +/* item list as used by checklist and menubox */ +void item_reset(void); +void item_make(const char *fmt, ...); +void item_add_str(const char *fmt, ...); +void item_set_tag(char tag); +void item_set_data(void *p); +void item_set_selected(int val); +int item_activate_selected(void); +void *item_data(void); +char item_tag(void); + +/* item list manipulation for lxdialog use */ +#define MAXITEMSTR 200 +struct dialog_item { + char str[MAXITEMSTR]; /* promtp displayed */ + char tag; + void *data; /* pointer to menu item - used by menubox+checklist */ + int selected; /* Set to 1 by dialog_*() function if selected. */ +}; + +/* list of lialog_items */ +struct dialog_list { + struct dialog_item node; + struct dialog_list *next; +}; + +extern struct dialog_list *item_cur; +extern struct dialog_list item_nil; +extern struct dialog_list *item_head; + +int item_count(void); +void item_set(int n); +int item_n(void); +const char *item_str(void); +int item_is_selected(void); +int item_is_tag(char tag); +#define item_foreach() \ + for (item_cur = item_head ? item_head: item_cur; \ + item_cur && (item_cur != &item_nil); item_cur = item_cur->next) + +/* generic key handlers */ +int on_key_esc(WINDOW *win); +int on_key_resize(void); + +void init_dialog(const char *backtitle); +void reset_dialog(void); void end_dialog(void); void attr_clear(WINDOW * win, int height, int width, chtype attr); void dialog_clear(void); -void color_setup(void); void print_autowrap(WINDOW * win, const char *prompt, int width, int y, int x); void print_button(WINDOW * win, const char *label, int y, int x, int selected); void print_title(WINDOW *dialog, const char *title, int width); @@ -155,12 +203,10 @@ int dialog_yesno(const char *title, const char *prompt, int height, int width); int dialog_msgbox(const char *title, const char *prompt, int height, int width, int pause); int dialog_textbox(const char *title, const char *file, int height, int width); -int dialog_menu(const char *title, const char *prompt, int height, int width, - int menu_height, const char *choice, int item_no, - const char *const *items); +int dialog_menu(const char *title, const char *prompt, + const void *selected, int *s_scroll); int dialog_checklist(const char *title, const char *prompt, int height, - int width, int list_height, int item_no, - const char *const *items); + int width, int list_height); extern char dialog_input_result[]; int dialog_inputbox(const char *title, const char *prompt, int height, int width, const char *init); diff --git a/scripts/kconfig/lxdialog/inputbox.c b/scripts/kconfig/lxdialog/inputbox.c index 779503726b0..05e72066b35 100644 --- a/scripts/kconfig/lxdialog/inputbox.c +++ b/scripts/kconfig/lxdialog/inputbox.c @@ -49,6 +49,17 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width char *instr = dialog_input_result; WINDOW *dialog; + if (!init) + instr[0] = '\0'; + else + strcpy(instr, init); + +do_resize: + if (getmaxy(stdscr) <= (height - 2)) + return -ERRDISPLAYTOOSMALL; + if (getmaxx(stdscr) <= (width - 2)) + return -ERRDISPLAYTOOSMALL; + /* center dialog box on screen */ x = (COLS - width) / 2; y = (LINES - height) / 2; @@ -58,17 +69,18 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width dialog = newwin(height, width, y, x); keypad(dialog, TRUE); - draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr); - wattrset(dialog, border_attr); + draw_box(dialog, 0, 0, height, width, + dlg.dialog.atr, dlg.border.atr); + wattrset(dialog, dlg.border.atr); mvwaddch(dialog, height - 3, 0, ACS_LTEE); for (i = 0; i < width - 2; i++) waddch(dialog, ACS_HLINE); - wattrset(dialog, dialog_attr); + wattrset(dialog, dlg.dialog.atr); waddch(dialog, ACS_RTEE); print_title(dialog, title, width); - wattrset(dialog, dialog_attr); + wattrset(dialog, dlg.dialog.atr); print_autowrap(dialog, prompt, width - 2, 1, 3); /* Draw the input field box */ @@ -76,18 +88,14 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width getyx(dialog, y, x); box_y = y + 2; box_x = (width - box_width) / 2; - draw_box(dialog, y + 1, box_x - 1, 3, box_width + 2, border_attr, dialog_attr); + draw_box(dialog, y + 1, box_x - 1, 3, box_width + 2, + dlg.border.atr, dlg.dialog.atr); print_buttons(dialog, height, width, 0); /* Set up the initial value */ wmove(dialog, box_y, box_x); - wattrset(dialog, inputbox_attr); - - if (!init) - instr[0] = '\0'; - else - strcpy(instr, init); + wattrset(dialog, dlg.inputbox.atr); input_x = strlen(instr); @@ -104,7 +112,7 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width wrefresh(dialog); - while (key != ESC) { + while (key != KEY_ESC) { key = wgetch(dialog); if (button == -1) { /* Input box selected */ @@ -120,7 +128,7 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width case KEY_BACKSPACE: case 127: if (input_x || scroll) { - wattrset(dialog, inputbox_attr); + wattrset(dialog, dlg.inputbox.atr); if (!input_x) { scroll = scroll < box_width - 1 ? 0 : scroll - (box_width - 1); wmove(dialog, box_y, box_x); @@ -140,7 +148,7 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width default: if (key < 0x100 && isprint(key)) { if (scroll + input_x < MAX_LEN) { - wattrset(dialog, inputbox_attr); + wattrset(dialog, dlg.inputbox.atr); instr[scroll + input_x] = key; instr[scroll + input_x + 1] = '\0'; if (input_x == box_width - 1) { @@ -213,12 +221,18 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width return (button == -1 ? 0 : button); case 'X': case 'x': - key = ESC; - case ESC: + key = KEY_ESC; + break; + case KEY_ESC: + key = on_key_esc(dialog); break; + case KEY_RESIZE: + delwin(dialog); + on_key_resize(); + goto do_resize; } } delwin(dialog); - return -1; /* ESC pressed */ + return KEY_ESC; /* ESC pressed */ } diff --git a/scripts/kconfig/lxdialog/lxdialog.c b/scripts/kconfig/lxdialog/lxdialog.c deleted file mode 100644 index 79f6c5fb5ce..00000000000 --- a/scripts/kconfig/lxdialog/lxdialog.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * dialog - Display simple dialog boxes from shell scripts - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "dialog.h" - -static void Usage(const char *name); - -typedef int (jumperFn) (const char *title, int argc, const char *const *argv); - -struct Mode { - char *name; - int argmin, argmax, argmod; - jumperFn *jumper; -}; - -jumperFn j_menu, j_radiolist, j_yesno, j_textbox, j_inputbox; -jumperFn j_msgbox, j_infobox; - -static struct Mode modes[] = { - {"--menu", 9, 0, 3, j_menu}, - {"--radiolist", 9, 0, 3, j_radiolist}, - {"--yesno", 5, 5, 1, j_yesno}, - {"--textbox", 5, 5, 1, j_textbox}, - {"--inputbox", 5, 6, 1, j_inputbox}, - {"--msgbox", 5, 5, 1, j_msgbox}, - {"--infobox", 5, 5, 1, j_infobox}, - {NULL, 0, 0, 0, NULL} -}; - -static struct Mode *modePtr; - -#ifdef LOCALE -#include <locale.h> -#endif - -int main(int argc, const char *const *argv) -{ - int offset = 0, opt_clear = 0, end_common_opts = 0, retval; - const char *title = NULL; - -#ifdef LOCALE - (void)setlocale(LC_ALL, ""); -#endif - -#ifdef TRACE - trace(TRACE_CALLS | TRACE_UPDATE); -#endif - if (argc < 2) { - Usage(argv[0]); - exit(-1); - } - - while (offset < argc - 1 && !end_common_opts) { /* Common options */ - if (!strcmp(argv[offset + 1], "--title")) { - if (argc - offset < 3 || title != NULL) { - Usage(argv[0]); - exit(-1); - } else { - title = argv[offset + 2]; - offset += 2; - } - } else if (!strcmp(argv[offset + 1], "--backtitle")) { - if (backtitle != NULL) { - Usage(argv[0]); - exit(-1); - } else { - backtitle = argv[offset + 2]; - offset += 2; - } - } else if (!strcmp(argv[offset + 1], "--clear")) { - if (opt_clear) { /* Hey, "--clear" can't appear twice! */ - Usage(argv[0]); - exit(-1); - } else if (argc == 2) { /* we only want to clear the screen */ - init_dialog(); - refresh(); /* init_dialog() will clear the screen for us */ - end_dialog(); - return 0; - } else { - opt_clear = 1; - offset++; - } - } else /* no more common options */ - end_common_opts = 1; - } - - if (argc - 1 == offset) { /* no more options */ - Usage(argv[0]); - exit(-1); - } - /* use a table to look for the requested mode, to avoid code duplication */ - - for (modePtr = modes; modePtr->name; modePtr++) /* look for the mode */ - if (!strcmp(argv[offset + 1], modePtr->name)) - break; - - if (!modePtr->name) - Usage(argv[0]); - if (argc - offset < modePtr->argmin) - Usage(argv[0]); - if (modePtr->argmax && argc - offset > modePtr->argmax) - Usage(argv[0]); - - init_dialog(); - retval = (*(modePtr->jumper)) (title, argc - offset, argv + offset); - - if (opt_clear) { /* clear screen before exit */ - attr_clear(stdscr, LINES, COLS, screen_attr); - refresh(); - } - end_dialog(); - - exit(retval); -} - -/* - * Print program usage - */ -static void Usage(const char *name) -{ - fprintf(stderr, "\ -\ndialog, by Savio Lam (lam836@cs.cuhk.hk).\ -\n patched by Stuart Herbert (S.Herbert@shef.ac.uk)\ -\n modified/gutted for use as a Linux kernel config tool by \ -\n William Roadcap (roadcapw@cfw.com)\ -\n\ -\n* Display dialog boxes from shell scripts *\ -\n\ -\nUsage: %s --clear\ -\n %s [--title <title>] [--backtitle <backtitle>] --clear <Box options>\ -\n\ -\nBox options:\ -\n\ -\n --menu <text> <height> <width> <menu height> <tag1> <item1>...\ -\n --radiolist <text> <height> <width> <list height> <tag1> <item1> <status1>...\ -\n --textbox <file> <height> <width>\ -\n --inputbox <text> <height> <width> [<init>]\ -\n --yesno <text> <height> <width>\ -\n", name, name); - exit(-1); -} - -/* - * These are the program jumpers - */ - -int j_menu(const char *t, int ac, const char *const *av) -{ - return dialog_menu(t, av[2], atoi(av[3]), atoi(av[4]), - atoi(av[5]), av[6], (ac - 6) / 2, av + 7); -} - -int j_radiolist(const char *t, int ac, const char *const *av) -{ - return dialog_checklist(t, av[2], atoi(av[3]), atoi(av[4]), - atoi(av[5]), (ac - 6) / 3, av + 6); -} - -int j_textbox(const char *t, int ac, const char *const *av) -{ - return dialog_textbox(t, av[2], atoi(av[3]), atoi(av[4])); -} - -int j_yesno(const char *t, int ac, const char *const *av) -{ - return dialog_yesno(t, av[2], atoi(av[3]), atoi(av[4])); -} - -int j_inputbox(const char *t, int ac, const char *const *av) -{ - int ret = dialog_inputbox(t, av[2], atoi(av[3]), atoi(av[4]), - ac == 6 ? av[5] : (char *)NULL); - if (ret == 0) - fprintf(stderr, dialog_input_result); - return ret; -} - -int j_msgbox(const char *t, int ac, const char *const *av) -{ - return dialog_msgbox(t, av[2], atoi(av[3]), atoi(av[4]), 1); -} - -int j_infobox(const char *t, int ac, const char *const *av) -{ - return dialog_msgbox(t, av[2], atoi(av[3]), atoi(av[4]), 0); -} diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c index bf8052f4fd4..0d83159d901 100644 --- a/scripts/kconfig/lxdialog/menubox.c +++ b/scripts/kconfig/lxdialog/menubox.c @@ -63,19 +63,19 @@ static int menu_width, item_x; /* * Print menu item */ -static void do_print_item(WINDOW * win, const char *item, int choice, +static void do_print_item(WINDOW * win, const char *item, int line_y, int selected, int hotkey) { int j; char *menu_item = malloc(menu_width + 1); strncpy(menu_item, item, menu_width - item_x); - menu_item[menu_width] = 0; + menu_item[menu_width - item_x] = '\0'; j = first_alpha(menu_item, "YyNnMmHh"); /* Clear 'residue' of last item */ - wattrset(win, menubox_attr); - wmove(win, choice, 0); + wattrset(win, dlg.menubox.atr); + wmove(win, line_y, 0); #if OLD_NCURSES { int i; @@ -85,23 +85,24 @@ static void do_print_item(WINDOW * win, const char *item, int choice, #else wclrtoeol(win); #endif - wattrset(win, selected ? item_selected_attr : item_attr); - mvwaddstr(win, choice, item_x, menu_item); + wattrset(win, selected ? dlg.item_selected.atr : dlg.item.atr); + mvwaddstr(win, line_y, item_x, menu_item); if (hotkey) { - wattrset(win, selected ? tag_key_selected_attr : tag_key_attr); - mvwaddch(win, choice, item_x + j, menu_item[j]); + wattrset(win, selected ? dlg.tag_key_selected.atr + : dlg.tag_key.atr); + mvwaddch(win, line_y, item_x + j, menu_item[j]); } if (selected) { - wmove(win, choice, item_x + 1); + wmove(win, line_y, item_x + 1); } free(menu_item); wrefresh(win); } -#define print_item(index, choice, selected) \ -do {\ - int hotkey = (items[(index) * 2][0] != ':'); \ - do_print_item(menu, items[(index) * 2 + 1], choice, selected, hotkey); \ +#define print_item(index, choice, selected) \ +do { \ + item_set(index); \ + do_print_item(menu, item_str(), choice, selected, !item_is_tag(':')); \ } while (0) /* @@ -117,11 +118,11 @@ static void print_arrows(WINDOW * win, int item_no, int scroll, int y, int x, wmove(win, y, x); if (scroll > 0) { - wattrset(win, uarrow_attr); + wattrset(win, dlg.uarrow.atr); waddch(win, ACS_UARROW); waddstr(win, "(-)"); } else { - wattrset(win, menubox_attr); + wattrset(win, dlg.menubox.atr); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); @@ -133,11 +134,11 @@ static void print_arrows(WINDOW * win, int item_no, int scroll, int y, int x, wrefresh(win); if ((height < item_no) && (scroll + height < item_no)) { - wattrset(win, darrow_attr); + wattrset(win, dlg.darrow.atr); waddch(win, ACS_DARROW); waddstr(win, "(+)"); } else { - wattrset(win, menubox_border_attr); + wattrset(win, dlg.menubox_border.atr); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); waddch(win, ACS_HLINE); @@ -178,17 +179,26 @@ static void do_scroll(WINDOW *win, int *scroll, int n) /* * Display a menu for choosing among a number of options */ -int dialog_menu(const char *title, const char *prompt, int height, int width, - int menu_height, const char *current, int item_no, - const char *const *items) +int dialog_menu(const char *title, const char *prompt, + const void *selected, int *s_scroll) { int i, j, x, y, box_x, box_y; + int height, width, menu_height; int key = 0, button = 0, scroll = 0, choice = 0; int first_item = 0, max_choice; WINDOW *dialog, *menu; - FILE *f; - max_choice = MIN(menu_height, item_no); +do_resize: + height = getmaxy(stdscr); + width = getmaxx(stdscr); + if (height < 15 || width < 65) + return -ERRDISPLAYTOOSMALL; + + height -= 4; + width -= 5; + menu_height = height - 10; + + max_choice = MIN(menu_height, item_count()); /* center dialog box on screen */ x = (COLS - width) / 2; @@ -199,18 +209,19 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, dialog = newwin(height, width, y, x); keypad(dialog, TRUE); - draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr); - wattrset(dialog, border_attr); + draw_box(dialog, 0, 0, height, width, + dlg.dialog.atr, dlg.border.atr); + wattrset(dialog, dlg.border.atr); mvwaddch(dialog, height - 3, 0, ACS_LTEE); for (i = 0; i < width - 2; i++) waddch(dialog, ACS_HLINE); - wattrset(dialog, dialog_attr); - wbkgdset(dialog, dialog_attr & A_COLOR); + wattrset(dialog, dlg.dialog.atr); + wbkgdset(dialog, dlg.dialog.atr & A_COLOR); waddch(dialog, ACS_RTEE); print_title(dialog, title, width); - wattrset(dialog, dialog_attr); + wattrset(dialog, dlg.dialog.atr); print_autowrap(dialog, prompt, width - 2, 1, 3); menu_width = width - 6; @@ -224,33 +235,29 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, /* draw a box around the menu items */ draw_box(dialog, box_y, box_x, menu_height + 2, menu_width + 2, - menubox_border_attr, menubox_attr); + dlg.menubox_border.atr, dlg.menubox.atr); - item_x = (menu_width - 70) / 2; + if (menu_width >= 80) + item_x = (menu_width - 70) / 2; + else + item_x = 4; /* Set choice to default item */ - for (i = 0; i < item_no; i++) - if (strcmp(current, items[i * 2]) == 0) - choice = i; - - /* get the scroll info from the temp file */ - if ((f = fopen("lxdialog.scrltmp", "r")) != NULL) { - if ((fscanf(f, "%d\n", &scroll) == 1) && (scroll <= choice) && - (scroll + max_choice > choice) && (scroll >= 0) && - (scroll + max_choice <= item_no)) { - first_item = scroll; - choice = choice - scroll; - fclose(f); - } else { - scroll = 0; - remove("lxdialog.scrltmp"); - fclose(f); - f = NULL; - } + item_foreach() + if (selected && (selected == item_data())) + choice = item_n(); + /* get the saved scroll info */ + scroll = *s_scroll; + if ((scroll <= choice) && (scroll + max_choice > choice) && + (scroll >= 0) && (scroll + max_choice <= item_count())) { + first_item = scroll; + choice = choice - scroll; + } else { + scroll = 0; } - if ((choice >= max_choice) || (f == NULL && choice >= max_choice / 2)) { - if (choice >= item_no - max_choice / 2) - scroll = first_item = item_no - max_choice; + if ((choice >= max_choice)) { + if (choice >= item_count() - max_choice / 2) + scroll = first_item = item_count() - max_choice; else scroll = first_item = choice - max_choice / 2; choice = choice - scroll; @@ -263,14 +270,14 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, wnoutrefresh(menu); - print_arrows(dialog, item_no, scroll, + print_arrows(dialog, item_count(), scroll, box_y, box_x + item_x + 1, menu_height); print_buttons(dialog, height, width, 0); wmove(menu, choice, item_x + 1); wrefresh(menu); - while (key != ESC) { + while (key != KEY_ESC) { key = wgetch(menu); if (key < 256 && isalpha(key)) @@ -280,14 +287,16 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, i = max_choice; else { for (i = choice + 1; i < max_choice; i++) { - j = first_alpha(items[(scroll + i) * 2 + 1], "YyNnMmHh"); - if (key == tolower(items[(scroll + i) * 2 + 1][j])) + item_set(scroll + i); + j = first_alpha(item_str(), "YyNnMmHh"); + if (key == tolower(item_str()[j])) break; } if (i == max_choice) for (i = 0; i < max_choice; i++) { - j = first_alpha(items [(scroll + i) * 2 + 1], "YyNnMmHh"); - if (key == tolower(items[(scroll + i) * 2 + 1][j])) + item_set(scroll + i); + j = first_alpha(item_str(), "YyNnMmHh"); + if (key == tolower(item_str()[j])) break; } } @@ -312,7 +321,7 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, print_item(scroll+choice, choice, FALSE); if ((choice > max_choice - 3) && - (scroll + max_choice < item_no)) { + (scroll + max_choice < item_count())) { /* Scroll menu up */ do_scroll(menu, &scroll, 1); @@ -335,7 +344,7 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, } else if (key == KEY_NPAGE) { for (i = 0; (i < max_choice); i++) { - if (scroll + max_choice < item_no) { + if (scroll + max_choice < item_count()) { do_scroll(menu, &scroll, 1); print_item(scroll+max_choice-1, max_choice - 1, FALSE); @@ -349,7 +358,7 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, print_item(scroll + choice, choice, TRUE); - print_arrows(dialog, item_no, scroll, + print_arrows(dialog, item_count(), scroll, box_y, box_x + item_x + 1, menu_height); wnoutrefresh(dialog); @@ -375,12 +384,11 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, case 'm': case '/': /* save scroll info */ - if ((f = fopen("lxdialog.scrltmp", "w")) != NULL) { - fprintf(f, "%d\n", scroll); - fclose(f); - } + *s_scroll = scroll; + delwin(menu); delwin(dialog); - fprintf(stderr, "%s\n", items[(scroll + choice) * 2]); + item_set(scroll + choice); + item_set_selected(1); switch (key) { case 's': return 3; @@ -400,27 +408,27 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, case '?': button = 2; case '\n': + *s_scroll = scroll; + delwin(menu); delwin(dialog); - if (button == 2) - fprintf(stderr, "%s \"%s\"\n", - items[(scroll + choice) * 2], - items[(scroll + choice) * 2 + 1] + - first_alpha(items [(scroll + choice) * 2 + 1], "")); - else - fprintf(stderr, "%s\n", - items[(scroll + choice) * 2]); - - remove("lxdialog.scrltmp"); + item_set(scroll + choice); + item_set_selected(1); return button; case 'e': case 'x': - key = ESC; - case ESC: + key = KEY_ESC; + break; + case KEY_ESC: + key = on_key_esc(menu); break; + case KEY_RESIZE: + on_key_resize(); + delwin(menu); + delwin(dialog); + goto do_resize; } } - + delwin(menu); delwin(dialog); - remove("lxdialog.scrltmp"); - return -1; /* ESC pressed */ + return key; /* ESC pressed */ } diff --git a/scripts/kconfig/lxdialog/msgbox.c b/scripts/kconfig/lxdialog/msgbox.c deleted file mode 100644 index 7323f5471f6..00000000000 --- a/scripts/kconfig/lxdialog/msgbox.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * msgbox.c -- implements the message box and info box - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcapw@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "dialog.h" - -/* - * Display a message box. Program will pause and display an "OK" button - * if the parameter 'pause' is non-zero. - */ -int dialog_msgbox(const char *title, const char *prompt, int height, int width, - int pause) -{ - int i, x, y, key = 0; - WINDOW *dialog; - - /* center dialog box on screen */ - x = (COLS - width) / 2; - y = (LINES - height) / 2; - - draw_shadow(stdscr, y, x, height, width); - - dialog = newwin(height, width, y, x); - keypad(dialog, TRUE); - - draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr); - - print_title(dialog, title, width); - - wattrset(dialog, dialog_attr); - print_autowrap(dialog, prompt, width - 2, 1, 2); - - if (pause) { - wattrset(dialog, border_attr); - mvwaddch(dialog, height - 3, 0, ACS_LTEE); - for (i = 0; i < width - 2; i++) - waddch(dialog, ACS_HLINE); - wattrset(dialog, dialog_attr); - waddch(dialog, ACS_RTEE); - - print_button(dialog, " Ok ", height - 2, width / 2 - 4, TRUE); - - wrefresh(dialog); - while (key != ESC && key != '\n' && key != ' ' && - key != 'O' && key != 'o' && key != 'X' && key != 'x') - key = wgetch(dialog); - } else { - key = '\n'; - wrefresh(dialog); - } - - delwin(dialog); - return key == ESC ? -1 : 0; -} diff --git a/scripts/kconfig/lxdialog/textbox.c b/scripts/kconfig/lxdialog/textbox.c index 77848bb8e07..fabfc1ad789 100644 --- a/scripts/kconfig/lxdialog/textbox.c +++ b/scripts/kconfig/lxdialog/textbox.c @@ -25,56 +25,62 @@ static void back_lines(int n); static void print_page(WINDOW * win, int height, int width); static void print_line(WINDOW * win, int row, int width); static char *get_line(void); -static void print_position(WINDOW * win, int height, int width); +static void print_position(WINDOW * win); + +static int hscroll; +static int begin_reached, end_reached, page_length; +static const char *buf; +static const char *page; + +/* + * refresh window content + */ +static void refresh_text_box(WINDOW *dialog, WINDOW *box, int boxh, int boxw, + int cur_y, int cur_x) +{ + print_page(box, boxh, boxw); + print_position(dialog); + wmove(dialog, cur_y, cur_x); /* Restore cursor position */ + wrefresh(dialog); +} -static int hscroll, fd, file_size, bytes_read; -static int begin_reached = 1, end_reached, page_length; -static char *buf, *page; /* * Display text from a file in a dialog box. */ -int dialog_textbox(const char *title, const char *file, int height, int width) +int dialog_textbox(const char *title, const char *tbuf, + int initial_height, int initial_width) { - int i, x, y, cur_x, cur_y, fpos, key = 0; + int i, x, y, cur_x, cur_y, key = 0; + int height, width, boxh, boxw; int passed_end; - char search_term[MAX_LEN + 1]; - WINDOW *dialog, *text; - - search_term[0] = '\0'; /* no search term entered yet */ + WINDOW *dialog, *box; - /* Open input file for reading */ - if ((fd = open(file, O_RDONLY)) == -1) { - endwin(); - fprintf(stderr, "\nCan't open input file in dialog_textbox().\n"); - exit(-1); - } - /* Get file size. Actually, 'file_size' is the real file size - 1, - since it's only the last byte offset from the beginning */ - if ((file_size = lseek(fd, 0, SEEK_END)) == -1) { - endwin(); - fprintf(stderr, "\nError getting file size in dialog_textbox().\n"); - exit(-1); - } - /* Restore file pointer to beginning of file after getting file size */ - if (lseek(fd, 0, SEEK_SET) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in dialog_textbox().\n"); - exit(-1); - } - /* Allocate space for read buffer */ - if ((buf = malloc(BUF_SIZE + 1)) == NULL) { - endwin(); - fprintf(stderr, "\nCan't allocate memory in dialog_textbox().\n"); - exit(-1); - } - if ((bytes_read = read(fd, buf, BUF_SIZE)) == -1) { - endwin(); - fprintf(stderr, "\nError reading file in dialog_textbox().\n"); - exit(-1); - } - buf[bytes_read] = '\0'; /* mark end of valid data */ - page = buf; /* page is pointer to start of page to be displayed */ + begin_reached = 1; + end_reached = 0; + page_length = 0; + hscroll = 0; + buf = tbuf; + page = buf; /* page is pointer to start of page to be displayed */ + +do_resize: + getmaxyx(stdscr, height, width); + if (height < 8 || width < 8) + return -ERRDISPLAYTOOSMALL; + if (initial_height != 0) + height = initial_height; + else + if (height > 4) + height -= 4; + else + height = 0; + if (initial_width != 0) + width = initial_width; + else + if (width > 5) + width -= 5; + else + width = 0; /* center dialog box on screen */ x = (COLS - width) / 2; @@ -85,22 +91,25 @@ int dialog_textbox(const char *title, const char *file, int height, int width) dialog = newwin(height, width, y, x); keypad(dialog, TRUE); - /* Create window for text region, used for scrolling text */ - text = subwin(dialog, height - 4, width - 2, y + 1, x + 1); - wattrset(text, dialog_attr); - wbkgdset(text, dialog_attr & A_COLOR); + /* Create window for box region, used for scrolling text */ + boxh = height - 4; + boxw = width - 2; + box = subwin(dialog, boxh, boxw, y + 1, x + 1); + wattrset(box, dlg.dialog.atr); + wbkgdset(box, dlg.dialog.atr & A_COLOR); - keypad(text, TRUE); + keypad(box, TRUE); /* register the new window, along with its borders */ - draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr); + draw_box(dialog, 0, 0, height, width, + dlg.dialog.atr, dlg.border.atr); - wattrset(dialog, border_attr); + wattrset(dialog, dlg.border.atr); mvwaddch(dialog, height - 3, 0, ACS_LTEE); for (i = 0; i < width - 2; i++) waddch(dialog, ACS_HLINE); - wattrset(dialog, dialog_attr); - wbkgdset(dialog, dialog_attr & A_COLOR); + wattrset(dialog, dlg.dialog.atr); + wbkgdset(dialog, dlg.dialog.atr & A_COLOR); waddch(dialog, ACS_RTEE); print_title(dialog, title, width); @@ -110,85 +119,37 @@ int dialog_textbox(const char *title, const char *file, int height, int width) getyx(dialog, cur_y, cur_x); /* Save cursor position */ /* Print first page of text */ - attr_clear(text, height - 4, width - 2, dialog_attr); - print_page(text, height - 4, width - 2); - print_position(dialog, height, width); - wmove(dialog, cur_y, cur_x); /* Restore cursor position */ - wrefresh(dialog); + attr_clear(box, boxh, boxw, dlg.dialog.atr); + refresh_text_box(dialog, box, boxh, boxw, cur_y, cur_x); - while ((key != ESC) && (key != '\n')) { + while ((key != KEY_ESC) && (key != '\n')) { key = wgetch(dialog); switch (key) { case 'E': /* Exit */ case 'e': case 'X': case 'x': + delwin(box); delwin(dialog); - free(buf); - close(fd); return 0; case 'g': /* First page */ case KEY_HOME: if (!begin_reached) { begin_reached = 1; - /* First page not in buffer? */ - if ((fpos = lseek(fd, 0, SEEK_CUR)) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in dialog_textbox().\n"); - exit(-1); - } - if (fpos > bytes_read) { /* Yes, we have to read it in */ - if (lseek(fd, 0, SEEK_SET) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in " - "dialog_textbox().\n"); - exit(-1); - } - if ((bytes_read = - read(fd, buf, BUF_SIZE)) == -1) { - endwin(); - fprintf(stderr, "\nError reading file in dialog_textbox().\n"); - exit(-1); - } - buf[bytes_read] = '\0'; - } page = buf; - print_page(text, height - 4, width - 2); - print_position(dialog, height, width); - wmove(dialog, cur_y, cur_x); /* Restore cursor position */ - wrefresh(dialog); + refresh_text_box(dialog, box, boxh, boxw, + cur_y, cur_x); } break; case 'G': /* Last page */ case KEY_END: end_reached = 1; - /* Last page not in buffer? */ - if ((fpos = lseek(fd, 0, SEEK_CUR)) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in dialog_textbox().\n"); - exit(-1); - } - if (fpos < file_size) { /* Yes, we have to read it in */ - if (lseek(fd, -BUF_SIZE, SEEK_END) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in dialog_textbox().\n"); - exit(-1); - } - if ((bytes_read = - read(fd, buf, BUF_SIZE)) == -1) { - endwin(); - fprintf(stderr, "\nError reading file in dialog_textbox().\n"); - exit(-1); - } - buf[bytes_read] = '\0'; - } - page = buf + bytes_read; - back_lines(height - 4); - print_page(text, height - 4, width - 2); - print_position(dialog, height, width); - wmove(dialog, cur_y, cur_x); /* Restore cursor position */ - wrefresh(dialog); + /* point to last char in buf */ + page = buf + strlen(buf); + back_lines(boxh); + refresh_text_box(dialog, box, boxh, boxw, + cur_y, cur_x); break; case 'K': /* Previous line */ case 'k': @@ -196,21 +157,23 @@ int dialog_textbox(const char *title, const char *file, int height, int width) if (!begin_reached) { back_lines(page_length + 1); - /* We don't call print_page() here but use scrolling to ensure - faster screen update. However, 'end_reached' and - 'page_length' should still be updated, and 'page' should - point to start of next page. This is done by calling - get_line() in the following 'for' loop. */ - scrollok(text, TRUE); - wscrl(text, -1); /* Scroll text region down one line */ - scrollok(text, FALSE); + /* We don't call print_page() here but use + * scrolling to ensure faster screen update. + * However, 'end_reached' and 'page_length' + * should still be updated, and 'page' should + * point to start of next page. This is done + * by calling get_line() in the following + * 'for' loop. */ + scrollok(box, TRUE); + wscrl(box, -1); /* Scroll box region down one line */ + scrollok(box, FALSE); page_length = 0; passed_end = 0; - for (i = 0; i < height - 4; i++) { + for (i = 0; i < boxh; i++) { if (!i) { /* print first line of page */ - print_line(text, 0, width - 2); - wnoutrefresh(text); + print_line(box, 0, boxw); + wnoutrefresh(box); } else /* Called to update 'end_reached' and 'page' */ get_line(); @@ -220,7 +183,7 @@ int dialog_textbox(const char *title, const char *file, int height, int width) passed_end = 1; } - print_position(dialog, height, width); + print_position(dialog); wmove(dialog, cur_y, cur_x); /* Restore cursor position */ wrefresh(dialog); } @@ -230,23 +193,21 @@ int dialog_textbox(const char *title, const char *file, int height, int width) case KEY_PPAGE: if (begin_reached) break; - back_lines(page_length + height - 4); - print_page(text, height - 4, width - 2); - print_position(dialog, height, width); - wmove(dialog, cur_y, cur_x); - wrefresh(dialog); + back_lines(page_length + boxh); + refresh_text_box(dialog, box, boxh, boxw, + cur_y, cur_x); break; case 'J': /* Next line */ case 'j': case KEY_DOWN: if (!end_reached) { begin_reached = 0; - scrollok(text, TRUE); - scroll(text); /* Scroll text region up one line */ - scrollok(text, FALSE); - print_line(text, height - 5, width - 2); - wnoutrefresh(text); - print_position(dialog, height, width); + scrollok(box, TRUE); + scroll(box); /* Scroll box region up one line */ + scrollok(box, FALSE); + print_line(box, boxh - 1, boxw); + wnoutrefresh(box); + print_position(dialog); wmove(dialog, cur_y, cur_x); /* Restore cursor position */ wrefresh(dialog); } @@ -257,10 +218,8 @@ int dialog_textbox(const char *title, const char *file, int height, int width) break; begin_reached = 0; - print_page(text, height - 4, width - 2); - print_position(dialog, height, width); - wmove(dialog, cur_y, cur_x); - wrefresh(dialog); + refresh_text_box(dialog, box, boxh, boxw, + cur_y, cur_x); break; case '0': /* Beginning of line */ case 'H': /* Scroll left */ @@ -275,9 +234,8 @@ int dialog_textbox(const char *title, const char *file, int height, int width) hscroll--; /* Reprint current page to scroll horizontally */ back_lines(page_length); - print_page(text, height - 4, width - 2); - wmove(dialog, cur_y, cur_x); - wrefresh(dialog); + refresh_text_box(dialog, box, boxh, boxw, + cur_y, cur_x); break; case 'L': /* Scroll right */ case 'l': @@ -287,131 +245,56 @@ int dialog_textbox(const char *title, const char *file, int height, int width) hscroll++; /* Reprint current page to scroll horizontally */ back_lines(page_length); - print_page(text, height - 4, width - 2); - wmove(dialog, cur_y, cur_x); - wrefresh(dialog); + refresh_text_box(dialog, box, boxh, boxw, + cur_y, cur_x); break; - case ESC: + case KEY_ESC: + key = on_key_esc(dialog); break; + case KEY_RESIZE: + back_lines(height); + delwin(box); + delwin(dialog); + on_key_resize(); + goto do_resize; } } - + delwin(box); delwin(dialog); - free(buf); - close(fd); - return -1; /* ESC pressed */ + return key; /* ESC pressed */ } /* - * Go back 'n' lines in text file. Called by dialog_textbox(). + * Go back 'n' lines in text. Called by dialog_textbox(). * 'page' will be updated to point to the desired line in 'buf'. */ static void back_lines(int n) { - int i, fpos; + int i; begin_reached = 0; - /* We have to distinguish between end_reached and !end_reached - since at end of file, the line is not ended by a '\n'. - The code inside 'if' basically does a '--page' to move one - character backward so as to skip '\n' of the previous line */ - if (!end_reached) { - /* Either beginning of buffer or beginning of file reached? */ - if (page == buf) { - if ((fpos = lseek(fd, 0, SEEK_CUR)) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in " - "back_lines().\n"); - exit(-1); - } - if (fpos > bytes_read) { /* Not beginning of file yet */ - /* We've reached beginning of buffer, but not beginning of - file yet, so read previous part of file into buffer. - Note that we only move backward for BUF_SIZE/2 bytes, - but not BUF_SIZE bytes to avoid re-reading again in - print_page() later */ - /* Really possible to move backward BUF_SIZE/2 bytes? */ - if (fpos < BUF_SIZE / 2 + bytes_read) { - /* No, move less then */ - if (lseek(fd, 0, SEEK_SET) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in " - "back_lines().\n"); - exit(-1); - } - page = buf + fpos - bytes_read; - } else { /* Move backward BUF_SIZE/2 bytes */ - if (lseek (fd, -(BUF_SIZE / 2 + bytes_read), SEEK_CUR) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer " - "in back_lines().\n"); - exit(-1); - } - page = buf + BUF_SIZE / 2; - } - if ((bytes_read = - read(fd, buf, BUF_SIZE)) == -1) { - endwin(); - fprintf(stderr, "\nError reading file in back_lines().\n"); - exit(-1); - } - buf[bytes_read] = '\0'; - } else { /* Beginning of file reached */ - begin_reached = 1; - return; + /* Go back 'n' lines */ + for (i = 0; i < n; i++) { + if (*page == '\0') { + if (end_reached) { + end_reached = 0; + continue; } } - if (*(--page) != '\n') { /* '--page' here */ - /* Something's wrong... */ - endwin(); - fprintf(stderr, "\nInternal error in back_lines().\n"); - exit(-1); + if (page == buf) { + begin_reached = 1; + return; } - } - /* Go back 'n' lines */ - for (i = 0; i < n; i++) + page--; do { if (page == buf) { - if ((fpos = lseek(fd, 0, SEEK_CUR)) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in back_lines().\n"); - exit(-1); - } - if (fpos > bytes_read) { - /* Really possible to move backward BUF_SIZE/2 bytes? */ - if (fpos < BUF_SIZE / 2 + bytes_read) { - /* No, move less then */ - if (lseek(fd, 0, SEEK_SET) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer " - "in back_lines().\n"); - exit(-1); - } - page = buf + fpos - bytes_read; - } else { /* Move backward BUF_SIZE/2 bytes */ - if (lseek (fd, -(BUF_SIZE / 2 + bytes_read), SEEK_CUR) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer" - " in back_lines().\n"); - exit(-1); - } - page = buf + BUF_SIZE / 2; - } - if ((bytes_read = - read(fd, buf, BUF_SIZE)) == -1) { - endwin(); - fprintf(stderr, "\nError reading file in " - "back_lines().\n"); - exit(-1); - } - buf[bytes_read] = '\0'; - } else { /* Beginning of file reached */ - begin_reached = 1; - return; - } + begin_reached = 1; + return; } - } while (*(--page) != '\n'); - page++; + page--; + } while (*page != '\n'); + page++; + } } /* @@ -466,33 +349,14 @@ static void print_line(WINDOW * win, int row, int width) */ static char *get_line(void) { - int i = 0, fpos; + int i = 0; static char line[MAX_LEN + 1]; end_reached = 0; while (*page != '\n') { if (*page == '\0') { - /* Either end of file or end of buffer reached */ - if ((fpos = lseek(fd, 0, SEEK_CUR)) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in " - "get_line().\n"); - exit(-1); - } - if (fpos < file_size) { /* Not end of file yet */ - /* We've reached end of buffer, but not end of file yet, - so read next part of file into buffer */ - if ((bytes_read = - read(fd, buf, BUF_SIZE)) == -1) { - endwin(); - fprintf(stderr, "\nError reading file in get_line().\n"); - exit(-1); - } - buf[bytes_read] = '\0'; - page = buf; - } else { - if (!end_reached) - end_reached = 1; + if (!end_reached) { + end_reached = 1; break; } } else if (i < MAX_LEN) @@ -515,19 +379,13 @@ static char *get_line(void) /* * Print current position */ -static void print_position(WINDOW * win, int height, int width) +static void print_position(WINDOW * win) { - int fpos, percent; + int percent; - if ((fpos = lseek(fd, 0, SEEK_CUR)) == -1) { - endwin(); - fprintf(stderr, "\nError moving file pointer in print_position().\n"); - exit(-1); - } - wattrset(win, position_indicator_attr); - wbkgdset(win, position_indicator_attr & A_COLOR); - percent = !file_size ? - 100 : ((fpos - bytes_read + page - buf) * 100) / file_size; - wmove(win, height - 3, width - 9); + wattrset(win, dlg.position_indicator.atr); + wbkgdset(win, dlg.position_indicator.atr & A_COLOR); + percent = (page - buf) * 100 / strlen(buf); + wmove(win, getmaxy(win) - 3, getmaxx(win) - 9); wprintw(win, "(%3d%%)", percent); } diff --git a/scripts/kconfig/lxdialog/util.c b/scripts/kconfig/lxdialog/util.c index f82cebb9ff0..ebc781b493d 100644 --- a/scripts/kconfig/lxdialog/util.c +++ b/scripts/kconfig/lxdialog/util.c @@ -21,85 +21,217 @@ #include "dialog.h" -/* use colors by default? */ -bool use_colors = 1; +struct dialog_info dlg; -const char *backtitle = NULL; +static void set_mono_theme(void) +{ + dlg.screen.atr = A_NORMAL; + dlg.shadow.atr = A_NORMAL; + dlg.dialog.atr = A_NORMAL; + dlg.title.atr = A_BOLD; + dlg.border.atr = A_NORMAL; + dlg.button_active.atr = A_REVERSE; + dlg.button_inactive.atr = A_DIM; + dlg.button_key_active.atr = A_REVERSE; + dlg.button_key_inactive.atr = A_BOLD; + dlg.button_label_active.atr = A_REVERSE; + dlg.button_label_inactive.atr = A_NORMAL; + dlg.inputbox.atr = A_NORMAL; + dlg.inputbox_border.atr = A_NORMAL; + dlg.searchbox.atr = A_NORMAL; + dlg.searchbox_title.atr = A_BOLD; + dlg.searchbox_border.atr = A_NORMAL; + dlg.position_indicator.atr = A_BOLD; + dlg.menubox.atr = A_NORMAL; + dlg.menubox_border.atr = A_NORMAL; + dlg.item.atr = A_NORMAL; + dlg.item_selected.atr = A_REVERSE; + dlg.tag.atr = A_BOLD; + dlg.tag_selected.atr = A_REVERSE; + dlg.tag_key.atr = A_BOLD; + dlg.tag_key_selected.atr = A_REVERSE; + dlg.check.atr = A_BOLD; + dlg.check_selected.atr = A_REVERSE; + dlg.uarrow.atr = A_BOLD; + dlg.darrow.atr = A_BOLD; +} + +#define DLG_COLOR(dialog, f, b, h) \ +do { \ + dlg.dialog.fg = (f); \ + dlg.dialog.bg = (b); \ + dlg.dialog.hl = (h); \ +} while (0) + +static void set_classic_theme(void) +{ + DLG_COLOR(screen, COLOR_CYAN, COLOR_BLUE, true); + DLG_COLOR(shadow, COLOR_BLACK, COLOR_BLACK, true); + DLG_COLOR(dialog, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(title, COLOR_YELLOW, COLOR_WHITE, true); + DLG_COLOR(border, COLOR_WHITE, COLOR_WHITE, true); + DLG_COLOR(button_active, COLOR_WHITE, COLOR_BLUE, true); + DLG_COLOR(button_inactive, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(button_key_active, COLOR_WHITE, COLOR_BLUE, true); + DLG_COLOR(button_key_inactive, COLOR_RED, COLOR_WHITE, false); + DLG_COLOR(button_label_active, COLOR_YELLOW, COLOR_BLUE, true); + DLG_COLOR(button_label_inactive, COLOR_BLACK, COLOR_WHITE, true); + DLG_COLOR(inputbox, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(inputbox_border, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(searchbox, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(searchbox_title, COLOR_YELLOW, COLOR_WHITE, true); + DLG_COLOR(searchbox_border, COLOR_WHITE, COLOR_WHITE, true); + DLG_COLOR(position_indicator, COLOR_YELLOW, COLOR_WHITE, true); + DLG_COLOR(menubox, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(menubox_border, COLOR_WHITE, COLOR_WHITE, true); + DLG_COLOR(item, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(item_selected, COLOR_WHITE, COLOR_BLUE, true); + DLG_COLOR(tag, COLOR_YELLOW, COLOR_WHITE, true); + DLG_COLOR(tag_selected, COLOR_YELLOW, COLOR_BLUE, true); + DLG_COLOR(tag_key, COLOR_YELLOW, COLOR_WHITE, true); + DLG_COLOR(tag_key_selected, COLOR_YELLOW, COLOR_BLUE, true); + DLG_COLOR(check, COLOR_BLACK, COLOR_WHITE, false); + DLG_COLOR(check_selected, COLOR_WHITE, COLOR_BLUE, true); + DLG_COLOR(uarrow, COLOR_GREEN, COLOR_WHITE, true); + DLG_COLOR(darrow, COLOR_GREEN, COLOR_WHITE, true); +} + +static void set_blackbg_theme(void) +{ + DLG_COLOR(screen, COLOR_RED, COLOR_BLACK, true); + DLG_COLOR(shadow, COLOR_BLACK, COLOR_BLACK, false); + DLG_COLOR(dialog, COLOR_WHITE, COLOR_BLACK, false); + DLG_COLOR(title, COLOR_RED, COLOR_BLACK, false); + DLG_COLOR(border, COLOR_BLACK, COLOR_BLACK, true); + + DLG_COLOR(button_active, COLOR_YELLOW, COLOR_RED, false); + DLG_COLOR(button_inactive, COLOR_YELLOW, COLOR_BLACK, false); + DLG_COLOR(button_key_active, COLOR_YELLOW, COLOR_RED, true); + DLG_COLOR(button_key_inactive, COLOR_RED, COLOR_BLACK, false); + DLG_COLOR(button_label_active, COLOR_WHITE, COLOR_RED, false); + DLG_COLOR(button_label_inactive, COLOR_BLACK, COLOR_BLACK, true); + + DLG_COLOR(inputbox, COLOR_YELLOW, COLOR_BLACK, false); + DLG_COLOR(inputbox_border, COLOR_YELLOW, COLOR_BLACK, false); + + DLG_COLOR(searchbox, COLOR_YELLOW, COLOR_BLACK, false); + DLG_COLOR(searchbox_title, COLOR_YELLOW, COLOR_BLACK, true); + DLG_COLOR(searchbox_border, COLOR_BLACK, COLOR_BLACK, true); + + DLG_COLOR(position_indicator, COLOR_RED, COLOR_BLACK, false); + + DLG_COLOR(menubox, COLOR_YELLOW, COLOR_BLACK, false); + DLG_COLOR(menubox_border, COLOR_BLACK, COLOR_BLACK, true); + + DLG_COLOR(item, COLOR_WHITE, COLOR_BLACK, false); + DLG_COLOR(item_selected, COLOR_WHITE, COLOR_RED, false); + + DLG_COLOR(tag, COLOR_RED, COLOR_BLACK, false); + DLG_COLOR(tag_selected, COLOR_YELLOW, COLOR_RED, true); + DLG_COLOR(tag_key, COLOR_RED, COLOR_BLACK, false); + DLG_COLOR(tag_key_selected, COLOR_YELLOW, COLOR_RED, true); + + DLG_COLOR(check, COLOR_YELLOW, COLOR_BLACK, false); + DLG_COLOR(check_selected, COLOR_YELLOW, COLOR_RED, true); + + DLG_COLOR(uarrow, COLOR_RED, COLOR_BLACK, false); + DLG_COLOR(darrow, COLOR_RED, COLOR_BLACK, false); +} + +static void set_bluetitle_theme(void) +{ + set_classic_theme(); + DLG_COLOR(title, COLOR_BLUE, COLOR_WHITE, true); + DLG_COLOR(button_key_active, COLOR_YELLOW, COLOR_BLUE, true); + DLG_COLOR(button_label_active, COLOR_WHITE, COLOR_BLUE, true); + DLG_COLOR(searchbox_title, COLOR_BLUE, COLOR_WHITE, true); + DLG_COLOR(position_indicator, COLOR_BLUE, COLOR_WHITE, true); + DLG_COLOR(tag, COLOR_BLUE, COLOR_WHITE, true); + DLG_COLOR(tag_key, COLOR_BLUE, COLOR_WHITE, true); + +} /* - * Attribute values, default is for mono display + * Select color theme */ -chtype attributes[] = { - A_NORMAL, /* screen_attr */ - A_NORMAL, /* shadow_attr */ - A_NORMAL, /* dialog_attr */ - A_BOLD, /* title_attr */ - A_NORMAL, /* border_attr */ - A_REVERSE, /* button_active_attr */ - A_DIM, /* button_inactive_attr */ - A_REVERSE, /* button_key_active_attr */ - A_BOLD, /* button_key_inactive_attr */ - A_REVERSE, /* button_label_active_attr */ - A_NORMAL, /* button_label_inactive_attr */ - A_NORMAL, /* inputbox_attr */ - A_NORMAL, /* inputbox_border_attr */ - A_NORMAL, /* searchbox_attr */ - A_BOLD, /* searchbox_title_attr */ - A_NORMAL, /* searchbox_border_attr */ - A_BOLD, /* position_indicator_attr */ - A_NORMAL, /* menubox_attr */ - A_NORMAL, /* menubox_border_attr */ - A_NORMAL, /* item_attr */ - A_REVERSE, /* item_selected_attr */ - A_BOLD, /* tag_attr */ - A_REVERSE, /* tag_selected_attr */ - A_BOLD, /* tag_key_attr */ - A_REVERSE, /* tag_key_selected_attr */ - A_BOLD, /* check_attr */ - A_REVERSE, /* check_selected_attr */ - A_BOLD, /* uarrow_attr */ - A_BOLD /* darrow_attr */ -}; - -#include "colors.h" +static int set_theme(const char *theme) +{ + int use_color = 1; + if (!theme) + set_bluetitle_theme(); + else if (strcmp(theme, "classic") == 0) + set_classic_theme(); + else if (strcmp(theme, "bluetitle") == 0) + set_bluetitle_theme(); + else if (strcmp(theme, "blackbg") == 0) + set_blackbg_theme(); + else if (strcmp(theme, "mono") == 0) + use_color = 0; + + return use_color; +} + +static void init_one_color(struct dialog_color *color) +{ + static int pair = 0; + + pair++; + init_pair(pair, color->fg, color->bg); + if (color->hl) + color->atr = A_BOLD | COLOR_PAIR(pair); + else + color->atr = COLOR_PAIR(pair); +} + +static void init_dialog_colors(void) +{ + init_one_color(&dlg.screen); + init_one_color(&dlg.shadow); + init_one_color(&dlg.dialog); + init_one_color(&dlg.title); + init_one_color(&dlg.border); + init_one_color(&dlg.button_active); + init_one_color(&dlg.button_inactive); + init_one_color(&dlg.button_key_active); + init_one_color(&dlg.button_key_inactive); + init_one_color(&dlg.button_label_active); + init_one_color(&dlg.button_label_inactive); + init_one_color(&dlg.inputbox); + init_one_color(&dlg.inputbox_border); + init_one_color(&dlg.searchbox); + init_one_color(&dlg.searchbox_title); + init_one_color(&dlg.searchbox_border); + init_one_color(&dlg.position_indicator); + init_one_color(&dlg.menubox); + init_one_color(&dlg.menubox_border); + init_one_color(&dlg.item); + init_one_color(&dlg.item_selected); + init_one_color(&dlg.tag); + init_one_color(&dlg.tag_selected); + init_one_color(&dlg.tag_key); + init_one_color(&dlg.tag_key_selected); + init_one_color(&dlg.check); + init_one_color(&dlg.check_selected); + init_one_color(&dlg.uarrow); + init_one_color(&dlg.darrow); +} /* - * Table of color values + * Setup for color display */ -int color_table[][3] = { - {SCREEN_FG, SCREEN_BG, SCREEN_HL}, - {SHADOW_FG, SHADOW_BG, SHADOW_HL}, - {DIALOG_FG, DIALOG_BG, DIALOG_HL}, - {TITLE_FG, TITLE_BG, TITLE_HL}, - {BORDER_FG, BORDER_BG, BORDER_HL}, - {BUTTON_ACTIVE_FG, BUTTON_ACTIVE_BG, BUTTON_ACTIVE_HL}, - {BUTTON_INACTIVE_FG, BUTTON_INACTIVE_BG, BUTTON_INACTIVE_HL}, - {BUTTON_KEY_ACTIVE_FG, BUTTON_KEY_ACTIVE_BG, BUTTON_KEY_ACTIVE_HL}, - {BUTTON_KEY_INACTIVE_FG, BUTTON_KEY_INACTIVE_BG, - BUTTON_KEY_INACTIVE_HL}, - {BUTTON_LABEL_ACTIVE_FG, BUTTON_LABEL_ACTIVE_BG, - BUTTON_LABEL_ACTIVE_HL}, - {BUTTON_LABEL_INACTIVE_FG, BUTTON_LABEL_INACTIVE_BG, - BUTTON_LABEL_INACTIVE_HL}, - {INPUTBOX_FG, INPUTBOX_BG, INPUTBOX_HL}, - {INPUTBOX_BORDER_FG, INPUTBOX_BORDER_BG, INPUTBOX_BORDER_HL}, - {SEARCHBOX_FG, SEARCHBOX_BG, SEARCHBOX_HL}, - {SEARCHBOX_TITLE_FG, SEARCHBOX_TITLE_BG, SEARCHBOX_TITLE_HL}, - {SEARCHBOX_BORDER_FG, SEARCHBOX_BORDER_BG, SEARCHBOX_BORDER_HL}, - {POSITION_INDICATOR_FG, POSITION_INDICATOR_BG, POSITION_INDICATOR_HL}, - {MENUBOX_FG, MENUBOX_BG, MENUBOX_HL}, - {MENUBOX_BORDER_FG, MENUBOX_BORDER_BG, MENUBOX_BORDER_HL}, - {ITEM_FG, ITEM_BG, ITEM_HL}, - {ITEM_SELECTED_FG, ITEM_SELECTED_BG, ITEM_SELECTED_HL}, - {TAG_FG, TAG_BG, TAG_HL}, - {TAG_SELECTED_FG, TAG_SELECTED_BG, TAG_SELECTED_HL}, - {TAG_KEY_FG, TAG_KEY_BG, TAG_KEY_HL}, - {TAG_KEY_SELECTED_FG, TAG_KEY_SELECTED_BG, TAG_KEY_SELECTED_HL}, - {CHECK_FG, CHECK_BG, CHECK_HL}, - {CHECK_SELECTED_FG, CHECK_SELECTED_BG, CHECK_SELECTED_HL}, - {UARROW_FG, UARROW_BG, UARROW_HL}, - {DARROW_FG, DARROW_BG, DARROW_HL}, -}; /* color_table */ +static void color_setup(const char *theme) +{ + if (set_theme(theme)) { + if (has_colors()) { /* Terminal supports color? */ + start_color(); + init_dialog_colors(); + } + } + else + { + set_mono_theme(); + } +} /* * Set window to attribute 'attr' @@ -119,13 +251,13 @@ void attr_clear(WINDOW * win, int height, int width, chtype attr) void dialog_clear(void) { - attr_clear(stdscr, LINES, COLS, screen_attr); + attr_clear(stdscr, LINES, COLS, dlg.screen.atr); /* Display background title if it exists ... - SLH */ - if (backtitle != NULL) { + if (dlg.backtitle != NULL) { int i; - wattrset(stdscr, screen_attr); - mvwaddstr(stdscr, 0, 1, (char *)backtitle); + wattrset(stdscr, dlg.screen.atr); + mvwaddstr(stdscr, 0, 1, (char *)dlg.backtitle); wmove(stdscr, 1, 1); for (i = 1; i < COLS - 1; i++) waddch(stdscr, ACS_HLINE); @@ -136,40 +268,22 @@ void dialog_clear(void) /* * Do some initialization for dialog */ -void init_dialog(void) +void init_dialog(const char *backtitle) +{ + dlg.backtitle = backtitle; + color_setup(getenv("MENUCONFIG_COLOR")); +} + +void reset_dialog(void) { initscr(); /* Init curses */ keypad(stdscr, TRUE); cbreak(); noecho(); - - if (use_colors) /* Set up colors */ - color_setup(); - dialog_clear(); } /* - * Setup for color display - */ -void color_setup(void) -{ - int i; - - if (has_colors()) { /* Terminal supports color? */ - start_color(); - - /* Initialize color pairs */ - for (i = 0; i < ATTRIBUTE_COUNT; i++) - init_pair(i + 1, color_table[i][0], color_table[i][1]); - - /* Setup color attributes */ - for (i = 0; i < ATTRIBUTE_COUNT; i++) - attributes[i] = C_ATTR(color_table[i][2], i + 1); - } -} - -/* * End using dialog functions. */ void end_dialog(void) @@ -184,7 +298,7 @@ void print_title(WINDOW *dialog, const char *title, int width) { if (title) { int tlen = MIN(width - 2, strlen(title)); - wattrset(dialog, title_attr); + wattrset(dialog, dlg.title.atr); mvwaddch(dialog, 0, (width - tlen) / 2 - 1, ' '); mvwaddnstr(dialog, 0, (width - tlen)/2, title, tlen); waddch(dialog, ' '); @@ -264,21 +378,23 @@ void print_button(WINDOW * win, const char *label, int y, int x, int selected) int i, temp; wmove(win, y, x); - wattrset(win, selected ? button_active_attr : button_inactive_attr); + wattrset(win, selected ? dlg.button_active.atr + : dlg.button_inactive.atr); waddstr(win, "<"); temp = strspn(label, " "); label += temp; - wattrset(win, selected ? button_label_active_attr - : button_label_inactive_attr); + wattrset(win, selected ? dlg.button_label_active.atr + : dlg.button_label_inactive.atr); for (i = 0; i < temp; i++) waddch(win, ' '); - wattrset(win, selected ? button_key_active_attr - : button_key_inactive_attr); + wattrset(win, selected ? dlg.button_key_active.atr + : dlg.button_key_inactive.atr); waddch(win, label[0]); - wattrset(win, selected ? button_label_active_attr - : button_label_inactive_attr); + wattrset(win, selected ? dlg.button_label_active.atr + : dlg.button_label_inactive.atr); waddstr(win, (char *)label + 1); - wattrset(win, selected ? button_active_attr : button_inactive_attr); + wattrset(win, selected ? dlg.button_active.atr + : dlg.button_inactive.atr); waddstr(win, ">"); wmove(win, y, x + temp + 1); } @@ -326,7 +442,7 @@ void draw_shadow(WINDOW * win, int y, int x, int height, int width) int i; if (has_colors()) { /* Whether terminal supports color? */ - wattrset(win, shadow_attr); + wattrset(win, dlg.shadow.atr); wmove(win, y + height, x + 2); for (i = 0; i < width; i++) waddch(win, winch(win) & A_CHARTEXT); @@ -360,3 +476,167 @@ int first_alpha(const char *string, const char *exempt) return 0; } + +/* + * ncurses uses ESC to detect escaped char sequences. This resutl in + * a small timeout before ESC is actually delivered to the application. + * lxdialog suggest <ESC> <ESC> which is correctly translated to two + * times esc. But then we need to ignore the second esc to avoid stepping + * out one menu too much. Filter away all escaped key sequences since + * keypad(FALSE) turn off ncurses support for escape sequences - and thats + * needed to make notimeout() do as expected. + */ +int on_key_esc(WINDOW *win) +{ + int key; + int key2; + int key3; + + nodelay(win, TRUE); + keypad(win, FALSE); + key = wgetch(win); + key2 = wgetch(win); + do { + key3 = wgetch(win); + } while (key3 != ERR); + nodelay(win, FALSE); + keypad(win, TRUE); + if (key == KEY_ESC && key2 == ERR) + return KEY_ESC; + else if (key != ERR && key != KEY_ESC && key2 == ERR) + ungetch(key); + + return -1; +} + +/* redraw screen in new size */ +int on_key_resize(void) +{ + dialog_clear(); + return KEY_RESIZE; +} + +struct dialog_list *item_cur; +struct dialog_list item_nil; +struct dialog_list *item_head; + +void item_reset(void) +{ + struct dialog_list *p, *next; + + for (p = item_head; p; p = next) { + next = p->next; + free(p); + } + item_head = NULL; + item_cur = &item_nil; +} + +void item_make(const char *fmt, ...) +{ + va_list ap; + struct dialog_list *p = malloc(sizeof(*p)); + + if (item_head) + item_cur->next = p; + else + item_head = p; + item_cur = p; + memset(p, 0, sizeof(*p)); + + va_start(ap, fmt); + vsnprintf(item_cur->node.str, sizeof(item_cur->node.str), fmt, ap); + va_end(ap); +} + +void item_add_str(const char *fmt, ...) +{ + va_list ap; + size_t avail; + + avail = sizeof(item_cur->node.str) - strlen(item_cur->node.str); + + va_start(ap, fmt); + vsnprintf(item_cur->node.str + strlen(item_cur->node.str), + avail, fmt, ap); + item_cur->node.str[sizeof(item_cur->node.str) - 1] = '\0'; + va_end(ap); +} + +void item_set_tag(char tag) +{ + item_cur->node.tag = tag; +} +void item_set_data(void *ptr) +{ + item_cur->node.data = ptr; +} + +void item_set_selected(int val) +{ + item_cur->node.selected = val; +} + +int item_activate_selected(void) +{ + item_foreach() + if (item_is_selected()) + return 1; + return 0; +} + +void *item_data(void) +{ + return item_cur->node.data; +} + +char item_tag(void) +{ + return item_cur->node.tag; +} + +int item_count(void) +{ + int n = 0; + struct dialog_list *p; + + for (p = item_head; p; p = p->next) + n++; + return n; +} + +void item_set(int n) +{ + int i = 0; + item_foreach() + if (i++ == n) + return; +} + +int item_n(void) +{ + int n = 0; + struct dialog_list *p; + + for (p = item_head; p; p = p->next) { + if (p == item_cur) + return n; + n++; + } + return 0; +} + +const char *item_str(void) +{ + return item_cur->node.str; +} + +int item_is_selected(void) +{ + return (item_cur->node.selected != 0); +} + +int item_is_tag(char tag) +{ + return (item_cur->node.tag == tag); +} diff --git a/scripts/kconfig/lxdialog/yesno.c b/scripts/kconfig/lxdialog/yesno.c index cb2568aae3e..ee0a04e3e01 100644 --- a/scripts/kconfig/lxdialog/yesno.c +++ b/scripts/kconfig/lxdialog/yesno.c @@ -44,6 +44,12 @@ int dialog_yesno(const char *title, const char *prompt, int height, int width) int i, x, y, key = 0, button = 0; WINDOW *dialog; +do_resize: + if (getmaxy(stdscr) < (height + 4)) + return -ERRDISPLAYTOOSMALL; + if (getmaxx(stdscr) < (width + 4)) + return -ERRDISPLAYTOOSMALL; + /* center dialog box on screen */ x = (COLS - width) / 2; y = (LINES - height) / 2; @@ -53,22 +59,23 @@ int dialog_yesno(const char *title, const char *prompt, int height, int width) dialog = newwin(height, width, y, x); keypad(dialog, TRUE); - draw_box(dialog, 0, 0, height, width, dialog_attr, border_attr); - wattrset(dialog, border_attr); + draw_box(dialog, 0, 0, height, width, + dlg.dialog.atr, dlg.border.atr); + wattrset(dialog, dlg.border.atr); mvwaddch(dialog, height - 3, 0, ACS_LTEE); for (i = 0; i < width - 2; i++) waddch(dialog, ACS_HLINE); - wattrset(dialog, dialog_attr); + wattrset(dialog, dlg.dialog.atr); waddch(dialog, ACS_RTEE); print_title(dialog, title, width); - wattrset(dialog, dialog_attr); + wattrset(dialog, dlg.dialog.atr); print_autowrap(dialog, prompt, width - 2, 1, 3); print_buttons(dialog, height, width, 0); - while (key != ESC) { + while (key != KEY_ESC) { key = wgetch(dialog); switch (key) { case 'Y': @@ -92,11 +99,16 @@ int dialog_yesno(const char *title, const char *prompt, int height, int width) case '\n': delwin(dialog); return button; - case ESC: + case KEY_ESC: + key = on_key_esc(dialog); break; + case KEY_RESIZE: + delwin(dialog); + on_key_resize(); + goto do_resize; } } delwin(dialog); - return -1; /* ESC pressed */ + return key; /* ESC pressed */ } diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 7f973195e79..08a4c7af93e 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -24,6 +24,7 @@ #define LKC_DIRECT_LINK #include "lkc.h" +#include "lxdialog/dialog.h" static char menu_backtitle[128]; static const char mconf_readme[] = N_( @@ -159,7 +160,21 @@ static const char mconf_readme[] = N_( "\n" "Note that this mode can eventually be a little more CPU expensive\n" "(especially with a larger number of unrolled categories) than the\n" -"default mode.\n"), +"default mode.\n" +"\n" +"Different color themes available\n" +"--------------------------------\n" +"It is possible to select different color themes using the variable\n" +"MENUCONFIG_COLOR. To select a theme use:\n" +"\n" +"make MENUCONFIG_COLOR=<theme> menuconfig\n" +"\n" +"Available themes are\n" +" mono => selects colors suitable for monochrome displays\n" +" blackbg => selects a color scheme with black background\n" +" classic => theme with blue background. The classic look\n" +" bluetitle => a LCD friendly version of classic. (default)\n" +"\n"), menu_instructions[] = N_( "Arrow keys navigate the menu. " "<Enter> selects submenus --->. " @@ -256,16 +271,12 @@ search_help[] = N_( " USB$ => find all CONFIG_ symbols ending with USB\n" "\n"); -static char buf[4096], *bufptr = buf; -static char input_buf[4096]; static char filename[PATH_MAX+1] = ".config"; -static char *args[1024], **argptr = args; static int indent; static struct termios ios_org; static int rows = 0, cols = 0; static struct menu *current_menu; static int child_count; -static int do_resize; static int single_menu_mode; static void conf(struct menu *menu); @@ -276,12 +287,6 @@ static void conf_save(void); static void show_textbox(const char *title, const char *text, int r, int c); static void show_helptext(const char *title, const char *text); static void show_help(struct menu *menu); -static void show_file(const char *filename, const char *title, int r, int c); - -static void cprint_init(void); -static int cprint1(const char *fmt, ...); -static void cprint_done(void); -static int cprint(const char *fmt, ...); static void init_wsize(void) { @@ -318,54 +323,6 @@ static void init_wsize(void) cols -= 5; } -static void cprint_init(void) -{ - bufptr = buf; - argptr = args; - memset(args, 0, sizeof(args)); - indent = 0; - child_count = 0; - cprint("./scripts/kconfig/lxdialog/lxdialog"); - cprint("--backtitle"); - cprint(menu_backtitle); -} - -static int cprint1(const char *fmt, ...) -{ - va_list ap; - int res; - - if (!*argptr) - *argptr = bufptr; - va_start(ap, fmt); - res = vsprintf(bufptr, fmt, ap); - va_end(ap); - bufptr += res; - - return res; -} - -static void cprint_done(void) -{ - *bufptr++ = 0; - argptr++; -} - -static int cprint(const char *fmt, ...) -{ - va_list ap; - int res; - - *argptr++ = bufptr; - va_start(ap, fmt); - res = vsprintf(bufptr, fmt, ap); - va_end(ap); - bufptr += res; - *bufptr++ = 0; - - return res; -} - static void get_prompt_str(struct gstr *r, struct property *prop) { int i, j; @@ -438,108 +395,17 @@ static struct gstr get_relations_str(struct symbol **sym_arr) return res; } -pid_t pid; - -static void winch_handler(int sig) -{ - if (!do_resize) { - kill(pid, SIGINT); - do_resize = 1; - } -} - -static int exec_conf(void) -{ - int pipefd[2], stat, size; - struct sigaction sa; - sigset_t sset, osset; - - sigemptyset(&sset); - sigaddset(&sset, SIGINT); - sigprocmask(SIG_BLOCK, &sset, &osset); - - signal(SIGINT, SIG_DFL); - - sa.sa_handler = winch_handler; - sigemptyset(&sa.sa_mask); - sa.sa_flags = SA_RESTART; - sigaction(SIGWINCH, &sa, NULL); - - *argptr++ = NULL; - - pipe(pipefd); - pid = fork(); - if (pid == 0) { - sigprocmask(SIG_SETMASK, &osset, NULL); - dup2(pipefd[1], 2); - close(pipefd[0]); - close(pipefd[1]); - execv(args[0], args); - _exit(EXIT_FAILURE); - } - - close(pipefd[1]); - bufptr = input_buf; - while (1) { - size = input_buf + sizeof(input_buf) - bufptr; - size = read(pipefd[0], bufptr, size); - if (size <= 0) { - if (size < 0) { - if (errno == EINTR || errno == EAGAIN) - continue; - perror("read"); - } - break; - } - bufptr += size; - } - *bufptr++ = 0; - close(pipefd[0]); - waitpid(pid, &stat, 0); - - if (do_resize) { - init_wsize(); - do_resize = 0; - sigprocmask(SIG_SETMASK, &osset, NULL); - return -1; - } - if (WIFSIGNALED(stat)) { - printf("\finterrupted(%d)\n", WTERMSIG(stat)); - exit(1); - } -#if 0 - printf("\fexit state: %d\nexit data: '%s'\n", WEXITSTATUS(stat), input_buf); - sleep(1); -#endif - sigpending(&sset); - if (sigismember(&sset, SIGINT)) { - printf("\finterrupted\n"); - exit(1); - } - sigprocmask(SIG_SETMASK, &osset, NULL); - - return WEXITSTATUS(stat); -} - static void search_conf(void) { struct symbol **sym_arr; - int stat; struct gstr res; - + int dres; again: - cprint_init(); - cprint("--title"); - cprint(_("Search Configuration Parameter")); - cprint("--inputbox"); - cprint(_("Enter CONFIG_ (sub)string to search for (omit CONFIG_)")); - cprint("10"); - cprint("75"); - cprint(""); - stat = exec_conf(); - if (stat < 0) - goto again; - switch (stat) { + dialog_clear(); + dres = dialog_inputbox(_("Search Configuration Parameter"), + _("Enter CONFIG_ (sub)string to search for (omit CONFIG_)"), + 10, 75, ""); + switch (dres) { case 0: break; case 1: @@ -549,7 +415,7 @@ again: return; } - sym_arr = sym_re_search(input_buf); + sym_arr = sym_re_search(dialog_input_result); res = get_relations_str(sym_arr); free(sym_arr); show_textbox(_("Search Results"), str_get(&res), 0, 0); @@ -576,24 +442,24 @@ static void build_conf(struct menu *menu) switch (prop->type) { case P_MENU: child_count++; - cprint("m%p", menu); - if (single_menu_mode) { - cprint1("%s%*c%s", - menu->data ? "-->" : "++>", - indent + 1, ' ', prompt); + item_make("%s%*c%s", + menu->data ? "-->" : "++>", + indent + 1, ' ', prompt); } else - cprint1(" %*c%s --->", indent + 1, ' ', prompt); + item_make(" %*c%s --->", indent + 1, ' ', prompt); - cprint_done(); + item_set_tag('m'); + item_set_data(menu); if (single_menu_mode && menu->data) goto conf_childs; return; default: if (prompt) { child_count++; - cprint(":%p", menu); - cprint("---%*c%s", indent + 1, ' ', prompt); + item_make("---%*c%s", indent + 1, ' ', prompt); + item_set_tag(':'); + item_set_data(menu); } } } else @@ -614,10 +480,9 @@ static void build_conf(struct menu *menu) val = sym_get_tristate_value(sym); if (sym_is_changable(sym)) { - cprint("t%p", menu); switch (type) { case S_BOOLEAN: - cprint1("[%c]", val == no ? ' ' : '*'); + item_make("[%c]", val == no ? ' ' : '*'); break; case S_TRISTATE: switch (val) { @@ -625,84 +490,87 @@ static void build_conf(struct menu *menu) case mod: ch = 'M'; break; default: ch = ' '; break; } - cprint1("<%c>", ch); + item_make("<%c>", ch); break; } + item_set_tag('t'); + item_set_data(menu); } else { - cprint("%c%p", def_menu ? 't' : ':', menu); - cprint1(" "); + item_make(" "); + item_set_tag(def_menu ? 't' : ':'); + item_set_data(menu); } - cprint1("%*c%s", indent + 1, ' ', menu_get_prompt(menu)); + item_add_str("%*c%s", indent + 1, ' ', menu_get_prompt(menu)); if (val == yes) { if (def_menu) { - cprint1(" (%s)", menu_get_prompt(def_menu)); - cprint1(" --->"); - cprint_done(); + item_add_str(" (%s)", menu_get_prompt(def_menu)); + item_add_str(" --->"); if (def_menu->list) { indent += 2; build_conf(def_menu); indent -= 2; } - } else - cprint_done(); + } return; } - cprint_done(); } else { if (menu == current_menu) { - cprint(":%p", menu); - cprint("---%*c%s", indent + 1, ' ', menu_get_prompt(menu)); + item_make("---%*c%s", indent + 1, ' ', menu_get_prompt(menu)); + item_set_tag(':'); + item_set_data(menu); goto conf_childs; } child_count++; val = sym_get_tristate_value(sym); if (sym_is_choice_value(sym) && val == yes) { - cprint(":%p", menu); - cprint1(" "); + item_make(" "); + item_set_tag(':'); + item_set_data(menu); } else { switch (type) { case S_BOOLEAN: - cprint("t%p", menu); if (sym_is_changable(sym)) - cprint1("[%c]", val == no ? ' ' : '*'); + item_make("[%c]", val == no ? ' ' : '*'); else - cprint1("---"); + item_make("---"); + item_set_tag('t'); + item_set_data(menu); break; case S_TRISTATE: - cprint("t%p", menu); switch (val) { case yes: ch = '*'; break; case mod: ch = 'M'; break; default: ch = ' '; break; } if (sym_is_changable(sym)) - cprint1("<%c>", ch); + item_make("<%c>", ch); else - cprint1("---"); + item_make("---"); + item_set_tag('t'); + item_set_data(menu); break; default: - cprint("s%p", menu); - tmp = cprint1("(%s)", sym_get_string_value(sym)); + tmp = 2 + strlen(sym_get_string_value(sym)); /* () = 2 */ + item_make("(%s)", sym_get_string_value(sym)); tmp = indent - tmp + 4; if (tmp < 0) tmp = 0; - cprint1("%*c%s%s", tmp, ' ', menu_get_prompt(menu), - (sym_has_value(sym) || !sym_is_changable(sym)) ? - "" : " (NEW)"); - cprint_done(); + item_add_str("%*c%s%s", tmp, ' ', menu_get_prompt(menu), + (sym_has_value(sym) || !sym_is_changable(sym)) ? + "" : " (NEW)"); + item_set_tag('s'); + item_set_data(menu); goto conf_childs; } } - cprint1("%*c%s%s", indent + 1, ' ', menu_get_prompt(menu), - (sym_has_value(sym) || !sym_is_changable(sym)) ? - "" : " (NEW)"); + item_add_str("%*c%s%s", indent + 1, ' ', menu_get_prompt(menu), + (sym_has_value(sym) || !sym_is_changable(sym)) ? + "" : " (NEW)"); if (menu->prompt->type == P_MENU) { - cprint1(" --->"); - cprint_done(); + item_add_str(" --->"); return; } - cprint_done(); } conf_childs: @@ -717,59 +585,45 @@ static void conf(struct menu *menu) struct menu *submenu; const char *prompt = menu_get_prompt(menu); struct symbol *sym; - char active_entry[40]; - int stat, type, i; + struct menu *active_menu = NULL; + int res; + int s_scroll = 0; - unlink("lxdialog.scrltmp"); - active_entry[0] = 0; while (1) { - cprint_init(); - cprint("--title"); - cprint("%s", prompt ? prompt : _("Main Menu")); - cprint("--menu"); - cprint(_(menu_instructions)); - cprint("%d", rows); - cprint("%d", cols); - cprint("%d", rows - 10); - cprint("%s", active_entry); + item_reset(); current_menu = menu; build_conf(menu); if (!child_count) break; if (menu == &rootmenu) { - cprint(":"); - cprint("--- "); - cprint("L"); - cprint(_(" Load an Alternate Configuration File")); - cprint("S"); - cprint(_(" Save Configuration to an Alternate File")); + item_make("--- "); + item_set_tag(':'); + item_make(_(" Load an Alternate Configuration File")); + item_set_tag('L'); + item_make(_(" Save an Alternate Configuration File")); + item_set_tag('S'); } - stat = exec_conf(); - if (stat < 0) - continue; - - if (stat == 1 || stat == 255) + dialog_clear(); + res = dialog_menu(prompt ? prompt : _("Main Menu"), + _(menu_instructions), + active_menu, &s_scroll); + if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL) break; - - type = input_buf[0]; - if (!type) + if (!item_activate_selected()) + continue; + if (!item_tag()) continue; - for (i = 0; input_buf[i] && !isspace(input_buf[i]); i++) - ; - if (i >= sizeof(active_entry)) - i = sizeof(active_entry) - 1; - input_buf[i] = 0; - strcpy(active_entry, input_buf); - - sym = NULL; - submenu = NULL; - if (sscanf(input_buf + 1, "%p", &submenu) == 1) + submenu = item_data(); + active_menu = item_data(); + if (submenu) sym = submenu->sym; + else + sym = NULL; - switch (stat) { + switch (res) { case 0: - switch (type) { + switch (item_tag()) { case 'm': if (single_menu_mode) submenu->data = (void *) (long) !submenu->data; @@ -800,7 +654,7 @@ static void conf(struct menu *menu) show_helptext("README", _(mconf_readme)); break; case 3: - if (type == 't') { + if (item_is_tag('t')) { if (sym_set_tristate_value(sym, yes)) break; if (sym_set_tristate_value(sym, mod)) @@ -808,17 +662,17 @@ static void conf(struct menu *menu) } break; case 4: - if (type == 't') + if (item_is_tag('t')) sym_set_tristate_value(sym, no); break; case 5: - if (type == 't') + if (item_is_tag('t')) sym_set_tristate_value(sym, mod); break; case 6: - if (type == 't') + if (item_is_tag('t')) sym_toggle_tristate_value(sym); - else if (type == 'm') + else if (item_is_tag('m')) conf(submenu); break; case 7: @@ -830,13 +684,8 @@ static void conf(struct menu *menu) static void show_textbox(const char *title, const char *text, int r, int c) { - int fd; - - fd = creat(".help.tmp", 0777); - write(fd, text, strlen(text)); - close(fd); - show_file(".help.tmp", title, r, c); - unlink(".help.tmp"); + dialog_clear(); + dialog_textbox(title, text, r, c); } static void show_helptext(const char *title, const char *text) @@ -864,68 +713,52 @@ static void show_help(struct menu *menu) str_free(&help); } -static void show_file(const char *filename, const char *title, int r, int c) -{ - do { - cprint_init(); - if (title) { - cprint("--title"); - cprint("%s", title); - } - cprint("--textbox"); - cprint("%s", filename); - cprint("%d", r ? r : rows); - cprint("%d", c ? c : cols); - } while (exec_conf() < 0); -} - static void conf_choice(struct menu *menu) { const char *prompt = menu_get_prompt(menu); struct menu *child; struct symbol *active; - int stat; active = sym_get_choice_value(menu->sym); while (1) { - cprint_init(); - cprint("--title"); - cprint("%s", prompt ? prompt : _("Main Menu")); - cprint("--radiolist"); - cprint(_(radiolist_instructions)); - cprint("15"); - cprint("70"); - cprint("6"); + int res; + int selected; + item_reset(); current_menu = menu; for (child = menu->list; child; child = child->next) { if (!menu_is_visible(child)) continue; - cprint("%p", child); - cprint("%s", menu_get_prompt(child)); + item_make("%s", menu_get_prompt(child)); + item_set_data(child); + if (child->sym == active) + item_set_selected(1); if (child->sym == sym_get_choice_value(menu->sym)) - cprint("ON"); - else if (child->sym == active) - cprint("SELECTED"); - else - cprint("OFF"); + item_set_tag('X'); } - - stat = exec_conf(); - switch (stat) { + dialog_clear(); + res = dialog_checklist(prompt ? prompt : _("Main Menu"), + _(radiolist_instructions), + 15, 70, 6); + selected = item_activate_selected(); + switch (res) { case 0: - if (sscanf(input_buf, "%p", &child) != 1) - break; - sym_set_tristate_value(child->sym, yes); + if (selected) { + child = item_data(); + sym_set_tristate_value(child->sym, yes); + } return; case 1: - if (sscanf(input_buf, "%p", &child) == 1) { + if (selected) { + child = item_data(); show_help(child); active = child->sym; } else show_help(menu); break; - case 255: + case KEY_ESC: + return; + case -ERRDISPLAYTOOSMALL: return; } } @@ -934,40 +767,38 @@ static void conf_choice(struct menu *menu) static void conf_string(struct menu *menu) { const char *prompt = menu_get_prompt(menu); - int stat; while (1) { - cprint_init(); - cprint("--title"); - cprint("%s", prompt ? prompt : _("Main Menu")); - cprint("--inputbox"); + int res; + char *heading; + switch (sym_get_type(menu->sym)) { case S_INT: - cprint(_(inputbox_instructions_int)); + heading = _(inputbox_instructions_int); break; case S_HEX: - cprint(_(inputbox_instructions_hex)); + heading = _(inputbox_instructions_hex); break; case S_STRING: - cprint(_(inputbox_instructions_string)); + heading = _(inputbox_instructions_string); break; default: - /* panic? */; + heading = "Internal mconf error!"; } - cprint("10"); - cprint("75"); - cprint("%s", sym_get_string_value(menu->sym)); - stat = exec_conf(); - switch (stat) { + dialog_clear(); + res = dialog_inputbox(prompt ? prompt : _("Main Menu"), + heading, 10, 75, + sym_get_string_value(menu->sym)); + switch (res) { case 0: - if (sym_set_string_value(menu->sym, input_buf)) + if (sym_set_string_value(menu->sym, dialog_input_result)) return; show_textbox(NULL, _("You have made an invalid entry."), 5, 43); break; case 1: show_help(menu); break; - case 255: + case KEY_ESC: return; } } @@ -975,28 +806,24 @@ static void conf_string(struct menu *menu) static void conf_load(void) { - int stat; while (1) { - cprint_init(); - cprint("--inputbox"); - cprint(load_config_text); - cprint("11"); - cprint("55"); - cprint("%s", filename); - stat = exec_conf(); - switch(stat) { + int res; + dialog_clear(); + res = dialog_inputbox(NULL, load_config_text, + 11, 55, filename); + switch(res) { case 0: - if (!input_buf[0]) + if (!dialog_input_result[0]) return; - if (!conf_read(input_buf)) + if (!conf_read(dialog_input_result)) return; show_textbox(NULL, _("File does not exist!"), 5, 38); break; case 1: show_helptext(_("Load Alternate Configuration"), load_config_help); break; - case 255: + case KEY_ESC: return; } } @@ -1004,28 +831,23 @@ static void conf_load(void) static void conf_save(void) { - int stat; - while (1) { - cprint_init(); - cprint("--inputbox"); - cprint(save_config_text); - cprint("11"); - cprint("55"); - cprint("%s", filename); - stat = exec_conf(); - switch(stat) { + int res; + dialog_clear(); + res = dialog_inputbox(NULL, save_config_text, + 11, 55, filename); + switch(res) { case 0: - if (!input_buf[0]) + if (!dialog_input_result[0]) return; - if (!conf_write(input_buf)) + if (!conf_write(dialog_input_result)) return; show_textbox(NULL, _("Can't create file! Probably a nonexistent directory."), 5, 60); break; case 1: show_helptext(_("Save Alternate Configuration"), save_config_help); break; - case 255: + case KEY_ESC: return; } } @@ -1034,15 +856,13 @@ static void conf_save(void) static void conf_cleanup(void) { tcsetattr(1, TCSAFLUSH, &ios_org); - unlink(".help.tmp"); - unlink("lxdialog.scrltmp"); } int main(int ac, char **av) { struct symbol *sym; char *mode; - int stat; + int res; setlocale(LC_ALL, ""); bindtextdomain(PACKAGE, LOCALEDIR); @@ -1065,18 +885,19 @@ int main(int ac, char **av) tcgetattr(1, &ios_org); atexit(conf_cleanup); init_wsize(); - conf(&rootmenu); - + reset_dialog(); + init_dialog(menu_backtitle); do { - cprint_init(); - cprint("--yesno"); - cprint(_("Do you wish to save your new kernel configuration?")); - cprint("5"); - cprint("60"); - stat = exec_conf(); - } while (stat < 0); - - if (stat == 0) { + conf(&rootmenu); + dialog_clear(); + res = dialog_yesno(NULL, + _("Do you wish to save your " + "new kernel configuration?\n" + "<ESC><ESC> to continue."), + 6, 60); + } while (res == KEY_ESC); + end_dialog(); + if (res == 0) { if (conf_write(NULL)) { fprintf(stderr, _("\n\n" "Error during writing of the kernel configuration.\n" diff --git a/sound/oss/trident.c b/sound/oss/trident.c index ce79cd82478..147c816a1f2 100644 --- a/sound/oss/trident.c +++ b/sound/oss/trident.c @@ -1862,7 +1862,7 @@ trident_read(struct file *file, char __user *buffer, size_t count, loff_t * ppos unsigned swptr; int cnt; - pr_debug("trident: trident_read called, count = %d\n", count); + pr_debug("trident: trident_read called, count = %zd\n", count); VALIDATE_STATE(state); @@ -1978,7 +1978,7 @@ trident_write(struct file *file, const char __user *buffer, size_t count, loff_t unsigned int copy_count; int lret; /* for lock_set_fmt */ - pr_debug("trident: trident_write called, count = %d\n", count); + pr_debug("trident: trident_write called, count = %zd\n", count); VALIDATE_STATE(state); |